diff options
Diffstat (limited to 'drivers/media/platform/Kconfig')
| -rw-r--r-- | drivers/media/platform/Kconfig | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig new file mode 100644 index 00000000000..e1959a8d112 --- /dev/null +++ b/drivers/media/platform/Kconfig @@ -0,0 +1,297 @@ +if MEDIA_CAMERA_SUPPORT + +config VIDEO_VIVI + tristate "Virtual Video Driver" + depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE + select FONT_8x16 + select VIDEOBUF2_VMALLOC + default n + ---help--- + Enables a virtual video driver. This device shows a color bar + and a timestamp, as a real device would generate by using V4L2 + api. + Say Y here if you want to test video apps or debug V4L devices. + In doubt, say N. + +# +# Platform drivers +# All drivers here are currently for webcam support + +menuconfig V4L_PLATFORM_DRIVERS + bool "V4L platform devices" + depends on MEDIA_CAMERA_SUPPORT + default n + ---help--- + Say Y here to enable support for platform-specific V4L drivers. + +if V4L_PLATFORM_DRIVERS + +source "drivers/media/platform/marvell-ccic/Kconfig" + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + +# +# Platform multimedia device configuration +# + +source "drivers/media/platform/davinci/Kconfig" + +source "drivers/media/platform/omap/Kconfig" + +source "drivers/media/platform/blackfin/Kconfig" + +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on VIDEO_DEV && ARCH_SHMOBILE + select VIDEOBUF_DMA_CONTIG + help + Support for the Video Output Unit (VOU) on SuperH SoCs. + +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x + select VIDEOBUF_DMA_CONTIG + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. + + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. + +config VIDEO_TIMBERDALE + tristate "Support for timberdale Video In/LogiWIN" + depends on VIDEO_V4L2 && I2C && DMADEVICES + select DMA_ENGINE + select TIMB_DMA + select VIDEO_ADV7180 + select VIDEOBUF_DMA_CONTIG + ---help--- + Add support for the Video In peripherial of the timberdale FPGA. + +config VIDEO_VINO + tristate "SGI Vino Video For Linux" + depends on I2C && SGI_IP22 && VIDEO_V4L2 + select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO + help + Say Y here to build in support for the Vino video input system found + on SGI Indy machines. + +config VIDEO_M32R_AR + tristate "AR devices" + depends on M32R && VIDEO_V4L2 + ---help--- + This is a video4linux driver for the Renesas AR (Artificial Retina) + camera module. + +config VIDEO_M32R_AR_M64278 + tristate "AR device with color module M64278(VGA)" + depends on PLAT_M32700UT + select VIDEO_M32R_AR + ---help--- + This is a video4linux driver for the Renesas AR (Artificial + Retina) with M64278E-800 camera module. + This module supports VGA(640x480 pixels) resolutions. + + To compile this driver as a module, choose M here: the + module will be called arv. + +config VIDEO_OMAP3 + tristate "OMAP 3 Camera support (EXPERIMENTAL)" + depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL + ---help--- + Driver for an OMAP 3 camera controller. + +config VIDEO_OMAP3_DEBUG + bool "OMAP 3 Camera debug messages" + depends on VIDEO_OMAP3 + ---help--- + Enable debug messages on OMAP 3 camera controller driver. + +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA && I2C + select VIDEOBUF_GEN + select VIDEOBUF2_CORE + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + + +config SOC_CAMERA_PLATFORM + tristate "platform camera support" + depends on SOC_CAMERA + help + This is a generic SoC camera platform driver, useful for testing + +config MX1_VIDEO + bool + +config VIDEO_MX1 + tristate "i.MX1/i.MXL CMOS Sensor Interface driver" + depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA + select FIQ + select VIDEOBUF_DMA_CONTIG + select MX1_VIDEO + ---help--- + This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface + +config MX3_VIDEO + bool + +config VIDEO_MX3 + tristate "i.MX3x Camera Sensor Interface driver" + depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA + select VIDEOBUF2_DMA_CONTIG + select MX3_VIDEO + ---help--- + This is a v4l2 driver for the i.MX3x Camera Sensor Interface + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x && SOC_CAMERA + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + +config VIDEO_SH_MOBILE_CSI2 + tristate "SuperH Mobile MIPI CSI-2 Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK + ---help--- + This is a v4l2 driver for the SuperH MIPI CSI-2 Interface + +config VIDEO_SH_MOBILE_CEU + tristate "SuperH Mobile CEU Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK + select VIDEOBUF2_DMA_CONTIG + ---help--- + This is a v4l2 driver for the SuperH Mobile CEU Interface + +config VIDEO_OMAP1 + tristate "OMAP1 Camera Interface driver" + depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA + select VIDEOBUF_DMA_CONTIG + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP1 camera interface + +config VIDEO_OMAP2 + tristate "OMAP2 Camera Capture Interface driver" + depends on VIDEO_DEV && ARCH_OMAP2 + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP2 camera capture interface + +config VIDEO_MX2_HOSTSUPPORT + bool + +config VIDEO_MX2 + tristate "i.MX27/i.MX25 Camera Sensor Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN)) + select VIDEOBUF2_DMA_CONTIG + select VIDEO_MX2_HOSTSUPPORT + ---help--- + This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor + Interface + +config VIDEO_ATMEL_ISI + tristate "ATMEL Image Sensor Interface (ISI) support" + depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91 + select VIDEOBUF2_DMA_CONTIG + ---help--- + This module makes the ATMEL Image Sensor Interface available + as a v4l2 device. + +source "drivers/media/platform/s5p-fimc/Kconfig" +source "drivers/media/platform/s5p-tv/Kconfig" + +endif # V4L_PLATFORM_DRIVERS + +menuconfig V4L_MEM2MEM_DRIVERS + bool "Memory-to-memory multimedia devices" + depends on VIDEO_V4L2 + default n + ---help--- + Say Y here to enable selecting drivers for V4L devices that + use system memory for both source and destination buffers, as opposed + to capture and output drivers, which use memory buffers for just + one of those. + +if V4L_MEM2MEM_DRIVERS + +config VIDEO_MEM2MEM_TESTDEV + tristate "Virtual test device for mem2mem framework" + depends on VIDEO_DEV && VIDEO_V4L2 + select VIDEOBUF2_VMALLOC + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a virtual test device for the memory-to-memory driver + framework. + +config VIDEO_CODA + tristate "Chips&Media Coda multi-standard codec IP" + depends on VIDEO_DEV && VIDEO_V4L2 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + Coda is a range of video codec IPs that supports + H.264, MPEG-4, and other video formats. + +config VIDEO_MEM2MEM_DEINTERLACE + tristate "Deinterlace support" + depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + Generic deinterlacing V4L2 driver. + +config VIDEO_SAMSUNG_S5P_G2D + tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D + 2d graphics accelerator. + +config VIDEO_SAMSUNG_S5P_JPEG + tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec + +config VIDEO_SAMSUNG_S5P_MFC + tristate "Samsung S5P MFC 5.1 Video Codec" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + default n + help + MFC 5.1 driver for V4L2. + +config VIDEO_MX2_EMMAPRP + tristate "MX2 eMMa-PrP support" + depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + MX2X chips have a PrP that can be used to process buffers from + memory to memory. Operations include resizing and format + conversion. + +endif # V4L_MEM2MEM_DRIVERS + +endif # MEDIA_CAMERA_SUPPORT |