aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/dts/dbx5x0.dtsi10
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi30
-rw-r--r--arch/arm/boot/dts/sun5i-a13-olinuxino.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi23
-rw-r--r--arch/arm/mach-sunxi/Kconfig1
-rw-r--r--arch/arm/mach-ux500/Kconfig6
-rw-r--r--arch/arm/mach-ux500/board-mop500.c20
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c2
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-mop500.h10
10 files changed, 71 insertions, 35 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9bbe760f235..6c0900a9bf5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1636,7 +1636,7 @@ config ARCH_NR_GPIO
default 355 if ARCH_U8500
default 264 if MACH_H4700
default 512 if SOC_OMAP5
- default 288 if ARCH_VT8500
+ default 288 if ARCH_VT8500 || ARCH_SUNXI
default 0
help
Maximum number of GPIOs in the system.
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 63f2fbcfe81..69140ba99f4 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,10 +170,9 @@
gpio-bank = <8>;
};
- pinctrl@80157000 {
- // This is actually the PRCMU base address
- reg = <0x80157000 0x2000>;
- compatible = "stericsson,nmk_pinctrl";
+ pinctrl {
+ compatible = "stericsson,nmk-pinctrl";
+ prcm = <&prcmu>;
};
usb@a03e0000 {
@@ -190,9 +189,10 @@
interrupts = <0 25 0x4>;
};
- prcmu@80157000 {
+ prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x1000>;
+ reg-names = "prcmu";
interrupts = <0 47 0x4>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index e61fdd47bd0..f99f60dadf5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -16,4 +16,34 @@
memory {
reg = <0x40000000 0x80000000>;
};
+
+ soc {
+ pinctrl@01c20800 {
+ compatible = "allwinner,sun4i-a10-pinctrl";
+ reg = <0x01c20800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB22", "PB23";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart0_pins_b: uart0@1 {
+ allwinner,pins = "PF2", "PF4";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PA10", "PA11";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 498a091a4ea..4a1e45d4aac 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -24,6 +24,8 @@
soc {
uart1: uart@01c28400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 59a2d265a98..e1121890fb2 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -17,4 +17,27 @@
memory {
reg = <0x40000000 0x20000000>;
};
+
+ soc {
+ pinctrl@01c20800 {
+ compatible = "allwinner,sun5i-a13-pinctrl";
+ reg = <0x01c20800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PE10", "PE11";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart1_pins_b: uart1@1 {
+ allwinner,pins = "PG3", "PG4";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3fdd0085e30..8709a39bd34 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -7,3 +7,4 @@ config ARCH_SUNXI
select PINCTRL
select SPARSE_IRQ
select SUNXI_TIMER
+ select PINCTRL_SUNXI \ No newline at end of file
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5dea90636d9..3e5bbd0e5b2 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@ config UX500_SOC_COMMON
select COMMON_CLK
select PINCTRL
select PINCTRL_NOMADIK
+ select PINCTRL_ABX500
select PL310_ERRATA_753970 if CACHE_PL310
config UX500_SOC_DB8500
@@ -18,6 +19,11 @@ config UX500_SOC_DB8500
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
+ select PINCTRL_DB8540
+ select PINCTRL_AB8500
+ select PINCTRL_AB8505
+ select PINCTRL_AB9540
+ select PINCTRL_AB8540
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d453522edb0..b8781caa54b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -90,26 +90,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
},
};
-static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
.gpio_base = MOP500_AB8500_PIN_GPIO(1),
- .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
- /* config_reg is the initial configuration of ab8500 pins.
- * The pins can be configured as GPIO or alt functions based
- * on value present in GpioSel1 to GpioSel6 and AlternatFunction
- * register. This is the array of 7 configuration settings.
- * One has to compile time decide these settings. Below is the
- * explanation of these setting
- * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
- * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
- * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
- * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
- * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
- * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
- * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
- * as GPIO then this register selectes the alternate fucntions
- */
- .config_reg = {0x00, 0x1E, 0x80, 0x01,
- 0x7A, 0x00, 0x00},
};
/* ab8500-codec */
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 5b286e06474..b80ad9610e9 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -285,7 +285,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
/* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE,
+ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7d34c52798b..d526dd8e87d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -38,15 +38,7 @@
#define MOP500_STMPE1601_IRQ_END \
MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
-/* AB8500 virtual gpio IRQ */
-#define AB8500_VIR_GPIO_NR_IRQS 16
-
-#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \
- MOP500_STMPE1601_IRQ_END
-#define MOP500_AB8500_VIR_GPIO_IRQ_END \
- (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS)
-
-#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END
+#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END
#define MOP500_IRQ_END MOP500_NR_IRQS
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-08 16:26:30 +0000