diff options
Diffstat (limited to 'arch')
769 files changed, 40865 insertions, 18533 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 213c7850d5f..2b36afd8e96 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -381,7 +381,7 @@ config ALPHA_EV56 config ALPHA_EV56 prompt "EV56 CPU (speed >= 333MHz)?" - depends on ALPHA_NORITAKE && ALPHA_PRIMO + depends on ALPHA_NORITAKE || ALPHA_PRIMO config ALPHA_EV56 prompt "EV56 CPU (speed >= 400MHz)?" diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 917dad1b74c..550f4907d61 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -270,7 +270,7 @@ callback_init(void * kernel_end) void paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; unsigned long dma_pfn, high_pfn; dma_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cce26576999..337c01c4ac3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -284,21 +284,9 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { /* * USB Device Controller */ -static void corgi_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { /* no connect GPIO; corgi can't tell connection status */ - .udc_command = corgi_udc_command, + .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; @@ -350,7 +338,6 @@ static void __init corgi_init(void) corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 88a999df0ab..591fc3187c7 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -177,7 +177,7 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) * Free the page table, if there was one. */ if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE) - pte_free_kernel(pmd_page_kernel(pmd)); + pte_free_kernel(pmd_page_vaddr(pmd)); } addr += PGDIR_SIZE; diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 9b815327b6a..7e8096809be 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -26,7 +26,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/usb_otg.h> +#include <linux/usb/otg.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig new file mode 100644 index 00000000000..5f1694eea84 --- /dev/null +++ b/arch/avr32/Kconfig @@ -0,0 +1,196 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "Linux Kernel Configuration" + +config AVR32 + bool + default y + # With EMBEDDED=n, we get lots of stuff automatically selected + # that we usually don't need on AVR32. + select EMBEDDED + help + AVR32 is a high-performance 32-bit RISC microprocessor core, + designed for cost-sensitive embedded applications, with particular + emphasis on low power consumption and high code density. + + There is an AVR32 Linux project with a web page at + http://avr32linux.org/. + +config UID16 + bool + +config GENERIC_HARDIRQS + bool + default y + +config HARDIRQS_SW_RESEND + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + +config RWSEM_GENERIC_SPINLOCK + bool + default y + +config GENERIC_TIME + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config GENERIC_BUST_SPINLOCK + bool + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +source "init/Kconfig" + +menu "System Type and features" + +config SUBARCH_AVR32B + bool +config MMU + bool +config PERFORMANCE_COUNTERS + bool + +config PLATFORM_AT32AP + bool + select SUBARCH_AVR32B + select MMU + select PERFORMANCE_COUNTERS + +choice + prompt "AVR32 CPU type" + default CPU_AT32AP7000 + +config CPU_AT32AP7000 + bool "AT32AP7000" + select PLATFORM_AT32AP +endchoice + +# +# CPU Daughterboards for ATSTK1000 +config BOARD_ATSTK1002 + bool + +choice + prompt "AVR32 board type" + default BOARD_ATSTK1000 + +config BOARD_ATSTK1000 + bool "ATSTK1000 evaluation board" + select BOARD_ATSTK1002 if CPU_AT32AP7000 +endchoice + +choice + prompt "Boot loader type" + default LOADER_U_BOOT + +config LOADER_U_BOOT + bool "U-Boot (or similar) bootloader" +endchoice + +config LOAD_ADDRESS + hex + default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y + +config ENTRY_ADDRESS + hex + default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y + +config PHYS_OFFSET + hex + default 0x10000000 if CPU_AT32AP7000=y + +source "kernel/Kconfig.preempt" + +config HAVE_ARCH_BOOTMEM_NODE + bool + default n + +config ARCH_HAVE_MEMORY_PRESENT + bool + default n + +config NEED_NODE_MEMMAP_SIZE + bool + default n + +config ARCH_FLATMEM_ENABLE + bool + default y + +config ARCH_DISCONTIGMEM_ENABLE + bool + default n + +config ARCH_SPARSEMEM_ENABLE + bool + default n + +source "mm/Kconfig" + +config OWNERSHIP_TRACE + bool "Ownership trace support" + default y + help + Say Y to generate an Ownership Trace message on every context switch, + enabling Nexus-compliant debuggers to keep track of the PID of the + currently executing task. + +# FPU emulation goes here + +source "kernel/Kconfig.hz" + +config CMDLINE + string "Default kernel command line" + default "" + help + If you don't have a boot loader capable of passing a command line string + to the kernel, you may specify one here. As a minimum, you should specify + the memory size and the root device (e.g., mem=8M, root=/dev/nfs). + +endmenu + +menu "Bus options" + +config PCI + bool + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +endmenu + +menu "Executable file formats" +source "fs/Kconfig.binfmt" +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/avr32/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/avr32/Kconfig.debug b/arch/avr32/Kconfig.debug new file mode 100644 index 00000000000..64ace00fe6c --- /dev/null +++ b/arch/avr32/Kconfig.debug @@ -0,0 +1,19 @@ +menu "Kernel hacking" + +config TRACE_IRQFLAGS_SUPPORT + bool + default y + +source "lib/Kconfig.debug" + +config KPROBES + bool "Kprobes" + depends on DEBUG_KERNEL + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". + +endmenu diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile new file mode 100644 index 00000000000..cefc95a7398 --- /dev/null +++ b/arch/avr32/Makefile @@ -0,0 +1,84 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2004-2006 Atmel Corporation. + +# Default target when executing plain make +.PHONY: all +all: uImage vmlinux.elf linux.lst + +KBUILD_DEFCONFIG := atstk1002_defconfig + +CFLAGS += -pipe -fno-builtin -mno-pic +AFLAGS += -mrelax -mno-pic +CFLAGS_MODULE += -mno-relax +LDFLAGS_vmlinux += --relax + +cpuflags-$(CONFIG_CPU_AP7000) += -mcpu=ap7000 + +CFLAGS += $(cpuflags-y) +AFLAGS += $(cpuflags-y) + +CHECKFLAGS += -D__avr32__ + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o +head-y += arch/avr32/kernel/head.o +core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/ +core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ +core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ +core-y += arch/avr32/kernel/ +core-y += arch/avr32/mm/ +libs-y += arch/avr32/lib/ #$(LIBGCC) + +archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap + +include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf + @echo ' SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)' +ifneq ($(KBUILD_SRC),) + $(Q)mkdir -p include/asm-avr32 + $(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch +else + $(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch +endif + @touch $@ + +archprepare: include/asm-avr32/.arch + +BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec + +.PHONY: $(BOOT_TARGETS) install + +boot := arch/$(ARCH)/boot/images + + KBUILD_IMAGE := $(boot)/uImage +vmlinux.elf: KBUILD_IMAGE := $(boot)/vmlinux.elf +vmlinux.cso: KBUILD_IMAGE := $(boot)/vmlinux.cso +uImage.srec: KBUILD_IMAGE := $(boot)/uImage.srec +uImage: KBUILD_IMAGE := $(boot)/uImage + +quiet_cmd_listing = LST $@ + cmd_listing = avr32-linux-objdump $(OBJDUMPFLAGS) -lS $< > $@ +quiet_cmd_disasm = DIS $@ + cmd_disasm = avr32-linux-objdump $(OBJDUMPFLAGS) -d $< > $@ + +vmlinux.elf vmlinux.bin uImage.srec uImage vmlinux.cso: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +install: vmlinux + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ + +linux.s: vmlinux + $(call if_changed,disasm) + +linux.lst: vmlinux + $(call if_changed,listing) + +define archhelp + @echo '* vmlinux.elf - ELF image with load address 0' + @echo ' vmlinux.cso - PathFinder CSO image' + @echo ' uImage - Create a bootable image for U-Boot' +endef diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile new file mode 100644 index 00000000000..df949948053 --- /dev/null +++ b/arch/avr32/boards/atstk1000/Makefile @@ -0,0 +1,2 @@ +obj-y += setup.o spi.o flash.o +obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c new file mode 100644 index 00000000000..49164e9aadd --- /dev/null +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -0,0 +1,37 @@ +/* + * ATSTK1002 daughterboard-specific init code + * + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> + +#include <asm/arch/board.h> + +struct eth_platform_data __initdata eth0_data = { + .valid = 1, + .mii_phy_addr = 0x10, + .is_rmii = 0, + .hw_addr = { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb }, +}; + +extern struct lcdc_platform_data atstk1000_fb0_data; + +static int __init atstk1002_init(void) +{ + at32_add_system_devices(); + + at32_add_device_usart(1); /* /dev/ttyS0 */ + at32_add_device_usart(2); /* /dev/ttyS1 */ + at32_add_device_usart(3); /* /dev/ttyS2 */ + + at32_add_device_eth(0, ð0_data); + at32_add_device_spi(0); + at32_add_device_lcdc(0, &atstk1000_fb0_data); + + return 0; +} +postcore_initcall(atstk1002_init); diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c new file mode 100644 index 00000000000..aac4300cca1 --- /dev/null +++ b/arch/avr32/boards/atstk1000/flash.c @@ -0,0 +1,95 @@ +/* + * ATSTK1000 board-specific flash initialization + * + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/arch/smc.h> + +static struct smc_config flash_config __initdata = { + .ncs_read_setup = 0, + .nrd_setup = 40, + .ncs_write_setup = 0, + .nwe_setup = 10, + + .ncs_read_pulse = 80, + .nrd_pulse = 40, + .ncs_write_pulse = 65, + .nwe_pulse = 55, + + .read_cycle = 120, + .write_cycle = 120, + + .bus_width = 2, + .nrd_controlled = 1, + .nwe_controlled = 1, + .byte_write = 1, +}; + +static struct mtd_partition flash_parts[] = { + { + .name = "u-boot", + .offset = 0x00000000, + .size = 0x00020000, /* 128 KiB */ + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "root", + .offset = 0x00020000, + .size = 0x007d0000, + }, + { + .name = "env", + .offset = 0x007f0000, + .size = 0x00010000, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(flash_parts), + .parts = flash_parts, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x007fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = 0, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +/* This needs to be called after the SMC has been initialized */ +static int __init atstk1000_flash_init(void) +{ + int ret; + + ret = smc_set_configuration(0, &flash_config); + if (ret < 0) { + printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n"); + return ret; + } + + platform_device_register(&flash_device); + + return 0; +} +device_initcall(atstk1000_flash_init); diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c new file mode 100644 index 00000000000..191ab85de9a --- /dev/null +++ b/arch/avr32/boards/atstk1000/setup.c @@ -0,0 +1,59 @@ +/* + * ATSTK1000 board-specific setup code. + * + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bootmem.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/linkage.h> + +#include <asm/setup.h> + +#include <asm/arch/board.h> + +/* Initialized by bootloader-specific startup code. */ +struct tag *bootloader_tags __initdata; + +struct lcdc_platform_data __initdata atstk1000_fb0_data; + +asmlinkage void __init board_early_init(void) +{ + extern void sdram_init(void); + +#ifdef CONFIG_LOADER_STANDALONE + sdram_init(); +#endif +} + +void __init board_setup_fbmem(unsigned long fbmem_start, + unsigned long fbmem_size) +{ + if (!fbmem_size) + return; + + if (!fbmem_start) { + void *fbmem; + + fbmem = alloc_bootmem_low_pages(fbmem_size); + fbmem_start = __pa(fbmem); + } else { + pg_data_t *pgdat; + + for_each_online_pgdat(pgdat) { + if (fbmem_start >= pgdat->bdata->node_boot_start + && fbmem_start <= pgdat->bdata->node_low_pfn) + reserve_bootmem_node(pgdat, fbmem_start, + fbmem_size); + } + } + + printk("%luKiB framebuffer memory at address 0x%08lx\n", + fbmem_size >> 10, fbmem_start); + atstk1000_fb0_data.fbmem_start = fbmem_start; + atstk1000_fb0_data.fbmem_size = fbmem_size; +} diff --git a/arch/avr32/boards/atstk1000/spi.c b/arch/avr32/boards/atstk1000/spi.c new file mode 100644 index 00000000000..567726c82c6 --- /dev/null +++ b/arch/avr32/boards/atstk1000/spi.c @@ -0,0 +1,27 @@ +/* + * ATSTK1000 SPI devices + * + * Copyright (C) 2005 Atmel Norway + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/device.h> +#include <linux/spi/spi.h> + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "ltv350qv", + .max_speed_hz = 16000000, + .bus_num = 0, + .chip_select = 1, + }, +}; + +static int board_init_spi(void) +{ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + return 0; +} +arch_initcall(board_init_spi); diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile new file mode 100644 index 00000000000..ccd74eeecec --- /dev/null +++ b/arch/avr32/boot/images/Makefile @@ -0,0 +1,62 @@ +# +# Copyright (C) 2004-2006 Atmel Corporation +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +MKIMAGE := $(srctree)/scripts/mkuboot.sh + +extra-y := vmlinux.bin vmlinux.gz + +OBJCOPYFLAGS_vmlinux.bin := -O binary +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A avr32 -O linux -T kernel \ + -C gzip -a $(CONFIG_LOAD_ADDRESS) -e $(CONFIG_ENTRY_ADDRESS) \ + -n 'Linux-$(KERNELRELEASE)' -d $< $@ + +targets += uImage uImage.srec +$(obj)/uImage: $(obj)/vmlinux.gz + $(call if_changed,uimage) + @echo ' Image $@ is ready' + +OBJCOPYFLAGS_uImage.srec := -I binary -O srec +$(obj)/uImage.srec: $(obj)/uImage + $(call if_changed,objcopy) + +OBJCOPYFLAGS_vmlinux.elf := --change-section-lma .text-0x80000000 \ + --change-section-lma __ex_table-0x80000000 \ + --change-section-lma .rodata-0x80000000 \ + --change-section-lma .data-0x80000000 \ + --change-section-lma .init-0x80000000 \ + --change-section-lma .bss-0x80000000 \ + --change-section-lma .initrd-0x80000000 \ + --change-section-lma __param-0x80000000 \ + --change-section-lma __ksymtab-0x80000000 \ + --change-section-lma __ksymtab_gpl-0x80000000 \ + --change-section-lma __kcrctab-0x80000000 \ + --change-section-lma __kcrctab_gpl-0x80000000 \ + --change-section-lma __ksymtab_strings-0x80000000 \ + --change-section-lma .got-0x80000000 \ + --set-start 0xa0000000 +$(obj)/vmlinux.elf: vmlinux FORCE + $(call if_changed,objcopy) + +quiet_cmd_sfdwarf = SFDWARF $@ + cmd_sfdwarf = sfdwarf $< TO $@ GNUAVR IW $(SFDWARF_FLAGS) > $(obj)/sfdwarf.log + +$(obj)/vmlinux.cso: $(obj)/vmlinux.elf FORCE + $(call if_changed,sfdwarf) + +install: $(BOOTIMAGE) + sh $(srctree)/install-kernel.sh $< + +# Generated files to be removed upon make clean +clean-files := vmlinux* uImage uImage.srec diff --git a/arch/avr32/boot/u-boot/Makefile b/arch/avr32/boot/u-boot/Makefile new file mode 100644 index 00000000000..125ddc96c27 --- /dev/null +++ b/arch/avr32/boot/u-boot/Makefile @@ -0,0 +1,3 @@ +extra-y := head.o + +obj-y := empty.o diff --git a/arch/avr32/boot/u-boot/empty.S b/arch/avr32/boot/u-boot/empty.S new file mode 100644 index 00000000000..8ac91a5f12f --- /dev/null +++ b/arch/avr32/boot/u-boot/empty.S @@ -0,0 +1 @@ +/* Empty file */ diff --git a/arch/avr32/boot/u-boot/head.S b/arch/avr32/boot/u-boot/head.S new file mode 100644 index 00000000000..4488fa27fe9 --- /dev/null +++ b/arch/avr32/boot/u-boot/head.S @@ -0,0 +1,60 @@ +/* + * Startup code for use with the u-boot bootloader. + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/setup.h> + + /* + * The kernel is loaded where we want it to be and all caches + * have just been flushed. We get two parameters from u-boot: + * + * r12 contains a magic number (ATAG_MAGIC) + * r11 points to a tag table providing information about + * the system. + */ + .section .init.text,"ax" + .global _start +_start: + /* Check if the boot loader actually provided a tag table */ + lddpc r0, magic_number + cp.w r12, r0 + brne no_tag_table + + /* Initialize .bss */ + lddpc r2, bss_start_addr + lddpc r3, end_addr + mov r0, 0 + mov r1, 0 +1: st.d r2++, r0 + cp r2, r3 + brlo 1b + + /* + * Save the tag table address for later use. This must be done + * _after_ .bss has been initialized... + */ + lddpc r0, tag_table_addr + st.w r0[0], r11 + + /* Jump to loader-independent setup code */ + rjmp kernel_entry + + .align 2 +magic_number: + .long ATAG_MAGIC +tag_table_addr: + .long bootloader_tags +bss_start_addr: + .long __bss_start +end_addr: + .long _end + +no_tag_table: + sub r12, pc, (. - 2f) + bral panic +2: .asciz "Boot loader didn't provide correct magic number\n" diff --git a/arch/mips/configs/ev96100_defconfig b/arch/avr32/configs/atstk1002_defconfig index 0bdc10f1161..1d22255009f 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -1,158 +1,15 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:05 2006 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_EV96100=y -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_V2PCI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# Tue Jul 11 12:41:36 2006 +# +CONFIG_AVR32=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_GT64120=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_GT96100=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -CONFIG_CPU_RM7000=y -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R5000=y -CONFIG_SYS_HAS_CPU_RM7000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -166,34 +23,34 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y -CONFIG_SYSVIPC=y +# CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_RELAY=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLAB is not set +# CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set +CONFIG_BASE_SMALL=1 +CONFIG_SLOB=y # # Loadable module support @@ -201,52 +58,81 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set # # Block layer # -# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" # -# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# System Type and features # -CONFIG_HW_HAS_PCI=y -# CONFIG_PCI is not set +CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y +CONFIG_PERFORMANCE_COUNTERS=y +CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP7000=y +CONFIG_BOARD_ATSTK1002=y +CONFIG_BOARD_ATSTK1000=y +CONFIG_LOADER_U_BOOT=y +CONFIG_LOAD_ADDRESS=0x10000000 +CONFIG_ENTRY_ADDRESS=0x90000000 +CONFIG_PHYS_OFFSET=0x10000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set +# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set +# CONFIG_NEED_NODE_MEMMAP_SIZE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_OWNERSHIP_TRACE is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_CMDLINE="" # -# PCCARD (PCMCIA/CardBus) support +# Bus options # -# CONFIG_PCCARD is not set # -# PCI Hotplug Support +# PCCARD (PCMCIA/CardBus) support # +# CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -257,18 +143,17 @@ CONFIG_NET=y # Networking options # # CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y +# CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -279,8 +164,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -288,7 +173,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -327,16 +212,11 @@ CONFIG_NETWORK_SECMARK=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -346,14 +226,15 @@ CONFIG_WIRELESS_EXT=y # Generic Driver Options # CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -373,14 +254,15 @@ CONFIG_CONNECTOR=m # Block devices # # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -390,7 +272,7 @@ CONFIG_ATA_OVER_ETH=m # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -415,34 +297,22 @@ CONFIG_RAID_ATTRS=m # Network device support # CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set +CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=m # # PHY device support # -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -CONFIG_MIPS_GT96100ETH=y -# CONFIG_DM9000 is not set +CONFIG_MII=y +CONFIG_MACB=y # # Ethernet (1000 Mbit) @@ -465,7 +335,15 @@ CONFIG_MIPS_GT96100ETH=y # Wan interfaces # # CONFIG_WAN is not set -# CONFIG_PPP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set @@ -485,65 +363,35 @@ CONFIG_MIPS_GT96100ETH=y # # Input device support # -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # IPMI @@ -579,13 +427,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=m +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -612,13 +470,28 @@ CONFIG_VIDEO_V4L2=y # Graphics support # # CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y +CONFIG_FB=m +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_SIDSA=m +CONFIG_FB_SIDSA_DEFAULT_BPP=24 +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y +CONFIG_LCD_LTV350QV=m # # Sound @@ -697,15 +570,14 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y +CONFIG_MINIX_FS=m +CONFIG_ROMFS_FS=m +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -716,8 +588,11 @@ CONFIG_FUSE_FS=m # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -726,10 +601,10 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -752,19 +627,25 @@ CONFIG_RAMFS=y # Network File Systems # CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -779,60 +660,84 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_KPROBES=y # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -841,10 +746,9 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=m -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile new file mode 100644 index 00000000000..90e5afff54a --- /dev/null +++ b/arch/avr32/kernel/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Linux/AVR32 kernel. +# + +extra-y := head.o vmlinux.lds + +obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o +obj-y += syscall_table.o syscall-stubs.o irq.o +obj-y += setup.o traps.o semaphore.o ptrace.o +obj-y += signal.o sys_avr32.o process.o time.o +obj-y += init_task.o switch_to.o cpu.o +obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o +obj-$(CONFIG_KPROBES) += kprobes.o + +USE_STANDARD_AS_RULE := true + +%.lds: %.lds.c FORCE + $(call if_changed_dep,cpp_lds_S) diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c new file mode 100644 index 00000000000..97d86586566 --- /dev/null +++ b/arch/avr32/kernel/asm-offsets.c @@ -0,0 +1,25 @@ +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed + * to extract and format the required data. + */ + +#include <linux/thread_info.h> + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +#define OFFSET(sym, str, mem) \ + DEFINE(sym, offsetof(struct str, mem)); + +void foo(void) +{ + OFFSET(TI_task, thread_info, task); + OFFSET(TI_exec_domain, thread_info, exec_domain); + OFFSET(TI_flags, thread_info, flags); + OFFSET(TI_cpu, thread_info, cpu); + OFFSET(TI_preempt_count, thread_info, preempt_count); + OFFSET(TI_restart_block, thread_info, restart_block); +} diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c new file mode 100644 index 00000000000..04f767a272b --- /dev/null +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -0,0 +1,55 @@ +/* + * Export AVR32-specific functions for loadable modules. + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> + +#include <asm/checksum.h> +#include <asm/uaccess.h> +#include <asm/delay.h> + +/* + * GCC functions + */ +extern unsigned long long __avr32_lsl64(unsigned long long u, unsigned long b); +extern unsigned long long __avr32_lsr64(unsigned long long u, unsigned long b); +extern unsigned long long __avr32_asr64(unsigned long long u, unsigned long b); +EXPORT_SYMBOL(__avr32_lsl64); +EXPORT_SYMBOL(__avr32_lsr64); +EXPORT_SYMBOL(__avr32_asr64); + +/* + * String functions + */ +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcpy); + +/* + * Userspace access stuff. + */ +EXPORT_SYMBOL(copy_from_user); +EXPORT_SYMBOL(copy_to_user); +EXPORT_SYMBOL(__copy_user); +EXPORT_SYMBOL(strncpy_from_user); +EXPORT_SYMBOL(__strncpy_from_user); +EXPORT_SYMBOL(clear_user); +EXPORT_SYMBOL(__clear_user); +EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(csum_partial_copy_generic); + +/* Delay loops (lib/delay.S) */ +EXPORT_SYMBOL(__ndelay); +EXPORT_SYMBOL(__udelay); +EXPORT_SYMBOL(__const_udelay); + +/* Bit operations (lib/findbit.S) */ +EXPORT_SYMBOL(find_first_zero_bit); +EXPORT_SYMBOL(find_next_zero_bit); +EXPORT_SYMBOL(find_first_bit); +EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(generic_find_next_zero_le_bit); diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c new file mode 100644 index 00000000000..342452ba204 --- /dev/null +++ b/arch/avr32/kernel/cpu.c @@ -0,0 +1,327 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/seq_file.h> +#include <linux/cpu.h> +#include <linux/percpu.h> +#include <linux/param.h> +#include <linux/errno.h> + +#include <asm/setup.h> +#include <asm/sysreg.h> + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +#ifdef CONFIG_PERFORMANCE_COUNTERS + +/* + * XXX: If/when a SMP-capable implementation of AVR32 will ever be + * made, we must make sure that the code executes on the correct CPU. + */ +static ssize_t show_pc0event(struct sys_device *dev, char *buf) +{ + unsigned long pccr; + + pccr = sysreg_read(PCCR); + return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f); +} +static ssize_t store_pc0event(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf || val > 0x3f) + return -EINVAL; + val = (val << 12) | (sysreg_read(PCCR) & 0xfffc0fff); + sysreg_write(PCCR, val); + return count; +} +static ssize_t show_pc0count(struct sys_device *dev, char *buf) +{ + unsigned long pcnt0; + + pcnt0 = sysreg_read(PCNT0); + return sprintf(buf, "%lu\n", pcnt0); +} +static ssize_t store_pc0count(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf) + return -EINVAL; + sysreg_write(PCNT0, val); + + return count; +} + +static ssize_t show_pc1event(struct sys_device *dev, char *buf) +{ + unsigned long pccr; + + pccr = sysreg_read(PCCR); + return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f); +} +static ssize_t store_pc1event(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf || val > 0x3f) + return -EINVAL; + val = (val << 18) | (sysreg_read(PCCR) & 0xff03ffff); + sysreg_write(PCCR, val); + return count; +} +static ssize_t show_pc1count(struct sys_device *dev, char *buf) +{ + unsigned long pcnt1; + + pcnt1 = sysreg_read(PCNT1); + return sprintf(buf, "%lu\n", pcnt1); +} +static ssize_t store_pc1count(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf) + return -EINVAL; + sysreg_write(PCNT1, val); + + return count; +} + +static ssize_t show_pccycles(struct sys_device *dev, char *buf) +{ + unsigned long pccnt; + + pccnt = sysreg_read(PCCNT); + return sprintf(buf, "%lu\n", pccnt); +} +static ssize_t store_pccycles(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf) + return -EINVAL; + sysreg_write(PCCNT, val); + + return count; +} + +static ssize_t show_pcenable(struct sys_device *dev, char *buf) +{ + unsigned long pccr; + + pccr = sysreg_read(PCCR); + return sprintf(buf, "%c\n", (pccr & 1)?'1':'0'); +} +static ssize_t store_pcenable(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned long pccr, val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf) + return -EINVAL; + if (val) + val = 1; + + pccr = sysreg_read(PCCR); + pccr = (pccr & ~1UL) | val; + sysreg_write(PCCR, pccr); + + return count; +} + +static SYSDEV_ATTR(pc0event, 0600, show_pc0event, store_pc0event); +static SYSDEV_ATTR(pc0count, 0600, show_pc0count, store_pc0count); +static SYSDEV_ATTR(pc1event, 0600, show_pc1event, store_pc1event); +static SYSDEV_ATTR(pc1count, 0600, show_pc1count, store_pc1count); +static SYSDEV_ATTR(pccycles, 0600, show_pccycles, store_pccycles); +static SYSDEV_ATTR(pcenable, 0600, show_pcenable, store_pcenable); + +#endif /* CONFIG_PERFORMANCE_COUNTERS */ + +static int __init topology_init(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + struct cpu *c = &per_cpu(cpu_devices, cpu); + + register_cpu(c, cpu); + +#ifdef CONFIG_PERFORMANCE_COUNTERS + sysdev_create_file(&c->sysdev, &attr_pc0event); + sysdev_create_file(&c->sysdev, &attr_pc0count); + sysdev_create_file(&c->sysdev, &attr_pc1event); + sysdev_create_file(&c->sysdev, &attr_pc1count); + sysdev_create_file(&c->sysdev, &attr_pccycles); + sysdev_create_file(&c->sysdev, &attr_pcenable); +#endif + } + + return 0; +} + +subsys_initcall(topology_init); + +static const char *cpu_names[] = { + "Morgan", + "AP7000", +}; +#define NR_CPU_NAMES ARRAY_SIZE(cpu_names) + +static const char *arch_names[] = { + "AVR32A", + "AVR32B", +}; +#define NR_ARCH_NAMES ARRAY_SIZE(arch_names) + +static const char *mmu_types[] = { + "No MMU", + "ITLB and DTLB", + "Shared TLB", + "MPU" +}; + +void __init setup_processor(void) +{ + unsigned long config0, config1; + unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type; + unsigned tmp; + + config0 = sysreg_read(CONFIG0); /* 0x0000013e; */ + config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */ + cpu_id = config0 >> 24; + cpu_rev = (config0 >> 16) & 0xff; + arch_id = (config0 >> 13) & 0x07; + arch_rev = (config0 >> 10) & 0x07; + mmu_type = (config0 >> 7) & 0x03; + + boot_cpu_data.arch_type = arch_id; + boot_cpu_data.cpu_type = cpu_id; + boot_cpu_data.arch_revision = arch_rev; + boot_cpu_data.cpu_revision = cpu_rev; + boot_cpu_data.tlb_config = mmu_type; + + tmp = (config1 >> 13) & 0x07; + if (tmp) { + boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07); + boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f); + boot_cpu_data.icache.linesz = 1 << (tmp + 1); + } + tmp = (config1 >> 3) & 0x07; + if (tmp) { + boot_cpu_data.dcache.ways = 1 << (config1 & 0x07); + boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f); + boot_cpu_data.dcache.linesz = 1 << (tmp + 1); + } + + if ((cpu_id >= NR_CPU_NAMES) || (arch_id >= NR_ARCH_NAMES)) { + printk ("Unknown CPU configuration (ID %02x, arch %02x), " + "continuing anyway...\n", + cpu_id, arch_id); + return; + } + + printk ("CPU: %s [%02x] revision %d (%s revision %d)\n", + cpu_names[cpu_id], cpu_id, cpu_rev, + arch_names[arch_id], arch_rev); + printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]); + printk ("CPU: features:"); + if (config0 & (1 << 6)) + printk(" fpu"); + if (config0 & (1 << 5)) + printk(" java"); + if (config0 & (1 << 4)) + printk(" perfctr"); + if (config0 & (1 << 3)) + printk(" ocd"); + printk("\n"); +} + +#ifdef CONFIG_PROC_FS +static int c_show(struct seq_file *m, void *v) +{ + unsigned int icache_size, dcache_size; + unsigned int cpu = smp_processor_id(); + + icache_size = boot_cpu_data.icache.ways * + boot_cpu_data.icache.sets * + boot_cpu_data.icache.linesz; + dcache_size = boot_cpu_data.dcache.ways * + boot_cpu_data.dcache.sets * + boot_cpu_data.dcache.linesz; + + seq_printf(m, "processor\t: %d\n", cpu); + + if (boot_cpu_data.arch_type < NR_ARCH_NAMES) + seq_printf(m, "cpu family\t: %s revision %d\n", + arch_names[boot_cpu_data.arch_type], + boot_cpu_data.arch_revision); + if (boot_cpu_data.cpu_type < NR_CPU_NAMES) + seq_printf(m, "cpu type\t: %s revision %d\n", + cpu_names[boot_cpu_data.cpu_type], + boot_cpu_data.cpu_revision); + + seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n", + icache_size >> 10, + boot_cpu_data.icache.ways, + boot_cpu_data.icache.sets, + boot_cpu_data.icache.linesz); + seq_printf(m, "d-cache\t\t: %dK (%u ways x %u sets x %u)\n", + dcache_size >> 10, + boot_cpu_data.dcache.ways, + boot_cpu_data.dcache.sets, + boot_cpu_data.dcache.linesz); + seq_printf(m, "bogomips\t: %lu.%02lu\n", + boot_cpu_data.loops_per_jiffy / (500000/HZ), + (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < 1 ? (void *)1 : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return NULL; +} + +static void c_stop(struct seq_file *m, void *v) +{ + +} + +struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = c_show +}; +#endif /* CONFIG_PROC_FS */ diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S new file mode 100644 index 00000000000..eeb66792bc3 --- /dev/null +++ b/arch/avr32/kernel/entry-avr32b.S @@ -0,0 +1,678 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This file contains the low-level entry-points into the kernel, that is, + * exception handlers, debug trap handlers, interrupt handlers and the + * system call handler. + */ +#include <linux/errno.h> + +#include <asm/asm.h> +#include <asm/hardirq.h> +#include <asm/irq.h> +#include <asm/ocd.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/ptrace.h> +#include <asm/sysreg.h> +#include <asm/thread_info.h> +#include <asm/unistd.h> + +#ifdef CONFIG_PREEMPT +# define preempt_stop mask_interrupts +#else +# define preempt_stop +# define fault_resume_kernel fault_restore_all +#endif + +#define __MASK(x) ((1 << (x)) - 1) +#define IRQ_MASK ((__MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) | \ + (__MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)) + + .section .ex.text,"ax",@progbits + .align 2 +exception_vectors: + bral handle_critical + .align 2 + bral handle_critical + .align 2 + bral do_bus_error_write + .align 2 + bral do_bus_error_read + .align 2 + bral do_nmi_ll + .align 2 + bral handle_address_fault + .align 2 + bral handle_protection_fault + .align 2 + bral handle_debug + .align 2 + bral do_illegal_opcode_ll + .align 2 + bral do_illegal_opcode_ll + .align 2 + bral do_illegal_opcode_ll + .align 2 + bral do_fpe_ll + .align 2 + bral do_illegal_opcode_ll + .align 2 + bral handle_address_fault + .align 2 + bral handle_address_fault + .align 2 + bral handle_protection_fault + .align 2 + bral handle_protection_fault + .align 2 + bral do_dtlb_modified + + /* + * r0 : PGD/PT/PTE + * r1 : Offending address + * r2 : Scratch register + * r3 : Cause (5, 12 or 13) + */ +#define tlbmiss_save pushm r0-r3 +#define tlbmiss_restore popm r0-r3 + + .section .tlbx.ex.text,"ax",@progbits + .global itlb_miss +itlb_miss: + tlbmiss_save + rjmp tlb_miss_common + + .section .tlbr.ex.text,"ax",@progbits +dtlb_miss_read: + tlbmiss_save + rjmp tlb_miss_common + + .section .tlbw.ex.text,"ax",@progbits +dtlb_miss_write: + tlbmiss_save + + .global tlb_miss_common +tlb_miss_common: + mfsr r0, SYSREG_PTBR + mfsr r1, SYSREG_TLBEAR + + /* Is it the vmalloc space? */ + bld r1, 31 + brcs handle_vmalloc_miss + + /* First level lookup */ +pgtbl_lookup: + lsr r2, r1, PGDIR_SHIFT + ld.w r0, r0[r2 << 2] + bld r0, _PAGE_BIT_PRESENT + brcc page_table_not_present + + /* TODO: Check access rights on page table if necessary */ + + /* Translate to virtual address in P1. */ + andl r0, 0xf000 + sbr r0, 31 + + /* Second level lookup */ + lsl r1, (32 - PGDIR_SHIFT) + lsr r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT + add r2, r0, r1 << 2 + ld.w r1, r2[0] + bld r1, _PAGE_BIT_PRESENT + brcc page_not_present + + /* Mark the page as accessed */ + sbr r1, _PAGE_BIT_ACCESSED + st.w r2[0], r1 + + /* Drop software flags */ + andl r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff + mtsr SYSREG_TLBELO, r1 + + /* Figure out which entry we want to replace */ + mfsr r0, SYSREG_TLBARLO + clz r2, r0 + brcc 1f + mov r1, -1 /* All entries have been accessed, */ + mtsr SYSREG_TLBARLO, r1 /* so reset TLBAR */ + mov r2, 0 /* and start at 0 */ +1: mfsr r1, SYSREG_MMUCR + lsl r2, 14 + andl r1, 0x3fff, COH + or r1, r2 + mtsr SYSREG_MMUCR, r1 + + tlbw + + tlbmiss_restore + rete + +handle_vmalloc_miss: + /* Simply do the lookup in init's page table */ + mov r0, lo(swapper_pg_dir) + orh r0, hi(swapper_pg_dir) + rjmp pgtbl_lookup + + + /* --- System Call --- */ + + .section .scall.text,"ax",@progbits +system_call: + pushm r12 /* r12_orig */ + stmts --sp, r0-lr + zero_fp + mfsr r0, SYSREG_RAR_SUP + mfsr r1, SYSREG_RSR_SUP + stm --sp, r0-r1 + + /* check for syscall tracing */ + get_thread_info r0 + ld.w r1, r0[TI_flags] + bld r1, TIF_SYSCALL_TRACE + brcs syscall_trace_enter + +syscall_trace_cont: + cp.w r8, NR_syscalls + brhs syscall_badsys + + lddpc lr, syscall_table_addr + ld.w lr, lr[r8 << 2] + mov r8, r5 /* 5th argument (6th is pushed by stub) */ + icall lr + + .global syscall_return +syscall_return: + get_thread_info r0 + mask_interrupts /* make sure we don't miss an interrupt + setting need_resched or sigpending + between sampling and the rets */ + + /* Store the return value so that the correct value is loaded below */ + stdsp sp[REG_R12], r12 + + ld.w r1, r0[TI_flags] + andl r1, _TIF_ALLWORK_MASK, COH + brne syscall_exit_work + +syscall_exit_cont: + popm r8-r9 + mtsr SYSREG_RAR_SUP, r8 + mtsr SYSREG_RSR_SUP, r9 + ldmts sp++, r0-lr + sub sp, -4 /* r12_orig */ + rets + + .align 2 +syscall_table_addr: + .long sys_call_table + +syscall_badsys: + mov r12, -ENOSYS + rjmp syscall_return + + .global ret_from_fork +ret_from_fork: + rcall schedule_tail + + /* check for syscall tracing */ + get_thread_info r0 + ld.w r1, r0[TI_flags] + andl r1, _TIF_ALLWORK_MASK, COH + brne syscall_exit_work + rjmp syscall_exit_cont + +syscall_trace_enter: + pushm r8-r12 + rcall syscall_trace + popm r8-r12 + rjmp syscall_trace_cont + +syscall_exit_work: + bld r1, TIF_SYSCALL_TRACE + brcc 1f + unmask_interrupts + rcall syscall_trace + mask_interrupts + ld.w r1, r0[TI_flags] + +1: bld r1, TIF_NEED_RESCHED + brcc 2f + unmask_interrupts + rcall schedule + mask_interrupts + ld.w r1, r0[TI_flags] + rjmp 1b + +2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK + tst r1, r2 + breq 3f + unmask_interrupts + mov r12, sp + mov r11, r0 + rcall do_notify_resume + mask_interrupts + ld.w r1, r0[TI_flags] + rjmp 1b + +3: bld r1, TIF_BREAKPOINT + brcc syscall_exit_cont + mfsr r3, SYSREG_TLBEHI + lddsp r2, sp[REG_PC] + andl r3, 0xff, COH + lsl r3, 1 + sbr r3, 30 + sbr r3, 0 + mtdr DBGREG_BWA2A, r2 + mtdr DBGREG_BWC2A, r3 + rjmp syscall_exit_cont + + + /* The slow path of the TLB miss handler */ +page_table_not_present: +page_not_present: + tlbmiss_restore + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_page_fault + rjmp ret_from_exception + + /* This function expects to find offending PC in SYSREG_RAR_EX */ +save_full_context_ex: + mfsr r8, SYSREG_RSR_EX + mov r12, r8 + andh r8, (MODE_MASK >> 16), COH + mfsr r11, SYSREG_RAR_EX + brne 2f + +1: pushm r11, r12 /* PC and SR */ + unmask_exceptions + ret r12 + +2: sub r10, sp, -(FRAME_SIZE_FULL - REG_LR) + stdsp sp[4], r10 /* replace saved SP */ + rjmp 1b + + /* Low-level exception handlers */ +handle_critical: + pushm r12 + pushm r0-r12 + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_critical_exception + + /* We should never get here... */ +bad_return: + sub r12, pc, (. - 1f) + bral panic + .align 2 +1: .asciz "Return from critical exception!" + + .align 1 +do_bus_error_write: + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mov r11, 1 + rjmp 1f + +do_bus_error_read: + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mov r11, 0 +1: mfsr r12, SYSREG_BEAR + mov r10, sp + rcall do_bus_error + rjmp ret_from_exception + + .align 1 +do_nmi_ll: + sub sp, 4 + stmts --sp, r0-lr + /* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */ + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_nmi + rjmp bad_return + +handle_address_fault: + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_address_exception + rjmp ret_from_exception + +handle_protection_fault: + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_page_fault + rjmp ret_from_exception + + .align 1 +do_illegal_opcode_ll: + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_illegal_opcode + rjmp ret_from_exception + +do_dtlb_modified: + pushm r0-r3 + mfsr r1, SYSREG_TLBEAR + mfsr r0, SYSREG_PTBR + lsr r2, r1, PGDIR_SHIFT + ld.w r0, r0[r2 << 2] + lsl r1, (32 - PGDIR_SHIFT) + lsr r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT + + /* Translate to virtual address in P1 */ + andl r0, 0xf000 + sbr r0, 31 + add r2, r0, r1 << 2 + ld.w r3, r2[0] + sbr r3, _PAGE_BIT_DIRTY + mov r0, r3 + st.w r2[0], r3 + + /* The page table is up-to-date. Update the TLB entry as well */ + andl r0, lo(_PAGE_FLAGS_HARDWARE_MASK) + mtsr SYSREG_TLBELO, r0 + + /* MMUCR[DRP] is updated automatically, so let's go... */ + tlbw + + popm r0-r3 + rete + +do_fpe_ll: + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + unmask_interrupts + mov r12, 26 + mov r11, sp + rcall do_fpe + rjmp ret_from_exception + +ret_from_exception: + mask_interrupts + lddsp r4, sp[REG_SR] + andh r4, (MODE_MASK >> 16), COH + brne fault_resume_kernel + + get_thread_info r0 + ld.w r1, r0[TI_flags] + andl r1, _TIF_WORK_MASK, COH + brne fault_exit_work + +fault_resume_user: + popm r8-r9 + mask_exceptions + mtsr SYSREG_RAR_EX, r8 + mtsr SYSREG_RSR_EX, r9 + ldmts sp++, r0-lr + sub sp, -4 + rete + +fault_resume_kernel: +#ifdef CONFIG_PREEMPT + get_thread_info r0 + ld.w r2, r0[TI_preempt_count] + cp.w r2, 0 + brne 1f + ld.w r1, r0[TI_flags] + bld r1, TIF_NEED_RESCHED + brcc 1f + lddsp r4, sp[REG_SR] + bld r4, SYSREG_GM_OFFSET + brcs 1f + rcall preempt_schedule_irq +1: +#endif + + popm r8-r9 + mask_exceptions + mfsr r1, SYSREG_SR + mtsr SYSREG_RAR_EX, r8 + mtsr SYSREG_RSR_EX, r9 + popm lr + sub sp, -4 /* ignore SP */ + popm r0-r12 + sub sp, -4 /* ignore r12_orig */ + rete + +irq_exit_work: + /* Switch to exception mode so that we can share the same code. */ + mfsr r8, SYSREG_SR + cbr r8, SYSREG_M0_OFFSET + orh r8, hi(SYSREG_BIT(M1) | SYSREG_BIT(M2)) + mtsr SYSREG_SR, r8 + sub pc, -2 + get_thread_info r0 + ld.w r1, r0[TI_flags] + +fault_exit_work: + bld r1, TIF_NEED_RESCHED + brcc 1f + unmask_interrupts + rcall schedule + mask_interrupts + ld.w r1, r0[TI_flags] + rjmp fault_exit_work + +1: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK + tst r1, r2 + breq 2f + unmask_interrupts + mov r12, sp + mov r11, r0 + rcall do_notify_resume + mask_interrupts + ld.w r1, r0[TI_flags] + rjmp fault_exit_work + +2: bld r1, TIF_BREAKPOINT + brcc fault_resume_user + mfsr r3, SYSREG_TLBEHI + lddsp r2, sp[REG_PC] + andl r3, 0xff, COH + lsl r3, 1 + sbr r3, 30 + sbr r3, 0 + mtdr DBGREG_BWA2A, r2 + mtdr DBGREG_BWC2A, r3 + rjmp fault_resume_user + + /* If we get a debug trap from privileged context we end up here */ +handle_debug_priv: + /* Fix up LR and SP in regs. r11 contains the mode we came from */ + mfsr r8, SYSREG_SR + mov r9, r8 + andh r8, hi(~MODE_MASK) + or r8, r11 + mtsr SYSREG_SR, r8 + sub pc, -2 + stdsp sp[REG_LR], lr + mtsr SYSREG_SR, r9 + sub pc, -2 + sub r10, sp, -FRAME_SIZE_FULL + stdsp sp[REG_SP], r10 + mov r12, sp + rcall do_debug_priv + + /* Now, put everything back */ + ssrf SR_EM_BIT + popm r10, r11 + mtsr SYSREG_RAR_DBG, r10 + mtsr SYSREG_RSR_DBG, r11 + mfsr r8, SYSREG_SR + mov r9, r8 + andh r8, hi(~MODE_MASK) + andh r11, hi(MODE_MASK) + or r8, r11 + mtsr SYSREG_SR, r8 + sub pc, -2 + popm lr + mtsr SYSREG_SR, r9 + sub pc, -2 + sub sp, -4 /* skip SP */ + popm r0-r12 + sub sp, -4 + retd + + /* + * At this point, everything is masked, that is, interrupts, + * exceptions and debugging traps. We might get called from + * interrupt or exception context in some rare cases, but this + * will be taken care of by do_debug(), so we're not going to + * do a 100% correct context save here. + */ +handle_debug: + sub sp, 4 /* r12_orig */ + stmts --sp, r0-lr + mfsr r10, SYSREG_RAR_DBG + mfsr r11, SYSREG_RSR_DBG + unmask_exceptions + pushm r10,r11 + andh r11, (MODE_MASK >> 16), COH + brne handle_debug_priv + + mov r12, sp + rcall do_debug + + lddsp r10, sp[REG_SR] + andh r10, (MODE_MASK >> 16), COH + breq debug_resume_user + +debug_restore_all: + popm r10,r11 + mask_exceptions + mtsr SYSREG_RSR_DBG, r11 + mtsr SYSREG_RAR_DBG, r10 + ldmts sp++, r0-lr + sub sp, -4 + retd + +debug_resume_user: + get_thread_info r0 + mask_interrupts + + ld.w r1, r0[TI_flags] + andl r1, _TIF_DBGWORK_MASK, COH + breq debug_restore_all + +1: bld r1, TIF_NEED_RESCHED + brcc 2f + unmask_interrupts + rcall schedule + mask_interrupts + ld.w r1, r0[TI_flags] + rjmp 1b + +2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK + tst r1, r2 + breq 3f + unmask_interrupts + mov r12, sp + mov r11, r0 + rcall do_notify_resume + mask_interrupts + ld.w r1, r0[TI_flags] + rjmp 1b + +3: bld r1, TIF_SINGLE_STEP + brcc debug_restore_all + mfdr r2, DBGREG_DC + sbr r2, DC_SS_BIT + mtdr DBGREG_DC, r2 + rjmp debug_restore_all + + .set rsr_int0, SYSREG_RSR_INT0 + .set rsr_int1, SYSREG_RSR_INT1 + .set rsr_int2, SYSREG_RSR_INT2 + .set rsr_int3, SYSREG_RSR_INT3 + .set rar_int0, SYSREG_RAR_INT0 + .set rar_int1, SYSREG_RAR_INT1 + .set rar_int2, SYSREG_RAR_INT2 + .set rar_int3, SYSREG_RAR_INT3 + + .macro IRQ_LEVEL level + .type irq_level\level, @function +irq_level\level: + sub sp, 4 /* r12_orig */ + stmts --sp,r0-lr + mfsr r8, rar_int\level + mfsr r9, rsr_int\level + pushm r8-r9 + + mov r11, sp + mov r12, \level + + rcall do_IRQ + + lddsp r4, sp[REG_SR] + andh r4, (MODE_MASK >> 16), COH +#ifdef CONFIG_PREEMPT + brne 2f +#else + brne 1f +#endif + + get_thread_info r0 + ld.w r1, r0[TI_flags] + andl r1, _TIF_WORK_MASK, COH + brne irq_exit_work + +1: popm r8-r9 + mtsr rar_int\level, r8 + mtsr rsr_int\level, r9 + ldmts sp++,r0-lr + sub sp, -4 /* ignore r12_orig */ + rete + +#ifdef CONFIG_PREEMPT +2: + get_thread_info r0 + ld.w r2, r0[TI_preempt_count] + cp.w r2, 0 + brne 1b + ld.w r1, r0[TI_flags] + bld r1, TIF_NEED_RESCHED + brcc 1b + lddsp r4, sp[REG_SR] + bld r4, SYSREG_GM_OFFSET + brcs 1b + rcall preempt_schedule_irq + rjmp 1b +#endif + .endm + + .section .irq.text,"ax",@progbits + + .global irq_level0 + .global irq_level1 + .global irq_level2 + .global irq_level3 + IRQ_LEVEL 0 + IRQ_LEVEL 1 + IRQ_LEVEL 2 + IRQ_LEVEL 3 diff --git a/arch/avr32/kernel/head.S b/arch/avr32/kernel/head.S new file mode 100644 index 00000000000..773b7ad87be --- /dev/null +++ b/arch/avr32/kernel/head.S @@ -0,0 +1,45 @@ +/* + * Non-board-specific low-level startup code + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> + +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/sysreg.h> + + .section .init.text,"ax" + .global kernel_entry +kernel_entry: + /* Initialize status register */ + lddpc r0, init_sr + mtsr SYSREG_SR, r0 + + /* Set initial stack pointer */ + lddpc sp, stack_addr + sub sp, -THREAD_SIZE + +#ifdef CONFIG_FRAME_POINTER + /* Mark last stack frame */ + mov lr, 0 + mov r7, 0 +#endif + + /* Set up the PIO, SDRAM controller, early printk, etc. */ + rcall board_early_init + + /* Start the show */ + lddpc pc, kernel_start_addr + + .align 2 +init_sr: + .long 0x007f0000 /* Supervisor mode, everything masked */ +stack_addr: + .long init_thread_union +kernel_start_addr: + .long start_kernel diff --git a/arch/avr32/kernel/init_task.c b/arch/avr32/kernel/init_task.c new file mode 100644 index 00000000000..effcacf9d1a --- /dev/null +++ b/arch/avr32/kernel/init_task.c @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/sched.h> +#include <linux/init_task.h> +#include <linux/mqueue.h> + +#include <asm/pgtable.h> + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +/* + * Initial thread structure. Must be aligned on an 8192-byte boundary. + */ +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c new file mode 100644 index 00000000000..856f3548e66 --- /dev/null +++ b/arch/avr32/kernel/irq.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on arch/i386/kernel/irq.c + * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains the code used by various IRQ handling routines: + * asking for different IRQ's should be done through these routines + * instead of just grabbing them. Thus setups with different IRQ numbers + * shouldn't result in any weird surprises, and installing new handlers + * should be easier. + * + * IRQ's are in fact implemented a bit like signal handlers for the kernel. + * Naturally it's not a 1:1 relation, but there are similarities. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel_stat.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/sysdev.h> + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves. + */ +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ %u\n", irq); +} + +#ifdef CONFIG_PROC_FS +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *)v, cpu; + struct irqaction *action; + unsigned long flags; + + if (i == 0) { + seq_puts(p, " "); + for_each_online_cpu(cpu) + seq_printf(p, "CPU%d ", cpu); + seq_putc(p, '\n'); + } + + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + + seq_printf(p, "%3d: ", i); + for_each_online_cpu(cpu) + seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]); + seq_printf(p, " %s", action->name); + for (action = action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); + unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + + return 0; +} +#endif diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c new file mode 100644 index 00000000000..6caf9e8d808 --- /dev/null +++ b/arch/avr32/kernel/kprobes.c @@ -0,0 +1,270 @@ +/* + * Kernel Probes (KProbes) + * + * Copyright (C) 2005-2006 Atmel Corporation + * + * Based on arch/ppc64/kernel/kprobes.c + * Copyright (C) IBM Corporation, 2002, 2004 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kprobes.h> +#include <linux/ptrace.h> + +#include <asm/cacheflush.h> +#include <asm/kdebug.h> +#include <asm/ocd.h> + +DEFINE_PER_CPU(struct kprobe *, current_kprobe); +static unsigned long kprobe_status; +static struct pt_regs jprobe_saved_regs; + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + int ret = 0; + + if ((unsigned long)p->addr & 0x01) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } + + /* XXX: Might be a good idea to check if p->addr is a valid + * kernel address as well... */ + + if (!ret) { + pr_debug("copy kprobe at %p\n", p->addr); + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; + } + + return ret; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + pr_debug("arming kprobe at %p\n", p->addr); + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + pr_debug("disarming kprobe at %p\n", p->addr); + *p->addr = p->opcode; + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); +} + +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long dc; + + pr_debug("preparing to singlestep over %p (PC=%08lx)\n", + p->addr, regs->pc); + + BUG_ON(!(sysreg_read(SR) & SYSREG_BIT(SR_D))); + + dc = __mfdr(DBGREG_DC); + dc |= DC_SS; + __mtdr(DBGREG_DC, dc); + + /* + * We must run the instruction from its original location + * since it may actually reference PC. + * + * TODO: Do the instruction replacement directly in icache. + */ + *p->addr = p->opcode; + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); +} + +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long dc; + + pr_debug("resuming execution at PC=%08lx\n", regs->pc); + + dc = __mfdr(DBGREG_DC); + dc &= ~DC_SS; + __mtdr(DBGREG_DC, dc); + + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); +} + +static void __kprobes set_current_kprobe(struct kprobe *p) +{ + __get_cpu_var(current_kprobe) = p; +} + +static int __kprobes kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + void *addr = (void *)regs->pc; + int ret = 0; + + pr_debug("kprobe_handler: kprobe_running=%d\n", + kprobe_running()); + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + + /* Check that we're not recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + if (kprobe_status == KPROBE_HIT_SS) { + printk("FIXME: kprobe hit while single-stepping!\n"); + goto no_kprobe; + } + + printk("FIXME: kprobe hit while handling another kprobe\n"); + goto no_kprobe; + } else { + p = kprobe_running(); + if (p->break_handler && p->break_handler(p, regs)) + goto ss_probe; + } + /* If it's not ours, can't be delete race, (we hold lock). */ + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) + goto no_kprobe; + + kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p); + if (p->pre_handler && p->pre_handler(p, regs)) + /* handler has already set things up, so skip ss setup */ + return 1; + +ss_probe: + prepare_singlestep(p, regs); + kprobe_status = KPROBE_HIT_SS; + return 1; + +no_kprobe: + return ret; +} + +static int __kprobes post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + + pr_debug("post_kprobe_handler, cur=%p\n", cur); + + if (!cur) + return 0; + + if (cur->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs); + reset_current_kprobe(); + preempt_enable_no_resched(); + + return 1; +} + +static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + + pr_debug("kprobe_fault_handler: trapnr=%d\n", trapnr); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + if (kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + preempt_enable_no_resched(); + } + return 0; +} + +/* + * Wrapper routine to for handling exceptions. + */ +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + pr_debug("kprobe_exceptions_notify: val=%lu, data=%p\n", + val, data); + + switch (val) { + case DIE_BREAKPOINT: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_SSTEP: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_FAULT: + if (kprobe_running() + && kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + break; + default: + break; + } + + return ret; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + + memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); + + /* + * TODO: We should probably save some of the stack here as + * well, since gcc may pass arguments on the stack for certain + * functions (lots of arguments, large aggregates, varargs) + */ + + /* setup return addr to the jprobe handler routine */ + regs->pc = (unsigned long)jp->entry; + return 1; +} + +void __kprobes jprobe_return(void) +{ + asm volatile("breakpoint" ::: "memory"); +} + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + /* + * FIXME - we should ideally be validating that we got here 'cos + * of the "trap" in jprobe_return() above, before restoring the + * saved regs... + */ + memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); + return 1; +} + +int __init arch_init_kprobes(void) +{ + printk("KPROBES: Enabling monitor mode (MM|DBE)...\n"); + __mtdr(DBGREG_DC, DC_MM | DC_DBE); + + /* TODO: Register kretprobe trampoline */ + return 0; +} diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c new file mode 100644 index 00000000000..dfc32f2817b --- /dev/null +++ b/arch/avr32/kernel/module.c @@ -0,0 +1,324 @@ +/* + * AVR32-specific kernel module loader + * + * Copyright (C) 2005-2006 Atmel Corporation + * + * GOT initialization parts are based on the s390 version + * Copyright (C) 2002, 2003 IBM Deutschland Entwicklung GmbH, + * IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/moduleloader.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + +void module_free(struct module *mod, void *module_region) +{ + vfree(mod->arch.syminfo); + mod->arch.syminfo = NULL; + + vfree(module_region); + /* FIXME: if module_region == mod->init_region, trim exception + * table entries. */ +} + +static inline int check_rela(Elf32_Rela *rela, struct module *module, + char *strings, Elf32_Sym *symbols) +{ + struct mod_arch_syminfo *info; + + info = module->arch.syminfo + ELF32_R_SYM(rela->r_info); + switch (ELF32_R_TYPE(rela->r_info)) { + case R_AVR32_GOT32: + case R_AVR32_GOT16: + case R_AVR32_GOT8: + case R_AVR32_GOT21S: + case R_AVR32_GOT18SW: /* mcall */ + case R_AVR32_GOT16S: /* ld.w */ + if (rela->r_addend != 0) { + printk(KERN_ERR + "GOT relocation against %s at offset %u with addend\n", + strings + symbols[ELF32_R_SYM(rela->r_info)].st_name, + rela->r_offset); + return -ENOEXEC; + } + if (info->got_offset == -1UL) { + info->got_offset = module->arch.got_size; + module->arch.got_size += sizeof(void *); + } + pr_debug("GOT[%3lu] %s\n", info->got_offset, + strings + symbols[ELF32_R_SYM(rela->r_info)].st_name); + break; + } + + return 0; +} + +int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, + char *secstrings, struct module *module) +{ + Elf32_Shdr *symtab; + Elf32_Sym *symbols; + Elf32_Rela *rela; + char *strings; + int nrela, i, j; + int ret; + + /* Find the symbol table */ + symtab = NULL; + for (i = 0; i < hdr->e_shnum; i++) + switch (sechdrs[i].sh_type) { + case SHT_SYMTAB: + symtab = &sechdrs[i]; + break; + } + if (!symtab) { + printk(KERN_ERR "module %s: no symbol table\n", module->name); + return -ENOEXEC; + } + + /* Allocate room for one syminfo structure per symbol. */ + module->arch.nsyms = symtab->sh_size / sizeof(Elf_Sym); + module->arch.syminfo = vmalloc(module->arch.nsyms + * sizeof(struct mod_arch_syminfo)); + if (!module->arch.syminfo) + return -ENOMEM; + + symbols = (void *)hdr + symtab->sh_offset; + strings = (void *)hdr + sechdrs[symtab->sh_link].sh_offset; + for (i = 0; i < module->arch.nsyms; i++) { + if (symbols[i].st_shndx == SHN_UNDEF && + strcmp(strings + symbols[i].st_name, + "_GLOBAL_OFFSET_TABLE_") == 0) + /* "Define" it as absolute. */ + symbols[i].st_shndx = SHN_ABS; + module->arch.syminfo[i].got_offset = -1UL; + module->arch.syminfo[i].got_initialized = 0; + } + + /* Allocate GOT entries for symbols that need it. */ + module->arch.got_size = 0; + for (i = 0; i < hdr->e_shnum; i++) { + if (sechdrs[i].sh_type != SHT_RELA) + continue; + nrela = sechdrs[i].sh_size / sizeof(Elf32_Rela); + rela = (void *)hdr + sechdrs[i].sh_offset; + for (j = 0; j < nrela; j++) { + ret = check_rela(rela + j, module, + strings, symbols); + if (ret) + goto out_free_syminfo; + } + } + + /* + * Increase core size to make room for GOT and set start + * offset for GOT. + */ + module->core_size = ALIGN(module->core_size, 4); + module->arch.got_offset = module->core_size; + module->core_size += module->arch.got_size; + + return 0; + +out_free_syminfo: + vfree(module->arch.syminfo); + module->arch.syminfo = NULL; + + return ret; +} + +static inline int reloc_overflow(struct module *module, const char *reloc_name, + Elf32_Addr relocation) +{ + printk(KERN_ERR "module %s: Value %lx does not fit relocation %s\n", + module->name, (unsigned long)relocation, reloc_name); + return -ENOEXEC; +} + +#define get_u16(loc) (*((uint16_t *)loc)) +#define put_u16(loc, val) (*((uint16_t *)loc) = (val)) + +int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relindex, + struct module *module) +{ + Elf32_Shdr *symsec = sechdrs + symindex; + Elf32_Shdr *relsec = sechdrs + relindex; + Elf32_Shdr *dstsec = sechdrs + relsec->sh_info; + Elf32_Rela *rel = (void *)relsec->sh_addr; + unsigned int i; + int ret = 0; + + for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rela); i++, rel++) { + struct mod_arch_syminfo *info; + Elf32_Sym *sym; + Elf32_Addr relocation; + uint32_t *location; + uint32_t value; + + location = (void *)dstsec->sh_addr + rel->r_offset; + sym = (Elf32_Sym *)symsec->sh_addr + ELF32_R_SYM(rel->r_info); + relocation = sym->st_value + rel->r_addend; + + info = module->arch.syminfo + ELF32_R_SYM(rel->r_info); + + /* Initialize GOT entry if necessary */ + switch (ELF32_R_TYPE(rel->r_info)) { + case R_AVR32_GOT32: + case R_AVR32_GOT16: + case R_AVR32_GOT8: + case R_AVR32_GOT21S: + case R_AVR32_GOT18SW: + case R_AVR32_GOT16S: + if (!info->got_initialized) { + Elf32_Addr *gotent; + + gotent = (module->module_core + + module->arch.got_offset + + info->got_offset); + *gotent = relocation; + info->got_initialized = 1; + } + + relocation = info->got_offset; + break; + } + + switch (ELF32_R_TYPE(rel->r_info)) { + case R_AVR32_32: + case R_AVR32_32_CPENT: + *location = relocation; + break; + case R_AVR32_22H_PCREL: + relocation -= (Elf32_Addr)location; + if ((relocation & 0xffe00001) != 0 + && (relocation & 0xffc00001) != 0xffc00000) + return reloc_overflow(module, + "R_AVR32_22H_PCREL", + relocation); + relocation >>= 1; + + value = *location; + value = ((value & 0xe1ef0000) + | (relocation & 0xffff) + | ((relocation & 0x10000) << 4) + | ((relocation & 0x1e0000) << 8)); + *location = value; + break; + case R_AVR32_11H_PCREL: + relocation -= (Elf32_Addr)location; + if ((relocation & 0xfffffc01) != 0 + && (relocation & 0xfffff801) != 0xfffff800) + return reloc_overflow(module, + "R_AVR32_11H_PCREL", + relocation); + value = get_u16(location); + value = ((value & 0xf00c) + | ((relocation & 0x1fe) << 3) + | ((relocation & 0x600) >> 9)); + put_u16(location, value); + break; + case R_AVR32_9H_PCREL: + relocation -= (Elf32_Addr)location; + if ((relocation & 0xffffff01) != 0 + && (relocation & 0xfffffe01) != 0xfffffe00) + return reloc_overflow(module, + "R_AVR32_9H_PCREL", + relocation); + value = get_u16(location); + value = ((value & 0xf00f) + | ((relocation & 0x1fe) << 3)); + put_u16(location, value); + break; + case R_AVR32_9UW_PCREL: + relocation -= ((Elf32_Addr)location) & 0xfffffffc; + if ((relocation & 0xfffffc03) != 0) + return reloc_overflow(module, + "R_AVR32_9UW_PCREL", + relocation); + value = get_u16(location); + value = ((value & 0xf80f) + | ((relocation & 0x1fc) << 2)); + put_u16(location, value); + break; + case R_AVR32_GOTPC: + /* + * R6 = PC - (PC - GOT) + * + * At this point, relocation contains the + * value of PC. Just subtract the value of + * GOT, and we're done. + */ + pr_debug("GOTPC: PC=0x%lx, got_offset=0x%lx, core=0x%p\n", + relocation, module->arch.got_offset, + module->module_core); + relocation -= ((unsigned long)module->module_core + + module->arch.got_offset); + *location = relocation; + break; + case R_AVR32_GOT18SW: + if ((relocation & 0xfffe0003) != 0 + && (relocation & 0xfffc0003) != 0xffff0000) + return reloc_overflow(module, "R_AVR32_GOT18SW", + relocation); + relocation >>= 2; + /* fall through */ + case R_AVR32_GOT16S: + if ((relocation & 0xffff8000) != 0 + && (relocation & 0xffff0000) != 0xffff0000) + return reloc_overflow(module, "R_AVR32_GOT16S", + relocation); + pr_debug("GOT reloc @ 0x%lx -> %lu\n", + rel->r_offset, relocation); + value = *location; + value = ((value & 0xffff0000) + | (relocation & 0xffff)); + *location = value; + break; + + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + module->name, ELF32_R_TYPE(rel->r_info)); + return -ENOEXEC; + } + } + + return ret; +} + +int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relindex, + struct module *module) +{ + printk(KERN_ERR "module %s: REL relocations are not supported\n", + module->name); + return -ENOEXEC; +} + +int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, + struct module *module) +{ + vfree(module->arch.syminfo); + module->arch.syminfo = NULL; + + return 0; +} + +void module_arch_cleanup(struct module *module) +{ + +} diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c new file mode 100644 index 00000000000..317dc50945f --- /dev/null +++ b/arch/avr32/kernel/process.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/fs.h> +#include <linux/ptrace.h> +#include <linux/reboot.h> +#include <linux/unistd.h> + +#include <asm/sysreg.h> +#include <asm/ocd.h> + +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +void cpu_idle(void) +{ + /* endless idle loop with no priority at all */ + while (1) { + /* TODO: Enter sleep mode */ + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +void machine_halt(void) +{ +} + +void machine_power_off(void) +{ +} + +void machine_restart(char *cmd) +{ + __mtdr(DBGREG_DC, DC_DBE); + __mtdr(DBGREG_DC, DC_RES); + while (1) ; +} + +/* + * PC is actually discarded when returning from a system call -- the + * return address must be stored in LR. This function will make sure + * LR points to do_exit before starting the thread. + * + * Also, when returning from fork(), r12 is 0, so we must copy the + * argument as well. + * + * r0 : The argument to the main thread function + * r1 : The address of do_exit + * r2 : The address of the main thread function + */ +asmlinkage extern void kernel_thread_helper(void); +__asm__(" .type kernel_thread_helper, @function\n" + "kernel_thread_helper:\n" + " mov r12, r0\n" + " mov lr, r2\n" + " mov pc, r1\n" + " .size kernel_thread_helper, . - kernel_thread_helper"); + +int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + + regs.r0 = (unsigned long)arg; + regs.r1 = (unsigned long)fn; + regs.r2 = (unsigned long)do_exit; + regs.lr = (unsigned long)kernel_thread_helper; + regs.pc = (unsigned long)kernel_thread_helper; + regs.sr = MODE_SUPERVISOR; + + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, + 0, ®s, 0, NULL, NULL); +} +EXPORT_SYMBOL(kernel_thread); + +/* + * Free current thread data structures etc + */ +void exit_thread(void) +{ + /* nothing to do */ +} + +void flush_thread(void) +{ + /* nothing to do */ +} + +void release_thread(struct task_struct *dead_task) +{ + /* do nothing */ +} + +static const char *cpu_modes[] = { + "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1", + "Interrupt level 2", "Interrupt level 3", "Exception", "NMI" +}; + +void show_regs(struct pt_regs *regs) +{ + unsigned long sp = regs->sp; + unsigned long lr = regs->lr; + unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT; + + if (!user_mode(regs)) + sp = (unsigned long)regs + FRAME_SIZE_FULL; + + print_symbol("PC is at %s\n", instruction_pointer(regs)); + print_symbol("LR is at %s\n", lr); + printk("pc : [<%08lx>] lr : [<%08lx>] %s\n" + "sp : %08lx r12: %08lx r11: %08lx\n", + instruction_pointer(regs), + lr, print_tainted(), sp, regs->r12, regs->r11); + printk("r10: %08lx r9 : %08lx r8 : %08lx\n", + regs->r10, regs->r9, regs->r8); + printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", + regs->r7, regs->r6, regs->r5, regs->r4); + printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", + regs->r3, regs->r2, regs->r1, regs->r0); + printk("Flags: %c%c%c%c%c\n", + regs->sr & SR_Q ? 'Q' : 'q', + regs->sr & SR_V ? 'V' : 'v', + regs->sr & SR_N ? 'N' : 'n', + regs->sr & SR_Z ? 'Z' : 'z', + regs->sr & SR_C ? 'C' : 'c'); + printk("Mode bits: %c%c%c%c%c%c%c%c%c\n", + regs->sr & SR_H ? 'H' : 'h', + regs->sr & SR_R ? 'R' : 'r', + regs->sr & SR_J ? 'J' : 'j', + regs->sr & SR_EM ? 'E' : 'e', + regs->sr & SR_I3M ? '3' : '.', + regs->sr & SR_I2M ? '2' : '.', + regs->sr & SR_I1M ? '1' : '.', + regs->sr & SR_I0M ? '0' : '.', + regs->sr & SR_GM ? 'G' : 'g'); + printk("CPU Mode: %s\n", cpu_modes[mode]); + + show_trace(NULL, (unsigned long *)sp, regs); +} +EXPORT_SYMBOL(show_regs); + +/* Fill in the fpu structure for a core dump. This is easy -- we don't have any */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) +{ + /* Not valid */ + return 0; +} + +asmlinkage void ret_from_fork(void); + +int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs; + + childregs = ((struct pt_regs *)(THREAD_SIZE + (unsigned long)p->thread_info)) - 1; + *childregs = *regs; + + if (user_mode(regs)) + childregs->sp = usp; + else + childregs->sp = (unsigned long)p->thread_info + THREAD_SIZE; + + childregs->r12 = 0; /* Set return value for child */ + + p->thread.cpu_context.sr = MODE_SUPERVISOR | SR_GM; + p->thread.cpu_context.ksp = (unsigned long)childregs; + p->thread.cpu_context.pc = (unsigned long)ret_from_fork; + + return 0; +} + +/* r12-r8 are dummy parameters to force the compiler to use the stack */ +asmlinkage int sys_fork(struct pt_regs *regs) +{ + return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL); +} + +asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, + unsigned long parent_tidptr, + unsigned long child_tidptr, struct pt_regs *regs) +{ + if (!newsp) + newsp = regs->sp; + return do_fork(clone_flags, newsp, regs, 0, + (int __user *)parent_tidptr, + (int __user *)child_tidptr); +} + +asmlinkage int sys_vfork(struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, + 0, NULL, NULL); +} + +asmlinkage int sys_execve(char __user *ufilename, char __user *__user *uargv, + char __user *__user *uenvp, struct pt_regs *regs) +{ + int error; + char *filename; + + filename = getname(ufilename); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + + error = do_execve(filename, uargv, uenvp, regs); + if (error == 0) + current->ptrace &= ~PT_DTRACE; + putname(filename); + +out: + return error; +} + + +/* + * This function is supposed to answer the question "who called + * schedule()?" + */ +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long pc; + unsigned long stack_page; + + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + stack_page = (unsigned long)p->thread_info; + BUG_ON(!stack_page); + + /* + * The stored value of PC is either the address right after + * the call to __switch_to() or ret_from_fork. + */ + pc = thread_saved_pc(p); + if (in_sched_functions(pc)) { +#ifdef CONFIG_FRAME_POINTER + unsigned long fp = p->thread.cpu_context.r7; + BUG_ON(fp < stack_page || fp > (THREAD_SIZE + stack_page)); + pc = *(unsigned long *)fp; +#else + /* + * We depend on the frame size of schedule here, which + * is actually quite ugly. It might be possible to + * determine the frame size automatically at build + * time by doing this: + * - compile sched.c + * - disassemble the resulting sched.o + * - look for 'sub sp,??' shortly after '<schedule>:' + */ + unsigned long sp = p->thread.cpu_context.ksp + 16; + BUG_ON(sp < stack_page || sp > (THREAD_SIZE + stack_page)); + pc = *(unsigned long *)sp; +#endif + } + + return pc; +} diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c new file mode 100644 index 00000000000..3c89e59029a --- /dev/null +++ b/arch/avr32/kernel/ptrace.c @@ -0,0 +1,371 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp_lock.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/user.h> +#include <linux/security.h> +#include <linux/unistd.h> +#include <linux/notifier.h> + +#include <asm/traps.h> +#include <asm/uaccess.h> +#include <asm/ocd.h> +#include <asm/mmu_context.h> +#include <asm/kdebug.h> + +static struct pt_regs *get_user_regs(struct task_struct *tsk) +{ + return (struct pt_regs *)((unsigned long) tsk->thread_info + + THREAD_SIZE - sizeof(struct pt_regs)); +} + +static void ptrace_single_step(struct task_struct *tsk) +{ + pr_debug("ptrace_single_step: pid=%u, SR=0x%08lx\n", + tsk->pid, tsk->thread.cpu_context.sr); + if (!(tsk->thread.cpu_context.sr & SR_D)) { + /* + * Set a breakpoint at the current pc to force the + * process into debug mode. The syscall/exception + * exit code will set a breakpoint at the return + * address when this flag is set. + */ + pr_debug("ptrace_single_step: Setting TIF_BREAKPOINT\n"); + set_tsk_thread_flag(tsk, TIF_BREAKPOINT); + } + + /* The monitor code will do the actual step for us */ + set_tsk_thread_flag(tsk, TIF_SINGLE_STEP); +} + +/* + * Called by kernel/ptrace.c when detaching + * + * Make sure any single step bits, etc. are not set + */ +void ptrace_disable(struct task_struct *child) +{ + clear_tsk_thread_flag(child, TIF_SINGLE_STEP); +} + +/* + * Handle hitting a breakpoint + */ +static void ptrace_break(struct task_struct *tsk, struct pt_regs *regs) +{ + siginfo_t info; + + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_BRKPT; + info.si_addr = (void __user *)instruction_pointer(regs); + + pr_debug("ptrace_break: Sending SIGTRAP to PID %u (pc = 0x%p)\n", + tsk->pid, info.si_addr); + force_sig_info(SIGTRAP, &info, tsk); +} + +/* + * Read the word at offset "offset" into the task's "struct user". We + * actually access the pt_regs struct stored on the kernel stack. + */ +static int ptrace_read_user(struct task_struct *tsk, unsigned long offset, + unsigned long __user *data) +{ + unsigned long *regs; + unsigned long value; + + pr_debug("ptrace_read_user(%p, %#lx, %p)\n", + tsk, offset, data); + + if (offset & 3 || offset >= sizeof(struct user)) { + printk("ptrace_read_user: invalid offset 0x%08lx\n", offset); + return -EIO; + } + + regs = (unsigned long *)get_user_regs(tsk); + + value = 0; + if (offset < sizeof(struct pt_regs)) + value = regs[offset / sizeof(regs[0])]; + + return put_user(value, data); +} + +/* + * Write the word "value" to offset "offset" into the task's "struct + * user". We actually access the pt_regs struct stored on the kernel + * stack. + */ +static int ptrace_write_user(struct task_struct *tsk, unsigned long offset, + unsigned long value) +{ + unsigned long *regs; + + if (offset & 3 || offset >= sizeof(struct user)) { + printk("ptrace_write_user: invalid offset 0x%08lx\n", offset); + return -EIO; + } + + if (offset >= sizeof(struct pt_regs)) + return 0; + + regs = (unsigned long *)get_user_regs(tsk); + regs[offset / sizeof(regs[0])] = value; + + return 0; +} + +static int ptrace_getregs(struct task_struct *tsk, void __user *uregs) +{ + struct pt_regs *regs = get_user_regs(tsk); + + return copy_to_user(uregs, regs, sizeof(*regs)) ? -EFAULT : 0; +} + +static int ptrace_setregs(struct task_struct *tsk, const void __user *uregs) +{ + struct pt_regs newregs; + int ret; + + ret = -EFAULT; + if (copy_from_user(&newregs, uregs, sizeof(newregs)) == 0) { + struct pt_regs *regs = get_user_regs(tsk); + + ret = -EINVAL; + if (valid_user_regs(&newregs)) { + *regs = newregs; + ret = 0; + } + } + + return ret; +} + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + unsigned long tmp; + int ret; + + pr_debug("arch_ptrace(%ld, %ld, %#lx, %#lx)\n", + request, child->pid, addr, data); + + pr_debug("ptrace: Enabling monitor mode...\n"); + __mtdr(DBGREG_DC, __mfdr(DBGREG_DC) | DC_MM | DC_DBE); + + switch (request) { + /* Read the word at location addr in the child process */ + case PTRACE_PEEKTEXT: + case PTRACE_PEEKDATA: + ret = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + if (ret == sizeof(tmp)) + ret = put_user(tmp, (unsigned long __user *)data); + else + ret = -EIO; + break; + + case PTRACE_PEEKUSR: + ret = ptrace_read_user(child, addr, + (unsigned long __user *)data); + break; + + /* Write the word in data at location addr */ + case PTRACE_POKETEXT: + case PTRACE_POKEDATA: + ret = access_process_vm(child, addr, &data, sizeof(data), 1); + if (ret == sizeof(data)) + ret = 0; + else + ret = -EIO; + break; + + case PTRACE_POKEUSR: + ret = ptrace_write_user(child, addr, data); + break; + + /* continue and stop at next (return from) syscall */ + case PTRACE_SYSCALL: + /* restart after signal */ + case PTRACE_CONT: + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + /* XXX: Are we sure no breakpoints are active here? */ + wake_up_process(child); + ret = 0; + break; + + /* + * Make the child exit. Best I can do is send it a + * SIGKILL. Perhaps it should be put in the status that it + * wants to exit. + */ + case PTRACE_KILL: + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) + break; + child->exit_code = SIGKILL; + wake_up_process(child); + break; + + /* + * execute single instruction. + */ + case PTRACE_SINGLESTEP: + ret = -EIO; + if (!valid_signal(data)) + break; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + ptrace_single_step(child); + child->exit_code = data; + wake_up_process(child); + ret = 0; + break; + + /* Detach a process that was attached */ + case PTRACE_DETACH: + ret = ptrace_detach(child, data); + break; + + case PTRACE_GETREGS: + ret = ptrace_getregs(child, (void __user *)data); + break; + + case PTRACE_SETREGS: + ret = ptrace_setregs(child, (const void __user *)data); + break; + + default: + ret = ptrace_request(child, request, addr, data); + break; + } + + pr_debug("sys_ptrace returning %d (DC = 0x%08lx)\n", ret, __mfdr(DBGREG_DC)); + return ret; +} + +asmlinkage void syscall_trace(void) +{ + pr_debug("syscall_trace called\n"); + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(current->ptrace & PT_PTRACED)) + return; + + pr_debug("syscall_trace: notifying parent\n"); + /* The 0x80 provides a way for the tracing parent to + * distinguish between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it + * will do for normal use. strace only continues with a + * signal if the stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + pr_debug("syscall_trace: sending signal %d to PID %u\n", + current->exit_code, current->pid); + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} + +asmlinkage void do_debug_priv(struct pt_regs *regs) +{ + unsigned long dc, ds; + unsigned long die_val; + + ds = __mfdr(DBGREG_DS); + + pr_debug("do_debug_priv: pc = %08lx, ds = %08lx\n", regs->pc, ds); + + if (ds & DS_SSS) + die_val = DIE_SSTEP; + else + die_val = DIE_BREAKPOINT; + + if (notify_die(die_val, regs, 0, SIGTRAP) == NOTIFY_STOP) + return; + + if (likely(ds & DS_SSS)) { + extern void itlb_miss(void); + extern void tlb_miss_common(void); + struct thread_info *ti; + + dc = __mfdr(DBGREG_DC); + dc &= ~DC_SS; + __mtdr(DBGREG_DC, dc); + + ti = current_thread_info(); + ti->flags |= _TIF_BREAKPOINT; + + /* The TLB miss handlers don't check thread flags */ + if ((regs->pc >= (unsigned long)&itlb_miss) + && (regs->pc <= (unsigned long)&tlb_miss_common)) { + __mtdr(DBGREG_BWA2A, sysreg_read(RAR_EX)); + __mtdr(DBGREG_BWC2A, 0x40000001 | (get_asid() << 1)); + } + + /* + * If we're running in supervisor mode, the breakpoint + * will take us where we want directly, no need to + * single step. + */ + if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR) + ti->flags |= TIF_SINGLE_STEP; + } else { + panic("Unable to handle debug trap at pc = %08lx\n", + regs->pc); + } +} + +/* + * Handle breakpoints, single steps and other debuggy things. To keep + * things simple initially, we run with interrupts and exceptions + * disabled all the time. + */ +asmlinkage void do_debug(struct pt_regs *regs) +{ + unsigned long dc, ds; + + ds = __mfdr(DBGREG_DS); + pr_debug("do_debug: pc = %08lx, ds = %08lx\n", regs->pc, ds); + + if (test_thread_flag(TIF_BREAKPOINT)) { + pr_debug("TIF_BREAKPOINT set\n"); + /* We're taking care of it */ + clear_thread_flag(TIF_BREAKPOINT); + __mtdr(DBGREG_BWC2A, 0); + } + + if (test_thread_flag(TIF_SINGLE_STEP)) { + pr_debug("TIF_SINGLE_STEP set, ds = 0x%08lx\n", ds); + if (ds & DS_SSS) { + dc = __mfdr(DBGREG_DC); + dc &= ~DC_SS; + __mtdr(DBGREG_DC, dc); + + clear_thread_flag(TIF_SINGLE_STEP); + ptrace_break(current, regs); + } + } else { + /* regular breakpoint */ + ptrace_break(current, regs); + } +} diff --git a/arch/avr32/kernel/semaphore.c b/arch/avr32/kernel/semaphore.c new file mode 100644 index 00000000000..1e2705a0501 --- /dev/null +++ b/arch/avr32/kernel/semaphore.c @@ -0,0 +1,148 @@ +/* + * AVR32 sempahore implementation. + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on linux/arch/i386/kernel/semaphore.c + * Copyright (C) 1999 Linus Torvalds + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/module.h> + +#include <asm/semaphore.h> +#include <asm/atomic.h> + +/* + * Semaphores are implemented using a two-way counter: + * The "count" variable is decremented for each process + * that tries to acquire the semaphore, while the "sleeping" + * variable is a count of such acquires. + * + * Notably, the inline "up()" and "down()" functions can + * efficiently test if they need to do any extra work (up + * needs to do something only if count was negative before + * the increment operation. + * + * "sleeping" and the contention routine ordering is protected + * by the spinlock in the semaphore's waitqueue head. + * + * Note that these functions are only called when there is + * contention on the lock, and as such all this is the + * "non-critical" part of the whole semaphore business. The + * critical part is the inline stuff in <asm/semaphore.h> + * where we want to avoid any extra jumps and calls. + */ + +/* + * Logic: + * - only on a boundary condition do we need to care. When we go + * from a negative count to a non-negative, we wake people up. + * - when we go from a non-negative count to a negative do we + * (a) synchronize with the "sleeper" count and (b) make sure + * that we're on the wakeup list before we synchronize so that + * we cannot lose wakeup events. + */ + +void __up(struct semaphore *sem) +{ + wake_up(&sem->wait); +} +EXPORT_SYMBOL(__up); + +void __sched __down(struct semaphore *sem) +{ + struct task_struct *tsk = current; + DECLARE_WAITQUEUE(wait, tsk); + unsigned long flags; + + tsk->state = TASK_UNINTERRUPTIBLE; + spin_lock_irqsave(&sem->wait.lock, flags); + add_wait_queue_exclusive_locked(&sem->wait, &wait); + + sem->sleepers++; + for (;;) { + int sleepers = sem->sleepers; + + /* + * Add "everybody else" into it. They aren't + * playing, because we own the spinlock in + * the wait_queue_head. + */ + if (atomic_add_return(sleepers - 1, &sem->count) >= 0) { + sem->sleepers = 0; + break; + } + sem->sleepers = 1; /* us - see -1 above */ + spin_unlock_irqrestore(&sem->wait.lock, flags); + + schedule(); + + spin_lock_irqsave(&sem->wait.lock, flags); + tsk->state = TASK_UNINTERRUPTIBLE; + } + remove_wait_queue_locked(&sem->wait, &wait); + wake_up_locked(&sem->wait); + spin_unlock_irqrestore(&sem->wait.lock, flags); + tsk->state = TASK_RUNNING; +} +EXPORT_SYMBOL(__down); + +int __sched __down_interruptible(struct semaphore *sem) +{ + int retval = 0; + struct task_struct *tsk = current; + DECLARE_WAITQUEUE(wait, tsk); + unsigned long flags; + + tsk->state = TASK_INTERRUPTIBLE; + spin_lock_irqsave(&sem->wait.lock, flags); + add_wait_queue_exclusive_locked(&sem->wait, &wait); + + sem->sleepers++; + for (;;) { + int sleepers = sem->sleepers; + + /* + * With signals pending, this turns into the trylock + * failure case - we won't be sleeping, and we can't + * get the lock as it has contention. Just correct the + * count and exit. + */ + if (signal_pending(current)) { + retval = -EINTR; + sem->sleepers = 0; + atomic_add(sleepers, &sem->count); + break; + } + + /* + * Add "everybody else" into it. They aren't + * playing, because we own the spinlock in + * the wait_queue_head. + */ + if (atomic_add_return(sleepers - 1, &sem->count) >= 0) { + sem->sleepers = 0; + break; + } + sem->sleepers = 1; /* us - see -1 above */ + spin_unlock_irqrestore(&sem->wait.lock, flags); + + schedule(); + + spin_lock_irqsave(&sem->wait.lock, flags); + tsk->state = TASK_INTERRUPTIBLE; + } + remove_wait_queue_locked(&sem->wait, &wait); + wake_up_locked(&sem->wait); + spin_unlock_irqrestore(&sem->wait.lock, flags); + + tsk->state = TASK_RUNNING; + return retval; +} +EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c new file mode 100644 index 00000000000..5d68f3c6990 --- /dev/null +++ b/arch/avr32/kernel/setup.c @@ -0,0 +1,335 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/console.h> +#include <linux/ioport.h> +#include <linux/bootmem.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/root_dev.h> +#include <linux/cpu.h> + +#include <asm/sections.h> +#include <asm/processor.h> +#include <asm/pgtable.h> +#include <asm/setup.h> +#include <asm/sysreg.h> + +#include <asm/arch/board.h> +#include <asm/arch/init.h> + +extern int root_mountflags; + +/* + * Bootloader-provided information about physical memory + */ +struct tag_mem_range *mem_phys; +struct tag_mem_range *mem_reserved; +struct tag_mem_range *mem_ramdisk; + +/* + * Initialize loops_per_jiffy as 5000000 (500MIPS). + * Better make it too large than too small... + */ +struct avr32_cpuinfo boot_cpu_data = { + .loops_per_jiffy = 5000000 +}; +EXPORT_SYMBOL(boot_cpu_data); + +static char command_line[COMMAND_LINE_SIZE]; + +/* + * Should be more than enough, but if you have a _really_ complex + * setup, you might need to increase the size of this... + */ +static struct tag_mem_range __initdata mem_range_cache[32]; +static unsigned mem_range_next_free; + +/* + * Standard memory resources + */ +static struct resource mem_res[] = { + { + .name = "Kernel code", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM + }, + { + .name = "Kernel data", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM, + }, +}; + +#define kernel_code mem_res[0] +#define kernel_data mem_res[1] + +/* + * Early framebuffer allocation. Works as follows: + * - If fbmem_size is zero, nothing will be allocated or reserved. + * - If fbmem_start is zero when setup_bootmem() is called, + * fbmem_size bytes will be allocated from the bootmem allocator. + * - If fbmem_start is nonzero, an area of size fbmem_size will be + * reserved at the physical address fbmem_start if necessary. If + * the area isn't in a memory region known to the kernel, it will + * be left alone. + * + * Board-specific code may use these variables to set up platform data + * for the framebuffer driver if fbmem_size is nonzero. + */ +static unsigned long __initdata fbmem_start; +static unsigned long __initdata fbmem_size; + +/* + * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for + * use as framebuffer. + * + * "fbmem=xxx[kKmM]@yyy[kKmM]" defines a memory region of size xxx and + * starting at yyy to be reserved for use as framebuffer. + * + * The kernel won't verify that the memory region starting at yyy + * actually contains usable RAM. + */ +static int __init early_parse_fbmem(char *p) +{ + fbmem_size = memparse(p, &p); + if (*p == '@') + fbmem_start = memparse(p, &p); + return 0; +} +early_param("fbmem", early_parse_fbmem); + +static inline void __init resource_init(void) +{ + struct tag_mem_range *region; + + kernel_code.start = __pa(init_mm.start_code); + kernel_code.end = __pa(init_mm.end_code - 1); + kernel_data.start = __pa(init_mm.end_code); + kernel_data.end = __pa(init_mm.brk - 1); + + for (region = mem_phys; region; region = region->next) { + struct resource *res; + unsigned long phys_start, phys_end; + + if (region->size == 0) + continue; + + phys_start = region->addr; + phys_end = phys_start + region->size - 1; + + res = alloc_bootmem_low(sizeof(*res)); + res->name = "System RAM"; + res->start = phys_start; + res->end = phys_end; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + + request_resource (&iomem_resource, res); + + if (kernel_code.start >= res->start && + kernel_code.end <= res->end) + request_resource (res, &kernel_code); + if (kernel_data.start >= res->start && + kernel_data.end <= res->end) + request_resource (res, &kernel_data); + } +} + +static int __init parse_tag_core(struct tag *tag) +{ + if (tag->hdr.size > 2) { + if ((tag->u.core.flags & 1) == 0) + root_mountflags &= ~MS_RDONLY; + ROOT_DEV = new_decode_dev(tag->u.core.rootdev); + } + return 0; +} +__tagtable(ATAG_CORE, parse_tag_core); + +static int __init parse_tag_mem_range(struct tag *tag, + struct tag_mem_range **root) +{ + struct tag_mem_range *cur, **pprev; + struct tag_mem_range *new; + + /* + * Ignore zero-sized entries. If we're running standalone, the + * SDRAM code may emit such entries if something goes + * wrong... + */ + if (tag->u.mem_range.size == 0) + return 0; + + /* + * Copy the data so the bootmem init code doesn't need to care + * about it. + */ + if (mem_range_next_free >= + (sizeof(mem_range_cache) / sizeof(mem_range_cache[0]))) + panic("Physical memory map too complex!\n"); + + new = &mem_range_cache[mem_range_next_free++]; + *new = tag->u.mem_range; + + pprev = root; + cur = *root; + while (cur) { + pprev = &cur->next; + cur = cur->next; + } + + *pprev = new; + new->next = NULL; + + return 0; +} + +static int __init parse_tag_mem(struct tag *tag) +{ + return parse_tag_mem_range(tag, &mem_phys); +} +__tagtable(ATAG_MEM, parse_tag_mem); + +static int __init parse_tag_cmdline(struct tag *tag) +{ + strlcpy(saved_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); + return 0; +} +__tagtable(ATAG_CMDLINE, parse_tag_cmdline); + +static int __init parse_tag_rdimg(struct tag *tag) +{ + return parse_tag_mem_range(tag, &mem_ramdisk); +} +__tagtable(ATAG_RDIMG, parse_tag_rdimg); + +static int __init parse_tag_clock(struct tag *tag) +{ + /* + * We'll figure out the clocks by peeking at the system + * manager regs directly. + */ + return 0; +} +__tagtable(ATAG_CLOCK, parse_tag_clock); + +static int __init parse_tag_rsvd_mem(struct tag *tag) +{ + return parse_tag_mem_range(tag, &mem_reserved); +} +__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem); + +static int __init parse_tag_ethernet(struct tag *tag) +{ +#if 0 + const struct platform_device *pdev; + + /* + * We really need a bus type that supports "classes"...this + * will do for now (until we must handle other kinds of + * ethernet controllers) + */ + pdev = platform_get_device("macb", tag->u.ethernet.mac_index); + if (pdev && pdev->dev.platform_data) { + struct eth_platform_data *data = pdev->dev.platform_data; + + data->valid = 1; + data->mii_phy_addr = tag->u.ethernet.mii_phy_addr; + memcpy(data->hw_addr, tag->u.ethernet.hw_address, + sizeof(data->hw_addr)); + } +#endif + return 0; +} +__tagtable(ATAG_ETHERNET, parse_tag_ethernet); + +/* + * Scan the tag table for this tag, and call its parse function. The + * tag table is built by the linker from all the __tagtable + * declarations. + */ +static int __init parse_tag(struct tag *tag) +{ + extern struct tagtable __tagtable_begin, __tagtable_end; + struct tagtable *t; + + for (t = &__tagtable_begin; t < &__tagtable_end; t++) + if (tag->hdr.tag == t->tag) { + t->parse(tag); + break; + } + + return t < &__tagtable_end; +} + +/* + * Parse all tags in the list we got from the boot loader + */ +static void __init parse_tags(struct tag *t) +{ + for (; t->hdr.tag != ATAG_NONE; t = tag_next(t)) + if (!parse_tag(t)) + printk(KERN_WARNING + "Ignoring unrecognised tag 0x%08x\n", + t->hdr.tag); +} + +void __init setup_arch (char **cmdline_p) +{ + struct clk *cpu_clk; + + parse_tags(bootloader_tags); + + setup_processor(); + setup_platform(); + + cpu_clk = clk_get(NULL, "cpu"); + if (IS_ERR(cpu_clk)) { + printk(KERN_WARNING "Warning: Unable to get CPU clock\n"); + } else { + unsigned long cpu_hz = clk_get_rate(cpu_clk); + + /* + * Well, duh, but it's probably a good idea to + * increment the use count. + */ + clk_enable(cpu_clk); + + boot_cpu_data.clk = cpu_clk; + boot_cpu_data.loops_per_jiffy = cpu_hz * 4; + printk("CPU: Running at %lu.%03lu MHz\n", + ((cpu_hz + 500) / 1000) / 1000, + ((cpu_hz + 500) / 1000) % 1000); + } + + init_mm.start_code = (unsigned long) &_text; + init_mm.end_code = (unsigned long) &_etext; + init_mm.end_data = (unsigned long) &_edata; + init_mm.brk = (unsigned long) &_end; + + strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + parse_early_param(); + + setup_bootmem(); + + board_setup_fbmem(fbmem_start, fbmem_size); + +#ifdef CONFIG_VT + conswitchp = &dummy_con; +#endif + + paging_init(); + + resource_init(); +} diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c new file mode 100644 index 00000000000..33096651c24 --- /dev/null +++ b/arch/avr32/kernel/signal.c @@ -0,0 +1,328 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on linux/arch/sh/kernel/signal.c + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 1991, 1992 Linus Torvalds + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/suspend.h> + +#include <asm/uaccess.h> +#include <asm/ucontext.h> + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + struct pt_regs *regs) +{ + return do_sigaltstack(uss, uoss, regs->sp); +} + +struct rt_sigframe +{ + struct siginfo info; + struct ucontext uc; + unsigned long retcode; +}; + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + +#define COPY(x) err |= __get_user(regs->x, &sc->x) + COPY(sr); + COPY(pc); + COPY(lr); + COPY(sp); + COPY(r12); + COPY(r11); + COPY(r10); + COPY(r9); + COPY(r8); + COPY(r7); + COPY(r6); + COPY(r5); + COPY(r4); + COPY(r3); + COPY(r2); + COPY(r1); + COPY(r0); +#undef COPY + + /* + * Don't allow anyone to pretend they're running in supervisor + * mode or something... + */ + err |= !valid_user_regs(regs); + + return err; +} + + +asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + sigset_t set; + + frame = (struct rt_sigframe __user *)regs->sp; + pr_debug("SIG return: frame = %p\n", frame); + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + + pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n", + regs->pc, regs->lr, regs->sp); + + return regs->r12; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +static int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) +{ + int err = 0; + +#define COPY(x) err |= __put_user(regs->x, &sc->x) + COPY(sr); + COPY(pc); + COPY(lr); + COPY(sp); + COPY(r12); + COPY(r11); + COPY(r10); + COPY(r9); + COPY(r8); + COPY(r7); + COPY(r6); + COPY(r5); + COPY(r4); + COPY(r3); + COPY(r2); + COPY(r1); + COPY(r0); +#undef COPY + + return err; +} + +static inline void __user * +get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize) +{ + unsigned long sp = regs->sp; + + if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp)) + sp = current->sas_ss_sp + current->sas_ss_size; + + return (void __user *)((sp - framesize) & ~3); +} + +static int +setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + int err = 0; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + err = -EFAULT; + if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) + goto out; + + /* + * Set up the return code: + * + * mov r8, __NR_rt_sigreturn + * scall + * + * Note: This will blow up since we're using a non-executable + * stack. Better use SA_RESTORER. + */ +#if __NR_rt_sigreturn > 127 +# error __NR_rt_sigreturn must be < 127 to fit in a short mov +#endif + err = __put_user(0x3008d733 | (__NR_rt_sigreturn << 20), + &frame->retcode); + + err |= copy_siginfo_to_user(&frame->info, info); + + /* Set up the ucontext */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(NULL, &frame->uc.uc_link); + err |= __put_user((void __user *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->sp), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, + &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + if (err) + goto out; + + regs->r12 = sig; + regs->r11 = (unsigned long) &frame->info; + regs->r10 = (unsigned long) &frame->uc; + regs->sp = (unsigned long) frame; + if (ka->sa.sa_flags & SA_RESTORER) + regs->lr = (unsigned long)ka->sa.sa_restorer; + else { + printk(KERN_NOTICE "[%s:%d] did not set SA_RESTORER\n", + current->comm, current->pid); + regs->lr = (unsigned long) &frame->retcode; + } + + pr_debug("SIG deliver [%s:%d]: sig=%d sp=0x%lx pc=0x%lx->0x%p lr=0x%lx\n", + current->comm, current->pid, sig, regs->sp, + regs->pc, ka->sa.sa_handler, regs->lr); + + regs->pc = (unsigned long) ka->sa.sa_handler; + +out: + return err; +} + +static inline void restart_syscall(struct pt_regs *regs) +{ + if (regs->r12 == -ERESTART_RESTARTBLOCK) + regs->r8 = __NR_restart_syscall; + else + regs->r12 = regs->r12_orig; + regs->pc -= 2; +} + +static inline void +handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *oldset, struct pt_regs *regs, int syscall) +{ + int ret; + + /* + * Set up the stack frame + */ + ret = setup_rt_frame(sig, ka, info, oldset, regs); + + /* + * Check that the resulting registers are sane + */ + ret |= !valid_user_regs(regs); + + /* + * Block the signal if we were unsuccessful. + */ + if (ret != 0 || !(ka->sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, + &ka->sa.sa_mask); + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + if (ret == 0) + return; + + force_sigsegv(sig, current); +} + +/* + * Note that 'init' is a special process: it doesn't get signals it + * doesn't want to handle. Thus you cannot kill init even with a + * SIGKILL even by mistake. + */ +int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which is why we may in + * certain cases get here from kernel mode. Just return + * without doing anything if so. + */ + if (!user_mode(regs)) + return 0; + + if (try_to_freeze()) { + signr = 0; + if (!signal_pending(current)) + goto no_signal; + } + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); +no_signal: + if (syscall) { + switch (regs->r12) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + if (signr > 0) { + regs->r12 = -EINTR; + break; + } + /* fall through */ + case -ERESTARTSYS: + if (signr > 0 && !(ka.sa.sa_flags & SA_RESTART)) { + regs->r12 = -EINTR; + break; + } + /* fall through */ + case -ERESTARTNOINTR: + restart_syscall(regs); + } + } + + if (signr == 0) { + /* No signal to deliver -- put the saved sigmask back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + return 0; + } + + handle_signal(signr, &ka, &info, oldset, regs, syscall); + return 1; +} + +asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti) +{ + int syscall = 0; + + if ((sysreg_read(SR) & MODE_MASK) == MODE_SUPERVISOR) + syscall = 1; + + if (ti->flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs, ¤t->blocked, syscall); +} diff --git a/arch/avr32/kernel/switch_to.S b/arch/avr32/kernel/switch_to.S new file mode 100644 index 00000000000..a48d046723c --- /dev/null +++ b/arch/avr32/kernel/switch_to.S @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/sysreg.h> + + .text + .global __switch_to + .type __switch_to, @function + + /* Switch thread context from "prev" to "next", returning "last" + * r12 : prev + * r11 : &prev->thread + 1 + * r10 : &next->thread + */ +__switch_to: + stm --r11, r0,r1,r2,r3,r4,r5,r6,r7,sp,lr + mfsr r9, SYSREG_SR + st.w --r11, r9 + ld.w r8, r10++ + /* + * schedule() may have been called from a mode with a different + * set of registers. Make sure we don't lose anything here. + */ + pushm r10,r12 + mtsr SYSREG_SR, r8 + frs /* flush the return stack */ + sub pc, -2 /* flush the pipeline */ + popm r10,r12 + ldm r10++, r0,r1,r2,r3,r4,r5,r6,r7,sp,pc + .size __switch_to, . - __switch_to diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c new file mode 100644 index 00000000000..6ec5693da44 --- /dev/null +++ b/arch/avr32/kernel/sys_avr32.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/file.h> +#include <linux/mm.h> +#include <linux/unistd.h> + +#include <asm/mman.h> +#include <asm/uaccess.h> + +asmlinkage int sys_pipe(unsigned long __user *filedes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(filedes, fd, sizeof(fd))) + error = -EFAULT; + } + return error; +} + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, off_t offset) +{ + int error = -EBADF; + struct file *file = NULL; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + return error; + } + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, offset); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); + return error; +} diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S new file mode 100644 index 00000000000..7589a9b426c --- /dev/null +++ b/arch/avr32/kernel/syscall-stubs.S @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Stubs for syscalls that require access to pt_regs or that take more + * than five parameters. + */ + +#define ARG6 r3 + + .text + .global __sys_rt_sigsuspend + .type __sys_rt_sigsuspend,@function +__sys_rt_sigsuspend: + mov r10, sp + rjmp sys_rt_sigsuspend + + .global __sys_sigaltstack + .type __sys_sigaltstack,@function +__sys_sigaltstack: + mov r10, sp + rjmp sys_sigaltstack + + .global __sys_rt_sigreturn + .type __sys_rt_sigreturn,@function +__sys_rt_sigreturn: + mov r12, sp + rjmp sys_rt_sigreturn + + .global __sys_fork + .type __sys_fork,@function +__sys_fork: + mov r12, sp + rjmp sys_fork + + .global __sys_clone + .type __sys_clone,@function +__sys_clone: + mov r8, sp + rjmp sys_clone + + .global __sys_vfork + .type __sys_vfork,@function +__sys_vfork: + mov r12, sp + rjmp sys_vfork + + .global __sys_execve + .type __sys_execve,@function +__sys_execve: + mov r9, sp + rjmp sys_execve + + .global __sys_mmap2 + .type __sys_mmap2,@function +__sys_mmap2: + pushm lr + st.w --sp, ARG6 + rcall sys_mmap2 + sub sp, -4 + popm pc + + .global __sys_sendto + .type __sys_sendto,@function +__sys_sendto: + pushm lr + st.w --sp, ARG6 + rcall sys_sendto + sub sp, -4 + popm pc + + .global __sys_recvfrom + .type __sys_recvfrom,@function +__sys_recvfrom: + pushm lr + st.w --sp, ARG6 + rcall sys_recvfrom + sub sp, -4 + popm pc + + .global __sys_pselect6 + .type __sys_pselect6,@function +__sys_pselect6: + pushm lr + st.w --sp, ARG6 + rcall sys_pselect6 + sub sp, -4 + popm pc + + .global __sys_splice + .type __sys_splice,@function +__sys_splice: + pushm lr + st.w --sp, ARG6 + rcall sys_splice + sub sp, -4 + popm pc diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S new file mode 100644 index 00000000000..63b206965d0 --- /dev/null +++ b/arch/avr32/kernel/syscall_table.S @@ -0,0 +1,289 @@ +/* + * AVR32 system call table + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) +#define sys_nfsservctl sys_ni_syscall +#endif + +#if !defined(CONFIG_SYSV_IPC) +# define sys_ipc sys_ni_syscall +#endif + + .section .rodata,"a",@progbits + .type sys_call_table,@object + .global sys_call_table + .align 2 +sys_call_table: + .long sys_restart_syscall + .long sys_exit + .long __sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_umask + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long __sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_chown + .long sys_lchown + .long sys_lseek + .long sys_llseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_umount + .long sys_setuid + .long sys_getuid + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_pause + .long sys_utime + .long sys_newstat /* 30 */ + .long sys_newfstat + .long sys_newlstat + .long sys_access + .long sys_chroot + .long sys_sync /* 35 */ + .long sys_fsync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long __sys_clone + .long sys_brk /* 45 */ + .long sys_setgid + .long sys_getgid + .long sys_getcwd + .long sys_geteuid + .long sys_getegid /* 50 */ + .long sys_acct + .long sys_setfsuid + .long sys_setfsgid + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_setpgid + .long sys_mremap + .long sys_setresuid + .long sys_getresuid + .long sys_setreuid /* 60 */ + .long sys_setregid + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_rt_sigaction + .long __sys_rt_sigreturn + .long sys_rt_sigprocmask + .long sys_rt_sigpending /* 70 */ + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long __sys_rt_sigsuspend + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups /* 80 */ + .long sys_setgroups + .long sys_select + .long sys_symlink + .long sys_fchdir + .long sys_readlink /* 85 */ + .long sys_pread64 + .long sys_pwrite64 + .long sys_swapon + .long sys_reboot + .long __sys_mmap2 /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_wait4 + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_vhangup + .long __sys_sigaltstack + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_swapoff + .long sys_sysinfo + .long sys_ipc + .long sys_sendfile + .long sys_setdomainname /* 110 */ + .long sys_newuname + .long sys_adjtimex + .long sys_mprotect + .long __sys_vfork + .long sys_init_module /* 115 */ + .long sys_delete_module + .long sys_quotactl + .long sys_getpgid + .long sys_bdflush + .long sys_sysfs /* 120 */ + .long sys_personality + .long sys_ni_syscall /* reserved for afs_syscall */ + .long sys_getdents + .long sys_flock + .long sys_msync /* 125 */ + .long sys_readv + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl /* 130 */ + .long sys_mlock + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam /* 135 */ + .long sys_sched_getparam + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max /* 140 */ + .long sys_sched_get_priority_min + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_poll + .long sys_nfsservctl /* 145 */ + .long sys_setresgid + .long sys_getresgid + .long sys_prctl + .long sys_socket + .long sys_bind /* 150 */ + .long sys_connect + .long sys_listen + .long sys_accept + .long sys_getsockname + .long sys_getpeername /* 155 */ + .long sys_socketpair + .long sys_send + .long sys_recv + .long __sys_sendto + .long __sys_recvfrom /* 160 */ + .long sys_shutdown + .long sys_setsockopt + .long sys_getsockopt + .long sys_sendmsg + .long sys_recvmsg /* 165 */ + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 + .long sys_lstat64 + .long sys_fstat64 /* 170 */ + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 + .long sys_fcntl64 /* 175 */ + .long sys_gettid + .long sys_readahead + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr /* 180 */ + .long sys_getxattr + .long sys_lgetxattr + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr /* 185 */ + .long sys_flistxattr + .long sys_removexattr + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill /* 190 */ + .long sys_sendfile64 + .long sys_futex + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_capget /* 195 */ + .long sys_capset + .long sys_io_setup + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit /* 200 */ + .long sys_io_cancel + .long sys_fadvise64 + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create /* 205 */ + .long sys_epoll_ctl + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create /* 210 */ + .long sys_timer_settime + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime /* 215 */ + .long sys_clock_gettime + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 /* 220 */ + .long sys_tgkill + .long sys_ni_syscall /* reserved for TUX */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_cacheflush /* 225 */ + .long sys_ni_syscall /* sys_vserver */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 230 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_kexec_load + .long sys_waitid + .long sys_add_key /* 235 */ + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init /* 240 */ + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_openat + .long sys_mkdirat + .long sys_mknodat /* 245 */ + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 + .long sys_unlinkat + .long sys_renameat /* 250 */ + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat + .long sys_fchmodat + .long sys_faccessat /* 255 */ + .long __sys_pselect6 + .long sys_ppoll + .long sys_unshare + .long sys_set_robust_list + .long sys_get_robust_list /* 260 */ + .long __sys_splice + .long sys_sync_file_range + .long sys_tee + .long sys_vmsplice + .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c new file mode 100644 index 00000000000..b0e6b5855a3 --- /dev/null +++ b/arch/avr32/kernel/time.c @@ -0,0 +1,238 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on MIPS implementation arch/mips/kernel/time.c + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/clocksource.h> +#include <linux/time.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel_stat.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/profile.h> +#include <linux/sysdev.h> + +#include <asm/div64.h> +#include <asm/sysreg.h> +#include <asm/io.h> +#include <asm/sections.h> + +static cycle_t read_cycle_count(void) +{ + return (cycle_t)sysreg_read(COUNT); +} + +static struct clocksource clocksource_avr32 = { + .name = "avr32", + .rating = 350, + .read = read_cycle_count, + .mask = CLOCKSOURCE_MASK(32), + .shift = 16, + .is_continuous = 1, +}; + +/* + * By default we provide the null RTC ops + */ +static unsigned long null_rtc_get_time(void) +{ + return mktime(2004, 1, 1, 0, 0, 0); +} + +static int null_rtc_set_time(unsigned long sec) +{ + return 0; +} + +static unsigned long (*rtc_get_time)(void) = null_rtc_get_time; +static int (*rtc_set_time)(unsigned long) = null_rtc_set_time; + +/* how many counter cycles in a jiffy? */ +static unsigned long cycles_per_jiffy; + +/* cycle counter value at the previous timer interrupt */ +static unsigned int timerhi, timerlo; + +/* the count value for the next timer interrupt */ +static unsigned int expirelo; + +static void avr32_timer_ack(void) +{ + unsigned int count; + + /* Ack this timer interrupt and set the next one */ + expirelo += cycles_per_jiffy; + if (expirelo == 0) { + printk(KERN_DEBUG "expirelo == 0\n"); + sysreg_write(COMPARE, expirelo + 1); + } else { + sysreg_write(COMPARE, expirelo); + } + + /* Check to see if we have missed any timer interrupts */ + count = sysreg_read(COUNT); + if ((count - expirelo) < 0x7fffffff) { + expirelo = count + cycles_per_jiffy; + sysreg_write(COMPARE, expirelo); + } +} + +static unsigned int avr32_hpt_read(void) +{ + return sysreg_read(COUNT); +} + +/* + * Taken from MIPS c0_hpt_timer_init(). + * + * Why is it so complicated, and what is "count"? My assumption is + * that `count' specifies the "reference cycle", i.e. the cycle since + * reset that should mean "zero". The reason COUNT is written twice is + * probably to make sure we don't get any timer interrupts while we + * are messing with the counter. + */ +static void avr32_hpt_init(unsigned int count) +{ + count = sysreg_read(COUNT) - count; + expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy; + sysreg_write(COUNT, expirelo - cycles_per_jiffy); + sysreg_write(COMPARE, expirelo); + sysreg_write(COUNT, count); +} + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long sched_clock(void) +{ + /* There must be better ways...? */ + return (unsigned long long)jiffies * (1000000000 / HZ); +} + +/* + * local_timer_interrupt() does profiling and process accounting on a + * per-CPU basis. + * + * In UP mode, it is invoked from the (global) timer_interrupt. + */ +static void local_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + if (current->pid) + profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(regs)); +} + +static irqreturn_t +timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned int count; + + /* ack timer interrupt and try to set next interrupt */ + count = avr32_hpt_read(); + avr32_timer_ack(); + + /* Update timerhi/timerlo for intra-jiffy calibration */ + timerhi += count < timerlo; /* Wrap around */ + timerlo = count; + + /* + * Call the generic timer interrupt handler + */ + write_seqlock(&xtime_lock); + do_timer(regs); + write_sequnlock(&xtime_lock); + + /* + * In UP mode, we call local_timer_interrupt() to do profiling + * and process accounting. + * + * SMP is not supported yet. + */ + local_timer_interrupt(irq, dev_id, regs); + + return IRQ_HANDLED; +} + +static struct irqaction timer_irqaction = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED, + .name = "timer", +}; + +void __init time_init(void) +{ + unsigned long mult, shift, count_hz; + int ret; + + xtime.tv_sec = rtc_get_time(); + xtime.tv_nsec = 0; + + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + printk("Before time_init: count=%08lx, compare=%08lx\n", + (unsigned long)sysreg_read(COUNT), + (unsigned long)sysreg_read(COMPARE)); + + count_hz = clk_get_rate(boot_cpu_data.clk); + shift = clocksource_avr32.shift; + mult = clocksource_hz2mult(count_hz, shift); + clocksource_avr32.mult = mult; + + printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift); + + { + u64 tmp; + + tmp = TICK_NSEC; + tmp <<= shift; + tmp += mult / 2; + do_div(tmp, mult); + + cycles_per_jiffy = tmp; + } + + /* This sets up the high precision timer for the first interrupt. */ + avr32_hpt_init(avr32_hpt_read()); + + printk("After time_init: count=%08lx, compare=%08lx\n", + (unsigned long)sysreg_read(COUNT), + (unsigned long)sysreg_read(COMPARE)); + + ret = clocksource_register(&clocksource_avr32); + if (ret) + printk(KERN_ERR + "timer: could not register clocksource: %d\n", ret); + + ret = setup_irq(0, &timer_irqaction); + if (ret) + printk("timer: could not request IRQ 0: %d\n", ret); +} + +static struct sysdev_class timer_class = { + set_kset_name("timer"), +}; + +static struct sys_device timer_device = { + .id = 0, + .cls = &timer_class, +}; + +static int __init init_timer_sysfs(void) +{ + int err = sysdev_class_register(&timer_class); + if (!err) + err = sysdev_register(&timer_device); + return err; +} + +device_initcall(init_timer_sysfs); diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c new file mode 100644 index 00000000000..7e803f4d7a1 --- /dev/null +++ b/arch/avr32/kernel/traps.c @@ -0,0 +1,425 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/notifier.h> + +#include <asm/traps.h> +#include <asm/sysreg.h> +#include <asm/addrspace.h> +#include <asm/ocd.h> +#include <asm/mmu_context.h> +#include <asm/uaccess.h> + +static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +{ + unsigned long p; + int i; + + printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); + + for (p = bottom & ~31; p < top; ) { + printk("%04lx: ", p & 0xffff); + + for (i = 0; i < 8; i++, p += 4) { + unsigned int val; + + if (p < bottom || p >= top) + printk(" "); + else { + if (__get_user(val, (unsigned int __user *)p)) { + printk("\n"); + goto out; + } + printk("%08x ", val); + } + } + printk("\n"); + } + +out: + return; +} + +#ifdef CONFIG_FRAME_POINTER +static inline void __show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs) +{ + unsigned long __user *fp; + unsigned long __user *last_fp = NULL; + + if (regs) { + fp = (unsigned long __user *)regs->r7; + } else if (tsk == current) { + register unsigned long __user *real_fp __asm__("r7"); + fp = real_fp; + } else { + fp = (unsigned long __user *)tsk->thread.cpu_context.r7; + } + + /* + * Walk the stack until (a) we get an exception, (b) the frame + * pointer becomes zero, or (c) the frame pointer gets stuck + * at the same value. + */ + while (fp && fp != last_fp) { + unsigned long lr, new_fp = 0; + + last_fp = fp; + if (__get_user(lr, fp)) + break; + if (fp && __get_user(new_fp, fp + 1)) + break; + fp = (unsigned long __user *)new_fp; + + printk(" [<%08lx>] ", lr); + print_symbol("%s\n", lr); + } + printk("\n"); +} +#else +static inline void __show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs) +{ + unsigned long addr; + + while (!kstack_end(sp)) { + addr = *sp++; + if (kernel_text_address(addr)) { + printk(" [<%08lx>] ", addr); + print_symbol("%s\n", addr); + } + } +} +#endif + +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs) +{ + if (regs && + (((regs->sr & MODE_MASK) == MODE_EXCEPTION) || + ((regs->sr & MODE_MASK) == MODE_USER))) + return; + + printk ("Call trace:"); +#ifdef CONFIG_KALLSYMS + printk("\n"); +#endif + + __show_trace(tsk, sp, regs); + printk("\n"); +} + +void show_stack(struct task_struct *tsk, unsigned long *sp) +{ + unsigned long stack; + + if (!tsk) + tsk = current; + if (sp == 0) { + if (tsk == current) { + register unsigned long *real_sp __asm__("sp"); + sp = real_sp; + } else { + sp = (unsigned long *)tsk->thread.cpu_context.ksp; + } + } + + stack = (unsigned long)sp; + dump_mem("Stack: ", stack, + THREAD_SIZE + (unsigned long)tsk->thread_info); + show_trace(tsk, sp, NULL); +} + +void dump_stack(void) +{ + show_stack(NULL, NULL); +} +EXPORT_SYMBOL(dump_stack); + +ATOMIC_NOTIFIER_HEAD(avr32_die_chain); + +int register_die_notifier(struct notifier_block *nb) +{ + pr_debug("register_die_notifier: %p\n", nb); + + return atomic_notifier_chain_register(&avr32_die_chain, nb); +} +EXPORT_SYMBOL(register_die_notifier); + +int unregister_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&avr32_die_chain, nb); +} +EXPORT_SYMBOL(unregister_die_notifier); + +static DEFINE_SPINLOCK(die_lock); + +void __die(const char *str, struct pt_regs *regs, unsigned long err, + const char *file, const char *func, unsigned long line) +{ + struct task_struct *tsk = current; + static int die_counter; + + console_verbose(); + spin_lock_irq(&die_lock); + bust_spinlocks(1); + + printk(KERN_ALERT "%s", str); + if (file && func) + printk(" in %s:%s, line %ld", file, func, line); + printk("[#%d]:\n", ++die_counter); + print_modules(); + show_regs(regs); + printk("Process %s (pid: %d, stack limit = 0x%p)\n", + tsk->comm, tsk->pid, tsk->thread_info + 1); + + if (!user_mode(regs) || in_interrupt()) { + dump_mem("Stack: ", regs->sp, + THREAD_SIZE + (unsigned long)tsk->thread_info); + } + + bust_spinlocks(0); + spin_unlock_irq(&die_lock); + do_exit(SIGSEGV); +} + +void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err, + const char *file, const char *func, unsigned long line) +{ + if (!user_mode(regs)) + __die(str, regs, err, file, func, line); +} + +asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) +{ +#ifdef CONFIG_SUBARCH_AVR32B + /* + * The exception entry always saves RSR_EX. For NMI, this is + * wrong; it should be RSR_NMI + */ + regs->sr = sysreg_read(RSR_NMI); +#endif + + printk("NMI taken!!!!\n"); + die("NMI", regs, ecr); + BUG(); +} + +asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs) +{ + printk("Unable to handle critical exception %lu at pc = %08lx!\n", + ecr, regs->pc); + die("Oops", regs, ecr); + BUG(); +} + +asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs) +{ + siginfo_t info; + + die_if_kernel("Oops: Address exception in kernel mode", regs, ecr); + +#ifdef DEBUG + if (ecr == ECR_ADDR_ALIGN_X) + pr_debug("Instruction Address Exception at pc = %08lx\n", + regs->pc); + else if (ecr == ECR_ADDR_ALIGN_R) + pr_debug("Data Address Exception (Read) at pc = %08lx\n", + regs->pc); + else if (ecr == ECR_ADDR_ALIGN_W) + pr_debug("Data Address Exception (Write) at pc = %08lx\n", + regs->pc); + else + BUG(); + + show_regs(regs); +#endif + + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRALN; + info.si_addr = (void __user *)regs->pc; + + force_sig_info(SIGBUS, &info, current); +} + +/* This way of handling undefined instructions is stolen from ARM */ +static LIST_HEAD(undef_hook); +static spinlock_t undef_lock = SPIN_LOCK_UNLOCKED; + +void register_undef_hook(struct undef_hook *hook) +{ + spin_lock_irq(&undef_lock); + list_add(&hook->node, &undef_hook); + spin_unlock_irq(&undef_lock); +} + +void unregister_undef_hook(struct undef_hook *hook) +{ + spin_lock_irq(&undef_lock); + list_del(&hook->node); + spin_unlock_irq(&undef_lock); +} + +static int do_cop_absent(u32 insn) +{ + int cop_nr; + u32 cpucr; + if ( (insn & 0xfdf00000) == 0xf1900000 ) + /* LDC0 */ + cop_nr = 0; + else + cop_nr = (insn >> 13) & 0x7; + + /* Try enabling the coprocessor */ + cpucr = sysreg_read(CPUCR); + cpucr |= (1 << (24 + cop_nr)); + sysreg_write(CPUCR, cpucr); + + cpucr = sysreg_read(CPUCR); + if ( !(cpucr & (1 << (24 + cop_nr))) ){ + printk("Coprocessor #%i not found!\n", cop_nr); + return -1; + } + + return 0; +} + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +static inline void do_bug_verbose(struct pt_regs *regs, u32 insn) +{ + char *file; + u16 line; + char c; + + if (__get_user(line, (u16 __user *)(regs->pc + 2))) + return; + if (__get_user(file, (char * __user *)(regs->pc + 4)) + || (unsigned long)file < PAGE_OFFSET + || __get_user(c, file)) + file = "<bad filename>"; + + printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line); +} +#else +static inline void do_bug_verbose(struct pt_regs *regs, u32 insn) +{ + +} +#endif +#endif + +asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs) +{ + u32 insn; + struct undef_hook *hook; + siginfo_t info; + void __user *pc; + + if (!user_mode(regs)) + goto kernel_trap; + + local_irq_enable(); + + pc = (void __user *)instruction_pointer(regs); + if (__get_user(insn, (u32 __user *)pc)) + goto invalid_area; + + if (ecr == ECR_COPROC_ABSENT) { + if (do_cop_absent(insn) == 0) + return; + } + + spin_lock_irq(&undef_lock); + list_for_each_entry(hook, &undef_hook, node) { + if ((insn & hook->insn_mask) == hook->insn_val) { + if (hook->fn(regs, insn) == 0) { + spin_unlock_irq(&undef_lock); + return; + } + } + } + spin_unlock_irq(&undef_lock); + +invalid_area: + +#ifdef DEBUG + printk("Illegal instruction at pc = %08lx\n", regs->pc); + if (regs->pc < TASK_SIZE) { + unsigned long ptbr, pgd, pte, *p; + + ptbr = sysreg_read(PTBR); + p = (unsigned long *)ptbr; + pgd = p[regs->pc >> 22]; + p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000); + pte = p[(regs->pc >> 12) & 0x3ff]; + printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte); + } +#endif + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_addr = (void __user *)regs->pc; + switch (ecr) { + case ECR_ILLEGAL_OPCODE: + case ECR_UNIMPL_INSTRUCTION: + info.si_code = ILL_ILLOPC; + break; + case ECR_PRIVILEGE_VIOLATION: + info.si_code = ILL_PRVOPC; + break; + case ECR_COPROC_ABSENT: + info.si_code = ILL_COPROC; + break; + default: + BUG(); + } + + force_sig_info(SIGILL, &info, current); + return; + +kernel_trap: +#ifdef CONFIG_BUG + if (__kernel_text_address(instruction_pointer(regs))) { + insn = *(u16 *)instruction_pointer(regs); + if (insn == AVR32_BUG_OPCODE) { + do_bug_verbose(regs, insn); + die("Kernel BUG", regs, 0); + return; + } + } +#endif + + die("Oops: Illegal instruction in kernel code", regs, ecr); +} + +asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs) +{ + siginfo_t info; + + printk("Floating-point exception at pc = %08lx\n", regs->pc); + + /* We have no FPU... */ + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_addr = (void __user *)regs->pc; + info.si_code = ILL_COPROC; + + force_sig_info(SIGILL, &info, current); +} + + +void __init trap_init(void) +{ + +} diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c new file mode 100644 index 00000000000..cdd627c6b7d --- /dev/null +++ b/arch/avr32/kernel/vmlinux.lds.c @@ -0,0 +1,139 @@ +/* + * AVR32 linker script for the Linux kernel + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define LOAD_OFFSET 0x00000000 +#include <asm-generic/vmlinux.lds.h> + +OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32") +OUTPUT_ARCH(avr32) +ENTRY(_start) + +/* Big endian */ +jiffies = jiffies_64 + 4; + +SECTIONS +{ + . = CONFIG_ENTRY_ADDRESS; + .init : AT(ADDR(.init) - LOAD_OFFSET) { + _stext = .; + __init_begin = .; + _sinittext = .; + *(.text.reset) + *(.init.text) + _einittext = .; + . = ALIGN(4); + __tagtable_begin = .; + *(.taglist) + __tagtable_end = .; + *(.init.data) + . = ALIGN(16); + __setup_start = .; + *(.init.setup) + __setup_end = .; + . = ALIGN(4); + __initcall_start = .; + *(.initcall1.init) + *(.initcall2.init) + *(.initcall3.init) + *(.initcall4.init) + *(.initcall5.init) + *(.initcall6.init) + *(.initcall7.init) + __initcall_end = .; + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + __security_initcall_start = .; + *(.security_initcall.init) + __security_initcall_end = .; + . = ALIGN(32); + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + . = ALIGN(4096); + __init_end = .; + } + + . = ALIGN(8192); + .text : AT(ADDR(.text) - LOAD_OFFSET) { + _evba = .; + _text = .; + *(.ex.text) + . = 0x50; + *(.tlbx.ex.text) + . = 0x60; + *(.tlbr.ex.text) + . = 0x70; + *(.tlbw.ex.text) + . = 0x100; + *(.scall.text) + *(.irq.text) + *(.text) + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) + _etext = .; + } = 0xd703d703 + + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } + + RODATA + + . = ALIGN(8192); + + .data : AT(ADDR(.data) - LOAD_OFFSET) { + _data = .; + _sdata = .; + /* + * First, the init task union, aligned to an 8K boundary. + */ + *(.data.init_task) + + /* Then, the cacheline aligned data */ + . = ALIGN(32); + *(.data.cacheline_aligned) + + /* And the rest... */ + *(.data.rel*) + *(.data) + CONSTRUCTORS + + _edata = .; + } + + + . = ALIGN(8); + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __bss_start = .; + *(.bss) + *(COMMON) + . = ALIGN(8); + __bss_stop = .; + _end = .; + } + + /* When something in the kernel is NOT compiled as a module, the module + * cleanup code and data are put into these segments. Both can then be + * thrown away, as cleanup code is never called unless it's a module. + */ + /DISCARD/ : { + *(.exit.text) + *(.exit.data) + *(.exitcall.exit) + } + + DWARF_DEBUG +} diff --git a/arch/avr32/lib/Makefile b/arch/avr32/lib/Makefile new file mode 100644 index 00000000000..09ac43e4052 --- /dev/null +++ b/arch/avr32/lib/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for AVR32-specific library files +# + +lib-y := copy_user.o clear_user.o +lib-y += strncpy_from_user.o strnlen_user.o +lib-y += delay.o memset.o memcpy.o findbit.o +lib-y += csum_partial.o csum_partial_copy_generic.o +lib-y += io-readsw.o io-readsl.o io-writesw.o io-writesl.o +lib-y += __avr32_lsl64.o __avr32_lsr64.o __avr32_asr64.o diff --git a/arch/avr32/lib/__avr32_asr64.S b/arch/avr32/lib/__avr32_asr64.S new file mode 100644 index 00000000000..368b6bca4c7 --- /dev/null +++ b/arch/avr32/lib/__avr32_asr64.S @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + /* + * DWtype __avr32_asr64(DWtype u, word_type b) + */ + .text + .global __avr32_asr64 + .type __avr32_asr64,@function +__avr32_asr64: + cp.w r12, 0 + reteq r12 + + rsub r9, r12, 32 + brle 1f + + lsl r8, r11, r9 + lsr r10, r10, r12 + asr r11, r11, r12 + or r10, r8 + retal r12 + +1: neg r9 + asr r10, r11, r9 + asr r11, 31 + retal r12 diff --git a/arch/avr32/lib/__avr32_lsl64.S b/arch/avr32/lib/__avr32_lsl64.S new file mode 100644 index 00000000000..f1dbc2b3625 --- /dev/null +++ b/arch/avr32/lib/__avr32_lsl64.S @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + /* + * DWtype __avr32_lsl64(DWtype u, word_type b) + */ + .text + .global __avr32_lsl64 + .type __avr32_lsl64,@function +__avr32_lsl64: + cp.w r12, 0 + reteq r12 + + rsub r9, r12, 32 + brle 1f + + lsr r8, r10, r9 + lsl r10, r10, r12 + lsl r11, r11, r12 + or r11, r8 + retal r12 + +1: neg r9 + lsl r11, r10, r9 + mov r10, 0 + retal r12 diff --git a/arch/avr32/lib/__avr32_lsr64.S b/arch/avr32/lib/__avr32_lsr64.S new file mode 100644 index 00000000000..e65bb7f0d24 --- /dev/null +++ b/arch/avr32/lib/__avr32_lsr64.S @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + /* + * DWtype __avr32_lsr64(DWtype u, word_type b) + */ + .text + .global __avr32_lsr64 + .type __avr32_lsr64,@function +__avr32_lsr64: + cp.w r12, 0 + reteq r12 + + rsub r9, r12, 32 + brle 1f + + lsl r8, r11, r9 + lsr r11, r11, r12 + lsr r10, r10, r12 + or r10, r8 + retal r12 + +1: neg r9 + lsr r10, r11, r9 + mov r11, 0 + retal r12 diff --git a/arch/avr32/lib/clear_user.S b/arch/avr32/lib/clear_user.S new file mode 100644 index 00000000000..d8991b6f8eb --- /dev/null +++ b/arch/avr32/lib/clear_user.S @@ -0,0 +1,76 @@ +/* + * Copyright 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/asm.h> + + .text + .align 1 + .global clear_user + .type clear_user, "function" +clear_user: + branch_if_kernel r8, __clear_user + ret_if_privileged r8, r12, r11, r11 + + .global __clear_user + .type __clear_user, "function" +__clear_user: + mov r9, r12 + mov r8, 0 + andl r9, 3, COH + brne 5f + +1: sub r11, 4 + brlt 2f + +10: st.w r12++, r8 + sub r11, 4 + brge 10b + +2: sub r11, -4 + reteq 0 + + /* Unaligned count or address */ + bld r11, 1 + brcc 12f +11: st.h r12++, r8 + sub r11, 2 + reteq 0 +12: st.b r12++, r8 + retal 0 + + /* Unaligned address */ +5: cp.w r11, 4 + brlt 2b + + lsl r9, 2 + add pc, pc, r9 +13: st.b r12++, r8 + sub r11, 1 +14: st.b r12++, r8 + sub r11, 1 +15: st.b r12++, r8 + sub r11, 1 + rjmp 1b + + .size clear_user, . - clear_user + .size __clear_user, . - __clear_user + + .section .fixup, "ax" + .align 1 +18: sub r11, -4 +19: retal r11 + + .section __ex_table, "a" + .align 2 + .long 10b, 18b + .long 11b, 19b + .long 12b, 19b + .long 13b, 19b + .long 14b, 19b + .long 15b, 19b diff --git a/arch/avr32/lib/copy_user.S b/arch/avr32/lib/copy_user.S new file mode 100644 index 00000000000..ea59c04b07d --- /dev/null +++ b/arch/avr32/lib/copy_user.S @@ -0,0 +1,119 @@ +/* + * Copy to/from userspace with optional address space checking. + * + * Copyright 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/asm.h> + + /* + * __kernel_size_t + * __copy_user(void *to, const void *from, __kernel_size_t n) + * + * Returns the number of bytes not copied. Might be off by + * max 3 bytes if we get a fault in the main loop. + * + * The address-space checking functions simply fall through to + * the non-checking version. + */ + .text + .align 1 + .global copy_from_user + .type copy_from_user, @function +copy_from_user: + branch_if_kernel r8, __copy_user + ret_if_privileged r8, r11, r10, r10 + rjmp __copy_user + .size copy_from_user, . - copy_from_user + + .global copy_to_user + .type copy_to_user, @function +copy_to_user: + branch_if_kernel r8, __copy_user + ret_if_privileged r8, r12, r10, r10 + .size copy_to_user, . - copy_to_user + + .global __copy_user + .type __copy_user, @function +__copy_user: + mov r9, r11 + andl r9, 3, COH + brne 6f + + /* At this point, from is word-aligned */ +1: sub r10, 4 + brlt 3f + +2: +10: ld.w r8, r11++ +11: st.w r12++, r8 + sub r10, 4 + brge 2b + +3: sub r10, -4 + reteq 0 + + /* + * Handle unaligned count. Need to be careful with r10 here so + * that we return the correct value even if we get a fault + */ +4: +20: ld.ub r8, r11++ +21: st.b r12++, r8 + sub r10, 1 + reteq 0 +22: ld.ub r8, r11++ +23: st.b r12++, r8 + sub r10, 1 + reteq 0 +24: ld.ub r8, r11++ +25: st.b r12++, r8 + retal 0 + + /* Handle unaligned from-pointer */ +6: cp.w r10, 4 + brlt 4b + rsub r9, r9, 4 + +30: ld.ub r8, r11++ +31: st.b r12++, r8 + sub r10, 1 + sub r9, 1 + breq 1b +32: ld.ub r8, r11++ +33: st.b r12++, r8 + sub r10, 1 + sub r9, 1 + breq 1b +34: ld.ub r8, r11++ +35: st.b r12++, r8 + sub r10, 1 + rjmp 1b + .size __copy_user, . - __copy_user + + .section .fixup,"ax" + .align 1 +19: sub r10, -4 +29: retal r10 + + .section __ex_table,"a" + .align 2 + .long 10b, 19b + .long 11b, 19b + .long 20b, 29b + .long 21b, 29b + .long 22b, 29b + .long 23b, 29b + .long 24b, 29b + .long 25b, 29b + .long 30b, 29b + .long 31b, 29b + .long 32b, 29b + .long 33b, 29b + .long 34b, 29b + .long 35b, 29b diff --git a/arch/avr32/lib/csum_partial.S b/arch/avr32/lib/csum_partial.S new file mode 100644 index 00000000000..6a262b528eb --- /dev/null +++ b/arch/avr32/lib/csum_partial.S @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + /* + * unsigned int csum_partial(const unsigned char *buff, + * int len, unsigned int sum) + */ + .text + .global csum_partial + .type csum_partial,"function" + .align 1 +csum_partial: + /* checksum complete words, aligned or not */ +3: sub r11, 4 + brlt 5f +4: ld.w r9, r12++ + add r10, r9 + acr r10 + sub r11, 4 + brge 4b + + /* return if we had a whole number of words */ +5: sub r11, -4 + reteq r10 + + /* checksum any remaining bytes at the end */ + mov r9, 0 + mov r8, 0 + cp r11, 2 + brlt 6f + ld.uh r9, r12++ + sub r11, 2 + breq 7f + lsl r9, 16 +6: ld.ub r8, r12++ + lsl r8, 8 +7: or r9, r8 + add r10, r9 + acr r10 + + retal r10 + .size csum_partial, . - csum_partial diff --git a/arch/avr32/lib/csum_partial_copy_generic.S b/arch/avr32/lib/csum_partial_copy_generic.S new file mode 100644 index 00000000000..a3a0f9b8929 --- /dev/null +++ b/arch/avr32/lib/csum_partial_copy_generic.S @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/errno.h> +#include <asm/asm.h> + + /* + * unsigned int csum_partial_copy_generic(const char *src, char *dst, int len + * int sum, int *src_err_ptr, + * int *dst_err_ptr) + * + * Copy src to dst while checksumming, otherwise like csum_partial. + */ + + .macro ld_src size, reg, ptr +9999: ld.\size \reg, \ptr + .section __ex_table, "a" + .long 9999b, fixup_ld_src + .previous + .endm + + .macro st_dst size, ptr, reg +9999: st.\size \ptr, \reg + .section __ex_table, "a" + .long 9999b, fixup_st_dst + .previous + .endm + + .text + .global csum_partial_copy_generic + .type csum_partial_copy_generic,"function" + .align 1 +csum_partial_copy_generic: + pushm r4-r7,lr + + /* The inner loop */ +1: sub r10, 4 + brlt 5f +2: ld_src w, r5, r12++ + st_dst w, r11++, r5 + add r9, r5 + acr r9 + sub r10, 4 + brge 2b + + /* return if we had a whole number of words */ +5: sub r10, -4 + brne 7f + +6: mov r12, r9 + popm r4-r7,pc + + /* handle additional bytes at the tail */ +7: mov r5, 0 + mov r4, 32 +8: ld_src ub, r6, r12++ + st_dst b, r11++, r6 + lsl r5, 8 + sub r4, 8 + bfins r5, r6, 0, 8 + sub r10, 1 + brne 8b + + lsl r5, r5, r4 + add r9, r5 + acr r9 + rjmp 6b + + /* Exception handler */ + .section .fixup,"ax" + .align 1 +fixup_ld_src: + mov r9, -EFAULT + cp.w r8, 0 + breq 1f + st.w r8[0], r9 + +1: /* + * TODO: zero the complete destination - computing the rest + * is too much work + */ + + mov r9, 0 + rjmp 6b + +fixup_st_dst: + mov r9, -EFAULT + lddsp r8, sp[20] + cp.w r8, 0 + breq 1f + st.w r8[0], r9 +1: mov r9, 0 + rjmp 6b + + .previous diff --git a/arch/avr32/lib/delay.c b/arch/avr32/lib/delay.c new file mode 100644 index 00000000000..462c8307b68 --- /dev/null +++ b/arch/avr32/lib/delay.c @@ -0,0 +1,55 @@ +/* + * Precise Delay Loops for avr32 + * + * Copyright (C) 1993 Linus Torvalds + * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz> + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/types.h> + +#include <asm/delay.h> +#include <asm/processor.h> +#include <asm/sysreg.h> + +int read_current_timer(unsigned long *timer_value) +{ + *timer_value = sysreg_read(COUNT); + return 0; +} + +void __delay(unsigned long loops) +{ + unsigned bclock, now; + + bclock = sysreg_read(COUNT); + do { + now = sysreg_read(COUNT); + } while ((now - bclock) < loops); +} + +inline void __const_udelay(unsigned long xloops) +{ + unsigned long long loops; + + asm("mulu.d %0, %1, %2" + : "=r"(loops) + : "r"(current_cpu_data.loops_per_jiffy * HZ), "r"(xloops)); + __delay(loops >> 32); +} + +void __udelay(unsigned long usecs) +{ + __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */ +} + +void __ndelay(unsigned long nsecs) +{ + __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ +} diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S new file mode 100644 index 00000000000..2b4856f4bf7 --- /dev/null +++ b/arch/avr32/lib/findbit.S @@ -0,0 +1,154 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> + + .text + /* + * unsigned long find_first_zero_bit(const unsigned long *addr, + * unsigned long size) + */ +ENTRY(find_first_zero_bit) + cp.w r11, 0 + reteq r11 + mov r9, r11 +1: ld.w r8, r12[0] + com r8 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + + /* + * unsigned long find_next_zero_bit(const unsigned long *addr, + * unsigned long size, + * unsigned long offset) + */ +ENTRY(find_next_zero_bit) + lsr r8, r10, 5 + sub r9, r11, r10 + retle r11 + + lsl r8, 2 + add r12, r8 + andl r10, 31, COH + breq 1f + + /* offset is not word-aligned. Handle the first (32 - r10) bits */ + ld.w r8, r12[0] + com r8 + sub r12, -4 + lsr r8, r8, r10 + brne .L_found + + /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */ + add r9, r10 + sub r9, 32 + retle r11 + + /* Main loop. offset must be word-aligned */ +1: ld.w r8, r12[0] + com r8 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + + /* Common return path for when a bit is actually found. */ +.L_found: + brev r8 + clz r10, r8 + rsub r9, r11 + add r10, r9 + + /* XXX: If we don't have to return exactly "size" when the bit + is not found, we may drop this "min" thing */ + min r12, r11, r10 + retal r12 + + /* + * unsigned long find_first_bit(const unsigned long *addr, + * unsigned long size) + */ +ENTRY(find_first_bit) + cp.w r11, 0 + reteq r11 + mov r9, r11 +1: ld.w r8, r12[0] + cp.w r8, 0 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + + /* + * unsigned long find_next_bit(const unsigned long *addr, + * unsigned long size, + * unsigned long offset) + */ +ENTRY(find_next_bit) + lsr r8, r10, 5 + sub r9, r11, r10 + retle r11 + + lsl r8, 2 + add r12, r8 + andl r10, 31, COH + breq 1f + + /* offset is not word-aligned. Handle the first (32 - r10) bits */ + ld.w r8, r12[0] + sub r12, -4 + lsr r8, r8, r10 + brne .L_found + + /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */ + add r9, r10 + sub r9, 32 + retle r11 + + /* Main loop. offset must be word-aligned */ +1: ld.w r8, r12[0] + cp.w r8, 0 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + +ENTRY(generic_find_next_zero_le_bit) + lsr r8, r10, 5 + sub r9, r11, r10 + retle r11 + + lsl r8, 2 + add r12, r8 + andl r10, 31, COH + breq 1f + + /* offset is not word-aligned. Handle the first (32 - r10) bits */ + ldswp.w r8, r12[0] + sub r12, -4 + lsr r8, r8, r10 + brne .L_found + + /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */ + add r9, r10 + sub r9, 32 + retle r11 + + /* Main loop. offset must be word-aligned */ +1: ldswp.w r8, r12[0] + cp.w r8, 0 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 diff --git a/arch/avr32/lib/io-readsl.S b/arch/avr32/lib/io-readsl.S new file mode 100644 index 00000000000..b103511ed6c --- /dev/null +++ b/arch/avr32/lib/io-readsl.S @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .global __raw_readsl + .type __raw_readsl,@function +__raw_readsl: + cp.w r10, 0 + reteq r12 + + /* + * If r11 isn't properly aligned, we might get an exception on + * some implementations. But there's not much we can do about it. + */ +1: ld.w r8, r12[0] + sub r10, 1 + st.w r11++, r8 + brne 1b + + retal r12 diff --git a/arch/avr32/lib/io-readsw.S b/arch/avr32/lib/io-readsw.S new file mode 100644 index 00000000000..456be990902 --- /dev/null +++ b/arch/avr32/lib/io-readsw.S @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +.Lnot_word_aligned: + /* + * Bad alignment will cause a hardware exception, which is as + * good as anything. No need for us to check for proper alignment. + */ + ld.uh r8, r12[0] + sub r10, 1 + st.h r11++, r8 + + /* fall through */ + + .global __raw_readsw + .type __raw_readsw,@function +__raw_readsw: + cp.w r10, 0 + reteq r12 + mov r9, 3 + tst r11, r9 + brne .Lnot_word_aligned + + sub r10, 2 + brlt 2f + +1: ldins.h r8:t, r12[0] + ldins.h r8:b, r12[0] + st.w r11++, r8 + sub r10, 2 + brge 1b + +2: sub r10, -2 + reteq r12 + + ld.uh r8, r12[0] + st.h r11++, r8 + retal r12 diff --git a/arch/avr32/lib/io-writesl.S b/arch/avr32/lib/io-writesl.S new file mode 100644 index 00000000000..22138b3a16e --- /dev/null +++ b/arch/avr32/lib/io-writesl.S @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .global __raw_writesl + .type __raw_writesl,@function +__raw_writesl: + cp.w r10, 0 + reteq r12 + +1: ld.w r8, r11++ + sub r10, 1 + st.w r12[0], r8 + brne 1b + + retal r12 diff --git a/arch/avr32/lib/io-writesw.S b/arch/avr32/lib/io-writesw.S new file mode 100644 index 00000000000..8c4a53f1c52 --- /dev/null +++ b/arch/avr32/lib/io-writesw.S @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +.Lnot_word_aligned: + ld.uh r8, r11++ + sub r10, 1 + st.h r12[0], r8 + + .global __raw_writesw + .type __raw_writesw,@function +__raw_writesw: + cp.w r10, 0 + mov r9, 3 + reteq r12 + tst r11, r9 + brne .Lnot_word_aligned + + sub r10, 2 + brlt 2f + +1: ld.w r8, r11++ + bfextu r9, r8, 16, 16 + st.h r12[0], r9 + st.h r12[0], r8 + sub r10, 2 + brge 1b + +2: sub r10, -2 + reteq r12 + + ld.uh r8, r11++ + st.h r12[0], r8 + retal r12 diff --git a/arch/avr32/lib/libgcc.h b/arch/avr32/lib/libgcc.h new file mode 100644 index 00000000000..5a091b5e361 --- /dev/null +++ b/arch/avr32/lib/libgcc.h @@ -0,0 +1,33 @@ +/* Definitions for various functions 'borrowed' from gcc-3.4.3 */ + +#define BITS_PER_UNIT 8 + +typedef int QItype __attribute__ ((mode (QI))); +typedef unsigned int UQItype __attribute__ ((mode (QI))); +typedef int HItype __attribute__ ((mode (HI))); +typedef unsigned int UHItype __attribute__ ((mode (HI))); +typedef int SItype __attribute__ ((mode (SI))); +typedef unsigned int USItype __attribute__ ((mode (SI))); +typedef int DItype __attribute__ ((mode (DI))); +typedef unsigned int UDItype __attribute__ ((mode (DI))); +typedef float SFtype __attribute__ ((mode (SF))); +typedef float DFtype __attribute__ ((mode (DF))); +typedef int word_type __attribute__ ((mode (__word__))); + +#define W_TYPE_SIZE (4 * BITS_PER_UNIT) +#define Wtype SItype +#define UWtype USItype +#define HWtype SItype +#define UHWtype USItype +#define DWtype DItype +#define UDWtype UDItype +#define __NW(a,b) __ ## a ## si ## b +#define __NDW(a,b) __ ## a ## di ## b + +struct DWstruct {Wtype high, low;}; + +typedef union +{ + struct DWstruct s; + DWtype ll; +} DWunion; diff --git a/arch/avr32/lib/longlong.h b/arch/avr32/lib/longlong.h new file mode 100644 index 00000000000..cd5e369ac43 --- /dev/null +++ b/arch/avr32/lib/longlong.h @@ -0,0 +1,98 @@ +/* longlong.h -- definitions for mixed size 32/64 bit arithmetic. + Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000 + Free Software Foundation, Inc. + + This definition file is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2, or (at your option) any later version. + + This definition file is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* Borrowed from gcc-3.4.3 */ + +#define __BITS4 (W_TYPE_SIZE / 4) +#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) + +#define count_leading_zeros(count, x) ((count) = __builtin_clz(x)) + +#define __udiv_qrnnd_c(q, r, n1, n0, d) \ + do { \ + UWtype __d1, __d0, __q1, __q0; \ + UWtype __r1, __r0, __m; \ + __d1 = __ll_highpart (d); \ + __d0 = __ll_lowpart (d); \ + \ + __r1 = (n1) % __d1; \ + __q1 = (n1) / __d1; \ + __m = (UWtype) __q1 * __d0; \ + __r1 = __r1 * __ll_B | __ll_highpart (n0); \ + if (__r1 < __m) \ + { \ + __q1--, __r1 += (d); \ + if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ + if (__r1 < __m) \ + __q1--, __r1 += (d); \ + } \ + __r1 -= __m; \ + \ + __r0 = __r1 % __d1; \ + __q0 = __r1 / __d1; \ + __m = (UWtype) __q0 * __d0; \ + __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ + if (__r0 < __m) \ + { \ + __q0--, __r0 += (d); \ + if (__r0 >= (d)) \ + if (__r0 < __m) \ + __q0--, __r0 += (d); \ + } \ + __r0 -= __m; \ + \ + (q) = (UWtype) __q1 * __ll_B | __q0; \ + (r) = __r0; \ + } while (0) + +#define udiv_qrnnd __udiv_qrnnd_c + +#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ + do { \ + UWtype __x; \ + __x = (al) - (bl); \ + (sh) = (ah) - (bh) - (__x > (al)); \ + (sl) = __x; \ + } while (0) + +#define umul_ppmm(w1, w0, u, v) \ + do { \ + UWtype __x0, __x1, __x2, __x3; \ + UHWtype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (UWtype) __ul * __vl; \ + __x1 = (UWtype) __ul * __vh; \ + __x2 = (UWtype) __uh * __vl; \ + __x3 = (UWtype) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ + } while (0) diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S new file mode 100644 index 00000000000..0abb26142b6 --- /dev/null +++ b/arch/avr32/lib/memcpy.S @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + /* + * void *memcpy(void *to, const void *from, unsigned long n) + * + * This implementation does word-aligned loads in the main loop, + * possibly sacrificing alignment of stores. + * + * Hopefully, in most cases, both "to" and "from" will be + * word-aligned to begin with. + */ + .text + .global memcpy + .type memcpy, @function +memcpy: + mov r9, r11 + andl r9, 3, COH + brne 1f + + /* At this point, "from" is word-aligned */ +2: sub r10, 4 + mov r9, r12 + brlt 4f + +3: ld.w r8, r11++ + sub r10, 4 + st.w r12++, r8 + brge 3b + +4: neg r10 + reteq r9 + + /* Handle unaligned count */ + lsl r10, 2 + add pc, pc, r10 + ld.ub r8, r11++ + st.b r12++, r8 + ld.ub r8, r11++ + st.b r12++, r8 + ld.ub r8, r11++ + st.b r12++, r8 + retal r9 + + /* Handle unaligned "from" pointer */ +1: sub r10, 4 + brlt 4b + add r10, r9 + lsl r9, 2 + add pc, pc, r9 + ld.ub r8, r11++ + st.b r12++, r8 + ld.ub r8, r11++ + st.b r12++, r8 + ld.ub r8, r11++ + st.b r12++, r8 + rjmp 2b diff --git a/arch/avr32/lib/memset.S b/arch/avr32/lib/memset.S new file mode 100644 index 00000000000..40da32c0480 --- /dev/null +++ b/arch/avr32/lib/memset.S @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on linux/arch/arm/lib/memset.S + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ASM optimised string functions + */ +#include <asm/asm.h> + + /* + * r12: void *b + * r11: int c + * r10: size_t len + * + * Returns b in r12 + */ + .text + .global memset + .type memset, @function + .align 5 +memset: + mov r9, r12 + mov r8, r12 + or r11, r11, r11 << 8 + andl r9, 3, COH + brne 1f + +2: or r11, r11, r11 << 16 + sub r10, 4 + brlt 5f + + /* Let's do some real work */ +4: st.w r8++, r11 + sub r10, 4 + brge 4b + + /* + * When we get here, we've got less than 4 bytes to set. r10 + * might be negative. + */ +5: sub r10, -4 + reteq r12 + + /* Fastpath ends here, exactly 32 bytes from memset */ + + /* Handle unaligned count or pointer */ + bld r10, 1 + brcc 6f + st.b r8++, r11 + st.b r8++, r11 + bld r10, 0 + retcc r12 +6: st.b r8++, r11 + retal r12 + + /* Handle unaligned pointer */ +1: sub r10, 4 + brlt 5b + add r10, r9 + lsl r9, 1 + add pc, r9 + st.b r8++, r11 + st.b r8++, r11 + st.b r8++, r11 + rjmp 2b + + .size memset, . - memset diff --git a/arch/avr32/lib/strncpy_from_user.S b/arch/avr32/lib/strncpy_from_user.S new file mode 100644 index 00000000000..72bd50599ec --- /dev/null +++ b/arch/avr32/lib/strncpy_from_user.S @@ -0,0 +1,60 @@ +/* + * Copy to/from userspace with optional address space checking. + * + * Copyright 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/errno.h> + +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/asm.h> + + /* + * long strncpy_from_user(char *dst, const char *src, long count) + * + * On success, returns the length of the string, not including + * the terminating NUL. + * + * If the string is longer than count, returns count + * + * If userspace access fails, returns -EFAULT + */ + .text + .align 1 + .global strncpy_from_user + .type strncpy_from_user, "function" +strncpy_from_user: + mov r9, -EFAULT + branch_if_kernel r8, __strncpy_from_user + ret_if_privileged r8, r11, r10, r9 + + .global __strncpy_from_user + .type __strncpy_from_user, "function" +__strncpy_from_user: + cp.w r10, 0 + reteq 0 + + mov r9, r10 + +1: ld.ub r8, r11++ + st.b r12++, r8 + cp.w r8, 0 + breq 2f + sub r9, 1 + brne 1b + +2: sub r10, r9 + retal r10 + + .section .fixup, "ax" + .align 1 +3: mov r12, -EFAULT + retal r12 + + .section __ex_table, "a" + .align 2 + .long 1b, 3b diff --git a/arch/avr32/lib/strnlen_user.S b/arch/avr32/lib/strnlen_user.S new file mode 100644 index 00000000000..65ce11afa66 --- /dev/null +++ b/arch/avr32/lib/strnlen_user.S @@ -0,0 +1,67 @@ +/* + * Copy to/from userspace with optional address space checking. + * + * Copyright 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/processor.h> +#include <asm/asm.h> + + .text + .align 1 + .global strnlen_user + .type strnlen_user, "function" +strnlen_user: + branch_if_kernel r8, __strnlen_user + sub r8, r11, 1 + add r8, r12 + retcs 0 + brmi adjust_length /* do a closer inspection */ + + .global __strnlen_user + .type __strnlen_user, "function" +__strnlen_user: + mov r10, r12 + +10: ld.ub r8, r12++ + cp.w r8, 0 + breq 2f + sub r11, 1 + brne 10b + + sub r12, -1 +2: sub r12, r10 + retal r12 + + + .type adjust_length, "function" +adjust_length: + cp.w r12, 0 /* addr must always be < TASK_SIZE */ + retmi 0 + + pushm lr + lddpc lr, _task_size + sub r11, lr, r12 + mov r9, r11 + rcall __strnlen_user + cp.w r12, r9 + brgt 1f + popm pc +1: popm pc, r12=0 + + .align 2 +_task_size: + .long TASK_SIZE + + .section .fixup, "ax" + .align 1 +19: retal 0 + + .section __ex_table, "a" + .align 2 + .long 10b, 19b diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile new file mode 100644 index 00000000000..f62eb691551 --- /dev/null +++ b/arch/avr32/mach-at32ap/Makefile @@ -0,0 +1,2 @@ +obj-y += at32ap.o clock.o pio.o intc.o extint.o hsmc.o +obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c new file mode 100644 index 00000000000..f7cedf5aabe --- /dev/null +++ b/arch/avr32/mach-at32ap/at32ap.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include <asm/arch/init.h> +#include <asm/arch/sm.h> + +struct at32_sm system_manager; + +static int __init at32_sm_init(void) +{ + struct resource *regs; + struct at32_sm *sm = &system_manager; + int ret = -ENXIO; + + regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0); + if (!regs) + goto fail; + + spin_lock_init(&sm->lock); + sm->pdev = &at32_sm_device; + + ret = -ENOMEM; + sm->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!sm->regs) + goto fail; + + return 0; + +fail: + printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret); + return ret; +} + +void __init setup_platform(void) +{ + at32_sm_init(); + at32_clock_init(); + at32_portmux_init(); + + /* FIXME: This doesn't belong here */ + at32_setup_serial_console(1); +} + +static int __init pdc_probe(struct platform_device *pdev) +{ + struct clk *pclk, *hclk; + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) { + dev_err(&pdev->dev, "no pclk defined\n"); + return PTR_ERR(pclk); + } + hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "no hclk defined\n"); + clk_put(pclk); + return PTR_ERR(hclk); + } + + clk_enable(pclk); + clk_enable(hclk); + + dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n"); + return 0; +} + +static struct platform_driver pdc_driver = { + .probe = pdc_probe, + .driver = { + .name = "pdc", + }, +}; + +static int __init pdc_init(void) +{ + return platform_driver_register(&pdc_driver); +} +arch_initcall(pdc_init); diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c new file mode 100644 index 00000000000..37982b60398 --- /dev/null +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -0,0 +1,876 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include <asm/arch/board.h> +#include <asm/arch/portmux.h> +#include <asm/arch/sm.h> + +#include "clock.h" +#include "pio.h" +#include "sm.h" + +#define PBMEM(base) \ + { \ + .start = base, \ + .end = base + 0x3ff, \ + .flags = IORESOURCE_MEM, \ + } +#define IRQ(num) \ + { \ + .start = num, \ + .end = num, \ + .flags = IORESOURCE_IRQ, \ + } +#define NAMED_IRQ(num, _name) \ + { \ + .start = num, \ + .end = num, \ + .name = _name, \ + .flags = IORESOURCE_IRQ, \ + } + +#define DEFINE_DEV(_name, _id) \ +static struct platform_device _name##_id##_device = { \ + .name = #_name, \ + .id = _id, \ + .resource = _name##_id##_resource, \ + .num_resources = ARRAY_SIZE(_name##_id##_resource), \ +} +#define DEFINE_DEV_DATA(_name, _id) \ +static struct platform_device _name##_id##_device = { \ + .name = #_name, \ + .id = _id, \ + .dev = { \ + .platform_data = &_name##_id##_data, \ + }, \ + .resource = _name##_id##_resource, \ + .num_resources = ARRAY_SIZE(_name##_id##_resource), \ +} + +#define DEV_CLK(_name, devname, bus, _index) \ +static struct clk devname##_##_name = { \ + .name = #_name, \ + .dev = &devname##_device.dev, \ + .parent = &bus##_clk, \ + .mode = bus##_clk_mode, \ + .get_rate = bus##_clk_get_rate, \ + .index = _index, \ +} + +enum { + PIOA, + PIOB, + PIOC, + PIOD, +}; + +enum { + FUNC_A, + FUNC_B, +}; + +unsigned long at32ap7000_osc_rates[3] = { + [0] = 32768, + /* FIXME: these are ATSTK1002-specific */ + [1] = 20000000, + [2] = 12000000, +}; + +static unsigned long osc_get_rate(struct clk *clk) +{ + return at32ap7000_osc_rates[clk->index]; +} + +static unsigned long pll_get_rate(struct clk *clk, unsigned long control) +{ + unsigned long div, mul, rate; + + if (!(control & SM_BIT(PLLEN))) + return 0; + + div = SM_BFEXT(PLLDIV, control) + 1; + mul = SM_BFEXT(PLLMUL, control) + 1; + + rate = clk->parent->get_rate(clk->parent); + rate = (rate + div / 2) / div; + rate *= mul; + + return rate; +} + +static unsigned long pll0_get_rate(struct clk *clk) +{ + u32 control; + + control = sm_readl(&system_manager, PM_PLL0); + + return pll_get_rate(clk, control); +} + +static unsigned long pll1_get_rate(struct clk *clk) +{ + u32 control; + + control = sm_readl(&system_manager, PM_PLL1); + + return pll_get_rate(clk, control); +} + +/* + * The AT32AP7000 has five primary clock sources: One 32kHz + * oscillator, two crystal oscillators and two PLLs. + */ +static struct clk osc32k = { + .name = "osc32k", + .get_rate = osc_get_rate, + .users = 1, + .index = 0, +}; +static struct clk osc0 = { + .name = "osc0", + .get_rate = osc_get_rate, + .users = 1, + .index = 1, +}; +static struct clk osc1 = { + .name = "osc1", + .get_rate = osc_get_rate, + .index = 2, +}; +static struct clk pll0 = { + .name = "pll0", + .get_rate = pll0_get_rate, + .parent = &osc0, +}; +static struct clk pll1 = { + .name = "pll1", + .get_rate = pll1_get_rate, + .parent = &osc0, +}; + +/* + * The main clock can be either osc0 or pll0. The boot loader may + * have chosen one for us, so we don't really know which one until we + * have a look at the SM. + */ +static struct clk *main_clock; + +/* + * Synchronous clocks are generated from the main clock. The clocks + * must satisfy the constraint + * fCPU >= fHSB >= fPB + * i.e. each clock must not be faster than its parent. + */ +static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift) +{ + return main_clock->get_rate(main_clock) >> shift; +}; + +static void cpu_clk_mode(struct clk *clk, int enabled) +{ + struct at32_sm *sm = &system_manager; + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&sm->lock, flags); + mask = sm_readl(sm, PM_CPU_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + sm_writel(sm, PM_CPU_MASK, mask); + spin_unlock_irqrestore(&sm->lock, flags); +} + +static unsigned long cpu_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = sm_readl(&system_manager, PM_CKSEL); + if (cksel & SM_BIT(CPUDIV)) + shift = SM_BFEXT(CPUSEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static void hsb_clk_mode(struct clk *clk, int enabled) +{ + struct at32_sm *sm = &system_manager; + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&sm->lock, flags); + mask = sm_readl(sm, PM_HSB_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + sm_writel(sm, PM_HSB_MASK, mask); + spin_unlock_irqrestore(&sm->lock, flags); +} + +static unsigned long hsb_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = sm_readl(&system_manager, PM_CKSEL); + if (cksel & SM_BIT(HSBDIV)) + shift = SM_BFEXT(HSBSEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static void pba_clk_mode(struct clk *clk, int enabled) +{ + struct at32_sm *sm = &system_manager; + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&sm->lock, flags); + mask = sm_readl(sm, PM_PBA_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + sm_writel(sm, PM_PBA_MASK, mask); + spin_unlock_irqrestore(&sm->lock, flags); +} + +static unsigned long pba_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = sm_readl(&system_manager, PM_CKSEL); + if (cksel & SM_BIT(PBADIV)) + shift = SM_BFEXT(PBASEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static void pbb_clk_mode(struct clk *clk, int enabled) +{ + struct at32_sm *sm = &system_manager; + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&sm->lock, flags); + mask = sm_readl(sm, PM_PBB_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + sm_writel(sm, PM_PBB_MASK, mask); + spin_unlock_irqrestore(&sm->lock, flags); +} + +static unsigned long pbb_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = sm_readl(&system_manager, PM_CKSEL); + if (cksel & SM_BIT(PBBDIV)) + shift = SM_BFEXT(PBBSEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static struct clk cpu_clk = { + .name = "cpu", + .get_rate = cpu_clk_get_rate, + .users = 1, +}; +static struct clk hsb_clk = { + .name = "hsb", + .parent = &cpu_clk, + .get_rate = hsb_clk_get_rate, +}; +static struct clk pba_clk = { + .name = "pba", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 1, +}; +static struct clk pbb_clk = { + .name = "pbb", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = pbb_clk_get_rate, + .users = 1, + .index = 2, +}; + +/* -------------------------------------------------------------------- + * Generic Clock operations + * -------------------------------------------------------------------- */ + +static void genclk_mode(struct clk *clk, int enabled) +{ + u32 control; + + BUG_ON(clk->index > 7); + + control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); + if (enabled) + control |= SM_BIT(CEN); + else + control &= ~SM_BIT(CEN); + sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control); +} + +static unsigned long genclk_get_rate(struct clk *clk) +{ + u32 control; + unsigned long div = 1; + + BUG_ON(clk->index > 7); + + if (!clk->parent) + return 0; + + control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); + if (control & SM_BIT(DIVEN)) + div = 2 * (SM_BFEXT(DIV, control) + 1); + + return clk->parent->get_rate(clk->parent) / div; +} + +static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) +{ + u32 control; + unsigned long parent_rate, actual_rate, div; + + BUG_ON(clk->index > 7); + + if (!clk->parent) + return 0; + + parent_rate = clk->parent->get_rate(clk->parent); + control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); + + if (rate > 3 * parent_rate / 4) { + actual_rate = parent_rate; + control &= ~SM_BIT(DIVEN); + } else { + div = (parent_rate + rate) / (2 * rate) - 1; + control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN); + actual_rate = parent_rate / (2 * (div + 1)); + } + + printk("clk %s: new rate %lu (actual rate %lu)\n", + clk->name, rate, actual_rate); + + if (apply) + sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, + control); + + return actual_rate; +} + +int genclk_set_parent(struct clk *clk, struct clk *parent) +{ + u32 control; + + BUG_ON(clk->index > 7); + + printk("clk %s: new parent %s (was %s)\n", + clk->name, parent->name, + clk->parent ? clk->parent->name : "(null)"); + + control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); + + if (parent == &osc1 || parent == &pll1) + control |= SM_BIT(OSCSEL); + else if (parent == &osc0 || parent == &pll0) + control &= ~SM_BIT(OSCSEL); + else + return -EINVAL; + + if (parent == &pll0 || parent == &pll1) + control |= SM_BIT(PLLSEL); + else + control &= ~SM_BIT(PLLSEL); + + sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control); + clk->parent = parent; + + return 0; +} + +/* -------------------------------------------------------------------- + * System peripherals + * -------------------------------------------------------------------- */ +static struct resource sm_resource[] = { + PBMEM(0xfff00000), + NAMED_IRQ(19, "eim"), + NAMED_IRQ(20, "pm"), + NAMED_IRQ(21, "rtc"), +}; +struct platform_device at32_sm_device = { + .name = "sm", + .id = 0, + .resource = sm_resource, + .num_resources = ARRAY_SIZE(sm_resource), +}; +DEV_CLK(pclk, at32_sm, pbb, 0); + +static struct resource intc0_resource[] = { + PBMEM(0xfff00400), +}; +struct platform_device at32_intc0_device = { + .name = "intc", + .id = 0, + .resource = intc0_resource, + .num_resources = ARRAY_SIZE(intc0_resource), +}; +DEV_CLK(pclk, at32_intc0, pbb, 1); + +static struct clk ebi_clk = { + .name = "ebi", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = hsb_clk_get_rate, + .users = 1, +}; +static struct clk hramc_clk = { + .name = "hramc", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = hsb_clk_get_rate, + .users = 1, +}; + +static struct resource smc0_resource[] = { + PBMEM(0xfff03400), +}; +DEFINE_DEV(smc, 0); +DEV_CLK(pclk, smc0, pbb, 13); +DEV_CLK(mck, smc0, hsb, 0); + +static struct platform_device pdc_device = { + .name = "pdc", + .id = 0, +}; +DEV_CLK(hclk, pdc, hsb, 4); +DEV_CLK(pclk, pdc, pba, 16); + +static struct clk pico_clk = { + .name = "pico", + .parent = &cpu_clk, + .mode = cpu_clk_mode, + .get_rate = cpu_clk_get_rate, + .users = 1, +}; + +/* -------------------------------------------------------------------- + * PIO + * -------------------------------------------------------------------- */ + +static struct resource pio0_resource[] = { + PBMEM(0xffe02800), + IRQ(13), +}; +DEFINE_DEV(pio, 0); +DEV_CLK(mck, pio0, pba, 10); + +static struct resource pio1_resource[] = { + PBMEM(0xffe02c00), + IRQ(14), +}; +DEFINE_DEV(pio, 1); +DEV_CLK(mck, pio1, pba, 11); + +static struct resource pio2_resource[] = { + PBMEM(0xffe03000), + IRQ(15), +}; +DEFINE_DEV(pio, 2); +DEV_CLK(mck, pio2, pba, 12); + +static struct resource pio3_resource[] = { + PBMEM(0xffe03400), + IRQ(16), +}; +DEFINE_DEV(pio, 3); +DEV_CLK(mck, pio3, pba, 13); + +void __init at32_add_system_devices(void) +{ + system_manager.eim_first_irq = NR_INTERNAL_IRQS; + + platform_device_register(&at32_sm_device); + platform_device_register(&at32_intc0_device); + platform_device_register(&smc0_device); + platform_device_register(&pdc_device); + + platform_device_register(&pio0_device); + platform_device_register(&pio1_device); + platform_device_register(&pio2_device); + platform_device_register(&pio3_device); +} + +/* -------------------------------------------------------------------- + * USART + * -------------------------------------------------------------------- */ + +static struct resource usart0_resource[] = { + PBMEM(0xffe00c00), + IRQ(7), +}; +DEFINE_DEV(usart, 0); +DEV_CLK(usart, usart0, pba, 4); + +static struct resource usart1_resource[] = { + PBMEM(0xffe01000), + IRQ(7), +}; +DEFINE_DEV(usart, 1); +DEV_CLK(usart, usart1, pba, 4); + +static struct resource usart2_resource[] = { + PBMEM(0xffe01400), + IRQ(8), +}; +DEFINE_DEV(usart, 2); +DEV_CLK(usart, usart2, pba, 5); + +static struct resource usart3_resource[] = { + PBMEM(0xffe01800), + IRQ(9), +}; +DEFINE_DEV(usart, 3); +DEV_CLK(usart, usart3, pba, 6); + +static inline void configure_usart0_pins(void) +{ + portmux_set_func(PIOA, 8, FUNC_B); /* RXD */ + portmux_set_func(PIOA, 9, FUNC_B); /* TXD */ +} + +static inline void configure_usart1_pins(void) +{ + portmux_set_func(PIOA, 17, FUNC_A); /* RXD */ + portmux_set_func(PIOA, 18, FUNC_A); /* TXD */ +} + +static inline void configure_usart2_pins(void) +{ + portmux_set_func(PIOB, 26, FUNC_B); /* RXD */ + portmux_set_func(PIOB, 27, FUNC_B); /* TXD */ +} + +static inline void configure_usart3_pins(void) +{ + portmux_set_func(PIOB, 18, FUNC_B); /* RXD */ + portmux_set_func(PIOB, 17, FUNC_B); /* TXD */ +} + +static struct platform_device *setup_usart(unsigned int id) +{ + struct platform_device *pdev; + + switch (id) { + case 0: + pdev = &usart0_device; + configure_usart0_pins(); + break; + case 1: + pdev = &usart1_device; + configure_usart1_pins(); + break; + case 2: + pdev = &usart2_device; + configure_usart2_pins(); + break; + case 3: + pdev = &usart3_device; + configure_usart3_pins(); + break; + default: + pdev = NULL; + break; + } + + return pdev; +} + +struct platform_device *__init at32_add_device_usart(unsigned int id) +{ + struct platform_device *pdev; + + pdev = setup_usart(id); + if (pdev) + platform_device_register(pdev); + + return pdev; +} + +struct platform_device *at91_default_console_device; + +void __init at32_setup_serial_console(unsigned int usart_id) +{ + at91_default_console_device = setup_usart(usart_id); +} + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +static struct eth_platform_data macb0_data; +static struct resource macb0_resource[] = { + PBMEM(0xfff01800), + IRQ(25), +}; +DEFINE_DEV_DATA(macb, 0); +DEV_CLK(hclk, macb0, hsb, 8); +DEV_CLK(pclk, macb0, pbb, 6); + +struct platform_device *__init +at32_add_device_eth(unsigned int id, struct eth_platform_data *data) +{ + struct platform_device *pdev; + + switch (id) { + case 0: + pdev = &macb0_device; + + portmux_set_func(PIOC, 3, FUNC_A); /* TXD0 */ + portmux_set_func(PIOC, 4, FUNC_A); /* TXD1 */ + portmux_set_func(PIOC, 7, FUNC_A); /* TXEN */ + portmux_set_func(PIOC, 8, FUNC_A); /* TXCK */ + portmux_set_func(PIOC, 9, FUNC_A); /* RXD0 */ + portmux_set_func(PIOC, 10, FUNC_A); /* RXD1 */ + portmux_set_func(PIOC, 13, FUNC_A); /* RXER */ + portmux_set_func(PIOC, 15, FUNC_A); /* RXDV */ + portmux_set_func(PIOC, 16, FUNC_A); /* MDC */ + portmux_set_func(PIOC, 17, FUNC_A); /* MDIO */ + + if (!data->is_rmii) { + portmux_set_func(PIOC, 0, FUNC_A); /* COL */ + portmux_set_func(PIOC, 1, FUNC_A); /* CRS */ + portmux_set_func(PIOC, 2, FUNC_A); /* TXER */ + portmux_set_func(PIOC, 5, FUNC_A); /* TXD2 */ + portmux_set_func(PIOC, 6, FUNC_A); /* TXD3 */ + portmux_set_func(PIOC, 11, FUNC_A); /* RXD2 */ + portmux_set_func(PIOC, 12, FUNC_A); /* RXD3 */ + portmux_set_func(PIOC, 14, FUNC_A); /* RXCK */ + portmux_set_func(PIOC, 18, FUNC_A); /* SPD */ + } + break; + + default: + return NULL; + } + + memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data)); + platform_device_register(pdev); + + return pdev; +} + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ +static struct resource spi0_resource[] = { + PBMEM(0xffe00000), + IRQ(3), +}; +DEFINE_DEV(spi, 0); +DEV_CLK(mck, spi0, pba, 0); + +struct platform_device *__init at32_add_device_spi(unsigned int id) +{ + struct platform_device *pdev; + + switch (id) { + case 0: + pdev = &spi0_device; + portmux_set_func(PIOA, 0, FUNC_A); /* MISO */ + portmux_set_func(PIOA, 1, FUNC_A); /* MOSI */ + portmux_set_func(PIOA, 2, FUNC_A); /* SCK */ + portmux_set_func(PIOA, 3, FUNC_A); /* NPCS0 */ + portmux_set_func(PIOA, 4, FUNC_A); /* NPCS1 */ + portmux_set_func(PIOA, 5, FUNC_A); /* NPCS2 */ + break; + + default: + return NULL; + } + + platform_device_register(pdev); + return pdev; +} + +/* -------------------------------------------------------------------- + * LCDC + * -------------------------------------------------------------------- */ +static struct lcdc_platform_data lcdc0_data; +static struct resource lcdc0_resource[] = { + { + .start = 0xff000000, + .end = 0xff000fff, + .flags = IORESOURCE_MEM, + }, + IRQ(1), +}; +DEFINE_DEV_DATA(lcdc, 0); +DEV_CLK(hclk, lcdc0, hsb, 7); +static struct clk lcdc0_pixclk = { + .name = "pixclk", + .dev = &lcdc0_device.dev, + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 7, +}; + +struct platform_device *__init +at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) +{ + struct platform_device *pdev; + + switch (id) { + case 0: + pdev = &lcdc0_device; + portmux_set_func(PIOC, 19, FUNC_A); /* CC */ + portmux_set_func(PIOC, 20, FUNC_A); /* HSYNC */ + portmux_set_func(PIOC, 21, FUNC_A); /* PCLK */ + portmux_set_func(PIOC, 22, FUNC_A); /* VSYNC */ + portmux_set_func(PIOC, 23, FUNC_A); /* DVAL */ + portmux_set_func(PIOC, 24, FUNC_A); /* MODE */ + portmux_set_func(PIOC, 25, FUNC_A); /* PWR */ + portmux_set_func(PIOC, 26, FUNC_A); /* DATA0 */ + portmux_set_func(PIOC, 27, FUNC_A); /* DATA1 */ + portmux_set_func(PIOC, 28, FUNC_A); /* DATA2 */ + portmux_set_func(PIOC, 29, FUNC_A); /* DATA3 */ + portmux_set_func(PIOC, 30, FUNC_A); /* DATA4 */ + portmux_set_func(PIOC, 31, FUNC_A); /* DATA5 */ + portmux_set_func(PIOD, 0, FUNC_A); /* DATA6 */ + portmux_set_func(PIOD, 1, FUNC_A); /* DATA7 */ + portmux_set_func(PIOD, 2, FUNC_A); /* DATA8 */ + portmux_set_func(PIOD, 3, FUNC_A); /* DATA9 */ + portmux_set_func(PIOD, 4, FUNC_A); /* DATA10 */ + portmux_set_func(PIOD, 5, FUNC_A); /* DATA11 */ + portmux_set_func(PIOD, 6, FUNC_A); /* DATA12 */ + portmux_set_func(PIOD, 7, FUNC_A); /* DATA13 */ + portmux_set_func(PIOD, 8, FUNC_A); /* DATA14 */ + portmux_set_func(PIOD, 9, FUNC_A); /* DATA15 */ + portmux_set_func(PIOD, 10, FUNC_A); /* DATA16 */ + portmux_set_func(PIOD, 11, FUNC_A); /* DATA17 */ + portmux_set_func(PIOD, 12, FUNC_A); /* DATA18 */ + portmux_set_func(PIOD, 13, FUNC_A); /* DATA19 */ + portmux_set_func(PIOD, 14, FUNC_A); /* DATA20 */ + portmux_set_func(PIOD, 15, FUNC_A); /* DATA21 */ + portmux_set_func(PIOD, 16, FUNC_A); /* DATA22 */ + portmux_set_func(PIOD, 17, FUNC_A); /* DATA23 */ + + clk_set_parent(&lcdc0_pixclk, &pll0); + clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0)); + break; + + default: + return NULL; + } + + memcpy(pdev->dev.platform_data, data, + sizeof(struct lcdc_platform_data)); + + platform_device_register(pdev); + return pdev; +} + +struct clk *at32_clock_list[] = { + &osc32k, + &osc0, + &osc1, + &pll0, + &pll1, + &cpu_clk, + &hsb_clk, + &pba_clk, + &pbb_clk, + &at32_sm_pclk, + &at32_intc0_pclk, + &ebi_clk, + &hramc_clk, + &smc0_pclk, + &smc0_mck, + &pdc_hclk, + &pdc_pclk, + &pico_clk, + &pio0_mck, + &pio1_mck, + &pio2_mck, + &pio3_mck, + &usart0_usart, + &usart1_usart, + &usart2_usart, + &usart3_usart, + &macb0_hclk, + &macb0_pclk, + &spi0_mck, + &lcdc0_hclk, + &lcdc0_pixclk, +}; +unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); + +void __init at32_portmux_init(void) +{ + at32_init_pio(&pio0_device); + at32_init_pio(&pio1_device); + at32_init_pio(&pio2_device); + at32_init_pio(&pio3_device); +} + +void __init at32_clock_init(void) +{ + struct at32_sm *sm = &system_manager; + u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; + int i; + + if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL)) + main_clock = &pll0; + else + main_clock = &osc0; + + if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC)) + pll0.parent = &osc1; + if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC)) + pll1.parent = &osc1; + + /* + * Turn on all clocks that have at least one user already, and + * turn off everything else. We only do this for module + * clocks, and even though it isn't particularly pretty to + * check the address of the mode function, it should do the + * trick... + */ + for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) { + struct clk *clk = at32_clock_list[i]; + + if (clk->mode == &cpu_clk_mode) + cpu_mask |= 1 << clk->index; + else if (clk->mode == &hsb_clk_mode) + hsb_mask |= 1 << clk->index; + else if (clk->mode == &pba_clk_mode) + pba_mask |= 1 << clk->index; + else if (clk->mode == &pbb_clk_mode) + pbb_mask |= 1 << clk->index; + } + + sm_writel(sm, PM_CPU_MASK, cpu_mask); + sm_writel(sm, PM_HSB_MASK, hsb_mask); + sm_writel(sm, PM_PBA_MASK, pba_mask); + sm_writel(sm, PM_PBB_MASK, pbb_mask); +} diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c new file mode 100644 index 00000000000..3d0d1097389 --- /dev/null +++ b/arch/avr32/mach-at32ap/clock.c @@ -0,0 +1,148 @@ +/* + * Clock management for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * Based on arch/arm/mach-at91rm9200/clock.c + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/device.h> +#include <linux/string.h> + +#include "clock.h" + +static spinlock_t clk_lock = SPIN_LOCK_UNLOCKED; + +struct clk *clk_get(struct device *dev, const char *id) +{ + int i; + + for (i = 0; i < at32_nr_clocks; i++) { + struct clk *clk = at32_clock_list[i]; + + if (clk->dev == dev && strcmp(id, clk->name) == 0) + return clk; + } + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + /* clocks are static for now, we can't free them */ +} +EXPORT_SYMBOL(clk_put); + +static void __clk_enable(struct clk *clk) +{ + if (clk->parent) + __clk_enable(clk->parent); + if (clk->users++ == 0 && clk->mode) + clk->mode(clk, 1); +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void __clk_disable(struct clk *clk) +{ + BUG_ON(clk->users == 0); + + if (--clk->users == 0 && clk->mode) + clk->mode(clk, 0); + if (clk->parent) + __clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long rate; + + spin_lock_irqsave(&clk_lock, flags); + rate = clk->get_rate(clk); + spin_unlock_irqrestore(&clk_lock, flags); + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags, actual_rate; + + if (!clk->set_rate) + return -ENOSYS; + + spin_lock_irqsave(&clk_lock, flags); + actual_rate = clk->set_rate(clk, rate, 0); + spin_unlock_irqrestore(&clk_lock, flags); + + return actual_rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (!clk->set_rate) + return -ENOSYS; + + spin_lock_irqsave(&clk_lock, flags); + ret = clk->set_rate(clk, rate, 1); + spin_unlock_irqrestore(&clk_lock, flags); + + return (ret < 0) ? ret : 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + int ret; + + if (!clk->set_parent) + return -ENOSYS; + + spin_lock_irqsave(&clk_lock, flags); + ret = clk->set_parent(clk, parent); + spin_unlock_irqrestore(&clk_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h new file mode 100644 index 00000000000..f953f044ba4 --- /dev/null +++ b/arch/avr32/mach-at32ap/clock.h @@ -0,0 +1,30 @@ +/* + * Clock management for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * Based on arch/arm/mach-at91rm9200/clock.c + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> + +struct clk { + const char *name; /* Clock name/function */ + struct device *dev; /* Device the clock is used by */ + struct clk *parent; /* Parent clock, if any */ + void (*mode)(struct clk *clk, int enabled); + unsigned long (*get_rate)(struct clk *clk); + long (*set_rate)(struct clk *clk, unsigned long rate, + int apply); + int (*set_parent)(struct clk *clk, struct clk *parent); + u16 users; /* Enabled if non-zero */ + u16 index; /* Sibling index */ +}; + +extern struct clk *at32_clock_list[]; +extern unsigned int at32_nr_clocks; diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c new file mode 100644 index 00000000000..7da9c5f7a0e --- /dev/null +++ b/arch/avr32/mach-at32ap/extint.c @@ -0,0 +1,171 @@ +/* + * External interrupt handling for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/random.h> + +#include <asm/io.h> + +#include <asm/arch/sm.h> + +#include "sm.h" + +static void eim_ack_irq(unsigned int irq) +{ + struct at32_sm *sm = get_irq_chip_data(irq); + sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq)); +} + +static void eim_mask_irq(unsigned int irq) +{ + struct at32_sm *sm = get_irq_chip_data(irq); + sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq)); +} + +static void eim_mask_ack_irq(unsigned int irq) +{ + struct at32_sm *sm = get_irq_chip_data(irq); + sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq)); + sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq)); +} + +static void eim_unmask_irq(unsigned int irq) +{ + struct at32_sm *sm = get_irq_chip_data(irq); + sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq)); +} + +static int eim_set_irq_type(unsigned int irq, unsigned int flow_type) +{ + struct at32_sm *sm = get_irq_chip_data(irq); + unsigned int i = irq - sm->eim_first_irq; + u32 mode, edge, level; + unsigned long flags; + int ret = 0; + + flow_type &= IRQ_TYPE_SENSE_MASK; + + spin_lock_irqsave(&sm->lock, flags); + + mode = sm_readl(sm, EIM_MODE); + edge = sm_readl(sm, EIM_EDGE); + level = sm_readl(sm, EIM_LEVEL); + + switch (flow_type) { + case IRQ_TYPE_LEVEL_LOW: + mode |= 1 << i; + level &= ~(1 << i); + break; + case IRQ_TYPE_LEVEL_HIGH: + mode |= 1 << i; + level |= 1 << i; + break; + case IRQ_TYPE_EDGE_RISING: + mode &= ~(1 << i); + edge |= 1 << i; + break; + case IRQ_TYPE_EDGE_FALLING: + mode &= ~(1 << i); + edge &= ~(1 << i); + break; + default: + ret = -EINVAL; + break; + } + + sm_writel(sm, EIM_MODE, mode); + sm_writel(sm, EIM_EDGE, edge); + sm_writel(sm, EIM_LEVEL, level); + + spin_unlock_irqrestore(&sm->lock, flags); + + return ret; +} + +struct irq_chip eim_chip = { + .name = "eim", + .ack = eim_ack_irq, + .mask = eim_mask_irq, + .mask_ack = eim_mask_ack_irq, + .unmask = eim_unmask_irq, + .set_type = eim_set_irq_type, +}; + +static void demux_eim_irq(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct at32_sm *sm = desc->handler_data; + struct irq_desc *ext_desc; + unsigned long status, pending; + unsigned int i, ext_irq; + + spin_lock(&sm->lock); + + status = sm_readl(sm, EIM_ISR); + pending = status & sm_readl(sm, EIM_IMR); + + while (pending) { + i = fls(pending) - 1; + pending &= ~(1 << i); + + ext_irq = i + sm->eim_first_irq; + ext_desc = irq_desc + ext_irq; + ext_desc->handle_irq(ext_irq, ext_desc, regs); + } + + spin_unlock(&sm->lock); +} + +static int __init eim_init(void) +{ + struct at32_sm *sm = &system_manager; + unsigned int i; + unsigned int nr_irqs; + unsigned int int_irq; + u32 pattern; + + /* + * The EIM is really the same module as SM, so register + * mapping, etc. has been taken care of already. + */ + + /* + * Find out how many interrupt lines that are actually + * implemented in hardware. + */ + sm_writel(sm, EIM_IDR, ~0UL); + sm_writel(sm, EIM_MODE, ~0UL); + pattern = sm_readl(sm, EIM_MODE); + nr_irqs = fls(pattern); + + sm->eim_chip = &eim_chip; + + for (i = 0; i < nr_irqs; i++) { + set_irq_chip(sm->eim_first_irq + i, &eim_chip); + set_irq_chip_data(sm->eim_first_irq + i, sm); + } + + int_irq = platform_get_irq_byname(sm->pdev, "eim"); + + set_irq_chained_handler(int_irq, demux_eim_irq); + set_irq_data(int_irq, sm); + + printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n", + sm->regs, int_irq); + printk("EIM: Handling %u external IRQs, starting with IRQ %u\n", + nr_irqs, sm->eim_first_irq); + + return 0; +} +arch_initcall(eim_init); diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c new file mode 100644 index 00000000000..7691721928a --- /dev/null +++ b/arch/avr32/mach-at32ap/hsmc.c @@ -0,0 +1,164 @@ +/* + * Static Memory Controller for AT32 chips + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define DEBUG +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include <asm/arch/smc.h> + +#include "hsmc.h" + +#define NR_CHIP_SELECTS 6 + +struct hsmc { + void __iomem *regs; + struct clk *pclk; + struct clk *mck; +}; + +static struct hsmc *hsmc; + +int smc_set_configuration(int cs, const struct smc_config *config) +{ + unsigned long mul; + unsigned long offset; + u32 setup, pulse, cycle, mode; + + if (!hsmc) + return -ENODEV; + if (cs >= NR_CHIP_SELECTS) + return -EINVAL; + + /* + * cycles = x / T = x * f + * = ((x * 1000000000) * ((f * 65536) / 1000000000)) / 65536 + * = ((x * 1000000000) * (((f / 10000) * 65536) / 100000)) / 65536 + */ + mul = (clk_get_rate(hsmc->mck) / 10000) << 16; + mul /= 100000; + +#define ns2cyc(x) ((((x) * mul) + 65535) >> 16) + + setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup)) + | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup)) + | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup)) + | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup))); + pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse)) + | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse)) + | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse)) + | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse))); + cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle)) + | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle))); + + switch (config->bus_width) { + case 1: + mode = HSMC_BF(DBW, HSMC_DBW_8_BITS); + break; + case 2: + mode = HSMC_BF(DBW, HSMC_DBW_16_BITS); + break; + case 4: + mode = HSMC_BF(DBW, HSMC_DBW_32_BITS); + break; + default: + return -EINVAL; + } + + if (config->nrd_controlled) + mode |= HSMC_BIT(READ_MODE); + if (config->nwe_controlled) + mode |= HSMC_BIT(WRITE_MODE); + if (config->byte_write) + mode |= HSMC_BIT(BAT); + + pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n", + cs, setup, pulse, cycle, mode); + + offset = cs * 0x10; + hsmc_writel(hsmc, SETUP0 + offset, setup); + hsmc_writel(hsmc, PULSE0 + offset, pulse); + hsmc_writel(hsmc, CYCLE0 + offset, cycle); + hsmc_writel(hsmc, MODE0 + offset, mode); + hsmc_readl(hsmc, MODE0); /* I/O barrier */ + + return 0; +} +EXPORT_SYMBOL(smc_set_configuration); + +static int hsmc_probe(struct platform_device *pdev) +{ + struct resource *regs; + struct clk *pclk, *mck; + int ret; + + if (hsmc) + return -EBUSY; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + mck = clk_get(&pdev->dev, "mck"); + if (IS_ERR(mck)) { + ret = PTR_ERR(mck); + goto out_put_pclk; + } + + ret = -ENOMEM; + hsmc = kzalloc(sizeof(struct hsmc), GFP_KERNEL); + if (!hsmc) + goto out_put_clocks; + + clk_enable(pclk); + clk_enable(mck); + + hsmc->pclk = pclk; + hsmc->mck = mck; + hsmc->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!hsmc->regs) + goto out_disable_clocks; + + dev_info(&pdev->dev, "Atmel Static Memory Controller at 0x%08lx\n", + (unsigned long)regs->start); + + platform_set_drvdata(pdev, hsmc); + + return 0; + +out_disable_clocks: + clk_disable(mck); + clk_disable(pclk); + kfree(hsmc); +out_put_clocks: + clk_put(mck); +out_put_pclk: + clk_put(pclk); + hsmc = NULL; + return ret; +} + +static struct platform_driver hsmc_driver = { + .probe = hsmc_probe, + .driver = { + .name = "smc", + }, +}; + +static int __init hsmc_init(void) +{ + return platform_driver_register(&hsmc_driver); +} +arch_initcall(hsmc_init); diff --git a/arch/avr32/mach-at32ap/hsmc.h b/arch/avr32/mach-at32ap/hsmc.h new file mode 100644 index 00000000000..5681276fafd --- /dev/null +++ b/arch/avr32/mach-at32ap/hsmc.h @@ -0,0 +1,127 @@ +/* + * Register definitions for Atmel Static Memory Controller (SMC) + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_HSMC_H__ +#define __ASM_AVR32_HSMC_H__ + +/* HSMC register offsets */ +#define HSMC_SETUP0 0x0000 +#define HSMC_PULSE0 0x0004 +#define HSMC_CYCLE0 0x0008 +#define HSMC_MODE0 0x000c +#define HSMC_SETUP1 0x0010 +#define HSMC_PULSE1 0x0014 +#define HSMC_CYCLE1 0x0018 +#define HSMC_MODE1 0x001c +#define HSMC_SETUP2 0x0020 +#define HSMC_PULSE2 0x0024 +#define HSMC_CYCLE2 0x0028 +#define HSMC_MODE2 0x002c +#define HSMC_SETUP3 0x0030 +#define HSMC_PULSE3 0x0034 +#define HSMC_CYCLE3 0x0038 +#define HSMC_MODE3 0x003c +#define HSMC_SETUP4 0x0040 +#define HSMC_PULSE4 0x0044 +#define HSMC_CYCLE4 0x0048 +#define HSMC_MODE4 0x004c +#define HSMC_SETUP5 0x0050 +#define HSMC_PULSE5 0x0054 +#define HSMC_CYCLE5 0x0058 +#define HSMC_MODE5 0x005c + +/* Bitfields in SETUP0 */ +#define HSMC_NWE_SETUP_OFFSET 0 +#define HSMC_NWE_SETUP_SIZE 6 +#define HSMC_NCS_WR_SETUP_OFFSET 8 +#define HSMC_NCS_WR_SETUP_SIZE 6 +#define HSMC_NRD_SETUP_OFFSET 16 +#define HSMC_NRD_SETUP_SIZE 6 +#define HSMC_NCS_RD_SETUP_OFFSET 24 +#define HSMC_NCS_RD_SETUP_SIZE 6 + +/* Bitfields in PULSE0 */ +#define HSMC_NWE_PULSE_OFFSET 0 +#define HSMC_NWE_PULSE_SIZE 7 +#define HSMC_NCS_WR_PULSE_OFFSET 8 +#define HSMC_NCS_WR_PULSE_SIZE 7 +#define HSMC_NRD_PULSE_OFFSET 16 +#define HSMC_NRD_PULSE_SIZE 7 +#define HSMC_NCS_RD_PULSE_OFFSET 24 +#define HSMC_NCS_RD_PULSE_SIZE 7 + +/* Bitfields in CYCLE0 */ +#define HSMC_NWE_CYCLE_OFFSET 0 +#define HSMC_NWE_CYCLE_SIZE 9 +#define HSMC_NRD_CYCLE_OFFSET 16 +#define HSMC_NRD_CYCLE_SIZE 9 + +/* Bitfields in MODE0 */ +#define HSMC_READ_MODE_OFFSET 0 +#define HSMC_READ_MODE_SIZE 1 +#define HSMC_WRITE_MODE_OFFSET 1 +#define HSMC_WRITE_MODE_SIZE 1 +#define HSMC_EXNW_MODE_OFFSET 4 +#define HSMC_EXNW_MODE_SIZE 2 +#define HSMC_BAT_OFFSET 8 +#define HSMC_BAT_SIZE 1 +#define HSMC_DBW_OFFSET 12 +#define HSMC_DBW_SIZE 2 +#define HSMC_TDF_CYCLES_OFFSET 16 +#define HSMC_TDF_CYCLES_SIZE 4 +#define HSMC_TDF_MODE_OFFSET 20 +#define HSMC_TDF_MODE_SIZE 1 +#define HSMC_PMEN_OFFSET 24 +#define HSMC_PMEN_SIZE 1 +#define HSMC_PS_OFFSET 28 +#define HSMC_PS_SIZE 2 + +/* Constants for READ_MODE */ +#define HSMC_READ_MODE_NCS_CONTROLLED 0 +#define HSMC_READ_MODE_NRD_CONTROLLED 1 + +/* Constants for WRITE_MODE */ +#define HSMC_WRITE_MODE_NCS_CONTROLLED 0 +#define HSMC_WRITE_MODE_NWE_CONTROLLED 1 + +/* Constants for EXNW_MODE */ +#define HSMC_EXNW_MODE_DISABLED 0 +#define HSMC_EXNW_MODE_RESERVED 1 +#define HSMC_EXNW_MODE_FROZEN 2 +#define HSMC_EXNW_MODE_READY 3 + +/* Constants for BAT */ +#define HSMC_BAT_BYTE_SELECT 0 +#define HSMC_BAT_BYTE_WRITE 1 + +/* Constants for DBW */ +#define HSMC_DBW_8_BITS 0 +#define HSMC_DBW_16_BITS 1 +#define HSMC_DBW_32_BITS 2 + +/* Bit manipulation macros */ +#define HSMC_BIT(name) \ + (1 << HSMC_##name##_OFFSET) +#define HSMC_BF(name,value) \ + (((value) & ((1 << HSMC_##name##_SIZE) - 1)) \ + << HSMC_##name##_OFFSET) +#define HSMC_BFEXT(name,value) \ + (((value) >> HSMC_##name##_OFFSET) \ + & ((1 << HSMC_##name##_SIZE) - 1)) +#define HSMC_BFINS(name,value,old) \ + (((old) & ~(((1 << HSMC_##name##_SIZE) - 1) \ + << HSMC_##name##_OFFSET)) | HSMC_BF(name,value)) + +/* Register access macros */ +#define hsmc_readl(port,reg) \ + readl((port)->regs + HSMC_##reg) +#define hsmc_writel(port,reg,value) \ + writel((value), (port)->regs + HSMC_##reg) + +#endif /* __ASM_AVR32_HSMC_H__ */ diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c new file mode 100644 index 00000000000..74f8c9f2f03 --- /dev/null +++ b/arch/avr32/mach-at32ap/intc.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include "intc.h" + +struct intc { + void __iomem *regs; + struct irq_chip chip; +}; + +extern struct platform_device at32_intc0_device; + +/* + * TODO: We may be able to implement mask/unmask by setting IxM flags + * in the status register. + */ +static void intc_mask_irq(unsigned int irq) +{ + +} + +static void intc_unmask_irq(unsigned int irq) +{ + +} + +static struct intc intc0 = { + .chip = { + .name = "intc", + .mask = intc_mask_irq, + .unmask = intc_unmask_irq, + }, +}; + +/* + * All interrupts go via intc at some point. + */ +asmlinkage void do_IRQ(int level, struct pt_regs *regs) +{ + struct irq_desc *desc; + unsigned int irq; + unsigned long status_reg; + + local_irq_disable(); + + irq_enter(); + + irq = intc_readl(&intc0, INTCAUSE0 - 4 * level); + desc = irq_desc + irq; + desc->handle_irq(irq, desc, regs); + + /* + * Clear all interrupt level masks so that we may handle + * interrupts during softirq processing. If this is a nested + * interrupt, interrupts must stay globally disabled until we + * return. + */ + status_reg = sysreg_read(SR); + status_reg &= ~(SYSREG_BIT(I0M) | SYSREG_BIT(I1M) + | SYSREG_BIT(I2M) | SYSREG_BIT(I3M)); + sysreg_write(SR, status_reg); + + irq_exit(); +} + +void __init init_IRQ(void) +{ + extern void _evba(void); + extern void irq_level0(void); + struct resource *regs; + struct clk *pclk; + unsigned int i; + u32 offset, readback; + + regs = platform_get_resource(&at32_intc0_device, IORESOURCE_MEM, 0); + if (!regs) { + printk(KERN_EMERG "intc: no mmio resource defined\n"); + goto fail; + } + pclk = clk_get(&at32_intc0_device.dev, "pclk"); + if (IS_ERR(pclk)) { + printk(KERN_EMERG "intc: no clock defined\n"); + goto fail; + } + + clk_enable(pclk); + + intc0.regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!intc0.regs) { + printk(KERN_EMERG "intc: failed to map registers (0x%08lx)\n", + (unsigned long)regs->start); + goto fail; + } + + /* + * Initialize all interrupts to level 0 (lowest priority). The + * priority level may be changed by calling + * irq_set_priority(). + * + */ + offset = (unsigned long)&irq_level0 - (unsigned long)&_evba; + for (i = 0; i < NR_INTERNAL_IRQS; i++) { + intc_writel(&intc0, INTPR0 + 4 * i, offset); + readback = intc_readl(&intc0, INTPR0 + 4 * i); + if (readback == offset) + set_irq_chip_and_handler(i, &intc0.chip, + handle_simple_irq); + } + + /* Unmask all interrupt levels */ + sysreg_write(SR, (sysreg_read(SR) + & ~(SR_I3M | SR_I2M | SR_I1M | SR_I0M))); + + return; + +fail: + panic("Interrupt controller initialization failed!\n"); +} + diff --git a/arch/avr32/mach-at32ap/intc.h b/arch/avr32/mach-at32ap/intc.h new file mode 100644 index 00000000000..d289ca2fff1 --- /dev/null +++ b/arch/avr32/mach-at32ap/intc.h @@ -0,0 +1,327 @@ +/* + * Automatically generated by gen-header.xsl + */ +#ifndef __ASM_AVR32_PERIHP_INTC_H__ +#define __ASM_AVR32_PERIHP_INTC_H__ + +#define INTC_NUM_INT_GRPS 33 + +#define INTC_INTPR0 0x0 +# define INTC_INTPR0_INTLEV_OFFSET 30 +# define INTC_INTPR0_INTLEV_SIZE 2 +# define INTC_INTPR0_OFFSET_OFFSET 0 +# define INTC_INTPR0_OFFSET_SIZE 24 +#define INTC_INTREQ0 0x100 +# define INTC_INTREQ0_IREQUEST0_OFFSET 0 +# define INTC_INTREQ0_IREQUEST0_SIZE 1 +# define INTC_INTREQ0_IREQUEST1_OFFSET 1 +# define INTC_INTREQ0_IREQUEST1_SIZE 1 +#define INTC_INTPR1 0x4 +# define INTC_INTPR1_INTLEV_OFFSET 30 +# define INTC_INTPR1_INTLEV_SIZE 2 +# define INTC_INTPR1_OFFSET_OFFSET 0 +# define INTC_INTPR1_OFFSET_SIZE 24 +#define INTC_INTREQ1 0x104 +# define INTC_INTREQ1_IREQUEST32_OFFSET 0 +# define INTC_INTREQ1_IREQUEST32_SIZE 1 +# define INTC_INTREQ1_IREQUEST33_OFFSET 1 +# define INTC_INTREQ1_IREQUEST33_SIZE 1 +# define INTC_INTREQ1_IREQUEST34_OFFSET 2 +# define INTC_INTREQ1_IREQUEST34_SIZE 1 +# define INTC_INTREQ1_IREQUEST35_OFFSET 3 +# define INTC_INTREQ1_IREQUEST35_SIZE 1 +# define INTC_INTREQ1_IREQUEST36_OFFSET 4 +# define INTC_INTREQ1_IREQUEST36_SIZE 1 +# define INTC_INTREQ1_IREQUEST37_OFFSET 5 +# define INTC_INTREQ1_IREQUEST37_SIZE 1 +#define INTC_INTPR2 0x8 +# define INTC_INTPR2_INTLEV_OFFSET 30 +# define INTC_INTPR2_INTLEV_SIZE 2 +# define INTC_INTPR2_OFFSET_OFFSET 0 +# define INTC_INTPR2_OFFSET_SIZE 24 +#define INTC_INTREQ2 0x108 +# define INTC_INTREQ2_IREQUEST64_OFFSET 0 +# define INTC_INTREQ2_IREQUEST64_SIZE 1 +# define INTC_INTREQ2_IREQUEST65_OFFSET 1 +# define INTC_INTREQ2_IREQUEST65_SIZE 1 +# define INTC_INTREQ2_IREQUEST66_OFFSET 2 +# define INTC_INTREQ2_IREQUEST66_SIZE 1 +# define INTC_INTREQ2_IREQUEST67_OFFSET 3 +# define INTC_INTREQ2_IREQUEST67_SIZE 1 +# define INTC_INTREQ2_IREQUEST68_OFFSET 4 +# define INTC_INTREQ2_IREQUEST68_SIZE 1 +#define INTC_INTPR3 0xc +# define INTC_INTPR3_INTLEV_OFFSET 30 +# define INTC_INTPR3_INTLEV_SIZE 2 +# define INTC_INTPR3_OFFSET_OFFSET 0 +# define INTC_INTPR3_OFFSET_SIZE 24 +#define INTC_INTREQ3 0x10c +# define INTC_INTREQ3_IREQUEST96_OFFSET 0 +# define INTC_INTREQ3_IREQUEST96_SIZE 1 +#define INTC_INTPR4 0x10 +# define INTC_INTPR4_INTLEV_OFFSET 30 +# define INTC_INTPR4_INTLEV_SIZE 2 +# define INTC_INTPR4_OFFSET_OFFSET 0 +# define INTC_INTPR4_OFFSET_SIZE 24 +#define INTC_INTREQ4 0x110 +# define INTC_INTREQ4_IREQUEST128_OFFSET 0 +# define INTC_INTREQ4_IREQUEST128_SIZE 1 +#define INTC_INTPR5 0x14 +# define INTC_INTPR5_INTLEV_OFFSET 30 +# define INTC_INTPR5_INTLEV_SIZE 2 +# define INTC_INTPR5_OFFSET_OFFSET 0 +# define INTC_INTPR5_OFFSET_SIZE 24 +#define INTC_INTREQ5 0x114 +# define INTC_INTREQ5_IREQUEST160_OFFSET 0 +# define INTC_INTREQ5_IREQUEST160_SIZE 1 +#define INTC_INTPR6 0x18 +# define INTC_INTPR6_INTLEV_OFFSET 30 +# define INTC_INTPR6_INTLEV_SIZE 2 +# define INTC_INTPR6_OFFSET_OFFSET 0 +# define INTC_INTPR6_OFFSET_SIZE 24 +#define INTC_INTREQ6 0x118 +# define INTC_INTREQ6_IREQUEST192_OFFSET 0 +# define INTC_INTREQ6_IREQUEST192_SIZE 1 +#define INTC_INTPR7 0x1c +# define INTC_INTPR7_INTLEV_OFFSET 30 +# define INTC_INTPR7_INTLEV_SIZE 2 +# define INTC_INTPR7_OFFSET_OFFSET 0 +# define INTC_INTPR7_OFFSET_SIZE 24 +#define INTC_INTREQ7 0x11c +# define INTC_INTREQ7_IREQUEST224_OFFSET 0 +# define INTC_INTREQ7_IREQUEST224_SIZE 1 +#define INTC_INTPR8 0x20 +# define INTC_INTPR8_INTLEV_OFFSET 30 +# define INTC_INTPR8_INTLEV_SIZE 2 +# define INTC_INTPR8_OFFSET_OFFSET 0 +# define INTC_INTPR8_OFFSET_SIZE 24 +#define INTC_INTREQ8 0x120 +# define INTC_INTREQ8_IREQUEST256_OFFSET 0 +# define INTC_INTREQ8_IREQUEST256_SIZE 1 +#define INTC_INTPR9 0x24 +# define INTC_INTPR9_INTLEV_OFFSET 30 +# define INTC_INTPR9_INTLEV_SIZE 2 +# define INTC_INTPR9_OFFSET_OFFSET 0 +# define INTC_INTPR9_OFFSET_SIZE 24 +#define INTC_INTREQ9 0x124 +# define INTC_INTREQ9_IREQUEST288_OFFSET 0 +# define INTC_INTREQ9_IREQUEST288_SIZE 1 +#define INTC_INTPR10 0x28 +# define INTC_INTPR10_INTLEV_OFFSET 30 +# define INTC_INTPR10_INTLEV_SIZE 2 +# define INTC_INTPR10_OFFSET_OFFSET 0 +# define INTC_INTPR10_OFFSET_SIZE 24 +#define INTC_INTREQ10 0x128 +# define INTC_INTREQ10_IREQUEST320_OFFSET 0 +# define INTC_INTREQ10_IREQUEST320_SIZE 1 +#define INTC_INTPR11 0x2c +# define INTC_INTPR11_INTLEV_OFFSET 30 +# define INTC_INTPR11_INTLEV_SIZE 2 +# define INTC_INTPR11_OFFSET_OFFSET 0 +# define INTC_INTPR11_OFFSET_SIZE 24 +#define INTC_INTREQ11 0x12c +# define INTC_INTREQ11_IREQUEST352_OFFSET 0 +# define INTC_INTREQ11_IREQUEST352_SIZE 1 +#define INTC_INTPR12 0x30 +# define INTC_INTPR12_INTLEV_OFFSET 30 +# define INTC_INTPR12_INTLEV_SIZE 2 +# define INTC_INTPR12_OFFSET_OFFSET 0 +# define INTC_INTPR12_OFFSET_SIZE 24 +#define INTC_INTREQ12 0x130 +# define INTC_INTREQ12_IREQUEST384_OFFSET 0 +# define INTC_INTREQ12_IREQUEST384_SIZE 1 +#define INTC_INTPR13 0x34 +# define INTC_INTPR13_INTLEV_OFFSET 30 +# define INTC_INTPR13_INTLEV_SIZE 2 +# define INTC_INTPR13_OFFSET_OFFSET 0 +# define INTC_INTPR13_OFFSET_SIZE 24 +#define INTC_INTREQ13 0x134 +# define INTC_INTREQ13_IREQUEST416_OFFSET 0 +# define INTC_INTREQ13_IREQUEST416_SIZE 1 +#define INTC_INTPR14 0x38 +# define INTC_INTPR14_INTLEV_OFFSET 30 +# define INTC_INTPR14_INTLEV_SIZE 2 +# define INTC_INTPR14_OFFSET_OFFSET 0 +# define INTC_INTPR14_OFFSET_SIZE 24 +#define INTC_INTREQ14 0x138 +# define INTC_INTREQ14_IREQUEST448_OFFSET 0 +# define INTC_INTREQ14_IREQUEST448_SIZE 1 +#define INTC_INTPR15 0x3c +# define INTC_INTPR15_INTLEV_OFFSET 30 +# define INTC_INTPR15_INTLEV_SIZE 2 +# define INTC_INTPR15_OFFSET_OFFSET 0 +# define INTC_INTPR15_OFFSET_SIZE 24 +#define INTC_INTREQ15 0x13c +# define INTC_INTREQ15_IREQUEST480_OFFSET 0 +# define INTC_INTREQ15_IREQUEST480_SIZE 1 +#define INTC_INTPR16 0x40 +# define INTC_INTPR16_INTLEV_OFFSET 30 +# define INTC_INTPR16_INTLEV_SIZE 2 +# define INTC_INTPR16_OFFSET_OFFSET 0 +# define INTC_INTPR16_OFFSET_SIZE 24 +#define INTC_INTREQ16 0x140 +# define INTC_INTREQ16_IREQUEST512_OFFSET 0 +# define INTC_INTREQ16_IREQUEST512_SIZE 1 +#define INTC_INTPR17 0x44 +# define INTC_INTPR17_INTLEV_OFFSET 30 +# define INTC_INTPR17_INTLEV_SIZE 2 +# define INTC_INTPR17_OFFSET_OFFSET 0 +# define INTC_INTPR17_OFFSET_SIZE 24 +#define INTC_INTREQ17 0x144 +# define INTC_INTREQ17_IREQUEST544_OFFSET 0 +# define INTC_INTREQ17_IREQUEST544_SIZE 1 +#define INTC_INTPR18 0x48 +# define INTC_INTPR18_INTLEV_OFFSET 30 +# define INTC_INTPR18_INTLEV_SIZE 2 +# define INTC_INTPR18_OFFSET_OFFSET 0 +# define INTC_INTPR18_OFFSET_SIZE 24 +#define INTC_INTREQ18 0x148 +# define INTC_INTREQ18_IREQUEST576_OFFSET 0 +# define INTC_INTREQ18_IREQUEST576_SIZE 1 +#define INTC_INTPR19 0x4c +# define INTC_INTPR19_INTLEV_OFFSET 30 +# define INTC_INTPR19_INTLEV_SIZE 2 +# define INTC_INTPR19_OFFSET_OFFSET 0 +# define INTC_INTPR19_OFFSET_SIZE 24 +#define INTC_INTREQ19 0x14c +# define INTC_INTREQ19_IREQUEST608_OFFSET 0 +# define INTC_INTREQ19_IREQUEST608_SIZE 1 +# define INTC_INTREQ19_IREQUEST609_OFFSET 1 +# define INTC_INTREQ19_IREQUEST609_SIZE 1 +# define INTC_INTREQ19_IREQUEST610_OFFSET 2 +# define INTC_INTREQ19_IREQUEST610_SIZE 1 +# define INTC_INTREQ19_IREQUEST611_OFFSET 3 +# define INTC_INTREQ19_IREQUEST611_SIZE 1 +#define INTC_INTPR20 0x50 +# define INTC_INTPR20_INTLEV_OFFSET 30 +# define INTC_INTPR20_INTLEV_SIZE 2 +# define INTC_INTPR20_OFFSET_OFFSET 0 +# define INTC_INTPR20_OFFSET_SIZE 24 +#define INTC_INTREQ20 0x150 +# define INTC_INTREQ20_IREQUEST640_OFFSET 0 +# define INTC_INTREQ20_IREQUEST640_SIZE 1 +#define INTC_INTPR21 0x54 +# define INTC_INTPR21_INTLEV_OFFSET 30 +# define INTC_INTPR21_INTLEV_SIZE 2 +# define INTC_INTPR21_OFFSET_OFFSET 0 +# define INTC_INTPR21_OFFSET_SIZE 24 +#define INTC_INTREQ21 0x154 +# define INTC_INTREQ21_IREQUEST672_OFFSET 0 +# define INTC_INTREQ21_IREQUEST672_SIZE 1 +#define INTC_INTPR22 0x58 +# define INTC_INTPR22_INTLEV_OFFSET 30 +# define INTC_INTPR22_INTLEV_SIZE 2 +# define INTC_INTPR22_OFFSET_OFFSET 0 +# define INTC_INTPR22_OFFSET_SIZE 24 +#define INTC_INTREQ22 0x158 +# define INTC_INTREQ22_IREQUEST704_OFFSET 0 +# define INTC_INTREQ22_IREQUEST704_SIZE 1 +# define INTC_INTREQ22_IREQUEST705_OFFSET 1 +# define INTC_INTREQ22_IREQUEST705_SIZE 1 +# define INTC_INTREQ22_IREQUEST706_OFFSET 2 +# define INTC_INTREQ22_IREQUEST706_SIZE 1 +#define INTC_INTPR23 0x5c +# define INTC_INTPR23_INTLEV_OFFSET 30 +# define INTC_INTPR23_INTLEV_SIZE 2 +# define INTC_INTPR23_OFFSET_OFFSET 0 +# define INTC_INTPR23_OFFSET_SIZE 24 +#define INTC_INTREQ23 0x15c +# define INTC_INTREQ23_IREQUEST736_OFFSET 0 +# define INTC_INTREQ23_IREQUEST736_SIZE 1 +# define INTC_INTREQ23_IREQUEST737_OFFSET 1 +# define INTC_INTREQ23_IREQUEST737_SIZE 1 +# define INTC_INTREQ23_IREQUEST738_OFFSET 2 +# define INTC_INTREQ23_IREQUEST738_SIZE 1 +#define INTC_INTPR24 0x60 +# define INTC_INTPR24_INTLEV_OFFSET 30 +# define INTC_INTPR24_INTLEV_SIZE 2 +# define INTC_INTPR24_OFFSET_OFFSET 0 +# define INTC_INTPR24_OFFSET_SIZE 24 +#define INTC_INTREQ24 0x160 +# define INTC_INTREQ24_IREQUEST768_OFFSET 0 +# define INTC_INTREQ24_IREQUEST768_SIZE 1 +#define INTC_INTPR25 0x64 +# define INTC_INTPR25_INTLEV_OFFSET 30 +# define INTC_INTPR25_INTLEV_SIZE 2 +# define INTC_INTPR25_OFFSET_OFFSET 0 +# define INTC_INTPR25_OFFSET_SIZE 24 +#define INTC_INTREQ25 0x164 +# define INTC_INTREQ25_IREQUEST800_OFFSET 0 +# define INTC_INTREQ25_IREQUEST800_SIZE 1 +#define INTC_INTPR26 0x68 +# define INTC_INTPR26_INTLEV_OFFSET 30 +# define INTC_INTPR26_INTLEV_SIZE 2 +# define INTC_INTPR26_OFFSET_OFFSET 0 +# define INTC_INTPR26_OFFSET_SIZE 24 +#define INTC_INTREQ26 0x168 +# define INTC_INTREQ26_IREQUEST832_OFFSET 0 +# define INTC_INTREQ26_IREQUEST832_SIZE 1 +#define INTC_INTPR27 0x6c +# define INTC_INTPR27_INTLEV_OFFSET 30 +# define INTC_INTPR27_INTLEV_SIZE 2 +# define INTC_INTPR27_OFFSET_OFFSET 0 +# define INTC_INTPR27_OFFSET_SIZE 24 +#define INTC_INTREQ27 0x16c +# define INTC_INTREQ27_IREQUEST864_OFFSET 0 +# define INTC_INTREQ27_IREQUEST864_SIZE 1 +#define INTC_INTPR28 0x70 +# define INTC_INTPR28_INTLEV_OFFSET 30 +# define INTC_INTPR28_INTLEV_SIZE 2 +# define INTC_INTPR28_OFFSET_OFFSET 0 +# define INTC_INTPR28_OFFSET_SIZE 24 +#define INTC_INTREQ28 0x170 +# define INTC_INTREQ28_IREQUEST896_OFFSET 0 +# define INTC_INTREQ28_IREQUEST896_SIZE 1 +#define INTC_INTPR29 0x74 +# define INTC_INTPR29_INTLEV_OFFSET 30 +# define INTC_INTPR29_INTLEV_SIZE 2 +# define INTC_INTPR29_OFFSET_OFFSET 0 +# define INTC_INTPR29_OFFSET_SIZE 24 +#define INTC_INTREQ29 0x174 +# define INTC_INTREQ29_IREQUEST928_OFFSET 0 +# define INTC_INTREQ29_IREQUEST928_SIZE 1 +#define INTC_INTPR30 0x78 +# define INTC_INTPR30_INTLEV_OFFSET 30 +# define INTC_INTPR30_INTLEV_SIZE 2 +# define INTC_INTPR30_OFFSET_OFFSET 0 +# define INTC_INTPR30_OFFSET_SIZE 24 +#define INTC_INTREQ30 0x178 +# define INTC_INTREQ30_IREQUEST960_OFFSET 0 +# define INTC_INTREQ30_IREQUEST960_SIZE 1 +#define INTC_INTPR31 0x7c +# define INTC_INTPR31_INTLEV_OFFSET 30 +# define INTC_INTPR31_INTLEV_SIZE 2 +# define INTC_INTPR31_OFFSET_OFFSET 0 +# define INTC_INTPR31_OFFSET_SIZE 24 +#define INTC_INTREQ31 0x17c +# define INTC_INTREQ31_IREQUEST992_OFFSET 0 +# define INTC_INTREQ31_IREQUEST992_SIZE 1 +#define INTC_INTPR32 0x80 +# define INTC_INTPR32_INTLEV_OFFSET 30 +# define INTC_INTPR32_INTLEV_SIZE 2 +# define INTC_INTPR32_OFFSET_OFFSET 0 +# define INTC_INTPR32_OFFSET_SIZE 24 +#define INTC_INTREQ32 0x180 +# define INTC_INTREQ32_IREQUEST1024_OFFSET 0 +# define INTC_INTREQ32_IREQUEST1024_SIZE 1 +#define INTC_INTCAUSE0 0x20c +# define INTC_INTCAUSE0_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE0_CAUSEGRP_SIZE 6 +#define INTC_INTCAUSE1 0x208 +# define INTC_INTCAUSE1_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE1_CAUSEGRP_SIZE 6 +#define INTC_INTCAUSE2 0x204 +# define INTC_INTCAUSE2_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE2_CAUSEGRP_SIZE 6 +#define INTC_INTCAUSE3 0x200 +# define INTC_INTCAUSE3_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE3_CAUSEGRP_SIZE 6 + +#define INTC_BIT(name) (1 << INTC_##name##_OFFSET) +#define INTC_MKBF(name, value) (((value) & ((1 << INTC_##name##_SIZE) - 1)) << INTC_##name##_OFFSET) +#define INTC_GETBF(name, value) (((value) >> INTC_##name##_OFFSET) & ((1 << INTC_##name##_SIZE) - 1)) + +#define intc_readl(port,reg) readl((port)->regs + INTC_##reg) +#define intc_writel(port,reg,value) writel((value), (port)->regs + INTC_##reg) + +#endif /* __ASM_AVR32_PERIHP_INTC_H__ */ diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c new file mode 100644 index 00000000000..d3aabfca859 --- /dev/null +++ b/arch/avr32/mach-at32ap/pio.c @@ -0,0 +1,118 @@ +/* + * Atmel PIO2 Port Multiplexer support + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/fs.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include <asm/arch/portmux.h> + +#include "pio.h" + +#define MAX_NR_PIO_DEVICES 8 + +struct pio_device { + void __iomem *regs; + const struct platform_device *pdev; + struct clk *clk; + u32 alloc_mask; + char name[32]; +}; + +static struct pio_device pio_dev[MAX_NR_PIO_DEVICES]; + +void portmux_set_func(unsigned int portmux_id, unsigned int pin_id, + unsigned int function_id) +{ + struct pio_device *pio; + u32 mask = 1 << pin_id; + + BUG_ON(portmux_id >= MAX_NR_PIO_DEVICES); + + pio = &pio_dev[portmux_id]; + + if (function_id) + pio_writel(pio, BSR, mask); + else + pio_writel(pio, ASR, mask); + pio_writel(pio, PDR, mask); +} + +static int __init pio_probe(struct platform_device *pdev) +{ + struct pio_device *pio = NULL; + + BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES); + pio = &pio_dev[pdev->id]; + BUG_ON(!pio->regs); + + /* TODO: Interrupts */ + + platform_set_drvdata(pdev, pio); + + printk(KERN_INFO "%s: Atmel Port Multiplexer at 0x%p (irq %d)\n", + pio->name, pio->regs, platform_get_irq(pdev, 0)); + + return 0; +} + +static struct platform_driver pio_driver = { + .probe = pio_probe, + .driver = { + .name = "pio", + }, +}; + +static int __init pio_init(void) +{ + return platform_driver_register(&pio_driver); +} +subsys_initcall(pio_init); + +void __init at32_init_pio(struct platform_device *pdev) +{ + struct resource *regs; + struct pio_device *pio; + + if (pdev->id > MAX_NR_PIO_DEVICES) { + dev_err(&pdev->dev, "only %d PIO devices supported\n", + MAX_NR_PIO_DEVICES); + return; + } + + pio = &pio_dev[pdev->id]; + snprintf(pio->name, sizeof(pio->name), "pio%d", pdev->id); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "no mmio resource defined\n"); + return; + } + + pio->clk = clk_get(&pdev->dev, "mck"); + if (IS_ERR(pio->clk)) + /* + * This is a fatal error, but if we continue we might + * be so lucky that we manage to initialize the + * console and display this message... + */ + dev_err(&pdev->dev, "no mck clock defined\n"); + else + clk_enable(pio->clk); + + pio->pdev = pdev; + pio->regs = ioremap(regs->start, regs->end - regs->start + 1); + + pio_writel(pio, ODR, ~0UL); + pio_writel(pio, PER, ~0UL); +} diff --git a/arch/avr32/mach-at32ap/pio.h b/arch/avr32/mach-at32ap/pio.h new file mode 100644 index 00000000000..cfea1235159 --- /dev/null +++ b/arch/avr32/mach-at32ap/pio.h @@ -0,0 +1,178 @@ +/* + * Atmel PIO2 Port Multiplexer support + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AVR32_AT32AP_PIO_H__ +#define __ARCH_AVR32_AT32AP_PIO_H__ + +/* PIO register offsets */ +#define PIO_PER 0x0000 +#define PIO_PDR 0x0004 +#define PIO_PSR 0x0008 +#define PIO_OER 0x0010 +#define PIO_ODR 0x0014 +#define PIO_OSR 0x0018 +#define PIO_IFER 0x0020 +#define PIO_IFDR 0x0024 +#define PIO_ISFR 0x0028 +#define PIO_SODR 0x0030 +#define PIO_CODR 0x0034 +#define PIO_ODSR 0x0038 +#define PIO_PDSR 0x003c +#define PIO_IER 0x0040 +#define PIO_IDR 0x0044 +#define PIO_IMR 0x0048 +#define PIO_ISR 0x004c +#define PIO_MDER 0x0050 +#define PIO_MDDR 0x0054 +#define PIO_MDSR 0x0058 +#define PIO_PUDR 0x0060 +#define PIO_PUER 0x0064 +#define PIO_PUSR 0x0068 +#define PIO_ASR 0x0070 +#define PIO_BSR 0x0074 +#define PIO_ABSR 0x0078 +#define PIO_OWER 0x00a0 +#define PIO_OWDR 0x00a4 +#define PIO_OWSR 0x00a8 + +/* Bitfields in PER */ + +/* Bitfields in PDR */ + +/* Bitfields in PSR */ + +/* Bitfields in OER */ + +/* Bitfields in ODR */ + +/* Bitfields in OSR */ + +/* Bitfields in IFER */ + +/* Bitfields in IFDR */ + +/* Bitfields in ISFR */ + +/* Bitfields in SODR */ + +/* Bitfields in CODR */ + +/* Bitfields in ODSR */ + +/* Bitfields in PDSR */ + +/* Bitfields in IER */ + +/* Bitfields in IDR */ + +/* Bitfields in IMR */ + +/* Bitfields in ISR */ + +/* Bitfields in MDER */ + +/* Bitfields in MDDR */ + +/* Bitfields in MDSR */ + +/* Bitfields in PUDR */ + +/* Bitfields in PUER */ + +/* Bitfields in PUSR */ + +/* Bitfields in ASR */ + +/* Bitfields in BSR */ + +/* Bitfields in ABSR */ +#define PIO_P0_OFFSET 0 +#define PIO_P0_SIZE 1 +#define PIO_P1_OFFSET 1 +#define PIO_P1_SIZE 1 +#define PIO_P2_OFFSET 2 +#define PIO_P2_SIZE 1 +#define PIO_P3_OFFSET 3 +#define PIO_P3_SIZE 1 +#define PIO_P4_OFFSET 4 +#define PIO_P4_SIZE 1 +#define PIO_P5_OFFSET 5 +#define PIO_P5_SIZE 1 +#define PIO_P6_OFFSET 6 +#define PIO_P6_SIZE 1 +#define PIO_P7_OFFSET 7 +#define PIO_P7_SIZE 1 +#define PIO_P8_OFFSET 8 +#define PIO_P8_SIZE 1 +#define PIO_P9_OFFSET 9 +#define PIO_P9_SIZE 1 +#define PIO_P10_OFFSET 10 +#define PIO_P10_SIZE 1 +#define PIO_P11_OFFSET 11 +#define PIO_P11_SIZE 1 +#define PIO_P12_OFFSET 12 +#define PIO_P12_SIZE 1 +#define PIO_P13_OFFSET 13 +#define PIO_P13_SIZE 1 +#define PIO_P14_OFFSET 14 +#define PIO_P14_SIZE 1 +#define PIO_P15_OFFSET 15 +#define PIO_P15_SIZE 1 +#define PIO_P16_OFFSET 16 +#define PIO_P16_SIZE 1 +#define PIO_P17_OFFSET 17 +#define PIO_P17_SIZE 1 +#define PIO_P18_OFFSET 18 +#define PIO_P18_SIZE 1 +#define PIO_P19_OFFSET 19 +#define PIO_P19_SIZE 1 +#define PIO_P20_OFFSET 20 +#define PIO_P20_SIZE 1 +#define PIO_P21_OFFSET 21 +#define PIO_P21_SIZE 1 +#define PIO_P22_OFFSET 22 +#define PIO_P22_SIZE 1 +#define PIO_P23_OFFSET 23 +#define PIO_P23_SIZE 1 +#define PIO_P24_OFFSET 24 +#define PIO_P24_SIZE 1 +#define PIO_P25_OFFSET 25 +#define PIO_P25_SIZE 1 +#define PIO_P26_OFFSET 26 +#define PIO_P26_SIZE 1 +#define PIO_P27_OFFSET 27 +#define PIO_P27_SIZE 1 +#define PIO_P28_OFFSET 28 +#define PIO_P28_SIZE 1 +#define PIO_P29_OFFSET 29 +#define PIO_P29_SIZE 1 +#define PIO_P30_OFFSET 30 +#define PIO_P30_SIZE 1 +#define PIO_P31_OFFSET 31 +#define PIO_P31_SIZE 1 + +/* Bitfields in OWER */ + +/* Bitfields in OWDR */ + +/* Bitfields in OWSR */ + +/* Bit manipulation macros */ +#define PIO_BIT(name) (1 << PIO_##name##_OFFSET) +#define PIO_BF(name,value) (((value) & ((1 << PIO_##name##_SIZE) - 1)) << PIO_##name##_OFFSET) +#define PIO_BFEXT(name,value) (((value) >> PIO_##name##_OFFSET) & ((1 << PIO_##name##_SIZE) - 1)) +#define PIO_BFINS(name,value,old) (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value)) + +/* Register access macros */ +#define pio_readl(port,reg) readl((port)->regs + PIO_##reg) +#define pio_writel(port,reg,value) writel((value), (port)->regs + PIO_##reg) + +void at32_init_pio(struct platform_device *pdev); + +#endif /* __ARCH_AVR32_AT32AP_PIO_H__ */ diff --git a/arch/avr32/mach-at32ap/sm.c b/arch/avr32/mach-at32ap/sm.c new file mode 100644 index 00000000000..03306eb0345 --- /dev/null +++ b/arch/avr32/mach-at32ap/sm.c @@ -0,0 +1,289 @@ +/* + * System Manager driver for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/random.h> +#include <linux/spinlock.h> + +#include <asm/intc.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/arch/sm.h> + +#include "sm.h" + +#define SM_EIM_IRQ_RESOURCE 1 +#define SM_PM_IRQ_RESOURCE 2 +#define SM_RTC_IRQ_RESOURCE 3 + +#define to_eim(irqc) container_of(irqc, struct at32_sm, irqc) + +struct at32_sm system_manager; + +int __init at32_sm_init(void) +{ + struct resource *regs; + struct at32_sm *sm = &system_manager; + int ret = -ENXIO; + + regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0); + if (!regs) + goto fail; + + spin_lock_init(&sm->lock); + sm->pdev = &at32_sm_device; + + ret = -ENOMEM; + sm->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!sm->regs) + goto fail; + + return 0; + +fail: + printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret); + return ret; +} + +/* + * External Interrupt Module (EIM). + * + * EIM gets level- or edge-triggered interrupts of either polarity + * from the outside and converts it to active-high level-triggered + * interrupts that the internal interrupt controller can handle. EIM + * also provides masking/unmasking of interrupts, as well as + * acknowledging of edge-triggered interrupts. + */ + +static irqreturn_t spurious_eim_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + printk(KERN_WARNING "Spurious EIM interrupt %d\n", irq); + disable_irq(irq); + return IRQ_NONE; +} + +static struct irqaction eim_spurious_action = { + .handler = spurious_eim_interrupt, +}; + +static irqreturn_t eim_handle_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct irq_controller * irqc = dev_id; + struct at32_sm *sm = to_eim(irqc); + unsigned long pending; + + /* + * No need to disable interrupts globally. The interrupt + * level relevant to this group must be masked all the time, + * so we know that this particular EIM instance will not be + * re-entered. + */ + spin_lock(&sm->lock); + + pending = intc_get_pending(sm->irqc.irq_group); + if (unlikely(!pending)) { + printk(KERN_ERR "EIM (group %u): No interrupts pending!\n", + sm->irqc.irq_group); + goto unlock; + } + + do { + struct irqaction *action; + unsigned int i; + + i = fls(pending) - 1; + pending &= ~(1 << i); + action = sm->action[i]; + + /* Acknowledge the interrupt */ + sm_writel(sm, EIM_ICR, 1 << i); + + spin_unlock(&sm->lock); + + if (action->flags & SA_INTERRUPT) + local_irq_disable(); + action->handler(sm->irqc.first_irq + i, action->dev_id, regs); + local_irq_enable(); + spin_lock(&sm->lock); + if (action->flags & SA_SAMPLE_RANDOM) + add_interrupt_randomness(sm->irqc.first_irq + i); + } while (pending); + +unlock: + spin_unlock(&sm->lock); + return IRQ_HANDLED; +} + +static void eim_mask(struct irq_controller *irqc, unsigned int irq) +{ + struct at32_sm *sm = to_eim(irqc); + unsigned int i; + + i = irq - sm->irqc.first_irq; + sm_writel(sm, EIM_IDR, 1 << i); +} + +static void eim_unmask(struct irq_controller *irqc, unsigned int irq) +{ + struct at32_sm *sm = to_eim(irqc); + unsigned int i; + + i = irq - sm->irqc.first_irq; + sm_writel(sm, EIM_IER, 1 << i); +} + +static int eim_setup(struct irq_controller *irqc, unsigned int irq, + struct irqaction *action) +{ + struct at32_sm *sm = to_eim(irqc); + sm->action[irq - sm->irqc.first_irq] = action; + /* Acknowledge earlier interrupts */ + sm_writel(sm, EIM_ICR, (1<<(irq - sm->irqc.first_irq))); + eim_unmask(irqc, irq); + return 0; +} + +static void eim_free(struct irq_controller *irqc, unsigned int irq, + void *dev) +{ + struct at32_sm *sm = to_eim(irqc); + eim_mask(irqc, irq); + sm->action[irq - sm->irqc.first_irq] = &eim_spurious_action; +} + +static int eim_set_type(struct irq_controller *irqc, unsigned int irq, + unsigned int type) +{ + struct at32_sm *sm = to_eim(irqc); + unsigned long flags; + u32 value, pattern; + + spin_lock_irqsave(&sm->lock, flags); + + pattern = 1 << (irq - sm->irqc.first_irq); + + value = sm_readl(sm, EIM_MODE); + if (type & IRQ_TYPE_LEVEL) + value |= pattern; + else + value &= ~pattern; + sm_writel(sm, EIM_MODE, value); + value = sm_readl(sm, EIM_EDGE); + if (type & IRQ_EDGE_RISING) + value |= pattern; + else + value &= ~pattern; + sm_writel(sm, EIM_EDGE, value); + value = sm_readl(sm, EIM_LEVEL); + if (type & IRQ_LEVEL_HIGH) + value |= pattern; + else + value &= ~pattern; + sm_writel(sm, EIM_LEVEL, value); + + spin_unlock_irqrestore(&sm->lock, flags); + + return 0; +} + +static unsigned int eim_get_type(struct irq_controller *irqc, + unsigned int irq) +{ + struct at32_sm *sm = to_eim(irqc); + unsigned long flags; + unsigned int type = 0; + u32 mode, edge, level, pattern; + + pattern = 1 << (irq - sm->irqc.first_irq); + + spin_lock_irqsave(&sm->lock, flags); + mode = sm_readl(sm, EIM_MODE); + edge = sm_readl(sm, EIM_EDGE); + level = sm_readl(sm, EIM_LEVEL); + spin_unlock_irqrestore(&sm->lock, flags); + + if (mode & pattern) + type |= IRQ_TYPE_LEVEL; + if (edge & pattern) + type |= IRQ_EDGE_RISING; + if (level & pattern) + type |= IRQ_LEVEL_HIGH; + + return type; +} + +static struct irq_controller_class eim_irq_class = { + .typename = "EIM", + .handle = eim_handle_irq, + .setup = eim_setup, + .free = eim_free, + .mask = eim_mask, + .unmask = eim_unmask, + .set_type = eim_set_type, + .get_type = eim_get_type, +}; + +static int __init eim_init(void) +{ + struct at32_sm *sm = &system_manager; + unsigned int i; + u32 pattern; + int ret; + + /* + * The EIM is really the same module as SM, so register + * mapping, etc. has been taken care of already. + */ + + /* + * Find out how many interrupt lines that are actually + * implemented in hardware. + */ + sm_writel(sm, EIM_IDR, ~0UL); + sm_writel(sm, EIM_MODE, ~0UL); + pattern = sm_readl(sm, EIM_MODE); + sm->irqc.nr_irqs = fls(pattern); + + ret = -ENOMEM; + sm->action = kmalloc(sizeof(*sm->action) * sm->irqc.nr_irqs, + GFP_KERNEL); + if (!sm->action) + goto out; + + for (i = 0; i < sm->irqc.nr_irqs; i++) + sm->action[i] = &eim_spurious_action; + + spin_lock_init(&sm->lock); + sm->irqc.irq_group = sm->pdev->resource[SM_EIM_IRQ_RESOURCE].start; + sm->irqc.class = &eim_irq_class; + + ret = intc_register_controller(&sm->irqc); + if (ret < 0) + goto out_free_actions; + + printk("EIM: External Interrupt Module at 0x%p, IRQ group %u\n", + sm->regs, sm->irqc.irq_group); + printk("EIM: Handling %u external IRQs, starting with IRQ%u\n", + sm->irqc.nr_irqs, sm->irqc.first_irq); + + return 0; + +out_free_actions: + kfree(sm->action); +out: + return ret; +} +arch_initcall(eim_init); diff --git a/arch/avr32/mach-at32ap/sm.h b/arch/avr32/mach-at32ap/sm.h new file mode 100644 index 00000000000..27565822ae2 --- /dev/null +++ b/arch/avr32/mach-at32ap/sm.h @@ -0,0 +1,240 @@ +/* + * Register definitions for SM + * + * System Manager + */ +#ifndef __ASM_AVR32_SM_H__ +#define __ASM_AVR32_SM_H__ + +/* SM register offsets */ +#define SM_PM_MCCTRL 0x0000 +#define SM_PM_CKSEL 0x0004 +#define SM_PM_CPU_MASK 0x0008 +#define SM_PM_HSB_MASK 0x000c +#define SM_PM_PBA_MASK 0x0010 +#define SM_PM_PBB_MASK 0x0014 +#define SM_PM_PLL0 0x0020 +#define SM_PM_PLL1 0x0024 +#define SM_PM_VCTRL 0x0030 +#define SM_PM_VMREF 0x0034 +#define SM_PM_VMV 0x0038 +#define SM_PM_IER 0x0040 +#define SM_PM_IDR 0x0044 +#define SM_PM_IMR 0x0048 +#define SM_PM_ISR 0x004c +#define SM_PM_ICR 0x0050 +#define SM_PM_GCCTRL 0x0060 +#define SM_RTC_CTRL 0x0080 +#define SM_RTC_VAL 0x0084 +#define SM_RTC_TOP 0x0088 +#define SM_RTC_IER 0x0090 +#define SM_RTC_IDR 0x0094 +#define SM_RTC_IMR 0x0098 +#define SM_RTC_ISR 0x009c +#define SM_RTC_ICR 0x00a0 +#define SM_WDT_CTRL 0x00b0 +#define SM_WDT_CLR 0x00b4 +#define SM_WDT_EXT 0x00b8 +#define SM_RC_RCAUSE 0x00c0 +#define SM_EIM_IER 0x0100 +#define SM_EIM_IDR 0x0104 +#define SM_EIM_IMR 0x0108 +#define SM_EIM_ISR 0x010c +#define SM_EIM_ICR 0x0110 +#define SM_EIM_MODE 0x0114 +#define SM_EIM_EDGE 0x0118 +#define SM_EIM_LEVEL 0x011c +#define SM_EIM_TEST 0x0120 +#define SM_EIM_NMIC 0x0124 + +/* Bitfields in PM_MCCTRL */ + +/* Bitfields in PM_CKSEL */ +#define SM_CPUSEL_OFFSET 0 +#define SM_CPUSEL_SIZE 3 +#define SM_CPUDIV_OFFSET 7 +#define SM_CPUDIV_SIZE 1 +#define SM_HSBSEL_OFFSET 8 +#define SM_HSBSEL_SIZE 3 +#define SM_HSBDIV_OFFSET 15 +#define SM_HSBDIV_SIZE 1 +#define SM_PBASEL_OFFSET 16 +#define SM_PBASEL_SIZE 3 +#define SM_PBADIV_OFFSET 23 +#define SM_PBADIV_SIZE 1 +#define SM_PBBSEL_OFFSET 24 +#define SM_PBBSEL_SIZE 3 +#define SM_PBBDIV_OFFSET 31 +#define SM_PBBDIV_SIZE 1 + +/* Bitfields in PM_CPU_MASK */ + +/* Bitfields in PM_HSB_MASK */ + +/* Bitfields in PM_PBA_MASK */ + +/* Bitfields in PM_PBB_MASK */ + +/* Bitfields in PM_PLL0 */ +#define SM_PLLEN_OFFSET 0 +#define SM_PLLEN_SIZE 1 +#define SM_PLLOSC_OFFSET 1 +#define SM_PLLOSC_SIZE 1 +#define SM_PLLOPT_OFFSET 2 +#define SM_PLLOPT_SIZE 3 +#define SM_PLLDIV_OFFSET 8 +#define SM_PLLDIV_SIZE 8 +#define SM_PLLMUL_OFFSET 16 +#define SM_PLLMUL_SIZE 8 +#define SM_PLLCOUNT_OFFSET 24 +#define SM_PLLCOUNT_SIZE 6 +#define SM_PLLTEST_OFFSET 31 +#define SM_PLLTEST_SIZE 1 + +/* Bitfields in PM_PLL1 */ + +/* Bitfields in PM_VCTRL */ +#define SM_VAUTO_OFFSET 0 +#define SM_VAUTO_SIZE 1 +#define SM_PM_VCTRL_VAL_OFFSET 8 +#define SM_PM_VCTRL_VAL_SIZE 7 + +/* Bitfields in PM_VMREF */ +#define SM_REFSEL_OFFSET 0 +#define SM_REFSEL_SIZE 4 + +/* Bitfields in PM_VMV */ +#define SM_PM_VMV_VAL_OFFSET 0 +#define SM_PM_VMV_VAL_SIZE 8 + +/* Bitfields in PM_IER */ + +/* Bitfields in PM_IDR */ + +/* Bitfields in PM_IMR */ + +/* Bitfields in PM_ISR */ + +/* Bitfields in PM_ICR */ +#define SM_LOCK0_OFFSET 0 +#define SM_LOCK0_SIZE 1 +#define SM_LOCK1_OFFSET 1 +#define SM_LOCK1_SIZE 1 +#define SM_WAKE_OFFSET 2 +#define SM_WAKE_SIZE 1 +#define SM_VOK_OFFSET 3 +#define SM_VOK_SIZE 1 +#define SM_VMRDY_OFFSET 4 +#define SM_VMRDY_SIZE 1 +#define SM_CKRDY_OFFSET 5 +#define SM_CKRDY_SIZE 1 + +/* Bitfields in PM_GCCTRL */ +#define SM_OSCSEL_OFFSET 0 +#define SM_OSCSEL_SIZE 1 +#define SM_PLLSEL_OFFSET 1 +#define SM_PLLSEL_SIZE 1 +#define SM_CEN_OFFSET 2 +#define SM_CEN_SIZE 1 +#define SM_CPC_OFFSET 3 +#define SM_CPC_SIZE 1 +#define SM_DIVEN_OFFSET 4 +#define SM_DIVEN_SIZE 1 +#define SM_DIV_OFFSET 8 +#define SM_DIV_SIZE 8 + +/* Bitfields in RTC_CTRL */ +#define SM_PCLR_OFFSET 1 +#define SM_PCLR_SIZE 1 +#define SM_TOPEN_OFFSET 2 +#define SM_TOPEN_SIZE 1 +#define SM_CLKEN_OFFSET 3 +#define SM_CLKEN_SIZE 1 +#define SM_PSEL_OFFSET 8 +#define SM_PSEL_SIZE 16 + +/* Bitfields in RTC_VAL */ +#define SM_RTC_VAL_VAL_OFFSET 0 +#define SM_RTC_VAL_VAL_SIZE 31 + +/* Bitfields in RTC_TOP */ +#define SM_RTC_TOP_VAL_OFFSET 0 +#define SM_RTC_TOP_VAL_SIZE 32 + +/* Bitfields in RTC_IER */ + +/* Bitfields in RTC_IDR */ + +/* Bitfields in RTC_IMR */ + +/* Bitfields in RTC_ISR */ + +/* Bitfields in RTC_ICR */ +#define SM_TOPI_OFFSET 0 +#define SM_TOPI_SIZE 1 + +/* Bitfields in WDT_CTRL */ +#define SM_KEY_OFFSET 24 +#define SM_KEY_SIZE 8 + +/* Bitfields in WDT_CLR */ + +/* Bitfields in WDT_EXT */ + +/* Bitfields in RC_RCAUSE */ +#define SM_POR_OFFSET 0 +#define SM_POR_SIZE 1 +#define SM_BOD_OFFSET 1 +#define SM_BOD_SIZE 1 +#define SM_EXT_OFFSET 2 +#define SM_EXT_SIZE 1 +#define SM_WDT_OFFSET 3 +#define SM_WDT_SIZE 1 +#define SM_NTAE_OFFSET 4 +#define SM_NTAE_SIZE 1 +#define SM_SERP_OFFSET 5 +#define SM_SERP_SIZE 1 + +/* Bitfields in EIM_IER */ + +/* Bitfields in EIM_IDR */ + +/* Bitfields in EIM_IMR */ + +/* Bitfields in EIM_ISR */ + +/* Bitfields in EIM_ICR */ + +/* Bitfields in EIM_MODE */ + +/* Bitfields in EIM_EDGE */ +#define SM_INT0_OFFSET 0 +#define SM_INT0_SIZE 1 +#define SM_INT1_OFFSET 1 +#define SM_INT1_SIZE 1 +#define SM_INT2_OFFSET 2 +#define SM_INT2_SIZE 1 +#define SM_INT3_OFFSET 3 +#define SM_INT3_SIZE 1 + +/* Bitfields in EIM_LEVEL */ + +/* Bitfields in EIM_TEST */ +#define SM_TESTEN_OFFSET 31 +#define SM_TESTEN_SIZE 1 + +/* Bitfields in EIM_NMIC */ +#define SM_EN_OFFSET 0 +#define SM_EN_SIZE 1 + +/* Bit manipulation macros */ +#define SM_BIT(name) (1 << SM_##name##_OFFSET) +#define SM_BF(name,value) (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET) +#define SM_BFEXT(name,value) (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1)) +#define SM_BFINS(name,value,old) (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value)) + +/* Register access macros */ +#define sm_readl(port,reg) readl((port)->regs + SM_##reg) +#define sm_writel(port,reg,value) writel((value), (port)->regs + SM_##reg) + +#endif /* __ASM_AVR32_SM_H__ */ diff --git a/arch/avr32/mm/Makefile b/arch/avr32/mm/Makefile new file mode 100644 index 00000000000..0066491f90d --- /dev/null +++ b/arch/avr32/mm/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux/AVR32 kernel. +# + +obj-y += init.o clear_page.o copy_page.o dma-coherent.o +obj-y += ioremap.o cache.o fault.o tlb.o diff --git a/arch/avr32/mm/cache.c b/arch/avr32/mm/cache.c new file mode 100644 index 00000000000..450515b245a --- /dev/null +++ b/arch/avr32/mm/cache.c @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/highmem.h> +#include <linux/unistd.h> + +#include <asm/cacheflush.h> +#include <asm/cachectl.h> +#include <asm/processor.h> +#include <asm/uaccess.h> + +/* + * If you attempt to flush anything more than this, you need superuser + * privileges. The value is completely arbitrary. + */ +#define CACHEFLUSH_MAX_LEN 1024 + +void invalidate_dcache_region(void *start, size_t size) +{ + unsigned long v, begin, end, linesz; + + linesz = boot_cpu_data.dcache.linesz; + + //printk("invalidate dcache: %p + %u\n", start, size); + + /* You asked for it, you got it */ + begin = (unsigned long)start & ~(linesz - 1); + end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1); + + for (v = begin; v < end; v += linesz) + invalidate_dcache_line((void *)v); +} + +void clean_dcache_region(void *start, size_t size) +{ + unsigned long v, begin, end, linesz; + + linesz = boot_cpu_data.dcache.linesz; + begin = (unsigned long)start & ~(linesz - 1); + end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1); + + for (v = begin; v < end; v += linesz) + clean_dcache_line((void *)v); + flush_write_buffer(); +} + +void flush_dcache_region(void *start, size_t size) +{ + unsigned long v, begin, end, linesz; + + linesz = boot_cpu_data.dcache.linesz; + begin = (unsigned long)start & ~(linesz - 1); + end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1); + + for (v = begin; v < end; v += linesz) + flush_dcache_line((void *)v); + flush_write_buffer(); +} + +void invalidate_icache_region(void *start, size_t size) +{ + unsigned long v, begin, end, linesz; + + linesz = boot_cpu_data.icache.linesz; + begin = (unsigned long)start & ~(linesz - 1); + end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1); + + for (v = begin; v < end; v += linesz) + invalidate_icache_line((void *)v); +} + +static inline void __flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long v, linesz; + + linesz = boot_cpu_data.dcache.linesz; + for (v = start; v < end; v += linesz) { + clean_dcache_line((void *)v); + invalidate_icache_line((void *)v); + } + + flush_write_buffer(); +} + +/* + * This one is called after a module has been loaded. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long linesz; + + linesz = boot_cpu_data.dcache.linesz; + __flush_icache_range(start & ~(linesz - 1), + (end + linesz - 1) & ~(linesz - 1)); +} + +/* + * This one is called from do_no_page(), do_swap_page() and install_page(). + */ +void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + if (vma->vm_flags & VM_EXEC) { + void *v = kmap(page); + __flush_icache_range((unsigned long)v, (unsigned long)v + PAGE_SIZE); + kunmap(v); + } +} + +/* + * This one is used by copy_to_user_page() + */ +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) +{ + if (vma->vm_flags & VM_EXEC) + flush_icache_range(addr, addr + len); +} + +asmlinkage int sys_cacheflush(int operation, void __user *addr, size_t len) +{ + int ret; + + if (len > CACHEFLUSH_MAX_LEN) { + ret = -EPERM; + if (!capable(CAP_SYS_ADMIN)) + goto out; + } + + ret = -EFAULT; + if (!access_ok(VERIFY_WRITE, addr, len)) + goto out; + + switch (operation) { + case CACHE_IFLUSH: + flush_icache_range((unsigned long)addr, + (unsigned long)addr + len); + ret = 0; + break; + default: + ret = -EINVAL; + } + +out: + return ret; +} diff --git a/arch/avr32/mm/clear_page.S b/arch/avr32/mm/clear_page.S new file mode 100644 index 00000000000..5d70dca0069 --- /dev/null +++ b/arch/avr32/mm/clear_page.S @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/page.h> + +/* + * clear_page + * r12: P1 address (to) + */ + .text + .global clear_page +clear_page: + sub r9, r12, -PAGE_SIZE + mov r10, 0 + mov r11, 0 +0: st.d r12++, r10 + cp r12, r9 + brne 0b + mov pc, lr diff --git a/arch/avr32/mm/copy_page.S b/arch/avr32/mm/copy_page.S new file mode 100644 index 00000000000..c2b3752946b --- /dev/null +++ b/arch/avr32/mm/copy_page.S @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/page.h> + +/* + * copy_page + * + * r12 to (P1 address) + * r11 from (P1 address) + * r8-r10 scratch + */ + .text + .global copy_page +copy_page: + sub r10, r11, -(1 << PAGE_SHIFT) + /* pref r11[0] */ +1: /* pref r11[8] */ + ld.d r8, r11++ + st.d r12++, r8 + cp r11, r10 + brlo 1b + mov pc, lr diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c new file mode 100644 index 00000000000..44ab8a7bdae --- /dev/null +++ b/arch/avr32/mm/dma-coherent.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/dma-mapping.h> + +#include <asm/addrspace.h> +#include <asm/cacheflush.h> + +void dma_cache_sync(void *vaddr, size_t size, int direction) +{ + /* + * No need to sync an uncached area + */ + if (PXSEG(vaddr) == P2SEG) + return; + + switch (direction) { + case DMA_FROM_DEVICE: /* invalidate only */ + dma_cache_inv(vaddr, size); + break; + case DMA_TO_DEVICE: /* writeback only */ + dma_cache_wback(vaddr, size); + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + dma_cache_wback_inv(vaddr, size); + break; + default: + BUG(); + } +} +EXPORT_SYMBOL(dma_cache_sync); + +static struct page *__dma_alloc(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp) +{ + struct page *page, *free, *end; + int order; + + size = PAGE_ALIGN(size); + order = get_order(size); + + page = alloc_pages(gfp, order); + if (!page) + return NULL; + split_page(page, order); + + /* + * When accessing physical memory with valid cache data, we + * get a cache hit even if the virtual memory region is marked + * as uncached. + * + * Since the memory is newly allocated, there is no point in + * doing a writeback. If the previous owner cares, he should + * have flushed the cache before releasing the memory. + */ + invalidate_dcache_region(phys_to_virt(page_to_phys(page)), size); + + *handle = page_to_bus(page); + free = page + (size >> PAGE_SHIFT); + end = page + (1 << order); + + /* + * Free any unused pages + */ + while (free < end) { + __free_page(free); + free++; + } + + return page; +} + +static void __dma_free(struct device *dev, size_t size, + struct page *page, dma_addr_t handle) +{ + struct page *end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT); + + while (page < end) + __free_page(page++); +} + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp) +{ + struct page *page; + void *ret = NULL; + + page = __dma_alloc(dev, size, handle, gfp); + if (page) + ret = phys_to_uncached(page_to_phys(page)); + + return ret; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle) +{ + void *addr = phys_to_cached(uncached_to_phys(cpu_addr)); + struct page *page; + + pr_debug("dma_free_coherent addr %p (phys %08lx) size %u\n", + cpu_addr, (unsigned long)handle, (unsigned)size); + BUG_ON(!virt_addr_valid(addr)); + page = virt_to_page(addr); + __dma_free(dev, size, page, handle); +} +EXPORT_SYMBOL(dma_free_coherent); + +#if 0 +void *dma_alloc_writecombine(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp) +{ + struct page *page; + + page = __dma_alloc(dev, size, handle, gfp); + + /* Now, map the page into P3 with write-combining turned on */ + return __ioremap(page_to_phys(page), size, _PAGE_BUFFER); +} +EXPORT_SYMBOL(dma_alloc_writecombine); + +void dma_free_writecombine(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle) +{ + struct page *page; + + iounmap(cpu_addr); + + page = bus_to_page(handle); + __dma_free(dev, size, page, handle); +} +EXPORT_SYMBOL(dma_free_writecombine); +#endif diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c new file mode 100644 index 00000000000..678557260a3 --- /dev/null +++ b/arch/avr32/mm/fault.c @@ -0,0 +1,315 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on linux/arch/sh/mm/fault.c: + * Copyright (C) 1999 Niibe Yutaka + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pagemap.h> + +#include <asm/kdebug.h> +#include <asm/mmu_context.h> +#include <asm/sysreg.h> +#include <asm/uaccess.h> +#include <asm/tlb.h> + +#ifdef DEBUG +static void dump_code(unsigned long pc) +{ + char *p = (char *)pc; + char val; + int i; + + + printk(KERN_DEBUG "Code:"); + for (i = 0; i < 16; i++) { + if (__get_user(val, p + i)) + break; + printk(" %02x", val); + } + printk("\n"); +} +#endif + +#ifdef CONFIG_KPROBES +ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); + +/* Hook to register for page fault notifications */ +int register_page_fault_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); +} + +int unregister_page_fault_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); +} + +static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, + int trap, int sig) +{ + struct die_args args = { + .regs = regs, + .trapnr = trap, + }; + return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); +} +#else +static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, + int trap, int sig) +{ + return NOTIFY_DONE; +} +#endif + +/* + * This routine handles page faults. It determines the address and the + * problem, and then passes it off to one of the appropriate routines. + * + * ecr is the Exception Cause Register. Possible values are: + * 5: Page not found (instruction access) + * 6: Protection fault (instruction access) + * 12: Page not found (read access) + * 13: Page not found (write access) + * 14: Protection fault (read access) + * 15: Protection fault (write access) + */ +asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) +{ + struct task_struct *tsk; + struct mm_struct *mm; + struct vm_area_struct *vma; + const struct exception_table_entry *fixup; + unsigned long address; + unsigned long page; + int writeaccess = 0; + + if (notify_page_fault(DIE_PAGE_FAULT, regs, + ecr, SIGSEGV) == NOTIFY_STOP) + return; + + address = sysreg_read(TLBEAR); + + tsk = current; + mm = tsk->mm; + + /* + * If we're in an interrupt or have no user context, we must + * not take the fault... + */ + if (in_atomic() || !mm || regs->sr & SYSREG_BIT(GM)) + goto no_context; + + local_irq_enable(); + + down_read(&mm->mmap_sem); + + vma = find_vma(mm, address); + if (!vma) + goto bad_area; + if (vma->vm_start <= address) + goto good_area; + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto bad_area; + if (expand_stack(vma, address)) + goto bad_area; + + /* + * Ok, we have a good vm_area for this memory access, so we + * can handle it... + */ +good_area: + //pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags); + switch (ecr) { + case ECR_PROTECTION_X: + case ECR_TLB_MISS_X: + if (!(vma->vm_flags & VM_EXEC)) + goto bad_area; + break; + case ECR_PROTECTION_R: + case ECR_TLB_MISS_R: + if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) + goto bad_area; + break; + case ECR_PROTECTION_W: + case ECR_TLB_MISS_W: + if (!(vma->vm_flags & VM_WRITE)) + goto bad_area; + writeaccess = 1; + break; + default: + panic("Unhandled case %lu in do_page_fault!", ecr); + } + + /* + * If for any reason at all we couldn't handle the fault, make + * sure we exit gracefully rather than endlessly redo the + * fault. + */ +survive: + switch (handle_mm_fault(mm, vma, address, writeaccess)) { + case VM_FAULT_MINOR: + tsk->min_flt++; + break; + case VM_FAULT_MAJOR: + tsk->maj_flt++; + break; + case VM_FAULT_SIGBUS: + goto do_sigbus; + case VM_FAULT_OOM: + goto out_of_memory; + default: + BUG(); + } + + up_read(&mm->mmap_sem); + return; + + /* + * Something tried to access memory that isn't in our memory + * map. Fix it, but check if it's kernel or user first... + */ +bad_area: + pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n", + tsk->comm, tsk->pid, address, ecr); + + up_read(&mm->mmap_sem); + + if (user_mode(regs)) { + /* Hmm...we have to pass address and ecr somehow... */ + /* tsk->thread.address = address; + tsk->thread.error_code = ecr; */ +#ifdef DEBUG + show_regs(regs); + dump_code(regs->pc); + + page = sysreg_read(PTBR); + printk("ptbr = %08lx", page); + if (page) { + page = ((unsigned long *)page)[address >> 22]; + printk(" pgd = %08lx", page); + if (page & _PAGE_PRESENT) { + page &= PAGE_MASK; + address &= 0x003ff000; + page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT]; + printk(" pte = %08lx\n", page); + } + } +#endif + pr_debug("Sending SIGSEGV to PID %d...\n", + tsk->pid); + force_sig(SIGSEGV, tsk); + return; + } + +no_context: + pr_debug("No context\n"); + + /* Are we prepared to handle this kernel fault? */ + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + pr_debug("Found fixup at %08lx\n", fixup->fixup); + return; + } + + /* + * Oops. The kernel tried to access some bad page. We'll have + * to terminate things with extreme prejudice. + */ + if (address < PAGE_SIZE) + printk(KERN_ALERT + "Unable to handle kernel NULL pointer dereference"); + else + printk(KERN_ALERT + "Unable to handle kernel paging request"); + printk(" at virtual address %08lx\n", address); + printk(KERN_ALERT "pc = %08lx\n", regs->pc); + + page = sysreg_read(PTBR); + printk(KERN_ALERT "ptbr = %08lx", page); + if (page) { + page = ((unsigned long *)page)[address >> 22]; + printk(" pgd = %08lx", page); + if (page & _PAGE_PRESENT) { + page &= PAGE_MASK; + address &= 0x003ff000; + page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT]; + printk(" pte = %08lx\n", page); + } + } + die("\nOops", regs, ecr); + do_exit(SIGKILL); + + /* + * We ran out of memory, or some other thing happened to us + * that made us unable to handle the page fault gracefully. + */ +out_of_memory: + printk("Out of memory\n"); + up_read(&mm->mmap_sem); + if (current->pid == 1) { + yield(); + down_read(&mm->mmap_sem); + goto survive; + } + printk("VM: Killing process %s\n", tsk->comm); + if (user_mode(regs)) + do_exit(SIGKILL); + goto no_context; + +do_sigbus: + up_read(&mm->mmap_sem); + + /* + * Send a sigbus, regardless of whether we were in kernel or + * user mode. + */ + /* address, error_code, trap_no, ... */ +#ifdef DEBUG + show_regs(regs); + dump_code(regs->pc); +#endif + pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid); + force_sig(SIGBUS, tsk); + + /* Kernel mode? Handle exceptions or die */ + if (!user_mode(regs)) + goto no_context; +} + +asmlinkage void do_bus_error(unsigned long addr, int write_access, + struct pt_regs *regs) +{ + printk(KERN_ALERT + "Bus error at physical address 0x%08lx (%s access)\n", + addr, write_access ? "write" : "read"); + printk(KERN_INFO "DTLB dump:\n"); + dump_dtlb(); + die("Bus Error", regs, write_access); + do_exit(SIGKILL); +} + +/* + * This functionality is currently not possible to implement because + * we're using segmentation to ensure a fixed mapping of the kernel + * virtual address space. + * + * It would be possible to implement this, but it would require us to + * disable segmentation at startup and load the kernel mappings into + * the TLB like any other pages. There will be lots of trickery to + * avoid recursive invocation of the TLB miss handler, though... + */ +#ifdef CONFIG_DEBUG_PAGEALLOC +void kernel_map_pages(struct page *page, int numpages, int enable) +{ + +} +EXPORT_SYMBOL(kernel_map_pages); +#endif diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c new file mode 100644 index 00000000000..3e6c4103980 --- /dev/null +++ b/arch/avr32/mm/init.c @@ -0,0 +1,480 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/init.h> +#include <linux/initrd.h> +#include <linux/mmzone.h> +#include <linux/bootmem.h> +#include <linux/pagemap.h> +#include <linux/pfn.h> +#include <linux/nodemask.h> + +#include <asm/page.h> +#include <asm/mmu_context.h> +#include <asm/tlb.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/setup.h> +#include <asm/sections.h> + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +struct page *empty_zero_page; + +/* + * Cache of MMU context last used. + */ +unsigned long mmu_context_cache = NO_CONTEXT; + +#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) +#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) + +void show_mem(void) +{ + int total = 0, reserved = 0, cached = 0; + int slab = 0, free = 0, shared = 0; + pg_data_t *pgdat; + + printk("Mem-info:\n"); + show_free_areas(); + + for_each_online_pgdat(pgdat) { + struct page *page, *end; + + page = pgdat->node_mem_map; + end = page + pgdat->node_spanned_pages; + + do { + total++; + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (PageSlab(page)) + slab++; + else if (!page_count(page)) + free++; + else + shared += page_count(page) - 1; + page++; + } while (page < end); + } + + printk ("%d pages of RAM\n", total); + printk ("%d free pages\n", free); + printk ("%d reserved pages\n", reserved); + printk ("%d slab pages\n", slab); + printk ("%d pages shared\n", shared); + printk ("%d pages swap cached\n", cached); +} + +static void __init print_memory_map(const char *what, + struct tag_mem_range *mem) +{ + printk ("%s:\n", what); + for (; mem; mem = mem->next) { + printk (" %08lx - %08lx\n", + (unsigned long)mem->addr, + (unsigned long)(mem->addr + mem->size)); + } +} + +#define MAX_LOWMEM HIGHMEM_START +#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM) + +/* + * Sort a list of memory regions in-place by ascending address. + * + * We're using bubble sort because we only have singly linked lists + * with few elements. + */ +static void __init sort_mem_list(struct tag_mem_range **pmem) +{ + int done; + struct tag_mem_range **a, **b; + + if (!*pmem) + return; + + do { + done = 1; + a = pmem, b = &(*pmem)->next; + while (*b) { + if ((*a)->addr > (*b)->addr) { + struct tag_mem_range *tmp; + tmp = (*b)->next; + (*b)->next = *a; + *a = *b; + *b = tmp; + done = 0; + } + a = &(*a)->next; + b = &(*a)->next; + } + } while (!done); +} + +/* + * Find a free memory region large enough for storing the + * bootmem bitmap. + */ +static unsigned long __init +find_bootmap_pfn(const struct tag_mem_range *mem) +{ + unsigned long bootmap_pages, bootmap_len; + unsigned long node_pages = PFN_UP(mem->size); + unsigned long bootmap_addr = mem->addr; + struct tag_mem_range *reserved = mem_reserved; + struct tag_mem_range *ramdisk = mem_ramdisk; + unsigned long kern_start = virt_to_phys(_stext); + unsigned long kern_end = virt_to_phys(_end); + + bootmap_pages = bootmem_bootmap_pages(node_pages); + bootmap_len = bootmap_pages << PAGE_SHIFT; + + /* + * Find a large enough region without reserved pages for + * storing the bootmem bitmap. We can take advantage of the + * fact that all lists have been sorted. + * + * We have to check explicitly reserved regions as well as the + * kernel image and any RAMDISK images... + * + * Oh, and we have to make sure we don't overwrite the taglist + * since we're going to use it until the bootmem allocator is + * fully up and running. + */ + while (1) { + if ((bootmap_addr < kern_end) && + ((bootmap_addr + bootmap_len) > kern_start)) + bootmap_addr = kern_end; + + while (reserved && + (bootmap_addr >= (reserved->addr + reserved->size))) + reserved = reserved->next; + + if (reserved && + ((bootmap_addr + bootmap_len) >= reserved->addr)) { + bootmap_addr = reserved->addr + reserved->size; + continue; + } + + while (ramdisk && + (bootmap_addr >= (ramdisk->addr + ramdisk->size))) + ramdisk = ramdisk->next; + + if (!ramdisk || + ((bootmap_addr + bootmap_len) < ramdisk->addr)) + break; + + bootmap_addr = ramdisk->addr + ramdisk->size; + } + + if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size)) + return ~0UL; + + return PFN_UP(bootmap_addr); +} + +void __init setup_bootmem(void) +{ + unsigned bootmap_size; + unsigned long first_pfn, bootmap_pfn, pages; + unsigned long max_pfn, max_low_pfn; + unsigned long kern_start = virt_to_phys(_stext); + unsigned long kern_end = virt_to_phys(_end); + unsigned node = 0; + struct tag_mem_range *bank, *res; + + sort_mem_list(&mem_phys); + sort_mem_list(&mem_reserved); + + print_memory_map("Physical memory", mem_phys); + print_memory_map("Reserved memory", mem_reserved); + + nodes_clear(node_online_map); + + if (mem_ramdisk) { +#ifdef CONFIG_BLK_DEV_INITRD + initrd_start = __va(mem_ramdisk->addr); + initrd_end = initrd_start + mem_ramdisk->size; + + print_memory_map("RAMDISK images", mem_ramdisk); + if (mem_ramdisk->next) + printk(KERN_WARNING + "Warning: Only the first RAMDISK image " + "will be used\n"); + sort_mem_list(&mem_ramdisk); +#else + printk(KERN_WARNING "RAM disk image present, but " + "no initrd support in kernel!\n"); +#endif + } + + if (mem_phys->next) + printk(KERN_WARNING "Only using first memory bank\n"); + + for (bank = mem_phys; bank; bank = NULL) { + first_pfn = PFN_UP(bank->addr); + max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size); + bootmap_pfn = find_bootmap_pfn(bank); + if (bootmap_pfn > max_pfn) + panic("No space for bootmem bitmap!\n"); + + if (max_low_pfn > MAX_LOWMEM_PFN) { + max_low_pfn = MAX_LOWMEM_PFN; +#ifndef CONFIG_HIGHMEM + /* + * Lowmem is memory that can be addressed + * directly through P1/P2 + */ + printk(KERN_WARNING + "Node %u: Only %ld MiB of memory will be used.\n", + node, MAX_LOWMEM >> 20); + printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); +#else +#error HIGHMEM is not supported by AVR32 yet +#endif + } + + /* Initialize the boot-time allocator with low memory only. */ + bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn, + first_pfn, max_low_pfn); + + printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n", + node, NODE_DATA(node)->bdata, + NODE_DATA(node)->bdata->node_bootmem_map); + + /* + * Register fully available RAM pages with the bootmem + * allocator. + */ + pages = max_low_pfn - first_pfn; + free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn), + PFN_PHYS(pages)); + + /* + * Reserve space for the kernel image (if present in + * this node)... + */ + if ((kern_start >= PFN_PHYS(first_pfn)) && + (kern_start < PFN_PHYS(max_pfn))) { + printk("Node %u: Kernel image %08lx - %08lx\n", + node, kern_start, kern_end); + reserve_bootmem_node(NODE_DATA(node), kern_start, + kern_end - kern_start); + } + + /* ...the bootmem bitmap... */ + reserve_bootmem_node(NODE_DATA(node), + PFN_PHYS(bootmap_pfn), + bootmap_size); + + /* ...any RAMDISK images... */ + for (res = mem_ramdisk; res; res = res->next) { + if (res->addr > PFN_PHYS(max_pfn)) + break; + + if (res->addr >= PFN_PHYS(first_pfn)) { + printk("Node %u: RAMDISK %08lx - %08lx\n", + node, + (unsigned long)res->addr, + (unsigned long)(res->addr + res->size)); + reserve_bootmem_node(NODE_DATA(node), + res->addr, res->size); + } + } + + /* ...and any other reserved regions. */ + for (res = mem_reserved; res; res = res->next) { + if (res->addr > PFN_PHYS(max_pfn)) + break; + + if (res->addr >= PFN_PHYS(first_pfn)) { + printk("Node %u: Reserved %08lx - %08lx\n", + node, + (unsigned long)res->addr, + (unsigned long)(res->addr + res->size)); + reserve_bootmem_node(NODE_DATA(node), + res->addr, res->size); + } + } + + node_set_online(node); + } +} + +/* + * paging_init() sets up the page tables + * + * This routine also unmaps the page at virtual kernel address 0, so + * that we can trap those pesky NULL-reference errors in the kernel. + */ +void __init paging_init(void) +{ + extern unsigned long _evba; + void *zero_page; + int nid; + + /* + * Make sure we can handle exceptions before enabling + * paging. Not that we should ever _get_ any exceptions this + * early, but you never know... + */ + printk("Exception vectors start at %p\n", &_evba); + sysreg_write(EVBA, (unsigned long)&_evba); + + /* + * Since we are ready to handle exceptions now, we should let + * the CPU generate them... + */ + __asm__ __volatile__ ("csrf %0" : : "i"(SR_EM_BIT)); + + /* + * Allocate the zero page. The allocator will panic if it + * can't satisfy the request, so no need to check. + */ + zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0), + PAGE_SIZE); + + { + pgd_t *pg_dir; + int i; + + pg_dir = swapper_pg_dir; + sysreg_write(PTBR, (unsigned long)pg_dir); + + for (i = 0; i < PTRS_PER_PGD; i++) + pgd_val(pg_dir[i]) = 0; + + enable_mmu(); + printk ("CPU: Paging enabled\n"); + } + + for_each_online_node(nid) { + pg_data_t *pgdat = NODE_DATA(nid); + unsigned long zones_size[MAX_NR_ZONES]; + unsigned long low, start_pfn; + + start_pfn = pgdat->bdata->node_boot_start; + start_pfn >>= PAGE_SHIFT; + low = pgdat->bdata->node_low_pfn; + + memset(zones_size, 0, sizeof(zones_size)); + zones_size[ZONE_NORMAL] = low - start_pfn; + + printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n", + nid, start_pfn, low); + + free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL); + + printk("Node %u: mem_map starts at %p\n", + pgdat->node_id, pgdat->node_mem_map); + } + + mem_map = NODE_DATA(0)->node_mem_map; + + memset(zero_page, 0, PAGE_SIZE); + empty_zero_page = virt_to_page(zero_page); + flush_dcache_page(empty_zero_page); +} + +void __init mem_init(void) +{ + int codesize, reservedpages, datasize, initsize; + int nid, i; + + reservedpages = 0; + high_memory = NULL; + + /* this will put all low memory onto the freelists */ + for_each_online_node(nid) { + pg_data_t *pgdat = NODE_DATA(nid); + unsigned long node_pages = 0; + void *node_high_memory; + + num_physpages += pgdat->node_present_pages; + + if (pgdat->node_spanned_pages != 0) + node_pages = free_all_bootmem_node(pgdat); + + totalram_pages += node_pages; + + for (i = 0; i < node_pages; i++) + if (PageReserved(pgdat->node_mem_map + i)) + reservedpages++; + + node_high_memory = (void *)((pgdat->node_start_pfn + + pgdat->node_spanned_pages) + << PAGE_SHIFT); + if (node_high_memory > high_memory) + high_memory = node_high_memory; + } + + max_mapnr = MAP_NR(high_memory); + + codesize = (unsigned long)_etext - (unsigned long)_text; + datasize = (unsigned long)_edata - (unsigned long)_data; + initsize = (unsigned long)__init_end - (unsigned long)__init_begin; + + printk ("Memory: %luk/%luk available (%dk kernel code, " + "%dk reserved, %dk data, %dk init)\n", + (unsigned long)nr_free_pages() << (PAGE_SHIFT - 10), + totalram_pages << (PAGE_SHIFT - 10), + codesize >> 10, + reservedpages << (PAGE_SHIFT - 10), + datasize >> 10, + initsize >> 10); +} + +static inline void free_area(unsigned long addr, unsigned long end, char *s) +{ + unsigned int size = (end - addr) >> 10; + + for (; addr < end; addr += PAGE_SIZE) { + struct page *page = virt_to_page(addr); + ClearPageReserved(page); + init_page_count(page); + free_page(addr); + totalram_pages++; + } + + if (size && s) + printk(KERN_INFO "Freeing %s memory: %dK (%lx - %lx)\n", + s, size, end - (size << 10), end); +} + +void free_initmem(void) +{ + free_area((unsigned long)__init_begin, (unsigned long)__init_end, + "init"); +} + +#ifdef CONFIG_BLK_DEV_INITRD + +static int keep_initrd; + +void free_initrd_mem(unsigned long start, unsigned long end) +{ + if (!keep_initrd) + free_area(start, end, "initrd"); +} + +static int __init keepinitrd_setup(char *__unused) +{ + keep_initrd = 1; + return 1; +} + +__setup("keepinitrd", keepinitrd_setup); +#endif diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c new file mode 100644 index 00000000000..536021877df --- /dev/null +++ b/arch/avr32/mm/ioremap.c @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/vmalloc.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/addrspace.h> + +static inline int remap_area_pte(pte_t *pte, unsigned long address, + unsigned long end, unsigned long phys_addr, + pgprot_t prot) +{ + unsigned long pfn; + + pfn = phys_addr >> PAGE_SHIFT; + do { + WARN_ON(!pte_none(*pte)); + + set_pte(pte, pfn_pte(pfn, prot)); + address += PAGE_SIZE; + pfn++; + pte++; + } while (address && (address < end)); + + return 0; +} + +static inline int remap_area_pmd(pmd_t *pmd, unsigned long address, + unsigned long end, unsigned long phys_addr, + pgprot_t prot) +{ + unsigned long next; + + phys_addr -= address; + + do { + pte_t *pte = pte_alloc_kernel(pmd, address); + if (!pte) + return -ENOMEM; + + next = (address + PMD_SIZE) & PMD_MASK; + if (remap_area_pte(pte, address, next, + address + phys_addr, prot)) + return -ENOMEM; + + address = next; + pmd++; + } while (address && (address < end)); + return 0; +} + +static int remap_area_pud(pud_t *pud, unsigned long address, + unsigned long end, unsigned long phys_addr, + pgprot_t prot) +{ + unsigned long next; + + phys_addr -= address; + + do { + pmd_t *pmd = pmd_alloc(&init_mm, pud, address); + if (!pmd) + return -ENOMEM; + next = (address + PUD_SIZE) & PUD_MASK; + if (remap_area_pmd(pmd, address, next, + phys_addr + address, prot)) + return -ENOMEM; + + address = next; + pud++; + } while (address && address < end); + + return 0; +} + +static int remap_area_pages(unsigned long address, unsigned long phys_addr, + size_t size, pgprot_t prot) +{ + unsigned long end = address + size; + unsigned long next; + pgd_t *pgd; + int err = 0; + + phys_addr -= address; + + pgd = pgd_offset_k(address); + flush_cache_all(); + BUG_ON(address >= end); + + spin_lock(&init_mm.page_table_lock); + do { + pud_t *pud = pud_alloc(&init_mm, pgd, address); + + err = -ENOMEM; + if (!pud) + break; + + next = (address + PGDIR_SIZE) & PGDIR_MASK; + if (next < address || next > end) + next = end; + err = remap_area_pud(pud, address, next, + phys_addr + address, prot); + if (err) + break; + + address = next; + pgd++; + } while (address && (address < end)); + + spin_unlock(&init_mm.page_table_lock); + flush_tlb_all(); + return err; +} + +/* + * Re-map an arbitrary physical address space into the kernel virtual + * address space. Needed when the kernel wants to access physical + * memory directly. + */ +void __iomem *__ioremap(unsigned long phys_addr, size_t size, + unsigned long flags) +{ + void *addr; + struct vm_struct *area; + unsigned long offset, last_addr; + pgprot_t prot; + + /* + * Check if we can simply use the P4 segment. This area is + * uncacheable, so if caching/buffering is requested, we can't + * use it. + */ + if ((phys_addr >= P4SEG) && (flags == 0)) + return (void __iomem *)phys_addr; + + /* Don't allow wraparound or zero size */ + last_addr = phys_addr + size - 1; + if (!size || last_addr < phys_addr) + return NULL; + + /* + * XXX: When mapping regular RAM, we'd better make damn sure + * it's never used for anything else. But this is really the + * caller's responsibility... + */ + if (PHYSADDR(P2SEGADDR(phys_addr)) == phys_addr) + return (void __iomem *)P2SEGADDR(phys_addr); + + /* Mappings have to be page-aligned */ + offset = phys_addr & ~PAGE_MASK; + phys_addr &= PAGE_MASK; + size = PAGE_ALIGN(last_addr + 1) - phys_addr; + + prot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY + | _PAGE_ACCESSED | _PAGE_TYPE_SMALL | flags); + + /* + * Ok, go for it.. + */ + area = get_vm_area(size, VM_IOREMAP); + if (!area) + return NULL; + area->phys_addr = phys_addr; + addr = area->addr; + if (remap_area_pages((unsigned long)addr, phys_addr, size, prot)) { + vunmap(addr); + return NULL; + } + + return (void __iomem *)(offset + (char *)addr); +} +EXPORT_SYMBOL(__ioremap); + +void __iounmap(void __iomem *addr) +{ + struct vm_struct *p; + + if ((unsigned long)addr >= P4SEG) + return; + + p = remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr)); + if (unlikely(!p)) { + printk (KERN_ERR "iounmap: bad address %p\n", addr); + return; + } + + kfree (p); +} +EXPORT_SYMBOL(__iounmap); diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c new file mode 100644 index 00000000000..7b073052203 --- /dev/null +++ b/arch/avr32/mm/tlb.c @@ -0,0 +1,380 @@ +/* + * AVR32 TLB operations + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/mm.h> + +#include <asm/mmu_context.h> + +#define _TLBEHI_I 0x100 + +void show_dtlb_entry(unsigned int index) +{ + unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save; + unsigned long flags; + + local_irq_save(flags); + mmucr_save = sysreg_read(MMUCR); + tlbehi_save = sysreg_read(TLBEHI); + mmucr = mmucr_save & 0x13; + mmucr |= index << 14; + sysreg_write(MMUCR, mmucr); + + asm volatile("tlbr" : : : "memory"); + cpu_sync_pipeline(); + + tlbehi = sysreg_read(TLBEHI); + tlbelo = sysreg_read(TLBELO); + + printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n", + index, + (tlbehi & 0x200)?'1':'0', + (tlbelo & 0x100)?'1':'0', + (tlbehi & 0xff), + (tlbehi >> 12), (tlbelo >> 12), + (tlbelo >> 4) & 7, (tlbelo >> 2) & 3, + (tlbelo & 0x200)?'1':'0', + (tlbelo & 0x080)?'1':'0', + (tlbelo & 0x001)?'1':'0', + (tlbelo & 0x002)?'1':'0'); + + sysreg_write(MMUCR, mmucr_save); + sysreg_write(TLBEHI, tlbehi_save); + cpu_sync_pipeline(); + local_irq_restore(flags); +} + +void dump_dtlb(void) +{ + unsigned int i; + + printk("ID V G ASID VPN PFN AP SZ C B W D\n"); + for (i = 0; i < 32; i++) + show_dtlb_entry(i); +} + +static unsigned long last_mmucr; + +static inline void set_replacement_pointer(unsigned shift) +{ + unsigned long mmucr, mmucr_save; + + mmucr = mmucr_save = sysreg_read(MMUCR); + + /* Does this mapping already exist? */ + __asm__ __volatile__( + " tlbs\n" + " mfsr %0, %1" + : "=r"(mmucr) + : "i"(SYSREG_MMUCR)); + + if (mmucr & SYSREG_BIT(MMUCR_N)) { + /* Not found -- pick a not-recently-accessed entry */ + unsigned long rp; + unsigned long tlbar = sysreg_read(TLBARLO); + + rp = 32 - fls(tlbar); + if (rp == 32) { + rp = 0; + sysreg_write(TLBARLO, -1L); + } + + mmucr &= 0x13; + mmucr |= (rp << shift); + + sysreg_write(MMUCR, mmucr); + } + + last_mmucr = mmucr; +} + +static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid) +{ + unsigned long vpn; + + vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid; + sysreg_write(TLBEHI, vpn); + cpu_sync_pipeline(); + + set_replacement_pointer(14); + + sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK); + + /* Let's go */ + asm volatile("nop\n\ttlbw" : : : "memory"); + cpu_sync_pipeline(); +} + +void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + + /* ptrace may call this routine */ + if (vma && current->active_mm != vma->vm_mm) + return; + + local_irq_save(flags); + update_dtlb(address, pte, get_asid()); + local_irq_restore(flags); +} + +void __flush_tlb_page(unsigned long asid, unsigned long page) +{ + unsigned long mmucr, tlbehi; + + page |= asid; + sysreg_write(TLBEHI, page); + cpu_sync_pipeline(); + asm volatile("tlbs"); + mmucr = sysreg_read(MMUCR); + + if (!(mmucr & SYSREG_BIT(MMUCR_N))) { + unsigned long tlbarlo; + unsigned long entry; + + /* Clear the "valid" bit */ + tlbehi = sysreg_read(TLBEHI); + tlbehi &= ~_TLBEHI_VALID; + sysreg_write(TLBEHI, tlbehi); + cpu_sync_pipeline(); + + /* mark the entry as "not accessed" */ + entry = (mmucr >> 14) & 0x3f; + tlbarlo = sysreg_read(TLBARLO); + tlbarlo |= (0x80000000 >> entry); + sysreg_write(TLBARLO, tlbarlo); + + /* update the entry with valid bit clear */ + asm volatile("tlbw"); + cpu_sync_pipeline(); + } +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + if (vma->vm_mm && vma->vm_mm->context != NO_CONTEXT) { + unsigned long flags, asid; + unsigned long saved_asid = MMU_NO_ASID; + + asid = vma->vm_mm->context & MMU_CONTEXT_ASID_MASK; + page &= PAGE_MASK; + + local_irq_save(flags); + if (vma->vm_mm != current->mm) { + saved_asid = get_asid(); + set_asid(asid); + } + + __flush_tlb_page(asid, page); + + if (saved_asid != MMU_NO_ASID) + set_asid(saved_asid); + local_irq_restore(flags); + } +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + if (mm->context != NO_CONTEXT) { + unsigned long flags; + int size; + + local_irq_save(flags); + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */ + mm->context = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm); + } else { + unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK; + unsigned long saved_asid = MMU_NO_ASID; + + start &= PAGE_MASK; + end += (PAGE_SIZE - 1); + end &= PAGE_MASK; + if (mm != current->mm) { + saved_asid = get_asid(); + set_asid(asid); + } + + while (start < end) { + __flush_tlb_page(asid, start); + start += PAGE_SIZE; + } + if (saved_asid != MMU_NO_ASID) + set_asid(saved_asid); + } + local_irq_restore(flags); + } +} + +/* + * TODO: If this is only called for addresses > TASK_SIZE, we can probably + * skip the ASID stuff and just use the Global bit... + */ +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + int size; + + local_irq_save(flags); + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */ + flush_tlb_all(); + } else { + unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK; + unsigned long saved_asid = get_asid(); + + start &= PAGE_MASK; + end += (PAGE_SIZE - 1); + end &= PAGE_MASK; + set_asid(asid); + while (start < end) { + __flush_tlb_page(asid, start); + start += PAGE_SIZE; + } + set_asid(saved_asid); + } + local_irq_restore(flags); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + /* Invalidate all TLB entries of this process by getting a new ASID */ + if (mm->context != NO_CONTEXT) { + unsigned long flags; + + local_irq_save(flags); + mm->context = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm); + local_irq_restore(flags); + } +} + +void flush_tlb_all(void) +{ + unsigned long flags; + + local_irq_save(flags); + sysreg_write(MMUCR, sysreg_read(MMUCR) | SYSREG_BIT(MMUCR_I)); + local_irq_restore(flags); +} + +#ifdef CONFIG_PROC_FS + +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <linux/init.h> + +static void *tlb_start(struct seq_file *tlb, loff_t *pos) +{ + static unsigned long tlb_index; + + if (*pos >= 32) + return NULL; + + tlb_index = 0; + return &tlb_index; +} + +static void *tlb_next(struct seq_file *tlb, void *v, loff_t *pos) +{ + unsigned long *index = v; + + if (*index >= 31) + return NULL; + + ++*pos; + ++*index; + return index; +} + +static void tlb_stop(struct seq_file *tlb, void *v) +{ + +} + +static int tlb_show(struct seq_file *tlb, void *v) +{ + unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save; + unsigned long flags; + unsigned long *index = v; + + if (*index == 0) + seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n"); + + BUG_ON(*index >= 32); + + local_irq_save(flags); + mmucr_save = sysreg_read(MMUCR); + tlbehi_save = sysreg_read(TLBEHI); + mmucr = mmucr_save & 0x13; + mmucr |= *index << 14; + sysreg_write(MMUCR, mmucr); + + asm volatile("tlbr" : : : "memory"); + cpu_sync_pipeline(); + + tlbehi = sysreg_read(TLBEHI); + tlbelo = sysreg_read(TLBELO); + + sysreg_write(MMUCR, mmucr_save); + sysreg_write(TLBEHI, tlbehi_save); + cpu_sync_pipeline(); + local_irq_restore(flags); + + seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n", + *index, + (tlbehi & 0x200)?'1':'0', + (tlbelo & 0x100)?'1':'0', + (tlbehi & 0xff), + (tlbehi >> 12), (tlbelo >> 12), + (tlbelo >> 4) & 7, (tlbelo >> 2) & 3, + (tlbelo & 0x200)?'1':'0', + (tlbelo & 0x080)?'1':'0', + (tlbelo & 0x001)?'1':'0', + (tlbelo & 0x002)?'1':'0'); + + return 0; +} + +static struct seq_operations tlb_ops = { + .start = tlb_start, + .next = tlb_next, + .stop = tlb_stop, + .show = tlb_show, +}; + +static int tlb_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &tlb_ops); +} + +static struct file_operations proc_tlb_operations = { + .open = tlb_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init proctlb_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("tlb", 0, NULL); + if (entry) + entry->proc_fops = &proc_tlb_operations; + return 0; +} +late_initcall(proctlb_init); +#endif /* CONFIG_PROC_FS */ diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index a601a17cf56..f7b171b92ea 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -27,7 +27,11 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_HARDIRQS bool - default n + default y + +config GENERIC_HARDIRQS_NO__DO_IRQ + bool + default y config GENERIC_TIME bool @@ -251,6 +255,12 @@ config MB93091_NO_MB endchoice endif +config FUJITSU_MB93493 + bool "MB93493 Multimedia chip" + help + Select this option if the MB93493 multimedia chip is going to be + used. + choice prompt "GP-Relative data support" default GPREL_DATA_8 diff --git a/arch/frv/kernel/Makefile b/arch/frv/kernel/Makefile index 5a827b349b5..32db3499c46 100644 --- a/arch/frv/kernel/Makefile +++ b/arch/frv/kernel/Makefile @@ -10,15 +10,14 @@ extra-y:= head.o init_task.o vmlinux.lds obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o kernel_thread.o \ process.o traps.o ptrace.o signal.o dma.o \ sys_frv.o time.o semaphore.o setup.o frv_ksyms.o \ - debug-stub.o irq.o irq-routing.o sleep.o uaccess.o + debug-stub.o irq.o sleep.o uaccess.o obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-io.o obj-$(CONFIG_MB93091_VDK) += irq-mb93091.o -obj-$(CONFIG_MB93093_PDK) += irq-mb93093.o -obj-$(CONFIG_FUJITSU_MB93493) += irq-mb93493.o obj-$(CONFIG_PM) += pm.o cmode.o obj-$(CONFIG_MB93093_PDK) += pm-mb93093.o +obj-$(CONFIG_FUJITSU_MB93493) += irq-mb93493.o obj-$(CONFIG_SYSCTL) += sysctl.o obj-$(CONFIG_FUTEX) += futex.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/frv/kernel/irq-mb93091.c b/arch/frv/kernel/irq-mb93091.c index 1381abcd5cc..369bc0a7443 100644 --- a/arch/frv/kernel/irq-mb93091.c +++ b/arch/frv/kernel/irq-mb93091.c @@ -24,7 +24,6 @@ #include <asm/delay.h> #include <asm/irq.h> #include <asm/irc-regs.h> -#include <asm/irq-routing.h> #define __reg16(ADDR) (*(volatile unsigned short *)(ADDR)) @@ -33,83 +32,131 @@ #define __get_IFR() ({ __reg16(0xffc0000c); }) #define __clr_IFR(M) do { __reg16(0xffc0000c) = ~(M); wmb(); } while(0) -static void frv_fpga_doirq(struct irq_source *source); -static void frv_fpga_control(struct irq_group *group, int irq, int on); -/*****************************************************************************/ /* - * FPGA IRQ multiplexor + * on-motherboard FPGA PIC operations */ -static struct irq_source frv_fpga[4] = { -#define __FPGA(X, M) \ - [X] = { \ - .muxname = "fpga."#X, \ - .irqmask = M, \ - .doirq = frv_fpga_doirq, \ - } +static void frv_fpga_mask(unsigned int irq) +{ + uint16_t imr = __get_IMR(); - __FPGA(0, 0x0028), - __FPGA(1, 0x0050), - __FPGA(2, 0x1c00), - __FPGA(3, 0x6386), -}; + imr |= 1 << (irq - IRQ_BASE_FPGA); -static struct irq_group frv_fpga_irqs = { - .first_irq = IRQ_BASE_FPGA, - .control = frv_fpga_control, - .sources = { - [ 1] = &frv_fpga[3], - [ 2] = &frv_fpga[3], - [ 3] = &frv_fpga[0], - [ 4] = &frv_fpga[1], - [ 5] = &frv_fpga[0], - [ 6] = &frv_fpga[1], - [ 7] = &frv_fpga[3], - [ 8] = &frv_fpga[3], - [ 9] = &frv_fpga[3], - [10] = &frv_fpga[2], - [11] = &frv_fpga[2], - [12] = &frv_fpga[2], - [13] = &frv_fpga[3], - [14] = &frv_fpga[3], - }, -}; + __set_IMR(imr); +} +static void frv_fpga_ack(unsigned int irq) +{ + __clr_IFR(1 << (irq - IRQ_BASE_FPGA)); +} -static void frv_fpga_control(struct irq_group *group, int index, int on) +static void frv_fpga_mask_ack(unsigned int irq) { uint16_t imr = __get_IMR(); - if (on) - imr &= ~(1 << index); - else - imr |= 1 << index; + imr |= 1 << (irq - IRQ_BASE_FPGA); + __set_IMR(imr); + + __clr_IFR(1 << (irq - IRQ_BASE_FPGA)); +} + +static void frv_fpga_unmask(unsigned int irq) +{ + uint16_t imr = __get_IMR(); + + imr &= ~(1 << (irq - IRQ_BASE_FPGA)); __set_IMR(imr); } -static void frv_fpga_doirq(struct irq_source *source) +static struct irq_chip frv_fpga_pic = { + .name = "mb93091", + .ack = frv_fpga_ack, + .mask = frv_fpga_mask, + .mask_ack = frv_fpga_mask_ack, + .unmask = frv_fpga_unmask, +}; + +/* + * FPGA PIC interrupt handler + */ +static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs) { - uint16_t mask, imr; + uint16_t imr, mask = (unsigned long) _mask; imr = __get_IMR(); - mask = source->irqmask & ~imr & __get_IFR(); - if (mask) { - __set_IMR(imr | mask); - __clr_IFR(mask); - distribute_irqs(&frv_fpga_irqs, mask); - __set_IMR(imr); + mask = mask & ~imr & __get_IFR(); + + /* poll all the triggered IRQs */ + while (mask) { + int irq; + + asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask)); + irq = 31 - irq; + mask &= ~(1 << irq); + + generic_handle_irq(IRQ_BASE_FPGA + irq, regs); } + + return IRQ_HANDLED; } +/* + * define an interrupt action for each FPGA PIC output + * - use dev_id to indicate the FPGA PIC input to output mappings + */ +static struct irqaction fpga_irq[4] = { + [0] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "fpga.0", + .dev_id = (void *) 0x0028UL, + }, + [1] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "fpga.1", + .dev_id = (void *) 0x0050UL, + }, + [2] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "fpga.2", + .dev_id = (void *) 0x1c00UL, + }, + [3] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "fpga.3", + .dev_id = (void *) 0x6386UL, + } +}; + +/* + * initialise the motherboard FPGA's PIC + */ void __init fpga_init(void) { + int irq; + + /* all PIC inputs are all set to be low-level driven, apart from the + * NMI button (15) which is fixed at falling-edge + */ __set_IMR(0x7ffe); __clr_IFR(0x0000); - frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL0); - frv_irq_route_external(&frv_fpga[1], IRQ_CPU_EXTERNAL1); - frv_irq_route_external(&frv_fpga[2], IRQ_CPU_EXTERNAL2); - frv_irq_route_external(&frv_fpga[3], IRQ_CPU_EXTERNAL3); - frv_irq_set_group(&frv_fpga_irqs); + for (irq = IRQ_BASE_FPGA + 1; irq <= IRQ_BASE_FPGA + 14; irq++) + set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_level_irq); + + set_irq_chip_and_handler(IRQ_FPGA_NMI, &frv_fpga_pic, handle_edge_irq); + + /* the FPGA drives the first four external IRQ inputs on the CPU PIC */ + setup_irq(IRQ_CPU_EXTERNAL0, &fpga_irq[0]); + setup_irq(IRQ_CPU_EXTERNAL1, &fpga_irq[1]); + setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[2]); + setup_irq(IRQ_CPU_EXTERNAL3, &fpga_irq[3]); } diff --git a/arch/frv/kernel/irq-mb93093.c b/arch/frv/kernel/irq-mb93093.c index 48b2a642088..a43a2215895 100644 --- a/arch/frv/kernel/irq-mb93093.c +++ b/arch/frv/kernel/irq-mb93093.c @@ -1,6 +1,6 @@ /* irq-mb93093.c: MB93093 FPGA interrupt handling * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -24,7 +24,6 @@ #include <asm/delay.h> #include <asm/irq.h> #include <asm/irc-regs.h> -#include <asm/irq-routing.h> #define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR))) @@ -33,66 +32,102 @@ #define __get_IFR() ({ __reg16(0x02); }) #define __clr_IFR(M) do { __reg16(0x02) = ~(M); wmb(); } while(0) -static void frv_fpga_doirq(struct irq_source *source); -static void frv_fpga_control(struct irq_group *group, int irq, int on); - -/*****************************************************************************/ /* - * FPGA IRQ multiplexor + * off-CPU FPGA PIC operations */ -static struct irq_source frv_fpga[4] = { -#define __FPGA(X, M) \ - [X] = { \ - .muxname = "fpga."#X, \ - .irqmask = M, \ - .doirq = frv_fpga_doirq, \ - } +static void frv_fpga_mask(unsigned int irq) +{ + uint16_t imr = __get_IMR(); - __FPGA(0, 0x0700), -}; + imr |= 1 << (irq - IRQ_BASE_FPGA); + __set_IMR(imr); +} -static struct irq_group frv_fpga_irqs = { - .first_irq = IRQ_BASE_FPGA, - .control = frv_fpga_control, - .sources = { - [ 8] = &frv_fpga[0], - [ 9] = &frv_fpga[0], - [10] = &frv_fpga[0], - }, -}; +static void frv_fpga_ack(unsigned int irq) +{ + __clr_IFR(1 << (irq - IRQ_BASE_FPGA)); +} + +static void frv_fpga_mask_ack(unsigned int irq) +{ + uint16_t imr = __get_IMR(); + imr |= 1 << (irq - IRQ_BASE_FPGA); + __set_IMR(imr); + + __clr_IFR(1 << (irq - IRQ_BASE_FPGA)); +} -static void frv_fpga_control(struct irq_group *group, int index, int on) +static void frv_fpga_unmask(unsigned int irq) { uint16_t imr = __get_IMR(); - if (on) - imr &= ~(1 << index); - else - imr |= 1 << index; + imr &= ~(1 << (irq - IRQ_BASE_FPGA)); __set_IMR(imr); } -static void frv_fpga_doirq(struct irq_source *source) +static struct irq_chip frv_fpga_pic = { + .name = "mb93093", + .ack = frv_fpga_ack, + .mask = frv_fpga_mask, + .mask_ack = frv_fpga_mask_ack, + .unmask = frv_fpga_unmask, + .end = frv_fpga_end, +}; + +/* + * FPGA PIC interrupt handler + */ +static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs) { - uint16_t mask, imr; + uint16_t imr, mask = (unsigned long) _mask; imr = __get_IMR(); - mask = source->irqmask & ~imr & __get_IFR(); - if (mask) { - __set_IMR(imr | mask); - __clr_IFR(mask); - distribute_irqs(&frv_fpga_irqs, mask); - __set_IMR(imr); + mask = mask & ~imr & __get_IFR(); + + /* poll all the triggered IRQs */ + while (mask) { + int irq; + + asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask)); + irq = 31 - irq; + mask &= ~(1 << irq); + + generic_irq_handle(IRQ_BASE_FPGA + irq, regs); } + + return IRQ_HANDLED; } +/* + * define an interrupt action for each FPGA PIC output + * - use dev_id to indicate the FPGA PIC input to output mappings + */ +static struct irqaction fpga_irq[1] = { + [0] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED, + .mask = CPU_MASK_NONE, + .name = "fpga.0", + .dev_id = (void *) 0x0700UL, + } +}; + +/* + * initialise the motherboard FPGA's PIC + */ void __init fpga_init(void) { + int irq; + + /* all PIC inputs are all set to be edge triggered */ __set_IMR(0x0700); __clr_IFR(0x0000); - frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL2); - frv_irq_set_group(&frv_fpga_irqs); + for (irq = IRQ_BASE_FPGA + 8; irq <= IRQ_BASE_FPGA + 10; irq++) + set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_edge_irq); + + /* the FPGA drives external IRQ input #2 on the CPU PIC */ + setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[0]); } diff --git a/arch/frv/kernel/irq-mb93493.c b/arch/frv/kernel/irq-mb93493.c index 988d035640e..39c0188a349 100644 --- a/arch/frv/kernel/irq-mb93493.c +++ b/arch/frv/kernel/irq-mb93493.c @@ -1,6 +1,6 @@ /* irq-mb93493.c: MB93493 companion chip interrupt handler * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -24,84 +24,126 @@ #include <asm/delay.h> #include <asm/irq.h> #include <asm/irc-regs.h> -#include <asm/irq-routing.h> #include <asm/mb93493-irqs.h> +#include <asm/mb93493-regs.h> -static void frv_mb93493_doirq(struct irq_source *source); +#define IRQ_ROUTE_ONE(X) (X##_ROUTE << (X - IRQ_BASE_MB93493)) + +#define IRQ_ROUTING \ + (IRQ_ROUTE_ONE(IRQ_MB93493_VDC) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_VCC) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_OUT) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_I2C_0) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_I2C_1) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_USB) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_LOCAL_BUS) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_PCMCIA) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_GPIO) | \ + IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_IN)) -/*****************************************************************************/ /* - * MB93493 companion chip IRQ multiplexor + * daughter board PIC operations + * - there is no way to ACK interrupts in the MB93493 chip */ -static struct irq_source frv_mb93493[2] = { - [0] = { - .muxname = "mb93493.0", - .muxdata = __region_CS3 + 0x3d0, - .doirq = frv_mb93493_doirq, - .irqmask = 0x0000, - }, - [1] = { - .muxname = "mb93493.1", - .muxdata = __region_CS3 + 0x3d4, - .doirq = frv_mb93493_doirq, - .irqmask = 0x0000, - }, -}; - -static void frv_mb93493_control(struct irq_group *group, int index, int on) +static void frv_mb93493_mask(unsigned int irq) { - struct irq_source *source; uint32_t iqsr; + volatile void *piqsr; - if ((frv_mb93493[0].irqmask & (1 << index))) - source = &frv_mb93493[0]; + if (IRQ_ROUTING & (1 << (irq - IRQ_BASE_MB93493))) + piqsr = __addr_MB93493_IQSR(1); else - source = &frv_mb93493[1]; + piqsr = __addr_MB93493_IQSR(0); + + iqsr = readl(piqsr); + iqsr &= ~(1 << (irq - IRQ_BASE_MB93493 + 16)); + writel(iqsr, piqsr); +} - iqsr = readl(source->muxdata); - if (on) - iqsr |= 1 << (index + 16); +static void frv_mb93493_ack(unsigned int irq) +{ +} + +static void frv_mb93493_unmask(unsigned int irq) +{ + uint32_t iqsr; + volatile void *piqsr; + + if (IRQ_ROUTING & (1 << (irq - IRQ_BASE_MB93493))) + piqsr = __addr_MB93493_IQSR(1); else - iqsr &= ~(1 << (index + 16)); + piqsr = __addr_MB93493_IQSR(0); - writel(iqsr, source->muxdata); + iqsr = readl(piqsr); + iqsr |= 1 << (irq - IRQ_BASE_MB93493 + 16); + writel(iqsr, piqsr); } -static struct irq_group frv_mb93493_irqs = { - .first_irq = IRQ_BASE_MB93493, - .control = frv_mb93493_control, +static struct irq_chip frv_mb93493_pic = { + .name = "mb93093", + .ack = frv_mb93493_ack, + .mask = frv_mb93493_mask, + .mask_ack = frv_mb93493_mask, + .unmask = frv_mb93493_unmask, }; -static void frv_mb93493_doirq(struct irq_source *source) +/* + * MB93493 PIC interrupt handler + */ +static irqreturn_t mb93493_interrupt(int irq, void *_piqsr, struct pt_regs *regs) { - uint32_t mask = readl(source->muxdata); - mask = mask & (mask >> 16) & 0xffff; + volatile void *piqsr = _piqsr; + uint32_t iqsr; - if (mask) - distribute_irqs(&frv_mb93493_irqs, mask); -} + iqsr = readl(piqsr); + iqsr = iqsr & (iqsr >> 16) & 0xffff; -static void __init mb93493_irq_route(int irq, int source) -{ - frv_mb93493[source].irqmask |= 1 << (irq - IRQ_BASE_MB93493); - frv_mb93493_irqs.sources[irq - IRQ_BASE_MB93493] = &frv_mb93493[source]; + /* poll all the triggered IRQs */ + while (iqsr) { + int irq; + + asm("scan %1,gr0,%0" : "=r"(irq) : "r"(iqsr)); + irq = 31 - irq; + iqsr &= ~(1 << irq); + + generic_handle_irq(IRQ_BASE_MB93493 + irq, regs); + } + + return IRQ_HANDLED; } -void __init route_mb93493_irqs(void) +/* + * define an interrupt action for each MB93493 PIC output + * - use dev_id to indicate the MB93493 PIC input to output mappings + */ +static struct irqaction mb93493_irq[2] = { + [0] = { + .handler = mb93493_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "mb93493.0", + .dev_id = (void *) __addr_MB93493_IQSR(0), + }, + [1] = { + .handler = mb93493_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "mb93493.1", + .dev_id = (void *) __addr_MB93493_IQSR(1), + } +}; + +/* + * initialise the motherboard MB93493's PIC + */ +void __init mb93493_init(void) { - frv_irq_route_external(&frv_mb93493[0], IRQ_CPU_MB93493_0); - frv_irq_route_external(&frv_mb93493[1], IRQ_CPU_MB93493_1); - - frv_irq_set_group(&frv_mb93493_irqs); - - mb93493_irq_route(IRQ_MB93493_VDC, IRQ_MB93493_VDC_ROUTE); - mb93493_irq_route(IRQ_MB93493_VCC, IRQ_MB93493_VCC_ROUTE); - mb93493_irq_route(IRQ_MB93493_AUDIO_IN, IRQ_MB93493_AUDIO_IN_ROUTE); - mb93493_irq_route(IRQ_MB93493_I2C_0, IRQ_MB93493_I2C_0_ROUTE); - mb93493_irq_route(IRQ_MB93493_I2C_1, IRQ_MB93493_I2C_1_ROUTE); - mb93493_irq_route(IRQ_MB93493_USB, IRQ_MB93493_USB_ROUTE); - mb93493_irq_route(IRQ_MB93493_LOCAL_BUS, IRQ_MB93493_LOCAL_BUS_ROUTE); - mb93493_irq_route(IRQ_MB93493_PCMCIA, IRQ_MB93493_PCMCIA_ROUTE); - mb93493_irq_route(IRQ_MB93493_GPIO, IRQ_MB93493_GPIO_ROUTE); - mb93493_irq_route(IRQ_MB93493_AUDIO_OUT, IRQ_MB93493_AUDIO_OUT_ROUTE); + int irq; + + for (irq = IRQ_BASE_MB93493 + 0; irq <= IRQ_BASE_MB93493 + 10; irq++) + set_irq_chip_and_handler(irq, &frv_mb93493_pic, handle_edge_irq); + + /* the MB93493 drives external IRQ inputs on the CPU PIC */ + setup_irq(IRQ_CPU_MB93493_0, &mb93493_irq[0]); + setup_irq(IRQ_CPU_MB93493_1, &mb93493_irq[1]); } diff --git a/arch/frv/kernel/irq-routing.c b/arch/frv/kernel/irq-routing.c deleted file mode 100644 index 53886adf47d..00000000000 --- a/arch/frv/kernel/irq-routing.c +++ /dev/null @@ -1,291 +0,0 @@ -/* irq-routing.c: IRQ routing - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sched.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/serial_reg.h> -#include <asm/io.h> -#include <asm/irq-routing.h> -#include <asm/irc-regs.h> -#include <asm/serial-regs.h> -#include <asm/dma.h> - -struct irq_level frv_irq_levels[16] = { - [0 ... 15] = { - .lock = SPIN_LOCK_UNLOCKED, - } -}; - -struct irq_group *irq_groups[NR_IRQ_GROUPS]; - -extern struct irq_group frv_cpu_irqs; - -void __init frv_irq_route(struct irq_source *source, int irqlevel) -{ - source->level = &frv_irq_levels[irqlevel]; - source->next = frv_irq_levels[irqlevel].sources; - frv_irq_levels[irqlevel].sources = source; -} - -void __init frv_irq_route_external(struct irq_source *source, int irq) -{ - int irqlevel = 0; - - switch (irq) { - case IRQ_CPU_EXTERNAL0: irqlevel = IRQ_XIRQ0_LEVEL; break; - case IRQ_CPU_EXTERNAL1: irqlevel = IRQ_XIRQ1_LEVEL; break; - case IRQ_CPU_EXTERNAL2: irqlevel = IRQ_XIRQ2_LEVEL; break; - case IRQ_CPU_EXTERNAL3: irqlevel = IRQ_XIRQ3_LEVEL; break; - case IRQ_CPU_EXTERNAL4: irqlevel = IRQ_XIRQ4_LEVEL; break; - case IRQ_CPU_EXTERNAL5: irqlevel = IRQ_XIRQ5_LEVEL; break; - case IRQ_CPU_EXTERNAL6: irqlevel = IRQ_XIRQ6_LEVEL; break; - case IRQ_CPU_EXTERNAL7: irqlevel = IRQ_XIRQ7_LEVEL; break; - default: BUG(); - } - - source->level = &frv_irq_levels[irqlevel]; - source->next = frv_irq_levels[irqlevel].sources; - frv_irq_levels[irqlevel].sources = source; -} - -void __init frv_irq_set_group(struct irq_group *group) -{ - irq_groups[group->first_irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP] = group; -} - -void distribute_irqs(struct irq_group *group, unsigned long irqmask) -{ - struct irqaction *action; - int irq; - - while (irqmask) { - asm("scan %1,gr0,%0" : "=r"(irq) : "r"(irqmask)); - if (irq < 0 || irq > 31) - asm volatile("break"); - irq = 31 - irq; - - irqmask &= ~(1 << irq); - action = group->actions[irq]; - - irq += group->first_irq; - - if (action) { - int status = 0; - -// if (!(action->flags & IRQF_DISABLED)) -// local_irq_enable(); - - do { - status |= action->flags; - action->handler(irq, action->dev_id, __frame); - action = action->next; - } while (action); - - if (status & IRQF_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - local_irq_disable(); - } - } -} - -/*****************************************************************************/ -/* - * CPU UART interrupts - */ -static void frv_cpuuart_doirq(struct irq_source *source) -{ -// uint8_t iir = readb(source->muxdata + UART_IIR * 8); -// if ((iir & 0x0f) != UART_IIR_NO_INT) - distribute_irqs(&frv_cpu_irqs, source->irqmask); -} - -struct irq_source frv_cpuuart[2] = { -#define __CPUUART(X, A) \ - [X] = { \ - .muxname = "uart", \ - .muxdata = (volatile void __iomem *)(unsigned long)A,\ - .irqmask = 1 << IRQ_CPU_UART##X, \ - .doirq = frv_cpuuart_doirq, \ - } - - __CPUUART(0, UART0_BASE), - __CPUUART(1, UART1_BASE), -}; - -/*****************************************************************************/ -/* - * CPU DMA interrupts - */ -static void frv_cpudma_doirq(struct irq_source *source) -{ - uint32_t cstr = readl(source->muxdata + DMAC_CSTRx); - if (cstr & DMAC_CSTRx_INT) - distribute_irqs(&frv_cpu_irqs, source->irqmask); -} - -struct irq_source frv_cpudma[8] = { -#define __CPUDMA(X, A) \ - [X] = { \ - .muxname = "dma", \ - .muxdata = (volatile void __iomem *)(unsigned long)A,\ - .irqmask = 1 << IRQ_CPU_DMA##X, \ - .doirq = frv_cpudma_doirq, \ - } - - __CPUDMA(0, 0xfe000900), - __CPUDMA(1, 0xfe000980), - __CPUDMA(2, 0xfe000a00), - __CPUDMA(3, 0xfe000a80), - __CPUDMA(4, 0xfe001000), - __CPUDMA(5, 0xfe001080), - __CPUDMA(6, 0xfe001100), - __CPUDMA(7, 0xfe001180), -}; - -/*****************************************************************************/ -/* - * CPU timer interrupts - can't tell whether they've generated an interrupt or not - */ -static void frv_cputimer_doirq(struct irq_source *source) -{ - distribute_irqs(&frv_cpu_irqs, source->irqmask); -} - -struct irq_source frv_cputimer[3] = { -#define __CPUTIMER(X) \ - [X] = { \ - .muxname = "timer", \ - .muxdata = NULL, \ - .irqmask = 1 << IRQ_CPU_TIMER##X, \ - .doirq = frv_cputimer_doirq, \ - } - - __CPUTIMER(0), - __CPUTIMER(1), - __CPUTIMER(2), -}; - -/*****************************************************************************/ -/* - * external CPU interrupts - can't tell directly whether they've generated an interrupt or not - */ -static void frv_cpuexternal_doirq(struct irq_source *source) -{ - distribute_irqs(&frv_cpu_irqs, source->irqmask); -} - -struct irq_source frv_cpuexternal[8] = { -#define __CPUEXTERNAL(X) \ - [X] = { \ - .muxname = "ext", \ - .muxdata = NULL, \ - .irqmask = 1 << IRQ_CPU_EXTERNAL##X, \ - .doirq = frv_cpuexternal_doirq, \ - } - - __CPUEXTERNAL(0), - __CPUEXTERNAL(1), - __CPUEXTERNAL(2), - __CPUEXTERNAL(3), - __CPUEXTERNAL(4), - __CPUEXTERNAL(5), - __CPUEXTERNAL(6), - __CPUEXTERNAL(7), -}; - -#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16)) - -struct irq_group frv_cpu_irqs = { - .sources = { - [IRQ_CPU_UART0] = &frv_cpuuart[0], - [IRQ_CPU_UART1] = &frv_cpuuart[1], - [IRQ_CPU_TIMER0] = &frv_cputimer[0], - [IRQ_CPU_TIMER1] = &frv_cputimer[1], - [IRQ_CPU_TIMER2] = &frv_cputimer[2], - [IRQ_CPU_DMA0] = &frv_cpudma[0], - [IRQ_CPU_DMA1] = &frv_cpudma[1], - [IRQ_CPU_DMA2] = &frv_cpudma[2], - [IRQ_CPU_DMA3] = &frv_cpudma[3], - [IRQ_CPU_DMA4] = &frv_cpudma[4], - [IRQ_CPU_DMA5] = &frv_cpudma[5], - [IRQ_CPU_DMA6] = &frv_cpudma[6], - [IRQ_CPU_DMA7] = &frv_cpudma[7], - [IRQ_CPU_EXTERNAL0] = &frv_cpuexternal[0], - [IRQ_CPU_EXTERNAL1] = &frv_cpuexternal[1], - [IRQ_CPU_EXTERNAL2] = &frv_cpuexternal[2], - [IRQ_CPU_EXTERNAL3] = &frv_cpuexternal[3], - [IRQ_CPU_EXTERNAL4] = &frv_cpuexternal[4], - [IRQ_CPU_EXTERNAL5] = &frv_cpuexternal[5], - [IRQ_CPU_EXTERNAL6] = &frv_cpuexternal[6], - [IRQ_CPU_EXTERNAL7] = &frv_cpuexternal[7], - }, -}; - -/*****************************************************************************/ -/* - * route the CPU's interrupt sources - */ -void __init route_cpu_irqs(void) -{ - frv_irq_set_group(&frv_cpu_irqs); - - __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 IRQ detect levels */ - __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 IRQ detect levels */ - - /* route UART and error interrupts */ - frv_irq_route(&frv_cpuuart[0], IRQ_UART0_LEVEL); - frv_irq_route(&frv_cpuuart[1], IRQ_UART1_LEVEL); - - set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL, IRQ_UART1_LEVEL, IRQ_UART0_LEVEL); - - /* route DMA channel interrupts */ - frv_irq_route(&frv_cpudma[0], IRQ_DMA0_LEVEL); - frv_irq_route(&frv_cpudma[1], IRQ_DMA1_LEVEL); - frv_irq_route(&frv_cpudma[2], IRQ_DMA2_LEVEL); - frv_irq_route(&frv_cpudma[3], IRQ_DMA3_LEVEL); - frv_irq_route(&frv_cpudma[4], IRQ_DMA4_LEVEL); - frv_irq_route(&frv_cpudma[5], IRQ_DMA5_LEVEL); - frv_irq_route(&frv_cpudma[6], IRQ_DMA6_LEVEL); - frv_irq_route(&frv_cpudma[7], IRQ_DMA7_LEVEL); - - set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL, IRQ_DMA0_LEVEL); - set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL, IRQ_DMA4_LEVEL); - - /* route timer interrupts */ - frv_irq_route(&frv_cputimer[0], IRQ_TIMER0_LEVEL); - frv_irq_route(&frv_cputimer[1], IRQ_TIMER1_LEVEL); - frv_irq_route(&frv_cputimer[2], IRQ_TIMER2_LEVEL); - - set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL); - - /* route external interrupts */ - frv_irq_route(&frv_cpuexternal[0], IRQ_XIRQ0_LEVEL); - frv_irq_route(&frv_cpuexternal[1], IRQ_XIRQ1_LEVEL); - frv_irq_route(&frv_cpuexternal[2], IRQ_XIRQ2_LEVEL); - frv_irq_route(&frv_cpuexternal[3], IRQ_XIRQ3_LEVEL); - frv_irq_route(&frv_cpuexternal[4], IRQ_XIRQ4_LEVEL); - frv_irq_route(&frv_cpuexternal[5], IRQ_XIRQ5_LEVEL); - frv_irq_route(&frv_cpuexternal[6], IRQ_XIRQ6_LEVEL); - frv_irq_route(&frv_cpuexternal[7], IRQ_XIRQ7_LEVEL); - - set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL, IRQ_XIRQ4_LEVEL); - set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL, IRQ_XIRQ0_LEVEL); - -#if defined(CONFIG_MB93091_VDK) - __set_TM1(0x55550000); /* XIRQ7-0 all active low */ -#elif defined(CONFIG_MB93093_PDK) - __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */ -#else -#error dont know external IRQ trigger levels for this setup -#endif - -} /* end route_cpu_irqs() */ diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c index 08967010be0..5ac041c7c0a 100644 --- a/arch/frv/kernel/irq.c +++ b/arch/frv/kernel/irq.c @@ -1,6 +1,6 @@ /* irq.c: FRV IRQ handling * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -9,13 +9,6 @@ * 2 of the License, or (at your option) any later version. */ -/* - * (mostly architecture independent, will move to kernel/irq.c in 2.5.) - * - * IRQs are in fact implemented a bit like signal handlers for the kernel. - * Naturally it's not a 1:1 relation, but there are similarities. - */ - #include <linux/ptrace.h> #include <linux/errno.h> #include <linux/signal.h> @@ -43,19 +36,16 @@ #include <asm/delay.h> #include <asm/irq.h> #include <asm/irc-regs.h> -#include <asm/irq-routing.h> #include <asm/gdb-stub.h> -extern void __init fpga_init(void); -extern void __init route_mb93493_irqs(void); - -static void register_irq_proc (unsigned int irq); +#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16)) -/* - * Special irq handlers. - */ +extern void __init fpga_init(void); +#ifdef CONFIG_FUJITSU_MB93493 +extern void __init mb93493_init(void); +#endif -irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) { return IRQ_HANDLED; } +#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR)) atomic_t irq_err_count; @@ -64,215 +54,86 @@ atomic_t irq_err_count; */ int show_interrupts(struct seq_file *p, void *v) { - struct irqaction *action; - struct irq_group *group; + int i = *(loff_t *) v, cpu; + struct irqaction * action; unsigned long flags; - int level, grp, ix, i, j; - - i = *(loff_t *) v; - - switch (i) { - case 0: - seq_printf(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%d ",j); - - seq_putc(p, '\n'); - break; - case 1 ... NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP: - local_irq_save(flags); - - grp = (i - 1) / NR_IRQ_ACTIONS_PER_GROUP; - group = irq_groups[grp]; - if (!group) - goto skip; - - ix = (i - 1) % NR_IRQ_ACTIONS_PER_GROUP; - action = group->actions[ix]; - if (!action) - goto skip; - - seq_printf(p, "%3d: ", i - 1); - -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i - 1]); -#endif - - level = group->sources[ix]->level - frv_irq_levels; - - seq_printf(p, " %12s@%x", group->sources[ix]->muxname, level); - seq_printf(p, " %s", action->name); - - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); + if (i == 0) { + char cpuname[12]; + seq_printf(p, " "); + for_each_present_cpu(cpu) { + sprintf(cpuname, "CPU%d", cpu); + seq_printf(p, " %10s", cpuname); + } seq_putc(p, '\n'); -skip: - local_irq_restore(flags); - break; + } - case NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP + 1: - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); - break; + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (action) { + seq_printf(p, "%3d: ", i); + for_each_present_cpu(cpu) + seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]); + seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-"); + seq_printf(p, " %s", action->name); + for (action = action->next; + action; + action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); + } - default: - break; + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); } return 0; } - /* - * Generic enable/disable code: this just calls - * down into the PIC-specific version for the actual - * hardware disable after having gotten the irq - * controller lock. + * on-CPU PIC operations */ - -/** - * disable_irq_nosync - disable an irq without waiting - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables and Enables are - * nested. - * Unlike disable_irq(), this function does not ensure existing - * instances of the IRQ handler have completed before returning. - * - * This function may be called from IRQ context. - */ - -void disable_irq_nosync(unsigned int irq) +static void frv_cpupic_ack(unsigned int irqlevel) { - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - unsigned long flags; - int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1); - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[idx]; - if (!source) - BUG(); - - level = source->level; - - spin_lock_irqsave(&level->lock, flags); - - if (group->control) { - if (!group->disable_cnt[idx]++) - group->control(group, idx, 0); - } else if (!level->disable_count++) { - __set_MASK(level - frv_irq_levels); - } - - spin_unlock_irqrestore(&level->lock, flags); + __clr_RC(irqlevel); + __clr_IRL(); } -EXPORT_SYMBOL(disable_irq_nosync); - -/** - * disable_irq - disable an irq and wait for completion - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Enables and Disables are - * nested. - * This function waits for any pending IRQ handlers for this interrupt - * to complete before returning. If you use this function while - * holding a resource the IRQ handler may need you will deadlock. - * - * This function may be called - with care - from IRQ context. - */ - -void disable_irq(unsigned int irq) +static void frv_cpupic_mask(unsigned int irqlevel) { - disable_irq_nosync(irq); - -#ifdef CONFIG_SMP - if (!local_irq_count(smp_processor_id())) { - do { - barrier(); - } while (irq_desc[irq].status & IRQ_INPROGRESS); - } -#endif + __set_MASK(irqlevel); } -EXPORT_SYMBOL(disable_irq); - -/** - * enable_irq - enable handling of an irq - * @irq: Interrupt to enable - * - * Undoes the effect of one call to disable_irq(). If this - * matches the last disable, processing of interrupts on this - * IRQ line is re-enabled. - * - * This function may be called from IRQ context. - */ - -void enable_irq(unsigned int irq) +static void frv_cpupic_mask_ack(unsigned int irqlevel) { - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - unsigned long flags; - int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1); - int count; - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[idx]; - if (!source) - BUG(); - - level = source->level; - - spin_lock_irqsave(&level->lock, flags); - - if (group->control) - count = group->disable_cnt[idx]; - else - count = level->disable_count; - - switch (count) { - case 1: - if (group->control) { - if (group->actions[idx]) - group->control(group, idx, 1); - } else { - if (level->usage) - __clr_MASK(level - frv_irq_levels); - } - /* fall-through */ - - default: - count--; - break; - - case 0: - printk("enable_irq(%u) unbalanced from %p\n", irq, __builtin_return_address(0)); - } + __set_MASK(irqlevel); + __clr_RC(irqlevel); + __clr_IRL(); +} - if (group->control) - group->disable_cnt[idx] = count; - else - level->disable_count = count; +static void frv_cpupic_unmask(unsigned int irqlevel) +{ + __clr_MASK(irqlevel); +} - spin_unlock_irqrestore(&level->lock, flags); +static void frv_cpupic_end(unsigned int irqlevel) +{ + __clr_MASK(irqlevel); } -EXPORT_SYMBOL(enable_irq); +static struct irq_chip frv_cpu_pic = { + .name = "cpu", + .ack = frv_cpupic_ack, + .mask = frv_cpupic_mask, + .mask_ack = frv_cpupic_mask_ack, + .unmask = frv_cpupic_unmask, + .end = frv_cpupic_end, +}; -/*****************************************************************************/ /* * handles all normal device IRQ's * - registers are referred to by the __frame variable (GR28) @@ -281,463 +142,65 @@ EXPORT_SYMBOL(enable_irq); */ asmlinkage void do_IRQ(void) { - struct irq_source *source; - int level, cpu; - irq_enter(); - - level = (__frame->tbr >> 4) & 0xf; - cpu = smp_processor_id(); - - if ((unsigned long) __frame - (unsigned long) (current + 1) < 512) - BUG(); - - __set_MASK(level); - __clr_RC(level); - __clr_IRL(); - - kstat_this_cpu.irqs[level]++; - - for (source = frv_irq_levels[level].sources; source; source = source->next) - source->doirq(source); - - __clr_MASK(level); - + generic_handle_irq(__get_IRL(), __frame); irq_exit(); +} -} /* end do_IRQ() */ - -/*****************************************************************************/ /* * handles all NMIs when not co-opted by the debugger * - registers are referred to by the __frame variable (GR28) */ asmlinkage void do_NMI(void) { -} /* end do_NMI() */ - -/*****************************************************************************/ -/** - * request_irq - allocate an interrupt line - * @irq: Interrupt line to allocate - * @handler: Function to be called when the IRQ occurs - * @irqflags: Interrupt type flags - * @devname: An ascii name for the claiming device - * @dev_id: A cookie passed back to the handler function - * - * This call allocates interrupt resources and enables the - * interrupt line and IRQ handling. From the point this - * call is made your handler function may be invoked. Since - * your handler function must clear any interrupt the board - * raises, you must take care both to initialise your hardware - * and to set up the interrupt handler in the right order. - * - * Dev_id must be globally unique. Normally the address of the - * device data structure is used as the cookie. Since the handler - * receives this value it makes sense to use it. - * - * If your interrupt is shared you must pass a non NULL dev_id - * as this is required when freeing the interrupt. - * - * Flags: - * - * IRQF_SHARED Interrupt is shared - * - * IRQF_DISABLED Disable local interrupts while processing - * - * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy - * - */ - -int request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id) -{ - int retval; - struct irqaction *action; - -#if 1 - /* - * Sanity-check: shared interrupts should REALLY pass in - * a real dev-ID, otherwise we'll have trouble later trying - * to figure out which interrupt is which (messes up the - * interrupt freeing logic etc). - */ - if (irqflags & IRQF_SHARED) { - if (!dev_id) - printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", - devname, (&irq)[-1]); - } -#endif - - if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS) - return -EINVAL; - if (!handler) - return -EINVAL; - - action = (struct irqaction *) kmalloc(sizeof(struct irqaction), GFP_KERNEL); - if (!action) - return -ENOMEM; - - action->handler = handler; - action->flags = irqflags; - action->mask = CPU_MASK_NONE; - action->name = devname; - action->next = NULL; - action->dev_id = dev_id; - - retval = setup_irq(irq, action); - if (retval) - kfree(action); - return retval; -} - -EXPORT_SYMBOL(request_irq); - -/** - * free_irq - free an interrupt - * @irq: Interrupt line to free - * @dev_id: Device identity to free - * - * Remove an interrupt handler. The handler is removed and if the - * interrupt line is no longer in use by any driver it is disabled. - * On a shared IRQ the caller must ensure the interrupt is disabled - * on the card it drives before calling this function. The function - * does not return until any executing interrupts for this IRQ - * have completed. - * - * This function may be called from interrupt context. - * - * Bugs: Attempting to free an irq in a handler for the same irq hangs - * the machine. - */ - -void free_irq(unsigned int irq, void *dev_id) -{ - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - struct irqaction **p, **pp; - unsigned long flags; - - if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS) - return; - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - if (!source) - BUG(); - - level = source->level; - p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - - spin_lock_irqsave(&level->lock, flags); - - for (pp = p; *pp; pp = &(*pp)->next) { - struct irqaction *action = *pp; - - if (action->dev_id != dev_id) - continue; - - /* found it - remove from the list of entries */ - *pp = action->next; - - level->usage--; - - if (p == pp && group->control) - group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 0); - - if (level->usage == 0) - __set_MASK(level - frv_irq_levels); - - spin_unlock_irqrestore(&level->lock,flags); - -#ifdef CONFIG_SMP - /* Wait to make sure it's not being used on another CPU */ - while (desc->status & IRQ_INPROGRESS) - barrier(); -#endif - kfree(action); - return; - } -} - -EXPORT_SYMBOL(free_irq); - -/* - * IRQ autodetection code.. - * - * This depends on the fact that any interrupt that comes in on to an - * unassigned IRQ will cause GxICR_DETECT to be set - */ - -static DECLARE_MUTEX(probe_sem); - -/** - * probe_irq_on - begin an interrupt autodetect - * - * Commence probing for an interrupt. The interrupts are scanned - * and a mask of potential interrupt lines is returned. - * - */ - -unsigned long probe_irq_on(void) -{ - down(&probe_sem); - return 0; } -EXPORT_SYMBOL(probe_irq_on); - /* - * Return a mask of triggered interrupts (this - * can handle only legacy ISA interrupts). - */ - -/** - * probe_irq_mask - scan a bitmap of interrupt lines - * @val: mask of interrupts to consider - * - * Scan the ISA bus interrupt lines and return a bitmap of - * active interrupts. The interrupt probe logic state is then - * returned to its previous value. - * - * Note: we need to scan all the irq's even though we will - * only return ISA irq numbers - just so that we reset them - * all to a known state. - */ -unsigned int probe_irq_mask(unsigned long xmask) -{ - up(&probe_sem); - return 0; -} - -EXPORT_SYMBOL(probe_irq_mask); - -/* - * Return the one interrupt that triggered (this can - * handle any interrupt source). - */ - -/** - * probe_irq_off - end an interrupt autodetect - * @xmask: mask of potential interrupts (unused) - * - * Scans the unused interrupt lines and returns the line which - * appears to have triggered the interrupt. If no interrupt was - * found then zero is returned. If more than one interrupt is - * found then minus the first candidate is returned to indicate - * their is doubt. - * - * The interrupt probe logic state is returned to its previous - * value. - * - * BUGS: When used in a module (which arguably shouldnt happen) - * nothing prevents two IRQ probe callers from overlapping. The - * results of this are non-optimal. + * initialise the interrupt system */ - -int probe_irq_off(unsigned long xmask) -{ - up(&probe_sem); - return -1; -} - -EXPORT_SYMBOL(probe_irq_off); - -/* this was setup_x86_irq but it seems pretty generic */ -int setup_irq(unsigned int irq, struct irqaction *new) -{ - struct irq_source *source; - struct irq_group *group; - struct irq_level *level; - struct irqaction **p, **pp; - unsigned long flags; - - group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP]; - if (!group) - BUG(); - - source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - if (!source) - BUG(); - - level = source->level; - - p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)]; - - /* - * Some drivers like serial.c use request_irq() heavily, - * so we have to be careful not to interfere with a - * running system. - */ - if (new->flags & IRQF_SAMPLE_RANDOM) { - /* - * This function might sleep, we want to call it first, - * outside of the atomic block. - * Yes, this might clear the entropy pool if the wrong - * driver is attempted to be loaded, without actually - * installing a new handler, but is this really a problem, - * only the sysadmin is able to do this. - */ - rand_initialize_irq(irq); - } - - /* must juggle the interrupt processing stuff with interrupts disabled */ - spin_lock_irqsave(&level->lock, flags); - - /* can't share interrupts unless all parties agree to */ - if (level->usage != 0 && !(level->flags & new->flags & IRQF_SHARED)) { - spin_unlock_irqrestore(&level->lock,flags); - return -EBUSY; - } - - /* add new interrupt at end of irq queue */ - pp = p; - while (*pp) - pp = &(*pp)->next; - - *pp = new; - - level->usage++; - level->flags = new->flags; - - /* turn the interrupts on */ - if (level->usage == 1) - __clr_MASK(level - frv_irq_levels); - - if (p == pp && group->control) - group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 1); - - spin_unlock_irqrestore(&level->lock, flags); - register_irq_proc(irq); - return 0; -} - -static struct proc_dir_entry * root_irq_dir; -static struct proc_dir_entry * irq_dir [NR_IRQS]; - -#define HEX_DIGITS 8 - -static unsigned int parse_hex_value (const char __user *buffer, - unsigned long count, unsigned long *ret) -{ - unsigned char hexnum [HEX_DIGITS]; - unsigned long value; - int i; - - if (!count) - return -EINVAL; - if (count > HEX_DIGITS) - count = HEX_DIGITS; - if (copy_from_user(hexnum, buffer, count)) - return -EFAULT; - - /* - * Parse the first 8 characters as a hex string, any non-hex char - * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same. - */ - value = 0; - - for (i = 0; i < count; i++) { - unsigned int c = hexnum[i]; - - switch (c) { - case '0' ... '9': c -= '0'; break; - case 'a' ... 'f': c -= 'a'-10; break; - case 'A' ... 'F': c -= 'A'-10; break; - default: - goto out; - } - value = (value << 4) | c; - } -out: - *ret = value; - return 0; -} - - -static int prof_cpu_mask_read_proc (char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - unsigned long *mask = (unsigned long *) data; - if (count < HEX_DIGITS+1) - return -EINVAL; - return sprintf (page, "%08lx\n", *mask); -} - -static int prof_cpu_mask_write_proc (struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - unsigned long *mask = (unsigned long *) data, full_count = count, err; - unsigned long new_value; - - show_state(); - err = parse_hex_value(buffer, count, &new_value); - if (err) - return err; - - *mask = new_value; - return full_count; -} - -#define MAX_NAMELEN 10 - -static void register_irq_proc (unsigned int irq) -{ - char name [MAX_NAMELEN]; - - if (!root_irq_dir || irq_dir[irq]) - return; - - memset(name, 0, MAX_NAMELEN); - sprintf(name, "%d", irq); - - /* create /proc/irq/1234 */ - irq_dir[irq] = proc_mkdir(name, root_irq_dir); -} - -unsigned long prof_cpu_mask = -1; - -void init_irq_proc (void) +void __init init_IRQ(void) { - struct proc_dir_entry *entry; - int i; + int level; - /* create /proc/irq */ - root_irq_dir = proc_mkdir("irq", NULL); + for (level = 1; level <= 14; level++) + set_irq_chip_and_handler(level, &frv_cpu_pic, + handle_level_irq); - /* create /proc/irq/prof_cpu_mask */ - entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir); - if (!entry) - return; + set_irq_handler(IRQ_CPU_TIMER0, handle_edge_irq); - entry->nlink = 1; - entry->data = (void *)&prof_cpu_mask; - entry->read_proc = prof_cpu_mask_read_proc; - entry->write_proc = prof_cpu_mask_write_proc; - - /* - * Create entries for all existing IRQs. + /* set the trigger levels for internal interrupt sources + * - timers all falling-edge + * - ERR0 is rising-edge + * - all others are high-level */ - for (i = 0; i < NR_IRQS; i++) - register_irq_proc(i); -} + __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 */ + __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 */ + + /* route internal interrupts */ + set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL, + IRQ_DMA0_LEVEL); + set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL); + set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL, + IRQ_UART1_LEVEL, IRQ_UART0_LEVEL); + set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL, + IRQ_DMA4_LEVEL); + + /* route external interrupts */ + set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL, + IRQ_XIRQ4_LEVEL); + set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL, + IRQ_XIRQ0_LEVEL); + +#if defined(CONFIG_MB93091_VDK) + __set_TM1(0x55550000); /* XIRQ7-0 all active low */ +#elif defined(CONFIG_MB93093_PDK) + __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */ +#else +#error dont know external IRQ trigger levels for this setup +#endif -/*****************************************************************************/ -/* - * initialise the interrupt system - */ -void __init init_IRQ(void) -{ - route_cpu_irqs(); fpga_init(); #ifdef CONFIG_FUJITSU_MB93493 - route_mb93493_irqs(); + mb93493_init(); #endif -} /* end init_IRQ() */ +} diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index af08ccd4ed6..d96a57e5f03 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -43,7 +43,6 @@ #include <asm/mb-regs.h> #include <asm/mb93493-regs.h> #include <asm/gdb-stub.h> -#include <asm/irq-routing.h> #include <asm/io.h> #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 68a77fe3bb4..3d0284bccb9 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -26,7 +26,6 @@ #include <asm/timer-regs.h> #include <asm/mb-regs.h> #include <asm/mb86943a.h> -#include <asm/irq-routing.h> #include <linux/timex.h> diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c index 2278c80bd88..ba587523c01 100644 --- a/arch/frv/mb93090-mb00/pci-irq.c +++ b/arch/frv/mb93090-mb00/pci-irq.c @@ -15,7 +15,6 @@ #include <asm/io.h> #include <asm/smp.h> -#include <asm/irq-routing.h> #include "pci-frv.h" diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index b5b4286f9dd..3f3a0ed3539 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -98,7 +98,7 @@ void show_mem(void) */ void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; /* allocate some pages for kernel housekeeping tasks */ empty_bad_page_table = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index d3d40bdc2d6..e4f4199f97a 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -138,7 +138,7 @@ void paging_init(void) #endif { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index b2751eadbc5..3fd2f256f2b 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -166,7 +166,6 @@ config X86_VISWS config X86_GENERICARCH bool "Generic architecture (Summit, bigsmp, ES7000, default)" - depends on SMP help This option compiles in the Summit, bigsmp, ES7000, default subarchitectures. It is intended for a generic binary kernel. @@ -263,7 +262,7 @@ source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" - depends on !SMP && !(X86_VISWS || X86_VOYAGER) + depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH) help A local APIC (Advanced Programmable Interrupt Controller) is an integrated interrupt controller in the CPU. If you have a single-CPU @@ -288,12 +287,12 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC bool - depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) + depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH default y config X86_IO_APIC bool - depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) + depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH default y config X86_VISWS_APIC @@ -402,6 +401,7 @@ config X86_REBOOTFIXUPS config MICROCODE tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support" + select FW_LOADER ---help--- If you say Y here and also to "/dev file system support" in the 'File systems' section, you will be able to update the microcode on @@ -417,6 +417,11 @@ config MICROCODE To compile this driver as a module, choose M here: the module will be called microcode. +config MICROCODE_OLD_INTERFACE + bool + depends on MICROCODE + default y + config X86_MSR tristate "/dev/cpu/*/msr - Model-specific register support" help @@ -494,7 +499,7 @@ config HIGHMEM64G endchoice choice - depends on EXPERIMENTAL && !X86_PAE + depends on EXPERIMENTAL prompt "Memory split" if EMBEDDED default VMSPLIT_3G help @@ -516,6 +521,7 @@ choice config VMSPLIT_3G bool "3G/1G user/kernel split" config VMSPLIT_3G_OPT + depends on !HIGHMEM bool "3G/1G user/kernel split (for full 1G low memory)" config VMSPLIT_2G bool "2G/2G user/kernel split" @@ -598,12 +604,10 @@ config ARCH_SELECT_MEMORY_MODEL def_bool y depends on ARCH_SPARSEMEM_ENABLE -source "mm/Kconfig" +config ARCH_POPULATES_NODE_MAP + def_bool y -config HAVE_ARCH_EARLY_PFN_TO_NID - bool - default y - depends on NUMA +source "mm/Kconfig" config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" @@ -740,8 +744,7 @@ config SECCOMP source kernel/Kconfig.hz config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "kexec system call" help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -762,6 +765,13 @@ config CRASH_DUMP depends on HIGHMEM help Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or BIOS using + PHYSICAL_START. + For more details see Documentation/kdump/kdump.txt config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) @@ -794,6 +804,7 @@ config HOTPLUG_CPU config COMPAT_VDSO bool "Compat VDSO support" default y + depends on !PARAVIRT help Map the VDSO to the predictable old-style address too. ---help--- diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 3e4adb1e224..7cc0b189b82 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -46,6 +46,14 @@ cflags-y += -ffreestanding # a lot more stack due to the lack of sharing of stacklots: CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) +# do binutils support CFI? +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) + +# is .cfi_signal_frame supported too? +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) + CFLAGS += $(cflags-y) # Default subarch .c files diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S index 4b84ea216f2..34321368011 100644 --- a/arch/i386/boot/edd.S +++ b/arch/i386/boot/edd.S @@ -15,42 +15,95 @@ #include <asm/setup.h> #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) + +# It is assumed that %ds == INITSEG here + movb $0, (EDD_MBR_SIG_NR_BUF) movb $0, (EDDNR) -# Check the command line for two options: +# Check the command line for options: # edd=of disables EDD completely (edd=off) # edd=sk skips the MBR test (edd=skipmbr) +# edd=on re-enables EDD (edd=on) + pushl %esi - cmpl $0, %cs:cmd_line_ptr - jz done_cl + movw $edd_mbr_sig_start, %di # Default to edd=on + movl %cs:(cmd_line_ptr), %esi -# ds:esi has the pointer to the command line now - movl $(COMMAND_LINE_SIZE-7), %ecx -# loop through kernel command line one byte at a time -cl_loop: - cmpl $EDD_CL_EQUALS, (%si) + andl %esi, %esi + jz old_cl # Old boot protocol? + +# Convert to a real-mode pointer in fs:si + movl %esi, %eax + shrl $4, %eax + movw %ax, %fs + andw $0xf, %si + jmp have_cl_pointer + +# Old-style boot protocol? +old_cl: + push %ds # aka INITSEG + pop %fs + + cmpw $0xa33f, (0x20) + jne done_cl # No command line at all? + movw (0x22), %si # Pointer relative to INITSEG + +# fs:si has the pointer to the command line now +have_cl_pointer: + +# Loop through kernel command line one byte at a time. Just in +# case the loader is buggy and failed to null-terminate the command line +# terminate if we get close enough to the end of the segment that we +# cannot fit "edd=XX"... +cl_atspace: + cmpw $-5, %si # Watch for segment wraparound + jae done_cl + movl %fs:(%si), %eax + andb %al, %al # End of line? + jz done_cl + cmpl $EDD_CL_EQUALS, %eax jz found_edd_equals - incl %esi - loop cl_loop - jmp done_cl + cmpb $0x20, %al # <= space consider whitespace + ja cl_skipword + incw %si + jmp cl_atspace + +cl_skipword: + cmpw $-5, %si # Watch for segment wraparound + jae done_cl + movb %fs:(%si), %al # End of string? + andb %al, %al + jz done_cl + cmpb $0x20, %al + jbe cl_atspace + incw %si + jmp cl_skipword + found_edd_equals: # only looking at first two characters after equals - addl $4, %esi - cmpw $EDD_CL_OFF, (%si) # edd=of - jz do_edd_off - cmpw $EDD_CL_SKIP, (%si) # edd=sk - jz do_edd_skipmbr - jmp done_cl +# late overrides early on the command line, so keep going after finding something + movw %fs:4(%si), %ax + cmpw $EDD_CL_OFF, %ax # edd=of + je do_edd_off + cmpw $EDD_CL_SKIP, %ax # edd=sk + je do_edd_skipmbr + cmpw $EDD_CL_ON, %ax # edd=on + je do_edd_on + jmp cl_skipword do_edd_skipmbr: - popl %esi - jmp edd_start + movw $edd_start, %di + jmp cl_skipword do_edd_off: - popl %esi - jmp edd_done + movw $edd_done, %di + jmp cl_skipword +do_edd_on: + movw $edd_mbr_sig_start, %di + jmp cl_skipword + done_cl: popl %esi - + jmpw *%di # Read the first sector of each BIOS disk device and store the 4-byte signature edd_mbr_sig_start: diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S index d2b684cd620..3aec4538a11 100644 --- a/arch/i386/boot/setup.S +++ b/arch/i386/boot/setup.S @@ -494,12 +494,12 @@ no_voyager: movw %cs, %ax # aka SETUPSEG subw $DELTA_INITSEG, %ax # aka INITSEG movw %ax, %ds - movw $0, (0x1ff) # default is no pointing device + movb $0, (0x1ff) # default is no pointing device int $0x11 # int 0x11: equipment list testb $0x04, %al # check if mouse installed jz no_psmouse - movw $0xAA, (0x1ff) # device present + movb $0xAA, (0x1ff) # device present no_psmouse: #if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 89ebb7a316a..1a29bfa26d0 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,41 +1,51 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.18-git5 +# Tue Sep 26 09:30:47 2006 # CONFIG_X86_32=y +CONFIG_GENERIC_TIME=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y -CONFIG_VM86=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL=y CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -45,11 +55,9 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -60,41 +68,45 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y # # Block layer # -# CONFIG_LBD is not set +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # -CONFIG_X86_PC=y +CONFIG_SMP=y +# CONFIG_X86_PC is not set # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set -# CONFIG_X86_GENERICARCH is not set +CONFIG_X86_GENERICARCH=y # CONFIG_X86_ES7000 is not set +CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -102,11 +114,11 @@ CONFIG_X86_PC=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set +CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set -CONFIG_MK7=y +# CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set @@ -117,10 +129,10 @@ CONFIG_MK7=y # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set -# CONFIG_X86_GENERIC is not set +CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y -CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y @@ -131,26 +143,28 @@ CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_USE_3DNOW=y CONFIG_X86_TSC=y -# CONFIG_HPET_TIMER is not set -# CONFIG_SMP is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_NR_CPUS=32 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_X86_UP_APIC=y -CONFIG_X86_UP_IOAPIC=y +CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y -# CONFIG_X86_MCE_P4THERMAL is not set +CONFIG_X86_MCE_P4THERMAL=y +CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set +CONFIG_MICROCODE=y +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y # # Firmware Drivers @@ -158,68 +172,67 @@ CONFIG_X86_MCE_NONFATAL=y # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set +# CONFIG_NOHIGHMEM is not set +CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +# CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set +# CONFIG_IRQBALANCE is not set CONFIG_REGPARM=y -# CONFIG_SECCOMP is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ=250 # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 -CONFIG_DOUBLEFAULT=y +# CONFIG_HOTPLUG_CPU is not set +CONFIG_COMPAT_VDSO=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options (ACPI, APM) # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -CONFIG_SOFTWARE_SUSPEND=y -CONFIG_PM_STD_PARTITION="" # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -# CONFIG_ACPI_SLEEP is not set -# CONFIG_ACPI_AC is not set -# CONFIG_ACPI_BATTERY is not set -# CONFIG_ACPI_BUTTON is not set +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set -# CONFIG_ACPI_FAN is not set -# CONFIG_ACPI_PROCESSOR is not set +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_BLACKLIST_YEAR=2001 +CONFIG_ACPI_DEBUG=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y -# CONFIG_X86_PM_TIMER is not set +CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # @@ -230,7 +243,41 @@ CONFIG_ACPI_SYSTEM=y # # CPU Frequency scaling # -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPUFreq processor drivers +# +CONFIG_X86_ACPI_CPUFREQ=y +# CONFIG_X86_POWERNOW_K6 is not set +# CONFIG_X86_POWERNOW_K7 is not set +CONFIG_X86_POWERNOW_K8=y +CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_GX_SUSPMOD is not set +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_SPEEDSTEP_ICH is not set +# CONFIG_X86_SPEEDSTEP_SMI is not set +# CONFIG_X86_P4_CLOCKMOD is not set +# CONFIG_X86_CPUFREQ_NFORCE2 is not set +# CONFIG_X86_LONGRUN is not set +# CONFIG_X86_LONGHAUL is not set + +# +# shared options +# +CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -244,12 +291,13 @@ CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_PCI_MSI=y +# CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +CONFIG_K8_NB=y # # PCCARD (PCMCIA/CardBus) support @@ -278,93 +326,54 @@ CONFIG_NET=y # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y +# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_INET_DIAG is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NETFILTER_XTABLES=y -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -CONFIG_NETFILTER_XT_MATCH_LIMIT=y -CONFIG_NETFILTER_XT_MATCH_MAC=y -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -CONFIG_NETFILTER_XT_MATCH_STATE=y -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=y -# CONFIG_IP_NF_IRC is not set -# CONFIG_IP_NF_NETBIOS_NS is not set -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_PPTP is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=y -# CONFIG_IP_NF_MATCH_IPRANGE is not set -# CONFIG_IP_NF_MATCH_MULTIPORT is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -# CONFIG_IP_NF_MATCH_AH_ESP is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=y -# CONFIG_IP_NF_TARGET_REJECT is not set -CONFIG_IP_NF_TARGET_LOG=y -# CONFIG_IP_NF_TARGET_ULOG is not set -# CONFIG_IP_NF_TARGET_TCPMSS is not set -# CONFIG_IP_NF_NAT is not set -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_SUBTREES is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) @@ -389,7 +398,6 @@ CONFIG_IP_NF_TARGET_LOG=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -402,6 +410,7 @@ CONFIG_IP_NF_TARGET_LOG=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -416,7 +425,9 @@ CONFIG_IP_NF_TARGET_LOG=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -431,13 +442,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Parallel port support # -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_1284=y +# CONFIG_PARPORT is not set # # Plug and Play support @@ -447,8 +452,7 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set +CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -459,8 +463,11 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -476,7 +483,7 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -486,10 +493,10 @@ CONFIG_BLK_DEV_IDECD=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set +CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set @@ -500,7 +507,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set @@ -511,7 +518,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -521,7 +528,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -533,6 +540,7 @@ CONFIG_IDEDMA_AUTO=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y # CONFIG_SCSI_PROC_FS is not set # @@ -541,8 +549,9 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # @@ -553,29 +562,44 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_BLK_DEV_3W_XXXX_RAID=y # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set +CONFIG_SCSI_AIC7XXX=y +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=5000 +CONFIG_AIC7XXX_DEBUG_ENABLE=y +CONFIG_AIC7XXX_DEBUG_MASK=0 +CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC79XX=y +CONFIG_AIC79XX_CMDS_PER_DEVICE=32 +CONFIG_AIC79XX_RESET_DELAY_MS=4000 +# CONFIG_AIC79XX_ENABLE_RD_STRM is not set +# CONFIG_AIC79XX_DEBUG_ENABLE is not set +CONFIG_AIC79XX_DEBUG_MASK=0 +# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -584,11 +608,9 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -598,22 +620,114 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SVW=y +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +CONFIG_SATA_NV=y +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +CONFIG_SATA_VIA=y +# CONFIG_SATA_VITESSE is not set +CONFIG_SATA_INTEL_COMBINED=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# # Multi-device support (RAID and LVM) # -# CONFIG_MD is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# + +# +# Texas Instruments PCILynx requires I2C +# +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +# CONFIG_IEEE1394_VIDEO1394 is not set +# CONFIG_IEEE1394_SBP2 is not set +# CONFIG_IEEE1394_ETH1394 is not set +# CONFIG_IEEE1394_DV1394 is not set +CONFIG_IEEE1394_RAWIO=y # # I2O device support @@ -652,46 +766,63 @@ CONFIG_MII=y # # Tulip family network device support # -# CONFIG_NET_TULIP is not set +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set +CONFIG_B44=y +CONFIG_FORCEDETH=y +# CONFIG_FORCEDETH_NAPI is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set +CONFIG_8139CP=y +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set -# CONFIG_E1000 is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SKY2 is not set +CONFIG_SKY2=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set +CONFIG_TIGON3=y +CONFIG_BNX2=y +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -699,6 +830,7 @@ CONFIG_E100=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -716,14 +848,15 @@ CONFIG_E100=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -745,8 +878,8 @@ CONFIG_INPUT=y # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y @@ -776,7 +909,6 @@ CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -788,14 +920,15 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -# CONFIG_SERIAL_8250_ACPI is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -804,14 +937,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # Non-8250 serial port support # CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=y -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set # # IPMI @@ -822,8 +952,12 @@ CONFIG_PRINTER=y # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -CONFIG_NVRAM=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_INTEL=y +CONFIG_HW_RANDOM_AMD=y +CONFIG_HW_RANDOM_GEODE=y +CONFIG_HW_RANDOM_VIA=y +# CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -833,31 +967,28 @@ CONFIG_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set -# CONFIG_AGP_AMD64 is not set -# CONFIG_AGP_INTEL is not set +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set -CONFIG_AGP_VIA=y +# CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set -CONFIG_DRM=y -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -CONFIG_DRM_RADEON=y -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM is not set # CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -# CONFIG_HANGCHECK_TIMER is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +CONFIG_HPET=y +# CONFIG_HPET_RTC_IRQ is not set +CONFIG_HPET_MMAP=y +CONFIG_HANGCHECK_TIMER=y # # TPM devices @@ -868,59 +999,7 @@ CONFIG_DRM_RADEON=y # # I2C support # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_ISA=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -CONFIG_I2C_VIAPRO=y -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C is not set # # SPI support @@ -931,51 +1010,12 @@ CONFIG_I2C_VIAPRO=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # -CONFIG_HWMON=y -CONFIG_HWMON_VID=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_IT87=y -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_SENSORS_HDAPS is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices @@ -983,117 +1023,31 @@ CONFIG_SENSORS_IT87=y # CONFIG_IBM_ASM is not set # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # -CONFIG_VIDEO_DEV=y - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_BWQCAM is not set -# CONFIG_VIDEO_CQCAM is not set -# CONFIG_VIDEO_W9966 is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_ZORAN is not set -CONFIG_VIDEO_SAA7134=y -# CONFIG_VIDEO_SAA7134_ALSA is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_DPC is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_VIDEO_AUDIO_DECODER is not set -# CONFIG_VIDEO_DECODER is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set -CONFIG_VIDEO_TUNER=y -CONFIG_VIDEO_BUF=y -CONFIG_VIDEO_IR=y +# CONFIG_USB_DABUSB is not set # # Graphics support # -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_VESA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_HGA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_VIRTUAL is not set +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 +CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1104,97 +1058,30 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_RAWMIDI=y -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQ_DUMMY is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_RTCTIMER=y -CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_MPU401_UART=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -CONFIG_SND_VIA82XX=y -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND is not set # # Open Sound System # -# CONFIG_SOUND_PRIME is not set +CONFIG_SOUND_PRIME=y +CONFIG_OSS_OBSOLETE_DRIVER=y +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_ES1371 is not set +CONFIG_SOUND_ICH=y +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_SOUND_OSS is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1213,17 +1100,19 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1248,21 +1137,17 @@ CONFIG_USB_STORAGE=y # # USB Input Devices # -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1277,21 +1162,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_PWC is not set - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1299,12 +1169,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +CONFIG_USB_MON=y # # USB port drivers # -# CONFIG_USB_USS720 is not set # # USB Serial Converter support @@ -1321,10 +1190,12 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1344,56 +1215,96 @@ CONFIG_USB_STORAGE=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# +# CONFIG_EDAC is not set + +# +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # -# EDAC - error detection and reporting (RAS) +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices # -# CONFIG_EDAC is not set # # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +# CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set +CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set @@ -1404,10 +1315,9 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1430,13 +1340,26 @@ CONFIG_RAMFS=y # # Network File Systems # -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -CONFIG_CIFS=y -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1445,33 +1368,18 @@ CONFIG_CIFS=y # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-15" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -1491,7 +1399,7 @@ CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -1510,20 +1418,50 @@ CONFIG_NLS_UTF8=y # # Instrumentation Support # -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_UNWIND_INFO=y +CONFIG_STACK_UNWIND=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_RODATA is not set +# CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y +CONFIG_DOUBLEFAULT=y # # Security options @@ -1537,10 +1475,6 @@ CONFIG_X86_MPPARSE=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set @@ -1548,7 +1482,12 @@ CONFIG_X86_MPPARSE=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 5427a842e84..1a884b6e6e5 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ +obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o bootflag.o \ quirks.o i8237.o topology.o alternative.o i8253.o tsc.o @@ -81,4 +81,5 @@ $(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \ $(call if_changed,syscall) k8-y += ../../x86_64/kernel/k8.o +stacktrace-y += ../../x86_64/kernel/stacktrace.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index 7e9ac99354f..7f7be01f44e 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_ACPI) += boot.o +ifneq ($(CONFIG_PCI),) obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o +endif obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o ifneq ($(CONFIG_ACPI_PROCESSOR),) diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index ee003bc0e8b..1aaea6ab8c4 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -26,9 +26,12 @@ #include <linux/init.h> #include <linux/acpi.h> #include <linux/efi.h> +#include <linux/cpumask.h> #include <linux/module.h> #include <linux/dmi.h> #include <linux/irq.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> #include <asm/pgtable.h> #include <asm/io_apic.h> @@ -36,11 +39,17 @@ #include <asm/io.h> #include <asm/mpspec.h> -#ifdef CONFIG_X86_64 +static int __initdata acpi_force = 0; -extern void __init clustered_apic_check(void); +#ifdef CONFIG_ACPI +int acpi_disabled = 0; +#else +int acpi_disabled = 1; +#endif +EXPORT_SYMBOL(acpi_disabled); + +#ifdef CONFIG_X86_64 -extern int gsi_irq_sharing(int gsi); #include <asm/proto.h> static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } @@ -506,16 +515,76 @@ EXPORT_SYMBOL(acpi_register_gsi); #ifdef CONFIG_ACPI_HOTPLUG_CPU int acpi_map_lsapic(acpi_handle handle, int *pcpu) { - /* TBD */ - return -EINVAL; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + struct acpi_table_lapic *lapic; + cpumask_t tmp_map, new_map; + u8 physid; + int cpu; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) + return -EINVAL; + + if (!buffer.length || !buffer.pointer) + return -EINVAL; + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_BUFFER || + obj->buffer.length < sizeof(*lapic)) { + kfree(buffer.pointer); + return -EINVAL; + } + + lapic = (struct acpi_table_lapic *)obj->buffer.pointer; + + if ((lapic->header.type != ACPI_MADT_LAPIC) || + (!lapic->flags.enabled)) { + kfree(buffer.pointer); + return -EINVAL; + } + + physid = lapic->id; + + kfree(buffer.pointer); + buffer.length = ACPI_ALLOCATE_BUFFER; + buffer.pointer = NULL; + + tmp_map = cpu_present_map; + mp_register_lapic(physid, lapic->flags.enabled); + + /* + * If mp_register_lapic successfully generates a new logical cpu + * number, then the following will get us exactly what was mapped + */ + cpus_andnot(new_map, cpu_present_map, tmp_map); + if (cpus_empty(new_map)) { + printk ("Unable to map lapic to logical cpu number\n"); + return -EINVAL; + } + + cpu = first_cpu(new_map); + + *pcpu = cpu; + return 0; } EXPORT_SYMBOL(acpi_map_lsapic); int acpi_unmap_lsapic(int cpu) { - /* TBD */ - return -EINVAL; + int i; + + for_each_possible_cpu(i) { + if (x86_acpiid_to_apicid[i] == x86_cpu_to_apicid[cpu]) { + x86_acpiid_to_apicid[i] = -1; + break; + } + } + x86_cpu_to_apicid[cpu] = -1; + cpu_clear(cpu, cpu_present_map); + num_processors--; + + return (0); } EXPORT_SYMBOL(acpi_unmap_lsapic); @@ -579,6 +648,8 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) { struct acpi_table_hpet *hpet_tbl; + struct resource *hpet_res; + resource_size_t res_start; if (!phys || !size) return -EINVAL; @@ -594,12 +665,26 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) "memory.\n"); return -1; } + +#define HPET_RESOURCE_NAME_SIZE 9 + hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE); + if (hpet_res) { + memset(hpet_res, 0, sizeof(*hpet_res)); + hpet_res->name = (void *)&hpet_res[1]; + hpet_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, + "HPET %u", hpet_tbl->number); + hpet_res->end = (1 * 1024) - 1; + } + #ifdef CONFIG_X86_64 vxtime.hpet_address = hpet_tbl->addr.addrl | ((long)hpet_tbl->addr.addrh << 32); printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", hpet_tbl->id, vxtime.hpet_address); + + res_start = vxtime.hpet_address; #else /* X86 */ { extern unsigned long hpet_address; @@ -607,9 +692,17 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) hpet_address = hpet_tbl->addr.addrl; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", hpet_tbl->id, hpet_address); + + res_start = hpet_address; } #endif /* X86 */ + if (hpet_res) { + hpet_res->start = res_start; + hpet_res->end += res_start; + insert_resource(&iomem_resource, hpet_res); + } + return 0; } #else @@ -860,8 +953,6 @@ static void __init acpi_process_madt(void) return; } -extern int acpi_force; - #ifdef __i386__ static int __init disable_acpi_irq(struct dmi_system_id *d) @@ -1163,3 +1254,75 @@ int __init acpi_boot_init(void) return 0; } + +static int __init parse_acpi(char *arg) +{ + if (!arg) + return -EINVAL; + + /* "acpi=off" disables both ACPI table parsing and interpreter */ + if (strcmp(arg, "off") == 0) { + disable_acpi(); + } + /* acpi=force to over-ride black-list */ + else if (strcmp(arg, "force") == 0) { + acpi_force = 1; + acpi_ht = 1; + acpi_disabled = 0; + } + /* acpi=strict disables out-of-spec workarounds */ + else if (strcmp(arg, "strict") == 0) { + acpi_strict = 1; + } + /* Limit ACPI just to boot-time to enable HT */ + else if (strcmp(arg, "ht") == 0) { + if (!acpi_force) + disable_acpi(); + acpi_ht = 1; + } + /* "acpi=noirq" disables ACPI interrupt routing */ + else if (strcmp(arg, "noirq") == 0) { + acpi_noirq_set(); + } else { + /* Core will printk when we return error. */ + return -EINVAL; + } + return 0; +} +early_param("acpi", parse_acpi); + +/* FIXME: Using pci= for an ACPI parameter is a travesty. */ +static int __init parse_pci(char *arg) +{ + if (arg && strcmp(arg, "noacpi") == 0) + acpi_disable_pci(); + return 0; +} +early_param("pci", parse_pci); + +#ifdef CONFIG_X86_IO_APIC +static int __init parse_acpi_skip_timer_override(char *arg) +{ + acpi_skip_timer_override = 1; + return 0; +} +early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override); +#endif /* CONFIG_X86_IO_APIC */ + +static int __init setup_acpi_sci(char *s) +{ + if (!s) + return -EINVAL; + if (!strcmp(s, "edge")) + acpi_sci_flags.trigger = 1; + else if (!strcmp(s, "level")) + acpi_sci_flags.trigger = 3; + else if (!strcmp(s, "high")) + acpi_sci_flags.polarity = 1; + else if (!strcmp(s, "low")) + acpi_sci_flags.polarity = 3; + else + return -EINVAL; + return 0; +} +early_param("acpi_sci", setup_acpi_sci); diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 1649a175a20..fe799b11ac0 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -48,7 +48,11 @@ void __init check_acpi_pci(void) int num, slot, func; /* Assume the machine supports type 1. If not it will - always read ffffffff and should not have any side effect. */ + always read ffffffff and should not have any side effect. + Actually a few buggy systems can machine check. Allow the user + to disable it by command line option at least -AK */ + if (!early_pci_allowed()) + return; /* Poor man's PCI discovery */ for (num = 0; num < 32; num++) { diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 8c844d07862..90faae5c5d3 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -52,7 +52,18 @@ static cpumask_t timer_bcast_ipi; /* * Knob to control our willingness to enable the local APIC. */ -int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ +static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ + +static inline void lapic_disable(void) +{ + enable_local_apic = -1; + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); +} + +static inline void lapic_enable(void) +{ + enable_local_apic = 1; +} /* * Debug level @@ -586,8 +597,7 @@ void __devinit setup_local_APIC(void) printk("No ESR for 82489DX.\n"); } - if (nmi_watchdog == NMI_LOCAL_APIC) - setup_apic_nmi_watchdog(); + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } @@ -1373,3 +1383,18 @@ int __init APIC_init_uniprocessor (void) return 0; } + +static int __init parse_lapic(char *arg) +{ + lapic_enable(); + return 0; +} +early_param("lapic", parse_lapic); + +static int __init parse_nolapic(char *arg) +{ + lapic_disable(); + return 0; +} +early_param("nolapic", parse_nolapic); + diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 8591f2fa920..ff9ce4b5eaa 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -1154,9 +1154,11 @@ out: static void set_time(void) { + struct timespec ts; if (got_clock_diff) { /* Must know time zone in order to set clock */ - xtime.tv_sec = get_cmos_time() + clock_cmos_diff; - xtime.tv_nsec = 0; + ts.tv_sec = get_cmos_time() + clock_cmos_diff; + ts.tv_nsec = 0; + do_settimeofday(&ts); } } @@ -1232,13 +1234,8 @@ static int suspend(int vetoable) restore_processor_state(); local_irq_disable(); - write_seqlock(&xtime_lock); - spin_lock(&i8253_lock); - reinit_timer(); set_time(); - - spin_unlock(&i8253_lock); - write_sequnlock(&xtime_lock); + reinit_timer(); if (err == APM_NO_ERROR) err = APM_SUCCESS; @@ -1365,9 +1362,7 @@ static void check_events(void) ignore_bounce = 1; if ((event != APM_NORMAL_RESUME) || (ignore_normal_resume == 0)) { - write_seqlock_irq(&xtime_lock); set_time(); - write_sequnlock_irq(&xtime_lock); device_resume(); pm_send_all(PM_RESUME, (void *)0); queue_event(event, NULL); @@ -1383,9 +1378,7 @@ static void check_events(void) break; case APM_UPDATE_TIME: - write_seqlock_irq(&xtime_lock); set_time(); - write_sequnlock_irq(&xtime_lock); break; case APM_CRITICAL_SUSPEND: @@ -2339,6 +2332,7 @@ static int __init apm_init(void) ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD); if (ret < 0) { printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n"); + remove_proc_entry("apm", NULL); return -ENOMEM; } @@ -2348,7 +2342,13 @@ static int __init apm_init(void) return 0; } - misc_register(&apm_device); + /* + * Note we don't actually care if the misc_device cannot be registered. + * this driver can do its job without it, even if userspace can't + * control it. just log the error + */ + if (misc_register(&apm_device)) + printk(KERN_WARNING "apm: Could not register misc device.\n"); if (HZ != 100) idle_period = (idle_period * HZ) / 100; diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index e6a2d6b80cd..e4758095d87 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -22,7 +22,7 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -static void __init init_amd(struct cpuinfo_x86 *c) +static void __cpuinit init_amd(struct cpuinfo_x86 *c) { u32 l, h; int mbytes = num_physpages >> (20-PAGE_SHIFT); @@ -246,7 +246,7 @@ static void __init init_amd(struct cpuinfo_x86 *c) num_cache_leaves = 3; } -static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) +static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) { /* AMD errata T13 (order #21922) */ if ((c->x86 == 6)) { @@ -259,7 +259,7 @@ static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) return size; } -static struct cpu_dev amd_cpu_dev __initdata = { +static struct cpu_dev amd_cpu_dev __cpuinitdata = { .c_vendor = "AMD", .c_ident = { "AuthenticAMD" }, .c_models = { @@ -275,7 +275,6 @@ static struct cpu_dev amd_cpu_dev __initdata = { }, }, .c_init = init_amd, - .c_identify = generic_identify, .c_size_cache = amd_size_cache, }; diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c index bd75629dd26..8c25047975c 100644 --- a/arch/i386/kernel/cpu/centaur.c +++ b/arch/i386/kernel/cpu/centaur.c @@ -9,7 +9,7 @@ #ifdef CONFIG_X86_OOSTORE -static u32 __init power2(u32 x) +static u32 __cpuinit power2(u32 x) { u32 s=1; while(s<=x) @@ -22,7 +22,7 @@ static u32 __init power2(u32 x) * Set up an actual MCR */ -static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key) +static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key) { u32 lo, hi; @@ -40,7 +40,7 @@ static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key) * Shortcut: We know you can't put 4Gig of RAM on a winchip */ -static u32 __init ramtop(void) /* 16388 */ +static u32 __cpuinit ramtop(void) /* 16388 */ { int i; u32 top = 0; @@ -91,7 +91,7 @@ static u32 __init ramtop(void) /* 16388 */ * Compute a set of MCR's to give maximum coverage */ -static int __init centaur_mcr_compute(int nr, int key) +static int __cpuinit centaur_mcr_compute(int nr, int key) { u32 mem = ramtop(); u32 root = power2(mem); @@ -166,7 +166,7 @@ static int __init centaur_mcr_compute(int nr, int key) return ct; } -static void __init centaur_create_optimal_mcr(void) +static void __cpuinit centaur_create_optimal_mcr(void) { int i; /* @@ -189,7 +189,7 @@ static void __init centaur_create_optimal_mcr(void) wrmsr(MSR_IDT_MCR0+i, 0, 0); } -static void __init winchip2_create_optimal_mcr(void) +static void __cpuinit winchip2_create_optimal_mcr(void) { u32 lo, hi; int i; @@ -227,7 +227,7 @@ static void __init winchip2_create_optimal_mcr(void) * Handle the MCR key on the Winchip 2. */ -static void __init winchip2_unprotect_mcr(void) +static void __cpuinit winchip2_unprotect_mcr(void) { u32 lo, hi; u32 key; @@ -239,7 +239,7 @@ static void __init winchip2_unprotect_mcr(void) wrmsr(MSR_IDT_MCR_CTRL, lo, hi); } -static void __init winchip2_protect_mcr(void) +static void __cpuinit winchip2_protect_mcr(void) { u32 lo, hi; @@ -257,7 +257,7 @@ static void __init winchip2_protect_mcr(void) #define RNG_ENABLED (1 << 3) #define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */ -static void __init init_c3(struct cpuinfo_x86 *c) +static void __cpuinit init_c3(struct cpuinfo_x86 *c) { u32 lo, hi; @@ -303,7 +303,7 @@ static void __init init_c3(struct cpuinfo_x86 *c) display_cacheinfo(c); } -static void __init init_centaur(struct cpuinfo_x86 *c) +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { enum { ECX8=1<<1, @@ -442,7 +442,7 @@ static void __init init_centaur(struct cpuinfo_x86 *c) } } -static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size) +static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size) { /* VIA C3 CPUs (670-68F) need further shifting. */ if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8))) @@ -457,7 +457,7 @@ static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size return size; } -static struct cpu_dev centaur_cpu_dev __initdata = { +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, .c_init = init_centaur, diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 70c87de582c..2799baaadf4 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -36,7 +36,7 @@ struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; extern int disable_pse; -static void default_init(struct cpuinfo_x86 * c) +static void __cpuinit default_init(struct cpuinfo_x86 * c) { /* Not much we can do here... */ /* Check if at least it has cpuid */ @@ -49,7 +49,7 @@ static void default_init(struct cpuinfo_x86 * c) } } -static struct cpu_dev default_cpu = { +static struct cpu_dev __cpuinitdata default_cpu = { .c_init = default_init, .c_vendor = "Unknown", }; @@ -265,7 +265,7 @@ static void __init early_cpu_detect(void) } } -void __cpuinit generic_identify(struct cpuinfo_x86 * c) +static void __cpuinit generic_identify(struct cpuinfo_x86 * c) { u32 tfms, xlvl; int ebx; @@ -675,7 +675,7 @@ old_gdt: #endif /* Clear %fs and %gs. */ - asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs"); + asm volatile ("movl %0, %%fs; movl %0, %%gs" : : "r" (0)); /* Clear all 6 debug registers: */ set_debugreg(0, 0); diff --git a/arch/i386/kernel/cpu/cpu.h b/arch/i386/kernel/cpu/cpu.h index 5a1d4f163e8..2f6432cef6f 100644 --- a/arch/i386/kernel/cpu/cpu.h +++ b/arch/i386/kernel/cpu/cpu.h @@ -24,7 +24,5 @@ extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM]; extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); -extern void generic_identify(struct cpuinfo_x86 * c); - extern void early_intel_workaround(struct cpuinfo_x86 *c); diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index f03b7f94c30..c0c3b59de32 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -12,7 +12,7 @@ /* * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU */ -static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) { unsigned char ccr2, ccr3; unsigned long flags; @@ -52,25 +52,25 @@ static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) * Actually since bugs.h doesn't even reference this perhaps someone should * fix the documentation ??? */ -static unsigned char Cx86_dir0_msb __initdata = 0; +static unsigned char Cx86_dir0_msb __cpuinitdata = 0; -static char Cx86_model[][9] __initdata = { +static char Cx86_model[][9] __cpuinitdata = { "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ", "M II ", "Unknown" }; -static char Cx486_name[][5] __initdata = { +static char Cx486_name[][5] __cpuinitdata = { "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx", "SRx2", "DRx2" }; -static char Cx486S_name[][4] __initdata = { +static char Cx486S_name[][4] __cpuinitdata = { "S", "S2", "Se", "S2e" }; -static char Cx486D_name[][4] __initdata = { +static char Cx486D_name[][4] __cpuinitdata = { "DX", "DX2", "?", "?", "?", "DX4" }; -static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock"; -static char cyrix_model_mult1[] __initdata = "12??43"; -static char cyrix_model_mult2[] __initdata = "12233445"; +static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock"; +static char cyrix_model_mult1[] __cpuinitdata = "12??43"; +static char cyrix_model_mult2[] __cpuinitdata = "12233445"; /* * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old @@ -82,7 +82,7 @@ static char cyrix_model_mult2[] __initdata = "12233445"; extern void calibrate_delay(void) __init; -static void __init check_cx686_slop(struct cpuinfo_x86 *c) +static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c) { unsigned long flags; @@ -107,7 +107,7 @@ static void __init check_cx686_slop(struct cpuinfo_x86 *c) } -static void __init set_cx86_reorder(void) +static void __cpuinit set_cx86_reorder(void) { u8 ccr3; @@ -122,7 +122,7 @@ static void __init set_cx86_reorder(void) setCx86(CX86_CCR3, ccr3); } -static void __init set_cx86_memwb(void) +static void __cpuinit set_cx86_memwb(void) { u32 cr0; @@ -137,7 +137,7 @@ static void __init set_cx86_memwb(void) setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 ); } -static void __init set_cx86_inc(void) +static void __cpuinit set_cx86_inc(void) { unsigned char ccr3; @@ -158,7 +158,7 @@ static void __init set_cx86_inc(void) * Configure later MediaGX and/or Geode processor. */ -static void __init geode_configure(void) +static void __cpuinit geode_configure(void) { unsigned long flags; u8 ccr3, ccr4; @@ -184,14 +184,14 @@ static void __init geode_configure(void) #ifdef CONFIG_PCI -static struct pci_device_id __initdata cyrix_55x0[] = { +static struct pci_device_id __cpuinitdata cyrix_55x0[] = { { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) }, { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) }, { }, }; #endif -static void __init init_cyrix(struct cpuinfo_x86 *c) +static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0; char *buf = c->x86_model_id; @@ -346,7 +346,7 @@ static void __init init_cyrix(struct cpuinfo_x86 *c) /* * Handle National Semiconductor branded processors */ -static void __init init_nsc(struct cpuinfo_x86 *c) +static void __cpuinit init_nsc(struct cpuinfo_x86 *c) { /* There may be GX1 processors in the wild that are branded * NSC and not Cyrix. @@ -394,7 +394,7 @@ static inline int test_cyrix_52div(void) return (unsigned char) (test >> 8) == 0x02; } -static void cyrix_identify(struct cpuinfo_x86 * c) +static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) { /* Detect Cyrix with disabled CPUID */ if ( c->x86 == 4 && test_cyrix_52div() ) { @@ -427,10 +427,9 @@ static void cyrix_identify(struct cpuinfo_x86 * c) local_irq_restore(flags); } } - generic_identify(c); } -static struct cpu_dev cyrix_cpu_dev __initdata = { +static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_vendor = "Cyrix", .c_ident = { "CyrixInstead" }, .c_init = init_cyrix, @@ -453,11 +452,10 @@ static int __init cyrix_exit_cpu(void) late_initcall(cyrix_exit_cpu); -static struct cpu_dev nsc_cpu_dev __initdata = { +static struct cpu_dev nsc_cpu_dev __cpuinitdata = { .c_vendor = "NSC", .c_ident = { "Geode by NSC" }, .c_init = init_nsc, - .c_identify = generic_identify, }; int __init nsc_init_cpu(void) diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index 5a2e270924b..94a95aa5227 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -198,7 +198,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) } -static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size) +static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned int size) { /* Intel PIII Tualatin. This comes in two flavours. * One has 256kb of cache, the other 512. We have no way @@ -263,7 +263,6 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = { }, }, .c_init = init_intel, - .c_identify = generic_identify, .c_size_cache = intel_size_cache, }; diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/i386/kernel/cpu/mcheck/Makefile index 30808f3d671..f1ebe1c1c17 100644 --- a/arch/i386/kernel/cpu/mcheck/Makefile +++ b/arch/i386/kernel/cpu/mcheck/Makefile @@ -1,2 +1,2 @@ -obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o +obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o therm_throt.o obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index b95f1b3d53a..504434a4601 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -13,6 +13,8 @@ #include <asm/msr.h> #include <asm/apic.h> +#include <asm/therm_throt.h> + #include "mce.h" /* as supported by the P4/Xeon family */ @@ -44,25 +46,12 @@ static void unexpected_thermal_interrupt(struct pt_regs *regs) /* P4/Xeon Thermal transition interrupt handler */ static void intel_thermal_interrupt(struct pt_regs *regs) { - u32 l, h; - unsigned int cpu = smp_processor_id(); - static unsigned long next[NR_CPUS]; + __u64 msr_val; ack_APIC_irq(); - if (time_after(next[cpu], jiffies)) - return; - - next[cpu] = jiffies + HZ*5; - rdmsr(MSR_IA32_THERM_STATUS, l, h); - if (l & 0x1) { - printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu); - printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n", - cpu); - add_taint(TAINT_MACHINE_CHECK); - } else { - printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu); - } + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + therm_throt_process(msr_val & 0x1); } /* Thermal interrupt handler for this CPU setup */ @@ -122,10 +111,13 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) rdmsr (MSR_IA32_MISC_ENABLE, l, h); wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h); - + l = apic_read (APIC_LVTTHMR); apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED); printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); return; } #endif /* CONFIG_X86_MCE_P4THERMAL */ diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c new file mode 100644 index 00000000000..4f43047de40 --- /dev/null +++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c @@ -0,0 +1,180 @@ +/* + * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c + * + * Thermal throttle event support code (such as syslog messaging and rate + * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c). + * This allows consistent reporting of CPU thermal throttle events. + * + * Maintains a counter in /sys that keeps track of the number of thermal + * events, such that the user knows how bad the thermal problem might be + * (since the logging to syslog and mcelog is rate limited). + * + * Author: Dmitriy Zavin (dmitriyz@google.com) + * + * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c. + * Inspired by Ross Biro's and Al Borchers' counter code. + */ + +#include <linux/percpu.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> +#include <asm/cpu.h> +#include <linux/notifier.h> +#include <asm/therm_throt.h> + +/* How long to wait between reporting thermal events */ +#define CHECK_INTERVAL (300 * HZ) + +static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES; +static DEFINE_PER_CPU(unsigned long, thermal_throttle_count); +atomic_t therm_throt_en = ATOMIC_INIT(0); + +#ifdef CONFIG_SYSFS +#define define_therm_throt_sysdev_one_ro(_name) \ + static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL) + +#define define_therm_throt_sysdev_show_func(name) \ +static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \ + char *buf) \ +{ \ + unsigned int cpu = dev->id; \ + ssize_t ret; \ + \ + preempt_disable(); /* CPU hotplug */ \ + if (cpu_online(cpu)) \ + ret = sprintf(buf, "%lu\n", \ + per_cpu(thermal_throttle_##name, cpu)); \ + else \ + ret = 0; \ + preempt_enable(); \ + \ + return ret; \ +} + +define_therm_throt_sysdev_show_func(count); +define_therm_throt_sysdev_one_ro(count); + +static struct attribute *thermal_throttle_attrs[] = { + &attr_count.attr, + NULL +}; + +static struct attribute_group thermal_throttle_attr_group = { + .attrs = thermal_throttle_attrs, + .name = "thermal_throttle" +}; +#endif /* CONFIG_SYSFS */ + +/*** + * therm_throt_process - Process thermal throttling event from interrupt + * @curr: Whether the condition is current or not (boolean), since the + * thermal interrupt normally gets called both when the thermal + * event begins and once the event has ended. + * + * This function is called by the thermal interrupt after the + * IRQ has been acknowledged. + * + * It will take care of rate limiting and printing messages to the syslog. + * + * Returns: 0 : Event should NOT be further logged, i.e. still in + * "timeout" from previous log message. + * 1 : Event should be logged further, and a message has been + * printed to the syslog. + */ +int therm_throt_process(int curr) +{ + unsigned int cpu = smp_processor_id(); + __u64 tmp_jiffs = get_jiffies_64(); + + if (curr) + __get_cpu_var(thermal_throttle_count)++; + + if (time_before64(tmp_jiffs, __get_cpu_var(next_check))) + return 0; + + __get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL; + + /* if we just entered the thermal event */ + if (curr) { + printk(KERN_CRIT "CPU%d: Temperature above threshold, " + "cpu clock throttled (total events = %lu)\n", cpu, + __get_cpu_var(thermal_throttle_count)); + + add_taint(TAINT_MACHINE_CHECK); + } else { + printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu); + } + + return 1; +} + +#ifdef CONFIG_SYSFS +/* Add/Remove thermal_throttle interface for CPU device */ +static __cpuinit int thermal_throttle_add_dev(struct sys_device * sys_dev) +{ + sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group); + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU +static __cpuinit int thermal_throttle_remove_dev(struct sys_device * sys_dev) +{ + sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group); + return 0; +} + +/* Mutex protecting device creation against CPU hotplug */ +static DEFINE_MUTEX(therm_cpu_lock); + +/* Get notified when a cpu comes on/off. Be hotplug friendly. */ +static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb, + unsigned long action, + void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + mutex_lock(&therm_cpu_lock); + switch (action) { + case CPU_ONLINE: + thermal_throttle_add_dev(sys_dev); + break; + case CPU_DEAD: + thermal_throttle_remove_dev(sys_dev); + break; + } + mutex_unlock(&therm_cpu_lock); + return NOTIFY_OK; +} + +static struct notifier_block thermal_throttle_cpu_notifier = +{ + .notifier_call = thermal_throttle_cpu_callback, +}; +#endif /* CONFIG_HOTPLUG_CPU */ + +static __init int thermal_throttle_init_device(void) +{ + unsigned int cpu = 0; + + if (!atomic_read(&therm_throt_en)) + return 0; + + register_hotcpu_notifier(&thermal_throttle_cpu_notifier); + +#ifdef CONFIG_HOTPLUG_CPU + mutex_lock(&therm_cpu_lock); +#endif + /* connect live CPUs to sysfs */ + for_each_online_cpu(cpu) + thermal_throttle_add_dev(get_cpu_sysdev(cpu)); +#ifdef CONFIG_HOTPLUG_CPU + mutex_unlock(&therm_cpu_lock); +#endif + + return 0; +} + +device_initcall(thermal_throttle_init_device); +#endif /* CONFIG_SYSFS */ diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/i386/kernel/cpu/mtrr/generic.c index 169ac8e0db6..0b61eed8bbd 100644 --- a/arch/i386/kernel/cpu/mtrr/generic.c +++ b/arch/i386/kernel/cpu/mtrr/generic.c @@ -243,7 +243,7 @@ static DEFINE_SPINLOCK(set_atomicity_lock); * has been called. */ -static void prepare_set(void) +static void prepare_set(void) __acquires(set_atomicity_lock) { unsigned long cr0; @@ -274,7 +274,7 @@ static void prepare_set(void) mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & 0xf300UL, deftype_hi); } -static void post_set(void) +static void post_set(void) __releases(set_atomicity_lock) { /* Flush TLBs (no need to flush caches - they are disabled) */ __flush_tlb(); diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/i386/kernel/cpu/nexgen.c index ad87fa58058..8bf23cc80c6 100644 --- a/arch/i386/kernel/cpu/nexgen.c +++ b/arch/i386/kernel/cpu/nexgen.c @@ -10,7 +10,7 @@ * to have CPUID. (Thanks to Herbert Oppmann) */ -static int __init deep_magic_nexgen_probe(void) +static int __cpuinit deep_magic_nexgen_probe(void) { int ret; @@ -27,21 +27,20 @@ static int __init deep_magic_nexgen_probe(void) return ret; } -static void __init init_nexgen(struct cpuinfo_x86 * c) +static void __cpuinit init_nexgen(struct cpuinfo_x86 * c) { c->x86_cache_size = 256; /* A few had 1 MB... */ } -static void __init nexgen_identify(struct cpuinfo_x86 * c) +static void __cpuinit nexgen_identify(struct cpuinfo_x86 * c) { /* Detect NexGen with old hypercode */ if ( deep_magic_nexgen_probe() ) { strcpy(c->x86_vendor_id, "NexGenDriven"); } - generic_identify(c); } -static struct cpu_dev nexgen_cpu_dev __initdata = { +static struct cpu_dev nexgen_cpu_dev __cpuinitdata = { .c_vendor = "Nexgen", .c_ident = { "NexGenDriven" }, .c_models = { diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index f54a15268ed..76aac088a32 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -46,8 +46,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", - "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ diff --git a/arch/i386/kernel/cpu/rise.c b/arch/i386/kernel/cpu/rise.c index d08d5a2811c..9317f741498 100644 --- a/arch/i386/kernel/cpu/rise.c +++ b/arch/i386/kernel/cpu/rise.c @@ -5,7 +5,7 @@ #include "cpu.h" -static void __init init_rise(struct cpuinfo_x86 *c) +static void __cpuinit init_rise(struct cpuinfo_x86 *c) { printk("CPU: Rise iDragon"); if (c->x86_model > 2) @@ -28,7 +28,7 @@ static void __init init_rise(struct cpuinfo_x86 *c) set_bit(X86_FEATURE_CX8, c->x86_capability); } -static struct cpu_dev rise_cpu_dev __initdata = { +static struct cpu_dev rise_cpu_dev __cpuinitdata = { .c_vendor = "Rise", .c_ident = { "RiseRiseRise" }, .c_models = { diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index 7214c9b577a..4056fb7d2cd 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -5,7 +5,7 @@ #include <asm/msr.h> #include "cpu.h" -static void __init init_transmeta(struct cpuinfo_x86 *c) +static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; unsigned int cms_rev1, cms_rev2; @@ -85,10 +85,9 @@ static void __init init_transmeta(struct cpuinfo_x86 *c) #endif } -static void __init transmeta_identify(struct cpuinfo_x86 * c) +static void __cpuinit transmeta_identify(struct cpuinfo_x86 * c) { u32 xlvl; - generic_identify(c); /* Transmeta-defined flags: level 0x80860001 */ xlvl = cpuid_eax(0x80860000); @@ -98,7 +97,7 @@ static void __init transmeta_identify(struct cpuinfo_x86 * c) } } -static struct cpu_dev transmeta_cpu_dev __initdata = { +static struct cpu_dev transmeta_cpu_dev __cpuinitdata = { .c_vendor = "Transmeta", .c_ident = { "GenuineTMx86", "TransmetaCPU" }, .c_init = init_transmeta, diff --git a/arch/i386/kernel/cpu/umc.c b/arch/i386/kernel/cpu/umc.c index 2cd988f6dc5..1bf3f87e9c5 100644 --- a/arch/i386/kernel/cpu/umc.c +++ b/arch/i386/kernel/cpu/umc.c @@ -5,12 +5,8 @@ /* UMC chips appear to be only either 386 or 486, so no special init takes place. */ -static void __init init_umc(struct cpuinfo_x86 * c) -{ - -} -static struct cpu_dev umc_cpu_dev __initdata = { +static struct cpu_dev umc_cpu_dev __cpuinitdata = { .c_vendor = "UMC", .c_ident = { "UMC UMC UMC" }, .c_models = { @@ -21,7 +17,6 @@ static struct cpu_dev umc_cpu_dev __initdata = { } }, }, - .c_init = init_umc, }; int __init umc_init_cpu(void) diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index 5b96f038367..67d297dc100 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -22,6 +22,8 @@ #include <asm/nmi.h> #include <asm/hw_irq.h> #include <asm/apic.h> +#include <asm/kdebug.h> + #include <mach_ipi.h> @@ -93,16 +95,25 @@ static void crash_save_self(struct pt_regs *regs) #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC) static atomic_t waiting_for_crash_ipi; -static int crash_nmi_callback(struct pt_regs *regs, int cpu) +static int crash_nmi_callback(struct notifier_block *self, + unsigned long val, void *data) { + struct pt_regs *regs; struct pt_regs fixed_regs; + int cpu; + + if (val != DIE_NMI_IPI) + return NOTIFY_OK; + + regs = ((struct die_args *)data)->regs; + cpu = raw_smp_processor_id(); /* Don't do anything if this handler is invoked on crashing cpu. * Otherwise, system will completely hang. Crashing cpu can get * an NMI if system was initially booted with nmi_watchdog parameter. */ if (cpu == crashing_cpu) - return 1; + return NOTIFY_STOP; local_irq_disable(); if (!user_mode_vm(regs)) { @@ -125,13 +136,18 @@ static void smp_send_nmi_allbutself(void) send_IPI_allbutself(NMI_VECTOR); } +static struct notifier_block crash_nmi_nb = { + .notifier_call = crash_nmi_callback, +}; + static void nmi_shootdown_cpus(void) { unsigned long msecs; atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); /* Would it be better to replace the trap vector here? */ - set_nmi_callback(crash_nmi_callback); + if (register_die_notifier(&crash_nmi_nb)) + return; /* return what? */ /* Ensure the new callback function is set before sending * out the NMI */ diff --git a/arch/i386/kernel/efi_stub.S b/arch/i386/kernel/efi_stub.S index d3ee73a3eee..ef00bb77d7e 100644 --- a/arch/i386/kernel/efi_stub.S +++ b/arch/i386/kernel/efi_stub.S @@ -7,7 +7,6 @@ #include <linux/linkage.h> #include <asm/page.h> -#include <asm/pgtable.h> /* * efi_call_phys(void *, ...) is a function with variable parameters. diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 87f9f60b803..5a63d6fdb70 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -76,8 +76,15 @@ DF_MASK = 0x00000400 NT_MASK = 0x00004000 VM_MASK = 0x00020000 +/* These are replaces for paravirtualization */ +#define DISABLE_INTERRUPTS cli +#define ENABLE_INTERRUPTS sti +#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit +#define INTERRUPT_RETURN iret +#define GET_CR0_INTO_EAX movl %cr0, %eax + #ifdef CONFIG_PREEMPT -#define preempt_stop cli; TRACE_IRQS_OFF +#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF #else #define preempt_stop #define resume_kernel restore_nocheck @@ -176,18 +183,21 @@ VM_MASK = 0x00020000 #define RING0_INT_FRAME \ CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ CFI_DEF_CFA esp, 3*4;\ /*CFI_OFFSET cs, -2*4;*/\ CFI_OFFSET eip, -3*4 #define RING0_EC_FRAME \ CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ CFI_DEF_CFA esp, 4*4;\ /*CFI_OFFSET cs, -2*4;*/\ CFI_OFFSET eip, -3*4 #define RING0_PTREGS_FRAME \ CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ CFI_DEF_CFA esp, OLDESP-EBX;\ /*CFI_OFFSET cs, CS-OLDESP;*/\ CFI_OFFSET eip, EIP-OLDESP;\ @@ -233,10 +243,11 @@ ret_from_intr: check_userspace: movl EFLAGS(%esp), %eax # mix EFLAGS and CS movb CS(%esp), %al - testl $(VM_MASK | 3), %eax - jz resume_kernel + andl $(VM_MASK | SEGMENT_RPL_MASK), %eax + cmpl $USER_RPL, %eax + jb resume_kernel # not returning to v8086 or userspace ENTRY(resume_userspace) - cli # make sure we don't miss an interrupt + DISABLE_INTERRUPTS # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret movl TI_flags(%ebp), %ecx @@ -247,7 +258,7 @@ ENTRY(resume_userspace) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) - cli + DISABLE_INTERRUPTS cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? jnz restore_nocheck need_resched: @@ -267,6 +278,7 @@ need_resched: # sysenter call handler stub ENTRY(sysenter_entry) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA esp, 0 CFI_REGISTER esp, ebp movl TSS_sysenter_esp0(%esp),%esp @@ -275,7 +287,7 @@ sysenter_past_esp: * No need to follow this irqs on/off section: the syscall * disabled irqs and here we enable it straight after entry: */ - sti + ENABLE_INTERRUPTS pushl $(__USER_DS) CFI_ADJUST_CFA_OFFSET 4 /*CFI_REL_OFFSET ss, 0*/ @@ -320,7 +332,7 @@ sysenter_past_esp: jae syscall_badsys call *sys_call_table(,%eax,4) movl %eax,EAX(%esp) - cli + DISABLE_INTERRUPTS TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx testw $_TIF_ALLWORK_MASK, %cx @@ -330,8 +342,7 @@ sysenter_past_esp: movl OLDESP(%esp), %ecx xorl %ebp,%ebp TRACE_IRQS_ON - sti - sysexit + ENABLE_INTERRUPTS_SYSEXIT CFI_ENDPROC @@ -356,7 +367,7 @@ syscall_call: call *sys_call_table(,%eax,4) movl %eax,EAX(%esp) # store the return value syscall_exit: - cli # make sure we don't miss an interrupt + DISABLE_INTERRUPTS # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret TRACE_IRQS_OFF @@ -371,8 +382,8 @@ restore_all: # See comments in process.c:copy_thread() for details. movb OLDSS(%esp), %ah movb CS(%esp), %al - andl $(VM_MASK | (4 << 8) | 3), %eax - cmpl $((4 << 8) | 3), %eax + andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax + cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS restore_nocheck: @@ -381,11 +392,11 @@ restore_nocheck_notrace: RESTORE_REGS addl $4, %esp CFI_ADJUST_CFA_OFFSET -4 -1: iret +1: INTERRUPT_RETURN .section .fixup,"ax" iret_exc: TRACE_IRQS_ON - sti + ENABLE_INTERRUPTS pushl $0 # no error code pushl $do_iret_error jmp error_code @@ -409,7 +420,7 @@ ldt_ss: * dosemu and wine happy. */ subl $8, %esp # reserve space for switch16 pointer CFI_ADJUST_CFA_OFFSET 8 - cli + DISABLE_INTERRUPTS TRACE_IRQS_OFF movl %esp, %eax /* Set up the 16bit stack frame with switch32 pointer on top, @@ -419,7 +430,7 @@ ldt_ss: TRACE_IRQS_IRET RESTORE_REGS lss 20+4(%esp), %esp # switch to 16bit stack -1: iret +1: INTERRUPT_RETURN .section __ex_table,"a" .align 4 .long 1b,iret_exc @@ -434,7 +445,7 @@ work_pending: jz work_notifysig work_resched: call schedule - cli # make sure we don't miss an interrupt + DISABLE_INTERRUPTS # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret TRACE_IRQS_OFF @@ -490,7 +501,7 @@ syscall_exit_work: testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl jz work_pending TRACE_IRQS_ON - sti # could let do_syscall_trace() call + ENABLE_INTERRUPTS # could let do_syscall_trace() call # schedule() instead movl %esp, %eax movl $1, %edx @@ -591,11 +602,9 @@ ENTRY(name) \ /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" -ENTRY(divide_error) - RING0_INT_FRAME - pushl $0 # no error code - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_divide_error +KPROBE_ENTRY(page_fault) + RING0_EC_FRAME + pushl $do_page_fault CFI_ADJUST_CFA_OFFSET 4 ALIGN error_code: @@ -645,6 +654,7 @@ error_code: call *%edi jmp ret_from_exception CFI_ENDPROC +KPROBE_END(page_fault) ENTRY(coprocessor_error) RING0_INT_FRAME @@ -669,7 +679,7 @@ ENTRY(device_not_available) pushl $-1 # mark this as an int CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL - movl %cr0, %eax + GET_CR0_INTO_EAX testl $0x4, %eax # EM (math emulation bit) jne device_not_available_emulate preempt_stop @@ -702,9 +712,15 @@ device_not_available_emulate: jne ok; \ label: \ movl TSS_sysenter_esp0+offset(%esp),%esp; \ + CFI_DEF_CFA esp, 0; \ + CFI_UNDEFINED eip; \ pushfl; \ + CFI_ADJUST_CFA_OFFSET 4; \ pushl $__KERNEL_CS; \ - pushl $sysenter_past_esp + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $sysenter_past_esp; \ + CFI_ADJUST_CFA_OFFSET 4; \ + CFI_REL_OFFSET eip, 0 KPROBE_ENTRY(debug) RING0_INT_FRAME @@ -720,7 +736,8 @@ debug_stack_correct: call do_debug jmp ret_from_exception CFI_ENDPROC - .previous .text +KPROBE_END(debug) + /* * NMI is doubly nasty. It can happen _while_ we're handling * a debug fault, and the debug fault hasn't yet been able to @@ -729,7 +746,7 @@ debug_stack_correct: * check whether we got an NMI on the debug path where the debug * fault happened on the sysenter path. */ -ENTRY(nmi) +KPROBE_ENTRY(nmi) RING0_INT_FRAME pushl %eax CFI_ADJUST_CFA_OFFSET 4 @@ -754,6 +771,7 @@ ENTRY(nmi) cmpl $sysenter_entry,12(%esp) je nmi_debug_stack_check nmi_stack_correct: + /* We have a RING0_INT_FRAME here */ pushl %eax CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL @@ -764,9 +782,12 @@ nmi_stack_correct: CFI_ENDPROC nmi_stack_fixup: + RING0_INT_FRAME FIX_STACK(12,nmi_stack_correct, 1) jmp nmi_stack_correct + nmi_debug_stack_check: + /* We have a RING0_INT_FRAME here */ cmpw $__KERNEL_CS,16(%esp) jne nmi_stack_correct cmpl $debug,(%esp) @@ -777,8 +798,10 @@ nmi_debug_stack_check: jmp nmi_stack_correct nmi_16bit_stack: - RING0_INT_FRAME - /* create the pointer to lss back */ + /* We have a RING0_INT_FRAME here. + * + * create the pointer to lss back + */ pushl %ss CFI_ADJUST_CFA_OFFSET 4 pushl %esp @@ -799,12 +822,13 @@ nmi_16bit_stack: call do_nmi RESTORE_REGS lss 12+4(%esp), %esp # back to 16bit stack -1: iret +1: INTERRUPT_RETURN CFI_ENDPROC .section __ex_table,"a" .align 4 .long 1b,iret_exc .previous +KPROBE_END(nmi) KPROBE_ENTRY(int3) RING0_INT_FRAME @@ -816,7 +840,7 @@ KPROBE_ENTRY(int3) call do_int3 jmp ret_from_exception CFI_ENDPROC - .previous .text +KPROBE_END(int3) ENTRY(overflow) RING0_INT_FRAME @@ -881,7 +905,7 @@ KPROBE_ENTRY(general_protection) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC - .previous .text +KPROBE_END(general_protection) ENTRY(alignment_check) RING0_EC_FRAME @@ -890,13 +914,14 @@ ENTRY(alignment_check) jmp error_code CFI_ENDPROC -KPROBE_ENTRY(page_fault) - RING0_EC_FRAME - pushl $do_page_fault +ENTRY(divide_error) + RING0_INT_FRAME + pushl $0 # no error code + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_divide_error CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC - .previous .text #ifdef CONFIG_X86_MCE ENTRY(machine_check) @@ -949,6 +974,19 @@ ENTRY(arch_unwind_init_running) ENDPROC(arch_unwind_init_running) #endif +ENTRY(kernel_thread_helper) + pushl $0 # fake return address for unwinder + CFI_STARTPROC + movl %edx,%eax + push %edx + CFI_ADJUST_CFA_OFFSET 4 + call *%ebx + push %eax + CFI_ADJUST_CFA_OFFSET 4 + call do_exit + CFI_ENDPROC +ENDPROC(kernel_thread_helper) + .section .rodata,"a" #include "syscall_table.S" diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index a6b8bd89aa2..be9d883c62c 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -371,8 +371,65 @@ rp_sidt: addl $8,%edi dec %ecx jne rp_sidt + +.macro set_early_handler handler,trapno + lea \handler,%edx + movl $(__KERNEL_CS << 16),%eax + movw %dx,%ax + movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ + lea idt_table,%edi + movl %eax,8*\trapno(%edi) + movl %edx,8*\trapno+4(%edi) +.endm + + set_early_handler handler=early_divide_err,trapno=0 + set_early_handler handler=early_illegal_opcode,trapno=6 + set_early_handler handler=early_protection_fault,trapno=13 + set_early_handler handler=early_page_fault,trapno=14 + ret +early_divide_err: + xor %edx,%edx + pushl $0 /* fake errcode */ + jmp early_fault + +early_illegal_opcode: + movl $6,%edx + pushl $0 /* fake errcode */ + jmp early_fault + +early_protection_fault: + movl $13,%edx + jmp early_fault + +early_page_fault: + movl $14,%edx + jmp early_fault + +early_fault: + cld +#ifdef CONFIG_PRINTK + movl $(__KERNEL_DS),%eax + movl %eax,%ds + movl %eax,%es + cmpl $2,early_recursion_flag + je hlt_loop + incl early_recursion_flag + movl %cr2,%eax + pushl %eax + pushl %edx /* trapno */ + pushl $fault_msg +#ifdef CONFIG_EARLY_PRINTK + call early_printk +#else + call printk +#endif +#endif +hlt_loop: + hlt + jmp hlt_loop + /* This is the default interrupt "handler" :-) */ ALIGN ignore_int: @@ -386,6 +443,9 @@ ignore_int: movl $(__KERNEL_DS),%eax movl %eax,%ds movl %eax,%es + cmpl $2,early_recursion_flag + je hlt_loop + incl early_recursion_flag pushl 16(%esp) pushl 24(%esp) pushl 32(%esp) @@ -431,9 +491,16 @@ ENTRY(stack_start) ready: .byte 0 +early_recursion_flag: + .long 0 + int_msg: .asciz "Unknown interrupt or fault at EIP %p %p %p\n" +fault_msg: + .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n" + .asciz "Stack: %p %p %p %p %p %p %p %p\n" + /* * The IDT and GDT 'descriptors' are a strange 48-bit object * only used by the lidt and lgdt instructions. They are not diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index d4756d154f4..ea5f4e7958d 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -45,6 +45,8 @@ static void end_8259A_irq (unsigned int irq) #define shutdown_8259A_irq disable_8259A_irq +static int i8259A_auto_eoi; + static void mask_and_ack_8259A(unsigned int); unsigned int startup_8259A_irq(unsigned int irq) @@ -253,7 +255,7 @@ static void save_ELCR(char *trigger) static int i8259A_resume(struct sys_device *dev) { - init_8259A(0); + init_8259A(i8259A_auto_eoi); restore_ELCR(irq_trigger); return 0; } @@ -301,6 +303,8 @@ void init_8259A(int auto_eoi) { unsigned long flags; + i8259A_auto_eoi = auto_eoi; + spin_lock_irqsave(&i8259A_lock, flags); outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 4fb32c551fe..fd0df75cfbd 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -40,6 +40,7 @@ #include <asm/nmi.h> #include <mach_apic.h> +#include <mach_apicdef.h> #include "io_ports.h" @@ -65,7 +66,7 @@ int sis_apic_bug = -1; */ int nr_ioapic_registers[MAX_IO_APICS]; -int disable_timer_pin_1 __initdata; +static int disable_timer_pin_1 __initdata; /* * Rough estimation of how many shared IRQs there are, can @@ -93,6 +94,34 @@ int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #define vector_to_irq(vector) (vector) #endif + +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + return eu.entry; +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + union entry_union eu; + eu.entry = e; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -200,13 +229,9 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - unsigned long flags; /* Check delivery_mode to be sure we're not clearing an SMI pin */ - spin_lock_irqsave(&ioapic_lock, flags); - *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; @@ -215,10 +240,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) */ memset(&entry, 0, sizeof(entry)); entry.mask = 1; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0)); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry); } static void clear_IO_APIC (void) @@ -1283,9 +1305,8 @@ static void __init setup_IO_APIC_irqs(void) if (!apic && (irq < 16)) disable_8259A_irq(irq); } + ioapic_write_entry(apic, pin, entry); spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -1301,7 +1322,6 @@ static void __init setup_IO_APIC_irqs(void) static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) { struct IO_APIC_route_entry entry; - unsigned long flags; memset(&entry,0,sizeof(entry)); @@ -1331,10 +1351,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * Add it to the IO-APIC irq-routing table: */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry); enable_8259A_irq(0); } @@ -1444,10 +1461,7 @@ void __init print_IO_APIC(void) for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2); - *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, i); printk(KERN_DEBUG " %02x %03X %02X ", i, @@ -1666,10 +1680,7 @@ static void __init enable_IO_APIC(void) /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { struct IO_APIC_route_entry entry; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, pin); /* If the interrupt line is enabled and in ExtInt mode @@ -1726,7 +1737,6 @@ void disable_IO_APIC(void) */ if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; - unsigned long flags; memset(&entry, 0, sizeof(entry)); entry.mask = 0; /* Enabled */ @@ -1743,12 +1753,7 @@ void disable_IO_APIC(void) /* * Add it to the IO-APIC irq-routing table: */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, - *(((int *)&entry)+1)); - io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, - *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); } disconnect_bsp_APIC(ioapic_i8259.pin != -1); } @@ -2213,17 +2218,13 @@ static inline void unlock_ExtINT_logic(void) int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; unsigned char save_control, save_freq_select; - unsigned long flags; pin = find_isa_irq_pin(8, mp_INT); apic = find_isa_irq_apic(8, mp_INT); if (pin == -1) return; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry0 = ioapic_read_entry(apic, pin); clear_IO_APIC_pin(apic, pin); memset(&entry1, 0, sizeof(entry1)); @@ -2236,10 +2237,7 @@ static inline void unlock_ExtINT_logic(void) entry1.trigger = 0; entry1.vector = 0; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry1); save_control = CMOS_READ(RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); @@ -2258,10 +2256,7 @@ static inline void unlock_ExtINT_logic(void) CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); clear_IO_APIC_pin(apic, pin); - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry0); } int timer_uses_ioapic_pin_0; @@ -2461,17 +2456,12 @@ static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; - unsigned long flags; int i; data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - spin_lock_irqsave(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { - *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i); - *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i); - } - spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + entry[i] = ioapic_read_entry(dev->id, i); return 0; } @@ -2493,11 +2483,9 @@ static int ioapic_resume(struct sys_device *dev) reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; io_apic_write(dev->id, 0, reg_00.raw); } - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { - io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1)); - io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0)); - } spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + ioapic_write_entry(dev->id, i, entry[i]); return 0; } @@ -2694,9 +2682,8 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a if (!ioapic && (irq < 16)) disable_8259A_irq(irq); + ioapic_write_entry(ioapic, pin, entry); spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2704,3 +2691,25 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a } #endif /* CONFIG_ACPI */ + +static int __init parse_disable_timer_pin_1(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", parse_disable_timer_pin_1); + +static int __init parse_enable_timer_pin_1(char *arg) +{ + disable_timer_pin_1 = -1; + return 0; +} +early_param("enable_timer_pin_1", parse_enable_timer_pin_1); + +static int __init parse_noapic(char *arg) +{ + /* disable IO-APIC */ + disable_ioapic_setup(); + return 0; +} +early_param("noapic", parse_noapic); diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c index 6b1ae6ba76f..91966bafb3d 100644 --- a/arch/i386/kernel/machine_kexec.c +++ b/arch/i386/kernel/machine_kexec.c @@ -9,6 +9,7 @@ #include <linux/mm.h> #include <linux/kexec.h> #include <linux/delay.h> +#include <linux/init.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> @@ -20,70 +21,13 @@ #include <asm/system.h> #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) - -#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) -#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) -#define L2_ATTR (_PAGE_PRESENT) - -#define LEVEL0_SIZE (1UL << 12UL) - -#ifndef CONFIG_X86_PAE -#define LEVEL1_SIZE (1UL << 22UL) -static u32 pgtable_level1[1024] PAGE_ALIGNED; - -static void identity_map_page(unsigned long address) -{ - unsigned long level1_index, level2_index; - u32 *pgtable_level2; - - /* Find the current page table */ - pgtable_level2 = __va(read_cr3()); - - /* Find the indexes of the physical address to identity map */ - level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE; - level2_index = address / LEVEL1_SIZE; - - /* Identity map the page table entry */ - pgtable_level1[level1_index] = address | L0_ATTR; - pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR; - - /* Flush the tlb so the new mapping takes effect. - * Global tlb entries are not flushed but that is not an issue. - */ - load_cr3(pgtable_level2); -} - -#else -#define LEVEL1_SIZE (1UL << 21UL) -#define LEVEL2_SIZE (1UL << 30UL) -static u64 pgtable_level1[512] PAGE_ALIGNED; -static u64 pgtable_level2[512] PAGE_ALIGNED; - -static void identity_map_page(unsigned long address) -{ - unsigned long level1_index, level2_index, level3_index; - u64 *pgtable_level3; - - /* Find the current page table */ - pgtable_level3 = __va(read_cr3()); - - /* Find the indexes of the physical address to identity map */ - level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE; - level2_index = (address % LEVEL2_SIZE)/LEVEL1_SIZE; - level3_index = address / LEVEL2_SIZE; - - /* Identity map the page table entry */ - pgtable_level1[level1_index] = address | L0_ATTR; - pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR; - set_64bit(&pgtable_level3[level3_index], - __pa(pgtable_level2) | L2_ATTR); - - /* Flush the tlb so the new mapping takes effect. - * Global tlb entries are not flushed but that is not an issue. - */ - load_cr3(pgtable_level3); -} +static u32 kexec_pgd[1024] PAGE_ALIGNED; +#ifdef CONFIG_X86_PAE +static u32 kexec_pmd0[1024] PAGE_ALIGNED; +static u32 kexec_pmd1[1024] PAGE_ALIGNED; #endif +static u32 kexec_pte0[1024] PAGE_ALIGNED; +static u32 kexec_pte1[1024] PAGE_ALIGNED; static void set_idt(void *newidt, __u16 limit) { @@ -127,16 +71,6 @@ static void load_segments(void) #undef __STR } -typedef asmlinkage NORET_TYPE void (*relocate_new_kernel_t)( - unsigned long indirection_page, - unsigned long reboot_code_buffer, - unsigned long start_address, - unsigned int has_pae) ATTRIB_NORET; - -extern const unsigned char relocate_new_kernel[]; -extern void relocate_new_kernel_end(void); -extern const unsigned int relocate_new_kernel_size; - /* * A architecture hook called to validate the * proposed image and prepare the control pages @@ -169,25 +103,29 @@ void machine_kexec_cleanup(struct kimage *image) */ NORET_TYPE void machine_kexec(struct kimage *image) { - unsigned long page_list; - unsigned long reboot_code_buffer; - - relocate_new_kernel_t rnk; + unsigned long page_list[PAGES_NR]; + void *control_page; /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); - /* Compute some offsets */ - reboot_code_buffer = page_to_pfn(image->control_code_page) - << PAGE_SHIFT; - page_list = image->head; - - /* Set up an identity mapping for the reboot_code_buffer */ - identity_map_page(reboot_code_buffer); - - /* copy it out */ - memcpy((void *)reboot_code_buffer, relocate_new_kernel, - relocate_new_kernel_size); + control_page = page_address(image->control_code_page); + memcpy(control_page, relocate_kernel, PAGE_SIZE); + + page_list[PA_CONTROL_PAGE] = __pa(control_page); + page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[PA_PGD] = __pa(kexec_pgd); + page_list[VA_PGD] = (unsigned long)kexec_pgd; +#ifdef CONFIG_X86_PAE + page_list[PA_PMD_0] = __pa(kexec_pmd0); + page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; + page_list[PA_PMD_1] = __pa(kexec_pmd1); + page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; +#endif + page_list[PA_PTE_0] = __pa(kexec_pte0); + page_list[VA_PTE_0] = (unsigned long)kexec_pte0; + page_list[PA_PTE_1] = __pa(kexec_pte1); + page_list[VA_PTE_1] = (unsigned long)kexec_pte1; /* The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -206,6 +144,28 @@ NORET_TYPE void machine_kexec(struct kimage *image) set_idt(phys_to_virt(0),0); /* now call it */ - rnk = (relocate_new_kernel_t) reboot_code_buffer; - (*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae); + relocate_kernel((unsigned long)image->head, (unsigned long)page_list, + image->start, cpu_has_pae); +} + +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never sets it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init parse_crashkernel(char *arg) +{ + unsigned long size, base; + size = memparse(arg, &arg); + if (*arg == '@') { + base = memparse(arg+1, &arg); + /* FIXME: Do I want a sanity check + * to validate the memory range? + */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; } +early_param("crashkernel", parse_crashkernel); diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c index cd5456f14af..eb57a851789 100644 --- a/arch/i386/kernel/mca.c +++ b/arch/i386/kernel/mca.c @@ -42,6 +42,7 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/mca.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/io.h> #include <linux/proc_fs.h> @@ -414,7 +415,8 @@ subsys_initcall(mca_init); /*--------------------------------------------------------------------*/ -static void mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) +static __kprobes void +mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) { int slot = mca_dev->slot; @@ -444,7 +446,7 @@ static void mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) /*--------------------------------------------------------------------*/ -static int mca_handle_nmi_callback(struct device *dev, void *data) +static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data) { struct mca_device *mca_dev = to_mca_device(dev); unsigned char pos5; @@ -462,7 +464,7 @@ static int mca_handle_nmi_callback(struct device *dev, void *data) return 0; } -void mca_handle_nmi(void) +void __kprobes mca_handle_nmi(void) { /* First try - scan the various adapters and see if a specific * adapter was responsible for the error. diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 40b44cc0d14..9b9479768d5 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -2,6 +2,7 @@ * Intel CPU Microcode Update Driver for Linux * * Copyright (C) 2000-2004 Tigran Aivazian + * 2006 Shaohua Li <shaohua.li@intel.com> * * This driver allows to upgrade microcode on Intel processors * belonging to IA-32 family - PentiumPro, Pentium II, @@ -82,6 +83,9 @@ #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> #include <asm/msr.h> #include <asm/uaccess.h> @@ -91,9 +95,6 @@ MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver"); MODULE_AUTHOR("Tigran Aivazian <tigran@veritas.com>"); MODULE_LICENSE("GPL"); -static int verbose; -module_param(verbose, int, 0644); - #define MICROCODE_VERSION "1.14a" #define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */ @@ -120,55 +121,40 @@ static DEFINE_SPINLOCK(microcode_update_lock); /* no concurrent ->write()s are allowed on /dev/cpu/microcode */ static DEFINE_MUTEX(microcode_mutex); -static void __user *user_buffer; /* user area microcode data buffer */ -static unsigned int user_buffer_size; /* it's size */ - -typedef enum mc_error_code { - MC_SUCCESS = 0, - MC_IGNORED = 1, - MC_NOTFOUND = 2, - MC_MARKED = 3, - MC_ALLOCATED = 4, -} mc_error_code_t; - static struct ucode_cpu_info { + int valid; unsigned int sig; - unsigned int pf, orig_pf; + unsigned int pf; unsigned int rev; - unsigned int cksum; - mc_error_code_t err; microcode_t *mc; } ucode_cpu_info[NR_CPUS]; - -static int microcode_open (struct inode *unused1, struct file *unused2) -{ - return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; -} -static void collect_cpu_info (void *unused) +static void collect_cpu_info(int cpu_num) { - int cpu_num = smp_processor_id(); struct cpuinfo_x86 *c = cpu_data + cpu_num; struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; unsigned int val[2]; - uci->sig = uci->pf = uci->rev = uci->cksum = 0; - uci->err = MC_NOTFOUND; + /* We should bind the task to the CPU */ + BUG_ON(raw_smp_processor_id() != cpu_num); + uci->pf = uci->rev = 0; uci->mc = NULL; + uci->valid = 1; if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || cpu_has(c, X86_FEATURE_IA64)) { - printk(KERN_ERR "microcode: CPU%d not a capable Intel processor\n", cpu_num); + printk(KERN_ERR "microcode: CPU%d not a capable Intel " + "processor\n", cpu_num); + uci->valid = 0; return; - } else { - uci->sig = cpuid_eax(0x00000001); + } - if ((c->x86_model >= 5) || (c->x86 > 6)) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - uci->pf = 1 << ((val[1] >> 18) & 7); - } - uci->orig_pf = uci->pf; + uci->sig = cpuid_eax(0x00000001); + + if ((c->x86_model >= 5) || (c->x86 > 6)) { + /* get processor flags from MSR 0x17 */ + rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + uci->pf = 1 << ((val[1] >> 18) & 7); } wrmsr(MSR_IA32_UCODE_REV, 0, 0); @@ -180,218 +166,159 @@ static void collect_cpu_info (void *unused) uci->sig, uci->pf, uci->rev); } -static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_header, int sig, int pf, int cksum) +static inline int microcode_update_match(int cpu_num, + microcode_header_t *mc_header, int sig, int pf) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - pr_debug("Microcode Found.\n"); - pr_debug(" Header Revision 0x%x\n", mc_header->hdrver); - pr_debug(" Loader Revision 0x%x\n", mc_header->ldrver); - pr_debug(" Revision 0x%x \n", mc_header->rev); - pr_debug(" Date %x/%x/%x\n", - ((mc_header->date >> 24 ) & 0xff), - ((mc_header->date >> 16 ) & 0xff), - (mc_header->date & 0xFFFF)); - pr_debug(" Signature 0x%x\n", sig); - pr_debug(" Type 0x%x Family 0x%x Model 0x%x Stepping 0x%x\n", - ((sig >> 12) & 0x3), - ((sig >> 8) & 0xf), - ((sig >> 4) & 0xf), - ((sig & 0xf))); - pr_debug(" Processor Flags 0x%x\n", pf); - pr_debug(" Checksum 0x%x\n", cksum); - - if (mc_header->rev < uci->rev) { - if (uci->err == MC_NOTFOUND) { - uci->err = MC_IGNORED; - uci->cksum = mc_header->rev; - } else if (uci->err == MC_IGNORED && uci->cksum < mc_header->rev) - uci->cksum = mc_header->rev; - } else if (mc_header->rev == uci->rev) { - if (uci->err < MC_MARKED) { - /* notify the caller of success on this cpu */ - uci->err = MC_SUCCESS; - } - } else if (uci->err != MC_ALLOCATED || mc_header->rev > uci->mc->hdr.rev) { - pr_debug("microcode: CPU%d found a matching microcode update with " - " revision 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev); - uci->cksum = cksum; - uci->pf = pf; /* keep the original mc pf for cksum calculation */ - uci->err = MC_MARKED; /* found the match */ - for_each_online_cpu(cpu_num) { - if (ucode_cpu_info + cpu_num != uci - && ucode_cpu_info[cpu_num].mc == uci->mc) { - uci->mc = NULL; - break; - } - } - if (uci->mc != NULL) { - vfree(uci->mc); - uci->mc = NULL; - } - } - return; + if (!sigmatch(sig, uci->sig, pf, uci->pf) + || mc_header->rev <= uci->rev) + return 0; + return 1; } -static int find_matching_ucodes (void) +static int microcode_sanity_check(void *mc) { - int cursor = 0; - int error = 0; - - while (cursor + MC_HEADER_SIZE < user_buffer_size) { - microcode_header_t mc_header; - void *newmc = NULL; - int i, sum, cpu_num, allocated_flag, total_size, data_size, ext_table_size; + microcode_header_t *mc_header = mc; + struct extended_sigtable *ext_header = NULL; + struct extended_signature *ext_sig; + unsigned long total_size, data_size, ext_table_size; + int sum, orig_sum, ext_sigcount = 0, i; + + total_size = get_totalsize(mc_header); + data_size = get_datasize(mc_header); + if (data_size + MC_HEADER_SIZE > total_size) { + printk(KERN_ERR "microcode: error! " + "Bad data size in microcode data file\n"); + return -EINVAL; + } - if (copy_from_user(&mc_header, user_buffer + cursor, MC_HEADER_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - error = -EFAULT; - goto out; + if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { + printk(KERN_ERR "microcode: error! " + "Unknown microcode update format\n"); + return -EINVAL; + } + ext_table_size = total_size - (MC_HEADER_SIZE + data_size); + if (ext_table_size) { + if ((ext_table_size < EXT_HEADER_SIZE) + || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { + printk(KERN_ERR "microcode: error! " + "Small exttable size in microcode data file\n"); + return -EINVAL; } - - total_size = get_totalsize(&mc_header); - if ((cursor + total_size > user_buffer_size) || (total_size < DEFAULT_UCODE_TOTALSIZE)) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - error = -EINVAL; - goto out; + ext_header = mc + MC_HEADER_SIZE + data_size; + if (ext_table_size != exttable_size(ext_header)) { + printk(KERN_ERR "microcode: error! " + "Bad exttable size in microcode data file\n"); + return -EFAULT; } + ext_sigcount = ext_header->count; + } - data_size = get_datasize(&mc_header); - if ((data_size + MC_HEADER_SIZE > total_size) || (data_size < DEFAULT_UCODE_DATASIZE)) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - error = -EINVAL; - goto out; + /* check extended table checksum */ + if (ext_table_size) { + int ext_table_sum = 0; + int *ext_tablep = (int *)ext_header; + + i = ext_table_size / DWSIZE; + while (i--) + ext_table_sum += ext_tablep[i]; + if (ext_table_sum) { + printk(KERN_WARNING "microcode: aborting, " + "bad extended signature table checksum\n"); + return -EINVAL; } + } - if (mc_header.ldrver != 1 || mc_header.hdrver != 1) { - printk(KERN_ERR "microcode: error! Unknown microcode update format\n"); - error = -EINVAL; - goto out; + /* calculate the checksum */ + orig_sum = 0; + i = (MC_HEADER_SIZE + data_size) / DWSIZE; + while (i--) + orig_sum += ((int *)mc)[i]; + if (orig_sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + if (!ext_table_size) + return 0; + /* check extended signature checksum */ + for (i = 0; i < ext_sigcount; i++) { + ext_sig = (struct extended_signature *)((void *)ext_header + + EXT_HEADER_SIZE + EXT_SIGNATURE_SIZE * i); + sum = orig_sum + - (mc_header->sig + mc_header->pf + mc_header->cksum) + + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); + if (sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; } + } + return 0; +} - for_each_online_cpu(cpu_num) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - if (sigmatch(mc_header.sig, uci->sig, mc_header.pf, uci->orig_pf)) - mark_microcode_update(cpu_num, &mc_header, mc_header.sig, mc_header.pf, mc_header.cksum); - } +/* + * return 0 - no update found + * return 1 - found update + * return < 0 - error + */ +static int get_maching_microcode(void *mc, int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + microcode_header_t *mc_header = mc; + struct extended_sigtable *ext_header; + unsigned long total_size = get_totalsize(mc_header); + int ext_sigcount, i; + struct extended_signature *ext_sig; + void *new_mc; + + if (microcode_update_match(cpu, mc_header, + mc_header->sig, mc_header->pf)) + goto find; + + if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) + return 0; + + ext_header = (struct extended_sigtable *)(mc + + get_datasize(mc_header) + MC_HEADER_SIZE); + ext_sigcount = ext_header->count; + ext_sig = (struct extended_signature *)((void *)ext_header + + EXT_HEADER_SIZE); + for (i = 0; i < ext_sigcount; i++) { + if (microcode_update_match(cpu, mc_header, + ext_sig->sig, ext_sig->pf)) + goto find; + ext_sig++; + } + return 0; +find: + pr_debug("microcode: CPU %d found a matching microcode update with" + " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev); + new_mc = vmalloc(total_size); + if (!new_mc) { + printk(KERN_ERR "microcode: error! Can not allocate memory\n"); + return -ENOMEM; + } - ext_table_size = total_size - (MC_HEADER_SIZE + data_size); - if (ext_table_size) { - struct extended_sigtable ext_header; - struct extended_signature ext_sig; - int ext_sigcount; + /* free previous update file */ + vfree(uci->mc); - if ((ext_table_size < EXT_HEADER_SIZE) - || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - error = -EINVAL; - goto out; - } - if (copy_from_user(&ext_header, user_buffer + cursor - + MC_HEADER_SIZE + data_size, EXT_HEADER_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - error = -EFAULT; - goto out; - } - if (ext_table_size != exttable_size(&ext_header)) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - error = -EFAULT; - goto out; - } - - ext_sigcount = ext_header.count; - - for (i = 0; i < ext_sigcount; i++) { - if (copy_from_user(&ext_sig, user_buffer + cursor + MC_HEADER_SIZE + data_size + EXT_HEADER_SIZE - + EXT_SIGNATURE_SIZE * i, EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - error = -EFAULT; - goto out; - } - for_each_online_cpu(cpu_num) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - if (sigmatch(ext_sig.sig, uci->sig, ext_sig.pf, uci->orig_pf)) { - mark_microcode_update(cpu_num, &mc_header, ext_sig.sig, ext_sig.pf, ext_sig.cksum); - } - } - } - } - /* now check if any cpu has matched */ - allocated_flag = 0; - sum = 0; - for_each_online_cpu(cpu_num) { - if (ucode_cpu_info[cpu_num].err == MC_MARKED) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - if (!allocated_flag) { - allocated_flag = 1; - newmc = vmalloc(total_size); - if (!newmc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - error = -ENOMEM; - goto out; - } - if (copy_from_user(newmc + MC_HEADER_SIZE, - user_buffer + cursor + MC_HEADER_SIZE, - total_size - MC_HEADER_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - vfree(newmc); - error = -EFAULT; - goto out; - } - memcpy(newmc, &mc_header, MC_HEADER_SIZE); - /* check extended table checksum */ - if (ext_table_size) { - int ext_table_sum = 0; - int * ext_tablep = (((void *) newmc) + MC_HEADER_SIZE + data_size); - i = ext_table_size / DWSIZE; - while (i--) ext_table_sum += ext_tablep[i]; - if (ext_table_sum) { - printk(KERN_WARNING "microcode: aborting, bad extended signature table checksum\n"); - vfree(newmc); - error = -EINVAL; - goto out; - } - } - - /* calculate the checksum */ - i = (MC_HEADER_SIZE + data_size) / DWSIZE; - while (i--) sum += ((int *)newmc)[i]; - sum -= (mc_header.sig + mc_header.pf + mc_header.cksum); - } - ucode_cpu_info[cpu_num].mc = newmc; - ucode_cpu_info[cpu_num].err = MC_ALLOCATED; /* mc updated */ - if (sum + uci->sig + uci->pf + uci->cksum != 0) { - printk(KERN_ERR "microcode: CPU%d aborting, bad checksum\n", cpu_num); - error = -EINVAL; - goto out; - } - } - } - cursor += total_size; /* goto the next update patch */ - } /* end of while */ -out: - return error; + memcpy(new_mc, mc, total_size); + uci->mc = new_mc; + return 1; } -static void do_update_one (void * unused) +static void apply_microcode(int cpu) { unsigned long flags; unsigned int val[2]; - int cpu_num = smp_processor_id(); + int cpu_num = raw_smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - if (uci->mc == NULL) { - if (verbose) { - if (uci->err == MC_SUCCESS) - printk(KERN_INFO "microcode: CPU%d already at revision 0x%x\n", - cpu_num, uci->rev); - else - printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num); - } + /* We should bind the task to the CPU */ + BUG_ON(cpu_num != cpu); + + if (uci->mc == NULL) return; - } /* serialize access to the physical write to MSR 0x79 */ spin_lock_irqsave(µcode_update_lock, flags); @@ -408,68 +335,107 @@ static void do_update_one (void * unused) /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - /* notify the caller of success on this cpu */ - uci->err = MC_SUCCESS; spin_unlock_irqrestore(µcode_update_lock, flags); - printk(KERN_INFO "microcode: CPU%d updated from revision " + if (val[1] != uci->mc->hdr.rev) { + printk(KERN_ERR "microcode: CPU%d updated from revision " + "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]); + return; + } + pr_debug("microcode: CPU%d updated from revision " "0x%x to 0x%x, date = %08x \n", cpu_num, uci->rev, val[1], uci->mc->hdr.date); - return; + uci->rev = val[1]; } -static int do_microcode_update (void) -{ - int i, error; +#ifdef CONFIG_MICROCODE_OLD_INTERFACE +static void __user *user_buffer; /* user area microcode data buffer */ +static unsigned int user_buffer_size; /* it's size */ - if (on_each_cpu(collect_cpu_info, NULL, 1, 1) != 0) { - printk(KERN_ERR "microcode: Error! Could not run on all processors\n"); - error = -EIO; - goto out; +static long get_next_ucode(void **mc, long offset) +{ + microcode_header_t mc_header; + unsigned long total_size; + + /* No more data */ + if (offset >= user_buffer_size) + return 0; + if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) { + printk(KERN_ERR "microcode: error! Can not read user data\n"); + return -EFAULT; } - - if ((error = find_matching_ucodes())) { - printk(KERN_ERR "microcode: Error in the microcode data\n"); - goto out_free; + total_size = get_totalsize(&mc_header); + if (offset + total_size > user_buffer_size) { + printk(KERN_ERR "microcode: error! Bad total size in microcode " + "data file\n"); + return -EINVAL; } - - if (on_each_cpu(do_update_one, NULL, 1, 1) != 0) { - printk(KERN_ERR "microcode: Error! Could not run on all processors\n"); - error = -EIO; + *mc = vmalloc(total_size); + if (!*mc) + return -ENOMEM; + if (copy_from_user(*mc, user_buffer + offset, total_size)) { + printk(KERN_ERR "microcode: error! Can not read user data\n"); + vfree(*mc); + return -EFAULT; } + return offset + total_size; +} + +static int do_microcode_update (void) +{ + long cursor = 0; + int error = 0; + void *new_mc; + int cpu; + cpumask_t old; + + old = current->cpus_allowed; -out_free: - for_each_online_cpu(i) { - if (ucode_cpu_info[i].mc) { - int j; - void *tmp = ucode_cpu_info[i].mc; - vfree(tmp); - for_each_online_cpu(j) { - if (ucode_cpu_info[j].mc == tmp) - ucode_cpu_info[j].mc = NULL; - } + while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) { + error = microcode_sanity_check(new_mc); + if (error) + goto out; + /* + * It's possible the data file has multiple matching ucode, + * lets keep searching till the latest version + */ + for_each_online_cpu(cpu) { + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!uci->valid) + continue; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + error = get_maching_microcode(new_mc, cpu); + if (error < 0) + goto out; + if (error == 1) + apply_microcode(cpu); } - if (ucode_cpu_info[i].err == MC_IGNORED && verbose) - printk(KERN_WARNING "microcode: CPU%d not 'upgrading' to earlier revision" - " 0x%x (current=0x%x)\n", i, ucode_cpu_info[i].cksum, ucode_cpu_info[i].rev); + vfree(new_mc); } out: + if (cursor > 0) + vfree(new_mc); + if (cursor < 0) + error = cursor; + set_cpus_allowed(current, old); return error; } +static int microcode_open (struct inode *unused1, struct file *unused2) +{ + return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; +} + static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos) { ssize_t ret; - if (len < DEFAULT_UCODE_TOTALSIZE) { - printk(KERN_ERR "microcode: not enough data\n"); - return -EINVAL; - } - if ((len >> PAGE_SHIFT) > num_physpages) { printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages); return -EINVAL; } + lock_cpu_hotplug(); mutex_lock(µcode_mutex); user_buffer = (void __user *) buf; @@ -480,6 +446,7 @@ static ssize_t microcode_write (struct file *file, const char __user *buf, size_ ret = (ssize_t)len; mutex_unlock(µcode_mutex); + unlock_cpu_hotplug(); return ret; } @@ -496,7 +463,7 @@ static struct miscdevice microcode_dev = { .fops = µcode_fops, }; -static int __init microcode_init (void) +static int __init microcode_dev_init (void) { int error; @@ -508,6 +475,280 @@ static int __init microcode_init (void) return error; } + return 0; +} + +static void __exit microcode_dev_exit (void) +{ + misc_deregister(µcode_dev); +} + +MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); +#else +#define microcode_dev_init() 0 +#define microcode_dev_exit() do { } while(0) +#endif + +static long get_next_ucode_from_buffer(void **mc, void *buf, + unsigned long size, long offset) +{ + microcode_header_t *mc_header; + unsigned long total_size; + + /* No more data */ + if (offset >= size) + return 0; + mc_header = (microcode_header_t *)(buf + offset); + total_size = get_totalsize(mc_header); + + if (offset + total_size > size) { + printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); + return -EINVAL; + } + + *mc = vmalloc(total_size); + if (!*mc) { + printk(KERN_ERR "microcode: error! Can not allocate memory\n"); + return -ENOMEM; + } + memcpy(*mc, buf + offset, total_size); + return offset + total_size; +} + +/* fake device for request_firmware */ +static struct platform_device *microcode_pdev; + +static int cpu_request_microcode(int cpu) +{ + char name[30]; + struct cpuinfo_x86 *c = cpu_data + cpu; + const struct firmware *firmware; + void *buf; + unsigned long size; + long offset = 0; + int error; + void *mc; + + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + sprintf(name,"intel-ucode/%02x-%02x-%02x", + c->x86, c->x86_model, c->x86_mask); + error = request_firmware(&firmware, name, µcode_pdev->dev); + if (error) { + pr_debug("ucode data file %s load failed\n", name); + return error; + } + buf = (void *)firmware->data; + size = firmware->size; + while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset)) + > 0) { + error = microcode_sanity_check(mc); + if (error) + break; + error = get_maching_microcode(mc, cpu); + if (error < 0) + break; + /* + * It's possible the data file has multiple matching ucode, + * lets keep searching till the latest version + */ + if (error == 1) { + apply_microcode(cpu); + error = 0; + } + vfree(mc); + } + if (offset > 0) + vfree(mc); + if (offset < 0) + error = offset; + release_firmware(firmware); + + return error; +} + +static void microcode_init_cpu(int cpu) +{ + cpumask_t old; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + old = current->cpus_allowed; + + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + mutex_lock(µcode_mutex); + collect_cpu_info(cpu); + if (uci->valid) + cpu_request_microcode(cpu); + mutex_unlock(µcode_mutex); + set_cpus_allowed(current, old); +} + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + mutex_lock(µcode_mutex); + uci->valid = 0; + vfree(uci->mc); + uci->mc = NULL; + mutex_unlock(µcode_mutex); +} + +static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + char *end; + unsigned long val = simple_strtoul(buf, &end, 0); + int err = 0; + int cpu = dev->id; + + if (end == buf) + return -EINVAL; + if (val == 1) { + cpumask_t old; + + old = current->cpus_allowed; + + lock_cpu_hotplug(); + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + mutex_lock(µcode_mutex); + if (uci->valid) + err = cpu_request_microcode(cpu); + mutex_unlock(µcode_mutex); + unlock_cpu_hotplug(); + set_cpus_allowed(current, old); + } + if (err) + return err; + return sz; +} + +static ssize_t version_show(struct sys_device *dev, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->rev); +} + +static ssize_t pf_show(struct sys_device *dev, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->pf); +} + +static SYSDEV_ATTR(reload, 0200, NULL, reload_store); +static SYSDEV_ATTR(version, 0400, version_show, NULL); +static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); + +static struct attribute *mc_default_attrs[] = { + &attr_reload.attr, + &attr_version.attr, + &attr_processor_flags.attr, + NULL +}; + +static struct attribute_group mc_attr_group = { + .attrs = mc_default_attrs, + .name = "microcode", +}; + +static int mc_sysdev_add(struct sys_device *sys_dev) +{ + int cpu = sys_dev->id; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!cpu_online(cpu)) + return 0; + pr_debug("Microcode:CPU %d added\n", cpu); + memset(uci, 0, sizeof(*uci)); + sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + + microcode_init_cpu(cpu); + return 0; +} + +static int mc_sysdev_remove(struct sys_device *sys_dev) +{ + int cpu = sys_dev->id; + + if (!cpu_online(cpu)) + return 0; + pr_debug("Microcode:CPU %d removed\n", cpu); + microcode_fini_cpu(cpu); + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + return 0; +} + +static int mc_sysdev_resume(struct sys_device *dev) +{ + int cpu = dev->id; + + if (!cpu_online(cpu)) + return 0; + pr_debug("Microcode:CPU %d resumed\n", cpu); + /* only CPU 0 will apply ucode here */ + apply_microcode(0); + return 0; +} + +static struct sysdev_driver mc_sysdev_driver = { + .add = mc_sysdev_add, + .remove = mc_sysdev_remove, + .resume = mc_sysdev_resume, +}; + +#ifdef CONFIG_HOTPLUG_CPU +static __cpuinit int +mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + mc_sysdev_add(sys_dev); + break; + case CPU_DOWN_PREPARE: + mc_sysdev_remove(sys_dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block mc_cpu_notifier = { + .notifier_call = mc_cpu_callback, +}; +#endif + +static int __init microcode_init (void) +{ + int error; + + error = microcode_dev_init(); + if (error) + return error; + microcode_pdev = platform_device_register_simple("microcode", -1, + NULL, 0); + if (IS_ERR(microcode_pdev)) { + microcode_dev_exit(); + return PTR_ERR(microcode_pdev); + } + + lock_cpu_hotplug(); + error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + unlock_cpu_hotplug(); + if (error) { + microcode_dev_exit(); + platform_device_unregister(microcode_pdev); + return error; + } + + register_hotcpu_notifier(&mc_cpu_notifier); + printk(KERN_INFO "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@veritas.com>\n"); return 0; @@ -515,9 +756,16 @@ static int __init microcode_init (void) static void __exit microcode_exit (void) { - misc_deregister(µcode_dev); + microcode_dev_exit(); + + unregister_hotcpu_notifier(&mc_cpu_notifier); + + lock_cpu_hotplug(); + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + unlock_cpu_hotplug(); + + platform_device_unregister(microcode_pdev); } module_init(microcode_init) module_exit(microcode_exit) -MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index a70b5fa0ef0..442aaf8c77e 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -30,6 +30,7 @@ #include <asm/io_apic.h> #include <mach_apic.h> +#include <mach_apicdef.h> #include <mach_mpparse.h> #include <bios_ebda.h> @@ -68,7 +69,7 @@ unsigned int def_to_bigsmp = 0; /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; /* Internal processor count */ -static unsigned int __devinitdata num_processors; +unsigned int __cpuinitdata num_processors; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map; @@ -228,12 +229,14 @@ static void __init MP_bus_info (struct mpc_config_bus *m) mpc_oem_bus_info(m, str, translation_table[mpc_record]); +#if MAX_MP_BUSSES < 256 if (m->mpc_busid >= MAX_MP_BUSSES) { printk(KERN_WARNING "MP table busid value (%d) for bustype %s " " is too large, max. supported is %d\n", m->mpc_busid, str, MAX_MP_BUSSES - 1); return; } +#endif if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) { mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; @@ -293,19 +296,6 @@ static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); - /* - * Well it seems all SMP boards in existence - * use ExtINT/LVT1 == LINT0 and - * NMI/LVT2 == LINT1 - the following check - * will show us if this assumptions is false. - * Until then we do not have to add baggage. - */ - if ((m->mpc_irqtype == mp_ExtINT) && - (m->mpc_destapiclint != 0)) - BUG(); - if ((m->mpc_irqtype == mp_NMI) && - (m->mpc_destapiclint != 1)) - BUG(); } #ifdef CONFIG_X86_NUMAQ @@ -822,8 +812,7 @@ int es7000_plat; #ifdef CONFIG_ACPI -void __init mp_register_lapic_address ( - u64 address) +void __init mp_register_lapic_address(u64 address) { mp_lapic_addr = (unsigned long) address; @@ -835,13 +824,10 @@ void __init mp_register_lapic_address ( Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid); } - -void __devinit mp_register_lapic ( - u8 id, - u8 enabled) +void __devinit mp_register_lapic (u8 id, u8 enabled) { struct mpc_config_processor processor; - int boot_cpu = 0; + int boot_cpu = 0; if (MAX_APICS - id <= 0) { printk(KERN_WARNING "Processor #%d invalid (max %d)\n", @@ -878,11 +864,9 @@ static struct mp_ioapic_routing { u32 pin_programmed[4]; } mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic ( - int gsi) +static int mp_find_ioapic (int gsi) { - int i = 0; + int i = 0; /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { @@ -895,15 +879,11 @@ static int mp_find_ioapic ( return -1; } - -void __init mp_register_ioapic ( - u8 id, - u32 address, - u32 gsi_base) +void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) { - int idx = 0; - int tmpid; + int idx = 0; + int tmpid; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -949,16 +929,10 @@ void __init mp_register_ioapic ( mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - return; } - -void __init mp_override_legacy_irq ( - u8 bus_irq, - u8 polarity, - u8 trigger, - u32 gsi) +void __init +mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { struct mpc_config_intsrc intsrc; int ioapic = -1; @@ -996,15 +970,13 @@ void __init mp_override_legacy_irq ( mp_irqs[mp_irq_entries] = intsrc; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!\n"); - - return; } void __init mp_config_acpi_legacy_irqs (void) { struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; + int i = 0; + int ioapic = -1; /* * Fabricate the legacy ISA bus (bus #31). @@ -1073,12 +1045,12 @@ void __init mp_config_acpi_legacy_irqs (void) #define MAX_GSI_NUM 4096 -int mp_register_gsi (u32 gsi, int triggering, int polarity) +int mp_register_gsi(u32 gsi, int triggering, int polarity) { - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - static int pci_irq = 16; + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; + static int pci_irq = 16; /* * Mapping between Global System Interrups, which * represent all possible interrupts, and IRQs diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index acb351478e4..dbda706fdd1 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -21,83 +21,174 @@ #include <linux/sysdev.h> #include <linux/sysctl.h> #include <linux/percpu.h> +#include <linux/dmi.h> +#include <linux/kprobes.h> #include <asm/smp.h> #include <asm/nmi.h> +#include <asm/kdebug.h> #include <asm/intel_arch_perfmon.h> #include "mach_traps.h" -unsigned int nmi_watchdog = NMI_NONE; -extern int unknown_nmi_panic; -static unsigned int nmi_hz = HZ; -static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ -static unsigned int nmi_p4_cccr_val; -extern void show_registers(struct pt_regs *regs); +/* perfctr_nmi_owner tracks the ownership of the perfctr registers: + * evtsel_nmi_owner tracks the ownership of the event selection + * - different performance counters/ event selection may be reserved for + * different subsystems this reservation system just tries to coordinate + * things a little + */ +static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner); +static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[3]); -/* - * lapic_nmi_owner tracks the ownership of the lapic NMI hardware: - * - it may be reserved by some other driver, or not - * - when not reserved by some other driver, it may be used for - * the NMI watchdog, or not - * - * This is maintained separately from nmi_active because the NMI - * watchdog may also be driven from the I/O APIC timer. +/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's + * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) */ -static DEFINE_SPINLOCK(lapic_nmi_owner_lock); -static unsigned int lapic_nmi_owner; -#define LAPIC_NMI_WATCHDOG (1<<0) -#define LAPIC_NMI_RESERVED (1<<1) +#define NMI_MAX_COUNTER_BITS 66 /* nmi_active: - * +1: the lapic NMI watchdog is active, but can be disabled - * 0: the lapic NMI watchdog has not been set up, and cannot + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot * be enabled - * -1: the lapic NMI watchdog is disabled, but can be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled */ -int nmi_active; +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -#define K7_EVNTSEL_ENABLE (1 << 22) -#define K7_EVNTSEL_INT (1 << 20) -#define K7_EVNTSEL_OS (1 << 17) -#define K7_EVNTSEL_USR (1 << 16) -#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 -#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING +unsigned int nmi_watchdog = NMI_DEFAULT; +static unsigned int nmi_hz = HZ; -#define P6_EVNTSEL0_ENABLE (1 << 22) -#define P6_EVNTSEL_INT (1 << 20) -#define P6_EVNTSEL_OS (1 << 17) -#define P6_EVNTSEL_USR (1 << 16) -#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 -#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED +struct nmi_watchdog_ctlblk { + int enabled; + u64 check_bit; + unsigned int cccr_msr; + unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ + unsigned int evntsel_msr; /* the MSR to select the events to handle */ +}; +static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); -#define MSR_P4_MISC_ENABLE 0x1A0 -#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) -#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12) -#define MSR_P4_PERFCTR0 0x300 -#define MSR_P4_CCCR0 0x360 -#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) -#define P4_ESCR_OS (1<<3) -#define P4_ESCR_USR (1<<2) -#define P4_CCCR_OVF_PMI0 (1<<26) -#define P4_CCCR_OVF_PMI1 (1<<27) -#define P4_CCCR_THRESHOLD(N) ((N)<<20) -#define P4_CCCR_COMPLEMENT (1<<19) -#define P4_CCCR_COMPARE (1<<18) -#define P4_CCCR_REQUIRED (3<<16) -#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) -#define P4_CCCR_ENABLE (1<<12) -/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter - CRU_ESCR0 (with any non-null event selector) through a complemented - max threshold. [IA32-Vol3, Section 14.9.9] */ -#define MSR_P4_IQ_COUNTER0 0x30C -#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR) -#define P4_NMI_IQ_CCCR0 \ - (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ - P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) +/* local prototypes */ +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); -#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL -#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK +extern void show_registers(struct pt_regs *regs); +extern int unknown_nmi_panic; + +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the performance counter register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_PERFCTR0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_PERFCTR0); + + switch (boot_cpu_data.x86) { + case 6: + return (msr - MSR_P6_PERFCTR0); + case 15: + return (msr - MSR_P4_BPU_PERFCTR0); + } + } + return 0; +} + +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the event selection register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_EVNTSEL0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_EVENTSEL0); + + switch (boot_cpu_data.x86) { + case 6: + return (msr - MSR_P6_EVNTSEL0); + case 15: + return (msr - MSR_P4_BSU_ESCR0); + } + } + return 0; +} + +/* checks for a bit availability (hack for oprofile) */ +int avail_to_resrv_perfctr_nmi_bit(unsigned int counter) +{ + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); +} + +/* checks the an msr for availability */ +int avail_to_resrv_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); +} + +int reserve_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner))) + return 1; + return 0; +} + +void release_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner)); +} + +int reserve_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0])) + return 1; + return 0; +} + +void release_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]); +} + +static __cpuinit inline int nmi_known_cpu(void) +{ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return 1; + else + return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); + } + return 0; +} #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when @@ -125,7 +216,18 @@ static int __init check_nmi_watchdog(void) unsigned int *prev_nmi_count; int cpu; - if (nmi_watchdog == NMI_NONE) + /* Enable NMI watchdog for newer systems. + Actually it should be safe for most systems before 2004 too except + for some IBM systems that corrupt registers when NMI happens + during SMM. Unfortunately we don't have more exact information + on these and use this coarse check. */ + if (nmi_watchdog == NMI_DEFAULT && dmi_get_year(DMI_BIOS_DATE) >= 2004) + nmi_watchdog = NMI_LOCAL_APIC; + + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) + return 0; + + if (!atomic_read(&nmi_active)) return 0; prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); @@ -149,25 +251,45 @@ static int __init check_nmi_watchdog(void) if (!cpu_isset(cpu, cpu_callin_map)) continue; #endif + if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled) + continue; if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - endflag = 1; printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], nmi_count(cpu)); - nmi_active = 0; - lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; - kfree(prev_nmi_count); - return -1; + per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0; + atomic_dec(&nmi_active); } } + if (!atomic_read(&nmi_active)) { + kfree(prev_nmi_count); + atomic_set(&nmi_active, -1); + return -1; + } endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) + if (nmi_watchdog == NMI_LOCAL_APIC) { + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + nmi_hz = 1; + /* + * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && + ((u64)cpu_khz * 1000) > 0x7fffffffULL) { + u64 count = (u64)cpu_khz * 1000; + do_div(count, 0x7fffffffUL); + nmi_hz = count + 1; + } + } kfree(prev_nmi_count); return 0; @@ -181,124 +303,70 @@ static int __init setup_nmi_watchdog(char *str) get_option(&str, &nmi); - if (nmi >= NMI_INVALID) + if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) return 0; - if (nmi == NMI_NONE) - nmi_watchdog = nmi; /* * If any other x86 CPU has a local APIC, then * please test the NMI stuff there and send me the * missing bits. Right now Intel P6/P4 and AMD K7 only. */ - if ((nmi == NMI_LOCAL_APIC) && - (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15)) - nmi_watchdog = nmi; - if ((nmi == NMI_LOCAL_APIC) && - (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && - (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15)) - nmi_watchdog = nmi; - /* - * We can enable the IO-APIC watchdog - * unconditionally. - */ - if (nmi == NMI_IO_APIC) { - nmi_active = 1; - nmi_watchdog = nmi; - } + if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0)) + return 0; /* no lapic support */ + nmi_watchdog = nmi; return 1; } __setup("nmi_watchdog=", setup_nmi_watchdog); -static void disable_intel_arch_watchdog(void); - static void disable_lapic_nmi_watchdog(void) { - if (nmi_active <= 0) + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); + + if (atomic_read(&nmi_active) <= 0) return; - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - wrmsr(MSR_K7_EVNTSEL0, 0, 0); - break; - case X86_VENDOR_INTEL: - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - disable_intel_arch_watchdog(); - break; - } - switch (boot_cpu_data.x86) { - case 6: - if (boot_cpu_data.x86_model > 0xd) - break; - wrmsr(MSR_P6_EVNTSEL0, 0, 0); - break; - case 15: - if (boot_cpu_data.x86_model > 0x4) - break; + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); - wrmsr(MSR_P4_IQ_CCCR0, 0, 0); - wrmsr(MSR_P4_CRU_ESCR0, 0, 0); - break; - } - break; - } - nmi_active = -1; - /* tell do_nmi() and others that we're not active any more */ - nmi_watchdog = 0; + BUG_ON(atomic_read(&nmi_active) != 0); } static void enable_lapic_nmi_watchdog(void) { - if (nmi_active < 0) { - nmi_watchdog = NMI_LOCAL_APIC; - setup_apic_nmi_watchdog(); - } -} + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); -int reserve_lapic_nmi(void) -{ - unsigned int old_owner; - - spin_lock(&lapic_nmi_owner_lock); - old_owner = lapic_nmi_owner; - lapic_nmi_owner |= LAPIC_NMI_RESERVED; - spin_unlock(&lapic_nmi_owner_lock); - if (old_owner & LAPIC_NMI_RESERVED) - return -EBUSY; - if (old_owner & LAPIC_NMI_WATCHDOG) - disable_lapic_nmi_watchdog(); - return 0; -} + /* are we already enabled */ + if (atomic_read(&nmi_active) != 0) + return; -void release_lapic_nmi(void) -{ - unsigned int new_owner; + /* are we lapic aware */ + if (nmi_known_cpu() <= 0) + return; - spin_lock(&lapic_nmi_owner_lock); - new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED; - lapic_nmi_owner = new_owner; - spin_unlock(&lapic_nmi_owner_lock); - if (new_owner & LAPIC_NMI_WATCHDOG) - enable_lapic_nmi_watchdog(); + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); + touch_nmi_watchdog(); } void disable_timer_nmi_watchdog(void) { - if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0)) + BUG_ON(nmi_watchdog != NMI_IO_APIC); + + if (atomic_read(&nmi_active) <= 0) return; - unset_nmi_callback(); - nmi_active = -1; - nmi_watchdog = NMI_NONE; + disable_irq(0); + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); + + BUG_ON(atomic_read(&nmi_active) != 0); } void enable_timer_nmi_watchdog(void) { - if (nmi_active < 0) { - nmi_watchdog = NMI_IO_APIC; + BUG_ON(nmi_watchdog != NMI_IO_APIC); + + if (atomic_read(&nmi_active) == 0) { touch_nmi_watchdog(); - nmi_active = 1; + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); + enable_irq(0); } } @@ -308,15 +376,20 @@ static int nmi_pm_active; /* nmi_active before suspend */ static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) { - nmi_pm_active = nmi_active; - disable_lapic_nmi_watchdog(); + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); return 0; } static int lapic_nmi_resume(struct sys_device *dev) { - if (nmi_pm_active > 0) - enable_lapic_nmi_watchdog(); + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } return 0; } @@ -336,7 +409,13 @@ static int __init init_lapic_nmi_sysfs(void) { int error; - if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC) + /* should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if ( atomic_read(&nmi_active) < 0 ) return 0; error = sysdev_class_register(&nmi_sysclass); @@ -354,138 +433,269 @@ late_initcall(init_lapic_nmi_sysfs); * Original code written by Keith Owens. */ -static void clear_msr_range(unsigned int base, unsigned int n) -{ - unsigned int i; - - for(i = 0; i < n; ++i) - wrmsr(base+i, 0, 0); -} - -static void write_watchdog_counter(const char *descr) +static void write_watchdog_counter(unsigned int perfctr_msr, const char *descr) { u64 count = (u64)cpu_khz * 1000; do_div(count, nmi_hz); if(descr) Dprintk("setting %s to -0x%08Lx\n", descr, count); - wrmsrl(nmi_perfctr_msr, 0 - count); + wrmsrl(perfctr_msr, 0 - count); } -static void setup_k7_watchdog(void) +/* Note that these events don't tick when the CPU idles. This means + the frequency varies with CPU load. */ + +#define K7_EVNTSEL_ENABLE (1 << 22) +#define K7_EVNTSEL_INT (1 << 20) +#define K7_EVNTSEL_OS (1 << 17) +#define K7_EVNTSEL_USR (1 << 16) +#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 +#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING + +static int setup_k7_watchdog(void) { + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + perfctr_msr = MSR_K7_PERFCTR0; + evntsel_msr = MSR_K7_EVNTSEL0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - nmi_perfctr_msr = MSR_K7_PERFCTR0; + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; - clear_msr_range(MSR_K7_EVNTSEL0, 4); - clear_msr_range(MSR_K7_PERFCTR0, 4); + wrmsrl(perfctr_msr, 0UL); evntsel = K7_EVNTSEL_INT | K7_EVNTSEL_OS | K7_EVNTSEL_USR | K7_NMI_EVENT; - wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - write_watchdog_counter("K7_PERFCTR0"); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + write_watchdog_counter(perfctr_msr, "K7_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; - wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL<<63; + return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; +} + +static void stop_k7_watchdog(void) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } -static void setup_p6_watchdog(void) +#define P6_EVNTSEL0_ENABLE (1 << 22) +#define P6_EVNTSEL_INT (1 << 20) +#define P6_EVNTSEL_OS (1 << 17) +#define P6_EVNTSEL_USR (1 << 16) +#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 +#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED + +static int setup_p6_watchdog(void) { + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + perfctr_msr = MSR_P6_PERFCTR0; + evntsel_msr = MSR_P6_EVNTSEL0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - nmi_perfctr_msr = MSR_P6_PERFCTR0; + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; - clear_msr_range(MSR_P6_EVNTSEL0, 2); - clear_msr_range(MSR_P6_PERFCTR0, 2); + wrmsrl(perfctr_msr, 0UL); evntsel = P6_EVNTSEL_INT | P6_EVNTSEL_OS | P6_EVNTSEL_USR | P6_NMI_EVENT; - wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); - write_watchdog_counter("P6_PERFCTR0"); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + write_watchdog_counter(perfctr_msr, "P6_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; - wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL<<39; + return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; +} + +static void stop_p6_watchdog(void) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } +/* Note that these events don't tick when the CPU idles. This means + the frequency varies with CPU load. */ + +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) +#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) +#define P4_ESCR_OS (1<<3) +#define P4_ESCR_USR (1<<2) +#define P4_CCCR_OVF_PMI0 (1<<26) +#define P4_CCCR_OVF_PMI1 (1<<27) +#define P4_CCCR_THRESHOLD(N) ((N)<<20) +#define P4_CCCR_COMPLEMENT (1<<19) +#define P4_CCCR_COMPARE (1<<18) +#define P4_CCCR_REQUIRED (3<<16) +#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) +#define P4_CCCR_ENABLE (1<<12) +#define P4_CCCR_OVF (1<<31) +/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + CRU_ESCR0 (with any non-null event selector) through a complemented + max threshold. [IA32-Vol3, Section 14.9.9] */ + static int setup_p4_watchdog(void) { + unsigned int perfctr_msr, evntsel_msr, cccr_msr; + unsigned int evntsel, cccr_val; unsigned int misc_enable, dummy; + unsigned int ht_num; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy); + rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) return 0; - nmi_perfctr_msr = MSR_P4_IQ_COUNTER0; - nmi_p4_cccr_val = P4_NMI_IQ_CCCR0; #ifdef CONFIG_SMP - if (smp_num_siblings == 2) - nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1; + /* detect which hyperthread we are on */ + if (smp_num_siblings == 2) { + unsigned int ebx, apicid; + + ebx = cpuid_ebx(1); + apicid = (ebx >> 24) & 0xff; + ht_num = apicid & 1; + } else #endif + ht_num = 0; - if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL)) - clear_msr_range(0x3F1, 2); - /* MSR 0x3F0 seems to have a default value of 0xFC00, but current - docs doesn't fully define it, so leave it alone for now. */ - if (boot_cpu_data.x86_model >= 0x3) { - /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */ - clear_msr_range(0x3A0, 26); - clear_msr_range(0x3BC, 3); + /* performance counters are shared resources + * assign each hyperthread its own set + * (re-use the ESCR0 register, seems safe + * and keeps the cccr_val the same) + */ + if (!ht_num) { + /* logical cpu 0 */ + perfctr_msr = MSR_P4_IQ_PERFCTR0; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR0; + cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); } else { - clear_msr_range(0x3A0, 31); + /* logical cpu 1 */ + perfctr_msr = MSR_P4_IQ_PERFCTR1; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR1; + cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); } - clear_msr_range(0x3C0, 6); - clear_msr_range(0x3C8, 6); - clear_msr_range(0x3E0, 2); - clear_msr_range(MSR_P4_CCCR0, 18); - clear_msr_range(MSR_P4_PERFCTR0, 18); - - wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); - wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); - write_watchdog_counter("P4_IQ_COUNTER0"); + + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; + + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + evntsel = P4_ESCR_EVENT_SELECT(0x3F) + | P4_ESCR_OS + | P4_ESCR_USR; + + cccr_val |= P4_CCCR_THRESHOLD(15) + | P4_CCCR_COMPLEMENT + | P4_CCCR_COMPARE + | P4_CCCR_REQUIRED; + + wrmsr(evntsel_msr, evntsel, 0); + wrmsr(cccr_msr, cccr_val, 0); + write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0"); apic_write(APIC_LVTPC, APIC_DM_NMI); - wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = cccr_msr; + wd->check_bit = 1ULL<<39; return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; } -static void disable_intel_arch_watchdog(void) +static void stop_p4_watchdog(void) { - unsigned ebx; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - /* - * Check whether the Architectural PerfMon supports - * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebp indicates event present. - */ - ebx = cpuid_ebx(10); - if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0); + wrmsr(wd->cccr_msr, 0, 0); + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } +#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL +#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK + static int setup_intel_arch_watchdog(void) { + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; - unsigned ebx; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); /* * Check whether the Architectural PerfMon supports * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebp indicates event present. + * NOTE: Corresponding bit = 0 in ebx indicates event present. */ - ebx = cpuid_ebx(10); - if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - return 0; + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + goto fail; + + perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0; - nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2); - clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2); + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + wrmsrl(perfctr_msr, 0UL); evntsel = ARCH_PERFMON_EVENTSEL_INT | ARCH_PERFMON_EVENTSEL_OS @@ -493,51 +703,145 @@ static int setup_intel_arch_watchdog(void) | ARCH_PERFMON_NMI_EVENT_SEL | ARCH_PERFMON_NMI_EVENT_UMASK; - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); - write_watchdog_counter("INTEL_ARCH_PERFCTR0"); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + write_watchdog_counter(perfctr_msr, "INTEL_ARCH_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL << (eax.split.bit_width - 1); return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; } -void setup_apic_nmi_watchdog (void) +static void stop_intel_arch_watchdog(void) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) - return; - setup_k7_watchdog(); - break; - case X86_VENDOR_INTEL: - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - if (!setup_intel_arch_watchdog()) + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + /* + * Check whether the Architectural PerfMon supports + * Unhalted Core Cycles Event or not. + * NOTE: Corresponding bit = 0 in ebx indicates event present. + */ + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + return; + + wrmsr(wd->evntsel_msr, 0, 0); + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); +} + +void setup_apic_nmi_watchdog (void *unused) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; + + if (wd->enabled == 1) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + return; + + if (nmi_watchdog == NMI_LOCAL_APIC) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) return; - break; - } - switch (boot_cpu_data.x86) { - case 6: - if (boot_cpu_data.x86_model > 0xd) + if (!setup_k7_watchdog()) return; - - setup_p6_watchdog(); break; - case 15: - if (boot_cpu_data.x86_model > 0x4) - return; + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + if (!setup_intel_arch_watchdog()) + return; + break; + } + switch (boot_cpu_data.x86) { + case 6: + if (boot_cpu_data.x86_model > 0xd) + return; + + if (!setup_p6_watchdog()) + return; + break; + case 15: + if (boot_cpu_data.x86_model > 0x4) + return; - if (!setup_p4_watchdog()) + if (!setup_p4_watchdog()) + return; + break; + default: return; + } break; default: return; } - break; - default: + } + wd->enabled = 1; + atomic_inc(&nmi_active); +} + +void stop_apic_nmi_watchdog(void *unused) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; + + if (wd->enabled == 0) return; + + if (nmi_watchdog == NMI_LOCAL_APIC) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + stop_k7_watchdog(); + break; + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + stop_intel_arch_watchdog(); + break; + } + switch (boot_cpu_data.x86) { + case 6: + if (boot_cpu_data.x86_model > 0xd) + break; + stop_p6_watchdog(); + break; + case 15: + if (boot_cpu_data.x86_model > 0x4) + break; + stop_p4_watchdog(); + break; + } + break; + default: + return; + } } - lapic_nmi_owner = LAPIC_NMI_WATCHDOG; - nmi_active = 1; + wd->enabled = 0; + atomic_dec(&nmi_active); } /* @@ -579,7 +883,7 @@ EXPORT_SYMBOL(touch_nmi_watchdog); extern void die_nmi(struct pt_regs *, const char *msg); -void nmi_watchdog_tick (struct pt_regs * regs) +__kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) { /* @@ -588,11 +892,23 @@ void nmi_watchdog_tick (struct pt_regs * regs) * smp_processor_id(). */ unsigned int sum; + int touched = 0; int cpu = smp_processor_id(); + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + u64 dummy; + int rc=0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } sum = per_cpu(irq_stat, cpu).apic_timer_irqs; - if (last_irq_sums[cpu] == sum) { + /* if the apic timer isn't firing, this cpu isn't doing much */ + if (!touched && last_irq_sums[cpu] == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... @@ -607,27 +923,59 @@ void nmi_watchdog_tick (struct pt_regs * regs) last_irq_sums[cpu] = sum; alert_counter[cpu] = 0; } - if (nmi_perfctr_msr) { - if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) { - /* - * P4 quirks: - * - An overflown perfctr will assert its interrupt - * until the OVF flag in its CCCR is cleared. - * - LVTPC is masked on interrupt and must be - * unmasked by the LVTPC handler. + /* see if the nmi watchdog went off */ + if (wd->enabled) { + if (nmi_watchdog == NMI_LOCAL_APIC) { + rdmsrl(wd->perfctr_msr, dummy); + if (dummy & wd->check_bit){ + /* this wasn't a watchdog timer interrupt */ + goto done; + } + + /* only Intel P4 uses the cccr msr */ + if (wd->cccr_msr != 0) { + /* + * P4 quirks: + * - An overflown perfctr will assert its interrupt + * until the OVF flag in its CCCR is cleared. + * - LVTPC is masked on interrupt and must be + * unmasked by the LVTPC handler. + */ + rdmsrl(wd->cccr_msr, dummy); + dummy &= ~P4_CCCR_OVF; + wrmsrl(wd->cccr_msr, dummy); + apic_write(APIC_LVTPC, APIC_DM_NMI); + } + else if (wd->perfctr_msr == MSR_P6_PERFCTR0 || + wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { + /* P6 based Pentium M need to re-unmask + * the apic vector but it doesn't hurt + * other P6 variant. + * ArchPerfom/Core Duo also needs this */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + } + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); + rc = 1; + } else if (nmi_watchdog == NMI_IO_APIC) { + /* don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. */ - wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); - apic_write(APIC_LVTPC, APIC_DM_NMI); + rc = 1; } - else if (nmi_perfctr_msr == MSR_P6_PERFCTR0 || - nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { - /* Only P6 based Pentium M need to re-unmask - * the apic vector but it doesn't hurt - * other P6 variant */ - apic_write(APIC_LVTPC, APIC_DM_NMI); - } - write_watchdog_counter(NULL); } +done: + return rc; +} + +int do_nmi_callback(struct pt_regs * regs, int cpu) +{ +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; } #ifdef CONFIG_SYSCTL @@ -637,36 +985,46 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) unsigned char reason = get_nmi_reason(); char buf[64]; - if (!(reason & 0xc0)) { - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(regs, buf); - } + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(regs, buf); return 0; } /* - * proc handler for /proc/sys/kernel/unknown_nmi_panic + * proc handler for /proc/sys/kernel/nmi */ -int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file, +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, loff_t *ppos) { int old_state; - old_state = unknown_nmi_panic; + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!unknown_nmi_panic) + if (!!old_state == !!nmi_watchdog_enabled) return 0; - if (unknown_nmi_panic) { - if (reserve_lapic_nmi() < 0) { - unknown_nmi_panic = 0; - return -EBUSY; - } else { - set_nmi_callback(unknown_nmi_panic_callback); - } + if (atomic_read(&nmi_active) < 0) { + printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + if (nmi_watchdog == NMI_DEFAULT) { + if (nmi_known_cpu() > 0) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; + } + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); } else { - release_lapic_nmi(); - unset_nmi_callback(); + printk( KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; } return 0; } @@ -675,7 +1033,11 @@ int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file, EXPORT_SYMBOL(nmi_active); EXPORT_SYMBOL(nmi_watchdog); -EXPORT_SYMBOL(reserve_lapic_nmi); -EXPORT_SYMBOL(release_lapic_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); +EXPORT_SYMBOL(reserve_perfctr_nmi); +EXPORT_SYMBOL(release_perfctr_nmi); +EXPORT_SYMBOL(reserve_evntsel_nmi); +EXPORT_SYMBOL(release_evntsel_nmi); EXPORT_SYMBOL(disable_timer_nmi_watchdog); EXPORT_SYMBOL(enable_timer_nmi_watchdog); diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 8657c739656..8c190ca7ae4 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -37,6 +37,7 @@ #include <linux/kallsyms.h> #include <linux/ptrace.h> #include <linux/random.h> +#include <linux/personality.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -320,15 +321,6 @@ void show_regs(struct pt_regs * regs) * the "args". */ extern void kernel_thread_helper(void); -__asm__(".section .text\n" - ".align 4\n" - "kernel_thread_helper:\n\t" - "movl %edx,%eax\n\t" - "pushl %edx\n\t" - "call *%ebx\n\t" - "pushl %eax\n\t" - "call do_exit\n" - ".previous"); /* * Create a kernel thread @@ -346,7 +338,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.xes = __USER_DS; regs.orig_eax = -1; regs.eip = (unsigned long) kernel_thread_helper; - regs.xcs = __KERNEL_CS; + regs.xcs = __KERNEL_CS | get_kernel_rpl(); regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2; /* Ok, create the new process.. */ @@ -905,7 +897,7 @@ asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) unsigned long arch_align_stack(unsigned long sp) { - if (randomize_va_space) + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) sp -= get_random_int() % 8192; return sp & ~0xf; } diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index d3db03f4085..775f50e9395 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -185,17 +185,17 @@ static unsigned long convert_eip_to_linear(struct task_struct *child, struct pt_ return addr; } -static inline int is_at_popf(struct task_struct *child, struct pt_regs *regs) +static inline int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) { int i, copied; - unsigned char opcode[16]; + unsigned char opcode[15]; unsigned long addr = convert_eip_to_linear(child, regs); copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); for (i = 0; i < copied; i++) { switch (opcode[i]) { - /* popf */ - case 0x9d: + /* popf and iret */ + case 0x9d: case 0xcf: return 1; /* opcode and address size prefixes */ case 0x66: case 0x67: @@ -247,7 +247,7 @@ static void set_singlestep(struct task_struct *child) * don't mark it as being "us" that set it, so that we * won't clear it by hand later. */ - if (is_at_popf(child, regs)) + if (is_setting_trap_flag(child, regs)) return; child->ptrace |= PT_DTRACE; diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c index 54cfeabbc5e..84278e0093a 100644 --- a/arch/i386/kernel/reboot.c +++ b/arch/i386/kernel/reboot.c @@ -145,14 +145,10 @@ real_mode_gdt_entries [3] = 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct -{ - unsigned short size __attribute__ ((packed)); - unsigned long long * base __attribute__ ((packed)); -} -real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, real_mode_gdt_entries }, -real_mode_idt = { 0x3ff, NULL }, -no_idt = { 0, NULL }; +static struct Xgt_desc_struct +real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, +real_mode_idt = { 0x3ff, 0 }, +no_idt = { 0, 0 }; /* This is 16-bit protected mode code to disable paging and the cache, diff --git a/arch/i386/kernel/relocate_kernel.S b/arch/i386/kernel/relocate_kernel.S index d312616effa..f151d6fae46 100644 --- a/arch/i386/kernel/relocate_kernel.S +++ b/arch/i386/kernel/relocate_kernel.S @@ -7,16 +7,138 @@ */ #include <linux/linkage.h> +#include <asm/page.h> +#include <asm/kexec.h> + +/* + * Must be relocatable PIC code callable as a C function + */ + +#define PTR(x) (x << 2) +#define PAGE_ALIGNED (1 << PAGE_SHIFT) +#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ +#define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */ + + .text + .align PAGE_ALIGNED + .globl relocate_kernel +relocate_kernel: + movl 8(%esp), %ebp /* list of pages */ + +#ifdef CONFIG_X86_PAE + /* map the control page at its virtual address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0xc0000000, %eax + shrl $27, %eax + addl %edi, %eax + + movl PTR(PA_PMD_0)(%ebp), %edx + orl $PAE_PGD_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PMD_0)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0x3fe00000, %eax + shrl $18, %eax + addl %edi, %eax + + movl PTR(PA_PTE_0)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_0)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0x001ff000, %eax + shrl $9, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + /* identity map the control page at its physical address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0xc0000000, %eax + shrl $27, %eax + addl %edi, %eax + + movl PTR(PA_PMD_1)(%ebp), %edx + orl $PAE_PGD_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PMD_1)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0x3fe00000, %eax + shrl $18, %eax + addl %edi, %eax + + movl PTR(PA_PTE_1)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_1)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0x001ff000, %eax + shrl $9, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) +#else + /* map the control page at its virtual address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0xffc00000, %eax + shrl $20, %eax + addl %edi, %eax + + movl PTR(PA_PTE_0)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_0)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0x003ff000, %eax + shrl $10, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + /* identity map the control page at its physical address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0xffc00000, %eax + shrl $20, %eax + addl %edi, %eax + + movl PTR(PA_PTE_1)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_1)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0x003ff000, %eax + shrl $10, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) +#endif - /* - * Must be relocatable PIC code callable as a C function, that once - * it starts can not use the previous processes stack. - */ - .globl relocate_new_kernel relocate_new_kernel: /* read the arguments and say goodbye to the stack */ movl 4(%esp), %ebx /* page_list */ - movl 8(%esp), %ebp /* reboot_code_buffer */ + movl 8(%esp), %ebp /* list of pages */ movl 12(%esp), %edx /* start address */ movl 16(%esp), %ecx /* cpu_has_pae */ @@ -24,11 +146,26 @@ relocate_new_kernel: pushl $0 popfl - /* set a new stack at the bottom of our page... */ - lea 4096(%ebp), %esp + /* get physical address of control page now */ + /* this is impossible after page table switch */ + movl PTR(PA_CONTROL_PAGE)(%ebp), %edi - /* store the parameters back on the stack */ - pushl %edx /* store the start address */ + /* switch to new set of page tables */ + movl PTR(PA_PGD)(%ebp), %eax + movl %eax, %cr3 + + /* setup a new stack at the end of the physical control page */ + lea 4096(%edi), %esp + + /* jump to identity mapped page */ + movl %edi, %eax + addl $(identity_mapped - relocate_kernel), %eax + pushl %eax + ret + +identity_mapped: + /* store the start address on the stack */ + pushl %edx /* Set cr0 to a known state: * 31 0 == Paging disabled @@ -113,8 +250,3 @@ relocate_new_kernel: xorl %edi, %edi xorl %ebp, %ebp ret -relocate_new_kernel_end: - - .globl relocate_new_kernel_size -relocate_new_kernel_size: - .long relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/i386/kernel/semaphore.c b/arch/i386/kernel/semaphore.c deleted file mode 100644 index 98352c374c7..00000000000 --- a/arch/i386/kernel/semaphore.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * i386 semaphore implementation. - * - * (C) Copyright 1999 Linus Torvalds - * - * Portions Copyright 1999 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org> - */ -#include <asm/semaphore.h> - -/* - * The semaphore operations have a special calling sequence that - * allow us to do a simpler in-line version of them. These routines - * need to convert that sequence back into the C sequence when - * there is contention on the semaphore. - * - * %eax contains the semaphore pointer on entry. Save the C-clobbered - * registers (%eax, %edx and %ecx) except %eax whish is either a return - * value or just clobbered.. - */ -asm( -".section .sched.text\n" -".align 4\n" -".globl __down_failed\n" -"__down_failed:\n\t" -#if defined(CONFIG_FRAME_POINTER) - "pushl %ebp\n\t" - "movl %esp,%ebp\n\t" -#endif - "pushl %edx\n\t" - "pushl %ecx\n\t" - "call __down\n\t" - "popl %ecx\n\t" - "popl %edx\n\t" -#if defined(CONFIG_FRAME_POINTER) - "movl %ebp,%esp\n\t" - "popl %ebp\n\t" -#endif - "ret" -); - -asm( -".section .sched.text\n" -".align 4\n" -".globl __down_failed_interruptible\n" -"__down_failed_interruptible:\n\t" -#if defined(CONFIG_FRAME_POINTER) - "pushl %ebp\n\t" - "movl %esp,%ebp\n\t" -#endif - "pushl %edx\n\t" - "pushl %ecx\n\t" - "call __down_interruptible\n\t" - "popl %ecx\n\t" - "popl %edx\n\t" -#if defined(CONFIG_FRAME_POINTER) - "movl %ebp,%esp\n\t" - "popl %ebp\n\t" -#endif - "ret" -); - -asm( -".section .sched.text\n" -".align 4\n" -".globl __down_failed_trylock\n" -"__down_failed_trylock:\n\t" -#if defined(CONFIG_FRAME_POINTER) - "pushl %ebp\n\t" - "movl %esp,%ebp\n\t" -#endif - "pushl %edx\n\t" - "pushl %ecx\n\t" - "call __down_trylock\n\t" - "popl %ecx\n\t" - "popl %edx\n\t" -#if defined(CONFIG_FRAME_POINTER) - "movl %ebp,%esp\n\t" - "popl %ebp\n\t" -#endif - "ret" -); - -asm( -".section .sched.text\n" -".align 4\n" -".globl __up_wakeup\n" -"__up_wakeup:\n\t" - "pushl %edx\n\t" - "pushl %ecx\n\t" - "call __up\n\t" - "popl %ecx\n\t" - "popl %edx\n\t" - "ret" -); - -/* - * rw spinlock fallbacks - */ -#if defined(CONFIG_SMP) -asm( -".section .sched.text\n" -".align 4\n" -".globl __write_lock_failed\n" -"__write_lock_failed:\n\t" - LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ",(%eax)\n" -"1: rep; nop\n\t" - "cmpl $" RW_LOCK_BIAS_STR ",(%eax)\n\t" - "jne 1b\n\t" - LOCK_PREFIX "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t" - "jnz __write_lock_failed\n\t" - "ret" -); - -asm( -".section .sched.text\n" -".align 4\n" -".globl __read_lock_failed\n" -"__read_lock_failed:\n\t" - LOCK_PREFIX "incl (%eax)\n" -"1: rep; nop\n\t" - "cmpl $1,(%eax)\n\t" - "js 1b\n\t" - LOCK_PREFIX "decl (%eax)\n\t" - "js __read_lock_failed\n\t" - "ret" -); -#endif diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index f1682206d30..814cdebf737 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -53,6 +53,7 @@ #include <asm/apic.h> #include <asm/e820.h> #include <asm/mpspec.h> +#include <asm/mmzone.h> #include <asm/setup.h> #include <asm/arch_hooks.h> #include <asm/sections.h> @@ -89,18 +90,6 @@ EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -#ifdef CONFIG_ACPI - int acpi_disabled = 0; -#else - int acpi_disabled = 1; -#endif -EXPORT_SYMBOL(acpi_disabled); - -#ifdef CONFIG_ACPI -int __initdata acpi_force = 0; -extern acpi_interrupt_flags acpi_sci_flags; -#endif - /* for MCA, but anyone else can use it if they want */ unsigned int machine_id; #ifdef CONFIG_MCA @@ -148,7 +137,6 @@ EXPORT_SYMBOL(ist_info); struct e820map e820; extern void early_cpu_init(void); -extern void generic_apic_probe(char *); extern int root_mountflags; unsigned long saved_videomode; @@ -700,238 +688,150 @@ static inline void copy_edd(void) } #endif -static void __init parse_cmdline_early (char ** cmdline_p) -{ - char c = ' ', *to = command_line, *from = saved_command_line; - int len = 0; - int userdef = 0; +static int __initdata user_defined_memmap = 0; - /* Save unparsed command line copy for /proc/cmdline */ - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; +/* + * "mem=nopentium" disables the 4MB page tables. + * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM + * to <mem>, overriding the bios size. + * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from + * <start> to <start>+<mem>, overriding the bios size. + * + * HPA tells me bootloaders need to parse mem=, so no new + * option should be mem= [also see Documentation/i386/boot.txt] + */ +static int __init parse_mem(char *arg) +{ + if (!arg) + return -EINVAL; - for (;;) { - if (c != ' ') - goto next_char; - /* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to <mem>, overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * <start> to <start>+<mem>, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] + if (strcmp(arg, "nopentium") == 0) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. */ - if (!memcmp(from, "mem=", 4)) { - if (to != command_line) - to--; - if (!memcmp(from+4, "nopentium", 9)) { - from += 9+4; - clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); - disable_pse = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; - - mem_size = memparse(from+4, &from); - limit_regions(mem_size); - userdef=1; - } - } - - else if (!memcmp(from, "memmap=", 7)) { - if (to != command_line) - to--; - if (!memcmp(from+7, "exactmap", 8)) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - find_max_pfn(); - saved_max_pfn = max_pfn; -#endif - from += 8+7; - e820.nr_map = 0; - userdef = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long start_at, mem_size; + unsigned long long mem_size; - mem_size = memparse(from+7, &from); - if (*from == '@') { - start_at = memparse(from+1, &from); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*from == '#') { - start_at = memparse(from+1, &from); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*from == '$') { - start_at = memparse(from+1, &from); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - limit_regions(mem_size); - userdef=1; - } - } - } - - else if (!memcmp(from, "noexec=", 7)) - noexec_setup(from + 7); + mem_size = memparse(arg, &arg); + limit_regions(mem_size); + user_defined_memmap = 1; + } + return 0; +} +early_param("mem", parse_mem); +static int __init parse_memmap(char *arg) +{ + if (!arg) + return -EINVAL; -#ifdef CONFIG_X86_SMP - /* - * If the BIOS enumerates physical processors before logical, - * maxcpus=N at enumeration-time can be used to disable HT. + if (strcmp(arg, "exactmap") == 0) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. */ - else if (!memcmp(from, "maxcpus=", 8)) { - extern unsigned int maxcpus; - - maxcpus = simple_strtoul(from + 8, NULL, 0); - } + find_max_pfn(); + saved_max_pfn = max_pfn; #endif - -#ifdef CONFIG_ACPI - /* "acpi=off" disables both ACPI table parsing and interpreter */ - else if (!memcmp(from, "acpi=off", 8)) { - disable_acpi(); - } - - /* acpi=force to over-ride black-list */ - else if (!memcmp(from, "acpi=force", 10)) { - acpi_force = 1; - acpi_ht = 1; - acpi_disabled = 0; - } - - /* acpi=strict disables out-of-spec workarounds */ - else if (!memcmp(from, "acpi=strict", 11)) { - acpi_strict = 1; - } - - /* Limit ACPI just to boot-time to enable HT */ - else if (!memcmp(from, "acpi=ht", 7)) { - if (!acpi_force) - disable_acpi(); - acpi_ht = 1; - } - - /* "pci=noacpi" disable ACPI IRQ routing and PCI scan */ - else if (!memcmp(from, "pci=noacpi", 10)) { - acpi_disable_pci(); - } - /* "acpi=noirq" disables ACPI interrupt routing */ - else if (!memcmp(from, "acpi=noirq", 10)) { - acpi_noirq_set(); + e820.nr_map = 0; + user_defined_memmap = 1; + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long start_at, mem_size; + + mem_size = memparse(arg, &arg); + if (*arg == '@') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_RAM); + } else if (*arg == '#') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_ACPI); + } else if (*arg == '$') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_RESERVED); + } else { + limit_regions(mem_size); + user_defined_memmap = 1; } + } + return 0; +} +early_param("memmap", parse_memmap); - else if (!memcmp(from, "acpi_sci=edge", 13)) - acpi_sci_flags.trigger = 1; - - else if (!memcmp(from, "acpi_sci=level", 14)) - acpi_sci_flags.trigger = 3; - - else if (!memcmp(from, "acpi_sci=high", 13)) - acpi_sci_flags.polarity = 1; +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ +static int __init parse_elfcorehdr(char *arg) +{ + if (!arg) + return -EINVAL; - else if (!memcmp(from, "acpi_sci=low", 12)) - acpi_sci_flags.polarity = 3; + elfcorehdr_addr = memparse(arg, &arg); + return 0; +} +early_param("elfcorehdr", parse_elfcorehdr); +#endif /* CONFIG_PROC_VMCORE */ -#ifdef CONFIG_X86_IO_APIC - else if (!memcmp(from, "acpi_skip_timer_override", 24)) - acpi_skip_timer_override = 1; +/* + * highmem=size forces highmem to be exactly 'size' bytes. + * This works even on boxes that have no highmem otherwise. + * This also works to reduce highmem size on bigger boxes. + */ +static int __init parse_highmem(char *arg) +{ + if (!arg) + return -EINVAL; - if (!memcmp(from, "disable_timer_pin_1", 19)) - disable_timer_pin_1 = 1; - if (!memcmp(from, "enable_timer_pin_1", 18)) - disable_timer_pin_1 = -1; + highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT; + return 0; +} +early_param("highmem", parse_highmem); - /* disable IO-APIC */ - else if (!memcmp(from, "noapic", 6)) - disable_ioapic_setup(); -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ +/* + * vmalloc=size forces the vmalloc area to be exactly 'size' + * bytes. This can be used to increase (or decrease) the + * vmalloc area - the default is 128m. + */ +static int __init parse_vmalloc(char *arg) +{ + if (!arg) + return -EINVAL; -#ifdef CONFIG_X86_LOCAL_APIC - /* enable local APIC */ - else if (!memcmp(from, "lapic", 5)) - lapic_enable(); + __VMALLOC_RESERVE = memparse(arg, &arg); + return 0; +} +early_param("vmalloc", parse_vmalloc); - /* disable local APIC */ - else if (!memcmp(from, "nolapic", 6)) - lapic_disable(); -#endif /* CONFIG_X86_LOCAL_APIC */ +/* + * reservetop=size reserves a hole at the top of the kernel address space which + * a hypervisor can load into later. Needed for dynamically loaded hypervisors, + * so relocating the fixmap can be done before paging initialization. + */ +static int __init parse_reservetop(char *arg) +{ + unsigned long address; -#ifdef CONFIG_KEXEC - /* crashkernel=size@addr specifies the location to reserve for - * a crash kernel. By reserving this memory we guarantee - * that linux never set's it up as a DMA target. - * Useful for holding code to do something appropriate - * after a kernel panic. - */ - else if (!memcmp(from, "crashkernel=", 12)) { - unsigned long size, base; - size = memparse(from+12, &from); - if (*from == '@') { - base = memparse(from+1, &from); - /* FIXME: Do I want a sanity check - * to validate the memory range? - */ - crashk_res.start = base; - crashk_res.end = base + size - 1; - } - } -#endif -#ifdef CONFIG_PROC_VMCORE - /* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. - */ - else if (!memcmp(from, "elfcorehdr=", 11)) - elfcorehdr_addr = memparse(from+11, &from); -#endif + if (!arg) + return -EINVAL; - /* - * highmem=size forces highmem to be exactly 'size' bytes. - * This works even on boxes that have no highmem otherwise. - * This also works to reduce highmem size on bigger boxes. - */ - else if (!memcmp(from, "highmem=", 8)) - highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT; - - /* - * vmalloc=size forces the vmalloc area to be exactly 'size' - * bytes. This can be used to increase (or decrease) the - * vmalloc area - the default is 128m. - */ - else if (!memcmp(from, "vmalloc=", 8)) - __VMALLOC_RESERVE = memparse(from+8, &from); - - next_char: - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - *to = '\0'; - *cmdline_p = command_line; - if (userdef) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); - } + address = memparse(arg, &arg); + reserve_top_address(address); + return 0; } +early_param("reservetop", parse_reservetop); /* * Callback for efi_memory_walk. @@ -1170,6 +1070,14 @@ static unsigned long __init setup_memory(void) } printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", pages_to_mb(highend_pfn - highstart_pfn)); + num_physpages = highend_pfn; + high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; +#else + num_physpages = max_low_pfn; + high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1; +#endif +#ifdef CONFIG_FLATMEM + max_mapnr = num_physpages; #endif printk(KERN_NOTICE "%ldMB LOWMEM available.\n", pages_to_mb(max_low_pfn)); @@ -1181,22 +1089,20 @@ static unsigned long __init setup_memory(void) void __init zone_sizes_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; - unsigned int max_dma, low; - - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - low = max_low_pfn; - - if (low < max_dma) - zones_size[ZONE_DMA] = low; - else { - zones_size[ZONE_DMA] = max_dma; - zones_size[ZONE_NORMAL] = low - max_dma; #ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = highend_pfn - low; + unsigned long max_zone_pfns[MAX_NR_ZONES] = { + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT, + max_low_pfn, + highend_pfn}; + add_active_range(0, 0, highend_pfn); +#else + unsigned long max_zone_pfns[MAX_NR_ZONES] = { + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT, + max_low_pfn}; + add_active_range(0, 0, max_low_pfn); #endif - } - free_area_init(zones_size); + + free_area_init_nodes(max_zone_pfns); } #else extern unsigned long __init setup_memory(void); @@ -1258,7 +1164,7 @@ void __init setup_bootmem_allocator(void) */ find_smp_config(); #endif - + numa_kva_reserve(); #ifdef CONFIG_BLK_DEV_INITRD if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { @@ -1499,17 +1405,15 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; - parse_cmdline_early(cmdline_p); + parse_early_param(); -#ifdef CONFIG_EARLY_PRINTK - { - char *s = strstr(*cmdline_p, "earlyprintk="); - if (s) { - setup_early_printk(strchr(s, '=') + 1); - printk("early console enabled\n"); - } + if (user_defined_memmap) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + print_memory_map("user"); } -#endif + + strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; max_low_pfn = setup_memory(); @@ -1538,7 +1442,7 @@ void __init setup_arch(char **cmdline_p) dmi_scan_machine(); #ifdef CONFIG_X86_GENERICARCH - generic_apic_probe(*cmdline_p); + generic_apic_probe(); #endif if (efi_enabled) efi_map_memmap(); @@ -1550,9 +1454,11 @@ void __init setup_arch(char **cmdline_p) acpi_boot_table_init(); #endif +#ifdef CONFIG_PCI #ifdef CONFIG_X86_IO_APIC check_acpi_pci(); /* Checks more than just ACPI actually */ #endif +#endif #ifdef CONFIG_ACPI acpi_boot_init(); diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index c10789d7a9d..465188e2d70 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -634,3 +634,69 @@ fastcall void smp_call_function_interrupt(struct pt_regs *regs) } } +/* + * this function sends a 'generic call function' IPI to one other CPU + * in the system. + * + * cpu is a standard Linux logical CPU number. + */ +static void +__smp_call_function_single(int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + struct call_data_struct data; + int cpus = 1; + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + call_data = &data; + wmb(); + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR); + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) + cpu_relax(); + + if (!wait) + return; + + while (atomic_read(&data.finished) != cpus) + cpu_relax(); +} + +/* + * smp_call_function_single - Run a function on another CPU + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: Currently unused. + * @wait: If true, wait until function has completed on other CPUs. + * + * Retrurns 0 on success, else a negative status code. + * + * Does not return until the remote CPU is nearly ready to execute <func> + * or is or has executed. + */ + +int smp_call_function_single(int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + /* prevent preemption and reschedule on another processor */ + int me = get_cpu(); + if (cpu == me) { + WARN_ON(1); + put_cpu(); + return -EBUSY; + } + spin_lock_bh(&call_lock); + __smp_call_function_single(cpu, func, info, nonatomic, wait); + spin_unlock_bh(&call_lock); + put_cpu(); + return 0; +} +EXPORT_SYMBOL(smp_call_function_single); diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index f948419c888..020d873b7d2 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -177,6 +177,9 @@ static void __devinit smp_store_cpu_info(int id) */ if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) { + if (num_possible_cpus() == 1) + goto valid_k7; + /* Athlon 660/661 is valid. */ if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1))) goto valid_k7; @@ -642,9 +645,13 @@ static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); int apicid = logical_smp_processor_id(); + int node = apicid_to_node(apicid); + + if (!node_online(node)) + node = first_online_node; cpu_2_logical_apicid[cpu] = apicid; - map_cpu_to_node(cpu, apicid_to_node(apicid)); + map_cpu_to_node(cpu, node); } static void unmap_cpu_to_logical_apicid(int cpu) @@ -1372,7 +1379,8 @@ int __cpu_disable(void) */ if (cpu == 0) return -EBUSY; - + if (nmi_watchdog == NMI_LOCAL_APIC) + stop_apic_nmi_watchdog(NULL); clear_local_APIC(); /* Allow any queued timer interrupts to get serviced */ local_irq_enable(); @@ -1486,3 +1494,16 @@ void __init smp_intr_init(void) /* IPI for generic function call */ set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); } + +/* + * If the BIOS enumerates physical processors before logical, + * maxcpus=N at enumeration-time can be used to disable HT. + */ +static int __init parse_maxcpus(char *arg) +{ + extern unsigned int maxcpus; + + maxcpus = simple_strtoul(arg, NULL, 0); + return 0; +} +early_param("maxcpus", parse_maxcpus); diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index b1809c9a089..32413122c4c 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -42,7 +42,7 @@ #define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) static u8 pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ -#define MAX_CHUNKS_PER_NODE 4 +#define MAX_CHUNKS_PER_NODE 3 #define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) struct node_memory_chunk_s { unsigned long start_pfn; @@ -54,8 +54,6 @@ struct node_memory_chunk_s { static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS]; static int num_memory_chunks; /* total number of memory chunks */ -static int zholes_size_init; -static unsigned long zholes_size[MAX_NUMNODES * MAX_NR_ZONES]; extern void * boot_ioremap(unsigned long, unsigned long); @@ -135,50 +133,6 @@ static void __init parse_memory_affinity_structure (char *sratp) "enabled and removable" : "enabled" ) ); } -#if MAX_NR_ZONES != 4 -#error "MAX_NR_ZONES != 4, chunk_to_zone requires review" -#endif -/* Take a chunk of pages from page frame cstart to cend and count the number - * of pages in each zone, returned via zones[]. - */ -static __init void chunk_to_zones(unsigned long cstart, unsigned long cend, - unsigned long *zones) -{ - unsigned long max_dma; - extern unsigned long max_low_pfn; - - int z; - unsigned long rend; - - /* FIXME: MAX_DMA_ADDRESS and max_low_pfn are trying to provide - * similarly scoped information and should be handled in a consistant - * manner. - */ - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - - /* Split the hole into the zones in which it falls. Repeatedly - * take the segment in which the remaining hole starts, round it - * to the end of that zone. - */ - memset(zones, 0, MAX_NR_ZONES * sizeof(long)); - while (cstart < cend) { - if (cstart < max_dma) { - z = ZONE_DMA; - rend = (cend < max_dma)? cend : max_dma; - - } else if (cstart < max_low_pfn) { - z = ZONE_NORMAL; - rend = (cend < max_low_pfn)? cend : max_low_pfn; - - } else { - z = ZONE_HIGHMEM; - rend = cend; - } - zones[z] += rend - cstart; - cstart = rend; - } -} - /* * The SRAT table always lists ascending addresses, so can always * assume that the first "start" address that you see is the real @@ -223,7 +177,6 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */ memset(node_memory_chunk, 0, sizeof(node_memory_chunk)); - memset(zholes_size, 0, sizeof(zholes_size)); num_memory_chunks = 0; while (p < end) { @@ -287,6 +240,7 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", j, chunk->nid, chunk->start_pfn, chunk->end_pfn); node_read_chunk(chunk->nid, chunk); + add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn); } for_each_online_node(nid) { @@ -395,57 +349,7 @@ int __init get_memcfg_from_srat(void) return acpi20_parse_srat((struct acpi_table_srat *)header); } out_err: + remove_all_active_ranges(); printk("failed to get NUMA memory information from SRAT table\n"); return 0; } - -/* For each node run the memory list to determine whether there are - * any memory holes. For each hole determine which ZONE they fall - * into. - * - * NOTE#1: this requires knowledge of the zone boundries and so - * _cannot_ be performed before those are calculated in setup_memory. - * - * NOTE#2: we rely on the fact that the memory chunks are ordered by - * start pfn number during setup. - */ -static void __init get_zholes_init(void) -{ - int nid; - int c; - int first; - unsigned long end = 0; - - for_each_online_node(nid) { - first = 1; - for (c = 0; c < num_memory_chunks; c++){ - if (node_memory_chunk[c].nid == nid) { - if (first) { - end = node_memory_chunk[c].end_pfn; - first = 0; - - } else { - /* Record any gap between this chunk - * and the previous chunk on this node - * against the zones it spans. - */ - chunk_to_zones(end, - node_memory_chunk[c].start_pfn, - &zholes_size[nid * MAX_NR_ZONES]); - } - } - } - } -} - -unsigned long * __init get_zholes_size(int nid) -{ - if (!zholes_size_init) { - zholes_size_init++; - get_zholes_init(); - } - if (nid >= MAX_NUMNODES || !node_online(nid)) - printk("%s: nid = %d is invalid/offline. num_online_nodes = %d", - __FUNCTION__, nid, num_online_nodes()); - return &zholes_size[nid * MAX_NR_ZONES]; -} diff --git a/arch/i386/kernel/stacktrace.c b/arch/i386/kernel/stacktrace.c deleted file mode 100644 index e62a037ab39..00000000000 --- a/arch/i386/kernel/stacktrace.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * arch/i386/kernel/stacktrace.c - * - * Stack trace management functions - * - * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> - */ -#include <linux/sched.h> -#include <linux/stacktrace.h> - -static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) -{ - return p > (void *)tinfo && - p < (void *)tinfo + THREAD_SIZE - 3; -} - -/* - * Save stack-backtrace addresses into a stack_trace buffer: - */ -static inline unsigned long -save_context_stack(struct stack_trace *trace, unsigned int skip, - struct thread_info *tinfo, unsigned long *stack, - unsigned long ebp) -{ - unsigned long addr; - -#ifdef CONFIG_FRAME_POINTER - while (valid_stack_ptr(tinfo, (void *)ebp)) { - addr = *(unsigned long *)(ebp + 4); - if (!skip) - trace->entries[trace->nr_entries++] = addr; - else - skip--; - if (trace->nr_entries >= trace->max_entries) - break; - /* - * break out of recursive entries (such as - * end_of_stack_stop_unwind_function): - */ - if (ebp == *(unsigned long *)ebp) - break; - - ebp = *(unsigned long *)ebp; - } -#else - while (valid_stack_ptr(tinfo, stack)) { - addr = *stack++; - if (__kernel_text_address(addr)) { - if (!skip) - trace->entries[trace->nr_entries++] = addr; - else - skip--; - if (trace->nr_entries >= trace->max_entries) - break; - } - } -#endif - - return ebp; -} - -/* - * Save stack-backtrace addresses into a stack_trace buffer. - * If all_contexts is set, all contexts (hardirq, softirq and process) - * are saved. If not set then only the current context is saved. - */ -void save_stack_trace(struct stack_trace *trace, - struct task_struct *task, int all_contexts, - unsigned int skip) -{ - unsigned long ebp; - unsigned long *stack = &ebp; - - WARN_ON(trace->nr_entries || !trace->max_entries); - - if (!task || task == current) { - /* Grab ebp right from our regs: */ - asm ("movl %%ebp, %0" : "=r" (ebp)); - } else { - /* ebp is the last reg pushed by switch_to(): */ - ebp = *(unsigned long *) task->thread.esp; - } - - while (1) { - struct thread_info *context = (struct thread_info *) - ((unsigned long)stack & (~(THREAD_SIZE - 1))); - - ebp = save_context_stack(trace, skip, context, stack, ebp); - stack = (unsigned long *)context->previous_esp; - if (!all_contexts || !stack || - trace->nr_entries >= trace->max_entries) - break; - trace->entries[trace->nr_entries++] = ULONG_MAX; - if (trace->nr_entries >= trace->max_entries) - break; - } -} - diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S index dd63d477539..7e639f78b0b 100644 --- a/arch/i386/kernel/syscall_table.S +++ b/arch/i386/kernel/syscall_table.S @@ -317,3 +317,4 @@ ENTRY(sys_call_table) .long sys_tee /* 315 */ .long sys_vmsplice .long sys_move_pages + .long sys_getcpu diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index edd00f6cee3..86944acfb64 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -130,18 +130,33 @@ static int set_rtc_mmss(unsigned long nowtime) int timer_ack; -#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER) unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); - if (!user_mode_vm(regs) && in_lock_functions(pc)) +#ifdef CONFIG_SMP + if (!user_mode_vm(regs) && in_lock_functions(pc)) { +#ifdef CONFIG_FRAME_POINTER return *(unsigned long *)(regs->ebp + 4); - +#else + unsigned long *sp; + if ((regs->xcs & 3) == 0) + sp = (unsigned long *)®s->esp; + else + sp = (unsigned long *)regs->esp; + /* Return address is either directly at stack pointer + or above a saved eflags. Eflags has bits 22-31 zero, + kernel addresses don't. */ + if (sp[0] >> 22) + return sp[0]; + if (sp[1] >> 22) + return sp[1]; +#endif + } +#endif return pc; } EXPORT_SYMBOL(profile_pc); -#endif /* * This is the same as the above, except we _also_ save the current @@ -270,16 +285,19 @@ void notify_arch_cmos_timer(void) mod_timer(&sync_cmos_timer, jiffies + 1); } -static long clock_cmos_diff, sleep_start; +static long clock_cmos_diff; +static unsigned long sleep_start; static int timer_suspend(struct sys_device *dev, pm_message_t state) { /* * Estimate time zone so that set_time can update the clock */ - clock_cmos_diff = -get_cmos_time(); + unsigned long ctime = get_cmos_time(); + + clock_cmos_diff = -ctime; clock_cmos_diff += get_seconds(); - sleep_start = get_cmos_time(); + sleep_start = ctime; return 0; } @@ -287,18 +305,29 @@ static int timer_resume(struct sys_device *dev) { unsigned long flags; unsigned long sec; - unsigned long sleep_length; - + unsigned long ctime = get_cmos_time(); + long sleep_length = (ctime - sleep_start) * HZ; + struct timespec ts; + + if (sleep_length < 0) { + printk(KERN_WARNING "CMOS clock skew detected in timer resume!\n"); + /* The time after the resume must not be earlier than the time + * before the suspend or some nasty things will happen + */ + sleep_length = 0; + ctime = sleep_start; + } #ifdef CONFIG_HPET_TIMER if (is_hpet_enabled()) hpet_reenable(); #endif setup_pit_timer(); - sec = get_cmos_time() + clock_cmos_diff; - sleep_length = (get_cmos_time() - sleep_start) * HZ; + + sec = ctime + clock_cmos_diff; + ts.tv_sec = sec; + ts.tv_nsec = 0; + do_settimeofday(&ts); write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = sec; - xtime.tv_nsec = 0; jiffies_64 += sleep_length; wall_jiffies += sleep_length; write_sequnlock_irqrestore(&xtime_lock, flags); @@ -334,10 +363,11 @@ extern void (*late_time_init)(void); /* Duplicate of time_init() below, with hpet_enable part added */ static void __init hpet_time_init(void) { - xtime.tv_sec = get_cmos_time(); - xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); + struct timespec ts; + ts.tv_sec = get_cmos_time(); + ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); + + do_settimeofday(&ts); if ((hpet_enable() >= 0) && hpet_use_timer) { printk("Using HPET for base-timer\n"); @@ -349,6 +379,7 @@ static void __init hpet_time_init(void) void __init time_init(void) { + struct timespec ts; #ifdef CONFIG_HPET_TIMER if (is_hpet_capable()) { /* @@ -359,10 +390,10 @@ void __init time_init(void) return; } #endif - xtime.tv_sec = get_cmos_time(); - xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); + ts.tv_sec = get_cmos_time(); + ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); + + do_settimeofday(&ts); time_init_hook(); } diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c index 14a1376fedd..6bf14a4e995 100644 --- a/arch/i386/kernel/time_hpet.c +++ b/arch/i386/kernel/time_hpet.c @@ -301,23 +301,25 @@ int hpet_rtc_timer_init(void) hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; local_irq_save(flags); + cnt = hpet_readl(HPET_COUNTER); cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); hpet_writel(cnt, HPET_T1_CMP); hpet_t1_cmp = cnt; - local_irq_restore(flags); cfg = hpet_readl(HPET_T1_CFG); cfg &= ~HPET_TN_PERIODIC; cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; hpet_writel(cfg, HPET_T1_CFG); + local_irq_restore(flags); + return 1; } static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, cnt; + unsigned int cfg, cnt, ticks_per_int, lost_ints; if (unlikely(!(PIE_on | AIE_on | UIE_on))) { cfg = hpet_readl(HPET_T1_CFG); @@ -332,10 +334,33 @@ static void hpet_rtc_timer_reinit(void) hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; /* It is more accurate to use the comparator value than current count.*/ - cnt = hpet_t1_cmp; - cnt += hpet_tick*HZ/hpet_rtc_int_freq; - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; + ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; + hpet_t1_cmp += ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + /* + * If the interrupt handler was delayed too long, the write above tries + * to schedule the next interrupt in the past and the hardware would + * not interrupt until the counter had wrapped around. + * So we have to check that the comparator wasn't set to a past time. + */ + cnt = hpet_readl(HPET_COUNTER); + if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { + lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; + /* Make sure that, even with the time needed to execute + * this code, the next scheduled interrupt has been moved + * back to the future: */ + lost_ints++; + + hpet_t1_cmp += lost_ints * ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + if (PIE_on) + PIE_count += lost_ints; + + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); + } } /* diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c index e2e281d4bcc..07d6da36a82 100644 --- a/arch/i386/kernel/topology.c +++ b/arch/i386/kernel/topology.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/nodemask.h> +#include <linux/mmzone.h> #include <asm/cpu.h> static struct i386_cpu cpu_devices[NR_CPUS]; @@ -55,34 +56,18 @@ EXPORT_SYMBOL(arch_register_cpu); EXPORT_SYMBOL(arch_unregister_cpu); #endif /*CONFIG_HOTPLUG_CPU*/ - - -#ifdef CONFIG_NUMA -#include <linux/mmzone.h> - static int __init topology_init(void) { int i; +#ifdef CONFIG_NUMA for_each_online_node(i) register_one_node(i); +#endif /* CONFIG_NUMA */ for_each_present_cpu(i) arch_register_cpu(i); return 0; } -#else /* !CONFIG_NUMA */ - -static int __init topology_init(void) -{ - int i; - - for_each_present_cpu(i) - arch_register_cpu(i); - return 0; -} - -#endif /* CONFIG_NUMA */ - subsys_initcall(topology_init); diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 7e9edafffd8..a13037fe0ee 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -28,6 +28,7 @@ #include <linux/kprobes.h> #include <linux/kexec.h> #include <linux/unwind.h> +#include <linux/uaccess.h> #ifdef CONFIG_EISA #include <linux/ioport.h> @@ -40,7 +41,6 @@ #include <asm/processor.h> #include <asm/system.h> -#include <asm/uaccess.h> #include <asm/io.h> #include <asm/atomic.h> #include <asm/debugreg.h> @@ -51,6 +51,7 @@ #include <asm/smp.h> #include <asm/arch_hooks.h> #include <asm/kdebug.h> +#include <asm/stacktrace.h> #include <linux/module.h> @@ -118,26 +119,16 @@ static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) p < (void *)tinfo + THREAD_SIZE - 3; } -/* - * Print one address/symbol entries per line. - */ -static inline void print_addr_and_symbol(unsigned long addr, char *log_lvl) -{ - printk(" [<%08lx>] ", addr); - - print_symbol("%s\n", addr); -} - static inline unsigned long print_context_stack(struct thread_info *tinfo, unsigned long *stack, unsigned long ebp, - char *log_lvl) + struct stacktrace_ops *ops, void *data) { unsigned long addr; #ifdef CONFIG_FRAME_POINTER while (valid_stack_ptr(tinfo, (void *)ebp)) { addr = *(unsigned long *)(ebp + 4); - print_addr_and_symbol(addr, log_lvl); + ops->address(data, addr); /* * break out of recursive entries (such as * end_of_stack_stop_unwind_function): @@ -150,30 +141,37 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo, while (valid_stack_ptr(tinfo, stack)) { addr = *stack++; if (__kernel_text_address(addr)) - print_addr_and_symbol(addr, log_lvl); + ops->address(data, addr); } #endif return ebp; } +struct ops_and_data { + struct stacktrace_ops *ops; + void *data; +}; + static asmlinkage int -show_trace_unwind(struct unwind_frame_info *info, void *log_lvl) +dump_trace_unwind(struct unwind_frame_info *info, void *data) { + struct ops_and_data *oad = (struct ops_and_data *)data; int n = 0; while (unwind(info) == 0 && UNW_PC(info)) { n++; - print_addr_and_symbol(UNW_PC(info), log_lvl); + oad->ops->address(oad->data, UNW_PC(info)); if (arch_unw_user_mode(info)) break; } return n; } -static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, char *log_lvl) +void dump_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, + struct stacktrace_ops *ops, void *data) { - unsigned long ebp; + unsigned long ebp = 0; if (!task) task = current; @@ -181,54 +179,116 @@ static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, if (call_trace >= 0) { int unw_ret = 0; struct unwind_frame_info info; + struct ops_and_data oad = { .ops = ops, .data = data }; if (regs) { if (unwind_init_frame_info(&info, task, regs) == 0) - unw_ret = show_trace_unwind(&info, log_lvl); + unw_ret = dump_trace_unwind(&info, &oad); } else if (task == current) - unw_ret = unwind_init_running(&info, show_trace_unwind, log_lvl); + unw_ret = unwind_init_running(&info, dump_trace_unwind, &oad); else { if (unwind_init_blocked(&info, task) == 0) - unw_ret = show_trace_unwind(&info, log_lvl); + unw_ret = dump_trace_unwind(&info, &oad); } if (unw_ret > 0) { if (call_trace == 1 && !arch_unw_user_mode(&info)) { - print_symbol("DWARF2 unwinder stuck at %s\n", + ops->warning_symbol(data, "DWARF2 unwinder stuck at %s\n", UNW_PC(&info)); if (UNW_SP(&info) >= PAGE_OFFSET) { - printk("Leftover inexact backtrace:\n"); + ops->warning(data, "Leftover inexact backtrace:\n"); stack = (void *)UNW_SP(&info); + if (!stack) + return; + ebp = UNW_FP(&info); } else - printk("Full inexact backtrace again:\n"); + ops->warning(data, "Full inexact backtrace again:\n"); } else if (call_trace >= 1) return; else - printk("Full inexact backtrace again:\n"); + ops->warning(data, "Full inexact backtrace again:\n"); } else - printk("Inexact backtrace:\n"); + ops->warning(data, "Inexact backtrace:\n"); + } + if (!stack) { + unsigned long dummy; + stack = &dummy; + if (task && task != current) + stack = (unsigned long *)task->thread.esp; } - if (task == current) { - /* Grab ebp right from our regs */ - asm ("movl %%ebp, %0" : "=r" (ebp) : ); - } else { - /* ebp is the last reg pushed by switch_to */ - ebp = *(unsigned long *) task->thread.esp; +#ifdef CONFIG_FRAME_POINTER + if (!ebp) { + if (task == current) { + /* Grab ebp right from our regs */ + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } else { + /* ebp is the last reg pushed by switch_to */ + ebp = *(unsigned long *) task->thread.esp; + } } +#endif while (1) { struct thread_info *context; context = (struct thread_info *) ((unsigned long)stack & (~(THREAD_SIZE - 1))); - ebp = print_context_stack(context, stack, ebp, log_lvl); + ebp = print_context_stack(context, stack, ebp, ops, data); + /* Should be after the line below, but somewhere + in early boot context comes out corrupted and we + can't reference it -AK */ + if (ops->stack(data, "IRQ") < 0) + break; stack = (unsigned long*)context->previous_esp; if (!stack) break; - printk("%s =======================\n", log_lvl); } } +EXPORT_SYMBOL(dump_trace); + +static void +print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) +{ + printk(data); + print_symbol(msg, symbol); + printk("\n"); +} + +static void print_trace_warning(void *data, char *msg) +{ + printk("%s%s\n", (char *)data, msg); +} + +static int print_trace_stack(void *data, char *name) +{ + return 0; +} + +/* + * Print one address/symbol entries per line. + */ +static void print_trace_address(void *data, unsigned long addr) +{ + printk("%s [<%08lx>] ", (char *)data, addr); + print_symbol("%s\n", addr); +} + +static struct stacktrace_ops print_trace_ops = { + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, +}; + +static void +show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long * stack, char *log_lvl) +{ + dump_trace(task, regs, stack, &print_trace_ops, log_lvl); + printk("%s =======================\n", log_lvl); +} -void show_trace(struct task_struct *task, struct pt_regs *regs, unsigned long * stack) +void show_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long * stack) { show_trace_log_lvl(task, regs, stack, ""); } @@ -291,8 +351,9 @@ void show_registers(struct pt_regs *regs) ss = regs->xss & 0xffff; } print_modules(); - printk(KERN_EMERG "CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\n" - "EFLAGS: %08lx (%s %.*s) \n", + printk(KERN_EMERG "CPU: %d\n" + KERN_EMERG "EIP: %04x:[<%08lx>] %s VLI\n" + KERN_EMERG "EFLAGS: %08lx (%s %.*s)\n", smp_processor_id(), 0xffff & regs->xcs, regs->eip, print_tainted(), regs->eflags, system_utsname.release, (int)strcspn(system_utsname.version, " "), @@ -313,6 +374,8 @@ void show_registers(struct pt_regs *regs) */ if (in_kernel) { u8 __user *eip; + int code_bytes = 64; + unsigned char c; printk("\n" KERN_EMERG "Stack: "); show_stack_log_lvl(NULL, regs, (unsigned long *)esp, KERN_EMERG); @@ -320,9 +383,12 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Code: "); eip = (u8 __user *)regs->eip - 43; - for (i = 0; i < 64; i++, eip++) { - unsigned char c; - + if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c, eip)) { + /* try starting at EIP */ + eip = (u8 __user *)regs->eip; + code_bytes = 32; + } + for (i = 0; i < code_bytes; i++, eip++) { if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c, eip)) { printk(" Bad EIP value."); break; @@ -343,7 +409,7 @@ static void handle_BUG(struct pt_regs *regs) if (eip < PAGE_OFFSET) return; - if (__get_user(ud2, (unsigned short __user *)eip)) + if (probe_kernel_address((unsigned short __user *)eip, ud2)) return; if (ud2 != 0x0b0f) return; @@ -356,7 +422,8 @@ static void handle_BUG(struct pt_regs *regs) char *file; char c; - if (__get_user(line, (unsigned short __user *)(eip + 2))) + if (probe_kernel_address((unsigned short __user *)(eip + 2), + line)) break; if (__get_user(file, (char * __user *)(eip + 4)) || (unsigned long)file < PAGE_OFFSET || __get_user(c, file)) @@ -629,18 +696,24 @@ gp_in_kernel: } } -static void mem_parity_error(unsigned char reason, struct pt_regs * regs) +static __kprobes void +mem_parity_error(unsigned char reason, struct pt_regs * regs) { - printk(KERN_EMERG "Uhhuh. NMI received. Dazed and confused, but trying " - "to continue\n"); + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on " + "CPU %d.\n", reason, smp_processor_id()); printk(KERN_EMERG "You probably have a hardware problem with your RAM " "chips\n"); + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); /* Clear and disable the memory parity error line. */ clear_mem_error(reason); } -static void io_check_error(unsigned char reason, struct pt_regs * regs) +static __kprobes void +io_check_error(unsigned char reason, struct pt_regs * regs) { unsigned long i; @@ -656,7 +729,8 @@ static void io_check_error(unsigned char reason, struct pt_regs * regs) outb(reason, 0x61); } -static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs) +static __kprobes void +unknown_nmi_error(unsigned char reason, struct pt_regs * regs) { #ifdef CONFIG_MCA /* Might actually be able to figure out what the guilty party @@ -666,15 +740,18 @@ static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs) return; } #endif - printk("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", - reason, smp_processor_id()); - printk("Dazed and confused, but trying to continue\n"); - printk("Do you have a strange power saving mode enabled?\n"); + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on " + "CPU %d.\n", reason, smp_processor_id()); + printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); } static DEFINE_SPINLOCK(nmi_print_lock); -void die_nmi (struct pt_regs *regs, const char *msg) +void __kprobes die_nmi(struct pt_regs *regs, const char *msg) { if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) @@ -706,7 +783,7 @@ void die_nmi (struct pt_regs *regs, const char *msg) do_exit(SIGSEGV); } -static void default_do_nmi(struct pt_regs * regs) +static __kprobes void default_do_nmi(struct pt_regs * regs) { unsigned char reason = 0; @@ -723,12 +800,12 @@ static void default_do_nmi(struct pt_regs * regs) * Ok, so this is none of the documented NMI sources, * so it must be the NMI watchdog. */ - if (nmi_watchdog) { - nmi_watchdog_tick(regs); + if (nmi_watchdog_tick(regs, reason)) return; - } + if (!do_nmi_callback(regs, smp_processor_id())) #endif - unknown_nmi_error(reason, regs); + unknown_nmi_error(reason, regs); + return; } if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) @@ -744,14 +821,7 @@ static void default_do_nmi(struct pt_regs * regs) reassert_nmi(); } -static int dummy_nmi_callback(struct pt_regs * regs, int cpu) -{ - return 0; -} - -static nmi_callback_t nmi_callback = dummy_nmi_callback; - -fastcall void do_nmi(struct pt_regs * regs, long error_code) +fastcall __kprobes void do_nmi(struct pt_regs * regs, long error_code) { int cpu; @@ -761,25 +831,11 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) ++nmi_count(cpu); - if (!rcu_dereference(nmi_callback)(regs, cpu)) - default_do_nmi(regs); + default_do_nmi(regs); nmi_exit(); } -void set_nmi_callback(nmi_callback_t callback) -{ - vmalloc_sync_all(); - rcu_assign_pointer(nmi_callback, callback); -} -EXPORT_SYMBOL_GPL(set_nmi_callback); - -void unset_nmi_callback(void) -{ - nmi_callback = dummy_nmi_callback; -} -EXPORT_SYMBOL_GPL(unset_nmi_callback); - #ifdef CONFIG_KPROBES fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code) { @@ -1119,20 +1175,6 @@ void __init trap_init_f00f_bug(void) } #endif -#define _set_gate(gate_addr,type,dpl,addr,seg) \ -do { \ - int __d0, __d1; \ - __asm__ __volatile__ ("movw %%dx,%%ax\n\t" \ - "movw %4,%%dx\n\t" \ - "movl %%eax,%0\n\t" \ - "movl %%edx,%1" \ - :"=m" (*((long *) (gate_addr))), \ - "=m" (*(1+(long *) (gate_addr))), "=&a" (__d0), "=&d" (__d1) \ - :"i" ((short) (0x8000+(dpl<<13)+(type<<8))), \ - "3" ((char *) (addr)),"2" ((seg) << 16)); \ -} while (0) - - /* * This needs to use 'idt_table' rather than 'idt', and * thus use the _nonmapped_ version of the IDT, as the @@ -1141,7 +1183,7 @@ do { \ */ void set_intr_gate(unsigned int n, void *addr) { - _set_gate(idt_table+n,14,0,addr,__KERNEL_CS); + _set_gate(n, DESCTYPE_INT, addr, __KERNEL_CS); } /* @@ -1149,22 +1191,22 @@ void set_intr_gate(unsigned int n, void *addr) */ static inline void set_system_intr_gate(unsigned int n, void *addr) { - _set_gate(idt_table+n, 14, 3, addr, __KERNEL_CS); + _set_gate(n, DESCTYPE_INT | DESCTYPE_DPL3, addr, __KERNEL_CS); } static void __init set_trap_gate(unsigned int n, void *addr) { - _set_gate(idt_table+n,15,0,addr,__KERNEL_CS); + _set_gate(n, DESCTYPE_TRAP, addr, __KERNEL_CS); } static void __init set_system_gate(unsigned int n, void *addr) { - _set_gate(idt_table+n,15,3,addr,__KERNEL_CS); + _set_gate(n, DESCTYPE_TRAP | DESCTYPE_DPL3, addr, __KERNEL_CS); } static void __init set_task_gate(unsigned int n, unsigned int gdt_entry) { - _set_gate(idt_table+n,5,0,0,(gdt_entry<<3)); + _set_gate(n, DESCTYPE_TASK, (void *)0, (gdt_entry<<3)); } diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 7e0d8dab207..b8fa0a8b2e4 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -192,7 +192,7 @@ int recalibrate_cpu_khz(void) EXPORT_SYMBOL(recalibrate_cpu_khz); -void tsc_init(void) +void __init tsc_init(void) { if (!cpu_has_tsc || tsc_disable) return; diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 2d4f1386e2b..1e7ac1c44dd 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -13,6 +13,12 @@ OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386) ENTRY(phys_startup_32) jiffies = jiffies_64; + +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(4); /* R__ */ +} SECTIONS { . = __KERNEL_START; @@ -26,7 +32,7 @@ SECTIONS KPROBES_TEXT *(.fixup) *(.gnu.warning) - } = 0x9090 + } :text = 0x9090 _etext = .; /* End of text section */ @@ -48,7 +54,7 @@ SECTIONS .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ *(.data) CONSTRUCTORS - } + } :data . = ALIGN(4096); __nosave_begin = .; @@ -184,4 +190,6 @@ SECTIONS STABS_DEBUG DWARF_DEBUG + + NOTES } diff --git a/arch/i386/lib/Makefile b/arch/i386/lib/Makefile index 914933e9ec3..d86a548b8d5 100644 --- a/arch/i386/lib/Makefile +++ b/arch/i386/lib/Makefile @@ -4,6 +4,6 @@ lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \ - bitops.o + bitops.o semaphore.o lib-$(CONFIG_X86_USE_3DNOW) += mmx.o diff --git a/arch/i386/lib/semaphore.S b/arch/i386/lib/semaphore.S new file mode 100644 index 00000000000..01f80b5c45d --- /dev/null +++ b/arch/i386/lib/semaphore.S @@ -0,0 +1,217 @@ +/* + * i386 semaphore implementation. + * + * (C) Copyright 1999 Linus Torvalds + * + * Portions Copyright 1999 Red Hat, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org> + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/rwlock.h> +#include <asm/alternative-asm.i> +#include <asm/frame.i> +#include <asm/dwarf2.h> + +/* + * The semaphore operations have a special calling sequence that + * allow us to do a simpler in-line version of them. These routines + * need to convert that sequence back into the C sequence when + * there is contention on the semaphore. + * + * %eax contains the semaphore pointer on entry. Save the C-clobbered + * registers (%eax, %edx and %ecx) except %eax whish is either a return + * value or just clobbered.. + */ + .section .sched.text +ENTRY(__down_failed) + CFI_STARTPROC + FRAME + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx,0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + call __down + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ecx + popl %edx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE edx + ENDFRAME + ret + CFI_ENDPROC + END(__down_failed) + +ENTRY(__down_failed_interruptible) + CFI_STARTPROC + FRAME + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx,0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + call __down_interruptible + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ecx + popl %edx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE edx + ENDFRAME + ret + CFI_ENDPROC + END(__down_failed_interruptible) + +ENTRY(__down_failed_trylock) + CFI_STARTPROC + FRAME + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx,0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + call __down_trylock + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ecx + popl %edx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE edx + ENDFRAME + ret + CFI_ENDPROC + END(__down_failed_trylock) + +ENTRY(__up_wakeup) + CFI_STARTPROC + FRAME + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx,0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + call __up + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ecx + popl %edx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE edx + ENDFRAME + ret + CFI_ENDPROC + END(__up_wakeup) + +/* + * rw spinlock fallbacks + */ +#ifdef CONFIG_SMP +ENTRY(__write_lock_failed) + CFI_STARTPROC simple + FRAME +2: LOCK_PREFIX + addl $ RW_LOCK_BIAS,(%eax) +1: rep; nop + cmpl $ RW_LOCK_BIAS,(%eax) + jne 1b + LOCK_PREFIX + subl $ RW_LOCK_BIAS,(%eax) + jnz 2b + ENDFRAME + ret + CFI_ENDPROC + END(__write_lock_failed) + +ENTRY(__read_lock_failed) + CFI_STARTPROC + FRAME +2: LOCK_PREFIX + incl (%eax) +1: rep; nop + cmpl $1,(%eax) + js 1b + LOCK_PREFIX + decl (%eax) + js 2b + ENDFRAME + ret + CFI_ENDPROC + END(__read_lock_failed) + +#endif + +/* Fix up special calling conventions */ +ENTRY(call_rwsem_down_read_failed) + CFI_STARTPROC + push %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + push %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx,0 + call rwsem_down_read_failed + pop %edx + CFI_ADJUST_CFA_OFFSET -4 + pop %ecx + CFI_ADJUST_CFA_OFFSET -4 + ret + CFI_ENDPROC + END(call_rwsem_down_read_failed) + +ENTRY(call_rwsem_down_write_failed) + CFI_STARTPROC + push %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + calll rwsem_down_write_failed + pop %ecx + CFI_ADJUST_CFA_OFFSET -4 + ret + CFI_ENDPROC + END(call_rwsem_down_write_failed) + +ENTRY(call_rwsem_wake) + CFI_STARTPROC + decw %dx /* do nothing if still outstanding active readers */ + jnz 1f + push %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + call rwsem_wake + pop %ecx + CFI_ADJUST_CFA_OFFSET -4 +1: ret + CFI_ENDPROC + END(call_rwsem_wake) + +/* Fix up special calling conventions */ +ENTRY(call_rwsem_downgrade_wake) + CFI_STARTPROC + push %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx,0 + push %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx,0 + call rwsem_downgrade_wake + pop %edx + CFI_ADJUST_CFA_OFFSET -4 + pop %ecx + CFI_ADJUST_CFA_OFFSET -4 + ret + CFI_ENDPROC + END(call_rwsem_downgrade_wake) + diff --git a/arch/i386/mach-generic/bigsmp.c b/arch/i386/mach-generic/bigsmp.c index ef7a6e6fcb9..33d9f93557b 100644 --- a/arch/i386/mach-generic/bigsmp.c +++ b/arch/i386/mach-generic/bigsmp.c @@ -5,6 +5,7 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> +#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> diff --git a/arch/i386/mach-generic/es7000.c b/arch/i386/mach-generic/es7000.c index 845cdd0b359..aa144d82334 100644 --- a/arch/i386/mach-generic/es7000.c +++ b/arch/i386/mach-generic/es7000.c @@ -4,6 +4,7 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> +#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c index bcd1bcfaa72..94b1fd9cbe3 100644 --- a/arch/i386/mach-generic/probe.c +++ b/arch/i386/mach-generic/probe.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/errno.h> #include <asm/fixmap.h> #include <asm/mpspec.h> #include <asm/apicdef.h> @@ -29,7 +30,24 @@ struct genapic *apic_probe[] __initdata = { NULL, }; -static int cmdline_apic; +static int cmdline_apic __initdata; +static int __init parse_apic(char *arg) +{ + int i; + + if (!arg) + return -EINVAL; + + for (i = 0; apic_probe[i]; i++) { + if (!strcmp(apic_probe[i]->name, arg)) { + genapic = apic_probe[i]; + cmdline_apic = 1; + return 0; + } + } + return -ENOENT; +} +early_param("apic", parse_apic); void __init generic_bigsmp_probe(void) { @@ -48,40 +66,20 @@ void __init generic_bigsmp_probe(void) } } -void __init generic_apic_probe(char *command_line) +void __init generic_apic_probe(void) { - char *s; - int i; - int changed = 0; - - s = strstr(command_line, "apic="); - if (s && (s == command_line || isspace(s[-1]))) { - char *p = strchr(s, ' '), old; - if (!p) - p = strchr(s, '\0'); - old = *p; - *p = 0; - for (i = 0; !changed && apic_probe[i]; i++) { - if (!strcmp(apic_probe[i]->name, s+5)) { - changed = 1; + if (!cmdline_apic) { + int i; + for (i = 0; apic_probe[i]; i++) { + if (apic_probe[i]->probe()) { genapic = apic_probe[i]; + break; } } - if (!changed) - printk(KERN_ERR "Unknown genapic `%s' specified.\n", s); - *p = old; - cmdline_apic = changed; - } - for (i = 0; !changed && apic_probe[i]; i++) { - if (apic_probe[i]->probe()) { - changed = 1; - genapic = apic_probe[i]; - } + /* Not visible without early console */ + if (!apic_probe[i]) + panic("Didn't find an APIC driver"); } - /* Not visible without early console */ - if (!changed) - panic("Didn't find an APIC driver"); - printk(KERN_INFO "Using APIC driver %s\n", genapic->name); } @@ -119,7 +117,9 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) return 0; } +#ifdef CONFIG_SMP int hard_smp_processor_id(void) { return genapic->get_apic_id(*(unsigned long *)(APIC_BASE+APIC_ID)); } +#endif diff --git a/arch/i386/mach-generic/summit.c b/arch/i386/mach-generic/summit.c index b73501ddd65..f7e5d66648d 100644 --- a/arch/i386/mach-generic/summit.c +++ b/arch/i386/mach-generic/summit.c @@ -4,6 +4,7 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> +#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> diff --git a/arch/i386/mach-voyager/voyager_thread.c b/arch/i386/mach-voyager/voyager_thread.c index 50f6de6ff64..f39887359e8 100644 --- a/arch/i386/mach-voyager/voyager_thread.c +++ b/arch/i386/mach-voyager/voyager_thread.c @@ -130,7 +130,6 @@ thread(void *unused) init_timer(&wakeup_timer); sigfillset(¤t->blocked); - current->signal->tty = NULL; printk(KERN_NOTICE "Voyager starting monitor thread\n"); diff --git a/arch/i386/mm/boot_ioremap.c b/arch/i386/mm/boot_ioremap.c index 5d44f4f5ff5..4de11f508c3 100644 --- a/arch/i386/mm/boot_ioremap.c +++ b/arch/i386/mm/boot_ioremap.c @@ -29,8 +29,11 @@ */ #define BOOT_PTE_PTRS (PTRS_PER_PTE*2) -#define boot_pte_index(address) \ - (((address) >> PAGE_SHIFT) & (BOOT_PTE_PTRS - 1)) + +static unsigned long boot_pte_index(unsigned long vaddr) +{ + return __pa(vaddr) >> PAGE_SHIFT; +} static inline boot_pte_t* boot_vaddr_to_pte(void *address) { diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index 7c392dc553b..51e3739dd22 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -117,7 +117,8 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); void *node_remap_end_vaddr[MAX_NUMNODES]; void *node_remap_alloc_vaddr[MAX_NUMNODES]; - +static unsigned long kva_start_pfn; +static unsigned long kva_pages; /* * FLAT - support for basic PC memory model with discontig enabled, essentially * a single node with all available processors in it with a flat @@ -156,21 +157,6 @@ static void __init find_max_pfn_node(int nid) BUG(); } -/* Find the owning node for a pfn. */ -int early_pfn_to_nid(unsigned long pfn) -{ - int nid; - - for_each_node(nid) { - if (node_end_pfn[nid] == 0) - break; - if (node_start_pfn[nid] <= pfn && node_end_pfn[nid] >= pfn) - return nid; - } - - return 0; -} - /* * Allocate memory for the pg_data_t for this node via a crude pre-bootmem * method. For node zero take this from the bottom of memory, for @@ -226,6 +212,8 @@ static unsigned long calculate_numa_remap_pages(void) unsigned long pfn; for_each_online_node(nid) { + unsigned old_end_pfn = node_end_pfn[nid]; + /* * The acpi/srat node info can show hot-add memroy zones * where memory could be added but not currently present. @@ -275,6 +263,7 @@ static unsigned long calculate_numa_remap_pages(void) node_end_pfn[nid] -= size; node_remap_start_pfn[nid] = node_end_pfn[nid]; + shrink_active_range(nid, old_end_pfn, node_end_pfn[nid]); } printk("Reserving total of %ld pages for numa KVA remap\n", reserve_pages); @@ -286,7 +275,6 @@ unsigned long __init setup_memory(void) { int nid; unsigned long system_start_pfn, system_max_low_pfn; - unsigned long reserve_pages; /* * When mapping a NUMA machine we allocate the node_mem_map arrays @@ -298,14 +286,23 @@ unsigned long __init setup_memory(void) find_max_pfn(); get_memcfg_numa(); - reserve_pages = calculate_numa_remap_pages(); + kva_pages = calculate_numa_remap_pages(); /* partially used pages are not usable - thus round upwards */ system_start_pfn = min_low_pfn = PFN_UP(init_pg_tables_end); - system_max_low_pfn = max_low_pfn = find_max_low_pfn() - reserve_pages; - printk("reserve_pages = %ld find_max_low_pfn() ~ %ld\n", - reserve_pages, max_low_pfn + reserve_pages); + kva_start_pfn = find_max_low_pfn() - kva_pages; + +#ifdef CONFIG_BLK_DEV_INITRD + /* Numa kva area is below the initrd */ + if (LOADER_TYPE && INITRD_START) + kva_start_pfn = PFN_DOWN(INITRD_START) - kva_pages; +#endif + kva_start_pfn -= kva_start_pfn & (PTRS_PER_PTE-1); + + system_max_low_pfn = max_low_pfn = find_max_low_pfn(); + printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n", + kva_start_pfn, max_low_pfn); printk("max_pfn = %ld\n", max_pfn); #ifdef CONFIG_HIGHMEM highstart_pfn = highend_pfn = max_pfn; @@ -313,6 +310,11 @@ unsigned long __init setup_memory(void) highstart_pfn = system_max_low_pfn; printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", pages_to_mb(highend_pfn - highstart_pfn)); + num_physpages = highend_pfn; + high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; +#else + num_physpages = system_max_low_pfn; + high_memory = (void *) __va(system_max_low_pfn * PAGE_SIZE - 1) + 1; #endif printk(KERN_NOTICE "%ldMB LOWMEM available.\n", pages_to_mb(system_max_low_pfn)); @@ -323,7 +325,7 @@ unsigned long __init setup_memory(void) (ulong) pfn_to_kaddr(max_low_pfn)); for_each_online_node(nid) { node_remap_start_vaddr[nid] = pfn_to_kaddr( - highstart_pfn + node_remap_offset[nid]); + kva_start_pfn + node_remap_offset[nid]); /* Init the node remap allocator */ node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] + (node_remap_size[nid] * PAGE_SIZE); @@ -338,7 +340,6 @@ unsigned long __init setup_memory(void) } printk("High memory starts at vaddr %08lx\n", (ulong) pfn_to_kaddr(highstart_pfn)); - vmalloc_earlyreserve = reserve_pages * PAGE_SIZE; for_each_online_node(nid) find_max_pfn_node(nid); @@ -348,48 +349,30 @@ unsigned long __init setup_memory(void) return max_low_pfn; } +void __init numa_kva_reserve(void) +{ + reserve_bootmem(PFN_PHYS(kva_start_pfn),PFN_PHYS(kva_pages)); +} + void __init zone_sizes_init(void) { int nid; - - - for_each_online_node(nid) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; - unsigned long *zholes_size; - unsigned int max_dma; - - unsigned long low = max_low_pfn; - unsigned long start = node_start_pfn[nid]; - unsigned long high = node_end_pfn[nid]; - - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - - if (node_has_online_mem(nid)){ - if (start > low) { -#ifdef CONFIG_HIGHMEM - BUG_ON(start > high); - zones_size[ZONE_HIGHMEM] = high - start; -#endif - } else { - if (low < max_dma) - zones_size[ZONE_DMA] = low; - else { - BUG_ON(max_dma > low); - BUG_ON(low > high); - zones_size[ZONE_DMA] = max_dma; - zones_size[ZONE_NORMAL] = low - max_dma; -#ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = high - low; -#endif - } - } + unsigned long max_zone_pfns[MAX_NR_ZONES] = { + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT, + max_low_pfn, + highend_pfn + }; + + /* If SRAT has not registered memory, register it now */ + if (find_max_pfn_with_active_regions() == 0) { + for_each_online_node(nid) { + if (node_has_online_mem(nid)) + add_active_range(nid, node_start_pfn[nid], + node_end_pfn[nid]); } - - zholes_size = get_zholes_size(nid); - - free_area_init_node(nid, NODE_DATA(nid), zones_size, start, - zholes_size); } + + free_area_init_nodes(max_zone_pfns); return; } @@ -409,7 +392,7 @@ void __init set_highmem_pages_init(int bad_ppro) zone_end_pfn = zone_start_pfn + zone->spanned_pages; printk("Initializing %s for node %d (%08lx:%08lx)\n", - zone->name, zone->zone_pgdat->node_id, + zone->name, zone_to_nid(zone), zone_start_pfn, zone_end_pfn); for (node_pfn = zone_start_pfn; node_pfn < zone_end_pfn; node_pfn++) { diff --git a/arch/i386/mm/extable.c b/arch/i386/mm/extable.c index de03c5430ab..0ce4f22a263 100644 --- a/arch/i386/mm/extable.c +++ b/arch/i386/mm/extable.c @@ -11,7 +11,7 @@ int fixup_exception(struct pt_regs *regs) const struct exception_table_entry *fixup; #ifdef CONFIG_PNPBIOS - if (unlikely((regs->xcs & ~15) == (GDT_ENTRY_PNPBIOS_BASE << 3))) + if (unlikely(SEGMENT_IS_PNP_CODE(regs->xcs))) { extern u32 pnp_bios_fault_eip, pnp_bios_fault_esp; extern u32 pnp_bios_is_utter_crap; diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index f7279468323..5e17a3f43b4 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -27,21 +27,24 @@ #include <asm/uaccess.h> #include <asm/desc.h> #include <asm/kdebug.h> +#include <asm/segment.h> extern void die(const char *,struct pt_regs *,long); -#ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); +static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); + int register_page_fault_notifier(struct notifier_block *nb) { vmalloc_sync_all(); return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); } +EXPORT_SYMBOL_GPL(register_page_fault_notifier); int unregister_page_fault_notifier(struct notifier_block *nb) { return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); } +EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); static inline int notify_page_fault(enum die_val val, const char *str, struct pt_regs *regs, long err, int trap, int sig) @@ -55,14 +58,6 @@ static inline int notify_page_fault(enum die_val val, const char *str, }; return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); } -#else -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) -{ - return NOTIFY_DONE; -} -#endif - /* * Unlock any spinlocks which will prevent us from getting the @@ -119,10 +114,10 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs, } /* The standard kernel/user address space limit. */ - *eip_limit = (seg & 3) ? USER_DS.seg : KERNEL_DS.seg; + *eip_limit = user_mode(regs) ? USER_DS.seg : KERNEL_DS.seg; /* By far the most common cases. */ - if (likely(seg == __USER_CS || seg == __KERNEL_CS)) + if (likely(SEGMENT_IS_FLAT_CODE(seg))) return eip; /* Check the segment exists, is within the current LDT/GDT size, @@ -436,11 +431,7 @@ good_area: write = 0; switch (error_code & 3) { default: /* 3: write, present */ -#ifdef TEST_VERIFY_AREA - if (regs->cs == KERNEL_CS) - printk("WP fault at %08lx\n", regs->eip); -#endif - /* fall through */ + /* fall through */ case 2: /* write, not present */ if (!(vma->vm_flags & VM_WRITE)) goto bad_area; diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c index b6eb4dcb877..ba44000b906 100644 --- a/arch/i386/mm/highmem.c +++ b/arch/i386/mm/highmem.c @@ -54,7 +54,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type) unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); - if (vaddr < FIXADDR_START) { // FIXME + if (vaddr >= PAGE_OFFSET && vaddr < (unsigned long)high_memory) { dec_preempt_count(); preempt_check_resched(); return; diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 89e8486aac3..4a5a914b343 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -435,16 +435,22 @@ u64 __supported_pte_mask __read_mostly = ~_PAGE_NX; * on Enable * off Disable */ -void __init noexec_setup(const char *str) +static int __init noexec_setup(char *str) { - if (!strncmp(str, "on",2) && cpu_has_nx) { - __supported_pte_mask |= _PAGE_NX; - disable_nx = 0; - } else if (!strncmp(str,"off",3)) { + if (!str || !strcmp(str, "on")) { + if (cpu_has_nx) { + __supported_pte_mask |= _PAGE_NX; + disable_nx = 0; + } + } else if (!strcmp(str,"off")) { disable_nx = 1; __supported_pte_mask &= ~_PAGE_NX; - } + } else + return -EINVAL; + + return 0; } +early_param("noexec", noexec_setup); int nx_enabled = 0; #ifdef CONFIG_X86_PAE @@ -552,18 +558,6 @@ static void __init test_wp_bit(void) } } -static void __init set_max_mapnr_init(void) -{ -#ifdef CONFIG_HIGHMEM - num_physpages = highend_pfn; -#else - num_physpages = max_low_pfn; -#endif -#ifdef CONFIG_FLATMEM - max_mapnr = num_physpages; -#endif -} - static struct kcore_list kcore_mem, kcore_vmalloc; void __init mem_init(void) @@ -590,14 +584,6 @@ void __init mem_init(void) } #endif - set_max_mapnr_init(); - -#ifdef CONFIG_HIGHMEM - high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; -#else - high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1; -#endif - /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem(); @@ -629,6 +615,48 @@ void __init mem_init(void) (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) ); +#if 1 /* double-sanity-check paranoia */ + printk("virtual kernel memory layout:\n" + " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" +#ifdef CONFIG_HIGHMEM + " pkmap : 0x%08lx - 0x%08lx (%4ld kB)\n" +#endif + " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n" + " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n" + " .init : 0x%08lx - 0x%08lx (%4ld kB)\n" + " .data : 0x%08lx - 0x%08lx (%4ld kB)\n" + " .text : 0x%08lx - 0x%08lx (%4ld kB)\n", + FIXADDR_START, FIXADDR_TOP, + (FIXADDR_TOP - FIXADDR_START) >> 10, + +#ifdef CONFIG_HIGHMEM + PKMAP_BASE, PKMAP_BASE+LAST_PKMAP*PAGE_SIZE, + (LAST_PKMAP*PAGE_SIZE) >> 10, +#endif + + VMALLOC_START, VMALLOC_END, + (VMALLOC_END - VMALLOC_START) >> 20, + + (unsigned long)__va(0), (unsigned long)high_memory, + ((unsigned long)high_memory - (unsigned long)__va(0)) >> 20, + + (unsigned long)&__init_begin, (unsigned long)&__init_end, + ((unsigned long)&__init_end - (unsigned long)&__init_begin) >> 10, + + (unsigned long)&_etext, (unsigned long)&_edata, + ((unsigned long)&_edata - (unsigned long)&_etext) >> 10, + + (unsigned long)&_text, (unsigned long)&_etext, + ((unsigned long)&_etext - (unsigned long)&_text) >> 10); + +#ifdef CONFIG_HIGHMEM + BUG_ON(PKMAP_BASE+LAST_PKMAP*PAGE_SIZE > FIXADDR_START); + BUG_ON(VMALLOC_END > PKMAP_BASE); +#endif + BUG_ON(VMALLOC_START > VMALLOC_END); + BUG_ON((unsigned long)high_memory > VMALLOC_START); +#endif /* double-sanity-check paranoia */ + #ifdef CONFIG_X86_PAE if (!cpu_has_pae) panic("cannot execute a PAE-enabled kernel on a PAE-less CPU!"); @@ -657,7 +685,7 @@ void __init mem_init(void) int arch_add_memory(int nid, u64 start, u64 size) { struct pglist_data *pgdata = &contig_page_data; - struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1; + struct zone *zone = pgdata->node_zones + ZONE_HIGHMEM; unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index bd98768d876..10126e3f817 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/pagemap.h> #include <linux/spinlock.h> +#include <linux/module.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -60,7 +61,9 @@ void show_mem(void) printk(KERN_INFO "%lu pages writeback\n", global_page_state(NR_WRITEBACK)); printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED)); - printk(KERN_INFO "%lu pages slab\n", global_page_state(NR_SLAB)); + printk(KERN_INFO "%lu pages slab\n", + global_page_state(NR_SLAB_RECLAIMABLE) + + global_page_state(NR_SLAB_UNRECLAIMABLE)); printk(KERN_INFO "%lu pages pagetables\n", global_page_state(NR_PAGETABLE)); } @@ -137,6 +140,12 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) __flush_tlb_one(vaddr); } +static int fixmaps; +#ifndef CONFIG_COMPAT_VDSO +unsigned long __FIXADDR_TOP = 0xfffff000; +EXPORT_SYMBOL(__FIXADDR_TOP); +#endif + void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags) { unsigned long address = __fix_to_virt(idx); @@ -146,6 +155,25 @@ void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags) return; } set_pte_pfn(address, phys >> PAGE_SHIFT, flags); + fixmaps++; +} + +/** + * reserve_top_address - reserves a hole in the top of kernel address space + * @reserve - size of hole to reserve + * + * Can be used to relocate the fixmap area and poke a hole in the top + * of kernel address space to make room for a hypervisor. + */ +void reserve_top_address(unsigned long reserve) +{ + BUG_ON(fixmaps > 0); +#ifdef CONFIG_COMPAT_VDSO + BUG_ON(reserve != 0); +#else + __FIXADDR_TOP = -reserve - PAGE_SIZE; + __VMALLOC_RESERVE += reserve; +#endif } pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 5f8dc8a21bd..3700eef7874 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -17,14 +17,15 @@ #include <asm/nmi.h> #include <asm/msr.h> #include <asm/apic.h> +#include <asm/kdebug.h> #include "op_counter.h" #include "op_x86_model.h" - + static struct op_x86_model_spec const * model; static struct op_msrs cpu_msrs[NR_CPUS]; static unsigned long saved_lvtpc[NR_CPUS]; - + static int nmi_start(void); static void nmi_stop(void); @@ -82,13 +83,24 @@ static void exit_driverfs(void) #define exit_driverfs() do { } while (0) #endif /* CONFIG_PM */ - -static int nmi_callback(struct pt_regs * regs, int cpu) +static int profile_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { - return model->check_ctrs(regs, &cpu_msrs[cpu]); + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + int cpu = smp_processor_id(); + + switch(val) { + case DIE_NMI: + if (model->check_ctrs(args->regs, &cpu_msrs[cpu])) + ret = NOTIFY_STOP; + break; + default: + break; + } + return ret; } - - + static void nmi_cpu_save_registers(struct op_msrs * msrs) { unsigned int const nr_ctrs = model->num_counters; @@ -98,15 +110,19 @@ static void nmi_cpu_save_registers(struct op_msrs * msrs) unsigned int i; for (i = 0; i < nr_ctrs; ++i) { - rdmsr(counters[i].addr, - counters[i].saved.low, - counters[i].saved.high); + if (counters[i].addr){ + rdmsr(counters[i].addr, + counters[i].saved.low, + counters[i].saved.high); + } } for (i = 0; i < nr_ctrls; ++i) { - rdmsr(controls[i].addr, - controls[i].saved.low, - controls[i].saved.high); + if (controls[i].addr){ + rdmsr(controls[i].addr, + controls[i].saved.low, + controls[i].saved.high); + } } } @@ -170,27 +186,29 @@ static void nmi_cpu_setup(void * dummy) apic_write(APIC_LVTPC, APIC_DM_NMI); } +static struct notifier_block profile_exceptions_nb = { + .notifier_call = profile_exceptions_notify, + .next = NULL, + .priority = 0 +}; static int nmi_setup(void) { + int err=0; + if (!allocate_msrs()) return -ENOMEM; - /* We walk a thin line between law and rape here. - * We need to be careful to install our NMI handler - * without actually triggering any NMIs as this will - * break the core code horrifically. - */ - if (reserve_lapic_nmi() < 0) { + if ((err = register_die_notifier(&profile_exceptions_nb))){ free_msrs(); - return -EBUSY; + return err; } + /* We need to serialize save and setup for HT because the subset * of msrs are distinct for save and setup operations */ on_each_cpu(nmi_save_registers, NULL, 0, 1); on_each_cpu(nmi_cpu_setup, NULL, 0, 1); - set_nmi_callback(nmi_callback); nmi_enabled = 1; return 0; } @@ -205,15 +223,19 @@ static void nmi_restore_registers(struct op_msrs * msrs) unsigned int i; for (i = 0; i < nr_ctrls; ++i) { - wrmsr(controls[i].addr, - controls[i].saved.low, - controls[i].saved.high); + if (controls[i].addr){ + wrmsr(controls[i].addr, + controls[i].saved.low, + controls[i].saved.high); + } } for (i = 0; i < nr_ctrs; ++i) { - wrmsr(counters[i].addr, - counters[i].saved.low, - counters[i].saved.high); + if (counters[i].addr){ + wrmsr(counters[i].addr, + counters[i].saved.low, + counters[i].saved.high); + } } } @@ -234,6 +256,7 @@ static void nmi_cpu_shutdown(void * dummy) apic_write(APIC_LVTPC, saved_lvtpc[cpu]); apic_write(APIC_LVTERR, v); nmi_restore_registers(msrs); + model->shutdown(msrs); } @@ -241,8 +264,7 @@ static void nmi_shutdown(void) { nmi_enabled = 0; on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1); - unset_nmi_callback(); - release_lapic_nmi(); + unregister_die_notifier(&profile_exceptions_nb); free_msrs(); } @@ -284,6 +306,14 @@ static int nmi_create_files(struct super_block * sb, struct dentry * root) struct dentry * dir; char buf[4]; + /* quick little hack to _not_ expose a counter if it is not + * available for use. This should protect userspace app. + * NOTE: assumes 1:1 mapping here (that counters are organized + * sequentially in their struct assignment). + */ + if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i))) + continue; + snprintf(buf, sizeof(buf), "%d", i); dir = oprofilefs_mkdir(sb, root, buf); oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled); diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c index 930a1127bb3..abf0ba52a63 100644 --- a/arch/i386/oprofile/nmi_timer_int.c +++ b/arch/i386/oprofile/nmi_timer_int.c @@ -17,34 +17,49 @@ #include <asm/nmi.h> #include <asm/apic.h> #include <asm/ptrace.h> +#include <asm/kdebug.h> -static int nmi_timer_callback(struct pt_regs * regs, int cpu) +static int profile_timer_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { - oprofile_add_sample(regs, 0); - return 1; + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + switch(val) { + case DIE_NMI: + oprofile_add_sample(args->regs, 0); + ret = NOTIFY_STOP; + break; + default: + break; + } + return ret; } +static struct notifier_block profile_timer_exceptions_nb = { + .notifier_call = profile_timer_exceptions_notify, + .next = NULL, + .priority = 0 +}; + static int timer_start(void) { - disable_timer_nmi_watchdog(); - set_nmi_callback(nmi_timer_callback); + if (register_die_notifier(&profile_timer_exceptions_nb)) + return 1; return 0; } static void timer_stop(void) { - enable_timer_nmi_watchdog(); - unset_nmi_callback(); + unregister_die_notifier(&profile_timer_exceptions_nb); synchronize_sched(); /* Allow already-started NMIs to complete. */ } int __init op_nmi_timer_init(struct oprofile_operations * ops) { - extern int nmi_active; - - if (nmi_active <= 0) + if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0)) return -ENODEV; ops->start = timer_start; diff --git a/arch/i386/oprofile/op_model_athlon.c b/arch/i386/oprofile/op_model_athlon.c index 693bdea4a52..3057a19e464 100644 --- a/arch/i386/oprofile/op_model_athlon.c +++ b/arch/i386/oprofile/op_model_athlon.c @@ -21,10 +21,12 @@ #define NUM_COUNTERS 4 #define NUM_CONTROLS 4 +#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0) #define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1);} while (0) #define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) +#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) #define CTRL_READ(l,h,msrs,c) do {rdmsr(msrs->controls[(c)].addr, (l), (h));} while (0) #define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0) #define CTRL_SET_ACTIVE(n) (n |= (1<<22)) @@ -40,15 +42,21 @@ static unsigned long reset_value[NUM_COUNTERS]; static void athlon_fill_in_addresses(struct op_msrs * const msrs) { - msrs->counters[0].addr = MSR_K7_PERFCTR0; - msrs->counters[1].addr = MSR_K7_PERFCTR1; - msrs->counters[2].addr = MSR_K7_PERFCTR2; - msrs->counters[3].addr = MSR_K7_PERFCTR3; - - msrs->controls[0].addr = MSR_K7_EVNTSEL0; - msrs->controls[1].addr = MSR_K7_EVNTSEL1; - msrs->controls[2].addr = MSR_K7_EVNTSEL2; - msrs->controls[3].addr = MSR_K7_EVNTSEL3; + int i; + + for (i=0; i < NUM_COUNTERS; i++) { + if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i)) + msrs->counters[i].addr = MSR_K7_PERFCTR0 + i; + else + msrs->counters[i].addr = 0; + } + + for (i=0; i < NUM_CONTROLS; i++) { + if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) + msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i; + else + msrs->controls[i].addr = 0; + } } @@ -59,19 +67,23 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs) /* clear all counters */ for (i = 0 ; i < NUM_CONTROLS; ++i) { + if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + continue; CTRL_READ(low, high, msrs, i); CTRL_CLEAR(low); CTRL_WRITE(low, high, msrs, i); } - + /* avoid a false detection of ctr overflows in NMI handler */ for (i = 0; i < NUM_COUNTERS; ++i) { + if (unlikely(!CTR_IS_RESERVED(msrs,i))) + continue; CTR_WRITE(1, msrs, i); } /* enable active counters */ for (i = 0; i < NUM_COUNTERS; ++i) { - if (counter_config[i].enabled) { + if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) { reset_value[i] = counter_config[i].count; CTR_WRITE(counter_config[i].count, msrs, i); @@ -98,6 +110,8 @@ static int athlon_check_ctrs(struct pt_regs * const regs, int i; for (i = 0 ; i < NUM_COUNTERS; ++i) { + if (!reset_value[i]) + continue; CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { oprofile_add_sample(regs, i); @@ -132,12 +146,27 @@ static void athlon_stop(struct op_msrs const * const msrs) /* Subtle: stop on all counters to avoid race with * setting our pm callback */ for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (!reset_value[i]) + continue; CTRL_READ(low, high, msrs, i); CTRL_SET_INACTIVE(low); CTRL_WRITE(low, high, msrs, i); } } +static void athlon_shutdown(struct op_msrs const * const msrs) +{ + int i; + + for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (CTR_IS_RESERVED(msrs,i)) + release_perfctr_nmi(MSR_K7_PERFCTR0 + i); + } + for (i = 0 ; i < NUM_CONTROLS ; ++i) { + if (CTRL_IS_RESERVED(msrs,i)) + release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); + } +} struct op_x86_model_spec const op_athlon_spec = { .num_counters = NUM_COUNTERS, @@ -146,5 +175,6 @@ struct op_x86_model_spec const op_athlon_spec = { .setup_ctrs = &athlon_setup_ctrs, .check_ctrs = &athlon_check_ctrs, .start = &athlon_start, - .stop = &athlon_stop + .stop = &athlon_stop, + .shutdown = &athlon_shutdown }; diff --git a/arch/i386/oprofile/op_model_p4.c b/arch/i386/oprofile/op_model_p4.c index 7c61d357b82..47925927b12 100644 --- a/arch/i386/oprofile/op_model_p4.c +++ b/arch/i386/oprofile/op_model_p4.c @@ -32,7 +32,7 @@ #define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2) static unsigned int num_counters = NUM_COUNTERS_NON_HT; - +static unsigned int num_controls = NUM_CONTROLS_NON_HT; /* this has to be checked dynamically since the hyper-threadedness of a chip is discovered at @@ -40,8 +40,10 @@ static unsigned int num_counters = NUM_COUNTERS_NON_HT; static inline void setup_num_counters(void) { #ifdef CONFIG_SMP - if (smp_num_siblings == 2) + if (smp_num_siblings == 2){ num_counters = NUM_COUNTERS_HT2; + num_controls = NUM_CONTROLS_HT2; + } #endif } @@ -97,15 +99,6 @@ static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = { #define NUM_UNUSED_CCCRS NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT -/* All cccr we don't use. */ -static int p4_unused_cccr[NUM_UNUSED_CCCRS] = { - MSR_P4_BPU_CCCR1, MSR_P4_BPU_CCCR3, - MSR_P4_MS_CCCR1, MSR_P4_MS_CCCR3, - MSR_P4_FLAME_CCCR1, MSR_P4_FLAME_CCCR3, - MSR_P4_IQ_CCCR0, MSR_P4_IQ_CCCR1, - MSR_P4_IQ_CCCR2, MSR_P4_IQ_CCCR3 -}; - /* p4 event codes in libop/op_event.h are indices into this table. */ static struct p4_event_binding p4_events[NUM_EVENTS] = { @@ -372,6 +365,8 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31)) #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31))) +#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) +#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l,h,i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h));} while (0) #define CTR_WRITE(l,i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1);} while (0) #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000)) @@ -401,29 +396,34 @@ static unsigned long reset_value[NUM_COUNTERS_NON_HT]; static void p4_fill_in_addresses(struct op_msrs * const msrs) { unsigned int i; - unsigned int addr, stag; + unsigned int addr, cccraddr, stag; setup_num_counters(); stag = get_stagger(); - /* the counter registers we pay attention to */ + /* initialize some registers */ for (i = 0; i < num_counters; ++i) { - msrs->counters[i].addr = - p4_counters[VIRT_CTR(stag, i)].counter_address; + msrs->counters[i].addr = 0; } - - /* FIXME: bad feeling, we don't save the 10 counters we don't use. */ - - /* 18 CCCR registers */ - for (i = 0, addr = MSR_P4_BPU_CCCR0 + stag; - addr <= MSR_P4_IQ_CCCR5; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + for (i = 0; i < num_controls; ++i) { + msrs->controls[i].addr = 0; } + /* the counter & cccr registers we pay attention to */ + for (i = 0; i < num_counters; ++i) { + addr = p4_counters[VIRT_CTR(stag, i)].counter_address; + cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address; + if (reserve_perfctr_nmi(addr)){ + msrs->counters[i].addr = addr; + msrs->controls[i].addr = cccraddr; + } + } + /* 43 ESCR registers in three or four discontiguous group */ for (addr = MSR_P4_BSU_ESCR0 + stag; addr < MSR_P4_IQ_ESCR0; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + if (reserve_evntsel_nmi(addr)) + msrs->controls[i].addr = addr; } /* no IQ_ESCR0/1 on some models, we save a seconde time BSU_ESCR0/1 @@ -431,47 +431,57 @@ static void p4_fill_in_addresses(struct op_msrs * const msrs) if (boot_cpu_data.x86_model >= 0x3) { for (addr = MSR_P4_BSU_ESCR0 + stag; addr <= MSR_P4_BSU_ESCR1; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + if (reserve_evntsel_nmi(addr)) + msrs->controls[i].addr = addr; } } else { for (addr = MSR_P4_IQ_ESCR0 + stag; addr <= MSR_P4_IQ_ESCR1; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + if (reserve_evntsel_nmi(addr)) + msrs->controls[i].addr = addr; } } for (addr = MSR_P4_RAT_ESCR0 + stag; addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + if (reserve_evntsel_nmi(addr)) + msrs->controls[i].addr = addr; } for (addr = MSR_P4_MS_ESCR0 + stag; addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + if (reserve_evntsel_nmi(addr)) + msrs->controls[i].addr = addr; } for (addr = MSR_P4_IX_ESCR0 + stag; addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) { - msrs->controls[i].addr = addr; + if (reserve_evntsel_nmi(addr)) + msrs->controls[i].addr = addr; } /* there are 2 remaining non-contiguously located ESCRs */ if (num_counters == NUM_COUNTERS_NON_HT) { /* standard non-HT CPUs handle both remaining ESCRs*/ - msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; - msrs->controls[i++].addr = MSR_P4_CRU_ESCR4; + if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5)) + msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; + if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4)) + msrs->controls[i++].addr = MSR_P4_CRU_ESCR4; } else if (stag == 0) { /* HT CPUs give the first remainder to the even thread, as the 32nd control register */ - msrs->controls[i++].addr = MSR_P4_CRU_ESCR4; + if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4)) + msrs->controls[i++].addr = MSR_P4_CRU_ESCR4; } else { /* and two copies of the second to the odd thread, for the 22st and 23nd control registers */ - msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; - msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; + if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5)) { + msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; + msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; + } } } @@ -544,7 +554,6 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs) { unsigned int i; unsigned int low, high; - unsigned int addr; unsigned int stag; stag = get_stagger(); @@ -557,59 +566,24 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs) /* clear the cccrs we will use */ for (i = 0 ; i < num_counters ; i++) { + if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + continue; rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high); CCCR_CLEAR(low); CCCR_SET_REQUIRED_BITS(low); wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high); } - /* clear cccrs outside our concern */ - for (i = stag ; i < NUM_UNUSED_CCCRS ; i += addr_increment()) { - rdmsr(p4_unused_cccr[i], low, high); - CCCR_CLEAR(low); - CCCR_SET_REQUIRED_BITS(low); - wrmsr(p4_unused_cccr[i], low, high); - } - /* clear all escrs (including those outside our concern) */ - for (addr = MSR_P4_BSU_ESCR0 + stag; - addr < MSR_P4_IQ_ESCR0; addr += addr_increment()) { - wrmsr(addr, 0, 0); - } - - /* On older models clear also MSR_P4_IQ_ESCR0/1 */ - if (boot_cpu_data.x86_model < 0x3) { - wrmsr(MSR_P4_IQ_ESCR0, 0, 0); - wrmsr(MSR_P4_IQ_ESCR1, 0, 0); - } - - for (addr = MSR_P4_RAT_ESCR0 + stag; - addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) { - wrmsr(addr, 0, 0); - } - - for (addr = MSR_P4_MS_ESCR0 + stag; - addr <= MSR_P4_TC_ESCR1; addr += addr_increment()){ - wrmsr(addr, 0, 0); - } - - for (addr = MSR_P4_IX_ESCR0 + stag; - addr <= MSR_P4_CRU_ESCR3; addr += addr_increment()){ - wrmsr(addr, 0, 0); + for (i = num_counters; i < num_controls; i++) { + if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + continue; + wrmsr(msrs->controls[i].addr, 0, 0); } - if (num_counters == NUM_COUNTERS_NON_HT) { - wrmsr(MSR_P4_CRU_ESCR4, 0, 0); - wrmsr(MSR_P4_CRU_ESCR5, 0, 0); - } else if (stag == 0) { - wrmsr(MSR_P4_CRU_ESCR4, 0, 0); - } else { - wrmsr(MSR_P4_CRU_ESCR5, 0, 0); - } - /* setup all counters */ for (i = 0 ; i < num_counters ; ++i) { - if (counter_config[i].enabled) { + if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs,i))) { reset_value[i] = counter_config[i].count; pmc_setup_one_p4_counter(i); CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i)); @@ -696,12 +670,32 @@ static void p4_stop(struct op_msrs const * const msrs) stag = get_stagger(); for (i = 0; i < num_counters; ++i) { + if (!reset_value[i]) + continue; CCCR_READ(low, high, VIRT_CTR(stag, i)); CCCR_SET_DISABLE(low); CCCR_WRITE(low, high, VIRT_CTR(stag, i)); } } +static void p4_shutdown(struct op_msrs const * const msrs) +{ + int i; + + for (i = 0 ; i < num_counters ; ++i) { + if (CTR_IS_RESERVED(msrs,i)) + release_perfctr_nmi(msrs->counters[i].addr); + } + /* some of the control registers are specially reserved in + * conjunction with the counter registers (hence the starting offset). + * This saves a few bits. + */ + for (i = num_counters ; i < num_controls ; ++i) { + if (CTRL_IS_RESERVED(msrs,i)) + release_evntsel_nmi(msrs->controls[i].addr); + } +} + #ifdef CONFIG_SMP struct op_x86_model_spec const op_p4_ht2_spec = { @@ -711,7 +705,8 @@ struct op_x86_model_spec const op_p4_ht2_spec = { .setup_ctrs = &p4_setup_ctrs, .check_ctrs = &p4_check_ctrs, .start = &p4_start, - .stop = &p4_stop + .stop = &p4_stop, + .shutdown = &p4_shutdown }; #endif @@ -722,5 +717,6 @@ struct op_x86_model_spec const op_p4_spec = { .setup_ctrs = &p4_setup_ctrs, .check_ctrs = &p4_check_ctrs, .start = &p4_start, - .stop = &p4_stop + .stop = &p4_stop, + .shutdown = &p4_shutdown }; diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c index 5c3ab4b027a..f88e05ba8eb 100644 --- a/arch/i386/oprofile/op_model_ppro.c +++ b/arch/i386/oprofile/op_model_ppro.c @@ -22,10 +22,12 @@ #define NUM_COUNTERS 2 #define NUM_CONTROLS 2 +#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0) #define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0) #define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) +#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) #define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0) #define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0) #define CTRL_SET_ACTIVE(n) (n |= (1<<22)) @@ -41,11 +43,21 @@ static unsigned long reset_value[NUM_COUNTERS]; static void ppro_fill_in_addresses(struct op_msrs * const msrs) { - msrs->counters[0].addr = MSR_P6_PERFCTR0; - msrs->counters[1].addr = MSR_P6_PERFCTR1; + int i; + + for (i=0; i < NUM_COUNTERS; i++) { + if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i)) + msrs->counters[i].addr = MSR_P6_PERFCTR0 + i; + else + msrs->counters[i].addr = 0; + } - msrs->controls[0].addr = MSR_P6_EVNTSEL0; - msrs->controls[1].addr = MSR_P6_EVNTSEL1; + for (i=0; i < NUM_CONTROLS; i++) { + if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) + msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i; + else + msrs->controls[i].addr = 0; + } } @@ -56,6 +68,8 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) /* clear all counters */ for (i = 0 ; i < NUM_CONTROLS; ++i) { + if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + continue; CTRL_READ(low, high, msrs, i); CTRL_CLEAR(low); CTRL_WRITE(low, high, msrs, i); @@ -63,12 +77,14 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) /* avoid a false detection of ctr overflows in NMI handler */ for (i = 0; i < NUM_COUNTERS; ++i) { + if (unlikely(!CTR_IS_RESERVED(msrs,i))) + continue; CTR_WRITE(1, msrs, i); } /* enable active counters */ for (i = 0; i < NUM_COUNTERS; ++i) { - if (counter_config[i].enabled) { + if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) { reset_value[i] = counter_config[i].count; CTR_WRITE(counter_config[i].count, msrs, i); @@ -81,6 +97,8 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) CTRL_SET_UM(low, counter_config[i].unit_mask); CTRL_SET_EVENT(low, counter_config[i].event); CTRL_WRITE(low, high, msrs, i); + } else { + reset_value[i] = 0; } } } @@ -93,6 +111,8 @@ static int ppro_check_ctrs(struct pt_regs * const regs, int i; for (i = 0 ; i < NUM_COUNTERS; ++i) { + if (!reset_value[i]) + continue; CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { oprofile_add_sample(regs, i); @@ -118,18 +138,38 @@ static int ppro_check_ctrs(struct pt_regs * const regs, static void ppro_start(struct op_msrs const * const msrs) { unsigned int low,high; - CTRL_READ(low, high, msrs, 0); - CTRL_SET_ACTIVE(low); - CTRL_WRITE(low, high, msrs, 0); + + if (reset_value[0]) { + CTRL_READ(low, high, msrs, 0); + CTRL_SET_ACTIVE(low); + CTRL_WRITE(low, high, msrs, 0); + } } static void ppro_stop(struct op_msrs const * const msrs) { unsigned int low,high; - CTRL_READ(low, high, msrs, 0); - CTRL_SET_INACTIVE(low); - CTRL_WRITE(low, high, msrs, 0); + + if (reset_value[0]) { + CTRL_READ(low, high, msrs, 0); + CTRL_SET_INACTIVE(low); + CTRL_WRITE(low, high, msrs, 0); + } +} + +static void ppro_shutdown(struct op_msrs const * const msrs) +{ + int i; + + for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (CTR_IS_RESERVED(msrs,i)) + release_perfctr_nmi(MSR_P6_PERFCTR0 + i); + } + for (i = 0 ; i < NUM_CONTROLS ; ++i) { + if (CTRL_IS_RESERVED(msrs,i)) + release_evntsel_nmi(MSR_P6_EVNTSEL0 + i); + } } @@ -140,5 +180,6 @@ struct op_x86_model_spec const op_ppro_spec = { .setup_ctrs = &ppro_setup_ctrs, .check_ctrs = &ppro_check_ctrs, .start = &ppro_start, - .stop = &ppro_stop + .stop = &ppro_stop, + .shutdown = &ppro_shutdown }; diff --git a/arch/i386/oprofile/op_x86_model.h b/arch/i386/oprofile/op_x86_model.h index 123b7e90a9e..abb1aa95b97 100644 --- a/arch/i386/oprofile/op_x86_model.h +++ b/arch/i386/oprofile/op_x86_model.h @@ -40,6 +40,7 @@ struct op_x86_model_spec { struct op_msrs const * const msrs); void (*start)(struct op_msrs const * const msrs); void (*stop)(struct op_msrs const * const msrs); + void (*shutdown)(struct op_msrs const * const msrs); }; extern struct op_x86_model_spec const op_ppro_spec; diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 62ad75c57e6..1594d2f55c8 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -11,4 +11,4 @@ pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o -obj-y += $(pci-y) common.o +obj-y += $(pci-y) common.o early.o diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 0a362e3aeac..68bce194e68 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -242,6 +242,10 @@ char * __devinit pcibios_setup(char *str) acpi_noirq_set(); return NULL; } + else if (!strcmp(str, "noearly")) { + pci_probe |= PCI_PROBE_NOEARLY; + return NULL; + } #ifndef CONFIG_X86_VISWS else if (!strcmp(str, "usepirqmask")) { pci_probe |= PCI_USE_PIRQ_MASK; diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c index 5d81fb51037..5acf0b4743c 100644 --- a/arch/i386/pci/direct.c +++ b/arch/i386/pci/direct.c @@ -254,7 +254,16 @@ static int __init pci_check_type2(void) return works; } -void __init pci_direct_init(void) +void __init pci_direct_init(int type) +{ + printk(KERN_INFO "PCI: Using configuration type %d\n", type); + if (type == 1) + raw_pci_ops = &pci_direct_conf1; + else + raw_pci_ops = &pci_direct_conf2; +} + +int __init pci_direct_probe(void) { struct resource *region, *region2; @@ -264,19 +273,16 @@ void __init pci_direct_init(void) if (!region) goto type2; - if (pci_check_type1()) { - printk(KERN_INFO "PCI: Using configuration type 1\n"); - raw_pci_ops = &pci_direct_conf1; - return; - } + if (pci_check_type1()) + return 1; release_resource(region); type2: if ((pci_probe & PCI_PROBE_CONF2) == 0) - return; + return 0; region = request_region(0xCF8, 4, "PCI conf2"); if (!region) - return; + return 0; region2 = request_region(0xC000, 0x1000, "PCI conf2"); if (!region2) goto fail2; @@ -284,10 +290,11 @@ void __init pci_direct_init(void) if (pci_check_type2()) { printk(KERN_INFO "PCI: Using configuration type 2\n"); raw_pci_ops = &pci_direct_conf2; - return; + return 2; } release_resource(region2); fail2: release_resource(region); + return 0; } diff --git a/arch/i386/pci/early.c b/arch/i386/pci/early.c new file mode 100644 index 00000000000..713d6c866ca --- /dev/null +++ b/arch/i386/pci/early.c @@ -0,0 +1,52 @@ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/pci-direct.h> +#include <asm/io.h> +#include "pci.h" + +/* Direct PCI access. This is used for PCI accesses in early boot before + the PCI subsystem works. */ + +#define PDprintk(x...) + +u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) +{ + u32 v; + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + v = inl(0xcfc); + if (v != 0xffffffff) + PDprintk("%x reading 4 from %x: %x\n", slot, offset, v); + return v; +} + +u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) +{ + u8 v; + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + v = inb(0xcfc + (offset&3)); + PDprintk("%x reading 1 from %x: %x\n", slot, offset, v); + return v; +} + +u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) +{ + u16 v; + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + v = inw(0xcfc + (offset&2)); + PDprintk("%x reading 2 from %x: %x\n", slot, offset, v); + return v; +} + +void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, + u32 val) +{ + PDprintk("%x writing to %x: %x\n", slot, offset, val); + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + outl(val, 0xcfc); +} + +int early_pci_allowed(void) +{ + return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == + PCI_PROBE_CONF1; +} diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c index 51087a9d917..d028e1b05c3 100644 --- a/arch/i386/pci/init.c +++ b/arch/i386/pci/init.c @@ -6,8 +6,13 @@ in the right sequence from here. */ static __init int pci_access_init(void) { + int type = 0; + +#ifdef CONFIG_PCI_DIRECT + type = pci_direct_probe(); +#endif #ifdef CONFIG_PCI_MMCONFIG - pci_mmcfg_init(); + pci_mmcfg_init(type); #endif if (raw_pci_ops) return 0; @@ -21,7 +26,7 @@ static __init int pci_access_init(void) * fails. */ #ifdef CONFIG_PCI_DIRECT - pci_direct_init(); + pci_direct_init(type); #endif return 0; } diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 972180f738d..05be8db58a8 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -151,6 +151,38 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; + +static __init void pci_mmcfg_insert_resources(void) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + num_buses = pci_mmcfg_config[i].end_bus_number - + pci_mmcfg_config[i].start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + pci_mmcfg_config[i].pci_segment_group_number); + res->start = pci_mmcfg_config[i].base_address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } +} + /* K8 systems have some devices (typically in the builtin northbridge) that are only accessible using type1 Normally this can be expressed in the MCFG by not listing them @@ -187,7 +219,9 @@ static __init void unreachable_devices(void) } } -void __init pci_mmcfg_init(void) + + +void __init pci_mmcfg_init(int type) { if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; @@ -198,7 +232,9 @@ void __init pci_mmcfg_init(void) (pci_mmcfg_config[0].base_address == 0)) return; - if (!e820_all_mapped(pci_mmcfg_config[0].base_address, + /* Only do this check when type 1 works. If it doesn't work + assume we run on a Mac and always use MCFG */ + if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address, pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, E820_RESERVED)) { printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", @@ -212,4 +248,5 @@ void __init pci_mmcfg_init(void) pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; unreachable_devices(); + pci_mmcfg_insert_resources(); } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index bf4e7933538..1814f74569c 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -17,6 +17,7 @@ #define PCI_PROBE_CONF2 0x0004 #define PCI_PROBE_MMCONF 0x0008 #define PCI_PROBE_MASK 0x000f +#define PCI_PROBE_NOEARLY 0x0010 #define PCI_NO_SORT 0x0100 #define PCI_BIOS_SORT 0x0200 @@ -81,7 +82,9 @@ extern int pci_conf1_write(unsigned int seg, unsigned int bus, extern int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value); -extern void pci_direct_init(void); +extern int pci_direct_probe(void); +extern void pci_direct_init(int type); extern void pci_pcbios_init(void); -extern void pci_mmcfg_init(void); +extern void pci_mmcfg_init(int type); extern void pcibios_sort(void); + diff --git a/arch/i386/power/swsusp.S b/arch/i386/power/swsusp.S index c893b897217..8a2b50a0aaa 100644 --- a/arch/i386/power/swsusp.S +++ b/arch/i386/power/swsusp.S @@ -32,7 +32,7 @@ ENTRY(swsusp_arch_resume) movl $swsusp_pg_dir-__PAGE_OFFSET, %ecx movl %ecx, %cr3 - movl pagedir_nosave, %edx + movl restore_pblist, %edx .p2align 4,,7 copy_loop: diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index db274da7dba..0b7f701d5cf 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -66,15 +66,6 @@ config IA64_UNCACHED_ALLOCATOR bool select GENERIC_ALLOCATOR -config DMA_IS_DMA32 - bool - default y - -config DMA_IS_NORMAL - bool - depends on IA64_SGI_SN2 - default y - config AUDIT_ARCH bool default y @@ -365,6 +356,9 @@ config NODES_SHIFT MAX_NUMNODES will be 2^(This value). If in doubt, use the default. +config ARCH_POPULATES_NODE_MAP + def_bool y + # VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. # VIRTUAL_MEM_MAP has been retained for historical reasons. config VIRTUAL_MEM_MAP @@ -429,6 +423,14 @@ config IA64_PALINFO config SGI_SN def_bool y if (IA64_SGI_SN2 || IA64_GENERIC) +config IA64_ESI + bool "ESI (Extensible SAL Interface) support" + help + If you say Y here, support is built into the kernel to + make ESI calls. ESI calls are used to support vendor-specific + firmware extensions, such as the ability to inject memory-errors + for test-purposes. If you're unsure, say N. + source "drivers/sn/Kconfig" source "drivers/firmware/Kconfig" diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 6aa3c51619c..bddbd22706e 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -1942,7 +1942,7 @@ struct sysctl32 { unsigned int __unused[4]; }; -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SYSCTL_SYSCALL asmlinkage long sys32_sysctl (struct sysctl32 __user *args) { diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index ad8215a3c58..31497496eb4 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -32,6 +32,11 @@ obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o obj-$(CONFIG_AUDIT) += audit.o mca_recovery-y += mca_drv.o mca_drv_asm.o +obj-$(CONFIG_IA64_ESI) += esi.o +ifneq ($(CONFIG_IA64_ESI),) +obj-y += esi_stub.o # must be in kernel proper +endif + # The gate DSO image is built using a special linker script. targets += gate.so gate-syms.o diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 0176556aeec..32c3abededc 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -771,16 +771,19 @@ int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) { #ifdef CONFIG_ACPI_NUMA int pxm_id; + int nid; pxm_id = acpi_get_pxm(handle); - /* - * Assuming that the container driver would have set the proximity - * domain and would have initialized pxm_to_node(pxm_id) && pxm_flag + * We don't have cpu-only-node hotadd. But if the system equips + * SRAT table, pxm is already found and node is ready. + * So, just pxm_to_nid(pxm) is OK. + * This code here is for the system which doesn't have full SRAT + * table for possible cpus. */ - node_cpuid[cpu].nid = (pxm_id < 0) ? 0 : pxm_to_node(pxm_id); - + nid = acpi_map_pxm_to_node(pxm_id); node_cpuid[cpu].phys_id = physid; + node_cpuid[cpu].nid = nid; #endif return (0); } diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index fef06571be9..12701cf32d9 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1605,8 +1605,8 @@ sys_call_table: data8 sys_ni_syscall // 1295 reserved for ppoll data8 sys_unshare data8 sys_splice - data8 sys_ni_syscall // reserved for set_robust_list - data8 sys_ni_syscall // reserved for get_robust_list + data8 sys_set_robust_list + data8 sys_get_robust_list data8 sys_sync_file_range // 1300 data8 sys_tee data8 sys_vmsplice diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c new file mode 100644 index 00000000000..ebf4e988e78 --- /dev/null +++ b/arch/ia64/kernel/esi.c @@ -0,0 +1,205 @@ +/* + * Extensible SAL Interface (ESI) support routines. + * + * Copyright (C) 2006 Hewlett-Packard Co + * Alex Williamson <alex.williamson@hp.com> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <asm/esi.h> +#include <asm/sal.h> + +MODULE_AUTHOR("Alex Williamson <alex.williamson@hp.com>"); +MODULE_DESCRIPTION("Extensible SAL Interface (ESI) support"); +MODULE_LICENSE("GPL"); + +#define MODULE_NAME "esi" + +#define ESI_TABLE_GUID \ + EFI_GUID(0x43EA58DC, 0xCF28, 0x4b06, 0xB3, \ + 0x91, 0xB7, 0x50, 0x59, 0x34, 0x2B, 0xD4) + +enum esi_systab_entry_type { + ESI_DESC_ENTRY_POINT = 0 +}; + +/* + * Entry type: Size: + * 0 48 + */ +#define ESI_DESC_SIZE(type) "\060"[(unsigned) (type)] + +typedef struct ia64_esi_desc_entry_point { + u8 type; + u8 reserved1[15]; + u64 esi_proc; + u64 gp; + efi_guid_t guid; +} ia64_esi_desc_entry_point_t; + +struct pdesc { + void *addr; + void *gp; +}; + +static struct ia64_sal_systab *esi_systab; + +static int __init esi_init (void) +{ + efi_config_table_t *config_tables; + struct ia64_sal_systab *systab; + unsigned long esi = 0; + char *p; + int i; + + config_tables = __va(efi.systab->tables); + + for (i = 0; i < (int) efi.systab->nr_tables; ++i) { + if (efi_guidcmp(config_tables[i].guid, ESI_TABLE_GUID) == 0) { + esi = config_tables[i].table; + break; + } + } + + if (!esi) + return -ENODEV;; + + systab = __va(esi); + + if (strncmp(systab->signature, "ESIT", 4) != 0) { + printk(KERN_ERR "bad signature in ESI system table!"); + return -ENODEV; + } + + p = (char *) (systab + 1); + for (i = 0; i < systab->entry_count; i++) { + /* + * The first byte of each entry type contains the type + * descriptor. + */ + switch (*p) { + case ESI_DESC_ENTRY_POINT: + break; + default: + printk(KERN_WARNING "Unkown table type %d found in " + "ESI table, ignoring rest of table\n", *p); + return -ENODEV; + } + + p += ESI_DESC_SIZE(*p); + } + + esi_systab = systab; + return 0; +} + + +int ia64_esi_call (efi_guid_t guid, struct ia64_sal_retval *isrvp, + enum esi_proc_type proc_type, u64 func, + u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, + u64 arg7) +{ + struct ia64_fpreg fr[6]; + unsigned long flags = 0; + int i; + char *p; + + if (!esi_systab) + return -1; + + p = (char *) (esi_systab + 1); + for (i = 0; i < esi_systab->entry_count; i++) { + if (*p == ESI_DESC_ENTRY_POINT) { + ia64_esi_desc_entry_point_t *esi = (void *)p; + if (!efi_guidcmp(guid, esi->guid)) { + ia64_sal_handler esi_proc; + struct pdesc pdesc; + + pdesc.addr = __va(esi->esi_proc); + pdesc.gp = __va(esi->gp); + + esi_proc = (ia64_sal_handler) &pdesc; + + ia64_save_scratch_fpregs(fr); + if (proc_type == ESI_PROC_SERIALIZED) + spin_lock_irqsave(&sal_lock, flags); + else if (proc_type == ESI_PROC_MP_SAFE) + local_irq_save(flags); + else + preempt_disable(); + *isrvp = (*esi_proc)(func, arg1, arg2, arg3, + arg4, arg5, arg6, arg7); + if (proc_type == ESI_PROC_SERIALIZED) + spin_unlock_irqrestore(&sal_lock, + flags); + else if (proc_type == ESI_PROC_MP_SAFE) + local_irq_restore(flags); + else + preempt_enable(); + ia64_load_scratch_fpregs(fr); + return 0; + } + } + p += ESI_DESC_SIZE(*p); + } + return -1; +} +EXPORT_SYMBOL_GPL(ia64_esi_call); + +int ia64_esi_call_phys (efi_guid_t guid, struct ia64_sal_retval *isrvp, + u64 func, u64 arg1, u64 arg2, u64 arg3, u64 arg4, + u64 arg5, u64 arg6, u64 arg7) +{ + struct ia64_fpreg fr[6]; + unsigned long flags; + u64 esi_params[8]; + char *p; + int i; + + if (!esi_systab) + return -1; + + p = (char *) (esi_systab + 1); + for (i = 0; i < esi_systab->entry_count; i++) { + if (*p == ESI_DESC_ENTRY_POINT) { + ia64_esi_desc_entry_point_t *esi = (void *)p; + if (!efi_guidcmp(guid, esi->guid)) { + ia64_sal_handler esi_proc; + struct pdesc pdesc; + + pdesc.addr = (void *)esi->esi_proc; + pdesc.gp = (void *)esi->gp; + + esi_proc = (ia64_sal_handler) &pdesc; + + esi_params[0] = func; + esi_params[1] = arg1; + esi_params[2] = arg2; + esi_params[3] = arg3; + esi_params[4] = arg4; + esi_params[5] = arg5; + esi_params[6] = arg6; + esi_params[7] = arg7; + ia64_save_scratch_fpregs(fr); + spin_lock_irqsave(&sal_lock, flags); + *isrvp = esi_call_phys(esi_proc, esi_params); + spin_unlock_irqrestore(&sal_lock, flags); + ia64_load_scratch_fpregs(fr); + return 0; + } + } + p += ESI_DESC_SIZE(*p); + } + return -1; +} +EXPORT_SYMBOL_GPL(ia64_esi_call_phys); + +static void __exit esi_exit (void) +{ +} + +module_init(esi_init); +module_exit(esi_exit); /* makes module removable... */ diff --git a/arch/ia64/kernel/esi_stub.S b/arch/ia64/kernel/esi_stub.S new file mode 100644 index 00000000000..6b3d6c1f99b --- /dev/null +++ b/arch/ia64/kernel/esi_stub.S @@ -0,0 +1,96 @@ +/* + * ESI call stub. + * + * Copyright (C) 2005 Hewlett-Packard Co + * Alex Williamson <alex.williamson@hp.com> + * + * Based on EFI call stub by David Mosberger. The stub is virtually + * identical to the one for EFI phys-mode calls, except that ESI + * calls may have up to 8 arguments, so they get passed to this routine + * through memory. + * + * This stub allows us to make ESI calls in physical mode with interrupts + * turned off. ESI calls may not support calling from virtual mode. + * + * Google for "Extensible SAL specification" for a document describing the + * ESI standard. + */ + +/* + * PSR settings as per SAL spec (Chapter 8 in the "IA-64 System + * Abstraction Layer Specification", revision 2.6e). Note that + * psr.dfl and psr.dfh MUST be cleared, despite what this manual says. + * Otherwise, SAL dies whenever it's trying to do an IA-32 BIOS call + * (the br.ia instruction fails unless psr.dfl and psr.dfh are + * cleared). Fortunately, SAL promises not to touch the floating + * point regs, so at least we don't have to save f2-f127. + */ +#define PSR_BITS_TO_CLEAR \ + (IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_RT | \ + IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED | \ + IA64_PSR_DFL | IA64_PSR_DFH) + +#define PSR_BITS_TO_SET \ + (IA64_PSR_BN) + +#include <asm/processor.h> +#include <asm/asmmacro.h> + +/* + * Inputs: + * in0 = address of function descriptor of ESI routine to call + * in1 = address of array of ESI parameters + * + * Outputs: + * r8 = result returned by called function + */ +GLOBAL_ENTRY(esi_call_phys) + .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2) + alloc loc1=ar.pfs,2,7,8,0 + ld8 r2=[in0],8 // load ESI function's entry point + mov loc0=rp + .body + ;; + ld8 out0=[in1],8 // ESI params loaded from array + ;; // passing all as inputs doesn't work + ld8 out1=[in1],8 + ;; + ld8 out2=[in1],8 + ;; + ld8 out3=[in1],8 + ;; + ld8 out4=[in1],8 + ;; + ld8 out5=[in1],8 + ;; + ld8 out6=[in1],8 + ;; + ld8 out7=[in1] + mov loc2=gp // save global pointer + mov loc4=ar.rsc // save RSE configuration + mov ar.rsc=0 // put RSE in enforced lazy, LE mode + ;; + ld8 gp=[in0] // load ESI function's global pointer + movl r16=PSR_BITS_TO_CLEAR + mov loc3=psr // save processor status word + movl r17=PSR_BITS_TO_SET + ;; + or loc3=loc3,r17 + mov b6=r2 + ;; + andcm r16=loc3,r16 // get psr with IT, DT, and RT bits cleared + br.call.sptk.many rp=ia64_switch_mode_phys +.ret0: mov loc5=r19 // old ar.bsp + mov loc6=r20 // old sp + br.call.sptk.many rp=b6 // call the ESI function +.ret1: mov ar.rsc=0 // put RSE in enforced lazy, LE mode + mov r16=loc3 // save virtual mode psr + mov r19=loc5 // save virtual mode bspstore + mov r20=loc6 // save virtual mode sp + br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode +.ret2: mov ar.rsc=loc4 // restore RSE configuration + mov ar.pfs=loc1 + mov rp=loc0 + mov gp=loc2 + br.ret.sptk.many rp +END(esi_call_phys) diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c index 3ead20fb6f4..879c1817bd1 100644 --- a/arch/ia64/kernel/ia64_ksyms.c +++ b/arch/ia64/kernel/ia64_ksyms.c @@ -105,5 +105,9 @@ EXPORT_SYMBOL(ia64_spinlock_contention); # endif #endif +#if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE) +extern void esi_call_phys (void); +EXPORT_SYMBOL_GPL(esi_call_phys); +#endif extern char ia64_ivt[]; EXPORT_SYMBOL(ia64_ivt); diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 781960f80b6..169ec3a7156 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -136,10 +136,8 @@ static void __kprobes update_kprobe_inst_flag(uint template, uint slot, static int __kprobes unsupported_inst(uint template, uint slot, uint major_opcode, unsigned long kprobe_inst, - struct kprobe *p) + unsigned long addr) { - unsigned long addr = (unsigned long)p->addr; - if (bundle_encoding[template][slot] == I) { switch (major_opcode) { case 0x0: //I_UNIT_MISC_OPCODE: @@ -217,7 +215,7 @@ static void __kprobes prepare_break_inst(uint template, uint slot, struct kprobe *p) { unsigned long break_inst = BREAK_INST; - bundle_t *bundle = &p->ainsn.insn.bundle; + bundle_t *bundle = &p->opcode.bundle; /* * Copy the original kprobe_inst qualifying predicate(qp) @@ -423,11 +421,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) unsigned long *kprobe_addr = (unsigned long *)(addr & ~0xFULL); unsigned long kprobe_inst=0; unsigned int slot = addr & 0xf, template, major_opcode = 0; - bundle_t *bundle = &p->ainsn.insn.bundle; - - memcpy(&p->opcode.bundle, kprobe_addr, sizeof(bundle_t)); - memcpy(&p->ainsn.insn.bundle, kprobe_addr, sizeof(bundle_t)); + bundle_t *bundle; + bundle = &((kprobe_opcode_t *)kprobe_addr)->bundle; template = bundle->quad0.template; if(valid_kprobe_addr(template, slot, addr)) @@ -440,20 +436,19 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) /* Get kprobe_inst and major_opcode from the bundle */ get_kprobe_inst(bundle, slot, &kprobe_inst, &major_opcode); - if (unsupported_inst(template, slot, major_opcode, kprobe_inst, p)) + if (unsupported_inst(template, slot, major_opcode, kprobe_inst, addr)) return -EINVAL; - prepare_break_inst(template, slot, major_opcode, kprobe_inst, p); - return 0; -} + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + memcpy(&p->opcode, kprobe_addr, sizeof(kprobe_opcode_t)); + memcpy(p->ainsn.insn, kprobe_addr, sizeof(kprobe_opcode_t)); -void __kprobes flush_insn_slot(struct kprobe *p) -{ - unsigned long arm_addr; + prepare_break_inst(template, slot, major_opcode, kprobe_inst, p); - arm_addr = ((unsigned long)&p->opcode.bundle) & ~0xFULL; - flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); + return 0; } void __kprobes arch_arm_kprobe(struct kprobe *p) @@ -461,9 +456,10 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; - flush_insn_slot(p); - memcpy((char *)arm_addr, &p->ainsn.insn.bundle, sizeof(bundle_t)); - flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); + flush_icache_range((unsigned long)p->ainsn.insn, + (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t)); + memcpy((char *)arm_addr, &p->opcode, sizeof(kprobe_opcode_t)); + flush_icache_range(arm_addr, arm_addr + sizeof(kprobe_opcode_t)); } void __kprobes arch_disarm_kprobe(struct kprobe *p) @@ -471,11 +467,18 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; - /* p->opcode contains the original unaltered bundle */ - memcpy((char *) arm_addr, (char *) &p->opcode.bundle, sizeof(bundle_t)); - flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); + /* p->ainsn.insn contains the original unaltered kprobe_opcode_t */ + memcpy((char *) arm_addr, (char *) p->ainsn.insn, + sizeof(kprobe_opcode_t)); + flush_icache_range(arm_addr, arm_addr + sizeof(kprobe_opcode_t)); } +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + mutex_lock(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + mutex_unlock(&kprobe_mutex); +} /* * We are resuming execution after a single step fault, so the pt_regs * structure reflects the register state after we executed the instruction @@ -486,12 +489,12 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) */ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { - unsigned long bundle_addr = ((unsigned long) (&p->opcode.bundle)) & ~0xFULL; + unsigned long bundle_addr = (unsigned long) (&p->ainsn.insn->bundle); unsigned long resume_addr = (unsigned long)p->addr & ~0xFULL; unsigned long template; int slot = ((unsigned long)p->addr & 0xf); - template = p->opcode.bundle.quad0.template; + template = p->ainsn.insn->bundle.quad0.template; if (slot == 1 && bundle_encoding[template][1] == L) slot = 2; @@ -553,7 +556,7 @@ turn_ss_off: static void __kprobes prepare_ss(struct kprobe *p, struct pt_regs *regs) { - unsigned long bundle_addr = (unsigned long) &p->opcode.bundle; + unsigned long bundle_addr = (unsigned long) &p->ainsn.insn->bundle; unsigned long slot = (unsigned long)p->addr & 0xf; /* single step inline if break instruction */ @@ -768,6 +771,12 @@ static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) */ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + if (ia64_done_with_exception(regs)) + return 1; /* * Let ia64_do_page_fault() fix it. diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 2fbe4536fe1..bfbd8986153 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -54,6 +54,9 @@ * * 2005-10-07 Keith Owens <kaos@sgi.com> * Add notify_die() hooks. + * + * 2006-09-15 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> + * Add printing support for MCA/INIT. */ #include <linux/types.h> #include <linux/init.h> @@ -136,11 +139,175 @@ extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe); static int mca_init __initdata; +/* + * limited & delayed printing support for MCA/INIT handler + */ + +#define mprintk(fmt...) ia64_mca_printk(fmt) + +#define MLOGBUF_SIZE (512+256*NR_CPUS) +#define MLOGBUF_MSGMAX 256 +static char mlogbuf[MLOGBUF_SIZE]; +static DEFINE_SPINLOCK(mlogbuf_wlock); /* mca context only */ +static DEFINE_SPINLOCK(mlogbuf_rlock); /* normal context only */ +static unsigned long mlogbuf_start; +static unsigned long mlogbuf_end; +static unsigned int mlogbuf_finished = 0; +static unsigned long mlogbuf_timestamp = 0; + +static int loglevel_save = -1; +#define BREAK_LOGLEVEL(__console_loglevel) \ + oops_in_progress = 1; \ + if (loglevel_save < 0) \ + loglevel_save = __console_loglevel; \ + __console_loglevel = 15; + +#define RESTORE_LOGLEVEL(__console_loglevel) \ + if (loglevel_save >= 0) { \ + __console_loglevel = loglevel_save; \ + loglevel_save = -1; \ + } \ + mlogbuf_finished = 0; \ + oops_in_progress = 0; + +/* + * Push messages into buffer, print them later if not urgent. + */ +void ia64_mca_printk(const char *fmt, ...) +{ + va_list args; + int printed_len; + char temp_buf[MLOGBUF_MSGMAX]; + char *p; + + va_start(args, fmt); + printed_len = vscnprintf(temp_buf, sizeof(temp_buf), fmt, args); + va_end(args); + + /* Copy the output into mlogbuf */ + if (oops_in_progress) { + /* mlogbuf was abandoned, use printk directly instead. */ + printk(temp_buf); + } else { + spin_lock(&mlogbuf_wlock); + for (p = temp_buf; *p; p++) { + unsigned long next = (mlogbuf_end + 1) % MLOGBUF_SIZE; + if (next != mlogbuf_start) { + mlogbuf[mlogbuf_end] = *p; + mlogbuf_end = next; + } else { + /* buffer full */ + break; + } + } + mlogbuf[mlogbuf_end] = '\0'; + spin_unlock(&mlogbuf_wlock); + } +} +EXPORT_SYMBOL(ia64_mca_printk); + +/* + * Print buffered messages. + * NOTE: call this after returning normal context. (ex. from salinfod) + */ +void ia64_mlogbuf_dump(void) +{ + char temp_buf[MLOGBUF_MSGMAX]; + char *p; + unsigned long index; + unsigned long flags; + unsigned int printed_len; + + /* Get output from mlogbuf */ + while (mlogbuf_start != mlogbuf_end) { + temp_buf[0] = '\0'; + p = temp_buf; + printed_len = 0; + + spin_lock_irqsave(&mlogbuf_rlock, flags); + + index = mlogbuf_start; + while (index != mlogbuf_end) { + *p = mlogbuf[index]; + index = (index + 1) % MLOGBUF_SIZE; + if (!*p) + break; + p++; + if (++printed_len >= MLOGBUF_MSGMAX - 1) + break; + } + *p = '\0'; + if (temp_buf[0]) + printk(temp_buf); + mlogbuf_start = index; + + mlogbuf_timestamp = 0; + spin_unlock_irqrestore(&mlogbuf_rlock, flags); + } +} +EXPORT_SYMBOL(ia64_mlogbuf_dump); + +/* + * Call this if system is going to down or if immediate flushing messages to + * console is required. (ex. recovery was failed, crash dump is going to be + * invoked, long-wait rendezvous etc.) + * NOTE: this should be called from monarch. + */ +static void ia64_mlogbuf_finish(int wait) +{ + BREAK_LOGLEVEL(console_loglevel); + + spin_lock_init(&mlogbuf_rlock); + ia64_mlogbuf_dump(); + printk(KERN_EMERG "mlogbuf_finish: printing switched to urgent mode, " + "MCA/INIT might be dodgy or fail.\n"); + + if (!wait) + return; + + /* wait for console */ + printk("Delaying for 5 seconds...\n"); + udelay(5*1000000); + + mlogbuf_finished = 1; +} +EXPORT_SYMBOL(ia64_mlogbuf_finish); + +/* + * Print buffered messages from INIT context. + */ +static void ia64_mlogbuf_dump_from_init(void) +{ + if (mlogbuf_finished) + return; + + if (mlogbuf_timestamp && (mlogbuf_timestamp + 30*HZ > jiffies)) { + printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT " + " and the system seems to be messed up.\n"); + ia64_mlogbuf_finish(0); + return; + } + + if (!spin_trylock(&mlogbuf_rlock)) { + printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT. " + "Generated messages other than stack dump will be " + "buffered to mlogbuf and will be printed later.\n"); + printk(KERN_ERR "INIT: If messages would not printed after " + "this INIT, wait 30sec and assert INIT again.\n"); + if (!mlogbuf_timestamp) + mlogbuf_timestamp = jiffies; + return; + } + spin_unlock(&mlogbuf_rlock); + ia64_mlogbuf_dump(); +} static void inline ia64_mca_spin(const char *func) { - printk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func); + if (monarch_cpu == smp_processor_id()) + ia64_mlogbuf_finish(0); + mprintk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func); while (1) cpu_relax(); } @@ -344,9 +511,6 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) /* SAL spec states this should run w/ interrupts enabled */ local_irq_enable(); - /* Get the CPE error record and log it */ - ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE); - spin_lock(&cpe_history_lock); if (!cpe_poll_enabled && cpe_vector >= 0) { @@ -375,7 +539,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) mod_timer(&cpe_poll_timer, jiffies + MIN_CPE_POLL_INTERVAL); /* lock already released, get out now */ - return IRQ_HANDLED; + goto out; } else { cpe_history[index++] = now; if (index == CPE_HISTORY_LENGTH) @@ -383,6 +547,10 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) } } spin_unlock(&cpe_history_lock); +out: + /* Get the CPE error record and log it */ + ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE); + return IRQ_HANDLED; } @@ -988,18 +1156,22 @@ ia64_wait_for_slaves(int monarch, const char *type) } if (!missing) goto all_in; - printk(KERN_INFO "OS %s slave did not rendezvous on cpu", type); + /* + * Maybe slave(s) dead. Print buffered messages immediately. + */ + ia64_mlogbuf_finish(0); + mprintk(KERN_INFO "OS %s slave did not rendezvous on cpu", type); for_each_online_cpu(c) { if (c == monarch) continue; if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) - printk(" %d", c); + mprintk(" %d", c); } - printk("\n"); + mprintk("\n"); return; all_in: - printk(KERN_INFO "All OS %s slaves have reached rendezvous\n", type); + mprintk(KERN_INFO "All OS %s slaves have reached rendezvous\n", type); return; } @@ -1027,10 +1199,8 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, struct ia64_mca_notify_die nd = { .sos = sos, .monarch_cpu = &monarch_cpu }; - oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ - console_loglevel = 15; /* make sure printks make it to console */ - printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n", - sos->proc_state_param, cpu, sos->monarch); + mprintk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d " + "monarch=%ld\n", sos->proc_state_param, cpu, sos->monarch); previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; @@ -1066,6 +1236,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, rh->severity = sal_log_severity_corrected; ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA); sos->os_status = IA64_MCA_CORRECTED; + } else { + /* Dump buffered message to console */ + ia64_mlogbuf_finish(1); } if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover) == NOTIFY_STOP) @@ -1106,9 +1279,6 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs) /* SAL spec states this should run w/ interrupts enabled */ local_irq_enable(); - /* Get the CMC error record and log it */ - ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC); - spin_lock(&cmc_history_lock); if (!cmc_polling_enabled) { int i, count = 1; /* we know 1 happened now */ @@ -1141,7 +1311,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs) mod_timer(&cmc_poll_timer, jiffies + CMC_POLL_INTERVAL); /* lock already released, get out now */ - return IRQ_HANDLED; + goto out; } else { cmc_history[index++] = now; if (index == CMC_HISTORY_LENGTH) @@ -1149,6 +1319,10 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs) } } spin_unlock(&cmc_history_lock); +out: + /* Get the CMC error record and log it */ + ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC); + return IRQ_HANDLED; } @@ -1305,6 +1479,15 @@ default_monarch_init_process(struct notifier_block *self, unsigned long val, voi struct task_struct *g, *t; if (val != DIE_INIT_MONARCH_PROCESS) return NOTIFY_DONE; + + /* + * FIXME: mlogbuf will brim over with INIT stack dumps. + * To enable show_stack from INIT, we use oops_in_progress which should + * be used in real oops. This would cause something wrong after INIT. + */ + BREAK_LOGLEVEL(console_loglevel); + ia64_mlogbuf_dump_from_init(); + printk(KERN_ERR "Processes interrupted by INIT -"); for_each_online_cpu(c) { struct ia64_sal_os_state *s; @@ -1326,6 +1509,8 @@ default_monarch_init_process(struct notifier_block *self, unsigned long val, voi } while_each_thread (g, t); read_unlock(&tasklist_lock); } + /* FIXME: This will not restore zapped printk locks. */ + RESTORE_LOGLEVEL(console_loglevel); return NOTIFY_DONE; } @@ -1357,12 +1542,9 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, struct ia64_mca_notify_die nd = { .sos = sos, .monarch_cpu = &monarch_cpu }; - oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ - console_loglevel = 15; /* make sure printks make it to console */ - (void) notify_die(DIE_INIT_ENTER, "INIT", regs, (long)&nd, 0, 0); - printk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n", + mprintk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n", sos->proc_state_param, cpu, sos->monarch); salinfo_log_wakeup(SAL_INFO_TYPE_INIT, NULL, 0, 0); @@ -1375,7 +1557,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, * fix their proms and get their customers updated. */ if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) { - printk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n", + mprintk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n", __FUNCTION__, cpu); atomic_dec(&slaves); sos->monarch = 1; @@ -1387,7 +1569,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, * fix their proms and get their customers updated. */ if (sos->monarch && atomic_add_return(1, &monarchs) > 1) { - printk(KERN_WARNING "%s: Demoting cpu %d to slave.\n", + mprintk(KERN_WARNING "%s: Demoting cpu %d to slave.\n", __FUNCTION__, cpu); atomic_dec(&monarchs); sos->monarch = 0; @@ -1408,7 +1590,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0) == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); - printk("Slave on cpu %d returning to normal service.\n", cpu); + mprintk("Slave on cpu %d returning to normal service.\n", cpu); set_curr_task(cpu, previous_current); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; atomic_dec(&slaves); @@ -1426,7 +1608,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, * same serial line, the user will need some time to switch out of the BMC before * the dump begins. */ - printk("Delaying for 5 seconds...\n"); + mprintk("Delaying for 5 seconds...\n"); udelay(5*1000000); ia64_wait_for_slaves(cpu, "INIT"); /* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through @@ -1439,7 +1621,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0) == NOTIFY_STOP) ia64_mca_spin(__FUNCTION__); - printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); + mprintk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); atomic_dec(&monarchs); set_curr_task(cpu, previous_current); monarch_cpu = -1; diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S index 96047491d1b..c6b607c00de 100644 --- a/arch/ia64/kernel/mca_asm.S +++ b/arch/ia64/kernel/mca_asm.S @@ -1025,18 +1025,13 @@ ia64_old_stack: ia64_set_kernel_registers: add temp3=MCA_SP_OFFSET, r3 - add temp4=MCA_SOS_OFFSET+SOS(OS_GP), r3 mov b0=r2 // save return address GET_IA64_MCA_DATA(temp1) ;; - add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack add r13=temp1, r3 // set current to start of MCA/INIT stack add r20=temp1, r3 // physical start of MCA/INIT stack ;; - ld8 r1=[temp4] // OS GP from SAL OS state - ;; - DATA_PA_TO_VA(r1,temp1) DATA_PA_TO_VA(r12,temp2) DATA_PA_TO_VA(r13,temp3) ;; @@ -1067,6 +1062,10 @@ ia64_set_kernel_registers: mov cr.itir=r18 mov cr.ifa=r13 mov r20=IA64_TR_CURRENT_STACK + + movl r17=FPSR_DEFAULT + ;; + mov.m ar.fpsr=r17 // set ar.fpsr to kernel default value ;; itr.d dtr[r20]=r21 ;; diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 8db6e0cedad..a45009d2bc9 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -79,14 +79,30 @@ static int fatal_mca(const char *fmt, ...) { va_list args; + char buf[256]; va_start(args, fmt); - vprintk(fmt, args); + vsnprintf(buf, sizeof(buf), fmt, args); va_end(args); + ia64_mca_printk(KERN_ALERT "MCA: %s\n", buf); return MCA_NOT_RECOVERED; } +static int +mca_recovered(const char *fmt, ...) +{ + va_list args; + char buf[256]; + + va_start(args, fmt); + vsnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + ia64_mca_printk(KERN_INFO "MCA: %s\n", buf); + + return MCA_RECOVERED; +} + /** * mca_page_isolate - isolate a poisoned page in order not to use it later * @paddr: poisoned memory location @@ -140,6 +156,7 @@ mca_page_isolate(unsigned long paddr) void mca_handler_bh(unsigned long paddr, void *iip, unsigned long ipsr) { + ia64_mlogbuf_dump(); printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, " "iip: %p, psr: 0x%lx,paddr: 0x%lx](%s) encounters MCA.\n", raw_smp_processor_id(), current->pid, current->uid, @@ -440,7 +457,7 @@ recover_from_read_error(slidx_table_t *slidx, /* Is target address valid? */ if (!pbci->tv) - return fatal_mca(KERN_ALERT "MCA: target address not valid\n"); + return fatal_mca("target address not valid"); /* * cpu read or memory-mapped io read @@ -458,7 +475,7 @@ recover_from_read_error(slidx_table_t *slidx, /* Is minstate valid? */ if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate)) - return fatal_mca(KERN_ALERT "MCA: minstate not valid\n"); + return fatal_mca("minstate not valid"); psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr); psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr); @@ -492,13 +509,14 @@ recover_from_read_error(slidx_table_t *slidx, psr2->bn = 1; psr2->i = 0; - return MCA_RECOVERED; + return mca_recovered("user memory corruption. " + "kill affected process - recovered."); } } - return fatal_mca(KERN_ALERT "MCA: kernel context not recovered," - " iip 0x%lx\n", pmsa->pmsa_iip); + return fatal_mca("kernel context not recovered, iip 0x%lx\n", + pmsa->pmsa_iip); } /** @@ -584,13 +602,13 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, * The machine check is corrected. */ if (psp->cm == 1) - return MCA_RECOVERED; + return mca_recovered("machine check is already corrected."); /* * The error was not contained. Software must be reset. */ if (psp->us || psp->ci == 0) - return fatal_mca(KERN_ALERT "MCA: error not contained\n"); + return fatal_mca("error not contained"); /* * The cache check and bus check bits have four possible states @@ -601,22 +619,22 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, * 1 1 Memory error, attempt recovery */ if (psp->bc == 0 || pbci == NULL) - return fatal_mca(KERN_ALERT "MCA: No bus check\n"); + return fatal_mca("No bus check"); /* * Sorry, we cannot handle so many. */ if (peidx_bus_check_num(peidx) > 1) - return fatal_mca(KERN_ALERT "MCA: Too many bus checks\n"); + return fatal_mca("Too many bus checks"); /* * Well, here is only one bus error. */ if (pbci->ib) - return fatal_mca(KERN_ALERT "MCA: Internal Bus error\n"); + return fatal_mca("Internal Bus error"); if (pbci->cc) - return fatal_mca(KERN_ALERT "MCA: Cache-cache error\n"); + return fatal_mca("Cache-cache error"); if (pbci->eb && pbci->bsi > 0) - return fatal_mca(KERN_ALERT "MCA: External bus check fatal status\n"); + return fatal_mca("External bus check fatal status"); /* * This is a local MCA and estimated as recoverble external bus error. @@ -628,7 +646,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, /* * On account of strange SAL error record, we cannot recover. */ - return fatal_mca(KERN_ALERT "MCA: Strange SAL record\n"); + return fatal_mca("Strange SAL record"); } /** @@ -657,10 +675,10 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) /* Now, OS can recover when there is one processor error section */ if (n_proc_err > 1) - return fatal_mca(KERN_ALERT "MCA: Too Many Errors\n"); + return fatal_mca("Too Many Errors"); else if (n_proc_err == 0) - /* Weird SAL record ... We need not to recover */ - return fatal_mca(KERN_ALERT "MCA: Weird SAL record\n"); + /* Weird SAL record ... We can't do anything */ + return fatal_mca("Weird SAL record"); /* Make index of processor error section */ mca_make_peidx((sal_log_processor_info_t*) @@ -671,7 +689,7 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) /* Check whether MCA is global or not */ if (is_mca_global(&peidx, &pbci, sos)) - return fatal_mca(KERN_ALERT "MCA: global MCA\n"); + return fatal_mca("global MCA"); /* Try to recover a processor error */ return recover_from_processor_error(platform_err, &slidx, &peidx, diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h index 31a2e52bb16..c85e943ba5f 100644 --- a/arch/ia64/kernel/mca_drv.h +++ b/arch/ia64/kernel/mca_drv.h @@ -118,3 +118,7 @@ struct mca_table_entry { extern const struct mca_table_entry *search_mca_tables (unsigned long addr); extern int mca_recover_range(unsigned long); +extern void ia64_mca_printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))); +extern void ia64_mlogbuf_dump(void); + diff --git a/arch/ia64/kernel/numa.c b/arch/ia64/kernel/numa.c index 1cc360c83e7..20340631179 100644 --- a/arch/ia64/kernel/numa.c +++ b/arch/ia64/kernel/numa.c @@ -29,6 +29,36 @@ EXPORT_SYMBOL(cpu_to_node_map); cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; +void __cpuinit map_cpu_to_node(int cpu, int nid) +{ + int oldnid; + if (nid < 0) { /* just initialize by zero */ + cpu_to_node_map[cpu] = 0; + return; + } + /* sanity check first */ + oldnid = cpu_to_node_map[cpu]; + if (cpu_isset(cpu, node_to_cpu_mask[oldnid])) { + return; /* nothing to do */ + } + /* we don't have cpu-driven node hot add yet... + In usual case, node is created from SRAT at boot time. */ + if (!node_online(nid)) + nid = first_online_node; + cpu_to_node_map[cpu] = nid; + cpu_set(cpu, node_to_cpu_mask[nid]); + return; +} + +void __cpuinit unmap_cpu_from_node(int cpu, int nid) +{ + WARN_ON(!cpu_isset(cpu, node_to_cpu_mask[nid])); + WARN_ON(cpu_to_node_map[cpu] != nid); + cpu_to_node_map[cpu] = 0; + cpu_clear(cpu, node_to_cpu_mask[nid]); +} + + /** * build_cpu_to_node_map - setup cpu to node and node to cpumask arrays * @@ -49,8 +79,6 @@ void __init build_cpu_to_node_map(void) node = node_cpuid[i].nid; break; } - cpu_to_node_map[cpu] = (node >= 0) ? node : 0; - if (node >= 0) - cpu_set(cpu, node_to_cpu_mask[node]); + map_cpu_to_node(cpu, node); } } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 84a7e52f56f..281004ff7b0 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -34,6 +34,7 @@ #include <linux/file.h> #include <linux/poll.h> #include <linux/vfs.h> +#include <linux/smp.h> #include <linux/pagemap.h> #include <linux/mount.h> #include <linux/bitops.h> @@ -62,6 +63,9 @@ #define PFM_INVALID_ACTIVATION (~0UL) +#define PFM_NUM_PMC_REGS 64 /* PMC save area for ctxsw */ +#define PFM_NUM_PMD_REGS 64 /* PMD save area for ctxsw */ + /* * depth of message queue */ @@ -296,14 +300,17 @@ typedef struct pfm_context { unsigned long ctx_reload_pmcs[4]; /* bitmask of force reload PMC on ctxsw in */ unsigned long ctx_used_monitors[4]; /* bitmask of monitor PMC being used */ - unsigned long ctx_pmcs[IA64_NUM_PMC_REGS]; /* saved copies of PMC values */ + unsigned long ctx_pmcs[PFM_NUM_PMC_REGS]; /* saved copies of PMC values */ unsigned int ctx_used_ibrs[1]; /* bitmask of used IBR (speedup ctxsw in) */ unsigned int ctx_used_dbrs[1]; /* bitmask of used DBR (speedup ctxsw in) */ unsigned long ctx_dbrs[IA64_NUM_DBG_REGS]; /* DBR values (cache) when not loaded */ unsigned long ctx_ibrs[IA64_NUM_DBG_REGS]; /* IBR values (cache) when not loaded */ - pfm_counter_t ctx_pmds[IA64_NUM_PMD_REGS]; /* software state for PMDS */ + pfm_counter_t ctx_pmds[PFM_NUM_PMD_REGS]; /* software state for PMDS */ + + unsigned long th_pmcs[PFM_NUM_PMC_REGS]; /* PMC thread save state */ + unsigned long th_pmds[PFM_NUM_PMD_REGS]; /* PMD thread save state */ u64 ctx_saved_psr_up; /* only contains psr.up value */ @@ -867,7 +874,6 @@ static void pfm_mask_monitoring(struct task_struct *task) { pfm_context_t *ctx = PFM_GET_CTX(task); - struct thread_struct *th = &task->thread; unsigned long mask, val, ovfl_mask; int i; @@ -888,7 +894,7 @@ pfm_mask_monitoring(struct task_struct *task) * So in both cases, the live register contains the owner's * state. We can ONLY touch the PMU registers and NOT the PSR. * - * As a consequence to this call, the thread->pmds[] array + * As a consequence to this call, the ctx->th_pmds[] array * contains stale information which must be ignored * when context is reloaded AND monitoring is active (see * pfm_restart). @@ -923,9 +929,9 @@ pfm_mask_monitoring(struct task_struct *task) mask = ctx->ctx_used_monitors[0] >> PMU_FIRST_COUNTER; for(i= PMU_FIRST_COUNTER; mask; i++, mask>>=1) { if ((mask & 0x1) == 0UL) continue; - ia64_set_pmc(i, th->pmcs[i] & ~0xfUL); - th->pmcs[i] &= ~0xfUL; - DPRINT_ovfl(("pmc[%d]=0x%lx\n", i, th->pmcs[i])); + ia64_set_pmc(i, ctx->th_pmcs[i] & ~0xfUL); + ctx->th_pmcs[i] &= ~0xfUL; + DPRINT_ovfl(("pmc[%d]=0x%lx\n", i, ctx->th_pmcs[i])); } /* * make all of this visible @@ -942,7 +948,6 @@ static void pfm_restore_monitoring(struct task_struct *task) { pfm_context_t *ctx = PFM_GET_CTX(task); - struct thread_struct *th = &task->thread; unsigned long mask, ovfl_mask; unsigned long psr, val; int i, is_system; @@ -1008,9 +1013,9 @@ pfm_restore_monitoring(struct task_struct *task) mask = ctx->ctx_used_monitors[0] >> PMU_FIRST_COUNTER; for(i= PMU_FIRST_COUNTER; mask; i++, mask>>=1) { if ((mask & 0x1) == 0UL) continue; - th->pmcs[i] = ctx->ctx_pmcs[i]; - ia64_set_pmc(i, th->pmcs[i]); - DPRINT(("[%d] pmc[%d]=0x%lx\n", task->pid, i, th->pmcs[i])); + ctx->th_pmcs[i] = ctx->ctx_pmcs[i]; + ia64_set_pmc(i, ctx->th_pmcs[i]); + DPRINT(("[%d] pmc[%d]=0x%lx\n", task->pid, i, ctx->th_pmcs[i])); } ia64_srlz_d(); @@ -1069,7 +1074,6 @@ pfm_restore_pmds(unsigned long *pmds, unsigned long mask) static inline void pfm_copy_pmds(struct task_struct *task, pfm_context_t *ctx) { - struct thread_struct *thread = &task->thread; unsigned long ovfl_val = pmu_conf->ovfl_val; unsigned long mask = ctx->ctx_all_pmds[0]; unsigned long val; @@ -1091,11 +1095,11 @@ pfm_copy_pmds(struct task_struct *task, pfm_context_t *ctx) ctx->ctx_pmds[i].val = val & ~ovfl_val; val &= ovfl_val; } - thread->pmds[i] = val; + ctx->th_pmds[i] = val; DPRINT(("pmd[%d]=0x%lx soft_val=0x%lx\n", i, - thread->pmds[i], + ctx->th_pmds[i], ctx->ctx_pmds[i].val)); } } @@ -1106,7 +1110,6 @@ pfm_copy_pmds(struct task_struct *task, pfm_context_t *ctx) static inline void pfm_copy_pmcs(struct task_struct *task, pfm_context_t *ctx) { - struct thread_struct *thread = &task->thread; unsigned long mask = ctx->ctx_all_pmcs[0]; int i; @@ -1114,8 +1117,8 @@ pfm_copy_pmcs(struct task_struct *task, pfm_context_t *ctx) for (i=0; mask; i++, mask>>=1) { /* masking 0 with ovfl_val yields 0 */ - thread->pmcs[i] = ctx->ctx_pmcs[i]; - DPRINT(("pmc[%d]=0x%lx\n", i, thread->pmcs[i])); + ctx->th_pmcs[i] = ctx->ctx_pmcs[i]; + DPRINT(("pmc[%d]=0x%lx\n", i, ctx->th_pmcs[i])); } } @@ -2859,7 +2862,6 @@ pfm_reset_regs(pfm_context_t *ctx, unsigned long *ovfl_regs, int is_long_reset) static int pfm_write_pmcs(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) { - struct thread_struct *thread = NULL; struct task_struct *task; pfarg_reg_t *req = (pfarg_reg_t *)arg; unsigned long value, pmc_pm; @@ -2880,7 +2882,6 @@ pfm_write_pmcs(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) if (state == PFM_CTX_ZOMBIE) return -EINVAL; if (is_loaded) { - thread = &task->thread; /* * In system wide and when the context is loaded, access can only happen * when the caller is running on the CPU being monitored by the session. @@ -3035,7 +3036,7 @@ pfm_write_pmcs(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) * * The value in ctx_pmcs[] can only be changed in pfm_write_pmcs(). * - * The value in thread->pmcs[] may be modified on overflow, i.e., when + * The value in th_pmcs[] may be modified on overflow, i.e., when * monitoring needs to be stopped. */ if (is_monitor) CTX_USED_MONITOR(ctx, 1UL << cnum); @@ -3049,7 +3050,7 @@ pfm_write_pmcs(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) /* * write thread state */ - if (is_system == 0) thread->pmcs[cnum] = value; + if (is_system == 0) ctx->th_pmcs[cnum] = value; /* * write hardware register if we can @@ -3101,7 +3102,6 @@ error: static int pfm_write_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) { - struct thread_struct *thread = NULL; struct task_struct *task; pfarg_reg_t *req = (pfarg_reg_t *)arg; unsigned long value, hw_value, ovfl_mask; @@ -3125,7 +3125,6 @@ pfm_write_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) * the owner of the local PMU. */ if (likely(is_loaded)) { - thread = &task->thread; /* * In system wide and when the context is loaded, access can only happen * when the caller is running on the CPU being monitored by the session. @@ -3233,7 +3232,7 @@ pfm_write_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) /* * write thread state */ - if (is_system == 0) thread->pmds[cnum] = hw_value; + if (is_system == 0) ctx->th_pmds[cnum] = hw_value; /* * write hardware register if we can @@ -3299,7 +3298,6 @@ abort_mission: static int pfm_read_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) { - struct thread_struct *thread = NULL; struct task_struct *task; unsigned long val = 0UL, lval, ovfl_mask, sval; pfarg_reg_t *req = (pfarg_reg_t *)arg; @@ -3323,7 +3321,6 @@ pfm_read_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) if (state == PFM_CTX_ZOMBIE) return -EINVAL; if (likely(is_loaded)) { - thread = &task->thread; /* * In system wide and when the context is loaded, access can only happen * when the caller is running on the CPU being monitored by the session. @@ -3385,7 +3382,7 @@ pfm_read_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) * if context is zombie, then task does not exist anymore. * In this case, we use the full value saved in the context (pfm_flush_regs()). */ - val = is_loaded ? thread->pmds[cnum] : 0UL; + val = is_loaded ? ctx->th_pmds[cnum] : 0UL; } rd_func = pmu_conf->pmd_desc[cnum].read_check; @@ -4354,8 +4351,8 @@ pfm_context_load(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) pfm_copy_pmds(task, ctx); pfm_copy_pmcs(task, ctx); - pmcs_source = thread->pmcs; - pmds_source = thread->pmds; + pmcs_source = ctx->th_pmcs; + pmds_source = ctx->th_pmds; /* * always the case for system-wide @@ -5864,14 +5861,12 @@ void pfm_save_regs(struct task_struct *task) { pfm_context_t *ctx; - struct thread_struct *t; unsigned long flags; u64 psr; ctx = PFM_GET_CTX(task); if (ctx == NULL) return; - t = &task->thread; /* * we always come here with interrupts ALREADY disabled by @@ -5929,19 +5924,19 @@ pfm_save_regs(struct task_struct *task) * guarantee we will be schedule at that same * CPU again. */ - pfm_save_pmds(t->pmds, ctx->ctx_used_pmds[0]); + pfm_save_pmds(ctx->th_pmds, ctx->ctx_used_pmds[0]); /* * save pmc0 ia64_srlz_d() done in pfm_save_pmds() * we will need it on the restore path to check * for pending overflow. */ - t->pmcs[0] = ia64_get_pmc(0); + ctx->th_pmcs[0] = ia64_get_pmc(0); /* * unfreeze PMU if had pending overflows */ - if (t->pmcs[0] & ~0x1UL) pfm_unfreeze_pmu(); + if (ctx->th_pmcs[0] & ~0x1UL) pfm_unfreeze_pmu(); /* * finally, allow context access. @@ -5986,7 +5981,6 @@ static void pfm_lazy_save_regs (struct task_struct *task) { pfm_context_t *ctx; - struct thread_struct *t; unsigned long flags; { u64 psr = pfm_get_psr(); @@ -5994,7 +5988,6 @@ pfm_lazy_save_regs (struct task_struct *task) } ctx = PFM_GET_CTX(task); - t = &task->thread; /* * we need to mask PMU overflow here to @@ -6019,19 +6012,19 @@ pfm_lazy_save_regs (struct task_struct *task) /* * save all the pmds we use */ - pfm_save_pmds(t->pmds, ctx->ctx_used_pmds[0]); + pfm_save_pmds(ctx->th_pmds, ctx->ctx_used_pmds[0]); /* * save pmc0 ia64_srlz_d() done in pfm_save_pmds() * it is needed to check for pended overflow * on the restore path */ - t->pmcs[0] = ia64_get_pmc(0); + ctx->th_pmcs[0] = ia64_get_pmc(0); /* * unfreeze PMU if had pending overflows */ - if (t->pmcs[0] & ~0x1UL) pfm_unfreeze_pmu(); + if (ctx->th_pmcs[0] & ~0x1UL) pfm_unfreeze_pmu(); /* * now get can unmask PMU interrupts, they will @@ -6050,7 +6043,6 @@ void pfm_load_regs (struct task_struct *task) { pfm_context_t *ctx; - struct thread_struct *t; unsigned long pmc_mask = 0UL, pmd_mask = 0UL; unsigned long flags; u64 psr, psr_up; @@ -6061,11 +6053,10 @@ pfm_load_regs (struct task_struct *task) BUG_ON(GET_PMU_OWNER()); - t = &task->thread; /* * possible on unload */ - if (unlikely((t->flags & IA64_THREAD_PM_VALID) == 0)) return; + if (unlikely((task->thread.flags & IA64_THREAD_PM_VALID) == 0)) return; /* * we always come here with interrupts ALREADY disabled by @@ -6147,21 +6138,21 @@ pfm_load_regs (struct task_struct *task) * * XXX: optimize here */ - if (pmd_mask) pfm_restore_pmds(t->pmds, pmd_mask); - if (pmc_mask) pfm_restore_pmcs(t->pmcs, pmc_mask); + if (pmd_mask) pfm_restore_pmds(ctx->th_pmds, pmd_mask); + if (pmc_mask) pfm_restore_pmcs(ctx->th_pmcs, pmc_mask); /* * check for pending overflow at the time the state * was saved. */ - if (unlikely(PMC0_HAS_OVFL(t->pmcs[0]))) { + if (unlikely(PMC0_HAS_OVFL(ctx->th_pmcs[0]))) { /* * reload pmc0 with the overflow information * On McKinley PMU, this will trigger a PMU interrupt */ - ia64_set_pmc(0, t->pmcs[0]); + ia64_set_pmc(0, ctx->th_pmcs[0]); ia64_srlz_d(); - t->pmcs[0] = 0UL; + ctx->th_pmcs[0] = 0UL; /* * will replay the PMU interrupt @@ -6214,7 +6205,6 @@ pfm_load_regs (struct task_struct *task) void pfm_load_regs (struct task_struct *task) { - struct thread_struct *t; pfm_context_t *ctx; struct task_struct *owner; unsigned long pmd_mask, pmc_mask; @@ -6223,7 +6213,6 @@ pfm_load_regs (struct task_struct *task) owner = GET_PMU_OWNER(); ctx = PFM_GET_CTX(task); - t = &task->thread; psr = pfm_get_psr(); BUG_ON(psr & (IA64_PSR_UP|IA64_PSR_PP)); @@ -6286,22 +6275,22 @@ pfm_load_regs (struct task_struct *task) */ pmc_mask = ctx->ctx_all_pmcs[0]; - pfm_restore_pmds(t->pmds, pmd_mask); - pfm_restore_pmcs(t->pmcs, pmc_mask); + pfm_restore_pmds(ctx->th_pmds, pmd_mask); + pfm_restore_pmcs(ctx->th_pmcs, pmc_mask); /* * check for pending overflow at the time the state * was saved. */ - if (unlikely(PMC0_HAS_OVFL(t->pmcs[0]))) { + if (unlikely(PMC0_HAS_OVFL(ctx->th_pmcs[0]))) { /* * reload pmc0 with the overflow information * On McKinley PMU, this will trigger a PMU interrupt */ - ia64_set_pmc(0, t->pmcs[0]); + ia64_set_pmc(0, ctx->th_pmcs[0]); ia64_srlz_d(); - t->pmcs[0] = 0UL; + ctx->th_pmcs[0] = 0UL; /* * will replay the PMU interrupt @@ -6376,11 +6365,11 @@ pfm_flush_pmds(struct task_struct *task, pfm_context_t *ctx) */ pfm_unfreeze_pmu(); } else { - pmc0 = task->thread.pmcs[0]; + pmc0 = ctx->th_pmcs[0]; /* * clear whatever overflow status bits there were */ - task->thread.pmcs[0] = 0; + ctx->th_pmcs[0] = 0; } ovfl_val = pmu_conf->ovfl_val; /* @@ -6401,7 +6390,7 @@ pfm_flush_pmds(struct task_struct *task, pfm_context_t *ctx) /* * can access PMU always true in system wide mode */ - val = pmd_val = can_access_pmu ? ia64_get_pmd(i) : task->thread.pmds[i]; + val = pmd_val = can_access_pmu ? ia64_get_pmd(i) : ctx->th_pmds[i]; if (PMD_IS_COUNTING(i)) { DPRINT(("[%d] pmd[%d] ctx_pmd=0x%lx hw_pmd=0x%lx\n", @@ -6433,7 +6422,7 @@ pfm_flush_pmds(struct task_struct *task, pfm_context_t *ctx) DPRINT(("[%d] ctx_pmd[%d]=0x%lx pmd_val=0x%lx\n", task->pid, i, val, pmd_val)); - if (is_self) task->thread.pmds[i] = pmd_val; + if (is_self) ctx->th_pmds[i] = pmd_val; ctx->ctx_pmds[i].val = val; } @@ -6677,7 +6666,7 @@ pfm_init(void) ffz(pmu_conf->ovfl_val)); /* sanity check */ - if (pmu_conf->num_pmds >= IA64_NUM_PMD_REGS || pmu_conf->num_pmcs >= IA64_NUM_PMC_REGS) { + if (pmu_conf->num_pmds >= PFM_NUM_PMD_REGS || pmu_conf->num_pmcs >= PFM_NUM_PMC_REGS) { printk(KERN_ERR "perfmon: not enough pmc/pmd, perfmon disabled\n"); pmu_conf = NULL; return -1; @@ -6752,7 +6741,6 @@ void dump_pmu_state(const char *from) { struct task_struct *task; - struct thread_struct *t; struct pt_regs *regs; pfm_context_t *ctx; unsigned long psr, dcr, info, flags; @@ -6797,16 +6785,14 @@ dump_pmu_state(const char *from) ia64_psr(regs)->up = 0; ia64_psr(regs)->pp = 0; - t = ¤t->thread; - for (i=1; PMC_IS_LAST(i) == 0; i++) { if (PMC_IS_IMPL(i) == 0) continue; - printk("->CPU%d pmc[%d]=0x%lx thread_pmc[%d]=0x%lx\n", this_cpu, i, ia64_get_pmc(i), i, t->pmcs[i]); + printk("->CPU%d pmc[%d]=0x%lx thread_pmc[%d]=0x%lx\n", this_cpu, i, ia64_get_pmc(i), i, ctx->th_pmcs[i]); } for (i=1; PMD_IS_LAST(i) == 0; i++) { if (PMD_IS_IMPL(i) == 0) continue; - printk("->CPU%d pmd[%d]=0x%lx thread_pmd[%d]=0x%lx\n", this_cpu, i, ia64_get_pmd(i), i, t->pmds[i]); + printk("->CPU%d pmd[%d]=0x%lx thread_pmd[%d]=0x%lx\n", this_cpu, i, ia64_get_pmd(i), i, ctx->th_pmds[i]); } if (ctx) { diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 9065f0f01ba..e63b8ca5344 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -266,6 +266,7 @@ salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe) /* Check for outstanding MCA/INIT records every minute (arbitrary) */ #define SALINFO_TIMER_DELAY (60*HZ) static struct timer_list salinfo_timer; +extern void ia64_mlogbuf_dump(void); static void salinfo_timeout_check(struct salinfo_data *data) @@ -283,6 +284,7 @@ salinfo_timeout_check(struct salinfo_data *data) static void salinfo_timeout (unsigned long arg) { + ia64_mlogbuf_dump(); salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_MCA); salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_INIT); salinfo_timer.expires = jiffies + SALINFO_TIMER_DELAY; @@ -332,6 +334,8 @@ retry: if (cpu == -1) goto retry; + ia64_mlogbuf_dump(); + /* for next read, start checking at next CPU */ data->cpu_check = cpu; if (++data->cpu_check == NR_CPUS) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 7ad0d9cc6db..84f93c0f2c6 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -509,7 +509,7 @@ show_cpuinfo (struct seq_file *m, void *v) { 1UL << 1, "spontaneous deferral"}, { 1UL << 2, "16-byte atomic ops" } }; - char family[32], features[128], *cp, sep; + char features[128], *cp, sep; struct cpuinfo_ia64 *c = v; unsigned long mask; unsigned long proc_freq; @@ -517,12 +517,6 @@ show_cpuinfo (struct seq_file *m, void *v) mask = c->features; - switch (c->family) { - case 0x07: memcpy(family, "Itanium", 8); break; - case 0x1f: memcpy(family, "Itanium 2", 10); break; - default: sprintf(family, "%u", c->family); break; - } - /* build the feature string: */ memcpy(features, " standard", 10); cp = features; @@ -553,8 +547,9 @@ show_cpuinfo (struct seq_file *m, void *v) "processor : %d\n" "vendor : %s\n" "arch : IA-64\n" - "family : %s\n" + "family : %u\n" "model : %u\n" + "model name : %s\n" "revision : %u\n" "archrev : %u\n" "features :%s\n" /* don't change this---it _is_ right! */ @@ -563,7 +558,8 @@ show_cpuinfo (struct seq_file *m, void *v) "cpu MHz : %lu.%06lu\n" "itc MHz : %lu.%06lu\n" "BogoMIPS : %lu.%02lu\n", - cpunum, c->vendor, family, c->model, c->revision, c->archrev, + cpunum, c->vendor, c->family, c->model, + c->model_name, c->revision, c->archrev, features, c->ppn, c->number, proc_freq / 1000, proc_freq % 1000, c->itc_freq / 1000000, c->itc_freq % 1000000, @@ -611,6 +607,31 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo }; +static char brandname[128]; + +static char * __cpuinit +get_model_name(__u8 family, __u8 model) +{ + char brand[128]; + + if (ia64_pal_get_brand_info(brand)) { + if (family == 0x7) + memcpy(brand, "Merced", 7); + else if (family == 0x1f) switch (model) { + case 0: memcpy(brand, "McKinley", 9); break; + case 1: memcpy(brand, "Madison", 8); break; + case 2: memcpy(brand, "Madison up to 9M cache", 23); break; + } else + memcpy(brand, "Unknown", 8); + } + if (brandname[0] == '\0') + return strcpy(brandname, brand); + else if (strcmp(brandname, brand) == 0) + return brandname; + else + return kstrdup(brand, GFP_KERNEL); +} + static void __cpuinit identify_cpu (struct cpuinfo_ia64 *c) { @@ -640,7 +661,6 @@ identify_cpu (struct cpuinfo_ia64 *c) pal_status_t status; unsigned long impl_va_msb = 50, phys_addr_size = 44; /* Itanium defaults */ int i; - for (i = 0; i < 5; ++i) cpuid.bits[i] = ia64_get_cpuid(i); @@ -663,6 +683,7 @@ identify_cpu (struct cpuinfo_ia64 *c) c->family = cpuid.field.family; c->archrev = cpuid.field.archrev; c->features = cpuid.field.features; + c->model_name = get_model_name(c->family, c->model); status = ia64_pal_vm_summary(&vm1, &vm2); if (status == PAL_STATUS_SUCCESS) { diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 6203ed4ec8c..f7d7f566814 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -879,3 +879,27 @@ identify_siblings(struct cpuinfo_ia64 *c) c->core_id = info.log1_cid; c->thread_id = info.log1_tid; } + +/* + * returns non zero, if multi-threading is enabled + * on at least one physical package. Due to hotplug cpu + * and (maxcpus=), all threads may not necessarily be enabled + * even though the processor supports multi-threading. + */ +int is_multithreading_enabled(void) +{ + int i, j; + + for_each_present_cpu(i) { + for_each_present_cpu(j) { + if (j == i) + continue; + if ((cpu_data(j)->socket_id == cpu_data(i)->socket_id)) { + if (cpu_data(j)->core_id == cpu_data(i)->core_id) + return 1; + } + } + } + return 0; +} +EXPORT_SYMBOL_GPL(is_multithreading_enabled); diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index f648c610b10..5629b45e89c 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,6 +36,7 @@ int arch_register_cpu(int num) */ if (!can_cpei_retarget() && is_cpu_cpei_target(num)) sysfs_cpus[num].cpu.no_control = 1; + map_cpu_to_node(num, node_cpuid[num].nid); #endif return register_cpu(&sysfs_cpus[num].cpu, num); @@ -45,7 +46,8 @@ int arch_register_cpu(int num) void arch_unregister_cpu(int num) { - return unregister_cpu(&sysfs_cpus[num].cpu); + unregister_cpu(&sysfs_cpus[num].cpu); + unmap_cpu_from_node(num, cpu_to_node(num)); } EXPORT_SYMBOL(arch_register_cpu); EXPORT_SYMBOL(arch_unregister_cpu); diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index 4c73a676366..c58e933694d 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -98,7 +98,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid) /* attempt to allocate a granule's worth of cached memory pages */ - page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO, + page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, IA64_GRANULE_SHIFT-PAGE_SHIFT); if (!page) { mutex_unlock(&uc_pool->add_chunk_mutex); diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 5b0d5f64a9b..b3b2e389d6b 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -184,7 +184,9 @@ SECTIONS *(.data.gate) __stop_gate_section = .; } - . = ALIGN(PAGE_SIZE); /* make sure the gate page doesn't expose kernel data */ + . = ALIGN(PAGE_SIZE); /* make sure the gate page doesn't expose + * kernel data + */ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) } @@ -202,7 +204,9 @@ SECTIONS *(.data.percpu) __per_cpu_end = .; } - . = __phys_per_cpu_start + PERCPU_PAGE_SIZE; /* ensure percpu data fits into percpu page size */ + . = __phys_per_cpu_start + PERCPU_PAGE_SIZE; /* ensure percpu data fits + * into percpu page size + */ data : { } :data .data : AT(ADDR(.data) - LOAD_OFFSET) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index e004143ba86..daf977ff292 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -26,7 +26,6 @@ #include <asm/mca.h> #ifdef CONFIG_VIRTUAL_MEM_MAP -static unsigned long num_dma_physpages; static unsigned long max_gap; #endif @@ -41,10 +40,11 @@ show_mem (void) int i, total = 0, reserved = 0; int shared = 0, cached = 0; - printk("Mem-info:\n"); + printk(KERN_INFO "Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + printk(KERN_INFO "Free swap: %6ldkB\n", + nr_swap_pages<<(PAGE_SHIFT-10)); i = max_mapnr; for (i = 0; i < max_mapnr; i++) { if (!pfn_valid(i)) { @@ -63,12 +63,12 @@ show_mem (void) else if (page_count(mem_map + i)) shared += page_count(mem_map + i) - 1; } - printk("%d pages of RAM\n", total); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); - printk("%ld pages in page table cache\n", - pgtable_quicklist_total_size()); + printk(KERN_INFO "%d pages of RAM\n", total); + printk(KERN_INFO "%d reserved pages\n", reserved); + printk(KERN_INFO "%d pages shared\n", shared); + printk(KERN_INFO "%d pages swap cached\n", cached); + printk(KERN_INFO "%ld pages in page table cache\n", + pgtable_quicklist_total_size()); } /* physical address where the bootmem map is located */ @@ -218,18 +218,6 @@ count_pages (u64 start, u64 end, void *arg) return 0; } -#ifdef CONFIG_VIRTUAL_MEM_MAP -static int -count_dma_pages (u64 start, u64 end, void *arg) -{ - unsigned long *count = arg; - - if (start < MAX_DMA_ADDRESS) - *count += (min(end, MAX_DMA_ADDRESS) - start) >> PAGE_SHIFT; - return 0; -} -#endif - /* * Set up the page tables. */ @@ -238,45 +226,22 @@ void __init paging_init (void) { unsigned long max_dma; - unsigned long zones_size[MAX_NR_ZONES]; -#ifdef CONFIG_VIRTUAL_MEM_MAP - unsigned long zholes_size[MAX_NR_ZONES]; -#endif - - /* initialize mem_map[] */ - - memset(zones_size, 0, sizeof(zones_size)); + unsigned long nid = 0; + unsigned long max_zone_pfns[MAX_NR_ZONES]; num_physpages = 0; efi_memmap_walk(count_pages, &num_physpages); max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = max_dma; + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_VIRTUAL_MEM_MAP - memset(zholes_size, 0, sizeof(zholes_size)); - - num_dma_physpages = 0; - efi_memmap_walk(count_dma_pages, &num_dma_physpages); - - if (max_low_pfn < max_dma) { - zones_size[ZONE_DMA] = max_low_pfn; - zholes_size[ZONE_DMA] = max_low_pfn - num_dma_physpages; - } else { - zones_size[ZONE_DMA] = max_dma; - zholes_size[ZONE_DMA] = max_dma - num_dma_physpages; - if (num_physpages > num_dma_physpages) { - zones_size[ZONE_NORMAL] = max_low_pfn - max_dma; - zholes_size[ZONE_NORMAL] = - ((max_low_pfn - max_dma) - - (num_physpages - num_dma_physpages)); - } - } - + efi_memmap_walk(register_active_ranges, &nid); efi_memmap_walk(find_largest_hole, (u64 *)&max_gap); if (max_gap < LARGE_GAP) { vmem_map = (struct page *) 0; - free_area_init_node(0, NODE_DATA(0), zones_size, 0, - zholes_size); + free_area_init_nodes(max_zone_pfns); } else { unsigned long map_size; @@ -288,20 +253,19 @@ paging_init (void) vmem_map = (struct page *) vmalloc_end; efi_memmap_walk(create_mem_map_page_table, NULL); - NODE_DATA(0)->node_mem_map = vmem_map; - free_area_init_node(0, NODE_DATA(0), zones_size, - 0, zholes_size); + /* + * alloc_node_mem_map makes an adjustment for mem_map + * which isn't compatible with vmem_map. + */ + NODE_DATA(0)->node_mem_map = vmem_map + + find_min_pfn_with_active_regions(); + free_area_init_nodes(max_zone_pfns); printk("Virtual mem_map starts at 0x%p\n", mem_map); } #else /* !CONFIG_VIRTUAL_MEM_MAP */ - if (max_low_pfn < max_dma) - zones_size[ZONE_DMA] = max_low_pfn; - else { - zones_size[ZONE_DMA] = max_dma; - zones_size[ZONE_NORMAL] = max_low_pfn - max_dma; - } - free_area_init(zones_size); + add_active_range(0, 0, max_low_pfn); + free_area_init_nodes(max_zone_pfns); #endif /* !CONFIG_VIRTUAL_MEM_MAP */ zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); } diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index d260bffa01a..d497b6b0f5b 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -547,15 +547,16 @@ void show_mem(void) unsigned long total_present = 0; pg_data_t *pgdat; - printk("Mem-info:\n"); + printk(KERN_INFO "Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + printk(KERN_INFO "Free swap: %6ldkB\n", + nr_swap_pages<<(PAGE_SHIFT-10)); + printk(KERN_INFO "Node memory in pages:\n"); for_each_online_pgdat(pgdat) { unsigned long present; unsigned long flags; int shared = 0, cached = 0, reserved = 0; - printk("Node ID: %d\n", pgdat->node_id); pgdat_resize_lock(pgdat, &flags); present = pgdat->node_present_pages; for(i = 0; i < pgdat->node_spanned_pages; i++) { @@ -579,18 +580,17 @@ void show_mem(void) total_reserved += reserved; total_cached += cached; total_shared += shared; - printk("\t%ld pages of RAM\n", present); - printk("\t%d reserved pages\n", reserved); - printk("\t%d pages shared\n", shared); - printk("\t%d pages swap cached\n", cached); + printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, " + "shrd: %10d, swpd: %10d\n", pgdat->node_id, + present, reserved, shared, cached); } - printk("%ld pages of RAM\n", total_present); - printk("%d reserved pages\n", total_reserved); - printk("%d pages shared\n", total_shared); - printk("%d pages swap cached\n", total_cached); - printk("Total of %ld pages in page table cache\n", - pgtable_quicklist_total_size()); - printk("%d free buffer pages\n", nr_free_buffer_pages()); + printk(KERN_INFO "%ld pages of RAM\n", total_present); + printk(KERN_INFO "%d reserved pages\n", total_reserved); + printk(KERN_INFO "%d pages shared\n", total_shared); + printk(KERN_INFO "%d pages swap cached\n", total_cached); + printk(KERN_INFO "Total of %ld pages in page table cache\n", + pgtable_quicklist_total_size()); + printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages()); } /** @@ -654,6 +654,7 @@ static __init int count_node_pages(unsigned long start, unsigned long len, int n { unsigned long end = start + len; + add_active_range(node, start >> PAGE_SHIFT, end >> PAGE_SHIFT); mem_data[node].num_physpages += len >> PAGE_SHIFT; if (start <= __pa(MAX_DMA_ADDRESS)) mem_data[node].num_dma_physpages += @@ -678,10 +679,10 @@ static __init int count_node_pages(unsigned long start, unsigned long len, int n void __init paging_init(void) { unsigned long max_dma; - unsigned long zones_size[MAX_NR_ZONES]; - unsigned long zholes_size[MAX_NR_ZONES]; unsigned long pfn_offset = 0; + unsigned long max_pfn = 0; int node; + unsigned long max_zone_pfns[MAX_NR_ZONES]; max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; @@ -698,47 +699,20 @@ void __init paging_init(void) #endif for_each_online_node(node) { - memset(zones_size, 0, sizeof(zones_size)); - memset(zholes_size, 0, sizeof(zholes_size)); - num_physpages += mem_data[node].num_physpages; - - if (mem_data[node].min_pfn >= max_dma) { - /* All of this node's memory is above ZONE_DMA */ - zones_size[ZONE_NORMAL] = mem_data[node].max_pfn - - mem_data[node].min_pfn; - zholes_size[ZONE_NORMAL] = mem_data[node].max_pfn - - mem_data[node].min_pfn - - mem_data[node].num_physpages; - } else if (mem_data[node].max_pfn < max_dma) { - /* All of this node's memory is in ZONE_DMA */ - zones_size[ZONE_DMA] = mem_data[node].max_pfn - - mem_data[node].min_pfn; - zholes_size[ZONE_DMA] = mem_data[node].max_pfn - - mem_data[node].min_pfn - - mem_data[node].num_dma_physpages; - } else { - /* This node has memory in both zones */ - zones_size[ZONE_DMA] = max_dma - - mem_data[node].min_pfn; - zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - - mem_data[node].num_dma_physpages; - zones_size[ZONE_NORMAL] = mem_data[node].max_pfn - - max_dma; - zholes_size[ZONE_NORMAL] = zones_size[ZONE_NORMAL] - - (mem_data[node].num_physpages - - mem_data[node].num_dma_physpages); - } - pfn_offset = mem_data[node].min_pfn; #ifdef CONFIG_VIRTUAL_MEM_MAP NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset; #endif - free_area_init_node(node, NODE_DATA(node), zones_size, - pfn_offset, zholes_size); + if (mem_data[node].max_pfn > max_pfn) + max_pfn = mem_data[node].max_pfn; } + max_zone_pfns[ZONE_DMA] = max_dma; + max_zone_pfns[ZONE_NORMAL] = max_pfn; + free_area_init_nodes(max_zone_pfns); + zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); } diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 30617ccb4f7..ff87a5cba39 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -593,6 +593,18 @@ find_largest_hole (u64 start, u64 end, void *arg) last_end = end; return 0; } + +int __init +register_active_ranges(u64 start, u64 end, void *nid) +{ + BUG_ON(nid == NULL); + BUG_ON(*(unsigned long *)nid >= MAX_NUMNODES); + + add_active_range(*(unsigned long *)nid, + __pa(start) >> PAGE_SHIFT, + __pa(end) >> PAGE_SHIFT); + return 0; +} #endif /* CONFIG_VIRTUAL_MEM_MAP */ static int __init diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 60b45e79f08..15c7c670da3 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -562,7 +562,8 @@ pcibios_enable_device (struct pci_dev *dev, int mask) void pcibios_disable_device (struct pci_dev *dev) { - acpi_pci_irq_disable(dev); + if (dev->is_enabled) + acpi_pci_irq_disable(dev); } void diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 27dee458406..7f73ad4408a 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -277,8 +277,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) } /* temporary buffer used during unaligned transfers */ - bteBlock_unaligned = kmalloc(len + 3 * L1_CACHE_BYTES, - GFP_KERNEL | GFP_DMA); + bteBlock_unaligned = kmalloc(len + 3 * L1_CACHE_BYTES, GFP_KERNEL); if (bteBlock_unaligned == NULL) { return BTEFAIL_NOTAVAIL; } diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 9a8a29339d2..b632b9c1e3b 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -32,9 +32,10 @@ #include <linux/cpumask.h> #include <linux/smp_lock.h> #include <linux/nodemask.h> +#include <linux/smp.h> + #include <asm/processor.h> #include <asm/topology.h> -#include <asm/smp.h> #include <asm/semaphore.h> #include <asm/uaccess.h> #include <asm/sal.h> diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index b71348fec1f..bbd97c85bc5 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -100,7 +100,7 @@ void free_initrd_mem(unsigned long, unsigned long); #ifndef CONFIG_DISCONTIGMEM unsigned long __init zone_sizes_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; unsigned long max_dma; unsigned long low; unsigned long start_pfn; diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c index e4c233eef19..06e538d1be3 100644 --- a/arch/m68knommu/mm/init.c +++ b/arch/m68knommu/mm/init.c @@ -136,7 +136,7 @@ void paging_init(void) #endif { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 330f6abc770..30750c54bdf 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -126,7 +126,7 @@ config BASLER_EXCITE select IRQ_CPU select IRQ_CPU_RM7K select IRQ_CPU_RM9K - select SERIAL_RM9000 + select MIPS_RM9122 select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -203,26 +203,6 @@ config MIPS_EV64120 <http://www.marvell.com/>. Say Y here if you wish to build a kernel for this platform. -config MIPS_EV96100 - bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)" - depends on EXPERIMENTAL - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select MIPS_GT96100 - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_R5000 - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_BIG_ENDIAN - help - This is an evaluation board based on the Galileo GT-96100 LAN/WAN - communications controllers containing a MIPS R5000 compatible core - running at 83MHz. Their website is <http://www.marvell.com/>. Say Y - here if you wish to build a kernel for this platform. - config MIPS_IVR bool "Globespan IVR board" select DMA_NONCOHERENT @@ -974,6 +954,12 @@ config MIPS_TX3927 bool select HAS_TXX9_SERIAL +config MIPS_RM9122 + bool + select SERIAL_RM9000 + select GPI_RM9000 + select WDT_RM9000 + config PCI_MARVELL bool @@ -1024,6 +1010,15 @@ config EMMA2RH depends on MARKEINS default y +config SERIAL_RM9000 + bool + +config GPI_RM9000 + bool + +config WDT_RM9000 + bool + # # Unfortunately not all GT64120 systems run the chip at the same clock. # As the user for the clock rate and try to minimize the available options. @@ -1054,10 +1049,6 @@ config AU1X00_USB_DEVICE depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 default n -config MIPS_GT96100 - bool - select MIPS_GT64120 - config IT8172_CIR bool depends on MIPS_ITE8172 || MIPS_IVR @@ -1527,6 +1518,7 @@ config MIPS_MT_SMTC select CPU_MIPSR2_SRS select MIPS_MT select SMP + select SYS_SUPPORTS_SMP help This is a kernel model which is known a SMTC or lately has been marketesed into SMVP. @@ -1538,6 +1530,7 @@ config MIPS_MT_SMP select CPU_MIPSR2_SRS select MIPS_MT select SMP + select SYS_SUPPORTS_SMP help This is a kernel model which is also known a VSMP or lately has been marketesed into SMVP. @@ -1649,9 +1642,7 @@ config GENERIC_IRQ_PROBE default y config IRQ_PER_CPU - depends on SMP bool - default y # # - Highmem only makes sense for the 32-bit kernel. @@ -1719,6 +1710,7 @@ source "mm/Kconfig" config SMP bool "Multi-Processing support" depends on SYS_SUPPORTS_SMP + select IRQ_PER_CPU help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d333ce4ba26..e521826b423 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -280,13 +280,6 @@ cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120 load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000 # -# Galileo EV96100 Board -# -core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/ -cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100 -load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000 - -# # Wind River PPMC Board (4KC + GT64120) # core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/ @@ -330,6 +323,7 @@ load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 # MIPS SEAD board # core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/ +cflags-$(CONFIG_MIPS_SEAD) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 # diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 98244d51c15..c4fae8ff467 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -230,7 +230,7 @@ EXPORT_SYMBOL(au1xxx_ddma_add_device); */ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, - void (*callback)(int, void *, struct pt_regs *), void *callparam) + void (*callback)(int, void *), void *callparam) { unsigned long flags; u32 used, chan, rv; @@ -248,8 +248,10 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, au1xxx_dbdma_init(); dbdma_initialized = 1; - if ((stp = find_dbdev_id(srcid)) == NULL) return 0; - if ((dtp = find_dbdev_id(destid)) == NULL) return 0; + if ((stp = find_dbdev_id(srcid)) == NULL) + return 0; + if ((dtp = find_dbdev_id(destid)) == NULL) + return 0; used = 0; rv = 0; @@ -869,7 +871,7 @@ dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) au_sync(); if (ctp->chan_callback) - (ctp->chan_callback)(irq, ctp->chan_callparam, regs); + (ctp->chan_callback)(irq, ctp->chan_callparam); ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); return IRQ_RETVAL(1); diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile index 4c7d763f211..51d62bd5d90 100644 --- a/arch/mips/au1000/db1x00/Makefile +++ b/arch/mips/au1000/db1x00/Makefile @@ -6,4 +6,3 @@ # Makefile for the Alchemy Semiconductor Db1x00 board. lib-y := init.o board_setup.o irqmap.o -obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c deleted file mode 100644 index 0942dcf6951..00000000000 --- a/arch/mips/au1000/db1x00/mirage_ts.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * linux/arch/mips/au1000/db1x00/mirage_ts.c - * - * BRIEF MODULE DESCRIPTION - * Glue between Mirage board-specific touchscreen pieces - * and generic Wolfson Codec touchscreen support. - * - * Based on pb1100_ts.c used in Hydrogen II. - * - * Copyright (c) 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/wait.h> - -#include <asm/segment.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/delay.h> -#include <asm/au1000.h> - -/* - * Imported interface to Wolfson Codec driver. - */ -extern void *wm97xx_ts_get_handle(int which); -extern int wm97xx_ts_ready(void* ts_handle); -extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans); -extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg); -extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val); -extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure); -extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z); - -int wm97xx_comodule_present = 1; - - -#define TS_NAME "mirage_ts" - -#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg) -#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg) -#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg) -#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg) - - -#define PEN_DOWN_IRQ AU1000_GPIO_7 - -static struct task_struct *ts_task = 0; -static DECLARE_COMPLETION(ts_complete); -static DECLARE_WAIT_QUEUE_HEAD(pendown_wait); - -#ifdef CONFIG_WM97XX_FIVEWIRETS -static int release_pressure = 1; -#else -static int release_pressure = 50; -#endif - -typedef struct { - long x; - long y; -} DOWN_EVENT; - -#define SAMPLE_RATE 50 /* samples per second */ -#define PEN_DEBOUNCE 5 /* samples for settling - fn of SAMPLE_RATE */ -#define PEN_UP_TIMEOUT 10 /* in seconds */ -#define PEN_UP_SETTLE 5 /* samples per second */ - -static struct { - int xscale; - int xtrans; - int yscale; - int ytrans; -} mirage_ts_cal = -{ -#if 0 - .xscale = 84, - .xtrans = -157, - .yscale = 66, - .ytrans = -150, -#else - .xscale = 84, - .xtrans = -150, - .yscale = 66, - .ytrans = -146, -#endif -}; - - -static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs) -{ -//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD)); - wake_up(&pendown_wait); -} - -static int ts_thread(void *id) -{ - static int pen_was_down = 0; - static DOWN_EVENT pen_xy; - long x, y, z; - void *ts; /* handle */ - struct task_struct *tsk = current; - int timeout = HZ / SAMPLE_RATE; - - ts_task = tsk; - - daemonize(); - tsk->tty = NULL; - tsk->policy = SCHED_FIFO; - tsk->rt_priority = 1; - strcpy(tsk->comm, "touchscreen"); - - /* only want to receive SIGKILL */ - spin_lock_irq(&tsk->sigmask_lock); - siginitsetinv(&tsk->blocked, sigmask(SIGKILL)); - recalc_sigpending(tsk); - spin_unlock_irq(&tsk->sigmask_lock); - - /* get handle for codec */ - ts = wm97xx_ts_get_handle(0); - - /* proceed only after everybody is ready */ - wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4); - - /* board-specific calibration */ - wm97xx_ts_set_cal(ts, - mirage_ts_cal.xscale, - mirage_ts_cal.xtrans, - mirage_ts_cal.yscale, - mirage_ts_cal.ytrans); - - /* route Wolfson pendown interrupts to our GPIO */ - au_sync(); - wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008); - au_sync(); - wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008); - au_sync(); - wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008); - au_sync(); - - for (;;) { - interruptible_sleep_on_timeout(&pendown_wait, timeout); - disable_irq(PEN_DOWN_IRQ); - if (signal_pending(tsk)) { - break; - } - - /* read codec */ - if (!wm97xx_ts_read_data(ts, &x, &y, &z)) - z = 0; /* treat no-data and pen-up the same */ - - if (signal_pending(tsk)) { - break; - } - - if (z >= release_pressure) { - y = ~y; /* top to bottom */ - if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX - /* bounce ? */ - x = pen_xy.x; - y = pen_xy.y; - --pen_was_down; - } else if (pen_was_down <= 1) { - pen_xy.x = x; - pen_xy.y = y; - if (pen_was_down) - wm97xx_ts_send_data(ts, x, y, z); - pen_was_down = PEN_DEBOUNCE; - } - //wm97xx_ts_send_data(ts, x, y, z); - timeout = HZ / SAMPLE_RATE; - } else { - if (pen_was_down) { - if (--pen_was_down) - z = release_pressure; - else //THXXX - wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z); - } - /* The pendown signal takes some time to settle after - * reading the pen pressure so wait a little - * before enabling the pen. - */ - if (! pen_was_down) { -// interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE); - timeout = HZ * PEN_UP_TIMEOUT; - } - } - enable_irq(PEN_DOWN_IRQ); - } - enable_irq(PEN_DOWN_IRQ); - ts_task = NULL; - complete(&ts_complete); - return 0; -} - -static int __init ts_mirage_init(void) -{ - int ret; - - /* pen down signal is connected to GPIO 7 */ - - ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL); - if (ret) { - err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret); - return ret; - } - - lock_kernel(); - ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES); - if (ret < 0) { - unlock_kernel(); - return ret; - } - unlock_kernel(); - - info("Mirage touchscreen IRQ initialized."); - - return 0; -} - -static void __exit ts_mirage_exit(void) -{ - if (ts_task) { - send_sig(SIGKILL, ts_task, 1); - wait_for_completion(&ts_complete); - } - - free_irq(PEN_DOWN_IRQ, NULL); -} - -module_init(ts_mirage_init); -module_exit(ts_mirage_exit); - diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c index bbb4ea43da8..cc1ce77eab4 100644 --- a/arch/mips/basler/excite/excite_device.c +++ b/arch/mips/basler/excite/excite_device.c @@ -68,7 +68,7 @@ enum { static struct resource - excite_ctr_resource = { + excite_ctr_resource __attribute__((unused)) = { .name = "GPI counters", .start = 0, .end = 5, @@ -77,7 +77,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_gpislice_resource = { + excite_gpislice_resource __attribute__((unused)) = { .name = "GPI slices", .start = 0, .end = 1, @@ -86,7 +86,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_mdio_channel_resource = { + excite_mdio_channel_resource __attribute__((unused)) = { .name = "MDIO channels", .start = 0, .end = 1, @@ -95,7 +95,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_fifomem_resource = { + excite_fifomem_resource __attribute__((unused)) = { .name = "FIFO memory", .start = 0, .end = 767, @@ -104,7 +104,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_scram_resource = { + excite_scram_resource __attribute__((unused)) = { .name = "Scratch RAM", .start = EXCITE_PHYS_SCRAM, .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, @@ -113,7 +113,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_fpga_resource = { + excite_fpga_resource __attribute__((unused)) = { .name = "System FPGA", .start = EXCITE_PHYS_FPGA, .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, @@ -122,7 +122,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_nand_resource = { + excite_nand_resource __attribute__((unused)) = { .name = "NAND flash control", .start = EXCITE_PHYS_NAND, .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, @@ -131,7 +131,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_titan_resource = { + excite_titan_resource __attribute__((unused)) = { .name = "TITAN registers", .start = EXCITE_PHYS_TITAN, .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, diff --git a/arch/mips/basler/excite/excite_fpga.h b/arch/mips/basler/excite/excite_fpga.h deleted file mode 100644 index 38fcda703a0..00000000000 --- a/arch/mips/basler/excite/excite_fpga.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef EXCITE_FPGA_H_INCLUDED -#define EXCITE_FPGA_H_INCLUDED - - -/** - * Adress alignment of the individual FPGA bytes. - * The address arrangement of the individual bytes of the FPGA is two - * byte aligned at the embedded MK2 platform. - */ -#ifdef EXCITE_CCI_FPGA_MK2 -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); -#else -typedef unsigned char excite_cci_fpga_align_t; -#endif - - -/** - * Size of Dual Ported RAM. - */ -#define EXCITE_DPR_SIZE 263 - - -/** - * Size of Reserved Status Fields in Dual Ported RAM. - */ -#define EXCITE_DPR_STATUS_SIZE 7 - - - -/** - * FPGA. - * Hardware register layout of the FPGA interface. The FPGA must accessed - * byte wise solely. - * @see EXCITE_CCI_DPR_MK2 - */ -typedef struct excite_fpga { - - /** - * Dual Ported RAM. - */ - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; - - /** - * Status. - */ - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; - -#ifdef EXCITE_CCI_FPGA_MK2 - /** - * RM9000 Interrupt. - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. - */ - excite_cci_fpga_align_t rm9k_int; -#else - /** - * MK2 Interrupt. - * Write access initiates interrupt at the ARM processor of the MK2. - */ - excite_cci_fpga_align_t mk2_int; - - excite_cci_fpga_align_t gap[0x1000-0x10f]; - - /** - * IRQ Source/Acknowledge. - */ - excite_cci_fpga_align_t rm9k_irq_src; - - /** - * IRQ Mask. - * Set bits enable the related interrupt. - */ - excite_cci_fpga_align_t rm9k_irq_mask; -#endif - - -} excite_fpga; - - - -#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 54274065e9a..d3705284de3 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -1193,7 +1192,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 887fd959482..e12a475dcbf 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index a01344f3a4c..bfade9abb76 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index c95682445a2..4baf2ff1128 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -828,7 +827,7 @@ CONFIG_FUSE_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index c2f33d3af62..93cca1585bc 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 8c44d16ae9a..ffd99252a83 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index c13768e75ac..63eac5e89b9 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 8aea73fae7f..25a095f7dc4 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 90ccb735963..dda469c842b 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index b598cf08f15..fcd3dd19bc7 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 597150b1407..8683e0df12e 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index fa2996bb4b7..4ace61c9577 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:02 2006 +# Linux kernel version: 2.6.18-rc2 +# Tue Jul 25 23:15:03 2006 # CONFIG_MIPS=y @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -227,7 +226,6 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -254,7 +252,6 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -284,6 +281,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -643,6 +641,7 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -650,7 +649,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M" +CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" # # Security options diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 375b2ac24a4..5847c916c13 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index b0afc118bd5..bc4c4f125c4 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MIPS_EV64120=y -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 045ebd08989..eb87cbbfd03 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -26,7 +26,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index ef16d1fb507..cc9b24eda9e 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -1013,7 +1012,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 4bf1ee7f5f0..50092ba8aa7 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -900,7 +899,7 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index f83dc09c3ca..dec2ba6ba03 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index a91d72a9ca8..37f9dd7187b 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set CONFIG_MIPS_ITE8172=y # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index cebc67212d0..18874a4c24f 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set CONFIG_MIPS_IVR=y # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 5d9eb11aba3..9f1e3048d62 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -731,7 +730,7 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index be45a9044d0..fded3f73815 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 64dc9f45a19..320b8cdd6e5 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -905,7 +904,7 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 2690baf15a8..0ba1ef5048f 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -1230,7 +1229,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index c298979c18a..adbeeadddb8 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 938b38ab523..79fd544fcb2 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:15 2006 +# Linux kernel version: 2.6.18-rc2 +# Tue Jul 25 23:16:46 2006 # CONFIG_MIPS=y @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -71,7 +70,6 @@ CONFIG_MACH_VR41XX=y CONFIG_VICTOR_MPC30X=y # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y -CONFIG_VRC4173=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -168,6 +166,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set @@ -841,7 +840,7 @@ CONFIG_USB_PEGASUS=m # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set @@ -982,7 +981,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1007,6 +1005,7 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1014,7 +1013,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=32M console=ttyVR0,19200" +CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" # # Security options diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index ec5758f2267..4d87da2b99f 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index 0d33d87de1a..a7ac2b0a827 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -774,7 +773,7 @@ CONFIG_FUSE_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 4b999102715..853e7bba512 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -723,7 +722,7 @@ CONFIG_FUSE_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index 827b344f601..8524efa23a4 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -777,7 +776,7 @@ CONFIG_FUSE_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 9ed60fef69e..1a16e92900c 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 6774254b1be..9ea8edea6f2 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 1afe5bf6e76..c4a158976f8 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index ac616c82d34..1cbf270c301 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index a8eb51bae3f..bec30b15b9b 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 6a63a113b7e..f5f799e9370 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -687,7 +686,7 @@ CONFIG_FUSE_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 6779f449bd2..2f5650227ba 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index b7826d3a2b7..4fee90b2b10 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -1442,7 +1441,7 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 625c1c619b6..9041f095f96 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 4401b602118..02abb2f1bfa 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 2ba4e25e8c3..ca3d0c4ba15 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index fc8a407c1ad..4e2009ace27 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index effcb63b81a..535a813d01a 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 4891d02ef8c..3a3ef20b21c 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:21 2006 +# Linux kernel version: 2.6.18-rc2 +# Tue Jul 25 23:13:04 2006 # CONFIG_MIPS=y @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -166,6 +165,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set @@ -379,6 +379,7 @@ CONFIG_CONNECTOR=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -855,7 +856,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -880,6 +880,7 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -887,7 +888,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M" +CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" # # Security options diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 3e4b16b3982..e6b1dea5584 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 3a68d8a25b6..06a072b77b1 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/defconfig b/arch/mips/defconfig index fff6fcc9621..cc9b24eda9e 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 09:49:33 2006 +# Thu Jul 6 10:04:10 2006 # CONFIG_MIPS=y @@ -25,7 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set @@ -1013,7 +1012,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set diff --git a/arch/mips/galileo-boards/ev96100/Makefile b/arch/mips/galileo-boards/ev96100/Makefile deleted file mode 100644 index cd868ec78cb..00000000000 --- a/arch/mips/galileo-boards/ev96100/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com -# -# Makefile for the Galileo EV96100 board. -# - -obj-y += init.o irq.o puts.o reset.o time.o setup.o diff --git a/arch/mips/galileo-boards/ev96100/init.c b/arch/mips/galileo-boards/ev96100/init.c deleted file mode 100644 index a01fe9b36f2..00000000000 --- a/arch/mips/galileo-boards/ev96100/init.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/generic/generic.c - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/gt64120.h> - - -/* Environment variable */ - -typedef struct { - char *name; - char *val; -} t_env_var; - -int prom_argc; -char **prom_argv, **prom_envp; - -int init_debug = 0; - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -unsigned long __init prom_free_prom_memory(void) -{ - return 0; -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - */ - - t_env_var *env = (t_env_var *) prom_envp; - int i; - - i = strlen(envname); - - while (env->name) { - if (strncmp(envname, env->name, i) == 0) { - return (env->val); - } - env++; - } - return (NULL); -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -static inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if ((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - - if (init_debug > 1) { - int i; - printk("get_ethernet_addr: "); - for (i = 0; i < 5; i++) - printk("%02x:", - (unsigned char) *(ethernet_addr + i)); - printk("%02x\n", *(ethernet_addr + i)); - } - - return 0; -} - -const char *get_system_type(void) -{ - return "Galileo EV96100"; -} - -void __init prom_init(void) -{ - volatile unsigned char *uart; - char ppbuf[8]; - - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - - mips_machgroup = MACH_GROUP_GALILEO; - mips_machtype = MACH_EV96100; - - prom_init_cmdline(); - - /* 32 MB upgradable */ - add_memory_region(0, 32 << 20, BOOT_MEM_RAM); -} diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c deleted file mode 100644 index ee5d6720f23..00000000000 --- a/arch/mips/galileo-boards/ev96100/irq.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/atlas/atlas_int.c. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <asm/irq_cpu.h> - -static inline unsigned int ffz8(unsigned int word) -{ - unsigned long k; - - k = 7; - if (word & 0x0fUL) { k -= 4; word <<= 4; } - if (word & 0x30UL) { k -= 2; word <<= 2; } - if (word & 0x40UL) { k -= 1; } - - return k; -} - -extern void mips_timer_interrupt(struct pt_regs *regs); - -asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs) -{ - do_IRQ(ffz8(pending >> 8), regs); -} - -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - - if (pending & CAUSEF_IP7) - mips_timer_interrupt(regs); - else if (pending) - ev96100_cpu_irq(pending, regs); - else - spurious_interrupt(regs); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(0); -} diff --git a/arch/mips/galileo-boards/ev96100/puts.c b/arch/mips/galileo-boards/ev96100/puts.c deleted file mode 100644 index 49dc6d137b9..00000000000 --- a/arch/mips/galileo-boards/ev96100/puts.c +++ /dev/null @@ -1,138 +0,0 @@ - -/* - * Debug routines which directly access the uart. - */ - -#include <linux/types.h> -#include <asm/gt64120.h> - - -//#define SERIAL_BASE EV96100_UART0_REGS_BASE -#define SERIAL_BASE 0xBD000020 -#define NS16550_BASE SERIAL_BASE - -#define SERA_CMD 0x0D -#define SERA_DATA 0x08 -//#define SERB_CMD 0x05 -#define SERB_CMD 20 -#define SERB_DATA 0x00 -#define TX_BUSY 0x20 - -#define TIMEOUT 0xffff -#undef SLOW_DOWN - -static const char digits[16] = "0123456789abcdef"; -static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE; - - -#ifdef SLOW_DOWN -static inline void slow_down() -{ - int k; - for (k = 0; k < 10000; k++); -} -#else -#define slow_down() -#endif - -void putch(const unsigned char c) -{ - unsigned char ch; - int i = 0; - - do { - ch = com1[SERB_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SERB_DATA] = c; -} - -void putchar(const unsigned char c) -{ - unsigned char ch; - int i = 0; - - do { - ch = com1[SERB_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SERB_DATA] = c; -} - -void puts(unsigned char *cp) -{ - unsigned char ch; - int i = 0; - - while (*cp) { - do { - ch = com1[SERB_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SERB_DATA] = *cp++; - } - putch('\r'); - putch('\n'); -} - -void fputs(unsigned char *cp) -{ - unsigned char ch; - int i = 0; - - while (*cp) { - - do { - ch = com1[SERB_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SERB_DATA] = *cp++; - } -} - - -void put64(uint64_t ul) -{ - int cnt; - unsigned ch; - - cnt = 16; /* 16 nibbles in a 64 bit long */ - putch('0'); - putch('x'); - do { - cnt--; - ch = (unsigned char) (ul >> cnt * 4) & 0x0F; - putch(digits[ch]); - } while (cnt > 0); -} - -void put32(unsigned u) -{ - int cnt; - unsigned ch; - - cnt = 8; /* 8 nibbles in a 32 bit long */ - putch('0'); - putch('x'); - do { - cnt--; - ch = (unsigned char) (u >> cnt * 4) & 0x0F; - putch(digits[ch]); - } while (cnt > 0); -} diff --git a/arch/mips/galileo-boards/ev96100/reset.c b/arch/mips/galileo-boards/ev96100/reset.c deleted file mode 100644 index 5ef9b7f896e..00000000000 --- a/arch/mips/galileo-boards/ev96100/reset.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Galileo EV96100 reset routines. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/generic/reset.c - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <asm/gt64120.h> - -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - -static void mips_machine_restart(char *command) -{ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); - while (1); -} - -static void mips_machine_halt(void) -{ - printk(KERN_NOTICE "You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void mips_reboot_setup(void) -{ - _machine_restart = mips_machine_restart; - _machine_halt = mips_machine_halt; -} diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c deleted file mode 100644 index 639ad5562c6..00000000000 --- a/arch/mips/galileo-boards/ev96100/setup.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Galileo EV96100 setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/atlas/atlas_setup.c. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/pci.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/mipsregs.h> -#include <asm/irq.h> -#include <asm/delay.h> -#include <asm/gt64120.h> -#include <asm/galileo-boards/ev96100int.h> - - -extern char *__init prom_getcmdline(void); - -extern void mips_reboot_setup(void); - -unsigned char mac_0_1[12]; - -void __init plat_mem_setup(void) -{ - unsigned int config = read_c0_config(); - unsigned int status = read_c0_status(); - unsigned int info = read_c0_info(); - u32 tmp; - - char *argptr; - - clear_c0_status(ST0_FR); - - if (config & 0x8) - printk("Secondary cache is enabled\n"); - else - printk("Secondary cache is disabled\n"); - - if (status & (1 << 27)) - printk("User-mode cache ops enabled\n"); - else - printk("User-mode cache ops disabled\n"); - - printk("CP0 info reg: %x\n", (unsigned) info); - if (info & (1 << 28)) - printk("burst mode Scache RAMS\n"); - else - printk("pipelined Scache RAMS\n"); - - if (info & 0x1) - printk("Atomic Enable is set\n"); - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_CONSOLE - if (strstr(argptr, "console=") == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - - mips_reboot_setup(); - - set_io_port_base(KSEG1); - ioport_resource.start = GT_PCI_IO_BASE; - ioport_resource.end = GT_PCI_IO_BASE + 0x01ffffff; - -#ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); -#endif - - - /* - * Setup GT controller master bit so we can do config cycles - */ - - /* Clear cause register bits */ - GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | - GT_INTRCAUSE_TARABORT0_BIT)); - /* Setup address */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - udelay(2); - tmp = GT_READ(GT_PCI0_CFGDATA_OFS); - - tmp |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_SERR); - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - udelay(2); - GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp); - - /* Setup address */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - udelay(2); - tmp = GT_READ(GT_PCI0_CFGDATA_OFS); -} - -unsigned short get_gt_devid(void) -{ - u32 gt_devid; - - /* Figure out if this is a gt96100 or gt96100A */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_VENDOR_ID / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - udelay(4); - gt_devid = GT_READ(GT_PCI0_CFGDATA_OFS); - - return gt_devid >> 16; -} diff --git a/arch/mips/galileo-boards/ev96100/time.c b/arch/mips/galileo-boards/ev96100/time.c deleted file mode 100644 index 8cbe8426491..00000000000 --- a/arch/mips/galileo-boards/ev96100/time.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Galileo EV96100 rtc routines. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/atlas/atlas_rtc.c. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/timex.h> - -#include <asm/mipsregs.h> -#include <asm/ptrace.h> -#include <asm/time.h> - - -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) - -extern volatile unsigned long wall_jiffies; -unsigned long missed_heart_beats = 0; - -static unsigned long r4k_offset; /* Amount to increment compare reg each time */ -static unsigned long r4k_cur; /* What counter should be at next timer irq */ - -static inline void ack_r4ktimer(unsigned long newval) -{ - write_c0_compare(newval); -} - -/* - * There are a lot of conceptually broken versions of the MIPS timer interrupt - * handler floating around. This one is rather different, but the algorithm - * is probably more robust. - */ -void mips_timer_interrupt(struct pt_regs *regs) -{ - int irq = 7; /* FIX ME */ - - if (r4k_offset == 0) { - goto null; - } - - do { - kstat_this_cpu.irqs[irq]++; - do_timer(regs); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - r4k_cur += r4k_offset; - ack_r4ktimer(r4k_cur); - - } while (((unsigned long)read_c0_count() - - r4k_cur) < 0x7fffffff); - return; - -null: - ack_r4ktimer(0); -} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index aa2caa67299..9fbf8430c84 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -38,15 +38,40 @@ static void r3081_wait(void) static void r39xx_wait(void) { - unsigned long cfg = read_c0_conf(); - write_c0_conf(cfg | TX39_CONF_HALT); + local_irq_disable(); + if (!need_resched()) + write_c0_conf(read_c0_conf() | TX39_CONF_HALT); + local_irq_enable(); } +/* + * There is a race when WAIT instruction executed with interrupt + * enabled. + * But it is implementation-dependent wheter the pipelie restarts when + * a non-enabled interrupt is requested. + */ static void r4k_wait(void) { - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); + __asm__(" .set mips3 \n" + " wait \n" + " .set mips0 \n"); +} + +/* + * This variant is preferable as it allows testing need_resched and going to + * sleep depending on the outcome atomically. Unfortunately the "It is + * implementation-dependent whether the pipeline restarts when a non-enabled + * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes + * using this version a gamble. + */ +static void r4k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__(" .set mips3 \n" + " wait \n" + " .set mips0 \n"); + local_irq_enable(); } /* The Au1xxx wait is available only if using 32khz counter or @@ -56,17 +81,17 @@ int allow_au1k_wait; static void au1k_wait(void) { /* using the wait instruction makes CP0 counter unusable */ - __asm__(".set mips3\n\t" - "cache 0x14, 0(%0)\n\t" - "cache 0x14, 32(%0)\n\t" - "sync\n\t" - "nop\n\t" - "wait\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - ".set mips0\n\t" + __asm__(" .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" : : "r" (au1k_wait)); } @@ -111,7 +136,6 @@ static inline void check_wait(void) case CPU_NEVADA: case CPU_RM7000: case CPU_RM9000: - case CPU_TX49XX: case CPU_4KC: case CPU_4KEC: case CPU_4KSC: @@ -125,6 +149,10 @@ static inline void check_wait(void) cpu_wait = r4k_wait; printk(" available.\n"); break; + case CPU_TX49XX: + cpu_wait = r4k_wait_irqoff; + printk(" available.\n"); + break; case CPU_AU1000: case CPU_AU1100: case CPU_AU1500: diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 676e868d26f..2132485caa7 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -17,6 +17,7 @@ #include <asm/ptrace.h> #include <asm/uaccess.h> +#include <asm/unistd.h> #undef DEBUG_SIG @@ -172,11 +173,12 @@ static inline int handle_signal(unsigned long sig, siginfo_t *info, return ret; } -asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) +void do_irix_signal(struct pt_regs *regs) { struct k_sigaction ka; siginfo_t info; int signr; + sigset_t *oldset; /* * We want the common case to go fast, which is why we may in certain @@ -184,19 +186,28 @@ asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) * if so. */ if (!user_mode(regs)) - return 1; + return; - if (try_to_freeze()) - goto no_signal; - - if (!oldset) + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) - return handle_signal(signr, &info, &ka, oldset, regs); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + + return; + } -no_signal: /* * Who's code doesn't conform to the restartable syscall convention * dies here!!! The li instruction, a single machine instruction, @@ -208,8 +219,22 @@ no_signal: regs->regs[2] == ERESTARTNOINTR) { regs->cp0_epc -= 8; } + if (regs->regs[2] == ERESTART_RESTARTBLOCK) { + regs->regs[2] = __NR_restart_syscall; + regs->regs[7] = regs->regs[26]; + regs->cp0_epc -= 4; + } + regs->regs[0] = 0; /* Don't deal with this again. */ + } + + /* + * If there's no signal to deliver, we just put the saved sigmask + * back + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } - return 0; } asmlinkage void @@ -298,6 +323,9 @@ struct sigact_irix5 { int _unused0[2]; }; +#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility: + set only the low 32 bit of the sigset. */ + #ifdef DEBUG_SIG static inline void dump_sigact_irix5(struct sigact_irix5 *p) { @@ -413,7 +441,7 @@ asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new, asmlinkage int irix_sigsuspend(struct pt_regs *regs) { - sigset_t saveset, newset; + sigset_t newset; sigset_t __user *uset; uset = (sigset_t __user *) regs->regs[4]; @@ -422,18 +450,15 @@ asmlinkage int irix_sigsuspend(struct pt_regs *regs) sigdelsetmask(&newset, ~_BLOCKABLE); spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; + current->saved_sigmask = current->blocked; current->blocked = newset; recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs->regs[2] = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_irix_signal(&saveset, regs)) - return -EINTR; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } /* hate hate hate... */ diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 450ac592da5..43b1162d714 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -991,7 +991,7 @@ struct sysctl_args32 unsigned int __unused[4]; }; -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SYSCTL_SYSCALL asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) { @@ -1032,7 +1032,7 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) return error; } -#endif /* CONFIG_SYSCTL */ +#endif /* CONFIG_SYSCTL_SYSCALL */ asmlinkage long sys32_newuname(struct new_utsname __user * name) { @@ -1296,9 +1296,3 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } - -extern asmlinkage void sys_set_thread_area(u32 addr); -asmlinkage void sys32_set_thread_area(u32 addr) -{ - sys_set_thread_area(AA(addr)); -} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 7ab67f786bf..2613a0dd4b8 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -273,104 +273,107 @@ long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } -static struct mips_frame_info { - void *func; - unsigned long func_size; - int frame_size; - int pc_offset; -} *schedule_frame, mfinfo[64]; -static int mfinfo_num; - -static int __init get_frame_info(struct mips_frame_info *info) +/* + * + */ +struct mips_frame_info { + void *func; + unsigned long func_size; + int frame_size; + int pc_offset; +}; + +static inline int is_ra_save_ins(union mips_instruction *ip) { - int i; - void *func = info->func; - union mips_instruction *ip = (union mips_instruction *)func; + /* sw / sd $ra, offset($sp) */ + return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op) && + ip->i_format.rs == 29 && + ip->i_format.rt == 31; +} + +static inline int is_jal_jalr_jr_ins(union mips_instruction *ip) +{ + if (ip->j_format.opcode == jal_op) + return 1; + if (ip->r_format.opcode != spec_op) + return 0; + return ip->r_format.func == jalr_op || ip->r_format.func == jr_op; +} + +static inline int is_sp_move_ins(union mips_instruction *ip) +{ + /* addiu/daddiu sp,sp,-imm */ + if (ip->i_format.rs != 29 || ip->i_format.rt != 29) + return 0; + if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op) + return 1; + return 0; +} + +static int get_frame_info(struct mips_frame_info *info) +{ + union mips_instruction *ip = info->func; + unsigned max_insns = info->func_size / sizeof(union mips_instruction); + unsigned i; + info->pc_offset = -1; info->frame_size = 0; - for (i = 0; i < 128; i++, ip++) { - /* if jal, jalr, jr, stop. */ - if (ip->j_format.opcode == jal_op || - (ip->r_format.opcode == spec_op && - (ip->r_format.func == jalr_op || - ip->r_format.func == jr_op))) - break; - if (info->func_size && i >= info->func_size / 4) + if (!ip) + goto err; + + if (max_insns == 0) + max_insns = 128U; /* unknown function size */ + max_insns = min(128U, max_insns); + + for (i = 0; i < max_insns; i++, ip++) { + + if (is_jal_jalr_jr_ins(ip)) break; - if ( -#ifdef CONFIG_32BIT - ip->i_format.opcode == addiu_op && -#endif -#ifdef CONFIG_64BIT - ip->i_format.opcode == daddiu_op && -#endif - ip->i_format.rs == 29 && - ip->i_format.rt == 29) { - /* addiu/daddiu sp,sp,-imm */ - if (info->frame_size) - continue; - info->frame_size = - ip->i_format.simmediate; + if (!info->frame_size) { + if (is_sp_move_ins(ip)) + info->frame_size = - ip->i_format.simmediate; + continue; } - - if ( -#ifdef CONFIG_32BIT - ip->i_format.opcode == sw_op && -#endif -#ifdef CONFIG_64BIT - ip->i_format.opcode == sd_op && -#endif - ip->i_format.rs == 29 && - ip->i_format.rt == 31) { - /* sw / sd $ra, offset($sp) */ - if (info->pc_offset != -1) - continue; + if (info->pc_offset == -1 && is_ra_save_ins(ip)) { info->pc_offset = ip->i_format.simmediate / sizeof(long); + break; } } - if (info->pc_offset == -1 || info->frame_size == 0) { - if (func == schedule) - printk("Can't analyze prologue code at %p\n", func); - info->pc_offset = -1; - info->frame_size = 0; - } - - return 0; + if (info->frame_size && info->pc_offset >= 0) /* nested */ + return 0; + if (info->pc_offset < 0) /* leaf */ + return 1; + /* prologue seems boggus... */ +err: + return -1; } +static struct mips_frame_info schedule_mfi __read_mostly; + static int __init frame_info_init(void) { - int i; + unsigned long size = 0; #ifdef CONFIG_KALLSYMS + unsigned long ofs; char *modname; char namebuf[KSYM_NAME_LEN + 1]; - unsigned long start, size, ofs; - extern char __sched_text_start[], __sched_text_end[]; - extern char __lock_text_start[], __lock_text_end[]; - - start = (unsigned long)__sched_text_start; - for (i = 0; i < ARRAY_SIZE(mfinfo); i++) { - if (start == (unsigned long)schedule) - schedule_frame = &mfinfo[i]; - if (!kallsyms_lookup(start, &size, &ofs, &modname, namebuf)) - break; - mfinfo[i].func = (void *)(start + ofs); - mfinfo[i].func_size = size; - start += size - ofs; - if (start >= (unsigned long)__lock_text_end) - break; - if (start == (unsigned long)__sched_text_end) - start = (unsigned long)__lock_text_start; - } -#else - mfinfo[0].func = schedule; - schedule_frame = &mfinfo[0]; + + kallsyms_lookup((unsigned long)schedule, &size, &ofs, &modname, namebuf); #endif - for (i = 0; i < ARRAY_SIZE(mfinfo) && mfinfo[i].func; i++) - get_frame_info(&mfinfo[i]); + schedule_mfi.func = schedule; + schedule_mfi.func_size = size; + + get_frame_info(&schedule_mfi); + + /* + * Without schedule() frame info, result given by + * thread_saved_pc() and get_wchan() are not reliable. + */ + if (schedule_mfi.pc_offset < 0) + printk("Can't analyze schedule() prologue at %p\n", schedule); - mfinfo_num = i; return 0; } @@ -386,54 +389,86 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* New born processes are a special case */ if (t->reg31 == (unsigned long) ret_from_fork) return t->reg31; - - if (!schedule_frame || schedule_frame->pc_offset < 0) + if (schedule_mfi.pc_offset < 0) return 0; - return ((unsigned long *)t->reg29)[schedule_frame->pc_offset]; + return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; } -/* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */ -unsigned long get_wchan(struct task_struct *p) + +#ifdef CONFIG_KALLSYMS +/* used by show_backtrace() */ +unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, + unsigned long pc, unsigned long ra) { unsigned long stack_page; - unsigned long pc; -#ifdef CONFIG_KALLSYMS - unsigned long frame; -#endif + struct mips_frame_info info; + char *modname; + char namebuf[KSYM_NAME_LEN + 1]; + unsigned long size, ofs; + int leaf; - if (!p || p == current || p->state == TASK_RUNNING) + stack_page = (unsigned long)task_stack_page(task); + if (!stack_page) return 0; - stack_page = (unsigned long)task_stack_page(p); - if (!stack_page || !mfinfo_num) + if (!kallsyms_lookup(pc, &size, &ofs, &modname, namebuf)) + return 0; + /* + * Return ra if an exception occured at the first instruction + */ + if (unlikely(ofs == 0)) + return ra; + + info.func = (void *)(pc - ofs); + info.func_size = ofs; /* analyze from start to ofs */ + leaf = get_frame_info(&info); + if (leaf < 0) + return 0; + + if (*sp < stack_page || + *sp + info.frame_size > stack_page + THREAD_SIZE - 32) return 0; - pc = thread_saved_pc(p); + if (leaf) + /* + * For some extreme cases, get_frame_info() can + * consider wrongly a nested function as a leaf + * one. In that cases avoid to return always the + * same value. + */ + pc = pc != ra ? ra : 0; + else + pc = ((unsigned long *)(*sp))[info.pc_offset]; + + *sp += info.frame_size; + return __kernel_text_address(pc) ? pc : 0; +} +#endif + +/* + * get_wchan - a maintenance nightmare^W^Wpain in the ass ... + */ +unsigned long get_wchan(struct task_struct *task) +{ + unsigned long pc = 0; #ifdef CONFIG_KALLSYMS - if (!in_sched_functions(pc)) - return pc; + unsigned long sp; +#endif - frame = p->thread.reg29 + schedule_frame->frame_size; - do { - int i; + if (!task || task == current || task->state == TASK_RUNNING) + goto out; + if (!task_stack_page(task)) + goto out; - if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32) - return 0; + pc = thread_saved_pc(task); - for (i = mfinfo_num - 1; i >= 0; i--) { - if (pc >= (unsigned long) mfinfo[i].func) - break; - } - if (i < 0) - break; +#ifdef CONFIG_KALLSYMS + sp = task->thread.reg29 + schedule_mfi.frame_size; - pc = ((unsigned long *)frame)[mfinfo[i].pc_offset]; - if (!mfinfo[i].frame_size) - break; - frame += mfinfo[i].frame_size; - } while (in_sched_functions(pc)); + while (in_sched_functions(pc)) + pc = unwind_stack(task, &sp, pc, 0); #endif +out: return pc; } - diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index ba1bcd83c7d..e7178510220 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -662,6 +662,8 @@ einval: li v0, -EINVAL sys sys_tee 4 sys sys_vmsplice 4 sys sys_move_pages 6 + sys sys_set_robust_list 2 + sys sys_get_robust_list 3 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 939e172db95..4c22d0b4825 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -466,3 +466,5 @@ sys_call_table: PTR sys_tee /* 5265 */ PTR sys_vmsplice PTR sys_move_pages + PTR sys_set_robust_list + PTR sys_get_robust_list diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 98abbc5a9f1..f25c2a2f103 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -247,7 +247,7 @@ EXPORT(sysn32_call_table) PTR sys_capset PTR sys32_rt_sigpending /* 6125 */ PTR compat_sys_rt_sigtimedwait - PTR sys_rt_sigqueueinfo + PTR sys32_rt_sigqueueinfo PTR sysn32_rt_sigsuspend PTR sys32_sigaltstack PTR compat_sys_utime /* 6130 */ @@ -390,5 +390,7 @@ EXPORT(sysn32_call_table) PTR sys_splice PTR sys_sync_file_range PTR sys_tee - PTR sys_vmsplice /* 6271 */ + PTR sys_vmsplice /* 6270 */ PTR sys_move_pages + PTR compat_sys_set_robust_list + PTR compat_sys_get_robust_list diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 505c9ee5400..288ee4ac4db 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -498,7 +498,7 @@ sys_call_table: PTR sys_mknodat /* 4290 */ PTR sys_fchownat PTR compat_sys_futimesat - PTR compat_sys_newfstatat + PTR sys_newfstatat PTR sys_unlinkat PTR sys_renameat /* 4295 */ PTR sys_linkat @@ -514,4 +514,6 @@ sys_call_table: PTR sys_tee PTR sys_vmsplice PTR compat_sys_move_pages + PTR compat_sys_set_robust_list + PTR compat_sys_get_robust_list /* 4310 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 8c2b596a136..fdbb508661c 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -10,29 +10,15 @@ * Copyright (C) 1999 Silicon Graphics, Inc. * Copyright (C) 2000 2001, 2002 Maciej W. Rozycki */ -#include <linux/errno.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> #include <linux/module.h> -#include <linux/stddef.h> -#include <linux/string.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/utsname.h> -#include <linux/a.out.h> #include <linux/screen_info.h> #include <linux/bootmem.h> #include <linux/initrd.h> -#include <linux/major.h> -#include <linux/kdev_t.h> #include <linux/root_dev.h> #include <linux/highmem.h> #include <linux/console.h> -#include <linux/mmzone.h> #include <linux/pfn.h> #include <asm/addrspace.h> @@ -96,6 +82,12 @@ void __init add_memory_region(phys_t start, phys_t size, long type) int x = boot_mem_map.nr_map; struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1; + /* Sanity check */ + if (start + size < start) { + printk("Trying to add an invalid memory region, skipped\n"); + return; + } + /* * Try to merge with previous entry if any. This is far less than * perfect but is sufficient for most real world cases. @@ -143,167 +135,132 @@ static void __init print_memory_map(void) } } -static inline void parse_cmdline_early(void) +/* + * Manage initrd + */ +#ifdef CONFIG_BLK_DEV_INITRD + +static int __init rd_start_early(char *p) { - char c = ' ', *to = command_line, *from = saved_command_line; - unsigned long start_at, mem_size; - int len = 0; - int usermem = 0; + unsigned long start = memparse(p, &p); - printk("Determined physical RAM map:\n"); - print_memory_map(); +#ifdef CONFIG_64BIT + /* HACK: Guess if the sign extension was forgotten */ + if (start > 0x0000000080000000 && start < 0x00000000ffffffff) + start |= 0xffffffff00000000UL; +#endif + initrd_start = start; + initrd_end += start; - for (;;) { - /* - * "mem=XXX[kKmM]" defines a memory region from - * 0 to <XXX>, overriding the determined size. - * "mem=XXX[KkmM]@YYY[KkmM]" defines a memory region from - * <YYY> to <YYY>+<XXX>, overriding the determined size. - */ - if (c == ' ' && !memcmp(from, "mem=", 4)) { - if (to != command_line) - to--; - /* - * If a user specifies memory size, we - * blow away any automatically generated - * size. - */ - if (usermem == 0) { - boot_mem_map.nr_map = 0; - usermem = 1; - } - mem_size = memparse(from + 4, &from); - if (*from == '@') - start_at = memparse(from + 1, &from); - else - start_at = 0; - add_memory_region(start_at, mem_size, BOOT_MEM_RAM); - } - c = *(from++); - if (!c) - break; - if (CL_SIZE <= ++len) - break; - *(to++) = c; - } - *to = '\0'; + return 0; +} +early_param("rd_start", rd_start_early); - if (usermem) { - printk("User-defined physical RAM map:\n"); - print_memory_map(); - } +static int __init rd_size_early(char *p) +{ + initrd_end += memparse(p, &p); + + return 0; } +early_param("rd_size", rd_size_early); -static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_end) +static unsigned long __init init_initrd(void) { + unsigned long tmp, end, size; + u32 *initrd_header; + + ROOT_DEV = Root_RAM0; + /* - * "rd_start=0xNNNNNNNN" defines the memory address of an initrd - * "rd_size=0xNN" it's size + * Board specific code or command line parser should have + * already set up initrd_start and initrd_end. In these cases + * perfom sanity checks and use them if all looks good. */ - unsigned long start = 0; - unsigned long size = 0; - unsigned long end; - char cmd_line[CL_SIZE]; - char *start_str; - char *size_str; - char *tmp; - - strcpy(cmd_line, command_line); - *command_line = 0; - tmp = cmd_line; - /* Ignore "rd_start=" strings in other parameters. */ - start_str = strstr(cmd_line, "rd_start="); - if (start_str && start_str != cmd_line && *(start_str - 1) != ' ') - start_str = strstr(start_str, " rd_start="); - while (start_str) { - if (start_str != cmd_line) - strncat(command_line, tmp, start_str - tmp); - start = memparse(start_str + 9, &start_str); - tmp = start_str + 1; - start_str = strstr(start_str, " rd_start="); + size = initrd_end - initrd_start; + if (initrd_end == 0 || size == 0) { + initrd_start = 0; + initrd_end = 0; + } else + return initrd_end; + + end = (unsigned long)&_end; + tmp = PAGE_ALIGN(end) - sizeof(u32) * 2; + if (tmp < end) + tmp += PAGE_SIZE; + + initrd_header = (u32 *)tmp; + if (initrd_header[0] == 0x494E5244) { + initrd_start = (unsigned long)&initrd_header[2]; + initrd_end = initrd_start + initrd_header[1]; } - if (*tmp) - strcat(command_line, tmp); - - strcpy(cmd_line, command_line); - *command_line = 0; - tmp = cmd_line; - /* Ignore "rd_size" strings in other parameters. */ - size_str = strstr(cmd_line, "rd_size="); - if (size_str && size_str != cmd_line && *(size_str - 1) != ' ') - size_str = strstr(size_str, " rd_size="); - while (size_str) { - if (size_str != cmd_line) - strncat(command_line, tmp, size_str - tmp); - size = memparse(size_str + 8, &size_str); - tmp = size_str + 1; - size_str = strstr(size_str, " rd_size="); + return initrd_end; +} + +static void __init finalize_initrd(void) +{ + unsigned long size = initrd_end - initrd_start; + + if (size == 0) { + printk(KERN_INFO "Initrd not found or empty"); + goto disable; + } + if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) { + printk("Initrd extends beyond end of memory"); + goto disable; } - if (*tmp) - strcat(command_line, tmp); -#ifdef CONFIG_64BIT - /* HACK: Guess if the sign extension was forgotten */ - if (start > 0x0000000080000000 && start < 0x00000000ffffffff) - start |= 0xffffffff00000000UL; + reserve_bootmem(CPHYSADDR(initrd_start), size); + initrd_below_start_ok = 1; + + printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n", + initrd_start, size); + return; +disable: + printk(" - disabling initrd\n"); + initrd_start = 0; + initrd_end = 0; +} + +#else /* !CONFIG_BLK_DEV_INITRD */ + +#define init_initrd() 0 +#define finalize_initrd() do {} while (0) + #endif - end = start + size; - if (start && end) { - *rd_start = start; - *rd_end = end; - return 1; - } - return 0; +/* + * Initialize the bootmem allocator. It also setup initrd related data + * if needed. + */ +#ifdef CONFIG_SGI_IP27 + +static void __init bootmem_init(void) +{ + init_initrd(); + finalize_initrd(); } -#define MAXMEM HIGHMEM_START -#define MAXMEM_PFN PFN_DOWN(MAXMEM) +#else /* !CONFIG_SGI_IP27 */ -static inline void bootmem_init(void) +static void __init bootmem_init(void) { - unsigned long start_pfn; - unsigned long reserved_end = (unsigned long)&_end; -#ifndef CONFIG_SGI_IP27 - unsigned long first_usable_pfn; + unsigned long reserved_end; + unsigned long highest = 0; + unsigned long mapstart = -1UL; unsigned long bootmap_size; int i; -#endif -#ifdef CONFIG_BLK_DEV_INITRD - int initrd_reserve_bootmem = 0; - - /* Board specific code should have set up initrd_start and initrd_end */ - ROOT_DEV = Root_RAM0; - if (parse_rd_cmdline(&initrd_start, &initrd_end)) { - reserved_end = max(reserved_end, initrd_end); - initrd_reserve_bootmem = 1; - } else { - unsigned long tmp; - u32 *initrd_header; - - tmp = ((reserved_end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2; - if (tmp < reserved_end) - tmp += PAGE_SIZE; - initrd_header = (u32 *)tmp; - if (initrd_header[0] == 0x494E5244) { - initrd_start = (unsigned long)&initrd_header[2]; - initrd_end = initrd_start + initrd_header[1]; - reserved_end = max(reserved_end, initrd_end); - initrd_reserve_bootmem = 1; - } - } -#endif /* CONFIG_BLK_DEV_INITRD */ /* - * Partially used pages are not usable - thus - * we are rounding upwards. + * Init any data related to initrd. It's a nop if INITRD is + * not selected. Once that done we can determine the low bound + * of usable memory. */ - start_pfn = PFN_UP(CPHYSADDR(reserved_end)); + reserved_end = init_initrd(); + reserved_end = PFN_UP(CPHYSADDR(max(reserved_end, (unsigned long)&_end))); -#ifndef CONFIG_SGI_IP27 - /* Find the highest page frame number we have available. */ - max_pfn = 0; - first_usable_pfn = -1UL; + /* + * Find the highest page frame number we have available. + */ for (i = 0; i < boot_mem_map.nr_map; i++) { unsigned long start, end; @@ -312,56 +269,38 @@ static inline void bootmem_init(void) start = PFN_UP(boot_mem_map.map[i].addr); end = PFN_DOWN(boot_mem_map.map[i].addr - + boot_mem_map.map[i].size); + + boot_mem_map.map[i].size); - if (start >= end) + if (end > highest) + highest = end; + if (end <= reserved_end) continue; - if (end > max_pfn) - max_pfn = end; - if (start < first_usable_pfn) { - if (start > start_pfn) { - first_usable_pfn = start; - } else if (end > start_pfn) { - first_usable_pfn = start_pfn; - } - } + if (start >= mapstart) + continue; + mapstart = max(reserved_end, start); } /* * Determine low and high memory ranges */ - max_low_pfn = max_pfn; - if (max_low_pfn > MAXMEM_PFN) { - max_low_pfn = MAXMEM_PFN; -#ifndef CONFIG_HIGHMEM - /* Maximum memory usable is what is directly addressable */ - printk(KERN_WARNING "Warning only %ldMB will be used.\n", - MAXMEM >> 20); - printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); + if (highest > PFN_DOWN(HIGHMEM_START)) { +#ifdef CONFIG_HIGHMEM + highstart_pfn = PFN_DOWN(HIGHMEM_START); + highend_pfn = highest; #endif + highest = PFN_DOWN(HIGHMEM_START); } -#ifdef CONFIG_HIGHMEM /* - * Crude, we really should make a better attempt at detecting - * highstart_pfn + * Initialize the boot-time allocator with low memory only. */ - highstart_pfn = highend_pfn = max_pfn; - if (max_pfn > MAXMEM_PFN) { - highstart_pfn = MAXMEM_PFN; - printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", - (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT)); - } -#endif - - /* Initialize the boot-time allocator with low memory only. */ - bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn); + bootmap_size = init_bootmem(mapstart, highest); /* * Register fully available low RAM pages with the bootmem allocator. */ for (i = 0; i < boot_mem_map.nr_map; i++) { - unsigned long curr_pfn, last_pfn, size; + unsigned long start, end, size; /* * Reserve usable memory. @@ -369,85 +308,50 @@ static inline void bootmem_init(void) if (boot_mem_map.map[i].type != BOOT_MEM_RAM) continue; - /* - * We are rounding up the start address of usable memory: - */ - curr_pfn = PFN_UP(boot_mem_map.map[i].addr); - if (curr_pfn >= max_low_pfn) - continue; - if (curr_pfn < start_pfn) - curr_pfn = start_pfn; - - /* - * ... and at the end of the usable range downwards: - */ - last_pfn = PFN_DOWN(boot_mem_map.map[i].addr + start = PFN_UP(boot_mem_map.map[i].addr); + end = PFN_DOWN(boot_mem_map.map[i].addr + boot_mem_map.map[i].size); - - if (last_pfn > max_low_pfn) - last_pfn = max_low_pfn; - /* - * Only register lowmem part of lowmem segment with bootmem. + * We are rounding up the start address of usable memory + * and at the end of the usable range downwards. */ - size = last_pfn - curr_pfn; - if (curr_pfn > PFN_DOWN(HIGHMEM_START)) - continue; - if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START)) - size = PFN_DOWN(HIGHMEM_START) - curr_pfn; - if (!size) + if (start >= max_low_pfn) continue; + if (start < reserved_end) + start = reserved_end; + if (end > max_low_pfn) + end = max_low_pfn; /* - * ... finally, did all the rounding and playing - * around just make the area go away? + * ... finally, is the area going away? */ - if (last_pfn <= curr_pfn) + if (end <= start) continue; + size = end - start; /* Register lowmem ranges */ - free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); - memory_present(0, curr_pfn, curr_pfn + size - 1); + free_bootmem(PFN_PHYS(start), size << PAGE_SHIFT); + memory_present(0, start, end); } - /* Reserve the bootmap memory. */ - reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size); -#endif /* CONFIG_SGI_IP27 */ - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - if (initrd_start) { - unsigned long initrd_size = ((unsigned char *)initrd_end) - - ((unsigned char *)initrd_start); - const int width = sizeof(long) * 2; - - printk("Initial ramdisk at: 0x%p (%lu bytes)\n", - (void *)initrd_start, initrd_size); - - if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) { - printk("initrd extends beyond end of memory " - "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n", - width, - (unsigned long long) CPHYSADDR(initrd_end), - width, - (unsigned long long) PFN_PHYS(max_low_pfn)); - initrd_start = initrd_end = 0; - initrd_reserve_bootmem = 0; - } + /* + * Reserve the bootmap memory. + */ + reserve_bootmem(PFN_PHYS(mapstart), bootmap_size); - if (initrd_reserve_bootmem) - reserve_bootmem(CPHYSADDR(initrd_start), initrd_size); - } -#endif /* CONFIG_BLK_DEV_INITRD */ + /* + * Reserve initrd memory if needed. + */ + finalize_initrd(); } +#endif /* CONFIG_SGI_IP27 */ + /* * arch_mem_init - initialize memory managment subsystem * * o plat_mem_setup() detects the memory configuration and will record detected * memory areas using add_memory_region. - * o parse_cmdline_early() parses the command line for mem= options which, - * iff detected, will override the results of the automatic detection. * * At this stage the memory configuration of the system is known to the * kernel but generic memory managment system is still entirely uninitialized. @@ -465,25 +369,59 @@ static inline void bootmem_init(void) * initialization hook for anything else was introduced. */ -extern void plat_mem_setup(void); +static int usermem __initdata = 0; + +static int __init early_parse_mem(char *p) +{ + unsigned long start, size; + + /* + * If a user specifies memory size, we + * blow away any automatically generated + * size. + */ + if (usermem == 0) { + boot_mem_map.nr_map = 0; + usermem = 1; + } + start = 0; + size = memparse(p, &p); + if (*p == '@') + start = memparse(p + 1, &p); + + add_memory_region(start, size, BOOT_MEM_RAM); + return 0; +} +early_param("mem", early_parse_mem); static void __init arch_mem_init(char **cmdline_p) { + extern void plat_mem_setup(void); + /* call board setup routine */ plat_mem_setup(); + printk("Determined physical RAM map:\n"); + print_memory_map(); + strlcpy(command_line, arcs_cmdline, sizeof(command_line)); strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; - parse_cmdline_early(); + parse_early_param(); + + if (usermem) { + printk("User-defined physical RAM map:\n"); + print_memory_map(); + } + bootmem_init(); sparse_init(); paging_init(); } -static inline void resource_init(void) +static void __init resource_init(void) { int i; @@ -504,10 +442,10 @@ static inline void resource_init(void) start = boot_mem_map.map[i].addr; end = boot_mem_map.map[i].addr + boot_mem_map.map[i].size - 1; - if (start >= MAXMEM) + if (start >= HIGHMEM_START) continue; - if (end >= MAXMEM) - end = MAXMEM - 1; + if (end >= HIGHMEM_START) + end = HIGHMEM_START - 1; res = alloc_bootmem(sizeof(struct resource)); switch (boot_mem_map.map[i].type) { @@ -536,9 +474,6 @@ static inline void resource_init(void) } } -#undef MAXMEM -#undef MAXMEM_PFN - void __init setup_arch(char **cmdline_p) { cpu_probe(); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 6b4d9be3161..b9d358e0521 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -424,15 +424,11 @@ void do_signal(struct pt_regs *regs) if (!user_mode(regs)) return; - if (try_to_freeze()) - goto no_signal; - if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else oldset = ¤t->blocked; - signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { /* Whee! Actually deliver the signal. */ @@ -446,9 +442,10 @@ void do_signal(struct pt_regs *regs) if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); } + + return; } -no_signal: /* * Who's code doesn't conform to the restartable syscall convention * dies here!!! The li instruction, a single machine instruction, @@ -466,6 +463,7 @@ no_signal: regs->regs[7] = regs->regs[26]; regs->cp0_epc -= 4; } + regs->regs[0] = 0; /* Don't deal with this again. */ } /* diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index f32a22997c3..c86a5ddff05 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -815,9 +815,6 @@ void do_signal32(struct pt_regs *regs) if (!user_mode(regs)) return; - if (try_to_freeze()) - goto no_signal; - if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else @@ -836,9 +833,10 @@ void do_signal32(struct pt_regs *regs) if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); } + + return; } -no_signal: /* * Who's code doesn't conform to the restartable syscall convention * dies here!!! The li instruction, a single machine instruction, @@ -856,6 +854,7 @@ no_signal: regs->regs[7] = regs->regs[26]; regs->cp0_epc -= 4; } + regs->regs[0] = 0; /* Don't deal with this again. */ } /* diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 93429a4d301..766253c44f3 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -203,7 +203,7 @@ void plat_smp_setup(void) write_vpe_c0_config( read_c0_config()); /* make sure there are no software interrupts pending */ - write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0)); + write_vpe_c0_cause(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S index 4cc3dea3661..76cb31d5748 100644 --- a/arch/mips/kernel/smtc-asm.S +++ b/arch/mips/kernel/smtc-asm.S @@ -8,7 +8,7 @@ #include <asm/regdef.h> #include <asm/asmmacro.h> #include <asm/stackframe.h> -#include <asm/stackframe.h> +#include <asm/irqflags.h> /* * "Software Interrupt" linkage. diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 0721314db65..9951240cc3f 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -263,7 +263,7 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) return error; } -void sys_set_thread_area(unsigned long addr) +asmlinkage int sys_set_thread_area(unsigned long addr) { struct thread_info *ti = task_thread_info(current); @@ -271,6 +271,8 @@ void sys_set_thread_area(unsigned long addr) /* If some future MIPS implementation has this register in hardware, * we will need to update it here (and in context switches). */ + + return 0; } asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 954a198494e..e51d8fd9a15 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -20,6 +20,7 @@ #include <linux/spinlock.h> #include <linux/kallsyms.h> #include <linux/bootmem.h> +#include <linux/interrupt.h> #include <asm/bootinfo.h> #include <asm/branch.h> @@ -72,28 +73,68 @@ void (*board_nmi_handler_setup)(void); void (*board_ejtag_handler_setup)(void); void (*board_bind_eic_interrupt)(int irq, int regset); -/* - * These constant is for searching for possible module text segments. - * MODULE_RANGE is a guess of how much space is likely to be vmalloced. - */ -#define MODULE_RANGE (8*1024*1024) + +static void show_raw_backtrace(unsigned long reg29) +{ + unsigned long *sp = (unsigned long *)reg29; + unsigned long addr; + + printk("Call Trace:"); +#ifdef CONFIG_KALLSYMS + printk("\n"); +#endif + while (!kstack_end(sp)) { + addr = *sp++; + if (__kernel_text_address(addr)) + print_ip_sym(addr); + } + printk("\n"); +} + +#ifdef CONFIG_KALLSYMS +static int raw_show_trace; +static int __init set_raw_show_trace(char *str) +{ + raw_show_trace = 1; + return 1; +} +__setup("raw_show_trace", set_raw_show_trace); + +extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, + unsigned long pc, unsigned long ra); + +static void show_backtrace(struct task_struct *task, struct pt_regs *regs) +{ + unsigned long sp = regs->regs[29]; + unsigned long ra = regs->regs[31]; + unsigned long pc = regs->cp0_epc; + + if (raw_show_trace || !__kernel_text_address(pc)) { + show_raw_backtrace(sp); + return; + } + printk("Call Trace:\n"); + do { + print_ip_sym(pc); + pc = unwind_stack(task, &sp, pc, ra); + ra = 0; + } while (pc); + printk("\n"); +} +#else +#define show_backtrace(task, r) show_raw_backtrace((r)->regs[29]); +#endif /* * This routine abuses get_user()/put_user() to reference pointers * with at least a bit of error checking ... */ -void show_stack(struct task_struct *task, unsigned long *sp) +static void show_stacktrace(struct task_struct *task, struct pt_regs *regs) { const int field = 2 * sizeof(unsigned long); long stackdata; int i; - - if (!sp) { - if (task && task != current) - sp = (unsigned long *) task->thread.reg29; - else - sp = (unsigned long *) &sp; - } + unsigned long *sp = (unsigned long *)regs->regs[29]; printk("Stack :"); i = 0; @@ -114,32 +155,48 @@ void show_stack(struct task_struct *task, unsigned long *sp) i++; } printk("\n"); + show_backtrace(task, regs); } -void show_trace(struct task_struct *task, unsigned long *stack) +static __always_inline void prepare_frametrace(struct pt_regs *regs) { - const int field = 2 * sizeof(unsigned long); - unsigned long addr; - - if (!stack) { - if (task && task != current) - stack = (unsigned long *) task->thread.reg29; - else - stack = (unsigned long *) &stack; - } - - printk("Call Trace:"); -#ifdef CONFIG_KALLSYMS - printk("\n"); + __asm__ __volatile__( + ".set push\n\t" + ".set noat\n\t" +#ifdef CONFIG_64BIT + "1: dla $1, 1b\n\t" + "sd $1, %0\n\t" + "sd $29, %1\n\t" + "sd $31, %2\n\t" +#else + "1: la $1, 1b\n\t" + "sw $1, %0\n\t" + "sw $29, %1\n\t" + "sw $31, %2\n\t" #endif - while (!kstack_end(stack)) { - addr = *stack++; - if (__kernel_text_address(addr)) { - printk(" [<%0*lx>] ", field, addr); - print_symbol("%s\n", addr); + ".set pop\n\t" + : "=m" (regs->cp0_epc), + "=m" (regs->regs[29]), "=m" (regs->regs[31]) + : : "memory"); +} + +void show_stack(struct task_struct *task, unsigned long *sp) +{ + struct pt_regs regs; + if (sp) { + regs.regs[29] = (unsigned long)sp; + regs.regs[31] = 0; + regs.cp0_epc = 0; + } else { + if (task && task != current) { + regs.regs[29] = task->thread.reg29; + regs.regs[31] = 0; + regs.cp0_epc = task->thread.reg31; + } else { + prepare_frametrace(®s); } } - printk("\n"); + show_stacktrace(task, ®s); } /* @@ -147,9 +204,15 @@ void show_trace(struct task_struct *task, unsigned long *stack) */ void dump_stack(void) { - unsigned long stack; + struct pt_regs regs; - show_trace(current, &stack); + /* + * Remove any garbage that may be in regs (specially func + * addresses) to avoid show_raw_backtrace() to report them + */ + memset(®s, 0, sizeof(regs)); + prepare_frametrace(®s); + show_backtrace(current, ®s); } EXPORT_SYMBOL(dump_stack); @@ -268,8 +331,7 @@ void show_registers(struct pt_regs *regs) print_modules(); printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n", current->comm, current->pid, current_thread_info(), current); - show_stack(current, (long *) regs->regs[29]); - show_trace(current, (long *) regs->regs[29]); + show_stacktrace(current, regs); show_code((unsigned int *) regs->cp0_epc); printk("\n"); } @@ -292,6 +354,16 @@ NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs) printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); spin_unlock_irq(&die_lock); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) { + printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + ssleep(5); + panic("Fatal exception"); + } + do_exit(SIGSEGV); } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 9ee0ec2cd06..51ddd216689 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -768,10 +768,16 @@ int vpe_run(struct vpe * v) */ write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA)); + + back_to_back_c0_hazard(); + /* Set up the XTC bit in vpeconf0 to point at our tc */ write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) | (t->index << VPECONF0_XTC_SHIFT)); + back_to_back_c0_hazard(); + /* enable this VPE */ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index fb25e0377f1..a020a3cb4f4 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2006 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> * * ######################################################################## * @@ -25,17 +27,20 @@ */ #include <linux/compiler.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/kernel_stat.h> -#include <asm/irq.h> +#include <asm/gdb-stub.h> #include <asm/io.h> +#include <asm/irq_cpu.h> +#include <asm/msc01_ic.h> + #include <asm/mips-boards/atlas.h> #include <asm/mips-boards/atlasint.h> -#include <asm/gdb-stub.h> - +#include <asm/mips-boards/generic.h> static struct atlas_ictrl_regs *atlas_hw0_icregs; @@ -47,13 +52,13 @@ static struct atlas_ictrl_regs *atlas_hw0_icregs; void disable_atlas_irq(unsigned int irq_nr) { - atlas_hw0_icregs->intrsten = (1 << (irq_nr-ATLASINT_BASE)); + atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE); iob(); } void enable_atlas_irq(unsigned int irq_nr) { - atlas_hw0_icregs->intseten = (1 << (irq_nr-ATLASINT_BASE)); + atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE); iob(); } @@ -107,7 +112,7 @@ static inline void atlas_hw0_irqdispatch(struct pt_regs *regs) if (unlikely(int_status == 0)) return; - irq = ATLASINT_BASE + ls1bit32(int_status); + irq = ATLAS_INT_BASE + ls1bit32(int_status); DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq); @@ -161,15 +166,14 @@ static inline unsigned int irq_ffs(unsigned int pending) } /* - * IRQs on the Atlas board look basically (barring software IRQs which we - * don't use at all and all external interrupt sources are combined together - * on hardware interrupt 0 (MIPS IRQ 2)) like: + * IRQs on the Atlas board look basically like (all external interrupt + * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)): * - * MIPS IRQ Source + * MIPS IRQ Source * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) + * 0 Software 0 (reschedule IPI on MT) + * 1 Software 1 (remote call IPI on MT) + * 2 Combined Atlas hardware interrupt (hw0) * 3 Hardware (ignored) * 4 Hardware (ignored) * 5 Hardware (ignored) @@ -179,7 +183,7 @@ static inline unsigned int irq_ffs(unsigned int pending) * We handle the IRQ according to _our_ priority which is: * * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt + * Lowest ---- Software 0 * * then we just return, if multiple IRQs are pending then we will just take * another exception, big deal. @@ -193,17 +197,19 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) if (irq == MIPSCPU_INT_ATLAS) atlas_hw0_irqdispatch(regs); - else if (irq > 0) + else if (irq >= 0) do_IRQ(MIPSCPU_INT_BASE + irq, regs); else spurious_interrupt(regs); } -void __init arch_init_irq(void) +static inline void init_atlas_irqs (int base) { int i; - atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *)); + atlas_hw0_icregs = (struct atlas_ictrl_regs *) + ioremap(ATLAS_ICTRL_REGS_BASE, + sizeof(struct atlas_ictrl_regs *)); /* * Mask out all interrupt by writing "1" to all bit position in @@ -211,7 +217,7 @@ void __init arch_init_irq(void) */ atlas_hw0_icregs->intrsten = 0xffffffff; - for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) { + for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = 0; irq_desc[i].depth = 1; @@ -219,3 +225,62 @@ void __init arch_init_irq(void) spin_lock_init(&irq_desc[i].lock); } } + +static struct irqaction atlasirq = { + .handler = no_action, + .name = "Atlas cascade" +}; + +msc_irqmap_t __initdata msc_irqmap[] = { + {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, +}; +int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap); + +msc_irqmap_t __initdata msc_eicirqmap[] = { + {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_ATLAS, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} +}; +int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap); + +void __init arch_init_irq(void) +{ + init_atlas_irqs(ATLAS_INT_BASE); + + if (!cpu_has_veic) + mips_cpu_irq_init(MIPSCPU_INT_BASE); + + switch(mips_revision_corid) { + case MIPS_REVISION_CORID_CORE_MSC: + case MIPS_REVISION_CORID_CORE_FPGA2: + case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: + case MIPS_REVISION_CORID_CORE_EMUL_MSC: + if (cpu_has_veic) + init_msc_irqs (MSC01E_INT_BASE, + msc_eicirqmap, msc_nr_eicirqs); + else + init_msc_irqs (MSC01C_INT_BASE, + msc_irqmap, msc_nr_irqs); + } + + + if (cpu_has_veic) { + set_vi_handler (MSC01E_INT_ATLAS, atlas_hw0_irqdispatch); + setup_irq (MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq); + } else if (cpu_has_vint) { + set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch); +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, + &atlasirq, (0x100 << MIPSCPU_INT_ATLAS)); +#else /* Not SMTC */ + setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq); +#endif /* CONFIG_MIPS_MT_SMTC */ + } else + setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq); +} diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 9871a91fdb0..0c6b0ce1502 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -77,7 +77,7 @@ static void __init serial_init(void) #else s.iobase = ATLAS_UART_REGS_BASE+3; #endif - s.irq = ATLASINT_UART; + s.irq = ATLAS_INT_UART; s.uartclk = ATLAS_BASE_BAUD * 16; s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; s.iotype = UPIO_PORT; diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 557bf961f36..8d15861fce6 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -41,8 +41,13 @@ #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> + +#ifdef CONFIG_MIPS_ATLAS +#include <asm/mips-boards/atlasint.h> +#endif +#ifdef CONFIG_MIPS_MALTA #include <asm/mips-boards/maltaint.h> -#include <asm/mc146818-time.h> +#endif unsigned long cpu_khz; @@ -92,10 +97,9 @@ extern int (*perf_irq)(struct pt_regs *regs); irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int cpu = smp_processor_id(); - int r2 = cpu_has_mips_r2; #ifdef CONFIG_MIPS_MT_SMTC - /* + /* * In an SMTC system, one Count/Compare set exists per VPE. * Which TC within a VPE gets the interrupt is essentially * random - we only know that it shouldn't be one with @@ -108,29 +112,46 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * the general MIPS timer_interrupt routine. */ + int vpflags; + /* - * DVPE is necessary so long as cross-VPE interrupts - * are done via read-modify-write of Cause register. + * We could be here due to timer interrupt, + * perf counter overflow, or both. */ - int vpflags = dvpe(); - write_c0_compare (read_c0_count() - 1); - clear_c0_cause(CPUCTR_IMASKBIT); - evpe(vpflags); + if (read_c0_cause() & (1 << 26)) + perf_irq(regs); - if (cpu_data[cpu].vpe_id == 0) { - timer_interrupt(irq, dev_id, regs); - scroll_display_message(); - } else - write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); - smtc_timer_broadcast(cpu_data[cpu].vpe_id); - - if (cpu != 0) + if (read_c0_cause() & (1 << 30)) { + /* If timer interrupt, make it de-assert */ + write_c0_compare (read_c0_count() - 1); /* - * Other CPUs should do profiling and process accounting + * DVPE is necessary so long as cross-VPE interrupts + * are done via read-modify-write of Cause register. */ - local_timer_interrupt(irq, dev_id, regs); - + vpflags = dvpe(); + clear_c0_cause(CPUCTR_IMASKBIT); + evpe(vpflags); + /* + * There are things we only want to do once per tick + * in an "MP" system. One TC of each VPE will take + * the actual timer interrupt. The others will get + * timer broadcast IPIs. We use whoever it is that takes + * the tick on VPE 0 to run the full timer_interrupt(). + */ + if (cpu_data[cpu].vpe_id == 0) { + timer_interrupt(irq, NULL, regs); + smtc_timer_broadcast(cpu_data[cpu].vpe_id); + scroll_display_message(); + } else { + write_c0_compare(read_c0_count() + + (mips_hpt_frequency/HZ)); + local_timer_interrupt(irq, dev_id, regs); + smtc_timer_broadcast(cpu_data[cpu].vpe_id); + } + } #else /* CONFIG_MIPS_MT_SMTC */ + int r2 = cpu_has_mips_r2; + if (cpu == 0) { /* * CPU 0 handles the global timer interrupt job and process @@ -161,9 +182,8 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ local_timer_interrupt(irq, dev_id, regs); } -#endif /* CONFIG_MIPS_MT_SMTC */ - out: +#endif /* CONFIG_MIPS_MT_SMTC */ return IRQ_HANDLED; } diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index bb041a22f20..e1f35ef8114 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -335,7 +335,7 @@ void __init r3k_cache_init(void) flush_cache_mm = r3k_flush_cache_mm; flush_cache_range = r3k_flush_cache_range; flush_cache_page = r3k_flush_cache_page; - flush_icache_page = r3k_flush_icache_page; + __flush_icache_page = r3k_flush_icache_page; flush_icache_range = r3k_flush_icache_range; flush_cache_sigtramp = r3k_flush_cache_sigtramp; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 069803f58f3..0b2da53750b 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -89,7 +89,7 @@ static inline void r4k_blast_dcache_page_dc32(unsigned long addr) blast_dcache32_page(addr); } -static inline void r4k_blast_dcache_page_setup(void) +static void __init r4k_blast_dcache_page_setup(void) { unsigned long dc_lsize = cpu_dcache_line_size(); @@ -103,7 +103,7 @@ static inline void r4k_blast_dcache_page_setup(void) static void (* r4k_blast_dcache_page_indexed)(unsigned long addr); -static inline void r4k_blast_dcache_page_indexed_setup(void) +static void __init r4k_blast_dcache_page_indexed_setup(void) { unsigned long dc_lsize = cpu_dcache_line_size(); @@ -117,7 +117,7 @@ static inline void r4k_blast_dcache_page_indexed_setup(void) static void (* r4k_blast_dcache)(void); -static inline void r4k_blast_dcache_setup(void) +static void __init r4k_blast_dcache_setup(void) { unsigned long dc_lsize = cpu_dcache_line_size(); @@ -202,7 +202,7 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page) static void (* r4k_blast_icache_page)(unsigned long addr); -static inline void r4k_blast_icache_page_setup(void) +static void __init r4k_blast_icache_page_setup(void) { unsigned long ic_lsize = cpu_icache_line_size(); @@ -219,7 +219,7 @@ static inline void r4k_blast_icache_page_setup(void) static void (* r4k_blast_icache_page_indexed)(unsigned long addr); -static inline void r4k_blast_icache_page_indexed_setup(void) +static void __init r4k_blast_icache_page_indexed_setup(void) { unsigned long ic_lsize = cpu_icache_line_size(); @@ -243,7 +243,7 @@ static inline void r4k_blast_icache_page_indexed_setup(void) static void (* r4k_blast_icache)(void); -static inline void r4k_blast_icache_setup(void) +static void __init r4k_blast_icache_setup(void) { unsigned long ic_lsize = cpu_icache_line_size(); @@ -264,7 +264,7 @@ static inline void r4k_blast_icache_setup(void) static void (* r4k_blast_scache_page)(unsigned long addr); -static inline void r4k_blast_scache_page_setup(void) +static void __init r4k_blast_scache_page_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); @@ -282,7 +282,7 @@ static inline void r4k_blast_scache_page_setup(void) static void (* r4k_blast_scache_page_indexed)(unsigned long addr); -static inline void r4k_blast_scache_page_indexed_setup(void) +static void __init r4k_blast_scache_page_indexed_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); @@ -300,7 +300,7 @@ static inline void r4k_blast_scache_page_indexed_setup(void) static void (* r4k_blast_scache)(void); -static inline void r4k_blast_scache_setup(void) +static void __init r4k_blast_scache_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); @@ -475,7 +475,7 @@ static inline void local_r4k_flush_cache_page(void *args) } } if (exec) { - if (cpu_has_vtag_icache) { + if (cpu_has_vtag_icache && mm == current->active_mm) { int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) @@ -599,7 +599,7 @@ static inline void local_r4k_flush_icache_page(void *args) * We're not sure of the virtual address(es) involved here, so * we have to flush the entire I-cache. */ - if (cpu_has_vtag_icache) { + if (cpu_has_vtag_icache && vma->vm_mm == current->active_mm) { int cpu = smp_processor_id(); if (cpu_context(cpu, vma->vm_mm) != 0) @@ -1221,7 +1221,7 @@ void au1x00_fixup_config_od(void) } } -static inline void coherency_setup(void) +static void __init coherency_setup(void) { change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT); @@ -1242,7 +1242,7 @@ static inline void coherency_setup(void) clear_c0_config(CONF_CU); break; /* - * We need to catch the ealry Alchemy SOCs with + * We need to catch the early Alchemy SOCs with * the write-only co_config.od bit and set it back to one... */ case CPU_AU1000: /* rev. DA, HA, HB */ @@ -1291,7 +1291,7 @@ void __init r4k_cache_init(void) __flush_cache_all = r4k___flush_cache_all; flush_cache_mm = r4k_flush_cache_mm; flush_cache_page = r4k_flush_cache_page; - flush_icache_page = r4k_flush_icache_page; + __flush_icache_page = r4k_flush_icache_page; flush_cache_range = r4k_flush_cache_range; flush_cache_sigtramp = r4k_flush_cache_sigtramp; diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 2d71efb82ac..16bad7c0a63 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -155,6 +155,26 @@ static inline void __sb1_flush_icache_all(void) } /* + * Invalidate a range of the icache. The addresses are virtual, and + * the cache is virtually indexed and tagged. However, we don't + * necessarily have the right ASID context, so use index ops instead + * of hit ops. + */ +static inline void __sb1_flush_icache_range(unsigned long start, + unsigned long end) +{ + start &= ~(icache_line_size - 1); + end = (end + icache_line_size - 1) & ~(icache_line_size - 1); + + while (start != end) { + cache_set_op(Index_Invalidate_I, start & icache_index_mask); + start += icache_line_size; + } + mispredict(); + sync(); +} + +/* * Flush the icache for a given physical page. Need to writeback the * dcache first, then invalidate the icache. If the page isn't * executable, nothing is required. @@ -173,8 +193,11 @@ static void local_sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long /* * Bumping the ASID is probably cheaper than the flush ... */ - if (cpu_context(cpu, vma->vm_mm) != 0) - drop_mmu_context(vma->vm_mm, cpu); + if (vma->vm_mm == current->active_mm) { + if (cpu_context(cpu, vma->vm_mm) != 0) + drop_mmu_context(vma->vm_mm, cpu); + } else + __sb1_flush_icache_range(addr, addr + PAGE_SIZE); } #ifdef CONFIG_SMP @@ -210,26 +233,6 @@ void sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsign __attribute__((alias("local_sb1_flush_cache_page"))); #endif -/* - * Invalidate a range of the icache. The addresses are virtual, and - * the cache is virtually indexed and tagged. However, we don't - * necessarily have the right ASID context, so use index ops instead - * of hit ops. - */ -static inline void __sb1_flush_icache_range(unsigned long start, - unsigned long end) -{ - start &= ~(icache_line_size - 1); - end = (end + icache_line_size - 1) & ~(icache_line_size - 1); - - while (start != end) { - cache_set_op(Index_Invalidate_I, start & icache_index_mask); - start += icache_line_size; - } - mispredict(); - sync(); -} - /* * Invalidate all caches on this CPU @@ -326,9 +329,12 @@ static void local_sb1_flush_icache_page(struct vm_area_struct *vma, * If there's a context, bump the ASID (cheaper than a flush, * since we don't know VAs!) */ - if (cpu_context(cpu, vma->vm_mm) != 0) { - drop_mmu_context(vma->vm_mm, cpu); - } + if (vma->vm_mm == current->active_mm) { + if (cpu_context(cpu, vma->vm_mm) != 0) + drop_mmu_context(vma->vm_mm, cpu); + } else + __sb1_flush_icache_range(start, start + PAGE_SIZE); + } #ifdef CONFIG_SMP @@ -520,7 +526,7 @@ void sb1_cache_init(void) /* These routines are for Icache coherence with the Dcache */ flush_icache_range = sb1_flush_icache_range; - flush_icache_page = sb1_flush_icache_page; + __flush_icache_page = sb1_flush_icache_page; flush_icache_all = __sb1_flush_icache_all; /* local only */ /* This implies an Icache flush too, so can't be nop'ed */ diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 5dfc9b1901f..932a09d7ef8 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -382,7 +382,7 @@ void __init tx39_cache_init(void) flush_cache_mm = (void *) tx39h_flush_icache_all; flush_cache_range = (void *) tx39h_flush_icache_all; flush_cache_page = (void *) tx39h_flush_icache_all; - flush_icache_page = (void *) tx39h_flush_icache_all; + __flush_icache_page = (void *) tx39h_flush_icache_all; flush_icache_range = (void *) tx39h_flush_icache_all; flush_cache_sigtramp = (void *) tx39h_flush_icache_all; @@ -408,7 +408,7 @@ void __init tx39_cache_init(void) flush_cache_mm = tx39_flush_cache_mm; flush_cache_range = tx39_flush_cache_range; flush_cache_page = tx39_flush_cache_page; - flush_icache_page = tx39_flush_icache_page; + __flush_icache_page = tx39_flush_icache_page; flush_icache_range = tx39_flush_icache_range; flush_cache_sigtramp = tx39_flush_cache_sigtramp; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index ddd3a2de1d7..40c8b023518 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -25,7 +25,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); void (*flush_icache_range)(unsigned long start, unsigned long end); -void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page); +void (*__flush_icache_page)(struct vm_area_struct *vma, struct page *page); /* MIPS specific cache operations */ void (*flush_cache_sigtramp)(unsigned long addr); @@ -70,6 +70,8 @@ void __flush_dcache_page(struct page *page) struct address_space *mapping = page_mapping(page); unsigned long addr; + if (PageHighMem(page)) + return; if (mapping && !mapping_mapped(mapping)) { SetPageDcacheDirty(page); return; @@ -91,16 +93,16 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, { struct page *page; unsigned long pfn, addr; + int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc; pfn = pte_pfn(pte); - if (pfn_valid(pfn) && (page = pfn_to_page(pfn), page_mapping(page)) && - Page_dcache_dirty(page)) { - if (pages_do_alias((unsigned long)page_address(page), - address & PAGE_MASK)) { - addr = (unsigned long) page_address(page); + if (unlikely(!pfn_valid(pfn))) + return; + page = pfn_to_page(pfn); + if (page_mapping(page) && Page_dcache_dirty(page)) { + addr = (unsigned long) page_address(page); + if (exec || pages_do_alias(addr, address & PAGE_MASK)) flush_data_cache_page(addr); - } - ClearPageDcacheDirty(page); } } diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index e3a61722486..a4f8c45c4e8 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -89,7 +89,7 @@ good_area: if (!(vma->vm_flags & VM_WRITE)) goto bad_area; } else { - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) goto bad_area; } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index c52497bb102..5b06349af2d 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -163,10 +163,10 @@ static int __init page_is_ram(unsigned long pagenr) void __init paging_init(void) { - unsigned long zones_size[] = { [0 ... MAX_NR_ZONES - 1] = 0 }; + unsigned long zones_size[] = { 0, }; unsigned long max_dma, high, low; #ifndef CONFIG_FLATMEM - unsigned long zholes_size[] = { [0 ... MAX_NR_ZONES - 1] = 0 }; + unsigned long zholes_size[] = { 0, }; unsigned long i, j, pfn; #endif diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 2cde1b77244..2e0e21ef433 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -26,11 +26,6 @@ extern void build_tlb_refill_handler(void); */ #define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) -/* CP0 hazard avoidance. */ -#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t") - /* Atomicity and interruptability */ #ifdef CONFIG_MIPS_MT_SMTC @@ -126,7 +121,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, start += (PAGE_SIZE << 1); mtc0_tlbw_hazard(); tlb_probe(); - BARRIER; + tlb_probe_hazard(); idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); @@ -168,7 +163,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) start += (PAGE_SIZE << 1); mtc0_tlbw_hazard(); tlb_probe(); - BARRIER; + tlb_probe_hazard(); idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); @@ -202,7 +197,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) write_c0_entryhi(page | newpid); mtc0_tlbw_hazard(); tlb_probe(); - BARRIER; + tlb_probe_hazard(); idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); @@ -235,7 +230,7 @@ void local_flush_tlb_one(unsigned long page) write_c0_entryhi(page); mtc0_tlbw_hazard(); tlb_probe(); - BARRIER; + tlb_probe_hazard(); idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); @@ -279,7 +274,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) pgdp = pgd_offset(vma->vm_mm, address); mtc0_tlbw_hazard(); tlb_probe(); - BARRIER; + tlb_probe_hazard(); pudp = pud_offset(pgdp, address); pmdp = pmd_offset(pudp, address); idx = read_c0_index(); @@ -320,7 +315,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma, pgdp = pgd_offset(vma->vm_mm, address); mtc0_tlbw_hazard(); tlb_probe(); - BARRIER; + tlb_probe_hazard(); pmdp = pmd_offset(pgdp, address); idx = read_c0_index(); ptep = pte_offset_map(pmdp, address); @@ -351,7 +346,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, wired = read_c0_wired(); write_c0_wired(wired + 1); write_c0_index(wired); - BARRIER; + tlbw_use_hazard(); /* What is the hazard here? */ write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); write_c0_entrylo0(entrylo0); @@ -361,7 +356,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, tlbw_use_hazard(); write_c0_entryhi(old_ctx); - BARRIER; + tlbw_use_hazard(); /* What is the hazard here? */ write_c0_pagemask(old_pagemask); local_flush_tlb_all(); EXIT_CRITICAL(flags); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 35d5927706e..edefa97b233 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_ITE_BOARD_GEN) += ops-it8172.o obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o -obj-$(CONFIG_MIPS_GT96100) += ops-gt96100.o obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o @@ -28,8 +27,7 @@ obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_MIPS_EV96100) += fixup-ev64120.o -obj-$(CONFIG_MIPS_EV96100) += fixup-ev96100.o pci-ev96100.o +obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c index 439510af303..c6cd6e9cdfb 100644 --- a/arch/mips/pci/fixup-atlas.c +++ b/arch/mips/pci/fixup-atlas.c @@ -21,16 +21,16 @@ #include <asm/mips-boards/atlasint.h> -#define PCIA ATLASINT_PCIA -#define PCIB ATLASINT_PCIB -#define PCIC ATLASINT_PCIC -#define PCID ATLASINT_PCID -#define INTA ATLASINT_INTA -#define INTB ATLASINT_INTB -#define ETH ATLASINT_ETH -#define INTC ATLASINT_INTC -#define SCSI ATLASINT_SCSI -#define INTD ATLASINT_INTD +#define PCIA ATLAS_INT_PCIA +#define PCIB ATLAS_INT_PCIB +#define PCIC ATLAS_INT_PCIC +#define PCID ATLAS_INT_PCID +#define INTA ATLAS_INT_INTA +#define INTB ATLAS_INT_INTB +#define ETH ATLAS_INT_ETH +#define INTC ATLAS_INT_INTC +#define SCSI ATLAS_INT_SCSI +#define INTD ATLAS_INT_INTD static char irq_tab[][5] __initdata = { /* INTA INTB INTC INTD */ diff --git a/arch/mips/pci/fixup-ev96100.c b/arch/mips/pci/fixup-ev96100.c deleted file mode 100644 index e2bc977b6d5..00000000000 --- a/arch/mips/pci/fixup-ev96100.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * EV96100 Board specific pci fixups. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> - -static char irq_tab_ev96100[][5] __initdata = { - [8] = { 0, 5, 5, 5, 5 }, - [9] = { 0, 2, 2, 2, 2 } -}; - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_tab_ev96100[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c index 0c0c1e6519f..8ae46481fcb 100644 --- a/arch/mips/pci/ops-au1000.c +++ b/arch/mips/pci/ops-au1000.c @@ -110,7 +110,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, if (first_cfg) { /* reserve a wired entry for pci config accesses */ first_cfg = 0; - pci_cfg_vm = get_vm_area(0x2000, 0); + pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); if (!pci_cfg_vm) panic (KERN_ERR "PCI unable to get vm area\n"); pci_cfg_wired_entry = read_c0_wired(); diff --git a/arch/mips/pci/ops-gt96100.c b/arch/mips/pci/ops-gt96100.c deleted file mode 100644 index 9e4ea6627e2..00000000000 --- a/arch/mips/pci/ops-gt96100.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Galileo EV96100 board specific pci support. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/generic/pci.c - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/delay.h> -#include <asm/gt64120.h> -#include <asm/galileo-boards/ev96100.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -static int static gt96100_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, int where, u32 * data) -{ - unsigned char bus = bus->number; - u32 intr; - - /* - * Because of a bug in the galileo (for slot 31). - */ - if (bus == 0 && devfn >= PCI_DEVFN(31, 0)) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* Clear cause register bits */ - GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | - GT_INTRCAUSE_TARABORT0_BIT)); - - /* Setup address */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (bus << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (devfn << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - udelay(2); - - - if (access_type == PCI_ACCESS_WRITE) { - if (devfn != 0) - *data = le32_to_cpu(*data); - GT_WRITE(GT_PCI0_CFGDATA_OFS, *data); - } else { - *data = GT_READ(GT_PCI0_CFGDATA_OFS); - if (devfn != 0) - *data = le32_to_cpu(*data); - } - - udelay(2); - - /* Check for master or target abort */ - intr = GT_READ(GT_INTRCAUSE_OFS); - - if (intr & (GT_INTRCAUSE_MASABORT0_BIT | GT_INTRCAUSE_TARABORT0_BIT)) { - /* Error occured */ - - /* Clear bits */ - GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | - GT_INTRCAUSE_TARABORT0_BIT)); - return -1; - } - return 0; -} - -/* - * We can't address 8 and 16 bit words directly. Instead we have to - * read/write a 32bit word and mask/modify the data we actually want. - */ -static int gt96100_pcibios_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - u32 data = 0; - - if (gt96100_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xff; - break; - - case 2: - *val = (data >> ((where & 3) << 3)) & 0xffff; - break; - - case 4: - *val = data; - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int gt96100_pcibios_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - u32 data = 0; - - switch (size) { - case 1: - if (gt96100_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (gt96100_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; - - case 2: - if (gt96100_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (gt96100_config_access(PCI_ACCESS_WRITE, dev, where, &data)) - return -1; - - - return PCIBIOS_SUCCESSFUL; - - case 4: - if (gt96100_config_access(PCI_ACCESS_WRITE, dev, where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; - } -} - -struct pci_ops gt96100_pci_ops = { - .read = gt96100_pcibios_read, - .write = gt96100_pcibios_write -}; diff --git a/arch/mips/pci/pci-ev96100.c b/arch/mips/pci/pci-ev96100.c deleted file mode 100644 index f9457ea00de..00000000000 --- a/arch/mips/pci/pci-ev96100.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -static struct resource pci_io_resource = { - .name = "io pci IO space", - .start = 0x10000000, - .end = 0x11ffffff, - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .name = "ext pci memory space", - .start = 0x12000000, - .end = 0x13ffffff, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops gt96100_pci_ops; - -struct pci_controller ev96100_controller = { - .pci_ops = >96100_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -static void ev96100_pci_init(void) -{ - register_pci_controller(&ev96100_controller); -} - -arch_initcall(ev96100_pci_init); diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 80eb9af9ecd..405ce015273 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -16,8 +16,6 @@ #include <asm/sn/intr.h> #include <asm/sn/sn0/hub.h> -extern unsigned int allocate_irqno(void); - /* * Max #PCI busses we can handle; ie, max #PCI bridges. */ diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index efe6971fc80..16e5682b01f 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -19,6 +19,7 @@ #include <linux/swap.h> #include <linux/bootmem.h> #include <linux/pfn.h> +#include <linux/highmem.h> #include <asm/page.h> #include <asm/sections.h> @@ -508,7 +509,7 @@ extern unsigned long setup_zero_pages(void); void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; unsigned node; pagetable_init(); diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index ed325f0ab28..a0222fa4416 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -469,21 +469,6 @@ void bcm1480_kgdb_interrupt(struct pt_regs *regs) #endif /* CONFIG_KGDB */ -static inline int dclz(unsigned long long x) -{ - int lz; - - __asm__ ( - " .set push \n" - " .set mips64 \n" - " dclz %0, %1 \n" - " .set pop \n" - : "=r" (lz) - : "r" (x)); - - return lz; -} - extern void bcm1480_timer_interrupt(struct pt_regs *regs); extern void bcm1480_mailbox_interrupt(struct pt_regs *regs); extern void bcm1480_kgdb_interrupt(struct pt_regs *regs); @@ -536,9 +521,9 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) if (mask_h) { if (mask_h ^ 1) - do_IRQ(63 - dclz(mask_h), regs); + do_IRQ(fls64(mask_h) - 1, regs); else - do_IRQ(127 - dclz(mask_l), regs); + do_IRQ(63 + fls64(mask_l), regs); } } } diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 1de71adec6c..a451b4c7732 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -419,21 +419,6 @@ static void sb1250_kgdb_interrupt(struct pt_regs *regs) #endif /* CONFIG_KGDB */ -static inline int dclz(unsigned long long x) -{ - int lz; - - __asm__ ( - " .set push \n" - " .set mips64 \n" - " dclz %0, %1 \n" - " .set pop \n" - : "=r" (lz) - : "r" (x)); - - return lz; -} - extern void sb1250_timer_interrupt(struct pt_regs *regs); extern void sb1250_mailbox_interrupt(struct pt_regs *regs); extern void sb1250_kgdb_interrupt(struct pt_regs *regs); @@ -490,6 +475,6 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(), R_IMR_INTERRUPT_STATUS_BASE))); if (mask) - do_IRQ(63 - dclz(mask), regs); + do_IRQ(fls64(mask) - 1, regs); } } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index f2b96f1e0da..25ad28d63e8 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -551,7 +551,7 @@ void show_mem(void) printk("Zone list for zone %d on node %d: ", j, i); for (k = 0; zl->zones[k] != NULL; k++) - printk("[%d/%s] ", zl->zones[k]->zone_pgdat->node_id, zl->zones[k]->name); + printk("[%d/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name); printk("\n"); } } @@ -809,7 +809,7 @@ void __init paging_init(void) flush_tlb_all_local(NULL); for (i = 0; i < npmem_ranges; i++) { - unsigned long zones_size[MAX_NR_ZONES] = { 0, 0, 0 }; + unsigned long zones_size[MAX_NR_ZONES] = { 0, }; /* We have an IOMMU, so all memory can go into a single ZONE_DMA zone. */ diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index de1ef2fa1a2..a0dd1b0ee48 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -731,11 +731,10 @@ config ARCH_SPARSEMEM_DEFAULT def_bool y depends on SMP && PPC_PSERIES -source "mm/Kconfig" - -config HAVE_ARCH_EARLY_PFN_TO_NID +config ARCH_POPULATES_NODE_MAP def_bool y - depends on NEED_MULTIPLE_NODES + +source "mm/Kconfig" config ARCH_MEMORY_PROBE def_bool y diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S index 7369f9a6ad2..69e8f86aa4f 100644 --- a/arch/powerpc/kernel/swsusp_32.S +++ b/arch/powerpc/kernel/swsusp_32.S @@ -159,8 +159,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) isync /* Load ptr the list of pages to copy in r3 */ - lis r11,(pagedir_nosave - KERNELBASE)@h - ori r11,r11,pagedir_nosave@l + lis r11,(restore_pblist - KERNELBASE)@h + ori r11,r11,restore_pblist@l lwz r10,0(r11) /* Copy the pages. This is a very basic implementation, to diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 2e292863e98..5e391fc2534 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -740,7 +740,7 @@ asmlinkage long compat_sys_umask(u32 mask) return sys_umask((int)mask); } -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SYSCTL_SYSCALL struct __sysctl_args32 { u32 name; int nlen; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index eebd8b83a6b..16fe027bbc1 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -256,20 +256,22 @@ void __init do_init_bootmem(void) boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages); + /* Add active regions with valid PFNs */ + for (i = 0; i < lmb.memory.cnt; i++) { + unsigned long start_pfn, end_pfn; + start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT; + end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i); + add_active_range(0, start_pfn, end_pfn); + } + /* Add all physical memory to the bootmem map, mark each area * present. */ - for (i = 0; i < lmb.memory.cnt; i++) { - unsigned long base = lmb.memory.region[i].base; - unsigned long size = lmb_size_bytes(&lmb.memory, i); #ifdef CONFIG_HIGHMEM - if (base >= total_lowmem) - continue; - if (base + size > total_lowmem) - size = total_lowmem - base; + free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT); +#else + free_bootmem_with_active_regions(0, max_pfn); #endif - free_bootmem(base, size); - } /* reserve the sections we're already using */ for (i = 0; i < lmb.reserved.cnt; i++) @@ -277,9 +279,8 @@ void __init do_init_bootmem(void) lmb_size_bytes(&lmb.reserved, i)); /* XXX need to clip this if using highmem? */ - for (i = 0; i < lmb.memory.cnt; i++) - memory_present(0, lmb_start_pfn(&lmb.memory, i), - lmb_end_pfn(&lmb.memory, i)); + sparse_memory_present_with_active_regions(0); + init_bootmem_done = 1; } @@ -288,10 +289,9 @@ void __init do_init_bootmem(void) */ void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES]; - unsigned long zholes_size[MAX_NR_ZONES]; unsigned long total_ram = lmb_phys_mem_size(); unsigned long top_of_ram = lmb_end_of_DRAM(); + unsigned long max_zone_pfns[MAX_NR_ZONES]; #ifdef CONFIG_HIGHMEM map_page(PKMAP_BASE, 0, 0); /* XXX gross */ @@ -307,26 +307,13 @@ void __init paging_init(void) top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - /* - * All pages are DMA-able so we put them all in the DMA zone. - */ - memset(zones_size, 0, sizeof(zones_size)); - memset(zholes_size, 0, sizeof(zholes_size)); - - zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; - zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; - #ifdef CONFIG_HIGHMEM - zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; - zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT; - zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT; + max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT; + max_zone_pfns[1] = top_of_ram >> PAGE_SHIFT; #else - zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; - zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; -#endif /* CONFIG_HIGHMEM */ - - free_area_init_node(0, NODE_DATA(0), zones_size, - __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); + max_zone_pfns[0] = top_of_ram >> PAGE_SHIFT; +#endif + free_area_init_nodes(max_zone_pfns); } #endif /* ! CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 6c0f1c7d83e..43c272075e1 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -39,96 +39,6 @@ static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; static int min_common_depth; static int n_mem_addr_cells, n_mem_size_cells; -/* - * We need somewhere to store start/end/node for each region until we have - * allocated the real node_data structures. - */ -#define MAX_REGIONS (MAX_LMB_REGIONS*2) -static struct { - unsigned long start_pfn; - unsigned long end_pfn; - int nid; -} init_node_data[MAX_REGIONS] __initdata; - -int __init early_pfn_to_nid(unsigned long pfn) -{ - unsigned int i; - - for (i = 0; init_node_data[i].end_pfn; i++) { - unsigned long start_pfn = init_node_data[i].start_pfn; - unsigned long end_pfn = init_node_data[i].end_pfn; - - if ((start_pfn <= pfn) && (pfn < end_pfn)) - return init_node_data[i].nid; - } - - return -1; -} - -void __init add_region(unsigned int nid, unsigned long start_pfn, - unsigned long pages) -{ - unsigned int i; - - dbg("add_region nid %d start_pfn 0x%lx pages 0x%lx\n", - nid, start_pfn, pages); - - for (i = 0; init_node_data[i].end_pfn; i++) { - if (init_node_data[i].nid != nid) - continue; - if (init_node_data[i].end_pfn == start_pfn) { - init_node_data[i].end_pfn += pages; - return; - } - if (init_node_data[i].start_pfn == (start_pfn + pages)) { - init_node_data[i].start_pfn -= pages; - return; - } - } - - /* - * Leave last entry NULL so we dont iterate off the end (we use - * entry.end_pfn to terminate the walk). - */ - if (i >= (MAX_REGIONS - 1)) { - printk(KERN_ERR "WARNING: too many memory regions in " - "numa code, truncating\n"); - return; - } - - init_node_data[i].start_pfn = start_pfn; - init_node_data[i].end_pfn = start_pfn + pages; - init_node_data[i].nid = nid; -} - -/* We assume init_node_data has no overlapping regions */ -void __init get_region(unsigned int nid, unsigned long *start_pfn, - unsigned long *end_pfn, unsigned long *pages_present) -{ - unsigned int i; - - *start_pfn = -1UL; - *end_pfn = *pages_present = 0; - - for (i = 0; init_node_data[i].end_pfn; i++) { - if (init_node_data[i].nid != nid) - continue; - - *pages_present += init_node_data[i].end_pfn - - init_node_data[i].start_pfn; - - if (init_node_data[i].start_pfn < *start_pfn) - *start_pfn = init_node_data[i].start_pfn; - - if (init_node_data[i].end_pfn > *end_pfn) - *end_pfn = init_node_data[i].end_pfn; - } - - /* We didnt find a matching region, return start/end as 0 */ - if (*start_pfn == -1UL) - *start_pfn = 0; -} - static void __cpuinit map_cpu_to_node(int cpu, int node) { numa_cpu_lookup_table[cpu] = node; @@ -468,8 +378,8 @@ new_range: continue; } - add_region(nid, start >> PAGE_SHIFT, - size >> PAGE_SHIFT); + add_active_range(nid, start >> PAGE_SHIFT, + (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT)); if (--ranges) goto new_range; @@ -482,6 +392,7 @@ static void __init setup_nonnuma(void) { unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long total_ram = lmb_phys_mem_size(); + unsigned long start_pfn, end_pfn; unsigned int i; printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", @@ -489,9 +400,11 @@ static void __init setup_nonnuma(void) printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - for (i = 0; i < lmb.memory.cnt; ++i) - add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT, - lmb_size_pages(&lmb.memory, i)); + for (i = 0; i < lmb.memory.cnt; ++i) { + start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT; + end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i); + add_active_range(0, start_pfn, end_pfn); + } node_set_online(0); } @@ -630,11 +543,11 @@ void __init do_init_bootmem(void) (void *)(unsigned long)boot_cpuid); for_each_online_node(nid) { - unsigned long start_pfn, end_pfn, pages_present; + unsigned long start_pfn, end_pfn; unsigned long bootmem_paddr; unsigned long bootmap_pages; - get_region(nid, &start_pfn, &end_pfn, &pages_present); + get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); /* Allocate the node structure node local if possible */ NODE_DATA(nid) = careful_allocation(nid, @@ -667,19 +580,7 @@ void __init do_init_bootmem(void) init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT, start_pfn, end_pfn); - /* Add free regions on this node */ - for (i = 0; init_node_data[i].end_pfn; i++) { - unsigned long start, end; - - if (init_node_data[i].nid != nid) - continue; - - start = init_node_data[i].start_pfn << PAGE_SHIFT; - end = init_node_data[i].end_pfn << PAGE_SHIFT; - - dbg("free_bootmem %lx %lx\n", start, end - start); - free_bootmem_node(NODE_DATA(nid), start, end - start); - } + free_bootmem_with_active_regions(nid, end_pfn); /* Mark reserved regions on this node */ for (i = 0; i < lmb.reserved.cnt; i++) { @@ -710,44 +611,16 @@ void __init do_init_bootmem(void) } } - /* Add regions into sparsemem */ - for (i = 0; init_node_data[i].end_pfn; i++) { - unsigned long start, end; - - if (init_node_data[i].nid != nid) - continue; - - start = init_node_data[i].start_pfn; - end = init_node_data[i].end_pfn; - - memory_present(nid, start, end); - } + sparse_memory_present_with_active_regions(nid); } } void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES]; - unsigned long zholes_size[MAX_NR_ZONES]; - int nid; - - memset(zones_size, 0, sizeof(zones_size)); - memset(zholes_size, 0, sizeof(zholes_size)); - - for_each_online_node(nid) { - unsigned long start_pfn, end_pfn, pages_present; - - get_region(nid, &start_pfn, &end_pfn, &pages_present); - - zones_size[ZONE_DMA] = end_pfn - start_pfn; - zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - pages_present; - - dbg("free_area_init node %d %lx %lx (hole: %lx)\n", nid, - zones_size[ZONE_DMA], start_pfn, zholes_size[ZONE_DMA]); - - free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, - zholes_size); - } + unsigned long max_zone_pfns[MAX_NR_ZONES] = { + lmb_end_of_DRAM() >> PAGE_SHIFT + }; + free_area_init_nodes(max_zone_pfns); } static int __init early_numa(char *p) diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 7b4572805db..3950ddccb2c 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -82,7 +82,6 @@ spufs_new_inode(struct super_block *sb, int mode) inode->i_mode = mode; inode->i_uid = current->fsuid; inode->i_gid = current->fsgid; - inode->i_blksize = PAGE_CACHE_SIZE; inode->i_blocks = 0; inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; out: @@ -120,7 +119,7 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry, ret = 0; inode->i_op = &spufs_file_iops; inode->i_fop = fops; - inode->u.generic_ip = SPUFS_I(inode)->i_ctx = get_spu_context(ctx); + inode->i_private = SPUFS_I(inode)->i_ctx = get_spu_context(ctx); d_add(dentry, inode); out: return ret; diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index 641e6511cf0..446e17d162a 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -85,7 +85,7 @@ static int hcall_inst_seq_open(struct inode *inode, struct file *file) rc = seq_open(file, &hcall_inst_seq_ops); seq = file->private_data; - seq->private = file->f_dentry->d_inode->u.generic_ip; + seq->private = file->f_dentry->d_inode->i_private; return rc; } diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index b604926401f..723972bb5bd 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -339,7 +339,7 @@ static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0; pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) { u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); - if (id == PCI_CAP_ID_HT_IRQCONF) { + if (id == PCI_CAP_ID_HT) { id = readb(devbase + pos + 3); if (id == 0x80) break; diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 8fa10cf661a..fdd9e7b6624 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -953,6 +953,9 @@ config NR_CPUS config HIGHMEM bool "High memory support" +config ARCH_POPULATES_NODE_MAP + def_bool y + source kernel/Kconfig.hz source kernel/Kconfig.preempt source "mm/Kconfig" diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 523392d460f..410200046af 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -358,8 +358,8 @@ void __init do_init_bootmem(void) */ void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES], i; - + unsigned long start_pfn, end_pfn; + unsigned long max_zone_pfns[MAX_NR_ZONES]; #ifdef CONFIG_HIGHMEM map_page(PKMAP_BASE, 0, 0); /* XXX gross */ pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k @@ -369,19 +369,18 @@ void __init paging_init(void) (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN); kmap_prot = PAGE_KERNEL; #endif /* CONFIG_HIGHMEM */ - - /* - * All pages are DMA-able so we put them all in the DMA zone. - */ - zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; - for (i = 1; i < MAX_NR_ZONES; i++) - zones_size[i] = 0; + /* All pages are DMA-able so we put them all in the DMA zone. */ + start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT; + end_pfn = start_pfn + (total_memory >> PAGE_SHIFT); + add_active_range(0, start_pfn, end_pfn); #ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT; + max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT; + max_zone_pfns[1] = total_memory >> PAGE_SHIFT; +#else + max_zone_pfns[0] = total_memory >> PAGE_SHIFT; #endif /* CONFIG_HIGHMEM */ - - free_area_init(zones_size); + free_area_init_nodes(max_zone_pfns); } void __init mem_init(void) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index b216ca659cd..f900a516f09 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -51,6 +51,10 @@ config 64BIT Select this option if you have a 64 bit IBM zSeries machine and want to use the 64 bit addressing mode. +config 32BIT + bool + default y if !64BIT + config SMP bool "Symmetric multi-processing support" ---help--- @@ -149,6 +153,14 @@ config MARCH_Z990 This will be slightly faster but does not work on older machines such as the z900. +config MARCH_Z9_109 + bool "IBM System z9" + help + Select this to enable optimizations for IBM System z9-109, IBM + System z9 Enterprise Class (z9 EC), and IBM System z9 Business + Class (z9 BC). The kernel will be slightly faster but will not + work on older machines such as the z990, z890, z900, and z800. + endchoice config PACK_STACK diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 74ef57dcfa6..5deb9f7544a 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -33,6 +33,7 @@ endif cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5) cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900) cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990) +cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109) # # Prevent tail-call optimizations, to get clearer backtraces: diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index b69ed742f98..9a8f6ff2165 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -157,12 +157,12 @@ int appldata_diag(char record_nr, u16 function, unsigned long buffer, .prod_nr = {0xD3, 0xC9, 0xD5, 0xE4, 0xE7, 0xD2, 0xD9}, /* "LINUXKR" */ .prod_fn = 0xD5D3, /* "NL" */ - .record_nr = record_nr, .version_nr = 0xF2F6, /* "26" */ .release_nr = 0xF0F1, /* "01" */ - .mod_lvl = (mod_lvl[0]) << 8 | mod_lvl[1], }; + id.record_nr = record_nr; + id.mod_lvl = (mod_lvl[0]) << 8 | mod_lvl[1]; return appldata_asm(&id, function, (void *) buffer, length); } /************************ timer, work, DIAG <END> ****************************/ diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index ab3b0765a64..8aea3698a77 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -117,8 +117,7 @@ static void appldata_get_mem_data(void *data) mem_data->pgpgout = ev[PGPGOUT] >> 1; mem_data->pswpin = ev[PSWPIN]; mem_data->pswpout = ev[PSWPOUT]; - mem_data->pgalloc = ev[PGALLOC_HIGH] + ev[PGALLOC_NORMAL] + - ev[PGALLOC_DMA]; + mem_data->pgalloc = ev[PGALLOC_NORMAL] + ev[PGALLOC_DMA]; mem_data->pgfault = ev[PGFAULT]; mem_data->pgmajfault = ev[PGMAJFAULT]; diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h index efd836c2e4a..2b137089f62 100644 --- a/arch/s390/crypto/crypt_s390.h +++ b/arch/s390/crypto/crypt_s390.h @@ -105,63 +105,6 @@ struct crypt_s390_query_status { }; /* - * Standard fixup and ex_table sections for crypt_s390 inline functions. - * label 0: the s390 crypto operation - * label 1: just after 1 to catch illegal operation exception - * (unsupported model) - * label 6: the return point after fixup - * label 7: set error value if exception _in_ crypto operation - * label 8: set error value if illegal operation exception - * [ret] is the variable to receive the error code - * [ERR] is the error code value - */ -#ifndef CONFIG_64BIT -#define __crypt_s390_fixup \ - ".section .fixup,\"ax\" \n" \ - "7: lhi %0,%h[e1] \n" \ - " bras 1,9f \n" \ - " .long 6b \n" \ - "8: lhi %0,%h[e2] \n" \ - " bras 1,9f \n" \ - " .long 6b \n" \ - "9: l 1,0(1) \n" \ - " br 1 \n" \ - ".previous \n" \ - ".section __ex_table,\"a\" \n" \ - " .align 4 \n" \ - " .long 0b,7b \n" \ - " .long 1b,8b \n" \ - ".previous" -#else /* CONFIG_64BIT */ -#define __crypt_s390_fixup \ - ".section .fixup,\"ax\" \n" \ - "7: lhi %0,%h[e1] \n" \ - " jg 6b \n" \ - "8: lhi %0,%h[e2] \n" \ - " jg 6b \n" \ - ".previous\n" \ - ".section __ex_table,\"a\" \n" \ - " .align 8 \n" \ - " .quad 0b,7b \n" \ - " .quad 1b,8b \n" \ - ".previous" -#endif /* CONFIG_64BIT */ - -/* - * Standard code for setting the result of s390 crypto instructions. - * %0: the register which will receive the result - * [result]: the register containing the result (e.g. second operand length - * to compute number of processed bytes]. - */ -#ifndef CONFIG_64BIT -#define __crypt_s390_set_result \ - " lr %0,%[result] \n" -#else /* CONFIG_64BIT */ -#define __crypt_s390_set_result \ - " lgr %0,%[result] \n" -#endif - -/* * Executes the KM (CIPHER MESSAGE) operation of the CPU. * @param func: the function code passed to KM; see crypt_s390_km_func * @param param: address of parameter block; see POP for details on each func @@ -176,28 +119,24 @@ crypt_s390_km(long func, void* param, u8* dest, const u8* src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; register void* __param asm("1") = param; - register u8* __dest asm("4") = dest; register const u8* __src asm("2") = src; register long __src_len asm("3") = src_len; + register u8* __dest asm("4") = dest; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB92E0000,%1,%2 \n" /* KM opcode */ + asm volatile( + "0: .insn rre,0xb92e0000,%3,%1 \n" /* KM opcode */ "1: brc 1,0b \n" /* handle partial completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__dest), "+a" (__src), - [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + " ahi %0,%h7\n" + "2: ahi %0,%h8\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -215,28 +154,24 @@ crypt_s390_kmc(long func, void* param, u8* dest, const u8* src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; register void* __param asm("1") = param; - register u8* __dest asm("4") = dest; register const u8* __src asm("2") = src; register long __src_len asm("3") = src_len; + register u8* __dest asm("4") = dest; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB92F0000,%1,%2 \n" /* KMC opcode */ + asm volatile( + "0: .insn rre,0xb92f0000,%3,%1 \n" /* KMC opcode */ "1: brc 1,0b \n" /* handle partial completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__dest), "+a" (__src), - [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + " ahi %0,%h7\n" + "2: ahi %0,%h8\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -258,22 +193,19 @@ crypt_s390_kimd(long func, void* param, const u8* src, long src_len) register long __src_len asm("3") = src_len; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB93E0000,%1,%1 \n" /* KIMD opcode */ - "1: brc 1,0b \n" /* handle partical completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__src), [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && (func & CRYPT_S390_FUNC_MASK)){ - ret = src_len - ret; - } - return ret; + asm volatile( + "0: .insn rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */ + "1: brc 1,0b \n" /* handle partial completion */ + " ahi %0,%h6\n" + "2: ahi %0,%h7\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -294,22 +226,19 @@ crypt_s390_klmd(long func, void* param, const u8* src, long src_len) register long __src_len asm("3") = src_len; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB93F0000,%1,%1 \n" /* KLMD opcode */ - "1: brc 1,0b \n" /* handle partical completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__src), [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + asm volatile( + "0: .insn rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */ + "1: brc 1,0b \n" /* handle partial completion */ + " ahi %0,%h6\n" + "2: ahi %0,%h7\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -331,22 +260,19 @@ crypt_s390_kmac(long func, void* param, const u8* src, long src_len) register long __src_len asm("3") = src_len; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB91E0000,%5,%5 \n" /* KMAC opcode */ - "1: brc 1,0b \n" /* handle partical completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__src), [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + asm volatile( + "0: .insn rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */ + "1: brc 1,0b \n" /* handle partial completion */ + " ahi %0,%h6\n" + "2: ahi %0,%h7\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /** diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 75144efbb92..443fa377d9f 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -333,22 +333,14 @@ static int diag204(unsigned long subcode, unsigned long size, void *addr) register unsigned long _subcode asm("0") = subcode; register unsigned long _size asm("1") = size; - asm volatile (" diag %2,%0,0x204\n" - "0: \n" ".section __ex_table,\"a\"\n" -#ifndef __s390x__ - " .align 4\n" - " .long 0b,0b\n" -#else - " .align 8\n" - " .quad 0b,0b\n" -#endif - ".previous":"+d" (_subcode), "+d"(_size) - :"d"(addr) - :"memory"); + asm volatile( + " diag %2,%0,0x204\n" + "0:\n" + EX_TABLE(0b,0b) + : "+d" (_subcode), "+d" (_size) : "d" (addr) : "memory"); if (_subcode) return -1; - else - return _size; + return _size; } /* @@ -403,7 +395,8 @@ static void *diag204_get_buffer(enum diag204_format fmt, int *pages) *pages = 1; return diag204_alloc_rbuf(); } else {/* INFO_EXT */ - *pages = diag204(SUBC_RSI | INFO_EXT, 0, NULL); + *pages = diag204((unsigned long)SUBC_RSI | + (unsigned long)INFO_EXT, 0, NULL); if (*pages <= 0) return ERR_PTR(-ENOSYS); else @@ -490,8 +483,7 @@ out: static void diag224(void *ptr) { - asm volatile(" diag %0,%1,0x224\n" - : :"d" (0), "d"(ptr) : "memory"); + asm volatile("diag %0,%1,0x224" : :"d" (0), "d"(ptr) : "memory"); } static int diag224_get_name_table(void) diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index bdade5f2e32..813fc21358f 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -91,7 +91,6 @@ static struct inode *hypfs_make_inode(struct super_block *sb, int mode) ret->i_mode = mode; ret->i_uid = hypfs_info->uid; ret->i_gid = hypfs_info->gid; - ret->i_blksize = PAGE_CACHE_SIZE; ret->i_blocks = 0; ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME; if (mode & S_IFDIR) @@ -104,13 +103,13 @@ static struct inode *hypfs_make_inode(struct super_block *sb, int mode) static void hypfs_drop_inode(struct inode *inode) { - kfree(inode->u.generic_ip); + kfree(inode->i_private); generic_delete_inode(inode); } static int hypfs_open(struct inode *inode, struct file *filp) { - char *data = filp->f_dentry->d_inode->u.generic_ip; + char *data = filp->f_dentry->d_inode->i_private; struct hypfs_sb_info *fs_info; if (filp->f_mode & FMODE_WRITE) { @@ -352,7 +351,7 @@ static struct dentry *hypfs_create_file(struct super_block *sb, parent->d_inode->i_nlink++; } else BUG(); - inode->u.generic_ip = data; + inode->i_private = data; d_instantiate(dentry, inode); dget(dentry); return dentry; diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 785c9f70ac9..c46e3d48e41 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -544,10 +544,7 @@ sys32_execve(struct pt_regs regs) current->ptrace &= ~PT_DTRACE; task_unlock(current); current->thread.fp_regs.fpc=0; - __asm__ __volatile__ - ("sr 0,0\n\t" - "sfpc 0,0\n\t" - : : :"0"); + asm volatile("sfpc %0,0" : : "d" (0)); } putname(filename); out: @@ -708,7 +705,7 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd, return ret; } -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SYSCTL_SYSCALL struct __sysctl_args32 { u32 name; int nlen; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 4d53b273935..4aabeeaa7cf 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -4,97 +4,97 @@ * * Copyright (C) IBM Corp. 2000,2006 * Author(s): Gerhard Tonn (ton@de.ibm.com), -* Thomas Spatzier (tspat@de.ibm.com) -*/ +* Thomas Spatzier (tspat@de.ibm.com) +*/ - .globl sys32_exit_wrapper + .globl sys32_exit_wrapper sys32_exit_wrapper: lgfr %r2,%r2 # int jg sys_exit # branch to sys_exit - - .globl sys32_read_wrapper + + .globl sys32_read_wrapper sys32_read_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # char * llgfr %r4,%r4 # size_t jg sys32_read # branch to sys_read - .globl sys32_write_wrapper + .globl sys32_write_wrapper sys32_write_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # const char * llgfr %r4,%r4 # size_t jg sys32_write # branch to system call - .globl sys32_open_wrapper + .globl sys32_open_wrapper sys32_open_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int lgfr %r4,%r4 # int jg sys_open # branch to system call - .globl sys32_close_wrapper + .globl sys32_close_wrapper sys32_close_wrapper: llgfr %r2,%r2 # unsigned int jg sys_close # branch to system call - .globl sys32_creat_wrapper + .globl sys32_creat_wrapper sys32_creat_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_creat # branch to system call - .globl sys32_link_wrapper + .globl sys32_link_wrapper sys32_link_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_link # branch to system call - .globl sys32_unlink_wrapper + .globl sys32_unlink_wrapper sys32_unlink_wrapper: llgtr %r2,%r2 # const char * jg sys_unlink # branch to system call - .globl sys32_chdir_wrapper + .globl sys32_chdir_wrapper sys32_chdir_wrapper: llgtr %r2,%r2 # const char * jg sys_chdir # branch to system call - .globl sys32_time_wrapper + .globl sys32_time_wrapper sys32_time_wrapper: llgtr %r2,%r2 # int * jg compat_sys_time # branch to system call - .globl sys32_mknod_wrapper + .globl sys32_mknod_wrapper sys32_mknod_wrapper: llgtr %r2,%r2 # const char * - lgfr %r3,%r3 # int + lgfr %r3,%r3 # int llgfr %r4,%r4 # dev jg sys_mknod # branch to system call - .globl sys32_chmod_wrapper + .globl sys32_chmod_wrapper sys32_chmod_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # mode_t jg sys_chmod # branch to system call - .globl sys32_lchown16_wrapper + .globl sys32_lchown16_wrapper sys32_lchown16_wrapper: llgtr %r2,%r2 # const char * - llgfr %r3,%r3 # __kernel_old_uid_emu31_t - llgfr %r4,%r4 # __kernel_old_uid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r4,%r4 # __kernel_old_uid_emu31_t jg sys32_lchown16 # branch to system call - .globl sys32_lseek_wrapper + .globl sys32_lseek_wrapper sys32_lseek_wrapper: llgfr %r2,%r2 # unsigned int lgfr %r3,%r3 # off_t llgfr %r4,%r4 # unsigned int jg sys_lseek # branch to system call -#sys32_getpid_wrapper # void +#sys32_getpid_wrapper # void - .globl sys32_mount_wrapper + .globl sys32_mount_wrapper sys32_mount_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # char * @@ -103,19 +103,19 @@ sys32_mount_wrapper: llgtr %r6,%r6 # void * jg compat_sys_mount # branch to system call - .globl sys32_oldumount_wrapper + .globl sys32_oldumount_wrapper sys32_oldumount_wrapper: llgtr %r2,%r2 # char * jg sys_oldumount # branch to system call - .globl sys32_setuid16_wrapper + .globl sys32_setuid16_wrapper sys32_setuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t jg sys32_setuid16 # branch to system call -#sys32_getuid16_wrapper # void +#sys32_getuid16_wrapper # void - .globl sys32_ptrace_wrapper + .globl sys32_ptrace_wrapper sys32_ptrace_wrapper: lgfr %r2,%r2 # long lgfr %r3,%r3 # long @@ -123,168 +123,168 @@ sys32_ptrace_wrapper: llgfr %r5,%r5 # long jg sys_ptrace # branch to system call - .globl sys32_alarm_wrapper + .globl sys32_alarm_wrapper sys32_alarm_wrapper: llgfr %r2,%r2 # unsigned int jg sys_alarm # branch to system call -#sys32_pause_wrapper # void +#sys32_pause_wrapper # void - .globl compat_sys_utime_wrapper + .globl compat_sys_utime_wrapper compat_sys_utime_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct compat_utimbuf * jg compat_sys_utime # branch to system call - .globl sys32_access_wrapper + .globl sys32_access_wrapper sys32_access_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_access # branch to system call - .globl sys32_nice_wrapper + .globl sys32_nice_wrapper sys32_nice_wrapper: lgfr %r2,%r2 # int jg sys_nice # branch to system call -#sys32_sync_wrapper # void +#sys32_sync_wrapper # void - .globl sys32_kill_wrapper + .globl sys32_kill_wrapper sys32_kill_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int jg sys_kill # branch to system call - .globl sys32_rename_wrapper + .globl sys32_rename_wrapper sys32_rename_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_rename # branch to system call - .globl sys32_mkdir_wrapper + .globl sys32_mkdir_wrapper sys32_mkdir_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_mkdir # branch to system call - .globl sys32_rmdir_wrapper + .globl sys32_rmdir_wrapper sys32_rmdir_wrapper: llgtr %r2,%r2 # const char * jg sys_rmdir # branch to system call - .globl sys32_dup_wrapper + .globl sys32_dup_wrapper sys32_dup_wrapper: llgfr %r2,%r2 # unsigned int jg sys_dup # branch to system call - .globl sys32_pipe_wrapper + .globl sys32_pipe_wrapper sys32_pipe_wrapper: llgtr %r2,%r2 # u32 * jg sys_pipe # branch to system call - .globl compat_sys_times_wrapper + .globl compat_sys_times_wrapper compat_sys_times_wrapper: llgtr %r2,%r2 # struct compat_tms * jg compat_sys_times # branch to system call - .globl sys32_brk_wrapper + .globl sys32_brk_wrapper sys32_brk_wrapper: llgtr %r2,%r2 # unsigned long jg sys_brk # branch to system call - .globl sys32_setgid16_wrapper + .globl sys32_setgid16_wrapper sys32_setgid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t jg sys32_setgid16 # branch to system call -#sys32_getgid16_wrapper # void +#sys32_getgid16_wrapper # void .globl sys32_signal_wrapper sys32_signal_wrapper: - lgfr %r2,%r2 # int + lgfr %r2,%r2 # int llgtr %r3,%r3 # __sighandler_t jg sys_signal -#sys32_geteuid16_wrapper # void +#sys32_geteuid16_wrapper # void -#sys32_getegid16_wrapper # void +#sys32_getegid16_wrapper # void - .globl sys32_acct_wrapper + .globl sys32_acct_wrapper sys32_acct_wrapper: llgtr %r2,%r2 # char * jg sys_acct # branch to system call - .globl sys32_umount_wrapper + .globl sys32_umount_wrapper sys32_umount_wrapper: llgtr %r2,%r2 # char * lgfr %r3,%r3 # int jg sys_umount # branch to system call - .globl compat_sys_ioctl_wrapper + .globl compat_sys_ioctl_wrapper compat_sys_ioctl_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned int llgfr %r4,%r4 # unsigned int jg compat_sys_ioctl # branch to system call - .globl compat_sys_fcntl_wrapper + .globl compat_sys_fcntl_wrapper compat_sys_fcntl_wrapper: llgfr %r2,%r2 # unsigned int - llgfr %r3,%r3 # unsigned int + llgfr %r3,%r3 # unsigned int llgfr %r4,%r4 # unsigned long jg compat_sys_fcntl # branch to system call - .globl sys32_setpgid_wrapper + .globl sys32_setpgid_wrapper sys32_setpgid_wrapper: lgfr %r2,%r2 # pid_t lgfr %r3,%r3 # pid_t jg sys_setpgid # branch to system call - .globl sys32_umask_wrapper + .globl sys32_umask_wrapper sys32_umask_wrapper: lgfr %r2,%r2 # int jg sys_umask # branch to system call - .globl sys32_chroot_wrapper + .globl sys32_chroot_wrapper sys32_chroot_wrapper: llgtr %r2,%r2 # char * jg sys_chroot # branch to system call .globl sys32_ustat_wrapper sys32_ustat_wrapper: - llgfr %r2,%r2 # dev_t + llgfr %r2,%r2 # dev_t llgtr %r3,%r3 # struct ustat * jg sys_ustat - .globl sys32_dup2_wrapper + .globl sys32_dup2_wrapper sys32_dup2_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned int jg sys_dup2 # branch to system call -#sys32_getppid_wrapper # void +#sys32_getppid_wrapper # void -#sys32_getpgrp_wrapper # void +#sys32_getpgrp_wrapper # void -#sys32_setsid_wrapper # void +#sys32_setsid_wrapper # void - .globl sys32_sigaction_wrapper + .globl sys32_sigaction_wrapper sys32_sigaction_wrapper: - lgfr %r2,%r2 # int + lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct old_sigaction * llgtr %r4,%r4 # struct old_sigaction32 * jg sys32_sigaction # branch to system call - .globl sys32_setreuid16_wrapper + .globl sys32_setreuid16_wrapper sys32_setreuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t - llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t jg sys32_setreuid16 # branch to system call - .globl sys32_setregid16_wrapper + .globl sys32_setregid16_wrapper sys32_setregid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t - llgfr %r3,%r3 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r3,%r3 # __kernel_old_gid_emu31_t jg sys32_setregid16 # branch to system call .globl sys_sigsuspend_wrapper @@ -294,95 +294,95 @@ sys_sigsuspend_wrapper: llgfr %r4,%r4 # old_sigset_t jg sys_sigsuspend - .globl compat_sys_sigpending_wrapper + .globl compat_sys_sigpending_wrapper compat_sys_sigpending_wrapper: llgtr %r2,%r2 # compat_old_sigset_t * jg compat_sys_sigpending # branch to system call - .globl sys32_sethostname_wrapper + .globl sys32_sethostname_wrapper sys32_sethostname_wrapper: llgtr %r2,%r2 # char * lgfr %r3,%r3 # int jg sys_sethostname # branch to system call - .globl compat_sys_setrlimit_wrapper + .globl compat_sys_setrlimit_wrapper compat_sys_setrlimit_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct rlimit_emu31 * jg compat_sys_setrlimit # branch to system call - .globl compat_sys_old_getrlimit_wrapper + .globl compat_sys_old_getrlimit_wrapper compat_sys_old_getrlimit_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct rlimit_emu31 * jg compat_sys_old_getrlimit # branch to system call - .globl compat_sys_getrlimit_wrapper + .globl compat_sys_getrlimit_wrapper compat_sys_getrlimit_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct rlimit_emu31 * jg compat_sys_getrlimit # branch to system call - .globl sys32_mmap2_wrapper + .globl sys32_mmap2_wrapper sys32_mmap2_wrapper: llgtr %r2,%r2 # struct mmap_arg_struct_emu31 * jg sys32_mmap2 # branch to system call - .globl compat_sys_getrusage_wrapper + .globl compat_sys_getrusage_wrapper compat_sys_getrusage_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct rusage_emu31 * jg compat_sys_getrusage # branch to system call - .globl sys32_gettimeofday_wrapper + .globl sys32_gettimeofday_wrapper sys32_gettimeofday_wrapper: llgtr %r2,%r2 # struct timeval_emu31 * llgtr %r3,%r3 # struct timezone * jg sys32_gettimeofday # branch to system call - .globl sys32_settimeofday_wrapper + .globl sys32_settimeofday_wrapper sys32_settimeofday_wrapper: llgtr %r2,%r2 # struct timeval_emu31 * llgtr %r3,%r3 # struct timezone * jg sys32_settimeofday # branch to system call - .globl sys32_getgroups16_wrapper + .globl sys32_getgroups16_wrapper sys32_getgroups16_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # __kernel_old_gid_emu31_t * jg sys32_getgroups16 # branch to system call - .globl sys32_setgroups16_wrapper + .globl sys32_setgroups16_wrapper sys32_setgroups16_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # __kernel_old_gid_emu31_t * jg sys32_setgroups16 # branch to system call - .globl sys32_symlink_wrapper + .globl sys32_symlink_wrapper sys32_symlink_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_symlink # branch to system call - .globl sys32_readlink_wrapper + .globl sys32_readlink_wrapper sys32_readlink_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # char * lgfr %r4,%r4 # int jg sys_readlink # branch to system call - .globl sys32_uselib_wrapper + .globl sys32_uselib_wrapper sys32_uselib_wrapper: llgtr %r2,%r2 # const char * jg sys_uselib # branch to system call - .globl sys32_swapon_wrapper + .globl sys32_swapon_wrapper sys32_swapon_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_swapon # branch to system call - .globl sys32_reboot_wrapper + .globl sys32_reboot_wrapper sys32_reboot_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -390,121 +390,121 @@ sys32_reboot_wrapper: llgtr %r5,%r5 # void * jg sys_reboot # branch to system call - .globl old32_readdir_wrapper + .globl old32_readdir_wrapper old32_readdir_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # void * llgfr %r4,%r4 # unsigned int jg compat_sys_old_readdir # branch to system call - .globl old32_mmap_wrapper + .globl old32_mmap_wrapper old32_mmap_wrapper: llgtr %r2,%r2 # struct mmap_arg_struct_emu31 * jg old32_mmap # branch to system call - .globl sys32_munmap_wrapper + .globl sys32_munmap_wrapper sys32_munmap_wrapper: llgfr %r2,%r2 # unsigned long - llgfr %r3,%r3 # size_t + llgfr %r3,%r3 # size_t jg sys_munmap # branch to system call - .globl sys32_truncate_wrapper + .globl sys32_truncate_wrapper sys32_truncate_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # unsigned long jg sys_truncate # branch to system call - .globl sys32_ftruncate_wrapper + .globl sys32_ftruncate_wrapper sys32_ftruncate_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned long jg sys_ftruncate # branch to system call - .globl sys32_fchmod_wrapper + .globl sys32_fchmod_wrapper sys32_fchmod_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # mode_t jg sys_fchmod # branch to system call - .globl sys32_fchown16_wrapper + .globl sys32_fchown16_wrapper sys32_fchown16_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # compat_uid_t llgfr %r4,%r4 # compat_uid_t jg sys32_fchown16 # branch to system call - .globl sys32_getpriority_wrapper + .globl sys32_getpriority_wrapper sys32_getpriority_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int jg sys_getpriority # branch to system call - .globl sys32_setpriority_wrapper + .globl sys32_setpriority_wrapper sys32_setpriority_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int lgfr %r4,%r4 # int jg sys_setpriority # branch to system call - .globl compat_sys_statfs_wrapper + .globl compat_sys_statfs_wrapper compat_sys_statfs_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct compat_statfs * jg compat_sys_statfs # branch to system call - .globl compat_sys_fstatfs_wrapper + .globl compat_sys_fstatfs_wrapper compat_sys_fstatfs_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct compat_statfs * jg compat_sys_fstatfs # branch to system call - .globl compat_sys_socketcall_wrapper + .globl compat_sys_socketcall_wrapper compat_sys_socketcall_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # u32 * jg compat_sys_socketcall # branch to system call - .globl sys32_syslog_wrapper + .globl sys32_syslog_wrapper sys32_syslog_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # char * lgfr %r4,%r4 # int jg sys_syslog # branch to system call - .globl compat_sys_setitimer_wrapper + .globl compat_sys_setitimer_wrapper compat_sys_setitimer_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct itimerval_emu31 * llgtr %r4,%r4 # struct itimerval_emu31 * jg compat_sys_setitimer # branch to system call - .globl compat_sys_getitimer_wrapper + .globl compat_sys_getitimer_wrapper compat_sys_getitimer_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct itimerval_emu31 * jg compat_sys_getitimer # branch to system call - .globl compat_sys_newstat_wrapper + .globl compat_sys_newstat_wrapper compat_sys_newstat_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct stat_emu31 * jg compat_sys_newstat # branch to system call - .globl compat_sys_newlstat_wrapper + .globl compat_sys_newlstat_wrapper compat_sys_newlstat_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct stat_emu31 * jg compat_sys_newlstat # branch to system call - .globl compat_sys_newfstat_wrapper + .globl compat_sys_newfstat_wrapper compat_sys_newfstat_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct stat_emu31 * jg compat_sys_newfstat # branch to system call -#sys32_vhangup_wrapper # void +#sys32_vhangup_wrapper # void - .globl compat_sys_wait4_wrapper + .globl compat_sys_wait4_wrapper compat_sys_wait4_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # unsigned int * @@ -512,17 +512,17 @@ compat_sys_wait4_wrapper: llgtr %r5,%r5 # struct rusage * jg compat_sys_wait4 # branch to system call - .globl sys32_swapoff_wrapper + .globl sys32_swapoff_wrapper sys32_swapoff_wrapper: llgtr %r2,%r2 # const char * jg sys_swapoff # branch to system call - .globl sys32_sysinfo_wrapper + .globl sys32_sysinfo_wrapper sys32_sysinfo_wrapper: llgtr %r2,%r2 # struct sysinfo_emu31 * jg sys32_sysinfo # branch to system call - .globl sys32_ipc_wrapper + .globl sys32_ipc_wrapper sys32_ipc_wrapper: llgfr %r2,%r2 # uint lgfr %r3,%r3 # int @@ -531,59 +531,59 @@ sys32_ipc_wrapper: llgfr %r6,%r6 # u32 jg sys32_ipc # branch to system call - .globl sys32_fsync_wrapper + .globl sys32_fsync_wrapper sys32_fsync_wrapper: llgfr %r2,%r2 # unsigned int jg sys_fsync # branch to system call -#sys32_sigreturn_wrapper # done in sigreturn_glue +#sys32_sigreturn_wrapper # done in sigreturn_glue -#sys32_clone_wrapper # done in clone_glue +#sys32_clone_wrapper # done in clone_glue - .globl sys32_setdomainname_wrapper + .globl sys32_setdomainname_wrapper sys32_setdomainname_wrapper: llgtr %r2,%r2 # char * lgfr %r3,%r3 # int jg sys_setdomainname # branch to system call - .globl sys32_newuname_wrapper + .globl sys32_newuname_wrapper sys32_newuname_wrapper: llgtr %r2,%r2 # struct new_utsname * jg s390x_newuname # branch to system call - .globl compat_sys_adjtimex_wrapper + .globl compat_sys_adjtimex_wrapper compat_sys_adjtimex_wrapper: llgtr %r2,%r2 # struct compat_timex * jg compat_sys_adjtimex # branch to system call - .globl sys32_mprotect_wrapper + .globl sys32_mprotect_wrapper sys32_mprotect_wrapper: llgtr %r2,%r2 # unsigned long (actually pointer llgfr %r3,%r3 # size_t llgfr %r4,%r4 # unsigned long jg sys_mprotect # branch to system call - .globl compat_sys_sigprocmask_wrapper + .globl compat_sys_sigprocmask_wrapper compat_sys_sigprocmask_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # compat_old_sigset_t * llgtr %r4,%r4 # compat_old_sigset_t * jg compat_sys_sigprocmask # branch to system call - .globl sys32_init_module_wrapper + .globl sys32_init_module_wrapper sys32_init_module_wrapper: llgtr %r2,%r2 # void * llgfr %r3,%r3 # unsigned long llgtr %r4,%r4 # char * jg sys32_init_module # branch to system call - .globl sys32_delete_module_wrapper + .globl sys32_delete_module_wrapper sys32_delete_module_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # unsigned int jg sys32_delete_module # branch to system call - .globl sys32_quotactl_wrapper + .globl sys32_quotactl_wrapper sys32_quotactl_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # const char * @@ -591,45 +591,45 @@ sys32_quotactl_wrapper: llgtr %r5,%r5 # caddr_t jg sys_quotactl # branch to system call - .globl sys32_getpgid_wrapper + .globl sys32_getpgid_wrapper sys32_getpgid_wrapper: lgfr %r2,%r2 # pid_t jg sys_getpgid # branch to system call - .globl sys32_fchdir_wrapper + .globl sys32_fchdir_wrapper sys32_fchdir_wrapper: llgfr %r2,%r2 # unsigned int jg sys_fchdir # branch to system call - .globl sys32_bdflush_wrapper + .globl sys32_bdflush_wrapper sys32_bdflush_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # long jg sys_bdflush # branch to system call - .globl sys32_sysfs_wrapper + .globl sys32_sysfs_wrapper sys32_sysfs_wrapper: lgfr %r2,%r2 # int llgfr %r3,%r3 # unsigned long llgfr %r4,%r4 # unsigned long jg sys_sysfs # branch to system call - .globl sys32_personality_wrapper + .globl sys32_personality_wrapper sys32_personality_wrapper: llgfr %r2,%r2 # unsigned long jg s390x_personality # branch to system call - .globl sys32_setfsuid16_wrapper + .globl sys32_setfsuid16_wrapper sys32_setfsuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t jg sys32_setfsuid16 # branch to system call - .globl sys32_setfsgid16_wrapper + .globl sys32_setfsgid16_wrapper sys32_setfsgid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t jg sys32_setfsgid16 # branch to system call - .globl sys32_llseek_wrapper + .globl sys32_llseek_wrapper sys32_llseek_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned long @@ -638,14 +638,14 @@ sys32_llseek_wrapper: llgfr %r6,%r6 # unsigned int jg sys_llseek # branch to system call - .globl sys32_getdents_wrapper + .globl sys32_getdents_wrapper sys32_getdents_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # void * llgfr %r4,%r4 # unsigned int jg compat_sys_getdents # branch to system call - .globl compat_sys_select_wrapper + .globl compat_sys_select_wrapper compat_sys_select_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # compat_fd_set * @@ -654,113 +654,113 @@ compat_sys_select_wrapper: llgtr %r6,%r6 # struct compat_timeval * jg compat_sys_select # branch to system call - .globl sys32_flock_wrapper + .globl sys32_flock_wrapper sys32_flock_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned int jg sys_flock # branch to system call - .globl sys32_msync_wrapper + .globl sys32_msync_wrapper sys32_msync_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t lgfr %r4,%r4 # int jg sys_msync # branch to system call - .globl compat_sys_readv_wrapper + .globl compat_sys_readv_wrapper compat_sys_readv_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct compat_iovec * llgfr %r4,%r4 # unsigned long jg compat_sys_readv # branch to system call - .globl compat_sys_writev_wrapper + .globl compat_sys_writev_wrapper compat_sys_writev_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct compat_iovec * llgfr %r4,%r4 # unsigned long jg compat_sys_writev # branch to system call - .globl sys32_getsid_wrapper + .globl sys32_getsid_wrapper sys32_getsid_wrapper: lgfr %r2,%r2 # pid_t jg sys_getsid # branch to system call - .globl sys32_fdatasync_wrapper + .globl sys32_fdatasync_wrapper sys32_fdatasync_wrapper: llgfr %r2,%r2 # unsigned int jg sys_fdatasync # branch to system call -#sys32_sysctl_wrapper # tbd +#sys32_sysctl_wrapper # tbd - .globl sys32_mlock_wrapper + .globl sys32_mlock_wrapper sys32_mlock_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t jg sys_mlock # branch to system call - .globl sys32_munlock_wrapper + .globl sys32_munlock_wrapper sys32_munlock_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t jg sys_munlock # branch to system call - .globl sys32_mlockall_wrapper + .globl sys32_mlockall_wrapper sys32_mlockall_wrapper: lgfr %r2,%r2 # int jg sys_mlockall # branch to system call -#sys32_munlockall_wrapper # void +#sys32_munlockall_wrapper # void - .globl sys32_sched_setparam_wrapper + .globl sys32_sched_setparam_wrapper sys32_sched_setparam_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # struct sched_param * jg sys_sched_setparam # branch to system call - .globl sys32_sched_getparam_wrapper + .globl sys32_sched_getparam_wrapper sys32_sched_getparam_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # struct sched_param * jg sys_sched_getparam # branch to system call - .globl sys32_sched_setscheduler_wrapper + .globl sys32_sched_setscheduler_wrapper sys32_sched_setscheduler_wrapper: lgfr %r2,%r2 # pid_t lgfr %r3,%r3 # int llgtr %r4,%r4 # struct sched_param * jg sys_sched_setscheduler # branch to system call - .globl sys32_sched_getscheduler_wrapper + .globl sys32_sched_getscheduler_wrapper sys32_sched_getscheduler_wrapper: lgfr %r2,%r2 # pid_t jg sys_sched_getscheduler # branch to system call -#sys32_sched_yield_wrapper # void +#sys32_sched_yield_wrapper # void - .globl sys32_sched_get_priority_max_wrapper + .globl sys32_sched_get_priority_max_wrapper sys32_sched_get_priority_max_wrapper: lgfr %r2,%r2 # int jg sys_sched_get_priority_max # branch to system call - .globl sys32_sched_get_priority_min_wrapper + .globl sys32_sched_get_priority_min_wrapper sys32_sched_get_priority_min_wrapper: lgfr %r2,%r2 # int jg sys_sched_get_priority_min # branch to system call - .globl sys32_sched_rr_get_interval_wrapper + .globl sys32_sched_rr_get_interval_wrapper sys32_sched_rr_get_interval_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # struct compat_timespec * jg sys32_sched_rr_get_interval # branch to system call - .globl compat_sys_nanosleep_wrapper + .globl compat_sys_nanosleep_wrapper compat_sys_nanosleep_wrapper: llgtr %r2,%r2 # struct compat_timespec * llgtr %r3,%r3 # struct compat_timespec * jg compat_sys_nanosleep # branch to system call - .globl sys32_mremap_wrapper + .globl sys32_mremap_wrapper sys32_mremap_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # unsigned long @@ -769,49 +769,49 @@ sys32_mremap_wrapper: llgfr %r6,%r6 # unsigned long jg sys_mremap # branch to system call - .globl sys32_setresuid16_wrapper + .globl sys32_setresuid16_wrapper sys32_setresuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t - llgfr %r3,%r3 # __kernel_old_uid_emu31_t - llgfr %r4,%r4 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r4,%r4 # __kernel_old_uid_emu31_t jg sys32_setresuid16 # branch to system call - .globl sys32_getresuid16_wrapper + .globl sys32_getresuid16_wrapper sys32_getresuid16_wrapper: llgtr %r2,%r2 # __kernel_old_uid_emu31_t * llgtr %r3,%r3 # __kernel_old_uid_emu31_t * llgtr %r4,%r4 # __kernel_old_uid_emu31_t * jg sys32_getresuid16 # branch to system call - .globl sys32_poll_wrapper + .globl sys32_poll_wrapper sys32_poll_wrapper: - llgtr %r2,%r2 # struct pollfd * - llgfr %r3,%r3 # unsigned int - lgfr %r4,%r4 # long + llgtr %r2,%r2 # struct pollfd * + llgfr %r3,%r3 # unsigned int + lgfr %r4,%r4 # long jg sys_poll # branch to system call - .globl compat_sys_nfsservctl_wrapper + .globl compat_sys_nfsservctl_wrapper compat_sys_nfsservctl_wrapper: - lgfr %r2,%r2 # int + lgfr %r2,%r2 # int llgtr %r3,%r3 # struct compat_nfsctl_arg* llgtr %r4,%r4 # union compat_nfsctl_res* jg compat_sys_nfsservctl # branch to system call - .globl sys32_setresgid16_wrapper + .globl sys32_setresgid16_wrapper sys32_setresgid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t - llgfr %r3,%r3 # __kernel_old_gid_emu31_t - llgfr %r4,%r4 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r3,%r3 # __kernel_old_gid_emu31_t + llgfr %r4,%r4 # __kernel_old_gid_emu31_t jg sys32_setresgid16 # branch to system call - .globl sys32_getresgid16_wrapper + .globl sys32_getresgid16_wrapper sys32_getresgid16_wrapper: llgtr %r2,%r2 # __kernel_old_gid_emu31_t * llgtr %r3,%r3 # __kernel_old_gid_emu31_t * llgtr %r4,%r4 # __kernel_old_gid_emu31_t * jg sys32_getresgid16 # branch to system call - .globl sys32_prctl_wrapper + .globl sys32_prctl_wrapper sys32_prctl_wrapper: lgfr %r2,%r2 # int llgfr %r3,%r3 # unsigned long @@ -820,9 +820,9 @@ sys32_prctl_wrapper: llgfr %r6,%r6 # unsigned long jg sys_prctl # branch to system call -#sys32_rt_sigreturn_wrapper # done in rt_sigreturn_glue +#sys32_rt_sigreturn_wrapper # done in rt_sigreturn_glue - .globl sys32_rt_sigaction_wrapper + .globl sys32_rt_sigaction_wrapper sys32_rt_sigaction_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct sigaction_emu31 * @@ -830,7 +830,7 @@ sys32_rt_sigaction_wrapper: llgfr %r5,%r5 # size_t jg sys32_rt_sigaction # branch to system call - .globl sys32_rt_sigprocmask_wrapper + .globl sys32_rt_sigprocmask_wrapper sys32_rt_sigprocmask_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # old_sigset_emu31 * @@ -838,13 +838,13 @@ sys32_rt_sigprocmask_wrapper: llgfr %r5,%r5 # size_t jg sys32_rt_sigprocmask # branch to system call - .globl sys32_rt_sigpending_wrapper + .globl sys32_rt_sigpending_wrapper sys32_rt_sigpending_wrapper: llgtr %r2,%r2 # sigset_emu31 * llgfr %r3,%r3 # size_t jg sys32_rt_sigpending # branch to system call - .globl compat_sys_rt_sigtimedwait_wrapper + .globl compat_sys_rt_sigtimedwait_wrapper compat_sys_rt_sigtimedwait_wrapper: llgtr %r2,%r2 # const sigset_emu31_t * llgtr %r3,%r3 # siginfo_emu31_t * @@ -852,7 +852,7 @@ compat_sys_rt_sigtimedwait_wrapper: llgfr %r5,%r5 # size_t jg compat_sys_rt_sigtimedwait # branch to system call - .globl sys32_rt_sigqueueinfo_wrapper + .globl sys32_rt_sigqueueinfo_wrapper sys32_rt_sigqueueinfo_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -865,7 +865,7 @@ compat_sys_rt_sigsuspend_wrapper: llgfr %r3,%r3 # compat_size_t jg compat_sys_rt_sigsuspend - .globl sys32_pread64_wrapper + .globl sys32_pread64_wrapper sys32_pread64_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # char * @@ -874,7 +874,7 @@ sys32_pread64_wrapper: llgfr %r6,%r6 # u32 jg sys32_pread64 # branch to system call - .globl sys32_pwrite64_wrapper + .globl sys32_pwrite64_wrapper sys32_pwrite64_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # const char * @@ -883,26 +883,26 @@ sys32_pwrite64_wrapper: llgfr %r6,%r6 # u32 jg sys32_pwrite64 # branch to system call - .globl sys32_chown16_wrapper + .globl sys32_chown16_wrapper sys32_chown16_wrapper: llgtr %r2,%r2 # const char * - llgfr %r3,%r3 # __kernel_old_uid_emu31_t - llgfr %r4,%r4 # __kernel_old_gid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r4,%r4 # __kernel_old_gid_emu31_t jg sys32_chown16 # branch to system call - .globl sys32_getcwd_wrapper + .globl sys32_getcwd_wrapper sys32_getcwd_wrapper: llgtr %r2,%r2 # char * llgfr %r3,%r3 # unsigned long jg sys_getcwd # branch to system call - .globl sys32_capget_wrapper + .globl sys32_capget_wrapper sys32_capget_wrapper: llgtr %r2,%r2 # cap_user_header_t llgtr %r3,%r3 # cap_user_data_t jg sys_capget # branch to system call - .globl sys32_capset_wrapper + .globl sys32_capset_wrapper sys32_capset_wrapper: llgtr %r2,%r2 # cap_user_header_t llgtr %r3,%r3 # const cap_user_data_t @@ -910,11 +910,11 @@ sys32_capset_wrapper: .globl sys32_sigaltstack_wrapper sys32_sigaltstack_wrapper: - llgtr %r2,%r2 # const stack_emu31_t * - llgtr %r3,%r3 # stack_emu31_t * + llgtr %r2,%r2 # const stack_emu31_t * + llgtr %r3,%r3 # stack_emu31_t * jg sys32_sigaltstack - .globl sys32_sendfile_wrapper + .globl sys32_sendfile_wrapper sys32_sendfile_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -922,33 +922,33 @@ sys32_sendfile_wrapper: llgfr %r5,%r5 # size_t jg sys32_sendfile # branch to system call -#sys32_vfork_wrapper # done in vfork_glue +#sys32_vfork_wrapper # done in vfork_glue - .globl sys32_truncate64_wrapper + .globl sys32_truncate64_wrapper sys32_truncate64_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # unsigned long llgfr %r4,%r4 # unsigned long jg sys32_truncate64 # branch to system call - .globl sys32_ftruncate64_wrapper + .globl sys32_ftruncate64_wrapper sys32_ftruncate64_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned long llgfr %r4,%r4 # unsigned long jg sys32_ftruncate64 # branch to system call - .globl sys32_lchown_wrapper + .globl sys32_lchown_wrapper sys32_lchown_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # gid_t jg sys_lchown # branch to system call -#sys32_getuid_wrapper # void -#sys32_getgid_wrapper # void -#sys32_geteuid_wrapper # void -#sys32_getegid_wrapper # void +#sys32_getuid_wrapper # void +#sys32_getgid_wrapper # void +#sys32_geteuid_wrapper # void +#sys32_getegid_wrapper # void .globl sys32_setreuid_wrapper sys32_setreuid_wrapper: @@ -962,111 +962,111 @@ sys32_setregid_wrapper: llgfr %r3,%r3 # gid_t jg sys_setregid # branch to system call - .globl sys32_getgroups_wrapper + .globl sys32_getgroups_wrapper sys32_getgroups_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # gid_t * jg sys_getgroups # branch to system call - .globl sys32_setgroups_wrapper + .globl sys32_setgroups_wrapper sys32_setgroups_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # gid_t * jg sys_setgroups # branch to system call - .globl sys32_fchown_wrapper + .globl sys32_fchown_wrapper sys32_fchown_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # gid_t jg sys_fchown # branch to system call - .globl sys32_setresuid_wrapper + .globl sys32_setresuid_wrapper sys32_setresuid_wrapper: llgfr %r2,%r2 # uid_t llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # uid_t jg sys_setresuid # branch to system call - .globl sys32_getresuid_wrapper + .globl sys32_getresuid_wrapper sys32_getresuid_wrapper: llgtr %r2,%r2 # uid_t * llgtr %r3,%r3 # uid_t * llgtr %r4,%r4 # uid_t * jg sys_getresuid # branch to system call - .globl sys32_setresgid_wrapper + .globl sys32_setresgid_wrapper sys32_setresgid_wrapper: llgfr %r2,%r2 # gid_t llgfr %r3,%r3 # gid_t llgfr %r4,%r4 # gid_t jg sys_setresgid # branch to system call - .globl sys32_getresgid_wrapper + .globl sys32_getresgid_wrapper sys32_getresgid_wrapper: llgtr %r2,%r2 # gid_t * llgtr %r3,%r3 # gid_t * llgtr %r4,%r4 # gid_t * jg sys_getresgid # branch to system call - .globl sys32_chown_wrapper + .globl sys32_chown_wrapper sys32_chown_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # gid_t jg sys_chown # branch to system call - .globl sys32_setuid_wrapper + .globl sys32_setuid_wrapper sys32_setuid_wrapper: llgfr %r2,%r2 # uid_t jg sys_setuid # branch to system call - .globl sys32_setgid_wrapper + .globl sys32_setgid_wrapper sys32_setgid_wrapper: llgfr %r2,%r2 # gid_t jg sys_setgid # branch to system call - .globl sys32_setfsuid_wrapper + .globl sys32_setfsuid_wrapper sys32_setfsuid_wrapper: llgfr %r2,%r2 # uid_t jg sys_setfsuid # branch to system call - .globl sys32_setfsgid_wrapper + .globl sys32_setfsgid_wrapper sys32_setfsgid_wrapper: llgfr %r2,%r2 # gid_t jg sys_setfsgid # branch to system call - .globl sys32_pivot_root_wrapper + .globl sys32_pivot_root_wrapper sys32_pivot_root_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_pivot_root # branch to system call - .globl sys32_mincore_wrapper + .globl sys32_mincore_wrapper sys32_mincore_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t llgtr %r4,%r4 # unsigned char * jg sys_mincore # branch to system call - .globl sys32_madvise_wrapper + .globl sys32_madvise_wrapper sys32_madvise_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t lgfr %r4,%r4 # int jg sys_madvise # branch to system call - .globl sys32_getdents64_wrapper + .globl sys32_getdents64_wrapper sys32_getdents64_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # void * llgfr %r4,%r4 # unsigned int jg sys_getdents64 # branch to system call - .globl compat_sys_fcntl64_wrapper + .globl compat_sys_fcntl64_wrapper compat_sys_fcntl64_wrapper: llgfr %r2,%r2 # unsigned int - llgfr %r3,%r3 # unsigned int + llgfr %r3,%r3 # unsigned int llgfr %r4,%r4 # unsigned long jg compat_sys_fcntl64 # branch to system call @@ -1087,10 +1087,10 @@ sys32_stime_wrapper: llgtr %r2,%r2 # long * jg compat_sys_stime # branch to system call - .globl sys32_sysctl_wrapper + .globl sys32_sysctl_wrapper sys32_sysctl_wrapper: - llgtr %r2,%r2 # struct __sysctl_args32 * - jg sys32_sysctl + llgtr %r2,%r2 # struct __sysctl_args32 * + jg sys32_sysctl .globl sys32_fstat64_wrapper sys32_fstat64_wrapper: @@ -1098,7 +1098,7 @@ sys32_fstat64_wrapper: llgtr %r3,%r3 # struct stat64 * jg sys32_fstat64 # branch to system call - .globl compat_sys_futex_wrapper + .globl compat_sys_futex_wrapper compat_sys_futex_wrapper: llgtr %r2,%r2 # u32 * lgfr %r3,%r3 # int @@ -1213,22 +1213,22 @@ sys32_sched_getaffinity_wrapper: llgtr %r4,%r4 # unsigned long * jg compat_sys_sched_getaffinity - .globl sys32_exit_group_wrapper + .globl sys32_exit_group_wrapper sys32_exit_group_wrapper: lgfr %r2,%r2 # int jg sys_exit_group # branch to system call - .globl sys32_set_tid_address_wrapper + .globl sys32_set_tid_address_wrapper sys32_set_tid_address_wrapper: llgtr %r2,%r2 # int * jg sys_set_tid_address # branch to system call - .globl sys_epoll_create_wrapper + .globl sys_epoll_create_wrapper sys_epoll_create_wrapper: lgfr %r2,%r2 # int jg sys_epoll_create # branch to system call - .globl sys_epoll_ctl_wrapper + .globl sys_epoll_ctl_wrapper sys_epoll_ctl_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -1236,7 +1236,7 @@ sys_epoll_ctl_wrapper: llgtr %r5,%r5 # struct epoll_event * jg sys_epoll_ctl # branch to system call - .globl sys_epoll_wait_wrapper + .globl sys_epoll_wait_wrapper sys_epoll_wait_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct epoll_event * diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c index 4ef44e536b2..1eae74e72f9 100644 --- a/arch/s390/kernel/cpcmd.c +++ b/arch/s390/kernel/cpcmd.c @@ -25,11 +25,8 @@ static char cpcmd_buf[241]; */ int __cpcmd(const char *cmd, char *response, int rlen, int *response_code) { - const int mask = 0x40000000L; - unsigned long flags; - int return_code; - int return_len; - int cmdlen; + unsigned long flags, cmdlen; + int return_code, return_len; spin_lock_irqsave(&cpcmd_lock, flags); cmdlen = strlen(cmd); @@ -38,64 +35,44 @@ int __cpcmd(const char *cmd, char *response, int rlen, int *response_code) ASCEBC(cpcmd_buf, cmdlen); if (response != NULL && rlen > 0) { + register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf; + register unsigned long reg3 asm ("3") = (addr_t) response; + register unsigned long reg4 asm ("4") = cmdlen | 0x40000000L; + register unsigned long reg5 asm ("5") = rlen; + memset(response, 0, rlen); + asm volatile( #ifndef CONFIG_64BIT - asm volatile ( "lra 2,0(%2)\n" - "lr 4,%3\n" - "o 4,%6\n" - "lra 3,0(%4)\n" - "lr 5,%5\n" - "diag 2,4,0x8\n" - "brc 8, 1f\n" - "ar 5, %5\n" - "1: \n" - "lr %0,4\n" - "lr %1,5\n" - : "=d" (return_code), "=d" (return_len) - : "a" (cpcmd_buf), "d" (cmdlen), - "a" (response), "d" (rlen), "m" (mask) - : "cc", "2", "3", "4", "5" ); + " diag %2,%0,0x8\n" + " brc 8,1f\n" + " ar %1,%4\n" #else /* CONFIG_64BIT */ - asm volatile ( "lrag 2,0(%2)\n" - "lgr 4,%3\n" - "o 4,%6\n" - "lrag 3,0(%4)\n" - "lgr 5,%5\n" - "sam31\n" - "diag 2,4,0x8\n" - "sam64\n" - "brc 8, 1f\n" - "agr 5, %5\n" - "1: \n" - "lgr %0,4\n" - "lgr %1,5\n" - : "=d" (return_code), "=d" (return_len) - : "a" (cpcmd_buf), "d" (cmdlen), - "a" (response), "d" (rlen), "m" (mask) - : "cc", "2", "3", "4", "5" ); + " sam31\n" + " diag %2,%0,0x8\n" + " sam64\n" + " brc 8,1f\n" + " agr %1,%4\n" #endif /* CONFIG_64BIT */ + "1:\n" + : "+d" (reg4), "+d" (reg5) + : "d" (reg2), "d" (reg3), "d" (rlen) : "cc"); + return_code = (int) reg4; + return_len = (int) reg5; EBCASC(response, rlen); } else { + register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf; + register unsigned long reg3 asm ("3") = cmdlen; return_len = 0; + asm volatile( #ifndef CONFIG_64BIT - asm volatile ( "lra 2,0(%1)\n" - "lr 3,%2\n" - "diag 2,3,0x8\n" - "lr %0,3\n" - : "=d" (return_code) - : "a" (cpcmd_buf), "d" (cmdlen) - : "2", "3" ); + " diag %1,%0,0x8\n" #else /* CONFIG_64BIT */ - asm volatile ( "lrag 2,0(%1)\n" - "lgr 3,%2\n" - "sam31\n" - "diag 2,3,0x8\n" - "sam64\n" - "lgr %0,3\n" - : "=d" (return_code) - : "a" (cpcmd_buf), "d" (cmdlen) - : "2", "3" ); + " sam31\n" + " diag %1,%0,0x8\n" + " sam64\n" #endif /* CONFIG_64BIT */ + : "+d" (reg3) : "d" (reg2) : "cc"); + return_code = (int) reg3; } spin_unlock_irqrestore(&cpcmd_lock, flags); if (response_code != NULL) diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 7ba20922a53..43f3d0c7e13 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -603,7 +603,7 @@ debug_open(struct inode *inode, struct file *file) debug_info_t *debug_info, *debug_info_snapshot; down(&debug_lock); - debug_info = (struct debug_info*)file->f_dentry->d_inode->u.generic_ip; + debug_info = file->f_dentry->d_inode->i_private; /* find debug view */ for (i = 0; i < DEBUG_MAX_VIEWS; i++) { if (!debug_info->views[i]) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 0c712b78a7e..dddc3de3040 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -4,8 +4,8 @@ * * Copyright (C) IBM Corp. 1999,2006 * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Hartmut Penner (hp@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Hartmut Penner (hp@de.ibm.com), + * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), * Heiko Carstens <heiko.carstens@de.ibm.com> */ @@ -24,29 +24,29 @@ * Stack layout for the system_call stack entry. * The first few entries are identical to the user_regs_struct. */ -SP_PTREGS = STACK_FRAME_OVERHEAD -SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS -SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW -SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS -SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 4 -SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 -SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 12 -SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 -SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 20 -SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 -SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 28 -SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 -SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 36 -SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 -SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 44 -SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 -SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 52 -SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 -SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 -SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 -SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP -SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE +SP_PTREGS = STACK_FRAME_OVERHEAD +SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS +SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW +SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS +SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 4 +SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 +SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 12 +SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 +SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 20 +SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 +SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 28 +SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 +SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 36 +SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 +SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 44 +SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 +SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 52 +SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 +SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 +SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 +SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC +SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP ) @@ -81,14 +81,14 @@ STACK_SIZE = 1 << STACK_SHIFT * R15 - kernel stack pointer */ - .macro STORE_TIMER lc_offset + .macro STORE_TIMER lc_offset #ifdef CONFIG_VIRT_CPU_ACCOUNTING stpt \lc_offset #endif .endm #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .macro UPDATE_VTIME lc_from,lc_to,lc_sum + .macro UPDATE_VTIME lc_from,lc_to,lc_sum lm %r10,%r11,\lc_from sl %r10,\lc_to sl %r11,\lc_to+4 @@ -147,7 +147,7 @@ STACK_SIZE = 1 << STACK_SHIFT 2: .endm - .macro CREATE_STACK_FRAME psworg,savearea + .macro CREATE_STACK_FRAME psworg,savearea s %r15,BASED(.Lc_spsize) # make room for registers & psw mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack la %r12,\psworg @@ -160,7 +160,7 @@ STACK_SIZE = 1 << STACK_SHIFT st %r12,__SF_BACKCHAIN(%r15) # clear back chain .endm - .macro RESTORE_ALL psworg,sync + .macro RESTORE_ALL psworg,sync mvc \psworg(8),SP_PSW(%r15) # move user PSW to lowcore .if !\sync ni \psworg+1,0xfd # clear wait state bit @@ -177,16 +177,16 @@ STACK_SIZE = 1 << STACK_SHIFT * Returns: * gpr2 = prev */ - .globl __switch_to + .globl __switch_to __switch_to: - basr %r1,0 + basr %r1,0 __switch_to_base: tm __THREAD_per(%r3),0xe8 # new process is using per ? bz __switch_to_noper-__switch_to_base(%r1) # if not we're fine - stctl %c9,%c11,__SF_EMPTY(%r15) # We are using per stuff - clc __THREAD_per(12,%r3),__SF_EMPTY(%r15) - be __switch_to_noper-__switch_to_base(%r1) # we got away w/o bashing TLB's - lctl %c9,%c11,__THREAD_per(%r3) # Nope we didn't + stctl %c9,%c11,__SF_EMPTY(%r15) # We are using per stuff + clc __THREAD_per(12,%r3),__SF_EMPTY(%r15) + be __switch_to_noper-__switch_to_base(%r1) # we got away w/o bashing TLB's + lctl %c9,%c11,__THREAD_per(%r3) # Nope we didn't __switch_to_noper: l %r4,__THREAD_info(%r2) # get thread_info of prev tm __TI_flags+3(%r4),_TIF_MCCK_PENDING # machine check pending? @@ -195,13 +195,13 @@ __switch_to_noper: l %r4,__THREAD_info(%r3) # get thread_info of next oi __TI_flags+3(%r4),_TIF_MCCK_PENDING # set it in next __switch_to_no_mcck: - stm %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task + stm %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task st %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp l %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp lm %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task st %r3,__LC_CURRENT # __LC_CURRENT = current task struct lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 - l %r3,__THREAD_info(%r3) # load thread_info from task struct + l %r3,__THREAD_info(%r3) # load thread_info from task struct st %r3,__LC_THREAD_INFO ahi %r3,STACK_SIZE st %r3,__LC_KERNEL_STACK # __LC_KERNEL_STACK = new kernel stack @@ -213,7 +213,7 @@ __critical_start: * are executed with interrupts enabled. */ - .globl system_call + .globl system_call system_call: STORE_TIMER __LC_SYNC_ENTER_TIMER sysc_saveall: @@ -233,24 +233,24 @@ sysc_update: #endif sysc_do_svc: l %r9,__LC_THREAD_INFO # load pointer to thread_info struct - sla %r7,2 # *4 and test for svc 0 - bnz BASED(sysc_nr_ok) # svc number > 0 + sla %r7,2 # *4 and test for svc 0 + bnz BASED(sysc_nr_ok) # svc number > 0 # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) bnl BASED(sysc_nr_ok) - lr %r7,%r1 # copy svc number to %r7 - sla %r7,2 # *4 + lr %r7,%r1 # copy svc number to %r7 + sla %r7,2 # *4 sysc_nr_ok: mvc SP_ARGS(4,%r15),SP_R7(%r15) sysc_do_restart: l %r8,BASED(.Lsysc_table) tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) l %r8,0(%r7,%r8) # get system call addr. - bnz BASED(sysc_tracesys) - basr %r14,%r8 # call sys_xxxx - st %r2,SP_R2(%r15) # store return value (change R2 on stack) - # ATTENTION: check sys_execve_glue before - # changing anything here !! + bnz BASED(sysc_tracesys) + basr %r14,%r8 # call sys_xxxx + st %r2,SP_R2(%r15) # store return value (change R2 on stack) + # ATTENTION: check sys_execve_glue before + # changing anything here !! sysc_return: tm SP_PSW+1(%r15),0x01 # returning to user ? @@ -258,14 +258,14 @@ sysc_return: tm __TI_flags+3(%r9),_TIF_WORK_SVC bnz BASED(sysc_work) # there is work to do (signals etc.) sysc_leave: - RESTORE_ALL __LC_RETURN_PSW,1 + RESTORE_ALL __LC_RETURN_PSW,1 # # recheck if there is more work to do # sysc_work_loop: tm __TI_flags+3(%r9),_TIF_WORK_SVC - bz BASED(sysc_leave) # there is no work to do + bz BASED(sysc_leave) # there is no work to do # # One of the work bits is on. Find out which one. # @@ -284,11 +284,11 @@ sysc_work: # # _TIF_NEED_RESCHED is set, call schedule -# -sysc_reschedule: - l %r1,BASED(.Lschedule) - la %r14,BASED(sysc_work_loop) - br %r1 # call scheduler +# +sysc_reschedule: + l %r1,BASED(.Lschedule) + la %r14,BASED(sysc_work_loop) + br %r1 # call scheduler # # _TIF_MCCK_PENDING is set, call handler @@ -301,11 +301,11 @@ sysc_mcck_pending: # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -sysc_sigpending: +sysc_sigpending: ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ldo_signal) - basr %r14,%r1 # call do_signal + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ldo_signal) + basr %r14,%r1 # call do_signal tm __TI_flags+3(%r9),_TIF_RESTART_SVC bo BASED(sysc_restart) tm __TI_flags+3(%r9),_TIF_SINGLE_STEP @@ -317,11 +317,11 @@ sysc_sigpending: # sysc_restart: ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC - l %r7,SP_R2(%r15) # load new svc number + l %r7,SP_R2(%r15) # load new svc number sla %r7,2 mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument - lm %r2,%r6,SP_R2(%r15) # load svc arguments - b BASED(sysc_do_restart) # restart svc + lm %r2,%r6,SP_R2(%r15) # load svc arguments + b BASED(sysc_do_restart) # restart svc # # _TIF_SINGLE_STEP is set, call do_single_step @@ -338,8 +338,8 @@ sysc_singlestep: # call trace before and after sys_call # sysc_tracesys: - l %r1,BASED(.Ltrace) - la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ltrace) + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,0 srl %r7,2 st %r7,SP_R2(%r15) @@ -347,19 +347,19 @@ sysc_tracesys: clc SP_R2(4,%r15),BASED(.Lnr_syscalls) bnl BASED(sysc_tracenogo) l %r8,BASED(.Lsysc_table) - l %r7,SP_R2(%r15) # strace might have changed the - sll %r7,2 # system call + l %r7,SP_R2(%r15) # strace might have changed the + sll %r7,2 # system call l %r8,0(%r7,%r8) sysc_tracego: lm %r3,%r6,SP_R3(%r15) l %r2,SP_ORIG_R2(%r15) - basr %r14,%r8 # call sys_xxx - st %r2,SP_R2(%r15) # store return value + basr %r14,%r8 # call sys_xxx + st %r2,SP_R2(%r15) # store return value sysc_tracenogo: tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) - bz BASED(sysc_return) + bz BASED(sysc_return) l %r1,BASED(.Ltrace) - la %r2,SP_PTREGS(%r15) # load pt_regs + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,1 la %r14,BASED(sysc_return) br %r1 @@ -367,17 +367,17 @@ sysc_tracenogo: # # a new process exits the kernel with ret_from_fork # - .globl ret_from_fork + .globl ret_from_fork ret_from_fork: l %r13,__LC_SVC_NEW_PSW+4 l %r9,__LC_THREAD_INFO # load pointer to thread_info struct tm SP_PSW+1(%r15),0x01 # forking a kernel thread ? bo BASED(0f) st %r15,SP_R15(%r15) # store stack pointer for new kthread -0: l %r1,BASED(.Lschedtail) - basr %r14,%r1 +0: l %r1,BASED(.Lschedtail) + basr %r14,%r1 TRACE_IRQS_ON - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts b BASED(sysc_return) # @@ -386,52 +386,51 @@ ret_from_fork: # but are called with different parameter. # return-address is set up above # -sys_clone_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lclone) - br %r1 # branch to sys_clone - -sys_fork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lfork) - br %r1 # branch to sys_fork - -sys_vfork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lvfork) - br %r1 # branch to sys_vfork - -sys_execve_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lexecve) - lr %r12,%r14 # save return address - basr %r14,%r1 # call sys_execve - ltr %r2,%r2 # check if execve failed - bnz 0(%r12) # it did fail -> store result in gpr2 - b 4(%r12) # SKIP ST 2,SP_R2(15) after BASR 14,8 - # in system_call/sysc_tracesys - -sys_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - l %r1,BASED(.Lsigreturn) - br %r1 # branch to sys_sigreturn - -sys_rt_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - l %r1,BASED(.Lrt_sigreturn) - br %r1 # branch to sys_sigreturn +sys_clone_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lclone) + br %r1 # branch to sys_clone -sys_sigaltstack_glue: - la %r4,SP_PTREGS(%r15) # load pt_regs as parameter - l %r1,BASED(.Lsigaltstack) - br %r1 # branch to sys_sigreturn +sys_fork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lfork) + br %r1 # branch to sys_fork +sys_vfork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lvfork) + br %r1 # branch to sys_vfork + +sys_execve_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lexecve) + lr %r12,%r14 # save return address + basr %r14,%r1 # call sys_execve + ltr %r2,%r2 # check if execve failed + bnz 0(%r12) # it did fail -> store result in gpr2 + b 4(%r12) # SKIP ST 2,SP_R2(15) after BASR 14,8 + # in system_call/sysc_tracesys + +sys_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + l %r1,BASED(.Lsigreturn) + br %r1 # branch to sys_sigreturn + +sys_rt_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + l %r1,BASED(.Lrt_sigreturn) + br %r1 # branch to sys_sigreturn + +sys_sigaltstack_glue: + la %r4,SP_PTREGS(%r15) # load pt_regs as parameter + l %r1,BASED(.Lsigaltstack) + br %r1 # branch to sys_sigreturn /* * Program check handler routine */ - .globl pgm_check_handler + .globl pgm_check_handler pgm_check_handler: /* * First we need to check for a special case: @@ -448,8 +447,8 @@ pgm_check_handler: */ STORE_TIMER __LC_SYNC_ENTER_TIMER SAVE_ALL_BASE __LC_SAVE_AREA - tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception - bnz BASED(pgm_per) # got per exception -> special case + tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception + bnz BASED(pgm_per) # got per exception -> special case SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -461,29 +460,29 @@ pgm_check_handler: pgm_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct - l %r3,__LC_PGM_ILC # load program interruption code + l %r3,__LC_PGM_ILC # load program interruption code la %r8,0x7f nr %r8,%r3 pgm_do_call: - l %r7,BASED(.Ljump_table) - sll %r8,2 - l %r7,0(%r8,%r7) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area - la %r14,BASED(sysc_return) - br %r7 # branch to interrupt-handler + l %r7,BASED(.Ljump_table) + sll %r8,2 + l %r7,0(%r8,%r7) # load address of handler routine + la %r2,SP_PTREGS(%r15) # address of register-save area + la %r14,BASED(sysc_return) + br %r7 # branch to interrupt-handler # # handle per exception # pgm_per: - tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on - bnz BASED(pgm_per_std) # ok, normal per event from user space + tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on + bnz BASED(pgm_per_std) # ok, normal per event from user space # ok its one of the special cases, now we need to find out which one - clc __LC_PGM_OLD_PSW(8),__LC_SVC_NEW_PSW - be BASED(pgm_svcper) + clc __LC_PGM_OLD_PSW(8),__LC_SVC_NEW_PSW + be BASED(pgm_svcper) # no interesting special case, ignore PER event - lm %r12,%r15,__LC_SAVE_AREA - lpsw 0x28 + lm %r12,%r15,__LC_SAVE_AREA + lpsw 0x28 # # Normal per exception @@ -507,10 +506,10 @@ pgm_no_vtime2: oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP tm SP_PSW+1(%r15),0x01 # kernel per event ? bz BASED(kernel_per) - l %r3,__LC_PGM_ILC # load program interruption code + l %r3,__LC_PGM_ILC # load program interruption code la %r8,0x7f - nr %r8,%r3 # clear per-event-bit and ilc - be BASED(sysc_return) # only per or per+check ? + nr %r8,%r3 # clear per-event-bit and ilc + be BASED(sysc_return) # only per or per+check ? b BASED(pgm_do_call) # @@ -552,7 +551,7 @@ kernel_per: * IO interrupt handler routine */ - .globl io_int_handler + .globl io_int_handler io_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -569,42 +568,42 @@ io_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - l %r1,BASED(.Ldo_IRQ) # load address of do_IRQ - la %r2,SP_PTREGS(%r15) # address of register-save area - basr %r14,%r1 # branch to standard irq handler + l %r1,BASED(.Ldo_IRQ) # load address of do_IRQ + la %r2,SP_PTREGS(%r15) # address of register-save area + basr %r14,%r1 # branch to standard irq handler TRACE_IRQS_ON io_return: - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm SP_PSW+1(%r15),0x01 # returning to user ? #ifdef CONFIG_PREEMPT - bno BASED(io_preempt) # no -> check for preemptive scheduling + bno BASED(io_preempt) # no -> check for preemptive scheduling #else - bno BASED(io_leave) # no-> skip resched & signal + bno BASED(io_leave) # no-> skip resched & signal #endif tm __TI_flags+3(%r9),_TIF_WORK_INT - bnz BASED(io_work) # there is work to do (signals etc.) + bnz BASED(io_work) # there is work to do (signals etc.) io_leave: - RESTORE_ALL __LC_RETURN_PSW,0 + RESTORE_ALL __LC_RETURN_PSW,0 io_done: #ifdef CONFIG_PREEMPT io_preempt: icm %r0,15,__TI_precount(%r9) - bnz BASED(io_leave) + bnz BASED(io_leave) l %r1,SP_R15(%r15) s %r1,BASED(.Lc_spsize) mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain lr %r15,%r1 io_resume_loop: tm __TI_flags+3(%r9),_TIF_NEED_RESCHED bno BASED(io_leave) - mvc __TI_precount(4,%r9),BASED(.Lc_pactive) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - l %r1,BASED(.Lschedule) + mvc __TI_precount(4,%r9),BASED(.Lc_pactive) + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + l %r1,BASED(.Lschedule) basr %r14,%r1 # call schedule - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - xc __TI_precount(4,%r9),__TI_precount(%r9) + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + xc __TI_precount(4,%r9),__TI_precount(%r9) b BASED(io_resume_loop) #endif @@ -615,16 +614,16 @@ io_work: l %r1,__LC_KERNEL_STACK s %r1,BASED(.Lc_spsize) mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain lr %r15,%r1 # # One of the work bits is on. Find out which one. # Checked are: _TIF_SIGPENDING, _TIF_RESTORE_SIGMASK, _TIF_NEED_RESCHED -# and _TIF_MCCK_PENDING +# and _TIF_MCCK_PENDING # io_work_loop: tm __TI_flags+3(%r9),_TIF_MCCK_PENDING - bo BASED(io_mcck_pending) + bo BASED(io_mcck_pending) tm __TI_flags+3(%r9),_TIF_NEED_RESCHED bo BASED(io_reschedule) tm __TI_flags+3(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK) @@ -637,36 +636,36 @@ io_work_loop: io_mcck_pending: l %r1,BASED(.Ls390_handle_mcck) la %r14,BASED(io_work_loop) - br %r1 # TIF bit will be cleared by handler + br %r1 # TIF bit will be cleared by handler # # _TIF_NEED_RESCHED is set, call schedule -# -io_reschedule: - l %r1,BASED(.Lschedule) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - basr %r14,%r1 # call scheduler - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts +# +io_reschedule: + l %r1,BASED(.Lschedule) + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + basr %r14,%r1 # call scheduler + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts tm __TI_flags+3(%r9),_TIF_WORK_INT - bz BASED(io_leave) # there is no work to do + bz BASED(io_leave) # there is no work to do b BASED(io_work_loop) # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -io_sigpending: - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ldo_signal) - basr %r14,%r1 # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts +io_sigpending: + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ldo_signal) + basr %r14,%r1 # call do_signal + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts b BASED(io_work_loop) /* * External interrupt handler routine */ - .globl ext_int_handler + .globl ext_int_handler ext_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -683,8 +682,8 @@ ext_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - lh %r3,__LC_EXT_INT_CODE # get interruption code + la %r2,SP_PTREGS(%r15) # address of register-save area + lh %r3,__LC_EXT_INT_CODE # get interruption code l %r1,BASED(.Ldo_extint) basr %r14,%r1 TRACE_IRQS_ON @@ -696,13 +695,13 @@ __critical_end: * Machine check handler routines */ - .globl mcck_int_handler + .globl mcck_int_handler mcck_int_handler: spt __LC_CPU_TIMER_SAVE_AREA # revalidate cpu timer lm %r0,%r15,__LC_GPREGS_SAVE_AREA # revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+32 la %r12,__LC_MCK_OLD_PSW - tm __LC_MCCK_CODE,0x80 # system damage? + tm __LC_MCCK_CODE,0x80 # system damage? bo BASED(mcck_int_main) # yes -> rest of mcck code invalid #ifdef CONFIG_VIRT_CPU_ACCOUNTING mvc __LC_SAVE_AREA+52(8),__LC_ASYNC_ENTER_TIMER @@ -741,7 +740,7 @@ mcck_int_main: l %r15,__LC_PANIC_STACK # load panic stack 0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+32 #ifdef CONFIG_VIRT_CPU_ACCOUNTING - tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? + tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? bno BASED(mcck_no_vtime) # no -> skip cleanup critical tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(mcck_no_vtime) @@ -752,14 +751,14 @@ mcck_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ls390_mcck) - basr %r14,%r1 # call machine check handler - tm SP_PSW+1(%r15),0x01 # returning to user ? + l %r1,BASED(.Ls390_mcck) + basr %r14,%r1 # call machine check handler + tm SP_PSW+1(%r15),0x01 # returning to user ? bno BASED(mcck_return) - l %r1,__LC_KERNEL_STACK # switch to kernel stack + l %r1,__LC_KERNEL_STACK # switch to kernel stack s %r1,BASED(.Lc_spsize) mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain lr %r15,%r1 stosm __SF_EMPTY(%r15),0x04 # turn dat on tm __TI_flags+3(%r9),_TIF_MCCK_PENDING @@ -783,36 +782,36 @@ mcck_return: lm %r0,%r15,SP_R0(%r15) # load gprs 0-15 lpsw __LC_RETURN_MCCK_PSW # back to caller - RESTORE_ALL __LC_RETURN_MCCK_PSW,0 + RESTORE_ALL __LC_RETURN_MCCK_PSW,0 #ifdef CONFIG_SMP /* * Restart interruption handler, kick starter for additional CPUs */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - l %r15,__LC_SAVE_AREA+60 # load ksp - lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs - lam %a0,%a15,__LC_AREGS_SAVE_AREA - lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone - stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on - basr %r14,0 - l %r14,restart_addr-.(%r14) - br %r14 # branch to start_secondary + l %r15,__LC_SAVE_AREA+60 # load ksp + lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs + lam %a0,%a15,__LC_AREGS_SAVE_AREA + lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone + stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on + basr %r14,0 + l %r14,restart_addr-.(%r14) + br %r14 # branch to start_secondary restart_addr: - .long start_secondary + .long start_secondary #else /* * If we do not run with SMP enabled, let the new CPU crash ... */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - basr %r1,0 + basr %r1,0 restart_base: - lpsw restart_crash-restart_base(%r1) - .align 8 + lpsw restart_crash-restart_base(%r1) + .align 8 restart_crash: - .long 0x000a0000,0x00000000 + .long 0x000a0000,0x00000000 restart_go: #endif @@ -834,11 +833,11 @@ stack_overflow: be BASED(0f) la %r1,__LC_SAVE_AREA+16 0: mvc SP_R12(16,%r15),0(%r1) # move %r12-%r15 to stack - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear back chain + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear back chain l %r1,BASED(1f) # branch to kernel_stack_overflow - la %r2,SP_PTREGS(%r15) # load pt_regs + la %r2,SP_PTREGS(%r15) # load pt_regs br %r1 -1: .long kernel_stack_overflow +1: .long kernel_stack_overflow #endif cleanup_table_system_call: @@ -940,10 +939,10 @@ cleanup_novtime: cleanup_system_call_insn: .long sysc_saveall + 0x80000000 #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .long system_call + 0x80000000 - .long sysc_vtime + 0x80000000 - .long sysc_stime + 0x80000000 - .long sysc_update + 0x80000000 + .long system_call + 0x80000000 + .long sysc_vtime + 0x80000000 + .long sysc_stime + 0x80000000 + .long sysc_update + 0x80000000 #endif cleanup_sysc_return: @@ -1009,57 +1008,57 @@ cleanup_io_leave_insn: /* * Integer constants */ - .align 4 -.Lc_spsize: .long SP_SIZE -.Lc_overhead: .long STACK_FRAME_OVERHEAD -.Lc_pactive: .long PREEMPT_ACTIVE -.Lnr_syscalls: .long NR_syscalls -.L0x018: .short 0x018 -.L0x020: .short 0x020 -.L0x028: .short 0x028 -.L0x030: .short 0x030 -.L0x038: .short 0x038 -.Lc_1: .long 1 + .align 4 +.Lc_spsize: .long SP_SIZE +.Lc_overhead: .long STACK_FRAME_OVERHEAD +.Lc_pactive: .long PREEMPT_ACTIVE +.Lnr_syscalls: .long NR_syscalls +.L0x018: .short 0x018 +.L0x020: .short 0x020 +.L0x028: .short 0x028 +.L0x030: .short 0x030 +.L0x038: .short 0x038 +.Lc_1: .long 1 /* * Symbol constants */ -.Ls390_mcck: .long s390_do_machine_check +.Ls390_mcck: .long s390_do_machine_check .Ls390_handle_mcck: - .long s390_handle_mcck -.Lmck_old_psw: .long __LC_MCK_OLD_PSW -.Ldo_IRQ: .long do_IRQ -.Ldo_extint: .long do_extint -.Ldo_signal: .long do_signal -.Lhandle_per: .long do_single_step -.Ljump_table: .long pgm_check_table -.Lschedule: .long schedule -.Lclone: .long sys_clone -.Lexecve: .long sys_execve -.Lfork: .long sys_fork -.Lrt_sigreturn:.long sys_rt_sigreturn + .long s390_handle_mcck +.Lmck_old_psw: .long __LC_MCK_OLD_PSW +.Ldo_IRQ: .long do_IRQ +.Ldo_extint: .long do_extint +.Ldo_signal: .long do_signal +.Lhandle_per: .long do_single_step +.Ljump_table: .long pgm_check_table +.Lschedule: .long schedule +.Lclone: .long sys_clone +.Lexecve: .long sys_execve +.Lfork: .long sys_fork +.Lrt_sigreturn: .long sys_rt_sigreturn .Lrt_sigsuspend: - .long sys_rt_sigsuspend -.Lsigreturn: .long sys_sigreturn -.Lsigsuspend: .long sys_sigsuspend -.Lsigaltstack: .long sys_sigaltstack -.Ltrace: .long syscall_trace -.Lvfork: .long sys_vfork -.Lschedtail: .long schedule_tail -.Lsysc_table: .long sys_call_table + .long sys_rt_sigsuspend +.Lsigreturn: .long sys_sigreturn +.Lsigsuspend: .long sys_sigsuspend +.Lsigaltstack: .long sys_sigaltstack +.Ltrace: .long syscall_trace +.Lvfork: .long sys_vfork +.Lschedtail: .long schedule_tail +.Lsysc_table: .long sys_call_table #ifdef CONFIG_TRACE_IRQFLAGS -.Ltrace_irq_on:.long trace_hardirqs_on +.Ltrace_irq_on: .long trace_hardirqs_on .Ltrace_irq_off: - .long trace_hardirqs_off + .long trace_hardirqs_off #endif .Lcritical_start: - .long __critical_start + 0x80000000 + .long __critical_start + 0x80000000 .Lcritical_end: - .long __critical_end + 0x80000000 + .long __critical_end + 0x80000000 .Lcleanup_critical: - .long cleanup_critical + .long cleanup_critical - .section .rodata, "a" + .section .rodata, "a" #define SYSCALL(esa,esame,emu) .long esa sys_call_table: #include "syscalls.S" diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 29bbfbab733..0f758c329a5 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -4,8 +4,8 @@ * * Copyright (C) IBM Corp. 1999,2006 * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Hartmut Penner (hp@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Hartmut Penner (hp@de.ibm.com), + * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), * Heiko Carstens <heiko.carstens@de.ibm.com> */ @@ -24,29 +24,29 @@ * Stack layout for the system_call stack entry. * The first few entries are identical to the user_regs_struct. */ -SP_PTREGS = STACK_FRAME_OVERHEAD -SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS -SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW -SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS -SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 -SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 -SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 -SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 -SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 -SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 -SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 -SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64 -SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72 -SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80 -SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88 -SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96 -SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104 -SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 -SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 -SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 -SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP -SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE +SP_PTREGS = STACK_FRAME_OVERHEAD +SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS +SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW +SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS +SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 +SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 +SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 +SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 +SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 +SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 +SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 +SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64 +SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72 +SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80 +SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88 +SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96 +SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104 +SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 +SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 +SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 +SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC +SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT @@ -71,14 +71,14 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ #define TRACE_IRQS_OFF #endif - .macro STORE_TIMER lc_offset + .macro STORE_TIMER lc_offset #ifdef CONFIG_VIRT_CPU_ACCOUNTING stpt \lc_offset #endif .endm #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .macro UPDATE_VTIME lc_from,lc_to,lc_sum + .macro UPDATE_VTIME lc_from,lc_to,lc_sum lg %r10,\lc_from slg %r10,\lc_to alg %r10,\lc_sum @@ -94,7 +94,7 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ * R15 - kernel stack pointer */ - .macro SAVE_ALL_BASE savearea + .macro SAVE_ALL_BASE savearea stmg %r12,%r15,\savearea larl %r13,system_call .endm @@ -139,8 +139,8 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ .endm .macro CREATE_STACK_FRAME psworg,savearea - aghi %r15,-SP_SIZE # make room for registers & psw - mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack + aghi %r15,-SP_SIZE # make room for registers & psw + mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack la %r12,\psworg stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 icm %r12,12,__LC_SVC_ILC @@ -149,7 +149,7 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack la %r12,0 stg %r12,__SF_BACKCHAIN(%r15) - .endm + .endm .macro RESTORE_ALL psworg,sync mvc \psworg(16),SP_PSW(%r15) # move user PSW to lowcore @@ -168,29 +168,29 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ * Returns: * gpr2 = prev */ - .globl __switch_to + .globl __switch_to __switch_to: tm __THREAD_per+4(%r3),0xe8 # is the new process using per ? jz __switch_to_noper # if not we're fine - stctg %c9,%c11,__SF_EMPTY(%r15)# We are using per stuff - clc __THREAD_per(24,%r3),__SF_EMPTY(%r15) - je __switch_to_noper # we got away without bashing TLB's - lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't + stctg %c9,%c11,__SF_EMPTY(%r15)# We are using per stuff + clc __THREAD_per(24,%r3),__SF_EMPTY(%r15) + je __switch_to_noper # we got away without bashing TLB's + lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't __switch_to_noper: - lg %r4,__THREAD_info(%r2) # get thread_info of prev + lg %r4,__THREAD_info(%r2) # get thread_info of prev tm __TI_flags+7(%r4),_TIF_MCCK_PENDING # machine check pending? jz __switch_to_no_mcck ni __TI_flags+7(%r4),255-_TIF_MCCK_PENDING # clear flag in prev lg %r4,__THREAD_info(%r3) # get thread_info of next oi __TI_flags+7(%r4),_TIF_MCCK_PENDING # set it in next __switch_to_no_mcck: - stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task + stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task stg %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp lg %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp - lmg %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task + lmg %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task stg %r3,__LC_CURRENT # __LC_CURRENT = current task struct lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 - lg %r3,__THREAD_info(%r3) # load thread_info from task struct + lg %r3,__THREAD_info(%r3) # load thread_info from task struct stg %r3,__LC_THREAD_INFO aghi %r3,STACK_SIZE stg %r3,__LC_KERNEL_STACK # __LC_KERNEL_STACK = new kernel stack @@ -202,14 +202,14 @@ __critical_start: * are executed with interrupts enabled. */ - .globl system_call + .globl system_call system_call: STORE_TIMER __LC_SYNC_ENTER_TIMER sysc_saveall: SAVE_ALL_BASE __LC_SAVE_AREA SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA - llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA + llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore #ifdef CONFIG_VIRT_CPU_ACCOUNTING sysc_vtime: tm SP_PSW+1(%r15),0x01 # interrupting from user ? @@ -222,45 +222,45 @@ sysc_update: #endif sysc_do_svc: lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - slag %r7,%r7,2 # *4 and test for svc 0 + slag %r7,%r7,2 # *4 and test for svc 0 jnz sysc_nr_ok # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) jnl sysc_nr_ok - lgfr %r7,%r1 # clear high word in r1 - slag %r7,%r7,2 # svc 0: system call number in %r1 + lgfr %r7,%r1 # clear high word in r1 + slag %r7,%r7,2 # svc 0: system call number in %r1 sysc_nr_ok: mvc SP_ARGS(8,%r15),SP_R7(%r15) sysc_do_restart: - larl %r10,sys_call_table + larl %r10,sys_call_table #ifdef CONFIG_COMPAT tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ? jno sysc_noemu - larl %r10,sys_call_table_emu # use 31 bit emulation system calls + larl %r10,sys_call_table_emu # use 31 bit emulation system calls sysc_noemu: #endif tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) - lgf %r8,0(%r7,%r10) # load address of system call routine - jnz sysc_tracesys - basr %r14,%r8 # call sys_xxxx - stg %r2,SP_R2(%r15) # store return value (change R2 on stack) - # ATTENTION: check sys_execve_glue before - # changing anything here !! + lgf %r8,0(%r7,%r10) # load address of system call routine + jnz sysc_tracesys + basr %r14,%r8 # call sys_xxxx + stg %r2,SP_R2(%r15) # store return value (change R2 on stack) + # ATTENTION: check sys_execve_glue before + # changing anything here !! sysc_return: - tm SP_PSW+1(%r15),0x01 # returning to user ? - jno sysc_leave + tm SP_PSW+1(%r15),0x01 # returning to user ? + jno sysc_leave tm __TI_flags+7(%r9),_TIF_WORK_SVC - jnz sysc_work # there is work to do (signals etc.) + jnz sysc_work # there is work to do (signals etc.) sysc_leave: - RESTORE_ALL __LC_RETURN_PSW,1 + RESTORE_ALL __LC_RETURN_PSW,1 # # recheck if there is more work to do # sysc_work_loop: tm __TI_flags+7(%r9),_TIF_WORK_SVC - jz sysc_leave # there is no work to do + jz sysc_leave # there is no work to do # # One of the work bits is on. Find out which one. # @@ -279,25 +279,25 @@ sysc_work: # # _TIF_NEED_RESCHED is set, call schedule -# -sysc_reschedule: - larl %r14,sysc_work_loop - jg schedule # return point is sysc_return +# +sysc_reschedule: + larl %r14,sysc_work_loop + jg schedule # return point is sysc_return # # _TIF_MCCK_PENDING is set, call handler # sysc_mcck_pending: larl %r14,sysc_work_loop - jg s390_handle_mcck # TIF bit will be cleared by handler + jg s390_handle_mcck # TIF bit will be cleared by handler # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -sysc_sigpending: +sysc_sigpending: ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - la %r2,SP_PTREGS(%r15) # load pt_regs - brasl %r14,do_signal # call do_signal + la %r2,SP_PTREGS(%r15) # load pt_regs + brasl %r14,do_signal # call do_signal tm __TI_flags+7(%r9),_TIF_RESTART_SVC jo sysc_restart tm __TI_flags+7(%r9),_TIF_SINGLE_STEP @@ -309,11 +309,11 @@ sysc_sigpending: # sysc_restart: ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC - lg %r7,SP_R2(%r15) # load new svc number - slag %r7,%r7,2 # *4 + lg %r7,SP_R2(%r15) # load new svc number + slag %r7,%r7,2 # *4 mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument - lmg %r2,%r6,SP_R2(%r15) # load svc arguments - j sysc_do_restart # restart svc + lmg %r2,%r6,SP_R2(%r15) # load svc arguments + j sysc_do_restart # restart svc # # _TIF_SINGLE_STEP is set, call do_single_step @@ -326,49 +326,48 @@ sysc_singlestep: larl %r14,sysc_return # load adr. of system return jg do_single_step # branch to do_sigtrap - # # call syscall_trace before and after system call # special linkage: %r12 contains the return address for trace_svc # sysc_tracesys: - la %r2,SP_PTREGS(%r15) # load pt_regs + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,0 srl %r7,2 - stg %r7,SP_R2(%r15) - brasl %r14,syscall_trace + stg %r7,SP_R2(%r15) + brasl %r14,syscall_trace lghi %r0,NR_syscalls clg %r0,SP_R2(%r15) jnh sysc_tracenogo - lg %r7,SP_R2(%r15) # strace might have changed the - sll %r7,2 # system call + lg %r7,SP_R2(%r15) # strace might have changed the + sll %r7,2 # system call lgf %r8,0(%r7,%r10) sysc_tracego: - lmg %r3,%r6,SP_R3(%r15) - lg %r2,SP_ORIG_R2(%r15) - basr %r14,%r8 # call sys_xxx - stg %r2,SP_R2(%r15) # store return value + lmg %r3,%r6,SP_R3(%r15) + lg %r2,SP_ORIG_R2(%r15) + basr %r14,%r8 # call sys_xxx + stg %r2,SP_R2(%r15) # store return value sysc_tracenogo: tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) - jz sysc_return - la %r2,SP_PTREGS(%r15) # load pt_regs + jz sysc_return + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,1 - larl %r14,sysc_return # return point is sysc_return + larl %r14,sysc_return # return point is sysc_return jg syscall_trace # # a new process exits the kernel with ret_from_fork # - .globl ret_from_fork + .globl ret_from_fork ret_from_fork: lg %r13,__LC_SVC_NEW_PSW+8 lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct tm SP_PSW+1(%r15),0x01 # forking a kernel thread ? jo 0f stg %r15,SP_R15(%r15) # store stack pointer for new kthread -0: brasl %r14,schedule_tail +0: brasl %r14,schedule_tail TRACE_IRQS_ON - stosm 24(%r15),0x03 # reenable interrupts + stosm 24(%r15),0x03 # reenable interrupts j sysc_return # @@ -377,78 +376,78 @@ ret_from_fork: # but are called with different parameter. # return-address is set up above # -sys_clone_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys_clone # branch to sys_clone +sys_clone_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys_clone # branch to sys_clone #ifdef CONFIG_COMPAT -sys32_clone_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys32_clone # branch to sys32_clone +sys32_clone_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys32_clone # branch to sys32_clone #endif -sys_fork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys_fork # branch to sys_fork - -sys_vfork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys_vfork # branch to sys_vfork - -sys_execve_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - lgr %r12,%r14 # save return address - brasl %r14,sys_execve # call sys_execve - ltgr %r2,%r2 # check if execve failed - bnz 0(%r12) # it did fail -> store result in gpr2 - b 6(%r12) # SKIP STG 2,SP_R2(15) in - # system_call/sysc_tracesys +sys_fork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys_fork # branch to sys_fork + +sys_vfork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys_vfork # branch to sys_vfork + +sys_execve_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + lgr %r12,%r14 # save return address + brasl %r14,sys_execve # call sys_execve + ltgr %r2,%r2 # check if execve failed + bnz 0(%r12) # it did fail -> store result in gpr2 + b 6(%r12) # SKIP STG 2,SP_R2(15) in + # system_call/sysc_tracesys #ifdef CONFIG_COMPAT -sys32_execve_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - lgr %r12,%r14 # save return address - brasl %r14,sys32_execve # call sys32_execve - ltgr %r2,%r2 # check if execve failed - bnz 0(%r12) # it did fail -> store result in gpr2 - b 6(%r12) # SKIP STG 2,SP_R2(15) in - # system_call/sysc_tracesys +sys32_execve_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + lgr %r12,%r14 # save return address + brasl %r14,sys32_execve # call sys32_execve + ltgr %r2,%r2 # check if execve failed + bnz 0(%r12) # it did fail -> store result in gpr2 + b 6(%r12) # SKIP STG 2,SP_R2(15) in + # system_call/sysc_tracesys #endif -sys_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys_sigreturn # branch to sys_sigreturn +sys_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys_sigreturn # branch to sys_sigreturn #ifdef CONFIG_COMPAT -sys32_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys32_sigreturn # branch to sys32_sigreturn +sys32_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys32_sigreturn # branch to sys32_sigreturn #endif -sys_rt_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys_rt_sigreturn # branch to sys_sigreturn +sys_rt_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys_rt_sigreturn # branch to sys_sigreturn #ifdef CONFIG_COMPAT -sys32_rt_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys32_rt_sigreturn # branch to sys32_sigreturn +sys32_rt_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys32_rt_sigreturn # branch to sys32_sigreturn #endif sys_sigaltstack_glue: - la %r4,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys_sigaltstack # branch to sys_sigreturn + la %r4,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys_sigaltstack # branch to sys_sigreturn #ifdef CONFIG_COMPAT sys32_sigaltstack_glue: - la %r4,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys32_sigaltstack_wrapper # branch to sys_sigreturn + la %r4,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys32_sigaltstack_wrapper # branch to sys_sigreturn #endif /* * Program check handler routine */ - .globl pgm_check_handler + .globl pgm_check_handler pgm_check_handler: /* * First we need to check for a special case: @@ -465,8 +464,8 @@ pgm_check_handler: */ STORE_TIMER __LC_SYNC_ENTER_TIMER SAVE_ALL_BASE __LC_SAVE_AREA - tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception - jnz pgm_per # got per exception -> special case + tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception + jnz pgm_per # got per exception -> special case SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -478,29 +477,29 @@ pgm_check_handler: pgm_no_vtime: #endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - lgf %r3,__LC_PGM_ILC # load program interruption code + lgf %r3,__LC_PGM_ILC # load program interruption code lghi %r8,0x7f ngr %r8,%r3 pgm_do_call: - sll %r8,3 - larl %r1,pgm_check_table - lg %r1,0(%r8,%r1) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area + sll %r8,3 + larl %r1,pgm_check_table + lg %r1,0(%r8,%r1) # load address of handler routine + la %r2,SP_PTREGS(%r15) # address of register-save area larl %r14,sysc_return - br %r1 # branch to interrupt-handler + br %r1 # branch to interrupt-handler # # handle per exception # pgm_per: - tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on - jnz pgm_per_std # ok, normal per event from user space + tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on + jnz pgm_per_std # ok, normal per event from user space # ok its one of the special cases, now we need to find out which one - clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW - je pgm_svcper + clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW + je pgm_svcper # no interesting special case, ignore PER event lmg %r12,%r15,__LC_SAVE_AREA - lpswe __LC_PGM_OLD_PSW + lpswe __LC_PGM_OLD_PSW # # Normal per exception @@ -524,9 +523,9 @@ pgm_no_vtime2: mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP - lgf %r3,__LC_PGM_ILC # load program interruption code + lgf %r3,__LC_PGM_ILC # load program interruption code lghi %r8,0x7f - ngr %r8,%r3 # clear per-event-bit and ilc + ngr %r8,%r3 # clear per-event-bit and ilc je sysc_return j pgm_do_call @@ -544,7 +543,7 @@ pgm_svcper: mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER pgm_no_vtime3: #endif - llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore + llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct lg %r1,__TI_task(%r9) mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID @@ -568,7 +567,7 @@ kernel_per: /* * IO interrupt handler routine */ - .globl io_int_handler + .globl io_int_handler io_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -585,42 +584,42 @@ io_no_vtime: #endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - brasl %r14,do_IRQ # call standard irq handler + la %r2,SP_PTREGS(%r15) # address of register-save area + brasl %r14,do_IRQ # call standard irq handler TRACE_IRQS_ON io_return: - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm SP_PSW+1(%r15),0x01 # returning to user ? #ifdef CONFIG_PREEMPT - jno io_preempt # no -> check for preemptive scheduling + jno io_preempt # no -> check for preemptive scheduling #else - jno io_leave # no-> skip resched & signal + jno io_leave # no-> skip resched & signal #endif tm __TI_flags+7(%r9),_TIF_WORK_INT - jnz io_work # there is work to do (signals etc.) + jnz io_work # there is work to do (signals etc.) io_leave: - RESTORE_ALL __LC_RETURN_PSW,0 + RESTORE_ALL __LC_RETURN_PSW,0 io_done: #ifdef CONFIG_PREEMPT io_preempt: - icm %r0,15,__TI_precount(%r9) - jnz io_leave + icm %r0,15,__TI_precount(%r9) + jnz io_leave # switch to kernel stack lg %r1,SP_R15(%r15) aghi %r1,-SP_SIZE mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain lgr %r15,%r1 io_resume_loop: tm __TI_flags+7(%r9),_TIF_NEED_RESCHED jno io_leave - larl %r1,.Lc_pactive - mvc __TI_precount(4,%r9),0(%r1) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - brasl %r14,schedule # call schedule - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - xc __TI_precount(4,%r9),__TI_precount(%r9) + larl %r1,.Lc_pactive + mvc __TI_precount(4,%r9),0(%r1) + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + brasl %r14,schedule # call schedule + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + xc __TI_precount(4,%r9),__TI_precount(%r9) j io_resume_loop #endif @@ -631,7 +630,7 @@ io_work: lg %r1,__LC_KERNEL_STACK aghi %r1,-SP_SIZE mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain lgr %r15,%r1 # # One of the work bits is on. Find out which one. @@ -656,11 +655,11 @@ io_mcck_pending: # # _TIF_NEED_RESCHED is set, call schedule -# -io_reschedule: - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - brasl %r14,schedule # call scheduler - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts +# +io_reschedule: + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + brasl %r14,schedule # call scheduler + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts tm __TI_flags+7(%r9),_TIF_WORK_INT jz io_leave # there is no work to do j io_work_loop @@ -668,17 +667,17 @@ io_reschedule: # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -io_sigpending: - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs +io_sigpending: + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + la %r2,SP_PTREGS(%r15) # load pt_regs brasl %r14,do_signal # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts j io_work_loop /* * External interrupt handler routine */ - .globl ext_int_handler + .globl ext_int_handler ext_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -695,9 +694,9 @@ ext_no_vtime: #endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - llgh %r3,__LC_EXT_INT_CODE # get interruption code - brasl %r14,do_extint + la %r2,SP_PTREGS(%r15) # address of register-save area + llgh %r3,__LC_EXT_INT_CODE # get interruption code + brasl %r14,do_extint TRACE_IRQS_ON j io_return @@ -706,14 +705,14 @@ __critical_end: /* * Machine check handler routines */ - .globl mcck_int_handler + .globl mcck_int_handler mcck_int_handler: la %r1,4095 # revalidate r1 spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer - lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs + lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+64 la %r12,__LC_MCK_OLD_PSW - tm __LC_MCCK_CODE,0x80 # system damage? + tm __LC_MCCK_CODE,0x80 # system damage? jo mcck_int_main # yes -> rest of mcck code invalid #ifdef CONFIG_VIRT_CPU_ACCOUNTING la %r14,4095 @@ -737,19 +736,19 @@ mcck_int_handler: #endif tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? jno mcck_int_main # no -> skip cleanup critical - tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit + tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit jnz mcck_int_main # from user -> load kernel stack clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_end) jhe mcck_int_main - clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start) + clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start) jl mcck_int_main - brasl %r14,cleanup_critical + brasl %r14,cleanup_critical mcck_int_main: - lg %r14,__LC_PANIC_STACK # are we already on the panic stack? + lg %r14,__LC_PANIC_STACK # are we already on the panic stack? slgr %r14,%r15 srag %r14,%r14,PAGE_SHIFT jz 0f - lg %r15,__LC_PANIC_STACK # load panic stack + lg %r15,__LC_PANIC_STACK # load panic stack 0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64 #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? @@ -764,7 +763,7 @@ mcck_no_vtime: lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct la %r2,SP_PTREGS(%r15) # load pt_regs brasl %r14,s390_do_machine_check - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm SP_PSW+1(%r15),0x01 # returning to user ? jno mcck_return lg %r1,__LC_KERNEL_STACK # switch to kernel stack aghi %r1,-SP_SIZE @@ -794,28 +793,28 @@ mcck_return: /* * Restart interruption handler, kick starter for additional CPUs */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - lg %r15,__LC_SAVE_AREA+120 # load ksp - lghi %r10,__LC_CREGS_SAVE_AREA - lctlg %c0,%c15,0(%r10) # get new ctl regs - lghi %r10,__LC_AREGS_SAVE_AREA - lam %a0,%a15,0(%r10) - lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone - stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on - jg start_secondary + lg %r15,__LC_SAVE_AREA+120 # load ksp + lghi %r10,__LC_CREGS_SAVE_AREA + lctlg %c0,%c15,0(%r10) # get new ctl regs + lghi %r10,__LC_AREGS_SAVE_AREA + lam %a0,%a15,0(%r10) + lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone + stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on + jg start_secondary #else /* * If we do not run with SMP enabled, let the new CPU crash ... */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - basr %r1,0 + basr %r1,0 restart_base: - lpswe restart_crash-restart_base(%r1) - .align 8 + lpswe restart_crash-restart_base(%r1) + .align 8 restart_crash: - .long 0x000a0000,0x00000000,0x00000000,0x00000000 + .long 0x000a0000,0x00000000,0x00000000,0x00000000 restart_go: #endif @@ -836,9 +835,9 @@ stack_overflow: chi %r12,__LC_PGM_OLD_PSW je 0f la %r1,__LC_SAVE_AREA+32 -0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack - xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain - la %r2,SP_PTREGS(%r15) # load pt_regs +0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain + la %r2,SP_PTREGS(%r15) # load pt_regs jg kernel_stack_overflow #endif @@ -941,10 +940,10 @@ cleanup_novtime: cleanup_system_call_insn: .quad sysc_saveall #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .quad system_call - .quad sysc_vtime - .quad sysc_stime - .quad sysc_update + .quad system_call + .quad sysc_vtime + .quad sysc_stime + .quad sysc_update #endif cleanup_sysc_return: @@ -1010,21 +1009,21 @@ cleanup_io_leave_insn: /* * Integer constants */ - .align 4 + .align 4 .Lconst: -.Lc_pactive: .long PREEMPT_ACTIVE -.Lnr_syscalls: .long NR_syscalls -.L0x0130: .short 0x130 -.L0x0140: .short 0x140 -.L0x0150: .short 0x150 -.L0x0160: .short 0x160 -.L0x0170: .short 0x170 +.Lc_pactive: .long PREEMPT_ACTIVE +.Lnr_syscalls: .long NR_syscalls +.L0x0130: .short 0x130 +.L0x0140: .short 0x140 +.L0x0150: .short 0x150 +.L0x0160: .short 0x160 +.L0x0170: .short 0x170 .Lcritical_start: - .quad __critical_start + .quad __critical_start .Lcritical_end: - .quad __critical_end + .quad __critical_end - .section .rodata, "a" + .section .rodata, "a" #define SYSCALL(esa,esame,emu) .long esame sys_call_table: #include "syscalls.S" diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 0f1db268a8a..0cf59bb7a85 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -36,449 +36,449 @@ #endif #ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW + .org 0 + .long 0x00080000,0x80000000+startup # Just a restart PSW #else #ifdef CONFIG_IPL_TAPE #define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw + .org 0 + .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded + .long 0x27000000,0x60000001 # by ipl to addresses 0-23. + .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). + .long 0x00000000,0x00000000 # external old psw + .long 0x00000000,0x00000000 # svc old psw + .long 0x00000000,0x00000000 # program check old psw + .long 0x00000000,0x00000000 # machine check old psw + .long 0x00000000,0x00000000 # io old psw + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x000a0000,0x00000058 # external new psw + .long 0x000a0000,0x00000060 # svc new psw + .long 0x000a0000,0x00000068 # program check new psw + .long 0x000a0000,0x00000070 # machine check new psw + .long 0x00080000,0x80000000+.Lioint # io new psw - .org 0x100 + .org 0x100 # # subroutine for loading from tape -# Paramters: +# Paramters: # R1 = device number # R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 +.Lloader: + st %r14,.Lldret + la %r3,.Lorbread # r3 = address of orb + la %r5,.Lirb # r5 = address of irb + st %r2,.Lccwread+4 # initialize CCW data addresses + lctl %c6,%c6,.Lcr6 + slr %r2,%r2 .Lldlp: - la %r6,3 # 3 retries + la %r6,3 # 3 retries .Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr + ssch 0(%r3) # load chunk of IPL_BS bytes + bnz .Llderr .Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp + bas %r14,.Lwait4io + tm 8(%r5),0x82 # do we have a problem ? + bnz .Lrecov + slr %r7,%r7 + icm %r7,3,10(%r5) # get residual count + lcr %r7,%r7 + la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read + ar %r2,%r7 # add to total size + tm 8(%r5),0x01 # found a tape mark ? + bnz .Ldone + l %r0,.Lccwread+4 # update CCW data addresses + ar %r0,%r7 + st %r0,.Lccwread+4 + b .Lldlp .Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size + l %r14,.Lldret + br %r14 # r2 contains the total size .Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr + bas %r14,.Lsense # do the sensing + bct %r6,.Lssch # dec. retry count & branch + b .Llderr # # Sense subroutine # .Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 + st %r14,.Lsnsret + la %r7,.Lorbsense + ssch 0(%r7) # start sense command + bnz .Llderr + bas %r14,.Lwait4io + l %r14,.Lsnsret + tm 8(%r5),0x82 # do we have a problem ? + bnz .Llderr + br %r14 # # Wait for interrupt subroutine # .Lwait4io: - lpsw .Lwaitpsw + lpsw .Lwaitpsw .Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io + c %r1,0xb8 # compare subchannel number + bne .Lwait4io + tsch 0(%r5) + slr %r0,%r0 + tm 8(%r5),0x82 # do we have a problem ? + bnz .Lwtexit + tm 8(%r5),0x04 # got device end ? + bz .Lwait4io .Lwtexit: - br %r14 + br %r14 .Llderr: - lpsw .Lcrash + lpsw .Lcrash - .align 8 + .align 8 .Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 + .long 0x00000000,0x0080ff00,.Lccwread + .align 8 .Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 + .long 0x00000000,0x0080ff00,.Lccwsense + .align 8 .Lccwread: - .long 0x02200000+IPL_BS,0x00000000 + .long 0x02200000+IPL_BS,0x00000000 .Lccwsense: - .long 0x04200001,0x00000000 + .long 0x04200001,0x00000000 .Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint + .long 0x020a0000,0x80000000+.Lioint -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 +.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 +.Lcr6: .long 0xff000000 + .align 8 +.Lcrash:.long 0x000a0000,0x00000000 +.Lldret:.long 0 .Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ +#endif /* CONFIG_IPL_TAPE */ #ifdef CONFIG_IPL_VM -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0xf0 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 +#define IPL_BS 0x730 + .org 0 + .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded + .long 0x02000018,0x60000050 # by ipl to addresses 0-23. + .long 0x02000068,0x60000050 # (a PSW and two CCWs). + .fill 80-24,1,0x40 # bytes 24-79 are discarded !! + .long 0x020000f0,0x60000050 # The next 160 byte are loaded + .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 + .long 0x02000190,0x60000050 # They form the continuation + .long 0x020001e0,0x60000050 # of the CCW program started + .long 0x02000230,0x60000050 # by ipl and load the range + .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image + .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 + .long 0x02000320,0x60000050 # in memory. At the end of + .long 0x02000370,0x60000050 # the channel program the PSW + .long 0x020003c0,0x60000050 # at location 0 is loaded. + .long 0x02000410,0x60000050 # Initial processing starts + .long 0x02000460,0x60000050 # at 0xf0 = iplstart. + .long 0x020004b0,0x60000050 + .long 0x02000500,0x60000050 + .long 0x02000550,0x60000050 + .long 0x020005a0,0x60000050 + .long 0x020005f0,0x60000050 + .long 0x02000640,0x60000050 + .long 0x02000690,0x60000050 + .long 0x020006e0,0x20000050 - .org 0xf0 + .org 0xf0 # # subroutine for loading cards from the reader # -.Lloader: - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 +.Lloader: + la %r3,.Lorb # r2 = address of orb into r2 + la %r5,.Lirb # r4 = address of irb + la %r6,.Lccws + la %r7,20 .Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit + st %r2,4(%r6) # initialize CCW data addresses + la %r2,0x50(%r2) + la %r6,8(%r6) + bct 7,.Linit - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 + lctl %c6,%c6,.Lcr6 # set IO subclass mask + slr %r2,%r2 .Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr + ssch 0(%r3) # load chunk of 1600 bytes + bnz .Llderr .Lwait4irq: - mvc 0x78(8),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw + lpsw .Lwaitpsw .Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) + c %r1,0xb8 # compare subchannel number + bne .Lwait4irq + tsch 0(%r5) - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont + slr %r0,%r0 + ic %r0,8(%r5) # get device status + chi %r0,8 # channel end ? + be .Lcont + chi %r0,12 # channel end + device end ? + be .Lcont - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r14 # r2 contains the total size + l %r0,4(%r5) + s %r0,8(%r3) # r0/8 = number of ccws executed + mhi %r0,10 # *10 = number of bytes in ccws + lh %r3,10(%r5) # get residual count + sr %r0,%r3 # #ccws*80-residual=#bytes read + ar %r2,%r0 + + br %r14 # r2 contains the total size .Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 + ahi %r2,0x640 # add 0x640 to total size + la %r6,.Lccws + la %r7,20 .Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr + l %r0,4(%r6) # update CCW data addresses + ahi %r0,0x640 + st %r0,4(%r6) + ahi %r6,8 + bct 7,.Lincr - b .Lldlp + b .Lldlp .Llderr: - lpsw .Lcrash + lpsw .Lcrash - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 + .align 8 +.Lorb: .long 0x00000000,0x0080ff00,.Lccws +.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 +.Lcr6: .long 0xff000000 +.Lloadp:.long 0,0 + .align 8 +.Lcrash:.long 0x000a0000,0x00000000 .Lnewpsw: - .long 0x00080000,0x80000000+.Lioint + .long 0x00080000,0x80000000+.Lioint .Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint + .long 0x020a0000,0x80000000+.Lioint - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ + .align 8 +.Lccws: .rept 19 + .long 0x02600050,0x00000000 + .endr + .long 0x02200050,0x00000000 +#endif /* CONFIG_IPL_VM */ iplstart: - lh %r1,0xb8 # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,0xb8 # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number + lh %r1,0xb8 # test if subchannel number + bct %r1,.Lnoload # is valid + l %r1,0xb8 # load ipl subchannel number + la %r2,IPL_BS # load start address + bas %r14,.Lloader # load rest of ipl image + l %r12,.Lparm # pointer to parameter area + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,.Linitrd # ramdisk loc. is temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 + l %r2,.Linitrd # ramdisk loc. is temp + bas %r14,.Lloader # load parameter file + ltr %r2,%r2 # got anything ? + bz .Lnopf + chi %r2,895 + bnh .Lnotrunc + la %r2,895 .Lnotrunc: - l %r4,.Linitrd - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 + l %r4,.Linitrd + clc 0(3,%r4),.L_hdr # if it is HDRx + bz .Lagain1 # skip dataset header + clc 0(3,%r4),.L_eof # if it is EOFx + bz .Lagain1 # skip dateset trailer + la %r5,0(%r4,%r2) + lr %r3,%r2 .Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv + tm 0(%r5),0x80 # high order bit set ? + bo .Ldocv # yes -> convert from EBCDIC + ahi %r5,-1 + bct %r3,.Lidebc + b .Lnocv .Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp + l %r3,.Lcvtab + tr 0(256,%r4),0(%r3) # convert parameters to ascii + tr 256(256,%r4),0(%r3) + tr 512(256,%r4),0(%r3) + tr 768(122,%r4),0(%r3) +.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line + mvc 0(256,%r3),0(%r4) + mvc 256(256,%r3),256(%r4) + mvc 512(256,%r3),512(%r4) + mvc 768(122,%r3),768(%r4) + slr %r0,%r0 + b .Lcntlp .Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp + ic %r0,0(%r2,%r3) + chi %r0,0x20 # is it a space ? + be .Lcntlp + ahi %r2,1 + b .Leolp .Lcntlp: - brct %r2,.Ldelspc + brct %r2,.Ldelspc .Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer + slr %r0,%r0 + stc %r0,0(%r2,%r3) # terminate buffer .Lnopf: # # load ramdisk from ipl device -# +# .Lagain2: - l %r2,.Linitrd # addr of ramdisk - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found + l %r2,.Linitrd # addr of ramdisk + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) + bas %r14,.Lloader # load ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd + ltr %r2,%r2 + bnz .Lrdcont + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,.Linitrd + l %r2,.Linitrd - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 + clc 0(3,%r2),.L_hdr # skip HDRx and EOFx + bz .Lagain2 + clc 0(3,%r2),.L_eof + bz .Lagain2 #ifdef CONFIG_IPL_VM # # reset files in VM reader # - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running VM ? + bno .Lnoreset + la %r2,.Lreset + lhi %r3,26 + diag %r2,%r3,8 + la %r5,.Lirb + stsch 0(%r5) # check if irq is pending + tm 30(%r5),0x0f # by verifying if any of the + bnz .Lwaitforirq # activity or status control + tm 31(%r5),0xff # bits is set in the schib + bz .Lnoreset .Lwaitforirq: - mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw .Lwaitrdrirq: - lpsw .Lrdrwaitpsw + lpsw .Lrdrwaitpsw .Lrdrint: - c %r1,0xb8 # compare subchannel number - bne .Lwaitrdrirq - la %r5,.Lirb - tsch 0(%r5) + c %r1,0xb8 # compare subchannel number + bne .Lwaitrdrirq + la %r5,.Lirb + tsch 0(%r5) .Lnoreset: - b .Lnoload + b .Lnoload - .align 8 + .align 8 .Lrdrnewpsw: - .long 0x00080000,0x80000000+.Lrdrint + .long 0x00080000,0x80000000+.Lrdrint .Lrdrwaitpsw: - .long 0x020a0000,0x80000000+.Lrdrint + .long 0x020a0000,0x80000000+.Lrdrint #endif # # everything loaded, go for it # .Lnoload: - l %r1,.Lstartup - br %r1 + l %r1,.Lstartup + br %r1 -.Linitrd:.long _end + 0x400000 # default address of initrd +.Linitrd:.long _end + 0x400000 # default address of initrd .Lparm: .long PARMAREA .Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ +.Lcvtab:.long _ebcasc # ebcdic to ascii table +.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 + .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 + .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" +.L_eof: .long 0xc5d6c600 /* C'EOF' */ +.L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ +#endif /* CONFIG_IPL */ # # SALIPL loader support. Based on a patch by Rob van der Heij. # This entry point is called directly from the SALIPL loader and # doesn't need a builtin ipl record. # - .org 0x800 - .globl start + .org 0x800 + .globl start start: - stm %r0,%r15,0x07b0 # store registers - basr %r12,%r0 + stm %r0,%r15,0x07b0 # store registers + basr %r12,%r0 .base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer + l %r11,.parm + l %r8,.cmd # pointer to command buffer - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 + ltr %r9,%r9 # do we have SALIPL parameters? + bp .sk8x8 - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr + mvc 0(64,%r8),0x00b0 # copy saved registers + xc 64(240-64,%r8),0(%r8) # remainder of buffer + tr 0(64,%r8),.lowcase + b .gotr .sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer + mvc 0(240,%r8),0(%r9) # copy iplparms into buffer .gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) - stidp __LC_CPUID # Are we running on VM maybe - cli __LC_CPUID,0xff - bnz .test - .long 0x83300060 # diag 3,0,x'0060' - storage size - b .done + l %r10,.tbl # EBCDIC to ASCII table + tr 0(240,%r8),0(%r10) + stidp __LC_CPUID # Are we running on VM maybe + cli __LC_CPUID,0xff + bnz .test + .long 0x83300060 # diag 3,0,x'0060' - storage size + b .done .test: - mvc 0x68(8),.pgmnw # set up pgm check handler - l %r2,.fourmeg - lr %r3,%r2 - bctr %r3,%r0 # 4M-1 -.loop: iske %r0,%r3 - ar %r3,%r2 + mvc 0x68(8),.pgmnw # set up pgm check handler + l %r2,.fourmeg + lr %r3,%r2 + bctr %r3,%r0 # 4M-1 +.loop: iske %r0,%r3 + ar %r3,%r2 .pgmx: - sr %r3,%r2 - la %r3,1(%r3) + sr %r3,%r2 + la %r3,1(%r3) .done: - l %r1,.memsize - st %r3,ARCH_OFFSET(%r1) - slr %r0,%r0 - st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) - st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) - j startup # continue with startup -.tbl: .long _ebcasc # translate table -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA + l %r1,.memsize + st %r3,ARCH_OFFSET(%r1) + slr %r0,%r0 + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) + j startup # continue with startup +.tbl: .long _ebcasc # translate table +.cmd: .long COMMAND_LINE # address of command line buffer +.parm: .long PARMAREA .memsize: .long memory_size .fourmeg: .long 0x00400000 # 4M -.pgmnw: .long 0x00080000,.pgmx +.pgmnw: .long 0x00080000,.pgmx .lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 + .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 + .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 + .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 + .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 + .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 + .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 + .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 + .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 + .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 + .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 + .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 + .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg + .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop + .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 + .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff #ifdef CONFIG_64BIT diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index a8bdd96494c..48998d50b00 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -15,232 +15,232 @@ # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # - .org 0x10000 -startup:basr %r13,0 # get base -.LPG0: l %r13,0f-.LPG0(%r13) - b 0(%r13) -0: .long startup_continue + .org 0x10000 +startup:basr %r13,0 # get base +.LPG0: l %r13,0f-.LPG0(%r13) + b 0(%r13) +0: .long startup_continue # # params at 10400 (setup.h) # - .org PARMAREA - .quad 0 # IPL_DEVICE - .quad 0 # INITRD_START - .quad 0 # INITRD_SIZE + .org PARMAREA + .quad 0 # IPL_DEVICE + .quad 0 # INITRD_START + .quad 0 # INITRD_SIZE - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 - .org 0x11000 + .org 0x11000 startup_continue: - basr %r13,0 # get base -.LPG1: sll %r13,1 # remove high order bit - srl %r13,1 - lhi %r1,1 # mode 1 = esame - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esame mode - sam64 # switch to 64 bit mode - lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) + basr %r13,0 # get base +.LPG1: sll %r13,1 # remove high order bit + srl %r13,1 + lhi %r1,1 # mode 1 = esame + mvi __LC_AR_MODE_ID,1 # set esame flag + slr %r0,%r0 # set cpuid to zero + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit mode + lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) # # Setup stack # - larl %r15,init_thread_union - lg %r14,__TI_task(%r15) # cache current in lowcore - stg %r14,__LC_CURRENT - aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - stg %r15,__LC_KERNEL_STACK # set end of kernel stack - aghi %r15,-160 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + larl %r15,init_thread_union + lg %r14,__TI_task(%r15) # cache current in lowcore + stg %r14,__LC_CURRENT + aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE + stg %r15,__LC_KERNEL_STACK # set end of kernel stack + aghi %r15,-160 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - brasl %r14,ipl_save_parameters + brasl %r14,ipl_save_parameters # # clear bss memory # - larl %r2,__bss_start # start of bss segment - larl %r3,_end # end of bss segment - sgr %r3,%r2 # length of bss - sgr %r4,%r4 # - sgr %r5,%r5 # set src,length and pad to zero - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish + larl %r2,__bss_start # start of bss segment + larl %r3,_end # end of bss segment + sgr %r3,%r2 # length of bss + sgr %r4,%r4 # + sgr %r5,%r5 # set src,length and pad to zero + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word .Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - stg %r1,.Lcr-.LPG1(%r13) - lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 + stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + stg %r1,.Lcr-.LPG1(%r13) + lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 - mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw - larl %r1,.Lsclph - stg %r1,__LC_EXT_NEW_PSW+8 # set handler + mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw + larl %r1,.Lsclph + stg %r1,__LC_EXT_NEW_PSW+8 # set handler - larl %r4,.Lsccb # %r4 is our index for sccb stuff - lgr %r1,%r4 # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3,%r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpswe .Lwaitsclp-.LPG1(%r13) + larl %r4,.Lsccb # %r4 is our index for sccb stuff + lgr %r1,%r4 # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3,%r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: - lh %r1,.Lsccbr-.Lsccb(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) + lh %r1,.Lsccbr-.Lsccb(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) .Lprocsccb: - lghi %r1,0 - icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 - jnz .Lscnd - lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one + lghi %r1,0 + icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 + jnz .Lscnd + lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one .Lscnd: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-.Lsccb(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-.Lsccb(%r4) + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-.Lsccb(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-.Lsccb(%r4) .Lcompmem: - mlgr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mlgr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) + mlgr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mlgr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) - .align 4 + .align 4 .Lpmask: - .byte 0 - .align 8 + .byte 0 + .align 8 .Lcr: - .quad 0x00 # place holder for cr0 + .quad 0x00 # place holder for cr0 .Lwaitsclp: - .quad 0x0102000180000000,.Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: - .int 0x00120001 # Read SCP forced code + .int 0x00120001 # Read SCP forced code .Lrcp2: - .int 0x00020001 # Read SCP code + .int 0x00020001 # Read SCP code .Lonemb: - .int 0x100000 + .int 0x100000 .Lfchunk: - # set program check new psw mask - mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) + # set program check new psw mask + mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # # find memory chunks. # - lgr %r9,%r3 # end of mem - larl %r1,.Lchkmem # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - la %r1,1 # test in increments of 128KB - sllg %r1,%r1,17 - larl %r3,memory_chunk - slgr %r4,%r4 # set start of chunk to zero - slgr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10,MEMORY_CHUNKS # number of chunks + lgr %r9,%r3 # end of mem + larl %r1,.Lchkmem # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + la %r1,1 # test in increments of 128KB + sllg %r1,%r1,17 + larl %r3,memory_chunk + slgr %r4,%r4 # set start of chunk to zero + slgr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10,MEMORY_CHUNKS # number of chunks .Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - je .Lsame - j .Lchkmem + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + je .Lsame + j .Lchkmem .Lsame: - algr %r5,%r1 # add 128KB to end of chunk - # no need to check here, - brc 12,.Lloop # this is the same chunk -.Lchkmem: # > 16EB or tprot got a program check - clgr %r4,%r5 # chunk size > 0? - je .Lchkloop - stg %r4,0(%r3) # store start address of chunk - lgr %r0,%r5 - slgr %r0,%r4 - stg %r0,8(%r3) # store size of chunk - st %r6,20(%r3) # store type of chunk - la %r3,24(%r3) - larl %r8,memory_size - stg %r5,0(%r8) # store memory size - ahi %r10,-1 # update chunk number + algr %r5,%r1 # add 128KB to end of chunk + # no need to check here, + brc 12,.Lloop # this is the same chunk +.Lchkmem: # > 16EB or tprot got a program check + clgr %r4,%r5 # chunk size > 0? + je .Lchkloop + stg %r4,0(%r3) # store start address of chunk + lgr %r0,%r5 + slgr %r0,%r4 + stg %r0,8(%r3) # store size of chunk + st %r6,20(%r3) # store type of chunk + la %r3,24(%r3) + larl %r8,memory_size + stg %r5,0(%r8) # store memory size + ahi %r10,-1 # update chunk number .Lchkloop: - lr %r6,%r7 # set access code to last cc + lr %r6,%r7 # set access code to last cc # we got an exception or we're starting a new # chunk , we must check if we should # still try to find valid memory (if we detected # the amount of available storage), and if we # have chunks left - lghi %r4,1 - sllg %r4,%r4,31 - clgr %r5,%r4 - je .Lhsaskip - xr %r0, %r0 - clgr %r0, %r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10, 0 # do we have chunks left? - je .Ldonemem + lghi %r4,1 + sllg %r4,%r4,31 + clgr %r5,%r4 + je .Lhsaskip + xr %r0, %r0 + clgr %r0, %r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10, 0 # do we have chunks left? + je .Ldonemem .Lhsaskip: - algr %r5,%r1 # add 128KB to end of chunk - lgr %r4,%r5 # potential new chunk - clgr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: + algr %r5,%r1 # add 128KB to end of chunk + lgr %r4,%r5 # potential new chunk + clgr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: - larl %r12,machine_flags + larl %r12,machine_flags # # find out if we are running under VM # - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno 0f-.LPG1(%r13) - oi 7(%r12),1 # set VM flag -0: lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne 1f-.LPG1(%r13) - oi 7(%r12),4 # set P/390 flag + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno 0f-.LPG1(%r13) + oi 7(%r12),1 # set VM flag +0: lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne 1f-.LPG1(%r13) + oi 7(%r12),4 # set P/390 flag 1: # # find out if we have the MVPG instruction # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - sgr %r0,%r0 - lghi %r1,0 - lghi %r2,0 - mvpg %r1,%r2 # test MVPG instruction - oi 7(%r12),16 # set MVPG flag + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + sgr %r0,%r0 + lghi %r1,0 + lghi %r2,0 + mvpg %r1,%r2 # test MVPG instruction + oi 7(%r12),16 # set MVPG flag 0: # # find out if the diag 0x44 works in 64 bit mode # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - diag 0,0,0x44 # test diag 0x44 - oi 7(%r12),32 # set diag44 flag -0: + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + diag 0,0,0x44 # test diag 0x44 + oi 7(%r12),32 # set diag44 flag +0: # # find out if we have the IDTE instruction # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 .long 0xb2b10000 # store facility list tm 0xc8,0x08 # check bit for clearing-by-ASCE bno 0f-.LPG1(%r13) @@ -263,45 +263,45 @@ startup_continue: oi 6(%r12),2 # set MVCOS flag 1: - lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 16 -.Lentry:.quad 0x0000000180000000,_stext -.Lctl: .quad 0x04b50002 # cr0: various things - .quad 0 # cr1: primary space segment table - .quad .Lduct # cr2: dispatchable unit control table - .quad 0 # cr3: instruction authorization - .quad 0 # cr4: instruction authorization - .quad 0xffffffffffffffff # cr5: primary-aste origin - .quad 0 # cr6: I/O interrupts - .quad 0 # cr7: secondary space segment table - .quad 0 # cr8: access registers translation - .quad 0 # cr9: tracing off - .quad 0 # cr10: tracing off - .quad 0 # cr11: tracing off - .quad 0 # cr12: tracing off - .quad 0 # cr13: home space segment table - .quad 0xc0000000 # cr14: machine check handling off - .quad 0 # cr15: linkage stack operations -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 -.Lpcmsk:.quad 0x0000000180000000 + lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 16 +.Lentry:.quad 0x0000000180000000,_stext +.Lctl: .quad 0x04b50002 # cr0: various things + .quad 0 # cr1: primary space segment table + .quad .Lduct # cr2: dispatchable unit control table + .quad 0 # cr3: instruction authorization + .quad 0 # cr4: instruction authorization + .quad 0xffffffffffffffff # cr5: primary-aste origin + .quad 0 # cr6: I/O interrupts + .quad 0 # cr7: secondary space segment table + .quad 0 # cr8: access registers translation + .quad 0 # cr9: tracing off + .quad 0 # cr10: tracing off + .quad 0 # cr11: tracing off + .quad 0 # cr12: tracing off + .quad 0 # cr13: home space segment table + .quad 0xc0000000 # cr14: machine check handling off + .quad 0 # cr15: linkage stack operations +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 +.Lpcmsk:.quad 0x0000000180000000 .L4malign:.quad 0xffffffffffc00000 -.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 -.Lnop: .long 0x07000700 +.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 +.Lnop: .long 0x07000700 .Lparmaddr: .quad PARMAREA - .globl ipl_schib + .globl ipl_schib ipl_schib: .rept 13 .long 0 .endr - .globl ipl_flags + .globl ipl_flags ipl_flags: - .long 0 - .globl ipl_devno + .long 0 + .globl ipl_devno ipl_devno: .word 0 @@ -309,47 +309,47 @@ ipl_devno: .globl s390_readinfo_sccb s390_readinfo_sccb: .Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set .Lsccbr: - .hword 0x00 # response code + .hword 0x00 # response code .Lscpincr1: - .hword 0x00 + .hword 0x00 .Lscpa1: - .byte 0x00 - .fill 89,1,0 + .byte 0x00 + .fill 89,1,0 .Lscpa2: - .int 0x00 + .int 0x00 .Lscpincr2: - .quad 0x00 - .fill 3984,1,0 + .quad 0x00 + .fill 3984,1,0 .org 0x13000 #ifdef CONFIG_SHARED_KERNEL - .org 0x100000 + .org 0x100000 #endif - + # # startup-code, running in absolute addressing mode # - .globl _stext -_stext: basr %r13,0 # get base + .globl _stext +_stext: basr %r13,0 # get base .LPG3: # check control registers - stctg %c0,%c15,0(%r15) - oi 6(%r15),0x40 # enable sigp emergency signal - oi 4(%r15),0x10 # switch on low address proctection - lctlg %c0,%c15,0(%r15) + stctg %c0,%c15,0(%r15) + oi 6(%r15),0x40 # enable sigp emergency signal + oi 4(%r15),0x10 # switch on low address proctection + lctlg %c0,%c15,0(%r15) - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - brasl %r14,start_kernel # go to C code + lam 0,15,.Laregs-.LPG3(%r13) # load acrs needed by uaccess + brasl %r14,start_kernel # go to C code # # We returned from start_kernel ?!? PANIK # - basr %r13,0 - lpswe .Ldw-.(%r13) # load disabled wait psw + basr %r13,0 + lpswe .Ldw-.(%r13) # load disabled wait psw - .align 8 -.Ldw: .quad 0x0002000180000000,0x0000000000000000 -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + .align 8 +.Ldw: .quad 0x0002000180000000,0x0000000000000000 +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 6555cc48e28..1f5e782b3d0 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -120,24 +120,15 @@ static enum shutdown_action on_panic_action = SHUTDOWN_STOP; static int diag308(unsigned long subcode, void *addr) { - register unsigned long _addr asm("0") = (unsigned long)addr; + register unsigned long _addr asm("0") = (unsigned long) addr; register unsigned long _rc asm("1") = 0; - asm volatile ( - " diag %0,%2,0x308\n" - "0: \n" - ".section __ex_table,\"a\"\n" -#ifdef CONFIG_64BIT - " .align 8\n" - " .quad 0b, 0b\n" -#else - " .align 4\n" - " .long 0b, 0b\n" -#endif - ".previous\n" + asm volatile( + " diag %0,%2,0x308\n" + "0:\n" + EX_TABLE(0b,0b) : "+d" (_addr), "+d" (_rc) - : "d" (subcode) : "cc", "memory" ); - + : "d" (subcode) : "cc", "memory"); return _rc; } diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index d3cbfa3005e..6603fbb41d0 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -45,7 +45,7 @@ #include <asm/irq.h> #include <asm/timer.h> -asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); +asmlinkage void ret_from_fork(void) asm ("ret_from_fork"); /* * Return saved PC of a blocked thread. used in kernel/sched. @@ -177,7 +177,8 @@ void show_regs(struct pt_regs *regs) extern void kernel_thread_starter(void); -__asm__(".align 4\n" +asm( + ".align 4\n" "kernel_thread_starter:\n" " la 2,0(10)\n" " basr 14,9\n" diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S index 4562cdbce8e..0340477f3b0 100644 --- a/arch/s390/kernel/reipl.S +++ b/arch/s390/kernel/reipl.S @@ -32,58 +32,58 @@ do_reipl_asm: basr %r13,0 st %r13, __LC_PSW_SAVE_AREA+4 lctl %c6,%c6,.Lall-.Lpg0(%r13) - lr %r1,%r2 - mvc __LC_PGM_NEW_PSW(8),.Lpcnew-.Lpg0(%r13) - stsch .Lschib-.Lpg0(%r13) - oi .Lschib+5-.Lpg0(%r13),0x84 -.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 - msch .Lschib-.Lpg0(%r13) - lhi %r0,5 -.Lssch: ssch .Liplorb-.Lpg0(%r13) + lr %r1,%r2 + mvc __LC_PGM_NEW_PSW(8),.Lpcnew-.Lpg0(%r13) + stsch .Lschib-.Lpg0(%r13) + oi .Lschib+5-.Lpg0(%r13),0x84 +.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 + msch .Lschib-.Lpg0(%r13) + lhi %r0,5 +.Lssch: ssch .Liplorb-.Lpg0(%r13) jz .L001 - brct %r0,.Lssch + brct %r0,.Lssch bas %r14,.Ldisab-.Lpg0(%r13) -.L001: mvc __LC_IO_NEW_PSW(8),.Lionew-.Lpg0(%r13) -.Ltpi: lpsw .Lwaitpsw-.Lpg0(%r13) +.L001: mvc __LC_IO_NEW_PSW(8),.Lionew-.Lpg0(%r13) +.Ltpi: lpsw .Lwaitpsw-.Lpg0(%r13) .Lcont: c %r1,__LC_SUBCHANNEL_ID jnz .Ltpi clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13) jnz .Ltpi - tsch .Liplirb-.Lpg0(%r13) + tsch .Liplirb-.Lpg0(%r13) tm .Liplirb+9-.Lpg0(%r13),0xbf - jz .L002 - bas %r14,.Ldisab-.Lpg0(%r13) -.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 - jz .L003 - bas %r14,.Ldisab-.Lpg0(%r13) + jz .L002 + bas %r14,.Ldisab-.Lpg0(%r13) +.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 + jz .L003 + bas %r14,.Ldisab-.Lpg0(%r13) .L003: spx .Lnull-.Lpg0(%r13) - st %r1,__LC_SUBCHANNEL_ID - lpsw 0 - sigp 0,0,0(6) -.Ldisab: st %r14,.Ldispsw+4-.Lpg0(%r13) + st %r1,__LC_SUBCHANNEL_ID + lpsw 0 + sigp 0,0,0(6) +.Ldisab: st %r14,.Ldispsw+4-.Lpg0(%r13) lpsw .Ldispsw-.Lpg0(%r13) - .align 8 + .align 8 .Lclkcmp: .quad 0x0000000000000000 .Lall: .long 0xff000000 -.Lnull: .long 0x00000000 +.Lnull: .long 0x00000000 .Lctlsave1: .long 0x00000000 .Lctlsave2: .long 0x00000000 - .align 8 -.Lnewpsw: .long 0x00080000,0x80000000+.Lpg1 -.Lpcnew: .long 0x00080000,0x80000000+.Lecs -.Lionew: .long 0x00080000,0x80000000+.Lcont + .align 8 +.Lnewpsw: .long 0x00080000,0x80000000+.Lpg1 +.Lpcnew: .long 0x00080000,0x80000000+.Lecs +.Lionew: .long 0x00080000,0x80000000+.Lcont .Lwaitpsw: .long 0x020a0000,0x00000000+.Ltpi -.Ldispsw: .long 0x000a0000,0x00000000 -.Liplccws: .long 0x02000000,0x60000018 - .long 0x08000008,0x20000001 +.Ldispsw: .long 0x000a0000,0x00000000 +.Liplccws: .long 0x02000000,0x60000018 + .long 0x08000008,0x20000001 .Liplorb: .long 0x0049504c,0x0040ff80 .long 0x00000000+.Liplccws -.Lschib: .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 +.Lschib: .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 .Liplirb: .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 @@ -92,6 +92,3 @@ do_reipl_asm: basr %r13,0 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 - - - diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 95bd1e234f6..de7435054f7 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -4,7 +4,7 @@ * S390 version * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation * Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com) - Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) */ #include <asm/lowcore.h> @@ -32,46 +32,46 @@ do_reipl_asm: basr %r13,0 stctg %c0,%c0,.Lregsave-.Lpg0(%r13) ni .Lregsave+4-.Lpg0(%r13),0xef lctlg %c0,%c0,.Lregsave-.Lpg0(%r13) - lgr %r1,%r2 - mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13) - stsch .Lschib-.Lpg0(%r13) - oi .Lschib+5-.Lpg0(%r13),0x84 -.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 - msch .Lschib-.Lpg0(%r13) - lghi %r0,5 -.Lssch: ssch .Liplorb-.Lpg0(%r13) + lgr %r1,%r2 + mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13) + stsch .Lschib-.Lpg0(%r13) + oi .Lschib+5-.Lpg0(%r13),0x84 +.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 + msch .Lschib-.Lpg0(%r13) + lghi %r0,5 +.Lssch: ssch .Liplorb-.Lpg0(%r13) jz .L001 - brct %r0,.Lssch + brct %r0,.Lssch bas %r14,.Ldisab-.Lpg0(%r13) -.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13) -.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13) +.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13) +.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13) .Lcont: c %r1,__LC_SUBCHANNEL_ID jnz .Ltpi clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13) jnz .Ltpi - tsch .Liplirb-.Lpg0(%r13) + tsch .Liplirb-.Lpg0(%r13) tm .Liplirb+9-.Lpg0(%r13),0xbf - jz .L002 - bas %r14,.Ldisab-.Lpg0(%r13) -.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 - jz .L003 - bas %r14,.Ldisab-.Lpg0(%r13) + jz .L002 + bas %r14,.Ldisab-.Lpg0(%r13) +.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 + jz .L003 + bas %r14,.Ldisab-.Lpg0(%r13) .L003: spx .Lnull-.Lpg0(%r13) - st %r1,__LC_SUBCHANNEL_ID - lhi %r1,0 # mode 0 = esa - slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esa mode - lpsw 0 -.Ldisab: sll %r14,1 - srl %r14,1 # need to kill hi bit to avoid specification exceptions. - st %r14,.Ldispsw+12-.Lpg0(%r13) + st %r1,__LC_SUBCHANNEL_ID + lhi %r1,0 # mode 0 = esa + slr %r0,%r0 # set cpuid to zero + sigp %r1,%r0,0x12 # switch to esa mode + lpsw 0 +.Ldisab: sll %r14,1 + srl %r14,1 # need to kill hi bit to avoid specification exceptions. + st %r14,.Ldispsw+12-.Lpg0(%r13) lpswe .Ldispsw-.Lpg0(%r13) - .align 8 + .align 8 .Lclkcmp: .quad 0x0000000000000000 .Lall: .quad 0x00000000ff000000 .Lregsave: .quad 0x0000000000000000 -.Lnull: .long 0x0000000000000000 - .align 16 +.Lnull: .long 0x0000000000000000 + .align 16 /* * These addresses have to be 31 bit otherwise * the sigp will throw a specifcation exception @@ -81,26 +81,26 @@ do_reipl_asm: basr %r13,0 * 31bit lpswe instruction a fact they appear to have * ommited from the pop. */ -.Lnewpsw: .quad 0x0000000080000000 - .quad .Lpg1 -.Lpcnew: .quad 0x0000000080000000 - .quad .Lecs -.Lionew: .quad 0x0000000080000000 - .quad .Lcont +.Lnewpsw: .quad 0x0000000080000000 + .quad .Lpg1 +.Lpcnew: .quad 0x0000000080000000 + .quad .Lecs +.Lionew: .quad 0x0000000080000000 + .quad .Lcont .Lwaitpsw: .quad 0x0202000080000000 - .quad .Ltpi -.Ldispsw: .quad 0x0002000080000000 - .quad 0x0000000000000000 -.Liplccws: .long 0x02000000,0x60000018 - .long 0x08000008,0x20000001 + .quad .Ltpi +.Ldispsw: .quad 0x0002000080000000 + .quad 0x0000000000000000 +.Liplccws: .long 0x02000000,0x60000018 + .long 0x08000008,0x20000001 .Liplorb: .long 0x0049504c,0x0040ff80 .long 0x00000000+.Liplccws -.Lschib: .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 +.Lschib: .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 .Liplirb: .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 @@ -109,4 +109,3 @@ do_reipl_asm: basr %r13,0 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 - diff --git a/arch/s390/kernel/relocate_kernel.S b/arch/s390/kernel/relocate_kernel.S index 2a25ec7147f..f9899ff2e5b 100644 --- a/arch/s390/kernel/relocate_kernel.S +++ b/arch/s390/kernel/relocate_kernel.S @@ -3,7 +3,7 @@ * * (C) Copyright IBM Corp. 2005 * - * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * Author(s): Rolf Adelsberger, * Heiko Carstens <heiko.carstens@de.ibm.com> * */ @@ -24,14 +24,14 @@ .text .globl relocate_kernel relocate_kernel: - basr %r13,0 #base address + basr %r13,0 # base address .base: - stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQ (external) - spx zero64-.base(%r13) #absolute addressing mode + stnsm sys_msk-.base(%r13),0xf8 # disable DAT and IRQ (external) + spx zero64-.base(%r13) # absolute addressing mode stctl %c0,%c15,ctlregs-.base(%r13) stm %r0,%r15,gprregs-.base(%r13) la %r1,load_psw-.base(%r13) - mvc 0(8,%r0),0(%r1) + mvc 0(8,%r0),0(%r1) la %r0,.back-.base(%r13) st %r0,4(%r0) oi 4(%r0),0x80 @@ -51,50 +51,50 @@ .back_pgm: lm %r0,%r15,gprregs-.base(%r13) .start_reloc: - lhi %r10,-1 #preparing the mask - sll %r10,12 #shift it such that it becomes 0xf000 + lhi %r10,-1 # preparing the mask + sll %r10,12 # shift it such that it becomes 0xf000 .top: - lhi %r7,4096 #load PAGE_SIZE in r7 - lhi %r9,4096 #load PAGE_SIZE in r9 - l %r5,0(%r2) #read another word for indirection page - ahi %r2,4 #increment pointer - tml %r5,0x1 #is it a destination page? - je .indir_check #NO, goto "indir_check" - lr %r6,%r5 #r6 = r5 - nr %r6,%r10 #mask it out and... - j .top #...next iteration + lhi %r7,4096 # load PAGE_SIZE in r7 + lhi %r9,4096 # load PAGE_SIZE in r9 + l %r5,0(%r2) # read another word for indirection page + ahi %r2,4 # increment pointer + tml %r5,0x1 # is it a destination page? + je .indir_check # NO, goto "indir_check" + lr %r6,%r5 # r6 = r5 + nr %r6,%r10 # mask it out and... + j .top # ...next iteration .indir_check: - tml %r5,0x2 #is it a indirection page? - je .done_test #NO, goto "done_test" - nr %r5,%r10 #YES, mask out, - lr %r2,%r5 #move it into the right register, - j .top #and read next... + tml %r5,0x2 # is it a indirection page? + je .done_test # NO, goto "done_test" + nr %r5,%r10 # YES, mask out, + lr %r2,%r5 # move it into the right register, + j .top # and read next... .done_test: - tml %r5,0x4 #is it the done indicator? - je .source_test #NO! Well, then it should be the source indicator... - j .done #ok, lets finish it here... + tml %r5,0x4 # is it the done indicator? + je .source_test # NO! Well, then it should be the source indicator... + j .done # ok, lets finish it here... .source_test: - tml %r5,0x8 #it should be a source indicator... - je .top #NO, ignore it... - lr %r8,%r5 #r8 = r5 - nr %r8,%r10 #masking - 0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0 + tml %r5,0x8 # it should be a source indicator... + je .top # NO, ignore it... + lr %r8,%r5 # r8 = r5 + nr %r8,%r10 # masking + 0: mvcle %r6,%r8,0x0 # copy PAGE_SIZE bytes from r8 to r6 - pad with 0 jo 0b j .top .done: - sr %r0,%r0 #clear register r0 - la %r4,load_psw-.base(%r13) #load psw-address into the register - o %r3,4(%r4) #or load address into psw + sr %r0,%r0 # clear register r0 + la %r4,load_psw-.base(%r13) # load psw-address into the register + o %r3,4(%r4) # or load address into psw st %r3,4(%r4) - mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0 + mvc 0(8,%r0),0(%r4) # copy psw to absolute address 0 tm have_diag308-.base(%r13),0x01 jno .no_diag308 diag %r0,%r0,0x308 .no_diag308: - sr %r1,%r1 #clear %r1 - sr %r2,%r2 #clear %r2 - sigp %r1,%r2,0x12 #set cpuid to zero - lpsw 0 #hopefully start new kernel... + sr %r1,%r1 # clear %r1 + sr %r2,%r2 # clear %r2 + sigp %r1,%r2,0x12 # set cpuid to zero + lpsw 0 # hopefully start new kernel... .align 8 zero64: diff --git a/arch/s390/kernel/relocate_kernel64.S b/arch/s390/kernel/relocate_kernel64.S index 8cdb86e8911..4fb443042d9 100644 --- a/arch/s390/kernel/relocate_kernel64.S +++ b/arch/s390/kernel/relocate_kernel64.S @@ -3,7 +3,7 @@ * * (C) Copyright IBM Corp. 2005 * - * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * Author(s): Rolf Adelsberger, * Heiko Carstens <heiko.carstens@de.ibm.com> * */ @@ -25,10 +25,10 @@ .text .globl relocate_kernel relocate_kernel: - basr %r13,0 #base address + basr %r13,0 # base address .base: - stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQs - spx zero64-.base(%r13) #absolute addressing mode + stnsm sys_msk-.base(%r13),0xf8 # disable DAT and IRQs + spx zero64-.base(%r13) # absolute addressing mode stctg %c0,%c15,ctlregs-.base(%r13) stmg %r0,%r15,gprregs-.base(%r13) lghi %r0,3 @@ -37,16 +37,16 @@ la %r0,.back_pgm-.base(%r13) stg %r0,0x1d8(%r0) la %r1,load_psw-.base(%r13) - mvc 0(8,%r0),0(%r1) + mvc 0(8,%r0),0(%r1) la %r0,.back-.base(%r13) st %r0,4(%r0) oi 4(%r0),0x80 lghi %r0,0 diag %r0,%r0,0x308 .back: - lhi %r1,1 #mode 1 = esame - sigp %r1,%r0,0x12 #switch to esame mode - sam64 #switch to 64 bit addressing mode + lhi %r1,1 # mode 1 = esame + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit addressing mode basr %r13,0 .back_base: oi have_diag308-.back_base(%r13),0x01 @@ -56,50 +56,50 @@ .back_pgm: lmg %r0,%r15,gprregs-.base(%r13) .top: - lghi %r7,4096 #load PAGE_SIZE in r7 - lghi %r9,4096 #load PAGE_SIZE in r9 - lg %r5,0(%r2) #read another word for indirection page - aghi %r2,8 #increment pointer - tml %r5,0x1 #is it a destination page? - je .indir_check #NO, goto "indir_check" - lgr %r6,%r5 #r6 = r5 - nill %r6,0xf000 #mask it out and... - j .top #...next iteration + lghi %r7,4096 # load PAGE_SIZE in r7 + lghi %r9,4096 # load PAGE_SIZE in r9 + lg %r5,0(%r2) # read another word for indirection page + aghi %r2,8 # increment pointer + tml %r5,0x1 # is it a destination page? + je .indir_check # NO, goto "indir_check" + lgr %r6,%r5 # r6 = r5 + nill %r6,0xf000 # mask it out and... + j .top # ...next iteration .indir_check: - tml %r5,0x2 #is it a indirection page? - je .done_test #NO, goto "done_test" - nill %r5,0xf000 #YES, mask out, - lgr %r2,%r5 #move it into the right register, - j .top #and read next... + tml %r5,0x2 # is it a indirection page? + je .done_test # NO, goto "done_test" + nill %r5,0xf000 # YES, mask out, + lgr %r2,%r5 # move it into the right register, + j .top # and read next... .done_test: - tml %r5,0x4 #is it the done indicator? - je .source_test #NO! Well, then it should be the source indicator... - j .done #ok, lets finish it here... + tml %r5,0x4 # is it the done indicator? + je .source_test # NO! Well, then it should be the source indicator... + j .done # ok, lets finish it here... .source_test: - tml %r5,0x8 #it should be a source indicator... - je .top #NO, ignore it... - lgr %r8,%r5 #r8 = r5 - nill %r8,0xf000 #masking - 0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0 + tml %r5,0x8 # it should be a source indicator... + je .top # NO, ignore it... + lgr %r8,%r5 # r8 = r5 + nill %r8,0xf000 # masking + 0: mvcle %r6,%r8,0x0 # copy PAGE_SIZE bytes from r8 to r6 - pad with 0 jo 0b - j .top + j .top .done: - sgr %r0,%r0 #clear register r0 - la %r4,load_psw-.base(%r13) #load psw-address into the register - o %r3,4(%r4) #or load address into psw + sgr %r0,%r0 # clear register r0 + la %r4,load_psw-.base(%r13) # load psw-address into the register + o %r3,4(%r4) # or load address into psw st %r3,4(%r4) - mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0 + mvc 0(8,%r0),0(%r4) # copy psw to absolute address 0 tm have_diag308-.base(%r13),0x01 jno .no_diag308 diag %r0,%r0,0x308 .no_diag308: - sam31 #31 bit mode - sr %r1,%r1 #erase register r1 - sr %r2,%r2 #erase register r2 - sigp %r1,%r2,0x12 #set cpuid to zero - lpsw 0 #hopefully start new kernel... + sam31 # 31 bit mode + sr %r1,%r1 # erase register r1 + sr %r2,%r2 # erase register r2 + sigp %r1,%r2,0x12 # set cpuid to zero + lpsw 0 # hopefully start new kernel... - .align 8 + .align 8 zero64: .quad 0 load_psw: diff --git a/arch/s390/kernel/semaphore.c b/arch/s390/kernel/semaphore.c index 8dfb690c159..191303f6c1d 100644 --- a/arch/s390/kernel/semaphore.c +++ b/arch/s390/kernel/semaphore.c @@ -26,17 +26,17 @@ static inline int __sem_update_count(struct semaphore *sem, int incr) { int old_val, new_val; - __asm__ __volatile__(" l %0,0(%3)\n" - "0: ltr %1,%0\n" - " jhe 1f\n" - " lhi %1,0\n" - "1: ar %1,%4\n" - " cs %0,%1,0(%3)\n" - " jl 0b\n" - : "=&d" (old_val), "=&d" (new_val), - "=m" (sem->count) - : "a" (&sem->count), "d" (incr), "m" (sem->count) - : "cc" ); + asm volatile( + " l %0,0(%3)\n" + "0: ltr %1,%0\n" + " jhe 1f\n" + " lhi %1,0\n" + "1: ar %1,%4\n" + " cs %0,%1,0(%3)\n" + " jl 0b\n" + : "=&d" (old_val), "=&d" (new_val), "=m" (sem->count) + : "a" (&sem->count), "d" (incr), "m" (sem->count) + : "cc"); return old_val; } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e3d9325f602..a21cfbb9d97 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -101,7 +101,7 @@ void __devinit cpu_init (void) /* * Store processor id in lowcore (used e.g. in timer_interrupt) */ - asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id)); + asm volatile("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id)); S390_lowcore.cpu_data.cpu_addr = addr; /* diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index b2e6f4c8d38..a8e6199755d 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -63,7 +63,7 @@ static void smp_ext_bitcall(int, ec_bit_sig); static void smp_ext_bitcall_others(ec_bit_sig); /* - * Structure and data for smp_call_function(). This is designed to minimise +5B * Structure and data for smp_call_function(). This is designed to minimise * static memory requirements. It also looks cleaner. */ static DEFINE_SPINLOCK(call_lock); @@ -418,59 +418,49 @@ void smp_send_reschedule(int cpu) /* * parameter area for the set/clear control bit callbacks */ -typedef struct -{ - __u16 start_ctl; - __u16 end_ctl; +struct ec_creg_mask_parms { unsigned long orvals[16]; unsigned long andvals[16]; -} ec_creg_mask_parms; +}; /* * callback for setting/clearing control bits */ void smp_ctl_bit_callback(void *info) { - ec_creg_mask_parms *pp; + struct ec_creg_mask_parms *pp = info; unsigned long cregs[16]; int i; - pp = (ec_creg_mask_parms *) info; - __ctl_store(cregs[pp->start_ctl], pp->start_ctl, pp->end_ctl); - for (i = pp->start_ctl; i <= pp->end_ctl; i++) + __ctl_store(cregs, 0, 15); + for (i = 0; i <= 15; i++) cregs[i] = (cregs[i] & pp->andvals[i]) | pp->orvals[i]; - __ctl_load(cregs[pp->start_ctl], pp->start_ctl, pp->end_ctl); + __ctl_load(cregs, 0, 15); } /* * Set a bit in a control register of all cpus */ -void smp_ctl_set_bit(int cr, int bit) { - ec_creg_mask_parms parms; +void smp_ctl_set_bit(int cr, int bit) +{ + struct ec_creg_mask_parms parms; - parms.start_ctl = cr; - parms.end_ctl = cr; + memset(&parms.orvals, 0, sizeof(parms.orvals)); + memset(&parms.andvals, 0xff, sizeof(parms.andvals)); parms.orvals[cr] = 1 << bit; - parms.andvals[cr] = -1L; - preempt_disable(); - smp_call_function(smp_ctl_bit_callback, &parms, 0, 1); - __ctl_set_bit(cr, bit); - preempt_enable(); + on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1); } /* * Clear a bit in a control register of all cpus */ -void smp_ctl_clear_bit(int cr, int bit) { - ec_creg_mask_parms parms; +void smp_ctl_clear_bit(int cr, int bit) +{ + struct ec_creg_mask_parms parms; - parms.start_ctl = cr; - parms.end_ctl = cr; - parms.orvals[cr] = 0; + memset(&parms.orvals, 0, sizeof(parms.orvals)); + memset(&parms.andvals, 0xff, sizeof(parms.andvals)); parms.andvals[cr] = ~(1L << bit); - preempt_disable(); - smp_call_function(smp_ctl_bit_callback, &parms, 0, 1); - __ctl_clear_bit(cr, bit); - preempt_enable(); + on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1); } /* @@ -650,9 +640,9 @@ __cpu_up(unsigned int cpu) sf->gprs[9] = (unsigned long) sf; cpu_lowcore->save_area[15] = (unsigned long) sf; __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15); - __asm__ __volatile__("stam 0,15,0(%0)" - : : "a" (&cpu_lowcore->access_regs_save_area) - : "memory"); + asm volatile( + " stam 0,15,0(%0)" + : : "a" (&cpu_lowcore->access_regs_save_area) : "memory"); cpu_lowcore->percpu_offset = __per_cpu_offset[cpu]; cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_data.cpu_nr = cpu; @@ -708,7 +698,7 @@ int __cpu_disable(void) { unsigned long flags; - ec_creg_mask_parms cr_parms; + struct ec_creg_mask_parms cr_parms; int cpu = smp_processor_id(); spin_lock_irqsave(&smp_reserve_lock, flags); @@ -724,30 +714,21 @@ __cpu_disable(void) pfault_fini(); #endif - /* disable all external interrupts */ + memset(&cr_parms.orvals, 0, sizeof(cr_parms.orvals)); + memset(&cr_parms.andvals, 0xff, sizeof(cr_parms.andvals)); - cr_parms.start_ctl = 0; - cr_parms.end_ctl = 0; + /* disable all external interrupts */ cr_parms.orvals[0] = 0; cr_parms.andvals[0] = ~(1<<15 | 1<<14 | 1<<13 | 1<<12 | 1<<11 | 1<<10 | 1<< 6 | 1<< 4); - smp_ctl_bit_callback(&cr_parms); - /* disable all I/O interrupts */ - - cr_parms.start_ctl = 6; - cr_parms.end_ctl = 6; cr_parms.orvals[6] = 0; cr_parms.andvals[6] = ~(1<<31 | 1<<30 | 1<<29 | 1<<28 | 1<<27 | 1<<26 | 1<<25 | 1<<24); - smp_ctl_bit_callback(&cr_parms); - /* disable most machine checks */ - - cr_parms.start_ctl = 14; - cr_parms.end_ctl = 14; cr_parms.orvals[14] = 0; cr_parms.andvals[14] = ~(1<<28 | 1<<27 | 1<<26 | 1<<25 | 1<<24); + smp_ctl_bit_callback(&cr_parms); spin_unlock_irqrestore(&smp_reserve_lock, flags); diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index de83f38288d..d9428a0fc8f 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -59,9 +59,7 @@ static inline unsigned long save_context_stack(struct stack_trace *trace, } } -void save_stack_trace(struct stack_trace *trace, - struct task_struct *task, int all_contexts, - unsigned int skip) +void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { register unsigned long sp asm ("15"); unsigned long orig_sp; @@ -69,22 +67,23 @@ void save_stack_trace(struct stack_trace *trace, sp &= PSW_ADDR_INSN; orig_sp = sp; - sp = save_context_stack(trace, &skip, sp, + sp = save_context_stack(trace, &trace->skip, sp, S390_lowcore.panic_stack - PAGE_SIZE, S390_lowcore.panic_stack); - if ((sp != orig_sp) && !all_contexts) + if ((sp != orig_sp) && !trace->all_contexts) return; - sp = save_context_stack(trace, &skip, sp, + sp = save_context_stack(trace, &trace->skip, sp, S390_lowcore.async_stack - ASYNC_SIZE, S390_lowcore.async_stack); - if ((sp != orig_sp) && !all_contexts) + if ((sp != orig_sp) && !trace->all_contexts) return; if (task) - save_context_stack(trace, &skip, sp, + save_context_stack(trace, &trace->skip, sp, (unsigned long) task_stack_page(task), (unsigned long) task_stack_page(task) + THREAD_SIZE); else - save_context_stack(trace, &skip, sp, S390_lowcore.thread_info, + save_context_stack(trace, &trace->skip, sp, + S390_lowcore.thread_info, S390_lowcore.thread_info + THREAD_SIZE); return; } diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 74e6178fbaf..1981c6199fa 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -351,10 +351,12 @@ void __init time_init(void) int cc; /* kick the TOD clock */ - asm volatile ("STCK 0(%1)\n\t" - "IPM %0\n\t" - "SRL %0,28" : "=r" (cc) : "a" (&init_timer_cc) - : "memory", "cc"); + asm volatile( + " stck 0(%2)\n" + " ipm %0\n" + " srl %0,28" + : "=d" (cc), "=m" (init_timer_cc) + : "a" (&init_timer_cc) : "cc"); switch (cc) { case 0: /* clock in set state: all is fine */ break; diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index c4982c96342..3eb4fab048b 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -597,8 +597,7 @@ asmlinkage void data_exception(struct pt_regs * regs, long interruption_code) local_irq_enable(); if (MACHINE_HAS_IEEE) - __asm__ volatile ("stfpc %0\n\t" - : "=m" (current->thread.fp_regs.fpc)); + asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc)); #ifdef CONFIG_MATHEMU else if (regs->psw.mask & PSW_MASK_PSTATE) { diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index c42ffedfdb4..b0cfa6c4883 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -5,5 +5,6 @@ EXTRA_AFLAGS := -traditional lib-y += delay.o string.o uaccess_std.o +lib-$(CONFIG_32BIT) += div64.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o lib-$(CONFIG_SMP) += spinlock.o diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 468f4ea33f9..027c4742a00 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -27,9 +27,7 @@ void __delay(unsigned long loops) * yield the megahertz number of the cpu. The important function * is udelay and that is done using the tod clock. -- martin. */ - __asm__ __volatile__( - "0: brct %0,0b" - : /* no outputs */ : "r" ((loops/2) + 1)); + asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1)); } /* @@ -38,13 +36,12 @@ void __delay(unsigned long loops) */ void __udelay(unsigned long usecs) { - uint64_t start_cc, end_cc; + uint64_t start_cc; if (usecs == 0) return; - asm volatile ("STCK %0" : "=m" (start_cc)); + start_cc = get_clock(); do { cpu_relax(); - asm volatile ("STCK %0" : "=m" (end_cc)); - } while (((end_cc - start_cc)/4096) < usecs); + } while (((get_clock() - start_cc)/4096) < usecs); } diff --git a/arch/s390/lib/div64.c b/arch/s390/lib/div64.c new file mode 100644 index 00000000000..0481f3424a1 --- /dev/null +++ b/arch/s390/lib/div64.c @@ -0,0 +1,151 @@ +/* + * arch/s390/lib/div64.c + * + * __div64_32 implementation for 31 bit. + * + * Copyright (C) IBM Corp. 2006 + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + */ + +#include <linux/types.h> +#include <linux/module.h> + +#ifdef CONFIG_MARCH_G5 + +/* + * Function to divide an unsigned 64 bit integer by an unsigned + * 31 bit integer using signed 64/32 bit division. + */ +static uint32_t __div64_31(uint64_t *n, uint32_t base) +{ + register uint32_t reg2 asm("2"); + register uint32_t reg3 asm("3"); + uint32_t *words = (uint32_t *) n; + uint32_t tmp; + + /* Special case base==1, remainder = 0, quotient = n */ + if (base == 1) + return 0; + /* + * Special case base==0 will cause a fixed point divide exception + * on the dr instruction and may not happen anyway. For the + * following calculation we can assume base > 1. The first + * signed 64 / 32 bit division with an upper half of 0 will + * give the correct upper half of the 64 bit quotient. + */ + reg2 = 0UL; + reg3 = words[0]; + asm volatile( + " dr %0,%2\n" + : "+d" (reg2), "+d" (reg3) : "d" (base) : "cc" ); + words[0] = reg3; + reg3 = words[1]; + /* + * To get the lower half of the 64 bit quotient and the 32 bit + * remainder we have to use a little trick. Since we only have + * a signed division the quotient can get too big. To avoid this + * the 64 bit dividend is halved, then the signed division will + * work. Afterwards the quotient and the remainder are doubled. + * If the last bit of the dividend has been one the remainder + * is increased by one then checked against the base. If the + * remainder has overflown subtract base and increase the + * quotient. Simple, no ? + */ + asm volatile( + " nr %2,%1\n" + " srdl %0,1\n" + " dr %0,%3\n" + " alr %0,%0\n" + " alr %1,%1\n" + " alr %0,%2\n" + " clr %0,%3\n" + " jl 0f\n" + " slr %0,%3\n" + " alr %1,%2\n" + "0:\n" + : "+d" (reg2), "+d" (reg3), "=d" (tmp) + : "d" (base), "2" (1UL) : "cc" ); + words[1] = reg3; + return reg2; +} + +/* + * Function to divide an unsigned 64 bit integer by an unsigned + * 32 bit integer using the unsigned 64/31 bit division. + */ +uint32_t __div64_32(uint64_t *n, uint32_t base) +{ + uint32_t r; + + /* + * If the most significant bit of base is set, divide n by + * (base/2). That allows to use 64/31 bit division and gives a + * good approximation of the result: n = (base/2)*q + r. The + * result needs to be corrected with two simple transformations. + * If base is already < 2^31-1 __div64_31 can be used directly. + */ + r = __div64_31(n, ((signed) base < 0) ? (base/2) : base); + if ((signed) base < 0) { + uint64_t q = *n; + /* + * First transformation: + * n = (base/2)*q + r + * = ((base/2)*2)*(q/2) + ((q&1) ? (base/2) : 0) + r + * Since r < (base/2), r + (base/2) < base. + * With q1 = (q/2) and r1 = r + ((q&1) ? (base/2) : 0) + * n = ((base/2)*2)*q1 + r1 with r1 < base. + */ + if (q & 1) + r += base/2; + q >>= 1; + /* + * Second transformation. ((base/2)*2) could have lost the + * last bit. + * n = ((base/2)*2)*q1 + r1 + * = base*q1 - ((base&1) ? q1 : 0) + r1 + */ + if (base & 1) { + int64_t rx = r - q; + /* + * base is >= 2^31. The worst case for the while + * loop is n=2^64-1 base=2^31+1. That gives a + * maximum for q=(2^64-1)/2^31 = 0x1ffffffff. Since + * base >= 2^31 the loop is finished after a maximum + * of three iterations. + */ + while (rx < 0) { + rx += base; + q--; + } + r = rx; + } + *n = q; + } + return r; +} + +#else /* MARCH_G5 */ + +uint32_t __div64_32(uint64_t *n, uint32_t base) +{ + register uint32_t reg2 asm("2"); + register uint32_t reg3 asm("3"); + uint32_t *words = (uint32_t *) n; + + reg2 = 0UL; + reg3 = words[0]; + asm volatile( + " dlr %0,%2\n" + : "+d" (reg2), "+d" (reg3) : "d" (base) : "cc" ); + words[0] = reg3; + reg3 = words[1]; + asm volatile( + " dlr %0,%2\n" + : "+d" (reg2), "+d" (reg3) : "d" (base) : "cc" ); + words[1] = reg3; + return reg2; +} + +#endif /* MARCH_G5 */ + +EXPORT_SYMBOL(__div64_32); diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index 86c96d6c191..121b2935a42 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -35,7 +35,7 @@ size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) tmp1 = -4096UL; asm volatile( "0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n" - " jz 4f\n" + " jz 7f\n" "1:"ALR" %0,%3\n" " "SLR" %1,%3\n" " "SLR" %2,%3\n" @@ -44,13 +44,23 @@ size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) " nr %4,%3\n" /* %4 = (ptr + 4095) & -4096 */ " "SLR" %4,%1\n" " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 5f\n" + " jnh 4f\n" "3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n" " "SLR" %0,%4\n" - " j 5f\n" - "4:"SLR" %0,%0\n" - "5: \n" - EX_TABLE(0b,2b) EX_TABLE(3b,5b) + " "ALR" %2,%4\n" + "4:"LHI" %4,-1\n" + " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ + " bras %3,6f\n" /* memset loop */ + " xc 0(1,%2),0(%2)\n" + "5: xc 0(256,%2),0(%2)\n" + " la %2,256(%2)\n" + "6:"AHI" %4,-256\n" + " jnm 5b\n" + " ex %4,0(%3)\n" + " j 8f\n" + "7:"SLR" %0,%0\n" + "8: \n" + EX_TABLE(0b,2b) EX_TABLE(3b,4b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : "d" (reg0) : "cc", "memory"); return size; diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 9a4d4a29ea7..f44f0078b35 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -35,25 +35,35 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) tmp1 = -256UL; asm volatile( "0: mvcp 0(%0,%2),0(%1),%3\n" - " jz 5f\n" + " jz 8f\n" "1:"ALR" %0,%3\n" " la %1,256(%1)\n" " la %2,256(%2)\n" "2: mvcp 0(%0,%2),0(%1),%3\n" " jnz 1b\n" - " j 5f\n" + " j 8f\n" "3: la %4,255(%1)\n" /* %4 = ptr + 255 */ " "LHI" %3,-4096\n" " nr %4,%3\n" /* %4 = (ptr + 255) & -4096 */ " "SLR" %4,%1\n" " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 6f\n" + " jnh 5f\n" "4: mvcp 0(%4,%2),0(%1),%3\n" " "SLR" %0,%4\n" - " j 6f\n" - "5:"SLR" %0,%0\n" - "6: \n" - EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b) + " "ALR" %2,%4\n" + "5:"LHI" %4,-1\n" + " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ + " bras %3,7f\n" /* memset loop */ + " xc 0(1,%2),0(%2)\n" + "6: xc 0(256,%2),0(%2)\n" + " la %2,256(%2)\n" + "7:"AHI" %4,-256\n" + " jnm 6b\n" + " ex %4,0(%3)\n" + " j 9f\n" + "8:"SLR" %0,%0\n" + "9: \n" + EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : : "cc", "memory"); return size; @@ -67,16 +77,22 @@ size_t copy_from_user_std_small(size_t size, const void __user *ptr, void *x) asm volatile( "0: mvcp 0(%0,%2),0(%1),%3\n" " "SLR" %0,%0\n" - " j 3f\n" + " j 5f\n" "1: la %4,255(%1)\n" /* %4 = ptr + 255 */ " "LHI" %3,-4096\n" " nr %4,%3\n" /* %4 = (ptr + 255) & -4096 */ " "SLR" %4,%1\n" " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 3f\n" + " jnh 5f\n" "2: mvcp 0(%4,%2),0(%1),%3\n" " "SLR" %0,%4\n" - "3:\n" + " "ALR" %2,%4\n" + "3:"LHI" %4,-1\n" + " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ + " bras %3,4f\n" + " xc 0(1,%2),0(%2)\n" + "4: ex %4,0(%3)\n" + "5:\n" EX_TABLE(0b,1b) EX_TABLE(2b,3b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : : "cc", "memory"); diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index b4957c84e4d..6b9aec5a2c1 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -1564,52 +1564,52 @@ static int emu_tceb (struct pt_regs *regs, int rx, long val) { } static inline void emu_load_regd(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* load reg from fp_regs.fprs[reg] */ - " bras 1,0f\n" - " ld 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4),"a" (¤t->thread.fp_regs.fprs[reg].d) - : "1" ); + asm volatile( /* load reg from fp_regs.fprs[reg] */ + " bras 1,0f\n" + " ld 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4),"a" (¤t->thread.fp_regs.fprs[reg].d) + : "1"); } static inline void emu_load_rege(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* load reg from fp_regs.fprs[reg] */ - " bras 1,0f\n" - " le 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) - : "1" ); + asm volatile( /* load reg from fp_regs.fprs[reg] */ + " bras 1,0f\n" + " le 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) + : "1"); } static inline void emu_store_regd(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* store reg to fp_regs.fprs[reg] */ - " bras 1,0f\n" - " std 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].d) - : "1" ); + asm volatile( /* store reg to fp_regs.fprs[reg] */ + " bras 1,0f\n" + " std 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].d) + : "1"); } static inline void emu_store_rege(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* store reg to fp_regs.fprs[reg] */ - " bras 1,0f\n" - " ste 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) - : "1" ); + asm volatile( /* store reg to fp_regs.fprs[reg] */ + " bras 1,0f\n" + " ste 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) + : "1"); } int math_emu_b3(__u8 *opcode, struct pt_regs * regs) { @@ -2089,23 +2089,22 @@ int math_emu_ldr(__u8 *opcode) { if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ /* we got an exception therfore ry can't be in {0,2,4,6} */ - __asm__ __volatile ( /* load rx from fp_regs.fprs[ry] */ - " bras 1,0f\n" - " ld 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (opc & 0xf0), - "a" (&fp_regs->fprs[opc & 0xf].d) - : "1" ); + asm volatile( /* load rx from fp_regs.fprs[ry] */ + " bras 1,0f\n" + " ld 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (opc & 0xf0), "a" (&fp_regs->fprs[opc & 0xf].d) + : "1"); } else if ((opc & 0x9) == 0) { /* test if ry in {0,2,4,6} */ - __asm__ __volatile ( /* store ry to fp_regs.fprs[rx] */ - " bras 1,0f\n" - " std 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" ((opc & 0xf) << 4), - "a" (&fp_regs->fprs[(opc & 0xf0)>>4].d) - : "1" ); + asm volatile ( /* store ry to fp_regs.fprs[rx] */ + " bras 1,0f\n" + " std 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" ((opc & 0xf) << 4), + "a" (&fp_regs->fprs[(opc & 0xf0)>>4].d) + : "1"); } else /* move fp_regs.fprs[ry] to fp_regs.fprs[rx] */ fp_regs->fprs[(opc & 0xf0) >> 4] = fp_regs->fprs[opc & 0xf]; return 0; @@ -2120,23 +2119,22 @@ int math_emu_ler(__u8 *opcode) { if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ /* we got an exception therfore ry can't be in {0,2,4,6} */ - __asm__ __volatile ( /* load rx from fp_regs.fprs[ry] */ - " bras 1,0f\n" - " le 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (opc & 0xf0), - "a" (&fp_regs->fprs[opc & 0xf].f) - : "1" ); + asm volatile( /* load rx from fp_regs.fprs[ry] */ + " bras 1,0f\n" + " le 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (opc & 0xf0), "a" (&fp_regs->fprs[opc & 0xf].f) + : "1"); } else if ((opc & 0x9) == 0) { /* test if ry in {0,2,4,6} */ - __asm__ __volatile ( /* store ry to fp_regs.fprs[rx] */ - " bras 1,0f\n" - " ste 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" ((opc & 0xf) << 4), - "a" (&fp_regs->fprs[(opc & 0xf0) >> 4].f) - : "1" ); + asm volatile( /* store ry to fp_regs.fprs[rx] */ + " bras 1,0f\n" + " ste 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" ((opc & 0xf) << 4), + "a" (&fp_regs->fprs[(opc & 0xf0) >> 4].f) + : "1"); } else /* move fp_regs.fprs[ry] to fp_regs.fprs[rx] */ fp_regs->fprs[(opc & 0xf0) >> 4] = fp_regs->fprs[opc & 0xf]; return 0; diff --git a/arch/s390/math-emu/sfp-util.h b/arch/s390/math-emu/sfp-util.h index ab556b600f7..5b6ca4570ea 100644 --- a/arch/s390/math-emu/sfp-util.h +++ b/arch/s390/math-emu/sfp-util.h @@ -4,48 +4,51 @@ #include <asm/byteorder.h> #define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - __asm__ (" alr %1,%3\n" \ - " brc 12,0f\n" \ - " ahi %0,1\n" \ - "0: alr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc" ); \ - (sh) = __sh; \ - (sl) = __sl; \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " alr %1,%3\n" \ + " brc 12,0f\n" \ + " ahi %0,1\n" \ + "0: alr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ }) #define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - __asm__ (" slr %1,%3\n" \ - " brc 3,0f\n" \ - " ahi %0,-1\n" \ - "0: slr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc" ); \ - (sh) = __sh; \ - (sl) = __sl; \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " slr %1,%3\n" \ + " brc 3,0f\n" \ + " ahi %0,-1\n" \ + "0: slr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ }) /* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */ #define umul_ppmm(wh, wl, u, v) ({ \ - unsigned int __wh = u; \ - unsigned int __wl = v; \ - __asm__ (" ltr 1,%0\n" \ - " mr 0,%1\n" \ - " jnm 0f\n" \ - " alr 0,%1\n" \ - "0: ltr %1,%1\n" \ - " jnm 1f\n" \ - " alr 0,%0\n" \ - "1: lr %0,0\n" \ - " lr %1,1\n" \ - : "+d" (__wh), "+d" (__wl) \ - : : "0", "1", "cc" ); \ - wh = __wh; \ - wl = __wl; \ + unsigned int __wh = u; \ + unsigned int __wl = v; \ + asm volatile( \ + " ltr 1,%0\n" \ + " mr 0,%1\n" \ + " jnm 0f\n" \ + " alr 0,%1\n" \ + "0: ltr %1,%1\n" \ + " jnm 1f\n" \ + " alr 0,%0\n" \ + "1: lr %0,0\n" \ + " lr %1,1\n" \ + : "+d" (__wh), "+d" (__wl) \ + : : "0", "1", "cc"); \ + wh = __wh; \ + wl = __wl; \ }) #define udiv_qrnnd(q, r, n1, n0, d) \ diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index 786a44dba5b..607f50ead1f 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -15,6 +15,8 @@ #include <linux/sched.h> #include <linux/sysctl.h> #include <linux/ctype.h> +#include <linux/swap.h> +#include <linux/kthread.h> #include <asm/pgalloc.h> #include <asm/uaccess.h> @@ -34,18 +36,18 @@ struct cmm_page_array { unsigned long pages[CMM_NR_PAGES]; }; -static long cmm_pages = 0; -static long cmm_timed_pages = 0; -static volatile long cmm_pages_target = 0; -static volatile long cmm_timed_pages_target = 0; -static long cmm_timeout_pages = 0; -static long cmm_timeout_seconds = 0; +static long cmm_pages; +static long cmm_timed_pages; +static volatile long cmm_pages_target; +static volatile long cmm_timed_pages_target; +static long cmm_timeout_pages; +static long cmm_timeout_seconds; -static struct cmm_page_array *cmm_page_list = NULL; -static struct cmm_page_array *cmm_timed_page_list = NULL; +static struct cmm_page_array *cmm_page_list; +static struct cmm_page_array *cmm_timed_page_list; +static DEFINE_SPINLOCK(cmm_lock); -static unsigned long cmm_thread_active = 0; -static struct work_struct cmm_thread_starter; +static struct task_struct *cmm_thread_ptr; static wait_queue_head_t cmm_thread_wait; static struct timer_list cmm_timer; @@ -53,71 +55,100 @@ static void cmm_timer_fn(unsigned long); static void cmm_set_timer(void); static long -cmm_alloc_pages(long pages, long *counter, struct cmm_page_array **list) +cmm_alloc_pages(long nr, long *counter, struct cmm_page_array **list) { - struct cmm_page_array *pa; - unsigned long page; + struct cmm_page_array *pa, *npa; + unsigned long addr; - pa = *list; - while (pages) { - page = __get_free_page(GFP_NOIO); - if (!page) + while (nr) { + addr = __get_free_page(GFP_NOIO); + if (!addr) break; + spin_lock(&cmm_lock); + pa = *list; if (!pa || pa->index >= CMM_NR_PAGES) { /* Need a new page for the page list. */ - pa = (struct cmm_page_array *) + spin_unlock(&cmm_lock); + npa = (struct cmm_page_array *) __get_free_page(GFP_NOIO); - if (!pa) { - free_page(page); + if (!npa) { + free_page(addr); break; } - pa->next = *list; - pa->index = 0; - *list = pa; + spin_lock(&cmm_lock); + pa = *list; + if (!pa || pa->index >= CMM_NR_PAGES) { + npa->next = pa; + npa->index = 0; + pa = npa; + *list = pa; + } else + free_page((unsigned long) npa); } - diag10(page); - pa->pages[pa->index++] = page; + diag10(addr); + pa->pages[pa->index++] = addr; (*counter)++; - pages--; + spin_unlock(&cmm_lock); + nr--; } - return pages; + return nr; } -static void -cmm_free_pages(long pages, long *counter, struct cmm_page_array **list) +static long +cmm_free_pages(long nr, long *counter, struct cmm_page_array **list) { struct cmm_page_array *pa; - unsigned long page; + unsigned long addr; + spin_lock(&cmm_lock); pa = *list; - while (pages) { + while (nr) { if (!pa || pa->index <= 0) break; - page = pa->pages[--pa->index]; + addr = pa->pages[--pa->index]; if (pa->index == 0) { pa = pa->next; free_page((unsigned long) *list); *list = pa; } - free_page(page); + free_page(addr); (*counter)--; - pages--; + nr--; } + spin_unlock(&cmm_lock); + return nr; } +static int cmm_oom_notify(struct notifier_block *self, + unsigned long dummy, void *parm) +{ + unsigned long *freed = parm; + long nr = 256; + + nr = cmm_free_pages(nr, &cmm_timed_pages, &cmm_timed_page_list); + if (nr > 0) + nr = cmm_free_pages(nr, &cmm_pages, &cmm_page_list); + cmm_pages_target = cmm_pages; + cmm_timed_pages_target = cmm_timed_pages; + *freed += 256 - nr; + return NOTIFY_OK; +} + +static struct notifier_block cmm_oom_nb = { + .notifier_call = cmm_oom_notify +}; + static int cmm_thread(void *dummy) { int rc; - daemonize("cmmthread"); while (1) { rc = wait_event_interruptible(cmm_thread_wait, (cmm_pages != cmm_pages_target || - cmm_timed_pages != cmm_timed_pages_target)); - if (rc == -ERESTARTSYS) { - /* Got kill signal. End thread. */ - clear_bit(0, &cmm_thread_active); + cmm_timed_pages != cmm_timed_pages_target || + kthread_should_stop())); + if (kthread_should_stop() || rc == -ERESTARTSYS) { cmm_pages_target = cmm_pages; cmm_timed_pages_target = cmm_timed_pages; break; @@ -143,16 +174,8 @@ cmm_thread(void *dummy) } static void -cmm_start_thread(void) -{ - kernel_thread(cmm_thread, NULL, 0); -} - -static void cmm_kick_thread(void) { - if (!test_and_set_bit(0, &cmm_thread_active)) - schedule_work(&cmm_thread_starter); wake_up(&cmm_thread_wait); } @@ -177,21 +200,21 @@ cmm_set_timer(void) static void cmm_timer_fn(unsigned long ignored) { - long pages; + long nr; - pages = cmm_timed_pages_target - cmm_timeout_pages; - if (pages < 0) + nr = cmm_timed_pages_target - cmm_timeout_pages; + if (nr < 0) cmm_timed_pages_target = 0; else - cmm_timed_pages_target = pages; + cmm_timed_pages_target = nr; cmm_kick_thread(); cmm_set_timer(); } void -cmm_set_pages(long pages) +cmm_set_pages(long nr) { - cmm_pages_target = pages; + cmm_pages_target = nr; cmm_kick_thread(); } @@ -202,9 +225,9 @@ cmm_get_pages(void) } void -cmm_add_timed_pages(long pages) +cmm_add_timed_pages(long nr) { - cmm_timed_pages_target += pages; + cmm_timed_pages_target += nr; cmm_kick_thread(); } @@ -215,9 +238,9 @@ cmm_get_timed_pages(void) } void -cmm_set_timeout(long pages, long seconds) +cmm_set_timeout(long nr, long seconds) { - cmm_timeout_pages = pages; + cmm_timeout_pages = nr; cmm_timeout_seconds = seconds; cmm_set_timer(); } @@ -245,7 +268,7 @@ cmm_pages_handler(ctl_table *ctl, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos) { char buf[16], *p; - long pages; + long nr; int len; if (!*lenp || (*ppos && !write)) { @@ -260,17 +283,17 @@ cmm_pages_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; buf[sizeof(buf) - 1] = '\0'; cmm_skip_blanks(buf, &p); - pages = simple_strtoul(p, &p, 0); + nr = simple_strtoul(p, &p, 0); if (ctl == &cmm_table[0]) - cmm_set_pages(pages); + cmm_set_pages(nr); else - cmm_add_timed_pages(pages); + cmm_add_timed_pages(nr); } else { if (ctl == &cmm_table[0]) - pages = cmm_get_pages(); + nr = cmm_get_pages(); else - pages = cmm_get_timed_pages(); - len = sprintf(buf, "%ld\n", pages); + nr = cmm_get_timed_pages(); + len = sprintf(buf, "%ld\n", nr); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) @@ -286,7 +309,7 @@ cmm_timeout_handler(ctl_table *ctl, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos) { char buf[64], *p; - long pages, seconds; + long nr, seconds; int len; if (!*lenp || (*ppos && !write)) { @@ -301,10 +324,10 @@ cmm_timeout_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; buf[sizeof(buf) - 1] = '\0'; cmm_skip_blanks(buf, &p); - pages = simple_strtoul(p, &p, 0); + nr = simple_strtoul(p, &p, 0); cmm_skip_blanks(p, &p); seconds = simple_strtoul(p, &p, 0); - cmm_set_timeout(pages, seconds); + cmm_set_timeout(nr, seconds); } else { len = sprintf(buf, "%ld %ld\n", cmm_timeout_pages, cmm_timeout_seconds); @@ -357,7 +380,7 @@ static struct ctl_table cmm_dir_table[] = { static void cmm_smsg_target(char *from, char *msg) { - long pages, seconds; + long nr, seconds; if (strlen(sender) > 0 && strcmp(from, sender) != 0) return; @@ -366,27 +389,27 @@ cmm_smsg_target(char *from, char *msg) if (strncmp(msg, "SHRINK", 6) == 0) { if (!cmm_skip_blanks(msg + 6, &msg)) return; - pages = simple_strtoul(msg, &msg, 0); + nr = simple_strtoul(msg, &msg, 0); cmm_skip_blanks(msg, &msg); if (*msg == '\0') - cmm_set_pages(pages); + cmm_set_pages(nr); } else if (strncmp(msg, "RELEASE", 7) == 0) { if (!cmm_skip_blanks(msg + 7, &msg)) return; - pages = simple_strtoul(msg, &msg, 0); + nr = simple_strtoul(msg, &msg, 0); cmm_skip_blanks(msg, &msg); if (*msg == '\0') - cmm_add_timed_pages(pages); + cmm_add_timed_pages(nr); } else if (strncmp(msg, "REUSE", 5) == 0) { if (!cmm_skip_blanks(msg + 5, &msg)) return; - pages = simple_strtoul(msg, &msg, 0); + nr = simple_strtoul(msg, &msg, 0); if (!cmm_skip_blanks(msg, &msg)) return; seconds = simple_strtoul(msg, &msg, 0); cmm_skip_blanks(msg, &msg); if (*msg == '\0') - cmm_set_timeout(pages, seconds); + cmm_set_timeout(nr, seconds); } } #endif @@ -396,21 +419,49 @@ struct ctl_table_header *cmm_sysctl_header; static int cmm_init (void) { + int rc = -ENOMEM; + #ifdef CONFIG_CMM_PROC cmm_sysctl_header = register_sysctl_table(cmm_dir_table, 1); + if (!cmm_sysctl_header) + goto out; #endif #ifdef CONFIG_CMM_IUCV - smsg_register_callback(SMSG_PREFIX, cmm_smsg_target); + rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target); + if (rc < 0) + goto out_smsg; #endif - INIT_WORK(&cmm_thread_starter, (void *) cmm_start_thread, NULL); + rc = register_oom_notifier(&cmm_oom_nb); + if (rc < 0) + goto out_oom_notify; init_waitqueue_head(&cmm_thread_wait); init_timer(&cmm_timer); - return 0; + cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); + rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0; + if (!rc) + goto out; + /* + * kthread_create failed. undo all the stuff from above again. + */ + unregister_oom_notifier(&cmm_oom_nb); + +out_oom_notify: +#ifdef CONFIG_CMM_IUCV + smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target); +out_smsg: +#endif +#ifdef CONFIG_CMM_PROC + unregister_sysctl_table(cmm_sysctl_header); +#endif +out: + return rc; } static void cmm_exit(void) { + kthread_stop(cmm_thread_ptr); + unregister_oom_notifier(&cmm_oom_nb); cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list); cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list); #ifdef CONFIG_CMM_PROC diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 9b11e3e2090..226275d5c4f 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -142,17 +142,17 @@ dcss_diag (__u8 func, void *parameter, rx = (unsigned long) parameter; ry = (unsigned long) func; - __asm__ __volatile__( + asm volatile( #ifdef CONFIG_64BIT - " sam31\n" // switch to 31 bit - " diag %0,%1,0x64\n" - " sam64\n" // switch back to 64 bit + " sam31\n" + " diag %0,%1,0x64\n" + " sam64\n" #else - " diag %0,%1,0x64\n" + " diag %0,%1,0x64\n" #endif - " ipm %2\n" - " srl %2,28\n" - : "+d" (rx), "+d" (ry), "=d" (rc) : : "cc" ); + " ipm %2\n" + " srl %2,28\n" + : "+d" (rx), "+d" (ry), "=d" (rc) : : "cc"); *ret1 = rx; *ret2 = ry; return rc; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 44f0cda7e72..f2b9a84dc2b 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -355,6 +355,7 @@ out_of_memory: up_read(&mm->mmap_sem); if (tsk->pid == 1) { yield(); + down_read(&mm->mmap_sem); goto survive; } printk("VM: killing process %s\n", tsk->comm); @@ -423,20 +424,13 @@ int pfault_init(void) if (pfault_disable) return -1; - __asm__ __volatile__( - " diag %1,%0,0x258\n" - "0: j 2f\n" - "1: la %0,8\n" + asm volatile( + " diag %1,%0,0x258\n" + "0: j 2f\n" + "1: la %0,8\n" "2:\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" -#ifndef CONFIG_64BIT - " .long 0b,1b\n" -#else /* CONFIG_64BIT */ - " .quad 0b,1b\n" -#endif /* CONFIG_64BIT */ - ".previous" - : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" ); + EX_TABLE(0b,1b) + : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc"); __ctl_set_bit(0, 9); return rc; } @@ -449,18 +443,11 @@ void pfault_fini(void) if (pfault_disable) return; __ctl_clear_bit(0,9); - __asm__ __volatile__( - " diag %0,0,0x258\n" + asm volatile( + " diag %0,0,0x258\n" "0:\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" -#ifndef CONFIG_64BIT - " .long 0b,0b\n" -#else /* CONFIG_64BIT */ - " .quad 0b,0b\n" -#endif /* CONFIG_64BIT */ - ".previous" - : : "a" (&refbk), "m" (refbk) : "cc" ); + EX_TABLE(0b,0b) + : : "a" (&refbk), "m" (refbk) : "cc"); } asmlinkage void diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index cfd9b8f7a52..127044e1707 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -45,26 +45,17 @@ void diag10(unsigned long addr) { if (addr >= 0x7ff00000) return; + asm volatile( #ifdef CONFIG_64BIT - asm volatile ( - " sam31\n" - " diag %0,%0,0x10\n" - "0: sam64\n" - ".section __ex_table,\"a\"\n" - " .align 8\n" - " .quad 0b, 0b\n" - ".previous\n" - : : "a" (addr)); + " sam31\n" + " diag %0,%0,0x10\n" + "0: sam64\n" #else - asm volatile ( - " diag %0,%0,0x10\n" + " diag %0,%0,0x10\n" "0:\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 0b, 0b\n" - ".previous\n" - : : "a" (addr)); #endif + EX_TABLE(0b,0b) + : : "a" (addr)); } void show_mem(void) @@ -156,11 +147,10 @@ void __init paging_init(void) S390_lowcore.kernel_asce = pgdir_k; /* enable virtual mapping in kernel mode */ - __asm__ __volatile__(" LCTL 1,1,%0\n" - " LCTL 7,7,%0\n" - " LCTL 13,13,%0\n" - " SSM %1" - : : "m" (pgdir_k), "m" (ssm_mask)); + __ctl_load(pgdir_k, 1, 1); + __ctl_load(pgdir_k, 7, 7); + __ctl_load(pgdir_k, 13, 13); + __raw_local_irq_ssm(ssm_mask); local_flush_tlb(); return; @@ -241,11 +231,10 @@ void __init paging_init(void) S390_lowcore.kernel_asce = pgdir_k; /* enable virtual mapping in kernel mode */ - __asm__ __volatile__("lctlg 1,1,%0\n\t" - "lctlg 7,7,%0\n\t" - "lctlg 13,13,%0\n\t" - "ssm %1" - : :"m" (pgdir_k), "m" (ssm_mask)); + __ctl_load(pgdir_k, 1, 1); + __ctl_load(pgdir_k, 7, 7); + __ctl_load(pgdir_k, 13, 13); + __raw_local_irq_ssm(ssm_mask); local_flush_tlb(); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1a0db1d4c95..1cc5c9b27bf 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration" config SUPERH bool default y + select EMBEDDED help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast @@ -51,18 +52,23 @@ source "init/Kconfig" menu "System type" +config SOLUTION_ENGINE + bool + choice prompt "SuperH system type" default SH_UNKNOWN config SH_SOLUTION_ENGINE bool "SolutionEngine" + select SOLUTION_ENGINE help Select SolutionEngine if configuring for a Hitachi SH7709 or SH7750 evaluation board. config SH_7751_SOLUTION_ENGINE bool "SolutionEngine7751" + select SOLUTION_ENGINE select CPU_SUBTYPE_SH7751 help Select 7751 SolutionEngine if configuring for a Hitachi SH7751 @@ -70,17 +76,27 @@ config SH_7751_SOLUTION_ENGINE config SH_7300_SOLUTION_ENGINE bool "SolutionEngine7300" + select SOLUTION_ENGINE select CPU_SUBTYPE_SH7300 help - Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V) - evaluation board. + Select 7300 SolutionEngine if configuring for a Hitachi + SH7300(SH-Mobile V) evaluation board. + +config SH_7343_SOLUTION_ENGINE + bool "SolutionEngine7343" + select SOLUTION_ENGINE + select CPU_SUBTYPE_SH7343 + help + Select 7343 SolutionEngine if configuring for a Hitachi + SH7343 (SH-Mobile 3AS) evaluation board. config SH_73180_SOLUTION_ENGINE bool "SolutionEngine73180" - select CPU_SUBTYPE_SH73180 - help - Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3) - evaluation board. + select SOLUTION_ENGINE + select CPU_SUBTYPE_SH73180 + help + Select 73180 SolutionEngine if configuring for a Hitachi + SH73180(SH-Mobile 3) evaluation board. config SH_7751_SYSTEMH bool "SystemH7751R" @@ -89,12 +105,6 @@ config SH_7751_SYSTEMH Select SystemH if you are configuring for a Renesas SystemH 7751R evaluation board. -config SH_STB1_HARP - bool "STB1_Harp" - -config SH_STB1_OVERDRIVE - bool "STB1_Overdrive" - config SH_HP6XX bool "HP6XX" help @@ -102,19 +112,6 @@ config SH_HP6XX More information (hardware only) at <http://www.hp.com/jornada/>. -config SH_CQREEK - bool "CqREEK" - help - Select CqREEK if configuring for a CqREEK SH7708 or SH7750. - More information at - <http://sources.redhat.com/ecos/hardware.html#SuperH>. - -config SH_DMIDA - bool "DMIDA" - help - Select DMIDA if configuring for a DataMyte 4000 Industrial - Digital Assistant. More information at <http://www.dmida.com/>. - config SH_EC3104 bool "EC3104" help @@ -136,25 +133,9 @@ config SH_DREAMCAST <http://www.m17n.org/linux-sh/dreamcast/>. There is a Dreamcast project is at <http://linuxdc.sourceforge.net/>. -config SH_CAT68701 - bool "CAT68701" - config SH_BIGSUR bool "BigSur" -config SH_SH2000 - bool "SH2000" - select CPU_SUBTYPE_SH7709 - help - SH-2000 is a single-board computer based around SH7709A chip - intended for embedded applications. - It has an Ethernet interface (CS8900A), direct connected - Compact Flash socket, three serial ports and PC-104 bus. - More information at <http://sh2000.sh-linux.org>. - -config SH_ADX - bool "ADX" - config SH_MPC1211 bool "Interface MPC1211" help @@ -184,6 +165,13 @@ config SH_HS7751RVOIP Select HS7751RVOIP if configuring for a Renesas Technology Sales VoIP board. +config SH_7710VOIPGW + bool "SH7710-VOIP-GW" + select CPU_SUBTYPE_SH7710 + help + Select this option to build a kernel for the SH7710 based + VOIP GW. + config SH_RTS7751R2D bool "RTS7751R2D" select CPU_SUBTYPE_SH7751R @@ -222,6 +210,12 @@ config SH_TITAN Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. +config SH_SHMIN + bool "SHMIN" + select CPU_SUBTYPE_SH7706 + help + Select SHMIN if configureing for the SHMIN board + config SH_UNKNOWN bool "BareCPU" help @@ -238,35 +232,9 @@ endchoice source "arch/sh/mm/Kconfig" -config MEMORY_START - hex "Physical memory start address" - default "0x08000000" - ---help--- - Computers built with Hitachi SuperH processors always - map the ROM starting at address zero. But the processor - does not specify the range that RAM takes. - - The physical memory (RAM) start address will be automatically - set to 08000000. Other platforms, such as the Solution Engine - boards typically map RAM at 0C000000. - - Tweak this only when porting to a new machine which does not - already have a defconfig. Changing it from the known correct - value on any of the known systems will only lead to disaster. - -config MEMORY_SIZE - hex "Physical memory size" - default "0x00400000" - help - This sets the default memory size assumed by your SH kernel. It can - be overridden as normal by the 'mem=' argument on the kernel command - line. If unsure, consult your board specifications or just leave it - as 0x00400000 which was the default value before this became - configurable. - config CF_ENABLER bool "Compact Flash Enabler support" - depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03 + depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03 ---help--- Compact Flash is a small, removable mass storage device introduced in 1994 originally as a PCMCIA device. If you say `Y' here, you @@ -294,7 +262,7 @@ config CF_AREA5 - "Area5" if CompactFlash is connected to Area 5 (0x14000000) - "Area6" if it is connected to Area 6 (0x18000000) - "Area6" will work for most boards. For ADX, select "Area5". + "Area6" will work for most boards. config CF_AREA6 bool "Area6" @@ -316,19 +284,6 @@ config CPU_LITTLE_ENDIAN endian byte order. These modes require different kernels. Say Y if your machine is little endian, N if it's a big endian machine. -# The SH7750 RTC module is disabled in the Dreamcast -config SH_RTC - bool - depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && \ - !SH_73180_SOLUTION_ENGINE && !SH_LANDISK && \ - !SH_R7780RP - default y - help - Selecting this option will allow the Linux kernel to emulate - PC's RTC. - - If unsure, say N. - config SH_FPU bool "FPU support" depends on !CPU_SH3 @@ -339,14 +294,22 @@ config SH_FPU This option must be set in order to enable the FPU. +config SH_FPU_EMU + bool "FPU emulation support" + depends on !SH_FPU && EXPERIMENTAL + default n + help + Selecting this option will enable support for software FPU emulation. + Most SH-3 users will want to say Y here, whereas most SH-4 users will + want to say N. + config SH_DSP bool "DSP support" - depends on !CPU_SH4 - default y + default y if SH4AL_DSP || !CPU_SH4 + default n help Selecting this option will enable support for SH processors that - have DSP units (ie, SH2-DSP and SH3-DSP). It is safe to say Y here - by default, as the existance of the DSP will be probed at runtime. + have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). This option must be set in order to enable the DSP. @@ -373,6 +336,9 @@ config CPU_HAS_INTEVT config CPU_HAS_PINT_IRQ bool +config CPU_HAS_MASKREG_IRQ + bool + config CPU_HAS_INTC2_IRQ bool @@ -400,16 +366,19 @@ config SH_TMU endmenu -#source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" +source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" + +source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -#source "arch/sh/boards/renesas/rts7751r2d/Kconfig" +source "arch/sh/boards/renesas/r7780rp/Kconfig" config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 default "60000000" if CPU_SUBTYPE_SH7751 - default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760 - default "27000000" if CPU_SUBTYPE_SH73180 + default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ + CPU_SUBTYPE_SH7760 + default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 default "66000000" if CPU_SUBTYPE_SH4_202 help This option is used to specify the peripheral clock frequency. @@ -440,10 +409,8 @@ source "arch/sh/cchips/Kconfig" config HEARTBEAT bool "Heartbeat LED" - depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || \ - SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || \ - SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \ - SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \ + depends on SH_MPC1211 || SH_SH03 || \ + SH_BIGSUR || SOLUTION_ENGINE || \ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK help Use the power-on LED on your machine as a load meter. The exact @@ -459,6 +426,8 @@ config ISA_DMA_API menu "Kernel features" +source kernel/Kconfig.hz + config KEXEC bool "kexec system call (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -476,10 +445,6 @@ config KEXEC support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made. -config PREEMPT - bool "Preemptible Kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL - config SMP bool "Symmetric multi-processing support" ---help--- @@ -515,6 +480,8 @@ config NR_CPUS This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. +source "kernel/Kconfig.preempt" + config CPU_HAS_SR_RB bool "CPU has SR.RB" depends on CPU_SH3 || CPU_SH4 @@ -636,6 +603,16 @@ source "fs/Kconfig.binfmt" endmenu +menu "Power management options (EXPERIMENTAL)" +depends on EXPERIMENTAL + +source kernel/power/Kconfig + +config APM + bool "Advanced Power Management Emulation" + depends on PM +endmenu + source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8fb31ab2c02..48479e014da 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -30,8 +30,35 @@ config EARLY_PRINTK when the kernel may crash or hang before the serial console is initialised. If unsure, say N. +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. + +config DEBUG_STACK_USAGE + bool "Stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T and sysrq-P debug output. + + This option will slow down process creation somewhat. + +config 4KSTACKS + bool "Use 4Kb for kernel stacks instead of 8Kb" + depends on DEBUG_KERNEL + help + If you say Y here the kernel will use a 4Kb stacksize for the + kernel stack attached to each process/thread. This facilitates + running more threads on a system and also reduces the pressure + on the VM subsystem for higher order allocations. This option + will also use IRQ stacks to compensate for the reduced stackspace. + config KGDB bool "Include KGDB kernel debugger" + select FRAME_POINTER help Include in-kernel hooks for kgdb, the Linux kernel source level debugger. See <http://kgdb.sourceforge.net/> for more information. @@ -112,13 +139,4 @@ endchoice endmenu -config FRAME_POINTER - bool "Compile the kernel with frame pointers" - default y if KGDB - help - If you say Y here the resulting kernel image will be slightly larger - and slower, but it will give very useful debugging information. - If you don't debug the kernel, you can say N, but we may not be able - to solve problems without frame pointers. - endmenu diff --git a/arch/sh/Makefile b/arch/sh/Makefile index e467a450662..26d62ff51a6 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -18,11 +18,13 @@ cflags-y := -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml isa-y := any +isa-$(CONFIG_SH_DSP) := sh isa-$(CONFIG_CPU_SH2) := sh2 +isa-$(CONFIG_CPU_SH2A) := sh2a isa-$(CONFIG_CPU_SH3) := sh3 isa-$(CONFIG_CPU_SH4) := sh4 isa-$(CONFIG_CPU_SH4A) := sh4a -isa-$(CONFIG_CPU_SH2A) := sh2a +isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp @@ -30,9 +32,11 @@ ifndef CONFIG_MMU isa-y := $(isa-y)-nommu endif +ifndef CONFIG_SH_DSP ifndef CONFIG_SH_FPU isa-y := $(isa-y)-nofpu endif +endif cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) @@ -79,24 +83,19 @@ head-y := arch/sh/kernel/head.o arch/sh/kernel/init_task.o LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ +core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ # Boards machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 +machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 -machdir-$(CONFIG_SH_STB1_HARP) := harp -machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_CQREEK) := cqreek -machdir-$(CONFIG_SH_DMIDA) := dmida machdir-$(CONFIG_SH_EC3104) := ec3104 machdir-$(CONFIG_SH_SATURN) := saturn machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_CAT68701) := cat68701 machdir-$(CONFIG_SH_BIGSUR) := bigsur -machdir-$(CONFIG_SH_SH2000) := sh2000 -machdir-$(CONFIG_SH_ADX) := adx machdir-$(CONFIG_SH_MPC1211) := mpc1211 machdir-$(CONFIG_SH_SH03) := sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear @@ -104,16 +103,16 @@ machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705 +machdir-$(CONFIG_SH_R7780RP) := renesas/r7780rp +machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev +machdir-$(CONFIG_SH_LANDISK) := landisk +machdir-$(CONFIG_SH_TITAN) := titan +machdir-$(CONFIG_SH_SHMIN) := shmin machdir-$(CONFIG_SH_UNKNOWN) := unknown incdir-y := $(notdir $(machdir-y)) - -incdir-$(CONFIG_SH_SOLUTION_ENGINE) := se -incdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se7751 -incdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se7300 -incdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se73180 -incdir-$(CONFIG_SH_HP600) := hp6xx +incdir-$(CONFIG_SH_HP6XX) := hp6xx ifneq ($(machdir-y),) core-y += arch/sh/boards/$(machdir-y)/ @@ -137,17 +136,14 @@ boot := arch/sh/boot CPPFLAGS_vmlinux.lds := -traditional -ifneq ($(KBUILD_SRC),) incdir-prefix := $(srctree)/include/asm-sh/ -else -incdir-prefix := -endif # Update machine arch and proc symlinks if something which affects # them changed. We use .arch and .mach to indicate when they were # updated last, otherwise make uses the target directory mtime. -include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/auto.conf +include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ + include/config/auto.conf FORCE @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu @@ -157,7 +153,8 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/auto.conf # don't, just reference the parent directory so the semantics are # kept roughly the same. -include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/auto.conf +include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ + include/config/auto.conf FORCE @echo -n ' SYMLINK include/asm-sh/mach -> ' $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \ @@ -170,7 +167,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/auto.conf fi @touch $@ -archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach +archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools PHONY += maketools FORCE maketools: include/linux/version.h FORCE @@ -191,4 +188,3 @@ CLEAN_FILES += include/asm-sh/machtypes.h define archhelp @echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)' endef - diff --git a/arch/sh/boards/adx/Makefile b/arch/sh/boards/adx/Makefile deleted file mode 100644 index 5b1c531b399..00000000000 --- a/arch/sh/boards/adx/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for ADX boards -# - -obj-y := setup.o irq.o irq_maskreq.o - diff --git a/arch/sh/boards/adx/irq.c b/arch/sh/boards/adx/irq.c deleted file mode 100644 index c6ca409dff9..00000000000 --- a/arch/sh/boards/adx/irq.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/sh/boards/adx/irq.c - * - * Copyright (C) 2001 A&D Co., Ltd. - * - * I/O routine and setup routines for A&D ADX Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <asm/irq.h> - -void init_adx_IRQ(void) -{ - int i; - -/* printk("init_adx_IRQ()\n");*/ - /* setup irq_mask_register */ - irq_mask_register = (unsigned short *)0xa6000008; - - /* cover all external interrupt area by maskreg_irq_type - * (Actually, irq15 doesn't exist) - */ - for (i = 0; i < 16; i++) { - make_maskreg_irq(i); - disable_irq(i); - } -} diff --git a/arch/sh/boards/adx/setup.c b/arch/sh/boards/adx/setup.c deleted file mode 100644 index 4938d959234..00000000000 --- a/arch/sh/boards/adx/setup.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/arch/sh/board/adx/setup.c - * - * Copyright (C) 2001 A&D Co., Ltd. - * - * I/O routine and setup routines for A&D ADX Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <asm/machvec.h> -#include <linux/module.h> - -extern void init_adx_IRQ(void); -extern void *cf_io_base; - -const char *get_system_type(void) -{ - return "A&D ADX"; -} - -unsigned long adx_isa_port2addr(unsigned long offset) -{ - /* CompactFlash (IDE) */ - if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset == 0x3f6)) { - return (unsigned long)cf_io_base + offset; - } - - /* eth0 */ - if ((offset >= 0x300) && (offset <= 0x30f)) { - return 0xa5000000 + offset; /* COMM BOARD (AREA1) */ - } - - return offset + 0xb0000000; /* IOBUS (AREA 4)*/ -} - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_adx __initmv = { - .mv_nr_irqs = 48, - .mv_isa_port2addr = adx_isa_port2addr, - .mv_init_irq = init_adx_IRQ, -}; -ALIAS_MV(adx) - -int __init platform_setup(void) -{ - /* Nothing to see here .. */ - return 0; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c index ac946a2201c..1ab04da3638 100644 --- a/arch/sh/boards/bigsur/irq.c +++ b/arch/sh/boards/bigsur/irq.c @@ -19,6 +19,7 @@ * IRQ functions for a Hitachi Big Sur Evaluation Board. * */ +#undef DEBUG #include <linux/sched.h> #include <linux/module.h> @@ -41,10 +42,8 @@ #undef BIGSUR_DEBUG #ifdef BIGSUR_DEBUG -#define DPRINTK(args...) printk(args) #define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) #else -#define DPRINTK(args...) #define DIPRINTK(n, args...) #endif /* BIGSUR_DEBUG */ @@ -60,45 +59,39 @@ extern int hd64465_irq_demux(int irq); /* Level 1 IRQ routines */ static void disable_bigsur_l1irq(unsigned int irq) { - unsigned long flags; unsigned char mask; unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - DPRINTK("Disable L1 IRQ %d\n", irq); + pr_debug("Disable L1 IRQ %d\n", irq); DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", mask_port, bit); - local_irq_save(flags); /* Disable IRQ - set mask bit */ mask = inb(mask_port) | bit; outb(mask, mask_port); - local_irq_restore(flags); return; } - DPRINTK("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); + pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); } static void enable_bigsur_l1irq(unsigned int irq) { - unsigned long flags; unsigned char mask; unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - DPRINTK("Enable L1 IRQ %d\n", irq); + pr_debug("Enable L1 IRQ %d\n", irq); DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", mask_port, bit); - local_irq_save(flags); /* Enable L1 IRQ - clear mask bit */ mask = inb(mask_port) & ~bit; outb(mask, mask_port); - local_irq_restore(flags); return; } - DPRINTK("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); + pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); } @@ -126,51 +119,45 @@ static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; /* Level 2 IRQ routines */ static void disable_bigsur_l2irq(unsigned int irq) { - unsigned long flags; unsigned char mask; unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - DPRINTK("Disable L2 IRQ %d\n", irq); + if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { + pr_debug("Disable L2 IRQ %d\n", irq); DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", mask_port, bit); - local_irq_save(flags); /* Disable L2 IRQ - set mask bit */ mask = inb(mask_port) | bit; outb(mask, mask_port); - local_irq_restore(flags); return; } - DPRINTK("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); + pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); } static void enable_bigsur_l2irq(unsigned int irq) { - unsigned long flags; unsigned char mask; unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - DPRINTK("Enable L2 IRQ %d\n", irq); + if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { + pr_debug("Enable L2 IRQ %d\n", irq); DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", mask_port, bit); - local_irq_save(flags); /* Enable L2 IRQ - clear mask bit */ mask = inb(mask_port) & ~bit; outb(mask, mask_port); - local_irq_restore(flags); return; } - DPRINTK("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); + pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); } static void mask_and_ack_bigsur(unsigned int irq) { - DPRINTK("mask_and_ack_bigsur IRQ %d\n", irq); + pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) disable_bigsur_l1irq(irq); else @@ -179,7 +166,7 @@ static void mask_and_ack_bigsur(unsigned int irq) static void end_bigsur_irq(unsigned int irq) { - DPRINTK("end_bigsur_irq IRQ %d\n", irq); + pr_debug("end_bigsur_irq IRQ %d\n", irq); if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) enable_bigsur_l1irq(irq); @@ -193,7 +180,7 @@ static unsigned int startup_bigsur_irq(unsigned int irq) u8 mask; u32 reg; - DPRINTK("startup_bigsur_irq IRQ %d\n", irq); + pr_debug("startup_bigsur_irq IRQ %d\n", irq); if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { /* Enable the L1 IRQ */ @@ -218,7 +205,7 @@ static unsigned int startup_bigsur_irq(unsigned int irq) static void shutdown_bigsur_irq(unsigned int irq) { - DPRINTK("shutdown_bigsur_irq IRQ %d\n", irq); + pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) disable_bigsur_l1irq(irq); else @@ -260,7 +247,7 @@ static void make_bigsur_l1isr(unsigned int irq) { disable_bigsur_l1irq(irq); return; } - DPRINTK("make_bigsur_l1isr: bad irq, %d\n", irq); + pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); return; } @@ -277,7 +264,7 @@ static void make_bigsur_l2isr(unsigned int irq) { disable_bigsur_l2irq(irq); return; } - DPRINTK("make_bigsur_l2isr: bad irq, %d\n", irq); + pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); return; } diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c index dfeede9da50..9711c20fc9e 100644 --- a/arch/sh/boards/bigsur/setup.c +++ b/arch/sh/boards/bigsur/setup.c @@ -41,31 +41,7 @@ // Big Sur Init Routines /*===========================================================*/ -const char *get_system_type(void) -{ - return "Big Sur"; -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_nr_irqs = NR_IRQS, // Defined in <asm/irq.h> - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) - -int __init platform_setup(void) +static void __init bigsur_setup(char **cmdline_p) { /* Mask all 2nd level IRQ's */ outb(-1,BIGSUR_IMR0); @@ -89,7 +65,24 @@ int __init platform_setup(void) outw(1, BIGSUR_ETHR+0xe); /* set the IO port to BIGSUR_ETHER_IOPORT */ outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); - - return 0; } +/* + * The Machine Vector + */ +extern void heartbeat_bigsur(void); +extern void init_bigsur_IRQ(void); + +struct sh_machine_vector mv_bigsur __initmv = { + .mv_name = "Big Sur", + .mv_setup = bigsur_setup, + + .mv_isa_port2addr = bigsur_isa_port2addr, + .mv_irq_demux = bigsur_irq_demux, + + .mv_init_irq = init_bigsur_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_bigsur, +#endif +}; +ALIAS_MV(bigsur) diff --git a/arch/sh/boards/cat68701/Makefile b/arch/sh/boards/cat68701/Makefile deleted file mode 100644 index 52c1de0a6df..00000000000 --- a/arch/sh/boards/cat68701/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the CAT-68701 specific parts of the kernel -# - -obj-y := setup.o irq.o - diff --git a/arch/sh/boards/cat68701/irq.c b/arch/sh/boards/cat68701/irq.c deleted file mode 100644 index f9a6d185fb8..00000000000 --- a/arch/sh/boards/cat68701/irq.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/arch/sh/boards/cat68701/irq.c - * - * Copyright (C) 2000 Niibe Yutaka - * 2001 Yutaro Ebihara - * - * Setup routines for A-ONE Corp CAT-68701 SH7708 Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <asm/irq.h> - -int cat68701_irq_demux(int irq) -{ - if(irq==13) return 14; - if(irq==7) return 10; - return irq; -} - -void init_cat68701_IRQ() -{ - make_imask_irq(10); - make_imask_irq(14); -} diff --git a/arch/sh/boards/cat68701/setup.c b/arch/sh/boards/cat68701/setup.c deleted file mode 100644 index 90e5175df22..00000000000 --- a/arch/sh/boards/cat68701/setup.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * linux/arch/sh/boards/cat68701/setup.c - * - * Copyright (C) 2000 Niibe Yutaka - * 2001 Yutaro Ebihara - * - * Setup routines for A-ONE Corp CAT-68701 SH7708 Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <asm/io.h> -#include <asm/machvec.h> -#include <asm/mach/io.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> - -const char *get_system_type(void) -{ - return "CAT-68701"; -} - -#ifdef CONFIG_HEARTBEAT -void heartbeat_cat68701() -{ - static unsigned int cnt = 0, period = 0 , bit = 0; - cnt += 1; - if (cnt < period) { - return; - } - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if(bit){ bit=0; }else{ bit=1; } - outw(bit<<15,0x3fe); -} -#endif /* CONFIG_HEARTBEAT */ - -unsigned long cat68701_isa_port2addr(unsigned long offset) -{ - /* CompactFlash (IDE) */ - if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset==0x3f6)) - return 0xba000000 + offset; - - /* INPUT PORT */ - if ((offset >= 0x3fc) && (offset <= 0x3fd)) - return 0xb4007000 + offset; - - /* OUTPUT PORT */ - if ((offset >= 0x3fe) && (offset <= 0x3ff)) - return 0xb4007400 + offset; - - return offset + 0xb4000000; /* other I/O (EREA 5)*/ -} - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_cat68701 __initmv = { - .mv_nr_irqs = 32, - .mv_isa_port2addr = cat68701_isa_port2addr, - .mv_irq_demux = cat68701_irq_demux, - - .mv_init_irq = init_cat68701_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_cat68701, -#endif -}; -ALIAS_MV(cat68701) - -int __init platform_setup(void) -{ - /* dummy read erea5 (CS8900A) */ -} - diff --git a/arch/sh/boards/cqreek/Makefile b/arch/sh/boards/cqreek/Makefile deleted file mode 100644 index 1a788a85eba..00000000000 --- a/arch/sh/boards/cqreek/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the CqREEK specific parts of the kernel -# - -obj-y := setup.o irq.o - diff --git a/arch/sh/boards/cqreek/irq.c b/arch/sh/boards/cqreek/irq.c deleted file mode 100644 index 2955adc5231..00000000000 --- a/arch/sh/boards/cqreek/irq.c +++ /dev/null @@ -1,128 +0,0 @@ -/* $Id: irq.c,v 1.1.2.4 2002/11/04 20:33:56 lethal Exp $ - * - * arch/sh/boards/cqreek/irq.c - * - * Copyright (C) 2000 Niibe Yutaka - * - * CqREEK IDE/ISA Bridge Support. - * - */ - -#include <linux/irq.h> -#include <linux/init.h> - -#include <asm/cqreek/cqreek.h> -#include <asm/io.h> -#include <asm/io_generic.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/machvec_init.h> -#include <asm/rtc.h> - -struct cqreek_irq_data { - unsigned short mask_port; /* Port of Interrupt Mask Register */ - unsigned short stat_port; /* Port of Interrupt Status Register */ - unsigned short bit; /* Value of the bit */ -}; -static struct cqreek_irq_data cqreek_irq_data[NR_IRQS]; - -static void disable_cqreek_irq(unsigned int irq) -{ - unsigned long flags; - unsigned short mask; - unsigned short mask_port = cqreek_irq_data[irq].mask_port; - unsigned short bit = cqreek_irq_data[irq].bit; - - local_irq_save(flags); - /* Disable IRQ */ - mask = inw(mask_port) & ~bit; - outw_p(mask, mask_port); - local_irq_restore(flags); -} - -static void enable_cqreek_irq(unsigned int irq) -{ - unsigned long flags; - unsigned short mask; - unsigned short mask_port = cqreek_irq_data[irq].mask_port; - unsigned short bit = cqreek_irq_data[irq].bit; - - local_irq_save(flags); - /* Enable IRQ */ - mask = inw(mask_port) | bit; - outw_p(mask, mask_port); - local_irq_restore(flags); -} - -static void mask_and_ack_cqreek(unsigned int irq) -{ - unsigned short stat_port = cqreek_irq_data[irq].stat_port; - unsigned short bit = cqreek_irq_data[irq].bit; - - disable_cqreek_irq(irq); - /* Clear IRQ (it might be edge IRQ) */ - inw(stat_port); - outw_p(bit, stat_port); -} - -static void end_cqreek_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_cqreek_irq(irq); -} - -static unsigned int startup_cqreek_irq(unsigned int irq) -{ - enable_cqreek_irq(irq); - return 0; -} - -static void shutdown_cqreek_irq(unsigned int irq) -{ - disable_cqreek_irq(irq); -} - -static struct hw_interrupt_type cqreek_irq_type = { - .typename = "CqREEK-IRQ", - .startup = startup_cqreek_irq, - .shutdown = shutdown_cqreek_irq, - .enable = enable_cqreek_irq, - .disable = disable_cqreek_irq, - .ack = mask_and_ack_cqreek, - .end = end_cqreek_irq -}; - -int cqreek_has_ide, cqreek_has_isa; - -/* XXX: This is just for test for my NE2000 ISA board - What we really need is virtualized IRQ and demultiplexer like HP600 port */ -void __init init_cqreek_IRQ(void) -{ - if (cqreek_has_ide) { - cqreek_irq_data[14].mask_port = BRIDGE_IDE_INTR_MASK; - cqreek_irq_data[14].stat_port = BRIDGE_IDE_INTR_STAT; - cqreek_irq_data[14].bit = 1; - - irq_desc[14].chip = &cqreek_irq_type; - irq_desc[14].status = IRQ_DISABLED; - irq_desc[14].action = 0; - irq_desc[14].depth = 1; - - disable_cqreek_irq(14); - } - - if (cqreek_has_isa) { - cqreek_irq_data[10].mask_port = BRIDGE_ISA_INTR_MASK; - cqreek_irq_data[10].stat_port = BRIDGE_ISA_INTR_STAT; - cqreek_irq_data[10].bit = (1 << 10); - - /* XXX: Err... we may need demultiplexer for ISA irq... */ - irq_desc[10].chip = &cqreek_irq_type; - irq_desc[10].status = IRQ_DISABLED; - irq_desc[10].action = 0; - irq_desc[10].depth = 1; - - disable_cqreek_irq(10); - } -} - diff --git a/arch/sh/boards/cqreek/setup.c b/arch/sh/boards/cqreek/setup.c deleted file mode 100644 index eff4ed93599..00000000000 --- a/arch/sh/boards/cqreek/setup.c +++ /dev/null @@ -1,100 +0,0 @@ -/* $Id: setup.c,v 1.5 2003/08/04 01:51:58 lethal Exp $ - * - * arch/sh/kernel/setup_cqreek.c - * - * Copyright (C) 2000 Niibe Yutaka - * - * CqREEK IDE/ISA Bridge Support. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/mach/cqreek.h> -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/io_generic.h> -#include <asm/irq.h> -#include <asm/rtc.h> - -#define IDE_OFFSET 0xA4000000UL -#define ISA_OFFSET 0xA4A00000UL - -const char *get_system_type(void) -{ - return "CqREEK"; -} - -static unsigned long cqreek_port2addr(unsigned long port) -{ - if (0x0000<=port && port<=0x0040) - return IDE_OFFSET + port; - if ((0x01f0<=port && port<=0x01f7) || port == 0x03f6) - return IDE_OFFSET + port; - - return ISA_OFFSET + port; -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_cqreek __initmv = { -#if defined(CONFIG_CPU_SH4) - .mv_nr_irqs = 48, -#elif defined(CONFIG_CPU_SUBTYPE_SH7708) - .mv_nr_irqs = 32, -#elif defined(CONFIG_CPU_SUBTYPE_SH7709) - .mv_nr_irqs = 61, -#endif - - .mv_init_irq = init_cqreek_IRQ, - - .mv_isa_port2addr = cqreek_port2addr, -}; -ALIAS_MV(cqreek) - -/* - * Initialize the board - */ -void __init platform_setup(void) -{ - int i; -/* udelay is not available at setup time yet... */ -#define DELAY() do {for (i=0; i<10000; i++) ctrl_inw(0xa0000000);} while(0) - - if ((inw (BRIDGE_FEATURE) & 1)) { /* We have IDE interface */ - outw_p(0, BRIDGE_IDE_INTR_LVL); - outw_p(0, BRIDGE_IDE_INTR_MASK); - - outw_p(0, BRIDGE_IDE_CTRL); - DELAY(); - - outw_p(0x8000, BRIDGE_IDE_CTRL); - DELAY(); - - outw_p(0xffff, BRIDGE_IDE_INTR_STAT); /* Clear interrupt status */ - outw_p(0x0f-14, BRIDGE_IDE_INTR_LVL); /* Use 14 IPR */ - outw_p(1, BRIDGE_IDE_INTR_MASK); /* Enable interrupt */ - cqreek_has_ide=1; - } - - if ((inw (BRIDGE_FEATURE) & 2)) { /* We have ISA interface */ - outw_p(0, BRIDGE_ISA_INTR_LVL); - outw_p(0, BRIDGE_ISA_INTR_MASK); - - outw_p(0, BRIDGE_ISA_CTRL); - DELAY(); - outw_p(0x8000, BRIDGE_ISA_CTRL); - DELAY(); - - outw_p(0xffff, BRIDGE_ISA_INTR_STAT); /* Clear interrupt status */ - outw_p(0x0f-10, BRIDGE_ISA_INTR_LVL); /* Use 10 IPR */ - outw_p(0xfff8, BRIDGE_ISA_INTR_MASK); /* Enable interrupt */ - cqreek_has_isa=1; - } - - printk(KERN_INFO "CqREEK Setup (IDE=%d, ISA=%d)...done\n", cqreek_has_ide, cqreek_has_isa); -} - diff --git a/arch/sh/boards/dmida/Makefile b/arch/sh/boards/dmida/Makefile deleted file mode 100644 index 75999aa0a2d..00000000000 --- a/arch/sh/boards/dmida/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the DataMyte Industrial Digital Assistant(tm) specific parts -# of the kernel -# - -obj-y := mach.o - diff --git a/arch/sh/boards/dmida/mach.c b/arch/sh/boards/dmida/mach.c deleted file mode 100644 index d03a25f989c..00000000000 --- a/arch/sh/boards/dmida/mach.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * linux/arch/sh/boards/dmida/mach.c - * - * by Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc - * - * Derived from mach_hp600.c, which bore the message: - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the DataMyte Industrial Digital Assistant(tm). - * See http://www.dmida.com - * - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/irq.h> - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_dmida __initmv = { - .mv_nr_irqs = HD64465_IRQ_BASE+HD64465_IRQ_NUM, - - .mv_inb = hd64465_inb, - .mv_inw = hd64465_inw, - .mv_inl = hd64465_inl, - .mv_outb = hd64465_outb, - .mv_outw = hd64465_outw, - .mv_outl = hd64465_outl, - - .mv_inb_p = hd64465_inb_p, - .mv_inw_p = hd64465_inw, - .mv_inl_p = hd64465_inl, - .mv_outb_p = hd64465_outb_p, - .mv_outw_p = hd64465_outw, - .mv_outl_p = hd64465_outl, - - .mv_insb = hd64465_insb, - .mv_insw = hd64465_insw, - .mv_insl = hd64465_insl, - .mv_outsb = hd64465_outsb, - .mv_outsw = hd64465_outsw, - .mv_outsl = hd64465_outsl, - - .mv_irq_demux = hd64465_irq_demux, -}; -ALIAS_MV(dmida) - diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c index b10a6b11c03..5bf01f86c20 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/dreamcast/irq.c @@ -10,7 +10,6 @@ */ #include <linux/irq.h> - #include <asm/io.h> #include <asm/irq.h> #include <asm/dreamcast/sysasic.h> @@ -26,10 +25,10 @@ event. There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event - types can be found in include/asm-sh/dc_sysasic.h. There are three groups - of EMRs that parallel the ESRs. Each EMR group corresponds to an IRQ, so - 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 triggers - IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. + types can be found in include/asm-sh/dreamcast/sysasic.h. There are three + groups of EMRs that parallel the ESRs. Each EMR group corresponds to an + IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 + triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. In the kernel, these events are mapped to virtual IRQs so that drivers can respond to them as they would a normal interrupt. In order to keep this @@ -57,29 +56,23 @@ /* Disable the hardware event by masking its bit in its EMR */ static inline void disable_systemasic_irq(unsigned int irq) { - unsigned long flags; __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); __u32 mask; - local_irq_save(flags); mask = inl(emr); mask &= ~(1 << EVENT_BIT(irq)); outl(mask, emr); - local_irq_restore(flags); } /* Enable the hardware event by setting its bit in its EMR */ static inline void enable_systemasic_irq(unsigned int irq) { - unsigned long flags; __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); __u32 mask; - local_irq_save(flags); mask = inl(emr); mask |= (1 << EVENT_BIT(irq)); outl(mask, emr); - local_irq_restore(flags); } /* Acknowledge a hardware event by writing its bit back to its ESR */ diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c index 379de162913..b3a876a3b85 100644 --- a/arch/sh/boards/dreamcast/rtc.c +++ b/arch/sh/boards/dreamcast/rtc.c @@ -1,4 +1,5 @@ -/* arch/sh/kernel/rtc-aica.c +/* + * arch/sh/boards/dreamcast/rtc.c * * Dreamcast AICA RTC routines. * @@ -10,15 +11,12 @@ */ #include <linux/time.h> - +#include <asm/rtc.h> #include <asm/io.h> -extern void (*rtc_get_time)(struct timespec *); -extern int (*rtc_set_time)(const time_t); - /* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in - seconds to get the standard Unix Epoch when getting the time, and add 20 - years when setting the time. */ + seconds) to get the standard Unix Epoch when getting the time, and add + 20 years when setting the time. */ #define TWENTY_YEARS ((20 * 365LU + 5) * 86400) /* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit @@ -32,7 +30,8 @@ extern int (*rtc_set_time)(const time_t); * * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. */ -void aica_rtc_gettimeofday(struct timespec *ts) { +void aica_rtc_gettimeofday(struct timespec *ts) +{ unsigned long val1, val2; do { @@ -55,7 +54,8 @@ void aica_rtc_gettimeofday(struct timespec *ts) { * * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. */ -int aica_rtc_settimeofday(const time_t secs) { +int aica_rtc_settimeofday(const time_t secs) +{ unsigned long val1, val2; unsigned long adj = secs + TWENTY_YEARS; @@ -75,7 +75,7 @@ int aica_rtc_settimeofday(const time_t secs) { void aica_time_init(void) { - rtc_get_time = aica_rtc_gettimeofday; - rtc_set_time = aica_rtc_settimeofday; + rtc_sh_get_time = aica_rtc_gettimeofday; + rtc_sh_set_time = aica_rtc_settimeofday; } diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 0027b80a234..f13017eeeb2 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -22,41 +22,21 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/device.h> - #include <asm/io.h> #include <asm/irq.h> +#include <asm/rtc.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> #include <asm/mach/sysasic.h> extern struct hw_interrupt_type systemasic_int; -/* XXX: Move this into it's proper header. */ -extern void (*board_time_init)(void); extern void aica_time_init(void); extern int gapspci_init(void); extern int systemasic_irq_demux(int); -void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, int); +void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t); -const char *get_system_type(void) -{ - return "Sega Dreamcast"; -} - -struct sh_machine_vector mv_dreamcast __initmv = { - .mv_nr_irqs = NR_IRQS, - - .mv_irq_demux = systemasic_irq_demux, - -#ifdef CONFIG_PCI - .mv_consistent_alloc = dreamcast_consistent_alloc, - .mv_consistent_free = dreamcast_consistent_free, -#endif -}; -ALIAS_MV(dreamcast) - -int __init platform_setup(void) +static void __init dreamcast_setup(char **cmdline_p) { int i; @@ -78,6 +58,16 @@ int __init platform_setup(void) if (gapspci_init() < 0) printk(KERN_WARNING "GAPSPCI was not detected.\n"); #endif - - return 0; } + +struct sh_machine_vector mv_dreamcast __initmv = { + .mv_name = "Sega Dreamcast", + .mv_setup = dreamcast_setup, + .mv_irq_demux = systemasic_irq_demux, + +#ifdef CONFIG_PCI + .mv_consistent_alloc = dreamcast_consistent_alloc, + .mv_consistent_free = dreamcast_consistent_free, +#endif +}; +ALIAS_MV(dreamcast) diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c index 4b3ef16a0e9..902bc975a13 100644 --- a/arch/sh/boards/ec3104/setup.c +++ b/arch/sh/boards/ec3104/setup.c @@ -21,22 +21,36 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> - #include <asm/io.h> #include <asm/irq.h> #include <asm/machvec.h> #include <asm/mach/ec3104.h> -const char *get_system_type(void) +static void __init ec3104_setup(char **cmdline_p) { - return "EC3104"; + char str[8]; + int i; + + for (i=0; i<8; i++) + str[i] = ctrl_readb(EC3104_BASE + i); + + for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) + irq_desc[i].handler = &ec3104_int; + + printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", + str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); + + /* mask all interrupts. this should have been done by the boot + * loader for us but we want to be sure ... */ + ctrl_writel(0xffffffff, EC3104_IMR); } /* * The Machine Vector */ - struct sh_machine_vector mv_ec3104 __initmv = { + .mv_name = "EC3104", + .mv_setup = ec3104_setup, .mv_nr_irqs = 96, .mv_inb = ec3104_inb, @@ -48,31 +62,4 @@ struct sh_machine_vector mv_ec3104 __initmv = { .mv_irq_demux = ec3104_irq_demux, }; - ALIAS_MV(ec3104) - -int __init platform_setup(void) -{ - char str[8]; - int i; - - if (0) - return 0; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].chip = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); - - return 0; -} - diff --git a/arch/sh/boards/harp/Makefile b/arch/sh/boards/harp/Makefile deleted file mode 100644 index eb753d31812..00000000000 --- a/arch/sh/boards/harp/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for STMicroelectronics board specific parts of the kernel -# - -obj-y := irq.o setup.o mach.o led.o - -obj-$(CONFIG_PCI) += pcidma.o - diff --git a/arch/sh/boards/harp/irq.c b/arch/sh/boards/harp/irq.c deleted file mode 100644 index 96bb41c9fc5..00000000000 --- a/arch/sh/boards/harp/irq.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Looks after interrupts on the HARP board. - * - * Bases on the IPR irq system - */ - -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/harp/harp.h> - - -#define NUM_EXTERNAL_IRQS 16 - -// Early versions of the STB1 Overdrive required this nasty frig -//#define INVERT_INTMASK_WRITES - -static void enable_harp_irq(unsigned int irq); -static void disable_harp_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_harp_irq disable_harp_irq - -static void mask_and_ack_harp(unsigned int); -static void end_harp_irq(unsigned int irq); - -static unsigned int startup_harp_irq(unsigned int irq) -{ - enable_harp_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type harp_irq_type = { - .typename = "Harp-IRQ", - .startup = startup_harp_irq, - .shutdown = shutdown_harp_irq, - .enable = enable_harp_irq, - .disable = disable_harp_irq, - .ack = mask_and_ack_harp, - .end = end_harp_irq -}; - -static void disable_harp_irq(unsigned int irq) -{ - unsigned val, flags; - unsigned maskReg; - unsigned mask; - int pri; - - if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) - return; - - pri = 15 - irq; - - if (pri < 8) { - maskReg = EPLD_INTMASK0; - } else { - maskReg = EPLD_INTMASK1; - pri -= 8; - } - - local_irq_save(flags); - mask = ctrl_inl(maskReg); - mask &= (~(1 << pri)); -#if defined(INVERT_INTMASK_WRITES) - mask ^= 0xff; -#endif - ctrl_outl(mask, maskReg); - local_irq_restore(flags); -} - -static void enable_harp_irq(unsigned int irq) -{ - unsigned flags; - unsigned maskReg; - unsigned mask; - int pri; - - if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) - return; - - pri = 15 - irq; - - if (pri < 8) { - maskReg = EPLD_INTMASK0; - } else { - maskReg = EPLD_INTMASK1; - pri -= 8; - } - - local_irq_save(flags); - mask = ctrl_inl(maskReg); - - - mask |= (1 << pri); - -#if defined(INVERT_INTMASK_WRITES) - mask ^= 0xff; -#endif - ctrl_outl(mask, maskReg); - - local_irq_restore(flags); -} - -/* This functions sets the desired irq handler to be an overdrive type */ -static void __init make_harp_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &harp_irq_type; - disable_harp_irq(irq); -} - -static void mask_and_ack_harp(unsigned int irq) -{ - disable_harp_irq(irq); -} - -static void end_harp_irq(unsigned int irq) -{ - enable_harp_irq(irq); -} - -void __init init_harp_irq(void) -{ - int i; - -#if !defined(INVERT_INTMASK_WRITES) - // On the harp these are set to enable an interrupt - ctrl_outl(0x00, EPLD_INTMASK0); - ctrl_outl(0x00, EPLD_INTMASK1); -#else - // On the Overdrive the data is inverted before being stored in the reg - ctrl_outl(0xff, EPLD_INTMASK0); - ctrl_outl(0xff, EPLD_INTMASK1); -#endif - - for (i = 0; i < NUM_EXTERNAL_IRQS; i++) { - make_harp_irq(i); - } -} diff --git a/arch/sh/boards/harp/led.c b/arch/sh/boards/harp/led.c deleted file mode 100644 index aeb7b392b19..00000000000 --- a/arch/sh/boards/harp/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/sh/stboards/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains ST40STB1 HARP and compatible code. - */ - -#include <asm/io.h> -#include <asm/harp/harp.h> - -/* Harp: Flash LD10 (front pannel) connected to EPLD (IC8) */ -/* Overdrive: Flash LD1 (front panel) connected to EPLD (IC4) */ -/* Works for HARP and overdrive */ -static void mach_led(int position, int value) -{ - if (value) { - ctrl_outl(EPLD_LED_ON, EPLD_LED); - } else { - ctrl_outl(EPLD_LED_OFF, EPLD_LED); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* acts like an actual heart beat -- ie thump-thump-pause... */ -void heartbeat_harp(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; - dist = period / 4; - } -} -#endif diff --git a/arch/sh/boards/harp/mach.c b/arch/sh/boards/harp/mach.c deleted file mode 100644 index a946dd1674c..00000000000 --- a/arch/sh/boards/harp/mach.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * linux/arch/sh/boards/harp/mach.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the STMicroelectronics STB1 HARP and compatible boards - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> -#include <asm/hd64465/io.h> -#include <asm/hd64465/hd64465.h> - -void setup_harp(void); -void init_harp_irq(void); -void heartbeat_harp(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_harp __initmv = { - .mv_nr_irqs = 89 + HD64465_IRQ_NUM, - - .mv_inb = hd64465_inb, - .mv_inw = hd64465_inw, - .mv_inl = hd64465_inl, - .mv_outb = hd64465_outb, - .mv_outw = hd64465_outw, - .mv_outl = hd64465_outl, - - .mv_inb_p = hd64465_inb_p, - .mv_inw_p = hd64465_inw, - .mv_inl_p = hd64465_inl, - .mv_outb_p = hd64465_outb_p, - .mv_outw_p = hd64465_outw, - .mv_outl_p = hd64465_outl, - - .mv_insb = hd64465_insb, - .mv_insw = hd64465_insw, - .mv_insl = hd64465_insl, - .mv_outsb = hd64465_outsb, - .mv_outsw = hd64465_outsw, - .mv_outsl = hd64465_outsl, - - .mv_isa_port2addr = hd64465_isa_port2addr, - -#ifdef CONFIG_PCI - .mv_init_irq = init_harp_irq, -#endif -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_harp, -#endif -}; - -ALIAS_MV(harp) diff --git a/arch/sh/boards/harp/pcidma.c b/arch/sh/boards/harp/pcidma.c deleted file mode 100644 index 475311390fd..00000000000 --- a/arch/sh/boards/harp/pcidma.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Dynamic DMA mapping support. - */ - -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <asm/addrspace.h> - - -void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, - dma_addr_t * dma_handle) -{ - void *ret; - int gfp = GFP_ATOMIC; - - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - /* Is it neccessary to do the memset? */ - memset(ret, 0, size); - *dma_handle = virt_to_bus(ret); - } - /* We must flush the cache before we pass it on to the device */ - flush_cache_all(); - return P2SEGADDR(ret); -} - -void pci_free_consistent(struct pci_dev *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - unsigned long p1addr=P1SEGADDR((unsigned long)vaddr); - - free_pages(p1addr, get_order(size)); -} diff --git a/arch/sh/boards/harp/setup.c b/arch/sh/boards/harp/setup.c deleted file mode 100644 index 886e450ab63..00000000000 --- a/arch/sh/boards/harp/setup.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * arch/sh/stboard/setup.c - * - * Copyright (C) 2001 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * STMicroelectronics ST40STB1 HARP and compatible support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> -#include <asm/harp/harp.h> - -const char *get_system_type(void) -{ - return "STB1 Harp"; -} - -/* - * Initialize the board - */ -int __init platform_setup(void) -{ -#ifdef CONFIG_SH_STB1_HARP - unsigned long ic8_version, ic36_version; - - ic8_version = ctrl_inl(EPLD_REVID2); - ic36_version = ctrl_inl(EPLD_REVID1); - - printk("STMicroelectronics STB1 HARP initialisaton\n"); - printk("EPLD versions: IC8: %d.%02d, IC36: %d.%02d\n", - (ic8_version >> 4) & 0xf, ic8_version & 0xf, - (ic36_version >> 4) & 0xf, ic36_version & 0xf); -#elif defined(CONFIG_SH_STB1_OVERDRIVE) - unsigned long version; - - version = ctrl_inl(EPLD_REVID); - - printk("STMicroelectronics STB1 Overdrive initialisaton\n"); - printk("EPLD version: %d.%02d\n", - (version >> 4) & 0xf, version & 0xf); -#else -#error Undefined machine -#endif - - /* Currently all STB1 chips have problems with the sleep instruction, - * so disable it here. - */ - disable_hlt(); - - return 0; -} - -/* - * pcibios_map_platform_irq - * - * This is board specific and returns the IRQ for a given PCI device. - * It is used by the PCI code (arch/sh/kernel/st40_pci*) - * - */ - -#define HARP_PCI_IRQ 1 -#define HARP_BRIDGE_IRQ 2 -#define OVERDRIVE_SLOT0_IRQ 0 - - -int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { -#ifdef CONFIG_SH_STB1_HARP - case 2: /*This is the PCI slot on the */ - return HARP_PCI_IRQ; - case 1: /* this is the bridge */ - return HARP_BRIDGE_IRQ; -#elif defined(CONFIG_SH_STB1_OVERDRIVE) - case 1: - case 2: - case 3: - return slot - 1; -#else -#error Unknown board -#endif - default: - return -1; - } -} - diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile index 927fe0aa5df..ff1b7f5b4e9 100644 --- a/arch/sh/boards/hp6xx/Makefile +++ b/arch/sh/boards/hp6xx/Makefile @@ -2,5 +2,6 @@ # Makefile for the HP6xx specific parts of the kernel # -obj-y := mach.o setup.o - +obj-y := setup.o +obj-$(CONFIG_PM) += pm.o pm_wakeup.o +obj-$(CONFIG_APM) += hp6xx_apm.o diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c new file mode 100644 index 00000000000..ad0e712c29f --- /dev/null +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -0,0 +1,123 @@ +/* + * bios-less APM driver for hp680 + * + * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/apm_bios.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/io.h> +#include <asm/apm.h> +#include <asm/adc.h> +#include <asm/hp6xx/hp6xx.h> + +#define SH7709_PGDR 0xa400012c + +#define APM_CRITICAL 10 +#define APM_LOW 30 + +#define HP680_BATTERY_MAX 875 +#define HP680_BATTERY_MIN 600 +#define HP680_BATTERY_AC_ON 900 + +#define MODNAME "hp6x0_apm" + +static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length) +{ + u8 pgdr; + char *p; + int battery_status; + int battery_flag; + int ac_line_status; + int time_units = APM_BATTERY_LIFE_UNKNOWN; + + int battery = adc_single(ADC_CHANNEL_BATTERY); + int backup = adc_single(ADC_CHANNEL_BACKUP); + int charging = adc_single(ADC_CHANNEL_CHARGE); + int percentage; + + percentage = 100 * (battery - HP680_BATTERY_MIN) / + (HP680_BATTERY_MAX - HP680_BATTERY_MIN); + + ac_line_status = (battery > HP680_BATTERY_AC_ON) ? + APM_AC_ONLINE : APM_AC_OFFLINE; + + p = buf; + + pgdr = ctrl_inb(SH7709_PGDR); + if (pgdr & PGDR_MAIN_BATTERY_OUT) { + battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + battery_flag = 0x80; + percentage = -1; + } else if (charging < 8 ) { + battery_status = APM_BATTERY_STATUS_CHARGING; + battery_flag = 0x08; + ac_line_status = 0xff; + } else if (percentage <= APM_CRITICAL) { + battery_status = APM_BATTERY_STATUS_CRITICAL; + battery_flag = 0x04; + } else if (percentage <= APM_LOW) { + battery_status = APM_BATTERY_STATUS_LOW; + battery_flag = 0x02; + } else { + battery_status = APM_BATTERY_STATUS_HIGH; + battery_flag = 0x01; + } + + p += sprintf(p, "1.0 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", + APM_32_BIT_SUPPORT, + ac_line_status, + battery_status, + battery_flag, + percentage, + time_units, + "min"); + p += sprintf(p, "bat=%d backup=%d charge=%d\n", + battery, backup, charging); + + return p - buf; +} + +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + if (!apm_suspended) + apm_queue_event(APM_USER_SUSPEND); + + return IRQ_HANDLED; +} + +static int __init hp6x0_apm_init(void) +{ + int ret; + + ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, + SA_INTERRUPT, MODNAME, 0); + if (unlikely(ret < 0)) { + printk(KERN_ERR MODNAME ": IRQ %d request failed\n", + HP680_BTN_IRQ); + return ret; + } + + apm_get_info = hp6x0_apm_get_info; + + return ret; +} + +static void __exit hp6x0_apm_exit(void) +{ + free_irq(HP680_BTN_IRQ, 0); + apm_get_info = 0; +} + +module_init(hp6x0_apm_init); +module_exit(hp6x0_apm_exit); + +MODULE_AUTHOR("Adriy Skulysh"); +MODULE_DESCRIPTION("hp6xx Advanced Power Management"); +MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c new file mode 100644 index 00000000000..0e501bcbd7a --- /dev/null +++ b/arch/sh/boards/hp6xx/pm.c @@ -0,0 +1,88 @@ +/* + * hp6x0 Power Management Routines + * + * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <asm/io.h> +#include <asm/hd64461.h> +#include <asm/hp6xx/hp6xx.h> +#include <asm/cpu/dac.h> +#include <asm/pm.h> + +#define STBCR 0xffffff82 +#define STBCR2 0xffffff88 + +static int hp6x0_pm_enter(suspend_state_t state) +{ + u8 stbcr, stbcr2; +#ifdef CONFIG_HD64461_ENABLER + u8 scr; + u16 hd64461_stbcr; +#endif + + if (state != PM_SUSPEND_MEM) + return -EINVAL; + +#ifdef CONFIG_HD64461_ENABLER + outb(0, HD64461_PCC1CSCIER); + + scr = inb(HD64461_PCC1SCR); + scr |= HD64461_PCCSCR_VCC1; + outb(scr, HD64461_PCC1SCR); + + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr |= HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); +#endif + + ctrl_outb(0x1f, DACR); + + stbcr = ctrl_inb(STBCR); + ctrl_outb(0x01, STBCR); + + stbcr2 = ctrl_inb(STBCR2); + ctrl_outb(0x7f , STBCR2); + + outw(0xf07f, HD64461_SCPUCR); + + pm_enter(); + + outw(0, HD64461_SCPUCR); + ctrl_outb(stbcr, STBCR); + ctrl_outb(stbcr2, STBCR2); + +#ifdef CONFIG_HD64461_ENABLER + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr &= ~HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); + + outb(0x4c, HD64461_PCC1CSCIER); + outb(0x00, HD64461_PCC1CSCR); +#endif + + return 0; +} + +/* + * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. + */ +static struct pm_ops hp6x0_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .enter = hp6x0_pm_enter, +}; + +static int __init hp6x0_pm_init(void) +{ + pm_set_ops(&hp6x0_pm_ops); + return 0; +} + +late_initcall(hp6x0_pm_init); diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S new file mode 100644 index 00000000000..45e9bf0b911 --- /dev/null +++ b/arch/sh/boards/hp6xx/pm_wakeup.S @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <linux/linkage.h> +#include <asm/cpu/mmu_context.h> + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +/* + * Kernel mode register usage: + * k0 scratch + * k1 scratch + * k2 scratch (Exception code) + * k3 scratch (Return address) + * k4 scratch + * k5 reserved + * k6 Global Interrupt Mask (0--15 << 4) + * k7 CURRENT_THREAD_INFO (pointer to current thread info) + */ + +ENTRY(wakeup_start) +! clear STBY bit + mov #-126, k2 + and #127, k0 + mov.b k0, @k2 +! enable refresh + mov.l 5f, k1 + mov.w 6f, k0 + mov.w k0, @k1 +! jump to handler + mov.l 2f, k2 + mov.l 3f, k3 + mov.l @k2, k2 + + mov.l 4f, k1 + jmp @k1 + nop + + .align 2 +1: .long EXPEVT +2: .long INTEVT +3: .long ret_from_irq +4: .long handle_exception +5: .long 0xffffff68 +6: .word 0x0524 + +ENTRY(wakeup_end) + nop diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 71f315663cc..60ab17ad605 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -8,22 +8,22 @@ * * Setup code for an HP680 (internal peripherials only) */ - +#include <linux/types.h> #include <linux/init.h> -#include <asm/io.h> #include <asm/hd64461.h> +#include <asm/io.h> +#include <asm/irq.h> #include <asm/hp6xx/hp6xx.h> #include <asm/cpu/dac.h> -const char *get_system_type(void) -{ - return "HP6xx"; -} +#define SCPCR 0xa4000116 +#define SCPDR 0xa4000136 -int __init platform_setup(void) +static void __init hp6xx_setup(char **cmdline_p) { u8 v8; u16 v; + v = inw(HD64461_STBCR); v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | @@ -50,5 +50,51 @@ int __init platform_setup(void) v8 &= ~DACR_DAE; ctrl_outb(v8,DACR); - return 0; + v8 = ctrl_inb(SCPDR); + v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; + v8 &= ~SCPDR_TS_SCAN_ENABLE; + ctrl_outb(v8, SCPDR); + + v = ctrl_inw(SCPCR); + v &= ~SCPCR_TS_MASK; + v |= SCPCR_TS_ENABLE; + ctrl_outw(v, SCPCR); } + +/* + * XXX: This is stupid, we should have a generic machine vector for the cchips + * and just wrap the platform setup code in to this, as it's the only thing + * that ends up being different. + */ +struct sh_machine_vector mv_hp6xx __initmv = { + .mv_name = "hp6xx", + .mv_setup = hp6xx_setup, + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, + + .mv_inb = hd64461_inb, + .mv_inw = hd64461_inw, + .mv_inl = hd64461_inl, + .mv_outb = hd64461_outb, + .mv_outw = hd64461_outw, + .mv_outl = hd64461_outl, + + .mv_inb_p = hd64461_inb_p, + .mv_inw_p = hd64461_inw, + .mv_inl_p = hd64461_inl, + .mv_outb_p = hd64461_outb_p, + .mv_outw_p = hd64461_outw, + .mv_outl_p = hd64461_outl, + + .mv_insb = hd64461_insb, + .mv_insw = hd64461_insw, + .mv_insl = hd64461_insl, + .mv_outsb = hd64461_outsb, + .mv_outsw = hd64461_outsw, + .mv_outsl = hd64461_outsl, + + .mv_readw = hd64461_readw, + .mv_writew = hd64461_writew, + + .mv_irq_demux = hd64461_irq_demux, +}; +ALIAS_MV(hp6xx) diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile new file mode 100644 index 00000000000..89e4beb2ad4 --- /dev/null +++ b/arch/sh/boards/landisk/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for I-O DATA DEVICE, INC. "LANDISK Series" +# + +obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c new file mode 100644 index 00000000000..92498b4947d --- /dev/null +++ b/arch/sh/boards/landisk/io.c @@ -0,0 +1,250 @@ +/* + * arch/sh/boards/landisk/io.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for I-O Data Device, Inc. LANDISK. + * + * Initial version only to support LAN access; some + * placeholder code from io_landisk.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ +/* + * modifed by kogiidena + * 2005.03.03 + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/landisk/iodata_landisk.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +extern void *area5_io_base; /* Area 5 I/O Base address */ +extern void *area6_io_base; /* Area 6 I/O Base address */ + +static inline unsigned long port2adr(unsigned int port) +{ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + if (port == 0x3f6) + return ((unsigned long)area5_io_base + 0x2c); + else + return ((unsigned long)area5_io_base + PA_PIDE_OFFSET + + ((port - 0x1f0) << 1)); + else if ((0x170 <= port && port < 0x178) || port == 0x376) + if (port == 0x376) + return ((unsigned long)area6_io_base + 0x2c); + else + return ((unsigned long)area6_io_base + PA_SIDE_OFFSET + + ((port - 0x170) << 1)); + else + maybebadio((unsigned long)port); + + return port; +} + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +u8 landisk_inb(unsigned long port) +{ + if (PXSEG(port)) + return ctrl_inb(port); + else if (is_pci_ioaddr(port)) + return ctrl_inb(pci_ioaddr(port)); + + return ctrl_inw(port2adr(port)) & 0xff; +} + +u8 landisk_inb_p(unsigned long port) +{ + u8 v; + + if (PXSEG(port)) + v = ctrl_inb(port); + else if (is_pci_ioaddr(port)) + v = ctrl_inb(pci_ioaddr(port)); + else + v = ctrl_inw(port2adr(port)) & 0xff; + + ctrl_delay(); + + return v; +} + +u16 landisk_inw(unsigned long port) +{ + if (PXSEG(port)) + return ctrl_inw(port); + else if (is_pci_ioaddr(port)) + return ctrl_inw(pci_ioaddr(port)); + else + maybebadio(port); + + return 0; +} + +u32 landisk_inl(unsigned long port) +{ + if (PXSEG(port)) + return ctrl_inl(port); + else if (is_pci_ioaddr(port)) + return ctrl_inl(pci_ioaddr(port)); + else + maybebadio(port); + + return 0; +} + +void landisk_outb(u8 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outb(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); + else + ctrl_outw(value, port2adr(port)); +} + +void landisk_outb_p(u8 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outb(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); + else + ctrl_outw(value, port2adr(port)); + ctrl_delay(); +} + +void landisk_outw(u16 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outw(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outw(value, pci_ioaddr(port)); + else + maybebadio(port); +} + +void landisk_outl(u32 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outl(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outl(value, pci_ioaddr(port)); + else + maybebadio(port); +} + +void landisk_insb(unsigned long port, void *dst, unsigned long count) +{ + volatile u16 *p; + u8 *buf = dst; + + if (PXSEG(port)) { + while (count--) + *buf++ = *(volatile u8 *)port; + } else if (is_pci_ioaddr(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); + + while (count--) + *buf++ = *bp; + } else { + p = (volatile u16 *)port2adr(port); + while (count--) + *buf++ = *p & 0xff; + } +} + +void landisk_insw(unsigned long port, void *dst, unsigned long count) +{ + volatile u16 *p; + u16 *buf = dst; + + if (PXSEG(port)) + p = (volatile u16 *)port; + else if (is_pci_ioaddr(port)) + p = (volatile u16 *)pci_ioaddr(port); + else + p = (volatile u16 *)port2adr(port); + while (count--) + *buf++ = *p; +} + +void landisk_insl(unsigned long port, void *dst, unsigned long count) +{ + u32 *buf = dst; + + if (is_pci_ioaddr(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + + while (count--) + *buf++ = *p; + } else + maybebadio(port); +} + +void landisk_outsb(unsigned long port, const void *src, unsigned long count) +{ + volatile u16 *p; + const u8 *buf = src; + + if (PXSEG(port)) + while (count--) + ctrl_outb(*buf++, port); + else if (is_pci_ioaddr(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); + + while (count--) + *bp = *buf++; + } else { + p = (volatile u16 *)port2adr(port); + while (count--) + *p = *buf++; + } +} + +void landisk_outsw(unsigned long port, const void *src, unsigned long count) +{ + volatile u16 *p; + const u16 *buf = src; + + if (PXSEG(port)) + p = (volatile u16 *)port; + else if (is_pci_ioaddr(port)) + p = (volatile u16 *)pci_ioaddr(port); + else + p = (volatile u16 *)port2adr(port); + + while (count--) + *p = *buf++; +} + +void landisk_outsl(unsigned long port, const void *src, unsigned long count) +{ + const u32 *buf = src; + + if (is_pci_ioaddr(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + + while (count--) + *p = *buf++; + } else + maybebadio(port); +} + +void __iomem *landisk_ioport_map(unsigned long port, unsigned int size) +{ + if (PXSEG(port)) + return (void __iomem *)port; + else if (is_pci_ioaddr(port)) + return (void __iomem *)pci_ioaddr(port); + + return (void __iomem *)port2adr(port); +} diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c new file mode 100644 index 00000000000..a006d644322 --- /dev/null +++ b/arch/sh/boards/landisk/irq.c @@ -0,0 +1,99 @@ +/* + * arch/sh/boards/landisk/irq.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for I-O Data Device, Inc. LANDISK. + * + * Initial version only to support LAN access; some + * placeholder code from io_landisk.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ +/* + * modified by kogiidena + * 2005.03.03 + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/landisk/iodata_landisk.h> + +static void enable_landisk_irq(unsigned int irq); +static void disable_landisk_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_landisk_irq disable_landisk_irq + +static void ack_landisk_irq(unsigned int irq); +static void end_landisk_irq(unsigned int irq); + +static unsigned int startup_landisk_irq(unsigned int irq) +{ + enable_landisk_irq(irq); + return 0; /* never anything pending */ +} + +static void disable_landisk_irq(unsigned int irq) +{ + unsigned char val; + unsigned char mask = 0xff ^ (0x01 << (irq - 5)); + + /* Set the priority in IPR to 0 */ + val = ctrl_inb(PA_IMASK); + val &= mask; + ctrl_outb(val, PA_IMASK); +} + +static void enable_landisk_irq(unsigned int irq) +{ + unsigned char val; + unsigned char value = (0x01 << (irq - 5)); + + /* Set priority in IPR back to original value */ + val = ctrl_inb(PA_IMASK); + val |= value; + ctrl_outb(val, PA_IMASK); +} + +static void ack_landisk_irq(unsigned int irq) +{ + disable_landisk_irq(irq); +} + +static void end_landisk_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_landisk_irq(irq); +} + +static struct hw_interrupt_type landisk_irq_type = { + .typename = "LANDISK IRQ", + .startup = startup_landisk_irq, + .shutdown = shutdown_landisk_irq, + .enable = enable_landisk_irq, + .disable = disable_landisk_irq, + .ack = ack_landisk_irq, + .end = end_landisk_irq +}; + +static void make_landisk_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &landisk_irq_type; + disable_landisk_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_landisk_IRQ(void) +{ + int i; + + for (i = 5; i < 14; i++) + make_landisk_irq(i); +} diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c new file mode 100644 index 00000000000..e75cb578a28 --- /dev/null +++ b/arch/sh/boards/landisk/landisk_pwb.c @@ -0,0 +1,348 @@ +/* + * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch. + * + * This driver will also support the I-O DATA Device, Inc. LANDISK Board. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copylight (C) 2002 Atom Create Engineering Co., Ltd. + * + * LED control drive function added by kogiidena + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/major.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/landisk/iodata_landisk.h> + +#define SHUTDOWN_BTN_MINOR 1 /* Shutdown button device minor no. */ +#define LED_MINOR 21 /* LED minor no. */ +#define BTN_MINOR 22 /* BUTTON minor no. */ +#define GIO_MINOR 40 /* GIO minor no. */ + +static int openCnt; +static int openCntLED; +static int openCntGio; +static int openCntBtn; +static int landisk_btn; +static int landisk_btnctrlpid; +/* + * Functions prototypes + */ + +static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg); + +static int swdrv_open(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + filp->private_data = (void *)minor; + + if (minor == SHUTDOWN_BTN_MINOR) { + if (openCnt > 0) { + return -EALREADY; + } else { + openCnt++; + return 0; + } + } else if (minor == LED_MINOR) { + if (openCntLED > 0) { + return -EALREADY; + } else { + openCntLED++; + return 0; + } + } else if (minor == BTN_MINOR) { + if (openCntBtn > 0) { + return -EALREADY; + } else { + openCntBtn++; + return 0; + } + } else if (minor == GIO_MINOR) { + if (openCntGio > 0) { + return -EALREADY; + } else { + openCntGio++; + return 0; + } + } + return -ENOENT; + +} + +static int swdrv_close(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + if (minor == SHUTDOWN_BTN_MINOR) { + openCnt--; + } else if (minor == LED_MINOR) { + openCntLED--; + } else if (minor == BTN_MINOR) { + openCntBtn--; + } else if (minor == GIO_MINOR) { + openCntGio--; + } + return 0; +} + +static int swdrv_read(struct file *filp, char *buff, size_t count, + loff_t * ppos) +{ + int minor; + minor = (int)(filp->private_data); + + if (!access_ok(VERIFY_WRITE, (void *)buff, count)) + return -EFAULT; + + if (minor == SHUTDOWN_BTN_MINOR) { + if (landisk_btn & 0x10) { + put_user(1, buff); + return 1; + } else { + return 0; + } + } + return 0; +} + +static int swdrv_write(struct file *filp, const char *buff, size_t count, + loff_t * ppos) +{ + int minor; + minor = (int)(filp->private_data); + + if (minor == SHUTDOWN_BTN_MINOR) { + return count; + } + return count; +} + +static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS))); + disable_irq(IRQ_BUTTON); + disable_irq(IRQ_POWER); + ctrl_outb(0x00, PA_PWRINT_CLR); + + if (landisk_btnctrlpid != 0) { + kill_proc(landisk_btnctrlpid, SIGUSR1, 1); + landisk_btnctrlpid = 0; + } + + return IRQ_HANDLED; +} + +static struct file_operations swdrv_fops = { + .read = swdrv_read, /* read */ + .write = swdrv_write, /* write */ + .open = swdrv_open, /* open */ + .release = swdrv_close, /* release */ + .ioctl = gio_ioctl, /* ioctl */ + +}; + +static char banner[] __initdata = + KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n"; + +int __init swdrv_init(void) +{ + int error; + + printk("%s", banner); + + openCnt = 0; + openCntLED = 0; + openCntBtn = 0; + openCntGio = 0; + landisk_btn = 0; + landisk_btnctrlpid = 0; + + if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) { + printk(KERN_ERR + "Button, LED and GIO driver:Couldn't register driver, error=%d\n", + error); + return 1; + } + + if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) { + printk(KERN_ERR "Unable to get IRQ 11.\n"); + return 1; + } + if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) { + printk(KERN_ERR "Unable to get IRQ 12.\n"); + return 1; + } + ctrl_outb(0x00, PA_PWRINT_CLR); + + return 0; +} + +module_init(swdrv_init); + +/* + * gio driver + * + */ + +#include <asm/landisk/gio.h> + +static int gio_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + int minor; + unsigned int data, mask; + static unsigned int addr = 0; + + minor = (int)(filp->private_data); + + /* access control */ + if (minor == GIO_MINOR) { + ; + } else if (minor == LED_MINOR) { + if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) { + ; + } else { + return -EINVAL; + } + } else if (minor == BTN_MINOR) { + if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) { + ; + } else { + return -EINVAL; + } + } else { + return -EINVAL; + } + + if (cmd & 0x01) { /* write */ + if (copy_from_user(&data, (int *)arg, sizeof(int))) { + return -EFAULT; + } + } + + switch (cmd) { + case GIODRV_IOCSGIOSETADDR: /* addres set */ + addr = data; + break; + + case GIODRV_IOCSGIODATA1: /* write byte */ + ctrl_outb((unsigned char)(0x0ff & data), addr); + break; + + case GIODRV_IOCSGIODATA2: /* write word */ + if (addr & 0x01) { + return -EFAULT; + } + ctrl_outw((unsigned short int)(0x0ffff & data), addr); + break; + + case GIODRV_IOCSGIODATA4: /* write long */ + if (addr & 0x03) { + return -EFAULT; + } + ctrl_outl(data, addr); + break; + + case GIODRV_IOCGGIODATA1: /* read byte */ + data = ctrl_inb(addr); + break; + + case GIODRV_IOCGGIODATA2: /* read word */ + if (addr & 0x01) { + return -EFAULT; + } + data = ctrl_inw(addr); + break; + + case GIODRV_IOCGGIODATA4: /* read long */ + if (addr & 0x03) { + return -EFAULT; + } + data = ctrl_inl(addr); + break; + case GIODRV_IOCSGIO_LED: /* write */ + mask = ((data & 0x00ffffff) << 8) + | ((data & 0x0000ffff) << 16) + | ((data & 0x000000ff) << 24); + landisk_ledparam = data & (~mask); + if (landisk_arch == 0) { /* arch == landisk */ + landisk_ledparam &= 0x03030303; + mask = (~(landisk_ledparam >> 22)) & 0x000c; + landisk_ledparam |= mask; + } else { /* arch == usl-5p */ + mask = (landisk_ledparam >> 24) & 0x0001; + landisk_ledparam |= mask; + landisk_ledparam &= 0x007f7f7f; + } + landisk_ledparam |= 0x80; + break; + case GIODRV_IOCGGIO_LED: /* read */ + data = landisk_ledparam; + if (landisk_arch == 0) { /* arch == landisk */ + data &= 0x03030303; + } else { /* arch == usl-5p */ + ; + } + data &= (~0x080); + break; + case GIODRV_IOCSGIO_BUZZER: /* write */ + landisk_buzzerparam = data; + landisk_ledparam |= 0x80; + break; + case GIODRV_IOCGGIO_LANDISK: /* read */ + data = landisk_arch & 0x01; + break; + case GIODRV_IOCGGIO_BTN: /* read */ + data = (0x0ff & ctrl_inb(PA_PWRINT_CLR)); + data <<= 8; + data |= (0x0ff & ctrl_inb(PA_IMASK)); + data <<= 8; + data |= (0x0ff & landisk_btn); + data <<= 8; + data |= (0x0ff & (~ctrl_inb(PA_STATUS))); + break; + case GIODRV_IOCSGIO_BTNPID: /* write */ + landisk_btnctrlpid = data; + landisk_btn = 0; + if (irq_desc[IRQ_BUTTON].depth) { + enable_irq(IRQ_BUTTON); + } + if (irq_desc[IRQ_POWER].depth) { + enable_irq(IRQ_POWER); + } + break; + case GIODRV_IOCGGIO_BTNPID: /* read */ + data = landisk_btnctrlpid; + break; + default: + return -EFAULT; + break; + } + + if ((cmd & 0x01) == 0) { /* read */ + if (copy_to_user((int *)arg, &data, sizeof(int))) { + return -EFAULT; + } + } + return 0; +} diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c new file mode 100644 index 00000000000..35ba726a097 --- /dev/null +++ b/arch/sh/boards/landisk/rtc.c @@ -0,0 +1,93 @@ +/* + * arch/sh/boards/landisk/rtc.c -- RTC support + * + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + */ +/* + * modifed by kogiidena + * 2005.09.16 + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/bcd.h> +#include <asm/rtc.h> + +extern spinlock_t rtc_lock; + +extern void +rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon, + unsigned int BCD_day, unsigned int BCD_hr, + unsigned int BCD_min, unsigned int BCD_sec); + +extern unsigned long +rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon, + unsigned int *BCD_day, unsigned int *BCD_hr, + unsigned int *BCD_min, unsigned int *BCD_sec); + +void landisk_rtc_gettimeofday(struct timespec *tv) +{ + unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + tv->tv_sec = rs5c313_get_cmos_time + (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec); + tv->tv_nsec = 0; + spin_unlock_irqrestore(&rtc_lock, flags); +} + +int landisk_rtc_settimeofday(const time_t secs) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned long flags; + unsigned long nowtime = secs; + unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec; + + spin_lock_irqsave(&rtc_lock, flags); + + rs5c313_get_cmos_time + (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec); + cmos_minutes = BCD_min; + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr, + real_minutes, real_seconds); + } else { + printk(KERN_WARNING + "set_rtc_time: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + spin_unlock_irqrestore(&rtc_lock, flags); + return retval; +} + +void landisk_time_init(void) +{ + rtc_sh_get_time = landisk_rtc_gettimeofday; + rtc_sh_set_time = landisk_rtc_settimeofday; +} diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c new file mode 100644 index 00000000000..127b9e020e0 --- /dev/null +++ b/arch/sh/boards/landisk/setup.c @@ -0,0 +1,177 @@ +/* + * arch/sh/boards/landisk/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2002 Paul Mundt + * + * I-O DATA Device, Inc. LANDISK Support. + * + * Modified for LANDISK by + * Atom Create Engineering Co., Ltd. 2002. + * + * modifed by kogiidena + * 2005.09.16 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/mm.h> +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/landisk/iodata_landisk.h> +#include <asm/io.h> + +void landisk_time_init(void); +void init_landisk_IRQ(void); + +int landisk_ledparam; +int landisk_buzzerparam; +int landisk_arch; + +/* cycle the led's in the clasic knightrider/sun pattern */ +static void heartbeat_landisk(void) +{ + static unsigned int cnt = 0, blink = 0x00, period = 25; + volatile u8 *p = (volatile u8 *)PA_LED; + char data; + + if ((landisk_ledparam & 0x080) == 0) + return; + + cnt += 1; + + if (cnt < period) + return; + + cnt = 0; + blink++; + + data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0; + data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0; + data |= landisk_ledparam; + + /* buzzer */ + if (landisk_buzzerparam & 0x1) { + data |= 0x80; + } else { + data &= 0x7f; + } + *p = data; + + if (((landisk_ledparam & 0x007f7f00) == 0) && + (landisk_buzzerparam == 0)) + landisk_ledparam &= (~0x0080); + + landisk_buzzerparam >>= 1; +} + +static void landisk_power_off(void) +{ + ctrl_outb(0x01, PA_SHUTDOWN); +} + +static void check_usl5p(void) +{ + volatile u8 *p = (volatile u8 *)PA_LED; + u8 tmp1, tmp2; + + tmp1 = *p; + *p = 0x40; + tmp2 = *p; + *p = tmp1; + + landisk_arch = (tmp2 == 0x40); + if (landisk_arch == 1) { + /* arch == usl-5p */ + landisk_ledparam = 0x00000380; + landisk_ledparam |= (tmp1 & 0x07c); + } else { + /* arch == landisk */ + landisk_ledparam = 0x02000180; + landisk_ledparam |= 0x04; + } +} + +void *area5_io_base; +void *area6_io_base; + +static int __init landisk_cf_init(void) +{ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void *)PA_AREA5_IO); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); + area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area5_io_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } + + paddrbase = virt_to_phys((void *)PA_AREA6_IO); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16); + area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area6_io_base) { + printk("allocate_cf_area : can't open HDD I/O window!\n"); + return -ENOMEM; + } + + printk(KERN_INFO "Allocate Area5/6 success.\n"); + + /* XXX : do we need attribute and common-memory area also? */ + + return 0; +} + +static void __init landisk_setup(char **cmdline_p) +{ + device_initcall(landisk_cf_init); + + landisk_buzzerparam = 0; + check_usl5p(); + + printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); + + board_time_init = landisk_time_init; + pm_power_off = landisk_power_off; +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_landisk __initmv = { + .mv_name = "LANDISK", + .mv_setup = landisk_setup, + .mv_nr_irqs = 72, + .mv_inb = landisk_inb, + .mv_inw = landisk_inw, + .mv_inl = landisk_inl, + .mv_outb = landisk_outb, + .mv_outw = landisk_outw, + .mv_outl = landisk_outl, + .mv_inb_p = landisk_inb_p, + .mv_inw_p = landisk_inw, + .mv_inl_p = landisk_inl, + .mv_outb_p = landisk_outb_p, + .mv_outw_p = landisk_outw, + .mv_outl_p = landisk_outl, + .mv_insb = landisk_insb, + .mv_insw = landisk_insw, + .mv_insl = landisk_insl, + .mv_outsb = landisk_outsb, + .mv_outsw = landisk_outsw, + .mv_outsl = landisk_outsl, + .mv_ioport_map = landisk_ioport_map, + .mv_init_irq = init_landisk_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_landisk, +#endif +}; +ALIAS_MV(landisk) diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c index a76c655dcee..03b123a4bba 100644 --- a/arch/sh/boards/mpc1211/rtc.c +++ b/arch/sh/boards/mpc1211/rtc.c @@ -130,7 +130,7 @@ int mpc1211_rtc_settimeofday(const struct timeval *tv) void mpc1211_time_init(void) { - rtc_get_time = mpc1211_rtc_gettimeofday; - rtc_set_time = mpc1211_rtc_settimeofday; + rtc_sh_get_time = mpc1211_rtc_gettimeofday; + rtc_sh_set_time = mpc1211_rtc_settimeofday; } diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 2bfb221cc35..8eb5d430397 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -10,14 +10,12 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/interrupt.h> - #include <asm/io.h> #include <asm/machvec.h> #include <asm/mpc1211/mpc1211.h> #include <asm/mpc1211/pci.h> #include <asm/mpc1211/m1543c.h> - /* ALI15X3 SMBus address offsets */ #define SMBHSTSTS (0 + 0x3100) #define SMBHSTCNT (1 + 0x3100) @@ -50,11 +48,6 @@ #define ALI15X3_STS_TERM 0x80 /* terminated by abort */ #define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */ -const char *get_system_type(void) -{ - return "Interface MPC-1211(CTP/PCI/MPC-SH02)"; -} - static void __init pci_write_config(unsigned long busNo, unsigned long devNo, unsigned long fncNo, @@ -80,9 +73,6 @@ volatile unsigned long irq_err_count; static void disable_mpc1211_irq(unsigned int irq) { - unsigned long flags; - - save_and_cli(flags); if( irq < 8) { m_irq_mask |= (1 << irq); outb(m_irq_mask,I8259_M_MR); @@ -90,16 +80,11 @@ static void disable_mpc1211_irq(unsigned int irq) s_irq_mask |= (1 << (irq - 8)); outb(s_irq_mask,I8259_S_MR); } - restore_flags(flags); } static void enable_mpc1211_irq(unsigned int irq) { - unsigned long flags; - - save_and_cli(flags); - if( irq < 8) { m_irq_mask &= ~(1 << irq); outb(m_irq_mask,I8259_M_MR); @@ -107,7 +92,6 @@ static void enable_mpc1211_irq(unsigned int irq) s_irq_mask &= ~(1 << (irq - 8)); outb(s_irq_mask,I8259_S_MR); } - restore_flags(flags); } static inline int mpc1211_irq_real(unsigned int irq) @@ -131,10 +115,6 @@ static inline int mpc1211_irq_real(unsigned int irq) static void mask_and_ack_mpc1211(unsigned int irq) { - unsigned long flags; - - save_and_cli(flags); - if(irq < 8) { if(m_irq_mask & (1<<irq)){ if(!mpc1211_irq_real(irq)){ @@ -162,7 +142,6 @@ static void mask_and_ack_mpc1211(unsigned int irq) outb(0x60+(irq-8),I8259_S_CR); /* EOI */ outb(0x60+2,I8259_M_CR); } - restore_flags(flags); } static void end_mpc1211_irq(unsigned int irq) @@ -219,7 +198,7 @@ int mpc1211_irq_demux(int irq) return irq; } -void __init init_mpc1211_IRQ(void) +static void __init init_mpc1211_IRQ(void) { int i; /* @@ -255,23 +234,12 @@ void __init init_mpc1211_IRQ(void) } } -/* - Initialize the board -*/ - - -static void delay (void) -{ - volatile unsigned short tmp; - tmp = *(volatile unsigned short *) 0xa0000000; -} - -static void delay1000 (void) +static void delay1000(void) { int i; for (i=0; i<1000; i++) - delay (); + ctrl_delay(); } static int put_smb_blk(unsigned char *p, int address, int command, int no) @@ -314,26 +282,10 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no) return 0; } -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_mpc1211 __initmv = { - .mv_nr_irqs = 48, - .mv_irq_demux = mpc1211_irq_demux, - .mv_init_irq = init_mpc1211_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_mpc1211, -#endif -}; - -ALIAS_MV(mpc1211) - /* arch/sh/boards/mpc1211/rtc.c */ void mpc1211_time_init(void); -int __init platform_setup(void) +static void __init mpc1211_setup(char **cmdline_p) { unsigned char spd_buf[128]; @@ -357,3 +309,18 @@ int __init platform_setup(void) return 0; } +/* + * The Machine Vector + */ +struct sh_machine_vector mv_mpc1211 __initmv = { + .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)", + .mv_setup = mpc1211_setup, + .mv_nr_irqs = 48, + .mv_irq_demux = mpc1211_irq_demux, + .mv_init_irq = init_mpc1211_IRQ, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_mpc1211, +#endif +}; +ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/overdrive/Makefile b/arch/sh/boards/overdrive/Makefile deleted file mode 100644 index 245f03baf76..00000000000 --- a/arch/sh/boards/overdrive/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the STMicroelectronics Overdrive specific parts of the kernel -# - -obj-y := mach.o setup.o io.o irq.o led.o - -obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o - diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c deleted file mode 100644 index 956c2390122..00000000000 --- a/arch/sh/boards/overdrive/fpga.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file handles programming up the Altera Flex10K that interfaces to - * the Galileo, and does the PS/2 keyboard and mouse - * - */ - - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> - - -#include <asm/overdriver/gt64111.h> -#include <asm/overdrive/overdrive.h> -#include <asm/overdrive/fpga.h> - -#define FPGA_NotConfigHigh() (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT -#define FPGA_NotConfigLow() (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK - -/* I need to find out what (if any) the real delay factor here is */ -/* The delay is definately not critical */ -#define long_delay() {int i;for(i=0;i<10000;i++);} -#define short_delay() {int i;for(i=0;i<100;i++);} - -static void __init program_overdrive_fpga(const unsigned char *fpgacode, - int size) -{ - int timeout = 0; - int i, j; - unsigned char b; - static volatile unsigned char *FPGA_ControlReg = - (volatile unsigned char *) (OVERDRIVE_CTRL); - static volatile unsigned char *FPGA_ProgramReg = - (volatile unsigned char *) (FPGA_DCLK_ADDRESS); - - printk("FPGA: Commencing FPGA Programming\n"); - - /* The PCI reset but MUST be low when programming the FPGA !!! */ - b = (*FPGA_ControlReg) & RESET_PCI_MASK; - - (*FPGA_ControlReg) = b; - - /* Prepare FPGA to program */ - - FPGA_NotConfigHigh(); - long_delay(); - - FPGA_NotConfigLow(); - short_delay(); - - while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) { - printk("FPGA: Waiting for NotStatus to go Low ... \n"); - } - - FPGA_NotConfigHigh(); - - /* Wait for FPGA "ready to be programmed" signal */ - printk("FPGA: Waiting for NotStatus to go high (FPGA ready)... \n"); - - for (timeout = 0; - (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0) - && (timeout < FPGA_TIMEOUT)); timeout++); - - /* Check if timeout condition occured - i.e. an error */ - - if (timeout == FPGA_TIMEOUT) { - printk - ("FPGA: Failed to program - Timeout waiting for notSTATUS to go high\n"); - return; - } - - printk("FPGA: Copying data to FPGA ... %d bytes\n", size); - - /* Copy array to FPGA - bit at a time */ - - for (i = 0; i < size; i++) { - volatile unsigned w = 0; - - for (j = 0; j < 8; j++) { - *FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01; - short_delay(); - } - if ((i & 0x3ff) == 0) { - printk("."); - } - } - - /* Waiting for CONFDONE to go high - means the program is complete */ - - for (timeout = 0; - (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0) - && (timeout < FPGA_TIMEOUT)); timeout++) { - - *FPGA_ProgramReg = 0x0; - long_delay(); - } - - if (timeout == FPGA_TIMEOUT) { - printk - ("FPGA: Failed to program - Timeout waiting for CONFDONE to go high\n"); - return; - } else { /* Clock another 10 times - gets the device into a working state */ - for (i = 0; i < 10; i++) { - *FPGA_ProgramReg = 0x0; - short_delay(); - } - } - - printk("FPGA: Programming complete\n"); -} - - -static const unsigned char __init fpgacode[] = { -#include "./overdrive.ttf" /* Code from maxplus2 compiler */ - , 0, 0 -}; - - -int __init init_overdrive_fpga(void) -{ - program_overdrive_fpga(fpgacode, sizeof(fpgacode)); - - return 0; -} diff --git a/arch/sh/boards/overdrive/galileo.c b/arch/sh/boards/overdrive/galileo.c deleted file mode 100644 index 29e48971bba..00000000000 --- a/arch/sh/boards/overdrive/galileo.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains the PCI routines required for the Galileo GT6411 - * PCI bridge as used on the Orion and Overdrive boards. - * - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/ioport.h> - -#include <asm/overdrive/overdrive.h> -#include <asm/overdrive/gt64111.h> - - -/* After boot, we shift the Galileo registers so that they appear - * in BANK6, along with IO space. This means we can have one contingous - * lump of PCI address space without these registers appearing in the - * middle of them - */ - -#define GT64111_BASE_ADDRESS 0xbb000000 -#define GT64111_IO_BASE_ADDRESS 0x1000 -/* The GT64111 registers appear at this address to the SH4 after reset */ -#define RESET_GT64111_BASE_ADDRESS 0xb4000000 - -/* Macros used to access the Galileo registers */ -#define RESET_GT64111_REG(x) (RESET_GT64111_BASE_ADDRESS+x) -#define GT64111_REG(x) (GT64111_BASE_ADDRESS+x) - -#define RESET_GT_WRITE(x,v) writel((v),RESET_GT64111_REG(x)) - -#define RESET_GT_READ(x) readl(RESET_GT64111_REG(x)) - -#define GT_WRITE(x,v) writel((v),GT64111_REG(x)) -#define GT_WRITE_BYTE(x,v) writeb((v),GT64111_REG(x)) -#define GT_WRITE_SHORT(x,v) writew((v),GT64111_REG(x)) - -#define GT_READ(x) readl(GT64111_REG(x)) -#define GT_READ_BYTE(x) readb(GT64111_REG(x)) -#define GT_READ_SHORT(x) readw(GT64111_REG(x)) - - -/* Where the various SH banks start at */ -#define SH_BANK4_ADR 0xb0000000 -#define SH_BANK5_ADR 0xb4000000 -#define SH_BANK6_ADR 0xb8000000 - -/* Masks out everything but lines 28,27,26 */ -#define BANK_SELECT_MASK 0x1c000000 - -#define SH4_TO_BANK(x) ( (x) & BANK_SELECT_MASK) - -/* - * Masks used for address conversaion. Bank 6 is used for IO and - * has all the address bits zeroed by the FPGA. Special case this - */ -#define MEMORY_BANK_MASK 0x1fffffff -#define IO_BANK_MASK 0x03ffffff - -/* Mark bank 6 as the bank used for IO. You can change this in the FPGA code - * if you want - */ -#define IO_BANK_ADR PCI_GTIO_BASE - -/* Will select the correct mask to apply depending on the SH$ address */ -#define SELECT_BANK_MASK(x) \ - ( (SH4_TO_BANK(x)==SH4_TO_BANK(IO_BANK_ADR)) ? IO_BANK_MASK : MEMORY_BANK_MASK) - -/* Converts between PCI space and P2 region */ -#define SH4_TO_PCI(x) ((x)&SELECT_BANK_MASK(x)) - -/* Various macros for figuring out what to stick in the Galileo registers. - * You *really* don't want to figure this stuff out by hand, you always get - * it wrong - */ -#define GT_MEM_LO_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7ff) -#define GT_MEM_HI_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7f) -#define GT_MEM_SUB_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>20)&0xff) - -#define PROGRAM_HI_LO(block,a,s) \ - GT_WRITE(block##_LO_DEC_ADR,GT_MEM_LO_ADR(a));\ - GT_WRITE(block##_HI_DEC_ADR,GT_MEM_HI_ADR(a+s-1)) - -#define PROGRAM_SUB_HI_LO(block,a,s) \ - GT_WRITE(block##_LO_DEC_ADR,GT_MEM_SUB_ADR(a));\ - GT_WRITE(block##_HI_DEC_ADR,GT_MEM_SUB_ADR(a+s-1)) - -/* We need to set the size, and the offset register */ - -#define GT_BAR_MASK(x) ((x)&~0xfff) - -/* Macro to set up the BAR in the Galileo. Essentially used for the DRAM */ -#define PROGRAM_GT_BAR(block,a,s) \ - GT_WRITE(PCI_##block##_BANK_SIZE,GT_BAR_MASK((s-1)));\ - write_config_to_galileo(PCI_CONFIG_##block##_BASE_ADR,\ - GT_BAR_MASK(a)) - -#define DISABLE_GT_BAR(block) \ - GT_WRITE(PCI_##block##_BANK_SIZE,0),\ - GT_CONFIG_WRITE(PCI_CONFIG_##block##_BASE_ADR,\ - 0x80000000) - -/* Macros to disable things we are not going to use */ -#define DISABLE_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0x7ff);\ - GT_WRITE(x##_HI_DEC_ADR,0x00) - -#define DISABLE_SUB_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0xff);\ - GT_WRITE(x##_HI_DEC_ADR,0x00) - -static void __init reset_pci(void) -{ - /* Set RESET_PCI bit high */ - writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL); - udelay(250); - - /* Set RESET_PCI bit low */ - writeb(readb(OVERDRIVE_CTRL) & RESET_PCI_MASK, OVERDRIVE_CTRL); - udelay(250); - - writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL); - udelay(250); -} - -static int write_config_to_galileo(int where, u32 val); -#define GT_CONFIG_WRITE(where,val) write_config_to_galileo(where,val) - -#define ENABLE_PCI_DRAM - - -#ifdef TEST_DRAM -/* Test function to check out if the PCI DRAM is working OK */ -static int /* __init */ test_dram(unsigned *base, unsigned size) -{ - unsigned *p = base; - unsigned *end = (unsigned *) (((unsigned) base) + size); - unsigned w; - - for (p = base; p < end; p++) { - *p = 0xffffffff; - if (*p != 0xffffffff) { - printk("AAARGH -write failed!!! at %p is %x\n", p, - *p); - return 0; - } - *p = 0x0; - if (*p != 0x0) { - printk("AAARGH -write failed!!!\n"); - return 0; - } - } - - for (p = base; p < end; p++) { - *p = (unsigned) p; - if (*p != (unsigned) p) { - printk("Failed at 0x%p, actually is 0x%x\n", p, - *p); - return 0; - } - } - - for (p = base; p < end; p++) { - w = ((unsigned) p & 0xffff0000); - *p = w | (w >> 16); - } - - for (p = base; p < end; p++) { - w = ((unsigned) p & 0xffff0000); - w |= (w >> 16); - if (*p != w) { - printk - ("Failed at 0x%p, should be 0x%x actually is 0x%x\n", - p, w, *p); - return 0; - } - } - - return 1; -} -#endif - - -/* Function to set up and initialise the galileo. This sets up the BARS, - * maps the DRAM into the address space etc,etc - */ -int __init galileo_init(void) -{ - reset_pci(); - - /* Now shift the galileo regs into this block */ - RESET_GT_WRITE(INTERNAL_SPACE_DEC, - GT_MEM_LO_ADR(GT64111_BASE_ADDRESS)); - - /* Should have a sanity check here, that you can read back at the new - * address what you just wrote - */ - - /* Disable decode for all regions */ - DISABLE_DECODE(RAS10); - DISABLE_DECODE(RAS32); - DISABLE_DECODE(CS20); - DISABLE_DECODE(CS3); - DISABLE_DECODE(PCI_IO); - DISABLE_DECODE(PCI_MEM0); - DISABLE_DECODE(PCI_MEM1); - - /* Disable all BARS */ - GT_WRITE(BAR_ENABLE_ADR, 0x1ff); - DISABLE_GT_BAR(RAS10); - DISABLE_GT_BAR(RAS32); - DISABLE_GT_BAR(CS20); - DISABLE_GT_BAR(CS3); - - /* Tell the BAR where the IO registers now are */ - GT_CONFIG_WRITE(PCI_CONFIG_INT_REG_IO_ADR,GT_BAR_MASK( - (GT64111_IO_BASE_ADDRESS & - IO_BANK_MASK))); - /* set up a 112 Mb decode */ - PROGRAM_HI_LO(PCI_MEM0, SH_BANK4_ADR, 112 * 1024 * 1024); - - /* Set up a 32 MB io space decode */ - PROGRAM_HI_LO(PCI_IO, IO_BANK_ADR, 32 * 1024 * 1024); - -#ifdef ENABLE_PCI_DRAM - /* Program up the DRAM configuration - there is DRAM only in bank 0 */ - /* Now set up the DRAM decode */ - PROGRAM_HI_LO(RAS10, PCI_DRAM_BASE, PCI_DRAM_SIZE); - /* And the sub decode */ - PROGRAM_SUB_HI_LO(RAS0, PCI_DRAM_BASE, PCI_DRAM_SIZE); - - DISABLE_SUB_DECODE(RAS1); - - /* Set refresh rate */ - GT_WRITE(DRAM_BANK0_PARMS, 0x3f); - GT_WRITE(DRAM_CFG, 0x100); - - /* we have to lob off the top bits rememeber!! */ - PROGRAM_GT_BAR(RAS10, SH4_TO_PCI(PCI_DRAM_BASE), PCI_DRAM_SIZE); - -#endif - - /* We are only interested in decoding RAS10 and the Galileo's internal - * registers (as IO) on the PCI bus - */ -#ifdef ENABLE_PCI_DRAM - GT_WRITE(BAR_ENABLE_ADR, (~((1 << 8) | (1 << 3))) & 0x1ff); -#else - GT_WRITE(BAR_ENABLE_ADR, (~(1 << 3)) & 0x1ff); -#endif - - /* Change the class code to host bridge, it actually powers up - * as a memory controller - */ - GT_CONFIG_WRITE(8, 0x06000011); - - /* Allow the galileo to master the PCI bus */ - GT_CONFIG_WRITE(PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); - - -#if 0 - printk("Testing PCI DRAM - "); - if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) { - printk("Passed\n"); - }else { - printk("FAILED\n"); - } -#endif - return 0; - -} - - -#define SET_CONFIG_BITS(bus,devfn,where)\ - ((1<<31) | ((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) - -#define CONFIG_CMD(dev, where) SET_CONFIG_BITS((dev)->bus->number,(dev)->devfn,where) - -/* This write to the galileo config registers, unlike the functions below, can - * be used before the PCI subsystem has started up - */ -static int __init write_config_to_galileo(int where, u32 val) -{ - GT_WRITE(PCI_CFG_ADR, SET_CONFIG_BITS(0, 0, where)); - - GT_WRITE(PCI_CFG_DATA, val); - return 0; -} - -/* We exclude the galileo and slot 31, the galileo because I don't know how to stop - * the setup code shagging up the setup I have done on it, and 31 because the whole - * thing locks up if you try to access that slot (which doesn't exist of course anyway - */ - -#define EXCLUDED_DEV(dev) ((dev->bus->number==0) && ((PCI_SLOT(dev->devfn)==0) || (PCI_SLOT(dev->devfn) == 31))) - -static int galileo_read_config_byte(struct pci_dev *dev, int where, - u8 * val) -{ - - - /* I suspect this doesn't work because this drives a special cycle ? */ - if (EXCLUDED_DEV(dev)) { - *val = 0xff; - return PCIBIOS_SUCCESSFUL; - } - /* Start the config cycle */ - GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); - /* Read back the result */ - *val = GT_READ_BYTE(PCI_CFG_DATA + (where & 3)); - - return PCIBIOS_SUCCESSFUL; -} - - -static int galileo_read_config_word(struct pci_dev *dev, int where, - u16 * val) -{ - - if (EXCLUDED_DEV(dev)) { - *val = 0xffff; - return PCIBIOS_SUCCESSFUL; - } - - GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); - *val = GT_READ_SHORT(PCI_CFG_DATA + (where & 2)); - - return PCIBIOS_SUCCESSFUL; -} - - -static int galileo_read_config_dword(struct pci_dev *dev, int where, - u32 * val) -{ - if (EXCLUDED_DEV(dev)) { - *val = 0xffffffff; - return PCIBIOS_SUCCESSFUL; - } - - GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); - *val = GT_READ(PCI_CFG_DATA); - - return PCIBIOS_SUCCESSFUL; -} - -static int galileo_write_config_byte(struct pci_dev *dev, int where, - u8 val) -{ - GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); - - GT_WRITE_BYTE(PCI_CFG_DATA + (where & 3), val); - - return PCIBIOS_SUCCESSFUL; -} - - -static int galileo_write_config_word(struct pci_dev *dev, int where, - u16 val) -{ - GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); - - GT_WRITE_SHORT(PCI_CFG_DATA + (where & 2), val); - - return PCIBIOS_SUCCESSFUL; -} - -static int galileo_write_config_dword(struct pci_dev *dev, int where, - u32 val) -{ - GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); - - GT_WRITE(PCI_CFG_DATA, val); - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops pci_config_ops = { - galileo_read_config_byte, - galileo_read_config_word, - galileo_read_config_dword, - galileo_write_config_byte, - galileo_write_config_word, - galileo_write_config_dword -}; - - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - - -static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) -{ - return PCI_SLOT(dev->devfn); -} - -static int __init map_od_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* Slot 1: Galileo - * Slot 2: PCI Slot 1 - * Slot 3: PCI Slot 2 - * Slot 4: ESS - */ - switch (slot) { - case 2: - return OVERDRIVE_PCI_IRQ1; - case 3: - /* Note this assumes you have a hacked card in slot 2 */ - return OVERDRIVE_PCI_IRQ2; - case 4: - return OVERDRIVE_ESS_IRQ; - default: - /* printk("PCI: Unexpected IRQ mapping request for slot %d\n", slot); */ - return -1; - } -} - - - -void __init -pcibios_fixup_pbus_ranges(struct pci_bus *bus, struct pbus_set_ranges_data *ranges) -{ - ranges->io_start -= bus->resource[0]->start; - ranges->io_end -= bus->resource[0]->start; - ranges->mem_start -= bus->resource[1]->start; - ranges->mem_end -= bus->resource[1]->start; -} - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -void __init pcibios_init(void) -{ - static struct resource galio,galmem; - - /* Allocate the registers used by the Galileo */ - galio.flags = IORESOURCE_IO; - galio.name = "Galileo GT64011"; - galmem.flags = IORESOURCE_MEM|IORESOURCE_PREFETCH; - galmem.name = "Galileo GT64011 DRAM"; - - allocate_resource(&ioport_resource, &galio, 256, - GT64111_IO_BASE_ADDRESS,GT64111_IO_BASE_ADDRESS+256, 256, NULL, NULL); - allocate_resource(&iomem_resource, &galmem,PCI_DRAM_SIZE, - PHYSADDR(PCI_DRAM_BASE), PHYSADDR(PCI_DRAM_BASE)+PCI_DRAM_SIZE, - PCI_DRAM_SIZE, NULL, NULL); - - /* ok, do the scan man */ - pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL); - - pci_assign_unassigned_resources(); - pci_fixup_irqs(no_swizzle, map_od_irq); - -#ifdef TEST_DRAM - printk("Testing PCI DRAM - "); - if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) { - printk("Passed\n"); - }else { - printk("FAILED\n"); - } -#endif - -} - -char * __init pcibios_setup(char *str) -{ - return str; -} - - - -int pcibios_enable_device(struct pci_dev *dev) -{ - - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx = 0; idx < 6; idx++) { - r = dev->resource + idx; - if (!r->start && r->end) { - printk(KERN_ERR - "PCI: Device %s not available because" - " of resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; - -} - -/* We should do some optimisation work here I think. Ok for now though */ -void __init pcibios_fixup_bus(struct pci_bus *bus) -{ - -} - -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size) -{ -} - -void __init pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - - unsigned long where, size; - u32 reg; - - - printk("PCI: Assigning %3s %08lx to %s\n", - res->flags & IORESOURCE_IO ? "IO" : "MEM", - res->start, dev->name); - - where = PCI_BASE_ADDRESS_0 + resource * 4; - size = res->end - res->start; - - pci_read_config_dword(dev, where, ®); - reg = (reg & size) | (((u32) (res->start - root->start)) & ~size); - pci_write_config_dword(dev, where, reg); -} - - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - printk("PCI: Assigning IRQ %02d to %s\n", irq, dev->name); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as certain crappy BIOSes forget to set it properly. - */ -unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk("PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} diff --git a/arch/sh/boards/overdrive/io.c b/arch/sh/boards/overdrive/io.c deleted file mode 100644 index 4671b6b047b..00000000000 --- a/arch/sh/boards/overdrive/io.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains the I/O routines for use on the overdrive board - * - */ - -#include <linux/types.h> -#include <linux/delay.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/addrspace.h> - -#include <asm/overdrive/overdrive.h> - -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the SuperH architecture, we just read/write the - * memory location directly. - */ - -#define dprintk(x...) - -/* Translates an IO address to where it is mapped in memory */ - -#define io_addr(x) (((unsigned)(x))|PCI_GTIO_BASE) - -unsigned char od_inb(unsigned long port) -{ -dprintk("od_inb(%x)\n", port); - return readb(io_addr(port)) & 0xff; -} - - -unsigned short od_inw(unsigned long port) -{ -dprintk("od_inw(%x)\n", port); - return readw(io_addr(port)) & 0xffff; -} - -unsigned int od_inl(unsigned long port) -{ -dprintk("od_inl(%x)\n", port); - return readl(io_addr(port)); -} - -void od_outb(unsigned char value, unsigned long port) -{ -dprintk("od_outb(%x, %x)\n", value, port); - writeb(value, io_addr(port)); -} - -void od_outw(unsigned short value, unsigned long port) -{ -dprintk("od_outw(%x, %x)\n", value, port); - writew(value, io_addr(port)); -} - -void od_outl(unsigned int value, unsigned long port) -{ -dprintk("od_outl(%x, %x)\n", value, port); - writel(value, io_addr(port)); -} - -/* This is horrible at the moment - needs more work to do something sensible */ -#define IO_DELAY() udelay(10) - -#define OUT_DELAY(x,type) \ -void od_out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();} - -#define IN_DELAY(x,type) \ -unsigned type od_in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;} - - -OUT_DELAY(b,char) -OUT_DELAY(w,short) -OUT_DELAY(l,int) - -IN_DELAY(b,char) -IN_DELAY(w,short) -IN_DELAY(l,int) - - -/* Now for the string version of these functions */ -void od_outsb(unsigned long port, const void *addr, unsigned long count) -{ - int i; - unsigned char *p = (unsigned char *) addr; - - for (i = 0; i < count; i++, p++) { - outb(*p, port); - } -} - - -void od_insb(unsigned long port, void *addr, unsigned long count) -{ - int i; - unsigned char *p = (unsigned char *) addr; - - for (i = 0; i < count; i++, p++) { - *p = inb(port); - } -} - -/* For the 16 and 32 bit string functions, we have to worry about alignment. - * The SH does not do unaligned accesses, so we have to read as bytes and - * then write as a word or dword. - * This can be optimised a lot more, especially in the case where the data - * is aligned - */ - -void od_outsw(unsigned long port, const void *addr, unsigned long count) -{ - int i; - unsigned short tmp; - unsigned char *p = (unsigned char *) addr; - - for (i = 0; i < count; i++, p += 2) { - tmp = (*p) | ((*(p + 1)) << 8); - outw(tmp, port); - } -} - - -void od_insw(unsigned long port, void *addr, unsigned long count) -{ - int i; - unsigned short tmp; - unsigned char *p = (unsigned char *) addr; - - for (i = 0; i < count; i++, p += 2) { - tmp = inw(port); - p[0] = tmp & 0xff; - p[1] = (tmp >> 8) & 0xff; - } -} - - -void od_outsl(unsigned long port, const void *addr, unsigned long count) -{ - int i; - unsigned tmp; - unsigned char *p = (unsigned char *) addr; - - for (i = 0; i < count; i++, p += 4) { - tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) | - ((*(p + 3)) << 24); - outl(tmp, port); - } -} - - -void od_insl(unsigned long port, void *addr, unsigned long count) -{ - int i; - unsigned tmp; - unsigned char *p = (unsigned char *) addr; - - for (i = 0; i < count; i++, p += 4) { - tmp = inl(port); - p[0] = tmp & 0xff; - p[1] = (tmp >> 8) & 0xff; - p[2] = (tmp >> 16) & 0xff; - p[3] = (tmp >> 24) & 0xff; - - } -} diff --git a/arch/sh/boards/overdrive/irq.c b/arch/sh/boards/overdrive/irq.c deleted file mode 100644 index 5d730c70389..00000000000 --- a/arch/sh/boards/overdrive/irq.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Looks after interrupts on the overdrive board. - * - * Bases on the IPR irq system - */ - -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/system.h> -#include <asm/io.h> - -#include <asm/overdrive/overdrive.h> - -struct od_data { - int overdrive_irq; - int irq_mask; -}; - -#define NUM_EXTERNAL_IRQS 16 -#define EXTERNAL_IRQ_NOT_IN_USE (-1) -#define EXTERNAL_IRQ_NOT_ASSIGNED (-1) - -/* - * This table is used to determine what to program into the FPGA's CT register - * for the specified Linux IRQ. - * - * The irq_mask gives the interrupt number from the PCI board (PCI_Int(6:0)) - * but is one greater than that because the because the FPGA treats 0 - * as disabled, a value of 1 asserts PCI_Int0, and so on. - * - * The overdrive_irq specifies which of the eight interrupt sources generates - * that interrupt, and but is multiplied by four to give the bit offset into - * the CT register. - * - * The seven interrupts levels (SH4 IRL's) we have available here is hardwired - * by the EPLD. The assignments here of which PCI interrupt generates each - * level is arbitary. - */ -static struct od_data od_data_table[NUM_EXTERNAL_IRQS] = { - /* overdrive_irq , irq_mask */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 0 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 7}, /* 1 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 6}, /* 2 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 3 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 5}, /* 4 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 5 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 6 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 4}, /* 7 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 8 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 9 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 3}, /* 10 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 2}, /* 11 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 12 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, 1}, /* 13 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 14 */ - {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE} /* 15 */ -}; - -static void set_od_data(int overdrive_irq, int irq) -{ - if (irq >= NUM_EXTERNAL_IRQS || irq < 0) - return; - od_data_table[irq].overdrive_irq = overdrive_irq << 2; -} - -static void enable_od_irq(unsigned int irq); -void disable_od_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_od_irq disable_od_irq - -static void mask_and_ack_od(unsigned int); -static void end_od_irq(unsigned int irq); - -static unsigned int startup_od_irq(unsigned int irq) -{ - enable_od_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type od_irq_type = { - .typename = "Overdrive-IRQ", - .startup = startup_od_irq, - .shutdown = shutdown_od_irq, - .enable = enable_od_irq, - .disable = disable_od_irq, - .ack = mask_and_ack_od, - .end = end_od_irq -}; - -static void disable_od_irq(unsigned int irq) -{ - unsigned val, flags; - int overdrive_irq; - unsigned mask; - - /* Not a valid interrupt */ - if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) - return; - - /* Is is necessary to use a cli here? Would a spinlock not be - * mroe efficient? - */ - local_irq_save(flags); - overdrive_irq = od_data_table[irq].overdrive_irq; - if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) { - mask = ~(0x7 << overdrive_irq); - val = ctrl_inl(OVERDRIVE_INT_CT); - val &= mask; - ctrl_outl(val, OVERDRIVE_INT_CT); - } - local_irq_restore(flags); -} - -static void enable_od_irq(unsigned int irq) -{ - unsigned val, flags; - int overdrive_irq; - unsigned mask; - - /* Not a valid interrupt */ - if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) - return; - - /* Set priority in OD back to original value */ - local_irq_save(flags); - /* This one is not in use currently */ - overdrive_irq = od_data_table[irq].overdrive_irq; - if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) { - val = ctrl_inl(OVERDRIVE_INT_CT); - mask = ~(0x7 << overdrive_irq); - val &= mask; - mask = od_data_table[irq].irq_mask << overdrive_irq; - val |= mask; - ctrl_outl(val, OVERDRIVE_INT_CT); - } - local_irq_restore(flags); -} - - - -/* this functions sets the desired irq handler to be an overdrive type */ -static void __init make_od_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &od_irq_type; - disable_od_irq(irq); -} - - -static void mask_and_ack_od(unsigned int irq) -{ - disable_od_irq(irq); -} - -static void end_od_irq(unsigned int irq) -{ - enable_od_irq(irq); -} - -void __init init_overdrive_irq(void) -{ - int i; - - /* Disable all interrupts */ - ctrl_outl(0, OVERDRIVE_INT_CT); - - /* Update interrupt pin mode to use encoded interrupts */ - i = ctrl_inw(INTC_ICR); - i &= ~INTC_ICR_IRLM; - ctrl_outw(i, INTC_ICR); - - for (i = 0; i < NUM_EXTERNAL_IRQS; i++) { - if (od_data_table[i].irq_mask != EXTERNAL_IRQ_NOT_IN_USE) { - make_od_irq(i); - } else if (i != 15) { // Cannot use imask on level 15 - make_imask_irq(i); - } - } - - /* Set up the interrupts */ - set_od_data(OVERDRIVE_PCI_INTA, OVERDRIVE_PCI_IRQ1); - set_od_data(OVERDRIVE_PCI_INTB, OVERDRIVE_PCI_IRQ2); - set_od_data(OVERDRIVE_AUDIO_INT, OVERDRIVE_ESS_IRQ); -} diff --git a/arch/sh/boards/overdrive/led.c b/arch/sh/boards/overdrive/led.c deleted file mode 100644 index 860d7f204a4..00000000000 --- a/arch/sh/boards/overdrive/led.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/arch/sh/overdrive/led.c - * - * Copyright (C) 1999 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains an Overdrive specific LED feature. - */ - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/overdrive/overdrive.h> - -static void mach_led(int position, int value) -{ - unsigned long flags; - unsigned long reg; - - local_irq_save(flags); - - reg = readl(OVERDRIVE_CTRL); - if (value) { - reg |= (1<<3); - } else { - reg &= ~(1<<3); - } - writel(reg, OVERDRIVE_CTRL); - - local_irq_restore(flags); -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* acts like an actual heart beat -- ie thump-thump-pause... */ -void heartbeat_od(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; - dist = period / 4; - } -} -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/overdrive/mach.c b/arch/sh/boards/overdrive/mach.c deleted file mode 100644 index 2834a03ae47..00000000000 --- a/arch/sh/boards/overdrive/mach.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * linux/arch/sh/overdrive/mach.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the STMicroelectronics Overdrive - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/io_unknown.h> -#include <asm/io_generic.h> -#include <asm/overdrive/io.h> - -void heartbeat_od(void); -void init_overdrive_irq(void); -void galileo_pcibios_init(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_od __initmv = { - .mv_nr_irqs = 48, - - .mv_inb = od_inb, - .mv_inw = od_inw, - .mv_inl = od_inl, - .mv_outb = od_outb, - .mv_outw = od_outw, - .mv_outl = od_outl, - - .mv_inb_p = od_inb_p, - .mv_inw_p = od_inw_p, - .mv_inl_p = od_inl_p, - .mv_outb_p = od_outb_p, - .mv_outw_p = od_outw_p, - .mv_outl_p = od_outl_p, - - .mv_insb = od_insb, - .mv_insw = od_insw, - .mv_insl = od_insl, - .mv_outsb = od_outsb, - .mv_outsw = od_outsw, - .mv_outsl = od_outsl, - -#ifdef CONFIG_PCI - .mv_init_irq = init_overdrive_irq, -#endif -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_od, -#endif -}; - -ALIAS_MV(od) diff --git a/arch/sh/boards/overdrive/pcidma.c b/arch/sh/boards/overdrive/pcidma.c deleted file mode 100644 index 1c9bfeda00b..00000000000 --- a/arch/sh/boards/overdrive/pcidma.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Dynamic DMA mapping support. - * - * On the overdrive, we can only DMA from memory behind the PCI bus! - * this means that all DMA'able memory must come from there. - * this restriction will not apply to later boards. - */ - -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/pci.h> -#include <asm/io.h> - -void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, - dma_addr_t * dma_handle) -{ - void *ret; - int gfp = GFP_ATOMIC; - - printk("BUG: pci_alloc_consistent() called - not yet supported\n"); - /* We ALWAYS need DMA memory on the overdrive hardware, - * due to it's extreme weirdness - * Need to flush the cache here as well, since the memory - * can still be seen through the cache! - */ - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_bus(ret); - } - return ret; -} - -void pci_free_consistent(struct pci_dev *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} diff --git a/arch/sh/boards/overdrive/setup.c b/arch/sh/boards/overdrive/setup.c deleted file mode 100644 index a3a7744c204..00000000000 --- a/arch/sh/boards/overdrive/setup.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/sh/overdrive/setup.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * STMicroelectronics Overdrive Support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> - -#include <asm/overdrive/overdrive.h> -#include <asm/overdrive/fpga.h> - -const char *get_system_type(void) -{ - return "SH7750 Overdrive"; -} - -/* - * Initialize the board - */ -int __init platform_setup(void) -{ -#ifdef CONFIG_PCI - init_overdrive_fpga(); - galileo_init(); -#endif - - /* Enable RS232 receive buffers */ - writel(0x1e, OVERDRIVE_CTRL); -} diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/renesas/edosk7705/Makefile index 7fccbf2e4a1..14bdd531f11 100644 --- a/arch/sh/boards/renesas/edosk7705/Makefile +++ b/arch/sh/boards/renesas/edosk7705/Makefile @@ -1,10 +1,6 @@ # # Makefile for the EDOSK7705 specific parts of the kernel # -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# obj-y := setup.o io.o diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c index ba143fa4afa..ec5be010771 100644 --- a/arch/sh/boards/renesas/edosk7705/setup.c +++ b/arch/sh/boards/renesas/edosk7705/setup.c @@ -8,19 +8,21 @@ * Modified for edosk7705 development * board by S. Dunn, 2003. */ - #include <linux/init.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> #include <asm/edosk7705/io.h> -static void init_edosk7705(void); +static void __init sh_edosk7705_init_irq(void) +{ + /* This is the Ethernet interrupt */ + make_imask_irq(0x09); +} /* * The Machine Vector */ - struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_name = "EDOSK7705", .mv_nr_irqs = 80, .mv_inb = sh_edosk7705_inb, @@ -37,23 +39,6 @@ struct sh_machine_vector mv_edosk7705 __initmv = { .mv_outsl = sh_edosk7705_outsl, .mv_isa_port2addr = sh_edosk7705_isa_port2addr, - .mv_init_irq = init_edosk7705, + .mv_init_irq = sh_edosk7705_init_irq, }; ALIAS_MV(edosk7705) - -static void __init init_edosk7705(void) -{ - /* This is the Ethernet interrupt */ - make_imask_irq(0x09); -} - -const char *get_system_type(void) -{ - return "EDOSK7705"; -} - -void __init platform_setup(void) -{ - /* Nothing .. */ -} - diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig new file mode 100644 index 00000000000..1743be477be --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/Kconfig @@ -0,0 +1,12 @@ +if SH_HS7751RVOIP + +menu "HS7751RVoIP options" + +config HS7751RVOIP_CODEC + bool "Support VoIP Codec section" + help + Selecting this option will support CODEC section. + +endmenu + +endif diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile index e8b4109ace1..e626377c55e 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/Makefile +++ b/arch/sh/boards/renesas/hs7751rvoip/Makefile @@ -1,12 +1,8 @@ # # Makefile for the HS7751RVoIP specific parts of the kernel # -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# -obj-y := mach.o setup.o io.o irq.o led.o +obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c index 3a1abfa2fef..9ea1136b219 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/io.c +++ b/arch/sh/boards/renesas/hs7751rvoip/io.c @@ -10,21 +10,16 @@ * placeholder code from io_hs7751rvoip.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> #include <asm/io.h> #include <asm/hs7751rvoip/hs7751rvoip.h> #include <asm/addrspace.h> -#include <linux/module.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - -extern void *area5_io8_base; /* Area 5 8bit I/O Base address */ extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ extern void *area5_io16_base; /* Area 5 16bit I/O Base address */ -extern void *area6_io16_base; /* Area 6 16bit I/O Base address */ /* * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC) @@ -33,25 +28,8 @@ extern void *area6_io16_base; /* Area 6 16bit I/O Base address */ * like the other Solution Engine boards. */ -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#if defined(CONFIG_HS7751RVOIP_CODEC) #define CODEC_IO_BASE 0x1000 -#endif - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} +#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE)) static inline unsigned long port2adr(unsigned int port) { @@ -59,9 +37,10 @@ static inline unsigned long port2adr(unsigned int port) if (port == 0x3f6) return ((unsigned long)area5_io16_base + 0x0c); else - return ((unsigned long)area5_io16_base + 0x800 + ((port-0x1f0) << 1)); + return ((unsigned long)area5_io16_base + 0x800 + + ((port-0x1f0) << 1)); else - maybebadio(port2adr, (unsigned long)port); + maybebadio((unsigned long)port); return port; } @@ -78,25 +57,10 @@ static inline int shifted_port(unsigned long port) } #if defined(CONFIG_HS7751RVOIP_CODEC) -static inline int -codec_port(unsigned long port) -{ - if (CODEC_IO_BASE <= port && port < (CODEC_IO_BASE+0x20)) - return 1; - else - return 0; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#define codec_port(port) \ + ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20))) #else -#define CHECK_SH7751_PCIIO(port) (0) +#define codec_port(port) (0) #endif /* @@ -109,15 +73,13 @@ codec_port(unsigned long port) unsigned char hs7751rvoip_inb(unsigned long port) { if (PXSEG(port)) - return *(volatile unsigned char *)port; -#if defined(CONFIG_HS7751RVOIP_CODEC) + return ctrl_inb(port); else if (codec_port(port)) - return *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + return ctrl_inb(CODEC_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inb(pci_ioaddr(port)); else - return (*(volatile unsigned short *)port2adr(port) & 0xff); + return ctrl_inw(port2adr(port)) & 0xff; } unsigned char hs7751rvoip_inb_p(unsigned long port) @@ -125,38 +87,36 @@ unsigned char hs7751rvoip_inb_p(unsigned long port) unsigned char v; if (PXSEG(port)) - v = *(volatile unsigned char *)port; -#if defined(CONFIG_HS7751RVOIP_CODEC) + v = ctrl_inb(port); else if (codec_port(port)) - v = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + v = ctrl_inb(CODEC_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + v = ctrl_inb(pci_ioaddr(port)); else - v = (*(volatile unsigned short *)port2adr(port) & 0xff); - delay(); + v = ctrl_inw(port2adr(port)) & 0xff; + ctrl_delay(); return v; } unsigned short hs7751rvoip_inw(unsigned long port) { if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + return ctrl_inw(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inw(pci_ioaddr(port)); else - maybebadio(inw, port); + maybebadio(port); return 0; } unsigned int hs7751rvoip_inl(unsigned long port) { if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned long *)PCI_IOMAP(port); + return ctrl_inl(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inl(pci_ioaddr(port)); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -164,146 +124,160 @@ void hs7751rvoip_outb(unsigned char value, unsigned long port) { if (PXSEG(port)) - *(volatile unsigned char *)port = value; -#if defined(CONFIG_HS7751RVOIP_CODEC) + ctrl_outb(value, port); else if (codec_port(port)) - *(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value; -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(unsigned char *)PCI_IOMAP(port) = value; + ctrl_outb(value, CODEC_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); else - *(volatile unsigned short *)port2adr(port) = value; + ctrl_outb(value, port2adr(port)); } void hs7751rvoip_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) - *(volatile unsigned char *)port = value; -#if defined(CONFIG_HS7751RVOIP_CODEC) + ctrl_outb(value, port); else if (codec_port(port)) - *(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value; -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(unsigned char *)PCI_IOMAP(port) = value; + ctrl_outb(value, CODEC_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); else - *(volatile unsigned short *)port2adr(port) = value; - delay(); + ctrl_outw(value, port2adr(port)); + + ctrl_delay(); } void hs7751rvoip_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(unsigned short *)PCI_IOMAP(port) = value; + ctrl_outw(value, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outw(value, pci_ioaddr(port)); else - maybebadio(outw, port); + maybebadio(port); } void hs7751rvoip_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *((unsigned long *)PCI_IOMAP(port)) = value; + ctrl_outl(value, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outl(value, pci_ioaddr(port)); else - maybebadio(outl, port); + maybebadio(port); } void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count) { + u8 *buf = addr; + if (PXSEG(port)) - while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port; -#if defined(CONFIG_HS7751RVOIP_CODEC) + while (count--) + *buf++ = ctrl_inb(port); else if (codec_port(port)) - while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile __u8 *bp = (__u8 *)PCI_IOMAP(port); + while (count--) + *buf++ = ctrl_inb(CODEC_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); - while (count--) *((volatile unsigned char *) addr)++ = *bp; + while (count--) + *buf++ = *bp; } else { - volatile __u16 *p = (volatile unsigned short *)port2adr(port); + volatile u16 *p = (volatile u16 *)port2adr(port); - while (count--) *((unsigned char *) addr)++ = *p & 0xff; + while (count--) + *buf++ = *p & 0xff; } } void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count) { - volatile __u16 *p; + volatile u16 *p; + u16 *buf = addr; if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile unsigned short *)PCI_IOMAP(port); + p = (volatile u16 *)port; + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile unsigned short *)port2adr(port); - while (count--) *((__u16 *) addr)++ = *p; + p = (volatile u16 *)port2adr(port); + while (count--) + *buf++ = *p; } void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count) { - if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile __u32 *p = (__u32 *)PCI_IOMAP(port); - while (count--) *((__u32 *) addr)++ = *p; + if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + u32 *buf = addr; + + while (count--) + *buf++ = *p; } else - maybebadio(insl, port); + maybebadio(port); } void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count) { + const u8 *buf = addr; + if (PXSEG(port)) - while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++; -#if defined(CONFIG_HS7751RVOIP_CODEC) + while (count--) + ctrl_outb(*buf++, port); else if (codec_port(port)) - while (count--) *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = *((unsigned char *) addr)++; -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile __u8 *bp = (__u8 *)PCI_IOMAP(port); + while (count--) + ctrl_outb(*buf++, CODEC_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); - while (count--) *bp = *((volatile unsigned char *) addr)++; + while (count--) + *bp = *buf++; } else { - volatile __u16 *p = (volatile unsigned short *)port2adr(port); + volatile u16 *p = (volatile u16 *)port2adr(port); - while (count--) *p = *((unsigned char *) addr)++; + while (count--) + *p = *buf++; } } void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count) { - volatile __u16 *p; + volatile u16 *p; + const u16 *buf = addr; if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile unsigned short *)PCI_IOMAP(port); + p = (volatile u16 *)port; + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile unsigned short *)port2adr(port); - while (count--) *p = *((__u16 *) addr)++; + p = (volatile u16 *)port2adr(port); + + while (count--) + *p = *buf++; } void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count) { - if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile __u32 *p = (__u32 *)PCI_IOMAP(port); + const u32 *buf = addr; - while (count--) *p = *((__u32 *) addr)++; + if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + + while (count--) + *p = *buf++; } else - maybebadio(outsl, port); + maybebadio(port); } -void *hs7751rvoip_ioremap(unsigned long offset, unsigned long size) +void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size) { - if (offset >= 0xfd000000) - return (void *)offset; - else - return (void *)P2SEGADDR(offset); -} -EXPORT_SYMBOL(hs7751rvoip_ioremap); + if (PXSEG(port)) + return (void __iomem *)port; + else if (unlikely(codec_port(port) && (size == 1))) + return (void __iomem *)CODEC_IOMAP(port); + else if (is_pci_ioaddr(port)) + return (void __iomem *)pci_ioaddr(port); -unsigned long hs7751rvoip_isa_port2addr(unsigned long offset) -{ - return port2adr(offset); + return (void __iomem *)port2adr(port); } diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index 705b7ddcb0d..c617b188258 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -35,30 +35,24 @@ static unsigned int startup_hs7751rvoip_irq(unsigned int irq) static void disable_hs7751rvoip_irq(unsigned int irq) { - unsigned long flags; unsigned short val; unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); /* Set the priority in IPR to 0 */ - local_irq_save(flags); val = ctrl_inw(IRLCNTR3); val &= mask; ctrl_outw(val, IRLCNTR3); - local_irq_restore(flags); } static void enable_hs7751rvoip_irq(unsigned int irq) { - unsigned long flags; unsigned short val; unsigned short value = (0x0001 << mask_pos[irq]); /* Set priority in IPR back to original value */ - local_irq_save(flags); val = ctrl_inw(IRLCNTR3); val |= value; ctrl_outw(val, IRLCNTR3); - local_irq_restore(flags); } static void ack_hs7751rvoip_irq(unsigned int irq) diff --git a/arch/sh/boards/renesas/hs7751rvoip/led.c b/arch/sh/boards/renesas/hs7751rvoip/led.c deleted file mode 100644 index b6608fff9f3..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/led.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/sh/kernel/setup_hs7751rvoip.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Renesas Technology Sales HS7751RVoIP Support. - * - * Modified for HS7751RVoIP by - * Atom Create Engineering Co., Ltd. 2002. - * Lineo uSolutions, Inc. 2003. - */ - -#include <asm/io.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> - -extern unsigned int debug_counter; - -void debug_led_disp(void) -{ - unsigned short value; - - value = (unsigned char)debug_counter++; - ctrl_outb((0xf0|value), PA_OUTPORTR); - if (value == 0x0f) - debug_counter = 0; -} diff --git a/arch/sh/boards/renesas/hs7751rvoip/mach.c b/arch/sh/boards/renesas/hs7751rvoip/mach.c deleted file mode 100644 index caf967f77c6..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/mach.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_hs7751rvoip.c - * - * Minor tweak of mach_se.c file to reference hs7751rvoip-specific items. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Renesas Technology sales HS7751RVoIP - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/irq.h> -#include <asm/hs7751rvoip/io.h> - -extern void init_hs7751rvoip_IRQ(void); -extern void *hs7751rvoip_ioremap(unsigned long, unsigned long); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_hs7751rvoip __initmv = { - .mv_nr_irqs = 72, - - .mv_inb = hs7751rvoip_inb, - .mv_inw = hs7751rvoip_inw, - .mv_inl = hs7751rvoip_inl, - .mv_outb = hs7751rvoip_outb, - .mv_outw = hs7751rvoip_outw, - .mv_outl = hs7751rvoip_outl, - - .mv_inb_p = hs7751rvoip_inb_p, - .mv_inw_p = hs7751rvoip_inw, - .mv_inl_p = hs7751rvoip_inl, - .mv_outb_p = hs7751rvoip_outb_p, - .mv_outw_p = hs7751rvoip_outw, - .mv_outl_p = hs7751rvoip_outl, - - .mv_insb = hs7751rvoip_insb, - .mv_insw = hs7751rvoip_insw, - .mv_insl = hs7751rvoip_insl, - .mv_outsb = hs7751rvoip_outsb, - .mv_outsw = hs7751rvoip_outsw, - .mv_outsl = hs7751rvoip_outsl, - - .mv_ioremap = hs7751rvoip_ioremap, - .mv_isa_port2addr = hs7751rvoip_isa_port2addr, - .mv_init_irq = init_hs7751rvoip_IRQ, -}; -ALIAS_MV(hs7751rvoip) diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index 29fb5ff70fb..0414c15c345 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -1,44 +1,38 @@ /* - * linux/arch/sh/kernel/setup_hs7751rvoip.c + * Renesas Technology Sales HS7751RVoIP Support. * * Copyright (C) 2000 Kazumoto Kojima * - * Renesas Technology Sales HS7751RVoIP Support. - * * Modified for HS7751RVoIP by * Atom Create Engineering Co., Ltd. 2002. * Lineo uSolutions, Inc. 2003. */ - #include <linux/init.h> #include <linux/irq.h> - +#include <linux/mm.h> +#include <linux/vmalloc.h> #include <linux/hdreg.h> #include <linux/ide.h> +#include <linux/pm.h> #include <asm/io.h> #include <asm/hs7751rvoip/hs7751rvoip.h> +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/irq.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> - -/* defined in mm/ioremap.c */ -extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); - -unsigned int debug_counter; - -const char *get_system_type(void) +static void __init hs7751rvoip_init_irq(void) { - return "HS7751RVoIP"; +#if defined(CONFIG_HS7751RVOIP_CODEC) + make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); +#endif + + init_hs7751rvoip_IRQ(); } -/* - * Initialize the board - */ -void __init platform_setup(void) +static void hs7751rvoip_power_off(void) { - printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); - ctrl_outb(0xf0, PA_OUTPORTR); - debug_counter = 0; + ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR); } void *area5_io8_base; @@ -46,16 +40,15 @@ void *area6_io8_base; void *area5_io16_base; void *area6_io16_base; -int __init cf_init(void) +static int __init hs7751rvoip_cf_init(void) { pgprot_t prot; - unsigned long paddrbase, psize; + unsigned long paddrbase; /* open I/O area window */ paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800)); - psize = PAGE_SIZE; prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16); - area5_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot); + area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); if (!area5_io16_base) { printk("allocate_cf_area : can't open CF I/O window!\n"); return -ENOMEM; @@ -64,19 +57,18 @@ int __init cf_init(void) /* XXX : do we need attribute and common-memory area also? */ paddrbase = virt_to_phys((void *)PA_AREA6_IO); - psize = PAGE_SIZE; #if defined(CONFIG_HS7751RVOIP_CODEC) prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8); #else prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8); #endif - area6_io8_base = p3_ioremap(paddrbase, psize, prot.pgprot); + area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); if (!area6_io8_base) { printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n"); return -ENOMEM; } prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16); - area6_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot); + area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); if (!area6_io16_base) { printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n"); return -ENOMEM; @@ -85,4 +77,46 @@ int __init cf_init(void) return 0; } -__initcall (cf_init); +/* + * Initialize the board + */ +static void __init hs7751rvoip_setup(char **cmdline_p) +{ + device_initcall(hs7751rvoip_cf_init); + + ctrl_outb(0xf0, PA_OUTPORTR); + pm_power_off = hs7751rvoip_power_off; + + printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); +} + +struct sh_machine_vector mv_hs7751rvoip __initmv = { + .mv_name = "HS7751RVoIP", + .mv_setup = hs7751rvoip_setup, + .mv_nr_irqs = 72, + + .mv_inb = hs7751rvoip_inb, + .mv_inw = hs7751rvoip_inw, + .mv_inl = hs7751rvoip_inl, + .mv_outb = hs7751rvoip_outb, + .mv_outw = hs7751rvoip_outw, + .mv_outl = hs7751rvoip_outl, + + .mv_inb_p = hs7751rvoip_inb_p, + .mv_inw_p = hs7751rvoip_inw, + .mv_inl_p = hs7751rvoip_inl, + .mv_outb_p = hs7751rvoip_outb_p, + .mv_outw_p = hs7751rvoip_outw, + .mv_outl_p = hs7751rvoip_outl, + + .mv_insb = hs7751rvoip_insb, + .mv_insw = hs7751rvoip_insw, + .mv_insl = hs7751rvoip_insl, + .mv_outsb = hs7751rvoip_outsb, + .mv_outsw = hs7751rvoip_outsw, + .mv_outsl = hs7751rvoip_outsl, + + .mv_init_irq = hs7751rvoip_init_irq, + .mv_ioport_map = hs7751rvoip_ioport_map, +}; +ALIAS_MV(hs7751rvoip) diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig new file mode 100644 index 00000000000..c26d9813d23 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/Kconfig @@ -0,0 +1,14 @@ +if SH_R7780RP + +menu "R7780RP options" + +config SH_R7780MP + bool "R7780MP board support" + default y + help + Selecting this option will enable support for the mass-production + version of the R7780RP. If in doubt, say Y. + +endmenu + +endif diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile new file mode 100644 index 00000000000..f1776d02797 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the R7780RP-1 specific parts of the kernel +# + +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c new file mode 100644 index 00000000000..db92d6e6ae9 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -0,0 +1,301 @@ +/* + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Renesas Solutions Highlander R7780RP-1 + * + * Initial version only to support LAN access; some + * placeholder code from io_r7780rp.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/r7780rp/r7780rp.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +static inline unsigned long port2adr(unsigned int port) +{ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + if (port == 0x3f6) + return (PA_AREA5_IO + 0x80c); + else + return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); + else + maybebadio((unsigned long)port); + + return port; +} + +static inline unsigned long port88796l(unsigned int port, int flag) +{ + unsigned long addr; + + if (flag) + addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); + else + addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; + + return addr; +} + +/* The 7780 R7780RP-1 seems to have everything hooked */ +/* up pretty normally (nothing on high-bytes only...) so this */ +/* shouldn't be needed */ +static inline int shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} + +#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) +#define CHECK_AX88796L_PORT(port) \ + ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) +#else +#define CHECK_AX88796L_PORT(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +u8 r7780rp_inb(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + return ctrl_inw(port88796l(port, 0)) & 0xff; + else if (PXSEG(port)) + return ctrl_inb(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inb(pci_ioaddr(port)); + + return ctrl_inw(port2adr(port)) & 0xff; +} + +u8 r7780rp_inb_p(unsigned long port) +{ + u8 v; + + if (CHECK_AX88796L_PORT(port)) + v = ctrl_inw(port88796l(port, 0)) & 0xff; + else if (PXSEG(port)) + v = ctrl_inb(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + v = ctrl_inb(pci_ioaddr(port)); + else + v = ctrl_inw(port2adr(port)) & 0xff; + + ctrl_delay(); + + return v; +} + +u16 r7780rp_inw(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + return ctrl_inw(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inw(pci_ioaddr(port)); + else + maybebadio(port); + + return 0; +} + +u32 r7780rp_inl(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + return ctrl_inl(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inl(pci_ioaddr(port)); + else + maybebadio(port); + + return 0; +} + +void r7780rp_outb(u8 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + ctrl_outw(value, port88796l(port, 0)); + else if (PXSEG(port)) + ctrl_outb(value, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); + else + ctrl_outw(value, port2adr(port)); +} + +void r7780rp_outb_p(u8 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + ctrl_outw(value, port88796l(port, 0)); + else if (PXSEG(port)) + ctrl_outb(value, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); + else + ctrl_outw(value, port2adr(port)); + + ctrl_delay(); +} + +void r7780rp_outw(u16 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + ctrl_outw(value, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outw(value, pci_ioaddr(port)); + else + maybebadio(port); +} + +void r7780rp_outl(u32 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + ctrl_outl(value, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outl(value, pci_ioaddr(port)); + else + maybebadio(port); +} + +void r7780rp_insb(unsigned long port, void *dst, unsigned long count) +{ + volatile u16 *p; + u8 *buf = dst; + + if (CHECK_AX88796L_PORT(port)) { + p = (volatile u16 *)port88796l(port, 0); + while (count--) + *buf++ = *p & 0xff; + } else if (PXSEG(port)) { + while (count--) + *buf++ = *(volatile u8 *)port; + } else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); + + while (count--) + *buf++ = *bp; + } else { + p = (volatile u16 *)port2adr(port); + while (count--) + *buf++ = *p & 0xff; + } +} + +void r7780rp_insw(unsigned long port, void *dst, unsigned long count) +{ + volatile u16 *p; + u16 *buf = dst; + + if (CHECK_AX88796L_PORT(port)) + p = (volatile u16 *)port88796l(port, 1); + else if (PXSEG(port)) + p = (volatile u16 *)port; + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); + else + p = (volatile u16 *)port2adr(port); + + while (count--) + *buf++ = *p; +} + +void r7780rp_insl(unsigned long port, void *dst, unsigned long count) +{ + u32 *buf = dst; + + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + + while (count--) + *buf++ = *p; + } else + maybebadio(port); +} + +void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) +{ + volatile u16 *p; + const u8 *buf = src; + + if (CHECK_AX88796L_PORT(port)) { + p = (volatile u16 *)port88796l(port, 0); + while (count--) + *p = *buf++; + } else if (PXSEG(port)) + while (count--) + ctrl_outb(*buf++, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); + + while (count--) + *bp = *buf++; + } else { + p = (volatile u16 *)port2adr(port); + while (count--) + *p = *buf++; + } +} + +void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) +{ + volatile u16 *p; + const u16 *buf = src; + + if (CHECK_AX88796L_PORT(port)) + p = (volatile u16 *)port88796l(port, 1); + else if (PXSEG(port)) + p = (volatile u16 *)port; + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); + else + p = (volatile u16 *)port2adr(port); + + while (count--) + *p = *buf++; +} + +void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) +{ + const u32 *buf = src; + + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + + while (count--) + *p = *buf++; + } else + maybebadio(port); +} + +void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) +{ + if (CHECK_AX88796L_PORT(port)) + return (void __iomem *)port88796l(port, size > 1); + else if (PXSEG(port)) + return (void __iomem *)port; + else if (is_pci_ioaddr(port) || shifted_port(port)) + return (void __iomem *)pci_ioaddr(port); + + return (void __iomem *)port2adr(port); +} diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c new file mode 100644 index 00000000000..61d5e5d3c29 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -0,0 +1,117 @@ +/* + * linux/arch/sh/boards/renesas/r7780rp/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Solutions Highlander R7780RP-1 Support. + * + * Modified for R7780RP-1 by + * Atom Create Engineering Co., Ltd. 2002. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/r7780rp/r7780rp.h> + +#ifdef CONFIG_SH_R7780MP +static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; +#else +static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; +#endif + +static void enable_r7780rp_irq(unsigned int irq); +static void disable_r7780rp_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_r7780rp_irq disable_r7780rp_irq + +static void ack_r7780rp_irq(unsigned int irq); +static void end_r7780rp_irq(unsigned int irq); + +static unsigned int startup_r7780rp_irq(unsigned int irq) +{ + enable_r7780rp_irq(irq); + return 0; /* never anything pending */ +} + +static void disable_r7780rp_irq(unsigned int irq) +{ + unsigned short val; + unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); + + /* Set the priority in IPR to 0 */ + val = ctrl_inw(IRLCNTR1); + val &= mask; + ctrl_outw(val, IRLCNTR1); +} + +static void enable_r7780rp_irq(unsigned int irq) +{ + unsigned short val; + unsigned short value = (0x0001 << mask_pos[irq]); + + /* Set priority in IPR back to original value */ + val = ctrl_inw(IRLCNTR1); + val |= value; + ctrl_outw(val, IRLCNTR1); +} + +static void ack_r7780rp_irq(unsigned int irq) +{ + disable_r7780rp_irq(irq); +} + +static void end_r7780rp_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_r7780rp_irq(irq); +} + +static struct hw_interrupt_type r7780rp_irq_type = { + .typename = "R7780RP-IRQ", + .startup = startup_r7780rp_irq, + .shutdown = shutdown_r7780rp_irq, + .enable = enable_r7780rp_irq, + .disable = disable_r7780rp_irq, + .ack = ack_r7780rp_irq, + .end = end_r7780rp_irq, +}; + +static void make_r7780rp_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &r7780rp_irq_type; + disable_r7780rp_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_r7780rp_IRQ(void) +{ + int i; + + /* IRL0=PCI Slot #A + * IRL1=PCI Slot #B + * IRL2=PCI Slot #C + * IRL3=PCI Slot #D + * IRL4=CF Card + * IRL5=CF Card Insert + * IRL6=M66596 + * IRL7=SD Card + * IRL8=Touch Panel + * IRL9=SCI + * IRL10=Serial + * IRL11=Extention #A + * IRL11=Extention #B + * IRL12=Debug LAN + * IRL13=Push Switch + * IRL14=ZiggBee IO + */ + + for (i=0; i<15; i++) + make_r7780rp_irq(i); +} diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c new file mode 100644 index 00000000000..9f02766b6f5 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/led.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) Atom Create Engineering Co., Ltd. + * + * May be copied or modified under the terms of GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/r7780rp/r7780rp.h> + +/* Cycle the LED's in the clasic Knightriger/Sun pattern */ +void heartbeat_r7780rp(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *)PA_OBLED; + static unsigned bit = 0, up = 1; + unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7}; + + cnt += 1; + if (cnt < period) + return; + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 + */ + period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); + + *p = 1 << bit_pos[bit]; + if (up) + if (bit == 7) { + bit--; + up = 0; + } else + bit++; + else if (bit == 0) + up = 1; + else + bit--; +} diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c new file mode 100644 index 00000000000..b941aa0aa34 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -0,0 +1,163 @@ +/* + * arch/sh/boards/renesas/r7780rp/setup.c + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005, 2006 Paul Mundt + * + * Renesas Solutions Highlander R7780RP-1 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/r7780rp/r7780rp.h> +#include <asm/clock.h> +#include <asm/io.h> + +extern void heartbeat_r7780rp(void); +extern void init_r7780rp_IRQ(void); + +static struct resource m66596_usb_host_resources[] = { + [0] = { + .start = 0xa4800000, + .end = 0xa4ffffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 6, /* irq number */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66596_usb_host_device = { + .name = "m66596-hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(m66596_usb_host_resources), + .resource = m66596_usb_host_resources, +}; + +static struct platform_device *r7780rp_devices[] __initdata = { + &m66596_usb_host_device, +}; + +static int __init r7780rp_devices_setup(void) +{ + return platform_add_devices(r7780rp_devices, + ARRAY_SIZE(r7780rp_devices)); +} + +/* + * Platform specific clocks + */ +static void ivdr_clk_enable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL); +} + +static void ivdr_clk_disable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL); +} + +static struct clk_ops ivdr_clk_ops = { + .enable = ivdr_clk_enable, + .disable = ivdr_clk_disable, +}; + +static struct clk ivdr_clk = { + .name = "ivdr_clk", + .ops = &ivdr_clk_ops, +}; + +static struct clk *r7780rp_clocks[] = { + &ivdr_clk, +}; + +static void r7780rp_power_off(void) +{ +#ifdef CONFIG_SH_R7780MP + ctrl_outw(0x0001, PA_POFF); +#endif +} + +/* + * Initialize the board + */ +static void __init r7780rp_setup(char **cmdline_p) +{ + u16 ver = ctrl_inw(PA_VERREG); + int i; + + device_initcall(r7780rp_devices_setup); + + printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n"); + + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d)\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf); + + /* + * Enable the important clocks right away.. + */ + for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { + struct clk *clk = r7780rp_clocks[i]; + + clk_register(clk); + clk_enable(clk); + } + + ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ +#ifndef CONFIG_SH_R7780MP + ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ +#endif + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */ + + pm_power_off = r7780rp_power_off; +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_r7780rp __initmv = { + .mv_name = "Highlander R7780RP-1", + .mv_setup = r7780rp_setup, + + .mv_nr_irqs = 109, + + .mv_inb = r7780rp_inb, + .mv_inw = r7780rp_inw, + .mv_inl = r7780rp_inl, + .mv_outb = r7780rp_outb, + .mv_outw = r7780rp_outw, + .mv_outl = r7780rp_outl, + + .mv_inb_p = r7780rp_inb_p, + .mv_inw_p = r7780rp_inw, + .mv_inl_p = r7780rp_inl, + .mv_outb_p = r7780rp_outb_p, + .mv_outw_p = r7780rp_outw, + .mv_outl_p = r7780rp_outl, + + .mv_insb = r7780rp_insb, + .mv_insw = r7780rp_insw, + .mv_insl = r7780rp_insl, + .mv_outsb = r7780rp_outsb, + .mv_outsw = r7780rp_outsw, + .mv_outsl = r7780rp_outsl, + + .mv_ioport_map = r7780rp_ioport_map, + .mv_init_irq = init_r7780rp_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_r7780rp, +#endif +}; +ALIAS_MV(r7780rp) diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/renesas/rts7751r2d/Kconfig new file mode 100644 index 00000000000..7780d1fb13f --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/Kconfig @@ -0,0 +1,12 @@ +if SH_RTS7751R2D + +menu "RTS7751R2D options" + +config RTS7751R2D_REV11 + bool "RTS7751R2D Rev. 1.1 board support" + help + Selecting this option will support version rev. 1.1. +endmenu + +endif + diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index daa53334bdc..686fc9ea598 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -1,10 +1,6 @@ # # Makefile for the RTS7751R2D specific parts of the kernel # -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# - -obj-y := mach.o setup.o io.o irq.o led.o +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c index 123abbbc91e..135aa0b5e62 100644 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ b/arch/sh/boards/renesas/rts7751r2d/io.c @@ -1,6 +1,4 @@ /* - * linux/arch/sh/kernel/io_rts7751r2d.c - * * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,17 +8,13 @@ * placeholder code from io_rts7751r2d.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> -#include <asm/io.h> +#include <linux/pci.h> #include <asm/rts7751r2d/rts7751r2d.h> +#include <asm/io.h> #include <asm/addrspace.h> -#include <linux/module.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - /* * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC) * of the 7751R processor, and has a SuperIO accessible via the PCI. @@ -28,22 +22,6 @@ * like the other Solution Engine boards. */ -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline unsigned long port2adr(unsigned int port) { if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) @@ -52,7 +30,7 @@ static inline unsigned long port2adr(unsigned int port) else return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); else - maybebadio(port2adr, (unsigned long)port); + maybebadio((unsigned long)port); return port; } @@ -81,17 +59,6 @@ static inline int shifted_port(unsigned long port) return 1; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -112,8 +79,8 @@ unsigned char rts7751r2d_inb(unsigned long port) return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; else if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else return (*(volatile unsigned short *)port2adr(port) & 0xff); } @@ -126,11 +93,12 @@ unsigned char rts7751r2d_inb_p(unsigned long port) v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; else if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else v = (*(volatile unsigned short *)port2adr(port) & 0xff); - delay(); + + ctrl_delay(); return v; } @@ -138,13 +106,13 @@ unsigned char rts7751r2d_inb_p(unsigned long port) unsigned short rts7751r2d_inw(unsigned long port) { if (CHECK_AX88796L_PORT(port)) - maybebadio(inw, port); + maybebadio(port); else if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } @@ -152,13 +120,13 @@ unsigned short rts7751r2d_inw(unsigned long port) unsigned int rts7751r2d_inl(unsigned long port) { if (CHECK_AX88796L_PORT(port)) - maybebadio(inl, port); + maybebadio(port); else if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned long *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return *(volatile unsigned long *)pci_ioaddr(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -169,8 +137,8 @@ void rts7751r2d_outb(unsigned char value, unsigned long port) *((volatile unsigned short *)port88796l(port, 0)) = value; else if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned char *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned char *)pci_ioaddr(port) = value; else *(volatile unsigned short *)port2adr(port) = value; } @@ -181,143 +149,152 @@ void rts7751r2d_outb_p(unsigned char value, unsigned long port) *((volatile unsigned short *)port88796l(port, 0)) = value; else if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned char *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned char *)pci_ioaddr(port) = value; else *(volatile unsigned short *)port2adr(port) = value; - delay(); + + ctrl_delay(); } void rts7751r2d_outw(unsigned short value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) - maybebadio(outw, port); + maybebadio(port); else if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned short *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned short *)pci_ioaddr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void rts7751r2d_outl(unsigned int value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) - maybebadio(outl, port); + maybebadio(port); else if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned long *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned long *)pci_ioaddr(port) = value; else - maybebadio(outl, port); + maybebadio(port); } void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) { + unsigned long a = (unsigned long)addr; volatile __u8 *bp; volatile __u16 *p; - unsigned char *s = addr; if (CHECK_AX88796L_PORT(port)) { p = (volatile unsigned short *)port88796l(port, 0); - while (count--) *s++ = *p & 0xff; + while (count--) + ctrl_outb(*p & 0xff, a++); } else if (PXSEG(port)) - while (count--) *s++ = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - bp = (__u8 *)PCI_IOMAP(port); - while (count--) *s++ = *bp; + while (count--) + ctrl_outb(ctrl_inb(port), a++); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + bp = (__u8 *)pci_ioaddr(port); + while (count--) + ctrl_outb(*bp, a++); } else { p = (volatile unsigned short *)port2adr(port); - while (count--) *s++ = *p & 0xff; + while (count--) + ctrl_outb(*p & 0xff, a++); } } void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) { + unsigned long a = (unsigned long)addr; volatile __u16 *p; - __u16 *s = addr; if (CHECK_AX88796L_PORT(port)) p = (volatile unsigned short *)port88796l(port, 1); else if (PXSEG(port)) p = (volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile unsigned short *)pci_ioaddr(port); else p = (volatile unsigned short *)port2adr(port); - while (count--) *s++ = *p; + while (count--) + ctrl_outw(*p, a++); } void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) { if (CHECK_AX88796L_PORT(port)) - maybebadio(insl, port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile __u32 *p = (__u32 *)PCI_IOMAP(port); - __u32 *s = addr; - - while (count--) *s++ = *p; + maybebadio(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + unsigned long a = (unsigned long)addr; + + while (count--) { + ctrl_outl(ctrl_inl(pci_ioaddr(port)), a); + a += 4; + } } else - maybebadio(insl, port); + maybebadio(port); } void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) { + unsigned long a = (unsigned long)addr; volatile __u8 *bp; volatile __u16 *p; - const __u8 *s = addr; if (CHECK_AX88796L_PORT(port)) { p = (volatile unsigned short *)port88796l(port, 0); - while (count--) *p = *s++; + while (count--) + *p = ctrl_inb(a++); } else if (PXSEG(port)) - while (count--) *(volatile unsigned char *)port = *s++; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - bp = (__u8 *)PCI_IOMAP(port); - while (count--) *bp = *s++; + while (count--) + ctrl_outb(a++, port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + bp = (__u8 *)pci_ioaddr(port); + while (count--) + *bp = ctrl_inb(a++); } else { p = (volatile unsigned short *)port2adr(port); - while (count--) *p = *s++; + while (count--) + *p = ctrl_inb(a++); } } void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) { + unsigned long a = (unsigned long)addr; volatile __u16 *p; - const __u16 *s = addr; if (CHECK_AX88796L_PORT(port)) p = (volatile unsigned short *)port88796l(port, 1); else if (PXSEG(port)) p = (volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile unsigned short *)pci_ioaddr(port); else p = (volatile unsigned short *)port2adr(port); - while (count--) *p = *s++; + + while (count--) { + ctrl_outw(*p, a); + a += 2; + } } void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) { if (CHECK_AX88796L_PORT(port)) - maybebadio(outsl, port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile __u32 *p = (__u32 *)PCI_IOMAP(port); - const __u32 *s = addr; - - while (count--) *p = *s++; + maybebadio(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + unsigned long a = (unsigned long)addr; + + while (count--) { + ctrl_outl(ctrl_inl(a), pci_ioaddr(port)); + a += 4; + } } else - maybebadio(outsl, port); -} - -void *rts7751r2d_ioremap(unsigned long offset, unsigned long size) -{ - if (offset >= 0xfd000000) - return (void *)offset; - else - return (void *)P2SEGADDR(offset); + maybebadio(port); } -EXPORT_SYMBOL(rts7751r2d_ioremap); unsigned long rts7751r2d_isa_port2addr(unsigned long offset) { diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 154535440bb..c915e7a3693 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -41,30 +41,24 @@ static unsigned int startup_rts7751r2d_irq(unsigned int irq) static void disable_rts7751r2d_irq(unsigned int irq) { - unsigned long flags; unsigned short val; unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); /* Set the priority in IPR to 0 */ - local_irq_save(flags); val = ctrl_inw(IRLCNTR1); val &= mask; ctrl_outw(val, IRLCNTR1); - local_irq_restore(flags); } static void enable_rts7751r2d_irq(unsigned int irq) { - unsigned long flags; unsigned short val; unsigned short value = (0x0001 << mask_pos[irq]); /* Set priority in IPR back to original value */ - local_irq_save(flags); val = ctrl_inw(IRLCNTR1); val |= value; ctrl_outw(val, IRLCNTR1); - local_irq_restore(flags); } int rts7751r2d_irq_demux(int irq) diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c index 4d16de71fac..e14a13d12d4 100644 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ b/arch/sh/boards/renesas/rts7751r2d/led.c @@ -12,8 +12,6 @@ #include <asm/io.h> #include <asm/rts7751r2d/rts7751r2d.h> -extern unsigned int debug_counter; - #ifdef CONFIG_HEARTBEAT #include <linux/sched.h> @@ -55,12 +53,3 @@ void rts7751r2d_led(unsigned short value) ctrl_outw(value, PA_OUTPORT); } -void debug_led_disp(void) -{ - unsigned short value; - - value = (unsigned short)debug_counter++; - rts7751r2d_led(value); - if (value == 0xff) - debug_counter = 0; -} diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c deleted file mode 100644 index 5ed9e97ea19..00000000000 --- a/arch/sh/boards/renesas/rts7751r2d/mach.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_rts7751r2d.c - * - * Minor tweak of mach_se.c file to reference rts7751r2d-specific items. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Renesas Technology sales RTS7751R2D - */ - -#include <linux/init.h> -#include <linux/types.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/irq.h> -#include <asm/rts7751r2d/io.h> - -extern void heartbeat_rts7751r2d(void); -extern void init_rts7751r2d_IRQ(void); -extern void *rts7751r2d_ioremap(unsigned long, unsigned long); -extern int rts7751r2d_irq_demux(int irq); - -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_rts7751r2d __initmv = { - .mv_nr_irqs = 72, - - .mv_inb = rts7751r2d_inb, - .mv_inw = rts7751r2d_inw, - .mv_inl = rts7751r2d_inl, - .mv_outb = rts7751r2d_outb, - .mv_outw = rts7751r2d_outw, - .mv_outl = rts7751r2d_outl, - - .mv_inb_p = rts7751r2d_inb_p, - .mv_inw_p = rts7751r2d_inw, - .mv_inl_p = rts7751r2d_inl, - .mv_outb_p = rts7751r2d_outb_p, - .mv_outw_p = rts7751r2d_outw, - .mv_outl_p = rts7751r2d_outl, - - .mv_insb = rts7751r2d_insb, - .mv_insw = rts7751r2d_insw, - .mv_insl = rts7751r2d_insl, - .mv_outsb = rts7751r2d_outsb, - .mv_outsw = rts7751r2d_outsw, - .mv_outsl = rts7751r2d_outsl, - - .mv_ioremap = rts7751r2d_ioremap, - .mv_isa_port2addr = rts7751r2d_isa_port2addr, - .mv_init_irq = init_rts7751r2d_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_rts7751r2d, -#endif - .mv_irq_demux = rts7751r2d_irq_demux, - -#ifdef CONFIG_USB_OHCI_HCD - .mv_consistent_alloc = voyagergx_consistent_alloc, - .mv_consistent_free = voyagergx_consistent_free, -#endif -}; -ALIAS_MV(rts7751r2d) diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 2587fd1a024..20597a6e670 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -1,31 +1,142 @@ /* - * linux/arch/sh/kernel/setup_rts7751r2d.c - * - * Copyright (C) 2000 Kazumoto Kojima - * * Renesas Technology Sales RTS7751R2D Support. * - * Modified for RTS7751R2D by - * Atom Create Engineering Co., Ltd. 2002. + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/pm.h> #include <asm/io.h> -#include <asm/rts7751r2d/rts7751r2d.h> +#include <asm/machvec.h> +#include <asm/mach/rts7751r2d.h> +#include <asm/voyagergx.h> + +extern void heartbeat_rts7751r2d(void); +extern void init_rts7751r2d_IRQ(void); +extern int rts7751r2d_irq_demux(int irq); + +extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); +extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); + +static struct plat_serial8250_port uart_platform_data[] = { + { + .membase = (void *)VOYAGER_UART_BASE, + .mapbase = VOYAGER_UART_BASE, + .iotype = UPIO_MEM, + .irq = VOYAGER_UART0_IRQ, + .flags = UPF_BOOT_AUTOCONF, + .regshift = 2, + .uartclk = (9600 * 16), + }, { + .flags = 0, + }, +}; + +static void __init voyagergx_serial_init(void) +{ + unsigned long val; + + /* + * GPIO Control + */ + val = inl(GPIO_MUX_HIGH); + val |= 0x00001fe0; + outl(val, GPIO_MUX_HIGH); + + /* + * Power Mode Gate + */ + val = inl(POWER_MODE0_GATE); + val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); + outl(val, POWER_MODE0_GATE); + + val = inl(POWER_MODE1_GATE); + val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); + outl(val, POWER_MODE1_GATE); +} + +static struct platform_device uart_device = { + .name = "serial8250", + .id = -1, + .dev = { + .platform_data = uart_platform_data, + }, +}; + +static struct platform_device *rts7751r2d_devices[] __initdata = { + &uart_device, +}; -unsigned int debug_counter; +static int __init rts7751r2d_devices_setup(void) +{ + return platform_add_devices(rts7751r2d_devices, + ARRAY_SIZE(rts7751r2d_devices)); +} -const char *get_system_type(void) +static void rts7751r2d_power_off(void) { - return "RTS7751R2D"; + ctrl_outw(0x0001, PA_POWOFF); } /* * Initialize the board */ -void __init platform_setup(void) +static void __init rts7751r2d_setup(char **cmdline_p) { - printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); + device_initcall(rts7751r2d_devices_setup); + ctrl_outw(0x0000, PA_OUTPORT); - debug_counter = 0; + pm_power_off = rts7751r2d_power_off; + + voyagergx_serial_init(); + + printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); } + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_rts7751r2d __initmv = { + .mv_name = "RTS7751R2D", + .mv_setup = rts7751r2d_setup, + .mv_nr_irqs = 72, + + .mv_inb = rts7751r2d_inb, + .mv_inw = rts7751r2d_inw, + .mv_inl = rts7751r2d_inl, + .mv_outb = rts7751r2d_outb, + .mv_outw = rts7751r2d_outw, + .mv_outl = rts7751r2d_outl, + + .mv_inb_p = rts7751r2d_inb_p, + .mv_inw_p = rts7751r2d_inw, + .mv_inl_p = rts7751r2d_inl, + .mv_outb_p = rts7751r2d_outb_p, + .mv_outw_p = rts7751r2d_outw, + .mv_outl_p = rts7751r2d_outl, + + .mv_insb = rts7751r2d_insb, + .mv_insw = rts7751r2d_insw, + .mv_insl = rts7751r2d_insl, + .mv_outsb = rts7751r2d_outsb, + .mv_outsw = rts7751r2d_outsw, + .mv_outsl = rts7751r2d_outsl, + + .mv_init_irq = init_rts7751r2d_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_rts7751r2d, +#endif + .mv_irq_demux = rts7751r2d_irq_demux, + +#ifdef CONFIG_USB_SM501 + .mv_consistent_alloc = voyagergx_consistent_alloc, + .mv_consistent_free = voyagergx_consistent_free, +#endif +}; +ALIAS_MV(rts7751r2d) diff --git a/arch/sh/boards/renesas/sh7710voipgw/Makefile b/arch/sh/boards/renesas/sh7710voipgw/Makefile new file mode 100644 index 00000000000..77037567633 --- /dev/null +++ b/arch/sh/boards/renesas/sh7710voipgw/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c new file mode 100644 index 00000000000..e57e7afab8c --- /dev/null +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -0,0 +1,109 @@ +/* + * Renesas Technology SH7710 VoIP Gateway + * + * Copyright (C) 2006 Ranjit Deshpande + * Kenati Technologies Inc. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/init.h> +#include <asm/machvec.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/irq.h> + +/* + * Initialize IRQ setting + */ +static void __init sh7710voipgw_init_irq(void) +{ + /* Disable all interrupts in IPR registers */ + ctrl_outw(0x0, INTC_IPRA); + ctrl_outw(0x0, INTC_IPRB); + ctrl_outw(0x0, INTC_IPRC); + ctrl_outw(0x0, INTC_IPRD); + ctrl_outw(0x0, INTC_IPRE); + ctrl_outw(0x0, INTC_IPRF); + ctrl_outw(0x0, INTC_IPRG); + ctrl_outw(0x0, INTC_IPRH); + ctrl_outw(0x0, INTC_IPRI); + + /* Ack all interrupt sources in the IRR0 register */ + ctrl_outb(0x3f, INTC_IRR0); + + /* Use IRQ0 - IRQ3 as active low interrupt lines i.e. disable + * IRL mode. + */ + ctrl_outw(0x2aa, INTC_ICR1); + + /* Now make IPR interrupts */ + make_ipr_irq(TIMER2_IRQ, TIMER2_IPR_ADDR, + TIMER2_IPR_POS, TIMER2_PRIORITY); + make_ipr_irq(WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY); + + /* SCIF0 */ + make_ipr_irq(SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, + SCIF0_PRIORITY); + make_ipr_irq(SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, + SCIF0_PRIORITY); + make_ipr_irq(SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, + SCIF0_PRIORITY); + make_ipr_irq(SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, + SCIF0_PRIORITY); + + /* DMAC-1 */ + make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + make_ipr_irq(DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + + /* DMAC-2 */ + make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + + /* IPSEC */ + make_ipr_irq(IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY); + + /* EDMAC */ + make_ipr_irq(EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, + EDMAC0_PRIORITY); + make_ipr_irq(EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, + EDMAC1_PRIORITY); + make_ipr_irq(EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, + EDMAC2_PRIORITY); + + /* SIOF0 */ + make_ipr_irq(SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, + SIOF0_PRIORITY); + make_ipr_irq(SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, + SIOF0_PRIORITY); + make_ipr_irq(SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, + SIOF0_PRIORITY); + make_ipr_irq(SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, + SIOF0_PRIORITY); + + /* SIOF1 */ + make_ipr_irq(SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, + SIOF1_PRIORITY); + make_ipr_irq(SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, + SIOF1_PRIORITY); + make_ipr_irq(SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, + SIOF1_PRIORITY); + make_ipr_irq(SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, + SIOF1_PRIORITY); + + /* SLIC IRQ's */ + make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); + make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_sh7710voipgw __initmv = { + .mv_name = "SH7710 VoIP Gateway", + .mv_nr_irqs = 104, + .mv_init_irq = sh7710voipgw_init_irq, +}; +ALIAS_MV(sh7710voipgw) diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c index cf979011aa9..cde6e5d192c 100644 --- a/arch/sh/boards/renesas/systemh/io.c +++ b/arch/sh/boards/renesas/systemh/io.c @@ -5,66 +5,25 @@ * Based largely on io_se.c. * * I/O routine for Hitachi 7751 Systemh. - * */ - #include <linux/kernel.h> #include <linux/types.h> -#include <asm/systemh/7751systemh.h> +#include <linux/pci.h> +#include <asm/systemh7751.h> #include <asm/addrspace.h> #include <asm/io.h> -#include <linux/pci.h> -#include "../../drivers/pci/pci-sh7751.h" - -/* - * The 7751 SystemH Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible on its memory - * bus. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) #define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area of smc lan chip*/ - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline volatile __u16 * port2adr(unsigned int port) { if (port >= 0x2000) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); -#if 0 - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -#endif - maybebadio(name,(unsigned long)port); + maybebadio((unsigned long)port); return (volatile __u16*)port; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -76,8 +35,8 @@ unsigned char sh7751systemh_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) return *(volatile unsigned char *)ETHER_IOMAP(port); else @@ -90,13 +49,13 @@ unsigned char sh7751systemh_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) v = *(volatile unsigned char *)ETHER_IOMAP(port); else v = (*port2adr(port))&0xff; - delay(); + ctrl_delay(); return v; } @@ -104,14 +63,14 @@ unsigned short sh7751systemh_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) return *(volatile unsigned int *)ETHER_IOMAP(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } @@ -119,14 +78,14 @@ unsigned int sh7751systemh_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) return *(volatile unsigned int *)ETHER_IOMAP(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -135,8 +94,8 @@ void sh7751systemh_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else @@ -147,37 +106,37 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751systemh_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else if (port <= 0x3F1) *(volatile unsigned short *)ETHER_IOMAP(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void sh7751systemh_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else - maybebadio(outl, port); + maybebadio(port); } void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count) @@ -194,7 +153,7 @@ void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count) void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count) @@ -211,73 +170,5 @@ void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long cou void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* For read/write calls, just copy generic (pass-thru); PCIMBR is */ -/* already set up. For a larger memory space, these would need to */ -/* reset PCIMBR as needed on a per-call basis... */ - -unsigned char sh7751systemh_readb(unsigned long addr) -{ - return *(volatile unsigned char*)addr; -} - -unsigned short sh7751systemh_readw(unsigned long addr) -{ - return *(volatile unsigned short*)addr; -} - -unsigned int sh7751systemh_readl(unsigned long addr) -{ - return *(volatile unsigned long*)addr; -} - -void sh7751systemh_writeb(unsigned char b, unsigned long addr) -{ - *(volatile unsigned char*)addr = b; -} - -void sh7751systemh_writew(unsigned short b, unsigned long addr) -{ - *(volatile unsigned short*)addr = b; -} - -void sh7751systemh_writel(unsigned int b, unsigned long addr) -{ - *(volatile unsigned long*)addr = b; -} - - - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -#if 0 -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); - return 0; -} -#endif - -unsigned long -sh7751systemh_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c index 8372d967f60..8d016dae233 100644 --- a/arch/sh/boards/renesas/systemh/irq.c +++ b/arch/sh/boards/renesas/systemh/irq.c @@ -15,7 +15,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/mach/7751systemh.h> +#include <asm/systemh7751.h> #include <asm/smc37c93x.h> /* address of external interrupt mask register @@ -57,12 +57,9 @@ static void shutdown_systemh_irq(unsigned int irq) static void disable_systemh_irq(unsigned int irq) { if (systemh_irq_mask_register) { - unsigned long flags; unsigned long val, mask = 0x01 << 1; /* Clear the "irq"th bit in the mask and set it in the request */ - local_irq_save(flags); - val = ctrl_inl((unsigned long)systemh_irq_mask_register); val &= ~mask; ctrl_outl(val, (unsigned long)systemh_irq_mask_register); @@ -70,23 +67,18 @@ static void disable_systemh_irq(unsigned int irq) val = ctrl_inl((unsigned long)systemh_irq_request_register); val |= mask; ctrl_outl(val, (unsigned long)systemh_irq_request_register); - - local_irq_restore(flags); } } static void enable_systemh_irq(unsigned int irq) { if (systemh_irq_mask_register) { - unsigned long flags; unsigned long val, mask = 0x01 << 1; /* Set "irq"th bit in the mask register */ - local_irq_save(flags); val = ctrl_inl((unsigned long)systemh_irq_mask_register); val |= mask; ctrl_outl(val, (unsigned long)systemh_irq_mask_register); - local_irq_restore(flags); } } diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c index 826fa3d7669..a8467bf90c2 100644 --- a/arch/sh/boards/renesas/systemh/setup.c +++ b/arch/sh/boards/renesas/systemh/setup.c @@ -15,28 +15,21 @@ * for more details. */ #include <linux/init.h> -#include <asm/mach/7751systemh.h> -#include <asm/mach/io.h> #include <asm/machvec.h> +#include <asm/systemh7751.h> extern void make_systemh_irq(unsigned int irq); -const char *get_system_type(void) -{ - return "7751 SystemH"; -} - /* * Initialize IRQ setting */ -void __init init_7751systemh_IRQ(void) +static void __init sh7751systemh_init_irq(void) { -/* make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); LAN */ -/* make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-4); */ make_systemh_irq(0xb); /* Ethernet interrupt */ } struct sh_machine_vector mv_7751systemh __initmv = { + .mv_name = "7751 SystemH", .mv_nr_irqs = 72, .mv_inb = sh7751systemh_inb, @@ -60,21 +53,6 @@ struct sh_machine_vector mv_7751systemh __initmv = { .mv_outsw = sh7751systemh_outsw, .mv_outsl = sh7751systemh_outsl, - .mv_readb = sh7751systemh_readb, - .mv_readw = sh7751systemh_readw, - .mv_readl = sh7751systemh_readl, - .mv_writeb = sh7751systemh_writeb, - .mv_writew = sh7751systemh_writew, - .mv_writel = sh7751systemh_writel, - - .mv_isa_port2addr = sh7751systemh_isa_port2addr, - - .mv_init_irq = init_7751systemh_IRQ, + .mv_init_irq = sh7751system_init_irq, }; ALIAS_MV(7751systemh) - -int __init platform_setup(void) -{ - return 0; -} - diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c index bea6c572ad8..a3a37c9aad2 100644 --- a/arch/sh/boards/saturn/setup.c +++ b/arch/sh/boards/saturn/setup.c @@ -9,22 +9,17 @@ */ #include <linux/kernel.h> #include <linux/init.h> - #include <asm/io.h> #include <asm/machvec.h> #include <asm/mach/io.h> extern int saturn_irq_demux(int irq_nr); -const char *get_system_type(void) -{ - return "Sega Saturn"; -} - /* * The Machine Vector */ struct sh_machine_vector mv_saturn __initmv = { + .mv_name = "Sega Saturn", .mv_nr_irqs = 80, /* Fix this later */ .mv_isa_port2addr = saturn_isa_port2addr, @@ -33,11 +28,4 @@ struct sh_machine_vector mv_saturn __initmv = { .mv_ioremap = saturn_ioremap, .mv_iounmap = saturn_iounmap, }; - ALIAS_MV(saturn) - -int __init platform_setup(void) -{ - return 0; -} - diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c index f449a94ddff..8a03d7a52a7 100644 --- a/arch/sh/boards/se/7300/io.c +++ b/arch/sh/boards/se/7300/io.c @@ -9,8 +9,8 @@ */ #include <linux/kernel.h> -#include <asm/mach/se7300.h> #include <asm/io.h> +#include <asm/se7300.h> #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) @@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port) badio(inw, port); } +#ifdef CONFIG_SMC91X /* MSTLANEX01 LAN at 0xb400:0000 */ static struct iop laniop = { .start = 0x300, @@ -110,6 +111,7 @@ static struct iop laniop = { .outb = simple_outb, .outw = simple_outw, }; +#endif /* NE2000 pc card NIC */ static struct iop neiop = { @@ -123,6 +125,7 @@ static struct iop neiop = { .outw = simple_outw, }; +#ifdef CONFIG_IDE /* CF in CF slot */ static struct iop cfiop = { .base = 0xb0600000, @@ -132,12 +135,13 @@ static struct iop cfiop = { .outb = pcc_outb, .outw = simple_outw, }; +#endif static __inline__ struct iop * port2iop(unsigned long port) { if (0) ; -#if defined(CONFIG_SMC91111) +#if defined(CONFIG_SMC91X) else if (laniop.check(&laniop, port)) return &laniop; #endif diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c index 216a78d1a10..ad1034f98a2 100644 --- a/arch/sh/boards/se/7300/irq.c +++ b/arch/sh/boards/se/7300/irq.c @@ -11,7 +11,7 @@ #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/mach/se7300.h> +#include <asm/se7300.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c index ad51f0a9c1e..4d03bb7774b 100644 --- a/arch/sh/boards/se/7300/led.c +++ b/arch/sh/boards/se/7300/led.c @@ -12,24 +12,10 @@ */ #include <linux/sched.h> -#include <asm/mach/se7300.h> - -static void -mach_led(int position, int value) -{ - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - - if (value) { - *p |= (1 << 8); - } else { - *p &= ~(1 << 8); - } -} - +#include <asm/se7300.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void -heartbeat_7300se(void) +void heartbeat_7300se(void) { static unsigned int cnt = 0, period = 0; volatile unsigned short *p = (volatile unsigned short *) PA_LED; diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index ebcd98d4c08..6f082a722d4 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -9,23 +9,16 @@ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> -#include <asm/mach/io.h> +#include <asm/se7300.h> void heartbeat_7300se(void); void init_7300se_IRQ(void); -const char * -get_system_type(void) -{ - return "SolutionEngine 7300"; -} - /* * The Machine Vector */ - struct sh_machine_vector mv_7300se __initmv = { + .mv_name = "SolutionEngine 7300", .mv_nr_irqs = 109, .mv_inb = sh7300se_inb, .mv_inw = sh7300se_inw, @@ -53,13 +46,4 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_heartbeat = heartbeat_7300se, #endif }; - ALIAS_MV(7300se) -/* - * Initialize the board - */ -void __init -platform_setup(void) -{ - -} diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c index 755df5ac4a4..72715575458 100644 --- a/arch/sh/boards/se/73180/io.c +++ b/arch/sh/boards/se/73180/io.c @@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port) badio(inw, port); } +#ifdef CONFIG_SMC91X /* MSTLANEX01 LAN at 0xb400:0000 */ static struct iop laniop = { .start = 0x300, @@ -110,6 +111,7 @@ static struct iop laniop = { .outb = simple_outb, .outw = simple_outw, }; +#endif /* NE2000 pc card NIC */ static struct iop neiop = { @@ -123,6 +125,7 @@ static struct iop neiop = { .outw = simple_outw, }; +#ifdef CONFIG_IDE /* CF in CF slot */ static struct iop cfiop = { .base = 0xb0600000, @@ -132,12 +135,13 @@ static struct iop cfiop = { .outb = pcc_outb, .outw = simple_outw, }; +#endif static __inline__ struct iop * port2iop(unsigned long port) { if (0) ; -#if defined(CONFIG_SMC91111) +#if defined(CONFIG_SMC91X) else if (laniop.check(&laniop, port)) return &laniop; #endif diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c index 4344d0ef24a..2c62b8ea350 100644 --- a/arch/sh/boards/se/73180/irq.c +++ b/arch/sh/boards/se/73180/irq.c @@ -7,7 +7,6 @@ * Modified for SH-Mobile SolutionEngine 73180 Support * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> * - * */ #include <linux/init.h> @@ -17,14 +16,6 @@ #include <asm/mach/se73180.h> static int -intreq2irq(int i) -{ - if (i == 5) - return 10; - return 32 + 7 - i; -} - -static int irq2intreq(int irq) { if (irq == 10) diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c index 610439fde6e..4b72e9a3ead 100644 --- a/arch/sh/boards/se/73180/led.c +++ b/arch/sh/boards/se/73180/led.c @@ -14,21 +14,8 @@ #include <linux/sched.h> #include <asm/mach/se73180.h> -static void -mach_led(int position, int value) -{ - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - - if (value) { - *p |= (1 << LED_SHIFT); - } else { - *p &= ~(1 << LED_SHIFT); - } -} - /* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void -heartbeat_73180se(void) +void heartbeat_73180se(void) { static unsigned int cnt = 0, period = 0; volatile unsigned short *p = (volatile unsigned short *) PA_LED; diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index cdb7b5f8d94..b38ef50a160 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -11,23 +11,17 @@ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> -#include <asm/mach/io.h> +#include <asm/se73180.h> +#include <asm/irq.h> void heartbeat_73180se(void); void init_73180se_IRQ(void); -const char * -get_system_type(void) -{ - return "SolutionEngine 73180"; -} - /* * The Machine Vector */ - struct sh_machine_vector mv_73180se __initmv = { + .mv_name = "SolutionEngine 73180", .mv_nr_irqs = 108, .mv_inb = sh73180se_inb, .mv_inw = sh73180se_inw, @@ -51,17 +45,9 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_outsl = sh73180se_outsl, .mv_init_irq = init_73180se_IRQ, + .mv_irq_demux = shmse_irq_demux, #ifdef CONFIG_HEARTBEAT .mv_heartbeat = heartbeat_73180se, #endif }; - ALIAS_MV(73180se) -/* - * Initialize the board - */ -void __init -platform_setup(void) -{ - -} diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile new file mode 100644 index 00000000000..4291069c0b4 --- /dev/null +++ b/arch/sh/boards/se/7343/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7343 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c new file mode 100644 index 00000000000..646661a146a --- /dev/null +++ b/arch/sh/boards/se/7343/io.c @@ -0,0 +1,275 @@ +/* + * arch/sh/boards/se/7343/io.c + * + * I/O routine for SH-Mobile3AS 7343 SolutionEngine. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/mach/se7343.h> + +#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) + +struct iop { + unsigned long start, end; + unsigned long base; + struct iop *(*check) (struct iop * p, unsigned long port); + unsigned char (*inb) (struct iop * p, unsigned long port); + unsigned short (*inw) (struct iop * p, unsigned long port); + void (*outb) (struct iop * p, unsigned char value, unsigned long port); + void (*outw) (struct iop * p, unsigned short value, unsigned long port); +}; + +struct iop * +simple_check(struct iop *p, unsigned long port) +{ + static int count; + + if (count < 100) + count++; + + port &= 0xFFFF; + + if ((p->start <= port) && (port <= p->end)) + return p; + else + badio(check, port); +} + +struct iop * +ide_check(struct iop *p, unsigned long port) +{ + if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) + return p; + return NULL; +} + +unsigned char +simple_inb(struct iop *p, unsigned long port) +{ + return *(unsigned char *) (p->base + port); +} + +unsigned short +simple_inw(struct iop *p, unsigned long port) +{ + return *(unsigned short *) (p->base + port); +} + +void +simple_outb(struct iop *p, unsigned char value, unsigned long port) +{ + *(unsigned char *) (p->base + port) = value; +} + +void +simple_outw(struct iop *p, unsigned short value, unsigned long port) +{ + *(unsigned short *) (p->base + port) = value; +} + +unsigned char +pcc_inb(struct iop *p, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + unsigned long v; + + if (port & 1) + addr += 0x00400000; + v = *(volatile unsigned char *) addr; + return v; +} + +void +pcc_outb(struct iop *p, unsigned char value, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + + if (port & 1) + addr += 0x00400000; + *(volatile unsigned char *) addr = value; +} + +unsigned char +bad_inb(struct iop *p, unsigned long port) +{ + badio(inb, port); +} + +void +bad_outb(struct iop *p, unsigned char value, unsigned long port) +{ + badio(inw, port); +} + +#ifdef CONFIG_SMC91X +/* MSTLANEX01 LAN at 0xb400:0000 */ +static struct iop laniop = { + .start = 0x00, + .end = 0x0F, + .base = 0x04000000, + .check = simple_check, + .inb = simple_inb, + .inw = simple_inw, + .outb = simple_outb, + .outw = simple_outw, +}; +#endif + +#ifdef CONFIG_NE2000 +/* NE2000 pc card NIC */ +static struct iop neiop = { + .start = 0x280, + .end = 0x29f, + .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ + .check = simple_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; +#endif + +#ifdef CONFIG_IDE +/* CF in CF slot */ +static struct iop cfiop = { + .base = 0xb0600000, + .check = ide_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; +#endif + +static __inline__ struct iop * +port2iop(unsigned long port) +{ + if (0) ; +#if defined(CONFIG_SMC91X) + else if (laniop.check(&laniop, port)) + return &laniop; +#endif +#if defined(CONFIG_NE2000) + else if (neiop.check(&neiop, port)) + return &neiop; +#endif +#if defined(CONFIG_IDE) + else if (cfiop.check(&cfiop, port)) + return &cfiop; +#endif + else + return NULL; +} + +static inline void +delay(void) +{ + ctrl_inw(0xac000000); + ctrl_inw(0xac000000); +} + +unsigned char +sh7343se_inb(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inb) (p, port); +} + +unsigned char +sh7343se_inb_p(unsigned long port) +{ + unsigned char v = sh7343se_inb(port); + delay(); + return v; +} + +unsigned short +sh7343se_inw(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inw) (p, port); +} + +unsigned int +sh7343se_inl(unsigned long port) +{ + badio(inl, port); +} + +void +sh7343se_outb(unsigned char value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outb) (p, value, port); +} + +void +sh7343se_outb_p(unsigned char value, unsigned long port) +{ + sh7343se_outb(value, port); + delay(); +} + +void +sh7343se_outw(unsigned short value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outw) (p, value, port); +} + +void +sh7343se_outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void +sh7343se_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inb) (p, port); +} + +void +sh7343se_insw(unsigned long port, void *addr, unsigned long count) +{ + unsigned short *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inw) (p, port); +} + +void +sh7343se_insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void +sh7343se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *a = (unsigned char *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outb) (p, *a++, port); +} + +void +sh7343se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + unsigned short *a = (unsigned short *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outw) (p, *a++, port); +} + +void +sh7343se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c new file mode 100644 index 00000000000..b41e3d4ea37 --- /dev/null +++ b/arch/sh/boards/se/7343/irq.c @@ -0,0 +1,193 @@ +/* + * arch/sh/boards/se/7343/irq.c + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/mach/se7343.h> + +static void +disable_intreq_irq(unsigned int irq) +{ + int bit = irq - OFFCHIP_IRQ_BASE; + u16 val; + + val = ctrl_inw(PA_CPLD_IMSK); + val |= 1 << bit; + ctrl_outw(val, PA_CPLD_IMSK); +} + +static void +enable_intreq_irq(unsigned int irq) +{ + int bit = irq - OFFCHIP_IRQ_BASE; + u16 val; + + val = ctrl_inw(PA_CPLD_IMSK); + val &= ~(1 << bit); + ctrl_outw(val, PA_CPLD_IMSK); +} + +static void +mask_and_ack_intreq_irq(unsigned int irq) +{ + disable_intreq_irq(irq); +} + +static unsigned int +startup_intreq_irq(unsigned int irq) +{ + enable_intreq_irq(irq); + return 0; +} + +static void +shutdown_intreq_irq(unsigned int irq) +{ + disable_intreq_irq(irq); +} + +static void +end_intreq_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_intreq_irq(irq); +} + +static struct hw_interrupt_type intreq_irq_type = { + .typename = "FPGA-IRQ", + .startup = startup_intreq_irq, + .shutdown = shutdown_intreq_irq, + .enable = enable_intreq_irq, + .disable = disable_intreq_irq, + .ack = mask_and_ack_intreq_irq, + .end = end_intreq_irq +}; + +static void +make_intreq_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &intreq_irq_type; + disable_intreq_irq(irq); +} + +int +shmse_irq_demux(int irq) +{ + int bit; + volatile u16 val; + + if (irq == IRQ5_IRQ) { + /* Read status Register */ + val = ctrl_inw(PA_CPLD_ST); + bit = ffs(val); + if (bit != 0) + return OFFCHIP_IRQ_BASE + bit - 1; + } + return irq; +} + +/* IRQ5 is multiplexed between the following sources: + * 1. PC Card socket + * 2. Extension slot + * 3. USB Controller + * 4. Serial Controller + * + * We configure IRQ5 as a cascade IRQ. + */ +static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", + NULL, NULL}; + +/* + * Initialize IRQ setting + */ +void __init +init_7343se_IRQ(void) +{ + /* Setup Multiplexed interrupts */ + ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active + * low. + */ + /* Mask all CPLD controller interrupts */ + ctrl_outw(0x0fff, PA_CPLD_IMSK); + + /* PC Card interrupts */ + make_intreq_irq(PC_IRQ0); + make_intreq_irq(PC_IRQ1); + make_intreq_irq(PC_IRQ2); + make_intreq_irq(PC_IRQ3); + + /* Extension Slot Interrupts */ + make_intreq_irq(EXT_IRQ0); + make_intreq_irq(EXT_IRQ1); + make_intreq_irq(EXT_IRQ2); + make_intreq_irq(EXT_IRQ3); + + /* USB Controller interrupts */ + make_intreq_irq(USB_IRQ0); + make_intreq_irq(USB_IRQ1); + + /* Serial Controller interrupts */ + make_intreq_irq(UART_IRQ0); + make_intreq_irq(UART_IRQ1); + + /* Setup all external interrupts to be active low */ + ctrl_outw(0xaaaa, INTC_ICR1); + + make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY); + setup_irq(IRQ5_IRQ, &irq5); + /* Set port control to use IRQ5 */ + *(u16 *)0xA4050108 &= ~0xc; + + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + + ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ + + make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + + /* I2C block */ + make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); + make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, + IIC0_PRIORITY); + make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, + IIC0_PRIORITY); + make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); + + make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); + make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, + IIC1_PRIORITY); + make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, + IIC1_PRIORITY); + make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); + + /* SIOF */ + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + + /* SIU */ + make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); + + /* VIO interrupt */ + make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + + /*MFI interrupt*/ + + make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY); + + /* LCD controller */ + make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); + ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ +} diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c new file mode 100644 index 00000000000..6a439cf83e4 --- /dev/null +++ b/arch/sh/boards/se/7343/led.c @@ -0,0 +1,46 @@ +/* + * arch/sh/boards/se/7343/led.c + * + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <asm/mach/se7343.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_7343se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *) PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); + + if (up) { + if (bit == 7) { + bit--; + up = 0; + } else { + bit++; + } + } else { + if (bit == 0) { + bit++; + up = 1; + } else { + bit--; + } + } + *p = 1 << (bit + LED_SHIFT); + +} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c new file mode 100644 index 00000000000..787322291fb --- /dev/null +++ b/arch/sh/boards/se/7343/setup.c @@ -0,0 +1,84 @@ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/mach/se7343.h> +#include <asm/irq.h> + +void heartbeat_7343se(void); +void init_7343se_IRQ(void); + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x10000000, + .end = 0x1000000F, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* + * shared with other devices via externel + * interrupt controller in FPGA... + */ + .start = EXT_IRQ2, + .end = EXT_IRQ2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *smc91x_platform_devices[] __initdata = { + &smc91x_device, +}; + +static int __init sh7343se_devices_setup(void) +{ + return platform_add_devices(smc91x_platform_devices, + ARRAY_SIZE(smc91x_platform_devices)); +} + +static void __init sh7343se_setup(char **cmdline_p) +{ + device_initcall(sh7343se_devices_setup); +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_7343se __initmv = { + .mv_name = "SolutionEngine 7343", + .mv_setup = sh7343se_setup, + .mv_nr_irqs = 108, + .mv_inb = sh7343se_inb, + .mv_inw = sh7343se_inw, + .mv_inl = sh7343se_inl, + .mv_outb = sh7343se_outb, + .mv_outw = sh7343se_outw, + .mv_outl = sh7343se_outl, + + .mv_inb_p = sh7343se_inb_p, + .mv_inw_p = sh7343se_inw, + .mv_inl_p = sh7343se_inl, + .mv_outb_p = sh7343se_outb_p, + .mv_outw_p = sh7343se_outw, + .mv_outl_p = sh7343se_outl, + + .mv_insb = sh7343se_insb, + .mv_insw = sh7343se_insw, + .mv_insl = sh7343se_insl, + .mv_outsb = sh7343se_outsb, + .mv_outsw = sh7343se_outsw, + .mv_outsl = sh7343se_outsl, + + .mv_init_irq = init_7343se_IRQ, + .mv_irq_demux = shmse_irq_demux, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7343se, +#endif +}; +ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile index be89a73cc41..9a5035f80ec 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/se/770x/Makefile @@ -2,5 +2,5 @@ # Makefile for the 770x SolutionEngine specific parts of the kernel # -obj-y := mach.o setup.o io.o irq.o led.o - +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c index 9a39ee96314..9941949331a 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/se/770x/io.c @@ -1,4 +1,4 @@ -/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ +/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ * * linux/arch/sh/kernel/io_se.c * @@ -11,7 +11,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/se/se.h> +#include <asm/se.h> /* SH pcmcia io window base, start and end. */ int sh_pcic_io_wbase = 0xb8400000; @@ -20,11 +20,6 @@ int sh_pcic_io_stop; int sh_pcic_io_type; int sh_pcic_io_dummy; -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which can be accessed only with 16-bit wide. */ @@ -52,10 +47,6 @@ shifted_port(unsigned long port) return 1; } -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - unsigned char se_inb(unsigned long port) { if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) @@ -76,7 +67,7 @@ unsigned char se_inb_p(unsigned long port) v = (*port2adr(port) >> 8); else v = (*port2adr(port))&0xff; - delay(); + ctrl_delay(); return v; } @@ -86,13 +77,13 @@ unsigned short se_inw(unsigned long port) (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } unsigned int se_inl(unsigned long port) { - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -114,7 +105,7 @@ void se_outb_p(unsigned char value, unsigned long port) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void se_outw(unsigned short value, unsigned long port) @@ -123,12 +114,12 @@ void se_outw(unsigned short value, unsigned long port) (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void se_outl(unsigned int value, unsigned long port) { - maybebadio(outl, port); + maybebadio(port); } void se_insb(unsigned long port, void *addr, unsigned long count) @@ -159,7 +150,7 @@ void se_insw(unsigned long port, void *addr, unsigned long count) void se_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void se_outsb(unsigned long port, const void *addr, unsigned long count) @@ -190,37 +181,5 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count) void se_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); -#if 0 - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); -#endif - return 0; -} - -unsigned long -se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index 3e558716ce1..cff6700bbaf 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -11,7 +11,7 @@ #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se/se.h> +#include <asm/se.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c index 3cddbda025f..daf7b1ee786 100644 --- a/arch/sh/boards/se/770x/led.c +++ b/arch/sh/boards/se/770x/led.c @@ -9,22 +9,8 @@ * This file contains Solution Engine specific LED code. */ -#include <asm/se/se.h> - -static void mach_led(int position, int value) -{ - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - - if (value) { - *p |= (1<<8); - } else { - *p &= ~(1<<8); - } -} - -#ifdef CONFIG_HEARTBEAT - #include <linux/sched.h> +#include <asm/se.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ void heartbeat_se(void) @@ -64,4 +50,3 @@ void heartbeat_se(void) *p = 1<<(bit+8); } -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/770x/mach.c b/arch/sh/boards/se/770x/mach.c deleted file mode 100644 index 6ec07bd3dcf..00000000000 --- a/arch/sh/boards/se/770x/mach.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_se.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Hitachi SolutionEngine - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/se/io.h> - -void heartbeat_se(void); -void setup_se(void); -void init_se_IRQ(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_se __initmv = { -#if defined(CONFIG_CPU_SH4) - .mv_nr_irqs = 48, -#elif defined(CONFIG_CPU_SUBTYPE_SH7708) - .mv_nr_irqs = 32, -#elif defined(CONFIG_CPU_SUBTYPE_SH7709) - .mv_nr_irqs = 61, -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) - .mv_nr_irqs = 86, -#endif - - .mv_inb = se_inb, - .mv_inw = se_inw, - .mv_inl = se_inl, - .mv_outb = se_outb, - .mv_outw = se_outw, - .mv_outl = se_outl, - - .mv_inb_p = se_inb_p, - .mv_inw_p = se_inw, - .mv_inl_p = se_inl, - .mv_outb_p = se_outb_p, - .mv_outw_p = se_outw, - .mv_outl_p = se_outl, - - .mv_insb = se_insb, - .mv_insw = se_insw, - .mv_insl = se_insl, - .mv_outsb = se_outsb, - .mv_outsw = se_outsw, - .mv_outsl = se_outsl, - - .mv_isa_port2addr = se_isa_port2addr, - - .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif -}; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 7d1a071727c..f3f82b7c821 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -7,15 +7,17 @@ * Hitachi SolutionEngine Support. * */ - #include <linux/init.h> #include <linux/irq.h> - #include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/se/se.h> -#include <asm/se/smc37c93x.h> +#include <asm/se.h> +#include <asm/smc37c93x.h> +#include <asm/machvec.h> + +void heartbeat_se(void); +void init_se_IRQ(void); /* * Configure the Super I/O chip @@ -26,7 +28,8 @@ static void __init smsc_config(int index, int data) outb_p(data, DATA_PORT); } -static void __init init_smsc(void) +/* XXX: Another candidate for a more generic cchip machine vector */ +static void __init smsc_setup(char **cmdline_p) { outb_p(CONFIG_ENTER, CONFIG_PORT); outb_p(CONFIG_ENTER, CONFIG_PORT); @@ -69,16 +72,46 @@ static void __init init_smsc(void) outb_p(CONFIG_EXIT, CONFIG_PORT); } -const char *get_system_type(void) -{ - return "SolutionEngine"; -} - /* - * Initialize the board + * The Machine Vector */ -void __init platform_setup(void) -{ - init_smsc(); - /* XXX: RTC setting comes here */ -} +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_setup = smsc_setup, +#if defined(CONFIG_CPU_SH4) + .mv_nr_irqs = 48, +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) + .mv_nr_irqs = 32, +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) + .mv_nr_irqs = 61, +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) + .mv_nr_irqs = 86, +#endif + + .mv_inb = se_inb, + .mv_inw = se_inw, + .mv_inl = se_inl, + .mv_outb = se_outb, + .mv_outw = se_outw, + .mv_outl = se_outl, + + .mv_inb_p = se_inb_p, + .mv_inw_p = se_inw, + .mv_inl_p = se_inl, + .mv_outb_p = se_outb_p, + .mv_outw_p = se_outw, + .mv_outl_p = se_outl, + + .mv_insb = se_insb, + .mv_insw = se_insw, + .mv_insl = se_insl, + .mv_outsb = se_outsb, + .mv_outsw = se_outsw, + .mv_outsl = se_outsl, + + .mv_init_irq = init_se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_se, +#endif +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index ce7ca247f84..188900c4832 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -2,7 +2,7 @@ # Makefile for the 7751 SolutionEngine specific parts of the kernel # -obj-y := mach.o setup.o io.o irq.o led.o +obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o - +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c index 99041b26926..e8d846cec89 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/se/7751/io.c @@ -1,6 +1,4 @@ -/* - * linux/arch/sh/kernel/io_7751se.c - * +/* * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,96 +8,21 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> +#include <linux/pci.h> #include <asm/io.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> #include <asm/addrspace.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - -#if 0 -/****************************************************************** - * Variables from io_se.c, related to PCMCIA (not PCI); we're not - * compiling them in, and have removed references from functions - * which follow. [Many checked for IO ports in the range bounded - * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. - * As start/stop are uninitialized, only port 0x0 would match?] - * When used, remember to adjust names to avoid clash with io_se? - *****************************************************************/ -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; -/*************************************************************/ -#endif - -/* - * The 7751 Solution Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - -static inline volatile __u16 * -port2adr(unsigned int port) +static inline volatile u16 *port2adr(unsigned int port) { if (port >= 0x2000) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); -#if 0 - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -#endif - maybebadio(name,(unsigned long)port); + maybebadio((unsigned long)port); return (volatile __u16*)port; } -#if 0 -/* The 7751 Solution Engine seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -111,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char sh7751se_inb_p(unsigned long port) @@ -123,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port)) & 0xff; + ctrl_delay(); return v; } @@ -135,12 +58,12 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } @@ -148,12 +71,12 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -162,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -172,73 +95,41 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else - maybebadio(outl, port); + maybebadio(port); } void sh7751se_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -#if 0 -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); - return 0; -} -#endif - -unsigned long -sh7751se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index bf6c023615d..c607b0a4847 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/irq.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c index a878726d3c7..ff0355dea81 100644 --- a/arch/sh/boards/se/7751/led.c +++ b/arch/sh/boards/se/7751/led.c @@ -8,23 +8,8 @@ * * This file contains Solution Engine specific LED code. */ - -#include <asm/se7751/se7751.h> - -static void mach_led(int position, int value) -{ - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - - if (value) { - *p |= (1<<8); - } else { - *p &= ~(1<<8); - } -} - -#ifdef CONFIG_HEARTBEAT - #include <linux/sched.h> +#include <asm/se7751.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ void heartbeat_7751se(void) @@ -64,4 +49,3 @@ void heartbeat_7751se(void) *p = 1<<(bit+8); } -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c deleted file mode 100644 index 62d8d3e6259..00000000000 --- a/arch/sh/boards/se/7751/mach.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_7751se.c - * - * Minor tweak of mach_se.c file to reference 7751se-specific items. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Hitachi 7751 SolutionEngine - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/se7751/io.h> - -void heartbeat_7751se(void); -void init_7751se_IRQ(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_7751se __initmv = { - .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - - .mv_isa_port2addr = sh7751se_isa_port2addr, - - .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif -}; -ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 48dc5aee67d..73e826310ba 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -1,4 +1,4 @@ -/* +/* * linux/arch/sh/kernel/setup_7751se.c * * Copyright (C) 2000 Kazumoto Kojima @@ -11,78 +11,15 @@ #include <linux/init.h> #include <linux/irq.h> - -#include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -#endif - -/* - * Configure the Super I/O chip - */ -#if 0 -/* Leftover code from regular Solution Engine, for reference. */ -/* The SH7751 Solution Engine has a different SuperIO. */ -static void __init smsc_config(int index, int data) -{ - outb_p(index, INDEX_PORT); - outb_p(data, DATA_PORT); -} - -static void __init init_smsc(void) -{ - outb_p(CONFIG_ENTER, CONFIG_PORT); - outb_p(CONFIG_ENTER, CONFIG_PORT); - - /* FDC */ - smsc_config(CURRENT_LDN_INDEX, LDN_FDC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - - /* AUXIO (GPIO): to use IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); - smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ - smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ - - /* COM1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x03); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ - - /* COM2 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM2); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x02); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ - - /* RTC */ - smsc_config(CURRENT_LDN_INDEX, LDN_RTC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ - - /* XXX: PARPORT, KBD, and MOUSE will come here... */ - outb_p(CONFIG_EXIT, CONFIG_PORT); -} -#endif - -const char *get_system_type(void) -{ - return "7751 SolutionEngine"; -} +void heartbeat_7751se(void); +void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> static int kgdb_uart_setup(void); static struct kgdb_sermap kgdb_uart_sermap = { "ttyS", 0, kgdb_uart_setup, NULL }; @@ -91,7 +28,7 @@ static struct kgdb_sermap kgdb_uart_sermap = /* * Initialize the board */ -void __init platform_setup(void) +static void __init sh7751se_setup(char **cmdline_p) { /* Call init_smsc() replacement to set up SuperIO. */ /* XXX: RTC setting comes here */ @@ -225,3 +162,37 @@ static int kgdb_uart_setup(void) return 0; } #endif /* CONFIG_SH_KGDB */ + + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_7751se __initmv = { + .mv_name = "7751 SolutionEngine", + .mv_setup = sh7751se_setup, + .mv_nr_irqs = 72, + + .mv_inb = sh7751se_inb, + .mv_inw = sh7751se_inw, + .mv_inl = sh7751se_inl, + .mv_outb = sh7751se_outb, + .mv_outw = sh7751se_outw, + .mv_outl = sh7751se_outl, + + .mv_inb_p = sh7751se_inb_p, + .mv_inw_p = sh7751se_inw, + .mv_inl_p = sh7751se_inl, + .mv_outb_p = sh7751se_outb_p, + .mv_outw_p = sh7751se_outw, + .mv_outl_p = sh7751se_outl, + + .mv_insl = sh7751se_insl, + .mv_outsl = sh7751se_outsl, + + .mv_init_irq = init_7751se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7751se, +#endif +}; +ALIAS_MV(7751se) diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/sh03/rtc.c index d609863cfe5..0a9266bb51c 100644 --- a/arch/sh/boards/sh03/rtc.c +++ b/arch/sh/boards/sh03/rtc.c @@ -10,9 +10,10 @@ #include <linux/sched.h> #include <linux/time.h> #include <linux/bcd.h> -#include <asm/io.h> #include <linux/rtc.h> #include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/rtc.h> #define RTC_BASE 0xb0000000 #define RTC_SEC1 (RTC_BASE + 0) @@ -34,8 +35,6 @@ #define RTC_BUSY 1 #define RTC_STOP 2 -extern void (*rtc_get_time)(struct timespec *); -extern int (*rtc_set_time)(const time_t); extern spinlock_t rtc_lock; unsigned long get_cmos_time(void) @@ -128,6 +127,6 @@ int sh03_rtc_settimeofday(const time_t secs) void sh03_time_init(void) { - rtc_get_time = sh03_rtc_gettimeofday; - rtc_set_time = sh03_rtc_settimeofday; + rtc_sh_get_time = sh03_rtc_gettimeofday; + rtc_sh_set_time = sh03_rtc_settimeofday; } diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 60290f8f289..6c310587ddf 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -7,22 +7,13 @@ #include <linux/init.h> #include <linux/irq.h> -#include <linux/hdreg.h> -#include <linux/ide.h> #include <asm/io.h> +#include <asm/rtc.h> #include <asm/sh03/io.h> #include <asm/sh03/sh03.h> #include <asm/addrspace.h> -#include "../../drivers/pci/pci-sh7751.h" -extern void (*board_time_init)(void); - -const char *get_system_type(void) -{ - return "Interface CTP/PCI-SH03)"; -} - -void init_sh03_IRQ(void) +static void __init init_sh03_IRQ(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); @@ -34,38 +25,34 @@ void init_sh03_IRQ(void) extern void *cf_io_base; -unsigned long sh03_isa_port2addr(unsigned long port) +static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size) { if (PXSEG(port)) - return port; + return (void __iomem *)port; /* CompactFlash (IDE) */ - if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6)) { - return (unsigned long)cf_io_base + port; - } - return port + SH7751_PCI_IO_BASE; + if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6)) + return (void __iomem *)((unsigned long)cf_io_base + port); + + return (void __iomem *)(port + PCI_IO_BASE); } -/* - * The Machine Vector - */ +/* arch/sh/boards/sh03/rtc.c */ +void sh03_time_init(void); + +static void __init sh03_setup(char **cmdline_p) +{ + board_time_init = sh03_time_init; +} struct sh_machine_vector mv_sh03 __initmv = { + .mv_name = "Interface (CTP/PCI-SH03)", + .mv_setup = sh03_setup, .mv_nr_irqs = 48, - .mv_isa_port2addr = sh03_isa_port2addr, + .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, #ifdef CONFIG_HEARTBEAT .mv_heartbeat = heartbeat_sh03, #endif }; - ALIAS_MV(sh03) - -/* arch/sh/boards/sh03/rtc.c */ -void sh03_time_init(void); - -int __init platform_setup(void) -{ - board_time_init = sh03_time_init; - return 0; -} diff --git a/arch/sh/boards/sh2000/Makefile b/arch/sh/boards/sh2000/Makefile deleted file mode 100644 index 05d390c3599..00000000000 --- a/arch/sh/boards/sh2000/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the SH2000 specific parts of the kernel -# - -obj-y := setup.o - diff --git a/arch/sh/boards/sh2000/setup.c b/arch/sh/boards/sh2000/setup.c deleted file mode 100644 index 2fe6a11765e..00000000000 --- a/arch/sh/boards/sh2000/setup.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * linux/arch/sh/kernel/setup_sh2000.c - * - * Copyright (C) 2001 SUGIOKA Tochinobu - * - * SH-2000 Support. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/io.h> -#include <asm/machvec.h> -#include <asm/mach/sh2000.h> - -#define CF_CIS_BASE 0xb4200000 - -#define PORT_PECR 0xa4000108 -#define PORT_PHCR 0xa400010E -#define PORT_ICR1 0xa4000010 -#define PORT_IRR0 0xa4000004 - -#define IDE_OFFSET 0xb6200000 -#define NIC_OFFSET 0xb6000000 -#define EXTBUS_OFFSET 0xba000000 - - -const char *get_system_type(void) -{ - return "sh2000"; -} - -static unsigned long sh2000_isa_port2addr(unsigned long offset) -{ - if((offset & ~7) == 0x1f0 || offset == 0x3f6) - return IDE_OFFSET + offset; - else if((offset & ~0x1f) == 0x300) - return NIC_OFFSET + offset; - return EXTBUS_OFFSET + offset; -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_sh2000 __initmv = { - .mv_nr_irqs = 80, - .mv_isa_port2addr = sh2000_isa_port2addr, -}; -ALIAS_MV(sh2000) - -/* - * Initialize the board - */ -int __init platform_setup(void) -{ - /* XXX: RTC setting comes here */ - - /* These should be done by BIOS/IPL ... */ - /* Enable nCE2A, nCE2B output */ - ctrl_outw(ctrl_inw(PORT_PECR) & ~0xf00, PORT_PECR); - /* Enable the Compact Flash card, and set the level interrupt */ - ctrl_outw(0x0042, CF_CIS_BASE+0x0200); - /* Enable interrupt */ - ctrl_outw(ctrl_inw(PORT_PHCR) & ~0x03f3, PORT_PHCR); - ctrl_outw(1, PORT_ICR1); - ctrl_outw(ctrl_inw(PORT_IRR0) & ~0xff3f, PORT_IRR0); - printk(KERN_INFO "SH-2000 Setup...done\n"); - return 0; -} diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile new file mode 100644 index 00000000000..3190cc72430 --- /dev/null +++ b/arch/sh/boards/shmin/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the SHMIN board. +# + +obj-y := setup.o diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c new file mode 100644 index 00000000000..2f0c19706cf --- /dev/null +++ b/arch/sh/boards/shmin/setup.c @@ -0,0 +1,41 @@ +/* + * arch/sh/boards/shmin/setup.c + * + * Copyright (C) 2006 Takashi YOSHII + * + * SHMIN Support. + */ +#include <linux/init.h> +#include <asm/machvec.h> +#include <asm/shmin/shmin.h> +#include <asm/clock.h> +#include <asm/irq.h> +#include <asm/io.h> + +#define PFC_PHCR 0xa400010e + +static void __init init_shmin_irq(void) +{ + ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ + ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. +} + +static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) +{ + static int dummy; + + if ((port & ~0x1f) == SHMIN_NE_BASE) + return (void __iomem *)(SHMIN_IO_BASE + port); + + dummy = 0; + + return &dummy; + +} + +struct sh_machine_vector mv_shmin __initmv = { + .mv_name = "SHMIN", + .mv_init_irq = init_shmin_irq, + .mv_ioport_map = shmin_ioport_map, +}; +ALIAS_MV(shmin) diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c index e2eb78fc381..0f482426455 100644 --- a/arch/sh/boards/snapgear/io.c +++ b/arch/sh/boards/snapgear/io.c @@ -1,6 +1,4 @@ -/* - * linux/arch/sh/kernel/io_7751se.c - * +/* * Copyright (C) 2002 David McCullough <davidm@snapgear.com> * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. @@ -11,67 +9,22 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> #include <asm/io.h> #include <asm/addrspace.h> -#include <asm/pci.h> -#include "../../drivers/pci/pci-sh7751.h" - #ifdef CONFIG_SH_SECUREEDGE5410 unsigned short secureedge5410_ioport; #endif -/* - * The SnapGear uses the built-in PCI controller (PCIC) - * of the 7751 processor - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - - static inline volatile __u16 *port2adr(unsigned int port) { -#if 0 - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); -#endif - maybebadio(name,(unsigned long)port); + maybebadio((unsigned long)port); return (volatile __u16*)port; } - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -79,148 +32,106 @@ static inline volatile __u16 *port2adr(unsigned int port) * should be way beyond the window, and is used w/o translation for * compatibility. */ - unsigned char snapgear_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } - unsigned char snapgear_inb_p(unsigned long port) { unsigned char v; if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port))&0xff; + ctrl_delay(); return v; } - unsigned short snapgear_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } - unsigned int snapgear_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } - void snapgear_outb(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } - void snapgear_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } - void snapgear_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } - void snapgear_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else - maybebadio(outl, port); + maybebadio(port); } void snapgear_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void snapgear_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - - -#if 0 -static int sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); -#if 0 - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); -#endif - return 0; -} -#endif - -unsigned long snapgear_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c index b71e009da35..1659fdd6695 100644 --- a/arch/sh/boards/snapgear/rtc.c +++ b/arch/sh/boards/snapgear/rtc.c @@ -17,14 +17,9 @@ #include <linux/time.h> #include <linux/rtc.h> #include <linux/mc146818rtc.h> - #include <asm/io.h> -#include <asm/rtc.h> -#include <asm/mc146818rtc.h> - -/****************************************************************************/ -static int use_ds1302 = 0; +static int use_ds1302; /****************************************************************************/ /* @@ -82,10 +77,6 @@ static unsigned int ds1302_readbyte(unsigned int addr) unsigned int val; unsigned long flags; -#if 0 - printk("SnapGear RTC: ds1302_readbyte(addr=%x)\n", addr); -#endif - local_irq_save(flags); set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); @@ -104,10 +95,6 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val) { unsigned long flags; -#if 0 - printk("SnapGear RTC: ds1302_writebyte(addr=%x)\n", addr); -#endif - local_irq_save(flags); set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); @@ -168,11 +155,8 @@ void __init secureedge5410_rtc_init(void) } if (use_ds1302) { - rtc_get_time = snapgear_rtc_gettimeofday; - rtc_set_time = snapgear_rtc_settimeofday; - } else { - rtc_get_time = sh_rtc_gettimeofday; - rtc_set_time = sh_rtc_settimeofday; + rtc_sh_get_time = snapgear_rtc_gettimeofday; + rtc_sh_set_time = snapgear_rtc_settimeofday; } printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal"); @@ -187,10 +171,8 @@ void snapgear_rtc_gettimeofday(struct timespec *ts) { unsigned int sec, min, hr, day, mon, yr; - if (!use_ds1302) { - sh_rtc_gettimeofday(ts); + if (!use_ds1302) return; - } sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC)); min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); @@ -231,7 +213,7 @@ int snapgear_rtc_settimeofday(const time_t secs) unsigned long nowtime; if (!use_ds1302) - return sh_rtc_settimeofday(secs); + return 0; /* * This is called direct from the kernel timer handling code. @@ -240,10 +222,6 @@ int snapgear_rtc_settimeofday(const time_t secs) nowtime = secs; -#if 1 - printk("SnapGear RTC: snapgear_rtc_settimeofday(nowtime=%ld)\n", nowtime); -#endif - /* STOP RTC */ ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80); @@ -329,5 +307,3 @@ void secureedge5410_cmos_write(unsigned char val, int addr) default: break; } } - -/****************************************************************************/ diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index f1f7c70c940..f5e98c56b53 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -1,5 +1,4 @@ -/****************************************************************************/ -/* +/* * linux/arch/sh/boards/snapgear/setup.c * * Copyright (C) 2002 David McCullough <davidm@snapgear.com> @@ -12,8 +11,6 @@ * Modified for 7751 Solution Engine by * Ian da Silva and Jeremy Siegel, 2001. */ -/****************************************************************************/ - #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -21,14 +18,13 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/sched.h> - #include <asm/machvec.h> -#include <asm/mach/io.h> +#include <asm/snapgear.h> #include <asm/irq.h> #include <asm/io.h> +#include <asm/rtc.h> #include <asm/cpu/timer.h> -extern void (*board_time_init)(void); extern void secureedge5410_rtc_init(void); extern void pcibios_init(void); @@ -85,101 +81,20 @@ static void __init init_snapgear_IRQ(void) make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); } -/****************************************************************************/ -/* - * Fast poll interrupt simulator. - */ - /* - * Leave all of the fast timer/fast poll stuff commented out for now, since - * it's not clear whether it actually works or not. Since it wasn't being used - * at all in 2.4, we'll assume it's not sane for 2.6 either.. -- PFM - */ -#if 0 -#define FAST_POLL 1000 -//#define FAST_POLL_INTR - -#define FASTTIMER_IRQ 17 -#define FASTTIMER_IPR_ADDR INTC_IPRA -#define FASTTIMER_IPR_POS 2 -#define FASTTIMER_PRIORITY 3 - -#ifdef FAST_POLL_INTR -#define TMU1_TCR_INIT 0x0020 -#else -#define TMU1_TCR_INIT 0 -#endif -#define TMU_TSTR_INIT 1 -#define TMU1_TCR_CALIB 0x0000 - - -#ifdef FAST_POLL_INTR -static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs) -{ - unsigned long timer_status; - timer_status = ctrl_inw(TMU1_TCR); - timer_status &= ~0x100; - ctrl_outw(timer_status, TMU1_TCR); -} -#endif - -/* - * return the current ticks on the fast timer - */ - -unsigned long fast_timer_count(void) -{ - return(ctrl_inl(TMU1_TCNT)); -} - -/* - * setup a fast timer for profiling etc etc + * Initialize the board */ - -static void setup_fast_timer() -{ - unsigned long interval; - -#ifdef FAST_POLL_INTR - interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL; - - make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS, - FASTTIMER_PRIORITY); - - printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ); - - if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer", - NULL) != 0) - printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__); -#else - printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ); - interval = 0xffffffff; -#endif - - ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */ - ctrl_outw(TMU1_TCR_INIT, TMU1_TCR); - ctrl_outl(interval, TMU1_TCOR); - ctrl_outl(interval, TMU1_TCNT); - ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */ - - printk("Timer count 1 = 0x%x\n", fast_timer_count()); - udelay(1000); - printk("Timer count 2 = 0x%x\n", fast_timer_count()); -} -#endif - -/****************************************************************************/ - -const char *get_system_type(void) +static void __init snapgear_setup(char **cmdline_p) { - return "SnapGear SecureEdge5410"; + board_time_init = secureedge5410_rtc_init; } /* * The Machine Vector */ - struct sh_machine_vector mv_snapgear __initmv = { + .mv_name = "SnapGear SecureEdge5410", + .mv_setup = snapgear_setup, .mv_nr_irqs = 72, .mv_inb = snapgear_inb, @@ -196,20 +111,6 @@ struct sh_machine_vector mv_snapgear __initmv = { .mv_outw_p = snapgear_outw, .mv_outl_p = snapgear_outl, - .mv_isa_port2addr = snapgear_isa_port2addr, - .mv_init_irq = init_snapgear_IRQ, }; ALIAS_MV(snapgear) - -/* - * Initialize the board - */ - -int __init platform_setup(void) -{ - board_time_init = secureedge5410_rtc_init; - - return 0; -} - diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c index 236398fbc08..8c64baa3036 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/superh/microdev/irq.c @@ -11,14 +11,12 @@ #include <linux/init.h> #include <linux/irq.h> - #include <asm/system.h> #include <asm/io.h> #include <asm/microdev.h> #define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ - static const struct { unsigned char fpgaIrq; unsigned char mapped; @@ -93,53 +91,42 @@ static struct hw_interrupt_type microdev_irq_type = { static void disable_microdev_irq(unsigned int irq) { - unsigned int flags; unsigned int fpgaIrq; - if (irq >= NUM_EXTERNAL_IRQS) return; - if (!fpgaIrqTable[irq].mapped) return; + if (irq >= NUM_EXTERNAL_IRQS) + return; + if (!fpgaIrqTable[irq].mapped) + return; fpgaIrq = fpgaIrqTable[irq].fpgaIrq; - /* disable interrupts */ - local_irq_save(flags); - - /* disable interupts on the FPGA INTC register */ + /* disable interupts on the FPGA INTC register */ ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); - - /* restore interrupts */ - local_irq_restore(flags); } static void enable_microdev_irq(unsigned int irq) { unsigned long priorityReg, priorities, pri; - unsigned int flags; unsigned int fpgaIrq; - - if (irq >= NUM_EXTERNAL_IRQS) return; - if (!fpgaIrqTable[irq].mapped) return; + if (unlikely(irq >= NUM_EXTERNAL_IRQS)) + return; + if (unlikely(!fpgaIrqTable[irq].mapped)) + return; pri = 15 - irq; fpgaIrq = fpgaIrqTable[irq].fpgaIrq; priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); - /* disable interrupts */ - local_irq_save(flags); - - /* set priority for the interrupt */ + /* set priority for the interrupt */ priorities = ctrl_inl(priorityReg); priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); ctrl_outl(priorities, priorityReg); - /* enable interupts on the FPGA INTC register */ + /* enable interupts on the FPGA INTC register */ ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); - - /* restore interrupts */ - local_irq_restore(flags); } /* This functions sets the desired irq handler to be a MicroDev type */ @@ -158,9 +145,7 @@ static void mask_and_ack_microdev(unsigned int irq) static void end_microdev_irq(unsigned int irq) { if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - { enable_microdev_irq(irq); - } } extern void __init init_microdev_irq(void) @@ -171,9 +156,7 @@ extern void __init init_microdev_irq(void) ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); for (i = 0; i < NUM_EXTERNAL_IRQS; i++) - { make_microdev_irq(i); - } } extern void microdev_print_fpga_intc_status(void) diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c index 61b402a3f5d..031c814e6e7 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/superh/microdev/setup.c @@ -10,7 +10,6 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. */ - #include <linux/init.h> #include <linux/platform_device.h> #include <linux/ioport.h> @@ -21,41 +20,6 @@ extern void microdev_heartbeat(void); -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_sh4202_microdev __initmv = { - .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */ - - .mv_inb = microdev_inb, - .mv_inw = microdev_inw, - .mv_inl = microdev_inl, - .mv_outb = microdev_outb, - .mv_outw = microdev_outw, - .mv_outl = microdev_outl, - - .mv_inb_p = microdev_inb_p, - .mv_inw_p = microdev_inw_p, - .mv_inl_p = microdev_inl_p, - .mv_outb_p = microdev_outb_p, - .mv_outw_p = microdev_outw_p, - .mv_outl_p = microdev_outl_p, - - .mv_insb = microdev_insb, - .mv_insw = microdev_insw, - .mv_insl = microdev_insl, - .mv_outsb = microdev_outsb, - .mv_outsw = microdev_outsw, - .mv_outsl = microdev_outsl, - - .mv_init_irq = init_microdev_irq, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = microdev_heartbeat, -#endif -}; -ALIAS_MV(sh4202_microdev) /****************************************************************************/ @@ -113,11 +77,6 @@ ALIAS_MV(sh4202_microdev) /* assume a Keyboard Controller is present */ int microdev_kbd_controller_present = 1; -const char *get_system_type(void) -{ - return "SH4-202 MicroDev"; -} - static struct resource smc91x_resources[] = { [0] = { .start = 0x300, @@ -291,25 +250,9 @@ static int __init microdev_devices_setup(void) return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices)); } -__initcall(microdev_devices_setup); - -void __init platform_setup(void) -{ - int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul); - const int fpgaRevision = *fpgaRevisionRegister; - int * const CacheControlRegister = (int*)CCR; - - printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n", - get_system_type(), fpgaRevision, *CacheControlRegister); -} - - -/****************************************************************************/ - - - /* - * Setup for the SMSC FDC37C93xAPM - */ +/* + * Setup for the SMSC FDC37C93xAPM + */ static int __init smsc_superio_setup(void) { @@ -412,8 +355,52 @@ static int __init smsc_superio_setup(void) return 0; } +static void __init microdev_setup(char **cmdline_p) +{ + int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul); + const int fpgaRevision = *fpgaRevisionRegister; + int * const CacheControlRegister = (int*)CCR; + + device_initcall(microdev_devices_setup); + device_initcall(smsc_superio_setup); -/* This is grotty, but, because kernel is always referenced on the link line - * before any devices, this is safe. + printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n", + get_system_type(), fpgaRevision, *CacheControlRegister); +} + +/* + * The Machine Vector */ -__initcall(smsc_superio_setup); +struct sh_machine_vector mv_sh4202_microdev __initmv = { + .mv_name = "SH4-202 MicroDev", + .mv_setup = microdev_setup, + .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */ + + .mv_inb = microdev_inb, + .mv_inw = microdev_inw, + .mv_inl = microdev_inl, + .mv_outb = microdev_outb, + .mv_outw = microdev_outw, + .mv_outl = microdev_outl, + + .mv_inb_p = microdev_inb_p, + .mv_inw_p = microdev_inw_p, + .mv_inl_p = microdev_inl_p, + .mv_outb_p = microdev_outb_p, + .mv_outw_p = microdev_outw_p, + .mv_outl_p = microdev_outl_p, + + .mv_insb = microdev_insb, + .mv_insw = microdev_insw, + .mv_insl = microdev_insl, + .mv_outsb = microdev_outsb, + .mv_outsw = microdev_outsw, + .mv_outsl = microdev_outsl, + + .mv_init_irq = init_microdev_irq, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = microdev_heartbeat, +#endif +}; +ALIAS_MV(sh4202_microdev) diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/titan/Makefile new file mode 100644 index 00000000000..08d75370006 --- /dev/null +++ b/arch/sh/boards/titan/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Nimble Microsystems TITAN specific parts of the kernel +# + +obj-y := setup.o io.o diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/titan/io.c new file mode 100644 index 00000000000..4730c1dd697 --- /dev/null +++ b/arch/sh/boards/titan/io.c @@ -0,0 +1,126 @@ +/* + * I/O routines for Titan + */ +#include <linux/pci.h> +#include <asm/machvec.h> +#include <asm/addrspace.h> +#include <asm/titan.h> +#include <asm/io.h> + +static inline unsigned int port2adr(unsigned int port) +{ + maybebadio((unsigned long)port); + return port; +} + +u8 titan_inb(unsigned long port) +{ + if (PXSEG(port)) + return ctrl_inb(port); + else if (is_pci_ioaddr(port)) + return ctrl_inb(pci_ioaddr(port)); + return ctrl_inw(port2adr(port)) & 0xff; +} + +u8 titan_inb_p(unsigned long port) +{ + u8 v; + + if (PXSEG(port)) + v = ctrl_inb(port); + else if (is_pci_ioaddr(port)) + v = ctrl_inb(pci_ioaddr(port)); + else + v = ctrl_inw(port2adr(port)) & 0xff; + ctrl_delay(); + return v; +} + +u16 titan_inw(unsigned long port) +{ + if (PXSEG(port)) + return ctrl_inw(port); + else if (is_pci_ioaddr(port)) + return ctrl_inw(pci_ioaddr(port)); + else if (port >= 0x2000) + return ctrl_inw(port2adr(port)); + else + maybebadio(port); + return 0; +} + +u32 titan_inl(unsigned long port) +{ + if (PXSEG(port)) + return ctrl_inl(port); + else if (is_pci_ioaddr(port)) + return ctrl_inl(pci_ioaddr(port)); + else if (port >= 0x2000) + return ctrl_inw(port2adr(port)); + else + maybebadio(port); + return 0; +} + +void titan_outb(u8 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outb(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); + else + ctrl_outw(value, port2adr(port)); +} + +void titan_outb_p(u8 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outb(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); + else + ctrl_outw(value, port2adr(port)); + ctrl_delay(); +} + +void titan_outw(u16 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outw(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outw(value, pci_ioaddr(port)); + else if (port >= 0x2000) + ctrl_outw(value, port2adr(port)); + else + maybebadio(port); +} + +void titan_outl(u32 value, unsigned long port) +{ + if (PXSEG(port)) + ctrl_outl(value, port); + else if (is_pci_ioaddr(port)) + ctrl_outl(value, pci_ioaddr(port)); + else + maybebadio(port); +} + +void titan_insl(unsigned long port, void *dst, unsigned long count) +{ + maybebadio(port); +} + +void titan_outsl(unsigned long port, const void *src, unsigned long count) +{ + maybebadio(port); +} + +void __iomem *titan_ioport_map(unsigned long port, unsigned int size) +{ + if (PXSEG(port) || is_pci_memaddr(port)) + return (void __iomem *)port; + else if (is_pci_ioaddr(port)) + return (void __iomem *)pci_ioaddr(port); + + return (void __iomem *)port2adr(port); +} diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c new file mode 100644 index 00000000000..52b66d8b8d2 --- /dev/null +++ b/arch/sh/boards/titan/setup.c @@ -0,0 +1,48 @@ +/* + * Setup for Titan + */ + +#include <linux/init.h> +#include <asm/irq.h> +#include <asm/titan.h> +#include <asm/io.h> + +extern void __init pcibios_init_platform(void); + +static void __init init_titan_irq(void) +{ + /* enable individual interrupt mode for externals */ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + + make_ipr_irq( TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */ + make_ipr_irq( TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */ + make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */ + make_ipr_irq( TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */ +} + +struct sh_machine_vector mv_titan __initmv = { + .mv_name = "Titan", + + .mv_inb = titan_inb, + .mv_inw = titan_inw, + .mv_inl = titan_inl, + .mv_outb = titan_outb, + .mv_outw = titan_outw, + .mv_outl = titan_outl, + + .mv_inb_p = titan_inb_p, + .mv_inw_p = titan_inw, + .mv_inl_p = titan_inl, + .mv_outb_p = titan_outb_p, + .mv_outw_p = titan_outw, + .mv_outl_p = titan_outl, + + .mv_insl = titan_insl, + .mv_outsl = titan_outsl, + + .mv_ioport_map = titan_ioport_map, + + .mv_init_irq = init_titan_irq, + .mv_init_pci = pcibios_init_platform, +}; +ALIAS_MV(titan) diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c index c5e4ed10876..1c941370a2e 100644 --- a/arch/sh/boards/unknown/setup.c +++ b/arch/sh/boards/unknown/setup.c @@ -14,19 +14,8 @@ */ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/irq.h> struct sh_machine_vector mv_unknown __initmv = { - .mv_nr_irqs = NR_IRQS, + .mv_name = "Unknown", }; ALIAS_MV(unknown) - -const char *get_system_type(void) -{ - return "Unknown"; -} - -void __init platform_setup(void) -{ -} - diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index 75a6876bf6c..e5f44379007 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -18,13 +18,20 @@ endif # Assign dummy values if these 2 variables are not defined, # in order to suppress error message. # +CONFIG_PAGE_OFFSET ?= 0x80000000 CONFIG_MEMORY_START ?= 0x0c000000 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 -IMAGE_OFFSET := $(shell printf "0x%8x" $$[0x80000000+$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) + +IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET) + \ + $(CONFIG_MEMORY_START) + \ + $(CONFIG_BOOT_LINK_OFFSET)]) + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE $(call if_changed,ld) @: diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 155d139884c..0582ca8346b 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -65,6 +65,11 @@ config HD64461_IRQ Do not change this unless you know what you are doing. +config HD64461_IOBASE + hex "HD64461 start address" + depends on HD64461 + default "0xb0000000" + config HD64461_ENABLER bool "HD64461 PCMCIA enabler" depends on HD64461 @@ -73,7 +78,6 @@ config HD64461_ENABLER via the HD64461 companion chip. Otherwise, say N. - config HD64465_IOBASE hex "HD64465 start address" depends on HD64465 diff --git a/arch/sh/cchips/hd6446x/hd64461/io.c b/arch/sh/cchips/hd6446x/hd64461/io.c index ac3062671db..7909a1b7b51 100644 --- a/arch/sh/cchips/hd6446x/hd64461/io.c +++ b/arch/sh/cchips/hd6446x/hd64461/io.c @@ -1,11 +1,10 @@ /* - * $Id: io.c,v 1.6 2004/03/16 00:07:50 lethal Exp $ * Copyright (C) 2000 YAEGASHI Takeshi * Typical I/O routines for HD64461 system. */ #include <asm/io.h> -#include <asm/hd64461/hd64461.h> +#include <asm/hd64461.h> #define MEM_BASE (CONFIG_HD64461_IOBASE - HD64461_STBCR) @@ -54,11 +53,6 @@ static __inline__ unsigned long PORT2ADDR(unsigned long port) return 0xa0000000 + (port & 0x1fffffff); } -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - unsigned char hd64461_inb(unsigned long port) { return *(volatile unsigned char*)PORT2ADDR(port); @@ -67,7 +61,7 @@ unsigned char hd64461_inb(unsigned long port) unsigned char hd64461_inb_p(unsigned long port) { unsigned long v = *(volatile unsigned char*)PORT2ADDR(port); - delay(); + ctrl_delay(); return v; } @@ -89,7 +83,7 @@ void hd64461_outb(unsigned char b, unsigned long port) void hd64461_outb_p(unsigned char b, unsigned long port) { *(volatile unsigned char*)PORT2ADDR(port) = b; - delay(); + ctrl_delay(); } void hd64461_outw(unsigned short b, unsigned long port) @@ -144,13 +138,13 @@ void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count) while(count--) *addr=*buf++; } -unsigned short hd64461_readw(unsigned long addr) +unsigned short hd64461_readw(void __iomem *addr) { - return *(volatile unsigned short*)(MEM_BASE+addr); + return ctrl_inw(MEM_BASE+(unsigned long __force)addr); } -void hd64461_writew(unsigned short b, unsigned long addr) +void hd64461_writew(unsigned short b, void __iomem *addr) { - *(volatile unsigned short*)(MEM_BASE+addr) = b; + ctrl_outw(b, MEM_BASE+(unsigned long __force)addr); } diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c index ad126016720..38f1e8171a3 100644 --- a/arch/sh/cchips/hd6446x/hd64461/setup.c +++ b/arch/sh/cchips/hd6446x/hd64461/setup.c @@ -11,36 +11,28 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/io.h> #include <asm/irq.h> - -#include <asm/hd64461/hd64461.h> +#include <asm/hd64461.h> static void disable_hd64461_irq(unsigned int irq) { - unsigned long flags; unsigned short nimr; unsigned short mask = 1 << (irq - HD64461_IRQBASE); - local_irq_save(flags); nimr = inw(HD64461_NIMR); nimr |= mask; outw(nimr, HD64461_NIMR); - local_irq_restore(flags); } static void enable_hd64461_irq(unsigned int irq) { - unsigned long flags; unsigned short nimr; unsigned short mask = 1 << (irq - HD64461_IRQBASE); - local_irq_save(flags); nimr = inw(HD64461_NIMR); nimr &= ~mask; outw(nimr, HD64461_NIMR); - local_irq_restore(flags); } static void mask_and_ack_hd64461(unsigned int irq) diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c index d2b2851bc44..30573d3e196 100644 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ b/arch/sh/cchips/hd6446x/hd64465/setup.c @@ -25,31 +25,25 @@ static void disable_hd64465_irq(unsigned int irq) { - unsigned long flags; unsigned short nimr; unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask); - local_irq_save(flags); nimr = inw(HD64465_REG_NIMR); nimr |= mask; outw(nimr, HD64465_REG_NIMR); - local_irq_restore(flags); } static void enable_hd64465_irq(unsigned int irq) { - unsigned long flags; unsigned short nimr; unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask); - local_irq_save(flags); nimr = inw(HD64465_REG_NIMR); nimr &= ~mask; outw(nimr, HD64465_REG_NIMR); - local_irq_restore(flags); } diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index 0dc1fb8f968..392c8b12ce3 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -32,37 +32,30 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/rts7751r2d/rts7751r2d.h> -#include <asm/rts7751r2d/voyagergx_reg.h> +#include <asm/voyagergx.h> static void disable_voyagergx_irq(unsigned int irq) { - unsigned long flags, val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + unsigned long val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); - local_irq_save(flags); val = inl(VOYAGER_INT_MASK); val &= ~mask; outl(val, VOYAGER_INT_MASK); - local_irq_restore(flags); } - static void enable_voyagergx_irq(unsigned int irq) { - unsigned long flags, val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + unsigned long val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); - local_irq_save(flags); val = inl(VOYAGER_INT_MASK); val |= mask; outl(val, VOYAGER_INT_MASK); - local_irq_restore(flags); } - static void mask_and_ack_voyagergx(unsigned int irq) { disable_voyagergx_irq(irq); @@ -95,7 +88,8 @@ static struct hw_interrupt_type voyagergx_irq_type = { .end = end_voyagergx_irq, }; -static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, + struct pt_regs *regs) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", @@ -103,9 +97,6 @@ static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *re return IRQ_HANDLED; } - -/*====================================================*/ - static struct { int (*func)(int, void *); void *dev; diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c index 139ca88ac9e..66b2fedd7ad 100644 --- a/arch/sh/cchips/voyagergx/setup.c +++ b/arch/sh/cchips/voyagergx/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/module.h> #include <asm/io.h> -#include <asm/rts7751r2d/voyagergx_reg.h> +#include <asm/voyagergx.h> static int __init setup_voyagergx(void) { diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig new file mode 100644 index 00000000000..6b43316d03c --- /dev/null +++ b/arch/sh/configs/landisk_defconfig @@ -0,0 +1,1373 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-sh +# Sun Sep 11 13:00:46 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +CONFIG_SH_LANDISK=y +# CONFIG_SH_TITAN is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH4=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +CONFIG_CPU_SUBTYPE_SH7751=y +CONFIG_CPU_SUBTYPE_SH7751R=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ_BOOL=y +CONFIG_SH_PCLK_FREQ=33333333 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Kernel features +# +CONFIG_KEXEC=y +# CONFIG_PREEMPT is not set +# CONFIG_SMP is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_ISA=y +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +CONFIG_PCI_LEGACY_PROC=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_PROBE=y +CONFIG_PCCARD_NONSTATIC=y + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +# CONFIG_IP_NF_MATCH_CONNBYTES is not set +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_TARGET_CONNMARK=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +CONFIG_ATALK=m +# CONFIG_DEV_APPLETALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_OFFBOARD=y +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_IDEDMA_ONLYDISK=y +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NE2000 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +CONFIG_RS5C313_RTC=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FONT_8x16=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_CMPCI is not set +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_ES1370 is not set +# CONFIG_SOUND_ES1371 is not set +# CONFIG_SOUND_ESSSOLO1 is not set +# CONFIG_SOUND_MAESTRO is not set +# CONFIG_SOUND_MAESTRO3 is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_SOUND_ALI5455 is not set +# CONFIG_SOUND_FORTE is not set +# CONFIG_SOUND_RME96XX is not set +# CONFIG_SOUND_AD1980 is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_OBSOLETE_OSS_USB_DRIVER=y +CONFIG_USB_AUDIO=m +# CONFIG_USB_BLUETOOTH_TTY is not set +CONFIG_USB_MIDI=m +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m +CONFIG_USB_VICAM=m +CONFIG_USB_DSBR=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +CONFIG_UFS_FS=m +CONFIG_UFS_FS_WRITE=y + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig new file mode 100644 index 00000000000..d597fc57154 --- /dev/null +++ b/arch/sh/configs/r7780rp_defconfig @@ -0,0 +1,1099 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-sh +# Sat Jan 7 19:47:53 2006 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R77703DRP is not set +CONFIG_SH_R7780RP=y +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +CONFIG_CPU_SUBTYPE_SH7780=y + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_32BIT=y +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ_BOOL=y +CONFIG_SH_PCLK_FREQ=32000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=6 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +# CONFIG_KEXEC is not set +CONFIG_PREEMPT=y +# CONFIG_SMP is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC2_IRQ=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/hda1" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +CONFIG_BLK_DEV_IDE_SATA=y +CONFIG_BLK_DEV_IDEDISK=m +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=m +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=m +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=m +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_AEC62XX=m +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +CONFIG_BLK_DEV_PDC202XX_NEW=m +# CONFIG_PDC202XX_FORCE is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=m +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=m +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NE2000=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_OBSOLETE_OSS_DRIVER is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/se73180_defconfig b/arch/sh/configs/se73180_defconfig index d217e44c89a..fe19feb95ca 100644 --- a/arch/sh/configs/se73180_defconfig +++ b/arch/sh/configs/se73180_defconfig @@ -78,6 +78,7 @@ CONFIG_SH_73180_SOLUTION_ENGINE=y # CONFIG_SH_SECUREEDGE5410 is not set # CONFIG_SH_HS7751RVOIP is not set # CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set # CONFIG_SH_EDOSK7705 is not set # CONFIG_SH_SH4202_MICRODEV is not set # CONFIG_SH_UNKNOWN is not set diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig new file mode 100644 index 00000000000..948e507b52b --- /dev/null +++ b/arch/sh/configs/se7343_defconfig @@ -0,0 +1,997 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17 +# Mon Aug 7 20:14:44 2006 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SHMEM is not set +CONFIG_SLAB=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System type +# +CONFIG_SOLUTION_ENGINE=y +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +CONFIG_SH_7343_SOLUTION_ENGINE=y +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_7710VOIPGW is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_SHMIN is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +CONFIG_CPU_SUBTYPE_SH7343=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_32BIT=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ=27000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_NE2000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SH7343=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y + +# +# Video Capture Adapters +# + +# +# Video Capture Adapters +# +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Encoders and Decoders +# +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_CX25840 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_EPSON1355 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_MIXER_OSS is not set +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# SuperH devices +# +CONFIG_SH7343_SIU=m +CONFIG_AK4537_CODEC=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig new file mode 100644 index 00000000000..ec9a3034daa --- /dev/null +++ b/arch/sh/configs/sh7710voipgw_defconfig @@ -0,0 +1,913 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17 +# Mon Aug 7 17:07:06 2006 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SHMEM is not set +CONFIG_SLAB=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +CONFIG_SH_7710VOIPGW=y +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_SHMIN is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH3=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +CONFIG_CPU_SUBTYPE_SH7710=y + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x00800000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +# CONFIG_SH_ADC is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ=32768000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_PREEMPT is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +# CONFIG_IP_NF_IRC is not set +# CONFIG_IP_NF_NETBIOS_NS is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_NF_AMANDA is not set +CONFIG_IP_NF_PPTP=m +# CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_QUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=y +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_INGRESS=y + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=y +CONFIG_NET_CLS_TCINDEX=y +CONFIG_NET_CLS_ROUTE4=y +CONFIG_NET_CLS_ROUTE=y +# CONFIG_NET_CLS_FW is not set +CONFIG_NET_CLS_U32=y +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_SOLUTIONENGINE is not set +CONFIG_MTD_SH7710VOIPGW=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_NE2000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +CONFIG_PHONE=y +# CONFIG_PHONE_IXJ is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig new file mode 100644 index 00000000000..382b3bd3963 --- /dev/null +++ b/arch/sh/configs/shmin_defconfig @@ -0,0 +1,827 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17 +# Wed Aug 2 01:45:03 2006 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PTRACE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_UID16 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +# CONFIG_BUG is not set +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SHMEM is not set +# CONFIG_SLAB is not set +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 +CONFIG_SLOB=y +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7709_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +CONFIG_SH_SHMIN=y +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH3=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +CONFIG_CPU_SUBTYPE_SH7706=y +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x00800000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_SH_FPU_EMU is not set +# CONFIG_SH_DSP is not set +# CONFIG_SH_ADC is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ=32000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +# CONFIG_KEXEC is not set +# CONFIG_PREEMPT is not set +# CONFIG_SMP is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00210000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 " + +# +# Bus options +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xa0000000 +CONFIG_MTD_PHYSMAP_LEN=0x80000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_NE2000=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +# CONFIG_SYSFS is not set +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNWIND_INFO is not set +CONFIG_SH_STANDARD_BIOS=y +CONFIG_EARLY_PRINTK=y +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig new file mode 100644 index 00000000000..1db2904de9e --- /dev/null +++ b/arch/sh/configs/titan_defconfig @@ -0,0 +1,1367 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-sh +# Wed Nov 9 00:35:56 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +CONFIG_SH_TITAN=y +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH4=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +CONFIG_CPU_SUBTYPE_SH7751=y +CONFIG_CPU_SUBTYPE_SH7751R=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +CONFIG_MEMORY_START=0x08030000 +CONFIG_MEMORY_SIZE=0x7fd0000 + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ_BOOL=y +CONFIG_SH_PCLK_FREQ=30000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=8 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +# CONFIG_KEXEC is not set +# CONFIG_PREEMPT is not set +# CONFIG_SMP is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x009e0000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +CONFIG_PCI_LEGACY_PROC=y +#CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_ROUTE_FWMARK is not set +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_MULTIPATH_CACHED=y +CONFIG_IP_ROUTE_MULTIPATH_RR=m +CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m +CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m +CONFIG_IP_ROUTE_MULTIPATH_DRR=m +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_NETBIOS_NS=m +CONFIG_IP_NF_TFTP=m +# CONFIG_IP_NF_AMANDA is not set +CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_PHYSDEV is not set +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +# CONFIG_IP6_NF_MATCH_PHYSDEV is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_NET_CLS_IND=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_PEDIT=m +# CONFIG_NET_ACT_SIMP is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=m + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +CONFIG_BLK_SSFDC=y +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=m +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=m +CONFIG_PHYCONTROL=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +CONFIG_CASSINI=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NE2000 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +# CONFIG_8139TOO_8129 is not set +CONFIG_8139_OLD_RX_RESET=y +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_RELAYFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=m + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 0f15216cd39..defc13c37d4 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -11,6 +11,8 @@ config SH_DMA config NR_ONCHIP_DMA_CHANNELS depends on SH_DMA int "Number of on-chip DMAC channels" + default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R + default "12" if CPU_SUBTYPE_SH7780 default "4" help This allows you to specify the number of channels that the on-chip @@ -52,4 +54,3 @@ config DMA_PAGE_OPS_CHANNEL are dual-address capable. endmenu - diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 0f866f8789f..9cb07092418 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -3,7 +3,7 @@ * * G2 bus DMA support * - * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -13,7 +13,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> - +#include <asm/cacheflush.h> #include <asm/mach/sysasic.h> #include <asm/mach/dma.h> #include <asm/dma.h> @@ -47,17 +47,31 @@ struct g2_dma_info { static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800; +#define g2_bytes_remaining(i) \ + ((g2_dma->channel[i].size - \ + g2_dma->status[i].size) & 0x0fffffff) + static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - /* FIXME: Do some meaningful completion work here.. */ - return IRQ_HANDLED; -} + int i; -static struct irqaction g2_dma_irq = { - .name = "g2 DMA handler", - .handler = g2_dma_interrupt, - .flags = IRQF_DISABLED, -}; + for (i = 0; i < G2_NR_DMA_CHANNELS; i++) { + if (g2_dma->status[i].status & 0x20000000) { + unsigned int bytes = g2_bytes_remaining(i); + + if (likely(bytes == 0)) { + struct dma_info *info = dev_id; + struct dma_channel *chan = info->channels + i; + + wake_up(&chan->wait_queue); + + return IRQ_HANDLED; + } + } + } + + return IRQ_NONE; +} static int g2_enable_dma(struct dma_channel *chan) { @@ -135,8 +149,14 @@ static int g2_xfer_dma(struct dma_channel *chan) return 0; } +static int g2_get_residue(struct dma_channel *chan) +{ + return g2_bytes_remaining(chan->chan); +} + static struct dma_ops g2_dma_ops = { .xfer = g2_xfer_dma, + .get_residue = g2_get_residue, }; static struct dma_info g2_dma_info = { @@ -148,13 +168,22 @@ static struct dma_info g2_dma_info = { static int __init g2_dma_init(void) { - setup_irq(HW_EVENT_G2_DMA, &g2_dma_irq); + int ret; + + ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED, + "g2 DMA handler", &g2_dma_info); + if (unlikely(ret)) + return -EINVAL; /* Magic */ g2_dma->wait_state = 27; g2_dma->magic = 0x4659404f; - return register_dmac(&g2_dma_info); + ret = register_dmac(&g2_dma_info); + if (unlikely(ret != 0)) + free_irq(HW_EVENT_G2_DMA, 0); + + return ret; } static void __exit g2_dma_exit(void) @@ -169,4 +198,3 @@ module_exit(g2_dma_exit); MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); MODULE_DESCRIPTION("G2 bus DMA driver"); MODULE_LICENSE("GPL"); - diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 30a580aa7cb..3b0b0f60bb3 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -18,8 +18,8 @@ #include <asm/dma.h> #include <asm/io.h> -static unsigned int xfer_complete = 0; -static int count = 0; +static unsigned int xfer_complete; +static int count; static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -107,4 +107,3 @@ module_exit(pvr2_dma_exit); MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver"); MODULE_LICENSE("GPL"); - diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index e028a2d2a4e..cbbe8bce3d6 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -11,14 +11,10 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include <linux/init.h> -#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/module.h> #include <asm/dreamcast/dma.h> -#include <asm/signal.h> -#include <asm/irq.h> #include <asm/dma.h> #include <asm/io.h> #include "dma-sh.h" @@ -84,18 +80,23 @@ static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs) static int sh_dmac_request_dma(struct dma_channel *chan) { - char name[32]; + if (unlikely(!chan->flags & DMA_TEI_CAPABLE)) + return 0; - snprintf(name, sizeof(name), "DMAC Transfer End (Channel %d)", + chan->name = kzalloc(32, GFP_KERNEL); + if (unlikely(chan->name == NULL)) + return -ENOMEM; + snprintf(chan->name, 32, "DMAC Transfer End (Channel %d)", chan->chan); return request_irq(get_dmte_irq(chan->chan), dma_tei, - IRQF_DISABLED, name, chan); + IRQF_DISABLED, chan->name, chan); } static void sh_dmac_free_dma(struct dma_channel *chan) { free_irq(get_dmte_irq(chan->chan), chan); + kfree(chan->name); } static void @@ -259,7 +260,7 @@ static int __init sh_dmac_init(void) #ifdef CONFIG_CPU_SH4 make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); - if (i < 0) + if (unlikely(i < 0)) return i; #endif @@ -274,7 +275,7 @@ static int __init sh_dmac_init(void) * been set. */ i = dmaor_reset(); - if (i < 0) + if (unlikely(i != 0)) return i; return register_dmac(info); diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 365bc16a4a8..9e00cb8a39e 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -6,7 +6,8 @@ obj-y += pci.o obj-$(CONFIG_PCI_AUTO) += pci-auto.o obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o -obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o +obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o +obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o @@ -14,3 +15,6 @@ obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o +obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o +obj-$(CONFIG_SH_TITAN) += ops-titan.o +obj-$(CONFIG_SH_LANDISK) += ops-landisk.o diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 63b1c6f4b8d..c0af5f7ef41 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -4,7 +4,7 @@ * PCI fixups for the Sega Dreamcast * * Copyright (C) 2001, 2002 M. R. Brown - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002, 2003, 2006 Paul Mundt * * This file originally bore the message (with enclosed-$): * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp @@ -45,36 +45,16 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) printk("PCI: Failed resource fixup\n"); } } - DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources); -void __init pcibios_fixup_bus(struct pci_bus *bus) +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) { - /* - * We don't have any sub bus to fix up, and this is a rather - * stupid place to put general device fixups. Don't do it. - * Use the pcibios_fixups table or suffer the consequences. + /* + * The interrupt routing semantics here are quite trivial. + * + * We basically only support one interrupt, so we only bother + * updating a device's interrupt line with this single shared + * interrupt. Keeps routing quite simple, doesn't it? */ + return GAPSPCI_IRQ; } - -void __init pcibios_fixup_irqs(void) -{ - struct pci_dev *dev = 0; - - for_each_pci_dev(dev) { - /* - * The interrupt routing semantics here are quite trivial. - * - * We basically only support one interrupt, so we only bother - * updating a device's interrupt line with this single shared - * interrupt. Keeps routing quite simple, doesn't it? - */ - printk(KERN_NOTICE "PCI: Fixing up IRQ routing for device %s\n", - pci_name(dev)); - - dev->irq = GAPSPCI_IRQ; - - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c new file mode 100644 index 00000000000..3e321df65d2 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -0,0 +1,45 @@ +/* + * arch/sh/drivers/pci/fixups-r7780rp.c + * + * Highlander R7780RP-1 PCI fixups + * + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include "pci-sh4.h" +#include <asm/io.h> + +int pci_fixup_pcic(void) +{ + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); + + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); + + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); + + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); + + return 0; +} diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 0c590fc7a08..e72ceb560d5 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -10,8 +10,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include "pci-sh7751.h" -#include <asm/io.h> +#include "pci-sh4.h" #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB @@ -22,22 +21,23 @@ int pci_fixup_pcic(void) bcr1 = inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - outl(bcr1, PCI_REG(SH7751_PCIBCR1)); + pci_write_reg(bcr1, SH4_PCIBCR1); /* Enable all interrupts, so we known what to fix */ - outl(0x0000c3ff, PCI_REG(SH7751_PCIINTM)); - outl(0x0000380f, PCI_REG(SH7751_PCIAINTM)); + pci_write_reg(0x0000c3ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); - outl(0xfb900047, PCI_REG(SH7751_PCICONF1)); - outl(0xab000001, PCI_REG(SH7751_PCICONF4)); + pci_write_reg(0xfb900047, SH7751_PCICONF1); + pci_write_reg(0xab000001, SH7751_PCICONF4); mcr = inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - outl(mcr, PCI_REG(SH7751_PCIMCR)); + pci_write_reg(mcr, SH4_PCIMCR); + + pci_write_reg(0x0c000000, SH7751_PCICONF5); + pci_write_reg(0xd0000000, SH7751_PCICONF6); + pci_write_reg(0x0c000000, SH4_PCILAR0); + pci_write_reg(0x00000000, SH4_PCILAR1); - outl(0x0c000000, PCI_REG(SH7751_PCICONF5)); - outl(0xd0000000, PCI_REG(SH7751_PCICONF6)); - outl(0x0c000000, PCI_REG(SH7751_PCILAR0)); - outl(0x00000000, PCI_REG(SH7751_PCILAR1)); return 0; } diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c index 57ac26c2171..2e8a18b7ee5 100644 --- a/arch/sh/drivers/pci/fixups-sh03.c +++ b/arch/sh/drivers/pci/fixups-sh03.c @@ -3,11 +3,7 @@ #include <linux/types.h> #include <linux/pci.h> -/* - * IRQ functions - */ - -int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -17,8 +13,9 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) case 8: return 5; /* eth1 */ case 6: return 2; /* PCI bridge */ default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return 2; + printk(KERN_ERR "PCI: Bad IRQ mapping request " + "for slot %d\n", slot); + return 2; } } else { switch (pin) { @@ -32,30 +29,3 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) } return irq; } - -static u8 __init sh03_no_swizzle(struct pci_dev *dev, u8 *pin) -{ - /* no swizzling */ - return PCI_SLOT(dev->devfn); -} - -static int sh03_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - irq = pcibios_map_platform_irq(slot, pin, dev); - if( irq < 0 ) { - pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(sh03_no_swizzle, sh03_pci_lookup_irq); -} diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c index ae82c6ca05e..5da501bd77b 100644 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ b/arch/sh/drivers/pci/ops-bigsur.c @@ -10,15 +10,12 @@ * * PCI initialization for the Hitachi Big Sur Evaluation Board */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/pci.h> - #include <asm/io.h> -#include "pci-sh7751.h" +#include "pci-sh4.h" #include <asm/bigsur/bigsur.h> #define BIGSUR_PCI_IO 0x4000 @@ -41,11 +38,11 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { 0, } }; -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS3_BASE_ADDR, .size = BIGSUR_LSR0_SIZE, @@ -58,7 +55,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = { }; /* - * Initialize the Big Sur PCI interface + * Initialize the Big Sur PCI interface * Setup hardware to be Central Funtion * Copy the BSR regs to the PCI interface * Setup PCI windows into local RAM @@ -68,15 +65,15 @@ int __init pcibios_init_platform(void) return sh7751_pcic_init(&sh7751_pci_map); } -int pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - /* + /* * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI * interface is on the wrong end of the board so that it can also * support a V320 CPI interface chip... Therefor the IRQ mapping is * somewhat use dependent... I'l assume a linear map for now, i.e. * INTA=slot0,pin0... INTD=slot3,pin0... - */ + */ int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", @@ -84,4 +81,3 @@ int pcibios_map_platform_irq(u8 slot, u8 pin) return irq; } - diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c new file mode 100644 index 00000000000..ada301c21fe --- /dev/null +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -0,0 +1,68 @@ +/* + * arch/sh/drivers/pci/ops-landisk.c + * + * PCI initialization for the I-O DATA Device, Inc. LANDISK board + * + * Copyright (C) 2006 kogiidena + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include "pci-sh4.h" + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = 0x4000, + .end = 0x4000 + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, + {NULL, NULL, NULL, 0, 0}, +}; + +static struct sh4_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = (64 << 20), /* 64MB */ + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7751_pcic_init(&sh7751_pci_map); +} + +int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + /* + * slot0: pin1-4 = irq5,6,7,8 + * slot1: pin1-4 = irq6,7,8,5 + * slot2: pin1-4 = irq7,8,5,6 + * slot3: pin1-4 = irq8,5,6,7 + */ + int irq = ((slot + pin - 1) & 0x3) + 5; + + if ((slot | (pin - 1)) > 0x3) { + printk("PCI: Bad IRQ mapping request for slot %d pin %c\n", + slot, pin - 1 + 'A'); + return -1; + } + return irq; +} diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c new file mode 100644 index 00000000000..554d5ed2c58 --- /dev/null +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -0,0 +1,75 @@ +/* + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/r7780rp/r7780rp.h> +#include <asm/io.h> +#include "pci-sh4.h" + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + switch (slot) { + case 0: return IRQ_PCISLOT1; /* PCI Interrupt #1 */ + case 1: return IRQ_PCISLOT2; /* PCI Interrupt #2 */ + case 2: return IRQ_PCISLOT3; /* PCI Interrupt #3 */ + case 3: return IRQ_PCISLOT4; /* PCI Interrupt E4 */ + default: + printk(KERN_ERR "PCI: Bad IRQ mapping " + "request for slot %d, func %d\n", slot, pin-1); + return -1; + } +} + +static struct resource sh7780_io_resource = { + .name = "SH7780_IO", + .start = 0x2000, + .end = 0x2000 + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7780_mem_resource = { + .name = "SH7780_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7780_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7780_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7780_pcic_init(&sh7780_pci_map); +} diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 83171d10141..88f44e24542 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -17,12 +17,11 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/module.h> - -#include <asm/io.h> -#include "pci-sh7751.h" #include <asm/rts7751r2d/rts7751r2d.h> +#include <asm/io.h> +#include "pci-sh4.h" -int __init pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { switch (slot) { case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */ @@ -52,12 +51,12 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS3_BASE_ADDR, .size = 0x04000000, @@ -68,7 +67,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = { .size = 0x00000000, /* Unused */ }, - .flags = SH7751_PCIC_NO_RESET, + .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c new file mode 100644 index 00000000000..2d4371009a5 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -0,0 +1,164 @@ +/* + * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780). + * + * Copyright (C) 2002 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include <asm/addrspace.h> +#include <asm/io.h> +#include "pci-sh4.h" + +/* + * Direct access to PCI hardware... + */ +#define CONFIG_CMD(bus, devfn, where) \ + P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3)) + +static DEFINE_SPINLOCK(sh4_pci_lock); + +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ +static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 data; + + /* + * PCIPDR may only be accessed as 32 bit words, + * so we must do byte alignment by hand + */ + spin_lock_irqsave(&sh4_pci_lock, flags); + pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(SH4_PCIPDR); + spin_unlock_irqrestore(&sh4_pci_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 2) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Since SH4 only does 32bit access we'll have to do a read, + * mask,write operation. + * We'll allow an odd byte offset, though it should be illegal. + */ +static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int shift; + u32 data; + + spin_lock_irqsave(&sh4_pci_lock, flags); + pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(SH4_PCIPDR); + spin_unlock_irqrestore(&sh4_pci_lock, flags); + + switch (size) { + case 1: + shift = (where & 3) << 3; + data &= ~(0xff << shift); + data |= ((val & 0xff) << shift); + break; + case 2: + shift = (where & 2) << 3; + data &= ~(0xffff << shift); + data |= ((val & 0xffff) << shift); + break; + case 4: + data = val; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + pci_write_reg(data, SH4_PCIPDR); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sh4_pci_ops = { + .read = sh4_pci_read, + .write = sh4_pci_write, +}; + +/* + * Not really related to pci_ops, but it's common and not worth shoving + * somewhere else for now.. + */ +static unsigned int pci_probe = PCI_PROBE_CONF1; + +int __init sh4_pci_check_direct(void) +{ + /* + * Check if configuration works. + */ + if (pci_probe & PCI_PROBE_CONF1) { + unsigned int tmp = pci_read_reg(SH4_PCIPAR); + + pci_write_reg(P1SEG, SH4_PCIPAR); + + if (pci_read_reg(SH4_PCIPAR) == P1SEG) { + pci_write_reg(tmp, SH4_PCIPAR); + printk(KERN_INFO "PCI: Using configuration type 1\n"); + request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1"); + + return 0; + } + + pci_write_reg(tmp, SH4_PCIPAR); + } + + pr_debug("PCI: pci_check_direct failed\n"); + return -EINVAL; +} + +/* Handle generic fixups */ +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i = 0; i < 4; i++) { + struct resource *r = &d->resource[i]; + + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +char * __init pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + + return str; +} diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index 3cbd14dd28f..53dd893d4e5 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -2,7 +2,7 @@ * arch/sh/drivers/pci/ops-snapgear.c * * Author: David McCullough <davidm@snapgear.com> - * + * * Ported to new API by Paul Mundt <lethal@linux-sh.org> * * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. @@ -12,15 +12,11 @@ * * PCI initialization for the SnapGear boards */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/pci.h> - -#include <asm/io.h> -#include "pci-sh7751.h" +#include "pci-sh4.h" #define SNAPGEAR_PCI_IO 0x4000 #define SNAPGEAR_PCI_MEM 0xfd000000 @@ -43,14 +39,12 @@ static struct resource sh7751_mem_resource = { .flags = IORESOURCE_MEM, }; -extern struct pci_ops sh7751_pci_ops; - struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { 0, } }; -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS2_BASE_ADDR, .size = SNAPGEAR_LSR0_SIZE, @@ -61,11 +55,11 @@ static struct sh7751_pci_address_map sh7751_pci_map = { .size = SNAPGEAR_LSR1_SIZE, }, - .flags = SH7751_PCIC_NO_RESET, + .flags = SH4_PCIC_NO_RESET, }; /* - * Initialize the SnapGear PCI interface + * Initialize the SnapGear PCI interface * Setup hardware to be Central Funtion * Copy the BSR regs to the PCI interface * Setup PCI windows into local RAM @@ -75,7 +69,7 @@ int __init pcibios_init_platform(void) return sh7751_pcic_init(&sh7751_pci_map); } -int __init pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { int irq = -1; @@ -98,4 +92,3 @@ void __init pcibios_fixup(void) { /* Nothing to fixup .. */ } - diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c new file mode 100644 index 00000000000..c6097bcd97f --- /dev/null +++ b/arch/sh/drivers/pci/ops-titan.c @@ -0,0 +1,83 @@ +/* + * arch/sh/drivers/pci/ops-titan.c + * + * Ported to new API by Paul Mundt <lethal@linux-sh.org> + * + * Modified from ops-snapgear.c written by David McCullough + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Titan boards + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/titan.h> +#include "pci-sh4.h" + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + int irq = -1; + + switch (slot) { + case 0: irq = TITAN_IRQ_WAN; break; /* eth0 (WAN) */ + case 1: irq = TITAN_IRQ_LAN; break; /* eth1 (LAN) */ + case 2: irq = TITAN_IRQ_MPCIA; break; /* mPCI A */ + case 3: irq = TITAN_IRQ_MPCIB; break; /* mPCI B */ + case 4: irq = TITAN_IRQ_USB; break; /* USB */ + default: + printk(KERN_INFO "PCI: Bad IRQ mapping " + "request for slot %d\n", slot); + return -1; + } + + printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", + slot, pin - 1 + 'A', irq); + + return irq; +} + +static struct resource sh7751_io_resource = { + .name = "SH7751_IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS2_BASE_ADDR, + .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */ + }, + + .window1 = { + .base = SH7751_CS2_BASE_ADDR, + .size = SH7751_MEM_REGION_SIZE*2, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7751_pcic_init(&sh7751_pci_map); +} diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index 4cef4d1d8c8..ecf16344f94 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -45,11 +45,11 @@ #include <linux/types.h> #include <linux/pci.h> -#undef DEBUG -#ifdef DEBUG +#define DEBUG +#ifdef DEBUG #define DBG(x...) printk(x) #else -#define DBG(x...) +#define DBG(x...) #endif /* @@ -102,7 +102,7 @@ static u32 pciauto_upper_iospc; static u32 pciauto_lower_memspc; static u32 pciauto_upper_memspc; -static void __init +static void __init pciauto_setup_bars(struct pci_channel *hose, int top_bus, int current_bus, @@ -116,7 +116,6 @@ pciauto_setup_bars(struct pci_channel *hose, int found_mem64 = 0; for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) u32 bar_addr; /* Read the old BAR value */ @@ -125,7 +124,6 @@ pciauto_setup_bars(struct pci_channel *hose, pci_devfn, bar, &bar_addr); -#endif /* Tickle the BAR and get the response */ early_write_config_dword(hose, top_bus, @@ -140,8 +138,7 @@ pciauto_setup_bars(struct pci_channel *hose, bar, &bar_response); -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) - /* + /* * Write the old BAR value back out, only update the BAR * if we implicitly want resources to be updated, which * is done by the generic code further down. -- PFM. @@ -151,7 +148,6 @@ pciauto_setup_bars(struct pci_channel *hose, pci_devfn, bar, bar_addr); -#endif /* If BAR is not implemented go to the next BAR */ if (!bar_response) @@ -177,7 +173,7 @@ retry: PCI_BASE_ADDRESS_MEM_TYPE_64) found_mem64 = 1; - addr_mask = PCI_BASE_ADDRESS_MEM_MASK; + addr_mask = PCI_BASE_ADDRESS_MEM_MASK; upper_limit = &pciauto_upper_memspc; lower_limit = &pciauto_lower_memspc; DBG(" Mem"); @@ -193,22 +189,22 @@ retry: if ((bar_value + bar_size) > *upper_limit) { if (bar_response & PCI_BASE_ADDRESS_SPACE) { if (io_resource_inuse->child) { - io_resource_inuse = + io_resource_inuse = io_resource_inuse->child; - pciauto_lower_iospc = + pciauto_lower_iospc = io_resource_inuse->start; - pciauto_upper_iospc = + pciauto_upper_iospc = io_resource_inuse->end + 1; goto retry; } } else { if (mem_resource_inuse->child) { - mem_resource_inuse = + mem_resource_inuse = mem_resource_inuse->child; - pciauto_lower_memspc = + pciauto_lower_memspc = mem_resource_inuse->start; - pciauto_upper_memspc = + pciauto_upper_memspc = mem_resource_inuse->end + 1; goto retry; } @@ -230,7 +226,7 @@ retry: * If we are a 64-bit decoder then increment to the * upper 32 bits of the bar and force it to locate * in the lower 4GB of memory. - */ + */ if (found_mem64) { bar += 4; early_write_config_dword(hose, top_bus, @@ -362,7 +358,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, { u32 temp; -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) /* * [jsun] we always bump up baselines a little, so that if there * nothing behind P2P bridge, we don't wind up overlapping IO/MEM @@ -370,7 +365,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, */ pciauto_lower_memspc += 1; pciauto_lower_iospc += 1; -#endif /* * Configure subordinate bus number. The PCI subsystem @@ -396,11 +390,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, * configured by this routine to happily live behind a * P2P bridge in a system. */ -#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) - pciauto_lower_memspc += 0x00400000; - pciauto_lower_iospc += 0x00004000; -#endif - /* Align memory and I/O to 4KB and 4 byte boundaries. */ pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) & ~(0x1000 - 1); @@ -433,12 +422,12 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) int devfn_stop = 0xff; sub_bus = current_bus; - + if (hose->first_devfn) devfn_start = hose->first_devfn; if (hose->last_devfn) devfn_stop = hose->last_devfn; - + for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { if (PCI_FUNC(pci_devfn) && !found_multi) @@ -471,9 +460,6 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { DBG(" Bridge: primary=%.2x, secondary=%.2x\n", current_bus, sub_bus + 1); -#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1); -#endif pciauto_prescan_setup_bridge(hose, top_bus, current_bus, pci_devfn, sub_bus); DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", @@ -490,10 +476,10 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); /* Place CardBus Socket/ExCA registers */ pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0); - + pciauto_prescan_setup_cardbus_bridge(hose, top_bus, current_bus, pci_devfn, sub_bus); - + DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", sub_bus + 1, pciauto_lower_iospc, pciauto_lower_memspc); diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h new file mode 100644 index 00000000000..5a61d6041f2 --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -0,0 +1,180 @@ +#ifndef __PCI_SH4_H +#define __PCI_SH4_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7780 +#include "pci-sh7780.h" +#else +#include "pci-sh7751.h" +#endif + +#include <asm/io.h> + +/* startup values */ +#define PCI_PROBE_BIOS 1 +#define PCI_PROBE_CONF1 2 +#define PCI_PROBE_CONF2 4 +#define PCI_NO_SORT 0x100 +#define PCI_BIOS_SORT 0x200 +#define PCI_NO_CHECKS 0x400 +#define PCI_ASSIGN_ROMS 0x1000 +#define PCI_BIOS_IRQ_SCAN 0x2000 + +#define SH4_PCICR 0x100 /* PCI Control Register */ + #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ + #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */ + #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */ + #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */ + #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */ + #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ + #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */ + #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */ + #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */ + #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */ + #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ +#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */ +#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */ +#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */ +#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */ +#define SH4_PCIINT 0x114 /* PCI Interrupt Register */ + #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */ + #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */ + #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */ + #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */ + #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */ + #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */ + #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */ + #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */ + #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */ + #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */ + #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ + #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */ +#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */ +#define SH4_PCIALR 0x11C /* Error Address Register */ +#define SH4_PCICLR 0x120 /* Error Command/Data */ + #define SH4_PCICLR_MPIO 0x80000000 + #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */ + #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */ + #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */ + #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */ + #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */ + #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */ +#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */ + #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ + #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ + #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ + #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */ + #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */ + #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ + #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */ +#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ +#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */ + #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */ + #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */ + #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */ + #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */ + #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */ +#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */ + #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */ +#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */ +#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */ +#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */ +#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */ + #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */ + #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */ + #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/ + #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */ + #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */ + #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/ + #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */ + #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */ + #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */ + #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */ +#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */ +#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */ +#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */ +#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */ +#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */ +#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */ +#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */ +#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */ +#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */ +#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */ +#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */ +#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */ +#define SH4_PCIPAR 0x1C0 /* PIO Address Register */ + #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */ + #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */ + #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */ + #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */ +#define SH4_PCIMBR 0x1C4 /* Memory Base Address */ + #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */ + #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */ +#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */ + #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ + #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */ +#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ + #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */ + #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */ +#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ +#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */ + #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */ + #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */ +/* For definitions of BCR, MCR see ... */ +#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */ + #define SH4_PCIMBR0 SH4_PCIBCR1 +#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */ + #define SH4_PCIMBMR0 SH4_PCIBCR2 +#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */ +#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */ +#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */ + #define SH4_PCIMBR2 SH4_PCIWCR3 +#define SH4_PCIMCR 0x1F4 /* Memory Control Register */ +#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */ +#define SH4_PCIPCTR 0x200 /* Port Control Register */ + #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */ + #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */ + #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */ + #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */ + #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */ + #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */ + #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */ + #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */ + #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */ +#define SH4_PCIPDTR 0x204 /* Port Data Register */ + #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */ + #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */ + #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */ + #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */ + #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */ + #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ +#define SH4_PCIPDR 0x220 /* Port IO Data Register */ + +/* Flags */ +#define SH4_PCIC_NO_RESET 0x0001 + +/* arch/sh/kernel/drivers/pci/ops-sh4.c */ +extern struct pci_ops sh4_pci_ops; +int sh4_pci_check_direct(void); +int pci_fixup_pcic(void); + +struct sh4_pci_address_space { + unsigned long base; + unsigned long size; +}; + +struct sh4_pci_address_map { + struct sh4_pci_address_space window0; + struct sh4_pci_address_space window1; + unsigned long flags; +}; + +static inline void pci_write_reg(unsigned long val, unsigned long reg) +{ + outl(val, PCI_REG(reg)); +} + +static inline unsigned long pci_read_reg(unsigned long reg) +{ + return inl(PCI_REG(reg)); +} +#endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 682f3dae305..dbe83788498 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -15,180 +15,14 @@ #undef DEBUG -#include <linux/types.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> +#include <linux/types.h> #include <linux/errno.h> -#include <linux/irq.h> #include <linux/delay.h> - -#include <asm/machvec.h> +#include "pci-sh4.h" +#include <asm/addrspace.h> #include <asm/io.h> -#include "pci-sh7751.h" - -static unsigned int pci_probe = PCI_PROBE_CONF1; -extern int pci_fixup_pcic(void); - -void pcibios_fixup_irqs(void) __attribute__ ((weak)); - -/* - * Direct access to PCI hardware... - */ - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int sh7751_pci_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - unsigned long flags; - u32 data; - - /* - * PCIPDR may only be accessed as 32 bit words, - * so we must do byte alignment by hand - */ - local_irq_save(flags); - outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR)); - data = inl(PCI_REG(SH7751_PCIPDR)); - local_irq_restore(flags); - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xff; - break; - case 2: - *val = (data >> ((where & 2) << 3)) & 0xffff; - break; - case 4: - *val = data; - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * Since SH7751 only does 32bit access we'll have to do a read, - * mask,write operation. - * We'll allow an odd byte offset, though it should be illegal. - */ -static int sh7751_pci_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - unsigned long flags; - int shift; - u32 data; - - local_irq_save(flags); - outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR)); - data = inl(PCI_REG(SH7751_PCIPDR)); - local_irq_restore(flags); - - switch (size) { - case 1: - shift = (where & 3) << 3; - data &= ~(0xff << shift); - data |= ((val & 0xff) << shift); - break; - case 2: - shift = (where & 2) << 3; - data &= ~(0xffff << shift); - data |= ((val & 0xffff) << shift); - break; - case 4: - data = val; - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - outl(data, PCI_REG(SH7751_PCIPDR)); - - return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -struct pci_ops sh7751_pci_ops = { - .read = sh7751_pci_read, - .write = sh7751_pci_write, -}; - -static int __init pci_check_direct(void) -{ - unsigned int tmp, id; - - /* check for SH7751/SH7751R hardware */ - id = inl(SH7751_PCIREG_BASE+SH7751_PCICONF0); - if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && - id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { - pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); - return -ENODEV; - } - - /* - * Check if configuration works. - */ - if (pci_probe & PCI_PROBE_CONF1) { - tmp = inl (PCI_REG(SH7751_PCIPAR)); - outl (0x80000000, PCI_REG(SH7751_PCIPAR)); - if (inl (PCI_REG(SH7751_PCIPAR)) == 0x80000000) { - outl (tmp, PCI_REG(SH7751_PCIPAR)); - printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(PCI_REG(SH7751_PCIPAR), 8, "PCI conf1"); - return 0; - } - outl (tmp, PCI_REG(SH7751_PCIPAR)); - } - - pr_debug("PCI: pci_check_direct failed\n"); - return -EINVAL; -} - -/***************************************************************************************/ - -/* - * Handle bus scanning and fixups .... - */ - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void __init pcibios_fixup_bus(struct pci_bus *b) -{ - pci_read_bridge_bases(b); -} /* * Initialization. Try all known PCI access methods. Note that we support @@ -196,25 +30,29 @@ void __init pcibios_fixup_bus(struct pci_bus *b) * to access config space. * * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it - * exitst and via the platform defined function pcibios_init_platform(). - * See pci_bigsur.c for implementation; - * - * The BIOS version of the pci functions is not yet implemented but it is left - * in for completeness. Currently an error will be genereated at compile time. + * space mapping) will be called via the platform defined function + * pcibios_init_platform(). */ - static int __init sh7751_pci_init(void) { + unsigned int id; int ret; pr_debug("PCI: Starting intialization.\n"); - if ((ret = pci_check_direct()) != 0) + + /* check for SH7751/SH7751R hardware */ + id = pci_read_reg(SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); + return -ENODEV; + } + + if ((ret = sh4_pci_check_direct()) != 0) return ret; return pcibios_init_platform(); } - subsys_initcall(sh7751_pci_init); static int __init __area_sdram_check(unsigned int area) @@ -223,26 +61,26 @@ static int __init __area_sdram_check(unsigned int area) word = inl(SH7751_BCR1); /* check BCR for SDRAM in area */ - if(((word >> area) & 1) == 0) { + if (((word >> area) & 1) == 0) { printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", area, word); return 0; } - outl(word, PCI_REG(SH7751_PCIBCR1)); + pci_write_reg(word, SH4_PCIBCR1); word = (u16)inw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ - if(((word >> (area << 1)) & 0x3) != 0x3) { + if (((word >> (area << 1)) & 0x3) != 0x3) { printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", area, word); return 0; } - outl(word, PCI_REG(SH7751_PCIBCR2)); + pci_write_reg(word, SH4_PCIBCR2); return 1; } -int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) +int __init sh7751_pcic_init(struct sh4_pci_address_map *map) { u32 reg; u32 word; @@ -251,39 +89,39 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) reg = inl(SH7751_BCR1); reg |= 0x80000; outl(reg, SH7751_BCR1); - + /* Turn the clocks back on (not done in reset)*/ - outl(0, PCI_REG(SH7751_PCICLKR)); + pci_write_reg(0, SH4_PCICLKR); /* Clear Powerdown IRQ's (not done in reset) */ - word = SH7751_PCIPINT_D3 | SH7751_PCIPINT_D0; - outl(word, PCI_REG(SH7751_PCIPINT)); + word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; + pci_write_reg(word, SH4_PCIPINT); /* * This code is unused for some boards as it is done in the * bootloader and doing it here means the MAC addresses loaded * by the bootloader get lost. */ - if (!(map->flags & SH7751_PCIC_NO_RESET)) { + if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ - word = SH7751_PCICR_PREFIX | SH7751_PCICR_PRST; - outl(word,PCI_REG(SH7751_PCICR)); + word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; + pci_write_reg(word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); - word = SH7751_PCICR_PREFIX; - outl(word,PCI_REG(SH7751_PCICR)); + word = SH4_PCICR_PREFIX; + pci_write_reg(word, SH4_PCICR); } - + /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; - outl(word, PCI_REG(SH7751_PCICONF1)); + pci_write_reg(word, SH7751_PCICONF1); /* define this host as the host bridge */ - word = SH7751_PCI_HOST_BRIDGE << 24; - outl(word, PCI_REG(SH7751_PCICONF2)); + word = PCI_BASE_CLASS_BRIDGE << 24; + pci_write_reg(word, SH7751_PCICONF2); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping @@ -291,46 +129,49 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) * Window1 = map->window1.size @ cached area base = SDRAM */ word = map->window0.size - 1; - outl(word, PCI_REG(SH7751_PCILSR0)); + pci_write_reg(word, SH4_PCILSR0); word = map->window1.size - 1; - outl(word, PCI_REG(SH7751_PCILSR1)); + pci_write_reg(word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ word = P2SEGADDR(map->window0.base); - outl(word, PCI_REG(SH7751_PCILAR0)); - outl(word, PCI_REG(SH7751_PCICONF5)); + pci_write_reg(word, SH4_PCILAR0); + pci_write_reg(word, SH7751_PCICONF5); /* Set the values on window 1 PCI config registers */ word = PHYSADDR(map->window1.base); - outl(word, PCI_REG(SH7751_PCILAR1)); - outl(word, PCI_REG(SH7751_PCICONF6)); + pci_write_reg(word, SH4_PCILAR1); + pci_write_reg(word, SH7751_PCICONF6); - /* Set the local 16MB PCI memory space window to + /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ - word = PCIBIOS_MIN_MEM & SH7751_PCIMBR_MASK; - PCIDBG(2,"PCI: Setting upper bits of Memory window to 0x%x\n", word); - outl(word , PCI_REG(SH7751_PCIMBR)); + word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; + pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); + pci_write_reg(word , SH4_PCIMBR); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size - * IO addresses will be translated to the + * IO addresses will be translated to the * PCI IO window base address */ - PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, - (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO); + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + PCIBIOS_MIN_IO, (64 << 10), + SH4_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* + /* * XXX: For now, leave this board-specific. In the event we have other * boards that need to do similar work, this can be wrapped. */ #ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO,0); + bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), + SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); #endif - /* Make sure the MSB's of IO window are set to access PCI space correctly */ - word = PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK; - PCIDBG(2,"PCI: Setting upper bits of IO window to 0x%x\n", word); - outl(word, PCI_REG(SH7751_PCIIOBR)); - + /* Make sure the MSB's of IO window are set to access PCI space + * correctly */ + word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; + pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); + pci_write_reg(word, SH4_PCIIOBR); + /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ @@ -349,13 +190,13 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) /* configure the wait control registers */ word = inl(SH7751_WCR1); - outl(word, PCI_REG(SH7751_PCIWCR1)); + pci_write_reg(word, SH4_PCIWCR1); word = inl(SH7751_WCR2); - outl(word, PCI_REG(SH7751_PCIWCR2)); + pci_write_reg(word, SH4_PCIWCR2); word = inl(SH7751_WCR3); - outl(word, PCI_REG(SH7751_PCIWCR3)); + pci_write_reg(word, SH4_PCIWCR3); word = inl(SH7751_MCR); - outl(word, PCI_REG(SH7751_PCIMCR)); + pci_write_reg(word, SH4_PCIMCR); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and @@ -368,49 +209,8 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) /* SH7751 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ - word = SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN | SH7751_PCICR_ARBM; - outl(word,PCI_REG(SH7751_PCICR)); + word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; + pci_write_reg(word, SH4_PCICR); return 1; } - -char * __init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - - return str; -} - -/* - * IRQ functions - */ -static u8 __init sh7751_no_swizzle(struct pci_dev *dev, u8 *pin) -{ - /* no swizzling */ - return PCI_SLOT(dev->devfn); -} - -static int sh7751_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - irq = pcibios_map_platform_irq(slot,pin); - if( irq < 0 ) { - pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(sh7751_no_swizzle, sh7751_pci_lookup_irq); -} - diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 1fee5cae10d..68e3cb5e6be 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -3,7 +3,7 @@ * * Dustin McIntire (dustin@sensoria.com) (c) 2001 * Paul Mundt (lethal@linux-sh.org) (c) 2003 - * + * * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * @@ -12,28 +12,6 @@ #ifndef _PCI_SH7751_H_ #define _PCI_SH7751_H_ -#include <linux/pci.h> - -/* set debug level 4=verbose...1=terse */ -//#define DEBUG_PCI 3 -#undef DEBUG_PCI - -#ifdef DEBUG_PCI -#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } -#else -#define PCIDBG(n, x...) -#endif - -/* startup values */ -#define PCI_PROBE_BIOS 1 -#define PCI_PROBE_CONF1 2 -#define PCI_PROBE_CONF2 4 -#define PCI_NO_SORT 0x100 -#define PCI_BIOS_SORT 0x200 -#define PCI_NO_CHECKS 0x400 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 - /* Platform Specific Values */ #define SH7751_VENDOR_ID 0x1054 #define SH7751_DEVICE_ID 0x3505 @@ -128,131 +106,6 @@ #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */ #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */ /* SH7715 Internal PCI Registers */ -#define SH7751_PCICR 0x100 /* PCI Control Register */ - #define SH7751_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ - #define SH7751_PCICR_TRSB 0x00000200 /* Target Read Single */ - #define SH7751_PCICR_BSWP 0x00000100 /* Target Byte Swap */ - #define SH7751_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */ - #define SH7751_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ - #define SH7751_PCICR_MD 0x00000030 /* MD9 and MD10 status */ - #define SH7751_PCICR_SERR 0x00000008 /* SERR output assert */ - #define SH7751_PCICR_INTA 0x00000004 /* INTA output assert */ - #define SH7751_PCICR_PRST 0x00000002 /* PCI Reset Assert */ - #define SH7751_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ -#define SH7751_PCILSR0 0x104 /* PCI Local Space Register0 */ -#define SH7751_PCILSR1 0x108 /* PCI Local Space Register1 */ -#define SH7751_PCILAR0 0x10C /* PCI Local Address Register1 */ -#define SH7751_PCILAR1 0x110 /* PCI Local Address Register1 */ -#define SH7751_PCIINT 0x114 /* PCI Interrupt Register */ - #define SH7751_PCIINT_MLCK 0x00008000 /* Master Lock Error */ - #define SH7751_PCIINT_TABT 0x00004000 /* Target Abort Error */ - #define SH7751_PCIINT_TRET 0x00000200 /* Target Retry Error */ - #define SH7751_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */ - #define SH7751_PCIINT_PRTY 0x00000080 /* Address Parity Error */ - #define SH7751_PCIINT_SERR 0x00000040 /* SERR Detection Error */ - #define SH7751_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */ - #define SH7751_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Error Det. */ - #define SH7751_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */ - #define SH7751_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */ - #define SH7751_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ - #define SH7751_PCIINT_MRPD 0x00000002 /* Master Read PERR Detect */ -#define SH7751_PCIINTM 0x118 /* PCI Interrupt Mask Register */ -#define SH7751_PCIALR 0x11C /* Error Address Register */ -#define SH7751_PCICLR 0x120 /* Error Command/Data Register */ - #define SH7751_PCICLR_MPIO 0x80000000 /* Error Command/Data Register */ - #define SH7751_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */ - #define SH7751_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */ - #define SH7751_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */ - #define SH7751_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */ - #define SH7751_PCICLR_TGT 0x04000000 /* Target Transfer Error */ - #define SH7751_PCICLR_CMDL 0x0000000F /* PCI Command at Error */ -#define SH7751_PCIAINT 0x130 /* Arbiter Interrupt Register */ - #define SH7751_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ - #define SH7751_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ - #define SH7751_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ - #define SH7751_PCIAINT_TABT 0x00000008 /* Target Abort */ - #define SH7751_PCIAINT_MABT 0x00000004 /* Master Abort */ - #define SH7751_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ - #define SH7751_PCIAINT_WDPE 0x00000002 /* Write Data Parity Error */ -#define SH7751_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ -#define SH7751_PCIBMLR 0x138 /* Error Bus Master Register */ - #define SH7751_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */ - #define SH7751_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */ - #define SH7751_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */ - #define SH7751_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */ - #define SH7751_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */ -#define SH7751_PCIDMABT 0x140 /* DMA Transfer Arb. Register */ - #define SH7751_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */ -#define SH7751_PCIDPA0 0x180 /* DMA0 Transfer Addr. Register */ -#define SH7751_PCIDLA0 0x184 /* DMA0 Local Addr. Register */ -#define SH7751_PCIDTC0 0x188 /* DMA0 Transfer Cnt. Register */ -#define SH7751_PCIDCR0 0x18C /* DMA0 Control Register */ - #define SH7751_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */ - #define SH7751_PCIDCR_MAST 0x00000100 /* DMA Termination Type */ - #define SH7751_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/ - #define SH7751_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */ - #define SH7751_PCIDCR_LHLD 0x00000020 /* Local Address Control */ - #define SH7751_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/ - #define SH7751_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */ - #define SH7751_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */ - #define SH7751_PCIDCR_STOP 0x00000002 /* Force DMA Stop */ - #define SH7751_PCIDCR_STRT 0x00000001 /* DMA Start */ -#define SH7751_PCIDPA1 0x190 /* DMA1 Transfer Addr. Register */ -#define SH7751_PCIDLA1 0x194 /* DMA1 Local Addr. Register */ -#define SH7751_PCIDTC1 0x198 /* DMA1 Transfer Cnt. Register */ -#define SH7751_PCIDCR1 0x19C /* DMA1 Control Register */ -#define SH7751_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. Register */ -#define SH7751_PCIDLA2 0x1A4 /* DMA2 Local Addr. Register */ -#define SH7751_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. Register */ -#define SH7751_PCIDCR2 0x1AC /* DMA2 Control Register */ -#define SH7751_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. Register */ -#define SH7751_PCIDLA3 0x1B4 /* DMA3 Local Addr. Register */ -#define SH7751_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. Register */ -#define SH7751_PCIDCR3 0x1BC /* DMA3 Control Register */ -#define SH7751_PCIPAR 0x1C0 /* PIO Address Register */ - #define SH7751_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */ - #define SH7751_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */ - #define SH7751_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */ - #define SH7751_PCIPAR_REGAD 0x000000FC /* Register Address Number */ -#define SH7751_PCIMBR 0x1C4 /* Memory Base Address Register */ - #define SH7751_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */ - #define SH7751_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */ -#define SH7751_PCIIOBR 0x1C8 /* I/O Base Address Register */ - #define SH7751_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ - #define SH7751_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */ -#define SH7751_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ - #define SH7751_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */ - #define SH7751_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */ -#define SH7751_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ -#define SH7751_PCICLKR 0x1D4 /* Clock Ctrl. Register */ - #define SH7751_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */ - #define SH7751_PCICLKR_BCSTP 0x00000002 /* BCLK Clock Stop */ -/* For definitions of BCR, MCR see ... */ -#define SH7751_PCIBCR1 0x1E0 /* Memory BCR1 Register */ -#define SH7751_PCIBCR2 0x1E4 /* Memory BCR2 Register */ -#define SH7751_PCIWCR1 0x1E8 /* Wait Control 1 Register */ -#define SH7751_PCIWCR2 0x1EC /* Wait Control 2 Register */ -#define SH7751_PCIWCR3 0x1F0 /* Wait Control 3 Register */ -#define SH7751_PCIMCR 0x1F4 /* Memory Control Register */ -#define SH7751_PCIBCR3 0x1f8 /* Memory BCR3 Register */ -#define SH7751_PCIPCTR 0x200 /* Port Control Register */ - #define SH7751_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */ - #define SH7751_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */ - #define SH7751_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */ - #define SH7751_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */ - #define SH7751_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */ - #define SH7751_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */ - #define SH7751_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */ - #define SH7751_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */ - #define SH7751_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */ -#define SH7751_PCIPDTR 0x204 /* Port Data Register */ - #define SH7751_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */ - #define SH7751_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */ - #define SH7751_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */ - #define SH7751_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */ - #define SH7751_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */ - #define SH7751_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ -#define SH7751_PCIPDR 0x220 /* Port IO Data Register */ /* Memory Control Registers */ #define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */ @@ -274,30 +127,9 @@ #define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) #define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) -/* General PCI values */ -#define SH7751_PCI_HOST_BRIDGE 0x6 - -/* Flags */ -#define SH7751_PCIC_NO_RESET 0x0001 - -/* External functions defined per platform i.e. Big Sur, SE... (these could be routed - * through the machine vectors... */ -extern int pcibios_init_platform(void); -extern int pcibios_map_platform_irq(u8 slot, u8 pin); - -struct sh7751_pci_address_space { - unsigned long base; - unsigned long size; -}; - -struct sh7751_pci_address_map { - struct sh7751_pci_address_space window0; - struct sh7751_pci_address_space window1; - unsigned long flags; -}; +struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7751.c */ -extern int sh7751_pcic_init(struct sh7751_pci_address_map *map); +int sh7751_pcic_init(struct sh4_pci_address_map *map); #endif /* _PCI_SH7751_H_ */ - diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c new file mode 100644 index 00000000000..bd3064a8208 --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -0,0 +1,139 @@ +/* + * Low-Level PCI Support for the SH7780 + * + * Dustin McIntire (dustin@sensoria.com) + * Derived from arch/i386/kernel/pci-*.c which bore the message: + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + * + * Ported to the new API by Paul Mundt <lethal@linux-sh.org> + * With cleanup by Paul van Gool <pvangool@mimotech.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include "pci-sh4.h" + +/* + * Initialization. Try all known PCI access methods. Note that we support + * using both PCI BIOS and direct access: in such cases, we use I/O ports + * to access config space. + * + * Note that the platform specific initialization (BSC registers, and memory + * space mapping) will be called via the platform defined function + * pcibios_init_platform(). + */ +static int __init sh7780_pci_init(void) +{ + unsigned int id; + int ret; + + pr_debug("PCI: Starting intialization.\n"); + + outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ + + /* check for SH7780/SH7780R hardware */ + id = pci_read_reg(SH7780_PCIVID); + if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) && + (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) { + printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id); + return -ENODEV; + } + + /* Setup the INTC */ + ctrl_outl(0x00200000, INTC_ICR0); /* INTC SH-4 Mode */ + ctrl_outl(0x00078000, INTC_INT2MSKCR); /* enable PCIINTA - PCIINTD */ + ctrl_outl(0x40000000, INTC_INTMSK1); /* disable IRL4-7 Interrupt */ + ctrl_outl(0x0000fffe, INTC_INTMSK2); /* disable IRL4-7 Interrupt */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); /* enable IRL0-3 Interrupt */ + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); /* enable IRL0-3 Interrupt */ + + if ((ret = sh4_pci_check_direct()) != 0) + return ret; + + return pcibios_init_platform(); +} +core_initcall(sh7780_pci_init); + +int __init sh7780_pcic_init(struct sh4_pci_address_map *map) +{ + u32 word; + + /* + * This code is unused for some boards as it is done in the + * bootloader and doing it here means the MAC addresses loaded + * by the bootloader get lost. + */ + if (!(map->flags & SH4_PCIC_NO_RESET)) { + /* toggle PCI reset pin */ + word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; + pci_write_reg(word, SH4_PCICR); + /* Wait for a long time... not 1 sec. but long enough */ + mdelay(100); + word = SH4_PCICR_PREFIX; + pci_write_reg(word, SH4_PCICR); + } + + /* set the command/status bits to: + * Wait Cycle Control + Parity Enable + Bus Master + + * Mem space enable + */ + pci_write_reg(0x00000046, SH7780_PCICMD); + + /* define this host as the host bridge */ + word = PCI_BASE_CLASS_BRIDGE << 24; + pci_write_reg(word, SH7780_PCIRID); + + /* Set IO and Mem windows to local address + * Make PCI and local address the same for easy 1 to 1 mapping + * Window0 = map->window0.size @ non-cached area base = SDRAM + * Window1 = map->window1.size @ cached area base = SDRAM + */ + word = ((map->window0.size - 1) & 0x1ff00001) | 0x01; + pci_write_reg(0x07f00001, SH4_PCILSR0); + word = ((map->window1.size - 1) & 0x1ff00001) | 0x01; + pci_write_reg(0x00000001, SH4_PCILSR1); + /* Set the values on window 0 PCI config registers */ + word = P2SEGADDR(map->window0.base); + pci_write_reg(0xa8000000, SH4_PCILAR0); + pci_write_reg(0x08000000, SH7780_PCIMBAR0); + /* Set the values on window 1 PCI config registers */ + word = P2SEGADDR(map->window1.base); + pci_write_reg(0x00000000, SH4_PCILAR1); + pci_write_reg(0x00000000, SH7780_PCIMBAR1); + + /* Map IO space into PCI IO window + * The IO window is 64K-PCIBIOS_MIN_IO in size + * IO addresses will be translated to the + * PCI IO window base address + */ + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + PCIBIOS_MIN_IO, (64 << 10), + SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO); + + /* NOTE: I'm ignoring the PCI error IRQs for now.. + * TODO: add support for the internal error interrupts and + * DMA interrupts... + */ + +#ifdef CONFIG_SH_R7780RP + pci_fixup_pcic(); +#endif + + /* SH7780 init done, set central function init complete */ + /* use round robin mode to stop a device starving/overruning */ + word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; + pci_write_reg(word, SH4_PCICR); + + return 1; +} diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h new file mode 100644 index 00000000000..f02d2180a4b --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -0,0 +1,94 @@ +/* + * Low-Level PCI Support for SH7780 targets + * + * Dustin McIntire (dustin@sensoria.com) (c) 2001 + * Paul Mundt (lethal@linux-sh.org) (c) 2003 + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#ifndef _PCI_SH7780_H_ +#define _PCI_SH7780_H_ + +/* Platform Specific Values */ +#define SH7780_VENDOR_ID 0x1912 +#define SH7780_DEVICE_ID 0x0002 +#define SH7781_DEVICE_ID 0x0001 + +/* SH7780 Control Registers */ +#define SH7780_PCI_VCR0 0xFE000000 +#define SH7780_PCI_VCR1 0xFE000004 +#define SH7780_PCI_VCR2 0xFE000008 + +/* SH7780 Specific Values */ +#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ +#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */ + +#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */ +#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ + +#define SH7780_PCI_IO_BASE 0xFE400000 /* IO space base address */ +#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ + +#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ +#define PCI_REG(n) (SH7780_PCIREG_BASE+n) + +/* SH7780 PCI Config Registers */ +#define SH7780_PCIVID 0x000 /* Vendor ID */ +#define SH7780_PCIDID 0x002 /* Device ID */ +#define SH7780_PCICMD 0x004 /* Command */ +#define SH7780_PCISTATUS 0x006 /* Status */ +#define SH7780_PCIRID 0x008 /* Revision ID */ +#define SH7780_PCIPIF 0x009 /* Program Interface */ +#define SH7780_PCISUB 0x00a /* Sub class code */ +#define SH7780_PCIBCC 0x00b /* Base class code */ +#define SH7780_PCICLS 0x00c /* Cache line size */ +#define SH7780_PCILTM 0x00d /* latency timer */ +#define SH7780_PCIHDR 0x00e /* Header type */ +#define SH7780_PCIBIST 0x00f /* BIST */ +#define SH7780_PCIIBAR 0x010 /* IO Base address */ +#define SH7780_PCIMBAR0 0x014 /* Memory base address0 */ +#define SH7780_PCIMBAR1 0x018 /* Memory base address1 */ +#define SH7780_PCISVID 0x02c /* Sub system vendor ID */ +#define SH7780_PCISID 0x02e /* Sub system ID */ +#define SH7780_PCICP 0x034 +#define SH7780_PCIINTLINE 0x03c /* Interrupt line */ +#define SH7780_PCIINTPIN 0x03d /* Interrupt pin */ +#define SH7780_PCIMINGNT 0x03e /* Minumum grand */ +#define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */ +#define SH7780_PCICID 0x040 +#define SH7780_PCINIP 0x041 +#define SH7780_PCIPMC 0x042 +#define SH7780_PCIPMCSR 0x044 +#define SH7780_PCIPMCSR_BSE 0x046 +#define SH7780_PCICDD 0x047 + +#define SH7780_PCIMBR0 0x1E0 +#define SH7780_PCIMBMR0 0x1E4 +#define SH7780_PCIMBR2 0x1F0 +#define SH7780_PCIMBMR2 0x1F4 +#define SH7780_PCIIOBR 0x1F8 +#define SH7780_PCIIOBMR 0x1FC +#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */ +#define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */ +#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */ +#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */ + +/* General Memory Config Addresses */ +#define SH7780_CS0_BASE_ADDR 0x0 +#define SH7780_MEM_REGION_SIZE 0x04000000 +#define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE) + +struct sh4_pci_address_map; + +/* arch/sh/drivers/pci/pci-sh7780.c */ +int sh7780_pcic_init(struct sh4_pci_address_map *map); + +#endif /* _PCI_SH7780_H_ */ diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index 7c81b8b65bb..4ab5ea6b35f 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -70,12 +70,6 @@ static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, unsigned long pciOffset, unsigned long regionSize); -/* - * The pcibios_map_platform_irq function is defined in the appropriate - * board specific code and referenced here - */ -extern int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); - static __init void SetPCIPLL(void) { { @@ -422,13 +416,6 @@ struct pci_ops st40pci_config_ops = { /* Everything hangs off this */ static struct pci_bus *pci_root_bus; - -static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) -{ - return PCI_SLOT(dev->devfn); -} - - static int __init pcibios_init(void) { extern unsigned long memory_start, memory_end; @@ -465,17 +452,11 @@ static int __init pcibios_init(void) /* ok, do the scan man */ pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL); pci_assign_unassigned_resources(); - pci_fixup_irqs(no_swizzle, pcibios_map_platform_irq); return 0; } - subsys_initcall(pcibios_init); -void __init pcibios_fixup_bus(struct pci_bus *bus) -{ -} - /* * Publish a region of local address space over the PCI bus * to other devices. diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 3d546ba329c..d439336d2e1 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -1,21 +1,45 @@ -/* arch/sh/kernel/pci.c - * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $ +/* + * arch/sh/drivers/pci/pci.c * * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org> - * - * + * Copyright (c) 2004 - 2006 Paul Mundt <lethal@linux-sh.org> + * * These functions are collected here to reduce duplication of common * code amongst the many platform-specific PCI support code files. - * + * * These routines require the following board-specific routines: * void pcibios_fixup_irqs(); * * See include/asm-sh/pci.h for more information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> +#include <asm/io.h> + +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static u8 __init simple_swizzle(struct pci_dev *dev, u8 *pinp) +{ + u8 pin = *pinp; + + while (dev->bus->parent) { + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + *pinp = pin; + + /* The slot is the slot of the last bridge. */ + return PCI_SLOT(dev->devfn); +} static int __init pcibios_init(void) { @@ -26,26 +50,32 @@ static int __init pcibios_init(void) #ifdef CONFIG_PCI_AUTO /* assign resources */ busno = 0; - for (p = board_pci_channels; p->pci_ops != NULL; p++) { + for (p = board_pci_channels; p->pci_ops != NULL; p++) busno = pciauto_assign_resources(busno, p) + 1; - } #endif /* scan the buses */ busno = 0; - for (p= board_pci_channels; p->pci_ops != NULL; p++) { + for (p = board_pci_channels; p->pci_ops != NULL; p++) { bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate+1; + busno = bus->subordinate + 1; } - /* board-specific fixups */ - pcibios_fixup_irqs(); + pci_fixup_irqs(simple_swizzle, pcibios_map_platform_irq); return 0; } - subsys_initcall(pcibios_init); +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ + pci_read_bridge_bases(bus); +} + void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *res, int resource) @@ -61,13 +91,17 @@ pcibios_update_resource(struct pci_dev *dev, struct resource *root, new |= PCI_ROM_ADDRESS_ENABLE; reg = dev->rom_base_reg; } else { - /* Somebody might have asked allocation of a non-standard resource */ + /* + * Somebody might have asked allocation of a non-standard + * resource + */ return; } - + pci_write_config_dword(dev, reg, new); pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { + if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? + PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { printk(KERN_ERR "PCI: Error while updating region " "%s/%d (%08x != %08x)\n", pci_name(dev), resource, new, check); @@ -145,7 +179,8 @@ void pcibios_set_master(struct pci_dev *dev) lat = pcibios_max_latency; else return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); } @@ -153,3 +188,39 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired + * (typically at 0xfd000000, but is_pci_memaddr() will know + * best). With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index f05cd96f886..5da88a43d35 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -6,9 +6,10 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ - io.o io_generic.o sh_ksyms.o + io.o io_generic.o sh_ksyms.o syscalls.o obj-y += cpu/ timers/ +obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_CF_ENABLER) += cf-enabler.o @@ -18,3 +19,5 @@ obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_APM) += apm.o +obj-$(CONFIG_PM) += pm.o diff --git a/arch/sh/kernel/apm.c b/arch/sh/kernel/apm.c new file mode 100644 index 00000000000..871e7d64000 --- /dev/null +++ b/arch/sh/kernel/apm.c @@ -0,0 +1,539 @@ +/* + * bios-less APM driver for hp680 + * + * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com> + * + * based on ARM APM driver by + * Jamey Hicks <jamey@crl.dec.com> + * + * adapted from the APM BIOS driver for Linux by + * Stephen Rothwell (sfr@linuxcare.com) + * + * APM 1.2 Reference: + * Intel Corporation, Microsoft Corporation. Advanced Power Management + * (APM) BIOS Interface Specification, Revision 1.2, February 1996. + * + * [This document is available from Microsoft at: + * http://www.microsoft.com/hwdev/busbios/amp_12.htm] + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/poll.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/miscdevice.h> +#include <linux/apm_bios.h> +#include <linux/pm.h> +#include <linux/pm_legacy.h> +#include <asm/apm.h> + +#define MODNAME "apm" + +/* + * The apm_bios device is one of the misc char devices. + * This is its minor number. + */ +#define APM_MINOR_DEV 134 + +/* + * Maximum number of events stored + */ +#define APM_MAX_EVENTS 16 + +struct apm_queue { + unsigned int event_head; + unsigned int event_tail; + apm_event_t events[APM_MAX_EVENTS]; +}; + +/* + * The per-file APM data + */ +struct apm_user { + struct list_head list; + + unsigned int suser: 1; + unsigned int writer: 1; + unsigned int reader: 1; + + int suspend_result; + unsigned int suspend_state; +#define SUSPEND_NONE 0 /* no suspend pending */ +#define SUSPEND_PENDING 1 /* suspend pending read */ +#define SUSPEND_READ 2 /* suspend read, pending ack */ +#define SUSPEND_ACKED 3 /* suspend acked */ +#define SUSPEND_DONE 4 /* suspend completed */ + + struct apm_queue queue; +}; + +/* + * Local variables + */ +static int suspends_pending; + +static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); +static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); + +/* + * This is a list of everyone who has opened /dev/apm_bios + */ +static DECLARE_RWSEM(user_list_lock); +static LIST_HEAD(apm_user_list); + +/* + * kapmd info. kapmd provides us a process context to handle + * "APM" events within - specifically necessary if we're going + * to be suspending the system. + */ +static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); +static DECLARE_COMPLETION(kapmd_exit); +static DEFINE_SPINLOCK(kapmd_queue_lock); +static struct apm_queue kapmd_queue; + +int apm_suspended; +EXPORT_SYMBOL(apm_suspended); + +/* Platform-specific apm_read_proc(). */ +int (*apm_get_info)(char *buf, char **start, off_t fpos, int length); +EXPORT_SYMBOL(apm_get_info); + +/* + * APM event queue management. + */ +static inline int queue_empty(struct apm_queue *q) +{ + return q->event_head == q->event_tail; +} + +static inline apm_event_t queue_get_event(struct apm_queue *q) +{ + q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; + return q->events[q->event_tail]; +} + +static void queue_add_event(struct apm_queue *q, apm_event_t event) +{ + q->event_head = (q->event_head + 1) % APM_MAX_EVENTS; + if (q->event_head == q->event_tail) { + static int notified; + + if (notified++ == 0) + printk(KERN_ERR "apm: an event queue overflowed\n"); + + q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; + } + q->events[q->event_head] = event; +} + +static void queue_event_one_user(struct apm_user *as, apm_event_t event) +{ + if (as->suser && as->writer) { + switch (event) { + case APM_SYS_SUSPEND: + case APM_USER_SUSPEND: + /* + * If this user already has a suspend pending, + * don't queue another one. + */ + if (as->suspend_state != SUSPEND_NONE) + return; + + as->suspend_state = SUSPEND_PENDING; + suspends_pending++; + break; + } + } + queue_add_event(&as->queue, event); +} + +static void queue_event(apm_event_t event, struct apm_user *sender) +{ + struct apm_user *as; + + down_read(&user_list_lock); + + list_for_each_entry(as, &apm_user_list, list) + if (as != sender && as->reader) + queue_event_one_user(as, event); + + up_read(&user_list_lock); + wake_up_interruptible(&apm_waitqueue); +} + +/** + * apm_queue_event - queue an APM event for kapmd + * @event: APM event + * + * Queue an APM event for kapmd to process and ultimately take the + * appropriate action. Only a subset of events are handled: + * %APM_LOW_BATTERY + * %APM_POWER_STATUS_CHANGE + * %APM_USER_SUSPEND + * %APM_SYS_SUSPEND + * %APM_CRITICAL_SUSPEND + */ +void apm_queue_event(apm_event_t event) +{ + spin_lock_irq(&kapmd_queue_lock); + queue_add_event(&kapmd_queue, event); + spin_unlock_irq(&kapmd_queue_lock); + + wake_up_interruptible(&kapmd_wait); +} +EXPORT_SYMBOL(apm_queue_event); + +static void apm_suspend(void) +{ + struct apm_user *as; + int err; + + apm_suspended = 1; + err = pm_suspend(PM_SUSPEND_MEM); + + /* + * Anyone on the APM queues will think we're still suspended. + * Send a message so everyone knows we're now awake again. + */ + queue_event(APM_NORMAL_RESUME, NULL); + + /* + * Finally, wake up anyone who is sleeping on the suspend. + */ + down_read(&user_list_lock); + list_for_each_entry(as, &apm_user_list, list) { + as->suspend_result = err; + as->suspend_state = SUSPEND_DONE; + } + up_read(&user_list_lock); + + wake_up(&apm_suspend_waitqueue); + apm_suspended = 0; +} + +static ssize_t apm_read(struct file *fp, char __user *buf, + size_t count, loff_t *ppos) +{ + struct apm_user *as = fp->private_data; + apm_event_t event; + int i = count, ret = 0; + + if (count < sizeof(apm_event_t)) + return -EINVAL; + + if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK) + return -EAGAIN; + + wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue)); + + while ((i >= sizeof(event)) && !queue_empty(&as->queue)) { + event = queue_get_event(&as->queue); + + ret = -EFAULT; + if (copy_to_user(buf, &event, sizeof(event))) + break; + + if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND) + as->suspend_state = SUSPEND_READ; + + buf += sizeof(event); + i -= sizeof(event); + } + + if (i < count) + ret = count - i; + + return ret; +} + +static unsigned int apm_poll(struct file *fp, poll_table * wait) +{ + struct apm_user *as = fp->private_data; + + poll_wait(fp, &apm_waitqueue, wait); + return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM; +} + +/* + * apm_ioctl - handle APM ioctl + * + * APM_IOC_SUSPEND + * This IOCTL is overloaded, and performs two functions. It is used to: + * - initiate a suspend + * - acknowledge a suspend read from /dev/apm_bios. + * Only when everyone who has opened /dev/apm_bios with write permission + * has acknowledge does the actual suspend happen. + */ +static int +apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) +{ + struct apm_user *as = filp->private_data; + unsigned long flags; + int err = -EINVAL; + + if (!as->suser || !as->writer) + return -EPERM; + + switch (cmd) { + case APM_IOC_SUSPEND: + as->suspend_result = -EINTR; + + if (as->suspend_state == SUSPEND_READ) { + /* + * If we read a suspend command from /dev/apm_bios, + * then the corresponding APM_IOC_SUSPEND ioctl is + * interpreted as an acknowledge. + */ + as->suspend_state = SUSPEND_ACKED; + suspends_pending--; + } else { + /* + * Otherwise it is a request to suspend the system. + * Queue an event for all readers, and expect an + * acknowledge from all writers who haven't already + * acknowledged. + */ + queue_event(APM_USER_SUSPEND, as); + } + + /* + * If there are no further acknowledges required, suspend + * the system. + */ + if (suspends_pending == 0) + apm_suspend(); + + /* + * Wait for the suspend/resume to complete. If there are + * pending acknowledges, we wait here for them. + * + * Note that we need to ensure that the PM subsystem does + * not kick us out of the wait when it suspends the threads. + */ + flags = current->flags; + current->flags |= PF_NOFREEZE; + + /* + * Note: do not allow a thread which is acking the suspend + * to escape until the resume is complete. + */ + if (as->suspend_state == SUSPEND_ACKED) + wait_event(apm_suspend_waitqueue, + as->suspend_state == SUSPEND_DONE); + else + wait_event_interruptible(apm_suspend_waitqueue, + as->suspend_state == SUSPEND_DONE); + + current->flags = flags; + err = as->suspend_result; + as->suspend_state = SUSPEND_NONE; + break; + } + + return err; +} + +static int apm_release(struct inode * inode, struct file * filp) +{ + struct apm_user *as = filp->private_data; + filp->private_data = NULL; + + down_write(&user_list_lock); + list_del(&as->list); + up_write(&user_list_lock); + + /* + * We are now unhooked from the chain. As far as new + * events are concerned, we no longer exist. However, we + * need to balance suspends_pending, which means the + * possibility of sleeping. + */ + if (as->suspend_state != SUSPEND_NONE) { + suspends_pending -= 1; + if (suspends_pending == 0) + apm_suspend(); + } + + kfree(as); + return 0; +} + +static int apm_open(struct inode * inode, struct file * filp) +{ + struct apm_user *as; + + as = kzalloc(sizeof(*as), GFP_KERNEL); + if (as) { + /* + * XXX - this is a tiny bit broken, when we consider BSD + * process accounting. If the device is opened by root, we + * instantly flag that we used superuser privs. Who knows, + * we might close the device immediately without doing a + * privileged operation -- cevans + */ + as->suser = capable(CAP_SYS_ADMIN); + as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; + as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; + + down_write(&user_list_lock); + list_add(&as->list, &apm_user_list); + up_write(&user_list_lock); + + filp->private_data = as; + } + + return as ? 0 : -ENOMEM; +} + +static struct file_operations apm_bios_fops = { + .owner = THIS_MODULE, + .read = apm_read, + .poll = apm_poll, + .ioctl = apm_ioctl, + .open = apm_open, + .release = apm_release, +}; + +static struct miscdevice apm_device = { + .minor = APM_MINOR_DEV, + .name = "apm_bios", + .fops = &apm_bios_fops +}; + + +#ifdef CONFIG_PROC_FS +/* + * Arguments, with symbols from linux/apm_bios.h. + * + * 0) Linux driver version (this will change if format changes) + * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. + * 2) APM flags from APM Installation Check (0x00): + * bit 0: APM_16_BIT_SUPPORT + * bit 1: APM_32_BIT_SUPPORT + * bit 2: APM_IDLE_SLOWS_CLOCK + * bit 3: APM_BIOS_DISABLED + * bit 4: APM_BIOS_DISENGAGED + * 3) AC line status + * 0x00: Off-line + * 0x01: On-line + * 0x02: On backup power (BIOS >= 1.1 only) + * 0xff: Unknown + * 4) Battery status + * 0x00: High + * 0x01: Low + * 0x02: Critical + * 0x03: Charging + * 0x04: Selected battery not present (BIOS >= 1.2 only) + * 0xff: Unknown + * 5) Battery flag + * bit 0: High + * bit 1: Low + * bit 2: Critical + * bit 3: Charging + * bit 7: No system battery + * 0xff: Unknown + * 6) Remaining battery life (percentage of charge): + * 0-100: valid + * -1: Unknown + * 7) Remaining battery life (time units): + * Number of remaining minutes or seconds + * -1: Unknown + * 8) min = minutes; sec = seconds + */ +static int apm_read_proc(char *buf, char **start, off_t fpos, int length) +{ + if (likely(apm_get_info)) + return apm_get_info(buf, start, fpos, length); + + return -EINVAL; +} +#endif + +static int kapmd(void *arg) +{ + daemonize("kapmd"); + current->flags |= PF_NOFREEZE; + + do { + apm_event_t event; + + wait_event_interruptible(kapmd_wait, + !queue_empty(&kapmd_queue) || !pm_active); + + if (!pm_active) + break; + + spin_lock_irq(&kapmd_queue_lock); + event = 0; + if (!queue_empty(&kapmd_queue)) + event = queue_get_event(&kapmd_queue); + spin_unlock_irq(&kapmd_queue_lock); + + switch (event) { + case 0: + break; + + case APM_LOW_BATTERY: + case APM_POWER_STATUS_CHANGE: + queue_event(event, NULL); + break; + + case APM_USER_SUSPEND: + case APM_SYS_SUSPEND: + queue_event(event, NULL); + if (suspends_pending == 0) + apm_suspend(); + break; + + case APM_CRITICAL_SUSPEND: + apm_suspend(); + break; + } + } while (1); + + complete_and_exit(&kapmd_exit, 0); +} + +static int __init apm_init(void) +{ + int ret; + + pm_active = 1; + + ret = kernel_thread(kapmd, NULL, CLONE_KERNEL); + if (unlikely(ret < 0)) { + pm_active = 0; + return ret; + } + + create_proc_info_entry("apm", 0, NULL, apm_read_proc); + + ret = misc_register(&apm_device); + if (unlikely(ret != 0)) { + remove_proc_entry("apm", NULL); + + pm_active = 0; + wake_up(&kapmd_wait); + wait_for_completion(&kapmd_exit); + } + + return ret; +} + +static void __exit apm_exit(void) +{ + misc_deregister(&apm_device); + remove_proc_entry("apm", NULL); + + pm_active = 0; + wake_up(&kapmd_wait); + wait_for_completion(&kapmd_exit); +} + +module_init(apm_init); +module_exit(apm_exit); + +MODULE_AUTHOR("Stephen Rothwell, Andriy Skulysh"); +MODULE_DESCRIPTION("Advanced Power Management"); +MODULE_LICENSE("GPL"); diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index f1f9ab87f0b..3e5fa1e24df 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -10,7 +10,8 @@ */ #include <linux/init.h> - +#include <linux/mm.h> +#include <linux/vmalloc.h> #include <asm/io.h> #include <asm/irq.h> @@ -32,8 +33,6 @@ /* SH4 can't access PCMCIA interface through P2 area. * we must remap it with appropreate attribute bit of the page set. * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */ -#include <linux/mm.h> -#include <linux/vmalloc.h> #if defined(CONFIG_CF_AREA6) #define slot_no 0 @@ -41,9 +40,6 @@ #define slot_no 1 #endif -/* defined in mm/ioremap.c */ -extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); - /* use this pointer to access to directly connected compact flash io area*/ void *cf_io_base; @@ -62,7 +58,7 @@ static int __init allocate_cf_area(void) return -ENOMEM; } /* printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n", - paddrbase, psize, prot.pgprot, cf_io_base);*/ + paddrbase, psize, prot.pgprot, cf_io_base);*/ /* XXX : do we need attribute and common-memory area also? */ @@ -87,7 +83,7 @@ static int __init cf_init_default(void) } #if defined(CONFIG_SH_SOLUTION_ENGINE) -#include <asm/se/se.h> +#include <asm/se.h> /* * SolutionEngine diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index 59d5b748752..fb5dac06938 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -8,6 +8,5 @@ obj-$(CONFIG_CPU_SH2) += sh2/ obj-$(CONFIG_CPU_SH3) += sh3/ obj-$(CONFIG_CPU_SH4) += sh4/ -obj-$(CONFIG_SH_RTC) += rtc.o obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 97fa37f42b8..51ec64cdf34 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -1,7 +1,7 @@ /* * arch/sh/kernel/cpu/clock.c - SuperH clock framework * - * Copyright (C) 2005 Paul Mundt + * Copyright (C) 2005, 2006 Paul Mundt * * This clock framework is derived from the OMAP version by: * @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/list.h> #include <linux/kref.h> #include <linux/seq_file.h> @@ -24,7 +25,7 @@ static LIST_HEAD(clock_list); static DEFINE_SPINLOCK(clock_lock); -static DECLARE_MUTEX(clock_list_sem); +static DEFINE_MUTEX(clock_list_sem); /* * Each subtype is expected to define the init routines for these clocks, @@ -140,21 +141,21 @@ void clk_disable(struct clk *clk) int clk_register(struct clk *clk) { - down(&clock_list_sem); + mutex_lock(&clock_list_sem); list_add(&clk->node, &clock_list); kref_init(&clk->kref); - up(&clock_list_sem); + mutex_unlock(&clock_list_sem); return 0; } void clk_unregister(struct clk *clk) { - down(&clock_list_sem); + mutex_lock(&clock_list_sem); list_del(&clk->node); - up(&clock_list_sem); + mutex_unlock(&clock_list_sem); } inline unsigned long clk_get_rate(struct clk *clk) @@ -198,14 +199,14 @@ struct clk *clk_get(const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clock_list_sem); + mutex_lock(&clock_list_sem); list_for_each_entry(p, &clock_list, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clock_list_sem); + mutex_unlock(&clock_list_sem); return clk; } @@ -225,7 +226,7 @@ int __init clk_init(void) { int i, ret = 0; - BUG_ON(unlikely(!master_clk.rate)); + BUG_ON(!master_clk.rate); for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) { struct clk *clk = onchip_clocks[i]; diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 868e68b2888..bfb90eb0b7a 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -4,6 +4,7 @@ * CPU init code * * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -13,6 +14,7 @@ #include <linux/kernel.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/page.h> #include <asm/system.h> #include <asm/cacheflush.h> #include <asm/cache.h> @@ -51,7 +53,15 @@ static void __init cache_init(void) ccr = ctrl_inl(CCR); /* - * If the cache is already enabled .. flush it. + * At this point we don't know whether the cache is enabled or not - a + * bootloader may have enabled it. There are at least 2 things that + * could be dirty in the cache at this point: + * 1. kernel command line set up by boot loader + * 2. spilled registers from the prolog of this function + * => before re-initialising the cache, we must do a purge of the whole + * cache out to memory for safety. As long as nothing is spilled + * during the loop to lines that have already been done, this is safe. + * - RPC */ if (ccr & CCR_CACHE_ENABLE) { unsigned long ways, waysize, addrstart; @@ -98,6 +108,8 @@ static void __init cache_init(void) /* Force EMODE if possible */ if (cpu_data->dcache.ways > 1) flags |= CCR_CACHE_EMODE; + else + flags &= ~CCR_CACHE_EMODE; #endif #ifdef CONFIG_SH_WRITETHROUGH @@ -112,6 +124,9 @@ static void __init cache_init(void) /* Turn on OCRAM -- halve the OC */ flags |= CCR_CACHE_ORA; cpu_data->dcache.sets >>= 1; + + cpu_data->dcache.way_size = cpu_data->dcache.sets * + cpu_data->dcache.linesz; #endif ctrl_outl(flags, CCR); @@ -184,6 +199,10 @@ asmlinkage void __init sh_cpu_init(void) /* Init the cache */ cache_init(); + shm_align_mask = max_t(unsigned long, + cpu_data->dcache.way_size - 1, + PAGE_SIZE - 1); + /* Disable the FPU */ if (fpu_disabled) { printk("FPU Disabled\n"); diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index e3cccea15e1..1c034c283f5 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -3,5 +3,6 @@ # obj-y += ipr.o imask.o -obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o -obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o +obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o +obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o +obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index 30064bf6e15..e30e4b7aa70 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -241,9 +241,9 @@ static struct intc2_init { /* 110-111 reserved/unused */ #elif defined(CONFIG_CPU_SUBTYPE_SH7780) { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2}, -#ifdef CONFIG_SH_RTC - { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, -#endif + { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 0f545941fb4..f785822cd5d 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -57,31 +57,27 @@ static struct hw_interrupt_type ipr_irq_type = { static void disable_ipr_irq(unsigned int irq) { - unsigned long val, flags; + unsigned long val; unsigned int addr = ipr_data[irq].addr; unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift); /* Set the priority in IPR to 0 */ - local_irq_save(flags); val = ctrl_inw(addr); val &= mask; ctrl_outw(val, addr); - local_irq_restore(flags); } static void enable_ipr_irq(unsigned int irq) { - unsigned long val, flags; + unsigned long val; unsigned int addr = ipr_data[irq].addr; int priority = ipr_data[irq].priority; unsigned short value = (priority << ipr_data[irq].shift); /* Set priority in IPR back to original value */ - local_irq_save(flags); val = ctrl_inw(addr); val |= value; ctrl_outw(val, addr); - local_irq_restore(flags); } static void mask_and_ack_ipr(unsigned int irq) @@ -89,6 +85,7 @@ static void mask_and_ack_ipr(unsigned int irq) disable_ipr_irq(irq); #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is needed when we use edge triggered setting */ /* XXX: Is it really needed? */ @@ -123,7 +120,7 @@ void __init init_IRQ(void) #ifndef CONFIG_CPU_SUBTYPE_SH7780 make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); -#if defined(CONFIG_SH_RTC) +#ifdef RTC_IRQ make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); #endif @@ -162,6 +159,7 @@ void __init init_IRQ(void) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) /* * Initialize the Interrupt Controller (INTC) @@ -192,6 +190,8 @@ void __init init_IRQ(void) /* Perform the machine specific initialisation */ if (sh_mv.mv_init_irq != NULL) sh_mv.mv_init_irq(); + + irq_ctx_init(smp_processor_id()); } #if !defined(CONFIG_CPU_HAS_PINT_IRQ) diff --git a/arch/sh/boards/adx/irq_maskreg.c b/arch/sh/kernel/cpu/irq/maskreg.c index 4b2abe5eb16..492db31b3ca 100644 --- a/arch/sh/boards/adx/irq_maskreg.c +++ b/arch/sh/kernel/cpu/irq/maskreg.c @@ -1,30 +1,23 @@ /* - * linux/arch/sh/kernel/irq_maskreg.c + * Interrupt handling for Simple external interrupt mask register * * Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp> * - * This file may be copied or modified under the terms of the GNU - * General Public License. See linux/COPYING for more information. - * - * Interrupt handling for Simple external interrupt mask register - * * This is for the machine which have single 16 bit register * for masking external IRQ individually. - * Each bit of the register is for masking each interrupt. + * Each bit of the register is for masking each interrupt. + * + * This file may be copied or modified under the terms of the GNU + * General Public License. See linux/COPYING for more information. */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/system.h> #include <asm/io.h> -#include <asm/machvec.h> -/* address of external interrupt mask register - * address must be set prior to use these (maybe in init_XXX_irq()) - * XXX : is it better to use .config than specifying it in code? */ -unsigned short *irq_mask_register = 0; +/* address of external interrupt mask register */ +unsigned long irq_mask_register; /* forward declaration */ static unsigned int startup_maskreg_irq(unsigned int irq); @@ -36,7 +29,7 @@ static void end_maskreg_irq(unsigned int irq); /* hw_interrupt_type */ static struct hw_interrupt_type maskreg_irq_type = { - .typename = " Mask Register", + .typename = "Mask Register", .startup = startup_maskreg_irq, .shutdown = shutdown_maskreg_irq, .enable = enable_maskreg_irq, @@ -47,7 +40,7 @@ static struct hw_interrupt_type maskreg_irq_type = { /* actual implementatin */ static unsigned int startup_maskreg_irq(unsigned int irq) -{ +{ enable_maskreg_irq(irq); return 0; /* never anything pending */ } @@ -59,32 +52,26 @@ static void shutdown_maskreg_irq(unsigned int irq) static void disable_maskreg_irq(unsigned int irq) { - if (irq_mask_register) { - unsigned long flags; - unsigned short val, mask = 0x01 << irq; + unsigned short val, mask = 0x01 << irq; + + BUG_ON(!irq_mask_register); - /* Set "irq"th bit */ - local_irq_save(flags); - val = ctrl_inw((unsigned long)irq_mask_register); - val |= mask; - ctrl_outw(val, (unsigned long)irq_mask_register); - local_irq_restore(flags); - } + /* Set "irq"th bit */ + val = ctrl_inw(irq_mask_register); + val |= mask; + ctrl_outw(val, irq_mask_register); } static void enable_maskreg_irq(unsigned int irq) { - if (irq_mask_register) { - unsigned long flags; - unsigned short val, mask = ~(0x01 << irq); + unsigned short val, mask = ~(0x01 << irq); + + BUG_ON(!irq_mask_register); - /* Clear "irq"th bit */ - local_irq_save(flags); - val = ctrl_inw((unsigned long)irq_mask_register); - val &= mask; - ctrl_outw(val, (unsigned long)irq_mask_register); - local_irq_restore(flags); - } + /* Clear "irq"th bit */ + val = ctrl_inw(irq_mask_register); + val &= mask; + ctrl_outw(val, irq_mask_register); } static void mask_and_ack_maskreg(unsigned int irq) @@ -101,6 +88,6 @@ static void end_maskreg_irq(unsigned int irq) void make_maskreg_irq(unsigned int irq) { disable_irq_nosync(irq); - irq_desc[irq].chip = &maskreg_irq_type; + irq_desc[irq].handler = &maskreg_irq_type; disable_maskreg_irq(irq); } diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c index 80cd8108d36..17f47b373d6 100644 --- a/arch/sh/kernel/cpu/irq/pint.c +++ b/arch/sh/kernel/cpu/irq/pint.c @@ -48,26 +48,22 @@ static struct hw_interrupt_type pint_irq_type = { static void disable_pint_irq(unsigned int irq) { - unsigned long val, flags; + unsigned long val; - local_irq_save(flags); val = ctrl_inw(INTC_INTER); val &= ~(1 << (irq - PINT_IRQ_BASE)); ctrl_outw(val, INTC_INTER); /* disable PINTn */ portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2); - local_irq_restore(flags); } static void enable_pint_irq(unsigned int irq) { - unsigned long val, flags; + unsigned long val; - local_irq_save(flags); val = ctrl_inw(INTC_INTER); val |= 1 << (irq - PINT_IRQ_BASE); ctrl_outw(val, INTC_INTER); /* enable PINTn */ portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2; - local_irq_restore(flags); } static void mask_and_ack_pint(unsigned int irq) diff --git a/arch/sh/kernel/cpu/rtc.c b/arch/sh/kernel/cpu/rtc.c deleted file mode 100644 index 4304cf75cfa..00000000000 --- a/arch/sh/kernel/cpu/rtc.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/bcd.h> -#include <asm/io.h> -#include <asm/rtc.h> - -void sh_rtc_gettimeofday(struct timespec *ts) -{ - unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit; - unsigned long flags; - - again: - do { - local_irq_save(flags); - ctrl_outb(0, RCR1); /* Clear CF-bit */ - sec128 = ctrl_inb(R64CNT); - sec = ctrl_inb(RSECCNT); - min = ctrl_inb(RMINCNT); - hr = ctrl_inb(RHRCNT); - wk = ctrl_inb(RWKCNT); - day = ctrl_inb(RDAYCNT); - mon = ctrl_inb(RMONCNT); -#if defined(CONFIG_CPU_SH4) - yr = ctrl_inw(RYRCNT); - yr100 = (yr >> 8); - yr &= 0xff; -#else - yr = ctrl_inb(RYRCNT); - yr100 = (yr == 0x99) ? 0x19 : 0x20; -#endif - sec2 = ctrl_inb(R64CNT); - cf_bit = ctrl_inb(RCR1) & RCR1_CF; - local_irq_restore(flags); - } while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0); - - BCD_TO_BIN(yr100); - BCD_TO_BIN(yr); - BCD_TO_BIN(mon); - BCD_TO_BIN(day); - BCD_TO_BIN(hr); - BCD_TO_BIN(min); - BCD_TO_BIN(sec); - - if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 || - hr > 23 || min > 59 || sec > 59) { - printk(KERN_ERR - "SH RTC: invalid value, resetting to 1 Jan 2000\n"); - local_irq_save(flags); - ctrl_outb(RCR2_RESET, RCR2); /* Reset & Stop */ - ctrl_outb(0, RSECCNT); - ctrl_outb(0, RMINCNT); - ctrl_outb(0, RHRCNT); - ctrl_outb(6, RWKCNT); - ctrl_outb(1, RDAYCNT); - ctrl_outb(1, RMONCNT); -#if defined(CONFIG_CPU_SH4) - ctrl_outw(0x2000, RYRCNT); -#else - ctrl_outb(0, RYRCNT); -#endif - ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start */ - goto again; - } - -#if RTC_BIT_INVERTED != 0 - if ((sec128 & RTC_BIT_INVERTED)) - sec--; -#endif - - ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec); - ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000; -} - -/* - * Changed to only care about tv_sec, and not the full timespec struct - * (i.e. tv_nsec). It can easily be switched to timespec for future cpus - * that support setting usec or nsec RTC values. - */ -int sh_rtc_settimeofday(const time_t secs) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned long flags; - - local_irq_save(flags); - ctrl_outb(RCR2_RESET, RCR2); /* Reset pre-scaler & stop RTC */ - - cmos_minutes = ctrl_inb(RMINCNT); - BCD_TO_BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = secs % 60; - real_minutes = secs / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - ctrl_outb(real_seconds, RSECCNT); - ctrl_outb(real_minutes, RMINCNT); - } else { - printk(KERN_WARNING - "set_rtc_time: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start RTC */ - local_irq_restore(flags); - - return retval; -} diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index b54dbb9a0c8..58d3815695f 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -4,10 +4,21 @@ obj-y := ex.o probe.o +# CPU subtype setup +obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o +obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o +obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o +obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o +obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o +obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o +obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o + +# Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o +clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o +clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7300.o obj-y += $(clock-y) - diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c new file mode 100644 index 00000000000..0cf96f9833b --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c @@ -0,0 +1,84 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7706.c + * + * SH7706 support for the clock framework + * + * Copyright (C) 2006 Takashi YOSHII + * + * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c + * Copyright (C) 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 }; +static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 }; +static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003); + + clk->rate *= pfc_divisors[idx]; +} + +static struct clk_ops sh7706_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003); + + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7706_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4); + + clk->rate = clk->parent->rate / stc_multipliers[idx]; +} + +static struct clk_ops sh7706_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2); + + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7706_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7706_clk_ops[] = { + &sh7706_master_clk_ops, + &sh7706_module_clk_ops, + &sh7706_bus_clk_ops, + &sh7706_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7706_clk_ops)) + *ops = sh7706_clk_ops[idx]; +} diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index cc04e9e239f..44daf44833f 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -84,8 +84,12 @@ ENTRY(interrupt_table) .long do_IRQ ! rovi .long do_IRQ .long do_IRQ /* 5E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || \ + defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) .long do_IRQ ! 32 IRQ irq0 /* 600 */ .long do_IRQ ! 33 irq1 .long do_IRQ ! 34 irq2 @@ -147,6 +151,51 @@ ENTRY(interrupt_table) .long do_IRQ ! 62 PCC pcc0i .long do_IRQ ! 63 pcc1i /* 9E0 */ #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7710) + .long exception_none ! 61 /* 9A0 */ + .long exception_none ! 62 + .long exception_none ! 63 + .long exception_none ! 64 /* A00 */ + .long exception_none ! 65 + .long exception_none ! 66 + .long exception_none ! 67 + .long exception_none ! 68 + .long exception_none ! 69 + .long exception_none ! 70 + .long exception_none ! 71 + .long exception_none ! 72 /* B00 */ + .long exception_none ! 73 + .long exception_none ! 74 + .long exception_none ! 75 + .long do_IRQ ! 76 DMAC2 dei4 /* B80 */ + .long do_IRQ ! 77 DMAC2 dei5 + .long exception_none ! 78 + .long do_IRQ ! 79 IPSEC ipseci /* BE0 */ + .long do_IRQ ! 80 EDMAC eint0 /* C00 */ + .long do_IRQ ! 81 EDMAC eint1 + .long do_IRQ ! 82 EDMAC eint2 + .long exception_none ! 83 /* C60 */ + .long exception_none ! 84 + .long exception_none ! 85 + .long exception_none ! 86 + .long exception_none ! 87 + .long exception_none ! 88 /* D00 */ + .long exception_none ! 89 + .long exception_none ! 90 + .long exception_none ! 91 + .long exception_none ! 92 + .long exception_none ! 93 + .long exception_none ! 94 + .long exception_none ! 95 + .long do_IRQ ! 96 SIOF eri0 /* E00 */ + .long do_IRQ ! 97 txi0 + .long do_IRQ ! 98 rxi0 + .long do_IRQ ! 99 cci0 + .long do_IRQ ! 100 eri1 /* E80 */ + .long do_IRQ ! 101 txi1 + .long do_IRQ ! 102 rxi2 + .long do_IRQ ! 103 cci3 +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) .long do_IRQ ! 64 .long do_IRQ ! 65 @@ -195,4 +244,3 @@ ENTRY(interrupt_table) .long do_IRQ ! 108 #endif #endif - diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index 5cdc8863860..e6709883629 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -72,6 +72,12 @@ int __init detect_cpu_and_cache_system(void) cpu_data->dcache.sets = 256; cpu_data->type = CPU_SH7729; +#if defined(CONFIG_CPU_SUBTYPE_SH7706) + cpu_data->type = CPU_SH7706; +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7710) + cpu_data->type = CPU_SH7710; +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) cpu_data->type = CPU_SH7705; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7300.c b/arch/sh/kernel/cpu/sh3/setup-sh7300.c new file mode 100644 index 00000000000..ab4d204bfba --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7300.c @@ -0,0 +1,43 @@ +/* + * SH7300 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xa4430000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 80, 80, 80, 80 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7300_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7300_devices_setup(void) +{ + return platform_add_devices(sh7300_devices, + ARRAY_SIZE(sh7300_devices)); +} +__initcall(sh7300_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c new file mode 100644 index 00000000000..a8e41c5241f --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -0,0 +1,48 @@ +/* + * SH7705 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xa4400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, + }, { + .mapbase = 0xa4410000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 57, 59, 58 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7705_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7705_devices_setup(void) +{ + return platform_add_devices(sh7705_devices, + ARRAY_SIZE(sh7705_devices)); +} +__initcall(sh7705_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7708.c b/arch/sh/kernel/cpu/sh3/setup-sh7708.c new file mode 100644 index 00000000000..f933723911c --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7708.c @@ -0,0 +1,43 @@ +/* + * SH7708 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffffe80, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 24, 25, 0 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7708_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7708_devices_setup(void) +{ + return platform_add_devices(sh7708_devices, + ARRAY_SIZE(sh7708_devices)); +} +__initcall(sh7708_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c new file mode 100644 index 00000000000..ff43ef2a1f0 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -0,0 +1,53 @@ +/* + * SH7707/SH7709 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffffe80, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 24, 25, 0 }, + }, { + .mapbase = 0xa4000150, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 57, 59, 58 }, + }, { + .mapbase = 0xa4000140, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_IRDA, + .irqs = { 52, 53, 55, 54 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7709_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7709_devices_setup(void) +{ + return platform_add_devices(sh7709_devices, + ARRAY_SIZE(sh7709_devices)); +} +__initcall(sh7709_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c new file mode 100644 index 00000000000..895f99ee6a9 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -0,0 +1,43 @@ +/* + * SH7710 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xa4400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7710_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7710_devices_setup(void) +{ + return platform_add_devices(sh7710_devices, + ARRAY_SIZE(sh7710_devices)); +} +__initcall(sh7710_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 3d5cafc71ae..8dbf3895ece 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -7,6 +7,16 @@ obj-y := ex.o probe.o obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o +# CPU subtype setup +obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o +obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o +obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o +obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o +obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o +obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o +obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o + # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH4) := clock-sh4.o clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S index 26a27df0650..7146893a6cc 100644 --- a/arch/sh/kernel/cpu/sh4/ex.S +++ b/arch/sh/kernel/cpu/sh4/ex.S @@ -72,6 +72,7 @@ ENTRY(interrupt_table) .long do_IRQ ! 1110 .long exception_error ! Internal hardware +#ifndef CONFIG_CPU_SUBTYPE_SH7780 .long do_IRQ ! TMU0 tuni0 /* 400 */ .long do_IRQ ! TMU1 tuni1 .long do_IRQ ! TMU2 tuni2 @@ -122,6 +123,13 @@ ENTRY(interrupt_table) .long do_IRQ ! 45 dmte5 .long do_IRQ ! 46 dmte6 .long do_IRQ ! 47 dmte7 /* 7E0 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7343) + .long do_IRQ ! 44 IIC1 ali /* 780 */ + .long do_IRQ ! 45 tacki + .long do_IRQ ! 46 waiti + .long do_IRQ ! 47 dtei /* 7E0 */ + .long do_IRQ ! 48 DMAC dei0 /* 800 */ + .long do_IRQ ! 49 dei1 /* 820 */ #else .long exception_error ! 44 /* 780 */ .long exception_error ! 45 @@ -131,7 +139,8 @@ ENTRY(interrupt_table) #if defined(CONFIG_SH_FPU) .long do_fpu_state_restore ! 48 /* 800 */ .long do_fpu_state_restore ! 49 /* 820 */ -#else +#elif !defined(CONFIG_CPU_SUBTYPE_SH7343) && \ + !defined(CONFIG_CPU_SUBTYPE_SH73180) .long exception_error .long exception_error #endif @@ -224,7 +233,7 @@ ENTRY(interrupt_table) .long exception_error .long do_IRQ ! ADC adi .long do_IRQ ! CMT cmti /* FA0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH73180) +#elif defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7343) .long do_IRQ ! 50 0x840 .long do_IRQ ! 51 0x860 .long do_IRQ ! 52 0x880 @@ -379,5 +388,168 @@ ENTRY(interrupt_table) .long exception_error ! 141 0x13a0 .long exception_error ! 142 0x13c0 .long exception_error ! 143 0x13e0 +#elif defined(CONFIG_CPU_SUBTYPE_SH7770) + .long do_IRQ ! 50 0x840 + .long do_IRQ ! 51 0x860 + .long do_IRQ ! 52 0x880 + .long do_IRQ ! 53 0x8a0 + .long do_IRQ ! 54 0x8c0 + .long do_IRQ ! 55 0x8e0 + .long do_IRQ ! 56 0x900 + .long do_IRQ ! 57 0x920 + .long do_IRQ ! 58 0x940 + .long do_IRQ ! 59 0x960 + .long do_IRQ ! 60 0x980 + .long do_IRQ ! 61 0x9a0 + .long do_IRQ ! 62 0x9c0 + .long do_IRQ ! 63 0x9e0 + .long do_IRQ ! 64 0xa00 + .long do_IRQ ! 65 0xa20 + .long do_IRQ ! 66 0xa4d + .long do_IRQ ! 67 0xa60 + .long do_IRQ ! 68 0xa80 + .long do_IRQ ! 69 0xaa0 + .long do_IRQ ! 70 0xac0 + .long do_IRQ ! 71 0xae0 + .long do_IRQ ! 72 0xb00 + .long do_IRQ ! 73 0xb20 + .long do_IRQ ! 74 0xb40 + .long do_IRQ ! 75 0xb60 + .long do_IRQ ! 76 0xb80 + .long do_IRQ ! 77 0xba0 + .long do_IRQ ! 78 0xbc0 + .long do_IRQ ! 79 0xbe0 + .long do_IRQ ! 80 0xc00 + .long do_IRQ ! 81 0xc20 + .long do_IRQ ! 82 0xc40 + .long do_IRQ ! 83 0xc60 + .long do_IRQ ! 84 0xc80 + .long do_IRQ ! 85 0xca0 + .long do_IRQ ! 86 0xcc0 + .long do_IRQ ! 87 0xce0 + .long do_IRQ ! 88 0xd00 + .long do_IRQ ! 89 0xd20 + .long do_IRQ ! 90 0xd40 + .long do_IRQ ! 91 0xd60 + .long do_IRQ ! 92 0xd80 + .long do_IRQ ! 93 0xda0 + .long do_IRQ ! 94 0xdc0 + .long do_IRQ ! 95 0xde0 + .long do_IRQ ! 96 0xe00 + .long do_IRQ ! 97 0xe20 + .long do_IRQ ! 98 0xe40 + .long do_IRQ ! 99 0xe60 + .long do_IRQ ! 100 0xe80 + .long do_IRQ ! 101 0xea0 + .long do_IRQ ! 102 0xec0 + .long do_IRQ ! 103 0xee0 + .long do_IRQ ! 104 0xf00 + .long do_IRQ ! 105 0xf20 + .long do_IRQ ! 106 0xf40 + .long do_IRQ ! 107 0xf60 + .long do_IRQ ! 108 0xf80 +#endif +#else + .long exception_error /* 400 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! RTC ati + .long do_IRQ ! pri + .long do_IRQ ! cui + .long exception_error + .long exception_error /* 500 */ + .long exception_error + .long exception_error + .long do_IRQ ! WDT iti /* 560 */ + .long do_IRQ ! TMU-ch0 + .long do_IRQ ! TMU-ch1 + .long do_IRQ ! TMU-ch2 + .long do_IRQ ! ticpi2 /* 5E0 */ + .long do_IRQ ! 32 Hitachi UDI /* 600 */ + .long exception_error + .long do_IRQ ! 34 DMAC dmte0 + .long do_IRQ ! 35 dmte1 + .long do_IRQ ! 36 dmte2 + .long do_IRQ ! 37 dmte3 + .long do_IRQ ! 38 dmae + .long exception_error ! 39 /* 6E0 */ + .long do_IRQ ! 40 SCIF-ch0 eri /* 700 */ + .long do_IRQ ! 41 rxi + .long do_IRQ ! 42 bri + .long do_IRQ ! 43 txi + .long do_IRQ ! 44 DMAC dmte4 /* 780 */ + .long do_IRQ ! 45 dmte5 + .long do_IRQ ! 46 dmte6 + .long do_IRQ ! 47 dmte7 /* 7E0 */ +#if defined(CONFIG_SH_FPU) + .long do_fpu_state_restore ! 48 /* 800 */ + .long do_fpu_state_restore ! 49 /* 820 */ +#else + .long exception_error + .long exception_error +#endif + .long exception_error /* 840 */ + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! 56 CMT /* 900 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! 60 HAC + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! PCI serr /* A00 */ + .long do_IRQ ! INTA + .long do_IRQ ! INTB + .long do_IRQ ! INTC + .long do_IRQ ! INTD + .long do_IRQ ! err + .long do_IRQ ! pwd3 + .long do_IRQ ! pwd2 + .long do_IRQ ! pwd1 /* B00 */ + .long do_IRQ ! pwd0 + .long exception_error + .long exception_error + .long do_IRQ ! SCIF-ch1 eri /* B80 */ + .long do_IRQ ! rxi + .long do_IRQ ! bri + .long do_IRQ ! txi + .long do_IRQ ! SIOF /* C00 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! HSPI /* C80 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! MMCIF fatat /* D00 */ + .long do_IRQ ! tran + .long do_IRQ ! err + .long do_IRQ ! frdy + .long do_IRQ ! DMAC dmint8 /* D80 */ + .long do_IRQ ! dmint9 + .long do_IRQ ! dmint10 + .long do_IRQ ! dmint11 + .long do_IRQ ! TMU-ch3 /* E00 */ + .long do_IRQ ! TMU-ch4 + .long do_IRQ ! TMU-ch5 + .long exception_error + .long do_IRQ ! SSI + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! FLCTL flste /* F00 */ + .long do_IRQ ! fltend + .long do_IRQ ! fltrq0 + .long do_IRQ ! fltrq1 + .long do_IRQ ! GPIO gpioi0 /* F80 */ + .long do_IRQ ! gpioi1 + .long do_IRQ ! gpioi2 + .long do_IRQ ! gpioi3 #endif diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 42427b79697..c294de1e14a 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -3,7 +3,7 @@ * * CPU Subtype Probing for SH-4. * - * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2001 - 2006 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -29,7 +29,7 @@ int __init detect_cpu_and_cache_system(void) [9] = (1 << 16) }; - pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffff; + pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffffff; prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff; cvr = (ctrl_inl(CCN_CVR)); @@ -38,7 +38,6 @@ int __init detect_cpu_and_cache_system(void) */ cpu_data->icache.way_incr = (1 << 13); cpu_data->icache.entry_shift = 5; - cpu_data->icache.entry_mask = 0x1fe0; cpu_data->icache.sets = 256; cpu_data->icache.ways = 1; cpu_data->icache.linesz = L1_CACHE_BYTES; @@ -48,13 +47,29 @@ int __init detect_cpu_and_cache_system(void) */ cpu_data->dcache.way_incr = (1 << 14); cpu_data->dcache.entry_shift = 5; - cpu_data->dcache.entry_mask = 0x3fe0; cpu_data->dcache.sets = 512; cpu_data->dcache.ways = 1; cpu_data->dcache.linesz = L1_CACHE_BYTES; - /* Set the FPU flag, virtually all SH-4's have one */ - cpu_data->flags |= CPU_HAS_FPU; + /* + * Setup some generic flags we can probe + * (L2 and DSP detection only work on SH-4A) + */ + if (((pvr >> 16) & 0xff) == 0x10) { + if ((cvr & 0x02000000) == 0) + cpu_data->flags |= CPU_HAS_L2_CACHE; + if ((cvr & 0x10000000) == 0) + cpu_data->flags |= CPU_HAS_DSP; + + cpu_data->flags |= CPU_HAS_LLSC; + } + + /* FPU detection works for everyone */ + if ((cvr & 0x20000000) == 1) + cpu_data->flags |= CPU_HAS_FPU; + + /* Mask off the upper chip ID */ + pvr &= 0xffff; /* * Probe the underlying processor version/revision and @@ -63,56 +78,101 @@ int __init detect_cpu_and_cache_system(void) switch (pvr) { case 0x205: cpu_data->type = CPU_SH7750; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER; + cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA; break; case 0x206: cpu_data->type = CPU_SH7750S; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER; + cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA; break; case 0x1100: cpu_data->type = CPU_SH7751; + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; break; case 0x2000: cpu_data->type = CPU_SH73180; cpu_data->icache.ways = 4; cpu_data->dcache.ways = 4; - cpu_data->flags &= ~CPU_HAS_FPU; + cpu_data->flags |= CPU_HAS_LLSC; + break; + case 0x2001: + case 0x2004: + cpu_data->type = CPU_SH7770; + cpu_data->icache.ways = 4; + cpu_data->dcache.ways = 4; + + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_LLSC; + break; + case 0x2006: + case 0x200A: + if (prr == 0x61) + cpu_data->type = CPU_SH7781; + else + cpu_data->type = CPU_SH7780; + + cpu_data->icache.ways = 4; + cpu_data->dcache.ways = 4; + + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC; + break; + case 0x3000: + case 0x3003: + cpu_data->type = CPU_SH7343; + cpu_data->icache.ways = 4; + cpu_data->dcache.ways = 4; + cpu_data->flags |= CPU_HAS_LLSC; break; case 0x8000: cpu_data->type = CPU_ST40RA; + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; break; case 0x8100: cpu_data->type = CPU_ST40GX1; + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; break; case 0x700: cpu_data->type = CPU_SH4_501; cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - - /* No FPU on the SH4-500 series.. */ - cpu_data->flags &= ~CPU_HAS_FPU; + cpu_data->flags |= CPU_HAS_PTEA; break; case 0x600: cpu_data->type = CPU_SH4_202; cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; break; case 0x500 ... 0x501: switch (prr) { - case 0x10: cpu_data->type = CPU_SH7750R; break; - case 0x11: cpu_data->type = CPU_SH7751R; break; - case 0x50: cpu_data->type = CPU_SH7760; break; + case 0x10: + cpu_data->type = CPU_SH7750R; + break; + case 0x11: + cpu_data->type = CPU_SH7751R; + break; + case 0x50 ... 0x5f: + cpu_data->type = CPU_SH7760; + break; } cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; + cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + break; default: cpu_data->type = CPU_SH_NONE; break; } +#ifdef CONFIG_SH_DIRECT_MAPPED + cpu_data->icache.ways = 1; + cpu_data->dcache.ways = 1; +#endif + /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. @@ -121,18 +181,56 @@ int __init detect_cpu_and_cache_system(void) size = sizes[(cvr >> 20) & 0xf]; cpu_data->icache.way_incr = (size >> 1); cpu_data->icache.sets = (size >> 6); - cpu_data->icache.entry_mask = - (cpu_data->icache.way_incr - (1 << 5)); + } + /* Setup the rest of the I-cache info */ + cpu_data->icache.entry_mask = cpu_data->icache.way_incr - + cpu_data->icache.linesz; + + cpu_data->icache.way_size = cpu_data->icache.sets * + cpu_data->icache.linesz; + + /* And the rest of the D-cache */ if (cpu_data->dcache.ways > 1) { size = sizes[(cvr >> 16) & 0xf]; cpu_data->dcache.way_incr = (size >> 1); cpu_data->dcache.sets = (size >> 6); - cpu_data->dcache.entry_mask = - (cpu_data->dcache.way_incr - (1 << 5)); + } + + cpu_data->dcache.entry_mask = cpu_data->dcache.way_incr - + cpu_data->dcache.linesz; + + cpu_data->dcache.way_size = cpu_data->dcache.sets * + cpu_data->dcache.linesz; + + /* + * Setup the L2 cache desc + * + * SH-4A's have an optional PIPT L2. + */ + if (cpu_data->flags & CPU_HAS_L2_CACHE) { + /* + * Size calculation is much more sensible + * than it is for the L1. + * + * Sizes are 128KB, 258KB, 512KB, and 1MB. + */ + size = (cvr & 0xf) << 17; + + BUG_ON(!size); + + cpu_data->scache.way_incr = (1 << 16); + cpu_data->scache.entry_shift = 5; + cpu_data->scache.ways = 4; + cpu_data->scache.linesz = L1_CACHE_BYTES; + cpu_data->scache.entry_mask = + (cpu_data->scache.way_incr - cpu_data->scache.linesz); + cpu_data->scache.sets = size / + (cpu_data->scache.linesz * cpu_data->scache.ways); + cpu_data->scache.way_size = + (cpu_data->scache.sets * cpu_data->scache.linesz); } return 0; } - diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c new file mode 100644 index 00000000000..6e4e9654135 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -0,0 +1,43 @@ +/* + * SH4-202 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh4202_devices[] __initdata = { + &sci_device, +}; + +static int __init sh4202_devices_setup(void) +{ + return platform_add_devices(sh4202_devices, + ARRAY_SIZE(sh4202_devices)); +} +__initcall(sh4202_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh73180.c b/arch/sh/kernel/cpu/sh4/setup-sh73180.c new file mode 100644 index 00000000000..cc9ea1e2e5d --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh73180.c @@ -0,0 +1,43 @@ +/* + * SH73180 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 81, 83, 82 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh73180_devices[] __initdata = { + &sci_device, +}; + +static int __init sh73180_devices_setup(void) +{ + return platform_add_devices(sh73180_devices, + ARRAY_SIZE(sh73180_devices)); +} +__initcall(sh73180_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7343.c b/arch/sh/kernel/cpu/sh4/setup-sh7343.c new file mode 100644 index 00000000000..91d61cf91ba --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh7343.c @@ -0,0 +1,43 @@ +/* + * SH7343 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 81, 83, 82 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7343_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7343_devices_setup(void) +{ + return platform_add_devices(sh7343_devices, + ARRAY_SIZE(sh7343_devices)); +} +__initcall(sh7343_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c new file mode 100644 index 00000000000..50812d57c1c --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -0,0 +1,48 @@ +/* + * SH7750/SH7751 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 24, 25, 0 }, + }, { + .mapbase = 0xffe80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7750_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7750_devices_setup(void) +{ + return platform_add_devices(sh7750_devices, + ARRAY_SIZE(sh7750_devices)); +} +__initcall(sh7750_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c new file mode 100644 index 00000000000..97f1c9af35d --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -0,0 +1,53 @@ +/* + * SH7760 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfe600000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, + }, { + .mapbase = 0xfe610000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 72, 73, 75, 74 }, + }, { + .mapbase = 0xfe620000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 77, 79, 78 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7760_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7760_devices_setup(void) +{ + return platform_add_devices(sh7760_devices, + ARRAY_SIZE(sh7760_devices)); +} +__initcall(sh7760_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7770.c b/arch/sh/kernel/cpu/sh4/setup-sh7770.c new file mode 100644 index 00000000000..6a04cc5f5ac --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh7770.c @@ -0,0 +1,53 @@ +/* + * SH7770 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xff923000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 61, 61, 61, 61 }, + }, { + .mapbase = 0xff924000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 62, 62, 62, 62 }, + }, { + .mapbase = 0xff925000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 63, 63, 63, 63 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7770_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7770_devices_setup(void) +{ + return platform_add_devices(sh7770_devices, + ARRAY_SIZE(sh7770_devices)); +} +__initcall(sh7770_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c new file mode 100644 index 00000000000..72493f259ed --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -0,0 +1,79 @@ +/* + * SH7780 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xffe80000, + .end = 0xffe80000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 22, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 23, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 77, 79, 78 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7780_devices[] __initdata = { + &rtc_device, + &sci_device, +}; + +static int __init sh7780_devices_setup(void) +{ + return platform_add_devices(sh7780_devices, + ARRAY_SIZE(sh7780_devices)); +} +__initcall(sh7780_devices_setup); diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index b09805f3ee2..7bcc73f9b8d 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -1,49 +1,52 @@ /* - * arch/sh/kernel/cpu/sq.c + * arch/sh/kernel/cpu/sh4/sq.c * * General management API for SH-4 integrated Store Queues * - * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2001 - 2006 Paul Mundt * Copyright (C) 2001, 2002 M. R. Brown * - * Some of this code has been adopted directly from the old arch/sh/mm/sq.c - * hack that was part of the LinuxDC project. For all intents and purposes, - * this is a completely new interface that really doesn't have much in common - * with the old zone-based approach at all. In fact, it's only listed here for - * general completeness. - * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include <linux/init.h> +#include <linux/cpu.h> +#include <linux/bitmap.h> +#include <linux/sysdev.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/list.h> -#include <linux/proc_fs.h> -#include <linux/miscdevice.h> #include <linux/vmalloc.h> - +#include <linux/mm.h> #include <asm/io.h> #include <asm/page.h> -#include <asm/mmu_context.h> +#include <asm/cacheflush.h> #include <asm/cpu/sq.h> -static LIST_HEAD(sq_mapping_list); +struct sq_mapping; + +struct sq_mapping { + const char *name; + + unsigned long sq_addr; + unsigned long addr; + unsigned int size; + + struct sq_mapping *next; +}; + +static struct sq_mapping *sq_mapping_list; static DEFINE_SPINLOCK(sq_mapping_lock); +static kmem_cache_t *sq_cache; +static unsigned long *sq_bitmap; -/** - * sq_flush - Flush (prefetch) the store queue cache - * @addr: the store queue address to flush - * - * Executes a prefetch instruction on the specified store queue cache, - * so that the cached data is written to physical memory. - */ -inline void sq_flush(void *addr) -{ - __asm__ __volatile__ ("pref @%0" : : "r" (addr) : "memory"); -} +#define store_queue_barrier() \ +do { \ + (void)ctrl_inl(P4SEG_STORE_QUE); \ + ctrl_outl(0, P4SEG_STORE_QUE + 0); \ + ctrl_outl(0, P4SEG_STORE_QUE + 8); \ +} while (0); /** * sq_flush_range - Flush (prefetch) a specific SQ range @@ -56,152 +59,73 @@ inline void sq_flush(void *addr) void sq_flush_range(unsigned long start, unsigned int len) { volatile unsigned long *sq = (unsigned long *)start; - unsigned long dummy; /* Flush the queues */ for (len >>= 5; len--; sq += 8) - sq_flush((void *)sq); + prefetchw((void *)sq); /* Wait for completion */ - dummy = ctrl_inl(P4SEG_STORE_QUE); - - ctrl_outl(0, P4SEG_STORE_QUE + 0); - ctrl_outl(0, P4SEG_STORE_QUE + 8); + store_queue_barrier(); } -static struct sq_mapping *__sq_alloc_mapping(unsigned long virt, unsigned long phys, unsigned long size, const char *name) +static inline void sq_mapping_list_add(struct sq_mapping *map) { - struct sq_mapping *map; - - if (virt + size > SQ_ADDRMAX) - return ERR_PTR(-ENOSPC); - - map = kmalloc(sizeof(struct sq_mapping), GFP_KERNEL); - if (!map) - return ERR_PTR(-ENOMEM); + struct sq_mapping **p, *tmp; - INIT_LIST_HEAD(&map->list); + spin_lock_irq(&sq_mapping_lock); - map->sq_addr = virt; - map->addr = phys; - map->size = size + 1; - map->name = name; + p = &sq_mapping_list; + while ((tmp = *p) != NULL) + p = &tmp->next; - list_add(&map->list, &sq_mapping_list); + map->next = tmp; + *p = map; - return map; + spin_unlock_irq(&sq_mapping_lock); } -static unsigned long __sq_get_next_addr(void) +static inline void sq_mapping_list_del(struct sq_mapping *map) { - if (!list_empty(&sq_mapping_list)) { - struct list_head *pos, *tmp; - - /* - * Read one off the list head, as it will have the highest - * mapped allocation. Set the next one up right above it. - * - * This is somewhat sub-optimal, as we don't look at - * gaps between allocations or anything lower then the - * highest-level allocation. - * - * However, in the interest of performance and the general - * lack of desire to do constant list rebalancing, we don't - * worry about it. - */ - list_for_each_safe(pos, tmp, &sq_mapping_list) { - struct sq_mapping *entry; - - entry = list_entry(pos, typeof(*entry), list); - - return entry->sq_addr + entry->size; + struct sq_mapping **p, *tmp; + + spin_lock_irq(&sq_mapping_lock); + + for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next) + if (tmp == map) { + *p = tmp->next; + break; } - } - return P4SEG_STORE_QUE; + spin_unlock_irq(&sq_mapping_lock); } -/** - * __sq_remap - Perform a translation from the SQ to a phys addr - * @map: sq mapping containing phys and store queue addresses. - * - * Maps the store queue address specified in the mapping to the physical - * address specified in the mapping. - */ -static struct sq_mapping *__sq_remap(struct sq_mapping *map) +static int __sq_remap(struct sq_mapping *map, unsigned long flags) { - unsigned long flags, pteh, ptel; +#if defined(CONFIG_MMU) struct vm_struct *vma; - pgprot_t pgprot; - - /* - * Without an MMU (or with it turned off), this is much more - * straightforward, as we can just load up each queue's QACR with - * the physical address appropriately masked. - */ - - ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0); - ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1); -#ifdef CONFIG_MMU - /* - * With an MMU on the other hand, things are slightly more involved. - * Namely, we have to have a direct mapping between the SQ addr and - * the associated physical address in the UTLB by way of setting up - * a virt<->phys translation by hand. We do this by simply specifying - * the SQ addr in UTLB.VPN and the associated physical address in - * UTLB.PPN. - * - * Notably, even though this is a special case translation, and some - * of the configuration bits are meaningless, we're still required - * to have a valid ASID context in PTEH. - * - * We could also probably get by without explicitly setting PTEA, but - * we do it here just for good measure. - */ - spin_lock_irqsave(&sq_mapping_lock, flags); - - pteh = map->sq_addr; - ctrl_outl((pteh & MMU_VPN_MASK) | get_asid(), MMU_PTEH); - - ptel = map->addr & PAGE_MASK; - ctrl_outl(((ptel >> 28) & 0xe) | (ptel & 0x1), MMU_PTEA); - - pgprot = pgprot_noncached(PAGE_KERNEL); - - ptel &= _PAGE_FLAGS_HARDWARE_MASK; - ptel |= pgprot_val(pgprot); - ctrl_outl(ptel, MMU_PTEL); - - __asm__ __volatile__ ("ldtlb" : : : "memory"); - - spin_unlock_irqrestore(&sq_mapping_lock, flags); - - /* - * Next, we need to map ourselves in the kernel page table, so that - * future accesses after a TLB flush will be handled when we take a - * page fault. - * - * Theoretically we could just do this directly and not worry about - * setting up the translation by hand ahead of time, but for the - * cases where we want a one-shot SQ mapping followed by a quick - * writeout before we hit the TLB flush, we do it anyways. This way - * we at least save ourselves the initial page fault overhead. - */ vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX); if (!vma) - return ERR_PTR(-ENOMEM); + return -ENOMEM; vma->phys_addr = map->addr; if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr, - map->size, pgprot_val(pgprot))) { + map->size, flags)) { vunmap(vma->addr); - return NULL; + return -EAGAIN; } -#endif /* CONFIG_MMU */ +#else + /* + * Without an MMU (or with it turned off), this is much more + * straightforward, as we can just load up each queue's QACR with + * the physical address appropriately masked. + */ + ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0); + ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1); +#endif - return map; + return 0; } /** @@ -209,42 +133,65 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map) * @phys: Physical address of mapping. * @size: Length of mapping. * @name: User invoking mapping. + * @flags: Protection flags. * * Remaps the physical address @phys through the next available store queue * address of @size length. @name is logged at boot time as well as through - * the procfs interface. - * - * A pre-allocated and filled sq_mapping pointer is returned, and must be - * cleaned up with a call to sq_unmap() when the user is done with the - * mapping. + * the sysfs interface. */ -struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name) +unsigned long sq_remap(unsigned long phys, unsigned int size, + const char *name, unsigned long flags) { struct sq_mapping *map; - unsigned long virt, end; + unsigned long end; unsigned int psz; + int ret, page; /* Don't allow wraparound or zero size */ end = phys + size - 1; - if (!size || end < phys) - return NULL; + if (unlikely(!size || end < phys)) + return -EINVAL; /* Don't allow anyone to remap normal memory.. */ - if (phys < virt_to_phys(high_memory)) - return NULL; + if (unlikely(phys < virt_to_phys(high_memory))) + return -EINVAL; phys &= PAGE_MASK; + size = PAGE_ALIGN(end + 1) - phys; + + map = kmem_cache_alloc(sq_cache, GFP_KERNEL); + if (unlikely(!map)) + return -ENOMEM; + + map->addr = phys; + map->size = size; + map->name = name; + + page = bitmap_find_free_region(sq_bitmap, 0x04000000, + get_order(map->size)); + if (unlikely(page < 0)) { + ret = -ENOSPC; + goto out; + } + + map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT); + + ret = __sq_remap(map, flags); + if (unlikely(ret != 0)) + goto out; + + psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + pr_info("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n", + likely(map->name) ? map->name : "???", + psz, psz == 1 ? " " : "s", + map->sq_addr, map->addr); - size = PAGE_ALIGN(end + 1) - phys; - virt = __sq_get_next_addr(); - psz = (size + (PAGE_SIZE - 1)) / PAGE_SIZE; - map = __sq_alloc_mapping(virt, phys, size, name); + sq_mapping_list_add(map); - printk("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n", - map->name ? map->name : "???", - psz, psz == 1 ? " " : "s", - map->sq_addr, map->addr); + return map->sq_addr; - return __sq_remap(map); +out: + kmem_cache_free(sq_cache, map); + return ret; } /** @@ -255,188 +202,198 @@ struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *n * sq_remap(). Also frees up the pte that was previously inserted into * the kernel page table and discards the UTLB translation. */ -void sq_unmap(struct sq_mapping *map) +void sq_unmap(unsigned long vaddr) { - if (map->sq_addr > (unsigned long)high_memory) - vfree((void *)(map->sq_addr & PAGE_MASK)); + struct sq_mapping **p, *map; + struct vm_struct *vma; + int page; - list_del(&map->list); - kfree(map); -} + for (p = &sq_mapping_list; (map = *p); p = &map->next) + if (map->sq_addr == vaddr) + break; -/** - * sq_clear - Clear a store queue range - * @addr: Address to start clearing from. - * @len: Length to clear. - * - * A quick zero-fill implementation for clearing out memory that has been - * remapped through the store queues. - */ -void sq_clear(unsigned long addr, unsigned int len) -{ - int i; + if (unlikely(!map)) { + printk("%s: bad store queue address 0x%08lx\n", + __FUNCTION__, vaddr); + return; + } - /* Clear out both queues linearly */ - for (i = 0; i < 8; i++) { - ctrl_outl(0, addr + i + 0); - ctrl_outl(0, addr + i + 8); + page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT; + bitmap_release_region(sq_bitmap, page, get_order(map->size)); + +#ifdef CONFIG_MMU + vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK)); + if (!vma) { + printk(KERN_ERR "%s: bad address 0x%08lx\n", + __FUNCTION__, map->sq_addr); + return; } +#endif + + sq_mapping_list_del(map); - sq_flush_range(addr, len); + kmem_cache_free(sq_cache, map); } -/** - * sq_vma_unmap - Unmap a VMA range - * @area: VMA containing range. - * @addr: Start of range. - * @len: Length of range. +/* + * Needlessly complex sysfs interface. Unfortunately it doesn't seem like + * there is any other easy way to add things on a per-cpu basis without + * putting the directory entries somewhere stupid and having to create + * links in sysfs by hand back in to the per-cpu directories. * - * Searches the sq_mapping_list for a mapping matching the sq addr @addr, - * and subsequently frees up the entry. Further cleanup is done by generic - * code. + * Some day we may want to have an additional abstraction per store + * queue, but considering the kobject hell we already have to deal with, + * it's simply not worth the trouble. */ -static void sq_vma_unmap(struct vm_area_struct *area, - unsigned long addr, size_t len) -{ - struct list_head *pos, *tmp; +static struct kobject *sq_kobject[NR_CPUS]; - list_for_each_safe(pos, tmp, &sq_mapping_list) { - struct sq_mapping *entry; +struct sq_sysfs_attr { + struct attribute attr; + ssize_t (*show)(char *buf); + ssize_t (*store)(const char *buf, size_t count); +}; - entry = list_entry(pos, typeof(*entry), list); +#define to_sq_sysfs_attr(attr) container_of(attr, struct sq_sysfs_attr, attr) - if (entry->sq_addr == addr) { - /* - * We could probably get away without doing the tlb flush - * here, as generic code should take care of most of this - * when unmapping the rest of the VMA range for us. Leave - * it in for added sanity for the time being.. - */ - __flush_tlb_page(get_asid(), entry->sq_addr & PAGE_MASK); +static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr); - list_del(&entry->list); - kfree(entry); + if (likely(sattr->show)) + return sattr->show(buf); - return; - } - } + return -EIO; } -/** - * sq_vma_sync - Sync a VMA range - * @area: VMA containing range. - * @start: Start of range. - * @len: Length of range. - * @flags: Additional flags. - * - * Synchronizes an sq mapped range by flushing the store queue cache for - * the duration of the mapping. - * - * Used internally for user mappings, which must use msync() to prefetch - * the store queue cache. - */ -static int sq_vma_sync(struct vm_area_struct *area, - unsigned long start, size_t len, unsigned int flags) +static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) { - sq_flush_range(start, len); + struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr); - return 0; + if (likely(sattr->store)) + return sattr->store(buf, count); + + return -EIO; } -static struct vm_operations_struct sq_vma_ops = { - .unmap = sq_vma_unmap, - .sync = sq_vma_sync, -}; +static ssize_t mapping_show(char *buf) +{ + struct sq_mapping **list, *entry; + char *p = buf; -/** - * sq_mmap - mmap() for /dev/cpu/sq - * @file: unused. - * @vma: VMA to remap. - * - * Remap the specified vma @vma through the store queues, and setup associated - * information for the new mapping. Also build up the page tables for the new - * area. - */ -static int sq_mmap(struct file *file, struct vm_area_struct *vma) + for (list = &sq_mapping_list; (entry = *list); list = &entry->next) + p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n", + entry->sq_addr, entry->sq_addr + entry->size, + entry->addr, entry->name); + + return p - buf; +} + +static ssize_t mapping_store(const char *buf, size_t count) { - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - unsigned long size = vma->vm_end - vma->vm_start; - struct sq_mapping *map; + unsigned long base = 0, len = 0; - /* - * We're not interested in any arbitrary virtual address that has - * been stuck in the VMA, as we already know what addresses we - * want. Save off the size, and reposition the VMA to begin at - * the next available sq address. - */ - vma->vm_start = __sq_get_next_addr(); - vma->vm_end = vma->vm_start + size; + sscanf(buf, "%lx %lx", &base, &len); + if (!base) + return -EIO; - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + if (likely(len)) { + int ret = sq_remap(base, len, "Userspace", + pgprot_val(PAGE_SHARED)); + if (ret < 0) + return ret; + } else + sq_unmap(base); - vma->vm_flags |= VM_IO | VM_RESERVED; + return count; +} - map = __sq_alloc_mapping(vma->vm_start, offset, size, "Userspace"); +static struct sq_sysfs_attr mapping_attr = + __ATTR(mapping, 0644, mapping_show, mapping_store); - if (io_remap_pfn_range(vma, map->sq_addr, map->addr >> PAGE_SHIFT, - size, vma->vm_page_prot)) - return -EAGAIN; +static struct attribute *sq_sysfs_attrs[] = { + &mapping_attr.attr, + NULL, +}; - vma->vm_ops = &sq_vma_ops; +static struct sysfs_ops sq_sysfs_ops = { + .show = sq_sysfs_show, + .store = sq_sysfs_store, +}; - return 0; -} +static struct kobj_type ktype_percpu_entry = { + .sysfs_ops = &sq_sysfs_ops, + .default_attrs = sq_sysfs_attrs, +}; -#ifdef CONFIG_PROC_FS -static int sq_mapping_read_proc(char *buf, char **start, off_t off, - int len, int *eof, void *data) +static int __devinit sq_sysdev_add(struct sys_device *sysdev) { - struct list_head *pos; - char *p = buf; + unsigned int cpu = sysdev->id; + struct kobject *kobj; - list_for_each_prev(pos, &sq_mapping_list) { - struct sq_mapping *entry; + sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL); + if (unlikely(!sq_kobject[cpu])) + return -ENOMEM; - entry = list_entry(pos, typeof(*entry), list); + kobj = sq_kobject[cpu]; + kobj->parent = &sysdev->kobj; + kobject_set_name(kobj, "%s", "sq"); + kobj->ktype = &ktype_percpu_entry; - p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n", entry->sq_addr, - entry->sq_addr + entry->size - 1, entry->addr, - entry->name); - } - - return p - buf; + return kobject_register(kobj); } -#endif -static struct file_operations sq_fops = { - .owner = THIS_MODULE, - .mmap = sq_mmap, -}; +static int __devexit sq_sysdev_remove(struct sys_device *sysdev) +{ + unsigned int cpu = sysdev->id; + struct kobject *kobj = sq_kobject[cpu]; -static struct miscdevice sq_dev = { - .minor = STORE_QUEUE_MINOR, - .name = "sq", - .fops = &sq_fops, + kobject_unregister(kobj); + return 0; +} + +static struct sysdev_driver sq_sysdev_driver = { + .add = sq_sysdev_add, + .remove = __devexit_p(sq_sysdev_remove), }; static int __init sq_api_init(void) { - int ret; + unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT; + unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG; + int ret = -ENOMEM; + printk(KERN_NOTICE "sq: Registering store queue API.\n"); - create_proc_read_entry("sq_mapping", 0, 0, sq_mapping_read_proc, 0); + sq_cache = kmem_cache_create("store_queue_cache", + sizeof(struct sq_mapping), 0, 0, + NULL, NULL); + if (unlikely(!sq_cache)) + return ret; - ret = misc_register(&sq_dev); - if (ret) - remove_proc_entry("sq_mapping", NULL); + sq_bitmap = kzalloc(size, GFP_KERNEL); + if (unlikely(!sq_bitmap)) + goto out; + + ret = sysdev_driver_register(&cpu_sysdev_class, &sq_sysdev_driver); + if (unlikely(ret != 0)) + goto out; + + return 0; + +out: + kfree(sq_bitmap); + kmem_cache_destroy(sq_cache); return ret; } static void __exit sq_api_exit(void) { - misc_deregister(&sq_dev); - remove_proc_entry("sq_mapping", NULL); + sysdev_driver_unregister(&cpu_sysdev_class, &sq_sysdev_driver); + kfree(sq_bitmap); + kmem_cache_destroy(sq_cache); } module_init(sq_api_init); @@ -445,11 +402,7 @@ module_exit(sq_api_exit); MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>"); MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues"); MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(STORE_QUEUE_MINOR); EXPORT_SYMBOL(sq_remap); EXPORT_SYMBOL(sq_unmap); -EXPORT_SYMBOL(sq_clear); -EXPORT_SYMBOL(sq_flush); EXPORT_SYMBOL(sq_flush_range); - diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 1378db375e1..a00022722e9 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -3,7 +3,7 @@ * * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2002 M. R. Brown - * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -49,7 +49,7 @@ static int __init sh_console_setup(struct console *co, char *options) return 0; } -static struct console early_console = { +static struct console bios_console = { .name = "bios", .write = sh_console_write, .setup = sh_console_setup, @@ -59,34 +59,43 @@ static struct console early_console = { #endif #ifdef CONFIG_EARLY_SCIF_CONSOLE +#include <linux/serial_core.h> +#include "../../../drivers/serial/sh-sci.h" + +#ifdef CONFIG_CPU_SH4 #define SCIF_REG 0xffe80000 +#elif defined(CONFIG_CPU_SUBTYPE_SH72060) +#define SCIF_REG 0xfffe9800 +#else +#error "Undefined SCIF for this subtype" +#endif + +static struct uart_port scif_port = { + .mapbase = SCIF_REG, + .membase = (char __iomem *)SCIF_REG, +}; static void scif_sercon_putc(int c) { - while (!(ctrl_inw(SCIF_REG + 0x10) & 0x20)) ; + while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16)) + ; - ctrl_outb(c, SCIF_REG + 12); - ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0x9f), SCIF_REG + 0x10); + sci_out(&scif_port, SCxTDR, c); + sci_in(&scif_port, SCxSR); + sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40)); + + while ((sci_in(&scif_port, SCxSR) & 0x40) == 0); + ; if (c == '\n') scif_sercon_putc('\r'); } -static void scif_sercon_flush(void) -{ - ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10); - - while (!(ctrl_inw(SCIF_REG + 0x10) & 0x40)) ; - - ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10); -} - -static void scif_sercon_write(struct console *con, const char *s, unsigned count) +static void scif_sercon_write(struct console *con, const char *s, + unsigned count) { while (count-- > 0) scif_sercon_putc(*s++); - - scif_sercon_flush(); } static int __init scif_sercon_setup(struct console *con, char *options) @@ -96,7 +105,7 @@ static int __init scif_sercon_setup(struct console *con, char *options) return 0; } -static struct console early_console = { +static struct console scif_console = { .name = "sercon", .write = scif_sercon_write, .setup = scif_sercon_setup, @@ -104,7 +113,7 @@ static struct console early_console = { .index = -1, }; -void scif_sercon_init(int baud) +static void scif_sercon_init(int baud) { ctrl_outw(0, SCIF_REG + 8); ctrl_outw(0, SCIF_REG); @@ -122,16 +131,61 @@ void scif_sercon_init(int baud) } #endif -void __init enable_early_printk(void) +/* + * Setup a default console, if more than one is compiled in, rely on the + * earlyprintk= parsing to give priority. + */ +static struct console *early_console = +#ifdef CONFIG_SH_STANDARD_BIOS + &bios_console +#elif defined(CONFIG_EARLY_SCIF_CONSOLE) + &scif_console +#else + NULL +#endif + ; + +static int __initdata keep_early; + +int __init setup_early_printk(char *opt) { -#ifdef CONFIG_EARLY_SCIF_CONSOLE - scif_sercon_init(115200); + char *space; + char buf[256]; + + strlcpy(buf, opt, sizeof(buf)); + space = strchr(buf, ' '); + if (space) + *space = 0; + + if (strstr(buf, "keep")) + keep_early = 1; + +#ifdef CONFIG_SH_STANDARD_BIOS + if (!strncmp(buf, "bios", 4)) + early_console = &bios_console; +#endif +#if defined(CONFIG_EARLY_SCIF_CONSOLE) + if (!strncmp(buf, "serial", 6)) { + early_console = &scif_console; + +#ifdef CONFIG_CPU_SH4 + scif_sercon_init(115200); +#endif + } #endif - register_console(&early_console); + + if (likely(early_console)) + register_console(early_console); + + return 1; } +__setup("earlyprintk=", setup_early_printk); -void disable_early_printk(void) +void __init disable_early_printk(void) { - unregister_console(&early_console); + if (!keep_early) { + printk("disabling early console\n"); + unregister_console(early_console); + } else + printk("keeping early console\n"); } - diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S index 7dfd2ba75f7..fe8221855b2 100644 --- a/arch/sh/kernel/entry.S +++ b/arch/sh/kernel/entry.S @@ -18,24 +18,6 @@ #include <asm/cpu/mmu_context.h> #include <asm/unistd.h> -#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) -#define sys_nfsservctl sys_ni_syscall -#endif - -#if !defined(CONFIG_MMU) -#define sys_madvise sys_ni_syscall -#define sys_readahead sys_ni_syscall -#define sys_mprotect sys_ni_syscall -#define sys_msync sys_ni_syscall -#define sys_mlock sys_ni_syscall -#define sys_munlock sys_ni_syscall -#define sys_mlockall sys_ni_syscall -#define sys_munlockall sys_ni_syscall -#define sys_mremap sys_ni_syscall -#define sys_mincore sys_ni_syscall -#define sys_remap_file_pages sys_ni_syscall -#endif - ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address ! to be jumped is too far, but it causes illegal slot exception. @@ -326,7 +308,7 @@ ENTRY(exception_error) .align 2 ret_from_exception: preempt_stop() -ret_from_irq: +ENTRY(ret_from_irq) ! mov #OFF_SR, r0 mov.l @(r0,r15), r0 ! get status register @@ -389,11 +371,12 @@ work_pending: ! r8: current_thread_info ! t: result of "tst #_TIF_NEED_RESCHED, r0" bf/s work_resched - tst #_TIF_SIGPENDING, r0 + tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0 work_notifysig: bt/s restore_all mov r15, r4 - mov #0, r5 + mov r12, r5 ! set arg1(save_r0) + mov r0, r6 mov.l 2f, r1 mova restore_all, r0 jmp @r1 @@ -431,7 +414,7 @@ work_resched: .align 2 1: .long schedule -2: .long do_signal +2: .long do_notify_resume .align 2 syscall_exit_work: @@ -552,6 +535,7 @@ syscall_call: mov.l @r9, r8 jsr @r8 ! jump to specific syscall handler nop + mov.l @(OFF_R0,r15), r12 ! save r0 mov.l r0, @(OFF_R0,r15) ! save the return value ! syscall_exit: @@ -644,7 +628,7 @@ skip_restore: ! #if defined(CONFIG_KGDB_NMI) ! Clear in_nmi - mov.l 4f, k0 + mov.l 6f, k0 mov #0, k1 mov.b k1, @k0 #endif @@ -722,7 +706,7 @@ interrupt: ! ! .align 2 -handle_exception: +ENTRY(handle_exception) ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), ! save all registers onto stack. ! @@ -732,8 +716,8 @@ handle_exception: bt/s 1f ! It's a kernel to kernel transition. mov r15, k0 ! save original stack to k0 /* User space to kernel */ - mov #0x20, k1 - shll8 k1 ! k1 := 8192 (== THREAD_SIZE) + mov #(THREAD_SIZE >> 8), k1 + shll8 k1 ! k1 := THREAD_SIZE add current, k1 mov k1, r15 ! change to kernel stack ! @@ -838,300 +822,3 @@ ENTRY(exception_none) rts nop - .data -ENTRY(sys_call_table) - .long sys_ni_syscall /* 0 - old "setup()" system call*/ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long old_readdir - .long old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_uname - .long sys_ni_syscall /* 110 */ /* iopl */ - .long sys_vhangup - .long sys_ni_syscall /* idle */ - .long sys_ni_syscall /* vm86old */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* sys_modify_ldt */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* vm86 */ - .long sys_ni_syscall /* old "query_module" */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread_wrapper /* 180 */ - .long sys_pwrite_wrapper - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall - .long sys_ni_syscall - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64_wrapper - .long sys_ni_syscall /* Reserved for vserver */ - .long sys_ni_syscall /* Reserved for mbind */ - .long sys_ni_syscall /* 275 - get_mempolicy */ - .long sys_ni_syscall /* set_mempolicy */ - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_ni_syscall /* Reserved for kexec */ - .long sys_waitid - .long sys_add_key /* 285 */ - .long sys_request_key - .long sys_keyctl - .long sys_ioprio_set - .long sys_ioprio_get - .long sys_inotify_init /* 290 */ - .long sys_inotify_add_watch - .long sys_inotify_rm_watch - -/* End of entry.S */ diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S index 9b9e6ef626c..f5f53d14f24 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head.S @@ -11,6 +11,18 @@ * Head.S contains the SH exception handlers and startup code. */ #include <linux/linkage.h> +#include <asm/thread_info.h> + +#ifdef CONFIG_CPU_SH4A +#define SYNCO() synco + +#define PREFI(label, reg) \ + mov.l label, reg; \ + prefi @reg +#else +#define SYNCO() +#define PREFI(label, reg) +#endif .section .empty_zero_page, "aw" ENTRY(empty_zero_page) @@ -42,18 +54,25 @@ ENTRY(_stext) ! Initialize global interrupt mask mov #0, r0 ldc r0, r6_bank + + /* + * Prefetch if possible to reduce cache miss penalty. + * + * We do this early on for SH-4A as a micro-optimization, + * as later on we will have speculative execution enabled + * and this will become less of an issue. + */ + PREFI(5f, r0) + PREFI(6f, r0) + ! mov.l 2f, r0 mov r0, r15 ! Set initial r15 (stack pointer) - mov #0x20, r1 ! - shll8 r1 ! r1 = 8192 + mov #(THREAD_SIZE >> 8), r1 + shll8 r1 ! r1 = THREAD_SIZE sub r1, r0 ! ldc r0, r7_bank ! ... and initial thread_info - ! - ! Additional CPU initialization - mov.l 6f, r0 - jsr @r0 - nop + ! Clear BSS area mov.l 3f, r1 add #4, r1 @@ -62,6 +81,14 @@ ENTRY(_stext) 9: cmp/hs r2, r1 bf/s 9b ! while (r1 < r2) mov.l r0,@-r2 + + ! Additional CPU initialization + mov.l 6f, r0 + jsr @r0 + nop + + SYNCO() ! Wait for pending instructions.. + ! Start kernel mov.l 5f, r0 jmp @r0 @@ -69,7 +96,7 @@ ENTRY(_stext) .balign 4 1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF -2: .long stack +2: .long init_thread_union+THREAD_SIZE 3: .long __bss_start 4: .long _end 5: .long start_kernel diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 71c9fde2fd9..501fe03e371 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -61,6 +61,73 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count) } EXPORT_SYMBOL(memset_io); +void __raw_readsl(unsigned long addr, void *datap, int len) +{ + u32 *data; + + for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--) + *data++ = ctrl_inl(addr); + + if (likely(len >= (0x20 >> 2))) { + int tmp2, tmp3, tmp4, tmp5, tmp6; + + __asm__ __volatile__( + "1: \n\t" + "mov.l @%7, r0 \n\t" + "mov.l @%7, %2 \n\t" +#ifdef CONFIG_CPU_SH4 + "movca.l r0, @%0 \n\t" +#else + "mov.l r0, @%0 \n\t" +#endif + "mov.l @%7, %3 \n\t" + "mov.l @%7, %4 \n\t" + "mov.l @%7, %5 \n\t" + "mov.l @%7, %6 \n\t" + "mov.l @%7, r7 \n\t" + "mov.l @%7, r0 \n\t" + "mov.l %2, @(0x04,%0) \n\t" + "mov #0x20>>2, %2 \n\t" + "mov.l %3, @(0x08,%0) \n\t" + "sub %2, %1 \n\t" + "mov.l %4, @(0x0c,%0) \n\t" + "cmp/hi %1, %2 ! T if 32 > len \n\t" + "mov.l %5, @(0x10,%0) \n\t" + "mov.l %6, @(0x14,%0) \n\t" + "mov.l r7, @(0x18,%0) \n\t" + "mov.l r0, @(0x1c,%0) \n\t" + "bf.s 1b \n\t" + " add #0x20, %0 \n\t" + : "=&r" (data), "=&r" (len), + "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4), + "=&r" (tmp5), "=&r" (tmp6) + : "r"(addr), "0" (data), "1" (len) + : "r0", "r7", "t", "memory"); + } + + for (; len != 0; len--) + *data++ = ctrl_inl(addr); +} +EXPORT_SYMBOL(__raw_readsl); + +void __raw_writesl(unsigned long addr, const void *data, int len) +{ + if (likely(len != 0)) { + int tmp1; + + __asm__ __volatile__ ( + "1: \n\t" + "mov.l @%0+, %1 \n\t" + "dt %3 \n\t" + "bf.s 1b \n\t" + " mov.l %1, @%4 \n\t" + : "=&r" (data), "=&r" (tmp1) + : "0" (data), "r" (len), "r"(addr) + : "t", "memory"); + } +} +EXPORT_SYMBOL(__raw_writesl); + void __iomem *ioport_map(unsigned long port, unsigned int nr) { return sh_mv.mv_ioport_map(port, nr); diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index c2e07f7f349..c7ebd6aec95 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -1,5 +1,4 @@ -/* $Id: irq.c,v 1.20 2004/01/13 05:52:11 kkojima Exp $ - * +/* * linux/arch/sh/kernel/irq.c * * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar @@ -7,13 +6,15 @@ * * SuperH version: Copyright (C) 1999 Niibe Yutaka */ - #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> #include <asm/irq.h> #include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/thread_info.h> #include <asm/cpu/mmu_context.h> /* @@ -60,15 +61,46 @@ unlock: } #endif +#ifdef CONFIG_4KSTACKS +/* + * per-CPU IRQ handling contexts (thread information and stack) + */ +union irq_ctx { + struct thread_info tinfo; + u32 stack[THREAD_SIZE/sizeof(u32)]; +}; + +static union irq_ctx *hardirq_ctx[NR_CPUS]; +static union irq_ctx *softirq_ctx[NR_CPUS]; +#endif asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) { int irq = r4; +#ifdef CONFIG_4KSTACKS + union irq_ctx *curctx, *irqctx; +#endif irq_enter(); +#ifdef CONFIG_DEBUG_STACKOVERFLOW + /* Debugging check for stack overflow: is there less than 1KB free? */ + { + long sp; + + __asm__ __volatile__ ("and r15, %0" : + "=r" (sp) : "0" (THREAD_SIZE - 1)); + + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { + printk("do_IRQ: stack overflow: %ld\n", + sp - sizeof(struct thread_info)); + dump_stack(); + } + } +#endif + #ifdef CONFIG_CPU_HAS_INTEVT __asm__ __volatile__ ( #ifdef CONFIG_CPU_HAS_SR_RB @@ -87,7 +119,135 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, #endif irq = irq_demux(irq); - __do_IRQ(irq, ®s); + +#ifdef CONFIG_4KSTACKS + curctx = (union irq_ctx *)current_thread_info(); + irqctx = hardirq_ctx[smp_processor_id()]; + + /* + * this is where we switch to the IRQ stack. However, if we are + * already using the IRQ stack (because we interrupted a hardirq + * handler) we can't do that and just have to keep using the + * current stack (which is the irq stack already after all) + */ + if (curctx != irqctx) { + u32 *isp; + + isp = (u32 *)((char *)irqctx + sizeof(*irqctx)); + irqctx->tinfo.task = curctx->tinfo.task; + irqctx->tinfo.previous_sp = current_stack_pointer; + + __asm__ __volatile__ ( + "mov %0, r4 \n" + "mov %1, r5 \n" + "mov r15, r9 \n" + "jsr @%2 \n" + /* swith to the irq stack */ + " mov %3, r15 \n" + /* restore the stack (ring zero) */ + "mov r9, r15 \n" + : /* no outputs */ + : "r" (irq), "r" (®s), "r" (__do_IRQ), "r" (isp) + /* XXX: A somewhat excessive clobber list? -PFM */ + : "memory", "r0", "r1", "r2", "r3", "r4", + "r5", "r6", "r7", "r8", "t", "pr" + ); + } else +#endif + __do_IRQ(irq, ®s); + irq_exit(); + return 1; } + +#ifdef CONFIG_4KSTACKS +/* + * These should really be __section__(".bss.page_aligned") as well, but + * gcc's 3.0 and earlier don't handle that correctly. + */ +static char softirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__aligned__(THREAD_SIZE))); + +static char hardirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__aligned__(THREAD_SIZE))); + +/* + * allocate per-cpu stacks for hardirq and for softirq processing + */ +void irq_ctx_init(int cpu) +{ + union irq_ctx *irqctx; + + if (hardirq_ctx[cpu]) + return; + + irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE]; + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + + hardirq_ctx[cpu] = irqctx; + + irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE]; + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + + softirq_ctx[cpu] = irqctx; + + printk("CPU %u irqstacks, hard=%p soft=%p\n", + cpu, hardirq_ctx[cpu], softirq_ctx[cpu]); +} + +void irq_ctx_exit(int cpu) +{ + hardirq_ctx[cpu] = NULL; +} + +extern asmlinkage void __do_softirq(void); + +asmlinkage void do_softirq(void) +{ + unsigned long flags; + struct thread_info *curctx; + union irq_ctx *irqctx; + u32 *isp; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + if (local_softirq_pending()) { + curctx = current_thread_info(); + irqctx = softirq_ctx[smp_processor_id()]; + irqctx->tinfo.task = curctx->task; + irqctx->tinfo.previous_sp = current_stack_pointer; + + /* build the stack frame on the softirq stack */ + isp = (u32 *)((char *)irqctx + sizeof(*irqctx)); + + __asm__ __volatile__ ( + "mov r15, r9 \n" + "jsr @%0 \n" + /* switch to the softirq stack */ + " mov %1, r15 \n" + /* restore the thread stack */ + "mov r9, r15 \n" + : /* no outputs */ + : "r" (__do_softirq), "r" (isp) + /* XXX: A somewhat excessive clobber list? -PFM */ + : "memory", "r0", "r1", "r2", "r3", "r4", + "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr" + ); + } + + local_irq_restore(flags); +} +EXPORT_SYMBOL(do_softirq); +#endif diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 42638b92b51..9c6315f0335 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -101,16 +101,17 @@ #include <linux/linkage.h> #include <linux/init.h> +#ifdef CONFIG_SH_KGDB_CONSOLE +#include <linux/console.h> +#endif + #include <asm/system.h> #include <asm/current.h> #include <asm/signal.h> #include <asm/pgtable.h> #include <asm/ptrace.h> #include <asm/kgdb.h> - -#ifdef CONFIG_SH_KGDB_CONSOLE -#include <linux/console.h> -#endif +#include <asm/io.h> /* Function pointers for linkage */ kgdb_debug_hook_t *kgdb_debug_hook; @@ -240,7 +241,6 @@ static jmp_buf rem_com_env; /* Misc static */ static int stepped_address; static short stepped_opcode; -static const char hexchars[] = "0123456789abcdef"; static char in_buffer[BUFMAX]; static char out_buffer[OUTBUFMAX]; @@ -253,29 +253,6 @@ typedef unsigned char threadref[8]; #define BUF_THREAD_ID_SIZE 16 #endif -/* Return addr as a real volatile address */ -static inline unsigned int ctrl_inl(const unsigned long addr) -{ - return *(volatile unsigned long *) addr; -} - -/* Correctly set *addr using volatile */ -static inline void ctrl_outl(const unsigned int b, unsigned long addr) -{ - *(volatile unsigned long *) addr = b; -} - -/* Get high hex bits */ -static char highhex(const int x) -{ - return hexchars[(x >> 4) & 0xf]; -} - -/* Get low hex bits */ -static char lowhex(const int x) -{ - return hexchars[x & 0xf]; -} /* Convert ch to hex */ static int hex(const char ch) diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 6bcd8d92399..08587cdb64d 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -29,12 +29,6 @@ extern const unsigned char relocate_new_kernel[]; extern const unsigned int relocate_new_kernel_size; extern void *gdb_vbr_vector; -/* - * Provide a dummy crash_notes definition while crash dump arrives to ppc. - * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. - */ -void *crash_notes = NULL; - void machine_shutdown(void) { } diff --git a/arch/sh/kernel/pm.c b/arch/sh/kernel/pm.c new file mode 100644 index 00000000000..10ab62c9aed --- /dev/null +++ b/arch/sh/kernel/pm.c @@ -0,0 +1,88 @@ +/* + * Generic Power Management Routine + * + * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include <linux/suspend.h> +#include <linux/delay.h> +#include <linux/gfp.h> +#include <asm/freq.h> +#include <asm/io.h> +#include <asm/watchdog.h> +#include <asm/pm.h> + +#define INTR_OFFSET 0x600 + +#define STBCR 0xffffff82 +#define STBCR2 0xffffff88 + +#define STBCR_STBY 0x80 +#define STBCR_MSTP2 0x04 + +#define MCR 0xffffff68 +#define RTCNT 0xffffff70 + +#define MCR_RMODE 2 +#define MCR_RFSH 4 + +void pm_enter(void) +{ + u8 stbcr, csr; + u16 frqcr, mcr; + u32 vbr_new, vbr_old; + + set_bl_bit(); + + /* set wdt */ + csr = sh_wdt_read_csr(); + csr &= ~WTCSR_TME; + csr |= WTCSR_CKS_4096; + sh_wdt_write_csr(csr); + csr = sh_wdt_read_csr(); + sh_wdt_write_cnt(0); + + /* disable PLL1 */ + frqcr = ctrl_inw(FRQCR); + frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY); + ctrl_outw(frqcr, FRQCR); + + /* enable standby */ + stbcr = ctrl_inb(STBCR); + ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR); + + /* set self-refresh */ + mcr = ctrl_inw(MCR); + ctrl_outw(mcr & ~MCR_RFSH, MCR); + + /* set interrupt handler */ + asm volatile("stc vbr, %0" : "=r" (vbr_old)); + vbr_new = get_zeroed_page(GFP_ATOMIC); + udelay(50); + memcpy((void*)(vbr_new + INTR_OFFSET), + &wakeup_start, &wakeup_end - &wakeup_start); + asm volatile("ldc %0, vbr" : : "r" (vbr_new)); + + ctrl_outw(0, RTCNT); + ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR); + + cpu_sleep(); + + asm volatile("ldc %0, vbr" : : "r" (vbr_old)); + + free_page(vbr_new); + + /* enable PLL1 */ + frqcr = ctrl_inw(FRQCR); + frqcr |= FRQCR_PSTBY; + ctrl_outw(frqcr, FRQCR); + udelay(50); + frqcr |= FRQCR_PLLEN; + ctrl_outw(frqcr, FRQCR); + + ctrl_outb(stbcr, STBCR); + + clear_bl_bit(); +} diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index f2031314cb2..0b1d5dd7a93 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -81,16 +81,6 @@ void cpu_idle(void) void machine_restart(char * __unused) { - -#ifdef CONFIG_KEXEC - struct kimage *image; - image = xchg(&kexec_image, 0); - if (image) { - machine_shutdown(); - machine_kexec(image); - } -#endif - /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */ asm volatile("ldc %0, sr\n\t" "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001)); @@ -263,6 +253,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, unsigned long unused, struct task_struct *p, struct pt_regs *regs) { + struct thread_info *ti = task_thread_info(p); struct pt_regs *childregs; #if defined(CONFIG_SH_FPU) struct task_struct *tsk = current; @@ -277,8 +268,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, if (user_mode(regs)) { childregs->regs[15] = usp; + ti->addr_limit = USER_DS; } else { childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE; + ti->addr_limit = KERNEL_DS; } if (clone_flags & CLONE_SETTLS) { childregs->gbr = childregs->regs[0]; @@ -299,13 +292,15 @@ ubc_set_tracing(int asid, unsigned long pc) { ctrl_outl(pc, UBC_BARA); +#ifdef CONFIG_MMU /* We don't have any ASID settings for the SH-2! */ if (cpu_data->type != CPU_SH7604) ctrl_outb(asid, UBC_BASRA); +#endif ctrl_outl(0, UBC_BAMRA); - if (cpu_data->type == CPU_SH7729) { + if (cpu_data->type == CPU_SH7729 || cpu_data->type == CPU_SH7710) { ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); } else { @@ -344,6 +339,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne } #endif +#ifdef CONFIG_MMU /* * Restore the kernel mode register * k7 (r7_bank1) @@ -351,19 +347,21 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne asm volatile("ldc %0, r7_bank" : /* no output */ : "r" (task_thread_info(next))); +#endif -#ifdef CONFIG_MMU /* If no tasks are using the UBC, we're done */ if (ubc_usercnt == 0) /* If no tasks are using the UBC, we're done */; else if (next->thread.ubc_pc && next->mm) { - ubc_set_tracing(next->mm->context & MMU_CONTEXT_ASID_MASK, - next->thread.ubc_pc); + int asid = 0; +#ifdef CONFIG_MMU + asid |= next->mm->context.id & MMU_CONTEXT_ASID_MASK; +#endif + ubc_set_tracing(asid, next->thread.ubc_pc); } else { ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); } -#endif return prev; } diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index f7eebbde329..04ca13a041c 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -224,7 +224,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_SETDSPREGS: { unsigned long dp; - int i; ret = -EIO; dp = ((unsigned long) child) + THREAD_SIZE - diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c index a3c24dcbf01..184119eeae5 100644 --- a/arch/sh/kernel/semaphore.c +++ b/arch/sh/kernel/semaphore.c @@ -14,7 +14,7 @@ #include <asm/semaphore.h> #include <asm/semaphore-helper.h> -spinlock_t semaphore_wake_lock; +DEFINE_SPINLOCK(semaphore_wake_lock); /* * Semaphores are implemented using a two-way counter: diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index e75189cb1db..5f587332234 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -43,27 +43,14 @@ extern void * __rd_start, * __rd_end; * The bigger value means no problem. */ struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; +#ifdef CONFIG_VT struct screen_info screen_info; +#endif #if defined(CONFIG_SH_UNKNOWN) struct sh_machine_vector sh_mv; #endif -/* We need this to satisfy some external references. */ -struct screen_info screen_info = { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0,0,0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - 0, /* orig-video-isVGA */ - 16 /* orig-video-points */ -}; - -extern void platform_setup(void); -extern char *get_system_type(void); extern int root_mountflags; #define MV_NAME_SIZE 32 @@ -90,29 +77,8 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name); static char command_line[COMMAND_LINE_SIZE] = { 0, }; -struct resource standard_io_resources[] = { - { "dma1", 0x00, 0x1f }, - { "pic1", 0x20, 0x3f }, - { "timer", 0x40, 0x5f }, - { "keyboard", 0x60, 0x6f }, - { "dma page reg", 0x80, 0x8f }, - { "pic2", 0xa0, 0xbf }, - { "dma2", 0xc0, 0xdf }, - { "fpu", 0xf0, 0xff } -}; - -#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource)) - -/* System RAM - interrupted by the 640kB-1M hole */ -#define code_resource (ram_resources[3]) -#define data_resource (ram_resources[4]) -static struct resource ram_resources[] = { - { "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY }, - { "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY }, - { "Video RAM area", 0x0a0000, 0x0bffff }, - { "Kernel code", 0x100000, 0 }, - { "Kernel data", 0, 0 } -}; +static struct resource code_resource = { .name = "Kernel code", }; +static struct resource data_resource = { .name = "Kernel data", }; unsigned long memory_start, memory_end; @@ -145,6 +111,24 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], memory_end = memory_start + mem_size; } } + +#ifdef CONFIG_EARLY_PRINTK + if (c == ' ' && !memcmp(from, "earlyprintk=", 12)) { + char *ep_end; + + if (to != command_line) + to--; + + from += 12; + ep_end = strchr(from, ' '); + + setup_early_printk(from); + printk("early console enabled\n"); + + from = ep_end; + } +#endif + if (c == ' ' && !memcmp(from, "sh_mv=", 6)) { char* mv_end; char* mv_comma; @@ -237,6 +221,9 @@ static int __init sh_mv_setup(char **cmdline_p) __set_io_port_base(mv_io_base); #endif + if (!sh_mv.mv_nr_irqs) + sh_mv.mv_nr_irqs = NR_IRQS; + return 0; } @@ -245,11 +232,6 @@ void __init setup_arch(char **cmdline_p) unsigned long bootmap_size; unsigned long start_pfn, max_pfn, max_low_pfn; -#ifdef CONFIG_EARLY_PRINTK - extern void enable_early_printk(void); - - enable_early_printk(); -#endif #ifdef CONFIG_CMDLINE_BOOL strcpy(COMMAND_LINE, CONFIG_CMDLINE); #endif @@ -368,14 +350,14 @@ void __init setup_arch(char **cmdline_p) #endif /* Perform the machine specific initialisation */ - platform_setup(); + if (likely(sh_mv.mv_setup)) + sh_mv.mv_setup(cmdline_p); paging_init(); } struct sh_machine_vector* __init get_mv_byname(const char* name) { - extern int strcasecmp(const char *, const char *); extern long __machvec_start, __machvec_end; struct sh_machine_vector *all_vecs = (struct sh_machine_vector *)&__machvec_start; @@ -410,25 +392,18 @@ static int __init topology_init(void) subsys_initcall(topology_init); static const char *cpu_name[] = { - [CPU_SH7604] = "SH7604", - [CPU_SH7705] = "SH7705", - [CPU_SH7708] = "SH7708", - [CPU_SH7729] = "SH7729", - [CPU_SH7300] = "SH7300", - [CPU_SH7750] = "SH7750", - [CPU_SH7750S] = "SH7750S", - [CPU_SH7750R] = "SH7750R", - [CPU_SH7751] = "SH7751", - [CPU_SH7751R] = "SH7751R", - [CPU_SH7760] = "SH7760", - [CPU_SH73180] = "SH73180", - [CPU_ST40RA] = "ST40RA", - [CPU_ST40GX1] = "ST40GX1", - [CPU_SH4_202] = "SH4-202", - [CPU_SH4_501] = "SH4-501", - [CPU_SH7770] = "SH7770", - [CPU_SH7780] = "SH7780", - [CPU_SH7781] = "SH7781", + [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300", + [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", + [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", + [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", + [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", + [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", + [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", + [CPU_SH7760] = "SH7760", [CPU_SH73180] = "SH73180", + [CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1", + [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", + [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", + [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH_NONE] = "Unknown" }; @@ -438,8 +413,10 @@ const char *get_cpu_subtype(void) } #ifdef CONFIG_PROC_FS +/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ static const char *cpu_flags[] = { - "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL + "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", + "ptea", "llsc", "l2", NULL }; static void show_cpuflags(struct seq_file *m) @@ -460,7 +437,8 @@ static void show_cpuflags(struct seq_file *m) seq_printf(m, "\n"); } -static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info) +static void show_cacheinfo(struct seq_file *m, const char *type, + struct cache_info info) { unsigned int cache_size; @@ -493,7 +471,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) * unified cache on the SH-2 and SH-3, as well as the harvard * style cache on the SH-4. */ - if (test_bit(SH_CACHE_COMBINED, &(boot_cpu_data.icache.flags))) { + if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) { seq_printf(m, "unified\n"); show_cacheinfo(m, "cache", boot_cpu_data.icache); } else { @@ -502,6 +480,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) show_cacheinfo(m, "dcache", boot_cpu_data.dcache); } + /* Optional secondary cache */ + if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) + show_cacheinfo(m, "scache", boot_cpu_data.scache); + seq_printf(m, "bogomips\t: %lu.%02lu\n", boot_cpu_data.loops_per_jiffy/(500000/HZ), (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); @@ -617,4 +599,3 @@ static int __init kgdb_parse_options(char *options) } __setup("kgdb=", kgdb_parse_options); #endif /* CONFIG_SH_KGDB */ - diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 245ed8f945e..d3cbfa2ad4a 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -27,21 +27,11 @@ EXPORT_SYMBOL(sh_mv); /* platform dependent support */ EXPORT_SYMBOL(dump_fpu); -EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(enable_irq); -EXPORT_SYMBOL(disable_irq); -EXPORT_SYMBOL(probe_irq_mask); EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(disable_irq_nosync); EXPORT_SYMBOL(irq_desc); EXPORT_SYMBOL(no_irq_type); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); /* PCI exports */ #ifdef CONFIG_PCI @@ -52,13 +42,8 @@ EXPORT_SYMBOL(pci_free_consistent); /* mem exports */ EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memcpy_fromio); -EXPORT_SYMBOL(memcpy_toio); EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memset_io); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(boot_cpu_data); @@ -94,7 +79,9 @@ EXPORT_SYMBOL(strcpy); DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); +#endif +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) /* needed by some modules */ EXPORT_SYMBOL(flush_cache_all); EXPORT_SYMBOL(flush_cache_range); @@ -102,11 +89,9 @@ EXPORT_SYMBOL(flush_dcache_page); EXPORT_SYMBOL(__flush_purge_region); #endif -#if defined(CONFIG_SH7705_CACHE_32KB) -EXPORT_SYMBOL(flush_cache_all); -EXPORT_SYMBOL(flush_cache_range); -EXPORT_SYMBOL(flush_dcache_page); -EXPORT_SYMBOL(__flush_purge_region); +#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +EXPORT_SYMBOL(clear_user_page); #endif EXPORT_SYMBOL(flush_tlb_page); @@ -116,7 +101,12 @@ EXPORT_SYMBOL(__down_trylock); EXPORT_SYMBOL(synchronize_irq); #endif +#ifdef CONFIG_PM +EXPORT_SYMBOL(pm_suspend); +#endif + EXPORT_SYMBOL(csum_partial); +#ifdef CONFIG_IPV6 EXPORT_SYMBOL(csum_ipv6_magic); -EXPORT_SYMBOL(consistent_sync); +#endif EXPORT_SYMBOL(clear_page); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index b475c4d2405..5213f5bc6ce 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -8,7 +8,6 @@ * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima * */ - #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> @@ -21,6 +20,7 @@ #include <linux/unistd.h> #include <linux/stddef.h> #include <linux/tty.h> +#include <linux/elf.h> #include <linux/personality.h> #include <linux/binfmts.h> @@ -29,12 +29,8 @@ #include <asm/pgtable.h> #include <asm/cacheflush.h> -#define DEBUG_SIG 0 - #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); - /* * Atomically swap in the new signal mask, and wait for a signal. */ @@ -43,51 +39,17 @@ sys_sigsuspend(old_sigset_t mask, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) { - sigset_t saveset; - mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; + current->saved_sigmask = current->blocked; siginitset(¤t->blocked, mask); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs.regs[0] = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(®s, &saveset)) - return -EINTR; - } -} - -asmlinkage int -sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, - unsigned long r6, unsigned long r7, - struct pt_regs regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs.regs[0] = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(®s, &saveset)) - return -EINTR; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } asmlinkage int @@ -348,7 +310,12 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) return (void __user *)((sp - frame_size) & -8ul); } -static void setup_frame(int sig, struct k_sigaction *ka, +/* These symbols are defined with the addresses in the vsyscall page. + See vsyscall-trapa.S. */ +extern void __user __kernel_sigreturn; +extern void __user __kernel_rt_sigreturn; + +static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regs) { struct sigframe __user *frame; @@ -368,15 +335,18 @@ static void setup_frame(int sig, struct k_sigaction *ka, err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); - if (_NSIG_WORDS > 1) { + if (_NSIG_WORDS > 1) err |= __copy_to_user(frame->extramask, &set->sig[1], sizeof(frame->extramask)); - } /* Set up to return from userspace. If provided, use a stub already in userspace. */ if (ka->sa.sa_flags & SA_RESTORER) { regs->pr = (unsigned long) ka->sa.sa_restorer; +#ifdef CONFIG_VSYSCALL + } else if (likely(current->mm->context.vdso)) { + regs->pr = VDSO_SYM(&__kernel_sigreturn); +#endif } else { /* Generate return code (system call to sigreturn) */ err |= __put_user(MOVW(7), &frame->retcode[0]); @@ -402,21 +372,22 @@ static void setup_frame(int sig, struct k_sigaction *ka, set_fs(USER_DS); -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", - current->comm, current->pid, frame, regs->pc, regs->pr); -#endif + pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", + current->comm, current->pid, frame, regs->pc, regs->pr); flush_cache_sigtramp(regs->pr); + if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); - return; + + return 0; give_sigsegv: force_sigsegv(sig, current); + return -EFAULT; } -static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; @@ -452,6 +423,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, already in userspace. */ if (ka->sa.sa_flags & SA_RESTORER) { regs->pr = (unsigned long) ka->sa.sa_restorer; +#ifdef CONFIG_VSYSCALL + } else if (likely(current->mm->context.vdso)) { + regs->pr = VDSO_SYM(&__kernel_rt_sigreturn); +#endif } else { /* Generate return code (system call to rt_sigreturn) */ err |= __put_user(MOVW(7), &frame->retcode[0]); @@ -477,28 +452,31 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, set_fs(USER_DS); -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", - current->comm, current->pid, frame, regs->pc, regs->pr); -#endif + pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", + current->comm, current->pid, frame, regs->pc, regs->pr); flush_cache_sigtramp(regs->pr); + if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); - return; + + return 0; give_sigsegv: force_sigsegv(sig, current); + return -EFAULT; } /* * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { + int ret; + /* Are we from a system call? */ if (regs->tra >= 0) { /* If so, check system call restarting.. */ @@ -539,19 +517,23 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, /* Set up the stack frame */ if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs); + ret = setup_rt_frame(sig, ka, info, oldset, regs); else - setup_frame(sig, ka, oldset, regs); + ret = setup_frame(sig, ka, oldset, regs); if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; } /* @@ -563,11 +545,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) +static void do_signal(struct pt_regs *regs, unsigned int save_r0) { siginfo_t info; int signr; struct k_sigaction ka; + sigset_t *oldset; /* * We want the common case to go fast, which @@ -576,19 +559,27 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) * if so. */ if (!user_mode(regs)) - return 1; + return; if (try_to_freeze()) goto no_signal; - if (!oldset) + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { /* Whee! Actually deliver the signal. */ - handle_signal(signr, &ka, &info, oldset, regs); - return 1; + if (handle_signal(signr, &ka, &info, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } } no_signal: @@ -597,10 +588,27 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) /* Restart the system call - no handlers present */ if (regs->regs[0] == -ERESTARTNOHAND || regs->regs[0] == -ERESTARTSYS || - regs->regs[0] == -ERESTARTNOINTR || - regs->regs[0] == -ERESTART_RESTARTBLOCK) { + regs->regs[0] == -ERESTARTNOINTR) { + regs->regs[0] = save_r0; + regs->pc -= 2; + } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) { regs->pc -= 2; + regs->regs[3] = __NR_restart_syscall; } } - return 0; + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } +} + +asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, + __u32 thread_info_flags) +{ + /* deal with pending signal delivery */ + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs, save_r0); } diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 917b2f32f26..b68ff705f06 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -21,7 +21,8 @@ #include <linux/mman.h> #include <linux/file.h> #include <linux/utsname.h> - +#include <linux/module.h> +#include <asm/cacheflush.h> #include <asm/uaccess.h> #include <asm/ipc.h> @@ -44,11 +45,16 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, return error; } -#if defined(HAVE_ARCH_UNMAPPED_AREA) +unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ + +EXPORT_SYMBOL(shm_align_mask); + /* - * To avoid cache alias, we map the shard page with same color. + * To avoid cache aliases, we map the shared page with same color. */ -#define COLOUR_ALIGN(addr) (((addr)+SHMLBA-1)&~(SHMLBA-1)) +#define COLOUR_ALIGN(addr, pgoff) \ + ((((addr) + shm_align_mask) & ~shm_align_mask) + \ + (((pgoff) << PAGE_SHIFT) & shm_align_mask)) unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) @@ -56,43 +62,52 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, struct mm_struct *mm = current->mm; struct vm_area_struct *vma; unsigned long start_addr; + int do_colour_align; if (flags & MAP_FIXED) { /* We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1))) + if ((flags & MAP_SHARED) && (addr & shm_align_mask)) return -EINVAL; return addr; } - if (len > TASK_SIZE) + if (unlikely(len > TASK_SIZE)) return -ENOMEM; + do_colour_align = 0; + if (filp || (flags & MAP_SHARED)) + do_colour_align = 1; + if (addr) { - if (flags & MAP_PRIVATE) - addr = PAGE_ALIGN(addr); + if (do_colour_align) + addr = COLOUR_ALIGN(addr, pgoff); else - addr = COLOUR_ALIGN(addr); + addr = PAGE_ALIGN(addr); + vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && (!vma || addr + len <= vma->vm_start)) return addr; } - if (len <= mm->cached_hole_size) { + + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { mm->cached_hole_size = 0; - mm->free_area_cache = TASK_UNMAPPED_BASE; + start_addr = addr = TASK_UNMAPPED_BASE; } - if (flags & MAP_PRIVATE) - addr = PAGE_ALIGN(mm->free_area_cache); - else - addr = COLOUR_ALIGN(mm->free_area_cache); - start_addr = addr; full_search: + if (do_colour_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(mm->free_area_cache); + for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { + if (unlikely(TASK_SIZE - len < addr)) { /* * Start a new search - just in case we missed * some holes. @@ -104,7 +119,7 @@ full_search: } return -ENOMEM; } - if (!vma || addr + len <= vma->vm_start) { + if (likely(!vma || addr + len <= vma->vm_start)) { /* * Remember the place where we stopped the search: */ @@ -115,11 +130,10 @@ full_search: mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; - if (!(flags & MAP_PRIVATE)) - addr = COLOUR_ALIGN(addr); + if (do_colour_align) + addr = COLOUR_ALIGN(addr, pgoff); } } -#endif static inline long do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S new file mode 100644 index 00000000000..768334e9507 --- /dev/null +++ b/arch/sh/kernel/syscalls.S @@ -0,0 +1,353 @@ +/* + * arch/sh/kernel/syscalls.S + * + * System call table for SuperH + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/sys.h> +#include <linux/linkage.h> + +#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) +#define sys_nfsservctl sys_ni_syscall +#endif + +#if !defined(CONFIG_MMU) +#define sys_madvise sys_ni_syscall +#define sys_readahead sys_ni_syscall +#define sys_mprotect sys_ni_syscall +#define sys_msync sys_ni_syscall +#define sys_mlock sys_ni_syscall +#define sys_munlock sys_ni_syscall +#define sys_mlockall sys_ni_syscall +#define sys_munlockall sys_ni_syscall +#define sys_mremap sys_ni_syscall +#define sys_mincore sys_ni_syscall +#define sys_remap_file_pages sys_ni_syscall +#endif + + .data +ENTRY(sys_call_table) + .long sys_restart_syscall /* 0 - old "setup()" system call*/ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* sys_olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_ni_syscall /* sys_oldselect */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_uname + .long sys_ni_syscall /* 110 */ /* iopl */ + .long sys_vhangup + .long sys_ni_syscall /* idle */ + .long sys_ni_syscall /* vm86old */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* vm86 */ + .long sys_ni_syscall /* old "query_module" */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread_wrapper /* 180 */ + .long sys_pwrite_wrapper + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall /* Reserved for Security */ + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall + .long sys_ni_syscall + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64_wrapper + .long sys_ni_syscall /* Reserved for vserver */ + .long sys_ni_syscall /* Reserved for mbind */ + .long sys_ni_syscall /* 275 - get_mempolicy */ + .long sys_ni_syscall /* set_mempolicy */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_kexec_load + .long sys_waitid + .long sys_ni_syscall /* 285 */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index a1589f85499..149d9713edd 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -3,13 +3,12 @@ * * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt + * Copyright (C) 2002 - 2006 Paul Mundt * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> * * Some code taken from i386 version. * Copyright (C) 1991, 1992, 1995 Linus Torvalds */ - #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -26,15 +25,20 @@ struct sys_timer *sys_timer; DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want - * these routines anywhere... */ -#ifdef CONFIG_SH_RTC -void (*rtc_get_time)(struct timespec *) = sh_rtc_gettimeofday; -int (*rtc_set_time)(const time_t) = sh_rtc_settimeofday; -#else -void (*rtc_get_time)(struct timespec *); -int (*rtc_set_time)(const time_t); -#endif +/* Dummy RTC ops */ +static void null_rtc_get_time(struct timespec *tv) +{ + tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0); + tv->tv_nsec = 0; +} + +static int null_rtc_set_time(const time_t secs) +{ + return 0; +} + +void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; +int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; /* * Scheduler clock - returns current time in nanosec units. @@ -70,7 +74,6 @@ void do_gettimeofday(struct timeval *tv) tv->tv_sec = sec; tv->tv_usec = usec; } - EXPORT_SYMBOL(do_gettimeofday); int do_settimeofday(struct timespec *tv) @@ -103,7 +106,6 @@ int do_settimeofday(struct timespec *tv) return 0; } - EXPORT_SYMBOL(do_settimeofday); /* last time the RTC clock got updated */ @@ -135,7 +137,7 @@ void handle_timer_tick(struct pt_regs *regs) xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_set_time(xtime.tv_sec) == 0) + if (rtc_sh_set_time(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else /* do it again in 60s */ @@ -143,8 +145,33 @@ void handle_timer_tick(struct pt_regs *regs) } } +#ifdef CONFIG_PM +int timer_suspend(struct sys_device *dev, pm_message_t state) +{ + struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); + + sys_timer->ops->stop(); + + return 0; +} + +int timer_resume(struct sys_device *dev) +{ + struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); + + sys_timer->ops->start(); + + return 0; +} +#else +#define timer_suspend NULL +#define timer_resume NULL +#endif + static struct sysdev_class timer_sysclass = { set_kset_name("timer"), + .suspend = timer_suspend, + .resume = timer_resume, }; static int __init timer_init_sysfs(void) @@ -156,7 +183,6 @@ static int __init timer_init_sysfs(void) sys_timer->dev.cls = &timer_sysclass; return sysdev_register(&sys_timer->dev); } - device_initcall(timer_init_sysfs); void (*board_time_init)(void); @@ -168,15 +194,9 @@ void __init time_init(void) clk_init(); - if (rtc_get_time) { - rtc_get_time(&xtime); - } else { - xtime.tv_sec = mktime(2000, 1, 1, 0, 0, 0); - xtime.tv_nsec = 0; - } - - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); + rtc_sh_get_time(&xtime); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); /* * Find the timer to use as the system timer, it will be diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index d4212add53b..205816fcf0d 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -132,17 +132,17 @@ static unsigned long tmu_timer_get_frequency(void) ctrl_outl(0xffffffff, TMU0_TCOR); ctrl_outl(0xffffffff, TMU0_TCNT); - rtc_get_time(&ts2); + rtc_sh_get_time(&ts2); do { - rtc_get_time(&ts1); + rtc_sh_get_time(&ts1); } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); /* actually start the timer */ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); do { - rtc_get_time(&ts2); + rtc_sh_get_time(&ts2); } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); freq = 0xffffffff - ctrl_inl(TMU0_TCNT); @@ -188,6 +188,18 @@ static struct clk tmu0_clk = { .ops = &tmu_clk_ops, }; +static int tmu_timer_start(void) +{ + ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + return 0; +} + +static int tmu_timer_stop(void) +{ + ctrl_outb(0, TMU_TSTR); + return 0; +} + static int tmu_timer_init(void) { unsigned long interval; @@ -197,7 +209,7 @@ static int tmu_timer_init(void) tmu0_clk.parent = clk_get("module_clk"); /* Start TMU0 */ - ctrl_outb(0, TMU_TSTR); + tmu_timer_stop(); #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif @@ -211,13 +223,15 @@ static int tmu_timer_init(void) ctrl_outl(interval, TMU0_TCOR); ctrl_outl(interval, TMU0_TCNT); - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + tmu_timer_start(); return 0; } struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, + .start = tmu_timer_start, + .stop = tmu_timer_stop, .get_frequency = tmu_timer_get_frequency, .get_offset = tmu_timer_get_offset, }; diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index d9db1180f77..c2c597e0948 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -36,40 +36,15 @@ #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> -#define CHK_REMOTE_DEBUG(regs) \ -{ \ - if ((kgdb_debug_hook != (kgdb_debug_hook_t *) NULL) && (!user_mode(regs))) \ - { \ - (*kgdb_debug_hook)(regs); \ - } \ +#define CHK_REMOTE_DEBUG(regs) \ +{ \ + if (kgdb_debug_hook && !user_mode(regs))\ + (*kgdb_debug_hook)(regs); \ } #else #define CHK_REMOTE_DEBUG(regs) #endif -#define DO_ERROR(trapnr, signr, str, name, tsk) \ -asmlinkage void do_##name(unsigned long r4, unsigned long r5, \ - unsigned long r6, unsigned long r7, \ - struct pt_regs regs) \ -{ \ - unsigned long error_code; \ - \ - /* Check if it's a DSP instruction */ \ - if (is_dsp_inst(®s)) { \ - /* Enable DSP mode, and restart instruction. */ \ - regs.sr |= SR_DSP; \ - return; \ - } \ - \ - asm volatile("stc r2_bank, %0": "=r" (error_code)); \ - local_irq_enable(); \ - tsk->thread.error_code = error_code; \ - tsk->thread.trap_no = trapnr; \ - CHK_REMOTE_DEBUG(®s); \ - force_sig(signr, tsk); \ - die_if_no_fixup(str,®s,error_code); \ -} - #ifdef CONFIG_CPU_SH2 #define TRAP_RESERVED_INST 4 #define TRAP_ILLEGAL_SLOT_INST 6 @@ -86,7 +61,7 @@ asmlinkage void do_##name(unsigned long r4, unsigned long r5, \ #define VMALLOC_OFFSET (8*1024*1024) #define MODULE_RANGE (8*1024*1024) -spinlock_t die_lock; +DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { @@ -575,8 +550,117 @@ int is_dsp_inst(struct pt_regs *regs) #define is_dsp_inst(regs) (0) #endif /* CONFIG_SH_DSP */ -DO_ERROR(TRAP_RESERVED_INST, SIGILL, "reserved instruction", reserved_inst, current) -DO_ERROR(TRAP_ILLEGAL_SLOT_INST, SIGILL, "illegal slot instruction", illegal_slot_inst, current) +extern int do_fpu_inst(unsigned short, struct pt_regs*); + +asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + unsigned long error_code; + struct task_struct *tsk = current; + +#ifdef CONFIG_SH_FPU_EMU + unsigned short inst; + int err; + + get_user(inst, (unsigned short*)regs.pc); + + err = do_fpu_inst(inst, ®s); + if (!err) { + regs.pc += 2; + return; + } + /* not a FPU inst. */ +#endif + +#ifdef CONFIG_SH_DSP + /* Check if it's a DSP instruction */ + if (is_dsp_inst(®s)) { + /* Enable DSP mode, and restart instruction. */ + regs.sr |= SR_DSP; + return; + } +#endif + + asm volatile("stc r2_bank, %0": "=r" (error_code)); + local_irq_enable(); + tsk->thread.error_code = error_code; + tsk->thread.trap_no = TRAP_RESERVED_INST; + CHK_REMOTE_DEBUG(®s); + force_sig(SIGILL, tsk); + die_if_no_fixup("reserved instruction", ®s, error_code); +} + +#ifdef CONFIG_SH_FPU_EMU +static int emulate_branch(unsigned short inst, struct pt_regs* regs) +{ + /* + * bfs: 8fxx: PC+=d*2+4; + * bts: 8dxx: PC+=d*2+4; + * bra: axxx: PC+=D*2+4; + * bsr: bxxx: PC+=D*2+4 after PR=PC+4; + * braf:0x23: PC+=Rn*2+4; + * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4; + * jmp: 4x2b: PC=Rn; + * jsr: 4x0b: PC=Rn after PR=PC+4; + * rts: 000b: PC=PR; + */ + if ((inst & 0xfd00) == 0x8d00) { + regs->pc += SH_PC_8BIT_OFFSET(inst); + return 0; + } + + if ((inst & 0xe000) == 0xa000) { + regs->pc += SH_PC_12BIT_OFFSET(inst); + return 0; + } + + if ((inst & 0xf0df) == 0x0003) { + regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4; + return 0; + } + + if ((inst & 0xf0df) == 0x400b) { + regs->pc = regs->regs[(inst & 0x0f00) >> 8]; + return 0; + } + + if ((inst & 0xffff) == 0x000b) { + regs->pc = regs->pr; + return 0; + } + + return 1; +} +#endif + +asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + unsigned long error_code; + struct task_struct *tsk = current; +#ifdef CONFIG_SH_FPU_EMU + unsigned short inst; + + get_user(inst, (unsigned short *)regs.pc + 1); + if (!do_fpu_inst(inst, ®s)) { + get_user(inst, (unsigned short *)regs.pc); + if (!emulate_branch(inst, ®s)) + return; + /* fault in branch.*/ + } + /* not a FPU inst. */ +#endif + + asm volatile("stc r2_bank, %0": "=r" (error_code)); + local_irq_enable(); + tsk->thread.error_code = error_code; + tsk->thread.trap_no = TRAP_RESERVED_INST; + CHK_REMOTE_DEBUG(®s); + force_sig(SIGILL, tsk); + die_if_no_fixup("illegal slot instruction", ®s, error_code); +} asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, @@ -634,14 +718,16 @@ void __init trap_init(void) exception_handling_table[TRAP_ILLEGAL_SLOT_INST] = (void *)do_illegal_slot_inst; -#ifdef CONFIG_CPU_SH4 - if (!(cpu_data->flags & CPU_HAS_FPU)) { - /* For SH-4 lacking an FPU, treat floating point instructions - as reserved. */ - /* entry 64 corresponds to EXPEVT=0x800 */ - exception_handling_table[64] = (void *)do_reserved_inst; - exception_handling_table[65] = (void *)do_illegal_slot_inst; - } +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \ + defined(CONFIG_SH_FPU_EMU) + /* + * For SH-4 lacking an FPU, treat floating point instructions as + * reserved. They'll be handled in the math-emu case, or faulted on + * otherwise. + */ + /* entry 64 corresponds to EXPEVT=0x800 */ + exception_handling_table[64] = (void *)do_reserved_inst; + exception_handling_table[65] = (void *)do_illegal_slot_inst; #endif /* Setup VBR for boot cpu */ @@ -655,20 +741,12 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) unsigned long module_end = VMALLOC_END; int i = 1; - if (tsk && !sp) { + if (!tsk) + tsk = current; + if (tsk == current) + sp = (unsigned long *)current_stack_pointer; + else sp = (unsigned long *)tsk->thread.sp; - } - - if (!sp) { - __asm__ __volatile__ ( - "mov r15, %0\n\t" - "stc r7_bank, %1\n\t" - : "=r" (module_start), - "=r" (module_end) - ); - - sp = (unsigned long *)module_start; - } stack = sp; diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 95fdd9135fc..5eb93091818 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -2,6 +2,7 @@ * ld script to make SuperH Linux kernel * Written by Niibe Yutaka */ +#include <asm/thread_info.h> #include <asm-generic/vmlinux.lds.h> #ifdef CONFIG_CPU_LITTLE_ENDIAN @@ -13,7 +14,7 @@ OUTPUT_ARCH(sh) ENTRY(_start) SECTIONS { - . = 0x80000000 + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; + . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; _text = .; /* Text and read-only data */ text = .; /* Text and read-only data */ .empty_zero_page : { @@ -40,16 +41,16 @@ SECTIONS *(.data) /* Align the initial ramdisk image (INITRD) on page boundaries. */ - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __rd_start = .; *(.initrd) - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __rd_end = .; CONSTRUCTORS } - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); .data.page_aligned : { *(.data.idt) } . = ALIGN(32); @@ -60,12 +61,10 @@ SECTIONS _edata = .; /* End of data section */ - . = ALIGN(8192); /* init_task */ + . = ALIGN(THREAD_SIZE); /* init_task */ .data.init_task : { *(.data.init_task) } - /* stack */ - .stack : { stack = .; _stack = .; } - . = ALIGN(4096); /* Init code and data */ + . = ALIGN(PAGE_SIZE); /* Init code and data */ __init_begin = .; _sinittext = .; .init.text : { *(.init.text) } @@ -96,7 +95,7 @@ SECTIONS __machvec_start = .; .init.machvec : { *(.init.machvec) } __machvec_end = .; - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; . = ALIGN(4); diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile new file mode 100644 index 00000000000..4bbce1cfa35 --- /dev/null +++ b/arch/sh/kernel/vsyscall/Makefile @@ -0,0 +1,36 @@ +obj-y += vsyscall.o vsyscall-syscall.o + +$(obj)/vsyscall-syscall.o: \ + $(foreach F,trapa,$(obj)/vsyscall-$F.so) + +# Teach kbuild about targets +targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so) +targets += vsyscall-note.o vsyscall.lds + +# The DSO images are built using a special linker script +quiet_cmd_syscall = SYSCALL $@ + cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \ + -Wl,-T,$(filter-out FORCE,$^) -o $@ + +export CPPFLAGS_vsyscall.lds += -P -C -Ush + +vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) + +SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags) + +$(obj)/vsyscall-trapa.so: \ +$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE + $(call if_changed,syscall) + +# We also create a special relocatable object that should mirror the symbol +# table and layout of the linked DSO. With ld -R we can then refer to +# these symbols in the kernel code rather than hand-coded addresses. +extra-y += vsyscall-syms.o +$(obj)/built-in.o: $(obj)/vsyscall-syms.o +$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o + +SYSCFLAGS_vsyscall-syms.o = -r +$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \ + $(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE + $(call if_changed,syscall) diff --git a/arch/sh/kernel/vsyscall/vsyscall-note.S b/arch/sh/kernel/vsyscall/vsyscall-note.S new file mode 100644 index 00000000000..d4b5be4f3d5 --- /dev/null +++ b/arch/sh/kernel/vsyscall/vsyscall-note.S @@ -0,0 +1,25 @@ +/* + * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. + * Here we can supply some information useful to userland. + */ + +#include <linux/uts.h> +#include <linux/version.h> + +#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \ + .section name, flags; \ + .balign 4; \ + .long 1f - 0f; /* name length */ \ + .long 3f - 2f; /* data length */ \ + .long type; /* note type */ \ +0: .asciz vendor; /* vendor name */ \ +1: .balign 4; \ +2: + +#define ASM_ELF_NOTE_END \ +3: .balign 4; /* pad out section */ \ + .previous + + ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0) + .long LINUX_VERSION_CODE + ASM_ELF_NOTE_END diff --git a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S new file mode 100644 index 00000000000..555a64f124c --- /dev/null +++ b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S @@ -0,0 +1,39 @@ +#include <asm/unistd.h> + + .text + .balign 32 + .globl __kernel_sigreturn + .type __kernel_sigreturn,@function +__kernel_sigreturn: +.LSTART_sigreturn: + mov.w 1f, r3 + trapa #0x10 + or r0, r0 + or r0, r0 + or r0, r0 + or r0, r0 + or r0, r0 + +1: .short __NR_sigreturn +.LEND_sigreturn: + .size __kernel_sigreturn,.-.LSTART_sigreturn + + .balign 32 + .globl __kernel_rt_sigreturn + .type __kernel_rt_sigreturn,@function +__kernel_rt_sigreturn: +.LSTART_rt_sigreturn: + mov.w 1f, r3 + trapa #0x10 + or r0, r0 + or r0, r0 + or r0, r0 + or r0, r0 + or r0, r0 + +1: .short __NR_rt_sigreturn +.LEND_rt_sigreturn: + .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn + + .section .eh_frame,"a",@progbits + .previous diff --git a/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/arch/sh/kernel/vsyscall/vsyscall-syscall.S new file mode 100644 index 00000000000..c2ac7f0282b --- /dev/null +++ b/arch/sh/kernel/vsyscall/vsyscall-syscall.S @@ -0,0 +1,10 @@ +#include <linux/init.h> + +__INITDATA + + .globl vsyscall_trapa_start, vsyscall_trapa_end +vsyscall_trapa_start: + .incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so" +vsyscall_trapa_end: + +__FINIT diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S new file mode 100644 index 00000000000..3b6eb34c43f --- /dev/null +++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S @@ -0,0 +1,42 @@ + .text + .globl __kernel_vsyscall + .type __kernel_vsyscall,@function +__kernel_vsyscall: +.LSTART_vsyscall: + /* XXX: We'll have to do something here once we opt to use the vDSO + * page for something other than the signal trampoline.. as well as + * fill out .eh_frame -- PFM. */ +.LEND_vsyscall: + .size __kernel_vsyscall,.-.LSTART_vsyscall + .previous + + .section .eh_frame,"a",@progbits +.LCIE: + .ualong .LCIE_end - .LCIE_start +.LCIE_start: + .ualong 0 /* CIE ID */ + .byte 0x1 /* Version number */ + .string "zRS" /* NUL-terminated augmentation string */ + .uleb128 0x1 /* Code alignment factor */ + .sleb128 -4 /* Data alignment factor */ + .byte 0x11 /* Return address register column */ + /* Augmentation length and data (none) */ + .byte 0xc /* DW_CFA_def_cfa */ + .uleb128 0xf /* r15 */ + .uleb128 0x0 /* offset 0 */ + + .align 2 +.LCIE_end: + + .ualong .LFDE_end-.LFDE_start /* Length FDE */ +.LFDE_start: + .ualong .LCIE /* CIE pointer */ + .ualong .LSTART_vsyscall-. /* start address */ + .ualong .LEND_vsyscall-.LSTART_vsyscall + .uleb128 0 + .align 2 +.LFDE_end: + .previous + +/* Get the common code for the sigreturn entry points */ +#include "vsyscall-sigreturn.S" diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c new file mode 100644 index 00000000000..075d6cc1a2d --- /dev/null +++ b/arch/sh/kernel/vsyscall/vsyscall.c @@ -0,0 +1,150 @@ +/* + * arch/sh/kernel/vsyscall.c + * + * Copyright (C) 2006 Paul Mundt + * + * vDSO randomization + * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gfp.h> +#include <linux/module.h> +#include <linux/elf.h> + +/* + * Should the kernel map a VDSO page into processes and pass its + * address down to glibc upon exec()? + */ +unsigned int __read_mostly vdso_enabled = 1; +EXPORT_SYMBOL_GPL(vdso_enabled); + +static int __init vdso_setup(char *s) +{ + vdso_enabled = simple_strtoul(s, NULL, 0); + return 1; +} +__setup("vdso=", vdso_setup); + +/* + * These symbols are defined by vsyscall.o to mark the bounds + * of the ELF DSO images included therein. + */ +extern const char vsyscall_trapa_start, vsyscall_trapa_end; +static void *syscall_page; + +int __init vsyscall_init(void) +{ + syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); + + /* + * XXX: Map this page to a fixmap entry if we get around + * to adding the page to ELF core dumps + */ + + memcpy(syscall_page, + &vsyscall_trapa_start, + &vsyscall_trapa_end - &vsyscall_trapa_start); + + return 0; +} + +static struct page *syscall_vma_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + unsigned long offset = address - vma->vm_start; + struct page *page; + + if (address < vma->vm_start || address > vma->vm_end) + return NOPAGE_SIGBUS; + + page = virt_to_page(syscall_page + offset); + + get_page(page); + + return page; +} + +/* Prevent VMA merging */ +static void syscall_vma_close(struct vm_area_struct *vma) +{ +} + +static struct vm_operations_struct syscall_vm_ops = { + .nopage = syscall_vma_nopage, + .close = syscall_vma_close, +}; + +/* Setup a VMA at program startup for the vsyscall page */ +int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr; + int ret; + + down_write(&mm->mmap_sem); + addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + vma = kmem_cache_zalloc(vm_area_cachep, SLAB_KERNEL); + if (!vma) { + ret = -ENOMEM; + goto up_fail; + } + + vma->vm_start = addr; + vma->vm_end = addr + PAGE_SIZE; + /* MAYWRITE to allow gdb to COW and set breakpoints */ + vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; + vma->vm_flags |= mm->def_flags; + vma->vm_page_prot = protection_map[vma->vm_flags & 7]; + vma->vm_ops = &syscall_vm_ops; + vma->vm_mm = mm; + + ret = insert_vm_struct(mm, vma); + if (unlikely(ret)) { + kmem_cache_free(vm_area_cachep, vma); + goto up_fail; + } + + current->mm->context.vdso = (void *)addr; + + mm->total_vm++; +up_fail: + up_write(&mm->mmap_sem); + return ret; +} + +const char *arch_vma_name(struct vm_area_struct *vma) +{ + if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) + return "[vdso]"; + + return NULL; +} + +struct vm_area_struct *get_gate_vma(struct task_struct *task) +{ + return NULL; +} + +int in_gate_area(struct task_struct *task, unsigned long address) +{ + return 0; +} + +int in_gate_area_no_task(unsigned long address) +{ + return 0; +} diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S new file mode 100644 index 00000000000..b13c3d439fe --- /dev/null +++ b/arch/sh/kernel/vsyscall/vsyscall.lds.S @@ -0,0 +1,74 @@ +/* + * Linker script for vsyscall DSO. The vsyscall page is an ELF shared + * object prelinked to its virtual address, and with only one read-only + * segment (that fits in one page). This script controls its layout. + */ +#include <asm/asm-offsets.h> + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#else +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") +#endif +OUTPUT_ARCH(sh) + +/* The ELF entry point can be used to set the AT_SYSINFO value. */ +ENTRY(__kernel_vsyscall); + +SECTIONS +{ + . = SIZEOF_HEADERS; + + .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + + /* This linker script is used both with -r and with -shared. + For the layouts to match, we need to skip more than enough + space for the dynamic symbol table et al. If this amount + is insufficient, ld -shared will barf. Just increase it here. */ + . = 0x400; + + .text : { *(.text) } :text =0x90909090 + .note : { *(.note.*) } :text :note + .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr + .eh_frame : { KEEP (*(.eh_frame)) } :text + .dynamic : { *(.dynamic) } :text :dynamic + .useless : { + *(.got.plt) *(.got) + *(.data .data.* .gnu.linkonce.d.*) + *(.dynbss) + *(.bss .bss.* .gnu.linkonce.b.*) + } :text +} + +/* + * We must supply the ELF program headers explicitly to get just one + * PT_LOAD segment, and set the flags explicitly to make segments read-only. + */ +PHDRS +{ + text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */ + dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ + note PT_NOTE FLAGS(4); /* PF_R */ + eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */ +} + +/* + * This controls what symbols we export from the DSO. + */ +VERSION +{ + LINUX_2.6 { + global: + __kernel_vsyscall; + __kernel_sigreturn; + __kernel_rt_sigreturn; + + local: *; + }; +} diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S index 7c50dfe68c0..cbdd0d40e54 100644 --- a/arch/sh/lib/checksum.S +++ b/arch/sh/lib/checksum.S @@ -202,8 +202,9 @@ ENTRY(csum_partial_copy_generic) cmp/pz r6 ! Jump if we had at least two bytes. bt/s 1f clrt + add #2,r6 ! r6 was < 2. Deal with it. bra 4f - add #2,r6 ! r6 was < 2. Deal with it. + mov r6,r2 3: ! Handle different src and dest alignments. ! This is not common, so simple byte by byte copy will do. diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S index db6b736537a..560bc17eebd 100644 --- a/arch/sh/lib/memcpy-sh4.S +++ b/arch/sh/lib/memcpy-sh4.S @@ -727,8 +727,8 @@ ENTRY(memcpy) mov.l @(0x04,r5), r11 ! 18 LS (latency=2) xtrct r9, r8 ! 48 EX - mov.w @(0x02,r5), r12 ! 18 LS (latency=2) - xtrct r10, r9 ! 48 EX + mov.l @(0x00,r5), r12 ! 18 LS (latency=2) + xtrct r10, r9 ! 48 EX movca.l r0,@r1 ! 40 LS (latency=3-7) add #-0x1c, r1 ! 50 EX diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S index 95670090680..af91fe2b72a 100644 --- a/arch/sh/lib/memset.S +++ b/arch/sh/lib/memset.S @@ -29,6 +29,7 @@ ENTRY(memset) bf/s 1b mov.b r5,@-r4 2: ! make VVVV + extu.b r5,r5 swap.b r5,r0 ! V0 or r0,r5 ! VV swap.w r5,r0 ! VV00 diff --git a/arch/sh/math-emu/Makefile b/arch/sh/math-emu/Makefile new file mode 100644 index 00000000000..638b342c781 --- /dev/null +++ b/arch/sh/math-emu/Makefile @@ -0,0 +1 @@ +obj-y := math.o diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c new file mode 100644 index 00000000000..26b6046814f --- /dev/null +++ b/arch/sh/math-emu/math.c @@ -0,0 +1,624 @@ +/* + * arch/sh/math-emu/math.c + * + * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/signal.h> + +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/io.h> + +#include "sfp-util.h" +#include <math-emu/soft-fp.h> +#include <math-emu/single.h> +#include <math-emu/double.h> + +#define FPUL (fregs->fpul) +#define FPSCR (fregs->fpscr) +#define FPSCR_RM (FPSCR&3) +#define FPSCR_DN ((FPSCR>>18)&1) +#define FPSCR_PR ((FPSCR>>19)&1) +#define FPSCR_SZ ((FPSCR>>20)&1) +#define FPSCR_FR ((FPSCR>>21)&1) +#define FPSCR_MASK 0x003fffffUL + +#define BANK(n) (n^(FPSCR_FR?16:0)) +#define FR ((unsigned long*)(fregs->fp_regs)) +#define FR0 (FR[BANK(0)]) +#define FRn (FR[BANK(n)]) +#define FRm (FR[BANK(m)]) +#define DR ((unsigned long long*)(fregs->fp_regs)) +#define DRn (DR[BANK(n)/2]) +#define DRm (DR[BANK(m)/2]) + +#define XREG(n) (n^16) +#define XFn (FR[BANK(XREG(n))]) +#define XFm (FR[BANK(XREG(m))]) +#define XDn (DR[BANK(XREG(n))/2]) +#define XDm (DR[BANK(XREG(m))/2]) + +#define R0 (regs->regs[0]) +#define Rn (regs->regs[n]) +#define Rm (regs->regs[m]) + +#define WRITE(d,a) ({if(put_user(d, (typeof (d)*)a)) return -EFAULT;}) +#define READ(d,a) ({if(get_user(d, (typeof (d)*)a)) return -EFAULT;}) + +#define PACK_S(r,f) FP_PACK_SP(&r,f) +#define UNPACK_S(f,r) FP_UNPACK_SP(f,&r) +#define PACK_D(r,f) \ + {u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];} +#define UNPACK_D(f,r) \ + {u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);} + +// 2 args instructions. +#define BOTH_PRmn(op,x) \ + FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn); + +#define CMP_X(SZ,R,M,N) do{ \ + FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \ + UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \ + FP_CMP_##SZ(R, Fn, Fm, 2); }while(0) +#define EQ_X(SZ,R,M,N) do{ \ + FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \ + UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \ + FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0) +#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; }) + +static int +fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + if (CMP(CMP) > 0) + regs->sr |= 1; + else + regs->sr &= ~1; + + return 0; +} + +static int +fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + if (CMP(CMP /*EQ*/) == 0) + regs->sr |= 1; + else + regs->sr &= ~1; + return 0; +} + +#define ARITH_X(SZ,OP,M,N) do{ \ + FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \ + UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \ + FP_##OP##_##SZ(Fr, Fn, Fm); \ + PACK_##SZ(N, Fr); }while(0) + +static int +fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + BOTH_PRmn(ARITH_X, ADD); + return 0; +} + +static int +fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + BOTH_PRmn(ARITH_X, SUB); + return 0; +} + +static int +fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + BOTH_PRmn(ARITH_X, MUL); + return 0; +} + +static int +fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + BOTH_PRmn(ARITH_X, DIV); + return 0; +} + +static int +fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + FP_DECL_EX; + FP_DECL_S(Fr); + FP_DECL_S(Ft); + FP_DECL_S(F0); + FP_DECL_S(Fm); + FP_DECL_S(Fn); + UNPACK_S(F0, FR0); + UNPACK_S(Fm, FRm); + UNPACK_S(Fn, FRn); + FP_MUL_S(Ft, Fm, F0); + FP_ADD_S(Fr, Fn, Ft); + PACK_S(FRn, Fr); + return 0; +} + +// to process fmov's extention (odd n for DR access XD). +#define FMOV_EXT(x) if(x&1) x+=16-1 + +static int +fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(n); + READ(FRn, Rm + R0 + 4); + n++; + READ(FRn, Rm + R0); + } else { + READ(FRn, Rm + R0); + } + + return 0; +} + +static int +fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(n); + READ(FRn, Rm + 4); + n++; + READ(FRn, Rm); + } else { + READ(FRn, Rm); + } + + return 0; +} + +static int +fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(n); + READ(FRn, Rm + 4); + n++; + READ(FRn, Rm); + Rm += 8; + } else { + READ(FRn, Rm); + Rm += 4; + } + + return 0; +} + +static int +fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(m); + WRITE(FRm, Rn + R0 + 4); + m++; + WRITE(FRm, Rn + R0); + } else { + WRITE(FRm, Rn + R0); + } + + return 0; +} + +static int +fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(m); + WRITE(FRm, Rn + 4); + m++; + WRITE(FRm, Rn); + } else { + WRITE(FRm, Rn); + } + + return 0; +} + +static int +fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(m); + Rn -= 8; + WRITE(FRm, Rn + 4); + m++; + WRITE(FRm, Rn); + } else { + Rn -= 4; + WRITE(FRm, Rn); + } + + return 0; +} + +static int +fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, + int n) +{ + if (FPSCR_SZ) { + FMOV_EXT(m); + FMOV_EXT(n); + DRn = DRm; + } else { + FRn = FRm; + } + + return 0; +} + +static int +fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) +{ + return -EINVAL; +} + +// 1 arg instructions. +#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \ + { printk( #i " not yet done.\n"); return 0; } + +NOTYETn(ftrv) +NOTYETn(fsqrt) +NOTYETn(fipr) +NOTYETn(fsca) +NOTYETn(fsrra) + +#define EMU_FLOAT_X(SZ,N) do { \ + FP_DECL_##SZ(Fn); \ + FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \ + PACK_##SZ(N, Fn); }while(0) +static int ffloat(struct sh_fpu_soft_struct *fregs, int n) +{ + FP_DECL_EX; + + if (FPSCR_PR) + EMU_FLOAT_X(D, DRn); + else + EMU_FLOAT_X(S, FRn); + + return 0; +} + +#define EMU_FTRC_X(SZ,N) do { \ + FP_DECL_##SZ(Fn); \ + UNPACK_##SZ(Fn, N); \ + FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0) +static int ftrc(struct sh_fpu_soft_struct *fregs, int n) +{ + FP_DECL_EX; + + if (FPSCR_PR) + EMU_FTRC_X(D, DRn); + else + EMU_FTRC_X(S, FRn); + + return 0; +} + +static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n) +{ + FP_DECL_EX; + FP_DECL_S(Fn); + FP_DECL_D(Fr); + UNPACK_S(Fn, FPUL); + FP_CONV(D, S, 2, 1, Fr, Fn); + PACK_D(DRn, Fr); + return 0; +} + +static int fcnvds(struct sh_fpu_soft_struct *fregs, int n) +{ + FP_DECL_EX; + FP_DECL_D(Fn); + FP_DECL_S(Fr); + UNPACK_D(Fn, DRn); + FP_CONV(S, D, 1, 2, Fr, Fn); + PACK_S(FPUL, Fr); + return 0; +} + +static int fxchg(struct sh_fpu_soft_struct *fregs, int flag) +{ + FPSCR ^= flag; + return 0; +} + +static int fsts(struct sh_fpu_soft_struct *fregs, int n) +{ + FRn = FPUL; + return 0; +} + +static int flds(struct sh_fpu_soft_struct *fregs, int n) +{ + FPUL = FRn; + return 0; +} + +static int fneg(struct sh_fpu_soft_struct *fregs, int n) +{ + FRn ^= (1 << (_FP_W_TYPE_SIZE - 1)); + return 0; +} + +static int fabs(struct sh_fpu_soft_struct *fregs, int n) +{ + FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1)); + return 0; +} + +static int fld0(struct sh_fpu_soft_struct *fregs, int n) +{ + FRn = 0; + return 0; +} + +static int fld1(struct sh_fpu_soft_struct *fregs, int n) +{ + FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1)); + return 0; +} + +static int fnop_n(struct sh_fpu_soft_struct *fregs, int n) +{ + return -EINVAL; +} + +/// Instruction decoders. + +static int id_fxfd(struct sh_fpu_soft_struct *, int); +static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int); + +static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = { + fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra, + fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd +}; + +static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = { + fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx, + fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec, + fmov_reg_reg, id_fnxd, fmac, fnop_mn}; + +static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x) +{ + const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 }; + switch (x & 3) { + case 3: + fxchg(fregs, flag[x >> 2]); + break; + case 1: + ftrv(fregs, x - 1); + break; + default: + fsca(fregs, x); + } + return 0; +} + +static int +id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n) +{ + return (fnxd[x])(fregs, n); +} + +static int +id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code) +{ + int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf; + return (fnmx[x])(fregs, regs, m, n); +} + +static int +id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code) +{ + int n = ((code >> 8) & 0xf); + unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR; + + switch (code & 0xf0ff) { + case 0x005a: + case 0x006a: + Rn = *reg; + break; + case 0x405a: + case 0x406a: + *reg = Rn; + break; + case 0x4052: + case 0x4062: + Rn -= 4; + WRITE(*reg, Rn); + break; + case 0x4056: + case 0x4066: + READ(*reg, Rn); + Rn += 4; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs) +{ + if ((code & 0xf000) == 0xf000) + return id_fnmx(fregs, regs, code); + else + return id_sys(fregs, regs, code); +} + +/** + * denormal_to_double - Given denormalized float number, + * store double float + * + * @fpu: Pointer to sh_fpu_hard structure + * @n: Index to FP register + */ +static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n) +{ + unsigned long du, dl; + unsigned long x = fpu->fpul; + int exp = 1023 - 126; + + if (x != 0 && (x & 0x7f800000) == 0) { + du = (x & 0x80000000); + while ((x & 0x00800000) == 0) { + x <<= 1; + exp--; + } + x &= 0x007fffff; + du |= (exp << 20) | (x >> 3); + dl = x << 29; + + fpu->fp_regs[n] = du; + fpu->fp_regs[n+1] = dl; + } +} + +/** + * ieee_fpe_handler - Handle denormalized number exception + * + * @regs: Pointer to register structure + * + * Returns 1 when it's handled (should not cause exception). + */ +static int ieee_fpe_handler(struct pt_regs *regs) +{ + unsigned short insn = *(unsigned short *)regs->pc; + unsigned short finsn; + unsigned long nextpc; + int nib[4] = { + (insn >> 12) & 0xf, + (insn >> 8) & 0xf, + (insn >> 4) & 0xf, + insn & 0xf}; + + if (nib[0] == 0xb || + (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ + regs->pr = regs->pc + 4; + + if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ + nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + else + nextpc = regs->pc + 4; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4; + else + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x4 && nib[3] == 0xb && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */ + nextpc = regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x0 && nib[3] == 0x3 && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */ + nextpc = regs->pc + 4 + regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (insn == 0x000b) { /* rts */ + nextpc = regs->pr; + finsn = *(unsigned short *) (regs->pc + 2); + } else { + nextpc = regs->pc + 2; + finsn = insn; + } + + if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */ + struct task_struct *tsk = current; + + if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) { + /* FPU error */ + denormal_to_double (&tsk->thread.fpu.hard, + (finsn >> 8) & 0xf); + tsk->thread.fpu.hard.fpscr &= + ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + } else { + tsk->thread.trap_no = 11; + tsk->thread.error_code = 0; + force_sig(SIGFPE, tsk); + } + + regs->pc = nextpc; + return 1; + } + + return 0; +} + +asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + struct task_struct *tsk = current; + + if (ieee_fpe_handler (®s)) + return; + + regs.pc += 2; + tsk->thread.trap_no = 11; + tsk->thread.error_code = 0; + force_sig(SIGFPE, tsk); +} + +/** + * fpu_init - Initialize FPU registers + * @fpu: Pointer to software emulated FPU registers. + */ +static void fpu_init(struct sh_fpu_soft_struct *fpu) +{ + int i; + + fpu->fpscr = FPSCR_INIT; + fpu->fpul = 0; + + for (i = 0; i < 16; i++) { + fpu->fp_regs[i] = 0; + fpu->xfp_regs[i]= 0; + } +} + +/** + * do_fpu_inst - Handle reserved instructions for FPU emulation + * @inst: instruction code. + * @regs: registers on stack. + */ +int do_fpu_inst(unsigned short inst, struct pt_regs *regs) +{ + struct task_struct *tsk = current; + struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft); + + if (!test_tsk_thread_flag(tsk, TIF_USEDFPU)) { + /* initialize once. */ + fpu_init(fpu); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + } + + return fpu_emulate(inst, fpu, regs); +} diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h new file mode 100644 index 00000000000..8ae1bd310ad --- /dev/null +++ b/arch/sh/math-emu/sfp-util.h @@ -0,0 +1,72 @@ +/* + * These are copied from glibc/stdlib/longlong.h + */ + +#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ + do { \ + UWtype __x; \ + __x = (al) + (bl); \ + (sh) = (ah) + (bh) + (__x < (al)); \ + (sl) = __x; \ + } while (0) + +#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ + do { \ + UWtype __x; \ + __x = (al) - (bl); \ + (sh) = (ah) - (bh) - (__x > (al)); \ + (sl) = __x; \ + } while (0) + +#define umul_ppmm(w1, w0, u, v) \ + __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \ + : "=r" ((u32)(w1)), "=r" ((u32)(w0)) \ + : "r" ((u32)(u)), "r" ((u32)(v)) \ + : "macl", "mach") + +#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) + +#define udiv_qrnnd(q, r, n1, n0, d) \ + do { \ + UWtype __d1, __d0, __q1, __q0; \ + UWtype __r1, __r0, __m; \ + __d1 = __ll_highpart (d); \ + __d0 = __ll_lowpart (d); \ + \ + __r1 = (n1) % __d1; \ + __q1 = (n1) / __d1; \ + __m = (UWtype) __q1 * __d0; \ + __r1 = __r1 * __ll_B | __ll_highpart (n0); \ + if (__r1 < __m) \ + { \ + __q1--, __r1 += (d); \ + if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ + if (__r1 < __m) \ + __q1--, __r1 += (d); \ + } \ + __r1 -= __m; \ + \ + __r0 = __r1 % __d1; \ + __q0 = __r1 / __d1; \ + __m = (UWtype) __q0 * __d0; \ + __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ + if (__r0 < __m) \ + { \ + __q0--, __r0 += (d); \ + if (__r0 >= (d)) \ + if (__r0 < __m) \ + __q0--, __r0 += (d); \ + } \ + __r0 -= __m; \ + \ + (q) = (UWtype) __q1 * __ll_B | __q0; \ + (r) = __r0; \ + } while (0) + +#define abort() return 0 + +#define __BYTE_ORDER __LITTLE_ENDIAN + + diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index fb586b1cf8b..9dd606464d2 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -20,7 +20,10 @@ config CPU_SH4 config CPU_SH4A bool select CPU_SH4 - select CPU_HAS_INTC2_IRQ + +config CPU_SH4AL_DSP + bool + select CPU_SH4A config CPU_SUBTYPE_ST40 bool @@ -48,6 +51,12 @@ config CPU_SUBTYPE_SH7705 select CPU_SH3 select CPU_HAS_PINT_IRQ +config CPU_SUBTYPE_SH7706 + bool "Support SH7706 processor" + select CPU_SH3 + help + Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. + config CPU_SUBTYPE_SH7707 bool "Support SH7707 processor" select CPU_SH3 @@ -69,6 +78,12 @@ config CPU_SUBTYPE_SH7709 help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. +config CPU_SUBTYPE_SH7710 + bool "Support SH7710 processor" + select CPU_SH3 + help + Select SH7710 if you have a SH3-DSP SH7710 CPU. + comment "SH-4 Processor Support" config CPU_SUBTYPE_SH7750 @@ -133,10 +148,6 @@ config CPU_SUBTYPE_ST40GX1 comment "SH-4A Processor Support" -config CPU_SUBTYPE_SH73180 - bool "Support SH73180 processor" - select CPU_SH4A - config CPU_SUBTYPE_SH7770 bool "Support SH7770 processor" select CPU_SH4A @@ -144,6 +155,17 @@ config CPU_SUBTYPE_SH7770 config CPU_SUBTYPE_SH7780 bool "Support SH7780 processor" select CPU_SH4A + select CPU_HAS_INTC2_IRQ + +comment "SH4AL-DSP Processor Support" + +config CPU_SUBTYPE_SH73180 + bool "Support SH73180 processor" + select CPU_SH4AL_DSP + +config CPU_SUBTYPE_SH7343 + bool "Support SH7343 processor" + select CPU_SH4AL_DSP endmenu @@ -161,15 +183,59 @@ config MMU turning this off will boot the kernel on these machines with the MMU implicitly switched off. +config PAGE_OFFSET + hex + default "0x80000000" if MMU + default "0x00000000" + +config MEMORY_START + hex "Physical memory start address" + default "0x08000000" + ---help--- + Computers built with Hitachi SuperH processors always + map the ROM starting at address zero. But the processor + does not specify the range that RAM takes. + + The physical memory (RAM) start address will be automatically + set to 08000000. Other platforms, such as the Solution Engine + boards typically map RAM at 0C000000. + + Tweak this only when porting to a new machine which does not + already have a defconfig. Changing it from the known correct + value on any of the known systems will only lead to disaster. + +config MEMORY_SIZE + hex "Physical memory size" + default "0x00400000" + help + This sets the default memory size assumed by your SH kernel. It can + be overridden as normal by the 'mem=' argument on the kernel command + line. If unsure, consult your board specifications or just leave it + as 0x00400000 which was the default value before this became + configurable. + config 32BIT bool "Support 32-bit physical addressing through PMB" - depends on CPU_SH4A + depends on CPU_SH4A && MMU default y help If you say Y here, physical addressing will be extended to 32-bits through the SH-4A PMB. If this is not set, legacy 29-bit physical addressing will be used. +config VSYSCALL + bool "Support vsyscall page" + depends on MMU + default y + help + This will enable support for the kernel mapping a vDSO page + in process space, and subsequently handing down the entry point + to the libc through the ELF auxiliary vector. + + From the kernel side this is used for the signal trampoline. + For systems with an MMU that can afford to give up a page, + (the default value) say Y. + choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && CPU_SH4 && MMU diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 9489a142464..3ffd7f68c0a 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -6,20 +6,26 @@ obj-y := init.o extable.o consistent.o obj-$(CONFIG_CPU_SH2) += cache-sh2.o obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o pg-sh4.o +obj-$(CONFIG_CPU_SH4) += cache-sh4.o obj-$(CONFIG_DMA_PAGE_OPS) += pg-dma.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o -mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o +mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \ + ioremap.o obj-y += $(mmu-y) +ifdef CONFIG_DEBUG_FS +obj-$(CONFIG_CPU_SH4) += cache-debugfs.o +endif + ifdef CONFIG_MMU -obj-$(CONFIG_CPU_SH3) += tlb-sh3.o -obj-$(CONFIG_CPU_SH4) += tlb-sh4.o ioremap.o +obj-$(CONFIG_CPU_SH3) += tlb-sh3.o +obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o endif -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +obj-$(CONFIG_32BIT) += pmb.o diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c new file mode 100644 index 00000000000..a22d914e4d1 --- /dev/null +++ b/arch/sh/mm/cache-debugfs.c @@ -0,0 +1,147 @@ +/* + * debugfs ops for the L1 cache + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/cache.h> +#include <asm/io.h> + +enum cache_type { + CACHE_TYPE_ICACHE, + CACHE_TYPE_DCACHE, + CACHE_TYPE_UNIFIED, +}; + +static int cache_seq_show(struct seq_file *file, void *iter) +{ + unsigned int cache_type = (unsigned int)file->private; + struct cache_info *cache; + unsigned int waysize, way, cache_size; + unsigned long ccr, base; + static unsigned long addrstart = 0; + + /* + * Go uncached immediately so we don't skew the results any + * more than we already are.. + */ + jump_to_P2(); + + ccr = ctrl_inl(CCR); + if ((ccr & CCR_CACHE_ENABLE) == 0) { + back_to_P1(); + + seq_printf(file, "disabled\n"); + return 0; + } + + if (cache_type == CACHE_TYPE_DCACHE) { + base = CACHE_OC_ADDRESS_ARRAY; + cache = &cpu_data->dcache; + } else { + base = CACHE_IC_ADDRESS_ARRAY; + cache = &cpu_data->icache; + } + + /* + * Due to the amount of data written out (depending on the cache size), + * we may be iterated over multiple times. In this case, keep track of + * the entry position in addrstart, and rewind it when we've hit the + * end of the cache. + * + * Likewise, the same code is used for multiple caches, so care must + * be taken for bouncing addrstart back and forth so the appropriate + * cache is hit. + */ + cache_size = cache->ways * cache->sets * cache->linesz; + if (((addrstart & 0xff000000) != base) || + (addrstart & 0x00ffffff) > cache_size) + addrstart = base; + + waysize = cache->sets; + + /* + * If the OC is already in RAM mode, we only have + * half of the entries to consider.. + */ + if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE) + waysize >>= 1; + + waysize <<= cache->entry_shift; + + for (way = 0; way < cache->ways; way++) { + unsigned long addr; + unsigned int line; + + seq_printf(file, "-----------------------------------------\n"); + seq_printf(file, "Way %d\n", way); + seq_printf(file, "-----------------------------------------\n"); + + for (addr = addrstart, line = 0; + addr < addrstart + waysize; + addr += cache->linesz, line++) { + unsigned long data = ctrl_inl(addr); + + /* Check the V bit, ignore invalid cachelines */ + if ((data & 1) == 0) + continue; + + /* U: Dirty, cache tag is 10 bits up */ + seq_printf(file, "%3d: %c 0x%lx\n", + line, data & 2 ? 'U' : ' ', + data & 0x1ffffc00); + } + + addrstart += cache->way_incr; + } + + back_to_P1(); + + return 0; +} + +static int cache_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, cache_seq_show, inode->u.generic_ip); +} + +static struct file_operations cache_debugfs_fops = { + .owner = THIS_MODULE, + .open = cache_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init cache_debugfs_init(void) +{ + struct dentry *dcache_dentry, *icache_dentry; + + dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL, + (unsigned int *)CACHE_TYPE_DCACHE, + &cache_debugfs_fops); + if (IS_ERR(dcache_dentry)) + return PTR_ERR(dcache_dentry); + + icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL, + (unsigned int *)CACHE_TYPE_ICACHE, + &cache_debugfs_fops); + if (IS_ERR(icache_dentry)) { + debugfs_remove(dcache_dentry); + return PTR_ERR(icache_dentry); + } + + return 0; +} +module_init(cache_debugfs_init); + +MODULE_LICENSE("GPL v2"); diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 524cea5b47f..e48cc22724d 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -2,49 +2,120 @@ * arch/sh/mm/cache-sh4.c * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2001 - 2006 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include <linux/init.h> -#include <linux/mman.h> #include <linux/mm.h> -#include <linux/threads.h> #include <asm/addrspace.h> -#include <asm/page.h> #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/cache.h> #include <asm/io.h> -#include <asm/uaccess.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> -extern void __flush_cache_4096_all(unsigned long start); -static void __flush_cache_4096_all_ex(unsigned long start); -extern void __flush_dcache_all(void); -static void __flush_dcache_all_ex(void); +/* + * The maximum number of pages we support up to when doing ranged dcache + * flushing. Anything exceeding this will simply flush the dcache in its + * entirety. + */ +#define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ + +static void __flush_dcache_segment_1way(unsigned long start, + unsigned long extent); +static void __flush_dcache_segment_2way(unsigned long start, + unsigned long extent); +static void __flush_dcache_segment_4way(unsigned long start, + unsigned long extent); + +static void __flush_cache_4096(unsigned long addr, unsigned long phys, + unsigned long exec_offset); + +/* + * This is initialised here to ensure that it is not placed in the BSS. If + * that were to happen, note that cache_init gets called before the BSS is + * cleared, so this would get nulled out which would be hopeless. + */ +static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) = + (void (*)(unsigned long, unsigned long))0xdeadbeef; + +static void compute_alias(struct cache_info *c) +{ + c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1); + c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1; +} + +static void __init emit_cache_params(void) +{ + printk("PVR=%08x CVR=%08x PRR=%08x\n", + ctrl_inl(CCN_PVR), + ctrl_inl(CCN_CVR), + ctrl_inl(CCN_PRR)); + printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", + cpu_data->icache.ways, + cpu_data->icache.sets, + cpu_data->icache.way_incr); + printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", + cpu_data->icache.entry_mask, + cpu_data->icache.alias_mask, + cpu_data->icache.n_aliases); + printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", + cpu_data->dcache.ways, + cpu_data->dcache.sets, + cpu_data->dcache.way_incr); + printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", + cpu_data->dcache.entry_mask, + cpu_data->dcache.alias_mask, + cpu_data->dcache.n_aliases); + + if (!__flush_dcache_segment_fn) + panic("unknown number of cache ways\n"); +} /* * SH-4 has virtually indexed and physically tagged cache. */ -struct semaphore p3map_sem[4]; +/* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */ +#define MAX_P3_SEMAPHORES 16 + +struct semaphore p3map_sem[MAX_P3_SEMAPHORES]; void __init p3_cache_init(void) { - if (remap_area_pages(P3SEG, 0, PAGE_SIZE*4, _PAGE_CACHABLE)) + int i; + + compute_alias(&cpu_data->icache); + compute_alias(&cpu_data->dcache); + + switch (cpu_data->dcache.ways) { + case 1: + __flush_dcache_segment_fn = __flush_dcache_segment_1way; + break; + case 2: + __flush_dcache_segment_fn = __flush_dcache_segment_2way; + break; + case 4: + __flush_dcache_segment_fn = __flush_dcache_segment_4way; + break; + default: + __flush_dcache_segment_fn = NULL; + break; + } + + emit_cache_params(); + + if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE)) panic("%s failed.", __FUNCTION__); - sema_init (&p3map_sem[0], 1); - sema_init (&p3map_sem[1], 1); - sema_init (&p3map_sem[2], 1); - sema_init (&p3map_sem[3], 1); + for (i = 0; i < cpu_data->dcache.n_aliases; i++) + sema_init(&p3map_sem[i], 1); } /* @@ -89,7 +160,6 @@ void __flush_purge_region(void *start, int size) } } - /* * No write back please */ @@ -108,40 +178,6 @@ void __flush_invalidate_region(void *start, int size) } } -static void __flush_dcache_all_ex(void) -{ - unsigned long addr, end_addr, entry_offset; - - end_addr = CACHE_OC_ADDRESS_ARRAY + (cpu_data->dcache.sets << cpu_data->dcache.entry_shift) * cpu_data->dcache.ways; - entry_offset = 1 << cpu_data->dcache.entry_shift; - for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; addr += entry_offset) { - ctrl_outl(0, addr); - } -} - -static void __flush_cache_4096_all_ex(unsigned long start) -{ - unsigned long addr, entry_offset; - int i; - - entry_offset = 1 << cpu_data->dcache.entry_shift; - for (i = 0; i < cpu_data->dcache.ways; i++, start += cpu_data->dcache.way_incr) { - for (addr = CACHE_OC_ADDRESS_ARRAY + start; - addr < CACHE_OC_ADDRESS_ARRAY + 4096 + start; - addr += entry_offset) { - ctrl_outl(0, addr); - } - } -} - -void flush_cache_4096_all(unsigned long start) -{ - if (cpu_data->dcache.ways == 1) - __flush_cache_4096_all(start); - else - __flush_cache_4096_all_ex(start); -} - /* * Write back the range of D-cache, and purge the I-cache. * @@ -153,14 +189,14 @@ void flush_icache_range(unsigned long start, unsigned long end) } /* - * Write back the D-cache and purge the I-cache for signal trampoline. + * Write back the D-cache and purge the I-cache for signal trampoline. * .. which happens to be the same behavior as flush_icache_range(). * So, we simply flush out a line. */ void flush_cache_sigtramp(unsigned long addr) { unsigned long v, index; - unsigned long flags; + unsigned long flags; int i; v = addr & ~(L1_CACHE_BYTES-1); @@ -172,30 +208,33 @@ void flush_cache_sigtramp(unsigned long addr) local_irq_save(flags); jump_to_P2(); - for(i = 0; i < cpu_data->icache.ways; i++, index += cpu_data->icache.way_incr) + + for (i = 0; i < cpu_data->icache.ways; + i++, index += cpu_data->icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ + back_to_P1(); + wmb(); local_irq_restore(flags); } static inline void flush_cache_4096(unsigned long start, unsigned long phys) { - unsigned long flags; - extern void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long exec_offset); + unsigned long flags, exec_offset = 0; /* - * SH7751, SH7751R, and ST40 have no restriction to handle cache. - * (While SH7750 must do that at P2 area.) + * All types of SH-4 require PC to be in P2 to operate on the I-cache. + * Some types of SH-4 require PC to be in P2 to operate on the D-cache. */ - if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) - || start < CACHE_OC_ADDRESS_ARRAY) { - local_irq_save(flags); - __flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0x20000000); - local_irq_restore(flags); - } else { - __flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0); - } + if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || + (start < CACHE_OC_ADDRESS_ARRAY)) + exec_offset = 0x20000000; + + local_irq_save(flags); + __flush_cache_4096(start | SH_CACHE_ASSOC, + P1SEGADDR(phys), exec_offset); + local_irq_restore(flags); } /* @@ -206,15 +245,19 @@ void flush_dcache_page(struct page *page) { if (test_bit(PG_mapped, &page->flags)) { unsigned long phys = PHYSADDR(page_address(page)); + unsigned long addr = CACHE_OC_ADDRESS_ARRAY; + int i, n; /* Loop all the D-cache */ - flush_cache_4096(CACHE_OC_ADDRESS_ARRAY, phys); - flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x1000, phys); - flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x2000, phys); - flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x3000, phys); + n = cpu_data->dcache.n_aliases; + for (i = 0; i < n; i++, addr += PAGE_SIZE) + flush_cache_4096(addr, phys); } + + wmb(); } +/* TODO: Selective icache invalidation through IC address array.. */ static inline void flush_icache_all(void) { unsigned long flags, ccr; @@ -227,34 +270,142 @@ static inline void flush_icache_all(void) ccr |= CCR_CACHE_ICI; ctrl_outl(ccr, CCR); + /* + * back_to_P1() will take care of the barrier for us, don't add + * another one! + */ + back_to_P1(); local_irq_restore(flags); } +void flush_dcache_all(void) +{ + (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size); + wmb(); +} + void flush_cache_all(void) { - if (cpu_data->dcache.ways == 1) - __flush_dcache_all(); - else - __flush_dcache_all_ex(); + flush_dcache_all(); flush_icache_all(); } +static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, + unsigned long end) +{ + unsigned long d = 0, p = start & PAGE_MASK; + unsigned long alias_mask = cpu_data->dcache.alias_mask; + unsigned long n_aliases = cpu_data->dcache.n_aliases; + unsigned long select_bit; + unsigned long all_aliases_mask; + unsigned long addr_offset; + pgd_t *dir; + pmd_t *pmd; + pud_t *pud; + pte_t *pte; + int i; + + dir = pgd_offset(mm, p); + pud = pud_offset(dir, p); + pmd = pmd_offset(pud, p); + end = PAGE_ALIGN(end); + + all_aliases_mask = (1 << n_aliases) - 1; + + do { + if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) { + p &= PMD_MASK; + p += PMD_SIZE; + pmd++; + + continue; + } + + pte = pte_offset_kernel(pmd, p); + + do { + unsigned long phys; + pte_t entry = *pte; + + if (!(pte_val(entry) & _PAGE_PRESENT)) { + pte++; + p += PAGE_SIZE; + continue; + } + + phys = pte_val(entry) & PTE_PHYS_MASK; + + if ((p ^ phys) & alias_mask) { + d |= 1 << ((p & alias_mask) >> PAGE_SHIFT); + d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT); + + if (d == all_aliases_mask) + goto loop_exit; + } + + pte++; + p += PAGE_SIZE; + } while (p < end && ((unsigned long)pte & ~PAGE_MASK)); + pmd++; + } while (p < end); + +loop_exit: + addr_offset = 0; + select_bit = 1; + + for (i = 0; i < n_aliases; i++) { + if (d & select_bit) { + (*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE); + wmb(); + } + + select_bit <<= 1; + addr_offset += PAGE_SIZE; + } +} + +/* + * Note : (RPC) since the caches are physically tagged, the only point + * of flush_cache_mm for SH-4 is to get rid of aliases from the + * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that + * lines can stay resident so long as the virtual address they were + * accessed with (hence cache set) is in accord with the physical + * address (i.e. tag). It's no different here. So I reckon we don't + * need to flush the I-cache, since aliases don't matter for that. We + * should try that. + * + * Caller takes mm->mmap_sem. + */ void flush_cache_mm(struct mm_struct *mm) { - /* Is there any good way? */ - /* XXX: possibly call flush_cache_range for each vm area */ - /* - * FIXME: Really, the optimal solution here would be able to flush out - * individual lines created by the specified context, but this isn't - * feasible for a number of architectures (such as MIPS, and some - * SPARC) .. is this possible for SuperH? - * - * In the meantime, we'll just flush all of the caches.. this - * seems to be the simplest way to avoid at least a few wasted - * cache flushes. -Lethal + /* + * If cache is only 4k-per-way, there are never any 'aliases'. Since + * the cache is physically tagged, the data can just be left in there. */ - flush_cache_all(); + if (cpu_data->dcache.n_aliases == 0) + return; + + /* + * Don't bother groveling around the dcache for the VMA ranges + * if there are too many PTEs to make it worthwhile. + */ + if (mm->nr_ptes >= MAX_DCACHE_PAGES) + flush_dcache_all(); + else { + struct vm_area_struct *vma; + + /* + * In this case there are reasonably sized ranges to flush, + * iterate through the VMA list and take care of any aliases. + */ + for (vma = mm->mmap; vma; vma = vma->vm_next) + __flush_cache_mm(mm, vma->vm_start, vma->vm_end); + } + + /* Only touch the icache if one of the VMAs has VM_EXEC set. */ + if (mm->exec_vm) + flush_icache_all(); } /* @@ -263,27 +414,40 @@ void flush_cache_mm(struct mm_struct *mm) * ADDR: Virtual Address (U0 address) * PFN: Physical page number */ -void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn) +void flush_cache_page(struct vm_area_struct *vma, unsigned long address, + unsigned long pfn) { unsigned long phys = pfn << PAGE_SHIFT; + unsigned int alias_mask; + + alias_mask = cpu_data->dcache.alias_mask; /* We only need to flush D-cache when we have alias */ - if ((address^phys) & CACHE_ALIAS) { + if ((address^phys) & alias_mask) { /* Loop 4K of the D-cache */ flush_cache_4096( - CACHE_OC_ADDRESS_ARRAY | (address & CACHE_ALIAS), + CACHE_OC_ADDRESS_ARRAY | (address & alias_mask), phys); /* Loop another 4K of the D-cache */ flush_cache_4096( - CACHE_OC_ADDRESS_ARRAY | (phys & CACHE_ALIAS), + CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask), phys); } - if (vma->vm_flags & VM_EXEC) - /* Loop 4K (half) of the I-cache */ + alias_mask = cpu_data->icache.alias_mask; + if (vma->vm_flags & VM_EXEC) { + /* + * Evict entries from the portion of the cache from which code + * may have been executed at this address (virtual). There's + * no need to evict from the portion corresponding to the + * physical address as for the D-cache, because we know the + * kernel has never executed the code through its identity + * translation. + */ flush_cache_4096( - CACHE_IC_ADDRESS_ARRAY | (address & 0x1000), + CACHE_IC_ADDRESS_ARRAY | (address & alias_mask), phys); + } } /* @@ -298,52 +462,31 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigne void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - unsigned long p = start & PAGE_MASK; - pgd_t *dir; - pmd_t *pmd; - pte_t *pte; - pte_t entry; - unsigned long phys; - unsigned long d = 0; - - dir = pgd_offset(vma->vm_mm, p); - pmd = pmd_offset(dir, p); + /* + * If cache is only 4k-per-way, there are never any 'aliases'. Since + * the cache is physically tagged, the data can just be left in there. + */ + if (cpu_data->dcache.n_aliases == 0) + return; - do { - if (pmd_none(*pmd) || pmd_bad(*pmd)) { - p &= ~((1 << PMD_SHIFT) -1); - p += (1 << PMD_SHIFT); - pmd++; - continue; - } - pte = pte_offset_kernel(pmd, p); - do { - entry = *pte; - if ((pte_val(entry) & _PAGE_PRESENT)) { - phys = pte_val(entry)&PTE_PHYS_MASK; - if ((p^phys) & CACHE_ALIAS) { - d |= 1 << ((p & CACHE_ALIAS)>>12); - d |= 1 << ((phys & CACHE_ALIAS)>>12); - if (d == 0x0f) - goto loop_exit; - } - } - pte++; - p += PAGE_SIZE; - } while (p < end && ((unsigned long)pte & ~PAGE_MASK)); - pmd++; - } while (p < end); - loop_exit: - if (d & 1) - flush_cache_4096_all(0); - if (d & 2) - flush_cache_4096_all(0x1000); - if (d & 4) - flush_cache_4096_all(0x2000); - if (d & 8) - flush_cache_4096_all(0x3000); - if (vma->vm_flags & VM_EXEC) + /* + * Don't bother with the lookup and alias check if we have a + * wide range to cover, just blow away the dcache in its + * entirety instead. -- PFM. + */ + if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES) + flush_dcache_all(); + else + __flush_cache_mm(vma->vm_mm, start, end); + + if (vma->vm_flags & VM_EXEC) { + /* + * TODO: Is this required??? Need to look at how I-cache + * coherency is assured when new programs are loaded to see if + * this matters. + */ flush_icache_all(); + } } /* @@ -357,5 +500,273 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len) { flush_cache_page(vma, addr, page_to_pfn(page)); + mb(); +} + +/** + * __flush_cache_4096 + * + * @addr: address in memory mapped cache array + * @phys: P1 address to flush (has to match tags if addr has 'A' bit + * set i.e. associative write) + * @exec_offset: set to 0x20000000 if flush has to be executed from P2 + * region else 0x0 + * + * The offset into the cache array implied by 'addr' selects the + * 'colour' of the virtual address range that will be flushed. The + * operation (purge/write-back) is selected by the lower 2 bits of + * 'phys'. + */ +static void __flush_cache_4096(unsigned long addr, unsigned long phys, + unsigned long exec_offset) +{ + int way_count; + unsigned long base_addr = addr; + struct cache_info *dcache; + unsigned long way_incr; + unsigned long a, ea, p; + unsigned long temp_pc; + + dcache = &cpu_data->dcache; + /* Write this way for better assembly. */ + way_count = dcache->ways; + way_incr = dcache->way_incr; + + /* + * Apply exec_offset (i.e. branch to P2 if required.). + * + * FIXME: + * + * If I write "=r" for the (temp_pc), it puts this in r6 hence + * trashing exec_offset before it's been added on - why? Hence + * "=&r" as a 'workaround' + */ + asm volatile("mov.l 1f, %0\n\t" + "add %1, %0\n\t" + "jmp @%0\n\t" + "nop\n\t" + ".balign 4\n\t" + "1: .long 2f\n\t" + "2:\n" : "=&r" (temp_pc) : "r" (exec_offset)); + + /* + * We know there will be >=1 iteration, so write as do-while to avoid + * pointless nead-of-loop check for 0 iterations. + */ + do { + ea = base_addr + PAGE_SIZE; + a = base_addr; + p = phys; + + do { + *(volatile unsigned long *)a = p; + /* + * Next line: intentionally not p+32, saves an add, p + * will do since only the cache tag bits need to + * match. + */ + *(volatile unsigned long *)(a+32) = p; + a += 64; + p += 64; + } while (a < ea); + + base_addr += way_incr; + } while (--way_count != 0); } +/* + * Break the 1, 2 and 4 way variants of this out into separate functions to + * avoid nearly all the overhead of having the conditional stuff in the function + * bodies (+ the 1 and 2 way cases avoid saving any registers too). + */ +static void __flush_dcache_segment_1way(unsigned long start, + unsigned long extent_per_way) +{ + unsigned long orig_sr, sr_with_bl; + unsigned long base_addr; + unsigned long way_incr, linesz, way_size; + struct cache_info *dcache; + register unsigned long a0, a0e; + + asm volatile("stc sr, %0" : "=r" (orig_sr)); + sr_with_bl = orig_sr | (1<<28); + base_addr = ((unsigned long)&empty_zero_page[0]); + + /* + * The previous code aligned base_addr to 16k, i.e. the way_size of all + * existing SH-4 D-caches. Whilst I don't see a need to have this + * aligned to any better than the cache line size (which it will be + * anyway by construction), let's align it to at least the way_size of + * any existing or conceivable SH-4 D-cache. -- RPC + */ + base_addr = ((base_addr >> 16) << 16); + base_addr |= start; + + dcache = &cpu_data->dcache; + linesz = dcache->linesz; + way_incr = dcache->way_incr; + way_size = dcache->way_size; + + a0 = base_addr; + a0e = base_addr + extent_per_way; + do { + asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); + asm volatile("movca.l r0, @%0\n\t" + "ocbi @%0" : : "r" (a0)); + a0 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "ocbi @%0" : : "r" (a0)); + a0 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "ocbi @%0" : : "r" (a0)); + a0 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "ocbi @%0" : : "r" (a0)); + asm volatile("ldc %0, sr" : : "r" (orig_sr)); + a0 += linesz; + } while (a0 < a0e); +} + +static void __flush_dcache_segment_2way(unsigned long start, + unsigned long extent_per_way) +{ + unsigned long orig_sr, sr_with_bl; + unsigned long base_addr; + unsigned long way_incr, linesz, way_size; + struct cache_info *dcache; + register unsigned long a0, a1, a0e; + + asm volatile("stc sr, %0" : "=r" (orig_sr)); + sr_with_bl = orig_sr | (1<<28); + base_addr = ((unsigned long)&empty_zero_page[0]); + + /* See comment under 1-way above */ + base_addr = ((base_addr >> 16) << 16); + base_addr |= start; + + dcache = &cpu_data->dcache; + linesz = dcache->linesz; + way_incr = dcache->way_incr; + way_size = dcache->way_size; + + a0 = base_addr; + a1 = a0 + way_incr; + a0e = base_addr + extent_per_way; + do { + asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "ocbi @%0\n\t" + "ocbi @%1" : : + "r" (a0), "r" (a1)); + a0 += linesz; + a1 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "ocbi @%0\n\t" + "ocbi @%1" : : + "r" (a0), "r" (a1)); + a0 += linesz; + a1 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "ocbi @%0\n\t" + "ocbi @%1" : : + "r" (a0), "r" (a1)); + a0 += linesz; + a1 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "ocbi @%0\n\t" + "ocbi @%1" : : + "r" (a0), "r" (a1)); + asm volatile("ldc %0, sr" : : "r" (orig_sr)); + a0 += linesz; + a1 += linesz; + } while (a0 < a0e); +} + +static void __flush_dcache_segment_4way(unsigned long start, + unsigned long extent_per_way) +{ + unsigned long orig_sr, sr_with_bl; + unsigned long base_addr; + unsigned long way_incr, linesz, way_size; + struct cache_info *dcache; + register unsigned long a0, a1, a2, a3, a0e; + + asm volatile("stc sr, %0" : "=r" (orig_sr)); + sr_with_bl = orig_sr | (1<<28); + base_addr = ((unsigned long)&empty_zero_page[0]); + + /* See comment under 1-way above */ + base_addr = ((base_addr >> 16) << 16); + base_addr |= start; + + dcache = &cpu_data->dcache; + linesz = dcache->linesz; + way_incr = dcache->way_incr; + way_size = dcache->way_size; + + a0 = base_addr; + a1 = a0 + way_incr; + a2 = a1 + way_incr; + a3 = a2 + way_incr; + a0e = base_addr + extent_per_way; + do { + asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "movca.l r0, @%2\n\t" + "movca.l r0, @%3\n\t" + "ocbi @%0\n\t" + "ocbi @%1\n\t" + "ocbi @%2\n\t" + "ocbi @%3\n\t" : : + "r" (a0), "r" (a1), "r" (a2), "r" (a3)); + a0 += linesz; + a1 += linesz; + a2 += linesz; + a3 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "movca.l r0, @%2\n\t" + "movca.l r0, @%3\n\t" + "ocbi @%0\n\t" + "ocbi @%1\n\t" + "ocbi @%2\n\t" + "ocbi @%3\n\t" : : + "r" (a0), "r" (a1), "r" (a2), "r" (a3)); + a0 += linesz; + a1 += linesz; + a2 += linesz; + a3 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "movca.l r0, @%2\n\t" + "movca.l r0, @%3\n\t" + "ocbi @%0\n\t" + "ocbi @%1\n\t" + "ocbi @%2\n\t" + "ocbi @%3\n\t" : : + "r" (a0), "r" (a1), "r" (a2), "r" (a3)); + a0 += linesz; + a1 += linesz; + a2 += linesz; + a3 += linesz; + asm volatile("movca.l r0, @%0\n\t" + "movca.l r0, @%1\n\t" + "movca.l r0, @%2\n\t" + "movca.l r0, @%3\n\t" + "ocbi @%0\n\t" + "ocbi @%1\n\t" + "ocbi @%2\n\t" + "ocbi @%3\n\t" : : + "r" (a0), "r" (a1), "r" (a2), "r" (a3)); + asm volatile("ldc %0, sr" : : "r" (orig_sr)); + a0 += linesz; + a1 += linesz; + a2 += linesz; + a3 += linesz; + } while (a0 < a0e); +} diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index ad8ed7d41e1..045abdf078f 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -9,7 +9,6 @@ * for more details. * */ - #include <linux/init.h> #include <linux/mman.h> #include <linux/mm.h> @@ -25,14 +24,10 @@ #include <asm/mmu_context.h> #include <asm/cacheflush.h> -/* The 32KB cache on the SH7705 suffers from the same synonym problem - * as SH4 CPUs */ - -#define __pte_offset(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset(dir, address) ((pte_t *) pmd_page_kernel(*(dir)) + \ - __pte_offset(address)) - +/* + * The 32KB cache on the SH7705 suffers from the same synonym problem + * as SH4 CPUs + */ static inline void cache_wback_all(void) { unsigned long ways, waysize, addrstart; @@ -73,7 +68,6 @@ void flush_icache_range(unsigned long start, unsigned long end) __flush_wback_region((void *)start, end - start); } - /* * Writeback&Invalidate the D-cache of the page */ @@ -128,7 +122,6 @@ static void __flush_dcache_page(unsigned long phys) local_irq_restore(flags); } - /* * Write back & invalidate the D-cache of the page. * (To avoid "alias" issues) @@ -186,7 +179,8 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, * * ADDRESS: Virtual Address (U0 address) */ -void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn) +void flush_cache_page(struct vm_area_struct *vma, unsigned long address, + unsigned long pfn) { __flush_dcache_page(pfn << PAGE_SHIFT); } @@ -203,4 +197,3 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page) { __flush_purge_region(page_address(page), PAGE_SIZE); } - diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S index 08acead7b2a..7b96425ae27 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/mm/clear_page.S @@ -193,102 +193,5 @@ ENTRY(__clear_user_page) nop .L4096: .word 4096 -ENTRY(__flush_cache_4096) - mov.l 1f,r3 - add r6,r3 - mov r4,r0 - mov #64,r2 - shll r2 - mov #64,r6 - jmp @r3 - mov #96,r7 - .align 2 -1: .long 2f -2: - .rept 32 - mov.l r5,@r0 - mov.l r5,@(32,r0) - mov.l r5,@(r0,r6) - mov.l r5,@(r0,r7) - add r2,r5 - add r2,r0 - .endr - nop - nop - nop - nop - nop - nop - nop - rts - nop - -ENTRY(__flush_dcache_all) - mov.l 2f,r0 - mov.l 3f,r4 - and r0,r4 ! r4 = (unsigned long)&empty_zero_page[0] & ~0xffffc000 - stc sr,r1 ! save SR - mov.l 4f,r2 - or r1,r2 - mov #32,r3 - shll2 r3 -1: - ldc r2,sr ! set BL bit - movca.l r0,@r4 - ocbi @r4 - add #32,r4 - movca.l r0,@r4 - ocbi @r4 - add #32,r4 - movca.l r0,@r4 - ocbi @r4 - add #32,r4 - movca.l r0,@r4 - ocbi @r4 - ldc r1,sr ! restore SR - dt r3 - bf/s 1b - add #32,r4 - - rts - nop - .align 2 -2: .long 0xffffc000 -3: .long empty_zero_page -4: .long 0x10000000 ! BL bit - -/* __flush_cache_4096_all(unsigned long addr) */ -ENTRY(__flush_cache_4096_all) - mov.l 2f,r0 - mov.l 3f,r2 - and r0,r2 - or r2,r4 ! r4 = addr | (unsigned long)&empty_zero_page[0] & ~0x3fff - stc sr,r1 ! save SR - mov.l 4f,r2 - or r1,r2 - mov #32,r3 -1: - ldc r2,sr ! set BL bit - movca.l r0,@r4 - ocbi @r4 - add #32,r4 - movca.l r0,@r4 - ocbi @r4 - add #32,r4 - movca.l r0,@r4 - ocbi @r4 - add #32,r4 - movca.l r0,@r4 - ocbi @r4 - ldc r1,sr ! restore SR - dt r3 - bf/s 1b - add #32,r4 - - rts - nop - .align 2 -2: .long 0xffffc000 -3: .long empty_zero_page -4: .long 0x10000000 ! BL bit #endif + diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index ee73e30263a..c81e6b67ad3 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -9,6 +9,8 @@ */ #include <linux/mm.h> #include <linux/dma-mapping.h> +#include <asm/cacheflush.h> +#include <asm/addrspace.h> #include <asm/io.h> void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 775f86cd3fe..c69fd603226 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -1,33 +1,22 @@ -/* $Id: fault.c,v 1.14 2004/01/13 05:52:11 kkojima Exp $ +/* + * Page fault handler for SH with an MMU. * - * linux/arch/sh/mm/fault.c * Copyright (C) 1999 Niibe Yutaka * Copyright (C) 2003 Paul Mundt * * Based on linux/arch/i386/mm/fault.c: * Copyright (C) 1995 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - -#include <linux/signal.h> -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> #include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> -#include <linux/module.h> - +#include <linux/hardirq.h> +#include <linux/kprobes.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pgalloc.h> #include <asm/mmu_context.h> -#include <asm/cacheflush.h> #include <asm/kgdb.h> extern void die(const char *,struct pt_regs *,long); @@ -187,18 +176,30 @@ do_sigbus: goto no_context; } +#ifdef CONFIG_SH_STORE_QUEUES /* - * Called with interrupt disabled. + * This is a special case for the SH-4 store queues, as pages for this + * space still need to be faulted in before it's possible to flush the + * store queue cache for writeout to the remapped region. */ -asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess, - unsigned long address) +#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) +#else +#define P3_ADDR_MAX P4SEG +#endif + +/* + * Called with interrupts disabled. + */ +asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) { - unsigned long addrmax = P4SEG; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; pte_t entry; - struct mm_struct *mm; + struct mm_struct *mm = current->mm; spinlock_t *ptl; int ret = 1; @@ -207,31 +208,37 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess, kgdb_bus_err_hook(); #endif -#ifdef CONFIG_SH_STORE_QUEUES - addrmax = P4SEG_STORE_QUE + 0x04000000; -#endif - - if (address >= P3SEG && address < addrmax) { + /* + * We don't take page faults for P1, P2, and parts of P4, these + * are always mapped, whether it be due to legacy behaviour in + * 29-bit mode, or due to PMB configuration in 32-bit mode. + */ + if (address >= P3SEG && address < P3_ADDR_MAX) { pgd = pgd_offset_k(address); mm = NULL; - } else if (address >= TASK_SIZE) - return 1; - else if (!(mm = current->mm)) - return 1; - else + } else { + if (unlikely(address >= TASK_SIZE || !mm)) + return 1; + pgd = pgd_offset(mm, address); + } - pmd = pmd_offset(pgd, address); + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 1; + pmd = pmd_offset(pud, address); if (pmd_none_or_clear_bad(pmd)) return 1; + if (mm) pte = pte_offset_map_lock(mm, pmd, address, &ptl); else pte = pte_offset_kernel(pmd, address); entry = *pte; - if (pte_none(entry) || pte_not_present(entry) - || (writeaccess && !pte_write(entry))) + if (unlikely(pte_none(entry) || pte_not_present(entry))) + goto unlock; + if (unlikely(writeaccess && !pte_write(entry))) goto unlock; if (writeaccess) @@ -243,13 +250,7 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess, * ITLB is not affected by "ldtlb" instruction. * So, we need to flush the entry by ourselves. */ - - { - unsigned long flags; - local_irq_save(flags); - __flush_tlb_page(get_asid(), address&PAGE_MASK); - local_irq_restore(flags); - } + __flush_tlb_page(get_asid(), address & PAGE_MASK); #endif set_pte(pte, entry); @@ -260,121 +261,3 @@ unlock: pte_unmap_unlock(pte, ptl); return ret; } - -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) -{ - if (vma->vm_mm && vma->vm_mm->context != NO_CONTEXT) { - unsigned long flags; - unsigned long asid; - unsigned long saved_asid = MMU_NO_ASID; - - asid = vma->vm_mm->context & MMU_CONTEXT_ASID_MASK; - page &= PAGE_MASK; - - local_irq_save(flags); - if (vma->vm_mm != current->mm) { - saved_asid = get_asid(); - set_asid(asid); - } - __flush_tlb_page(asid, page); - if (saved_asid != MMU_NO_ASID) - set_asid(saved_asid); - local_irq_restore(flags); - } -} - -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - - if (mm->context != NO_CONTEXT) { - unsigned long flags; - int size; - - local_irq_save(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - mm->context = NO_CONTEXT; - if (mm == current->mm) - activate_context(mm); - } else { - unsigned long asid = mm->context&MMU_CONTEXT_ASID_MASK; - unsigned long saved_asid = MMU_NO_ASID; - - start &= PAGE_MASK; - end += (PAGE_SIZE - 1); - end &= PAGE_MASK; - if (mm != current->mm) { - saved_asid = get_asid(); - set_asid(asid); - } - while (start < end) { - __flush_tlb_page(asid, start); - start += PAGE_SIZE; - } - if (saved_asid != MMU_NO_ASID) - set_asid(saved_asid); - } - local_irq_restore(flags); - } -} - -void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - unsigned long flags; - int size; - - local_irq_save(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - flush_tlb_all(); - } else { - unsigned long asid = init_mm.context&MMU_CONTEXT_ASID_MASK; - unsigned long saved_asid = get_asid(); - - start &= PAGE_MASK; - end += (PAGE_SIZE - 1); - end &= PAGE_MASK; - set_asid(asid); - while (start < end) { - __flush_tlb_page(asid, start); - start += PAGE_SIZE; - } - set_asid(saved_asid); - } - local_irq_restore(flags); -} - -void flush_tlb_mm(struct mm_struct *mm) -{ - /* Invalidate all TLB of this process. */ - /* Instead of invalidating each TLB, we get new MMU context. */ - if (mm->context != NO_CONTEXT) { - unsigned long flags; - - local_irq_save(flags); - mm->context = NO_CONTEXT; - if (mm == current->mm) - activate_context(mm); - local_irq_restore(flags); - } -} - -void flush_tlb_all(void) -{ - unsigned long flags, status; - - /* - * Flush all the TLB. - * - * Write to the MMU control register's bit: - * TF-bit for SH-3, TI-bit for SH-4. - * It's same position, bit #2. - */ - local_irq_save(flags); - status = ctrl_inl(MMUCR); - status |= 0x04; - ctrl_outl(status, MMUCR); - local_irq_restore(flags); -} diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c index 2a85bc15a41..329059d6b54 100644 --- a/arch/sh/mm/hugetlbpage.c +++ b/arch/sh/mm/hugetlbpage.c @@ -26,61 +26,41 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte = NULL; pgd = pgd_offset(mm, addr); if (pgd) { - pmd = pmd_alloc(mm, pgd, addr); - if (pmd) - pte = pte_alloc_map(mm, pmd, addr); + pud = pud_alloc(mm, pgd, addr); + if (pud) { + pmd = pmd_alloc(mm, pud, addr); + if (pmd) + pte = pte_alloc_map(mm, pmd, addr); + } } + return pte; } pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte = NULL; pgd = pgd_offset(mm, addr); if (pgd) { - pmd = pmd_offset(pgd, addr); - if (pmd) - pte = pte_offset_map(pmd, addr); - } - return pte; -} - -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t entry) -{ - int i; - - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - set_pte_at(mm, addr, ptep, entry); - ptep++; - addr += PAGE_SIZE; - pte_val(entry) += PAGE_SIZE; + pud = pud_offset(pgd, addr); + if (pud) { + pmd = pmd_offset(pud, addr); + if (pmd) + pte = pte_offset_map(pmd, addr); + } } -} - -pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - pte_t entry; - int i; - - entry = *ptep; - for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { - pte_clear(mm, addr, ptep); - addr += PAGE_SIZE; - ptep++; - } - - return entry; + return pte; } struct page *follow_huge_addr(struct mm_struct *mm, diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 8ea27ca4b70..7154d1ce978 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -24,7 +24,7 @@ #include <linux/highmem.h> #include <linux/bootmem.h> #include <linux/pagemap.h> - +#include <linux/proc_fs.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -80,6 +80,7 @@ void show_mem(void) static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -89,7 +90,17 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) return; } - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (pud_none(*pud)) { + pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC); + set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER)); + if (pmd != pmd_offset(pud, 0)) { + pud_ERROR(*pud); + return; + } + } + + pmd = pmd_offset(pud, addr); if (pmd_none(*pmd)) { pte = (pte_t *)get_zeroed_page(GFP_ATOMIC); set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER)); @@ -212,6 +223,8 @@ void __init paging_init(void) free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); } +static struct kcore_list kcore_mem, kcore_vmalloc; + void __init mem_init(void) { extern unsigned long empty_zero_page[1024]; @@ -237,8 +250,13 @@ void __init mem_init(void) * Setup wrappers for copy/clear_page(), these will get overridden * later in the boot process if a better method is available. */ +#ifdef CONFIG_MMU copy_page = copy_page_slow; clear_page = clear_page_slow; +#else + copy_page = copy_page_nommu; + clear_page = clear_page_nommu; +#endif /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); @@ -254,7 +272,12 @@ void __init mem_init(void) datasize = (unsigned long) &_edata - (unsigned long) &_etext; initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n", + kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT); + kclist_add(&kcore_vmalloc, (void *)VMALLOC_START, + VMALLOC_END - VMALLOC_START); + + printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, " + "%dk reserved, %dk data, %dk init)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), max_mapnr << (PAGE_SHIFT-10), codesize >> 10, @@ -263,6 +286,9 @@ void __init mem_init(void) initsize >> 10); p3_cache_init(); + + /* Initialize the vDSO */ + vsyscall_init(); } void free_initmem(void) diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index 96fa4a999e2..a9fe80cfc23 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -15,6 +15,7 @@ #include <linux/vmalloc.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/pci.h> #include <asm/io.h> #include <asm/page.h> #include <asm/pgalloc.h> @@ -135,6 +136,20 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return (void __iomem *)phys_to_virt(phys_addr); /* + * If we're on an SH7751 or SH7780 PCI controller, PCI memory is + * mapped at the end of the address space (typically 0xfd000000) + * in a non-translatable area, so mapping through page tables for + * this area is not only pointless, but also fundamentally + * broken. Just return the physical address instead. + * + * For boards that map a small PCI memory aperture somewhere in + * P1/P2 space, ioremap() will already do the right thing, + * and we'll never get this far. + */ + if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) + return (void __iomem *)phys_addr; + + /* * Don't allow anybody to remap normal RAM that we're using.. */ if (phys_addr < virt_to_phys(high_memory)) @@ -192,7 +207,7 @@ void __iounmap(void __iomem *addr) unsigned long vaddr = (unsigned long __force)addr; struct vm_struct *p; - if (PXSEG(vaddr) < P3SEG) + if (PXSEG(vaddr) < P3SEG || is_pci_memaddr(vaddr)) return; #ifdef CONFIG_32BIT diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c index 8f9165a4e33..d15221beaa1 100644 --- a/arch/sh/mm/pg-nommu.c +++ b/arch/sh/mm/pg-nommu.c @@ -14,23 +14,24 @@ #include <linux/string.h> #include <asm/page.h> -static void copy_page_nommu(void *to, void *from) +void copy_page_nommu(void *to, void *from) { memcpy(to, from, PAGE_SIZE); } -static void clear_page_nommu(void *to) +void clear_page_nommu(void *to) { memset(to, 0, PAGE_SIZE); } -static int __init pg_nommu_init(void) +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n) { - copy_page = copy_page_nommu; - clear_page = clear_page_nommu; - + memcpy(to, from, n); return 0; } -subsys_initcall(pg_nommu_init); - +__kernel_size_t __clear_user(void *to, __kernel_size_t n) +{ + memset(to, 0, n); + return 0; +} diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index c776b60fc25..07371ed7a31 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -2,7 +2,7 @@ * arch/sh/mm/pg-sh4.c * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2002 Paul Mundt + * Copyright (C) 2002 - 2005 Paul Mundt * * Released under the terms of the GNU GPL v2.0. */ @@ -23,6 +23,8 @@ extern struct semaphore p3map_sem[]; +#define CACHE_ALIAS (cpu_data->dcache.alias_mask) + /* * clear_user_page * @to: P1 address @@ -35,14 +37,15 @@ void clear_user_page(void *to, unsigned long address, struct page *page) if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) clear_page(to); else { - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | + pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | - _PAGE_DIRTY | _PAGE_ACCESSED | + _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); unsigned long phys_addr = PHYSADDR(to); unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); - pgd_t *dir = pgd_offset_k(p3_addr); - pmd_t *pmd = pmd_offset(dir, p3_addr); + pgd_t *pgd = pgd_offset_k(p3_addr); + pud_t *pud = pud_offset(pgd, p3_addr); + pmd_t *pmd = pmd_offset(pud, p3_addr); pte_t *pte = pte_offset_kernel(pmd, p3_addr); pte_t entry; unsigned long flags; @@ -67,21 +70,22 @@ void clear_user_page(void *to, unsigned long address, struct page *page) * @address: U0 address to be mapped * @page: page (virt_to_page(to)) */ -void copy_user_page(void *to, void *from, unsigned long address, +void copy_user_page(void *to, void *from, unsigned long address, struct page *page) { __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) copy_page(to, from); else { - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | + pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | - _PAGE_DIRTY | _PAGE_ACCESSED | + _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); unsigned long phys_addr = PHYSADDR(to); unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); - pgd_t *dir = pgd_offset_k(p3_addr); - pmd_t *pmd = pmd_offset(dir, p3_addr); + pgd_t *pgd = pgd_offset_k(p3_addr); + pud_t *pud = pud_offset(pgd, p3_addr); + pmd_t *pmd = pmd_offset(pud, p3_addr); pte_t *pte = pte_offset_kernel(pmd, p3_addr); pte_t entry; unsigned long flags; diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c new file mode 100644 index 00000000000..92e745341e4 --- /dev/null +++ b/arch/sh/mm/pmb.c @@ -0,0 +1,400 @@ +/* + * arch/sh/mm/pmb.c + * + * Privileged Space Mapping Buffer (PMB) Support. + * + * Copyright (C) 2005, 2006 Paul Mundt + * + * P1/P2 Section mapping definitions from map32.h, which was: + * + * Copyright 2003 (c) Lineo Solutions,Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/debugfs.h> +#include <linux/fs.h> +#include <linux/seq_file.h> +#include <linux/err.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/mmu.h> +#include <asm/io.h> + +#define NR_PMB_ENTRIES 16 + +static kmem_cache_t *pmb_cache; +static unsigned long pmb_map; + +static struct pmb_entry pmb_init_map[] = { + /* vpn ppn flags (ub/sz/c/wt) */ + + /* P1 Section Mappings */ + { 0x80000000, 0x00000000, PMB_SZ_64M | PMB_C, }, + { 0x84000000, 0x04000000, PMB_SZ_64M | PMB_C, }, + { 0x88000000, 0x08000000, PMB_SZ_128M | PMB_C, }, + { 0x90000000, 0x10000000, PMB_SZ_64M | PMB_C, }, + { 0x94000000, 0x14000000, PMB_SZ_64M | PMB_C, }, + { 0x98000000, 0x18000000, PMB_SZ_64M | PMB_C, }, + + /* P2 Section Mappings */ + { 0xa0000000, 0x00000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, + { 0xa4000000, 0x04000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, + { 0xa8000000, 0x08000000, PMB_UB | PMB_SZ_128M | PMB_WT, }, + { 0xb0000000, 0x10000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, + { 0xb4000000, 0x14000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, + { 0xb8000000, 0x18000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, +}; + +static inline unsigned long mk_pmb_entry(unsigned int entry) +{ + return (entry & PMB_E_MASK) << PMB_E_SHIFT; +} + +static inline unsigned long mk_pmb_addr(unsigned int entry) +{ + return mk_pmb_entry(entry) | PMB_ADDR; +} + +static inline unsigned long mk_pmb_data(unsigned int entry) +{ + return mk_pmb_entry(entry) | PMB_DATA; +} + +struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, + unsigned long flags) +{ + struct pmb_entry *pmbe; + + pmbe = kmem_cache_alloc(pmb_cache, GFP_KERNEL); + if (!pmbe) + return ERR_PTR(-ENOMEM); + + pmbe->vpn = vpn; + pmbe->ppn = ppn; + pmbe->flags = flags; + + return pmbe; +} + +void pmb_free(struct pmb_entry *pmbe) +{ + kmem_cache_free(pmb_cache, pmbe); +} + +/* + * Must be in P2 for __set_pmb_entry() + */ +int __set_pmb_entry(unsigned long vpn, unsigned long ppn, + unsigned long flags, int *entry) +{ + unsigned int pos = *entry; + + if (unlikely(pos == PMB_NO_ENTRY)) + pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES); + +repeat: + if (unlikely(pos > NR_PMB_ENTRIES)) + return -ENOSPC; + + if (test_and_set_bit(pos, &pmb_map)) { + pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES); + goto repeat; + } + + ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos)); + +#ifdef CONFIG_SH_WRITETHROUGH + /* + * When we are in 32-bit address extended mode, CCR.CB becomes + * invalid, so care must be taken to manually adjust cacheable + * translations. + */ + if (likely(flags & PMB_C)) + flags |= PMB_WT; +#endif + + ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos)); + + *entry = pos; + + return 0; +} + +int set_pmb_entry(struct pmb_entry *pmbe) +{ + int ret; + + jump_to_P2(); + ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry); + back_to_P1(); + + return ret; +} + +void clear_pmb_entry(struct pmb_entry *pmbe) +{ + unsigned int entry = pmbe->entry; + unsigned long addr; + + /* + * Don't allow clearing of wired init entries, P1 or P2 access + * without a corresponding mapping in the PMB will lead to reset + * by the TLB. + */ + if (unlikely(entry < ARRAY_SIZE(pmb_init_map) || + entry >= NR_PMB_ENTRIES)) + return; + + jump_to_P2(); + + /* Clear V-bit */ + addr = mk_pmb_addr(entry); + ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr); + + addr = mk_pmb_data(entry); + ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr); + + back_to_P1(); + + clear_bit(entry, &pmb_map); +} + +static DEFINE_SPINLOCK(pmb_list_lock); +static struct pmb_entry *pmb_list; + +static inline void pmb_list_add(struct pmb_entry *pmbe) +{ + struct pmb_entry **p, *tmp; + + p = &pmb_list; + while ((tmp = *p) != NULL) + p = &tmp->next; + + pmbe->next = tmp; + *p = pmbe; +} + +static inline void pmb_list_del(struct pmb_entry *pmbe) +{ + struct pmb_entry **p, *tmp; + + for (p = &pmb_list; (tmp = *p); p = &tmp->next) + if (tmp == pmbe) { + *p = tmp->next; + return; + } +} + +static struct { + unsigned long size; + int flag; +} pmb_sizes[] = { + { .size = 0x20000000, .flag = PMB_SZ_512M, }, + { .size = 0x08000000, .flag = PMB_SZ_128M, }, + { .size = 0x04000000, .flag = PMB_SZ_64M, }, + { .size = 0x01000000, .flag = PMB_SZ_16M, }, +}; + +long pmb_remap(unsigned long vaddr, unsigned long phys, + unsigned long size, unsigned long flags) +{ + struct pmb_entry *pmbp; + unsigned long wanted; + int pmb_flags, i; + + /* Convert typical pgprot value to the PMB equivalent */ + if (flags & _PAGE_CACHABLE) { + if (flags & _PAGE_WT) + pmb_flags = PMB_WT; + else + pmb_flags = PMB_C; + } else + pmb_flags = PMB_WT | PMB_UB; + + pmbp = NULL; + wanted = size; + +again: + for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) { + struct pmb_entry *pmbe; + int ret; + + if (size < pmb_sizes[i].size) + continue; + + pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag); + if (IS_ERR(pmbe)) + return PTR_ERR(pmbe); + + ret = set_pmb_entry(pmbe); + if (ret != 0) { + pmb_free(pmbe); + return -EBUSY; + } + + phys += pmb_sizes[i].size; + vaddr += pmb_sizes[i].size; + size -= pmb_sizes[i].size; + + /* + * Link adjacent entries that span multiple PMB entries + * for easier tear-down. + */ + if (likely(pmbp)) + pmbp->link = pmbe; + + pmbp = pmbe; + } + + if (size >= 0x1000000) + goto again; + + return wanted - size; +} + +void pmb_unmap(unsigned long addr) +{ + struct pmb_entry **p, *pmbe; + + for (p = &pmb_list; (pmbe = *p); p = &pmbe->next) + if (pmbe->vpn == addr) + break; + + if (unlikely(!pmbe)) + return; + + WARN_ON(!test_bit(pmbe->entry, &pmb_map)); + + do { + struct pmb_entry *pmblink = pmbe; + + clear_pmb_entry(pmbe); + pmbe = pmblink->link; + + pmb_free(pmblink); + } while (pmbe); +} + +static void pmb_cache_ctor(void *pmb, kmem_cache_t *cachep, unsigned long flags) +{ + struct pmb_entry *pmbe = pmb; + + memset(pmb, 0, sizeof(struct pmb_entry)); + + spin_lock_irq(&pmb_list_lock); + + pmbe->entry = PMB_NO_ENTRY; + pmb_list_add(pmbe); + + spin_unlock_irq(&pmb_list_lock); +} + +static void pmb_cache_dtor(void *pmb, kmem_cache_t *cachep, unsigned long flags) +{ + spin_lock_irq(&pmb_list_lock); + pmb_list_del(pmb); + spin_unlock_irq(&pmb_list_lock); +} + +static int __init pmb_init(void) +{ + unsigned int nr_entries = ARRAY_SIZE(pmb_init_map); + unsigned int entry; + + BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES)); + + pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), + 0, 0, pmb_cache_ctor, pmb_cache_dtor); + BUG_ON(!pmb_cache); + + jump_to_P2(); + + /* + * Ordering is important, P2 must be mapped in the PMB before we + * can set PMB.SE, and P1 must be mapped before we jump back to + * P1 space. + */ + for (entry = 0; entry < nr_entries; entry++) { + struct pmb_entry *pmbe = pmb_init_map + entry; + + __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &entry); + } + + ctrl_outl(0, PMB_IRMCR); + + /* PMB.SE and UB[7] */ + ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR); + + back_to_P1(); + + return 0; +} +arch_initcall(pmb_init); + +static int pmb_seq_show(struct seq_file *file, void *iter) +{ + int i; + + seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n" + "CB: Copy-Back, B: Buffered, UB: Unbuffered\n"); + seq_printf(file, "ety vpn ppn size flags\n"); + + for (i = 0; i < NR_PMB_ENTRIES; i++) { + unsigned long addr, data; + unsigned int size; + char *sz_str = NULL; + + addr = ctrl_inl(mk_pmb_addr(i)); + data = ctrl_inl(mk_pmb_data(i)); + + size = data & PMB_SZ_MASK; + sz_str = (size == PMB_SZ_16M) ? " 16MB": + (size == PMB_SZ_64M) ? " 64MB": + (size == PMB_SZ_128M) ? "128MB": + "512MB"; + + /* 02: V 0x88 0x08 128MB C CB B */ + seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n", + i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ', + (addr >> 24) & 0xff, (data >> 24) & 0xff, + sz_str, (data & PMB_C) ? 'C' : ' ', + (data & PMB_WT) ? "WT" : "CB", + (data & PMB_UB) ? "UB" : " B"); + } + + return 0; +} + +static int pmb_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, pmb_seq_show, NULL); +} + +static struct file_operations pmb_debugfs_fops = { + .owner = THIS_MODULE, + .open = pmb_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init pmb_debugfs_init(void) +{ + struct dentry *dentry; + + dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO, + NULL, NULL, &pmb_debugfs_fops); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + + return 0; +} +postcore_initcall(pmb_debugfs_init); diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c new file mode 100644 index 00000000000..73ec7f6084f --- /dev/null +++ b/arch/sh/mm/tlb-flush.c @@ -0,0 +1,134 @@ +/* + * TLB flushing operations for SH with an MMU. + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/mm.h> +#include <asm/mmu_context.h> +#include <asm/tlbflush.h> + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + if (vma->vm_mm && vma->vm_mm->context.id != NO_CONTEXT) { + unsigned long flags; + unsigned long asid; + unsigned long saved_asid = MMU_NO_ASID; + + asid = vma->vm_mm->context.id & MMU_CONTEXT_ASID_MASK; + page &= PAGE_MASK; + + local_irq_save(flags); + if (vma->vm_mm != current->mm) { + saved_asid = get_asid(); + set_asid(asid); + } + __flush_tlb_page(asid, page); + if (saved_asid != MMU_NO_ASID) + set_asid(saved_asid); + local_irq_restore(flags); + } +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + if (mm->context.id != NO_CONTEXT) { + unsigned long flags; + int size; + + local_irq_save(flags); + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ + mm->context.id = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm); + } else { + unsigned long asid; + unsigned long saved_asid = MMU_NO_ASID; + + asid = mm->context.id & MMU_CONTEXT_ASID_MASK; + start &= PAGE_MASK; + end += (PAGE_SIZE - 1); + end &= PAGE_MASK; + if (mm != current->mm) { + saved_asid = get_asid(); + set_asid(asid); + } + while (start < end) { + __flush_tlb_page(asid, start); + start += PAGE_SIZE; + } + if (saved_asid != MMU_NO_ASID) + set_asid(saved_asid); + } + local_irq_restore(flags); + } +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + int size; + + local_irq_save(flags); + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ + flush_tlb_all(); + } else { + unsigned long asid; + unsigned long saved_asid = get_asid(); + + asid = init_mm.context.id & MMU_CONTEXT_ASID_MASK; + start &= PAGE_MASK; + end += (PAGE_SIZE - 1); + end &= PAGE_MASK; + set_asid(asid); + while (start < end) { + __flush_tlb_page(asid, start); + start += PAGE_SIZE; + } + set_asid(saved_asid); + } + local_irq_restore(flags); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + /* Invalidate all TLB of this process. */ + /* Instead of invalidating each TLB, we get new MMU context. */ + if (mm->context.id != NO_CONTEXT) { + unsigned long flags; + + local_irq_save(flags); + mm->context.id = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm); + local_irq_restore(flags); + } +} + +void flush_tlb_all(void) +{ + unsigned long flags, status; + + /* + * Flush all the TLB. + * + * Write to the MMU control register's bit: + * TF-bit for SH-3, TI-bit for SH-4. + * It's same position, bit #2. + */ + local_irq_save(flags); + status = ctrl_inl(MMUCR); + status |= 0x04; + ctrl_outl(status, MMUCR); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 115b1b6be40..812b2d567de 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -36,7 +36,6 @@ void update_mmu_cache(struct vm_area_struct * vma, unsigned long vpn; struct page *page; unsigned long pfn; - unsigned long ptea; /* Ptrace may call this routine. */ if (vma && current->active_mm != vma->vm_mm) @@ -59,10 +58,11 @@ void update_mmu_cache(struct vm_area_struct * vma, ctrl_outl(vpn, MMU_PTEH); pteval = pte_val(pte); + /* Set PTEA register */ - /* TODO: make this look less hacky */ - ptea = ((pteval >> 28) & 0xe) | (pteval & 0x1); - ctrl_outl(ptea, MMU_PTEA); + if (cpu_data->flags & CPU_HAS_PTEA) + /* TODO: make this look less hacky */ + ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); /* Set PTEL register */ pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile index 686738d4aa3..1f25d9bb753 100644 --- a/arch/sh/oprofile/Makefile +++ b/arch/sh/oprofile/Makefile @@ -7,7 +7,11 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) profdrvr-y := op_model_null.o + +# SH7750-style performance counters exist across 7750/7750S and 7091. +profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750S) := op_model_sh7750.o profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750) := op_model_sh7750.o +profdrvr-$(CONFIG_CPU_SUBTYPE_SH7091) := op_model_sh7750.o oprofile-y := $(DRIVER_OBJS) $(profdrvr-y) diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 182fe909257..ac57638977e 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -8,16 +8,15 @@ SE SH_SOLUTION_ENGINE 7751SE SH_7751_SOLUTION_ENGINE 7300SE SH_7300_SOLUTION_ENGINE +7343SE SH_7343_SOLUTION_ENGINE 73180SE SH_73180_SOLUTION_ENGINE 7751SYSTEMH SH_7751_SYSTEMH HP6XX SH_HP6XX HD64461 HD64461 HD64465 HD64465 -SH2000 SH_SH2000 SATURN SH_SATURN DREAMCAST SH_DREAMCAST BIGSUR SH_BIGSUR -ADX SH_ADX MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 HS7751RVOIP SH_HS7751RVOIP @@ -25,4 +24,9 @@ RTS7751R2D SH_RTS7751R2D EDOSK7705 SH_EDOSK7705 SH4202_MICRODEV SH_SH4202_MICRODEV SH03 SH_SH03 - +LANDISK SH_LANDISK +R7780RP SH_R7780RP +R7780MP SH_R7780MP +TITAN SH_TITAN +SHMIN SH_SHMIN +7710VOIPGW SH_7710VOIPGW diff --git a/arch/sh64/mm/init.c b/arch/sh64/mm/init.c index 1169757fb38..83295bd21aa 100644 --- a/arch/sh64/mm/init.c +++ b/arch/sh64/mm/init.c @@ -110,7 +110,7 @@ void show_mem(void) */ void __init paging_init(void) { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; pgd_init((unsigned long)swapper_pg_dir); pgd_init((unsigned long)swapper_pg_dir + diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 16e13f663ab..b27a506309e 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -2175,7 +2175,7 @@ void __init ld_mmu_srmmu(void) BTFIXUPSET_CALL(pte_pfn, srmmu_pte_pfn, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(pgd_page, srmmu_pgd_page, BTFIXUPCALL_NORM); + BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM); BTFIXUPSET_SETHI(none_mask, 0xF0000000); diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c index 7fdddf3c7e1..436021ceb2e 100644 --- a/arch/sparc/mm/sun4c.c +++ b/arch/sparc/mm/sun4c.c @@ -2280,5 +2280,5 @@ void __init ld_mmu_sun4c(void) /* These should _never_ get called with two level tables. */ BTFIXUPSET_CALL(pgd_set, sun4c_pgd_set, BTFIXUPCALL_NOP); - BTFIXUPSET_CALL(pgd_page, sun4c_pgd_page, BTFIXUPCALL_RETO0); + BTFIXUPSET_CALL(pgd_page_vaddr, sun4c_pgd_page, BTFIXUPCALL_RETO0); } diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 51cf6027b70..0fbdaa5daa8 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.18 -# Sat Sep 23 18:32:19 2006 +# Tue Sep 26 23:09:35 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -141,6 +141,7 @@ CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_COMPAT=y @@ -194,21 +195,9 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y -CONFIG_TCP_CONG_ADVANCED=y - -# -# TCP congestion control -# -CONFIG_TCP_CONG_BIC=y -CONFIG_TCP_CONG_CUBIC=m -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -247,6 +236,7 @@ CONFIG_IP_DCCP_TFRC_LIB=m # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set +# CONFIG_NET_DCCPPROBE is not set # # SCTP Configuration (EXPERIMENTAL) @@ -401,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -422,12 +413,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -440,16 +432,18 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -462,6 +456,11 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_SUNESP is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # CONFIG_MD=y @@ -575,6 +574,7 @@ CONFIG_E1000_NAPI=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m CONFIG_BNX2=m +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -1006,6 +1006,7 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set # # USB devices @@ -1353,6 +1354,7 @@ CONFIG_KPROBES=y # Kernel hacking # CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index c88ae23ce81..69444f266e2 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -1016,7 +1016,7 @@ struct __sysctl_args32 { asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) { -#ifndef CONFIG_SYSCTL +#ifndef CONFIG_SYSCTL_SYSCALL return -ENOSYS; #else struct __sysctl_args32 tmp; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index dcba4e6ab57..09cb7fccc03 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -920,8 +920,7 @@ static unsigned long __init bootmem_init(unsigned long *pages_avail, if (sparc_ramdisk_image || sparc_ramdisk_image64) { unsigned long ramdisk_image = sparc_ramdisk_image ? sparc_ramdisk_image : sparc_ramdisk_image64; - if (ramdisk_image >= (unsigned long)_end - 2 * PAGE_SIZE) - ramdisk_image -= KERNBASE; + ramdisk_image -= KERNBASE; initrd_start = ramdisk_image + phys_base; initrd_end = initrd_start + sparc_ramdisk_size; if (initrd_end > end_of_phys_memory) { diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c index 8135ec322c9..642541769a1 100644 --- a/arch/sparc64/solaris/misc.c +++ b/arch/sparc64/solaris/misc.c @@ -736,20 +736,15 @@ struct exec_domain solaris_exec_domain = { extern int init_socksys(void); -#ifdef MODULE - MODULE_AUTHOR("Jakub Jelinek (jj@ultra.linux.cz), Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)"); MODULE_DESCRIPTION("Solaris binary emulation module"); MODULE_LICENSE("GPL"); -#ifdef __sparc_v9__ extern u32 tl0_solaris[8]; #define update_ttable(x) \ tl0_solaris[3] = (((long)(x) - (long)tl0_solaris - 3) >> 2) | 0x40000000; \ wmb(); \ __asm__ __volatile__ ("flush %0" : : "r" (&tl0_solaris[3])) -#else -#endif extern u32 solaris_sparc_syscall[]; extern u32 solaris_syscall[]; @@ -757,7 +752,7 @@ extern void cleanup_socksys(void); extern u32 entry64_personality_patch; -int init_module(void) +static int __init solaris_init(void) { int ret; @@ -777,19 +772,12 @@ int init_module(void) return 0; } -void cleanup_module(void) +static void __exit solaris_exit(void) { update_ttable(solaris_syscall); cleanup_socksys(); unregister_exec_domain(&solaris_exec_domain); } -#else -int init_solaris_emul(void) -{ - register_exec_domain(&solaris_exec_domain); - init_socksys(); - return 0; -} -#endif - +module_init(solaris_init); +module_exit(solaris_exit); diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c index bc3df95bc05..7c90e41fd3b 100644 --- a/arch/sparc64/solaris/socksys.c +++ b/arch/sparc64/solaris/socksys.c @@ -168,8 +168,7 @@ static struct file_operations socksys_fops = { .release = socksys_release, }; -int __init -init_socksys(void) +int __init init_socksys(void) { int ret; struct file * file; @@ -199,8 +198,7 @@ init_socksys(void) return 0; } -void -cleanup_socksys(void) +void __exit cleanup_socksys(void) { if (unregister_chrdev(30, "socksys")) printk ("Couldn't unregister socksys character device\n"); diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64 index 9558a7cf34d..11154b6773e 100644 --- a/arch/um/Makefile-x86_64 +++ b/arch/um/Makefile-x86_64 @@ -4,10 +4,13 @@ core-y += arch/um/sys-x86_64/ START := 0x60000000 +_extra_flags_ = -fno-builtin -m64 -mcmodel=kernel + #We #undef __x86_64__ for kernelspace, not for userspace where #it's needed for headers to work! -CFLAGS += -U__$(SUBARCH)__ -fno-builtin -m64 -USER_CFLAGS += -fno-builtin -m64 +CFLAGS += -U__$(SUBARCH)__ $(_extra_flags_) +USER_CFLAGS += $(_extra_flags_) + CHECKFLAGS += -m64 AFLAGS += -m64 LDFLAGS += -m elf_x86_64 diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 7218c754505..3576b3cc505 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -110,7 +110,7 @@ static void not_configged_free(void *data) "UML\n"); } -static struct chan_ops not_configged_ops = { +static const struct chan_ops not_configged_ops = { .init = not_configged_init, .open = not_configged_open, .close = not_configged_close, @@ -373,7 +373,7 @@ int console_write_chan(struct list_head *chans, const char *buf, int len) } int console_open_chan(struct line *line, struct console *co, - struct chan_opts *opts) + const struct chan_opts *opts) { int err; @@ -494,10 +494,10 @@ int chan_config_string(struct list_head *chans, char *str, int size, struct chan_type { char *key; - struct chan_ops *ops; + const struct chan_ops *ops; }; -static struct chan_type chan_table[] = { +static const struct chan_type chan_table[] = { { "fd", &fd_ops }, #ifdef CONFIG_NULL_CHAN @@ -534,17 +534,17 @@ static struct chan_type chan_table[] = { }; static struct chan *parse_chan(struct line *line, char *str, int device, - struct chan_opts *opts) + const struct chan_opts *opts) { - struct chan_type *entry; - struct chan_ops *ops; + const struct chan_type *entry; + const struct chan_ops *ops; struct chan *chan; void *data; int i; ops = NULL; data = NULL; - for(i = 0; i < sizeof(chan_table)/sizeof(chan_table[0]); i++){ + for(i = 0; i < ARRAY_SIZE(chan_table); i++){ entry = &chan_table[i]; if(!strncmp(str, entry->key, strlen(entry->key))){ ops = entry->ops; @@ -582,7 +582,7 @@ static struct chan *parse_chan(struct line *line, char *str, int device, } int parse_chan_pair(char *str, struct line *line, int device, - struct chan_opts *opts) + const struct chan_opts *opts) { struct list_head *chans = &line->chan_list; struct chan *new, *chan; diff --git a/arch/um/drivers/daemon.h b/arch/um/drivers/daemon.h index 7326c42f7ef..3bc3cf6b94a 100644 --- a/arch/um/drivers/daemon.h +++ b/arch/um/drivers/daemon.h @@ -18,7 +18,7 @@ struct daemon_data { void *dev; }; -extern struct net_user_info daemon_user_info; +extern const struct net_user_info daemon_user_info; extern int daemon_user_write(int fd, void *buf, int len, struct daemon_data *pri); diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c index 53d09ed78b4..824386974f8 100644 --- a/arch/um/drivers/daemon_kern.c +++ b/arch/um/drivers/daemon_kern.c @@ -57,7 +57,7 @@ static int daemon_write(int fd, struct sk_buff **skb, (struct daemon_data *) &lp->user)); } -static struct net_kern_info daemon_kern_info = { +static const struct net_kern_info daemon_kern_info = { .init = daemon_init, .protocol = eth_protocol, .read = daemon_read, diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c index c944265955e..77954ea7704 100644 --- a/arch/um/drivers/daemon_user.c +++ b/arch/um/drivers/daemon_user.c @@ -182,7 +182,7 @@ static int daemon_set_mtu(int mtu, void *data) return(mtu); } -struct net_user_info daemon_user_info = { +const struct net_user_info daemon_user_info = { .init = daemon_user_init, .open = daemon_open, .close = NULL, diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c index c41f75e4acb..108b7dafbd0 100644 --- a/arch/um/drivers/fd.c +++ b/arch/um/drivers/fd.c @@ -20,7 +20,7 @@ struct fd_chan { char str[sizeof("1234567890\0")]; }; -static void *fd_init(char *str, int device, struct chan_opts *opts) +static void *fd_init(char *str, int device, const struct chan_opts *opts) { struct fd_chan *data; char *end; @@ -77,7 +77,7 @@ static void fd_close(int fd, void *d) } } -struct chan_ops fd_ops = { +const struct chan_ops fd_ops = { .type = "fd", .init = fd_init, .open = fd_open, diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index 37232f908cd..d247ef45c37 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -280,7 +280,7 @@ static int hostmixer_release(struct inode *inode, struct file *file) /* kernel module operations */ -static struct file_operations hostaudio_fops = { +static const struct file_operations hostaudio_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .read = hostaudio_read, @@ -292,7 +292,7 @@ static struct file_operations hostaudio_fops = { .release = hostaudio_release, }; -static struct file_operations hostmixer_fops = { +static const struct file_operations hostmixer_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .ioctl = hostmixer_ioctl_mixdev, diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index ebebaabb78a..563ce7690a1 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -251,7 +251,7 @@ void line_set_termios(struct tty_struct *tty, struct termios * old) /* nothing */ } -static struct { +static const struct { int cmd; char *level; char *name; @@ -405,7 +405,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data, int line_setup_irq(int fd, int input, int output, struct line *line, void *data) { - struct line_driver *driver = line->driver; + const struct line_driver *driver = line->driver; int err = 0, flags = IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM; if (input) @@ -558,7 +558,7 @@ int line_setup(struct line *lines, unsigned int num, char *init) } int line_config(struct line *lines, unsigned int num, char *str, - struct chan_opts *opts) + const struct chan_opts *opts) { struct line *line; char *new; diff --git a/arch/um/drivers/mcast.h b/arch/um/drivers/mcast.h index a2c6db24345..bc56af9d3e5 100644 --- a/arch/um/drivers/mcast.h +++ b/arch/um/drivers/mcast.h @@ -13,7 +13,7 @@ struct mcast_data { void *dev; }; -extern struct net_user_info mcast_user_info; +extern const struct net_user_info mcast_user_info; extern int mcast_user_write(int fd, void *buf, int len, struct mcast_data *pri); diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c index 3a7af18cf94..c090fbd464e 100644 --- a/arch/um/drivers/mcast_kern.c +++ b/arch/um/drivers/mcast_kern.c @@ -61,7 +61,7 @@ static int mcast_write(int fd, struct sk_buff **skb, (struct mcast_data *) &lp->user); } -static struct net_kern_info mcast_kern_info = { +static const struct net_kern_info mcast_kern_info = { .init = mcast_init, .protocol = eth_protocol, .read = mcast_read, diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index afe85bfa66e..4d2bd39a85b 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -152,7 +152,7 @@ static int mcast_set_mtu(int mtu, void *data) return(mtu); } -struct net_user_info mcast_user_info = { +const struct net_user_info mcast_user_info = { .init = mcast_user_init, .open = mcast_open, .close = mcast_close, diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index b414522f768..79610b5ce67 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -497,7 +497,7 @@ static void mconsole_get_config(int (*get_config)(char *, char *, int, } error = NULL; - size = sizeof(default_buf)/sizeof(default_buf[0]); + size = ARRAY_SIZE(default_buf); buf = default_buf; while(1){ diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c index 9bfd405c3bd..5b2f5fe9e42 100644 --- a/arch/um/drivers/mconsole_user.c +++ b/arch/um/drivers/mconsole_user.c @@ -16,6 +16,7 @@ #include "user.h" #include "mconsole.h" #include "umid.h" +#include "user_util.h" static struct mconsole_command commands[] = { /* With uts namespaces, uts information becomes process-specific, so @@ -65,14 +66,14 @@ static struct mconsole_command *mconsole_parse(struct mc_request *req) struct mconsole_command *cmd; int i; - for(i=0;i<sizeof(commands)/sizeof(commands[0]);i++){ + for(i = 0; i < ARRAY_SIZE(commands); i++){ cmd = &commands[i]; if(!strncmp(req->request.data, cmd->command, strlen(cmd->command))){ - return(cmd); + return cmd; } } - return(NULL); + return NULL; } #define MIN(a,b) ((a)<(b) ? (a):(b)) diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c index 022f67bb687..9a3b5daf625 100644 --- a/arch/um/drivers/mmapper_kern.c +++ b/arch/um/drivers/mmapper_kern.c @@ -85,7 +85,7 @@ mmapper_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations mmapper_fops = { +static const struct file_operations mmapper_fops = { .owner = THIS_MODULE, .read = mmapper_read, .write = mmapper_write, @@ -95,7 +95,7 @@ static struct file_operations mmapper_fops = { .release = mmapper_release, }; -static struct miscdevice mmapper_dev = { +static const struct miscdevice mmapper_dev = { .minor = MISC_DYNAMIC_MINOR, .name = "mmapper", .fops = &mmapper_fops diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 501f95675d8..664c2e2fb82 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -31,6 +31,11 @@ #include "irq_user.h" #include "irq_kern.h" +static inline void set_ether_mac(struct net_device *dev, unsigned char *addr) +{ + memcpy(dev->dev_addr, addr, ETH_ALEN); +} + #define DRIVER_NAME "uml-netdev" static DEFINE_SPINLOCK(opened_lock); @@ -109,8 +114,6 @@ static int uml_net_open(struct net_device *dev) struct uml_net_private *lp = dev->priv; int err; - spin_lock(&lp->lock); - if(lp->fd >= 0){ err = -ENXIO; goto out; @@ -144,8 +147,6 @@ static int uml_net_open(struct net_device *dev) */ while((err = uml_net_rx(dev)) > 0) ; - spin_unlock(&lp->lock); - spin_lock(&opened_lock); list_add(&lp->list, &opened); spin_unlock(&opened_lock); @@ -155,7 +156,6 @@ out_close: if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user); lp->fd = -1; out: - spin_unlock(&lp->lock); return err; } @@ -164,15 +164,12 @@ static int uml_net_close(struct net_device *dev) struct uml_net_private *lp = dev->priv; netif_stop_queue(dev); - spin_lock(&lp->lock); free_irq(dev->irq, dev); if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user); lp->fd = -1; - spin_unlock(&lp->lock); - spin_lock(&opened_lock); list_del(&lp->list); spin_unlock(&opened_lock); @@ -241,9 +238,9 @@ static int uml_net_set_mac(struct net_device *dev, void *addr) struct uml_net_private *lp = dev->priv; struct sockaddr *hwaddr = addr; - spin_lock(&lp->lock); - memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN); - spin_unlock(&lp->lock); + spin_lock_irq(&lp->lock); + set_ether_mac(dev, hwaddr->sa_data); + spin_unlock_irq(&lp->lock); return(0); } @@ -253,7 +250,7 @@ static int uml_net_change_mtu(struct net_device *dev, int new_mtu) struct uml_net_private *lp = dev->priv; int err = 0; - spin_lock(&lp->lock); + spin_lock_irq(&lp->lock); new_mtu = (*lp->set_mtu)(new_mtu, &lp->user); if(new_mtu < 0){ @@ -264,7 +261,7 @@ static int uml_net_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; out: - spin_unlock(&lp->lock); + spin_unlock_irq(&lp->lock); return err; } @@ -564,12 +561,13 @@ static int eth_setup(char *str) int n, err; err = eth_parse(str, &n, &str); - if(err) return(1); + if(err) + return 1; - new = alloc_bootmem(sizeof(new)); + new = alloc_bootmem(sizeof(*new)); if (new == NULL){ printk("eth_init : alloc_bootmem failed\n"); - return(1); + return 1; } INIT_LIST_HEAD(&new->list); @@ -577,7 +575,7 @@ static int eth_setup(char *str) new->init = str; list_add_tail(&new->list, ð_cmd_line); - return(1); + return 1; } __setup("eth", eth_setup); @@ -790,13 +788,6 @@ void dev_ip_addr(void *d, unsigned char *bin_buf) memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address)); } -void set_ether_mac(void *d, unsigned char *addr) -{ - struct net_device *dev = d; - - memcpy(dev->dev_addr, addr, ETH_ALEN); -} - struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra) { if((skb != NULL) && (skb_tailroom(skb) < extra)){ diff --git a/arch/um/drivers/null.c b/arch/um/drivers/null.c index 14cc5f78398..3683ed44315 100644 --- a/arch/um/drivers/null.c +++ b/arch/um/drivers/null.c @@ -10,7 +10,7 @@ static int null_chan; -static void *null_init(char *str, int device, struct chan_opts *opts) +static void *null_init(char *str, int device, const struct chan_opts *opts) { return(&null_chan); } @@ -31,7 +31,7 @@ static void null_free(void *data) { } -struct chan_ops null_ops = { +const struct chan_ops null_ops = { .type = "null", .init = null_init, .open = null_open, diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c index 466ff2c2f91..6e1ef855828 100644 --- a/arch/um/drivers/pcap_kern.c +++ b/arch/um/drivers/pcap_kern.c @@ -46,7 +46,7 @@ static int pcap_write(int fd, struct sk_buff **skb, struct uml_net_private *lp) return(-EPERM); } -static struct net_kern_info pcap_kern_info = { +static const struct net_kern_info pcap_kern_info = { .init = pcap_init, .protocol = eth_protocol, .read = pcap_read, @@ -76,7 +76,7 @@ int pcap_setup(char *str, char **mac_out, void *data) if(host_if != NULL) init->host_if = host_if; - for(i = 0; i < sizeof(options)/sizeof(options[0]); i++){ + for(i = 0; i < ARRAY_SIZE(options); i++){ if(options[i] == NULL) continue; if(!strcmp(options[i], "promisc")) diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c index edfcb29273e..2ef641ded96 100644 --- a/arch/um/drivers/pcap_user.c +++ b/arch/um/drivers/pcap_user.c @@ -120,7 +120,7 @@ int pcap_user_read(int fd, void *buffer, int len, struct pcap_data *pri) return(hdata.len); } -struct net_user_info pcap_user_info = { +const struct net_user_info pcap_user_info = { .init = pcap_user_init, .open = pcap_open, .close = NULL, diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index c43e8bb3250..f2e8fc42ecc 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -27,7 +27,7 @@ struct port_chan { char dev[sizeof("32768\0")]; }; -static void *port_init(char *str, int device, struct chan_opts *opts) +static void *port_init(char *str, int device, const struct chan_opts *opts) { struct port_chan *data; void *kern_data; @@ -100,7 +100,7 @@ static void port_close(int fd, void *d) os_close_file(fd); } -struct chan_ops port_ops = { +const struct chan_ops port_ops = { .type = "port", .init = port_init, .open = port_open, diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c index 1c555c38de4..abec620e838 100644 --- a/arch/um/drivers/pty.c +++ b/arch/um/drivers/pty.c @@ -22,7 +22,7 @@ struct pty_chan { char dev_name[sizeof("/dev/pts/0123456\0")]; }; -static void *pty_chan_init(char *str, int device, struct chan_opts *opts) +static void *pty_chan_init(char *str, int device, const struct chan_opts *opts) { struct pty_chan *data; @@ -118,7 +118,7 @@ static int pty_open(int input, int output, int primary, void *d, return(fd); } -struct chan_ops pty_ops = { +const struct chan_ops pty_ops = { .type = "pty", .init = pty_chan_init, .open = pty_open, @@ -131,7 +131,7 @@ struct chan_ops pty_ops = { .winch = 0, }; -struct chan_ops pts_ops = { +const struct chan_ops pts_ops = { .type = "pts", .init = pty_chan_init, .open = pts_open, diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index ba471f5864a..ae9909415b9 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -68,7 +68,7 @@ static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size, return ret; } -static struct file_operations rng_chrdev_ops = { +static const struct file_operations rng_chrdev_ops = { .owner = THIS_MODULE, .open = rng_dev_open, .read = rng_dev_read, diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h index bb0dab41c2e..c64f8c61d27 100644 --- a/arch/um/drivers/slip.h +++ b/arch/um/drivers/slip.h @@ -12,7 +12,7 @@ struct slip_data { struct slip_proto slip; }; -extern struct net_user_info slip_user_info; +extern const struct net_user_info slip_user_info; extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri); extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri); diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c index 163ee0d5f75..ccea2d7885e 100644 --- a/arch/um/drivers/slip_kern.c +++ b/arch/um/drivers/slip_kern.c @@ -61,7 +61,7 @@ static int slip_write(int fd, struct sk_buff **skb, (struct slip_data *) &lp->user)); } -struct net_kern_info slip_kern_info = { +const struct net_kern_info slip_kern_info = { .init = slip_init, .protocol = slip_protocol, .read = slip_read, diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 89fbec185cc..8460285c69a 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -241,7 +241,7 @@ static void slip_del_addr(unsigned char *addr, unsigned char *netmask, close_addr(addr, netmask, pri->name); } -struct net_user_info slip_user_info = { +const struct net_user_info slip_user_info = { .init = slip_user_init, .open = slip_open, .close = slip_close, diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h index 6cf88ab580c..89ccf83b757 100644 --- a/arch/um/drivers/slirp.h +++ b/arch/um/drivers/slirp.h @@ -24,7 +24,7 @@ struct slirp_data { struct slip_proto slip; }; -extern struct net_user_info slirp_user_info; +extern const struct net_user_info slirp_user_info; extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri); extern int slirp_user_write(int fd, void *buf, int len, diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c index 95e50c943e1..ae322e1c8a8 100644 --- a/arch/um/drivers/slirp_kern.c +++ b/arch/um/drivers/slirp_kern.c @@ -64,7 +64,7 @@ static int slirp_write(int fd, struct sk_buff **skb, (struct slirp_data *) &lp->user)); } -struct net_kern_info slirp_kern_info = { +const struct net_kern_info slirp_kern_info = { .init = slirp_init, .protocol = slirp_protocol, .read = slirp_read, diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 33c5f6e625e..ce5e85d1de3 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -126,7 +126,7 @@ static int slirp_set_mtu(int mtu, void *data) return(mtu); } -struct net_user_info slirp_user_info = { +const struct net_user_info slirp_user_info = { .init = slirp_user_init, .open = slirp_open, .close = slirp_close, diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index 6dafd6fbfda..6f13e7c71a8 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -23,7 +23,7 @@ #include "irq_user.h" #include "mconsole_kern.h" -static int ssl_version = 1; +static const int ssl_version = 1; /* Referenced only by tty_driver below - presumably it's locked correctly * by the tty driver. @@ -123,7 +123,7 @@ void ssl_hangup(struct tty_struct *tty) } #endif -static struct tty_operations ssl_ops = { +static const struct tty_operations ssl_ops = { .open = ssl_open, .close = line_close, .write = line_write, diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 856f568c268..5e44adb0705 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -110,7 +110,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) static int con_init_done = 0; -static struct tty_operations console_ops = { +static const struct tty_operations console_ops = { .open = con_open, .close = line_close, .write = line_write, diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c index 9f70edf5d8e..11de3ac1eb5 100644 --- a/arch/um/drivers/tty.c +++ b/arch/um/drivers/tty.c @@ -18,7 +18,7 @@ struct tty_chan { struct termios tt; }; -static void *tty_chan_init(char *str, int device, struct chan_opts *opts) +static void *tty_chan_init(char *str, int device, const struct chan_opts *opts) { struct tty_chan *data; @@ -62,7 +62,7 @@ static int tty_open(int input, int output, int primary, void *d, return fd; } -struct chan_ops tty_ops = { +const struct chan_ops tty_ops = { .type = "tty", .init = tty_chan_init, .open = tty_open, diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index aaa63666104..386f8b95298 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -31,7 +31,7 @@ struct xterm_chan { }; /* Not static because it's called directly by the tt mode gdb code */ -void *xterm_init(char *str, int device, struct chan_opts *opts) +void *xterm_init(char *str, int device, const struct chan_opts *opts) { struct xterm_chan *data; @@ -194,7 +194,7 @@ static void xterm_free(void *d) free(d); } -struct chan_ops xterm_ops = { +const struct chan_ops xterm_ops = { .type = "xterm", .init = xterm_init, .open = xterm_open, diff --git a/arch/um/include/chan_kern.h b/arch/um/include/chan_kern.h index 1bb5e9d9427..572d286ed2c 100644 --- a/arch/um/include/chan_kern.h +++ b/arch/um/include/chan_kern.h @@ -23,21 +23,21 @@ struct chan { unsigned int opened:1; unsigned int enabled:1; int fd; - struct chan_ops *ops; + const struct chan_ops *ops; void *data; }; extern void chan_interrupt(struct list_head *chans, struct work_struct *task, struct tty_struct *tty, int irq); extern int parse_chan_pair(char *str, struct line *line, int device, - struct chan_opts *opts); + const struct chan_opts *opts); extern int open_chan(struct list_head *chans); extern int write_chan(struct list_head *chans, const char *buf, int len, int write_irq); extern int console_write_chan(struct list_head *chans, const char *buf, int len); extern int console_open_chan(struct line *line, struct console *co, - struct chan_opts *opts); + const struct chan_opts *opts); extern void deactivate_chan(struct list_head *chans, int irq); extern void reactivate_chan(struct list_head *chans, int irq); extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty); diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h index 659bb3cac32..a795547a1db 100644 --- a/arch/um/include/chan_user.h +++ b/arch/um/include/chan_user.h @@ -20,7 +20,7 @@ enum chan_init_pri { INIT_STATIC, INIT_ALL, INIT_ONE }; struct chan_ops { char *type; - void *(*init)(char *, int, struct chan_opts *); + void *(*init)(char *, int, const struct chan_opts *); int (*open)(int, int, int, void *, char **); void (*close)(int, void *); int (*read)(int, char *, void *); @@ -31,8 +31,8 @@ struct chan_ops { int winch; }; -extern struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops, tty_ops, - xterm_ops; +extern const struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops, + tty_ops, xterm_ops; extern void generic_close(int fd, void *unused); extern int generic_read(int fd, char *c_out, void *unused); diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h index b98bdd8e052..59cfa9e0cad 100644 --- a/arch/um/include/kern_util.h +++ b/arch/um/include/kern_util.h @@ -21,13 +21,12 @@ struct kern_handlers { kern_hndl timer_handler; }; -extern struct kern_handlers handlinfo_kern; +extern const struct kern_handlers handlinfo_kern; extern int ncpus; extern char *linux_prog; extern char *gdb_init; extern int kmalloc_ok; -extern int timer_irq_inited; extern int jail; extern int nsyscalls; diff --git a/arch/um/include/line.h b/arch/um/include/line.h index 27bf2f6fbc0..642c9a0320f 100644 --- a/arch/um/include/line.h +++ b/arch/um/include/line.h @@ -52,7 +52,7 @@ struct line { int sigio; struct work_struct task; - struct line_driver *driver; + const struct line_driver *driver; int have_irq; }; @@ -99,7 +99,7 @@ extern void lines_init(struct line *lines, int nlines, struct chan_opts *opts); extern void close_lines(struct line *lines, int nlines); extern int line_config(struct line *lines, unsigned int sizeof_lines, - char *str, struct chan_opts *opts); + char *str, const struct chan_opts *opts); extern int line_id(char **str, int *start_out, int *end_out); extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n); extern int line_get_config(char *dev, struct line *lines, diff --git a/arch/um/include/longjmp.h b/arch/um/include/longjmp.h index 1b5c0131a12..e93c6d3e893 100644 --- a/arch/um/include/longjmp.h +++ b/arch/um/include/longjmp.h @@ -1,9 +1,12 @@ #ifndef __UML_LONGJMP_H #define __UML_LONGJMP_H -#include <setjmp.h> +#include "sysdep/archsetjmp.h" #include "os.h" +extern int setjmp(jmp_buf); +extern void longjmp(jmp_buf, int); + #define UML_LONGJMP(buf, val) do { \ longjmp(*buf, val); \ } while(0) diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h index f7de6df60dd..769fba43ee0 100644 --- a/arch/um/include/net_kern.h +++ b/arch/um/include/net_kern.h @@ -54,8 +54,8 @@ struct transport { struct list_head list; char *name; int (*setup)(char *, char **, void *); - struct net_user_info *user; - struct net_kern_info *kern; + const struct net_user_info *user; + const struct net_kern_info *kern; int private_size; int setup_size; }; diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 800c403920b..47ef7cb49a8 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -26,7 +26,6 @@ struct net_user_info { extern void ether_user_init(void *data, void *dev); extern void dev_ip_addr(void *d, unsigned char *bin_buf); -extern void set_ether_mac(void *d, unsigned char *addr); extern void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, void *), void *arg); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 5316e8a4a4f..120ca21a513 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -14,6 +14,7 @@ #include "skas/mm_id.h" #include "irq_user.h" #include "sysdep/tls.h" +#include "sysdep/archsetjmp.h" #define OS_TYPE_FILE 1 #define OS_TYPE_DIR 2 @@ -198,7 +199,9 @@ extern long os_ptrace_ldt(long pid, long addr, long data); extern int os_getpid(void); extern int os_getpgrp(void); +#ifdef UML_CONFIG_MODE_TT extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)); +#endif extern void init_new_thread_signals(void); extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr); @@ -216,7 +219,6 @@ extern void os_flush_stdout(void); */ extern void forward_ipi(int fd, int pid); extern void kill_child_dead(int pid); -extern void stop(void); extern int wait_for_stop(int pid, int sig, int cont_type, void *relay); extern int protect_memory(unsigned long addr, unsigned long len, int r, int w, int x, int must_succeed); @@ -276,9 +278,11 @@ extern int setjmp_wrapper(void (*proc)(void *, void *), ...); extern void switch_timers(int to_real); extern void idle_sleep(int secs); +extern int set_interval(int is_virtual); +#ifdef CONFIG_MODE_TT extern void enable_timer(void); +#endif extern void disable_timer(void); -extern void user_time_init(void); extern void uml_idle_timer(void); extern unsigned long long os_nsecs(void); @@ -305,12 +309,9 @@ extern int copy_context_skas0(unsigned long stack, int pid); extern void userspace(union uml_pt_regs *regs); extern void map_stub_pages(int fd, unsigned long code, unsigned long data, unsigned long stack); -extern void new_thread(void *stack, void **switch_buf_ptr, - void **fork_buf_ptr, void (*handler)(int)); -extern void thread_wait(void *sw, void *fb); -extern void switch_threads(void *me, void *next); -extern int start_idle_thread(void *stack, void *switch_buf_ptr, - void **fork_buf_ptr); +extern void new_thread(void *stack, jmp_buf *buf, void (*handler)(void)); +extern void switch_threads(jmp_buf *me, jmp_buf *you); +extern int start_idle_thread(void *stack, jmp_buf *switch_buf); extern void initial_thread_cb_skas(void (*proc)(void *), void *arg); extern void halt_skas(void); @@ -329,6 +330,7 @@ extern void os_set_ioignore(void); extern void init_irq_signals(int on_sigstack); /* sigio.c */ +extern int add_sigio_fd(int fd); extern int ignore_sigio_fd(int fd); extern void maybe_sigio_broken(int fd, int read); diff --git a/arch/um/include/registers.h b/arch/um/include/registers.h index 83b688ca198..f845b3629a6 100644 --- a/arch/um/include/registers.h +++ b/arch/um/include/registers.h @@ -7,6 +7,7 @@ #define __REGISTERS_H #include "sysdep/ptrace.h" +#include "sysdep/archsetjmp.h" extern void init_thread_registers(union uml_pt_regs *to); extern int save_fp_registers(int pid, unsigned long *fp_regs); @@ -15,6 +16,6 @@ extern void save_registers(int pid, union uml_pt_regs *regs); extern void restore_registers(int pid, union uml_pt_regs *regs); extern void init_registers(int pid); extern void get_safe_registers(unsigned long * regs, unsigned long * fp_regs); -extern void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer); +extern unsigned long get_thread_reg(int reg, jmp_buf *buf); #endif diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h index 853b26f148c..e88926b1607 100644 --- a/arch/um/include/skas/skas.h +++ b/arch/um/include/skas/skas.h @@ -14,8 +14,7 @@ extern int proc_mm, ptrace_faultinfo, ptrace_ldt; extern int skas_needs_stub; extern int user_thread(unsigned long stack, int flags); -extern void new_thread_proc(void *stack, void (*handler)(int sig)); -extern void new_thread_handler(int sig); +extern void new_thread_handler(void); extern void handle_syscall(union uml_pt_regs *regs); extern int new_mm(unsigned long stack); extern void get_skas_faultinfo(int pid, struct faultinfo * fi); diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/include/sysdep-i386/archsetjmp.h new file mode 100644 index 00000000000..11bafab669e --- /dev/null +++ b/arch/um/include/sysdep-i386/archsetjmp.h @@ -0,0 +1,22 @@ +/* + * arch/i386/include/klibc/archsetjmp.h + */ + +#ifndef _KLIBC_ARCHSETJMP_H +#define _KLIBC_ARCHSETJMP_H + +struct __jmp_buf { + unsigned int __ebx; + unsigned int __esp; + unsigned int __ebp; + unsigned int __esi; + unsigned int __edi; + unsigned int __eip; +}; + +typedef struct __jmp_buf jmp_buf[1]; + +#define JB_IP __eip +#define JB_SP __esp + +#endif /* _SETJMP_H */ diff --git a/arch/um/include/sysdep-i386/signal.h b/arch/um/include/sysdep-i386/signal.h deleted file mode 100644 index 07518b16213..00000000000 --- a/arch/um/include/sysdep-i386/signal.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2004 PathScale, Inc - * Licensed under the GPL - */ - -#ifndef __I386_SIGNAL_H_ -#define __I386_SIGNAL_H_ - -#include <signal.h> - -#define ARCH_SIGHDLR_PARAM int sig - -#define ARCH_GET_SIGCONTEXT(sc, sig) \ - do sc = (struct sigcontext *) (&sig + 1); while(0) - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/include/sysdep-x86_64/archsetjmp.h new file mode 100644 index 00000000000..9a5e1a6ec80 --- /dev/null +++ b/arch/um/include/sysdep-x86_64/archsetjmp.h @@ -0,0 +1,24 @@ +/* + * arch/x86_64/include/klibc/archsetjmp.h + */ + +#ifndef _KLIBC_ARCHSETJMP_H +#define _KLIBC_ARCHSETJMP_H + +struct __jmp_buf { + unsigned long __rbx; + unsigned long __rsp; + unsigned long __rbp; + unsigned long __r12; + unsigned long __r13; + unsigned long __r14; + unsigned long __r15; + unsigned long __rip; +}; + +typedef struct __jmp_buf jmp_buf[1]; + +#define JB_IP __rip +#define JB_SP __rsp + +#endif /* _SETJMP_H */ diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index 8d353f0feec..617bb9efc93 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -50,6 +50,21 @@ #define HOST_FS 25 #define HOST_GS 26 +/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these + * are already defined for kernel code, but not for userspace code. + */ +#ifndef FS_BASE +/* These aren't defined in ptrace.h, but exist in struct user_regs_struct, + * which is what x86_64 ptrace actually uses. + */ +#define FS_BASE (HOST_FS_BASE * sizeof(long)) +#define GS_BASE (HOST_GS_BASE * sizeof(long)) +#define DS (HOST_DS * sizeof(long)) +#define ES (HOST_ES * sizeof(long)) +#define FS (HOST_FS * sizeof(long)) +#define GS (HOST_GS * sizeof(long)) +#endif + #define REGS_FS_BASE(r) ((r)[HOST_FS_BASE]) #define REGS_GS_BASE(r) ((r)[HOST_GS_BASE]) #define REGS_DS(r) ((r)[HOST_DS]) @@ -89,9 +104,12 @@ union uml_pt_regs { #endif #ifdef UML_CONFIG_MODE_SKAS struct skas_regs { - /* XXX */ - unsigned long regs[27]; - unsigned long fp[65]; + /* x86_64 ptrace uses sizeof(user_regs_struct) as its register + * file size, while i386 uses FRAME_SIZE. Therefore, we need + * to use UM_FRAME_SIZE here instead of HOST_FRAME_SIZE. + */ + unsigned long regs[UM_FRAME_SIZE]; + unsigned long fp[HOST_FP_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; @@ -120,11 +138,16 @@ extern int mode_tt; #define UPT_R14(r) __CHOOSE_MODE(SC_R14(UPT_SC(r)), REGS_R14((r)->skas.regs)) #define UPT_R15(r) __CHOOSE_MODE(SC_R15(UPT_SC(r)), REGS_R15((r)->skas.regs)) #define UPT_CS(r) __CHOOSE_MODE(SC_CS(UPT_SC(r)), REGS_CS((r)->skas.regs)) +#define UPT_FS_BASE(r) \ + __CHOOSE_MODE(SC_FS_BASE(UPT_SC(r)), REGS_FS_BASE((r)->skas.regs)) #define UPT_FS(r) __CHOOSE_MODE(SC_FS(UPT_SC(r)), REGS_FS((r)->skas.regs)) +#define UPT_GS_BASE(r) \ + __CHOOSE_MODE(SC_GS_BASE(UPT_SC(r)), REGS_GS_BASE((r)->skas.regs)) #define UPT_GS(r) __CHOOSE_MODE(SC_GS(UPT_SC(r)), REGS_GS((r)->skas.regs)) #define UPT_DS(r) __CHOOSE_MODE(SC_DS(UPT_SC(r)), REGS_DS((r)->skas.regs)) #define UPT_ES(r) __CHOOSE_MODE(SC_ES(UPT_SC(r)), REGS_ES((r)->skas.regs)) #define UPT_CS(r) __CHOOSE_MODE(SC_CS(UPT_SC(r)), REGS_CS((r)->skas.regs)) +#define UPT_SS(r) __CHOOSE_MODE(SC_SS(UPT_SC(r)), REGS_SS((r)->skas.regs)) #define UPT_ORIG_RAX(r) \ __CHOOSE_MODE((r)->tt.orig_rax, REGS_ORIG_RAX((r)->skas.regs)) @@ -183,6 +206,13 @@ struct syscall_args { case RBP: val = UPT_RBP(regs); break; \ case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \ case CS: val = UPT_CS(regs); break; \ + case SS: val = UPT_SS(regs); break; \ + case FS_BASE: val = UPT_FS_BASE(regs); break; \ + case GS_BASE: val = UPT_GS_BASE(regs); break; \ + case DS: val = UPT_DS(regs); break; \ + case ES: val = UPT_ES(regs); break; \ + case FS : val = UPT_FS (regs); break; \ + case GS: val = UPT_GS(regs); break; \ case EFLAGS: val = UPT_EFLAGS(regs); break; \ default : \ panic("Bad register in UPT_REG : %d\n", reg); \ @@ -214,6 +244,13 @@ struct syscall_args { case RBP: UPT_RBP(regs) = __upt_val; break; \ case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \ case CS: UPT_CS(regs) = __upt_val; break; \ + case SS: UPT_SS(regs) = __upt_val; break; \ + case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break; \ + case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break; \ + case DS: UPT_DS(regs) = __upt_val; break; \ + case ES: UPT_ES(regs) = __upt_val; break; \ + case FS: UPT_FS(regs) = __upt_val; break; \ + case GS: UPT_GS(regs) = __upt_val; break; \ case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \ default : \ panic("Bad register in UPT_SET : %d\n", reg); \ diff --git a/arch/um/include/sysdep-x86_64/sc.h b/arch/um/include/sysdep-x86_64/sc.h index a160d9fcc59..8aee45b0743 100644 --- a/arch/um/include/sysdep-x86_64/sc.h +++ b/arch/um/include/sysdep-x86_64/sc.h @@ -35,11 +35,11 @@ #define SC_GS(sc) SC_OFFSET(sc, SC_GS) #define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS) #define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK) +#define SC_SS(sc) SC_OFFSET(sc, SC_SS) #if 0 #define SC_ORIG_RAX(sc) SC_OFFSET(sc, SC_ORIG_RAX) #define SC_DS(sc) SC_OFFSET(sc, SC_DS) #define SC_ES(sc) SC_OFFSET(sc, SC_ES) -#define SC_SS(sc) SC_OFFSET(sc, SC_SS) #endif #endif diff --git a/arch/um/include/sysdep-x86_64/signal.h b/arch/um/include/sysdep-x86_64/signal.h deleted file mode 100644 index 6142897af3d..00000000000 --- a/arch/um/include/sysdep-x86_64/signal.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2004 PathScale, Inc - * Licensed under the GPL - */ - -#ifndef __X86_64_SIGNAL_H_ -#define __X86_64_SIGNAL_H_ - -#define ARCH_SIGHDLR_PARAM int sig - -#define ARCH_GET_SIGCONTEXT(sc, sig_addr) \ - do { \ - struct ucontext *__uc; \ - asm("movq %%rdx, %0" : "=r" (__uc)); \ - sc = (struct sigcontext *) &__uc->uc_mcontext; \ - } while(0) - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index a2d93065b2d..6fa63a2a89e 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \ - physmem.o process_kern.o ptrace.o reboot.o resource.o sigio.o \ + physmem.o process.o ptrace.o reboot.o resource.o sigio.o \ signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \ um_arch.o umid.o diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c index fc38a6d5906..0561c43b468 100644 --- a/arch/um/kernel/exec.c +++ b/arch/um/kernel/exec.c @@ -41,9 +41,11 @@ static long execve1(char *file, char __user * __user *argv, long error; #ifdef CONFIG_TTY_LOG - task_lock(current); + mutex_lock(&tty_mutex); + task_lock(current); /* FIXME: is this needed ? */ log_exec(argv, current->signal->tty); task_unlock(current); + mutex_unlock(&tty_mutex); #endif error = do_execve(file, argv, env, ¤t->thread.regs); if (error == 0){ diff --git a/arch/um/kernel/gmon_syms.c b/arch/um/kernel/gmon_syms.c index 2c86e7fdb01..13aa115cd1b 100644 --- a/arch/um/kernel/gmon_syms.c +++ b/arch/um/kernel/gmon_syms.c @@ -5,7 +5,7 @@ #include "linux/module.h" -extern void __bb_init_func(void *); +extern void __bb_init_func(void *) __attribute__((weak)); EXPORT_SYMBOL(__bb_init_func); /* This is defined (and referred to in profiling stub code) only by some GCC @@ -21,14 +21,3 @@ EXPORT_SYMBOL(__gcov_init); extern void __gcov_merge_add(void *) __attribute__((weak)); EXPORT_SYMBOL(__gcov_merge_add); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 589c69a7504..ce7f233fc49 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -142,19 +142,6 @@ int activate_fd(int irq, int fd, int type, void *dev_id) .events = events, .current_events = 0 } ); - /* Critical section - locked by a spinlock because this stuff can - * be changed from interrupt handlers. The stuff above is done - * outside the lock because it allocates memory. - */ - - /* Actually, it only looks like it can be called from interrupt - * context. The culprit is reactivate_fd, which calls - * maybe_sigio_broken, which calls write_sigio_workaround, - * which calls activate_fd. However, write_sigio_workaround should - * only be called once, at boot time. That would make it clear that - * this is called only from process context, and can be locked with - * a semaphore. - */ spin_lock_irqsave(&irq_lock, flags); for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) { if ((irq_fd->fd == fd) && (irq_fd->type == type)) { @@ -165,7 +152,6 @@ int activate_fd(int irq, int fd, int type, void *dev_id) } } - /*-------------*/ if (type == IRQ_WRITE) fd = -1; @@ -198,7 +184,6 @@ int activate_fd(int irq, int fd, int type, void *dev_id) spin_lock_irqsave(&irq_lock, flags); } - /*-------------*/ *last_irq_ptr = new_fd; last_irq_ptr = &new_fd->next; @@ -210,14 +195,14 @@ int activate_fd(int irq, int fd, int type, void *dev_id) */ maybe_sigio_broken(fd, (type == IRQ_READ)); - return(0); + return 0; out_unlock: spin_unlock_irqrestore(&irq_lock, flags); out_kfree: kfree(new_fd); out: - return(err); + return err; } static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) @@ -302,10 +287,7 @@ void reactivate_fd(int fd, int irqnum) os_set_pollfd(i, irq->fd); spin_unlock_irqrestore(&irq_lock, flags); - /* This calls activate_fd, so it has to be outside the critical - * section. - */ - maybe_sigio_broken(fd, (irq->type == IRQ_READ)); + add_sigio_fd(fd); } void deactivate_fd(int fd, int irqnum) @@ -316,11 +298,15 @@ void deactivate_fd(int fd, int irqnum) spin_lock_irqsave(&irq_lock, flags); irq = find_irq_by_fd(fd, irqnum, &i); - if (irq == NULL) - goto out; + if(irq == NULL){ + spin_unlock_irqrestore(&irq_lock, flags); + return; + } + os_set_pollfd(i, -1); - out: spin_unlock_irqrestore(&irq_lock, flags); + + ignore_sigio_fd(fd); } int deactivate_all_fds(void) diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index c97045d6d89..f030e44262b 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -21,7 +21,6 @@ #include "mem_user.h" #include "os.h" -EXPORT_SYMBOL(stop); EXPORT_SYMBOL(uml_physmem); EXPORT_SYMBOL(set_signals); EXPORT_SYMBOL(get_signals); @@ -41,12 +40,14 @@ EXPORT_SYMBOL(handle_page_fault); EXPORT_SYMBOL(find_iomem); #ifdef CONFIG_MODE_TT +EXPORT_SYMBOL(stop); EXPORT_SYMBOL(strncpy_from_user_tt); EXPORT_SYMBOL(copy_from_user_tt); EXPORT_SYMBOL(copy_to_user_tt); #endif #ifdef CONFIG_MODE_SKAS +EXPORT_SYMBOL(strnlen_user_skas); EXPORT_SYMBOL(strncpy_from_user_skas); EXPORT_SYMBOL(copy_to_user_skas); EXPORT_SYMBOL(copy_from_user_skas); diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 61280167c56..c95855ba6ab 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -79,8 +79,10 @@ void mem_init(void) /* this will put all low memory onto the freelists */ totalram_pages = free_all_bootmem(); +#ifdef CONFIG_HIGHMEM totalhigh_pages = highmem >> PAGE_SHIFT; totalram_pages += totalhigh_pages; +#endif num_physpages = totalram_pages; max_pfn = totalram_pages; printk(KERN_INFO "Memory: %luk available\n", @@ -221,10 +223,14 @@ void paging_init(void) empty_zero_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE); empty_bad_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE); - for(i=0;i<sizeof(zones_size)/sizeof(zones_size[0]);i++) + for(i = 0; i < ARRAY_SIZE(zones_size); i++) zones_size[i] = 0; - zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); + + zones_size[ZONE_NORMAL] = (end_iomem >> PAGE_SHIFT) - + (uml_physmem >> PAGE_SHIFT); +#ifdef CONFIG_HIGHMEM zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT; +#endif free_area_init(zones_size); /* diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process.c index f6a5a502120..fe6c64abda5 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process.c @@ -1,10 +1,9 @@ -/* +/* * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) * Copyright 2003 PathScale, Inc. * Licensed under the GPL */ -#include "linux/config.h" #include "linux/kernel.h" #include "linux/sched.h" #include "linux/interrupt.h" @@ -23,6 +22,7 @@ #include "linux/proc_fs.h" #include "linux/ptrace.h" #include "linux/random.h" +#include "linux/personality.h" #include "asm/unistd.h" #include "asm/mman.h" #include "asm/segment.h" @@ -112,11 +112,11 @@ void set_current(void *t) void *_switch_to(void *prev, void *next, void *last) { - struct task_struct *from = prev; - struct task_struct *to= next; + struct task_struct *from = prev; + struct task_struct *to= next; - to->thread.prev_sched = from; - set_current(to); + to->thread.prev_sched = from; + set_current(to); do { current->thread.saved_task = NULL ; @@ -127,7 +127,7 @@ void *_switch_to(void *prev, void *next, void *last) prev= current; } while(current->thread.saved_task); - return(current->thread.prev_sched); + return(current->thread.prev_sched); } @@ -141,19 +141,19 @@ void release_thread(struct task_struct *task) { CHOOSE_MODE(release_thread_tt(task), release_thread_skas(task)); } - + void exit_thread(void) { unprotect_stack((unsigned long) current_thread); } - + void *get_current(void) { return(current); } int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, - unsigned long stack_top, struct task_struct * p, + unsigned long stack_top, struct task_struct * p, struct pt_regs *regs) { int ret; @@ -182,11 +182,11 @@ void initial_thread_cb(void (*proc)(void *), void *arg) int save_kmalloc_ok = kmalloc_ok; kmalloc_ok = 0; - CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc, + CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc, arg); kmalloc_ok = save_kmalloc_ok; } - + unsigned long stack_sp(unsigned long page) { return(page + PAGE_SIZE - sizeof(void *)); @@ -210,7 +210,7 @@ void default_idle(void) */ if(need_resched()) schedule(); - + idle_sleep(10); } } @@ -225,7 +225,7 @@ int page_size(void) return(PAGE_SIZE); } -void *um_virt_to_phys(struct task_struct *task, unsigned long addr, +void *um_virt_to_phys(struct task_struct *task, unsigned long addr, pte_t *pte_out) { pgd_t *pgd; @@ -234,7 +234,7 @@ void *um_virt_to_phys(struct task_struct *task, unsigned long addr, pte_t *pte; pte_t ptent; - if(task->mm == NULL) + if(task->mm == NULL) return(ERR_PTR(-EINVAL)); pgd = pgd_offset(task->mm, addr); if(!pgd_present(*pgd)) @@ -245,7 +245,7 @@ void *um_virt_to_phys(struct task_struct *task, unsigned long addr, return(ERR_PTR(-EINVAL)); pmd = pmd_offset(pud, addr); - if(!pmd_present(*pmd)) + if(!pmd_present(*pmd)) return(ERR_PTR(-EINVAL)); pte = pte_offset_kernel(pmd, addr); @@ -270,7 +270,7 @@ char *current_cmd(void) void force_sigbus(void) { - printk(KERN_ERR "Killing pid %d because of a lack of memory\n", + printk(KERN_ERR "Killing pid %d because of a lack of memory\n", current->pid); lock_kernel(); sigaddset(¤t->pending.signal, SIGBUS); @@ -476,7 +476,7 @@ int singlestepping(void * t) #ifndef arch_align_stack unsigned long arch_align_stack(unsigned long sp) { - if (randomize_va_space) + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) sp -= get_random_int() % 8192; return sp & ~0xf; } diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c index 3ef73bf2e78..f602623644a 100644 --- a/arch/um/kernel/reboot.c +++ b/arch/um/kernel/reboot.c @@ -22,7 +22,7 @@ static void kill_idlers(int me) struct task_struct *p; int i; - for(i = 0; i < sizeof(idle_threads)/sizeof(idle_threads[0]); i++){ + for(i = 0; i < ARRAY_SIZE(idle_threads); i++){ p = idle_threads[i]; if((p != NULL) && (p->thread.mode.tt.extern_pid != me)) os_kill_process(p->thread.mode.tt.extern_pid, 0); @@ -62,14 +62,3 @@ void machine_halt(void) { machine_power_off(); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile index ea3a8e409a6..3e3fa7e7e3c 100644 --- a/arch/um/kernel/skas/Makefile +++ b/arch/um/kernel/skas/Makefile @@ -3,8 +3,7 @@ # Licensed under the GPL # -obj-y := clone.o exec_kern.o mem.o mmu.o process_kern.o \ - syscall.o tlb.o uaccess.o +obj-y := clone.o exec.o mem.o mmu.o process.o syscall.o tlb.o uaccess.o # clone.o is in the stub, so it can't be built with profiling # GCC hardened also auto-enables -fpic, but we need %ebx so it can't work -> diff --git a/arch/um/kernel/skas/exec.c b/arch/um/kernel/skas/exec.c new file mode 100644 index 00000000000..54b79595137 --- /dev/null +++ b/arch/um/kernel/skas/exec.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/kernel.h" +#include "asm/current.h" +#include "asm/page.h" +#include "asm/signal.h" +#include "asm/ptrace.h" +#include "asm/uaccess.h" +#include "asm/mmu_context.h" +#include "tlb.h" +#include "skas.h" +#include "um_mmu.h" +#include "os.h" + +void flush_thread_skas(void) +{ + force_flush_all(); + switch_mm_skas(¤t->mm->context.skas.id); +} + +void start_thread_skas(struct pt_regs *regs, unsigned long eip, + unsigned long esp) +{ + set_fs(USER_DS); + PT_REGS_IP(regs) = eip; + PT_REGS_SP(regs) = esp; +} diff --git a/arch/um/kernel/skas/exec_kern.c b/arch/um/kernel/skas/exec_kern.c deleted file mode 100644 index 77ed7bbab21..00000000000 --- a/arch/um/kernel/skas/exec_kern.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include "linux/kernel.h" -#include "asm/current.h" -#include "asm/page.h" -#include "asm/signal.h" -#include "asm/ptrace.h" -#include "asm/uaccess.h" -#include "asm/mmu_context.h" -#include "tlb.h" -#include "skas.h" -#include "um_mmu.h" -#include "os.h" - -void flush_thread_skas(void) -{ - force_flush_all(); - switch_mm_skas(¤t->mm->context.skas.id); -} - -void start_thread_skas(struct pt_regs *regs, unsigned long eip, - unsigned long esp) -{ - set_fs(USER_DS); - PT_REGS_IP(regs) = eip; - PT_REGS_SP(regs) = esp; -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 624ca238d1f..79c22707a63 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -55,7 +55,7 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, * destroy_context_skas. */ - mm->context.skas.last_page_table = pmd_page_kernel(*pmd); + mm->context.skas.last_page_table = pmd_page_vaddr(*pmd); #ifdef CONFIG_3_LEVEL_PGTABLES mm->context.skas.last_pmd = (unsigned long) __va(pud_val(*pud)); #endif diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c new file mode 100644 index 00000000000..ae4fa71d3b8 --- /dev/null +++ b/arch/um/kernel/skas/process.c @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/sched.h" +#include "linux/slab.h" +#include "linux/ptrace.h" +#include "linux/proc_fs.h" +#include "linux/file.h" +#include "linux/errno.h" +#include "linux/init.h" +#include "asm/uaccess.h" +#include "asm/atomic.h" +#include "kern_util.h" +#include "skas.h" +#include "os.h" +#include "user_util.h" +#include "tlb.h" +#include "kern.h" +#include "mode.h" +#include "registers.h" + +void switch_to_skas(void *prev, void *next) +{ + struct task_struct *from, *to; + + from = prev; + to = next; + + /* XXX need to check runqueues[cpu].idle */ + if(current->pid == 0) + switch_timers(0); + + switch_threads(&from->thread.mode.skas.switch_buf, + &to->thread.mode.skas.switch_buf); + + arch_switch_to_skas(current->thread.prev_sched, current); + + if(current->pid == 0) + switch_timers(1); +} + +extern void schedule_tail(struct task_struct *prev); + +/* This is called magically, by its address being stuffed in a jmp_buf + * and being longjmp-d to. + */ +void new_thread_handler(void) +{ + int (*fn)(void *), n; + void *arg; + + if(current->thread.prev_sched != NULL) + schedule_tail(current->thread.prev_sched); + current->thread.prev_sched = NULL; + + fn = current->thread.request.u.thread.proc; + arg = current->thread.request.u.thread.arg; + + /* The return value is 1 if the kernel thread execs a process, + * 0 if it just exits + */ + n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf); + if(n == 1){ + /* Handle any immediate reschedules or signals */ + interrupt_end(); + userspace(¤t->thread.regs.regs); + } + else do_exit(0); +} + +void release_thread_skas(struct task_struct *task) +{ +} + +/* Called magically, see new_thread_handler above */ +void fork_handler(void) +{ + force_flush_all(); + if(current->thread.prev_sched == NULL) + panic("blech"); + + schedule_tail(current->thread.prev_sched); + + /* XXX: if interrupt_end() calls schedule, this call to + * arch_switch_to_skas isn't needed. We could want to apply this to + * improve performance. -bb */ + arch_switch_to_skas(current->thread.prev_sched, current); + + current->thread.prev_sched = NULL; + +/* Handle any immediate reschedules or signals */ + interrupt_end(); + + userspace(¤t->thread.regs.regs); +} + +int copy_thread_skas(int nr, unsigned long clone_flags, unsigned long sp, + unsigned long stack_top, struct task_struct * p, + struct pt_regs *regs) +{ + void (*handler)(void); + + if(current->thread.forking){ + memcpy(&p->thread.regs.regs.skas, ®s->regs.skas, + sizeof(p->thread.regs.regs.skas)); + REGS_SET_SYSCALL_RETURN(p->thread.regs.regs.skas.regs, 0); + if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp; + + handler = fork_handler; + + arch_copy_thread(¤t->thread.arch, &p->thread.arch); + } + else { + init_thread_registers(&p->thread.regs.regs); + p->thread.request.u.thread = current->thread.request.u.thread; + handler = new_thread_handler; + } + + new_thread(task_stack_page(p), &p->thread.mode.skas.switch_buf, + handler); + return(0); +} + +int new_mm(unsigned long stack) +{ + int fd; + + fd = os_open_file("/proc/mm", of_cloexec(of_write(OPENFLAGS())), 0); + if(fd < 0) + return(fd); + + if(skas_needs_stub) + map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); + + return(fd); +} + +void init_idle_skas(void) +{ + cpu_tasks[current_thread->cpu].pid = os_getpid(); + default_idle(); +} + +extern void start_kernel(void); + +static int start_kernel_proc(void *unused) +{ + int pid; + + block_signals(); + pid = os_getpid(); + + cpu_tasks[0].pid = pid; + cpu_tasks[0].task = current; +#ifdef CONFIG_SMP + cpu_online_map = cpumask_of_cpu(0); +#endif + start_kernel(); + return(0); +} + +extern int userspace_pid[]; + +int start_uml_skas(void) +{ + if(proc_mm) + userspace_pid[0] = start_userspace(0); + + init_new_thread_signals(); + + init_task.thread.request.u.thread.proc = start_kernel_proc; + init_task.thread.request.u.thread.arg = NULL; + return(start_idle_thread(task_stack_page(&init_task), + &init_task.thread.mode.skas.switch_buf)); +} + +int external_pid_skas(struct task_struct *task) +{ +#warning Need to look up userspace_pid by cpu + return(userspace_pid[0]); +} + +int thread_pid_skas(struct task_struct *task) +{ +#warning Need to look up userspace_pid by cpu + return(userspace_pid[0]); +} + +void kill_off_processes_skas(void) +{ + if(proc_mm) +#warning need to loop over userspace_pids in kill_off_processes_skas + os_kill_ptraced_process(userspace_pid[0], 1); + else { + struct task_struct *p; + int pid, me; + + me = os_getpid(); + for_each_process(p){ + if(p->mm == NULL) + continue; + + pid = p->mm->context.skas.id.u.pid; + os_kill_ptraced_process(pid, 1); + } + } +} + +unsigned long current_stub_stack(void) +{ + if(current->mm == NULL) + return(0); + + return(current->mm->context.skas.id.stack); +} diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index 55caeec8b25..0f3d5d084dc 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -1,227 +1,484 @@ /* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Copyright 2003 PathScale, Inc. * Licensed under the GPL */ +#include "linux/config.h" +#include "linux/kernel.h" #include "linux/sched.h" +#include "linux/interrupt.h" +#include "linux/string.h" +#include "linux/mm.h" #include "linux/slab.h" -#include "linux/ptrace.h" -#include "linux/proc_fs.h" -#include "linux/file.h" -#include "linux/errno.h" +#include "linux/utsname.h" +#include "linux/fs.h" +#include "linux/utime.h" +#include "linux/smp_lock.h" +#include "linux/module.h" #include "linux/init.h" +#include "linux/capability.h" +#include "linux/vmalloc.h" +#include "linux/spinlock.h" +#include "linux/proc_fs.h" +#include "linux/ptrace.h" +#include "linux/random.h" +#include "linux/personality.h" +#include "asm/unistd.h" +#include "asm/mman.h" +#include "asm/segment.h" +#include "asm/stat.h" +#include "asm/pgtable.h" +#include "asm/processor.h" +#include "asm/tlbflush.h" #include "asm/uaccess.h" -#include "asm/atomic.h" -#include "kern_util.h" -#include "skas.h" -#include "os.h" +#include "asm/user.h" #include "user_util.h" -#include "tlb.h" +#include "kern_util.h" #include "kern.h" +#include "signal_kern.h" +#include "init.h" +#include "irq_user.h" +#include "mem_user.h" +#include "tlb.h" +#include "frame_kern.h" +#include "sigcontext.h" +#include "os.h" #include "mode.h" -#include "registers.h" +#include "mode_kern.h" +#include "choose-mode.h" + +/* This is a per-cpu array. A processor only modifies its entry and it only + * cares about its entry, so it's OK if another processor is modifying its + * entry. + */ +struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } }; + +int external_pid(void *t) +{ + struct task_struct *task = t ? t : current; + + return(CHOOSE_MODE_PROC(external_pid_tt, external_pid_skas, task)); +} + +int pid_to_processor_id(int pid) +{ + int i; + + for(i = 0; i < ncpus; i++){ + if(cpu_tasks[i].pid == pid) return(i); + } + return(-1); +} + +void free_stack(unsigned long stack, int order) +{ + free_pages(stack, order); +} + +unsigned long alloc_stack(int order, int atomic) +{ + unsigned long page; + gfp_t flags = GFP_KERNEL; + + if (atomic) + flags = GFP_ATOMIC; + page = __get_free_pages(flags, order); + if(page == 0) + return(0); + stack_protections(page); + return(page); +} + +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + int pid; + + current->thread.request.u.thread.proc = fn; + current->thread.request.u.thread.arg = arg; + pid = do_fork(CLONE_VM | CLONE_UNTRACED | flags, 0, + ¤t->thread.regs, 0, NULL, NULL); + if(pid < 0) + panic("do_fork failed in kernel_thread, errno = %d", pid); + return(pid); +} -void switch_to_skas(void *prev, void *next) +void set_current(void *t) { - struct task_struct *from, *to; + struct task_struct *task = t; - from = prev; - to = next; + cpu_tasks[task_thread_info(task)->cpu] = ((struct cpu_task) + { external_pid(task), task }); +} - /* XXX need to check runqueues[cpu].idle */ - if(current->pid == 0) - switch_timers(0); +void *_switch_to(void *prev, void *next, void *last) +{ + struct task_struct *from = prev; + struct task_struct *to= next; - switch_threads(&from->thread.mode.skas.switch_buf, - to->thread.mode.skas.switch_buf); + to->thread.prev_sched = from; + set_current(to); - arch_switch_to_skas(current->thread.prev_sched, current); + do { + current->thread.saved_task = NULL ; + CHOOSE_MODE_PROC(switch_to_tt, switch_to_skas, prev, next); + if(current->thread.saved_task) + show_regs(&(current->thread.regs)); + next= current->thread.saved_task; + prev= current; + } while(current->thread.saved_task); + + return(current->thread.prev_sched); - if(current->pid == 0) - switch_timers(1); } -extern void schedule_tail(struct task_struct *prev); +void interrupt_end(void) +{ + if(need_resched()) schedule(); + if(test_tsk_thread_flag(current, TIF_SIGPENDING)) do_signal(); +} -void new_thread_handler(int sig) +void release_thread(struct task_struct *task) { - int (*fn)(void *), n; - void *arg; + CHOOSE_MODE(release_thread_tt(task), release_thread_skas(task)); +} - fn = current->thread.request.u.thread.proc; - arg = current->thread.request.u.thread.arg; - os_usr1_signal(1); - thread_wait(¤t->thread.mode.skas.switch_buf, - current->thread.mode.skas.fork_buf); +void exit_thread(void) +{ + unprotect_stack((unsigned long) current_thread); +} - if(current->thread.prev_sched != NULL) - schedule_tail(current->thread.prev_sched); - current->thread.prev_sched = NULL; +void *get_current(void) +{ + return(current); +} + +int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, + unsigned long stack_top, struct task_struct * p, + struct pt_regs *regs) +{ + int ret; - /* The return value is 1 if the kernel thread execs a process, - * 0 if it just exits + p->thread = (struct thread_struct) INIT_THREAD; + ret = CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr, + clone_flags, sp, stack_top, p, regs); + + if (ret || !current->thread.forking) + goto out; + + clear_flushed_tls(p); + + /* + * Set a new TLS for the child thread? */ - n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf); - if(n == 1){ - /* Handle any immediate reschedules or signals */ - interrupt_end(); - userspace(¤t->thread.regs.regs); + if (clone_flags & CLONE_SETTLS) + ret = arch_copy_tls(p); + +out: + return ret; +} + +void initial_thread_cb(void (*proc)(void *), void *arg) +{ + int save_kmalloc_ok = kmalloc_ok; + + kmalloc_ok = 0; + CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc, + arg); + kmalloc_ok = save_kmalloc_ok; +} + +unsigned long stack_sp(unsigned long page) +{ + return(page + PAGE_SIZE - sizeof(void *)); +} + +int current_pid(void) +{ + return(current->pid); +} + +void default_idle(void) +{ + CHOOSE_MODE(uml_idle_timer(), (void) 0); + + while(1){ + /* endless idle loop with no priority at all */ + + /* + * although we are an idle CPU, we do not want to + * get into the scheduler unnecessarily. + */ + if(need_resched()) + schedule(); + + idle_sleep(10); } - else do_exit(0); } -void new_thread_proc(void *stack, void (*handler)(int sig)) +void cpu_idle(void) { - init_new_thread_stack(stack, handler); - os_usr1_process(os_getpid()); + CHOOSE_MODE(init_idle_tt(), init_idle_skas()); } -void release_thread_skas(struct task_struct *task) +int page_size(void) { + return(PAGE_SIZE); } -void fork_handler(int sig) +void *um_virt_to_phys(struct task_struct *task, unsigned long addr, + pte_t *pte_out) { - os_usr1_signal(1); - thread_wait(¤t->thread.mode.skas.switch_buf, - current->thread.mode.skas.fork_buf); - - force_flush_all(); - if(current->thread.prev_sched == NULL) - panic("blech"); + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + pte_t ptent; + + if(task->mm == NULL) + return(ERR_PTR(-EINVAL)); + pgd = pgd_offset(task->mm, addr); + if(!pgd_present(*pgd)) + return(ERR_PTR(-EINVAL)); + + pud = pud_offset(pgd, addr); + if(!pud_present(*pud)) + return(ERR_PTR(-EINVAL)); + + pmd = pmd_offset(pud, addr); + if(!pmd_present(*pmd)) + return(ERR_PTR(-EINVAL)); + + pte = pte_offset_kernel(pmd, addr); + ptent = *pte; + if(!pte_present(ptent)) + return(ERR_PTR(-EINVAL)); + + if(pte_out != NULL) + *pte_out = ptent; + return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK)); +} - schedule_tail(current->thread.prev_sched); +char *current_cmd(void) +{ +#if defined(CONFIG_SMP) || defined(CONFIG_HIGHMEM) + return("(Unknown)"); +#else + void *addr = um_virt_to_phys(current, current->mm->arg_start, NULL); + return IS_ERR(addr) ? "(Unknown)": __va((unsigned long) addr); +#endif +} - /* XXX: if interrupt_end() calls schedule, this call to - * arch_switch_to_skas isn't needed. We could want to apply this to - * improve performance. -bb */ - arch_switch_to_skas(current->thread.prev_sched, current); +void force_sigbus(void) +{ + printk(KERN_ERR "Killing pid %d because of a lack of memory\n", + current->pid); + lock_kernel(); + sigaddset(¤t->pending.signal, SIGBUS); + recalc_sigpending(); + current->flags |= PF_SIGNALED; + do_exit(SIGBUS | 0x80); +} - current->thread.prev_sched = NULL; +void dump_thread(struct pt_regs *regs, struct user *u) +{ +} -/* Handle any immediate reschedules or signals */ - interrupt_end(); +void enable_hlt(void) +{ + panic("enable_hlt"); +} + +EXPORT_SYMBOL(enable_hlt); - userspace(¤t->thread.regs.regs); +void disable_hlt(void) +{ + panic("disable_hlt"); } -int copy_thread_skas(int nr, unsigned long clone_flags, unsigned long sp, - unsigned long stack_top, struct task_struct * p, - struct pt_regs *regs) +EXPORT_SYMBOL(disable_hlt); + +void *um_kmalloc(int size) { - void (*handler)(int); + return kmalloc(size, GFP_KERNEL); +} - if(current->thread.forking){ - memcpy(&p->thread.regs.regs.skas, ®s->regs.skas, - sizeof(p->thread.regs.regs.skas)); - REGS_SET_SYSCALL_RETURN(p->thread.regs.regs.skas.regs, 0); - if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp; +void *um_kmalloc_atomic(int size) +{ + return kmalloc(size, GFP_ATOMIC); +} - handler = fork_handler; +void *um_vmalloc(int size) +{ + return vmalloc(size); +} - arch_copy_thread(¤t->thread.arch, &p->thread.arch); - } - else { - init_thread_registers(&p->thread.regs.regs); - p->thread.request.u.thread = current->thread.request.u.thread; - handler = new_thread_handler; - } +void *um_vmalloc_atomic(int size) +{ + return __vmalloc(size, GFP_ATOMIC | __GFP_HIGHMEM, PAGE_KERNEL); +} - new_thread(task_stack_page(p), &p->thread.mode.skas.switch_buf, - &p->thread.mode.skas.fork_buf, handler); - return(0); +int __cant_sleep(void) { + return in_atomic() || irqs_disabled() || in_interrupt(); + /* Is in_interrupt() really needed? */ +} + +unsigned long get_fault_addr(void) +{ + return((unsigned long) current->thread.fault_addr); } -int new_mm(unsigned long stack) +EXPORT_SYMBOL(get_fault_addr); + +void not_implemented(void) { - int fd; + printk(KERN_DEBUG "Something isn't implemented in here\n"); +} - fd = os_open_file("/proc/mm", of_cloexec(of_write(OPENFLAGS())), 0); - if(fd < 0) - return(fd); +EXPORT_SYMBOL(not_implemented); - if(skas_needs_stub) - map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); +int user_context(unsigned long sp) +{ + unsigned long stack; - return(fd); + stack = sp & (PAGE_MASK << CONFIG_KERNEL_STACK_ORDER); + return(stack != (unsigned long) current_thread); } -void init_idle_skas(void) +extern exitcall_t __uml_exitcall_begin, __uml_exitcall_end; + +void do_uml_exitcalls(void) { - cpu_tasks[current_thread->cpu].pid = os_getpid(); - default_idle(); + exitcall_t *call; + + call = &__uml_exitcall_end; + while (--call >= &__uml_exitcall_begin) + (*call)(); } -extern void start_kernel(void); +char *uml_strdup(char *string) +{ + return kstrdup(string, GFP_KERNEL); +} -static int start_kernel_proc(void *unused) +int copy_to_user_proc(void __user *to, void *from, int size) { - int pid; + return(copy_to_user(to, from, size)); +} + +int copy_from_user_proc(void *to, void __user *from, int size) +{ + return(copy_from_user(to, from, size)); +} + +int clear_user_proc(void __user *buf, int size) +{ + return(clear_user(buf, size)); +} - block_signals(); - pid = os_getpid(); +int strlen_user_proc(char __user *str) +{ + return(strlen_user(str)); +} - cpu_tasks[0].pid = pid; - cpu_tasks[0].task = current; +int smp_sigio_handler(void) +{ #ifdef CONFIG_SMP - cpu_online_map = cpumask_of_cpu(0); + int cpu = current_thread->cpu; + IPI_handler(cpu); + if(cpu != 0) + return(1); #endif - start_kernel(); return(0); } -extern int userspace_pid[]; - -int start_uml_skas(void) +int cpu(void) { - if(proc_mm) - userspace_pid[0] = start_userspace(0); + return(current_thread->cpu); +} + +static atomic_t using_sysemu = ATOMIC_INIT(0); +int sysemu_supported; - init_new_thread_signals(); +void set_using_sysemu(int value) +{ + if (value > sysemu_supported) + return; + atomic_set(&using_sysemu, value); +} - init_task.thread.request.u.thread.proc = start_kernel_proc; - init_task.thread.request.u.thread.arg = NULL; - return(start_idle_thread(task_stack_page(&init_task), - &init_task.thread.mode.skas.switch_buf, - &init_task.thread.mode.skas.fork_buf)); +int get_using_sysemu(void) +{ + return atomic_read(&using_sysemu); } -int external_pid_skas(struct task_struct *task) +static int proc_read_sysemu(char *buf, char **start, off_t offset, int size,int *eof, void *data) { -#warning Need to look up userspace_pid by cpu - return(userspace_pid[0]); + if (snprintf(buf, size, "%d\n", get_using_sysemu()) < size) /*No overflow*/ + *eof = 1; + + return strlen(buf); } -int thread_pid_skas(struct task_struct *task) +static int proc_write_sysemu(struct file *file,const char __user *buf, unsigned long count,void *data) { -#warning Need to look up userspace_pid by cpu - return(userspace_pid[0]); + char tmp[2]; + + if (copy_from_user(tmp, buf, 1)) + return -EFAULT; + + if (tmp[0] >= '0' && tmp[0] <= '2') + set_using_sysemu(tmp[0] - '0'); + return count; /*We use the first char, but pretend to write everything*/ } -void kill_off_processes_skas(void) +int __init make_proc_sysemu(void) { - if(proc_mm) -#warning need to loop over userspace_pids in kill_off_processes_skas - os_kill_ptraced_process(userspace_pid[0], 1); - else { - struct task_struct *p; - int pid, me; + struct proc_dir_entry *ent; + if (!sysemu_supported) + return 0; - me = os_getpid(); - for_each_process(p){ - if(p->mm == NULL) - continue; + ent = create_proc_entry("sysemu", 0600, &proc_root); - pid = p->mm->context.skas.id.u.pid; - os_kill_ptraced_process(pid, 1); - } + if (ent == NULL) + { + printk(KERN_WARNING "Failed to register /proc/sysemu\n"); + return(0); } + + ent->read_proc = proc_read_sysemu; + ent->write_proc = proc_write_sysemu; + + return 0; } -unsigned long current_stub_stack(void) +late_initcall(make_proc_sysemu); + +int singlestepping(void * t) { - if(current->mm == NULL) + struct task_struct *task = t ? t : current; + + if ( ! (task->ptrace & PT_DTRACE) ) return(0); - return(current->mm->context.skas.id.stack); + if (task->thread.singlestep_syscall) + return(1); + + return 2; +} + +/* + * Only x86 and x86_64 have an arch_align_stack(). + * All other arches have "#define arch_align_stack(x) (x)" + * in their asm/system.h + * As this is included in UML from asm-um/system-generic.h, + * we can use it to behave as the subarch does. + */ +#ifndef arch_align_stack +unsigned long arch_align_stack(unsigned long sp) +{ + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) + sp -= get_random_int() % 8192; + return sp & ~0xf; } +#endif diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index 552ca1cb984..820affbf3e1 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -35,9 +35,6 @@ unsigned long long sched_clock(void) return (unsigned long long)jiffies_64 * (1000000000 / HZ); } -/* Changed at early boot */ -int timer_irq_inited = 0; - static unsigned long long prev_nsecs; #ifdef CONFIG_UML_REAL_TIME_CLOCK static long long delta; /* Deviation per interval */ @@ -98,7 +95,7 @@ irqreturn_t um_timer(int irq, void *dev, struct pt_regs *regs) do_timer(regs); - nsecs = get_time() + local_offset; + nsecs = get_time(); xtime.tv_sec = nsecs / NSEC_PER_SEC; xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC; @@ -113,12 +110,13 @@ static void register_timer(void) err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL); if(err != 0) - printk(KERN_ERR "timer_init : request_irq failed - " + printk(KERN_ERR "register_timer : request_irq failed - " "errno = %d\n", -err); - timer_irq_inited = 1; - - user_time_init(); + err = set_interval(1); + if(err != 0) + printk(KERN_ERR "register_timer : set_interval failed - " + "errno = %d\n", -err); } extern void (*late_time_init)(void); diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index f5b0636f9ad..54a5ff25645 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -16,12 +16,12 @@ #include "os.h" static int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, - int r, int w, int x, struct host_vm_op *ops, int *index, + int r, int w, int x, struct host_vm_op *ops, int *index, int last_filled, union mm_context *mmu, void **flush, int (*do_ops)(union mm_context *, struct host_vm_op *, int, int, void **)) { - __u64 offset; + __u64 offset; struct host_vm_op *last; int fd, ret = 0; @@ -89,7 +89,7 @@ static int add_munmap(unsigned long addr, unsigned long len, static int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x, struct host_vm_op *ops, int *index, int last_filled, union mm_context *mmu, void **flush, - int (*do_ops)(union mm_context *, struct host_vm_op *, + int (*do_ops)(union mm_context *, struct host_vm_op *, int, int, void **)) { struct host_vm_op *last; @@ -124,105 +124,105 @@ static int add_mprotect(unsigned long addr, unsigned long len, int r, int w, #define ADD_ROUND(n, inc) (((n) + (inc)) & ~((inc) - 1)) void fix_range_common(struct mm_struct *mm, unsigned long start_addr, - unsigned long end_addr, int force, + unsigned long end_addr, int force, int (*do_ops)(union mm_context *, struct host_vm_op *, int, int, void **)) { - pgd_t *npgd; - pud_t *npud; - pmd_t *npmd; - pte_t *npte; - union mm_context *mmu = &mm->context; - unsigned long addr, end; - int r, w, x; - struct host_vm_op ops[1]; - void *flush = NULL; - int op_index = -1, last_op = sizeof(ops) / sizeof(ops[0]) - 1; - int ret = 0; - - if(mm == NULL) return; - - ops[0].type = NONE; - for(addr = start_addr; addr < end_addr && !ret;){ - npgd = pgd_offset(mm, addr); - if(!pgd_present(*npgd)){ - end = ADD_ROUND(addr, PGDIR_SIZE); - if(end > end_addr) - end = end_addr; - if(force || pgd_newpage(*npgd)){ - ret = add_munmap(addr, end - addr, ops, - &op_index, last_op, mmu, - &flush, do_ops); - pgd_mkuptodate(*npgd); - } - addr = end; - continue; - } - - npud = pud_offset(npgd, addr); - if(!pud_present(*npud)){ - end = ADD_ROUND(addr, PUD_SIZE); - if(end > end_addr) - end = end_addr; - if(force || pud_newpage(*npud)){ - ret = add_munmap(addr, end - addr, ops, - &op_index, last_op, mmu, - &flush, do_ops); - pud_mkuptodate(*npud); - } - addr = end; - continue; - } - - npmd = pmd_offset(npud, addr); - if(!pmd_present(*npmd)){ - end = ADD_ROUND(addr, PMD_SIZE); - if(end > end_addr) - end = end_addr; - if(force || pmd_newpage(*npmd)){ - ret = add_munmap(addr, end - addr, ops, - &op_index, last_op, mmu, - &flush, do_ops); - pmd_mkuptodate(*npmd); - } - addr = end; - continue; - } - - npte = pte_offset_kernel(npmd, addr); - r = pte_read(*npte); - w = pte_write(*npte); - x = pte_exec(*npte); + pgd_t *npgd; + pud_t *npud; + pmd_t *npmd; + pte_t *npte; + union mm_context *mmu = &mm->context; + unsigned long addr, end; + int r, w, x; + struct host_vm_op ops[1]; + void *flush = NULL; + int op_index = -1, last_op = ARRAY_SIZE(ops) - 1; + int ret = 0; + + if(mm == NULL) + return; + + ops[0].type = NONE; + for(addr = start_addr; addr < end_addr && !ret;){ + npgd = pgd_offset(mm, addr); + if(!pgd_present(*npgd)){ + end = ADD_ROUND(addr, PGDIR_SIZE); + if(end > end_addr) + end = end_addr; + if(force || pgd_newpage(*npgd)){ + ret = add_munmap(addr, end - addr, ops, + &op_index, last_op, mmu, + &flush, do_ops); + pgd_mkuptodate(*npgd); + } + addr = end; + continue; + } + + npud = pud_offset(npgd, addr); + if(!pud_present(*npud)){ + end = ADD_ROUND(addr, PUD_SIZE); + if(end > end_addr) + end = end_addr; + if(force || pud_newpage(*npud)){ + ret = add_munmap(addr, end - addr, ops, + &op_index, last_op, mmu, + &flush, do_ops); + pud_mkuptodate(*npud); + } + addr = end; + continue; + } + + npmd = pmd_offset(npud, addr); + if(!pmd_present(*npmd)){ + end = ADD_ROUND(addr, PMD_SIZE); + if(end > end_addr) + end = end_addr; + if(force || pmd_newpage(*npmd)){ + ret = add_munmap(addr, end - addr, ops, + &op_index, last_op, mmu, + &flush, do_ops); + pmd_mkuptodate(*npmd); + } + addr = end; + continue; + } + + npte = pte_offset_kernel(npmd, addr); + r = pte_read(*npte); + w = pte_write(*npte); + x = pte_exec(*npte); if (!pte_young(*npte)) { r = 0; w = 0; } else if (!pte_dirty(*npte)) { w = 0; } - if(force || pte_newpage(*npte)){ - if(pte_present(*npte)) - ret = add_mmap(addr, - pte_val(*npte) & PAGE_MASK, - PAGE_SIZE, r, w, x, ops, - &op_index, last_op, mmu, - &flush, do_ops); + if(force || pte_newpage(*npte)){ + if(pte_present(*npte)) + ret = add_mmap(addr, + pte_val(*npte) & PAGE_MASK, + PAGE_SIZE, r, w, x, ops, + &op_index, last_op, mmu, + &flush, do_ops); else ret = add_munmap(addr, PAGE_SIZE, ops, &op_index, last_op, mmu, &flush, do_ops); - } - else if(pte_newprot(*npte)) + } + else if(pte_newprot(*npte)) ret = add_mprotect(addr, PAGE_SIZE, r, w, x, ops, &op_index, last_op, mmu, &flush, do_ops); - *npte = pte_mkuptodate(*npte); - addr += PAGE_SIZE; - } - + *npte = pte_mkuptodate(*npte); + addr += PAGE_SIZE; + } if(!ret) ret = (*do_ops)(mmu, ops, op_index, 1, &flush); - /* This is not an else because ret is modified above */ +/* This is not an else because ret is modified above */ if(ret) { printk("fix_range_common: failed, killing current process\n"); force_sig(SIGKILL, current); @@ -231,160 +231,160 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) { - struct mm_struct *mm; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned long addr, last; - int updated = 0, err; - - mm = &init_mm; - for(addr = start; addr < end;){ - pgd = pgd_offset(mm, addr); - if(!pgd_present(*pgd)){ - last = ADD_ROUND(addr, PGDIR_SIZE); - if(last > end) - last = end; - if(pgd_newpage(*pgd)){ - updated = 1; - err = os_unmap_memory((void *) addr, - last - addr); - if(err < 0) - panic("munmap failed, errno = %d\n", - -err); - } - addr = last; - continue; - } - - pud = pud_offset(pgd, addr); - if(!pud_present(*pud)){ - last = ADD_ROUND(addr, PUD_SIZE); - if(last > end) - last = end; - if(pud_newpage(*pud)){ - updated = 1; - err = os_unmap_memory((void *) addr, - last - addr); - if(err < 0) - panic("munmap failed, errno = %d\n", - -err); - } - addr = last; - continue; - } - - pmd = pmd_offset(pud, addr); - if(!pmd_present(*pmd)){ - last = ADD_ROUND(addr, PMD_SIZE); - if(last > end) - last = end; - if(pmd_newpage(*pmd)){ - updated = 1; - err = os_unmap_memory((void *) addr, - last - addr); - if(err < 0) - panic("munmap failed, errno = %d\n", - -err); - } - addr = last; - continue; - } - - pte = pte_offset_kernel(pmd, addr); - if(!pte_present(*pte) || pte_newpage(*pte)){ - updated = 1; - err = os_unmap_memory((void *) addr, - PAGE_SIZE); - if(err < 0) - panic("munmap failed, errno = %d\n", - -err); - if(pte_present(*pte)) - map_memory(addr, - pte_val(*pte) & PAGE_MASK, - PAGE_SIZE, 1, 1, 1); - } - else if(pte_newprot(*pte)){ - updated = 1; - os_protect_memory((void *) addr, PAGE_SIZE, 1, 1, 1); - } - addr += PAGE_SIZE; - } - return(updated); + struct mm_struct *mm; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + unsigned long addr, last; + int updated = 0, err; + + mm = &init_mm; + for(addr = start; addr < end;){ + pgd = pgd_offset(mm, addr); + if(!pgd_present(*pgd)){ + last = ADD_ROUND(addr, PGDIR_SIZE); + if(last > end) + last = end; + if(pgd_newpage(*pgd)){ + updated = 1; + err = os_unmap_memory((void *) addr, + last - addr); + if(err < 0) + panic("munmap failed, errno = %d\n", + -err); + } + addr = last; + continue; + } + + pud = pud_offset(pgd, addr); + if(!pud_present(*pud)){ + last = ADD_ROUND(addr, PUD_SIZE); + if(last > end) + last = end; + if(pud_newpage(*pud)){ + updated = 1; + err = os_unmap_memory((void *) addr, + last - addr); + if(err < 0) + panic("munmap failed, errno = %d\n", + -err); + } + addr = last; + continue; + } + + pmd = pmd_offset(pud, addr); + if(!pmd_present(*pmd)){ + last = ADD_ROUND(addr, PMD_SIZE); + if(last > end) + last = end; + if(pmd_newpage(*pmd)){ + updated = 1; + err = os_unmap_memory((void *) addr, + last - addr); + if(err < 0) + panic("munmap failed, errno = %d\n", + -err); + } + addr = last; + continue; + } + + pte = pte_offset_kernel(pmd, addr); + if(!pte_present(*pte) || pte_newpage(*pte)){ + updated = 1; + err = os_unmap_memory((void *) addr, + PAGE_SIZE); + if(err < 0) + panic("munmap failed, errno = %d\n", + -err); + if(pte_present(*pte)) + map_memory(addr, + pte_val(*pte) & PAGE_MASK, + PAGE_SIZE, 1, 1, 1); + } + else if(pte_newprot(*pte)){ + updated = 1; + os_protect_memory((void *) addr, PAGE_SIZE, 1, 1, 1); + } + addr += PAGE_SIZE; + } + return(updated); } pgd_t *pgd_offset_proc(struct mm_struct *mm, unsigned long address) { - return(pgd_offset(mm, address)); + return(pgd_offset(mm, address)); } pud_t *pud_offset_proc(pgd_t *pgd, unsigned long address) { - return(pud_offset(pgd, address)); + return(pud_offset(pgd, address)); } pmd_t *pmd_offset_proc(pud_t *pud, unsigned long address) { - return(pmd_offset(pud, address)); + return(pmd_offset(pud, address)); } pte_t *pte_offset_proc(pmd_t *pmd, unsigned long address) { - return(pte_offset_kernel(pmd, address)); + return(pte_offset_kernel(pmd, address)); } pte_t *addr_pte(struct task_struct *task, unsigned long addr) { - pgd_t *pgd = pgd_offset(task->mm, addr); - pud_t *pud = pud_offset(pgd, addr); - pmd_t *pmd = pmd_offset(pud, addr); + pgd_t *pgd = pgd_offset(task->mm, addr); + pud_t *pud = pud_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); - return(pte_offset_map(pmd, addr)); + return(pte_offset_map(pmd, addr)); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) { - address &= PAGE_MASK; - flush_tlb_range(vma, address, address + PAGE_SIZE); + address &= PAGE_MASK; + flush_tlb_range(vma, address, address + PAGE_SIZE); } void flush_tlb_all(void) { - flush_tlb_mm(current->mm); + flush_tlb_mm(current->mm); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) { - CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt, - flush_tlb_kernel_range_common, start, end); + CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt, + flush_tlb_kernel_range_common, start, end); } void flush_tlb_kernel_vm(void) { - CHOOSE_MODE(flush_tlb_kernel_vm_tt(), - flush_tlb_kernel_range_common(start_vm, end_vm)); + CHOOSE_MODE(flush_tlb_kernel_vm_tt(), + flush_tlb_kernel_range_common(start_vm, end_vm)); } void __flush_tlb_one(unsigned long addr) { - CHOOSE_MODE_PROC(__flush_tlb_one_tt, __flush_tlb_one_skas, addr); + CHOOSE_MODE_PROC(__flush_tlb_one_tt, __flush_tlb_one_skas, addr); } void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - CHOOSE_MODE_PROC(flush_tlb_range_tt, flush_tlb_range_skas, vma, start, - end); + CHOOSE_MODE_PROC(flush_tlb_range_tt, flush_tlb_range_skas, vma, start, + end); } void flush_tlb_mm(struct mm_struct *mm) { - CHOOSE_MODE_PROC(flush_tlb_mm_tt, flush_tlb_mm_skas, mm); + CHOOSE_MODE_PROC(flush_tlb_mm_tt, flush_tlb_mm_skas, mm); } void force_flush_all(void) { - CHOOSE_MODE(force_flush_all_tt(), force_flush_all_skas()); + CHOOSE_MODE(force_flush_all_tt(), force_flush_all_skas()); } diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index ac70fa5a2e2..61a23fff439 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -140,14 +140,6 @@ void segv_handler(int sig, union uml_pt_regs *regs) segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs); } -struct kern_handlers handlinfo_kern = { - .relay_signal = relay_signal, - .winch = winch, - .bus_handler = relay_signal, - .page_fault = segv_handler, - .sigio_handler = sigio_handler, - .timer_handler = timer_handler -}; /* * We give a *copy* of the faultinfo in the regs to segv. * This must be done, since nesting SEGVs could overwrite @@ -227,9 +219,16 @@ void bad_segv(struct faultinfo fi, unsigned long ip) void relay_signal(int sig, union uml_pt_regs *regs) { - if(arch_handle_signal(sig, regs)) return; - if(!UPT_IS_USER(regs)) + if(arch_handle_signal(sig, regs)) + return; + + if(!UPT_IS_USER(regs)){ + if(sig == SIGBUS) + printk("Bus error - the /dev/shm or /tmp mount likely " + "just ran out of space\n"); panic("Kernel mode signal %d", sig); + } + current->thread.arch.faultinfo = *UPT_FAULTINFO(regs); force_sig(sig, current); } @@ -246,6 +245,15 @@ void winch(int sig, union uml_pt_regs *regs) do_IRQ(WINCH_IRQ, regs); } +const struct kern_handlers handlinfo_kern = { + .relay_signal = relay_signal, + .winch = winch, + .bus_handler = bus_handler, + .page_fault = segv_handler, + .sigio_handler = sigio_handler, + .timer_handler = timer_handler +}; + void trap_init(void) { } diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 7896cf98232..55005710dcb 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -106,7 +106,7 @@ static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index f4bfc4c7cca..b4183929b32 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -4,15 +4,19 @@ # obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \ - signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o tls.o \ + signal.o start_up.o time.o trap.o tty.o uaccess.o umid.o tls.o \ user_syms.o util.o drivers/ sys-$(SUBARCH)/ obj-$(CONFIG_MODE_SKAS) += skas/ + +obj-$(CONFIG_MODE_TT) += tt.o +user-objs-$(CONFIG_MODE_TT) += tt.o + obj-$(CONFIG_TTY_LOG) += tty_log.o user-objs-$(CONFIG_TTY_LOG) += tty_log.o USER_OBJS := $(user-objs-y) aio.o elf_aux.o file.o helper.o irq.o main.o mem.o \ - process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o tls.o \ + process.o sigio.o signal.o start_up.o time.o trap.o tty.o tls.o \ uaccess.o umid.o util.o CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH) diff --git a/arch/um/os-Linux/drivers/etap.h b/arch/um/os-Linux/drivers/etap.h index b84f6c4740f..57ecdaf2f67 100644 --- a/arch/um/os-Linux/drivers/etap.h +++ b/arch/um/os-Linux/drivers/etap.h @@ -13,7 +13,7 @@ struct ethertap_data { void *dev; }; -extern struct net_user_info ethertap_user_info; +extern const struct net_user_info ethertap_user_info; /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/arch/um/os-Linux/drivers/ethertap_kern.c b/arch/um/os-Linux/drivers/ethertap_kern.c index 768606bec23..16385e2ada8 100644 --- a/arch/um/os-Linux/drivers/ethertap_kern.c +++ b/arch/um/os-Linux/drivers/ethertap_kern.c @@ -65,7 +65,7 @@ static int etap_write(int fd, struct sk_buff **skb, struct uml_net_private *lp) return(net_send(fd, (*skb)->data, (*skb)->len)); } -struct net_kern_info ethertap_kern_info = { +const struct net_kern_info ethertap_kern_info = { .init = etap_init, .protocol = eth_protocol, .read = etap_read, diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index 8f49507e64e..f559bdf746e 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -216,7 +216,7 @@ static void etap_del_addr(unsigned char *addr, unsigned char *netmask, etap_close_addr(addr, netmask, &pri->control_fd); } -struct net_user_info ethertap_user_info = { +const struct net_user_info ethertap_user_info = { .init = etap_user_init, .open = etap_open, .close = etap_close, diff --git a/arch/um/os-Linux/drivers/tuntap.h b/arch/um/os-Linux/drivers/tuntap.h index 25d4a286881..d3e8d3af624 100644 --- a/arch/um/os-Linux/drivers/tuntap.h +++ b/arch/um/os-Linux/drivers/tuntap.h @@ -16,7 +16,7 @@ struct tuntap_data { void *dev; }; -extern struct net_user_info tuntap_user_info; +extern const struct net_user_info tuntap_user_info; #endif diff --git a/arch/um/os-Linux/drivers/tuntap_kern.c b/arch/um/os-Linux/drivers/tuntap_kern.c index 190009a6f89..0edbac63c52 100644 --- a/arch/um/os-Linux/drivers/tuntap_kern.c +++ b/arch/um/os-Linux/drivers/tuntap_kern.c @@ -53,7 +53,7 @@ static int tuntap_write(int fd, struct sk_buff **skb, return(net_write(fd, (*skb)->data, (*skb)->len)); } -struct net_kern_info tuntap_kern_info = { +const struct net_kern_info tuntap_kern_info = { .init = tuntap_init, .protocol = eth_protocol, .read = tuntap_read, diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 87c3aa0252d..e846b23f755 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -205,7 +205,7 @@ static int tuntap_set_mtu(int mtu, void *data) return(mtu); } -struct net_user_info tuntap_user_info = { +const struct net_user_info tuntap_user_info = { .init = tuntap_user_init, .open = tuntap_open, .close = tuntap_close, diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 6987d1d247a..cd15b9df5b5 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -42,7 +42,7 @@ static int helper_child(void *arg) if(data->pre_exec != NULL) (*data->pre_exec)(data->pre_data); execvp(argv[0], argv); - errval = errno; + errval = -errno; printk("helper_child - execve of '%s' failed - errno = %d\n", argv[0], errno); os_write_file(data->fd, &errval, sizeof(errval)); kill(os_getpid(), SIGKILL); @@ -62,7 +62,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, stack = *stack_out; else stack = alloc_stack(0, __cant_sleep()); if(stack == 0) - return(-ENOMEM); + return -ENOMEM; ret = os_pipe(fds, 1, 0); if(ret < 0){ @@ -95,16 +95,16 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, /* Read the errno value from the child, if the exec failed, or get 0 if * the exec succeeded because the pipe fd was set as close-on-exec. */ n = os_read_file(fds[0], &ret, sizeof(ret)); - if (n < 0) { - printk("run_helper : read on pipe failed, ret = %d\n", -n); - ret = n; - kill(pid, SIGKILL); - CATCH_EINTR(waitpid(pid, NULL, 0)); - } else if(n != 0){ - CATCH_EINTR(n = waitpid(pid, NULL, 0)); - ret = -errno; - } else { + if(n == 0) ret = pid; + else { + if(n < 0){ + printk("run_helper : read on pipe failed, ret = %d\n", + -n); + ret = n; + kill(pid, SIGKILL); + } + CATCH_EINTR(waitpid(pid, NULL, 0)); } out_close: diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c index 7555bf9c33d..a97206df5b5 100644 --- a/arch/um/os-Linux/irq.c +++ b/arch/um/os-Linux/irq.c @@ -132,7 +132,7 @@ void os_set_pollfd(int i, int fd) void os_set_ioignore(void) { - set_handler(SIGIO, SIG_IGN, 0, -1); + signal(SIGIO, SIG_IGN); } void init_irq_signals(int on_sigstack) diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index 90912aaca7a..d1c5670787d 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -67,13 +67,32 @@ static __init void do_uml_initcalls(void) static void last_ditch_exit(int sig) { - signal(SIGINT, SIG_DFL); - signal(SIGTERM, SIG_DFL); - signal(SIGHUP, SIG_DFL); uml_cleanup(); exit(1); } +static void install_fatal_handler(int sig) +{ + struct sigaction action; + + /* All signals are enabled in this handler ... */ + sigemptyset(&action.sa_mask); + + /* ... including the signal being handled, plus we want the + * handler reset to the default behavior, so that if an exit + * handler is hanging for some reason, the UML will just die + * after this signal is sent a second time. + */ + action.sa_flags = SA_RESETHAND | SA_NODEFER; + action.sa_restorer = NULL; + action.sa_handler = last_ditch_exit; + if(sigaction(sig, &action, NULL) < 0){ + printf("failed to install handler for signal %d - errno = %d\n", + errno); + exit(1); + } +} + #define UML_LIB_PATH ":/usr/lib/uml" static void setup_env_path(void) @@ -158,9 +177,12 @@ int main(int argc, char **argv, char **envp) } new_argv[argc] = NULL; - set_handler(SIGINT, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1); - set_handler(SIGTERM, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1); - set_handler(SIGHUP, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1); + /* Allow these signals to bring down a UML if all other + * methods of control fail. + */ + install_fatal_handler(SIGINT); + install_fatal_handler(SIGTERM); + install_fatal_handler(SIGHUP); scan_elf_aux( envp); diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 560c8063c77..b170b4704dc 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -114,14 +114,14 @@ static void which_tmpdir(void) } while(1){ - found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), ' '); + found = next(fd, buf, ARRAY_SIZE(buf), ' '); if(found != 1) break; if(!strncmp(buf, "/dev/shm", strlen("/dev/shm"))) goto found; - found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), '\n'); + found = next(fd, buf, ARRAY_SIZE(buf), '\n'); if(found != 1) break; } @@ -135,7 +135,7 @@ err: return; found: - found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), ' '); + found = next(fd, buf, ARRAY_SIZE(buf), ' '); if(found != 1) goto err; diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index b98d3ca2cd1..ff203625a4b 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -7,7 +7,6 @@ #include <stdio.h> #include <errno.h> #include <signal.h> -#include <setjmp.h> #include <linux/unistd.h> #include <sys/mman.h> #include <sys/wait.h> @@ -247,7 +246,17 @@ void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)) set_sigstack(sig_stack, pages * page_size()); flags = SA_ONSTACK; } - if(usr1_handler) set_handler(SIGUSR1, usr1_handler, flags, -1); + if(usr1_handler){ + struct sigaction sa; + + sa.sa_handler = usr1_handler; + sigemptyset(&sa.sa_mask); + sa.sa_flags = flags; + sa.sa_restorer = NULL; + if(sigaction(SIGUSR1, &sa, NULL) < 0) + panic("init_new_thread_stack - sigaction failed - " + "errno = %d\n", errno); + } } void init_new_thread_signals(void) diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c index 0ecac563c7b..f6457765b17 100644 --- a/arch/um/os-Linux/sigio.c +++ b/arch/um/os-Linux/sigio.c @@ -43,17 +43,9 @@ struct pollfds { /* Protected by sigio_lock(). Used by the sigio thread, but the UML thread * synchronizes with it. */ -static struct pollfds current_poll = { - .poll = NULL, - .size = 0, - .used = 0 -}; - -static struct pollfds next_poll = { - .poll = NULL, - .size = 0, - .used = 0 -}; +static struct pollfds current_poll; +static struct pollfds next_poll; +static struct pollfds all_sigio_fds; static int write_sigio_thread(void *unused) { @@ -78,7 +70,8 @@ static int write_sigio_thread(void *unused) n = os_read_file(sigio_private[1], &c, sizeof(c)); if(n != sizeof(c)) printk("write_sigio_thread : " - "read failed, err = %d\n", -n); + "read on socket failed, " + "err = %d\n", -n); tmp = current_poll; current_poll = next_poll; next_poll = tmp; @@ -93,35 +86,36 @@ static int write_sigio_thread(void *unused) n = os_write_file(respond_fd, &c, sizeof(c)); if(n != sizeof(c)) - printk("write_sigio_thread : write failed, " - "err = %d\n", -n); + printk("write_sigio_thread : write on socket " + "failed, err = %d\n", -n); } } return 0; } -static int need_poll(int n) +static int need_poll(struct pollfds *polls, int n) { - if(n <= next_poll.size){ - next_poll.used = n; - return(0); + if(n <= polls->size){ + polls->used = n; + return 0; } - kfree(next_poll.poll); - next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); - if(next_poll.poll == NULL){ + kfree(polls->poll); + polls->poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); + if(polls->poll == NULL){ printk("need_poll : failed to allocate new pollfds\n"); - next_poll.size = 0; - next_poll.used = 0; - return(-1); + polls->size = 0; + polls->used = 0; + return -ENOMEM; } - next_poll.size = n; - next_poll.used = n; - return(0); + polls->size = n; + polls->used = n; + return 0; } /* Must be called with sigio_lock held, because it's needed by the marked - * critical section. */ + * critical section. + */ static void update_thread(void) { unsigned long flags; @@ -156,34 +150,39 @@ static void update_thread(void) set_signals(flags); } -static int add_sigio_fd(int fd, int read) +int add_sigio_fd(int fd) { - int err = 0, i, n, events; + struct pollfd *p; + int err = 0, i, n; sigio_lock(); + for(i = 0; i < all_sigio_fds.used; i++){ + if(all_sigio_fds.poll[i].fd == fd) + break; + } + if(i == all_sigio_fds.used) + goto out; + + p = &all_sigio_fds.poll[i]; + for(i = 0; i < current_poll.used; i++){ if(current_poll.poll[i].fd == fd) goto out; } n = current_poll.used + 1; - err = need_poll(n); + err = need_poll(&next_poll, n); if(err) goto out; for(i = 0; i < current_poll.used; i++) next_poll.poll[i] = current_poll.poll[i]; - if(read) events = POLLIN; - else events = POLLOUT; - - next_poll.poll[n - 1] = ((struct pollfd) { .fd = fd, - .events = events, - .revents = 0 }); + next_poll.poll[n - 1] = *p; update_thread(); out: sigio_unlock(); - return(err); + return err; } int ignore_sigio_fd(int fd) @@ -205,18 +204,14 @@ int ignore_sigio_fd(int fd) if(i == current_poll.used) goto out; - err = need_poll(current_poll.used - 1); + err = need_poll(&next_poll, current_poll.used - 1); if(err) goto out; for(i = 0; i < current_poll.used; i++){ p = ¤t_poll.poll[i]; - if(p->fd != fd) next_poll.poll[n++] = current_poll.poll[i]; - } - if(n == i){ - printk("ignore_sigio_fd : fd %d not found\n", fd); - err = -1; - goto out; + if(p->fd != fd) + next_poll.poll[n++] = *p; } update_thread(); @@ -234,7 +229,7 @@ static struct pollfd *setup_initial_poll(int fd) printk("setup_initial_poll : failed to allocate poll\n"); return NULL; } - *p = ((struct pollfd) { .fd = fd, + *p = ((struct pollfd) { .fd = fd, .events = POLLIN, .revents = 0 }); return p; @@ -323,6 +318,8 @@ out_close1: void maybe_sigio_broken(int fd, int read) { + int err; + if(!isatty(fd)) return; @@ -330,7 +327,19 @@ void maybe_sigio_broken(int fd, int read) return; write_sigio_workaround(); - add_sigio_fd(fd, read); + + sigio_lock(); + err = need_poll(&all_sigio_fds, all_sigio_fds.used + 1); + if(err){ + printk("maybe_sigio_broken - failed to add pollfd\n"); + goto out; + } + all_sigio_fds.poll[all_sigio_fds.used++] = + ((struct pollfd) { .fd = fd, + .events = read ? POLLIN : POLLOUT, + .revents = 0 }); +out: + sigio_unlock(); } static void sigio_cleanup(void) diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c index 60e4faedf25..6b81739279d 100644 --- a/arch/um/os-Linux/signal.c +++ b/arch/um/os-Linux/signal.c @@ -15,7 +15,6 @@ #include "user.h" #include "signal_kern.h" #include "sysdep/sigcontext.h" -#include "sysdep/signal.h" #include "sigcontext.h" #include "mode.h" #include "os.h" @@ -38,18 +37,10 @@ static int signals_enabled = 1; static int pending = 0; -void sig_handler(ARCH_SIGHDLR_PARAM) +void sig_handler(int sig, struct sigcontext *sc) { - struct sigcontext *sc; int enabled; - /* Must be the first thing that this handler does - x86_64 stores - * the sigcontext in %rdx, and we need to save it before it has a - * chance to get trashed. - */ - - ARCH_GET_SIGCONTEXT(sc, sig); - enabled = signals_enabled; if(!enabled && (sig == SIGIO)){ pending |= SIGIO_MASK; @@ -64,15 +55,8 @@ void sig_handler(ARCH_SIGHDLR_PARAM) set_signals(enabled); } -extern int timer_irq_inited; - static void real_alarm_handler(int sig, struct sigcontext *sc) { - if(!timer_irq_inited){ - signals_enabled = 1; - return; - } - if(sig == SIGALRM) switch_timers(0); @@ -84,13 +68,10 @@ static void real_alarm_handler(int sig, struct sigcontext *sc) } -void alarm_handler(ARCH_SIGHDLR_PARAM) +void alarm_handler(int sig, struct sigcontext *sc) { - struct sigcontext *sc; int enabled; - ARCH_GET_SIGCONTEXT(sc, sig); - enabled = signals_enabled; if(!signals_enabled){ if(sig == SIGVTALRM) @@ -126,6 +107,10 @@ void remove_sigstack(void) panic("disabling signal stack failed, errno = %d\n", errno); } +void (*handlers[_NSIG])(int sig, struct sigcontext *sc); + +extern void hard_handler(int sig); + void set_handler(int sig, void (*handler)(int), int flags, ...) { struct sigaction action; @@ -133,13 +118,16 @@ void set_handler(int sig, void (*handler)(int), int flags, ...) sigset_t sig_mask; int mask; - va_start(ap, flags); - action.sa_handler = handler; + handlers[sig] = (void (*)(int, struct sigcontext *)) handler; + action.sa_handler = hard_handler; + sigemptyset(&action.sa_mask); - while((mask = va_arg(ap, int)) != -1){ + + va_start(ap, flags); + while((mask = va_arg(ap, int)) != -1) sigaddset(&action.sa_mask, mask); - } va_end(ap); + action.sa_flags = flags; action.sa_restorer = NULL; if(sigaction(sig, &action, NULL) < 0) diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 7baf90fda58..cb9ab54146c 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -8,7 +8,6 @@ #include <unistd.h> #include <errno.h> #include <signal.h> -#include <setjmp.h> #include <sched.h> #include "ptrace_user.h" #include <sys/wait.h> @@ -156,11 +155,15 @@ extern int __syscall_stub_start; static int userspace_tramp(void *stack) { void *addr; + int err; ptrace(PTRACE_TRACEME, 0, 0, 0); init_new_thread_signals(); - enable_timer(); + err = set_interval(1); + if(err) + panic("userspace_tramp - setting timer failed, errno = %d\n", + err); if(!proc_mm){ /* This has a pte, but it can't be mapped in with the usual @@ -190,14 +193,25 @@ static int userspace_tramp(void *stack) } } if(!ptrace_faultinfo && (stack != NULL)){ + struct sigaction sa; + unsigned long v = UML_CONFIG_STUB_CODE + (unsigned long) stub_segv_handler - (unsigned long) &__syscall_stub_start; set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size()); - set_handler(SIGSEGV, (void *) v, SA_ONSTACK, - SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, - SIGUSR1, -1); + sigemptyset(&sa.sa_mask); + sigaddset(&sa.sa_mask, SIGIO); + sigaddset(&sa.sa_mask, SIGWINCH); + sigaddset(&sa.sa_mask, SIGALRM); + sigaddset(&sa.sa_mask, SIGVTALRM); + sigaddset(&sa.sa_mask, SIGUSR1); + sa.sa_flags = SA_ONSTACK; + sa.sa_handler = (void *) v; + sa.sa_restorer = NULL; + if(sigaction(SIGSEGV, &sa, NULL) < 0) + panic("userspace_tramp - setting SIGSEGV handler " + "failed - errno = %d\n", errno); } os_stop_process(os_getpid()); @@ -430,56 +444,22 @@ void map_stub_pages(int fd, unsigned long code, } } -void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, - void (*handler)(int)) +void new_thread(void *stack, jmp_buf *buf, void (*handler)(void)) { - unsigned long flags; - jmp_buf switch_buf, fork_buf; - - *switch_buf_ptr = &switch_buf; - *fork_buf_ptr = &fork_buf; - - /* Somewhat subtle - siglongjmp restores the signal mask before doing - * the longjmp. This means that when jumping from one stack to another - * when the target stack has interrupts enabled, an interrupt may occur - * on the source stack. This is bad when starting up a process because - * it's not supposed to get timer ticks until it has been scheduled. - * So, we disable interrupts around the sigsetjmp to ensure that - * they can't happen until we get back here where they are safe. - */ - flags = get_signals(); - block_signals(); - if(UML_SETJMP(&fork_buf) == 0) - new_thread_proc(stack, handler); - - remove_sigstack(); - - set_signals(flags); + (*buf)[0].JB_IP = (unsigned long) handler; + (*buf)[0].JB_SP = (unsigned long) stack + + (PAGE_SIZE << UML_CONFIG_KERNEL_STACK_ORDER) - sizeof(void *); } #define INIT_JMP_NEW_THREAD 0 -#define INIT_JMP_REMOVE_SIGSTACK 1 -#define INIT_JMP_CALLBACK 2 -#define INIT_JMP_HALT 3 -#define INIT_JMP_REBOOT 4 +#define INIT_JMP_CALLBACK 1 +#define INIT_JMP_HALT 2 +#define INIT_JMP_REBOOT 3 -void thread_wait(void *sw, void *fb) +void switch_threads(jmp_buf *me, jmp_buf *you) { - jmp_buf buf, **switch_buf = sw, *fork_buf; - - *switch_buf = &buf; - fork_buf = fb; - if(UML_SETJMP(&buf) == 0) - siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK); -} - -void switch_threads(void *me, void *next) -{ - jmp_buf my_buf, **me_ptr = me, *next_buf = next; - - *me_ptr = &my_buf; - if(UML_SETJMP(&my_buf) == 0) - UML_LONGJMP(next_buf, 1); + if(UML_SETJMP(me) == 0) + UML_LONGJMP(you, 1); } static jmp_buf initial_jmpbuf; @@ -489,23 +469,21 @@ static void (*cb_proc)(void *arg); static void *cb_arg; static jmp_buf *cb_back; -int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) +int start_idle_thread(void *stack, jmp_buf *switch_buf) { - jmp_buf **switch_buf = switch_buf_ptr; int n; set_handler(SIGWINCH, (__sighandler_t) sig_handler, SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM, SIGVTALRM, -1); - *fork_buf_ptr = &initial_jmpbuf; n = UML_SETJMP(&initial_jmpbuf); switch(n){ case INIT_JMP_NEW_THREAD: - new_thread_proc((void *) stack, new_thread_handler); - break; - case INIT_JMP_REMOVE_SIGSTACK: - remove_sigstack(); + (*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler; + (*switch_buf)[0].JB_SP = (unsigned long) stack + + (PAGE_SIZE << UML_CONFIG_KERNEL_STACK_ORDER) - + sizeof(void *); break; case INIT_JMP_CALLBACK: (*cb_proc)(cb_arg); @@ -520,7 +498,7 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) default: panic("Bad sigsetjmp return in start_idle_thread - %d\n", n); } - UML_LONGJMP(*switch_buf, 1); + UML_LONGJMP(switch_buf, 1); } void initial_thread_cb_skas(void (*proc)(void *), void *arg) diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 50314850400..7fe92680c7d 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -14,7 +14,6 @@ #include <sched.h> #include <fcntl.h> #include <errno.h> -#include <setjmp.h> #include <sys/time.h> #include <sys/wait.h> #include <sys/mman.h> diff --git a/arch/um/os-Linux/sys-i386/Makefile b/arch/um/os-Linux/sys-i386/Makefile index b3213613c41..37806621b25 100644 --- a/arch/um/os-Linux/sys-i386/Makefile +++ b/arch/um/os-Linux/sys-i386/Makefile @@ -3,7 +3,7 @@ # Licensed under the GPL # -obj-$(CONFIG_MODE_SKAS) = registers.o tls.o +obj-$(CONFIG_MODE_SKAS) = registers.o signal.o tls.o USER_OBJS := $(obj-y) diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index 516f66dd87e..7cd0369e02b 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -5,12 +5,12 @@ #include <errno.h> #include <string.h> -#include <setjmp.h> #include "sysdep/ptrace_user.h" #include "sysdep/ptrace.h" #include "uml-config.h" #include "skas_ptregs.h" #include "registers.h" +#include "longjmp.h" #include "user.h" /* These are set once at boot time and not changed thereafter */ @@ -130,11 +130,14 @@ void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) HOST_FP_SIZE * sizeof(unsigned long)); } -void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer) +unsigned long get_thread_reg(int reg, jmp_buf *buf) { - struct __jmp_buf_tag *jmpbuf = buffer; - - UPT_SET(uml_regs, EIP, jmpbuf->__jmpbuf[JB_PC]); - UPT_SET(uml_regs, UESP, jmpbuf->__jmpbuf[JB_SP]); - UPT_SET(uml_regs, EBP, jmpbuf->__jmpbuf[JB_BP]); + switch(reg){ + case EIP: return buf[0]->__eip; + case UESP: return buf[0]->__esp; + case EBP: return buf[0]->__ebp; + default: + printk("get_thread_regs - unknown register %d\n", reg); + return 0; + } } diff --git a/arch/um/os-Linux/sys-i386/signal.c b/arch/um/os-Linux/sys-i386/signal.c new file mode 100644 index 00000000000..0d3eae51835 --- /dev/null +++ b/arch/um/os-Linux/sys-i386/signal.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include <signal.h> + +extern void (*handlers[])(int sig, struct sigcontext *sc); + +void hard_handler(int sig) +{ + struct sigcontext *sc = (struct sigcontext *) (&sig + 1); + + (*handlers[sig])(sig, sc); +} diff --git a/arch/um/os-Linux/sys-x86_64/Makefile b/arch/um/os-Linux/sys-x86_64/Makefile index 340ef26f594..f67842a7735 100644 --- a/arch/um/os-Linux/sys-x86_64/Makefile +++ b/arch/um/os-Linux/sys-x86_64/Makefile @@ -3,7 +3,7 @@ # Licensed under the GPL # -obj-$(CONFIG_MODE_SKAS) = registers.o +obj-$(CONFIG_MODE_SKAS) = registers.o signal.o USER_OBJS := $(obj-y) diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c index becd898d939..cb8e8a26328 100644 --- a/arch/um/os-Linux/sys-x86_64/registers.c +++ b/arch/um/os-Linux/sys-x86_64/registers.c @@ -5,11 +5,11 @@ #include <errno.h> #include <string.h> -#include <setjmp.h> #include "ptrace_user.h" #include "uml-config.h" #include "skas_ptregs.h" #include "registers.h" +#include "longjmp.h" #include "user.h" /* These are set once at boot time and not changed thereafter */ @@ -78,11 +78,14 @@ void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) HOST_FP_SIZE * sizeof(unsigned long)); } -void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer) +unsigned long get_thread_reg(int reg, jmp_buf *buf) { - struct __jmp_buf_tag *jmpbuf = buffer; - - UPT_SET(uml_regs, RIP, jmpbuf->__jmpbuf[JB_PC]); - UPT_SET(uml_regs, RSP, jmpbuf->__jmpbuf[JB_RSP]); - UPT_SET(uml_regs, RBP, jmpbuf->__jmpbuf[JB_RBP]); + switch(reg){ + case RIP: return buf[0]->__rip; + case RSP: return buf[0]->__rsp; + case RBP: return buf[0]->__rbp; + default: + printk("get_thread_regs - unknown register %d\n", reg); + return 0; + } } diff --git a/arch/um/os-Linux/sys-x86_64/signal.c b/arch/um/os-Linux/sys-x86_64/signal.c new file mode 100644 index 00000000000..3f369e5f976 --- /dev/null +++ b/arch/um/os-Linux/sys-x86_64/signal.c @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include <signal.h> + +extern void (*handlers[])(int sig, struct sigcontext *sc); + +void hard_handler(int sig) +{ + struct ucontext *uc; + asm("movq %%rdx, %0" : "=r" (uc)); + + (*handlers[sig])(sig, (struct sigcontext *) &uc->uc_mcontext); +} diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index 4ae73c0e548..38be096e750 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -17,20 +17,25 @@ #include "kern_constants.h" #include "os.h" -static void set_interval(int timer_type) +int set_interval(int is_virtual) { int usec = 1000000/hz(); + int timer_type = is_virtual ? ITIMER_VIRTUAL : ITIMER_REAL; struct itimerval interval = ((struct itimerval) { { 0, usec }, { 0, usec } }); if(setitimer(timer_type, &interval, NULL) == -1) - panic("setitimer failed - errno = %d\n", errno); + return -errno; + + return 0; } +#ifdef CONFIG_MODE_TT void enable_timer(void) { - set_interval(ITIMER_VIRTUAL); + set_interval(1); } +#endif void disable_timer(void) { @@ -40,8 +45,8 @@ void disable_timer(void) printk("disnable_timer - setitimer failed, errno = %d\n", errno); /* If there are signals already queued, after unblocking ignore them */ - set_handler(SIGALRM, SIG_IGN, 0, -1); - set_handler(SIGVTALRM, SIG_IGN, 0, -1); + signal(SIGALRM, SIG_IGN); + signal(SIGVTALRM, SIG_IGN); } void switch_timers(int to_real) @@ -74,7 +79,7 @@ void uml_idle_timer(void) set_handler(SIGALRM, (__sighandler_t) alarm_handler, SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1); - set_interval(ITIMER_REAL); + set_interval(0); } #endif @@ -94,8 +99,3 @@ void idle_sleep(int secs) ts.tv_nsec = 0; nanosleep(&ts, NULL); } - -void user_time_init(void) -{ - set_interval(ITIMER_VIRTUAL); -} diff --git a/arch/um/os-Linux/trap.c b/arch/um/os-Linux/trap.c index 90b29ae9af4..1df231a2624 100644 --- a/arch/um/os-Linux/trap.c +++ b/arch/um/os-Linux/trap.c @@ -5,7 +5,6 @@ #include <stdlib.h> #include <signal.h> -#include <setjmp.h> #include "kern_util.h" #include "user_util.h" #include "os.h" diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c index 865f6a6a259..bbb73a65037 100644 --- a/arch/um/os-Linux/uaccess.c +++ b/arch/um/os-Linux/uaccess.c @@ -4,8 +4,7 @@ * Licensed under the GPL */ -#include <setjmp.h> -#include <string.h> +#include <stddef.h> #include "longjmp.h" unsigned long __do_user_copy(void *to, const void *from, int n, diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index c47a2a7ce70..3f5b1514e8a 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -7,7 +7,6 @@ #include <stdlib.h> #include <unistd.h> #include <limits.h> -#include <setjmp.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/utsname.h> @@ -107,11 +106,11 @@ int setjmp_wrapper(void (*proc)(void *, void *), ...) jmp_buf buf; int n; - n = sigsetjmp(buf, 1); + n = UML_SETJMP(&buf); if(n == 0){ va_start(args, proc); (*proc)(&buf, &args); } va_end(args); - return(n); + return n; } diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 374d61a1943..0e32adf03be 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -1,10 +1,10 @@ obj-y = bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \ - ptrace_user.o signal.o sigcontext.o syscalls.o sysrq.o \ + ptrace_user.o setjmp.o signal.o sigcontext.o syscalls.o sysrq.o \ sys_call_table.o tls.o obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o -subarch-obj-y = lib/bitops.o kernel/semaphore.o +subarch-obj-y = lib/bitops.o lib/semaphore.o subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o subarch-obj-$(CONFIG_MODULES) += kernel/module.o diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c index 41b0ab2fe83..f1bcd399ac9 100644 --- a/arch/um/sys-i386/bugs.c +++ b/arch/um/sys-i386/bugs.c @@ -13,6 +13,7 @@ #include "sysdep/ptrace.h" #include "task.h" #include "os.h" +#include "user_util.h" #define MAXTOKEN 64 @@ -104,17 +105,17 @@ int cpu_feature(char *what, char *buf, int len) static int check_cpu_flag(char *feature, int *have_it) { char buf[MAXTOKEN], c; - int fd, len = sizeof(buf)/sizeof(buf[0]); + int fd, len = ARRAY_SIZE(buf); printk("Checking for host processor %s support...", feature); fd = os_open_file("/proc/cpuinfo", of_read(OPENFLAGS()), 0); if(fd < 0){ printk("Couldn't open /proc/cpuinfo, err = %d\n", -fd); - return(0); + return 0; } *have_it = 0; - if(!find_cpuinfo_line(fd, "flags", buf, sizeof(buf) / sizeof(buf[0]))) + if(!find_cpuinfo_line(fd, "flags", buf, ARRAY_SIZE(buf))) goto out; c = token(fd, buf, len - 1, ' '); @@ -138,7 +139,7 @@ static int check_cpu_flag(char *feature, int *have_it) if(*have_it == 0) printk("No\n"); else if(*have_it == 1) printk("Yes\n"); os_close_file(fd); - return(1); + return 1; } #if 0 /* This doesn't work in tt mode, plus it's causing compilation problems diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index fe0877b3509..69971b78bea 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -424,9 +424,8 @@ void ldt_get_host_info(void) size++; } - if(size < sizeof(dummy_list)/sizeof(dummy_list[0])) { + if(size < ARRAY_SIZE(dummy_list)) host_ldt_entries = dummy_list; - } else { size = (size + 1) * sizeof(dummy_list[0]); host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL); diff --git a/arch/um/sys-i386/ptrace_user.c b/arch/um/sys-i386/ptrace_user.c index 40aa8853144..5f3cc668582 100644 --- a/arch/um/sys-i386/ptrace_user.c +++ b/arch/um/sys-i386/ptrace_user.c @@ -15,6 +15,7 @@ #include "user.h" #include "os.h" #include "uml-config.h" +#include "user_util.h" int ptrace_getregs(long pid, unsigned long *regs_out) { @@ -51,7 +52,7 @@ static void write_debugregs(int pid, unsigned long *regs) int nregs, i; dummy = NULL; - nregs = sizeof(dummy->u_debugreg)/sizeof(dummy->u_debugreg[0]); + nregs = ARRAY_SIZE(dummy->u_debugreg); for(i = 0; i < nregs; i++){ if((i == 4) || (i == 5)) continue; if(ptrace(PTRACE_POKEUSR, pid, &dummy->u_debugreg[i], @@ -68,7 +69,7 @@ static void read_debugregs(int pid, unsigned long *regs) int nregs, i; dummy = NULL; - nregs = sizeof(dummy->u_debugreg)/sizeof(dummy->u_debugreg[0]); + nregs = ARRAY_SIZE(dummy->u_debugreg); for(i = 0; i < nregs; i++){ regs[i] = ptrace(PTRACE_PEEKUSR, pid, &dummy->u_debugreg[i], 0); diff --git a/arch/um/sys-i386/setjmp.S b/arch/um/sys-i386/setjmp.S new file mode 100644 index 00000000000..b766792c993 --- /dev/null +++ b/arch/um/sys-i386/setjmp.S @@ -0,0 +1,58 @@ +# +# arch/i386/setjmp.S +# +# setjmp/longjmp for the i386 architecture +# + +# +# The jmp_buf is assumed to contain the following, in order: +# %ebx +# %esp +# %ebp +# %esi +# %edi +# <return address> +# + + .text + .align 4 + .globl setjmp + .type setjmp, @function +setjmp: +#ifdef _REGPARM + movl %eax,%edx +#else + movl 4(%esp),%edx +#endif + popl %ecx # Return address, and adjust the stack + xorl %eax,%eax # Return value + movl %ebx,(%edx) + movl %esp,4(%edx) # Post-return %esp! + pushl %ecx # Make the call/return stack happy + movl %ebp,8(%edx) + movl %esi,12(%edx) + movl %edi,16(%edx) + movl %ecx,20(%edx) # Return address + ret + + .size setjmp,.-setjmp + + .text + .align 4 + .globl longjmp + .type longjmp, @function +longjmp: +#ifdef _REGPARM + xchgl %eax,%edx +#else + movl 4(%esp),%edx # jmp_ptr address + movl 8(%esp),%eax # Return value +#endif + movl (%edx),%ebx + movl 4(%edx),%esp + movl 8(%edx),%ebp + movl 12(%edx),%esi + movl 16(%edx),%edi + jmp *20(%edx) + + .size longjmp,.-longjmp diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index c19794d435d..f41768b8e25 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -5,8 +5,8 @@ # obj-y = bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \ - sigcontext.o signal.o syscalls.o syscall_table.o sysrq.o ksyms.o \ - tls.o + setjmp.o sigcontext.o signal.o syscalls.o syscall_table.o sysrq.o \ + ksyms.o tls.o obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o obj-$(CONFIG_MODULES) += um_module.o diff --git a/arch/um/sys-x86_64/setjmp.S b/arch/um/sys-x86_64/setjmp.S new file mode 100644 index 00000000000..45f547b4043 --- /dev/null +++ b/arch/um/sys-x86_64/setjmp.S @@ -0,0 +1,54 @@ +# +# arch/x86_64/setjmp.S +# +# setjmp/longjmp for the x86-64 architecture +# + +# +# The jmp_buf is assumed to contain the following, in order: +# %rbx +# %rsp (post-return) +# %rbp +# %r12 +# %r13 +# %r14 +# %r15 +# <return address> +# + + .text + .align 4 + .globl setjmp + .type setjmp, @function +setjmp: + pop %rsi # Return address, and adjust the stack + xorl %eax,%eax # Return value + movq %rbx,(%rdi) + movq %rsp,8(%rdi) # Post-return %rsp! + push %rsi # Make the call/return stack happy + movq %rbp,16(%rdi) + movq %r12,24(%rdi) + movq %r13,32(%rdi) + movq %r14,40(%rdi) + movq %r15,48(%rdi) + movq %rsi,56(%rdi) # Return address + ret + + .size setjmp,.-setjmp + + .text + .align 4 + .globl longjmp + .type longjmp, @function +longjmp: + movl %esi,%eax # Return value (int) + movq (%rdi),%rbx + movq 8(%rdi),%rsp + movq 16(%rdi),%rbp + movq 24(%rdi),%r12 + movq 32(%rdi),%r13 + movq 40(%rdi),%r14 + movq 48(%rdi),%r15 + jmp *56(%rdi) + + .size longjmp,.-longjmp diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 6cd4878625f..32ae1378f35 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -24,6 +24,10 @@ config X86 bool default y +config ZONE_DMA32 + bool + default y + config LOCKDEP_SUPPORT bool default y @@ -81,6 +85,9 @@ config ARCH_MAY_HAVE_PC_FDC bool default y +config ARCH_POPULATES_NODE_MAP + def_bool y + config DMI bool default y @@ -105,6 +112,7 @@ config X86_PC config X86_VSMP bool "Support for ScaleMP vSMP" + depends on PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -163,6 +171,7 @@ config X86_GOOD_APIC config MICROCODE tristate "/dev/cpu/microcode - Intel CPU microcode support" + select FW_LOADER ---help--- If you say Y here the 'File systems' section, you will be able to update the microcode on Intel processors. You will @@ -178,6 +187,11 @@ config MICROCODE If you use modprobe or kmod you may also want to add the line 'alias char-major-10-184 microcode' to your /etc/modules.conf file. +config MICROCODE_OLD_INTERFACE + bool + depends on MICROCODE + default y + config X86_MSR tristate "/dev/cpu/*/msr - Model-specific register support" help @@ -291,7 +305,7 @@ config NUMA config K8_NUMA bool "Old style AMD Opteron NUMA detection" - depends on NUMA + depends on NUMA && PCI default y help Enable K8 NUMA node topology detection. You should say Y here if @@ -421,7 +435,6 @@ config IOMMU config CALGARY_IOMMU bool "IBM Calgary IOMMU support" - default y select SWIOTLB depends on PCI && EXPERIMENTAL help @@ -468,8 +481,7 @@ config X86_MCE_AMD the DRAM Error Threshold. config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "kexec system call" help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -488,7 +500,14 @@ config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" depends on EXPERIMENTAL help - Generate crash dump after being started by kexec. + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or BIOS using + PHYSICAL_START. + For more details see Documentation/kdump/kdump.txt config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) @@ -526,6 +545,30 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR + bool "Enable -fstack-protector buffer overflow detection (EXPRIMENTAL)" + depends on EXPERIMENTAL + help + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of critical functions, a canary + value on the stack just before the return address, and validates + the value just before actually returning. Stack based buffer + overflows (that need to overwrite this return address) now also + overwrite the canary, which gets detected and the attack is then + neutralized via a kernel panic. + + This feature requires gcc version 4.2 or above, or a distribution + gcc with the feature backported. Older versions are automatically + detected and for those versions, this configuration option is ignored. + +config CC_STACKPROTECTOR_ALL + bool "Use stack-protector for all functions" + depends on CC_STACKPROTECTOR + help + Normally, GCC only inserts the canary value protection for + functions that use large-ish on-stack buffers. By enabling + this option, GCC will be asked to do this for ALL functions. + source kernel/Kconfig.hz config REORDER diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 431bb4bc36c..1c0f18d4f88 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -54,6 +54,16 @@ endif cflags-y += $(call cc-option,-funit-at-a-time) # prevent gcc from generating any FP code by mistake cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) +# do binutils support CFI? +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) + +# is .cfi_signal_frame supported too? +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) + +cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector ) +cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector-all ) CFLAGS += $(cflags-y) CFLAGS_KERNEL += $(cflags-kernel-y) diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile index f89d96f11a9..e70fa6e1da0 100644 --- a/arch/x86_64/boot/compressed/Makefile +++ b/arch/x86_64/boot/compressed/Makefile @@ -7,7 +7,8 @@ # targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional -m32 +EXTRA_AFLAGS := -traditional +AFLAGS := $(subst -m64,-m32,$(AFLAGS)) # cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with # -m32 diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index a50b631f4d2..c3bfd223ab4 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -526,12 +526,12 @@ is_disk1: movw %cs, %ax # aka SETUPSEG subw $DELTA_INITSEG, %ax # aka INITSEG movw %ax, %ds - movw $0, (0x1ff) # default is no pointing device + movb $0, (0x1ff) # default is no pointing device int $0x11 # int 0x11: equipment list testb $0x04, %al # check if mouse installed jz no_psmouse - movw $0xAA, (0x1ff) # device present + movb $0xAA, (0x1ff) # device present no_psmouse: #include "../../i386/boot/edd.S" diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 5fb97071594..647610ecb58 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc4 -# Thu Aug 24 21:05:55 2006 +# Linux kernel version: 2.6.18-git5 +# Tue Sep 26 09:30:47 2006 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y +CONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -38,16 +39,16 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -56,12 +57,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -160,6 +161,7 @@ CONFIG_X86_MCE_AMD=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y +# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set @@ -307,18 +309,23 @@ CONFIG_IP_PNP_DHCP=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_SUBTREES is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -345,7 +352,6 @@ CONFIG_IPV6=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -487,6 +493,7 @@ CONFIG_IDEDMA_AUTO=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y # CONFIG_SCSI_PROC_FS is not set # @@ -508,12 +515,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -532,29 +540,14 @@ CONFIG_AIC79XX_RESET_DELAY_MS=4000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=y CONFIG_MEGARAID_MAILBOX=y # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=y -CONFIG_SCSI_SATA=y -CONFIG_SCSI_SATA_AHCI=y -CONFIG_SCSI_SATA_SVW=y -CONFIG_SCSI_ATA_PIIX=y -# CONFIG_SCSI_SATA_MV is not set -CONFIG_SCSI_SATA_NV=y -# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -CONFIG_SCSI_SATA_SIL=y -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -CONFIG_SCSI_SATA_VIA=y -# CONFIG_SCSI_SATA_VITESSE is not set -CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -563,6 +556,7 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -573,6 +567,62 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SVW=y +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +CONFIG_SATA_NV=y +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +CONFIG_SATA_VIA=y +# CONFIG_SATA_VITESSE is not set +CONFIG_SATA_INTEL_COMBINED=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# # Multi-device support (RAID and LVM) # CONFIG_MD=y @@ -678,6 +728,7 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y CONFIG_FORCEDETH=y +# CONFIG_FORCEDETH_NAPI is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y @@ -714,6 +765,7 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y CONFIG_BNX2=y +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -1036,6 +1088,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OSS_OBSOLETE_DRIVER=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set @@ -1046,7 +1099,6 @@ CONFIG_SOUND_ICH=y # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_TVMIXER is not set # # USB support @@ -1203,7 +1255,6 @@ CONFIG_USB_MON=y # InfiniBand support # # CONFIG_INFINIBAND is not set -# CONFIG_IPATH_CORE is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1449,10 +1500,6 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c index 3bf58af9893..396d3c10001 100644 --- a/arch/x86_64/ia32/ia32_aout.c +++ b/arch/x86_64/ia32/ia32_aout.c @@ -333,7 +333,8 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) return error; } - error = bprm->file->f_op->read(bprm->file, (char *)text_addr, + error = bprm->file->f_op->read(bprm->file, + (char __user *)text_addr, ex.a_text+ex.a_data, &pos); if ((signed long)error < 0) { send_sig(SIGKILL, current, 0); @@ -366,7 +367,8 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) down_write(¤t->mm->mmap_sem); do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data); up_write(¤t->mm->mmap_sem); - bprm->file->f_op->read(bprm->file,(char *)N_TXTADDR(ex), + bprm->file->f_op->read(bprm->file, + (char __user *)N_TXTADDR(ex), ex.a_text+ex.a_data, &pos); flush_icache_range((unsigned long) N_TXTADDR(ex), (unsigned long) N_TXTADDR(ex) + @@ -477,7 +479,7 @@ static int load_aout_library(struct file *file) do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss); up_write(¤t->mm->mmap_sem); - file->f_op->read(file, (char *)start_addr, + file->f_op->read(file, (char __user *)start_addr, ex.a_text + ex.a_data, &pos); flush_icache_range((unsigned long) start_addr, (unsigned long) start_addr + ex.a_text + ex.a_data); diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index 25e5ca22204..a6ba9951e86 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -113,25 +113,19 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) } asmlinkage long -sys32_sigsuspend(int history0, int history1, old_sigset_t mask, - struct pt_regs *regs) +sys32_sigsuspend(int history0, int history1, old_sigset_t mask) { - sigset_t saveset; - mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; + current->saved_sigmask = current->blocked; siginitset(¤t->blocked, mask); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs->rax = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset)) - return -EINTR; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } asmlinkage long @@ -437,15 +431,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; - { - struct exec_domain *ed = current_thread_info()->exec_domain; - err |= __put_user((ed - && ed->signal_invmap - && sig < 32 - ? ed->signal_invmap[sig] - : sig), - &frame->sig); - } + err |= __put_user(sig, &frame->sig); if (err) goto give_sigsegv; @@ -492,6 +478,11 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, regs->rsp = (unsigned long) frame; regs->rip = (unsigned long) ka->sa.sa_handler; + /* Make -mregparm=3 work */ + regs->rax = sig; + regs->rdx = 0; + regs->rcx = 0; + asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); @@ -499,20 +490,20 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, regs->ss = __USER32_DS; set_fs(USER_DS); - regs->eflags &= ~TF_MASK; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); #if DEBUG_SIG printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return 1; + return 0; give_sigsegv: force_sigsegv(sig, current); - return 0; + return -EFAULT; } int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, @@ -595,18 +586,18 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->ss = __USER32_DS; set_fs(USER_DS); - regs->eflags &= ~TF_MASK; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); #if DEBUG_SIG printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return 1; + return 0; give_sigsegv: force_sigsegv(sig, current); - return 0; + return -EFAULT; } diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 5d4a7d125ed..b4aa875e175 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -71,6 +71,7 @@ */ ENTRY(ia32_sysenter_target) CFI_STARTPROC32 simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,0 CFI_REGISTER rsp,rbp swapgs @@ -186,6 +187,7 @@ ENDPROC(ia32_sysenter_target) */ ENTRY(ia32_cstar_target) CFI_STARTPROC32 simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ @@ -293,6 +295,7 @@ ia32_badarg: ENTRY(ia32_syscall) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-RIP /*CFI_REL_OFFSET ss,SS-RIP*/ CFI_REL_OFFSET rsp,RSP-RIP @@ -370,6 +373,7 @@ ENTRY(ia32_ptregs_common) popq %r11 CFI_ENDPROC CFI_STARTPROC32 simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-ARGOFFSET CFI_REL_OFFSET rax,RAX-ARGOFFSET CFI_REL_OFFSET rcx,RCX-ARGOFFSET @@ -703,8 +707,8 @@ ia32_sys_call_table: .quad sys_readlinkat /* 305 */ .quad sys_fchmodat .quad sys_faccessat - .quad quiet_ni_syscall /* pselect6 for now */ - .quad quiet_ni_syscall /* ppoll for now */ + .quad compat_sys_pselect6 + .quad compat_sys_ppoll .quad sys_unshare /* 310 */ .quad compat_sys_set_robust_list .quad compat_sys_get_robust_list @@ -713,4 +717,5 @@ ia32_sys_call_table: .quad sys_tee .quad compat_sys_vmsplice .quad compat_sys_move_pages + .quad sys_getcpu ia32_syscall_end: diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c index 659c0722f6b..d18198ed636 100644 --- a/arch/x86_64/ia32/ptrace32.c +++ b/arch/x86_64/ia32/ptrace32.c @@ -117,6 +117,10 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 val) if ((0x5454 >> ((val >> (16 + 4*i)) & 0xf)) & 1) return -EIO; child->thread.debugreg7 = val; + if (val) + set_tsk_thread_flag(child, TIF_DEBUG); + else + clear_tsk_thread_flag(child, TIF_DEBUG); break; default: @@ -371,8 +375,10 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) ret = -EIO; if (!access_ok(VERIFY_READ, u, sizeof(*u))) break; - /* no checking to be bug-to-bug compatible with i386 */ - __copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u)); + /* no checking to be bug-to-bug compatible with i386. */ + /* but silence warning */ + if (__copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u))) + ; set_stopped_child_used_math(child); child->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask; ret = 0; diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 9c130993380..f280d3665f4 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -60,6 +60,7 @@ #include <linux/highuid.h> #include <linux/vmalloc.h> #include <linux/fsnotify.h> +#include <linux/sysctl.h> #include <asm/mman.h> #include <asm/types.h> #include <asm/uaccess.h> @@ -389,7 +390,9 @@ sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, } } set_fs (KERNEL_DS); - ret = sys_rt_sigprocmask(how, set ? &s : NULL, oset ? &s : NULL, + ret = sys_rt_sigprocmask(how, + set ? (sigset_t __user *)&s : NULL, + oset ? (sigset_t __user *)&s : NULL, sigsetsize); set_fs (old_fs); if (ret) return ret; @@ -541,7 +544,7 @@ sys32_sysinfo(struct sysinfo32 __user *info) int bitcount = 0; set_fs (KERNEL_DS); - ret = sys_sysinfo(&s); + ret = sys_sysinfo((struct sysinfo __user *)&s); set_fs (old_fs); /* Check to see if any memory value is too large for 32-bit and scale @@ -589,7 +592,7 @@ sys32_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *int mm_segment_t old_fs = get_fs (); set_fs (KERNEL_DS); - ret = sys_sched_rr_get_interval(pid, &t); + ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t); set_fs (old_fs); if (put_compat_timespec(&t, interval)) return -EFAULT; @@ -605,7 +608,7 @@ sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize) mm_segment_t old_fs = get_fs(); set_fs (KERNEL_DS); - ret = sys_rt_sigpending(&s, sigsetsize); + ret = sys_rt_sigpending((sigset_t __user *)&s, sigsetsize); set_fs (old_fs); if (!ret) { switch (_NSIG_WORDS) { @@ -630,7 +633,7 @@ sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo) if (copy_siginfo_from_user32(&info, uinfo)) return -EFAULT; set_fs (KERNEL_DS); - ret = sys_rt_sigqueueinfo(pid, sig, &info); + ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info); set_fs (old_fs); return ret; } @@ -645,7 +648,7 @@ sys32_pause(void) } -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SYSCTL_SYSCALL struct sysctl_ia32 { unsigned int name; int nlen; @@ -666,9 +669,6 @@ sys32_sysctl(struct sysctl_ia32 __user *args32) size_t oldlen; int __user *namep; long ret; - extern int do_sysctl(int *name, int nlen, void *oldval, size_t *oldlenp, - void *newval, size_t newlen); - if (copy_from_user(&a32, args32, sizeof (a32))) return -EFAULT; @@ -692,7 +692,8 @@ sys32_sysctl(struct sysctl_ia32 __user *args32) set_fs(KERNEL_DS); lock_kernel(); - ret = do_sysctl(namep, a32.nlen, oldvalp, &oldlen, newvalp, (size_t) a32.newlen); + ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *)&oldlen, + newvalp, (size_t) a32.newlen); unlock_kernel(); set_fs(old_fs); @@ -743,7 +744,8 @@ sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) return -EFAULT; set_fs(KERNEL_DS); - ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count); + ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL, + count); set_fs(old_fs); if (offset && put_user(of, offset)) @@ -778,7 +780,7 @@ asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len, asmlinkage long sys32_olduname(struct oldold_utsname __user * name) { - int error; + int err; if (!name) return -EFAULT; @@ -787,27 +789,31 @@ asmlinkage long sys32_olduname(struct oldold_utsname __user * name) down_read(&uts_sem); - error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - __put_user(0,name->sysname+__OLD_UTS_LEN); - __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - __put_user(0,name->nodename+__OLD_UTS_LEN); - __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - __put_user(0,name->release+__OLD_UTS_LEN); - __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - __put_user(0,name->version+__OLD_UTS_LEN); + err = __copy_to_user(&name->sysname,&system_utsname.sysname, + __OLD_UTS_LEN); + err |= __put_user(0,name->sysname+__OLD_UTS_LEN); + err |= __copy_to_user(&name->nodename,&system_utsname.nodename, + __OLD_UTS_LEN); + err |= __put_user(0,name->nodename+__OLD_UTS_LEN); + err |= __copy_to_user(&name->release,&system_utsname.release, + __OLD_UTS_LEN); + err |= __put_user(0,name->release+__OLD_UTS_LEN); + err |= __copy_to_user(&name->version,&system_utsname.version, + __OLD_UTS_LEN); + err |= __put_user(0,name->version+__OLD_UTS_LEN); { char *arch = "x86_64"; if (personality(current->personality) == PER_LINUX32) arch = "i686"; - __copy_to_user(&name->machine,arch,strlen(arch)+1); + err |= __copy_to_user(&name->machine,arch,strlen(arch)+1); } up_read(&uts_sem); - error = error ? -EFAULT : 0; + err = err ? -EFAULT : 0; - return error; + return err; } long sys32_uname(struct old_utsname __user * name) @@ -831,7 +837,7 @@ long sys32_ustat(unsigned dev, struct ustat32 __user *u32p) seg = get_fs(); set_fs(KERNEL_DS); - ret = sys_ustat(dev,&u); + ret = sys_ustat(dev, (struct ustat __user *)&u); set_fs(seg); if (ret >= 0) { if (!access_ok(VERIFY_WRITE,u32p,sizeof(struct ustat32)) || diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index b5aaeafc1cd..3c7cbff04d3 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ pci-dma.o pci-nommu.o alternative.o obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-$(CONFIG_X86_MCE) += mce.o +obj-$(CONFIG_X86_MCE) += mce.o therm_throt.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ @@ -20,8 +20,8 @@ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o -obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o \ +obj-y += apic.o nmi.o +obj-y += io_apic.o mpparse.o \ genapic.o genapic_cluster.o genapic_flat.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o @@ -39,12 +39,14 @@ obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_AUDIT) += audit.o obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_PCI) += early-quirks.o obj-y += topology.o obj-y += intel_cacheinfo.o CFLAGS_vsyscall.o := $(PROFILING) -g0 +therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o bootflag-y += ../../i386/kernel/bootflag.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/kernel/topology.o @@ -54,4 +56,3 @@ quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o alternative-y += ../../i386/kernel/alternative.o - diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index 58af8e73738..b487396c4c5 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -17,6 +17,7 @@ #include <linux/pci_ids.h> #include <linux/pci.h> #include <linux/bitops.h> +#include <linux/ioport.h> #include <asm/e820.h> #include <asm/io.h> #include <asm/proto.h> @@ -33,6 +34,18 @@ int fallback_aper_force __initdata = 0; int fix_aperture __initdata = 1; +static struct resource gart_resource = { + .name = "GART", + .flags = IORESOURCE_MEM, +}; + +static void __init insert_aperture_resource(u32 aper_base, u32 aper_size) +{ + gart_resource.start = aper_base; + gart_resource.end = aper_base + aper_size - 1; + insert_resource(&iomem_resource, &gart_resource); +} + /* This code runs before the PCI subsystem is initialized, so just access the northbridge directly. */ @@ -48,7 +61,7 @@ static u32 __init allocate_aperture(void) /* * Aperture has to be naturally aligned. This means an 2GB aperture won't - * have much chances to find a place in the lower 4GB of memory. + * have much chance of finding a place in the lower 4GB of memory. * Unfortunately we cannot move it up because that would make the * IOMMU useless. */ @@ -62,6 +75,7 @@ static u32 __init allocate_aperture(void) } printk("Mapping aperture over %d KB of RAM @ %lx\n", aper_size >> 10, __pa(p)); + insert_aperture_resource((u32)__pa(p), aper_size); return (u32)__pa(p); } @@ -198,7 +212,7 @@ void __init iommu_hole_init(void) u64 aper_base, last_aper_base = 0; int valid_agp = 0; - if (iommu_aperture_disabled || !fix_aperture) + if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) return; printk("Checking aperture...\n"); @@ -233,8 +247,13 @@ void __init iommu_hole_init(void) last_aper_base = aper_base; } - if (!fix && !fallback_aper_force) + if (!fix && !fallback_aper_force) { + if (last_aper_base) { + unsigned long n = (32 * 1024 * 1024) << last_aper_order; + insert_aperture_resource((u32)last_aper_base, n); + } return; + } if (!fallback_aper_force) aper_alloc = search_agp_bridge(&aper_order, &valid_agp); diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 2b8cef037a6..135ff25e6b4 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -25,6 +25,7 @@ #include <linux/kernel_stat.h> #include <linux/sysdev.h> #include <linux/module.h> +#include <linux/ioport.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -36,13 +37,20 @@ #include <asm/idle.h> #include <asm/proto.h> #include <asm/timex.h> +#include <asm/apic.h> +int apic_mapped; int apic_verbosity; int apic_runs_main_timer; int apic_calibrate_pmtmr __initdata; int disable_apic_timer __initdata; +static struct resource lapic_resource = { + .name = "Local APIC", + .flags = IORESOURCE_MEM | IORESOURCE_BUSY, +}; + /* * cpu_mask that denotes the CPUs that needs timer interrupt coming in as * IPIs in place of local APIC timers @@ -136,72 +144,40 @@ void clear_local_APIC(void) apic_read(APIC_ESR); } -void __init connect_bsp_APIC(void) -{ - if (pic_mode) { - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - /* - * PIC mode, enable APIC mode in the IMCR, i.e. - * connect BSP's local APIC to INT and NMI lines. - */ - apic_printk(APIC_VERBOSE, "leaving PIC mode, enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); - } -} - void disconnect_bsp_APIC(int virt_wire_setup) { - if (pic_mode) { - /* - * Put the board back into PIC mode (has an effect - * only on certain older boards). Note that APIC - * interrupts, including IPIs, won't work beyond - * this point! The only exception are INIT IPIs. - */ - apic_printk(APIC_QUIET, "disabling APIC mode, entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); - } - else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } - else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + if (!virt_wire_setup) { + /* For LVT0 make it edge triggered, active high, external and enabled */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); } void disable_local_APIC(void) @@ -297,8 +273,6 @@ void __init sync_Arb_IDs(void) | APIC_DM_INIT); } -extern void __error_in_apic_c (void); - /* * An initial setup of the virtual wire mode. */ @@ -345,8 +319,7 @@ void __cpuinit setup_local_APIC (void) value = apic_read(APIC_LVR); - if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f) - __error_in_apic_c(); + BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f); /* * Double-check whether this APIC is really registered. @@ -399,32 +372,8 @@ void __cpuinit setup_local_APIC (void) */ value |= APIC_SPIV_APIC_ENABLED; - /* - * Some unknown Intel IO/APIC (or APIC) errata is biting us with - * certain networking cards. If high frequency interrupts are - * happening on a particular IOAPIC pin, plus the IOAPIC routing - * entry is masked/unmasked at a high rate as well then sooner or - * later IOAPIC line gets 'stuck', no more interrupts are received - * from the device. If focus CPU is disabled then the hang goes - * away, oh well :-( - * - * [ This bug can be reproduced easily with a level-triggered - * PCI Ne2000 networking cards and PII/PIII processors, dual - * BX chipset. ] - */ - /* - * Actually disabling the focus CPU check just makes the hang less - * frequent as it makes the interrupt distributon model be more - * like LRU than MRU (the short-term load is more even across CPUs). - * See also the comment in end_level_ioapic_irq(). --macro - */ -#if 1 - /* Enable focus processor (bit==0) */ - value &= ~APIC_SPIV_FOCUS_DISABLED; -#else - /* Disable focus processor (bit==1) */ - value |= APIC_SPIV_FOCUS_DISABLED; -#endif + /* We always use processor focus */ + /* * Set spurious IRQ vector */ @@ -442,7 +391,7 @@ void __cpuinit setup_local_APIC (void) * TODO: set up through-local-APIC from through-I/O-APIC? --macro */ value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && (pic_mode || !value)) { + if (!smp_processor_id() && !value) { value = APIC_DM_EXTINT; apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id()); } else { @@ -479,8 +428,7 @@ void __cpuinit setup_local_APIC (void) } nmi_watchdog_default(); - if (nmi_watchdog == NMI_LOCAL_APIC) - setup_apic_nmi_watchdog(); + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } @@ -527,8 +475,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); disable_local_APIC(); local_irq_restore(flags); return 0; @@ -606,18 +553,24 @@ static void apic_pm_activate(void) { } static int __init apic_set_verbosity(char *str) { + if (str == NULL) { + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; + } if (strcmp("debug", str) == 0) apic_verbosity = APIC_DEBUG; else if (strcmp("verbose", str) == 0) apic_verbosity = APIC_VERBOSE; - else + else { printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug", str); + " use apic=verbose or apic=debug\n", str); + return -EINVAL; + } - return 1; + return 0; } - -__setup("apic=", apic_set_verbosity); +early_param("apic", apic_set_verbosity); /* * Detect and enable local APICs on non-SMP boards. @@ -638,6 +591,40 @@ static int __init detect_init_APIC (void) return 0; } +#ifdef CONFIG_X86_IO_APIC +static struct resource * __init ioapic_setup_resources(void) +{ +#define IOAPIC_RESOURCE_NAME_SIZE 11 + unsigned long n; + struct resource *res; + char *mem; + int i; + + if (nr_ioapics <= 0) + return NULL; + + n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); + n *= nr_ioapics; + + res = alloc_bootmem(n); + + if (!res) + return NULL; + + memset(res, 0, n); + mem = (void *)&res[nr_ioapics]; + + for (i = 0; i < nr_ioapics; i++) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; + } + + return res; +} +#endif + void __init init_apic_mappings(void) { unsigned long apic_phys; @@ -654,19 +641,26 @@ void __init init_apic_mappings(void) apic_phys = mp_lapic_addr; set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_mapped = 1; apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys); + /* Put local APIC into the resource map. */ + lapic_resource.start = apic_phys; + lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; + insert_resource(&iomem_resource, &lapic_resource); + /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); -#ifdef CONFIG_X86_IO_APIC { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; int i; + struct resource *ioapic_res; + ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { ioapic_phys = mp_ioapics[i].mpc_apicaddr; @@ -678,9 +672,15 @@ void __init init_apic_mappings(void) apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n", __fix_to_virt(idx), ioapic_phys); idx++; + + if (ioapic_res) { + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + (4 * 1024) - 1; + insert_resource(&iomem_resource, ioapic_res); + ioapic_res++; + } } } -#endif } /* @@ -951,7 +951,7 @@ void smp_local_timer_interrupt(struct pt_regs *regs) * We take the 'long' return path, and there every subsystem * grabs the appropriate locks (kernel lock/ irq lock). * - * we might want to decouple profiling from the 'long path', + * We might want to decouple profiling from the 'long path', * and do the profiling totally in assembly. * * Currently this isn't too much of an issue (performance wise), @@ -1123,19 +1123,15 @@ int __init APIC_init_uniprocessor (void) verify_local_APIC(); - connect_bsp_APIC(); - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id)); setup_local_APIC(); -#ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); + setup_IO_APIC(); else nr_ioapics = 0; -#endif setup_boot_APIC_clock(); check_nmi_watchdog(); return 0; @@ -1144,14 +1140,17 @@ int __init APIC_init_uniprocessor (void) static __init int setup_disableapic(char *str) { disable_apic = 1; - return 1; -} + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; +} +early_param("disableapic", setup_disableapic); +/* same as disableapic, for compatibility */ static __init int setup_nolapic(char *str) { - disable_apic = 1; - return 1; + return setup_disableapic(str); } +early_param("nolapic", setup_nolapic); static __init int setup_noapictimer(char *str) { @@ -1184,11 +1183,5 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); -/* dummy parsing: see setup.c */ - -__setup("disableapic", setup_disableapic); -__setup("nolapic", setup_nolapic); /* same as disableapic, for compatibility */ - __setup("noapictimer", setup_noapictimer); -/* no "lapic" flag - we only use the lapic when the BIOS tells us so. */ diff --git a/arch/x86_64/kernel/crash.c b/arch/x86_64/kernel/crash.c index d8d5750d610..3525f884af8 100644 --- a/arch/x86_64/kernel/crash.c +++ b/arch/x86_64/kernel/crash.c @@ -23,6 +23,7 @@ #include <asm/nmi.h> #include <asm/hw_irq.h> #include <asm/mach_apic.h> +#include <asm/kdebug.h> /* This keeps a track of which one is crashing cpu. */ static int crashing_cpu; @@ -68,7 +69,7 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu) * for the data I pass, and I need tags * on the data to indicate what information I have * squirrelled away. ELF notes happen to provide - * all of that that no need to invent something new. + * all of that, no need to invent something new. */ buf = (u32*)per_cpu_ptr(crash_notes, cpu); @@ -95,15 +96,25 @@ static void crash_save_self(struct pt_regs *regs) #ifdef CONFIG_SMP static atomic_t waiting_for_crash_ipi; -static int crash_nmi_callback(struct pt_regs *regs, int cpu) +static int crash_nmi_callback(struct notifier_block *self, + unsigned long val, void *data) { + struct pt_regs *regs; + int cpu; + + if (val != DIE_NMI_IPI) + return NOTIFY_OK; + + regs = ((struct die_args *)data)->regs; + cpu = raw_smp_processor_id(); + /* * Don't do anything if this handler is invoked on crashing cpu. * Otherwise, system will completely hang. Crashing cpu can get * an NMI if system was initially booted with nmi_watchdog parameter. */ if (cpu == crashing_cpu) - return 1; + return NOTIFY_STOP; local_irq_disable(); crash_save_this_cpu(regs, cpu); @@ -127,12 +138,17 @@ static void smp_send_nmi_allbutself(void) * cpu hotplug shouldn't matter. */ +static struct notifier_block crash_nmi_nb = { + .notifier_call = crash_nmi_callback, +}; + static void nmi_shootdown_cpus(void) { unsigned long msecs; atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); - set_nmi_callback(crash_nmi_callback); + if (register_die_notifier(&crash_nmi_nb)) + return; /* return what? */ /* * Ensure the new callback function is set before sending @@ -178,9 +194,7 @@ void machine_crash_shutdown(struct pt_regs *regs) if(cpu_has_apic) disable_local_APIC(); -#if defined(CONFIG_X86_IO_APIC) disable_IO_APIC(); -#endif crash_save_self(regs); } diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index d6d7f731f6f..b3f0908668e 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -16,6 +16,7 @@ #include <linux/string.h> #include <linux/kexec.h> #include <linux/module.h> +#include <linux/mm.h> #include <asm/pgtable.h> #include <asm/page.h> @@ -24,6 +25,8 @@ #include <asm/bootsetup.h> #include <asm/sections.h> +struct e820map e820 __initdata; + /* * PFN of last memory page. */ @@ -40,7 +43,7 @@ unsigned long end_pfn_map; /* * Last pfn which the user wants to use. */ -unsigned long end_user_pfn = MAXMEM>>PAGE_SHIFT; +static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; extern struct resource code_resource, data_resource; @@ -69,12 +72,7 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) return 1; } #endif - /* kernel code + 640k memory hole (later should not be needed, but - be paranoid for now) */ - if (last >= 640*1024 && addr < 1024*1024) { - *addrp = 1024*1024; - return 1; - } + /* kernel code */ if (last >= __pa_symbol(&_text) && last < __pa_symbol(&_end)) { *addrp = __pa_symbol(&_end); return 1; @@ -164,59 +162,14 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsi return -1UL; } -/* - * Free bootmem based on the e820 table for a node. - */ -void __init e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long last, addr; - - if (ei->type != E820_RAM || - ei->addr+ei->size <= start || - ei->addr >= end) - continue; - - addr = round_up(ei->addr, PAGE_SIZE); - if (addr < start) - addr = start; - - last = round_down(ei->addr + ei->size, PAGE_SIZE); - if (last >= end) - last = end; - - if (last > addr && last-addr >= PAGE_SIZE) - free_bootmem_node(pgdat, addr, last-addr); - } -} - /* * Find the highest page frame number we have available */ unsigned long __init e820_end_of_ram(void) { - int i; unsigned long end_pfn = 0; + end_pfn = find_max_pfn_with_active_regions(); - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long start, end; - - start = round_up(ei->addr, PAGE_SIZE); - end = round_down(ei->addr + ei->size, PAGE_SIZE); - if (start >= end) - continue; - if (ei->type == E820_RAM) { - if (end > end_pfn<<PAGE_SHIFT) - end_pfn = end>>PAGE_SHIFT; - } else { - if (end > end_pfn_map<<PAGE_SHIFT) - end_pfn_map = end>>PAGE_SHIFT; - } - } - if (end_pfn > end_pfn_map) end_pfn_map = end_pfn; if (end_pfn_map > MAXMEM>>PAGE_SHIFT) @@ -226,43 +179,10 @@ unsigned long __init e820_end_of_ram(void) if (end_pfn > end_pfn_map) end_pfn = end_pfn_map; + printk("end_pfn_map = %lu\n", end_pfn_map); return end_pfn; } -/* - * Compute how much memory is missing in a range. - * Unlike the other functions in this file the arguments are in page numbers. - */ -unsigned long __init -e820_hole_size(unsigned long start_pfn, unsigned long end_pfn) -{ - unsigned long ram = 0; - unsigned long start = start_pfn << PAGE_SHIFT; - unsigned long end = end_pfn << PAGE_SHIFT; - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long last, addr; - - if (ei->type != E820_RAM || - ei->addr+ei->size <= start || - ei->addr >= end) - continue; - - addr = round_up(ei->addr, PAGE_SIZE); - if (addr < start) - addr = start; - - last = round_down(ei->addr + ei->size, PAGE_SIZE); - if (last >= end) - last = end; - - if (last > addr) - ram += last - addr; - } - return ((end - start) - ram) >> PAGE_SHIFT; -} - /* * Mark e820 reserved areas as busy for the resource manager. */ @@ -297,6 +217,96 @@ void __init e820_reserve_resources(void) } } +/* Mark pages corresponding to given address range as nosave */ +static void __init +e820_mark_nosave_range(unsigned long start, unsigned long end) +{ + unsigned long pfn, max_pfn; + + if (start >= end) + return; + + printk("Nosave address range: %016lx - %016lx\n", start, end); + max_pfn = end >> PAGE_SHIFT; + for (pfn = start >> PAGE_SHIFT; pfn < max_pfn; pfn++) + if (pfn_valid(pfn)) + SetPageNosave(pfn_to_page(pfn)); +} + +/* + * Find the ranges of physical addresses that do not correspond to + * e820 RAM areas and mark the corresponding pages as nosave for software + * suspend and suspend to RAM. + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(void) +{ + int i; + unsigned long paddr; + + paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (paddr < ei->addr) + e820_mark_nosave_range(paddr, + round_up(ei->addr, PAGE_SIZE)); + + paddr = round_down(ei->addr + ei->size, PAGE_SIZE); + if (ei->type != E820_RAM) + e820_mark_nosave_range(round_up(ei->addr, PAGE_SIZE), + paddr); + + if (paddr >= (end_pfn << PAGE_SHIFT)) + break; + } +} + +/* Walk the e820 map and register active regions within a node */ +void __init +e820_register_active_regions(int nid, unsigned long start_pfn, + unsigned long end_pfn) +{ + int i; + unsigned long ei_startpfn, ei_endpfn; + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT; + ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) + >> PAGE_SHIFT; + + /* Skip map entries smaller than a page */ + if (ei_startpfn > ei_endpfn) + continue; + + /* Check if end_pfn_map should be updated */ + if (ei->type != E820_RAM && ei_endpfn > end_pfn_map) + end_pfn_map = ei_endpfn; + + /* Skip if map is outside the node */ + if (ei->type != E820_RAM || + ei_endpfn <= start_pfn || + ei_startpfn >= end_pfn) + continue; + + /* Check for overlaps */ + if (ei_startpfn < start_pfn) + ei_startpfn = start_pfn; + if (ei_endpfn > end_pfn) + ei_endpfn = end_pfn; + + /* Obey end_user_pfn to save on memmap */ + if (ei_startpfn >= end_user_pfn) + continue; + if (ei_endpfn > end_user_pfn) + ei_endpfn = end_user_pfn; + + add_active_range(nid, ei_startpfn, ei_endpfn); + } +} + /* * Add a memory region to the kernel e820 map. */ @@ -517,13 +527,6 @@ static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) * If we're lucky and live on a modern system, the setup code * will have given us a memory map that we can use to properly * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) */ static int __init copy_e820_map(struct e820entry * biosmap, int nr_map) { @@ -541,34 +544,19 @@ static int __init copy_e820_map(struct e820entry * biosmap, int nr_map) if (start > end) return -1; - /* - * Some BIOSes claim RAM in the 640k - 1M region. - * Not right. Fix it up. - * - * This should be removed on Hammer which is supposed to not - * have non e820 covered ISA mappings there, but I had some strange - * problems so it stays for now. -AK - */ - if (type == E820_RAM) { - if (start < 0x100000ULL && end > 0xA0000ULL) { - if (start < 0xA0000ULL) - add_memory_region(start, 0xA0000ULL-start, type); - if (end <= 0x100000ULL) - continue; - start = 0x100000ULL; - size = end - start; - } - } - add_memory_region(start, size, type); } while (biosmap++,--nr_map); return 0; } -void __init setup_memory_region(void) +void early_panic(char *msg) { - char *who = "BIOS-e820"; + early_printk(msg); + panic(msg); +} +void __init setup_memory_region(void) +{ /* * Try to copy the BIOS-supplied E820-map. * @@ -576,51 +564,70 @@ void __init setup_memory_region(void) * the next section from 1mb->appropriate_mem_k */ sanitize_e820_map(E820_MAP, &E820_MAP_NR); - if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) { - unsigned long mem_size; - - /* compare results from other methods and take the greater */ - if (ALT_MEM_K < EXT_MEM_K) { - mem_size = EXT_MEM_K; - who = "BIOS-88"; - } else { - mem_size = ALT_MEM_K; - who = "BIOS-e801"; - } - - e820.nr_map = 0; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); - } + if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) + early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - e820_print_map(who); + e820_print_map("BIOS-e820"); } -void __init parse_memopt(char *p, char **from) -{ - end_user_pfn = memparse(p, from); +static int __init parse_memopt(char *p) +{ + if (!p) + return -EINVAL; + end_user_pfn = memparse(p, &p); end_user_pfn >>= PAGE_SHIFT; + return 0; } +early_param("mem", parse_memopt); + +static int userdef __initdata; -void __init parse_memmapopt(char *p, char **from) +static int __init parse_memmap_opt(char *p) { + char *oldp; unsigned long long start_at, mem_size; - mem_size = memparse(p, from); - p = *from; + if (!strcmp(p, "exactmap")) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. + */ + saved_max_pfn = e820_end_of_ram(); +#endif + end_pfn_map = 0; + e820.nr_map = 0; + userdef = 1; + return 0; + } + + oldp = p; + mem_size = memparse(p, &p); + if (p == oldp) + return -EINVAL; if (*p == '@') { - start_at = memparse(p+1, from); + start_at = memparse(p+1, &p); add_memory_region(start_at, mem_size, E820_RAM); } else if (*p == '#') { - start_at = memparse(p+1, from); + start_at = memparse(p+1, &p); add_memory_region(start_at, mem_size, E820_ACPI); } else if (*p == '$') { - start_at = memparse(p+1, from); + start_at = memparse(p+1, &p); add_memory_region(start_at, mem_size, E820_RESERVED); } else { end_user_pfn = (mem_size >> PAGE_SHIFT); } - p = *from; + return *p == '\0' ? 0 : -EINVAL; +} +early_param("memmap", parse_memmap_opt); + +void finish_e820_parsing(void) +{ + if (userdef) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + e820_print_map("user"); + } } unsigned long pci_mem_start = 0xaeedbabe; diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c new file mode 100644 index 00000000000..208e38a372c --- /dev/null +++ b/arch/x86_64/kernel/early-quirks.c @@ -0,0 +1,122 @@ +/* Various workarounds for chipset bugs. + This code runs very early and can't use the regular PCI subsystem + The entries are keyed to PCI bridges which usually identify chipsets + uniquely. + This is only for whole classes of chipsets with specific problems which + need early invasive action (e.g. before the timers are initialized). + Most PCI device specific workarounds can be done later and should be + in standard PCI quirks + Mainboard specific bugs should be handled by DMI entries. + CPU specific bugs in setup.c */ + +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/pci_ids.h> +#include <asm/pci-direct.h> +#include <asm/proto.h> +#include <asm/dma.h> + +static void via_bugs(void) +{ +#ifdef CONFIG_IOMMU + if ((end_pfn > MAX_DMA32_PFN || force_iommu) && + !iommu_aperture_allowed) { + printk(KERN_INFO + "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n"); + iommu_aperture_disabled = 1; + } +#endif +} + +#ifdef CONFIG_ACPI + +static int nvidia_hpet_detected __initdata; + +static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) +{ + nvidia_hpet_detected = 1; + return 0; +} +#endif + +static void nvidia_bugs(void) +{ +#ifdef CONFIG_ACPI + /* + * All timer overrides on Nvidia are + * wrong unless HPET is enabled. + */ + nvidia_hpet_detected = 0; + acpi_table_parse(ACPI_HPET, nvidia_hpet_check); + if (nvidia_hpet_detected == 0) { + acpi_skip_timer_override = 1; + printk(KERN_INFO "Nvidia board " + "detected. Ignoring ACPI " + "timer override.\n"); + } +#endif + /* RED-PEN skip them on mptables too? */ + +} + +static void ati_bugs(void) +{ +#if 1 /* for testing */ + printk("ATI board detected\n"); +#endif + /* No bugs right now */ +} + +struct chipset { + u16 vendor; + void (*f)(void); +}; + +static struct chipset early_qrk[] = { + { PCI_VENDOR_ID_NVIDIA, nvidia_bugs }, + { PCI_VENDOR_ID_VIA, via_bugs }, + { PCI_VENDOR_ID_ATI, ati_bugs }, + {} +}; + +void __init early_quirks(void) +{ + int num, slot, func; + + if (!early_pci_allowed()) + return; + + /* Poor man's PCI discovery */ + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + u32 class; + u32 vendor; + u8 type; + int i; + class = read_pci_config(num,slot,func, + PCI_CLASS_REVISION); + if (class == 0xffffffff) + break; + + if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) + continue; + + vendor = read_pci_config(num, slot, func, + PCI_VENDOR_ID); + vendor &= 0xffff; + + for (i = 0; early_qrk[i].f; i++) + if (early_qrk[i].vendor == vendor) { + early_qrk[i].f(); + return; + } + + type = read_pci_config_byte(num, slot, func, + PCI_HEADER_TYPE); + if (!(type & 0x80)) + break; + } + } + } +} diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 140051e07fa..e22ecd54870 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -215,20 +215,16 @@ void early_printk(const char *fmt, ...) static int __initdata keep_early; -int __init setup_early_printk(char *opt) +static int __init setup_early_printk(char *buf) { - char *space; - char buf[256]; + if (!buf) + return 0; if (early_console_initialized) - return 1; - - strlcpy(buf,opt,sizeof(buf)); - space = strchr(buf, ' '); - if (space) - *space = 0; + return 0; + early_console_initialized = 1; - if (strstr(buf,"keep")) + if (!strcmp(buf,"keep")) keep_early = 1; if (!strncmp(buf, "serial", 6)) { @@ -248,11 +244,12 @@ int __init setup_early_printk(char *opt) early_console = &simnow_console; keep_early = 1; } - early_console_initialized = 1; register_console(early_console); return 0; } +early_param("earlyprintk", setup_early_printk); + void __init disable_early_printk(void) { if (!early_console_initialized || !early_console) @@ -266,4 +263,3 @@ void __init disable_early_printk(void) } } -__setup("earlyprintk=", setup_early_printk); diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index aa8d8939abc..2802524104f 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -4,8 +4,6 @@ * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> - * - * $Id$ */ /* @@ -22,15 +20,25 @@ * at the top of the kernel process stack. * - partial stack frame: partially saved registers upto R11. * - full stack frame: Like partial stack frame, but all register saved. - * - * TODO: - * - schedule it carefully for the final hardware. + * + * Some macro usage: + * - CFI macros are used to generate dwarf2 unwind information for better + * backtraces. They don't change any code. + * - SAVE_ALL/RESTORE_ALL - Save/restore all registers + * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify. + * There are unfortunately lots of special cases where some registers + * not touched. The macro is a big mess that should be cleaned up. + * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS. + * Gives a full stack frame. + * - ENTRY/END Define functions in the symbol table. + * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack + * frame that is otherwise undefined after a SYSCALL + * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. + * - errorentry/paranoidentry/zeroentry - Define exception entry points. */ -#define ASSEMBLY 1 #include <linux/linkage.h> #include <asm/segment.h> -#include <asm/smp.h> #include <asm/cache.h> #include <asm/errno.h> #include <asm/dwarf2.h> @@ -115,6 +123,7 @@ .macro CFI_DEFAULT_STACK start=1 .if \start CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8 .else CFI_DEF_CFA_OFFSET SS+8 @@ -146,6 +155,10 @@ /* rdi: prev */ ENTRY(ret_from_fork) CFI_DEFAULT_STACK + push kernel_eflags(%rip) + CFI_ADJUST_CFA_OFFSET 4 + popf # reset kernel eflags + CFI_ADJUST_CFA_OFFSET -4 call schedule_tail GET_THREAD_INFO(%rcx) testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx) @@ -199,6 +212,7 @@ END(ret_from_fork) ENTRY(system_call) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ @@ -316,6 +330,7 @@ END(system_call) */ ENTRY(int_ret_from_sys_call) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-ARGOFFSET /*CFI_REL_OFFSET ss,SS-ARGOFFSET*/ CFI_REL_OFFSET rsp,RSP-ARGOFFSET @@ -476,6 +491,7 @@ END(stub_rt_sigreturn) */ .macro _frame ref CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-\ref /*CFI_REL_OFFSET ss,SS-\ref*/ CFI_REL_OFFSET rsp,RSP-\ref @@ -511,7 +527,12 @@ END(stub_rt_sigreturn) testl $3,CS(%rdi) je 1f swapgs -1: incl %gs:pda_irqcount # RED-PEN should check preempt count + /* irqcount is used to check if a CPU is already on an interrupt + stack or not. While this is essentially redundant with preempt_count + it is a little cheaper to use a separate counter in the PDA + (short of moving irq_enter into assembly, which would be too + much work) */ +1: incl %gs:pda_irqcount cmoveq %gs:pda_irqstackptr,%rsp push %rbp # backlink for old unwinder /* @@ -619,8 +640,7 @@ retint_signal: #ifdef CONFIG_PREEMPT /* Returning to kernel space. Check if we need preemption */ /* rcx: threadinfo. interrupts off. */ - .p2align -retint_kernel: +ENTRY(retint_kernel) cmpl $0,threadinfo_preempt_count(%rcx) jnz retint_restore_args bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx) @@ -679,7 +699,6 @@ ENTRY(call_function_interrupt) END(call_function_interrupt) #endif -#ifdef CONFIG_X86_LOCAL_APIC ENTRY(apic_timer_interrupt) apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt END(apic_timer_interrupt) @@ -691,7 +710,6 @@ END(error_interrupt) ENTRY(spurious_interrupt) apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt END(spurious_interrupt) -#endif /* * Exception entry points. @@ -768,7 +786,9 @@ paranoid_exit\trace: testl $3,CS(%rsp) jnz paranoid_userspace\trace paranoid_swapgs\trace: + .if \trace TRACE_IRQS_IRETQ 0 + .endif swapgs paranoid_restore\trace: RESTORE_ALL 8 @@ -814,7 +834,7 @@ paranoid_schedule\trace: * Exception entry point. This expects an error code/orig_rax on the stack * and the exception handler in %rax. */ -ENTRY(error_entry) +KPROBE_ENTRY(error_entry) _frame RDI /* rdi slot contains rax, oldrax contains error code */ cld @@ -898,7 +918,7 @@ error_kernelspace: cmpq $gs_change,RIP(%rsp) je error_swapgs jmp error_sti -END(error_entry) +KPROBE_END(error_entry) /* Reload gs selector with exception handling */ /* edi: new selector */ @@ -1020,8 +1040,7 @@ ENDPROC(execve) KPROBE_ENTRY(page_fault) errorentry do_page_fault -END(page_fault) - .previous .text +KPROBE_END(page_fault) ENTRY(coprocessor_error) zeroentry do_coprocessor_error @@ -1042,8 +1061,7 @@ KPROBE_ENTRY(debug) CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_debug, DEBUG_STACK paranoidexit -END(debug) - .previous .text +KPROBE_END(debug) /* runs on exception stack */ KPROBE_ENTRY(nmi) @@ -1057,8 +1075,7 @@ KPROBE_ENTRY(nmi) jmp paranoid_exit1 CFI_ENDPROC #endif -END(nmi) - .previous .text +KPROBE_END(nmi) KPROBE_ENTRY(int3) INTR_FRAME @@ -1067,8 +1084,7 @@ KPROBE_ENTRY(int3) paranoidentry do_int3, DEBUG_STACK jmp paranoid_exit1 CFI_ENDPROC -END(int3) - .previous .text +KPROBE_END(int3) ENTRY(overflow) zeroentry do_overflow @@ -1116,8 +1132,7 @@ END(stack_segment) KPROBE_ENTRY(general_protection) errorentry do_general_protection -END(general_protection) - .previous .text +KPROBE_END(general_protection) ENTRY(alignment_check) errorentry do_alignment_check diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c index 3020917546d..cdb90e671b8 100644 --- a/arch/x86_64/kernel/genapic_cluster.c +++ b/arch/x86_64/kernel/genapic_cluster.c @@ -118,7 +118,6 @@ struct genapic apic_cluster = { .name = "clustered", .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED, .target_cpus = cluster_target_cpus, .apic_id_registered = cluster_apic_id_registered, .init_apic_ldr = cluster_init_apic_ldr, diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c index eb86d374813..50ad153eaac 100644 --- a/arch/x86_64/kernel/genapic_flat.c +++ b/arch/x86_64/kernel/genapic_flat.c @@ -49,8 +49,7 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector) unsigned long cfg; unsigned long flags; - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); /* * Wait for idle. @@ -121,7 +120,6 @@ struct genapic apic_flat = { .name = "flat", .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), - .int_delivery_dest = APIC_DEST_LOGICAL | APIC_DM_LOWEST, .target_cpus = flat_target_cpus, .apic_id_registered = flat_apic_id_registered, .init_apic_ldr = flat_init_apic_ldr, @@ -180,7 +178,6 @@ struct genapic apic_physflat = { .name = "physical flat", .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED, .target_cpus = physflat_target_cpus, .apic_id_registered = flat_apic_id_registered, .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/ diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index c9739ca81d0..1e6f8087067 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -5,8 +5,6 @@ * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> - * - * $Id: head.S,v 1.49 2002/03/19 17:39:25 ak Exp $ */ @@ -187,12 +185,15 @@ startup_64: /* Finally jump to run C code and to be on real kernel address * Since we are running on identity-mapped space we have to jump - * to the full 64bit address , this is only possible as indirect - * jump + * to the full 64bit address, this is only possible as indirect + * jump. In addition we need to ensure %cs is set so we make this + * a far return. */ movq initial_code(%rip),%rax - pushq $0 # fake return address - jmp *%rax + pushq $0 # fake return address to stop unwinder + pushq $__KERNEL_CS # set correct cs + pushq %rax # target address in negative space + lretq /* SMP bootup changes these two */ .align 8 @@ -371,7 +372,7 @@ ENTRY(cpu_gdt_table) .quad 0,0 /* TSS */ .quad 0,0 /* LDT */ .quad 0,0,0 /* three TLS descriptors */ - .quad 0 /* unused */ + .quad 0x0000f40000000000 /* node/CPU stored in limit */ gdt_end: /* asm/segment.h:GDT_ENTRIES must match this */ /* This should be a multiple of the cache line size */ diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index 36647ce6aec..9561eb3c5b5 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -45,38 +45,16 @@ static void __init copy_bootdata(char *real_mode_data) new_data = *(int *) (x86_boot_params + NEW_CL_POINTER); if (!new_data) { if (OLD_CL_MAGIC != * (u16 *) OLD_CL_MAGIC_ADDR) { - printk("so old bootloader that it does not support commandline?!\n"); return; } new_data = OLD_CL_BASE_ADDR + * (u16 *) OLD_CL_OFFSET; - printk("old bootloader convention, maybe loadlin?\n"); } command_line = (char *) ((u64)(new_data)); memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); - printk("Bootdata ok (command line is %s)\n", saved_command_line); -} - -static void __init setup_boot_cpu_data(void) -{ - unsigned int dummy, eax; - - /* get vendor info */ - cpuid(0, (unsigned int *)&boot_cpu_data.cpuid_level, - (unsigned int *)&boot_cpu_data.x86_vendor_id[0], - (unsigned int *)&boot_cpu_data.x86_vendor_id[8], - (unsigned int *)&boot_cpu_data.x86_vendor_id[4]); - - /* get cpu type */ - cpuid(1, &eax, &dummy, &dummy, - (unsigned int *) &boot_cpu_data.x86_capability); - boot_cpu_data.x86 = (eax >> 8) & 0xf; - boot_cpu_data.x86_model = (eax >> 4) & 0xf; - boot_cpu_data.x86_mask = eax & 0xf; } void __init x86_64_start_kernel(char * real_mode_data) { - char *s; int i; for (i = 0; i < 256; i++) @@ -84,10 +62,7 @@ void __init x86_64_start_kernel(char * real_mode_data) asm volatile("lidt %0" :: "m" (idt_descr)); clear_bss(); - /* - * This must be called really, really early: - */ - lockdep_init(); + early_printk("Kernel alive\n"); /* * switch to init_level4_pgt from boot_level4_pgt @@ -103,22 +78,5 @@ void __init x86_64_start_kernel(char * real_mode_data) #ifdef CONFIG_SMP cpu_set(0, cpu_online_map); #endif - s = strstr(saved_command_line, "earlyprintk="); - if (s != NULL) - setup_early_printk(strchr(s, '=') + 1); -#ifdef CONFIG_NUMA - s = strstr(saved_command_line, "numa="); - if (s != NULL) - numa_setup(s+5); -#endif -#ifdef CONFIG_X86_IO_APIC - if (strstr(saved_command_line, "disableapic")) - disable_apic = 1; -#endif - /* You need early console to see that */ - if (__pa_symbol(&_end) >= KERNEL_TEXT_SIZE) - panic("Kernel too big for kernel mapping\n"); - - setup_boot_cpu_data(); start_kernel(); } diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index 0434b1f8e3d..2dd51f364ea 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -55,7 +55,6 @@ */ BUILD_16_IRQS(0x0) -#ifdef CONFIG_X86_LOCAL_APIC /* * The IO-APIC gives us many more interrupt sources. Most of these * are unused but an SMP system is supposed to have enough memory ... @@ -75,8 +74,6 @@ BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_15_IRQS(0xe) #endif -#endif - #undef BUILD_16_IRQS #undef BUILD_15_IRQS #undef BI @@ -100,7 +97,6 @@ BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) void (*interrupt[NR_IRQS])(void) = { IRQLIST_16(0x0), -#ifdef CONFIG_X86_IO_APIC IRQLIST_16(0x1), IRQLIST_16(0x2), IRQLIST_16(0x3), IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), @@ -110,7 +106,6 @@ void (*interrupt[NR_IRQS])(void) = { , IRQLIST_15(0xe) #endif -#endif }; #undef IRQ @@ -128,6 +123,8 @@ void (*interrupt[NR_IRQS])(void) = { DEFINE_SPINLOCK(i8259A_lock); +static int i8259A_auto_eoi; + static void end_8259A_irq (unsigned int irq) { if (irq > 256) { @@ -341,6 +338,8 @@ void init_8259A(int auto_eoi) { unsigned long flags; + i8259A_auto_eoi = auto_eoi; + spin_lock_irqsave(&i8259A_lock, flags); outb(0xff, 0x21); /* mask all of 8259A-1 */ @@ -399,7 +398,7 @@ static void save_ELCR(char *trigger) static int i8259A_resume(struct sys_device *dev) { - init_8259A(0); + init_8259A(i8259A_auto_eoi); restore_ELCR(irq_trigger); return 0; } @@ -453,9 +452,7 @@ void __init init_ISA_irqs (void) { int i; -#ifdef CONFIG_X86_LOCAL_APIC init_bsp_APIC(); -#endif init_8259A(0); for (i = 0; i < NR_IRQS; i++) { @@ -581,14 +578,12 @@ void __init init_IRQ(void) set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); -#ifdef CONFIG_X86_LOCAL_APIC /* self generated IPI for local APIC timer */ set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -#endif /* * Set the clock to HZ Hz, we already have a valid diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 924a4a33295..0491019d4c8 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -48,7 +48,7 @@ int sis_apic_bug; /* not actually supported, dummy for compile */ static int no_timer_check; -int disable_timer_pin_1 __initdata; +static int disable_timer_pin_1 __initdata; int timer_over_8254 __initdata = 0; @@ -111,6 +111,33 @@ int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; FINAL; \ } +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + return eu.entry; +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + union entry_union eu; + eu.entry = e; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + #ifdef CONFIG_SMP static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) { @@ -196,13 +223,9 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - unsigned long flags; /* Check delivery_mode to be sure we're not clearing an SMI pin */ - spin_lock_irqsave(&ioapic_lock, flags); - *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; /* @@ -210,10 +233,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) */ memset(&entry, 0, sizeof(entry)); entry.mask = 1; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0)); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry); } static void clear_IO_APIC (void) @@ -225,14 +245,6 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } -/* - * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to - * specific CPU-side IRQs. - */ - -#define MAX_PIRQS 8 -static int pirq_entries [MAX_PIRQS]; -static int pirqs_enabled; int skip_ioapic_setup; int ioapic_force; @@ -241,18 +253,17 @@ int ioapic_force; static int __init disable_ioapic_setup(char *str) { skip_ioapic_setup = 1; - return 1; + return 0; } +early_param("noapic", disable_ioapic_setup); -static int __init enable_ioapic_setup(char *str) +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) { - ioapic_force = 1; - skip_ioapic_setup = 0; + disable_timer_pin_1 = 1; return 1; } - -__setup("noapic", disable_ioapic_setup); -__setup("apic", enable_ioapic_setup); +__setup("disable_timer_pin_1", disable_timer_pin_setup); static int __init setup_disable_8254_timer(char *s) { @@ -268,135 +279,6 @@ static int __init setup_enable_8254_timer(char *s) __setup("disable_8254_timer", setup_disable_8254_timer); __setup("enable_8254_timer", setup_enable_8254_timer); -#include <asm/pci-direct.h> -#include <linux/pci_ids.h> -#include <linux/pci.h> - - -#ifdef CONFIG_ACPI - -static int nvidia_hpet_detected __initdata; - -static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) -{ - nvidia_hpet_detected = 1; - return 0; -} -#endif - -/* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC - off. Check for an Nvidia or VIA PCI bridge and turn it off. - Use pci direct infrastructure because this runs before the PCI subsystem. - - Can be overwritten with "apic" - - And another hack to disable the IOMMU on VIA chipsets. - - ... and others. Really should move this somewhere else. - - Kludge-O-Rama. */ -void __init check_ioapic(void) -{ - int num,slot,func; - /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { - u32 class; - u32 vendor; - u8 type; - class = read_pci_config(num,slot,func, - PCI_CLASS_REVISION); - if (class == 0xffffffff) - break; - - if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, - PCI_VENDOR_ID); - vendor &= 0xffff; - switch (vendor) { - case PCI_VENDOR_ID_VIA: -#ifdef CONFIG_IOMMU - if ((end_pfn > MAX_DMA32_PFN || - force_iommu) && - !iommu_aperture_allowed) { - printk(KERN_INFO - "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n"); - iommu_aperture_disabled = 1; - } -#endif - return; - case PCI_VENDOR_ID_NVIDIA: -#ifdef CONFIG_ACPI - /* - * All timer overrides on Nvidia are - * wrong unless HPET is enabled. - */ - nvidia_hpet_detected = 0; - acpi_table_parse(ACPI_HPET, - nvidia_hpet_check); - if (nvidia_hpet_detected == 0) { - acpi_skip_timer_override = 1; - printk(KERN_INFO "Nvidia board " - "detected. Ignoring ACPI " - "timer override.\n"); - } -#endif - /* RED-PEN skip them on mptables too? */ - return; - - /* This should be actually default, but - for 2.6.16 let's do it for ATI only where - it's really needed. */ - case PCI_VENDOR_ID_ATI: - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } - return; - } - - - /* No multi-function device? */ - type = read_pci_config_byte(num,slot,func, - PCI_HEADER_TYPE); - if (!(type & 0x80)) - break; - } - } - } -} - -static int __init ioapic_pirq_setup(char *str) -{ - int i, max; - int ints[MAX_PIRQS+1]; - - get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; - - pirqs_enabled = 1; - apic_printk(APIC_VERBOSE, "PIRQ redirection, working around broken MP-BIOS.\n"); - max = MAX_PIRQS; - if (ints[0] < MAX_PIRQS) - max = ints[0]; - - for (i = 0; i < max; i++) { - apic_printk(APIC_VERBOSE, "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); - /* - * PIRQs are mapped upside down, usually. - */ - pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; - } - return 1; -} - -__setup("pirq=", ioapic_pirq_setup); /* * Find the IRQ entry number of a certain pin. @@ -425,9 +307,7 @@ static int __init find_isa_irq_pin(int irq, int type) for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].mpc_srcbus; - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA) && + if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) @@ -443,9 +323,7 @@ static int __init find_isa_irq_apic(int irq, int type) for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].mpc_srcbus; - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA) && + if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) break; @@ -485,7 +363,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; - if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && + if (!test_bit(lbus, mp_bus_not_pci) && !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { @@ -508,27 +386,6 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return best_guess; } -/* - * EISA Edge/Level control register, ELCR - */ -static int EISA_ELCR(unsigned int irq) -{ - if (irq < 16) { - unsigned int port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; - } - apic_printk(APIC_VERBOSE, "Broken MPtable reports ISA irq %d\n", irq); - return 0; -} - -/* EISA interrupts are always polarity zero and can be edge or level - * trigger depending on the ELCR value. If an interrupt is listed as - * EISA conforming in the MP table, that means its trigger type must - * be read in from the ELCR */ - -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) -#define default_EISA_polarity(idx) (0) - /* ISA interrupts are always polarity zero edge triggered, * when listed as conforming in the MP table. */ @@ -541,12 +398,6 @@ static int EISA_ELCR(unsigned int irq) #define default_PCI_trigger(idx) (1) #define default_PCI_polarity(idx) (1) -/* MCA interrupts are always polarity zero level triggered, - * when listed as conforming in the MP table. */ - -#define default_MCA_trigger(idx) (1) -#define default_MCA_polarity(idx) (0) - static int __init MPBIOS_polarity(int idx) { int bus = mp_irqs[idx].mpc_srcbus; @@ -558,38 +409,11 @@ static int __init MPBIOS_polarity(int idx) switch (mp_irqs[idx].mpc_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ - { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - polarity = default_ISA_polarity(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - polarity = default_EISA_polarity(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - polarity = default_PCI_polarity(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - polarity = default_MCA_polarity(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } + if (test_bit(bus, mp_bus_not_pci)) + polarity = default_ISA_polarity(idx); + else + polarity = default_PCI_polarity(idx); break; - } case 1: /* high active */ { polarity = 0; @@ -627,38 +451,11 @@ static int MPBIOS_trigger(int idx) switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ - { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - trigger = default_ISA_trigger(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - trigger = default_PCI_trigger(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } + if (test_bit(bus, mp_bus_not_pci)) + trigger = default_ISA_trigger(idx); + else + trigger = default_PCI_trigger(idx); break; - } case 1: /* edge */ { trigger = 0; @@ -764,49 +561,17 @@ static int pin_2_irq(int idx, int apic, int pin) if (mp_irqs[idx].mpc_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - case MP_BUS_EISA: - case MP_BUS_MCA: - { - irq = mp_irqs[idx].mpc_srcbusirq; - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - irq = gsi_irq_sharing(irq); - break; - } - default: - { - printk(KERN_ERR "unknown bus type %d.\n",bus); - irq = 0; - break; - } - } - BUG_ON(irq >= NR_IRQS); - - /* - * PCI IRQ command line redirection. Yes, limits are hardcoded. - */ - if ((pin >= 16) && (pin <= 23)) { - if (pirq_entries[pin-16] != -1) { - if (!pirq_entries[pin-16]) { - apic_printk(APIC_VERBOSE, "disabling PIRQ%d\n", pin-16); - } else { - irq = pirq_entries[pin-16]; - apic_printk(APIC_VERBOSE, "using PIRQ%d -> IRQ %d\n", - pin-16, irq); - } - } + if (test_bit(bus, mp_bus_not_pci)) { + irq = mp_irqs[idx].mpc_srcbusirq; + } else { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; + irq = gsi_irq_sharing(irq); } BUG_ON(irq >= NR_IRQS); return irq; @@ -943,9 +708,9 @@ static void __init setup_IO_APIC_irqs(void) if (!apic && (irq < 16)) disable_8259A_irq(irq); } + ioapic_write_entry(apic, pin, entry); + spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -1083,10 +848,7 @@ void __apicdebuginit print_IO_APIC(void) for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2); - *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, i); printk(KERN_DEBUG " %02x %03X %02X ", i, @@ -1281,9 +1043,6 @@ static void __init enable_IO_APIC(void) irq_2_pin[i].pin = -1; irq_2_pin[i].next = 0; } - if (!pirqs_enabled) - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; /* * The number of IO-APIC IRQ registers (== #pins): @@ -1299,11 +1058,7 @@ static void __init enable_IO_APIC(void) /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { struct IO_APIC_route_entry entry; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - + entry = ioapic_read_entry(apic, pin); /* If the interrupt line is enabled and in ExtInt mode * I have found the pin where the i8259 is connected. @@ -1355,7 +1110,6 @@ void disable_IO_APIC(void) */ if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; - unsigned long flags; memset(&entry, 0, sizeof(entry)); entry.mask = 0; /* Enabled */ @@ -1372,84 +1126,13 @@ void disable_IO_APIC(void) /* * Add it to the IO-APIC irq-routing table: */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, - *(((int *)&entry)+1)); - io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, - *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); } disconnect_bsp_APIC(ioapic_i8259.pin != -1); } /* - * function to set the IO-APIC physical IDs based on the - * values stored in the MPC table. - * - * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 - */ - -static void __init setup_ioapic_ids_from_mpc (void) -{ - union IO_APIC_reg_00 reg_00; - int apic; - int i; - unsigned char old_id; - unsigned long flags; - - /* - * Set the IOAPIC ID to the value stored in the MPC table. - */ - for (apic = 0; apic < nr_ioapics; apic++) { - - /* Read the register 0 value */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - old_id = mp_ioapics[apic].mpc_apicid; - - - printk(KERN_INFO "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid); - - - /* - * We need to adjust the IRQ routing table - * if the ID changed. - */ - if (old_id != mp_ioapics[apic].mpc_apicid) - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; - - /* - * Read the right value from the MPC table and - * write it into the ID register. - */ - apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); - - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0, reg_00.raw); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* - * Sanity check - */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) - printk("could not set ID!\n"); - else - apic_printk(APIC_VERBOSE," ok.\n"); - } -} - -/* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: * @@ -1964,11 +1647,6 @@ void __init setup_IO_APIC(void) apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); - /* - * Set up the IO-APIC IRQ routing table. - */ - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); @@ -1987,17 +1665,12 @@ static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; - unsigned long flags; int i; data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - spin_lock_irqsave(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { - *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i); - *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i); - } - spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) + *entry = ioapic_read_entry(dev->id, i); return 0; } @@ -2019,11 +1692,9 @@ static int ioapic_resume(struct sys_device *dev) reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; io_apic_write(dev->id, 0, reg_00.raw); } - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { - io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1)); - io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0)); - } spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) + ioapic_write_entry(dev->id, i, entry[i]); return 0; } @@ -2077,19 +1748,6 @@ device_initcall(ioapic_init_sysfs); #define IO_APIC_MAX_ID 0xFE -int __init io_apic_get_version (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.version; -} - - int __init io_apic_get_redir_entries (int ioapic) { union IO_APIC_reg_01 reg_01; @@ -2148,10 +1806,10 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p if (!ioapic && (irq < 16)) disable_8259A_irq(irq); + ioapic_write_entry(ioapic, pin, entry); + spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); - set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c index b81614970ec..fe063d3cfe4 100644 --- a/arch/x86_64/kernel/ioport.c +++ b/arch/x86_64/kernel/ioport.c @@ -56,6 +56,7 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) memset(bitmap, 0xff, IO_BITMAP_BYTES); t->io_bitmap_ptr = bitmap; + set_thread_flag(TIF_IO_BITMAP); } /* diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 5221a53e90c..b3677e6ccc6 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -20,11 +20,6 @@ #include <asm/idle.h> atomic_t irq_err_count; -#ifdef CONFIG_X86_IO_APIC -#ifdef APIC_MISMATCH_DEBUG -atomic_t irq_mis_count; -#endif -#endif #ifdef CONFIG_DEBUG_STACKOVERFLOW /* @@ -92,18 +87,11 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count); seq_putc(p, '\n'); -#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "LOC: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs); seq_putc(p, '\n'); -#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); -#ifdef CONFIG_X86_IO_APIC -#ifdef APIC_MISMATCH_DEBUG - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); -#endif -#endif } return 0; } diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c index 106076b370f..0497e3bd5bf 100644 --- a/arch/x86_64/kernel/machine_kexec.c +++ b/arch/x86_64/kernel/machine_kexec.c @@ -15,6 +15,15 @@ #include <asm/mmu_context.h> #include <asm/io.h> +#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) +static u64 kexec_pgd[512] PAGE_ALIGNED; +static u64 kexec_pud0[512] PAGE_ALIGNED; +static u64 kexec_pmd0[512] PAGE_ALIGNED; +static u64 kexec_pte0[512] PAGE_ALIGNED; +static u64 kexec_pud1[512] PAGE_ALIGNED; +static u64 kexec_pmd1[512] PAGE_ALIGNED; +static u64 kexec_pte1[512] PAGE_ALIGNED; + static void init_level2_page(pmd_t *level2p, unsigned long addr) { unsigned long end_addr; @@ -144,32 +153,19 @@ static void load_segments(void) ); } -typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page, - unsigned long control_code_buffer, - unsigned long start_address, - unsigned long pgtable) ATTRIB_NORET; - -extern const unsigned char relocate_new_kernel[]; -extern const unsigned long relocate_new_kernel_size; - int machine_kexec_prepare(struct kimage *image) { - unsigned long start_pgtable, control_code_buffer; + unsigned long start_pgtable; int result; /* Calculate the offsets */ start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; - control_code_buffer = start_pgtable + PAGE_SIZE; /* Setup the identity mapped 64bit page table */ result = init_pgtable(image, start_pgtable); if (result) return result; - /* Place the code in the reboot code buffer */ - memcpy(__va(control_code_buffer), relocate_new_kernel, - relocate_new_kernel_size); - return 0; } @@ -184,28 +180,34 @@ void machine_kexec_cleanup(struct kimage *image) */ NORET_TYPE void machine_kexec(struct kimage *image) { - unsigned long page_list; - unsigned long control_code_buffer; - unsigned long start_pgtable; - relocate_new_kernel_t rnk; + unsigned long page_list[PAGES_NR]; + void *control_page; /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); - /* Calculate the offsets */ - page_list = image->head; - start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; - control_code_buffer = start_pgtable + PAGE_SIZE; - - /* Set the low half of the page table to my identity mapped - * page table for kexec. Leave the high half pointing at the - * kernel pages. Don't bother to flush the global pages - * as that will happen when I fully switch to my identity mapped - * page table anyway. - */ - memcpy(__va(read_cr3()), __va(start_pgtable), PAGE_SIZE/2); - __flush_tlb(); - + control_page = page_address(image->control_code_page) + PAGE_SIZE; + memcpy(control_page, relocate_kernel, PAGE_SIZE); + + page_list[PA_CONTROL_PAGE] = __pa(control_page); + page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[PA_PGD] = __pa(kexec_pgd); + page_list[VA_PGD] = (unsigned long)kexec_pgd; + page_list[PA_PUD_0] = __pa(kexec_pud0); + page_list[VA_PUD_0] = (unsigned long)kexec_pud0; + page_list[PA_PMD_0] = __pa(kexec_pmd0); + page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; + page_list[PA_PTE_0] = __pa(kexec_pte0); + page_list[VA_PTE_0] = (unsigned long)kexec_pte0; + page_list[PA_PUD_1] = __pa(kexec_pud1); + page_list[VA_PUD_1] = (unsigned long)kexec_pud1; + page_list[PA_PMD_1] = __pa(kexec_pmd1); + page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; + page_list[PA_PTE_1] = __pa(kexec_pte1); + page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + + page_list[PA_TABLE_PAGE] = + (unsigned long)__pa(page_address(image->control_code_page)); /* The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -222,7 +224,36 @@ NORET_TYPE void machine_kexec(struct kimage *image) */ set_gdt(phys_to_virt(0),0); set_idt(phys_to_virt(0),0); + /* now call it */ - rnk = (relocate_new_kernel_t) control_code_buffer; - (*rnk)(page_list, control_code_buffer, image->start, start_pgtable); + relocate_kernel((unsigned long)image->head, (unsigned long)page_list, + image->start); } + +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never set's it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init setup_crashkernel(char *arg) +{ + unsigned long size, base; + char *p; + if (!arg) + return -EINVAL; + size = memparse(arg, &p); + if (arg == p) + return -EINVAL; + if (*p == '@') { + base = memparse(p+1, &p); + /* FIXME: Do I want a sanity check to validate the + * memory range? Yes you do, but it's too early for + * e820 -AK */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; +} +early_param("crashkernel", setup_crashkernel); + diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 4e017fb30fb..bbea88801d8 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -182,7 +182,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) goto out2; memset(&m, 0, sizeof(struct mce)); - m.cpu = safe_smp_processor_id(); + m.cpu = smp_processor_id(); rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus); if (!(m.mcgstatus & MCG_STATUS_RIPV)) kill_it = 1; @@ -274,6 +274,33 @@ void do_machine_check(struct pt_regs * regs, long error_code) atomic_dec(&mce_entry); } +#ifdef CONFIG_X86_MCE_INTEL +/*** + * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog + * @cpu: The CPU on which the event occured. + * @status: Event status information + * + * This function should be called by the thermal interrupt after the + * event has been processed and the decision was made to log the event + * further. + * + * The status parameter will be saved to the 'status' field of 'struct mce' + * and historically has been the register value of the + * MSR_IA32_THERMAL_STATUS (Intel) msr. + */ +void mce_log_therm_throt_event(unsigned int cpu, __u64 status) +{ + struct mce m; + + memset(&m, 0, sizeof(m)); + m.cpu = cpu; + m.bank = MCE_THERMAL_BANK; + m.status = status; + rdtscll(m.tsc); + mce_log(&m); +} +#endif /* CONFIG_X86_MCE_INTEL */ + /* * Periodic polling timer for "silent" machine check errors. */ diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c index 8f533d2c40c..6551505d8a2 100644 --- a/arch/x86_64/kernel/mce_intel.c +++ b/arch/x86_64/kernel/mce_intel.c @@ -11,36 +11,21 @@ #include <asm/mce.h> #include <asm/hw_irq.h> #include <asm/idle.h> - -static DEFINE_PER_CPU(unsigned long, next_check); +#include <asm/therm_throt.h> asmlinkage void smp_thermal_interrupt(void) { - struct mce m; + __u64 msr_val; ack_APIC_irq(); exit_idle(); irq_enter(); - if (time_before(jiffies, __get_cpu_var(next_check))) - goto done; - - __get_cpu_var(next_check) = jiffies + HZ*300; - memset(&m, 0, sizeof(m)); - m.cpu = smp_processor_id(); - m.bank = MCE_THERMAL_BANK; - rdtscll(m.tsc); - rdmsrl(MSR_IA32_THERM_STATUS, m.status); - if (m.status & 0x1) { - printk(KERN_EMERG - "CPU%d: Temperature above threshold, cpu clock throttled\n", m.cpu); - add_taint(TAINT_MACHINE_CHECK); - } else { - printk(KERN_EMERG "CPU%d: Temperature/speed normal\n", m.cpu); - } - mce_log(&m); -done: + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + if (therm_throt_process(msr_val & 1)) + mce_log_therm_throt_event(smp_processor_id(), msr_val); + irq_exit(); } @@ -92,6 +77,9 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c) apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", cpu, tm2 ? "TM2" : "TM1"); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); return; } diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index a1ab4197f8a..20e88f4b564 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -41,8 +41,7 @@ int acpi_found_madt; * Various Linux-internal data structures created from the * MP-table. */ -unsigned char apic_version [MAX_APICS]; -unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; static int mp_current_pci_id = 0; @@ -56,7 +55,6 @@ struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; int mp_irq_entries; int nr_ioapics; -int pic_mode; unsigned long mp_lapic_addr = 0; @@ -71,19 +69,6 @@ unsigned disabled_cpus __initdata; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; -/* ACPI MADT entry parsing functions */ -#ifdef CONFIG_ACPI -extern struct acpi_boot_flags acpi_boot; -#ifdef CONFIG_X86_LOCAL_APIC -extern int acpi_parse_lapic (acpi_table_entry_header *header); -extern int acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header); -extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header); -#endif /*CONFIG_X86_LOCAL_APIC*/ -#ifdef CONFIG_X86_IO_APIC -extern int acpi_parse_ioapic (acpi_table_entry_header *header); -#endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI*/ - u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -108,24 +93,20 @@ static int __init mpf_checksum(unsigned char *mp, int len) static void __cpuinit MP_processor_info (struct mpc_config_processor *m) { int cpu; - unsigned char ver; cpumask_t tmp_map; + char *bootup_cpu = ""; if (!(m->mpc_cpuflag & CPU_ENABLED)) { disabled_cpus++; return; } - - printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n", - m->mpc_apicid, - (m->mpc_cpufeature & CPU_FAMILY_MASK)>>8, - (m->mpc_cpufeature & CPU_MODEL_MASK)>>4, - m->mpc_apicver); - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - Dprintk(" Bootup CPU\n"); + bootup_cpu = " (Bootup-CPU)"; boot_cpu_id = m->mpc_apicid; } + + printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); + if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); @@ -136,24 +117,7 @@ static void __cpuinit MP_processor_info (struct mpc_config_processor *m) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); -#if MAX_APICS < 255 - if ((int)m->mpc_apicid > MAX_APICS) { - printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", - m->mpc_apicid, MAX_APICS); - return; - } -#endif - ver = m->mpc_apicver; - physid_set(m->mpc_apicid, phys_cpu_present_map); - /* - * Validate version - */ - if (ver == 0x0) { - printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); - ver = 0x10; - } - apic_version[m->mpc_apicid] = ver; if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { /* * bios_cpu_apicid is required to have processors listed @@ -178,15 +142,11 @@ static void __init MP_bus_info (struct mpc_config_bus *m) Dprintk("Bus #%d is %s\n", m->mpc_busid, str); if (strncmp(str, "ISA", 3) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; - } else if (strncmp(str, "EISA", 4) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; + set_bit(m->mpc_busid, mp_bus_not_pci); } else if (strncmp(str, "PCI", 3) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; + clear_bit(m->mpc_busid, mp_bus_not_pci); mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; mp_current_pci_id++; - } else if (strncmp(str, "MCA", 3) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; } else { printk(KERN_ERR "Unknown bustype %s\n", str); } @@ -197,8 +157,8 @@ static void __init MP_ioapic_info (struct mpc_config_ioapic *m) if (!(m->mpc_flags & MPC_APIC_USABLE)) return; - printk("I/O APIC #%d Version %d at 0x%X.\n", - m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); + printk("I/O APIC #%d at 0x%X.\n", + m->mpc_apicid, m->mpc_apicaddr); if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "Max # of I/O APICs (%d) exceeded (found %d).\n", MAX_IO_APICS, nr_ioapics); @@ -232,19 +192,6 @@ static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); - /* - * Well it seems all SMP boards in existence - * use ExtINT/LVT1 == LINT0 and - * NMI/LVT2 == LINT1 - the following check - * will show us if this assumptions is false. - * Until then we do not have to add baggage. - */ - if ((m->mpc_irqtype == mp_ExtINT) && - (m->mpc_destapiclint != 0)) - BUG(); - if ((m->mpc_irqtype == mp_NMI) && - (m->mpc_destapiclint != 1)) - BUG(); } /* @@ -258,7 +205,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) unsigned char *mpt=((unsigned char *)mpc)+count; if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { - printk("SMP mptable: bad signature [%c%c%c%c]!\n", + printk("MPTABLE: bad signature [%c%c%c%c]!\n", mpc->mpc_signature[0], mpc->mpc_signature[1], mpc->mpc_signature[2], @@ -266,31 +213,31 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) return 0; } if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { - printk("SMP mptable: checksum error!\n"); + printk("MPTABLE: checksum error!\n"); return 0; } if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { - printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n", + printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", mpc->mpc_spec); return 0; } if (!mpc->mpc_lapic) { - printk(KERN_ERR "SMP mptable: null local APIC address!\n"); + printk(KERN_ERR "MPTABLE: null local APIC address!\n"); return 0; } memcpy(str,mpc->mpc_oem,8); - str[8]=0; - printk(KERN_INFO "OEM ID: %s ",str); + str[8] = 0; + printk(KERN_INFO "MPTABLE: OEM ID: %s ",str); memcpy(str,mpc->mpc_productid,12); - str[12]=0; - printk("Product ID: %s ",str); + str[12] = 0; + printk("MPTABLE: Product ID: %s ",str); - printk("APIC at: 0x%X\n",mpc->mpc_lapic); + printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic); /* save the local APIC address, it might be non-default */ if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; + mp_lapic_addr = mpc->mpc_lapic; /* * Now process the configuration blocks. @@ -302,7 +249,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) struct mpc_config_processor *m= (struct mpc_config_processor *)mpt; if (!acpi_lapic) - MP_processor_info(m); + MP_processor_info(m); mpt += sizeof(*m); count += sizeof(*m); break; @@ -321,8 +268,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) struct mpc_config_ioapic *m= (struct mpc_config_ioapic *)mpt; MP_ioapic_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); + mpt += sizeof(*m); + count += sizeof(*m); break; } case MP_INTSRC: @@ -331,8 +278,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) (struct mpc_config_intsrc *)mpt; MP_intsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); + mpt += sizeof(*m); + count += sizeof(*m); break; } case MP_LINTSRC: @@ -340,15 +287,15 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) struct mpc_config_lintsrc *m= (struct mpc_config_lintsrc *)mpt; MP_lintsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); + mpt += sizeof(*m); + count += sizeof(*m); break; } } } clustered_apic_check(); if (!num_processors) - printk(KERN_ERR "SMP mptable: no processors registered!\n"); + printk(KERN_ERR "MPTABLE: no processors registered!\n"); return num_processors; } @@ -444,13 +391,10 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) * 2 CPUs, numbered 0 & 1. */ processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_apicver = 0; processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | - boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; processor.mpc_reserved[0] = 0; processor.mpc_reserved[1] = 0; for (i = 0; i < 2; i++) { @@ -469,14 +413,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) case 5: memcpy(bus.mpc_bustype, "ISA ", 6); break; - case 2: - case 6: - case 3: - memcpy(bus.mpc_bustype, "EISA ", 6); - break; - case 4: - case 7: - memcpy(bus.mpc_bustype, "MCA ", 6); } MP_bus_info(&bus); if (mpc_default_type > 4) { @@ -487,7 +423,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) ioapic.mpc_type = MP_IOAPIC; ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.mpc_apicver = 0; ioapic.mpc_flags = MPC_APIC_USABLE; ioapic.mpc_apicaddr = 0xFEC00000; MP_ioapic_info(&ioapic); @@ -530,13 +466,6 @@ void __init get_smp_config (void) printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); - if (mpf->mpf_feature2 & (1<<7)) { - printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); - pic_mode = 1; - } else { - printk(KERN_INFO " Virtual Wire compatibility mode.\n"); - pic_mode = 0; - } /* * Now see if we need to read further. @@ -616,7 +545,7 @@ static int __init smp_scan_config (unsigned long base, unsigned long length) return 0; } -void __init find_intel_smp (void) +void __init find_smp_config(void) { unsigned int address; @@ -633,9 +562,7 @@ void __init find_intel_smp (void) smp_scan_config(0xF0000,0x10000)) return; /* - * If it is an SMP machine we should know now, unless the - * configuration is in an EISA/MCA bus machine with an - * extended bios data area. + * If it is an SMP machine we should know now. * * there is a real-mode segmented pointer pointing to the * 4K EBDA area at 0x40E, calculate and scan it here. @@ -656,69 +583,41 @@ void __init find_intel_smp (void) printk(KERN_INFO "No mptable found.\n"); } -/* - * - Intel MP Configuration Table - */ -void __init find_smp_config (void) -{ -#ifdef CONFIG_X86_LOCAL_APIC - find_intel_smp(); -#endif -} - - /* -------------------------------------------------------------------------- ACPI-based MP Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -void __init mp_register_lapic_address ( - u64 address) +void __init mp_register_lapic_address(u64 address) { mp_lapic_addr = (unsigned long) address; - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_id == -1U) boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); - - Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid); } - -void __cpuinit mp_register_lapic ( - u8 id, - u8 enabled) +void __cpuinit mp_register_lapic (u8 id, u8 enabled) { struct mpc_config_processor processor; int boot_cpu = 0; - if (id >= MAX_APICS) { - printk(KERN_WARNING "Processor #%d invalid (max %d)\n", - id, MAX_APICS); - return; - } - - if (id == boot_cpu_physical_apicid) + if (id == boot_cpu_id) boot_cpu = 1; processor.mpc_type = MP_PROCESSOR; processor.mpc_apicid = id; - processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR)); + processor.mpc_apicver = 0; processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; processor.mpc_reserved[0] = 0; processor.mpc_reserved[1] = 0; MP_processor_info(&processor); } -#ifdef CONFIG_X86_IO_APIC - #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -729,11 +628,9 @@ static struct mp_ioapic_routing { u32 pin_programmed[4]; } mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic ( - int gsi) +static int mp_find_ioapic(int gsi) { - int i = 0; + int i = 0; /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { @@ -743,17 +640,12 @@ static int mp_find_ioapic ( } printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; } - -void __init mp_register_ioapic ( - u8 id, - u32 address, - u32 gsi_base) +void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) { - int idx = 0; + int idx = 0; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -774,7 +666,7 @@ void __init mp_register_ioapic ( set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); mp_ioapics[idx].mpc_apicid = id; - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); + mp_ioapics[idx].mpc_apicver = 0; /* * Build basic IRQ lookup table to facilitate gsi->io_apic lookups @@ -785,21 +677,15 @@ void __init mp_register_ioapic ( mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapics[idx].mpc_apicaddr, mp_ioapic_routing[idx].gsi_start, mp_ioapic_routing[idx].gsi_end); - - return; } - -void __init mp_override_legacy_irq ( - u8 bus_irq, - u8 polarity, - u8 trigger, - u32 gsi) +void __init +mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { struct mpc_config_intsrc intsrc; int ioapic = -1; @@ -837,22 +723,18 @@ void __init mp_override_legacy_irq ( mp_irqs[mp_irq_entries] = intsrc; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!\n"); - - return; } - -void __init mp_config_acpi_legacy_irqs (void) +void __init mp_config_acpi_legacy_irqs(void) { struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; + int i = 0; + int ioapic = -1; /* * Fabricate the legacy ISA bus (bus #31). */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + set_bit(MP_ISA_BUS, mp_bus_not_pci); /* * Locate the IOAPIC that manages the ISA IRQs (0-15). @@ -905,24 +787,22 @@ void __init mp_config_acpi_legacy_irqs (void) if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!\n"); } - - return; } #define MAX_GSI_NUM 4096 int mp_register_gsi(u32 gsi, int triggering, int polarity) { - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - static int pci_irq = 16; + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; + static int pci_irq = 16; /* * Mapping between Global System Interrupts, which * represent all possible interrupts, to the IRQs * assigned to actual devices. */ - static int gsi_to_irq[MAX_GSI_NUM]; + static int gsi_to_irq[MAX_GSI_NUM]; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; @@ -996,6 +876,4 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) polarity == ACPI_ACTIVE_HIGH ? 0 : 1); return gsi; } - -#endif /*CONFIG_X86_IO_APIC*/ #endif /*CONFIG_ACPI*/ diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 5baa0c726e9..4d6fb047952 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -28,71 +28,138 @@ #include <asm/mce.h> #include <asm/intel_arch_perfmon.h> -/* - * lapic_nmi_owner tracks the ownership of the lapic NMI hardware: - * - it may be reserved by some other driver, or not - * - when not reserved by some other driver, it may be used for - * the NMI watchdog, or not - * - * This is maintained separately from nmi_active because the NMI - * watchdog may also be driven from the I/O APIC timer. +/* perfctr_nmi_owner tracks the ownership of the perfctr registers: + * evtsel_nmi_owner tracks the ownership of the event selection + * - different performance counters/ event selection may be reserved for + * different subsystems this reservation system just tries to coordinate + * things a little */ -static DEFINE_SPINLOCK(lapic_nmi_owner_lock); -static unsigned int lapic_nmi_owner; -#define LAPIC_NMI_WATCHDOG (1<<0) -#define LAPIC_NMI_RESERVED (1<<1) +static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner); +static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]); + +/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's + * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) + */ +#define NMI_MAX_COUNTER_BITS 66 /* nmi_active: - * +1: the lapic NMI watchdog is active, but can be disabled - * 0: the lapic NMI watchdog has not been set up, and cannot + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot * be enabled - * -1: the lapic NMI watchdog is disabled, but can be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled */ -int nmi_active; /* oprofile uses this */ +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; -static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ -static unsigned int nmi_p4_cccr_val; -/* Note that these events don't tick when the CPU idles. This means - the frequency varies with CPU load. */ +struct nmi_watchdog_ctlblk { + int enabled; + u64 check_bit; + unsigned int cccr_msr; + unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ + unsigned int evntsel_msr; /* the MSR to select the events to handle */ +}; +static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); -#define K7_EVNTSEL_ENABLE (1 << 22) -#define K7_EVNTSEL_INT (1 << 20) -#define K7_EVNTSEL_OS (1 << 17) -#define K7_EVNTSEL_USR (1 << 16) -#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 -#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING +/* local prototypes */ +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); -#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL -#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the performance counter register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_PERFCTR0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_PERFCTR0); + else + return (msr - MSR_P4_BPU_PERFCTR0); + } + return 0; +} -#define MSR_P4_MISC_ENABLE 0x1A0 -#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) -#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12) -#define MSR_P4_PERFCTR0 0x300 -#define MSR_P4_CCCR0 0x360 -#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) -#define P4_ESCR_OS (1<<3) -#define P4_ESCR_USR (1<<2) -#define P4_CCCR_OVF_PMI0 (1<<26) -#define P4_CCCR_OVF_PMI1 (1<<27) -#define P4_CCCR_THRESHOLD(N) ((N)<<20) -#define P4_CCCR_COMPLEMENT (1<<19) -#define P4_CCCR_COMPARE (1<<18) -#define P4_CCCR_REQUIRED (3<<16) -#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) -#define P4_CCCR_ENABLE (1<<12) -/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter - CRU_ESCR0 (with any non-null event selector) through a complemented - max threshold. [IA32-Vol3, Section 14.9.9] */ -#define MSR_P4_IQ_COUNTER0 0x30C -#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR) -#define P4_NMI_IQ_CCCR0 \ - (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ - P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the event selection register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_EVNTSEL0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_EVENTSEL0); + else + return (msr - MSR_P4_BSU_ESCR0); + } + return 0; +} + +/* checks for a bit availability (hack for oprofile) */ +int avail_to_resrv_perfctr_nmi_bit(unsigned int counter) +{ + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); +} + +/* checks the an msr for availability */ +int avail_to_resrv_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); +} + +int reserve_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner))) + return 1; + return 0; +} + +void release_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner)); +} + +int reserve_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner))) + return 1; + return 0; +} + +void release_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)); +} static __cpuinit inline int nmi_known_cpu(void) { @@ -109,7 +176,7 @@ static __cpuinit inline int nmi_known_cpu(void) } /* Run after command line and cpu_init init, but before all other checks */ -void __cpuinit nmi_watchdog_default(void) +void nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; @@ -145,6 +212,12 @@ int __init check_nmi_watchdog (void) int *counts; int cpu; + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) + return 0; + + if (!atomic_read(&nmi_active)) + return 0; + counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!counts) return -1; @@ -162,26 +235,43 @@ int __init check_nmi_watchdog (void) mdelay((10*1000)/nmi_hz); // wait 10 ticks for_each_online_cpu(cpu) { + if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled) + continue; if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { - endflag = 1; printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", cpu, counts[cpu], cpu_pda(cpu)->__nmi_count); - nmi_active = 0; - lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; - nmi_perfctr_msr = 0; - kfree(counts); - return -1; + per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0; + atomic_dec(&nmi_active); } } + if (!atomic_read(&nmi_active)) { + kfree(counts); + atomic_set(&nmi_active, -1); + return -1; + } endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) + if (nmi_watchdog == NMI_LOCAL_APIC) { + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + nmi_hz = 1; + /* + * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && + ((u64)cpu_khz * 1000) > 0x7fffffffULL) { + nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; + } + } kfree(counts); return 0; @@ -201,91 +291,65 @@ int __init setup_nmi_watchdog(char *str) get_option(&str, &nmi); - if (nmi >= NMI_INVALID) + if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) return 0; + + if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0)) + return 0; /* no lapic support */ nmi_watchdog = nmi; return 1; } __setup("nmi_watchdog=", setup_nmi_watchdog); -static void disable_intel_arch_watchdog(void); - static void disable_lapic_nmi_watchdog(void) { - if (nmi_active <= 0) + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); + + if (atomic_read(&nmi_active) <= 0) return; - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - wrmsr(MSR_K7_EVNTSEL0, 0, 0); - break; - case X86_VENDOR_INTEL: - if (boot_cpu_data.x86 == 15) { - wrmsr(MSR_P4_IQ_CCCR0, 0, 0); - wrmsr(MSR_P4_CRU_ESCR0, 0, 0); - } else if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - disable_intel_arch_watchdog(); - } - break; - } - nmi_active = -1; - /* tell do_nmi() and others that we're not active any more */ - nmi_watchdog = 0; -} -static void enable_lapic_nmi_watchdog(void) -{ - if (nmi_active < 0) { - nmi_watchdog = NMI_LOCAL_APIC; - touch_nmi_watchdog(); - setup_apic_nmi_watchdog(); - } + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); + + BUG_ON(atomic_read(&nmi_active) != 0); } -int reserve_lapic_nmi(void) +static void enable_lapic_nmi_watchdog(void) { - unsigned int old_owner; + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); - spin_lock(&lapic_nmi_owner_lock); - old_owner = lapic_nmi_owner; - lapic_nmi_owner |= LAPIC_NMI_RESERVED; - spin_unlock(&lapic_nmi_owner_lock); - if (old_owner & LAPIC_NMI_RESERVED) - return -EBUSY; - if (old_owner & LAPIC_NMI_WATCHDOG) - disable_lapic_nmi_watchdog(); - return 0; -} + /* are we already enabled */ + if (atomic_read(&nmi_active) != 0) + return; -void release_lapic_nmi(void) -{ - unsigned int new_owner; + /* are we lapic aware */ + if (nmi_known_cpu() <= 0) + return; - spin_lock(&lapic_nmi_owner_lock); - new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED; - lapic_nmi_owner = new_owner; - spin_unlock(&lapic_nmi_owner_lock); - if (new_owner & LAPIC_NMI_WATCHDOG) - enable_lapic_nmi_watchdog(); + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); + touch_nmi_watchdog(); } void disable_timer_nmi_watchdog(void) { - if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0)) + BUG_ON(nmi_watchdog != NMI_IO_APIC); + + if (atomic_read(&nmi_active) <= 0) return; disable_irq(0); - unset_nmi_callback(); - nmi_active = -1; - nmi_watchdog = NMI_NONE; + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); + + BUG_ON(atomic_read(&nmi_active) != 0); } void enable_timer_nmi_watchdog(void) { - if (nmi_active < 0) { - nmi_watchdog = NMI_IO_APIC; + BUG_ON(nmi_watchdog != NMI_IO_APIC); + + if (atomic_read(&nmi_active) == 0) { touch_nmi_watchdog(); - nmi_active = 1; + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); enable_irq(0); } } @@ -296,15 +360,20 @@ static int nmi_pm_active; /* nmi_active before suspend */ static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) { - nmi_pm_active = nmi_active; - disable_lapic_nmi_watchdog(); + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); return 0; } static int lapic_nmi_resume(struct sys_device *dev) { - if (nmi_pm_active > 0) - enable_lapic_nmi_watchdog(); + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } return 0; } @@ -323,7 +392,13 @@ static int __init init_lapic_nmi_sysfs(void) { int error; - if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC) + /* should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if ( atomic_read(&nmi_active) < 0 ) return 0; error = sysdev_class_register(&nmi_sysclass); @@ -341,74 +416,209 @@ late_initcall(init_lapic_nmi_sysfs); * Original code written by Keith Owens. */ -static void clear_msr_range(unsigned int base, unsigned int n) -{ - unsigned int i; +/* Note that these events don't tick when the CPU idles. This means + the frequency varies with CPU load. */ - for(i = 0; i < n; ++i) - wrmsr(base+i, 0, 0); -} +#define K7_EVNTSEL_ENABLE (1 << 22) +#define K7_EVNTSEL_INT (1 << 20) +#define K7_EVNTSEL_OS (1 << 17) +#define K7_EVNTSEL_USR (1 << 16) +#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 +#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING -static void setup_k7_watchdog(void) +static int setup_k7_watchdog(void) { - int i; + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - nmi_perfctr_msr = MSR_K7_PERFCTR0; + perfctr_msr = MSR_K7_PERFCTR0; + evntsel_msr = MSR_K7_EVNTSEL0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - for(i = 0; i < 4; ++i) { - /* Simulator may not support it */ - if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) { - nmi_perfctr_msr = 0; - return; - } - wrmsrl(MSR_K7_PERFCTR0+i, 0UL); - } + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + /* Simulator may not support it */ + if (checking_wrmsrl(evntsel_msr, 0UL)) + goto fail2; + wrmsrl(perfctr_msr, 0UL); evntsel = K7_EVNTSEL_INT | K7_EVNTSEL_OS | K7_EVNTSEL_USR | K7_NMI_EVENT; - wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz)); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; - wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL<<63; + return 1; +fail2: + release_evntsel_nmi(evntsel_msr); +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; } -static void disable_intel_arch_watchdog(void) +static void stop_k7_watchdog(void) { - unsigned ebx; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - /* - * Check whether the Architectural PerfMon supports - * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebp indicates event present. + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); +} + +/* Note that these events don't tick when the CPU idles. This means + the frequency varies with CPU load. */ + +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) +#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) +#define P4_ESCR_OS (1<<3) +#define P4_ESCR_USR (1<<2) +#define P4_CCCR_OVF_PMI0 (1<<26) +#define P4_CCCR_OVF_PMI1 (1<<27) +#define P4_CCCR_THRESHOLD(N) ((N)<<20) +#define P4_CCCR_COMPLEMENT (1<<19) +#define P4_CCCR_COMPARE (1<<18) +#define P4_CCCR_REQUIRED (3<<16) +#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) +#define P4_CCCR_ENABLE (1<<12) +#define P4_CCCR_OVF (1<<31) +/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + CRU_ESCR0 (with any non-null event selector) through a complemented + max threshold. [IA32-Vol3, Section 14.9.9] */ + +static int setup_p4_watchdog(void) +{ + unsigned int perfctr_msr, evntsel_msr, cccr_msr; + unsigned int evntsel, cccr_val; + unsigned int misc_enable, dummy; + unsigned int ht_num; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); + if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) + return 0; + +#ifdef CONFIG_SMP + /* detect which hyperthread we are on */ + if (smp_num_siblings == 2) { + unsigned int ebx, apicid; + + ebx = cpuid_ebx(1); + apicid = (ebx >> 24) & 0xff; + ht_num = apicid & 1; + } else +#endif + ht_num = 0; + + /* performance counters are shared resources + * assign each hyperthread its own set + * (re-use the ESCR0 register, seems safe + * and keeps the cccr_val the same) */ - ebx = cpuid_ebx(10); - if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0); + if (!ht_num) { + /* logical cpu 0 */ + perfctr_msr = MSR_P4_IQ_PERFCTR0; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR0; + cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); + } else { + /* logical cpu 1 */ + perfctr_msr = MSR_P4_IQ_PERFCTR1; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR1; + cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); + } + + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; + + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + evntsel = P4_ESCR_EVENT_SELECT(0x3F) + | P4_ESCR_OS + | P4_ESCR_USR; + + cccr_val |= P4_CCCR_THRESHOLD(15) + | P4_CCCR_COMPLEMENT + | P4_CCCR_COMPARE + | P4_CCCR_REQUIRED; + + wrmsr(evntsel_msr, evntsel, 0); + wrmsr(cccr_msr, cccr_val, 0); + wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + apic_write(APIC_LVTPC, APIC_DM_NMI); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = cccr_msr; + wd->check_bit = 1ULL<<39; + return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; +} + +static void stop_p4_watchdog(void) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + wrmsr(wd->cccr_msr, 0, 0); + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } +#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL +#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK + static int setup_intel_arch_watchdog(void) { + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; - unsigned ebx; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); /* * Check whether the Architectural PerfMon supports * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebp indicates event present. + * NOTE: Corresponding bit = 0 in ebx indicates event present. */ - ebx = cpuid_ebx(10); - if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - return 0; + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + goto fail; + + perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0; - nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2); - clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2); + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + wrmsrl(perfctr_msr, 0UL); evntsel = ARCH_PERFMON_EVENTSEL_INT | ARCH_PERFMON_EVENTSEL_OS @@ -416,84 +626,122 @@ static int setup_intel_arch_watchdog(void) | ARCH_PERFMON_NMI_EVENT_SEL | ARCH_PERFMON_NMI_EVENT_UMASK; - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); - wrmsrl(MSR_ARCH_PERFMON_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz)); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL << (eax.split.bit_width - 1); return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; } - -static int setup_p4_watchdog(void) +static void stop_intel_arch_watchdog(void) { - unsigned int misc_enable, dummy; + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy); - if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) - return 0; + /* + * Check whether the Architectural PerfMon supports + * Unhalted Core Cycles Event or not. + * NOTE: Corresponding bit = 0 in ebx indicates event present. + */ + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + return; - nmi_perfctr_msr = MSR_P4_IQ_COUNTER0; - nmi_p4_cccr_val = P4_NMI_IQ_CCCR0; -#ifdef CONFIG_SMP - if (smp_num_siblings == 2) - nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1; -#endif + wrmsr(wd->evntsel_msr, 0, 0); - if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL)) - clear_msr_range(0x3F1, 2); - /* MSR 0x3F0 seems to have a default value of 0xFC00, but current - docs doesn't fully define it, so leave it alone for now. */ - if (boot_cpu_data.x86_model >= 0x3) { - /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */ - clear_msr_range(0x3A0, 26); - clear_msr_range(0x3BC, 3); - } else { - clear_msr_range(0x3A0, 31); - } - clear_msr_range(0x3C0, 6); - clear_msr_range(0x3C8, 6); - clear_msr_range(0x3E0, 2); - clear_msr_range(MSR_P4_CCCR0, 18); - clear_msr_range(MSR_P4_PERFCTR0, 18); - - wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); - wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); - Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz * 1000UL / nmi_hz)); - wrmsrl(MSR_P4_IQ_COUNTER0, -((u64)cpu_khz * 1000 / nmi_hz)); - apic_write(APIC_LVTPC, APIC_DM_NMI); - wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); - return 1; + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } -void setup_apic_nmi_watchdog(void) +void setup_apic_nmi_watchdog(void *unused) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - if (boot_cpu_data.x86 != 15) - return; - if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) - return; - setup_k7_watchdog(); - break; - case X86_VENDOR_INTEL: - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - if (!setup_intel_arch_watchdog()) + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; + + if (wd->enabled == 1) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + return; + + if (nmi_watchdog == NMI_LOCAL_APIC) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) return; - } else if (boot_cpu_data.x86 == 15) { + if (!setup_k7_watchdog()) + return; + break; + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + if (!setup_intel_arch_watchdog()) + return; + break; + } if (!setup_p4_watchdog()) return; - } else { + break; + default: return; } + } + wd->enabled = 1; + atomic_inc(&nmi_active); +} + +void stop_apic_nmi_watchdog(void *unused) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - break; + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; - default: + if (wd->enabled == 0) return; + + if (nmi_watchdog == NMI_LOCAL_APIC) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) + return; + stop_k7_watchdog(); + break; + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + stop_intel_arch_watchdog(); + break; + } + stop_p4_watchdog(); + break; + default: + return; + } } - lapic_nmi_owner = LAPIC_NMI_WATCHDOG; - nmi_active = 1; + wd->enabled = 0; + atomic_dec(&nmi_active); } /* @@ -526,93 +774,109 @@ void touch_nmi_watchdog (void) touch_softlockup_watchdog(); } -void __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) +int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) { int sum; int touched = 0; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + u64 dummy; + int rc=0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } sum = read_pda(apic_timer_irqs); if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; } + #ifdef CONFIG_X86_MCE /* Could check oops_in_progress here too, but it's safer not too */ if (atomic_read(&mce_entry) > 0) touched = 1; #endif + /* if the apic timer isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) { - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - local_set(&__get_cpu_var(alert_counter), 0); - return; - } - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs); - } + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) + die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, + panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); } - if (nmi_perfctr_msr) { - if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) { - /* - * P4 quirks: - * - An overflown perfctr will assert its interrupt - * until the OVF flag in its CCCR is cleared. - * - LVTPC is masked on interrupt and must be - * unmasked by the LVTPC handler. - */ - wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); - apic_write(APIC_LVTPC, APIC_DM_NMI); - } else if (nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { - /* - * For Intel based architectural perfmon - * - LVTPC is masked on interrupt and must be - * unmasked by the LVTPC handler. + + /* see if the nmi watchdog went off */ + if (wd->enabled) { + if (nmi_watchdog == NMI_LOCAL_APIC) { + rdmsrl(wd->perfctr_msr, dummy); + if (dummy & wd->check_bit){ + /* this wasn't a watchdog timer interrupt */ + goto done; + } + + /* only Intel uses the cccr msr */ + if (wd->cccr_msr != 0) { + /* + * P4 quirks: + * - An overflown perfctr will assert its interrupt + * until the OVF flag in its CCCR is cleared. + * - LVTPC is masked on interrupt and must be + * unmasked by the LVTPC handler. + */ + rdmsrl(wd->cccr_msr, dummy); + dummy &= ~P4_CCCR_OVF; + wrmsrl(wd->cccr_msr, dummy); + apic_write(APIC_LVTPC, APIC_DM_NMI); + } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { + /* + * ArchPerfom/Core Duo needs to re-unmask + * the apic vector + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + } + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + rc = 1; + } else if (nmi_watchdog == NMI_IO_APIC) { + /* don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. */ - apic_write(APIC_LVTPC, APIC_DM_NMI); - } - wrmsrl(nmi_perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + rc = 1; + } else + printk(KERN_WARNING "Unknown enabled NMI hardware?!\n"); } +done: + return rc; } -static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu) -{ - return 0; -} - -static nmi_callback_t nmi_callback = dummy_nmi_callback; - asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) { - int cpu = safe_smp_processor_id(); - nmi_enter(); add_pda(__nmi_count,1); - if (!rcu_dereference(nmi_callback)(regs, cpu)) - default_do_nmi(regs); + default_do_nmi(regs); nmi_exit(); } -void set_nmi_callback(nmi_callback_t callback) +int do_nmi_callback(struct pt_regs * regs, int cpu) { - vmalloc_sync_all(); - rcu_assign_pointer(nmi_callback, callback); -} -EXPORT_SYMBOL_GPL(set_nmi_callback); - -void unset_nmi_callback(void) -{ - nmi_callback = dummy_nmi_callback; +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; } -EXPORT_SYMBOL_GPL(unset_nmi_callback); #ifdef CONFIG_SYSCTL @@ -621,36 +885,42 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) unsigned char reason = get_nmi_reason(); char buf[64]; - if (!(reason & 0xc0)) { - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf,regs); - } + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(buf, regs, 1); /* Always panic here */ return 0; } /* - * proc handler for /proc/sys/kernel/unknown_nmi_panic + * proc handler for /proc/sys/kernel/nmi */ -int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file, +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, loff_t *ppos) { int old_state; - old_state = unknown_nmi_panic; + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!unknown_nmi_panic) + if (!!old_state == !!nmi_watchdog_enabled) return 0; - if (unknown_nmi_panic) { - if (reserve_lapic_nmi() < 0) { - unknown_nmi_panic = 0; - return -EBUSY; - } else { - set_nmi_callback(unknown_nmi_panic_callback); - } + if (atomic_read(&nmi_active) < 0) { + printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); } else { - release_lapic_nmi(); - unset_nmi_callback(); + printk( KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; } return 0; } @@ -659,8 +929,12 @@ int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file EXPORT_SYMBOL(nmi_active); EXPORT_SYMBOL(nmi_watchdog); -EXPORT_SYMBOL(reserve_lapic_nmi); -EXPORT_SYMBOL(release_lapic_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); +EXPORT_SYMBOL(reserve_perfctr_nmi); +EXPORT_SYMBOL(release_perfctr_nmi); +EXPORT_SYMBOL(reserve_evntsel_nmi); +EXPORT_SYMBOL(release_evntsel_nmi); EXPORT_SYMBOL(disable_timer_nmi_watchdog); EXPORT_SYMBOL(enable_timer_nmi_watchdog); EXPORT_SYMBOL(touch_nmi_watchdog); diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index 146924ba5df..cfb09b07ae9 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -86,7 +86,8 @@ #define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */ #define MAX_NUM_CHASSIS 8 /* max number of chassis */ -#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) /* max dev->bus->number */ +/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */ +#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) #define PHBS_PER_CALGARY 4 /* register offsets in Calgary's internal register space */ @@ -111,31 +112,49 @@ static const unsigned long phb_offsets[] = { 0xB000 /* PHB3 */ }; -static char bus_to_phb[MAX_PHB_BUS_NUM]; -void* tce_table_kva[MAX_PHB_BUS_NUM]; unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; static int translate_empty_slots __read_mostly = 0; static int calgary_detected __read_mostly = 0; -/* - * the bitmap of PHBs the user requested that we disable - * translation on. - */ -static DECLARE_BITMAP(translation_disabled, MAX_PHB_BUS_NUM); +struct calgary_bus_info { + void *tce_space; + unsigned char translation_disabled; + signed char phbid; +}; + +static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, }; static void tce_cache_blast(struct iommu_table *tbl); /* enable this to stress test the chip's TCE cache */ #ifdef CONFIG_IOMMU_DEBUG -static inline void tce_cache_blast_stress(struct iommu_table *tbl) +int debugging __read_mostly = 1; + +static inline unsigned long verify_bit_range(unsigned long* bitmap, + int expected, unsigned long start, unsigned long end) { - tce_cache_blast(tbl); + unsigned long idx = start; + + BUG_ON(start >= end); + + while (idx < end) { + if (!!test_bit(idx, bitmap) != expected) + return idx; + ++idx; + } + + /* all bits have the expected value */ + return ~0UL; } -#else -static inline void tce_cache_blast_stress(struct iommu_table *tbl) +#else /* debugging is disabled */ +int debugging __read_mostly = 0; + +static inline unsigned long verify_bit_range(unsigned long* bitmap, + int expected, unsigned long start, unsigned long end) { + return ~0UL; } -#endif /* BLAST_TCE_CACHE_ON_UNMAP */ +#endif /* CONFIG_IOMMU_DEBUG */ static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen) { @@ -149,7 +168,7 @@ static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen) static inline int translate_phb(struct pci_dev* dev) { - int disabled = test_bit(dev->bus->number, translation_disabled); + int disabled = bus_info[dev->bus->number].translation_disabled; return !disabled; } @@ -158,6 +177,7 @@ static void iommu_range_reserve(struct iommu_table *tbl, { unsigned long index; unsigned long end; + unsigned long badbit; index = start_addr >> PAGE_SHIFT; @@ -169,14 +189,15 @@ static void iommu_range_reserve(struct iommu_table *tbl, if (end > tbl->it_size) /* don't go off the table */ end = tbl->it_size; - while (index < end) { - if (test_bit(index, tbl->it_map)) + badbit = verify_bit_range(tbl->it_map, 0, index, end); + if (badbit != ~0UL) { + if (printk_ratelimit()) printk(KERN_ERR "Calgary: entry already allocated at " "0x%lx tbl %p dma 0x%lx npages %u\n", - index, tbl, start_addr, npages); - ++index; + badbit, tbl, start_addr, npages); } - set_bit_string(tbl->it_map, start_addr >> PAGE_SHIFT, npages); + + set_bit_string(tbl->it_map, index, npages); } static unsigned long iommu_range_alloc(struct iommu_table *tbl, @@ -243,7 +264,7 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, unsigned int npages) { unsigned long entry; - unsigned long i; + unsigned long badbit; entry = dma_addr >> PAGE_SHIFT; @@ -251,16 +272,15 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, tce_free(tbl, entry, npages); - for (i = 0; i < npages; ++i) { - if (!test_bit(entry + i, tbl->it_map)) + badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages); + if (badbit != ~0UL) { + if (printk_ratelimit()) printk(KERN_ERR "Calgary: bit is off at 0x%lx " "tbl %p dma 0x%Lx entry 0x%lx npages %u\n", - entry + i, tbl, dma_addr, entry, npages); + badbit, tbl, dma_addr, entry, npages); } __clear_bit_string(tbl->it_map, entry, npages); - - tce_cache_blast_stress(tbl); } static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, @@ -454,7 +474,7 @@ static struct dma_mapping_ops calgary_dma_ops = { static inline int busno_to_phbid(unsigned char num) { - return bus_to_phb[num]; + return bus_info[num].phbid; } static inline unsigned long split_queue_offset(unsigned char num) @@ -631,6 +651,10 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) if (ret) return ret; + tbl = dev->sysdata; + tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space; + tce_free(tbl, 0, tbl->it_size); + calgary_reserve_regions(dev); /* set TARs for each PHB */ @@ -654,11 +678,12 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) return 0; } -static void __init calgary_free_tar(struct pci_dev *dev) +static void __init calgary_free_bus(struct pci_dev *dev) { u64 val64; struct iommu_table *tbl = dev->sysdata; void __iomem *target; + unsigned int bitmapsz; target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number)); val64 = be64_to_cpu(readq(target)); @@ -666,8 +691,15 @@ static void __init calgary_free_tar(struct pci_dev *dev) writeq(cpu_to_be64(val64), target); readq(target); /* flush */ + bitmapsz = tbl->it_size / BITS_PER_BYTE; + free_pages((unsigned long)tbl->it_map, get_order(bitmapsz)); + tbl->it_map = NULL; + kfree(tbl); dev->sysdata = NULL; + + /* Can't free bootmem allocated memory after system is up :-( */ + bus_info[dev->bus->number].tce_space = NULL; } static void calgary_watchdog(unsigned long data) @@ -772,12 +804,11 @@ static inline unsigned int __init locate_register_space(struct pci_dev *dev) return address; } -static int __init calgary_init_one_nontraslated(struct pci_dev *dev) +static void __init calgary_init_one_nontraslated(struct pci_dev *dev) { + pci_dev_get(dev); dev->sysdata = NULL; dev->bus->self = dev; - - return 0; } static int __init calgary_init_one(struct pci_dev *dev) @@ -798,6 +829,7 @@ static int __init calgary_init_one(struct pci_dev *dev) if (ret) goto iounmap; + pci_dev_get(dev); dev->bus->self = dev; calgary_enable_translation(dev); @@ -824,10 +856,9 @@ static int __init calgary_init(void) calgary_init_one_nontraslated(dev); continue; } - if (!tce_table_kva[dev->bus->number] && !translate_empty_slots) { - pci_dev_put(dev); + if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots) continue; - } + ret = calgary_init_one(dev); if (ret) goto error; @@ -840,15 +871,18 @@ error: dev = pci_find_device_reverse(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CALGARY, dev); + if (!dev) + break; if (!translate_phb(dev)) { pci_dev_put(dev); continue; } - if (!tce_table_kva[dev->bus->number] && !translate_empty_slots) + if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots) continue; + calgary_disable_translation(dev); - calgary_free_tar(dev); - pci_dev_put(dev); + calgary_free_bus(dev); + pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ } return ret; @@ -890,13 +924,15 @@ void __init detect_calgary(void) if (swiotlb || no_iommu || iommu_detected) return; + if (!early_pci_allowed()) + return; + specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE); for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) { int dev; - - tce_table_kva[bus] = NULL; - bus_to_phb[bus] = -1; + struct calgary_bus_info *info = &bus_info[bus]; + info->phbid = -1; if (read_pci_config(bus, 0, 0, 0) != PCI_VENDOR_DEVICE_ID_CALGARY) continue; @@ -907,12 +943,9 @@ void __init detect_calgary(void) */ phb = (phb + 1) % PHBS_PER_CALGARY; - if (test_bit(bus, translation_disabled)) { - printk(KERN_INFO "Calgary: translation is disabled for " - "PHB 0x%x\n", bus); - /* skip this phb, don't allocate a tbl for it */ + if (info->translation_disabled) continue; - } + /* * Scan the slots of the PCI bus to see if there is a device present. * The parent bus will be the zero-ith device, so start at 1. @@ -923,8 +956,8 @@ void __init detect_calgary(void) tbl = alloc_tce_table(); if (!tbl) goto cleanup; - tce_table_kva[bus] = tbl; - bus_to_phb[bus] = phb; + info->tce_space = tbl; + info->phbid = phb; calgary_found = 1; break; } @@ -934,15 +967,20 @@ void __init detect_calgary(void) if (calgary_found) { iommu_detected = 1; calgary_detected = 1; - printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected. " - "TCE table spec is %d.\n", specified_table_size); + printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n"); + printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " + "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, + debugging ? "enabled" : "disabled"); } return; cleanup: - for (--bus; bus >= 0; --bus) - if (tce_table_kva[bus]) - free_tce_table(tce_table_kva[bus]); + for (--bus; bus >= 0; --bus) { + struct calgary_bus_info *info = &bus_info[bus]; + + if (info->tce_space) + free_tce_table(info->tce_space); + } } int __init calgary_iommu_init(void) @@ -1016,7 +1054,7 @@ static int __init calgary_parse_options(char *p) if (bridge < MAX_PHB_BUS_NUM) { printk(KERN_INFO "Calgary: disabling " "translation for PHB 0x%x\n", bridge); - set_bit(bridge, translation_disabled); + bus_info[bridge].translation_disabled = 1; } } diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 9c44f4f2433..4dcb671bd19 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -236,6 +236,9 @@ __init int iommu_setup(char *p) { iommu_merge = 1; + if (!p) + return -EINVAL; + while (*p) { if (!strncmp(p,"off",3)) no_iommu = 1; @@ -278,9 +281,9 @@ __init int iommu_setup(char *p) if (*p == ',') ++p; } - return 1; + return 0; } -__setup("iommu=", iommu_setup); +early_param("iommu", iommu_setup); void __init pci_iommu_alloc(void) { diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 6d3e61baf7a..16261a8a330 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -239,8 +239,6 @@ dma_addr_t gart_map_single(struct device *dev, void *addr, size_t size, int dir) { unsigned long phys_mem, bus; - BUG_ON(dir == DMA_NONE); - if (!dev) dev = &fallback_dev; @@ -383,7 +381,6 @@ int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) unsigned long pages = 0; int need = 0, nextneed; - BUG_ON(dir == DMA_NONE); if (nents == 0) return 0; diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c index aad7609d8e9..df09ab05a1b 100644 --- a/arch/x86_64/kernel/pci-nommu.c +++ b/arch/x86_64/kernel/pci-nommu.c @@ -59,7 +59,6 @@ int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, { int i; - BUG_ON(direction == DMA_NONE); for (i = 0; i < nents; i++ ) { struct scatterlist *s = &sg[i]; BUG_ON(!s->page); diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index bb6745d13b8..458006ae19f 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -80,25 +80,25 @@ void idle_notifier_unregister(struct notifier_block *n) } EXPORT_SYMBOL(idle_notifier_unregister); -enum idle_state { CPU_IDLE, CPU_NOT_IDLE }; -static DEFINE_PER_CPU(enum idle_state, idle_state) = CPU_NOT_IDLE; - void enter_idle(void) { - __get_cpu_var(idle_state) = CPU_IDLE; + write_pda(isidle, 1); atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); } static void __exit_idle(void) { - __get_cpu_var(idle_state) = CPU_NOT_IDLE; + if (read_pda(isidle) == 0) + return; + write_pda(isidle, 0); atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); } /* Called from interrupts to signify idle end */ void exit_idle(void) { - if (current->pid | read_pda(irqcount)) + /* idle loop has pid 0 */ + if (current->pid) return; __exit_idle(); } @@ -220,6 +220,9 @@ void cpu_idle (void) play_dead(); enter_idle(); idle(); + /* In many cases the interrupt that ended idle + has already called exit_idle. But some idle + loops can be woken up without interrupt. */ __exit_idle(); } @@ -350,6 +353,7 @@ void exit_thread(void) kfree(t->io_bitmap_ptr); t->io_bitmap_ptr = NULL; + clear_thread_flag(TIF_IO_BITMAP); /* * Careful, clear this in the TSS too: */ @@ -369,6 +373,7 @@ void flush_thread(void) if (t->flags & _TIF_IA32) current_thread_info()->status |= TS_COMPAT; } + t->flags &= ~_TIF_DEBUG; tsk->thread.debugreg0 = 0; tsk->thread.debugreg1 = 0; @@ -461,7 +466,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, asm("mov %%es,%0" : "=m" (p->thread.es)); asm("mov %%ds,%0" : "=m" (p->thread.ds)); - if (unlikely(me->thread.io_bitmap_ptr != NULL)) { + if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); if (!p->thread.io_bitmap_ptr) { p->thread.io_bitmap_max = 0; @@ -469,6 +474,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, } memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, IO_BITMAP_BYTES); + set_tsk_thread_flag(p, TIF_IO_BITMAP); } /* @@ -498,6 +504,40 @@ out: */ #define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r) +static inline void __switch_to_xtra(struct task_struct *prev_p, + struct task_struct *next_p, + struct tss_struct *tss) +{ + struct thread_struct *prev, *next; + + prev = &prev_p->thread, + next = &next_p->thread; + + if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { + loaddebug(next, 0); + loaddebug(next, 1); + loaddebug(next, 2); + loaddebug(next, 3); + /* no 4 and 5 */ + loaddebug(next, 6); + loaddebug(next, 7); + } + + if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { + /* + * Copy the relevant range of the IO bitmap. + * Normally this is 128 bytes or less: + */ + memcpy(tss->io_bitmap, next->io_bitmap_ptr, + max(prev->io_bitmap_max, next->io_bitmap_max)); + } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) { + /* + * Clear any possible leftover bits: + */ + memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); + } +} + /* * switch_to(x,y) should switch tasks from x to y. * @@ -515,6 +555,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); + /* we're going to use this soon, after a few expensive things */ + if (next_p->fpu_counter>5) + prefetch(&next->i387.fxsave); + /* * Reload esp0, LDT and the page table pointer: */ @@ -583,41 +627,29 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) And the AMD workaround requires it to be after DS reload. */ unlazy_fpu(prev_p); write_pda(kernelstack, - task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); - + (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); +#ifdef CONFIG_CC_STACKPROTECTOR + write_pda(stack_canary, next_p->stack_canary); /* - * Now maybe reload the debug registers + * Build time only check to make sure the stack_canary is at + * offset 40 in the pda; this is a gcc ABI requirement */ - if (unlikely(next->debugreg7)) { - loaddebug(next, 0); - loaddebug(next, 1); - loaddebug(next, 2); - loaddebug(next, 3); - /* no 4 and 5 */ - loaddebug(next, 6); - loaddebug(next, 7); - } - + BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40); +#endif - /* - * Handle the IO bitmap - */ - if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr)) { - if (next->io_bitmap_ptr) - /* - * Copy the relevant range of the IO bitmap. - * Normally this is 128 bytes or less: - */ - memcpy(tss->io_bitmap, next->io_bitmap_ptr, - max(prev->io_bitmap_max, next->io_bitmap_max)); - else { - /* - * Clear any possible leftover bits: - */ - memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); - } - } + /* + * Now maybe reload the debug registers and handle I/O bitmaps + */ + if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW)) + || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) + __switch_to_xtra(prev_p, next_p, tss); + /* If the task has used fpu the last 5 timeslices, just do a full + * restore of the math state immediately to avoid the trap; the + * chances of needing FPU soon are obviously high now + */ + if (next_p->fpu_counter>5) + math_state_restore(); return prev_p; } @@ -834,7 +866,7 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) unsigned long arch_align_stack(unsigned long sp) { - if (randomize_va_space) + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) sp -= get_random_int() % 8192; return sp & ~0xf; } diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index 2d50024c9f3..addc14af0c5 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -116,17 +116,17 @@ unsigned long convert_rip_to_linear(struct task_struct *child, struct pt_regs *r return addr; } -static int is_at_popf(struct task_struct *child, struct pt_regs *regs) +static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) { int i, copied; - unsigned char opcode[16]; + unsigned char opcode[15]; unsigned long addr = convert_rip_to_linear(child, regs); copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); for (i = 0; i < copied; i++) { switch (opcode[i]) { - /* popf */ - case 0x9d: + /* popf and iret */ + case 0x9d: case 0xcf: return 1; /* CHECKME: 64 65 */ @@ -138,14 +138,17 @@ static int is_at_popf(struct task_struct *child, struct pt_regs *regs) case 0x26: case 0x2e: case 0x36: case 0x3e: case 0x64: case 0x65: - case 0xf0: case 0xf2: case 0xf3: + case 0xf2: case 0xf3: continue; - /* REX prefixes */ case 0x40 ... 0x4f: + if (regs->cs != __USER_CS) + /* 32-bit mode: register increment */ + return 0; + /* 64-bit mode: REX prefix */ continue; - /* CHECKME: f0, f2, f3 */ + /* CHECKME: f2, f3 */ /* * pushf: NOTE! We should probably not let @@ -186,10 +189,8 @@ static void set_singlestep(struct task_struct *child) * ..but if TF is changed by the instruction we will trace, * don't mark it as being "us" that set it, so that we * won't clear it by hand later. - * - * AK: this is not enough, LAHF and IRET can change TF in user space too. */ - if (is_at_popf(child, regs)) + if (is_setting_trap_flag(child, regs)) return; child->ptrace |= PT_DTRACE; @@ -420,9 +421,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1) break; if (i == 4) { - child->thread.debugreg7 = data; + child->thread.debugreg7 = data; + if (data) + set_tsk_thread_flag(child, TIF_DEBUG); + else + clear_tsk_thread_flag(child, TIF_DEBUG); ret = 0; - } + } break; } break; diff --git a/arch/x86_64/kernel/relocate_kernel.S b/arch/x86_64/kernel/relocate_kernel.S index d24fa9b72a2..14e95872c6a 100644 --- a/arch/x86_64/kernel/relocate_kernel.S +++ b/arch/x86_64/kernel/relocate_kernel.S @@ -7,31 +7,169 @@ */ #include <linux/linkage.h> +#include <asm/page.h> +#include <asm/kexec.h> - /* - * Must be relocatable PIC code callable as a C function, that once - * it starts can not use the previous processes stack. - */ - .globl relocate_new_kernel +/* + * Must be relocatable PIC code callable as a C function + */ + +#define PTR(x) (x << 3) +#define PAGE_ALIGNED (1 << PAGE_SHIFT) +#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ + + .text + .align PAGE_ALIGNED .code64 + .globl relocate_kernel +relocate_kernel: + /* %rdi indirection_page + * %rsi page_list + * %rdx start address + */ + + /* map the control page at its virtual address */ + + movq $0x0000ff8000000000, %r10 /* mask */ + mov $(39 - 3), %cl /* bits to shift */ + movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PGD)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PUD_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PUD_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PMD_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PMD_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PTE_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PTE_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + /* identity map the control page at its physical address */ + + movq $0x0000ff8000000000, %r10 /* mask */ + mov $(39 - 3), %cl /* bits to shift */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PGD)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PUD_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PUD_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PMD_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PMD_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PTE_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PTE_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + relocate_new_kernel: - /* %rdi page_list - * %rsi reboot_code_buffer + /* %rdi indirection_page + * %rsi page_list * %rdx start address - * %rcx page_table - * %r8 arg5 - * %r9 arg6 */ /* zero out flags, and disable interrupts */ pushq $0 popfq - /* set a new stack at the bottom of our page... */ - lea 4096(%rsi), %rsp + /* get physical address of control page now */ + /* this is impossible after page table switch */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + + /* get physical address of page table now too */ + movq PTR(PA_TABLE_PAGE)(%rsi), %rcx - /* store the parameters back on the stack */ - pushq %rdx /* store the start address */ + /* switch to new set of page tables */ + movq PTR(PA_PGD)(%rsi), %r9 + movq %r9, %cr3 + + /* setup a new stack at the end of the physical control page */ + lea 4096(%r8), %rsp + + /* jump to identity mapped page */ + addq $(identity_mapped - relocate_kernel), %r8 + pushq %r8 + ret + +identity_mapped: + /* store the start address on the stack */ + pushq %rdx /* Set cr0 to a known state: * 31 1 == Paging enabled @@ -136,8 +274,3 @@ relocate_new_kernel: xorq %r15, %r15 ret -relocate_new_kernel_end: - - .globl relocate_new_kernel_size -relocate_new_kernel_size: - .quad relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 34afad70482..0b00bb2ea57 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -74,16 +74,6 @@ EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -int acpi_disabled; -EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI -extern int __initdata acpi_ht; -extern acpi_interrupt_flags acpi_sci_flags; -int __initdata acpi_force = 0; -#endif - -int acpi_numa __initdata; - /* Boot loader ID as an integer, for the benefit of proc_dointvec */ int bootloader_type; @@ -107,7 +97,6 @@ struct sys_desc_table_struct { struct edid_info edid_info; EXPORT_SYMBOL_GPL(edid_info); -struct e820map e820; extern int root_mountflags; @@ -276,185 +265,22 @@ static void __init probe_roms(void) } } -/* Check for full argument with no trailing characters */ -static int fullarg(char *p, char *arg) +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. This option will be passed + * by kexec loader to the capture kernel. + */ +static int __init setup_elfcorehdr(char *arg) { - int l = strlen(arg); - return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l])); + char *end; + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &end); + return end > arg ? 0 : -EINVAL; } - -static __init void parse_cmdline_early (char ** cmdline_p) -{ - char c = ' ', *to = command_line, *from = COMMAND_LINE; - int len = 0; - int userdef = 0; - - for (;;) { - if (c != ' ') - goto next_char; - -#ifdef CONFIG_SMP - /* - * If the BIOS enumerates physical processors before logical, - * maxcpus=N at enumeration-time can be used to disable HT. - */ - else if (!memcmp(from, "maxcpus=", 8)) { - extern unsigned int maxcpus; - - maxcpus = simple_strtoul(from + 8, NULL, 0); - } -#endif -#ifdef CONFIG_ACPI - /* "acpi=off" disables both ACPI table parsing and interpreter init */ - if (fullarg(from,"acpi=off")) - disable_acpi(); - - if (fullarg(from, "acpi=force")) { - /* add later when we do DMI horrors: */ - acpi_force = 1; - acpi_disabled = 0; - } - - /* acpi=ht just means: do ACPI MADT parsing - at bootup, but don't enable the full ACPI interpreter */ - if (fullarg(from, "acpi=ht")) { - if (!acpi_force) - disable_acpi(); - acpi_ht = 1; - } - else if (fullarg(from, "pci=noacpi")) - acpi_disable_pci(); - else if (fullarg(from, "acpi=noirq")) - acpi_noirq_set(); - - else if (fullarg(from, "acpi_sci=edge")) - acpi_sci_flags.trigger = 1; - else if (fullarg(from, "acpi_sci=level")) - acpi_sci_flags.trigger = 3; - else if (fullarg(from, "acpi_sci=high")) - acpi_sci_flags.polarity = 1; - else if (fullarg(from, "acpi_sci=low")) - acpi_sci_flags.polarity = 3; - - /* acpi=strict disables out-of-spec workarounds */ - else if (fullarg(from, "acpi=strict")) { - acpi_strict = 1; - } -#ifdef CONFIG_X86_IO_APIC - else if (fullarg(from, "acpi_skip_timer_override")) - acpi_skip_timer_override = 1; -#endif -#endif - - if (fullarg(from, "disable_timer_pin_1")) - disable_timer_pin_1 = 1; - if (fullarg(from, "enable_timer_pin_1")) - disable_timer_pin_1 = -1; - - if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) { - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - disable_apic = 1; - } - - if (fullarg(from, "noapic")) - skip_ioapic_setup = 1; - - if (fullarg(from,"apic")) { - skip_ioapic_setup = 0; - ioapic_force = 1; - } - - if (!memcmp(from, "mem=", 4)) - parse_memopt(from+4, &from); - - if (!memcmp(from, "memmap=", 7)) { - /* exactmap option is for used defined memory */ - if (!memcmp(from+7, "exactmap", 8)) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - saved_max_pfn = e820_end_of_ram(); -#endif - from += 8+7; - end_pfn_map = 0; - e820.nr_map = 0; - userdef = 1; - } - else { - parse_memmapopt(from+7, &from); - userdef = 1; - } - } - -#ifdef CONFIG_NUMA - if (!memcmp(from, "numa=", 5)) - numa_setup(from+5); +early_param("elfcorehdr", setup_elfcorehdr); #endif - if (!memcmp(from,"iommu=",6)) { - iommu_setup(from+6); - } - - if (fullarg(from,"oops=panic")) - panic_on_oops = 1; - - if (!memcmp(from, "noexec=", 7)) - nonx_setup(from + 7); - -#ifdef CONFIG_KEXEC - /* crashkernel=size@addr specifies the location to reserve for - * a crash kernel. By reserving this memory we guarantee - * that linux never set's it up as a DMA target. - * Useful for holding code to do something appropriate - * after a kernel panic. - */ - else if (!memcmp(from, "crashkernel=", 12)) { - unsigned long size, base; - size = memparse(from+12, &from); - if (*from == '@') { - base = memparse(from+1, &from); - /* FIXME: Do I want a sanity check - * to validate the memory range? - */ - crashk_res.start = base; - crashk_res.end = base + size - 1; - } - } -#endif - -#ifdef CONFIG_PROC_VMCORE - /* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. This option will be passed - * by kexec loader to the capture kernel. - */ - else if(!memcmp(from, "elfcorehdr=", 11)) - elfcorehdr_addr = memparse(from+11, &from); -#endif - -#ifdef CONFIG_HOTPLUG_CPU - else if (!memcmp(from, "additional_cpus=", 16)) - setup_additional_cpus(from+16); -#endif - - next_char: - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - if (userdef) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - e820_print_map("user"); - } - *to = '\0'; - *cmdline_p = command_line; -} - #ifndef CONFIG_NUMA static void __init contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) @@ -466,7 +292,8 @@ contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) if (bootmap == -1L) panic("Cannot find bootmem map of size %ld\n",bootmap_size); bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn); - e820_bootmem_free(NODE_DATA(0), 0, end_pfn << PAGE_SHIFT); + e820_register_active_regions(0, start_pfn, end_pfn); + free_bootmem_with_active_regions(0, end_pfn); reserve_bootmem(bootmap, bootmap_size); } #endif @@ -521,6 +348,8 @@ static void discover_ebda(void) void __init setup_arch(char **cmdline_p) { + printk(KERN_INFO "Command line: %s\n", saved_command_line); + ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); screen_info = SCREEN_INFO; edid_info = EDID_INFO; @@ -547,16 +376,22 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(&_etext); data_resource.end = virt_to_phys(&_edata)-1; - parse_cmdline_early(cmdline_p); - early_identify_cpu(&boot_cpu_data); + strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + parse_early_param(); + + finish_e820_parsing(); + + e820_register_active_regions(0, 0, -1UL); /* * partially used pages are not usable - thus * we are rounding upwards: */ end_pfn = e820_end_of_ram(); - num_physpages = end_pfn; /* for pfn_valid */ + num_physpages = end_pfn; check_efer(); @@ -576,6 +411,14 @@ void __init setup_arch(char **cmdline_p) acpi_boot_table_init(); #endif + /* How many end-of-memory variables you have, grandma! */ + max_low_pfn = end_pfn; + max_pfn = end_pfn; + high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1; + + /* Remove active ranges so rediscovery with NUMA-awareness happens */ + remove_all_active_ranges(); + #ifdef CONFIG_ACPI_NUMA /* * Parse SRAT to discover nodes. @@ -625,12 +468,10 @@ void __init setup_arch(char **cmdline_p) */ acpi_reserve_bootmem(); #endif -#ifdef CONFIG_X86_LOCAL_APIC /* * Find and reserve possible boot-time SMP configuration: */ find_smp_config(); -#endif #ifdef CONFIG_BLK_DEV_INITRD if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) { @@ -657,7 +498,9 @@ void __init setup_arch(char **cmdline_p) paging_init(); - check_ioapic(); +#ifdef CONFIG_PCI + early_quirks(); +#endif /* * set this early, so we dont allocate cpu0 @@ -674,14 +517,12 @@ void __init setup_arch(char **cmdline_p) init_cpu_to_node(); -#ifdef CONFIG_X86_LOCAL_APIC /* * get boot-time SMP configuration: */ if (smp_found_config) get_smp_config(); init_apic_mappings(); -#endif /* * Request address space for all standard RAM and ROM resources @@ -689,6 +530,7 @@ void __init setup_arch(char **cmdline_p) */ probe_roms(); e820_reserve_resources(); + e820_mark_nosave_regions(); request_resource(&iomem_resource, &video_ram_resource); @@ -838,7 +680,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif } -static void __init init_amd(struct cpuinfo_x86 *c) +static void __cpuinit init_amd(struct cpuinfo_x86 *c) { unsigned level; @@ -894,6 +736,12 @@ static void __init init_amd(struct cpuinfo_x86 *c) /* Fix cpuid4 emulation for more */ num_cache_leaves = 3; + + /* When there is only one core no need to synchronize RDTSC */ + if (num_possible_cpus() == 1) + set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); + else + clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); } static void __cpuinit detect_ht(struct cpuinfo_x86 *c) @@ -975,8 +823,7 @@ static void srat_detect_node(void) node = first_node(node_online_map); numa_set_node(cpu, node); - if (acpi_numa > 0) - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); #endif } @@ -1010,6 +857,8 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); + if (c->x86 == 6) + set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); c->x86_max_cores = intel_num_cpu_cores(c); @@ -1228,8 +1077,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", - "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 417de564456..8c4b80fe71a 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -24,7 +24,7 @@ #include <asm/proto.h> #include <asm/sections.h> -char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,}; +char x86_boot_params[BOOT_PARAM_SIZE] __initdata; cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; @@ -46,8 +46,10 @@ Control non executable mappings for 64bit processes. on Enable(default) off Disable */ -int __init nonx_setup(char *str) +static int __init nonx_setup(char *str) { + if (!str) + return -EINVAL; if (!strncmp(str, "on", 2)) { __supported_pte_mask |= _PAGE_NX; do_not_nx = 0; @@ -55,9 +57,9 @@ int __init nonx_setup(char *str) do_not_nx = 1; __supported_pte_mask &= ~_PAGE_NX; } - return 1; + return 0; } -__setup("noexec=", nonx_setup); /* parsed early actually */ +early_param("noexec", nonx_setup); int force_personality32 = 0; @@ -93,12 +95,9 @@ void __init setup_per_cpu_areas(void) #endif /* Copy section for each CPU (we discard the original) */ - size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); -#ifdef CONFIG_MODULES - if (size < PERCPU_ENOUGH_ROOM) - size = PERCPU_ENOUGH_ROOM; -#endif + size = PERCPU_ENOUGH_ROOM; + printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size); for_each_cpu_mask (i, cpu_possible_map) { char *ptr; @@ -122,7 +121,10 @@ void pda_init(int cpu) /* Setup up data that may be needed in __get_free_pages early */ asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); + /* Memory clobbers used to order PDA accessed */ + mb(); wrmsrl(MSR_GS_BASE, pda); + mb(); pda->cpunumber = cpu; pda->irqcount = -1; @@ -178,6 +180,8 @@ void __cpuinit check_efer(void) } } +unsigned long kernel_eflags; + /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT @@ -235,28 +239,17 @@ void __cpuinit cpu_init (void) * set up and load the per-CPU TSS */ for (v = 0; v < N_EXCEPTION_STACKS; v++) { + static const unsigned int order[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + }; if (cpu) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); if (!estacks) panic("Cannot allocate exception stack %ld %d\n", v, cpu); } - switch (v + 1) { -#if DEBUG_STKSZ > EXCEPTION_STKSZ - case DEBUG_STACK: - cpu_pda(cpu)->debugstack = (unsigned long)estacks; - estacks += DEBUG_STKSZ; - break; -#endif - default: - estacks += EXCEPTION_STKSZ; - break; - } + estacks += PAGE_SIZE << order[v]; orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks; } @@ -290,4 +283,6 @@ void __cpuinit cpu_init (void) set_debugreg(0UL, 7); fpu_init(); + + raw_local_save_flags(kernel_eflags); } diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 28161170fb0..49ec324cd14 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -38,37 +38,6 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs); asmlinkage long -sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -#ifdef DEBUG_SIG - printk("rt_sigsuspend savset(%lx) newset(%lx) regs(%p) rip(%lx)\n", - saveset, newset, regs, regs->rip); -#endif - regs->rax = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset)) - return -EINTR; - } -} - -asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) { @@ -308,11 +277,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, #endif /* Set up registers for signal handler */ - { - struct exec_domain *ed = current_thread_info()->exec_domain; - if (unlikely(ed && ed->signal_invmap && sig < 32)) - sig = ed->signal_invmap[sig]; - } regs->rdi = sig; /* In case the signal handler was declared without prototypes */ regs->rax = 0; @@ -341,11 +305,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return 1; + return 0; give_sigsegv: force_sigsegv(sig, current); - return 0; + return -EFAULT; } /* @@ -408,7 +372,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, #endif ret = setup_rt_frame(sig, ka, info, oldset, regs); - if (ret) { + if (ret == 0) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NODEFER)) @@ -425,11 +389,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) +static void do_signal(struct pt_regs *regs) { struct k_sigaction ka; siginfo_t info; int signr; + sigset_t *oldset; /* * We want the common case to go fast, which @@ -438,9 +403,11 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) * if so. */ if (!user_mode(regs)) - return 1; + return; - if (!oldset) + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -454,30 +421,46 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) set_debugreg(current->thread.debugreg7, 7); /* Whee! Actually deliver the signal. */ - return handle_signal(signr, &info, &ka, oldset, regs); + if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + return; } /* Did we come from a system call? */ if ((long)regs->orig_rax >= 0) { /* Restart the system call - no handlers present */ long res = regs->rax; - if (res == -ERESTARTNOHAND || - res == -ERESTARTSYS || - res == -ERESTARTNOINTR) { + switch (res) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: regs->rax = regs->orig_rax; regs->rip -= 2; - } - if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) { + break; + case -ERESTART_RESTARTBLOCK: regs->rax = test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall; regs->rip -= 2; + break; } } - return 0; + + /* if there's no signal to deliver, we just put the saved sigmask + back. */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } } -void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, __u32 thread_info_flags) +void +do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { #ifdef DEBUG_SIG printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%lx pending:%lx\n", @@ -491,8 +474,8 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, __u32 thread_info_ } /* deal with pending signal delivery */ - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(regs,oldset); + if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK)) + do_signal(regs); } void signal_fault(struct pt_regs *regs, void __user *frame, char *where) diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 06af6ca6012..4f67697f503 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -522,26 +522,3 @@ asmlinkage void smp_call_function_interrupt(void) } } -int safe_smp_processor_id(void) -{ - unsigned apicid, i; - - if (disable_apic) - return 0; - - apicid = hard_smp_processor_id(); - if (apicid < NR_CPUS && x86_cpu_to_apicid[apicid] == apicid) - return apicid; - - for (i = 0; i < NR_CPUS; ++i) { - if (x86_cpu_to_apicid[i] == apicid) - return i; - } - - /* No entries in x86_cpu_to_apicid? Either no MPS|ACPI, - * or called too early. Either way, we must be CPU 0. */ - if (x86_cpu_to_apicid[0] == BAD_APICID) - return 0; - - return 0; /* Should not happen */ -} diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 975380207b4..7b7a6870288 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -46,9 +46,10 @@ #include <linux/bootmem.h> #include <linux/thread_info.h> #include <linux/module.h> - #include <linux/delay.h> #include <linux/mc146818rtc.h> +#include <linux/smp.h> + #include <asm/mtrr.h> #include <asm/pgalloc.h> #include <asm/desc.h> @@ -1090,7 +1091,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* * Switch from PIC to APIC mode. */ - connect_bsp_APIC(); setup_local_APIC(); if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) { @@ -1175,12 +1175,9 @@ int __cpuinit __cpu_up(unsigned int cpu) void __init smp_cpus_done(unsigned int max_cpus) { smp_cleanup_boot(); - -#ifdef CONFIG_X86_IO_APIC setup_ioapic_dest(); -#endif - check_nmi_watchdog(); + time_init_gtod(); } #ifdef CONFIG_HOTPLUG_CPU @@ -1233,6 +1230,8 @@ int __cpu_disable(void) if (cpu == 0) return -EBUSY; + if (nmi_watchdog == NMI_LOCAL_APIC) + stop_apic_nmi_watchdog(NULL); clear_local_APIC(); /* @@ -1272,11 +1271,11 @@ void __cpu_die(unsigned int cpu) printk(KERN_ERR "CPU %u didn't die...\n", cpu); } -__init int setup_additional_cpus(char *s) +static __init int setup_additional_cpus(char *s) { - return get_option(&s, &additional_cpus); + return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL; } -__setup("additional_cpus=", setup_additional_cpus); +early_param("additional_cpus", setup_additional_cpus); #else /* ... !CONFIG_HOTPLUG_CPU */ diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c index 32cf55eb9af..6026b31d037 100644 --- a/arch/x86_64/kernel/stacktrace.c +++ b/arch/x86_64/kernel/stacktrace.c @@ -7,215 +7,49 @@ */ #include <linux/sched.h> #include <linux/stacktrace.h> +#include <linux/module.h> +#include <asm/stacktrace.h> -#include <asm/smp.h> - -static inline int -in_range(unsigned long start, unsigned long addr, unsigned long end) +static void save_stack_warning(void *data, char *msg) { - return addr >= start && addr <= end; } -static unsigned long -get_stack_end(struct task_struct *task, unsigned long stack) +static void +save_stack_warning_symbol(void *data, char *msg, unsigned long symbol) { - unsigned long stack_start, stack_end, flags; - int i, cpu; - - /* - * The most common case is that we are in the task stack: - */ - stack_start = (unsigned long)task->thread_info; - stack_end = stack_start + THREAD_SIZE; - - if (in_range(stack_start, stack, stack_end)) - return stack_end; - - /* - * We are in an interrupt if irqstackptr is set: - */ - raw_local_irq_save(flags); - cpu = safe_smp_processor_id(); - stack_end = (unsigned long)cpu_pda(cpu)->irqstackptr; - - if (stack_end) { - stack_start = stack_end & ~(IRQSTACKSIZE-1); - if (in_range(stack_start, stack, stack_end)) - goto out_restore; - /* - * We get here if we are in an IRQ context but we - * are also in an exception stack. - */ - } - - /* - * Iterate over all exception stacks, and figure out whether - * 'stack' is in one of them: - */ - for (i = 0; i < N_EXCEPTION_STACKS; i++) { - /* - * set 'end' to the end of the exception stack. - */ - stack_end = per_cpu(init_tss, cpu).ist[i]; - stack_start = stack_end - EXCEPTION_STKSZ; - - /* - * Is 'stack' above this exception frame's end? - * If yes then skip to the next frame. - */ - if (stack >= stack_end) - continue; - /* - * Is 'stack' above this exception frame's start address? - * If yes then we found the right frame. - */ - if (stack >= stack_start) - goto out_restore; - - /* - * If this is a debug stack, and if it has a larger size than - * the usual exception stacks, then 'stack' might still - * be within the lower portion of the debug stack: - */ -#if DEBUG_STKSZ > EXCEPTION_STKSZ - if (i == DEBUG_STACK - 1 && stack >= stack_end - DEBUG_STKSZ) { - /* - * Black magic. A large debug stack is composed of - * multiple exception stack entries, which we - * iterate through now. Dont look: - */ - do { - stack_end -= EXCEPTION_STKSZ; - stack_start -= EXCEPTION_STKSZ; - } while (stack < stack_start); - - goto out_restore; - } -#endif - } - /* - * Ok, 'stack' is not pointing to any of the system stacks. - */ - stack_end = 0; - -out_restore: - raw_local_irq_restore(flags); - - return stack_end; } - -/* - * Save stack-backtrace addresses into a stack_trace buffer: - */ -static inline unsigned long -save_context_stack(struct stack_trace *trace, unsigned int skip, - unsigned long stack, unsigned long stack_end) +static int save_stack_stack(void *data, char *name) { - unsigned long addr; - -#ifdef CONFIG_FRAME_POINTER - unsigned long prev_stack = 0; + struct stack_trace *trace = (struct stack_trace *)data; + return trace->all_contexts ? 0 : -1; +} - while (in_range(prev_stack, stack, stack_end)) { - pr_debug("stack: %p\n", (void *)stack); - addr = (unsigned long)(((unsigned long *)stack)[1]); - pr_debug("addr: %p\n", (void *)addr); - if (!skip) - trace->entries[trace->nr_entries++] = addr-1; - else - skip--; - if (trace->nr_entries >= trace->max_entries) - break; - if (!addr) - return 0; - /* - * Stack frames must go forwards (otherwise a loop could - * happen if the stackframe is corrupted), so we move - * prev_stack forwards: - */ - prev_stack = stack; - stack = (unsigned long)(((unsigned long *)stack)[0]); - } - pr_debug("invalid: %p\n", (void *)stack); -#else - while (stack < stack_end) { - addr = ((unsigned long *)stack)[0]; - stack += sizeof(long); - if (__kernel_text_address(addr)) { - if (!skip) - trace->entries[trace->nr_entries++] = addr-1; - else - skip--; - if (trace->nr_entries >= trace->max_entries) - break; - } +static void save_stack_address(void *data, unsigned long addr) +{ + struct stack_trace *trace = (struct stack_trace *)data; + if (trace->skip > 0) { + trace->skip--; + return; } -#endif - return stack; + if (trace->nr_entries < trace->max_entries - 1) + trace->entries[trace->nr_entries++] = addr; } -#define MAX_STACKS 10 +static struct stacktrace_ops save_stack_ops = { + .warning = save_stack_warning, + .warning_symbol = save_stack_warning_symbol, + .stack = save_stack_stack, + .address = save_stack_address, +}; /* * Save stack-backtrace addresses into a stack_trace buffer. - * If all_contexts is set, all contexts (hardirq, softirq and process) - * are saved. If not set then only the current context is saved. */ -void save_stack_trace(struct stack_trace *trace, - struct task_struct *task, int all_contexts, - unsigned int skip) +void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { - unsigned long stack = (unsigned long)&stack; - int i, nr_stacks = 0, stacks_done[MAX_STACKS]; - - WARN_ON(trace->nr_entries || !trace->max_entries); - - if (!task) - task = current; - - pr_debug("task: %p, ti: %p\n", task, task->thread_info); - - if (!task || task == current) { - /* Grab rbp right from our regs: */ - asm ("mov %%rbp, %0" : "=r" (stack)); - pr_debug("rbp: %p\n", (void *)stack); - } else { - /* rbp is the last reg pushed by switch_to(): */ - stack = task->thread.rsp; - pr_debug("other task rsp: %p\n", (void *)stack); - stack = (unsigned long)(((unsigned long *)stack)[0]); - pr_debug("other task rbp: %p\n", (void *)stack); - } - - while (1) { - unsigned long stack_end = get_stack_end(task, stack); - - pr_debug("stack: %p\n", (void *)stack); - pr_debug("stack end: %p\n", (void *)stack_end); - - /* - * Invalid stack addres? - */ - if (!stack_end) - return; - /* - * Were we in this stack already? (recursion) - */ - for (i = 0; i < nr_stacks; i++) - if (stacks_done[i] == stack_end) - return; - stacks_done[nr_stacks] = stack_end; - - stack = save_context_stack(trace, skip, stack, stack_end); - if (!all_contexts || !stack || - trace->nr_entries >= trace->max_entries) - return; - trace->entries[trace->nr_entries++] = ULONG_MAX; - if (trace->nr_entries >= trace->max_entries) - return; - if (++nr_stacks >= MAX_STACKS) - return; - } + dump_trace(task, NULL, NULL, &save_stack_ops, trace); + trace->entries[trace->nr_entries++] = ULONG_MAX; } +EXPORT_SYMBOL(save_stack_trace); diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S index 320b6fb00cc..bfbe00763c6 100644 --- a/arch/x86_64/kernel/suspend_asm.S +++ b/arch/x86_64/kernel/suspend_asm.S @@ -54,7 +54,7 @@ ENTRY(restore_image) movq %rcx, %cr3; movq %rax, %cr4; # turn PGE back on - movq pagedir_nosave(%rip), %rdx + movq restore_pblist(%rip), %rdx loop: testq %rdx, %rdx jz done diff --git a/arch/x86_64/kernel/tce.c b/arch/x86_64/kernel/tce.c index 5530dda3f27..cbabfdf78e0 100644 --- a/arch/x86_64/kernel/tce.c +++ b/arch/x86_64/kernel/tce.c @@ -1,4 +1,6 @@ /* + * This file manages the translation entries for the IBM Calgary IOMMU. + * * Derived from arch/powerpc/platforms/pseries/iommu.c * * Copyright (C) IBM Corporation, 2006 @@ -104,14 +106,6 @@ static int tce_table_setparms(struct pci_dev *dev, struct iommu_table *tbl) /* set the tce table size - measured in entries */ tbl->it_size = table_size_to_number_of_entries(specified_table_size); - tbl->it_base = (unsigned long)tce_table_kva[dev->bus->number]; - if (!tbl->it_base) { - printk(KERN_ERR "Calgary: iommu_table_setparms: " - "no table allocated?!\n"); - ret = -ENOMEM; - goto done; - } - /* * number of bytes needed for the bitmap size in number of * entries; we need one bit per entry @@ -160,8 +154,6 @@ int build_tce_table(struct pci_dev *dev, void __iomem *bbar) if (ret) goto free_tbl; - tce_free(tbl, 0, tbl->it_size); - tbl->bbar = bbar; /* diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 7a9b1822418..1c255ee76e7 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -24,6 +24,8 @@ #include <linux/device.h> #include <linux/sysdev.h> #include <linux/bcd.h> +#include <linux/notifier.h> +#include <linux/cpu.h> #include <linux/kallsyms.h> #include <linux/acpi.h> #ifdef CONFIG_ACPI @@ -39,9 +41,7 @@ #include <asm/sections.h> #include <linux/cpufreq.h> #include <linux/hpet.h> -#ifdef CONFIG_X86_LOCAL_APIC #include <asm/apic.h> -#endif #ifdef CONFIG_CPU_FREQ static void cpufreq_delayed_get(void); @@ -49,7 +49,7 @@ static void cpufreq_delayed_get(void); extern void i8254_timer_resume(void); extern int using_apic_timer; -static char *time_init_gtod(void); +static char *timename = NULL; DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); @@ -187,20 +187,15 @@ unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); - /* Assume the lock function has either no stack frame or only a single - word. This checks if the address on the stack looks like a kernel - text address. - There is a small window for false hits, but in that case the tick - is just accounted to the spinlock function. - Better would be to write these functions in assembler again - and check exactly. */ + /* Assume the lock function has either no stack frame or a copy + of eflags from PUSHF + Eflags always has bits 22 and up cleared unlike kernel addresses. */ if (!user_mode(regs) && in_lock_functions(pc)) { - char *v = *(char **)regs->rsp; - if ((v >= _stext && v <= _etext) || - (v >= _sinittext && v <= _einittext) || - (v >= (char *)MODULES_VADDR && v <= (char *)MODULES_END)) - return (unsigned long)v; - return ((unsigned long *)regs->rsp)[1]; + unsigned long *sp = (unsigned long *)regs->rsp; + if (sp[0] >> 22) + return sp[0]; + if (sp[1] >> 22) + return sp[1]; } return pc; } @@ -281,6 +276,7 @@ static void set_rtc_mmss(unsigned long nowtime) * Note: This function is required to return accurate * time even in the absence of multiple timer ticks. */ +static inline unsigned long long cycles_2_ns(unsigned long long cyc); unsigned long long monotonic_clock(void) { unsigned long seq; @@ -305,8 +301,7 @@ unsigned long long monotonic_clock(void) base = monotonic_base; } while (read_seqretry(&xtime_lock, seq)); this_offset = get_cycles_sync(); - /* FIXME: 1000 or 1000000? */ - offset = (this_offset - last_offset)*1000 / cpu_khz; + offset = cycles_2_ns(this_offset - last_offset); } return base + offset; } @@ -410,8 +405,7 @@ void main_timer_handler(struct pt_regs *regs) offset %= USEC_PER_TICK; } - /* FIXME: 1000 or 1000000? */ - monotonic_base += (tsc - vxtime.last_tsc) * 1000000 / cpu_khz; + monotonic_base += cycles_2_ns(tsc - vxtime.last_tsc); vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot; @@ -441,12 +435,8 @@ void main_timer_handler(struct pt_regs *regs) * have to call the local interrupt handler. */ -#ifndef CONFIG_X86_LOCAL_APIC - profile_tick(CPU_PROFILING, regs); -#else if (!using_apic_timer) smp_local_timer_interrupt(regs); -#endif /* * If we have an externally synchronized Linux clock, then update CMOS clock @@ -470,10 +460,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (apic_runs_main_timer > 1) return IRQ_HANDLED; main_timer_handler(regs); -#ifdef CONFIG_X86_LOCAL_APIC if (using_apic_timer) smp_send_timer_broadcast_ipi(); -#endif return IRQ_HANDLED; } @@ -893,11 +881,17 @@ static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL }; -void __init time_init(void) +static int __cpuinit +time_cpu_notifier(struct notifier_block *nb, unsigned long action, void *hcpu) { - char *timename; - char *gtod; + unsigned cpu = (unsigned long) hcpu; + if (action == CPU_ONLINE) + vsyscall_set_cpu(cpu); + return NOTIFY_DONE; +} +void __init time_init(void) +{ if (nohpet) vxtime.hpet_address = 0; @@ -931,18 +925,17 @@ void __init time_init(void) } vxtime.mode = VXTIME_TSC; - gtod = time_init_gtod(); - - printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", - vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod); - printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; vxtime.last_tsc = get_cycles_sync(); + set_cyc2ns_scale(cpu_khz); setup_irq(0, &irq0); + hotcpu_notifier(time_cpu_notifier, 0); + time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id()); - set_cyc2ns_scale(cpu_khz); +#ifndef CONFIG_SMP + time_init_gtod(); +#endif } /* @@ -973,12 +966,18 @@ __cpuinit int unsynchronized_tsc(void) /* * Decide what mode gettimeofday should use. */ -__init static char *time_init_gtod(void) +void time_init_gtod(void) { char *timetype; if (unsynchronized_tsc()) notsc = 1; + + if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) + vgetcpu_mode = VGETCPU_RDTSCP; + else + vgetcpu_mode = VGETCPU_LSL; + if (vxtime.hpet_address && notsc) { timetype = hpet_use_timer ? "HPET" : "PIT/HPET"; if (hpet_use_timer) @@ -1001,7 +1000,16 @@ __init static char *time_init_gtod(void) timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; vxtime.mode = VXTIME_TSC; } - return timetype; + + printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", + vxtime_hz / 1000000, vxtime_hz % 1000000, timename, timetype); + printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", + cpu_khz / 1000, cpu_khz % 1000); + vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; + vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; + vxtime.last_tsc = get_cycles_sync(); + + set_cyc2ns_scale(cpu_khz); } __setup("report_lost_ticks", time_setup); @@ -1031,8 +1039,16 @@ static int timer_resume(struct sys_device *dev) unsigned long flags; unsigned long sec; unsigned long ctime = get_cmos_time(); - unsigned long sleep_length = (ctime - sleep_start) * HZ; + long sleep_length = (ctime - sleep_start) * HZ; + if (sleep_length < 0) { + printk(KERN_WARNING "Time skew detected in timer resume!\n"); + /* The time after the resume must not be earlier than the time + * before the suspend or some nasty things will happen + */ + sleep_length = 0; + ctime = sleep_start; + } if (vxtime.hpet_address) hpet_reenable(); else @@ -1148,23 +1164,25 @@ int hpet_rtc_timer_init(void) hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; local_irq_save(flags); + cnt = hpet_readl(HPET_COUNTER); cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); hpet_writel(cnt, HPET_T1_CMP); hpet_t1_cmp = cnt; - local_irq_restore(flags); cfg = hpet_readl(HPET_T1_CFG); cfg &= ~HPET_TN_PERIODIC; cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; hpet_writel(cfg, HPET_T1_CFG); + local_irq_restore(flags); + return 1; } static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, cnt; + unsigned int cfg, cnt, ticks_per_int, lost_ints; if (unlikely(!(PIE_on | AIE_on | UIE_on))) { cfg = hpet_readl(HPET_T1_CFG); @@ -1179,10 +1197,33 @@ static void hpet_rtc_timer_reinit(void) hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; /* It is more accurate to use the comparator value than current count.*/ - cnt = hpet_t1_cmp; - cnt += hpet_tick*HZ/hpet_rtc_int_freq; - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; + ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; + hpet_t1_cmp += ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + /* + * If the interrupt handler was delayed too long, the write above tries + * to schedule the next interrupt in the past and the hardware would + * not interrupt until the counter had wrapped around. + * So we have to check that the comparator wasn't set to a past time. + */ + cnt = hpet_readl(HPET_COUNTER); + if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { + lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; + /* Make sure that, even with the time needed to execute + * this code, the next scheduled interrupt has been moved + * back to the future: */ + lost_ints++; + + hpet_t1_cmp += lost_ints * ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + if (PIE_on) + PIE_count += lost_ints; + + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); + } } /* diff --git a/arch/x86_64/kernel/trampoline.S b/arch/x86_64/kernel/trampoline.S index 23a03eb91fc..c79b99a9e2f 100644 --- a/arch/x86_64/kernel/trampoline.S +++ b/arch/x86_64/kernel/trampoline.S @@ -64,7 +64,7 @@ idt_48: .word 0, 0 # idt base = 0L gdt_48: - .short __KERNEL32_CS + 7 # gdt limit + .short GDT_ENTRIES*8 - 1 # gdt limit .long cpu_gdt_table-__START_KERNEL_map .globl trampoline_end diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index b1249774d1e..01f2a8d254c 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -45,6 +45,7 @@ #include <asm/pda.h> #include <asm/proto.h> #include <asm/nmi.h> +#include <asm/stacktrace.h> asmlinkage void divide_error(void); asmlinkage void debug(void); @@ -142,7 +143,7 @@ void printk_address(unsigned long address) #endif static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, - unsigned *usedp, const char **idp) + unsigned *usedp, char **idp) { static char ids[][8] = { [DEBUG_STACK - 1] = "#DB", @@ -161,26 +162,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, * 'stack' is in one of them: */ for (k = 0; k < N_EXCEPTION_STACKS; k++) { - unsigned long end; - - /* - * set 'end' to the end of the exception stack. - */ - switch (k + 1) { - /* - * TODO: this block is not needed i think, because - * setup64.c:cpu_init() sets up t->ist[DEBUG_STACK] - * properly too. - */ -#if DEBUG_STKSZ > EXCEPTION_STKSZ - case DEBUG_STACK: - end = cpu_pda(cpu)->debugstack + DEBUG_STKSZ; - break; -#endif - default: - end = per_cpu(orig_ist, cpu).ist[k]; - break; - } + unsigned long end = per_cpu(orig_ist, cpu).ist[k]; /* * Is 'stack' above this exception frame's end? * If yes then skip to the next frame. @@ -234,13 +216,19 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, return NULL; } -static int show_trace_unwind(struct unwind_frame_info *info, void *context) +struct ops_and_data { + struct stacktrace_ops *ops; + void *data; +}; + +static int dump_trace_unwind(struct unwind_frame_info *info, void *context) { + struct ops_and_data *oad = (struct ops_and_data *)context; int n = 0; while (unwind(info) == 0 && UNW_PC(info)) { n++; - printk_address(UNW_PC(info)); + oad->ops->address(oad->data, UNW_PC(info)); if (arch_unw_user_mode(info)) break; } @@ -254,45 +242,53 @@ static int show_trace_unwind(struct unwind_frame_info *info, void *context) * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack */ -void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * stack) +void dump_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * stack, + struct stacktrace_ops *ops, void *data) { - const unsigned cpu = safe_smp_processor_id(); + const unsigned cpu = smp_processor_id(); unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr; unsigned used = 0; - printk("\nCall Trace:\n"); - if (!tsk) tsk = current; if (call_trace >= 0) { int unw_ret = 0; struct unwind_frame_info info; + struct ops_and_data oad = { .ops = ops, .data = data }; if (regs) { if (unwind_init_frame_info(&info, tsk, regs) == 0) - unw_ret = show_trace_unwind(&info, NULL); + unw_ret = dump_trace_unwind(&info, &oad); } else if (tsk == current) - unw_ret = unwind_init_running(&info, show_trace_unwind, NULL); + unw_ret = unwind_init_running(&info, dump_trace_unwind, &oad); else { if (unwind_init_blocked(&info, tsk) == 0) - unw_ret = show_trace_unwind(&info, NULL); + unw_ret = dump_trace_unwind(&info, &oad); } if (unw_ret > 0) { if (call_trace == 1 && !arch_unw_user_mode(&info)) { - print_symbol("DWARF2 unwinder stuck at %s\n", + ops->warning_symbol(data, "DWARF2 unwinder stuck at %s\n", UNW_PC(&info)); if ((long)UNW_SP(&info) < 0) { - printk("Leftover inexact backtrace:\n"); + ops->warning(data, "Leftover inexact backtrace:\n"); stack = (unsigned long *)UNW_SP(&info); + if (!stack) + return; } else - printk("Full inexact backtrace again:\n"); + ops->warning(data, "Full inexact backtrace again:\n"); } else if (call_trace >= 1) return; else - printk("Full inexact backtrace again:\n"); + ops->warning(data, "Full inexact backtrace again:\n"); } else - printk("Inexact backtrace:\n"); + ops->warning(data, "Inexact backtrace:\n"); + } + if (!stack) { + unsigned long dummy; + stack = &dummy; + if (tsk && tsk != current) + stack = (unsigned long *)tsk->thread.rsp; } /* @@ -303,7 +299,9 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s #define HANDLE_STACK(cond) \ do while (cond) { \ unsigned long addr = *stack++; \ - if (kernel_text_address(addr)) { \ + if (oops_in_progress ? \ + __kernel_text_address(addr) : \ + kernel_text_address(addr)) { \ /* \ * If the address is either in the text segment of the \ * kernel, or in the region which contains vmalloc'ed \ @@ -312,7 +310,7 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s * down the cause of the crash will be able to figure \ * out the call path that was taken. \ */ \ - printk_address(addr); \ + ops->address(data, addr); \ } \ } while (0) @@ -321,16 +319,17 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s * current stack address. If the stacks consist of nested * exceptions */ - for ( ; ; ) { - const char *id; + for (;;) { + char *id; unsigned long *estack_end; estack_end = in_exception_stack(cpu, (unsigned long)stack, &used, &id); if (estack_end) { - printk(" <%s>", id); + if (ops->stack(data, id) < 0) + break; HANDLE_STACK (stack < estack_end); - printk(" <EOE>"); + ops->stack(data, "<EOE>"); /* * We link to the next stack via the * second-to-last pointer (index -2 to end) in the @@ -345,7 +344,8 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s (IRQSTACKSIZE - 64) / sizeof(*irqstack); if (stack >= irqstack && stack < irqstack_end) { - printk(" <IRQ>"); + if (ops->stack(data, "IRQ") < 0) + break; HANDLE_STACK (stack < irqstack_end); /* * We link to the next stack (which would be @@ -354,7 +354,7 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s */ stack = (unsigned long *) (irqstack_end[-1]); irqstack_end = NULL; - printk(" <EOI>"); + ops->stack(data, "EOI"); continue; } } @@ -362,19 +362,57 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s } /* - * This prints the process stack: + * This handles the process stack: */ HANDLE_STACK (((long) stack & (THREAD_SIZE-1)) != 0); #undef HANDLE_STACK +} +EXPORT_SYMBOL(dump_trace); + +static void +print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) +{ + print_symbol(msg, symbol); + printk("\n"); +} + +static void print_trace_warning(void *data, char *msg) +{ + printk("%s\n", msg); +} + +static int print_trace_stack(void *data, char *name) +{ + printk(" <%s> ", name); + return 0; +} + +static void print_trace_address(void *data, unsigned long addr) +{ + printk_address(addr); +} + +static struct stacktrace_ops print_trace_ops = { + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, +}; +void +show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack) +{ + printk("\nCall Trace:\n"); + dump_trace(tsk, regs, stack, &print_trace_ops, NULL); printk("\n"); } -static void _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long * rsp) +static void +_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *rsp) { unsigned long *stack; int i; - const int cpu = safe_smp_processor_id(); + const int cpu = smp_processor_id(); unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr); unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); @@ -428,7 +466,7 @@ void show_registers(struct pt_regs *regs) int i; int in_kernel = !user_mode(regs); unsigned long rsp; - const int cpu = safe_smp_processor_id(); + const int cpu = smp_processor_id(); struct task_struct *cur = cpu_pda(cpu)->pcurrent; rsp = regs->rsp; @@ -503,9 +541,11 @@ static unsigned int die_nest_count; unsigned __kprobes long oops_begin(void) { - int cpu = safe_smp_processor_id(); + int cpu = smp_processor_id(); unsigned long flags; + oops_enter(); + /* racy, but better than risking deadlock. */ local_irq_save(flags); if (!spin_trylock(&die_lock)) { @@ -534,6 +574,7 @@ void __kprobes oops_end(unsigned long flags) spin_unlock_irqrestore(&die_lock, flags); if (panic_on_oops) panic("Fatal exception"); + oops_exit(); } void __kprobes __die(const char * str, struct pt_regs * regs, long err) @@ -570,7 +611,7 @@ void die(const char * str, struct pt_regs * regs, long err) do_exit(SIGSEGV); } -void __kprobes die_nmi(char *str, struct pt_regs *regs) +void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) { unsigned long flags = oops_begin(); @@ -578,13 +619,12 @@ void __kprobes die_nmi(char *str, struct pt_regs *regs) * We are in trouble anyway, lets at least try * to get a message out. */ - printk(str, safe_smp_processor_id()); + printk(str, smp_processor_id()); show_registers(regs); if (kexec_should_crash(current)) crash_kexec(regs); - if (panic_on_timeout || panic_on_oops) - panic("nmi watchdog"); - printk("console shuts up ...\n"); + if (do_panic || panic_on_oops) + panic("Non maskable interrupt"); oops_end(flags); nmi_exit(); local_irq_enable(); @@ -730,8 +770,15 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, static __kprobes void mem_parity_error(unsigned char reason, struct pt_regs * regs) { - printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n"); - printk("You probably have a hardware problem with your RAM chips\n"); + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", + reason); + printk(KERN_EMERG "You probably have a hardware problem with your " + "RAM chips\n"); + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); /* Clear and disable the memory parity error line. */ reason = (reason & 0xf) | 4; @@ -754,9 +801,15 @@ io_check_error(unsigned char reason, struct pt_regs * regs) static __kprobes void unknown_nmi_error(unsigned char reason, struct pt_regs * regs) -{ printk("Uhhuh. NMI received for unknown reason %02x.\n", reason); - printk("Dazed and confused, but trying to continue\n"); - printk("Do you have a strange power saving mode enabled?\n"); +{ + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", + reason); + printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); } /* Runs on IST stack. This code must keep interrupts off all the time. @@ -776,17 +829,15 @@ asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs) if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; -#ifdef CONFIG_X86_LOCAL_APIC /* * Ok, so this is none of the documented NMI sources, * so it must be the NMI watchdog. */ - if (nmi_watchdog > 0) { - nmi_watchdog_tick(regs,reason); + if (nmi_watchdog_tick(regs,reason)) return; - } -#endif - unknown_nmi_error(reason, regs); + if (!do_nmi_callback(regs,cpu)) + unknown_nmi_error(reason, regs); + return; } if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) @@ -1071,6 +1122,7 @@ asmlinkage void math_state_restore(void) init_fpu(me); restore_fpu_checking(&me->thread.i387.fxsave); task_thread_info(me)->status |= TS_USEDFPU; + me->fpu_counter++; } void __init trap_init(void) @@ -1109,24 +1161,30 @@ void __init trap_init(void) } -/* Actual parsing is done early in setup.c. */ -static int __init oops_dummy(char *s) +static int __init oops_setup(char *s) { - panic_on_oops = 1; - return 1; + if (!s) + return -EINVAL; + if (!strcmp(s, "panic")) + panic_on_oops = 1; + return 0; } -__setup("oops=", oops_dummy); +early_param("oops", oops_setup); static int __init kstack_setup(char *s) { + if (!s) + return -EINVAL; kstack_depth_to_print = simple_strtoul(s,NULL,0); - return 1; + return 0; } -__setup("kstack=", kstack_setup); +early_param("kstack", kstack_setup); #ifdef CONFIG_STACK_UNWIND static int __init call_trace_setup(char *s) { + if (!s) + return -EINVAL; if (strcmp(s, "old") == 0) call_trace = -1; else if (strcmp(s, "both") == 0) @@ -1135,7 +1193,7 @@ static int __init call_trace_setup(char *s) call_trace = 1; else if (strcmp(s, "new") == 0) call_trace = 2; - return 1; + return 0; } -__setup("call_trace=", call_trace_setup); +early_param("call_trace", call_trace_setup); #endif diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 7c4de31471d..d0564f1bcb0 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -13,6 +13,12 @@ OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") OUTPUT_ARCH(i386:x86-64) ENTRY(phys_startup_64) jiffies_64 = jiffies; +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + user PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(4); /* R__ */ +} SECTIONS { . = __START_KERNEL; @@ -31,7 +37,7 @@ SECTIONS KPROBES_TEXT *(.fixup) *(.gnu.warning) - } = 0x9090 + } :text = 0x9090 /* out-of-line lock text */ .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) } @@ -57,7 +63,7 @@ SECTIONS .data : AT(ADDR(.data) - LOAD_OFFSET) { *(.data) CONSTRUCTORS - } + } :data _edata = .; /* End of data section */ @@ -89,7 +95,7 @@ SECTIONS #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) . = VSYSCALL_ADDR; - .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } + .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user __vsyscall_0 = VSYSCALL_VIRT_ADDR; . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); @@ -99,6 +105,9 @@ SECTIONS .vxtime : AT(VLOAD(.vxtime)) { *(.vxtime) } vxtime = VVIRT(.vxtime); + .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } + vgetcpu_mode = VVIRT(.vgetcpu_mode); + .wall_jiffies : AT(VLOAD(.wall_jiffies)) { *(.wall_jiffies) } wall_jiffies = VVIRT(.wall_jiffies); @@ -132,7 +141,7 @@ SECTIONS . = ALIGN(8192); /* init_task */ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { *(.data.init_task) - } + } :data . = ALIGN(4096); .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { @@ -207,14 +216,12 @@ SECTIONS __initramfs_start = .; .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; - /* temporary here to work around NR_CPUS. If you see this comment in 2.6.17+ - complain */ - . = ALIGN(4096); - __init_end = .; - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); __per_cpu_start = .; .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } __per_cpu_end = .; + . = ALIGN(4096); + __init_end = .; . = ALIGN(4096); __nosave_begin = .; diff --git a/arch/x86_64/kernel/vsmp.c b/arch/x86_64/kernel/vsmp.c index 92f70c74965..044e852bd25 100644 --- a/arch/x86_64/kernel/vsmp.c +++ b/arch/x86_64/kernel/vsmp.c @@ -20,6 +20,9 @@ static int __init vsmp_init(void) void *address; unsigned int cap, ctl; + if (!early_pci_allowed()) + return 0; + /* Check if we are running on a ScaleMP vSMP box */ if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) || (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL)) diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index f603037df16..ac48c3857dd 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -26,6 +26,7 @@ #include <linux/seqlock.h> #include <linux/jiffies.h> #include <linux/sysctl.h> +#include <linux/getcpu.h> #include <asm/vsyscall.h> #include <asm/pgtable.h> @@ -33,11 +34,15 @@ #include <asm/fixmap.h> #include <asm/errno.h> #include <asm/io.h> +#include <asm/segment.h> +#include <asm/desc.h> +#include <asm/topology.h> #define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) int __sysctl_vsyscall __section_sysctl_vsyscall = 1; seqlock_t __xtime_lock __section_xtime_lock = SEQLOCK_UNLOCKED; +int __vgetcpu_mode __section_vgetcpu_mode; #include <asm/unistd.h> @@ -72,7 +77,8 @@ static __always_inline void do_vgettimeofday(struct timeval * tv) __vxtime.tsc_quot) >> 32; /* See comment in x86_64 do_gettimeofday. */ } else { - usec += ((readl((void *)fix_to_virt(VSYSCALL_HPET) + 0xf0) - + usec += ((readl((void __iomem *) + fix_to_virt(VSYSCALL_HPET) + 0xf0) - __vxtime.last) * __vxtime.quot) >> 32; } } while (read_seqretry(&__xtime_lock, sequence)); @@ -127,9 +133,46 @@ time_t __vsyscall(1) vtime(time_t *t) return __xtime.tv_sec; } -long __vsyscall(2) venosys_0(void) +/* Fast way to get current CPU and node. + This helps to do per node and per CPU caches in user space. + The result is not guaranteed without CPU affinity, but usually + works out because the scheduler tries to keep a thread on the same + CPU. + + tcache must point to a two element sized long array. + All arguments can be NULL. */ +long __vsyscall(2) +vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) { - return -ENOSYS; + unsigned int dummy, p; + unsigned long j = 0; + + /* Fast cache - only recompute value once per jiffies and avoid + relatively costly rdtscp/cpuid otherwise. + This works because the scheduler usually keeps the process + on the same CPU and this syscall doesn't guarantee its + results anyways. + We do this here because otherwise user space would do it on + its own in a likely inferior way (no access to jiffies). + If you don't like it pass NULL. */ + if (tcache && tcache->t0 == (j = __jiffies)) { + p = tcache->t1; + } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { + /* Load per CPU data from RDTSCP */ + rdtscp(dummy, dummy, p); + } else { + /* Load per CPU data from GDT */ + asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG)); + } + if (tcache) { + tcache->t0 = j; + tcache->t1 = p; + } + if (cpu) + *cpu = p & 0xfff; + if (node) + *node = p >> 12; + return 0; } long __vsyscall(3) venosys_1(void) @@ -149,7 +192,8 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos) { extern u16 vsysc1, vsysc2; - u16 *map1, *map2; + u16 __iomem *map1; + u16 __iomem *map2; int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos); if (!write) return ret; @@ -164,11 +208,11 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, goto out; } if (!sysctl_vsyscall) { - *map1 = SYSCALL; - *map2 = SYSCALL; + writew(SYSCALL, map1); + writew(SYSCALL, map2); } else { - *map1 = NOP2; - *map2 = NOP2; + writew(NOP2, map1); + writew(NOP2, map2); } iounmap(map2); out: @@ -200,6 +244,43 @@ static ctl_table kernel_root_table2[] = { #endif +static void __cpuinit write_rdtscp_cb(void *info) +{ + write_rdtscp_aux((unsigned long)info); +} + +void __cpuinit vsyscall_set_cpu(int cpu) +{ + unsigned long *d; + unsigned long node = 0; +#ifdef CONFIG_NUMA + node = cpu_to_node[cpu]; +#endif + if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) { + void *info = (void *)((node << 12) | cpu); + /* Can happen on preemptive kernel */ + if (get_cpu() == cpu) + write_rdtscp_cb(info); +#ifdef CONFIG_SMP + else { + /* the notifier is unfortunately not executed on the + target CPU */ + smp_call_function_single(cpu,write_rdtscp_cb,info,0,1); + } +#endif + put_cpu(); + } + + /* Store cpu number in limit so that it can be loaded quickly + in user space in vgetcpu. + 12 bits for the CPU and 8 bits for the node. */ + d = (unsigned long *)(cpu_gdt(cpu) + GDT_ENTRY_PER_CPU); + *d = 0x0f40000000000ULL; + *d |= cpu; + *d |= (node & 0xf) << 12; + *d |= (node >> 4) << 48; +} + static void __init map_vsyscall(void) { extern char __vsyscall_0; @@ -214,6 +295,7 @@ static int __init vsyscall_init(void) VSYSCALL_ADDR(__NR_vgettimeofday))); BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime)); BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE))); + BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu)); map_vsyscall(); #ifdef CONFIG_SYSCTL register_sysctl_table(kernel_root_table2, 0); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 370952c4ff2..c3454af5e3a 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -29,6 +29,7 @@ EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(copy_user_generic); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_to_user); +EXPORT_SYMBOL(__copy_from_user_inatomic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile index ccef6ae747a..b78d4170fce 100644 --- a/arch/x86_64/lib/Makefile +++ b/arch/x86_64/lib/Makefile @@ -9,4 +9,4 @@ obj-y := io.o iomap_copy.o lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \ usercopy.o getuser.o putuser.o \ thunk.o clear_page.o copy_page.o bitstr.o bitops.o -lib-y += memcpy.o memmove.o memset.o copy_user.o +lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S index 1f81b79b796..9a10a78bb4a 100644 --- a/arch/x86_64/lib/clear_page.S +++ b/arch/x86_64/lib/clear_page.S @@ -1,10 +1,22 @@ +#include <linux/linkage.h> +#include <asm/dwarf2.h> + /* * Zero a page. * rdi page */ - .globl clear_page - .p2align 4 -clear_page: + ALIGN +clear_page_c: + CFI_STARTPROC + movl $4096/8,%ecx + xorl %eax,%eax + rep stosq + ret + CFI_ENDPROC +ENDPROC(clear_page) + +ENTRY(clear_page) + CFI_STARTPROC xorl %eax,%eax movl $4096/64,%ecx .p2align 4 @@ -23,28 +35,25 @@ clear_page: jnz .Lloop nop ret -clear_page_end: + CFI_ENDPROC +.Lclear_page_end: +ENDPROC(clear_page) /* Some CPUs run faster using the string instructions. It is also a lot simpler. Use this when possible */ #include <asm/cpufeature.h> + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad clear_page - .quad clear_page_c - .byte X86_FEATURE_REP_GOOD - .byte clear_page_end-clear_page - .byte clear_page_c_end-clear_page_c - .previous - - .section .altinstr_replacement,"ax" -clear_page_c: - movl $4096/8,%ecx - xorl %eax,%eax - rep - stosq - ret -clear_page_c_end: + .quad clear_page + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lclear_page_end - clear_page + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S index 8fa19d96a7e..0ebb03b60e7 100644 --- a/arch/x86_64/lib/copy_page.S +++ b/arch/x86_64/lib/copy_page.S @@ -1,17 +1,33 @@ /* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */ +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> + + ALIGN +copy_page_c: + CFI_STARTPROC + movl $4096/8,%ecx + rep movsq + ret + CFI_ENDPROC +ENDPROC(copy_page_c) + /* Don't use streaming store because it's better when the target ends up in cache. */ /* Could vary the prefetch distance based on SMP/UP */ - .globl copy_page - .p2align 4 -copy_page: +ENTRY(copy_page) + CFI_STARTPROC subq $3*8,%rsp + CFI_ADJUST_CFA_OFFSET 3*8 movq %rbx,(%rsp) + CFI_REL_OFFSET rbx, 0 movq %r12,1*8(%rsp) + CFI_REL_OFFSET r12, 1*8 movq %r13,2*8(%rsp) + CFI_REL_OFFSET r13, 2*8 movl $(4096/64)-5,%ecx .p2align 4 @@ -72,30 +88,33 @@ copy_page: jnz .Loop2 movq (%rsp),%rbx + CFI_RESTORE rbx movq 1*8(%rsp),%r12 + CFI_RESTORE r12 movq 2*8(%rsp),%r13 + CFI_RESTORE r13 addq $3*8,%rsp + CFI_ADJUST_CFA_OFFSET -3*8 ret +.Lcopy_page_end: + CFI_ENDPROC +ENDPROC(copy_page) /* Some CPUs run faster using the string copy instructions. It is also a lot simpler. Use this when possible */ #include <asm/cpufeature.h> + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad copy_page - .quad copy_page_c - .byte X86_FEATURE_REP_GOOD - .byte copy_page_c_end-copy_page_c - .byte copy_page_c_end-copy_page_c - .previous - - .section .altinstr_replacement,"ax" -copy_page_c: - movl $4096/8,%ecx - rep - movsq - ret -copy_page_c_end: + .quad copy_page + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lcopy_page_end - copy_page + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/copy_user.S b/arch/x86_64/lib/copy_user.S index f64569b83b5..70bebd31040 100644 --- a/arch/x86_64/lib/copy_user.S +++ b/arch/x86_64/lib/copy_user.S @@ -4,56 +4,78 @@ * Functions to copy from and to user space. */ +#include <linux/linkage.h> +#include <asm/dwarf2.h> + #define FIX_ALIGNMENT 1 - #include <asm/current.h> - #include <asm/asm-offsets.h> - #include <asm/thread_info.h> - #include <asm/cpufeature.h> +#include <asm/current.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/cpufeature.h> -/* Standard copy_to_user with segment limit checking */ - .globl copy_to_user - .p2align 4 -copy_to_user: - GET_THREAD_INFO(%rax) - movq %rdi,%rcx - addq %rdx,%rcx - jc bad_to_user - cmpq threadinfo_addr_limit(%rax),%rcx - jae bad_to_user -2: + .macro ALTERNATIVE_JUMP feature,orig,alt +0: .byte 0xe9 /* 32bit jump */ - .long .Lcug-1f + .long \orig-1f /* by default jump to orig */ 1: - .section .altinstr_replacement,"ax" -3: .byte 0xe9 /* replacement jmp with 8 bit immediate */ - .long copy_user_generic_c-1b /* offset */ +2: .byte 0xe9 /* near jump with 32bit immediate */ + .long \alt-1b /* offset */ /* or alternatively to alt */ .previous .section .altinstructions,"a" .align 8 + .quad 0b .quad 2b - .quad 3b - .byte X86_FEATURE_REP_GOOD + .byte \feature /* when feature is set */ .byte 5 .byte 5 .previous + .endm + +/* Standard copy_to_user with segment limit checking */ +ENTRY(copy_to_user) + CFI_STARTPROC + GET_THREAD_INFO(%rax) + movq %rdi,%rcx + addq %rdx,%rcx + jc bad_to_user + cmpq threadinfo_addr_limit(%rax),%rcx + jae bad_to_user + xorl %eax,%eax /* clear zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC + +ENTRY(copy_user_generic) + CFI_STARTPROC + movl $1,%ecx /* set zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC + +ENTRY(__copy_from_user_inatomic) + CFI_STARTPROC + xorl %ecx,%ecx /* clear zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC /* Standard copy_from_user with segment limit checking */ - .globl copy_from_user - .p2align 4 -copy_from_user: +ENTRY(copy_from_user) + CFI_STARTPROC GET_THREAD_INFO(%rax) movq %rsi,%rcx addq %rdx,%rcx jc bad_from_user cmpq threadinfo_addr_limit(%rax),%rcx jae bad_from_user - /* FALL THROUGH to copy_user_generic */ + movl $1,%ecx /* set zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC +ENDPROC(copy_from_user) .section .fixup,"ax" /* must zero dest */ bad_from_user: + CFI_STARTPROC movl %edx,%ecx xorl %eax,%eax rep @@ -61,40 +83,32 @@ bad_from_user: bad_to_user: movl %edx,%eax ret + CFI_ENDPROC +END(bad_from_user) .previous /* - * copy_user_generic - memory copy with exception handling. + * copy_user_generic_unrolled - memory copy with exception handling. + * This version is for CPUs like P4 that don't have efficient micro code for rep movsq * * Input: * rdi destination * rsi source * rdx count + * ecx zero flag -- if true zero destination on error * * Output: * eax uncopied bytes or 0 if successful. */ - .globl copy_user_generic - .p2align 4 -copy_user_generic: - .byte 0x66,0x66,0x90 /* 5 byte nop for replacement jump */ - .byte 0x66,0x90 -1: - .section .altinstr_replacement,"ax" -2: .byte 0xe9 /* near jump with 32bit immediate */ - .long copy_user_generic_c-1b /* offset */ - .previous - .section .altinstructions,"a" - .align 8 - .quad copy_user_generic - .quad 2b - .byte X86_FEATURE_REP_GOOD - .byte 5 - .byte 5 - .previous -.Lcug: +ENTRY(copy_user_generic_unrolled) + CFI_STARTPROC pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 + pushq %rcx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rcx, 0 xorl %eax,%eax /*zero for the exception handler */ #ifdef FIX_ALIGNMENT @@ -168,9 +182,16 @@ copy_user_generic: decl %ecx jnz .Lloop_1 + CFI_REMEMBER_STATE .Lende: + popq %rcx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rcx popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx ret + CFI_RESTORE_STATE #ifdef FIX_ALIGNMENT /* align destination */ @@ -252,6 +273,8 @@ copy_user_generic: addl %ecx,%edx /* edx: bytes to zero, rdi: dest, eax:zero */ .Lzero_rest: + cmpl $0,(%rsp) + jz .Le_zero movq %rdx,%rcx .Le_byte: xorl %eax,%eax @@ -261,6 +284,9 @@ copy_user_generic: .Le_zero: movq %rdx,%rax jmp .Lende + CFI_ENDPROC +ENDPROC(copy_user_generic) + /* Some CPUs run faster using the string copy instructions. This is also a lot simpler. Use them when possible. @@ -270,6 +296,7 @@ copy_user_generic: /* rdi destination * rsi source * rdx count + * ecx zero flag * * Output: * eax uncopied bytes or 0 if successfull. @@ -280,22 +307,48 @@ copy_user_generic: * And more would be dangerous because both Intel and AMD have * errata with rep movsq > 4GB. If someone feels the need to fix * this please consider this. - */ -copy_user_generic_c: + */ +ENTRY(copy_user_generic_string) + CFI_STARTPROC + movl %ecx,%r8d /* save zero flag */ movl %edx,%ecx shrl $3,%ecx andl $7,%edx + jz 10f 1: rep movsq movl %edx,%ecx 2: rep movsb -4: movl %ecx,%eax +9: movl %ecx,%eax ret -3: lea (%rdx,%rcx,8),%rax + + /* multiple of 8 byte */ +10: rep + movsq + xor %eax,%eax ret + /* exception handling */ +3: lea (%rdx,%rcx,8),%rax /* exception on quad loop */ + jmp 6f +5: movl %ecx,%eax /* exception on byte loop */ + /* eax: left over bytes */ +6: testl %r8d,%r8d /* zero flag set? */ + jz 7f + movl %eax,%ecx /* initialize x86 loop counter */ + push %rax + xorl %eax,%eax +8: rep + stosb /* zero the rest */ +11: pop %rax +7: ret + CFI_ENDPROC +END(copy_user_generic_c) + .section __ex_table,"a" .quad 1b,3b - .quad 2b,4b + .quad 2b,5b + .quad 8b,11b + .quad 10b,3b .previous diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86_64/lib/csum-copy.S index 72fd55ee896..f0dba36578e 100644 --- a/arch/x86_64/lib/csum-copy.S +++ b/arch/x86_64/lib/csum-copy.S @@ -5,8 +5,9 @@ * License. See the file COPYING in the main directory of this archive * for more details. No warranty for anything given at all. */ - #include <linux/linkage.h> - #include <asm/errno.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> +#include <asm/errno.h> /* * Checksum copy with exception handling. @@ -53,19 +54,24 @@ .endm - .globl csum_partial_copy_generic - .p2align 4 -csum_partial_copy_generic: +ENTRY(csum_partial_copy_generic) + CFI_STARTPROC cmpl $3*64,%edx jle .Lignore .Lignore: subq $7*8,%rsp + CFI_ADJUST_CFA_OFFSET 7*8 movq %rbx,2*8(%rsp) + CFI_REL_OFFSET rbx, 2*8 movq %r12,3*8(%rsp) + CFI_REL_OFFSET r12, 3*8 movq %r14,4*8(%rsp) + CFI_REL_OFFSET r14, 4*8 movq %r13,5*8(%rsp) + CFI_REL_OFFSET r13, 5*8 movq %rbp,6*8(%rsp) + CFI_REL_OFFSET rbp, 6*8 movq %r8,(%rsp) movq %r9,1*8(%rsp) @@ -208,14 +214,22 @@ csum_partial_copy_generic: addl %ebx,%eax adcl %r9d,%eax /* carry */ + CFI_REMEMBER_STATE .Lende: movq 2*8(%rsp),%rbx + CFI_RESTORE rbx movq 3*8(%rsp),%r12 + CFI_RESTORE r12 movq 4*8(%rsp),%r14 + CFI_RESTORE r14 movq 5*8(%rsp),%r13 + CFI_RESTORE r13 movq 6*8(%rsp),%rbp + CFI_RESTORE rbp addq $7*8,%rsp + CFI_ADJUST_CFA_OFFSET -7*8 ret + CFI_RESTORE_STATE /* Exception handlers. Very simple, zeroing is done in the wrappers */ .Lbad_source: @@ -231,3 +245,5 @@ csum_partial_copy_generic: jz .Lende movl $-EFAULT,(%rax) jmp .Lende + CFI_ENDPROC +ENDPROC(csum_partial_copy_generic) diff --git a/arch/x86_64/lib/getuser.S b/arch/x86_64/lib/getuser.S index 3844d5e885a..5448876261f 100644 --- a/arch/x86_64/lib/getuser.S +++ b/arch/x86_64/lib/getuser.S @@ -27,25 +27,26 @@ */ #include <linux/linkage.h> +#include <asm/dwarf2.h> #include <asm/page.h> #include <asm/errno.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> .text - .p2align 4 -.globl __get_user_1 -__get_user_1: +ENTRY(__get_user_1) + CFI_STARTPROC GET_THREAD_INFO(%r8) cmpq threadinfo_addr_limit(%r8),%rcx jae bad_get_user 1: movzb (%rcx),%edx xorl %eax,%eax ret + CFI_ENDPROC +ENDPROC(__get_user_1) - .p2align 4 -.globl __get_user_2 -__get_user_2: +ENTRY(__get_user_2) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $1,%rcx jc 20f @@ -57,10 +58,11 @@ __get_user_2: ret 20: decq %rcx jmp bad_get_user + CFI_ENDPROC +ENDPROC(__get_user_2) - .p2align 4 -.globl __get_user_4 -__get_user_4: +ENTRY(__get_user_4) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $3,%rcx jc 30f @@ -72,10 +74,11 @@ __get_user_4: ret 30: subq $3,%rcx jmp bad_get_user + CFI_ENDPROC +ENDPROC(__get_user_4) - .p2align 4 -.globl __get_user_8 -__get_user_8: +ENTRY(__get_user_8) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $7,%rcx jc 40f @@ -87,11 +90,16 @@ __get_user_8: ret 40: subq $7,%rcx jmp bad_get_user + CFI_ENDPROC +ENDPROC(__get_user_8) bad_get_user: + CFI_STARTPROC xorl %edx,%edx movq $(-EFAULT),%rax ret + CFI_ENDPROC +END(bad_get_user) .section __ex_table,"a" .quad 1b,bad_get_user diff --git a/arch/x86_64/lib/iomap_copy.S b/arch/x86_64/lib/iomap_copy.S index 8bbade5fea0..05a95e713da 100644 --- a/arch/x86_64/lib/iomap_copy.S +++ b/arch/x86_64/lib/iomap_copy.S @@ -15,12 +15,16 @@ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */ +#include <linux/linkage.h> +#include <asm/dwarf2.h> + /* * override generic version in lib/iomap_copy.c */ - .globl __iowrite32_copy - .p2align 4 -__iowrite32_copy: +ENTRY(__iowrite32_copy) + CFI_STARTPROC movl %edx,%ecx rep movsd ret + CFI_ENDPROC +ENDPROC(__iowrite32_copy) diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S index 5554948b555..967b22fa7d0 100644 --- a/arch/x86_64/lib/memcpy.S +++ b/arch/x86_64/lib/memcpy.S @@ -1,6 +1,10 @@ /* Copyright 2002 Andi Kleen */ - #include <asm/cpufeature.h> +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> +#include <asm/cpufeature.h> + /* * memcpy - Copy a memory block. * @@ -13,12 +17,26 @@ * rax original destination */ - .globl __memcpy - .globl memcpy - .p2align 4 -__memcpy: -memcpy: + ALIGN +memcpy_c: + CFI_STARTPROC + movq %rdi,%rax + movl %edx,%ecx + shrl $3,%ecx + andl $7,%edx + rep movsq + movl %edx,%ecx + rep movsb + ret + CFI_ENDPROC +ENDPROC(memcpy_c) + +ENTRY(__memcpy) +ENTRY(memcpy) + CFI_STARTPROC pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 movq %rdi,%rax movl %edx,%ecx @@ -86,36 +104,27 @@ memcpy: .Lende: popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx ret .Lfinal: + CFI_ENDPROC +ENDPROC(memcpy) +ENDPROC(__memcpy) /* Some CPUs run faster using the string copy instructions. It is also a lot simpler. Use this when possible */ + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad memcpy - .quad memcpy_c - .byte X86_FEATURE_REP_GOOD - .byte .Lfinal-memcpy - .byte memcpy_c_end-memcpy_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi source - * rdx count - */ -memcpy_c: - movq %rdi,%rax - movl %edx,%ecx - shrl $3,%ecx - andl $7,%edx - rep - movsq - movl %edx,%ecx - rep - movsb - ret -memcpy_c_end: + .quad memcpy + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lfinal - memcpy + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S index ad397f2c7de..09ed1f6b0ea 100644 --- a/arch/x86_64/lib/memset.S +++ b/arch/x86_64/lib/memset.S @@ -1,4 +1,9 @@ /* Copyright 2002 Andi Kleen, SuSE Labs */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> + /* * ISO C memset - set a memory block to a byte value. * @@ -8,11 +13,29 @@ * * rax original destination */ - .globl __memset - .globl memset - .p2align 4 -memset: -__memset: + ALIGN +memset_c: + CFI_STARTPROC + movq %rdi,%r9 + movl %edx,%r8d + andl $7,%r8d + movl %edx,%ecx + shrl $3,%ecx + /* expand byte value */ + movzbl %sil,%esi + movabs $0x0101010101010101,%rax + mulq %rsi /* with rax, clobbers rdx */ + rep stosq + movl %r8d,%ecx + rep stosb + movq %r9,%rax + ret + CFI_ENDPROC +ENDPROC(memset_c) + +ENTRY(memset) +ENTRY(__memset) + CFI_STARTPROC movq %rdi,%r10 movq %rdx,%r11 @@ -25,6 +48,7 @@ __memset: movl %edi,%r9d andl $7,%r9d jnz .Lbad_alignment + CFI_REMEMBER_STATE .Lafter_bad_alignment: movl %r11d,%ecx @@ -75,6 +99,7 @@ __memset: movq %r10,%rax ret + CFI_RESTORE_STATE .Lbad_alignment: cmpq $7,%r11 jbe .Lhandle_7 @@ -84,42 +109,26 @@ __memset: addq %r8,%rdi subq %r8,%r11 jmp .Lafter_bad_alignment +.Lfinal: + CFI_ENDPROC +ENDPROC(memset) +ENDPROC(__memset) /* Some CPUs run faster using the string instructions. It is also a lot simpler. Use this when possible */ #include <asm/cpufeature.h> + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (memset_c - memset) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad memset - .quad memset_c - .byte X86_FEATURE_REP_GOOD - .byte memset_c_end-memset_c - .byte memset_c_end-memset_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi value - * rdx count - */ -memset_c: - movq %rdi,%r9 - movl %edx,%r8d - andl $7,%r8d - movl %edx,%ecx - shrl $3,%ecx - /* expand byte value */ - movzbl %sil,%esi - movabs $0x0101010101010101,%rax - mulq %rsi /* with rax, clobbers rdx */ - rep - stosq - movl %r8d,%ecx - rep - stosb - movq %r9,%rax - ret -memset_c_end: + .quad memset + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lfinal - memset + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/putuser.S b/arch/x86_64/lib/putuser.S index 7f5593974e2..4989f5a8fa9 100644 --- a/arch/x86_64/lib/putuser.S +++ b/arch/x86_64/lib/putuser.S @@ -25,25 +25,26 @@ */ #include <linux/linkage.h> +#include <asm/dwarf2.h> #include <asm/page.h> #include <asm/errno.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> .text - .p2align 4 -.globl __put_user_1 -__put_user_1: +ENTRY(__put_user_1) + CFI_STARTPROC GET_THREAD_INFO(%r8) cmpq threadinfo_addr_limit(%r8),%rcx jae bad_put_user 1: movb %dl,(%rcx) xorl %eax,%eax ret + CFI_ENDPROC +ENDPROC(__put_user_1) - .p2align 4 -.globl __put_user_2 -__put_user_2: +ENTRY(__put_user_2) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $1,%rcx jc 20f @@ -55,10 +56,11 @@ __put_user_2: ret 20: decq %rcx jmp bad_put_user + CFI_ENDPROC +ENDPROC(__put_user_2) - .p2align 4 -.globl __put_user_4 -__put_user_4: +ENTRY(__put_user_4) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $3,%rcx jc 30f @@ -70,10 +72,11 @@ __put_user_4: ret 30: subq $3,%rcx jmp bad_put_user + CFI_ENDPROC +ENDPROC(__put_user_4) - .p2align 4 -.globl __put_user_8 -__put_user_8: +ENTRY(__put_user_8) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $7,%rcx jc 40f @@ -85,10 +88,15 @@ __put_user_8: ret 40: subq $7,%rcx jmp bad_put_user + CFI_ENDPROC +ENDPROC(__put_user_8) bad_put_user: + CFI_STARTPROC movq $(-EFAULT),%rax ret + CFI_ENDPROC +END(bad_put_user) .section __ex_table,"a" .quad 1b,bad_put_user diff --git a/arch/x86_64/lib/rwlock.S b/arch/x86_64/lib/rwlock.S new file mode 100644 index 00000000000..0cde1f80731 --- /dev/null +++ b/arch/x86_64/lib/rwlock.S @@ -0,0 +1,38 @@ +/* Slow paths of read/write spinlocks. */ + +#include <linux/linkage.h> +#include <asm/rwlock.h> +#include <asm/alternative-asm.i> +#include <asm/dwarf2.h> + +/* rdi: pointer to rwlock_t */ +ENTRY(__write_lock_failed) + CFI_STARTPROC + LOCK_PREFIX + addl $RW_LOCK_BIAS,(%rdi) +1: rep + nop + cmpl $RW_LOCK_BIAS,(%rdi) + jne 1b + LOCK_PREFIX + subl $RW_LOCK_BIAS,(%rdi) + jnz __write_lock_failed + ret + CFI_ENDPROC +END(__write_lock_failed) + +/* rdi: pointer to rwlock_t */ +ENTRY(__read_lock_failed) + CFI_STARTPROC + LOCK_PREFIX + incl (%rdi) +1: rep + nop + cmpl $1,(%rdi) + js 1b + LOCK_PREFIX + decl (%rdi) + js __read_lock_failed + ret + CFI_ENDPROC +END(__read_lock_failed) diff --git a/arch/x86_64/lib/thunk.S b/arch/x86_64/lib/thunk.S index 332ea5dff91..0025535cac8 100644 --- a/arch/x86_64/lib/thunk.S +++ b/arch/x86_64/lib/thunk.S @@ -1,10 +1,9 @@ - /* - * Save registers before calling assembly functions. This avoids - * disturbance of register allocation in some inline assembly constructs. - * Copyright 2001,2002 by Andi Kleen, SuSE Labs. - * Subject to the GNU public license, v.2. No warranty of any kind. - * $Id: thunk.S,v 1.2 2002/03/13 20:06:58 ak Exp $ - */ +/* + * Save registers before calling assembly functions. This avoids + * disturbance of register allocation in some inline assembly constructs. + * Copyright 2001,2002 by Andi Kleen, SuSE Labs. + * Subject to the GNU public license, v.2. No warranty of any kind. + */ #include <linux/config.h> #include <linux/linkage.h> @@ -67,33 +66,3 @@ restore_norax: RESTORE_ARGS 1 ret CFI_ENDPROC - -#ifdef CONFIG_SMP -/* Support for read/write spinlocks. */ - .text -/* rax: pointer to rwlock_t */ -ENTRY(__write_lock_failed) - lock - addl $RW_LOCK_BIAS,(%rax) -1: rep - nop - cmpl $RW_LOCK_BIAS,(%rax) - jne 1b - lock - subl $RW_LOCK_BIAS,(%rax) - jnz __write_lock_failed - ret - -/* rax: pointer to rwlock_t */ -ENTRY(__read_lock_failed) - lock - incl (%rax) -1: rep - nop - cmpl $1,(%rax) - js 1b - lock - decl (%rax) - js __read_lock_failed - ret -#endif diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index ac8ea66ccb9..1a17b0733ab 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -40,8 +40,7 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) -#ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); +static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); /* Hook to register for page fault notifications */ int register_page_fault_notifier(struct notifier_block *nb) @@ -49,11 +48,13 @@ int register_page_fault_notifier(struct notifier_block *nb) vmalloc_sync_all(); return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); } +EXPORT_SYMBOL_GPL(register_page_fault_notifier); int unregister_page_fault_notifier(struct notifier_block *nb) { return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); } +EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); static inline int notify_page_fault(enum die_val val, const char *str, struct pt_regs *regs, long err, int trap, int sig) @@ -67,13 +68,6 @@ static inline int notify_page_fault(enum die_val val, const char *str, }; return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); } -#else -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) -{ - return NOTIFY_DONE; -} -#endif void bust_spinlocks(int yes) { @@ -102,7 +96,7 @@ void bust_spinlocks(int yes) static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, unsigned long error_code) { - unsigned char *instr; + unsigned char __user *instr; int scan_more = 1; int prefetch = 0; unsigned char *max_instr; @@ -111,7 +105,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, if (error_code & PF_INSTR) return 0; - instr = (unsigned char *)convert_rip_to_linear(current, regs); + instr = (unsigned char __user *)convert_rip_to_linear(current, regs); max_instr = instr + 15; if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE) @@ -122,7 +116,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, unsigned char instr_hi; unsigned char instr_lo; - if (__get_user(opcode, instr)) + if (__get_user(opcode, (char __user *)instr)) break; instr_hi = opcode & 0xf0; @@ -160,7 +154,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, case 0x00: /* Prefetch instruction is 0x0F0D or 0x0F18 */ scan_more = 0; - if (__get_user(opcode, instr)) + if (__get_user(opcode, (char __user *)instr)) break; prefetch = (instr_lo == 0xF) && (opcode == 0x0D || opcode == 0x18); @@ -176,7 +170,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, static int bad_address(void *p) { unsigned long dummy; - return __get_user(dummy, (unsigned long *)p); + return __get_user(dummy, (unsigned long __user *)p); } void dump_pagetable(unsigned long address) @@ -299,7 +293,7 @@ static int vmalloc_fault(unsigned long address) if (pgd_none(*pgd)) set_pgd(pgd, *pgd_ref); else - BUG_ON(pgd_page(*pgd) != pgd_page(*pgd_ref)); + BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); /* Below here mismatches are bugs because these lower tables are shared */ @@ -308,7 +302,7 @@ static int vmalloc_fault(unsigned long address) pud_ref = pud_offset(pgd_ref, address); if (pud_none(*pud_ref)) return -1; - if (pud_none(*pud) || pud_page(*pud) != pud_page(*pud_ref)) + if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref)) BUG(); pmd = pmd_offset(pud, address); pmd_ref = pmd_offset(pud_ref, address); @@ -641,7 +635,7 @@ void vmalloc_sync_all(void) if (pgd_none(*pgd)) set_pgd(pgd, *pgd_ref); else - BUG_ON(pgd_page(*pgd) != pgd_page(*pgd_ref)); + BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); } spin_unlock(&pgd_lock); set_bit(pgd_index(address), insync); diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index d14fb2dfbfc..3e16fe08150 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -229,7 +229,6 @@ __init void *early_ioremap(unsigned long addr, unsigned long size) /* actually usually some more */ if (size >= LARGE_PAGE_SIZE) { - printk("SMBIOS area too long %lu\n", size); return NULL; } set_pmd(temp_mappings[0].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE)); @@ -250,12 +249,13 @@ __init void early_iounmap(void *addr, unsigned long size) } static void __meminit -phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) +phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end) { - int i; + int i = pmd_index(address); - for (i = 0; i < PTRS_PER_PMD; pmd++, i++, address += PMD_SIZE) { + for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) { unsigned long entry; + pmd_t *pmd = pmd_page + pmd_index(address); if (address >= end) { if (!after_bootmem) @@ -263,6 +263,10 @@ phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) set_pmd(pmd, __pmd(0)); break; } + + if (pmd_val(*pmd)) + continue; + entry = _PAGE_NX|_PAGE_PSE|_KERNPG_TABLE|_PAGE_GLOBAL|address; entry &= __supported_pte_mask; set_pmd(pmd, __pmd(entry)); @@ -272,45 +276,41 @@ phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) static void __meminit phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end) { - pmd_t *pmd = pmd_offset(pud, (unsigned long)__va(address)); - - if (pmd_none(*pmd)) { - spin_lock(&init_mm.page_table_lock); - phys_pmd_init(pmd, address, end); - spin_unlock(&init_mm.page_table_lock); - __flush_tlb_all(); - } + pmd_t *pmd = pmd_offset(pud,0); + spin_lock(&init_mm.page_table_lock); + phys_pmd_init(pmd, address, end); + spin_unlock(&init_mm.page_table_lock); + __flush_tlb_all(); } -static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) +static void __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end) { - long i = pud_index(address); + int i = pud_index(addr); - pud = pud + i; - if (after_bootmem && pud_val(*pud)) { - phys_pmd_update(pud, address, end); - return; - } - - for (; i < PTRS_PER_PUD; pud++, i++) { + for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE ) { int map; - unsigned long paddr, pmd_phys; + unsigned long pmd_phys; + pud_t *pud = pud_page + pud_index(addr); pmd_t *pmd; - paddr = (address & PGDIR_MASK) + i*PUD_SIZE; - if (paddr >= end) + if (addr >= end) break; - if (!after_bootmem && !e820_any_mapped(paddr, paddr+PUD_SIZE, 0)) { + if (!after_bootmem && !e820_any_mapped(addr,addr+PUD_SIZE,0)) { set_pud(pud, __pud(0)); continue; } + if (pud_val(*pud)) { + phys_pmd_update(pud, addr, end); + continue; + } + pmd = alloc_low_page(&map, &pmd_phys); spin_lock(&init_mm.page_table_lock); set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE)); - phys_pmd_init(pmd, paddr, end); + phys_pmd_init(pmd, addr, end); spin_unlock(&init_mm.page_table_lock); unmap_low_page(map); } @@ -403,69 +403,15 @@ void __cpuinit zap_low_mappings(int cpu) __flush_tlb_all(); } -/* Compute zone sizes for the DMA and DMA32 zones in a node. */ -__init void -size_zones(unsigned long *z, unsigned long *h, - unsigned long start_pfn, unsigned long end_pfn) -{ - int i; - unsigned long w; - - for (i = 0; i < MAX_NR_ZONES; i++) - z[i] = 0; - - if (start_pfn < MAX_DMA_PFN) - z[ZONE_DMA] = MAX_DMA_PFN - start_pfn; - if (start_pfn < MAX_DMA32_PFN) { - unsigned long dma32_pfn = MAX_DMA32_PFN; - if (dma32_pfn > end_pfn) - dma32_pfn = end_pfn; - z[ZONE_DMA32] = dma32_pfn - start_pfn; - } - z[ZONE_NORMAL] = end_pfn - start_pfn; - - /* Remove lower zones from higher ones. */ - w = 0; - for (i = 0; i < MAX_NR_ZONES; i++) { - if (z[i]) - z[i] -= w; - w += z[i]; - } - - /* Compute holes */ - w = start_pfn; - for (i = 0; i < MAX_NR_ZONES; i++) { - unsigned long s = w; - w += z[i]; - h[i] = e820_hole_size(s, w); - } - - /* Add the space pace needed for mem_map to the holes too. */ - for (i = 0; i < MAX_NR_ZONES; i++) - h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE; - - /* The 16MB DMA zone has the kernel and other misc mappings. - Account them too */ - if (h[ZONE_DMA]) { - h[ZONE_DMA] += dma_reserve; - if (h[ZONE_DMA] >= z[ZONE_DMA]) { - printk(KERN_WARNING - "Kernel too large and filling up ZONE_DMA?\n"); - h[ZONE_DMA] = z[ZONE_DMA]; - } - } -} - #ifndef CONFIG_NUMA void __init paging_init(void) { - unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES]; - + unsigned long max_zone_pfns[MAX_NR_ZONES] = {MAX_DMA_PFN, + MAX_DMA32_PFN, + end_pfn}; memory_present(0, 0, end_pfn); sparse_init(); - size_zones(zones, holes, 0, end_pfn); - free_area_init_node(0, NODE_DATA(0), zones, - __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes); + free_area_init_nodes(max_zone_pfns); } #endif @@ -536,7 +482,7 @@ int memory_add_physaddr_to_nid(u64 start) int arch_add_memory(int nid, u64 start, u64 size) { struct pglist_data *pgdat = NODE_DATA(nid); - struct zone *zone = pgdat->node_zones + MAX_NR_ZONES-2; + struct zone *zone = pgdat->node_zones + ZONE_NORMAL; unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; int ret; @@ -597,12 +543,6 @@ void __init mem_init(void) pci_iommu_alloc(); - /* How many end-of-memory variables you have, grandma! */ - max_low_pfn = end_pfn; - max_pfn = end_pfn; - num_physpages = end_pfn; - high_memory = (void *) __va(end_pfn * PAGE_SIZE); - /* clear the zero-page */ memset(empty_zero_page, 0, PAGE_SIZE); @@ -614,7 +554,8 @@ void __init mem_init(void) #else totalram_pages = free_all_bootmem(); #endif - reservedpages = end_pfn - totalram_pages - e820_hole_size(0, end_pfn); + reservedpages = end_pfn - totalram_pages - + absent_pages_in_range(0, end_pfn); after_bootmem = 1; @@ -714,8 +655,10 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) #else reserve_bootmem(phys, len); #endif - if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) + if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) { dma_reserve += len / PAGE_SIZE; + set_dma_reserve(dma_reserve); + } } int kern_addr_valid(unsigned long addr) diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index 7c45c2d2b8b..b5b8dba28b4 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -54,6 +54,9 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) nodes_clear(nodes_parsed); + if (!early_pci_allowed()) + return -1; + nb = find_northbridge(); if (nb < 0) return nb; @@ -146,6 +149,9 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) nodes[nodeid].start = base; nodes[nodeid].end = limit; + e820_register_active_regions(nodeid, + nodes[nodeid].start >> PAGE_SHIFT, + nodes[nodeid].end >> PAGE_SHIFT); prevbase = base; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index b2fac14baac..829a008bd39 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -161,7 +161,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en bootmap_start >> PAGE_SHIFT, start_pfn, end_pfn); - e820_bootmem_free(NODE_DATA(nodeid), start, end); + free_bootmem_with_active_regions(nodeid, end); reserve_bootmem_node(NODE_DATA(nodeid), nodedata_phys, pgdat_size); reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start, bootmap_pages<<PAGE_SHIFT); @@ -175,13 +175,11 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en void __init setup_node_zones(int nodeid) { unsigned long start_pfn, end_pfn, memmapsize, limit; - unsigned long zones[MAX_NR_ZONES]; - unsigned long holes[MAX_NR_ZONES]; start_pfn = node_start_pfn(nodeid); end_pfn = node_end_pfn(nodeid); - Dprintk(KERN_INFO "Setting up node %d %lx-%lx\n", + Dprintk(KERN_INFO "Setting up memmap for node %d %lx-%lx\n", nodeid, start_pfn, end_pfn); /* Try to allocate mem_map at end to not fill up precious <4GB @@ -195,10 +193,6 @@ void __init setup_node_zones(int nodeid) round_down(limit - memmapsize, PAGE_SIZE), limit); #endif - - size_zones(zones, holes, start_pfn, end_pfn); - free_area_init_node(nodeid, NODE_DATA(nodeid), zones, - start_pfn, holes); } void __init numa_init_array(void) @@ -225,7 +219,7 @@ void __init numa_init_array(void) int numa_fake __initdata = 0; /* Numa emulation */ -static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) +static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { int i; struct bootnode nodes[MAX_NUMNODES]; @@ -259,8 +253,11 @@ static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) printk(KERN_ERR "No NUMA hash function found. Emulation disabled.\n"); return -1; } - for_each_online_node(i) + for_each_online_node(i) { + e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, + nodes[i].end >> PAGE_SHIFT); setup_node_bootmem(i, nodes[i].start, nodes[i].end); + } numa_init_array(); return 0; } @@ -299,6 +296,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) for (i = 0; i < NR_CPUS; i++) numa_set_node(i, 0); node_to_cpumask[0] = cpumask_of_cpu(0); + e820_register_active_regions(0, start_pfn, end_pfn); setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); } @@ -340,17 +338,23 @@ static void __init arch_sparse_init(void) void __init paging_init(void) { int i; + unsigned long max_zone_pfns[MAX_NR_ZONES] = { MAX_DMA_PFN, + MAX_DMA32_PFN, + end_pfn}; arch_sparse_init(); for_each_online_node(i) { setup_node_zones(i); } + + free_area_init_nodes(max_zone_pfns); } -/* [numa=off] */ -__init int numa_setup(char *opt) +static __init int numa_setup(char *opt) { + if (!opt) + return -EINVAL; if (!strncmp(opt,"off",3)) numa_off = 1; #ifdef CONFIG_NUMA_EMU @@ -366,9 +370,11 @@ __init int numa_setup(char *opt) if (!strncmp(opt,"hotadd=", 7)) hotadd_percent = simple_strtoul(opt+7, NULL, 10); #endif - return 1; + return 0; } +early_param("numa", numa_setup); + /* * Setup early cpu_to_node. * diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index 2685b1f3671..3e231d762aa 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -108,8 +108,8 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, address); BUG_ON(pmd_val(*pmd) & _PAGE_PSE); - pgprot_val(ref_prot) |= _PAGE_PSE; large_pte = mk_pte_phys(__pa(address) & LARGE_PAGE_MASK, ref_prot); + large_pte = pte_mkhuge(large_pte); set_pte((pte_t *)pmd, large_pte); } @@ -119,32 +119,28 @@ __change_page_attr(unsigned long address, unsigned long pfn, pgprot_t prot, { pte_t *kpte; struct page *kpte_page; - unsigned kpte_flags; pgprot_t ref_prot2; kpte = lookup_address(address); if (!kpte) return 0; kpte_page = virt_to_page(((unsigned long)kpte) & PAGE_MASK); - kpte_flags = pte_val(*kpte); if (pgprot_val(prot) != pgprot_val(ref_prot)) { - if ((kpte_flags & _PAGE_PSE) == 0) { + if (!pte_huge(*kpte)) { set_pte(kpte, pfn_pte(pfn, prot)); } else { /* * split_large_page will take the reference for this * change_page_attr on the split page. */ - struct page *split; - ref_prot2 = __pgprot(pgprot_val(pte_pgprot(*lookup_address(address))) & ~(1<<_PAGE_BIT_PSE)); - + ref_prot2 = pte_pgprot(pte_clrhuge(*kpte)); split = split_large_page(address, prot, ref_prot2); if (!split) return -ENOMEM; - set_pte(kpte,mk_pte(split, ref_prot2)); + set_pte(kpte, mk_pte(split, ref_prot2)); kpte_page = split; - } + } page_private(kpte_page)++; - } else if ((kpte_flags & _PAGE_PSE) == 0) { + } else if (!pte_huge(*kpte)) { set_pte(kpte, pfn_pte(pfn, ref_prot)); BUG_ON(page_private(kpte_page) == 0); page_private(kpte_page)--; @@ -190,10 +186,12 @@ int change_page_attr_addr(unsigned long address, int numpages, pgprot_t prot) * lowmem */ if (__pa(address) < KERNEL_TEXT_SIZE) { unsigned long addr2; - pgprot_t prot2 = prot; + pgprot_t prot2; addr2 = __START_KERNEL_map + __pa(address); - pgprot_val(prot2) &= ~_PAGE_NX; - err = __change_page_attr(addr2, pfn, prot2, PAGE_KERNEL_EXEC); + /* Make sure the kernel mappings stay executable */ + prot2 = pte_pgprot(pte_mkexec(pfn_pte(0, prot))); + err = __change_page_attr(addr2, pfn, prot2, + PAGE_KERNEL_EXEC); } } up_write(&init_mm.mmap_sem); diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 502fce65e96..f8c04d6935c 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -21,6 +21,8 @@ #include <asm/numa.h> #include <asm/e820.h> +int acpi_numa __initdata; + #if (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \ defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) \ && !defined(CONFIG_MEMORY_HOTPLUG) @@ -91,6 +93,7 @@ static __init void bad_srat(void) apicid_to_node[i] = NUMA_NO_NODE; for (i = 0; i < MAX_NUMNODES; i++) nodes_add[i].start = nodes[i].end = 0; + remove_all_active_ranges(); } static __init inline int srat_disabled(void) @@ -173,7 +176,7 @@ static int hotadd_enough_memory(struct bootnode *nd) if (mem < 0) return 0; - allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE; + allowed = (end_pfn - absent_pages_in_range(0, end_pfn)) * PAGE_SIZE; allowed = (allowed / 100) * hotadd_percent; if (allocated + mem > allowed) { unsigned long range; @@ -223,8 +226,10 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end) } /* This check might be a bit too strict, but I'm keeping it for now. */ - if (e820_hole_size(s_pfn, e_pfn) != e_pfn - s_pfn) { - printk(KERN_ERR "SRAT: Hotplug area has existing memory\n"); + if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) { + printk(KERN_ERR + "SRAT: Hotplug area %lu -> %lu has existing memory\n", + s_pfn, e_pfn); return -1; } @@ -317,6 +322,10 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm, nd->start, nd->end); + e820_register_active_regions(node, nd->start >> PAGE_SHIFT, + nd->end >> PAGE_SHIFT); + push_node_boundaries(node, nd->start >> PAGE_SHIFT, + nd->end >> PAGE_SHIFT); #ifdef RESERVE_HOTADD if (ma->flags.hot_pluggable && reserve_hotadd(node, start, end) < 0) { @@ -341,13 +350,13 @@ static int nodes_cover_memory(void) unsigned long s = nodes[i].start >> PAGE_SHIFT; unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; - pxmram -= e820_hole_size(s, e); + pxmram -= absent_pages_in_range(s, e); pxmram -= nodes_add[i].end - nodes_add[i].start; if ((long)pxmram < 0) pxmram = 0; } - e820ram = end_pfn - e820_hole_size(0, end_pfn); + e820ram = end_pfn - absent_pages_in_range(0, end_pfn); /* We seem to lose 3 pages somewhere. Allow a bit of slack. */ if ((long)(e820ram - pxmram) >= 1*1024*1024) { printk(KERN_ERR diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index a3f6ad57017..1eb18f421ed 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -9,7 +9,7 @@ obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o -obj-y += legacy.o irq.o common.o +obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o @@ -23,3 +23,4 @@ common-y += ../../i386/pci/common.o fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o init-y += ../../i386/pci/init.o +early-y += ../../i386/pci/early.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 3c55c76c6fd..7732f4254d2 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -156,15 +156,45 @@ static __init void unreachable_devices(void) addr = pci_dev_base(0, k, PCI_DEVFN(i, 0)); if (addr == NULL|| readl(addr) != val1) { set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE - "PCI: No mmconfig possible on device %x:%x\n", - k, i); + printk(KERN_NOTICE "PCI: No mmconfig possible" + " on device %02x:%02x\n", k, i); } } } } -void __init pci_mmcfg_init(void) +static __init void pci_mmcfg_insert_resources(void) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + num_buses = pci_mmcfg_config[i].end_bus_number - + pci_mmcfg_config[i].start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + pci_mmcfg_config[i].pci_segment_group_number); + res->start = pci_mmcfg_config[i].base_address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } +} + +void __init pci_mmcfg_init(int type) { int i; @@ -177,7 +207,9 @@ void __init pci_mmcfg_init(void) (pci_mmcfg_config[0].base_address == 0)) return; - if (!e820_all_mapped(pci_mmcfg_config[0].base_address, + /* Only do this check when type 1 works. If it doesn't work + assume we run on a Mac and always use MCFG */ + if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address, pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, E820_RESERVED)) { printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", @@ -186,7 +218,6 @@ void __init pci_mmcfg_init(void) return; } - /* RED-PEN i386 doesn't do _nocache right now */ pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk("PCI: Can not allocate memory for mmconfig structures\n"); @@ -205,6 +236,7 @@ void __init pci_mmcfg_init(void) } unreachable_devices(); + pci_mmcfg_insert_resources(); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; |