3 files changed, 54 insertions, 12 deletions

diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 90f4496017e..af54174801f 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -57,5 +57,5 @@ config PPC_MPC5200_BUGFIX
 
 config PPC_MPC5200_LPBFIFO
 	tristate "MPC5200 LocalPlus bus FIFO driver"
-	depends on PPC_MPC52xx
+	depends on PPC_MPC52xx && PPC_BESTCOMM
 	select PPC_BESTCOMM_GEN_BD
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9c9d15e4cdf..f75607c93e8 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -151,13 +151,23 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		rid_end = pe->rid + 1;
 	}
 
-	/* Associate PE in PELT */
+	/*
+	 * Associate PE in PELT. We need add the PE into the
+	 * corresponding PELT-V as well. Otherwise, the error
+	 * originated from the PE might contribute to other
+	 * PEs.
+	 */
 	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
 			     bcomp, dcomp, fcomp, OPAL_MAP_PE);
 	if (rc) {
 		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
 		return -ENXIO;
 	}
+
+	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+				pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
+	if (rc)
+		pe_warn(pe, "OPAL error %d adding self to PELTV\n", rc);
 	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
 				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
 
@@ -441,6 +451,17 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
 	set_iommu_table_base(&pdev->dev, &pe->tce32_table);
 }
 
+static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		set_iommu_table_base(&dev->dev, &pe->tce32_table);
+		if (dev->subordinate)
+			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+	}
+}
+
 static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
 					 u64 *startp, u64 *endp)
 {
@@ -596,6 +617,11 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 	}
 	iommu_init_table(tbl, phb->hose->node);
 
+	if (pe->pdev)
+		set_iommu_table_base(&pe->pdev->dev, tbl);
+	else
+		pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
 	return;
  fail:
 	/* XXX Failure: Try to fallback to 64-bit only ? */
@@ -667,6 +693,11 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 	}
 	iommu_init_table(tbl, phb->hose->node);
 
+	if (pe->pdev)
+		set_iommu_table_base(&pe->pdev->dev, tbl);
+	else
+		pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
 	return;
 fail:
 	if (pe->tce32_seg >= 0)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c11c8238797..54b998f2750 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -354,7 +354,7 @@ static int alloc_dispatch_log_kmem_cache(void)
 }
 early_initcall(alloc_dispatch_log_kmem_cache);
 
-static void pSeries_idle(void)
+static void pseries_lpar_idle(void)
 {
 	/* This would call on the cpuidle framework, and the back-end pseries
 	 * driver to  go to idle states
@@ -362,10 +362,22 @@ static void pSeries_idle(void)
 	if (cpuidle_idle_call()) {
 		/* On error, execute default handler
 		 * to go into low thread priority and possibly
-		 * low power mode.
+		 * low power mode by cedeing processor to hypervisor
 		 */
-		HMT_low();
-		HMT_very_low();
+
+		/* Indicate to hypervisor that we are idle. */
+		get_lppaca()->idle = 1;
+
+		/*
+		 * Yield the processor to the hypervisor.  We return if
+		 * an external interrupt occurs (which are driven prior
+		 * to returning here) or if a prod occurs from another
+		 * processor. When returning here, external interrupts
+		 * are enabled.
+		 */
+		cede_processor();
+
+		get_lppaca()->idle = 0;
 	}
 }
 
@@ -456,15 +468,14 @@ static void __init pSeries_setup_arch(void)
 
 	pSeries_nvram_init();
 
-	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+	if (firmware_has_feature(FW_FEATURE_LPAR)) {
 		vpa_init(boot_cpuid);
-		ppc_md.power_save = pSeries_idle;
-	}
-
-	if (firmware_has_feature(FW_FEATURE_LPAR))
+		ppc_md.power_save = pseries_lpar_idle;
 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
-	else
+	} else {
+		/* No special idle routine */
 		ppc_md.enable_pmcs = power4_enable_pmcs;
+	}
 
 	ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;