diff options
Diffstat (limited to 'arch/arm/Kconfig')
-rw-r--r-- | arch/arm/Kconfig | 136 |
1 files changed, 123 insertions, 13 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b714695b01..b67e45a9830 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,6 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select HAVE_VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -556,7 +555,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -744,6 +742,7 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT + select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -879,6 +878,7 @@ config ARCH_SHARK select ISA_DMA select NEED_MACH_MEMORY_H select PCI + select VIRT_TO_BUS select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known @@ -1006,12 +1006,12 @@ config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 - bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 select CPU_V6 config ARCH_MULTI_V7 - bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select ARCH_VEXPRESS @@ -1183,9 +1183,9 @@ config ARM_NR_BANKS default 8 config IWMMXT - bool "Enable iWMMXt support" + bool "Enable iWMMXt support" if !CPU_PJ4 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420 to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. +config ARM_ERRATA_798181 + bool "ARM errata: TLBI/DSB failure on Cortex-A15" + depends on CPU_V7 && SMP + help + On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not + adequately shooting down all use of the old entries. This + option enables the Linux kernel workaround for this erratum + which sends an IPI to the CPUs that are running the same ASID + as the one being invalidated. + endmenu source "arch/arm/common/Kconfig" @@ -1462,10 +1472,6 @@ config ISA_DMA bool select ISA_DMA_API -config ARCH_NO_VIRT_TO_BUS - def_bool y - depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK - # Select ISA DMA interface config ISA_DMA_API bool @@ -1582,6 +1588,91 @@ config SCHED_SMT MultiThreading at a cost of slightly increased overhead in some places. If unsure say N here. +config DISABLE_CPU_SCHED_DOMAIN_BALANCE + bool "(EXPERIMENTAL) Disable CPU level scheduler load-balancing" + help + Disables scheduler load-balancing at CPU sched domain level. + +config SCHED_HMP + bool "(EXPERIMENTAL) Heterogenous multiprocessor scheduling" + depends on DISABLE_CPU_SCHED_DOMAIN_BALANCE && SCHED_MC && FAIR_GROUP_SCHED && !SCHED_AUTOGROUP + help + Experimental scheduler optimizations for heterogeneous platforms. + Attempts to introspectively select task affinity to optimize power + and performance. Basic support for multiple (>2) cpu types is in place, + but it has only been tested with two types of cpus. + There is currently no support for migration of task groups, hence + !SCHED_AUTOGROUP. Furthermore, normal load-balancing must be disabled + between cpus of different type (DISABLE_CPU_SCHED_DOMAIN_BALANCE). + +config SCHED_HMP_PRIO_FILTER + bool "(EXPERIMENTAL) Filter HMP migrations by task priority" + depends on SCHED_HMP + default y + help + Enables task priority based HMP migration filter. Any task with + a NICE value above the threshold will always be on low-power cpus + with less compute capacity. + +config SCHED_HMP_PRIO_FILTER_VAL + int "NICE priority threshold" + default 5 + depends on SCHED_HMP_PRIO_FILTER + +config HMP_FAST_CPU_MASK + string "HMP scheduler fast CPU mask" + depends on SCHED_HMP + help + Leave empty to use device tree information. + Specify the cpuids of the fast CPUs in the system as a list string, + e.g. cpuid 0+1 should be specified as 0-1. + +config HMP_SLOW_CPU_MASK + string "HMP scheduler slow CPU mask" + depends on SCHED_HMP + help + Leave empty to use device tree information. + Specify the cpuids of the slow CPUs in the system as a list string, + e.g. cpuid 0+1 should be specified as 0-1. + +config HMP_VARIABLE_SCALE + bool "Allows changing the load tracking scale through sysfs" + depends on SCHED_HMP + help + When turned on, this option exports the thresholds and load average + period value for the load tracking patches through sysfs. + The values can be modified to change the rate of load accumulation + and the thresholds used for HMP migration. + The load_avg_period_ms is the time in ms to reach a load average of + 0.5 for an idle task of 0 load average ratio that start a busy loop. + The up_threshold and down_threshold is the value to go to a faster + CPU or to go back to a slower cpu. + The {up,down}_threshold are devided by 1024 before being compared + to the load average. + For examples, with load_avg_period_ms = 128 and up_threshold = 512, + a running task with a load of 0 will be migrated to a bigger CPU after + 128ms, because after 128ms its load_avg_ratio is 0.5 and the real + up_threshold is 0.5. + This patch has the same behavior as changing the Y of the load + average computation to + (1002/1024)^(LOAD_AVG_PERIOD/load_avg_period_ms) + but it remove intermadiate overflows in computation. + +config HMP_FREQUENCY_INVARIANT_SCALE + bool "(EXPERIMENTAL) Frequency-Invariant Tracked Load for HMP" + depends on HMP_VARIABLE_SCALE && CPU_FREQ + help + Scales the current load contribution in line with the frequency + of the CPU that the task was executed on. + In this version, we use a simple linear scale derived from the + maximum frequency reported by CPUFreq. + Restricting tracked load to be scaled by the CPU's frequency + represents the consumption of possible compute capacity + (rather than consumption of actual instantaneous capacity as + normal) and allows the HMP migration's simple threshold + migration strategy to interact more predictably with CPUFreq's + asynchronous compute capacity changes. + config HAVE_ARM_SCU bool help @@ -1600,6 +1691,21 @@ config HAVE_ARM_TWD help This options enables support for the ARM timer and watchdog unit +config MCPM + bool "Multi-Cluster Power Management" + depends on CPU_V7 && SMP + help + This option provides the common power management infrastructure + for (multi-)cluster based systems, such as big.LITTLE based + systems. + +config BIG_LITTLE + bool "big.LITTLE support (Experimental)" + depends on CPU_V7 && SMP + select MCPM + help + This option enables support for the big.LITTLE architecture. + choice prompt "Memory split" default VMSPLIT_3G @@ -1657,13 +1763,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 355 if ARCH_U8500 - default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 355 if ARCH_U8500 default 288 if ARCH_VT8500 || ARCH_SUNXI + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1887,8 +1996,9 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on ARM && OF + depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. |