diff options
36 files changed, 1851 insertions, 115 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index cb557be492b..a5c0663c2cd 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -13,9 +13,11 @@ config XTENSA select GENERIC_CPU_DEVICES select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP + select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_OPTIONAL_GPIOLIB select CLONE_BACKWARDS select IRQ_DOMAIN + select HAVE_OPROFILE help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both @@ -31,7 +33,7 @@ config GENERIC_HWEIGHT def_bool y config GENERIC_GPIO - def_bool y + bool config ARCH_HAS_ILOG2_U32 def_bool n @@ -71,6 +73,12 @@ config XTENSA_VARIANT_DC232B help This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). +config XTENSA_VARIANT_DC233C + bool "dc233c - Diamond 233L Standard Core Rev.C (LE)" + select MMU + help + This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE). + config XTENSA_VARIANT_S6000 bool "s6000 - Stretch software configurable processor" select VARIANT_IRQ_SWITCH @@ -197,6 +205,42 @@ config BUILTIN_DTB string "DTB to build into the kernel image" depends on OF +config BLK_DEV_SIMDISK + tristate "Host file-based simulated block device support" + default n + depends on XTENSA_PLATFORM_ISS + help + Create block devices that map to files in the host file system. + Device binding to host file may be changed at runtime via proc + interface provided the device is not in use. + +config BLK_DEV_SIMDISK_COUNT + int "Number of host file-based simulated block devices" + range 1 10 + depends on BLK_DEV_SIMDISK + default 2 + help + This is the default minimal number of created block devices. + Kernel/module parameter 'simdisk_count' may be used to change this + value at runtime. More file names (but no more than 10) may be + specified as parameters, simdisk_count grows accordingly. + +config SIMDISK0_FILENAME + string "Host filename for the first simulated device" + depends on BLK_DEV_SIMDISK = y + default "" + help + Attach a first simdisk to a host file. Conventionally, this file + contains a root file system. + +config SIMDISK1_FILENAME + string "Host filename for the second simulated device" + depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1 + default "" + help + Another simulated disk in a host file for a buildroot-independent + storage. + source "mm/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 0aa72702f17..136224b74d4 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -15,6 +15,7 @@ variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b +variant-$(CONFIG_XTENSA_VARIANT_DC233C) := dc233c variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000 variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom @@ -86,9 +87,10 @@ core-y += arch/xtensa/kernel/ arch/xtensa/mm/ core-y += $(buildvar) $(buildplf) libs-y += arch/xtensa/lib/ $(LIBGCC) +drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/ ifneq ($(CONFIG_BUILTIN_DTB),"") -core-$(CONFIG_OF) += arch/xtensa/boot/ +core-$(CONFIG_OF) += arch/xtensa/boot/dts/ endif boot := arch/xtensa/boot @@ -101,7 +103,7 @@ zImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ %.dtb: - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ define archhelp @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile index 818647e815d..64ffc4b53df 100644 --- a/arch/xtensa/boot/Makefile +++ b/arch/xtensa/boot/Makefile @@ -25,18 +25,6 @@ bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot - -BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o -ifneq ($(CONFIG_BUILTIN_DTB),"") -obj-$(CONFIG_OF) += $(BUILTIN_DTB) -endif - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -clean-files := *.dtb.S - zImage Image: $(bootdir-y) $(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ diff --git a/arch/xtensa/boot/dts/Makefile b/arch/xtensa/boot/dts/Makefile new file mode 100644 index 00000000000..5f711bba830 --- /dev/null +++ b/arch/xtensa/boot/dts/Makefile @@ -0,0 +1,15 @@ +# +# arch/xtensa/boot/dts/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o +ifneq ($(CONFIG_BUILTIN_DTB),"") +obj-$(CONFIG_OF) += $(BUILTIN_DTB) +endif + +clean-files := *.dtb.S diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index c3f289174c1..e7fb447bce8 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. */ #ifndef _XTENSA_ATOMIC_H @@ -24,11 +24,11 @@ /* * This Xtensa implementation assumes that the right mechanism - * for exclusion is for locking interrupts to level 1. + * for exclusion is for locking interrupts to level EXCM_LEVEL. * * Locking interrupts looks like this: * - * rsil a15, 1 + * rsil a15, LOCKLEVEL * <code> * wsr a15, PS * rsync diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h index aed7ad68ca4..0593de689b5 100644 --- a/arch/xtensa/include/asm/checksum.h +++ b/arch/xtensa/include/asm/checksum.h @@ -12,6 +12,7 @@ #define _XTENSA_CHECKSUM_H #include <linux/in6.h> +#include <asm/uaccess.h> #include <variant/core.h> /* diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h index 264d5fa450d..eacb25a4171 100644 --- a/arch/xtensa/include/asm/elf.h +++ b/arch/xtensa/include/asm/elf.h @@ -84,7 +84,8 @@ typedef struct { elf_greg_t sar; elf_greg_t windowstart; elf_greg_t windowbase; - elf_greg_t reserved[8+48]; + elf_greg_t threadptr; + elf_greg_t reserved[7+48]; elf_greg_t a[64]; } xtensa_gregset_t; diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index c90ea5bfa1b..d7546c94da5 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -410,6 +410,10 @@ typedef pte_t *pte_addr_t; #define __HAVE_ARCH_PTEP_SET_WRPROTECT #define __HAVE_ARCH_PTEP_MKDIRTY #define __HAVE_ARCH_PTE_SAME +/* We provide our own get_unmapped_area to cope with + * SHM area cache aliasing for userland. + */ +#define HAVE_ARCH_UNMAPPED_AREA #include <asm-generic/pgtable.h> diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index e5fb6b0abdf..7e409a5b0ec 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. */ #ifndef _XTENSA_PROCESSOR_H @@ -68,7 +68,7 @@ /* LOCKLEVEL defines the interrupt level that masks all * general-purpose interrupts. */ -#define LOCKLEVEL 1 +#define LOCKLEVEL XCHAL_EXCM_LEVEL /* WSBITS and WBBITS are the width of the WINDOWSTART and WINDOWBASE * registers diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h index 682b1deac1f..81f31bc9dde 100644 --- a/arch/xtensa/include/asm/ptrace.h +++ b/arch/xtensa/include/asm/ptrace.h @@ -38,6 +38,7 @@ struct pt_regs { unsigned long syscall; /* 56 */ unsigned long icountlevel; /* 60 */ unsigned long scompare1; /* 64 */ + unsigned long threadptr; /* 68 */ /* Additional configurable registers that are used by the compiler. */ xtregs_opt_t xtregs_opt; @@ -48,7 +49,7 @@ struct pt_regs { /* current register frame. * Note: The ESF for kernel exceptions ends after 16 registers! */ - unsigned long areg[16]; /* 128 (64) */ + unsigned long areg[16]; }; #include <variant/core.h> diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h index 76096a4e5b8..b24de671702 100644 --- a/arch/xtensa/include/asm/regs.h +++ b/arch/xtensa/include/asm/regs.h @@ -88,6 +88,7 @@ #define PS_UM_BIT 5 #define PS_EXCM_BIT 4 #define PS_INTLEVEL_SHIFT 0 +#define PS_INTLEVEL_WIDTH 4 #define PS_INTLEVEL_MASK 0x0000000F /* DBREAKCn register fields. */ diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h index 405a8c49ff2..8d5d9dfadb0 100644 --- a/arch/xtensa/include/asm/string.h +++ b/arch/xtensa/include/asm/string.h @@ -74,7 +74,7 @@ static inline int strcmp(const char *__cs, const char *__ct) "beqz %2, 2f\n\t" "beq %2, %3, 1b\n" "2:\n\t" - "sub %2, %3, %2" + "sub %2, %2, %3" : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) : "0" (__cs), "1" (__ct)); @@ -99,7 +99,7 @@ static inline int strncmp(const char *__cs, const char *__ct, size_t __n) "beqz %3, 2f\n\t" "beq %2, %3, 1b\n" "2:\n\t" - "sub %2, %3, %2" + "sub %2, %2, %3" : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) : "0" (__cs), "1" (__ct), "r" (__cs+__n)); diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index 175b3d5e1b0..9e85ce8bd8d 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. */ #ifndef _XTENSA_TIMEX_H @@ -19,13 +19,13 @@ #define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL #define INTLEVEL(x) _INTLEVEL(x) -#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1 +#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL # define LINUX_TIMER 0 # define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT -#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1 +#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL # define LINUX_TIMER 1 # define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT -#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1 +#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL # define LINUX_TIMER 2 # define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT #else diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h index 54f70440185..b5464ef3cf6 100644 --- a/arch/xtensa/include/asm/traps.h +++ b/arch/xtensa/include/asm/traps.h @@ -20,4 +20,28 @@ extern void * __init trap_set_handler(int cause, void *handler); extern void do_unhandled(struct pt_regs *regs, unsigned long exccause); +static inline void spill_registers(void) +{ + unsigned int a0, ps; + + __asm__ __volatile__ ( + "movi a14, " __stringify(PS_EXCM_BIT | LOCKLEVEL) "\n\t" + "mov a12, a0\n\t" + "rsr a13, sar\n\t" + "xsr a14, ps\n\t" + "movi a0, _spill_registers\n\t" + "rsync\n\t" + "callx0 a0\n\t" + "mov a0, a12\n\t" + "wsr a13, sar\n\t" + "wsr a14, ps\n\t" + : : "a" (&a0), "a" (&ps) +#if defined(CONFIG_FRAME_POINTER) + : "a2", "a3", "a4", "a11", "a12", "a13", "a14", "a15", +#else + : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", +#endif + "memory"); +} + #endif /* _XTENSA_TRAPS_H */ diff --git a/arch/xtensa/include/uapi/asm/signal.h b/arch/xtensa/include/uapi/asm/signal.h index dacf716dd3e..586756ee267 100644 --- a/arch/xtensa/include/uapi/asm/signal.h +++ b/arch/xtensa/include/uapi/asm/signal.h @@ -102,16 +102,7 @@ typedef struct { #ifndef __ASSEMBLY__ -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -/* Type of a signal handler. */ -typedef void (*__sighandler_t)(int); - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ +#include <asm-generic/signal-defs.h> #ifndef __KERNEL__ diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 19fac3f543a..51940fec699 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -728,8 +728,13 @@ __SYSCALL(330, sys_prlimit64, 4) #define __NR_kcmp 331 __SYSCALL(331, sys_kcmp, 5) +#define __NR_finit_module 332 +__SYSCALL(332, sys_finit_module, 3) -#define __NR_syscall_count 332 +#define __NR_accept4 333 +__SYSCALL(333, sys_accept4, 4) + +#define __NR_syscall_count 334 /* * sysxtensa syscall handler diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c index 0701fad170d..1915c7c889b 100644 --- a/arch/xtensa/kernel/asm-offsets.c +++ b/arch/xtensa/kernel/asm-offsets.c @@ -42,6 +42,7 @@ int main(void) DEFINE(PT_ICOUNTLEVEL, offsetof (struct pt_regs, icountlevel)); DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall)); DEFINE(PT_SCOMPARE1, offsetof(struct pt_regs, scompare1)); + DEFINE(PT_THREADPTR, offsetof(struct pt_regs, threadptr)); DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0])); DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0])); DEFINE(PT_AREG1, offsetof (struct pt_regs, areg[1])); diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 3777fec85e7..63845f95079 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004-2007 by Tensilica Inc. + * Copyright (C) 2004 - 2008 by Tensilica Inc. * * Chris Zankel <chris@zankel.net> * @@ -130,6 +130,11 @@ _user_exception: s32i a3, a1, PT_SAR s32i a2, a1, PT_ICOUNTLEVEL +#if XCHAL_HAVE_THREADPTR + rur a2, threadptr + s32i a2, a1, PT_THREADPTR +#endif + /* Rotate ws so that the current windowbase is at bit0. */ /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */ @@ -349,15 +354,16 @@ common_exception: * so we can allow exceptions and interrupts (*) again. * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X) * - * (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before - * (interrupts disabled) and if this exception is not an interrupt. + * (*) We only allow interrupts of higher priority than current IRQ */ rsr a3, ps addi a0, a0, -4 movi a2, 1 - extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0] - moveqz a3, a2, a0 # a3 = 1 iff interrupt exception + extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH + # a3 = PS.INTLEVEL + movnez a2, a3, a3 # a2 = 1: level-1, > 1: high priority + moveqz a3, a2, a0 # a3 = IRQ level iff interrupt movi a2, 1 << PS_WOE_BIT or a3, a3, a2 rsr a0, exccause @@ -398,7 +404,7 @@ common_exception: callx4 a4 /* Jump here for exception exit */ - + .global common_exception_return common_exception_return: /* Jump if we are returning from kernel exceptions. */ @@ -509,6 +515,11 @@ user_exception_exit: * (if we have restored WSBITS-1 frames). */ +#if XCHAL_HAVE_THREADPTR + l32i a3, a1, PT_THREADPTR + wur a3, threadptr +#endif + 2: j common_exception_exit /* This is the kernel exception exit. @@ -641,19 +652,51 @@ common_exception_exit: l32i a0, a1, PT_DEPC l32i a3, a1, PT_AREG3 + _bltui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + + wsr a0, depc l32i a2, a1, PT_AREG2 - _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + l32i a0, a1, PT_AREG0 + l32i a1, a1, PT_AREG1 + rfde +1: /* Restore a0...a3 and return */ + rsr a0, ps + extui a2, a0, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH + movi a0, 2f + slli a2, a2, 4 + add a0, a2, a0 + l32i a2, a1, PT_AREG2 + jx a0 + + .macro irq_exit_level level + .align 16 + .if XCHAL_EXCM_LEVEL >= \level + l32i a0, a1, PT_PC + wsr a0, epc\level l32i a0, a1, PT_AREG0 l32i a1, a1, PT_AREG1 - rfe + rfi \level + .endif + .endm -1: wsr a0, depc + .align 16 +2: l32i a0, a1, PT_AREG0 l32i a1, a1, PT_AREG1 - rfde + rfe + + .align 16 + /* no rfi for level-1 irq, handled by rfe above*/ + nop + + irq_exit_level 2 + irq_exit_level 3 + irq_exit_level 4 + irq_exit_level 5 + irq_exit_level 6 ENDPROC(kernel_exception) @@ -753,7 +796,7 @@ ENTRY(unrecoverable_exception) wsr a1, windowbase rsync - movi a1, (1 << PS_WOE_BIT) | 1 + movi a1, (1 << PS_WOE_BIT) | LOCKLEVEL wsr a1, ps rsync @@ -1474,7 +1517,7 @@ ENTRY(_spill_registers) l32i a1, a3, EXC_TABLE_KSTK wsr a3, excsave1 - movi a4, (1 << PS_WOE_BIT) | 1 + movi a4, (1 << PS_WOE_BIT) | LOCKLEVEL wsr a4, ps rsync @@ -1922,7 +1965,7 @@ ENTRY(_switch_to) s32i a6, a3, EXC_TABLE_FIXUP s32i a7, a3, EXC_TABLE_KSTK - /* restore context of the task that 'next' addresses */ + /* restore context of the task 'next' */ l32i a0, a13, THREAD_RA # restore return address l32i a1, a13, THREAD_SP # restore stack pointer diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 91d9095284d..df88f98737f 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. * * Chris Zankel <chris@zankel.net> * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> @@ -128,14 +128,14 @@ ENTRY(_startup) wsr a0, cpenable #endif - /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0 + /* Set PS.INTLEVEL=LOCKLEVEL, PS.WOE=0, kernel stack, PS.EXCM=0 * * Note: PS.EXCM must be cleared before using any loop * instructions; otherwise, they are silently disabled, and * at most one iteration of the loop is executed. */ - movi a1, 1 + movi a1, LOCKLEVEL wsr a1, ps rsync @@ -211,7 +211,8 @@ ENTRY(_startup) movi a1, init_thread_union addi a1, a1, KERNEL_STACK_SIZE - movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0 + movi a2, (1 << PS_WOE_BIT) | LOCKLEVEL + # WOE=1, INTLEVEL=LOCKLEVEL, UM=0 wsr a2, ps # (enable reg-windows; progmode stack) rsync diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 0dd5784416d..5cd82e9f601 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -259,9 +259,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn, memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], ®s->areg[XCHAL_NUM_AREGS - len/4], len); } -// FIXME: we need to set THREADPTR in thread_info... + + /* The thread pointer is passed in the '4th argument' (= a5) */ if (clone_flags & CLONE_SETTLS) - childregs->areg[2] = childregs->areg[6]; + childregs->threadptr = childregs->areg[5]; } else { p->thread.ra = MAKE_RA_FOR_CALL( (unsigned long)ret_from_kernel_thread, 1); diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index 61fb2e9e903..562fac66475 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -53,9 +53,8 @@ int ptrace_getregs(struct task_struct *child, void __user *uregs) { struct pt_regs *regs = task_pt_regs(child); xtensa_gregset_t __user *gregset = uregs; - unsigned long wm = regs->wmask; unsigned long wb = regs->windowbase; - int live, i; + int i; if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t))) return -EIO; @@ -67,13 +66,11 @@ int ptrace_getregs(struct task_struct *child, void __user *uregs) __put_user(regs->lcount, &gregset->lcount); __put_user(regs->windowstart, &gregset->windowstart); __put_user(regs->windowbase, &gregset->windowbase); + __put_user(regs->threadptr, &gregset->threadptr); - live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16; - - for (i = 0; i < live; i++) - __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS)); - for (i = XCHAL_NUM_AREGS - (wm >> 4) * 4; i < XCHAL_NUM_AREGS; i++) - __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS)); + for (i = 0; i < XCHAL_NUM_AREGS; i++) + __put_user(regs->areg[i], + gregset->a + ((wb * 4 + i) % XCHAL_NUM_AREGS)); return 0; } @@ -84,7 +81,7 @@ int ptrace_setregs(struct task_struct *child, void __user *uregs) xtensa_gregset_t *gregset = uregs; const unsigned long ps_mask = PS_CALLINC_MASK | PS_OWB_MASK; unsigned long ps; - unsigned long wb; + unsigned long wb, ws; if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t))) return -EIO; @@ -94,21 +91,33 @@ int ptrace_setregs(struct task_struct *child, void __user *uregs) __get_user(regs->lbeg, &gregset->lbeg); __get_user(regs->lend, &gregset->lend); __get_user(regs->lcount, &gregset->lcount); - __get_user(regs->windowstart, &gregset->windowstart); + __get_user(ws, &gregset->windowstart); __get_user(wb, &gregset->windowbase); + __get_user(regs->threadptr, &gregset->threadptr); regs->ps = (regs->ps & ~ps_mask) | (ps & ps_mask) | (1 << PS_EXCM_BIT); if (wb >= XCHAL_NUM_AREGS / 4) return -EFAULT; - regs->windowbase = wb; + if (wb != regs->windowbase || ws != regs->windowstart) { + unsigned long rotws, wmask; + + rotws = (((ws | (ws << WSBITS)) >> wb) & + ((1 << WSBITS) - 1)) & ~1; + wmask = ((rotws ? WSBITS + 1 - ffs(rotws) : 0) << 4) | + (rotws & 0xF) | 1; + regs->windowbase = wb; + regs->windowstart = ws; + regs->wmask = wmask; + } if (wb != 0 && __copy_from_user(regs->areg + XCHAL_NUM_AREGS - wb * 4, - gregset->a, wb * 16)) + gregset->a, wb * 16)) return -EFAULT; - if (__copy_from_user(regs->areg, gregset->a + wb*4, (WSBITS-wb) * 16)) + if (__copy_from_user(regs->areg, gregset->a + wb * 4, + (WSBITS - wb) * 16)) return -EFAULT; return 0; diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 24c1a57abb4..6dd25ecde3f 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -328,6 +328,27 @@ extern char _UserExceptionVector_literal_start; extern char _UserExceptionVector_text_end; extern char _DoubleExceptionVector_literal_start; extern char _DoubleExceptionVector_text_end; +#if XCHAL_EXCM_LEVEL >= 2 +extern char _Level2InterruptVector_text_start; +extern char _Level2InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 3 +extern char _Level3InterruptVector_text_start; +extern char _Level3InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 4 +extern char _Level4InterruptVector_text_start; +extern char _Level4InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 5 +extern char _Level5InterruptVector_text_start; +extern char _Level5InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 6 +extern char _Level6InterruptVector_text_start; +extern char _Level6InterruptVector_text_end; +#endif + #ifdef CONFIG_S32C1I_SELFTEST @@ -482,6 +503,27 @@ void __init setup_arch(char **cmdline_p) mem_reserve(__pa(&_DoubleExceptionVector_literal_start), __pa(&_DoubleExceptionVector_text_end), 0); +#if XCHAL_EXCM_LEVEL >= 2 + mem_reserve(__pa(&_Level2InterruptVector_text_start), + __pa(&_Level2InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 3 + mem_reserve(__pa(&_Level3InterruptVector_text_start), + __pa(&_Level3InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 4 + mem_reserve(__pa(&_Level4InterruptVector_text_start), + __pa(&_Level4InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 5 + mem_reserve(__pa(&_Level5InterruptVector_text_start), + __pa(&_Level5InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 6 + mem_reserve(__pa(&_Level6InterruptVector_text_start), + __pa(&_Level6InterruptVector_text_end), 0); +#endif + bootmem_init(); #ifdef CONFIG_OF diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index d7590dddd08..718eca1850b 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -337,7 +337,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, struct rt_sigframe *frame; int err = 0; int signal; - unsigned long sp, ra; + unsigned long sp, ra, tp; sp = regs->areg[1]; @@ -391,7 +391,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, * Return context not modified until this point. */ - /* Set up registers for signal handler */ + /* Set up registers for signal handler; preserve the threadptr */ + tp = regs->threadptr; start_thread(regs, (unsigned long) ka->sa.sa_handler, (unsigned long) frame); @@ -402,6 +403,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->areg[6] = (unsigned long) signal; regs->areg[7] = (unsigned long) &frame->info; regs->areg[8] = (unsigned long) &frame->uc; + regs->threadptr = tp; /* Set access mode to USER_DS. Nomenclature is outdated, but * functionality is used in uaccess.h diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index 54fa8425cee..5d3f7a119ed 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -36,6 +36,10 @@ syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= { #include <uapi/asm/unistd.h> }; +#define COLOUR_ALIGN(addr, pgoff) \ + ((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) + \ + (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1))) + asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) { unsigned long ret; @@ -52,3 +56,40 @@ asmlinkage long xtensa_fadvise64_64(int fd, int advice, { return sys_fadvise64_64(fd, offset, len, advice); } + +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct vm_area_struct *vmm; + + if (flags & MAP_FIXED) { + /* We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))) + return -EINVAL; + return addr; + } + + if (len > TASK_SIZE) + return -ENOMEM; + if (!addr) + addr = TASK_UNMAPPED_BASE; + + if (flags & MAP_SHARED) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { + /* At this point: (!vmm || addr < vmm->vm_end). */ + if (TASK_SIZE - len < addr) + return -ENOMEM; + if (!vmm || addr + len <= vmm->vm_start) + return addr; + addr = vmm->vm_end; + if (flags & MAP_SHARED) + addr = COLOUR_ALIGN(addr, pgoff); + } +} diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index ded955d4515..923db5c1527 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -37,6 +37,7 @@ #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/processor.h> +#include <asm/traps.h> #ifdef CONFIG_KGDB extern int gdb_enter; @@ -193,28 +194,49 @@ void do_multihit(struct pt_regs *regs, unsigned long exccause) } /* - * Level-1 interrupt. - * We currently have no priority encoding. + * IRQ handler. + * PS.INTLEVEL is the current IRQ priority level. */ -unsigned long ignored_level1_interrupts; extern void do_IRQ(int, struct pt_regs *); -void do_interrupt (struct pt_regs *regs) +void do_interrupt(struct pt_regs *regs) { - unsigned long intread = get_sr (interrupt); - unsigned long intenable = get_sr (intenable); - int i, mask; - - /* Handle all interrupts (no priorities). - * (Clear the interrupt before processing, in case it's - * edge-triggered or software-generated) - */ + static const unsigned int_level_mask[] = { + 0, + XCHAL_INTLEVEL1_MASK, + XCHAL_INTLEVEL2_MASK, + XCHAL_INTLEVEL3_MASK, + XCHAL_INTLEVEL4_MASK, + XCHAL_INTLEVEL5_MASK, + XCHAL_INTLEVEL6_MASK, + XCHAL_INTLEVEL7_MASK, + }; + unsigned level = get_sr(ps) & PS_INTLEVEL_MASK; + + if (WARN_ON_ONCE(level >= ARRAY_SIZE(int_level_mask))) + return; - for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) { - if (mask & (intread & intenable)) { - set_sr (mask, intclear); - do_IRQ (i,regs); + for (;;) { + unsigned intread = get_sr(interrupt); + unsigned intenable = get_sr(intenable); + unsigned int_at_level = intread & intenable & + int_level_mask[level]; + + if (!int_at_level) + return; + + /* + * Clear the interrupt before processing, in case it's + * edge-triggered or software-generated + */ + while (int_at_level) { + unsigned i = __ffs(int_at_level); + unsigned mask = 1 << i; + + int_at_level ^= mask; + set_sr(mask, intclear); + do_IRQ(i, regs); } } } @@ -392,26 +414,6 @@ static __always_inline unsigned long *stack_pointer(struct task_struct *task) return sp; } -static inline void spill_registers(void) -{ - unsigned int a0, ps; - - __asm__ __volatile__ ( - "movi a14, " __stringify(PS_EXCM_BIT | 1) "\n\t" - "mov a12, a0\n\t" - "rsr a13, sar\n\t" - "xsr a14, ps\n\t" - "movi a0, _spill_registers\n\t" - "rsync\n\t" - "callx0 a0\n\t" - "mov a0, a12\n\t" - "wsr a13, sar\n\t" - "wsr a14, ps\n\t" - :: "a" (&a0), "a" (&ps) - : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", - "memory"); -} - void show_trace(struct task_struct *task, unsigned long *sp) { unsigned long a0, a1, pc; diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index 68df35f66ce..82109b42e24 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -10,7 +10,7 @@ * Public License. See the file "COPYING" in the main directory of * this archive for more details. * - * Copyright (C) 2005 Tensilica, Inc. + * Copyright (C) 2005 - 2008 Tensilica, Inc. * * Chris Zankel <chris@zankel.net> * @@ -366,6 +366,41 @@ ENTRY(_DebugInterruptVector) ENDPROC(_DebugInterruptVector) + +/* + * Medium priority level interrupt vectors + * + * Each takes less than 16 (0x10) bytes, no literals, by placing + * the extra 8 bytes that would otherwise be required in the window + * vectors area where there is space. With relocatable vectors, + * all vectors are within ~ 4 kB range of each other, so we can + * simply jump (J) to another vector without having to use JX. + * + * common_exception code gets current IRQ level in PS.INTLEVEL + * and preserves it for the IRQ handling time. + */ + + .macro irq_entry_level level + + .if XCHAL_EXCM_LEVEL >= \level + .section .Level\level\()InterruptVector.text, "ax" +ENTRY(_Level\level\()InterruptVector) + wsr a0, epc1 + rsr a0, epc\level + xsr a0, epc1 + # branch to user or kernel vector + j _SimulateUserKernelVectorException + .endif + + .endm + + irq_entry_level 2 + irq_entry_level 3 + irq_entry_level 4 + irq_entry_level 5 + irq_entry_level 6 + + /* Window overflow and underflow handlers. * The handlers must be 64 bytes apart, first starting with the underflow * handlers underflow-4 to underflow-12, then the overflow handlers @@ -396,6 +431,26 @@ ENTRY_ALIGN64(_WindowOverflow4) ENDPROC(_WindowOverflow4) +#if XCHAL_EXCM_LEVEL >= 2 + /* Not a window vector - but a convenient location + * (where we know there's space) for continuation of + * medium priority interrupt dispatch code. + * On entry here, a0 contains PS, and EPC2 contains saved a0: + */ + .align 4 +_SimulateUserKernelVectorException: + wsr a0, excsave2 + movi a0, 4 # LEVEL1_INTERRUPT cause + wsr a0, exccause + rsr a0, ps + bbsi.l a0, PS_UM_BIT, 1f # branch if user mode + rsr a0, excsave2 # restore a0 + j _KernelExceptionVector # simulate kernel vector exception +1: rsr a0, excsave2 # restore a0 + j _UserExceptionVector # simulate user vector exception +#endif + + /* 4-Register Window Underflow Vector (Handler) */ ENTRY_ALIGN64(_WindowUnderflow4) diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 255154f820b..14695240536 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. * * Chris Zankel <chris@zankel.net> * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> @@ -134,6 +134,26 @@ SECTIONS RELOCATE_ENTRY(_WindowVectors_text, .WindowVectors.text); +#if XCHAL_EXCM_LEVEL >= 2 + RELOCATE_ENTRY(_Level2InterruptVector_text, + .Level2InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 3 + RELOCATE_ENTRY(_Level3InterruptVector_text, + .Level3InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 4 + RELOCATE_ENTRY(_Level4InterruptVector_text, + .Level4InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 5 + RELOCATE_ENTRY(_Level5InterruptVector_text, + .Level5InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 6 + RELOCATE_ENTRY(_Level6InterruptVector_text, + .Level6InterruptVector.text); +#endif RELOCATE_ENTRY(_KernelExceptionVector_text, .KernelExceptionVector.text); RELOCATE_ENTRY(_UserExceptionVector_text, @@ -177,11 +197,53 @@ SECTIONS XCHAL_DEBUG_VECTOR_VADDR, 4, .DebugInterruptVector.literal) +#undef LAST +#define LAST .DebugInterruptVector.text +#if XCHAL_EXCM_LEVEL >= 2 + SECTION_VECTOR (_Level2InterruptVector_text, + .Level2InterruptVector.text, + XCHAL_INTLEVEL2_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level2InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 3 + SECTION_VECTOR (_Level3InterruptVector_text, + .Level3InterruptVector.text, + XCHAL_INTLEVEL3_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level3InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 4 + SECTION_VECTOR (_Level4InterruptVector_text, + .Level4InterruptVector.text, + XCHAL_INTLEVEL4_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level4InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 5 + SECTION_VECTOR (_Level5InterruptVector_text, + .Level5InterruptVector.text, + XCHAL_INTLEVEL5_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level5InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 6 + SECTION_VECTOR (_Level6InterruptVector_text, + .Level6InterruptVector.text, + XCHAL_INTLEVEL6_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level6InterruptVector.text +#endif SECTION_VECTOR (_KernelExceptionVector_literal, .KernelExceptionVector.literal, XCHAL_KERNEL_VECTOR_VADDR - 4, - SIZEOF(.DebugInterruptVector.text), - .DebugInterruptVector.text) + SIZEOF(LAST), LAST) +#undef LAST SECTION_VECTOR (_KernelExceptionVector_text, .KernelExceptionVector.text, XCHAL_KERNEL_VECTOR_VADDR, diff --git a/arch/xtensa/oprofile/Makefile b/arch/xtensa/oprofile/Makefile new file mode 100644 index 00000000000..69ffbe80f18 --- /dev/null +++ b/arch/xtensa/oprofile/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o diff --git a/arch/xtensa/oprofile/backtrace.c b/arch/xtensa/oprofile/backtrace.c new file mode 100644 index 00000000000..66f32ee2c98 --- /dev/null +++ b/arch/xtensa/oprofile/backtrace.c @@ -0,0 +1,171 @@ +/** + * @file backtrace.c + * + * @remark Copyright 2008 Tensilica Inc. + * @remark Read the file COPYING + * + */ + +#include <linux/oprofile.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> +#include <asm/traps.h> + +/* Address of common_exception_return, used to check the + * transition from kernel to user space. + */ +extern int common_exception_return; + +/* A struct that maps to the part of the frame containing the a0 and + * a1 registers. + */ +struct frame_start { + unsigned long a0; + unsigned long a1; +}; + +static void xtensa_backtrace_user(struct pt_regs *regs, unsigned int depth) +{ + unsigned long windowstart = regs->windowstart; + unsigned long windowbase = regs->windowbase; + unsigned long a0 = regs->areg[0]; + unsigned long a1 = regs->areg[1]; + unsigned long pc = MAKE_PC_FROM_RA(a0, regs->pc); + int index; + + /* First add the current PC to the trace. */ + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + + /* Two steps: + * + * 1. Look through the register window for the + * previous PCs in the call trace. + * + * 2. Look on the stack. + */ + + /* Step 1. */ + /* Rotate WINDOWSTART to move the bit corresponding to + * the current window to the bit #0. + */ + windowstart = (windowstart << WSBITS | windowstart) >> windowbase; + + /* Look for bits that are set, they correspond to + * valid windows. + */ + for (index = WSBITS - 1; (index > 0) && depth; depth--, index--) + if (windowstart & (1 << index)) { + /* Read a0 and a1 from the + * corresponding position in AREGs. + */ + a0 = regs->areg[index * 4]; + a1 = regs->areg[index * 4 + 1]; + /* Get the PC from a0 and a1. */ + pc = MAKE_PC_FROM_RA(a0, pc); + + /* Add the PC to the trace. */ + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + } + + /* Step 2. */ + /* We are done with the register window, we need to + * look through the stack. + */ + if (depth > 0) { + /* Start from the a1 register. */ + /* a1 = regs->areg[1]; */ + while (a0 != 0 && depth--) { + + struct frame_start frame_start; + /* Get the location for a1, a0 for the + * previous frame from the current a1. + */ + unsigned long *psp = (unsigned long *)a1; + psp -= 4; + + /* Check if the region is OK to access. */ + if (!access_ok(VERIFY_READ, psp, sizeof(frame_start))) + return; + /* Copy a1, a0 from user space stack frame. */ + if (__copy_from_user_inatomic(&frame_start, psp, + sizeof(frame_start))) + return; + + a0 = frame_start.a0; + a1 = frame_start.a1; + pc = MAKE_PC_FROM_RA(a0, pc); + + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + } + } +} + +static void xtensa_backtrace_kernel(struct pt_regs *regs, unsigned int depth) +{ + unsigned long pc = regs->pc; + unsigned long *psp; + unsigned long sp_start, sp_end; + unsigned long a0 = regs->areg[0]; + unsigned long a1 = regs->areg[1]; + + sp_start = a1 & ~(THREAD_SIZE-1); + sp_end = sp_start + THREAD_SIZE; + + /* Spill the register window to the stack first. */ + spill_registers(); + + /* Read the stack frames one by one and create the PC + * from the a0 and a1 registers saved there. + */ + while (a1 > sp_start && a1 < sp_end && depth--) { + pc = MAKE_PC_FROM_RA(a0, pc); + + /* Add the PC to the trace. */ + if (kernel_text_address(pc)) + oprofile_add_trace(pc); + + if (pc == (unsigned long) &common_exception_return) { + regs = (struct pt_regs *)a1; + if (user_mode(regs)) { + pc = regs->pc; + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + return xtensa_backtrace_user(regs, depth); + } + a0 = regs->areg[0]; + a1 = regs->areg[1]; + continue; + } + + psp = (unsigned long *)a1; + + a0 = *(psp - 4); + a1 = *(psp - 3); + + if (a1 <= (unsigned long)psp) + return; + + } + return; +} + +void xtensa_backtrace(struct pt_regs * const regs, unsigned int depth) +{ + if (user_mode(regs)) + xtensa_backtrace_user(regs, depth); + else + xtensa_backtrace_kernel(regs, depth); +} diff --git a/arch/xtensa/oprofile/init.c b/arch/xtensa/oprofile/init.c new file mode 100644 index 00000000000..a67eea37976 --- /dev/null +++ b/arch/xtensa/oprofile/init.c @@ -0,0 +1,26 @@ +/** + * @file init.c + * + * @remark Copyright 2008 Tensilica Inc. + * @remark Read the file COPYING + * + */ + +#include <linux/kernel.h> +#include <linux/oprofile.h> +#include <linux/errno.h> +#include <linux/init.h> + + +extern void xtensa_backtrace(struct pt_regs *const regs, unsigned int depth); + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + ops->backtrace = xtensa_backtrace; + return -ENODEV; +} + + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/xtensa/platforms/iss/Makefile b/arch/xtensa/platforms/iss/Makefile index b7d1a5c0ff7..d2369b799c5 100644 --- a/arch/xtensa/platforms/iss/Makefile +++ b/arch/xtensa/platforms/iss/Makefile @@ -6,3 +6,4 @@ obj-y = console.o setup.o obj-$(CONFIG_NET) += network.o +obj-$(CONFIG_BLK_DEV_SIMDISK) += simdisk.o diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c new file mode 100644 index 00000000000..f58ffc3b68a --- /dev/null +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -0,0 +1,375 @@ +/* + * arch/xtensa/platforms/iss/simdisk.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2013 Tensilica Inc. + * Authors Victor Prupis + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/blkdev.h> +#include <linux/bio.h> +#include <linux/proc_fs.h> +#include <asm/uaccess.h> +#include <platform/simcall.h> + +#define SIMDISK_MAJOR 240 +#define SECTOR_SHIFT 9 +#define SIMDISK_MINORS 1 +#define MAX_SIMDISK_COUNT 10 + +struct simdisk { + const char *filename; + spinlock_t lock; + struct request_queue *queue; + struct gendisk *gd; + struct proc_dir_entry *procfile; + int users; + unsigned long size; + int fd; +}; + + +static int simdisk_count = CONFIG_BLK_DEV_SIMDISK_COUNT; +module_param(simdisk_count, int, S_IRUGO); +MODULE_PARM_DESC(simdisk_count, "Number of simdisk units."); + +static int n_files; +static const char *filename[MAX_SIMDISK_COUNT] = { +#ifdef CONFIG_SIMDISK0_FILENAME + CONFIG_SIMDISK0_FILENAME, +#ifdef CONFIG_SIMDISK1_FILENAME + CONFIG_SIMDISK1_FILENAME, +#endif +#endif +}; + +static int simdisk_param_set_filename(const char *val, + const struct kernel_param *kp) +{ + if (n_files < ARRAY_SIZE(filename)) + filename[n_files++] = val; + else + return -EINVAL; + return 0; +} + +static const struct kernel_param_ops simdisk_param_ops_filename = { + .set = simdisk_param_set_filename, +}; +module_param_cb(filename, &simdisk_param_ops_filename, &n_files, 0); +MODULE_PARM_DESC(filename, "Backing storage filename."); + +static int simdisk_major = SIMDISK_MAJOR; + +static void simdisk_transfer(struct simdisk *dev, unsigned long sector, + unsigned long nsect, char *buffer, int write) +{ + unsigned long offset = sector << SECTOR_SHIFT; + unsigned long nbytes = nsect << SECTOR_SHIFT; + + if (offset > dev->size || dev->size - offset < nbytes) { + pr_notice("Beyond-end %s (%ld %ld)\n", + write ? "write" : "read", offset, nbytes); + return; + } + + spin_lock(&dev->lock); + while (nbytes > 0) { + unsigned long io; + + __simc(SYS_lseek, dev->fd, offset, SEEK_SET, 0, 0); + if (write) + io = simc_write(dev->fd, buffer, nbytes); + else + io = simc_read(dev->fd, buffer, nbytes); + if (io == -1) { + pr_err("SIMDISK: IO error %d\n", errno); + break; + } + buffer += io; + offset += io; + nbytes -= io; + } + spin_unlock(&dev->lock); +} + +static int simdisk_xfer_bio(struct simdisk *dev, struct bio *bio) +{ + int i; + struct bio_vec *bvec; + sector_t sector = bio->bi_sector; + + bio_for_each_segment(bvec, bio, i) { + char *buffer = __bio_kmap_atomic(bio, i, KM_USER0); + unsigned len = bvec->bv_len >> SECTOR_SHIFT; + + simdisk_transfer(dev, sector, len, buffer, + bio_data_dir(bio) == WRITE); + sector += len; + __bio_kunmap_atomic(bio, KM_USER0); + } + return 0; +} + +static void simdisk_make_request(struct request_queue *q, struct bio *bio) +{ + struct simdisk *dev = q->queuedata; + int status = simdisk_xfer_bio(dev, bio); + bio_endio(bio, status); +} + + +static int simdisk_open(struct block_device *bdev, fmode_t mode) +{ + struct simdisk *dev = bdev->bd_disk->private_data; + + spin_lock(&dev->lock); + if (!dev->users) + check_disk_change(bdev); + ++dev->users; + spin_unlock(&dev->lock); + return 0; +} + +static int simdisk_release(struct gendisk *disk, fmode_t mode) +{ + struct simdisk *dev = disk->private_data; + spin_lock(&dev->lock); + --dev->users; + spin_unlock(&dev->lock); + return 0; +} + +static const struct block_device_operations simdisk_ops = { + .owner = THIS_MODULE, + .open = simdisk_open, + .release = simdisk_release, +}; + +static struct simdisk *sddev; +static struct proc_dir_entry *simdisk_procdir; + +static int simdisk_attach(struct simdisk *dev, const char *filename) +{ + int err = 0; + + filename = kstrdup(filename, GFP_KERNEL); + if (filename == NULL) + return -ENOMEM; + + spin_lock(&dev->lock); + + if (dev->fd != -1) { + err = -EBUSY; + goto out; + } + dev->fd = simc_open(filename, O_RDWR, 0); + if (dev->fd == -1) { + pr_err("SIMDISK: Can't open %s: %d\n", filename, errno); + err = -ENODEV; + goto out; + } + dev->size = __simc(SYS_lseek, dev->fd, 0, SEEK_END, 0, 0); + set_capacity(dev->gd, dev->size >> SECTOR_SHIFT); + dev->filename = filename; + pr_info("SIMDISK: %s=%s\n", dev->gd->disk_name, dev->filename); +out: + if (err) + kfree(filename); + spin_unlock(&dev->lock); + + return err; +} + +static int simdisk_detach(struct simdisk *dev) +{ + int err = 0; + + spin_lock(&dev->lock); + + if (dev->users != 0) { + err = -EBUSY; + } else if (dev->fd != -1) { + if (simc_close(dev->fd)) { + pr_err("SIMDISK: error closing %s: %d\n", + dev->filename, errno); + err = -EIO; + } else { + pr_info("SIMDISK: %s detached from %s\n", + dev->gd->disk_name, dev->filename); + dev->fd = -1; + kfree(dev->filename); + dev->filename = NULL; + } + } + spin_unlock(&dev->lock); + return err; +} + +static int proc_read_simdisk(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + struct simdisk *dev = (struct simdisk *) data; + len = sprintf(page, "%s\n", dev->filename ? dev->filename : ""); + return len; +} + +static int proc_write_simdisk(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + char *tmp = kmalloc(count + 1, GFP_KERNEL); + struct simdisk *dev = (struct simdisk *) data; + int err; + + if (tmp == NULL) + return -ENOMEM; + if (copy_from_user(tmp, buffer, count)) { + err = -EFAULT; + goto out_free; + } + + err = simdisk_detach(dev); + if (err != 0) + goto out_free; + + if (count > 0 && tmp[count - 1] == '\n') + tmp[count - 1] = 0; + else + tmp[count] = 0; + + if (tmp[0]) + err = simdisk_attach(dev, tmp); + + if (err == 0) + err = count; +out_free: + kfree(tmp); + return err; +} + +static int __init simdisk_setup(struct simdisk *dev, int which, + struct proc_dir_entry *procdir) +{ + char tmp[2] = { '0' + which, 0 }; + + dev->fd = -1; + dev->filename = NULL; + spin_lock_init(&dev->lock); + dev->users = 0; + + dev->queue = blk_alloc_queue(GFP_KERNEL); + if (dev->queue == NULL) { + pr_err("blk_alloc_queue failed\n"); + goto out_alloc_queue; + } + + blk_queue_make_request(dev->queue, simdisk_make_request); + dev->queue->queuedata = dev; + + dev->gd = alloc_disk(SIMDISK_MINORS); + if (dev->gd == NULL) { + pr_err("alloc_disk failed\n"); + goto out_alloc_disk; + } + dev->gd->major = simdisk_major; + dev->gd->first_minor = which; + dev->gd->fops = &simdisk_ops; + dev->gd->queue = dev->queue; + dev->gd->private_data = dev; + snprintf(dev->gd->disk_name, 32, "simdisk%d", which); + set_capacity(dev->gd, 0); + add_disk(dev->gd); + + dev->procfile = create_proc_entry(tmp, 0644, procdir); + dev->procfile->data = dev; + dev->procfile->read_proc = proc_read_simdisk; + dev->procfile->write_proc = proc_write_simdisk; + return 0; + +out_alloc_disk: + blk_cleanup_queue(dev->queue); + dev->queue = NULL; +out_alloc_queue: + simc_close(dev->fd); + return -EIO; +} + +static int __init simdisk_init(void) +{ + int i; + + if (register_blkdev(simdisk_major, "simdisk") < 0) { + pr_err("SIMDISK: register_blkdev: %d\n", simdisk_major); + return -EIO; + } + pr_info("SIMDISK: major: %d\n", simdisk_major); + + if (n_files > simdisk_count) + simdisk_count = n_files; + if (simdisk_count > MAX_SIMDISK_COUNT) + simdisk_count = MAX_SIMDISK_COUNT; + + sddev = kmalloc(simdisk_count * sizeof(struct simdisk), + GFP_KERNEL); + if (sddev == NULL) + goto out_unregister; + + simdisk_procdir = proc_mkdir("simdisk", 0); + if (simdisk_procdir == NULL) + goto out_free_unregister; + + for (i = 0; i < simdisk_count; ++i) { + if (simdisk_setup(sddev + i, i, simdisk_procdir) == 0) { + if (filename[i] != NULL && filename[i][0] != 0 && + (n_files == 0 || i < n_files)) + simdisk_attach(sddev + i, filename[i]); + } + } + + return 0; + +out_free_unregister: + kfree(sddev); +out_unregister: + unregister_blkdev(simdisk_major, "simdisk"); + return -ENOMEM; +} +module_init(simdisk_init); + +static void simdisk_teardown(struct simdisk *dev, int which, + struct proc_dir_entry *procdir) +{ + char tmp[2] = { '0' + which, 0 }; + + simdisk_detach(dev); + if (dev->gd) + del_gendisk(dev->gd); + if (dev->queue) + blk_cleanup_queue(dev->queue); + remove_proc_entry(tmp, procdir); +} + +static void __exit simdisk_exit(void) +{ + int i; + + for (i = 0; i < simdisk_count; ++i) + simdisk_teardown(sddev + i, i, simdisk_procdir); + remove_proc_entry("simdisk", 0); + kfree(sddev); + unregister_blkdev(simdisk_major, "simdisk"); +} +module_exit(simdisk_exit); + +MODULE_ALIAS_BLOCKDEV_MAJOR(SIMDISK_MAJOR); + +MODULE_LICENSE("GPL"); diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 4b9951a4569..9d888a2a575 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -100,7 +100,7 @@ static void __init update_clock_frequency(struct device_node *node) } *(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR); - prom_update_property(node, newfreq); + of_update_property(node, newfreq); } #define MAC_LEN 6 @@ -128,7 +128,7 @@ static void __init update_local_mac(struct device_node *node) memcpy(newmac->value, macaddr, MAC_LEN); ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f; - prom_update_property(node, newmac); + of_update_property(node, newmac); } static int __init machine_setup(void) diff --git a/arch/xtensa/variants/dc233c/include/variant/core.h b/arch/xtensa/variants/dc233c/include/variant/core.h new file mode 100644 index 00000000000..3a2e53b9493 --- /dev/null +++ b/arch/xtensa/variants/dc233c/include/variant/core.h @@ -0,0 +1,475 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Copyright (c) 1999-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* floating point pkg */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_accel 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 900001 /* sw version of this header */ + +#define XCHAL_CORE_ID "dc233c" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_CORE_DESCRIPTION "dc233c" +#define XCHAL_BUILD_UNIQUE_ID 0x00004B21 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC56707FE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x14404B21 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX4.0.1" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2400 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 1 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 240001 /* major*100+minor */ +#define XCHAL_HW_REL_LX4 1 +#define XCHAL_HW_REL_LX4_0 1 +#define XCHAL_HW_REL_LX4_0_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2400 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 1 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 240001 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2400 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 1 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 240001 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 7 +#define XCHAL_DCACHE_SETWIDTH 7 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 4 +#define XCHAL_DCACHE_WAYS 4 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 1 +#define XCHAL_DCACHE_LINE_LOCKABLE 1 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 4 +#define XCHAL_DCACHE_ACCESS_SIZE 4 + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00200E00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 +#define XCHAL_INT15_LEVEL 1 +#define XCHAL_INT16_LEVEL 1 +#define XCHAL_INT17_LEVEL 1 +#define XCHAL_INT18_LEVEL 1 +#define XCHAL_INT19_LEVEL 1 +#define XCHAL_INT20_LEVEL 1 +#define XCHAL_INT21_LEVEL 3 +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL2_NUM 8 +#define XCHAL_INTLEVEL4_NUM 12 +#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x00002000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x00002000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x00001000 +#define XCHAL_RESET_VECTOR1_PADDR 0x00001000 +#define XCHAL_RESET_VECTOR_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000000 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0x00002340 +#define XCHAL_USER_VECTOR_PADDR 0x00002340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0x00002300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00002300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x000023C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000023C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x00002000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00002000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x00002180 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00002180 +#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x000021C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x000021C0 +#define XCHAL_INTLEVEL4_VECOFS 0x00000200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x00002200 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x00002200 +#define XCHAL_INTLEVEL5_VECOFS 0x00000240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x00002240 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x00002240 +#define XCHAL_INTLEVEL6_VECOFS 0x00000280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x00002280 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00002280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x000002C0 +#define XCHAL_NMI_VECTOR_VADDR 0x000022C0 +#define XCHAL_NMI_VECTOR_PADDR 0x000022C0 +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 6 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ +#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ +#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/arch/xtensa/variants/dc233c/include/variant/tie-asm.h b/arch/xtensa/variants/dc233c/include/variant/tie-asm.h new file mode 100644 index 00000000000..5dbd981ea42 --- /dev/null +++ b/arch/xtensa/variants/dc233c/include/variant/tie-asm.h @@ -0,0 +1,193 @@ +/* + * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file contains assembly-language definitions (assembly + macros, etc.) for this specific Xtensa processor's TIE extensions + and options. It is customized to this Xtensa processor configuration. + + Copyright (c) 1999-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +#define XTHAL_SAS_ANYCC 0x000C /* both of the above */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ +#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \ + | ((ccuse) & XTHAL_SAS_ANYCC) \ + | ((abi) & XTHAL_SAS_ANYABI) ) + + + + /* + * Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger store sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to store. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to store, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any store. + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional global register used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select) + xchal_sa_align \ptr, 0, 1020, 4, 4 + rur.THREADPTR \at1 // threadptr option + s32i \at1, \ptr, .Lxchal_ofs_+0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1020, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + rsr \at1, ACCLO // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr \at1, ACCHI // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + rsr \at1, M0 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr \at1, M1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + rsr \at1, M2 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+8 + rsr \at1, M3 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+12 + rsr \at1, SCOMPARE1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_+16 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_store + + /* + * Macro to restore all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger load sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to load. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to load, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any load. + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional global register used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select) + xchal_sa_align \ptr, 0, 1020, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wur.THREADPTR \at1 // threadptr option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1020, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr \at1, ACCLO // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr \at1, ACCHI // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr \at1, M0 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr \at1, M1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+8 + wsr \at1, M2 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+12 + wsr \at1, M3 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+16 + wsr \at1, SCOMPARE1 // conditional store option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_load + + +#define XCHAL_NCP_NUM_ATMPS 1 + + + +#define XCHAL_SA_NUM_ATMPS 1 + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/arch/xtensa/variants/dc233c/include/variant/tie.h b/arch/xtensa/variants/dc233c/include/variant/tie.h new file mode 100644 index 00000000000..815e52bc3d0 --- /dev/null +++ b/arch/xtensa/variants/dc233c/include/variant/tie.h @@ -0,0 +1,150 @@ +/* + * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file describes this specific Xtensa processor's TIE extensions + that extend basic Xtensa core functionality. It is customized to this + Xtensa processor configuration. + + Copyright (c) 1999-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 1 /* number of coprocessors */ +#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP7_NAME "XTIOP" +#define XCHAL_CP7_IDENT XTIOP +#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ +#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ +#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP6_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 32 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 8 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 + +#endif /*_XTENSA_CORE_TIE_H*/ + |