diff options
49 files changed, 4455 insertions, 259 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index d6003531bd6..bb594963f91 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -21,4 +21,35 @@ config KXSD9 Say yes here to build support for the Kionix KXSD9 accelerometer. Currently this only supports the device via an SPI interface. +config IIO_ST_ACCEL_3AXIS + tristate "STMicroelectronics accelerometers 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_ACCEL_I2C_3AXIS if (I2C) + select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER) + help + Say yes here to build support for STMicroelectronics accelerometers: + LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, + LIS331DLH, LSM303DL, LSM303DLM, LSM330. + + This driver can also be built as a module. If so, will be created + these modules: + - st_accel (core functions for the driver [it is mandatory]); + - st_accel_i2c (necessary for the I2C devices [optional*]); + - st_accel_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_ACCEL_I2C_3AXIS + tristate + depends on IIO_ST_ACCEL_3AXIS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_ACCEL_SPI_3AXIS + tristate + depends on IIO_ST_ACCEL_3AXIS + depends on IIO_ST_SENSORS_SPI + endmenu diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 4e1c85987d1..87d8fa26489 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -3,4 +3,12 @@ # obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o + +obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o +st_accel-y := st_accel_core.o +st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o + +obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o +obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o + obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h new file mode 100644 index 00000000000..37949b94377 --- /dev/null +++ b/drivers/iio/accel/st_accel.h @@ -0,0 +1,47 @@ +/* + * STMicroelectronics accelerometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * v. 1.0.0 + * Licensed under the GPL-2. + */ + +#ifndef ST_ACCEL_H +#define ST_ACCEL_H + +#include <linux/types.h> +#include <linux/iio/common/st_sensors.h> + +#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel" +#define LIS3DH_ACCEL_DEV_NAME "lis3dh" +#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel" +#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel" +#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel" +#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh" +#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel" +#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel" +#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel" +#define LSM330_ACCEL_DEV_NAME "lsm330_accel" + +int st_accel_common_probe(struct iio_dev *indio_dev); +void st_accel_common_remove(struct iio_dev *indio_dev); + +#ifdef CONFIG_IIO_BUFFER +int st_accel_allocate_ring(struct iio_dev *indio_dev); +void st_accel_deallocate_ring(struct iio_dev *indio_dev); +int st_accel_trig_set_state(struct iio_trigger *trig, bool state); +#define ST_ACCEL_TRIGGER_SET_STATE (&st_accel_trig_set_state) +#else /* CONFIG_IIO_BUFFER */ +static inline int st_accel_allocate_ring(struct iio_dev *indio_dev) +{ + return 0; +} +static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev) +{ +} +#define ST_ACCEL_TRIGGER_SET_STATE NULL +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* ST_ACCEL_H */ diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c new file mode 100644 index 00000000000..6bd82c7f769 --- /dev/null +++ b/drivers/iio/accel/st_accel_buffer.c @@ -0,0 +1,114 @@ +/* + * STMicroelectronics accelerometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_accel.h" + +int st_accel_trig_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = trig->private_data; + + return st_sensors_set_dataready_irq(indio_dev, state); +} + +static int st_accel_buffer_preenable(struct iio_dev *indio_dev) +{ + int err; + + err = st_sensors_set_enable(indio_dev, true); + if (err < 0) + goto st_accel_set_enable_error; + + err = iio_sw_buffer_preenable(indio_dev); + +st_accel_set_enable_error: + return err; +} + +static int st_accel_buffer_postenable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *adata = iio_priv(indio_dev); + + adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (adata->buffer_data == NULL) { + err = -ENOMEM; + goto allocate_memory_error; + } + + err = st_sensors_set_axis_enable(indio_dev, + (u8)indio_dev->active_scan_mask[0]); + if (err < 0) + goto st_accel_buffer_postenable_error; + + err = iio_triggered_buffer_postenable(indio_dev); + if (err < 0) + goto st_accel_buffer_postenable_error; + + return err; + +st_accel_buffer_postenable_error: + kfree(adata->buffer_data); +allocate_memory_error: + return err; +} + +static int st_accel_buffer_predisable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *adata = iio_priv(indio_dev); + + err = iio_triggered_buffer_predisable(indio_dev); + if (err < 0) + goto st_accel_buffer_predisable_error; + + err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS); + if (err < 0) + goto st_accel_buffer_predisable_error; + + err = st_sensors_set_enable(indio_dev, false); + +st_accel_buffer_predisable_error: + kfree(adata->buffer_data); + return err; +} + +static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = { + .preenable = &st_accel_buffer_preenable, + .postenable = &st_accel_buffer_postenable, + .predisable = &st_accel_buffer_predisable, +}; + +int st_accel_allocate_ring(struct iio_dev *indio_dev) +{ + return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &st_sensors_trigger_handler, &st_accel_buffer_setup_ops); +} + +void st_accel_deallocate_ring(struct iio_dev *indio_dev) +{ + iio_triggered_buffer_cleanup(indio_dev); +} + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c new file mode 100644 index 00000000000..a235de252a9 --- /dev/null +++ b/drivers/iio/accel/st_accel_core.c @@ -0,0 +1,495 @@ +/* + * STMicroelectronics accelerometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_accel.h" + +/* DEFAULT VALUE FOR SENSORS */ +#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28 +#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a +#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c + +/* FULLSCALE */ +#define ST_ACCEL_FS_AVL_2G 2 +#define ST_ACCEL_FS_AVL_4G 4 +#define ST_ACCEL_FS_AVL_6G 6 +#define ST_ACCEL_FS_AVL_8G 8 +#define ST_ACCEL_FS_AVL_16G 16 + +/* CUSTOM VALUES FOR SENSOR 1 */ +#define ST_ACCEL_1_WAI_EXP 0x33 +#define ST_ACCEL_1_ODR_ADDR 0x20 +#define ST_ACCEL_1_ODR_MASK 0xf0 +#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01 +#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02 +#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03 +#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04 +#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05 +#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06 +#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07 +#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08 +#define ST_ACCEL_1_FS_ADDR 0x23 +#define ST_ACCEL_1_FS_MASK 0x30 +#define ST_ACCEL_1_FS_AVL_2_VAL 0x00 +#define ST_ACCEL_1_FS_AVL_4_VAL 0x01 +#define ST_ACCEL_1_FS_AVL_8_VAL 0x02 +#define ST_ACCEL_1_FS_AVL_16_VAL 0x03 +#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000) +#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000) +#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000) +#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000) +#define ST_ACCEL_1_BDU_ADDR 0x23 +#define ST_ACCEL_1_BDU_MASK 0x80 +#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22 +#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10 +#define ST_ACCEL_1_MULTIREAD_BIT true + +/* CUSTOM VALUES FOR SENSOR 2 */ +#define ST_ACCEL_2_WAI_EXP 0x32 +#define ST_ACCEL_2_ODR_ADDR 0x20 +#define ST_ACCEL_2_ODR_MASK 0x18 +#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00 +#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01 +#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02 +#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03 +#define ST_ACCEL_2_PW_ADDR 0x20 +#define ST_ACCEL_2_PW_MASK 0xe0 +#define ST_ACCEL_2_FS_ADDR 0x23 +#define ST_ACCEL_2_FS_MASK 0x30 +#define ST_ACCEL_2_FS_AVL_2_VAL 0X00 +#define ST_ACCEL_2_FS_AVL_4_VAL 0X01 +#define ST_ACCEL_2_FS_AVL_8_VAL 0x03 +#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000) +#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000) +#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900) +#define ST_ACCEL_2_BDU_ADDR 0x23 +#define ST_ACCEL_2_BDU_MASK 0x80 +#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22 +#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02 +#define ST_ACCEL_2_MULTIREAD_BIT true + +/* CUSTOM VALUES FOR SENSOR 3 */ +#define ST_ACCEL_3_WAI_EXP 0x40 +#define ST_ACCEL_3_ODR_ADDR 0x20 +#define ST_ACCEL_3_ODR_MASK 0xf0 +#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01 +#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02 +#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03 +#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04 +#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05 +#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06 +#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07 +#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08 +#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09 +#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a +#define ST_ACCEL_3_FS_ADDR 0x24 +#define ST_ACCEL_3_FS_MASK 0x38 +#define ST_ACCEL_3_FS_AVL_2_VAL 0X00 +#define ST_ACCEL_3_FS_AVL_4_VAL 0X01 +#define ST_ACCEL_3_FS_AVL_6_VAL 0x02 +#define ST_ACCEL_3_FS_AVL_8_VAL 0x03 +#define ST_ACCEL_3_FS_AVL_16_VAL 0x04 +#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61) +#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122) +#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183) +#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244) +#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732) +#define ST_ACCEL_3_BDU_ADDR 0x20 +#define ST_ACCEL_3_BDU_MASK 0x08 +#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23 +#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80 +#define ST_ACCEL_3_IG1_EN_ADDR 0x23 +#define ST_ACCEL_3_IG1_EN_MASK 0x08 +#define ST_ACCEL_3_MULTIREAD_BIT false + +static const struct iio_chan_spec st_accel_12bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE, + ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE, + ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE, + ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct iio_chan_spec st_accel_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct st_sensors st_accel_sensors[] = { + { + .wai = ST_ACCEL_1_WAI_EXP, + .sensors_supported = { + [0] = LIS3DH_ACCEL_DEV_NAME, + [1] = LSM303DLHC_ACCEL_DEV_NAME, + [2] = LSM330D_ACCEL_DEV_NAME, + [3] = LSM330DL_ACCEL_DEV_NAME, + [4] = LSM330DLC_ACCEL_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_accel_12bit_channels, + .odr = { + .addr = ST_ACCEL_1_ODR_ADDR, + .mask = ST_ACCEL_1_ODR_MASK, + .odr_avl = { + { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, }, + { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, }, + { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, }, + { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, }, + { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, }, + { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, }, + { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, }, + { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_ACCEL_1_ODR_ADDR, + .mask = ST_ACCEL_1_ODR_MASK, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = ST_ACCEL_1_FS_ADDR, + .mask = ST_ACCEL_1_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_ACCEL_FS_AVL_2G, + .value = ST_ACCEL_1_FS_AVL_2_VAL, + .gain = ST_ACCEL_1_FS_AVL_2_GAIN, + }, + [1] = { + .num = ST_ACCEL_FS_AVL_4G, + .value = ST_ACCEL_1_FS_AVL_4_VAL, + .gain = ST_ACCEL_1_FS_AVL_4_GAIN, + }, + [2] = { + .num = ST_ACCEL_FS_AVL_8G, + .value = ST_ACCEL_1_FS_AVL_8_VAL, + .gain = ST_ACCEL_1_FS_AVL_8_GAIN, + }, + [3] = { + .num = ST_ACCEL_FS_AVL_16G, + .value = ST_ACCEL_1_FS_AVL_16_VAL, + .gain = ST_ACCEL_1_FS_AVL_16_GAIN, + }, + }, + }, + .bdu = { + .addr = ST_ACCEL_1_BDU_ADDR, + .mask = ST_ACCEL_1_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_ACCEL_1_DRDY_IRQ_ADDR, + .mask = ST_ACCEL_1_DRDY_IRQ_MASK, + }, + .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, + .bootime = 2, + }, + { + .wai = ST_ACCEL_2_WAI_EXP, + .sensors_supported = { + [0] = LIS331DLH_ACCEL_DEV_NAME, + [1] = LSM303DL_ACCEL_DEV_NAME, + [2] = LSM303DLH_ACCEL_DEV_NAME, + [3] = LSM303DLM_ACCEL_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_accel_12bit_channels, + .odr = { + .addr = ST_ACCEL_2_ODR_ADDR, + .mask = ST_ACCEL_2_ODR_MASK, + .odr_avl = { + { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, }, + { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, }, + { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, }, + { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_ACCEL_2_PW_ADDR, + .mask = ST_ACCEL_2_PW_MASK, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = ST_ACCEL_2_FS_ADDR, + .mask = ST_ACCEL_2_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_ACCEL_FS_AVL_2G, + .value = ST_ACCEL_2_FS_AVL_2_VAL, + .gain = ST_ACCEL_2_FS_AVL_2_GAIN, + }, + [1] = { + .num = ST_ACCEL_FS_AVL_4G, + .value = ST_ACCEL_2_FS_AVL_4_VAL, + .gain = ST_ACCEL_2_FS_AVL_4_GAIN, + }, + [2] = { + .num = ST_ACCEL_FS_AVL_8G, + .value = ST_ACCEL_2_FS_AVL_8_VAL, + .gain = ST_ACCEL_2_FS_AVL_8_GAIN, + }, + }, + }, + .bdu = { + .addr = ST_ACCEL_2_BDU_ADDR, + .mask = ST_ACCEL_2_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_ACCEL_2_DRDY_IRQ_ADDR, + .mask = ST_ACCEL_2_DRDY_IRQ_MASK, + }, + .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, + .bootime = 2, + }, + { + .wai = ST_ACCEL_3_WAI_EXP, + .sensors_supported = { + [0] = LSM330_ACCEL_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_accel_16bit_channels, + .odr = { + .addr = ST_ACCEL_3_ODR_ADDR, + .mask = ST_ACCEL_3_ODR_MASK, + .odr_avl = { + { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL }, + { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, }, + { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, }, + { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, }, + { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, }, + { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, }, + { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, }, + { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, }, + { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, }, + { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_ACCEL_3_ODR_ADDR, + .mask = ST_ACCEL_3_ODR_MASK, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = ST_ACCEL_3_FS_ADDR, + .mask = ST_ACCEL_3_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_ACCEL_FS_AVL_2G, + .value = ST_ACCEL_3_FS_AVL_2_VAL, + .gain = ST_ACCEL_3_FS_AVL_2_GAIN, + }, + [1] = { + .num = ST_ACCEL_FS_AVL_4G, + .value = ST_ACCEL_3_FS_AVL_4_VAL, + .gain = ST_ACCEL_3_FS_AVL_4_GAIN, + }, + [2] = { + .num = ST_ACCEL_FS_AVL_6G, + .value = ST_ACCEL_3_FS_AVL_6_VAL, + .gain = ST_ACCEL_3_FS_AVL_6_GAIN, + }, + [3] = { + .num = ST_ACCEL_FS_AVL_8G, + .value = ST_ACCEL_3_FS_AVL_8_VAL, + .gain = ST_ACCEL_3_FS_AVL_8_GAIN, + }, + [4] = { + .num = ST_ACCEL_FS_AVL_16G, + .value = ST_ACCEL_3_FS_AVL_16_VAL, + .gain = ST_ACCEL_3_FS_AVL_16_GAIN, + }, + }, + }, + .bdu = { + .addr = ST_ACCEL_3_BDU_ADDR, + .mask = ST_ACCEL_3_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_ACCEL_3_DRDY_IRQ_ADDR, + .mask = ST_ACCEL_3_DRDY_IRQ_MASK, + .ig1 = { + .en_addr = ST_ACCEL_3_IG1_EN_ADDR, + .en_mask = ST_ACCEL_3_IG1_EN_MASK, + }, + }, + .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT, + .bootime = 2, + }, +}; + +static int st_accel_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + int err; + struct st_sensor_data *adata = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = st_sensors_read_info_raw(indio_dev, ch, val); + if (err < 0) + goto read_error; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = adata->current_fullscale->gain; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + +read_error: + return err; +} + +static int st_accel_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + int err; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + err = st_sensors_set_fullscale_by_gain(indio_dev, val2); + break; + default: + return -EINVAL; + } + + return err; +} + +static ST_SENSOR_DEV_ATTR_SAMP_FREQ(); +static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); +static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available); + +static struct attribute *st_accel_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_accel_scale_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_accel_attribute_group = { + .attrs = st_accel_attributes, +}; + +static const struct iio_info accel_info = { + .driver_module = THIS_MODULE, + .attrs = &st_accel_attribute_group, + .read_raw = &st_accel_read_raw, + .write_raw = &st_accel_write_raw, +}; + +static const struct iio_trigger_ops st_accel_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE, +}; + +int st_accel_common_probe(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *adata = iio_priv(indio_dev); + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &accel_info; + + err = st_sensors_check_device_support(indio_dev, + ARRAY_SIZE(st_accel_sensors), st_accel_sensors); + if (err < 0) + goto st_accel_common_probe_error; + + adata->multiread_bit = adata->sensor->multi_read_bit; + indio_dev->channels = adata->sensor->ch; + indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; + + adata->current_fullscale = (struct st_sensor_fullscale_avl *) + &adata->sensor->fs.fs_avl[0]; + adata->odr = adata->sensor->odr.odr_avl[0].hz; + + err = st_sensors_init_sensor(indio_dev); + if (err < 0) + goto st_accel_common_probe_error; + + if (adata->get_irq_data_ready(indio_dev) > 0) { + err = st_accel_allocate_ring(indio_dev); + if (err < 0) + goto st_accel_common_probe_error; + + err = st_sensors_allocate_trigger(indio_dev, + &st_accel_trigger_ops); + if (err < 0) + goto st_accel_probe_trigger_error; + } + + err = iio_device_register(indio_dev); + if (err) + goto st_accel_device_register_error; + + return err; + +st_accel_device_register_error: + if (adata->get_irq_data_ready(indio_dev) > 0) + st_sensors_deallocate_trigger(indio_dev); +st_accel_probe_trigger_error: + if (adata->get_irq_data_ready(indio_dev) > 0) + st_accel_deallocate_ring(indio_dev); +st_accel_common_probe_error: + return err; +} +EXPORT_SYMBOL(st_accel_common_probe); + +void st_accel_common_remove(struct iio_dev *indio_dev) +{ + struct st_sensor_data *adata = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + if (adata->get_irq_data_ready(indio_dev) > 0) { + st_sensors_deallocate_trigger(indio_dev); + st_accel_deallocate_ring(indio_dev); + } + iio_device_free(indio_dev); +} +EXPORT_SYMBOL(st_accel_common_remove); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics accelerometers driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c new file mode 100644 index 00000000000..90b8ddfb61e --- /dev/null +++ b/drivers/iio/accel/st_accel_i2c.c @@ -0,0 +1,87 @@ +/* + * STMicroelectronics accelerometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_i2c.h> +#include "st_accel.h" + +static int st_accel_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *adata; + int err; + + indio_dev = iio_device_alloc(sizeof(*adata)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto iio_device_alloc_error; + } + + adata = iio_priv(indio_dev); + adata->dev = &client->dev; + + st_sensors_i2c_configure(indio_dev, client, adata); + + err = st_accel_common_probe(indio_dev); + if (err < 0) + goto st_accel_common_probe_error; + + return 0; + +st_accel_common_probe_error: + iio_device_free(indio_dev); +iio_device_alloc_error: + return err; +} + +static int st_accel_i2c_remove(struct i2c_client *client) +{ + st_accel_common_remove(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id st_accel_id_table[] = { + { LSM303DLH_ACCEL_DEV_NAME }, + { LSM303DLHC_ACCEL_DEV_NAME }, + { LIS3DH_ACCEL_DEV_NAME }, + { LSM330D_ACCEL_DEV_NAME }, + { LSM330DL_ACCEL_DEV_NAME }, + { LSM330DLC_ACCEL_DEV_NAME }, + { LIS331DLH_ACCEL_DEV_NAME }, + { LSM303DL_ACCEL_DEV_NAME }, + { LSM303DLM_ACCEL_DEV_NAME }, + { LSM330_ACCEL_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_accel_id_table); + +static struct i2c_driver st_accel_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "st-accel-i2c", + }, + .probe = st_accel_i2c_probe, + .remove = st_accel_i2c_remove, + .id_table = st_accel_id_table, +}; +module_i2c_driver(st_accel_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c new file mode 100644 index 00000000000..dbd45c08711 --- /dev/null +++ b/drivers/iio/accel/st_accel_spi.c @@ -0,0 +1,86 @@ +/* + * STMicroelectronics accelerometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_spi.h> +#include "st_accel.h" + +static int st_accel_spi_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *adata; + int err; + + indio_dev = iio_device_alloc(sizeof(*adata)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto iio_device_alloc_error; + } + + adata = iio_priv(indio_dev); + adata->dev = &spi->dev; + + st_sensors_spi_configure(indio_dev, spi, adata); + + err = st_accel_common_probe(indio_dev); + if (err < 0) + goto st_accel_common_probe_error; + + return 0; + +st_accel_common_probe_error: + iio_device_free(indio_dev); +iio_device_alloc_error: + return err; +} + +static int st_accel_spi_remove(struct spi_device *spi) +{ + st_accel_common_remove(spi_get_drvdata(spi)); + + return 0; +} + +static const struct spi_device_id st_accel_id_table[] = { + { LSM303DLH_ACCEL_DEV_NAME }, + { LSM303DLHC_ACCEL_DEV_NAME }, + { LIS3DH_ACCEL_DEV_NAME }, + { LSM330D_ACCEL_DEV_NAME }, + { LSM330DL_ACCEL_DEV_NAME }, + { LSM330DLC_ACCEL_DEV_NAME }, + { LIS331DLH_ACCEL_DEV_NAME }, + { LSM303DL_ACCEL_DEV_NAME }, + { LSM303DLM_ACCEL_DEV_NAME }, + { LSM330_ACCEL_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_accel_id_table); + +static struct spi_driver st_accel_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "st-accel-spi", + }, + .probe = st_accel_spi_probe, + .remove = st_accel_spi_remove, + .id_table = st_accel_id_table, +}; +module_spi_driver(st_accel_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/lp8788_adc.c b/drivers/iio/adc/lp8788_adc.c index f8bcb1f5892..763f57565ee 100644 --- a/drivers/iio/adc/lp8788_adc.c +++ b/drivers/iio/adc/lp8788_adc.c @@ -187,12 +187,6 @@ static int lp8788_iio_map_register(struct iio_dev *indio_dev, return 0; } -static inline void lp8788_iio_map_unregister(struct iio_dev *indio_dev, - struct lp8788_adc *adc) -{ - iio_map_array_unregister(indio_dev, adc->map); -} - static int lp8788_adc_probe(struct platform_device *pdev) { struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); @@ -208,6 +202,7 @@ static int lp8788_adc_probe(struct platform_device *pdev) adc->lp = lp; platform_set_drvdata(pdev, indio_dev); + indio_dev->dev.of_node = pdev->dev.of_node; ret = lp8788_iio_map_register(indio_dev, lp->pdata, adc); if (ret) goto err_iio_map; @@ -230,7 +225,7 @@ static int lp8788_adc_probe(struct platform_device *pdev) return 0; err_iio_device: - lp8788_iio_map_unregister(indio_dev, adc); + iio_map_array_unregister(indio_dev); err_iio_map: iio_device_free(indio_dev); return ret; @@ -239,10 +234,9 @@ err_iio_map: static int lp8788_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); - struct lp8788_adc *adc = iio_priv(indio_dev); iio_device_unregister(indio_dev); - lp8788_iio_map_unregister(indio_dev, adc); + iio_map_array_unregister(indio_dev); iio_device_free(indio_dev); return 0; diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 5db56f5ce7d..08e4feb4f6e 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -335,7 +335,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, { int ret = 0; s32 data; - char rxbuf[2]; + u8 rxbuf[2]; struct max1363_state *st = iio_priv(indio_dev); struct i2c_client *client = st->client; @@ -367,7 +367,8 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, ret = data; goto error_ret; } - data = (s32)(rxbuf[1]) | ((s32)(rxbuf[0] & 0x0F)) << 8; + data = (rxbuf[1] | rxbuf[0] << 8) & + ((1 << st->chip_info->bits) - 1); } else { /* Get reading */ data = i2c_master_recv(client, rxbuf, 1); @@ -1496,6 +1497,7 @@ static int max1363_probe(struct i2c_client *client, goto error_out; } + indio_dev->dev.of_node = client->dev.of_node; ret = iio_map_array_register(indio_dev, client->dev.platform_data); if (ret < 0) goto error_free_device; @@ -1529,8 +1531,6 @@ static int max1363_probe(struct i2c_client *client, indio_dev->num_channels = st->chip_info->num_channels; indio_dev->info = st->chip_info->info; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = st->chip_info->channels; - indio_dev->num_channels = st->chip_info->num_channels; ret = max1363_initial_setup(st); if (ret < 0) goto error_free_available_scan_masks; @@ -1569,7 +1569,7 @@ error_disable_reg: error_put_reg: regulator_put(st->reg); error_unregister_map: - iio_map_array_unregister(indio_dev, client->dev.platform_data); + iio_map_array_unregister(indio_dev); error_free_device: iio_device_free(indio_dev); error_out: @@ -1588,7 +1588,7 @@ static int max1363_remove(struct i2c_client *client) kfree(indio_dev->available_scan_masks); regulator_disable(st->reg); regulator_put(st->reg); - iio_map_array_unregister(indio_dev, client->dev.platform_data); + iio_map_array_unregister(indio_dev); iio_device_free(indio_dev); return 0; diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c index 4d40e24f372..9201022945e 100644 --- a/drivers/iio/buffer_cb.c +++ b/drivers/iio/buffer_cb.c @@ -25,7 +25,7 @@ static struct iio_buffer_access_funcs iio_cb_access = { .store_to = &iio_buffer_cb_store_to, }; -struct iio_cb_buffer *iio_channel_get_all_cb(const char *name, +struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, int (*cb)(u8 *data, void *private), void *private) @@ -46,7 +46,7 @@ struct iio_cb_buffer *iio_channel_get_all_cb(const char *name, cb_buff->buffer.access = &iio_cb_access; INIT_LIST_HEAD(&cb_buff->buffer.demux_list); - cb_buff->channels = iio_channel_get_all(name); + cb_buff->channels = iio_channel_get_all(dev); if (IS_ERR(cb_buff->channels)) { ret = PTR_ERR(cb_buff->channels); goto error_free_cb_buff; diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig index ed45ee54500..0b6e97d18fa 100644 --- a/drivers/iio/common/Kconfig +++ b/drivers/iio/common/Kconfig @@ -3,3 +3,4 @@ # source "drivers/iio/common/hid-sensors/Kconfig" +source "drivers/iio/common/st_sensors/Kconfig" diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile index 81584009b21..c2352beb5d9 100644 --- a/drivers/iio/common/Makefile +++ b/drivers/iio/common/Makefile @@ -7,3 +7,4 @@ # obj-y += hid-sensors/ +obj-y += st_sensors/ diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig new file mode 100644 index 00000000000..865f1ca33eb --- /dev/null +++ b/drivers/iio/common/st_sensors/Kconfig @@ -0,0 +1,14 @@ +# +# STMicroelectronics sensors common library +# + +config IIO_ST_SENSORS_I2C + tristate + +config IIO_ST_SENSORS_SPI + tristate + +config IIO_ST_SENSORS_CORE + tristate + select IIO_ST_SENSORS_I2C if I2C + select IIO_ST_SENSORS_SPI if SPI_MASTER diff --git a/drivers/iio/common/st_sensors/Makefile b/drivers/iio/common/st_sensors/Makefile new file mode 100644 index 00000000000..9f3e24f3024 --- /dev/null +++ b/drivers/iio/common/st_sensors/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the STMicroelectronics sensor common modules. +# + +obj-$(CONFIG_IIO_ST_SENSORS_I2C) += st_sensors_i2c.o +obj-$(CONFIG_IIO_ST_SENSORS_SPI) += st_sensors_spi.o +obj-$(CONFIG_IIO_ST_SENSORS_CORE) += st_sensors.o +st_sensors-y := st_sensors_core.o +st_sensors-$(CONFIG_IIO_BUFFER) += st_sensors_buffer.o +st_sensors-$(CONFIG_IIO_TRIGGER) += st_sensors_trigger.o diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c new file mode 100644 index 00000000000..09b236d6ee8 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c @@ -0,0 +1,116 @@ +/* + * STMicroelectronics sensors buffer library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/interrupt.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/irqreturn.h> + +#include <linux/iio/common/st_sensors.h> + + +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf) +{ + int i, n = 0, len; + u8 addr[ST_SENSORS_NUMBER_DATA_CHANNELS]; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++) { + if (test_bit(i, indio_dev->active_scan_mask)) { + addr[n] = indio_dev->channels[i].address; + n++; + } + } + switch (n) { + case 1: + len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, + addr[0], ST_SENSORS_BYTE_FOR_CHANNEL, buf, + sdata->multiread_bit); + break; + case 2: + if ((addr[1] - addr[0]) == ST_SENSORS_BYTE_FOR_CHANNEL) { + len = sdata->tf->read_multiple_byte(&sdata->tb, + sdata->dev, addr[0], + ST_SENSORS_BYTE_FOR_CHANNEL*n, + buf, sdata->multiread_bit); + } else { + u8 rx_array[ST_SENSORS_BYTE_FOR_CHANNEL* + ST_SENSORS_NUMBER_DATA_CHANNELS]; + len = sdata->tf->read_multiple_byte(&sdata->tb, + sdata->dev, addr[0], + ST_SENSORS_BYTE_FOR_CHANNEL* + ST_SENSORS_NUMBER_DATA_CHANNELS, + rx_array, sdata->multiread_bit); + if (len < 0) + goto read_data_channels_error; + + for (i = 0; i < n * ST_SENSORS_NUMBER_DATA_CHANNELS; + i++) { + if (i < n) + buf[i] = rx_array[i]; + else + buf[i] = rx_array[n + i]; + } + len = ST_SENSORS_BYTE_FOR_CHANNEL*n; + } + break; + case 3: + len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, + addr[0], ST_SENSORS_BYTE_FOR_CHANNEL* + ST_SENSORS_NUMBER_DATA_CHANNELS, + buf, sdata->multiread_bit); + break; + default: + len = -EINVAL; + goto read_data_channels_error; + } + if (len != ST_SENSORS_BYTE_FOR_CHANNEL*n) { + len = -EIO; + goto read_data_channels_error; + } + +read_data_channels_error: + return len; +} +EXPORT_SYMBOL(st_sensors_get_buffer_element); + +irqreturn_t st_sensors_trigger_handler(int irq, void *p) +{ + int len; + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data); + if (len < 0) + goto st_sensors_get_buffer_element_error; + + if (indio_dev->scan_timestamp) + *(s64 *)((u8 *)sdata->buffer_data + + ALIGN(len, sizeof(s64))) = pf->timestamp; + + iio_push_to_buffers(indio_dev, sdata->buffer_data); + +st_sensors_get_buffer_element_error: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(st_sensors_trigger_handler); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics ST-sensors buffer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c new file mode 100644 index 00000000000..0198324a8b0 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -0,0 +1,446 @@ +/* + * STMicroelectronics sensors core library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <asm/unaligned.h> + +#include <linux/iio/common/st_sensors.h> + + +#define ST_SENSORS_WAI_ADDRESS 0x0f + +static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data) +{ + int err; + u8 new_data; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + err = sdata->tf->read_byte(&sdata->tb, sdata->dev, reg_addr, &new_data); + if (err < 0) + goto st_sensors_write_data_with_mask_error; + + new_data = ((new_data & (~mask)) | ((data << __ffs(mask)) & mask)); + err = sdata->tf->write_byte(&sdata->tb, sdata->dev, reg_addr, new_data); + +st_sensors_write_data_with_mask_error: + return err; +} + +static int st_sensors_match_odr(struct st_sensors *sensor, + unsigned int odr, struct st_sensor_odr_avl *odr_out) +{ + int i, ret = -EINVAL; + + for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) { + if (sensor->odr.odr_avl[i].hz == 0) + goto st_sensors_match_odr_error; + + if (sensor->odr.odr_avl[i].hz == odr) { + odr_out->hz = sensor->odr.odr_avl[i].hz; + odr_out->value = sensor->odr.odr_avl[i].value; + ret = 0; + break; + } + } + +st_sensors_match_odr_error: + return ret; +} + +int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr) +{ + int err; + struct st_sensor_odr_avl odr_out; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + err = st_sensors_match_odr(sdata->sensor, odr, &odr_out); + if (err < 0) + goto st_sensors_match_odr_error; + + if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) && + (sdata->sensor->odr.mask == sdata->sensor->pw.mask)) { + if (sdata->enabled == true) { + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->odr.addr, + sdata->sensor->odr.mask, + odr_out.value); + } else { + err = 0; + } + } else { + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->odr.addr, sdata->sensor->odr.mask, + odr_out.value); + } + if (err >= 0) + sdata->odr = odr_out.hz; + +st_sensors_match_odr_error: + return err; +} +EXPORT_SYMBOL(st_sensors_set_odr); + +static int st_sensors_match_fs(struct st_sensors *sensor, + unsigned int fs, int *index_fs_avl) +{ + int i, ret = -EINVAL; + + for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) { + if (sensor->fs.fs_avl[i].num == 0) + goto st_sensors_match_odr_error; + + if (sensor->fs.fs_avl[i].num == fs) { + *index_fs_avl = i; + ret = 0; + break; + } + } + +st_sensors_match_odr_error: + return ret; +} + +static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs) +{ + int err, i; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + err = st_sensors_match_fs(sdata->sensor, fs, &i); + if (err < 0) + goto st_accel_set_fullscale_error; + + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->fs.addr, + sdata->sensor->fs.mask, + sdata->sensor->fs.fs_avl[i].value); + if (err < 0) + goto st_accel_set_fullscale_error; + + sdata->current_fullscale = (struct st_sensor_fullscale_avl *) + &sdata->sensor->fs.fs_avl[i]; + return err; + +st_accel_set_fullscale_error: + dev_err(&indio_dev->dev, "failed to set new fullscale.\n"); + return err; +} + +int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable) +{ + bool found; + u8 tmp_value; + int err = -EINVAL; + struct st_sensor_odr_avl odr_out; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + if (enable) { + found = false; + tmp_value = sdata->sensor->pw.value_on; + if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) && + (sdata->sensor->odr.mask == sdata->sensor->pw.mask)) { + err = st_sensors_match_odr(sdata->sensor, + sdata->odr, &odr_out); + if (err < 0) + goto set_enable_error; + tmp_value = odr_out.value; + found = true; + } + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->pw.addr, + sdata->sensor->pw.mask, tmp_value); + if (err < 0) + goto set_enable_error; + + sdata->enabled = true; + + if (found) + sdata->odr = odr_out.hz; + } else { + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->pw.addr, + sdata->sensor->pw.mask, + sdata->sensor->pw.value_off); + if (err < 0) + goto set_enable_error; + + sdata->enabled = false; + } + +set_enable_error: + return err; +} +EXPORT_SYMBOL(st_sensors_set_enable); + +int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable) +{ + struct st_sensor_data *sdata = iio_priv(indio_dev); + + return st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->enable_axis.addr, + sdata->sensor->enable_axis.mask, axis_enable); +} +EXPORT_SYMBOL(st_sensors_set_axis_enable); + +int st_sensors_init_sensor(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + mutex_init(&sdata->tb.buf_lock); + + err = st_sensors_set_enable(indio_dev, false); + if (err < 0) + goto init_error; + + err = st_sensors_set_fullscale(indio_dev, + sdata->current_fullscale->num); + if (err < 0) + goto init_error; + + err = st_sensors_set_odr(indio_dev, sdata->odr); + if (err < 0) + goto init_error; + + /* set BDU */ + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->bdu.addr, sdata->sensor->bdu.mask, true); + if (err < 0) + goto init_error; + + err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS); + +init_error: + return err; +} +EXPORT_SYMBOL(st_sensors_init_sensor); + +int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable) +{ + int err; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + /* Enable/Disable the interrupt generator 1. */ + if (sdata->sensor->drdy_irq.ig1.en_addr > 0) { + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->drdy_irq.ig1.en_addr, + sdata->sensor->drdy_irq.ig1.en_mask, (int)enable); + if (err < 0) + goto st_accel_set_dataready_irq_error; + } + + /* Enable/Disable the interrupt generator for data ready. */ + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor->drdy_irq.addr, + sdata->sensor->drdy_irq.mask, (int)enable); + +st_accel_set_dataready_irq_error: + return err; +} +EXPORT_SYMBOL(st_sensors_set_dataready_irq); + +int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale) +{ + int err = -EINVAL, i; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) { + if ((sdata->sensor->fs.fs_avl[i].gain == scale) && + (sdata->sensor->fs.fs_avl[i].gain != 0)) { + err = 0; + break; + } + } + if (err < 0) + goto st_sensors_match_scale_error; + + err = st_sensors_set_fullscale(indio_dev, + sdata->sensor->fs.fs_avl[i].num); + +st_sensors_match_scale_error: + return err; +} +EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain); + +static int st_sensors_read_axis_data(struct iio_dev *indio_dev, + u8 ch_addr, int *data) +{ + int err; + u8 outdata[ST_SENSORS_BYTE_FOR_CHANNEL]; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + err = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, + ch_addr, ST_SENSORS_BYTE_FOR_CHANNEL, + outdata, sdata->multiread_bit); + if (err < 0) + goto read_error; + + *data = (s16)get_unaligned_le16(outdata); + +read_error: + return err; +} + +int st_sensors_read_info_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val) +{ + int err; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { + err = -EBUSY; + goto read_error; + } else { + err = st_sensors_set_enable(indio_dev, true); + if (err < 0) + goto read_error; + + msleep((sdata->sensor->bootime * 1000) / sdata->odr); + err = st_sensors_read_axis_data(indio_dev, ch->address, val); + if (err < 0) + goto read_error; + + *val = *val >> ch->scan_type.shift; + } + mutex_unlock(&indio_dev->mlock); + + return err; + +read_error: + mutex_unlock(&indio_dev->mlock); + return err; +} +EXPORT_SYMBOL(st_sensors_read_info_raw); + +int st_sensors_check_device_support(struct iio_dev *indio_dev, + int num_sensors_list, const struct st_sensors *sensors) +{ + u8 wai; + int i, n, err; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + err = sdata->tf->read_byte(&sdata->tb, sdata->dev, + ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai); + if (err < 0) { + dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n"); + goto read_wai_error; + } + + for (i = 0; i < num_sensors_list; i++) { + if (sensors[i].wai == wai) + break; + } + if (i == num_sensors_list) + goto device_not_supported; + + for (n = 0; n < ARRAY_SIZE(sensors[i].sensors_supported); n++) { + if (strcmp(indio_dev->name, + &sensors[i].sensors_supported[n][0]) == 0) + break; + } + if (n == ARRAY_SIZE(sensors[i].sensors_supported)) { + dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n"); + goto sensor_name_mismatch; + } + + sdata->sensor = (struct st_sensors *)&sensors[i]; + + return i; + +device_not_supported: + dev_err(&indio_dev->dev, "device not supported: WhoAmI (0x%x).\n", wai); +sensor_name_mismatch: + err = -ENODEV; +read_wai_error: + return err; +} +EXPORT_SYMBOL(st_sensors_check_device_support); + +ssize_t st_sensors_sysfs_get_sampling_frequency(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct st_sensor_data *adata = iio_priv(dev_get_drvdata(dev)); + + return sprintf(buf, "%d\n", adata->odr); +} +EXPORT_SYMBOL(st_sensors_sysfs_get_sampling_frequency); + +ssize_t st_sensors_sysfs_set_sampling_frequency(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + int err; + unsigned int odr; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + + err = kstrtoint(buf, 10, &odr); + if (err < 0) + goto conversion_error; + + mutex_lock(&indio_dev->mlock); + err = st_sensors_set_odr(indio_dev, odr); + mutex_unlock(&indio_dev->mlock); + +conversion_error: + return err < 0 ? err : size; +} +EXPORT_SYMBOL(st_sensors_sysfs_set_sampling_frequency); + +ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int i, len = 0; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct st_sensor_data *sdata = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) { + if (sdata->sensor->odr.odr_avl[i].hz == 0) + break; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + sdata->sensor->odr.odr_avl[i].hz); + } + mutex_unlock(&indio_dev->mlock); + buf[len - 1] = '\n'; + + return len; +} +EXPORT_SYMBOL(st_sensors_sysfs_sampling_frequency_avail); + +ssize_t st_sensors_sysfs_scale_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int i, len = 0; + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct st_sensor_data *sdata = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) { + if (sdata->sensor->fs.fs_avl[i].num == 0) + break; + + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + sdata->sensor->fs.fs_avl[i].gain); + } + mutex_unlock(&indio_dev->mlock); + buf[len - 1] = '\n'; + + return len; +} +EXPORT_SYMBOL(st_sensors_sysfs_scale_avail); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics ST-sensors core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c new file mode 100644 index 00000000000..38af9440c10 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c @@ -0,0 +1,81 @@ +/* + * STMicroelectronics sensors i2c library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/iio/iio.h> + +#include <linux/iio/common/st_sensors_i2c.h> + + +#define ST_SENSORS_I2C_MULTIREAD 0x80 + +static unsigned int st_sensors_i2c_get_irq(struct iio_dev *indio_dev) +{ + struct st_sensor_data *sdata = iio_priv(indio_dev); + + return to_i2c_client(sdata->dev)->irq; +} + +static int st_sensors_i2c_read_byte(struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 *res_byte) +{ + int err; + + err = i2c_smbus_read_byte_data(to_i2c_client(dev), reg_addr); + if (err < 0) + goto st_accel_i2c_read_byte_error; + + *res_byte = err & 0xff; + +st_accel_i2c_read_byte_error: + return err < 0 ? err : 0; +} + +static int st_sensors_i2c_read_multiple_byte( + struct st_sensor_transfer_buffer *tb, struct device *dev, + u8 reg_addr, int len, u8 *data, bool multiread_bit) +{ + if (multiread_bit) + reg_addr |= ST_SENSORS_I2C_MULTIREAD; + + return i2c_smbus_read_i2c_block_data(to_i2c_client(dev), + reg_addr, len, data); +} + +static int st_sensors_i2c_write_byte(struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 data) +{ + return i2c_smbus_write_byte_data(to_i2c_client(dev), reg_addr, data); +} + +static const struct st_sensor_transfer_function st_sensors_tf_i2c = { + .read_byte = st_sensors_i2c_read_byte, + .write_byte = st_sensors_i2c_write_byte, + .read_multiple_byte = st_sensors_i2c_read_multiple_byte, +}; + +void st_sensors_i2c_configure(struct iio_dev *indio_dev, + struct i2c_client *client, struct st_sensor_data *sdata) +{ + i2c_set_clientdata(client, indio_dev); + + indio_dev->dev.parent = &client->dev; + indio_dev->name = client->name; + + sdata->tf = &st_sensors_tf_i2c; + sdata->get_irq_data_ready = st_sensors_i2c_get_irq; +} +EXPORT_SYMBOL(st_sensors_i2c_configure); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics ST-sensors i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c new file mode 100644 index 00000000000..f0aa2f10522 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_spi.c @@ -0,0 +1,128 @@ +/* + * STMicroelectronics sensors spi library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/iio/iio.h> + +#include <linux/iio/common/st_sensors_spi.h> + + +#define ST_SENSORS_SPI_MULTIREAD 0xc0 +#define ST_SENSORS_SPI_READ 0x80 + +static unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev) +{ + struct st_sensor_data *sdata = iio_priv(indio_dev); + + return to_spi_device(sdata->dev)->irq; +} + +static int st_sensors_spi_read(struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit) +{ + struct spi_message msg; + int err; + + struct spi_transfer xfers[] = { + { + .tx_buf = tb->tx_buf, + .bits_per_word = 8, + .len = 1, + }, + { + .rx_buf = tb->rx_buf, + .bits_per_word = 8, + .len = len, + } + }; + + mutex_lock(&tb->buf_lock); + if ((multiread_bit) && (len > 1)) + tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_MULTIREAD; + else + tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_READ; + + spi_message_init(&msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); + err = spi_sync(to_spi_device(dev), &msg); + if (err) + goto acc_spi_read_error; + + memcpy(data, tb->rx_buf, len*sizeof(u8)); + mutex_unlock(&tb->buf_lock); + return len; + +acc_spi_read_error: + mutex_unlock(&tb->buf_lock); + return err; +} + +static int st_sensors_spi_read_byte(struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 *res_byte) +{ + return st_sensors_spi_read(tb, dev, reg_addr, 1, res_byte, false); +} + +static int st_sensors_spi_read_multiple_byte( + struct st_sensor_transfer_buffer *tb, struct device *dev, + u8 reg_addr, int len, u8 *data, bool multiread_bit) +{ + return st_sensors_spi_read(tb, dev, reg_addr, len, data, multiread_bit); +} + +static int st_sensors_spi_write_byte(struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 data) +{ + struct spi_message msg; + int err; + + struct spi_transfer xfers = { + .tx_buf = tb->tx_buf, + .bits_per_word = 8, + .len = 2, + }; + + mutex_lock(&tb->buf_lock); + tb->tx_buf[0] = reg_addr; + tb->tx_buf[1] = data; + + spi_message_init(&msg); + spi_message_add_tail(&xfers, &msg); + err = spi_sync(to_spi_device(dev), &msg); + mutex_unlock(&tb->buf_lock); + + return err; +} + +static const struct st_sensor_transfer_function st_sensors_tf_spi = { + .read_byte = st_sensors_spi_read_byte, + .write_byte = st_sensors_spi_write_byte, + .read_multiple_byte = st_sensors_spi_read_multiple_byte, +}; + +void st_sensors_spi_configure(struct iio_dev *indio_dev, + struct spi_device *spi, struct st_sensor_data *sdata) +{ + spi_set_drvdata(spi, indio_dev); + + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi->modalias; + + sdata->tf = &st_sensors_tf_spi; + sdata->get_irq_data_ready = st_sensors_spi_get_irq; +} +EXPORT_SYMBOL(st_sensors_spi_configure); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics ST-sensors spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c new file mode 100644 index 00000000000..139ed030abb --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -0,0 +1,77 @@ +/* + * STMicroelectronics sensors trigger library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/interrupt.h> + +#include <linux/iio/common/st_sensors.h> + + +int st_sensors_allocate_trigger(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops) +{ + int err; + struct st_sensor_data *sdata = iio_priv(indio_dev); + + sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name); + if (sdata->trig == NULL) { + err = -ENOMEM; + dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); + goto iio_trigger_alloc_error; + } + + err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + iio_trigger_generic_data_rdy_poll, + NULL, + IRQF_TRIGGER_RISING, + sdata->trig->name, + sdata->trig); + if (err) + goto request_irq_error; + + sdata->trig->private_data = indio_dev; + sdata->trig->ops = trigger_ops; + sdata->trig->dev.parent = sdata->dev; + + err = iio_trigger_register(sdata->trig); + if (err < 0) { + dev_err(&indio_dev->dev, "failed to register iio trigger.\n"); + goto iio_trigger_register_error; + } + indio_dev->trig = sdata->trig; + + return 0; + +iio_trigger_register_error: + free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig); +request_irq_error: + iio_trigger_free(sdata->trig); +iio_trigger_alloc_error: + return err; +} +EXPORT_SYMBOL(st_sensors_allocate_trigger); + +void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) +{ + struct st_sensor_data *sdata = iio_priv(indio_dev); + + iio_trigger_unregister(sdata->trig); + free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig); + iio_trigger_free(sdata->trig); +} +EXPORT_SYMBOL(st_sensors_deallocate_trigger); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 752ac8a3448..6be4628faff 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -19,6 +19,16 @@ config ADIS16136 Say yes here to build support for the Analog Devices ADIS16133, ADIS16135, ADIS16136 gyroscope devices. +config ADXRS450 + tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver" + depends on SPI + help + Say yes here to build support for Analog Devices ADXRS450 and ADXRS453 + programmable digital output gyroscope. + + This driver can also be built as a module. If so, the module + will be called adxrs450. + config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUB select IIO_BUFFER @@ -30,4 +40,42 @@ config HID_SENSOR_GYRO_3D Say yes here to build support for the HID SENSOR Gyroscope 3D. +config IIO_ST_GYRO_3AXIS + tristate "STMicroelectronics gyroscopes 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_GYRO_I2C_3AXIS if (I2C) + select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + select IIO_ST_GYRO_BUFFER if (IIO_TRIGGERED_BUFFER) + help + Say yes here to build support for STMicroelectronics gyroscopes: + L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330. + + This driver can also be built as a module. If so, will be created + these modules: + - st_gyro (core functions for the driver [it is mandatory]); + - st_gyro_i2c (necessary for the I2C devices [optional*]); + - st_gyro_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_GYRO_I2C_3AXIS + tristate + depends on IIO_ST_GYRO_3AXIS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_GYRO_SPI_3AXIS + tristate + depends on IIO_ST_GYRO_3AXIS + depends on IIO_ST_SENSORS_SPI + +config ITG3200 + tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver" + depends on I2C + select IIO_TRIGGERED_BUFFER if IIO_BUFFER + help + Say yes here to add support for the InvenSense ITG3200 digital + 3-axis gyroscope sensor. + endmenu diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index 9b090ee084d..225d289082e 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -4,4 +4,17 @@ obj-$(CONFIG_ADIS16080) += adis16080.o obj-$(CONFIG_ADIS16136) += adis16136.o +obj-$(CONFIG_ADXRS450) += adxrs450.o + obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o + +itg3200-y := itg3200_core.o +itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o +obj-$(CONFIG_ITG3200) += itg3200.o + +obj-$(CONFIG_IIO_ST_GYRO_3AXIS) += st_gyro.o +st_gyro-y := st_gyro_core.o +st_gyro-$(CONFIG_IIO_BUFFER) += st_gyro_buffer.o + +obj-$(CONFIG_IIO_ST_GYRO_I2C_3AXIS) += st_gyro_i2c.o +obj-$(CONFIG_IIO_ST_GYRO_SPI_3AXIS) += st_gyro_spi.o diff --git a/drivers/staging/iio/gyro/adxrs450_core.c b/drivers/iio/gyro/adxrs450.c index f0ce81da8ac..d9d43831c38 100644 --- a/drivers/staging/iio/gyro/adxrs450_core.c +++ b/drivers/iio/gyro/adxrs450.c @@ -21,45 +21,110 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> -#include "adxrs450.h" +#define ADXRS450_STARTUP_DELAY 50 /* ms */ + +/* The MSB for the spi commands */ +#define ADXRS450_SENSOR_DATA (0x20 << 24) +#define ADXRS450_WRITE_DATA (0x40 << 24) +#define ADXRS450_READ_DATA (0x80 << 24) + +#define ADXRS450_RATE1 0x00 /* Rate Registers */ +#define ADXRS450_TEMP1 0x02 /* Temperature Registers */ +#define ADXRS450_LOCST1 0x04 /* Low CST Memory Registers */ +#define ADXRS450_HICST1 0x06 /* High CST Memory Registers */ +#define ADXRS450_QUAD1 0x08 /* Quad Memory Registers */ +#define ADXRS450_FAULT1 0x0A /* Fault Registers */ +#define ADXRS450_PID1 0x0C /* Part ID Register 1 */ +#define ADXRS450_SNH 0x0E /* Serial Number Registers, 4 bytes */ +#define ADXRS450_SNL 0x10 +#define ADXRS450_DNC1 0x12 /* Dynamic Null Correction Registers */ +/* Check bits */ +#define ADXRS450_P 0x01 +#define ADXRS450_CHK 0x02 +#define ADXRS450_CST 0x04 +#define ADXRS450_PWR 0x08 +#define ADXRS450_POR 0x10 +#define ADXRS450_NVM 0x20 +#define ADXRS450_Q 0x40 +#define ADXRS450_PLL 0x80 +#define ADXRS450_UV 0x100 +#define ADXRS450_OV 0x200 +#define ADXRS450_AMP 0x400 +#define ADXRS450_FAIL 0x800 + +#define ADXRS450_WRERR_MASK (0x7 << 29) + +#define ADXRS450_MAX_RX 4 +#define ADXRS450_MAX_TX 4 + +#define ADXRS450_GET_ST(a) ((a >> 26) & 0x3) + +enum { + ID_ADXRS450, + ID_ADXRS453, +}; + +/** + * struct adxrs450_state - device instance specific data + * @us: actual spi_device + * @buf_lock: mutex to protect tx and rx + * @tx: transmit buffer + * @rx: receive buffer + **/ +struct adxrs450_state { + struct spi_device *us; + struct mutex buf_lock; + __be32 tx ____cacheline_aligned; + __be32 rx; + +}; /** * adxrs450_spi_read_reg_16() - read 2 bytes from a register pair - * @dev: device associated with child of actual iio_dev - * @reg_address: the address of the lower of the two registers,which should be an even address, - * Second register's address is reg_address + 1. + * @indio_dev: device associated with child of actual iio_dev + * @reg_address: the address of the lower of the two registers, which should be + * an even address, the second register's address is reg_address + 1. * @val: somewhere to pass back the value read **/ static int adxrs450_spi_read_reg_16(struct iio_dev *indio_dev, u8 reg_address, u16 *val) { + struct spi_message msg; struct adxrs450_state *st = iio_priv(indio_dev); + u32 tx; int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = &st->tx, + .bits_per_word = 8, + .len = sizeof(st->tx), + .cs_change = 1, + }, { + .rx_buf = &st->rx, + .bits_per_word = 8, + .len = sizeof(st->rx), + }, + }; mutex_lock(&st->buf_lock); - st->tx[0] = ADXRS450_READ_DATA | (reg_address >> 7); - st->tx[1] = reg_address << 1; - st->tx[2] = 0; - st->tx[3] = 0; + tx = ADXRS450_READ_DATA | (reg_address << 17); - if (!(hweight32(be32_to_cpu(*(u32 *)st->tx)) & 1)) - st->tx[3] |= ADXRS450_P; + if (!(hweight32(tx) & 1)) + tx |= ADXRS450_P; - ret = spi_write(st->us, st->tx, 4); - if (ret) { - dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n", - reg_address); - goto error_ret; - } - ret = spi_read(st->us, st->rx, 4); + st->tx = cpu_to_be32(tx); + spi_message_init(&msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); + ret = spi_sync(st->us, &msg); if (ret) { dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n", reg_address); goto error_ret; } - *val = (be32_to_cpu(*(u32 *)st->rx) >> 5) & 0xFFFF; + *val = (be32_to_cpu(st->rx) >> 5) & 0xFFFF; error_ret: mutex_unlock(&st->buf_lock); @@ -68,9 +133,9 @@ error_ret: /** * adxrs450_spi_write_reg_16() - write 2 bytes data to a register pair - * @dev: device associated with child of actual actual iio_dev - * @reg_address: the address of the lower of the two registers,which should be an even address, - * Second register's address is reg_address + 1. + * @indio_dev: device associated with child of actual actual iio_dev + * @reg_address: the address of the lower of the two registers,which should be + * an even address, the second register's address is reg_address + 1. * @val: value to be written. **/ static int adxrs450_spi_write_reg_16(struct iio_dev *indio_dev, @@ -78,55 +143,61 @@ static int adxrs450_spi_write_reg_16(struct iio_dev *indio_dev, u16 val) { struct adxrs450_state *st = iio_priv(indio_dev); + u32 tx; int ret; mutex_lock(&st->buf_lock); - st->tx[0] = ADXRS450_WRITE_DATA | reg_address >> 7; - st->tx[1] = reg_address << 1 | val >> 15; - st->tx[2] = val >> 7; - st->tx[3] = val << 1; + tx = ADXRS450_WRITE_DATA | (reg_address << 17) | (val << 1); - if (!(hweight32(be32_to_cpu(*(u32 *)st->tx)) & 1)) - st->tx[3] |= ADXRS450_P; + if (!(hweight32(tx) & 1)) + tx |= ADXRS450_P; - ret = spi_write(st->us, st->tx, 4); + st->tx = cpu_to_be32(tx); + ret = spi_write(st->us, &st->tx, sizeof(st->tx)); if (ret) dev_err(&st->us->dev, "problem while writing 16 bit register 0x%02x\n", reg_address); - msleep(1); /* enforce sequential transfer delay 0.1ms */ + usleep_range(100, 1000); /* enforce sequential transfer delay 0.1ms */ mutex_unlock(&st->buf_lock); return ret; } /** * adxrs450_spi_sensor_data() - read 2 bytes sensor data - * @dev: device associated with child of actual iio_dev + * @indio_dev: device associated with child of actual iio_dev * @val: somewhere to pass back the value read **/ static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val) { + struct spi_message msg; struct adxrs450_state *st = iio_priv(indio_dev); int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = &st->tx, + .bits_per_word = 8, + .len = sizeof(st->tx), + .cs_change = 1, + }, { + .rx_buf = &st->rx, + .bits_per_word = 8, + .len = sizeof(st->rx), + }, + }; mutex_lock(&st->buf_lock); - st->tx[0] = ADXRS450_SENSOR_DATA; - st->tx[1] = 0; - st->tx[2] = 0; - st->tx[3] = 0; + st->tx = cpu_to_be32(ADXRS450_SENSOR_DATA); - ret = spi_write(st->us, st->tx, 4); - if (ret) { - dev_err(&st->us->dev, "Problem while reading sensor data\n"); - goto error_ret; - } - - ret = spi_read(st->us, st->rx, 4); + spi_message_init(&msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); + ret = spi_sync(st->us, &msg); if (ret) { dev_err(&st->us->dev, "Problem while reading sensor data\n"); goto error_ret; } - *val = (be32_to_cpu(*(u32 *)st->rx) >> 10) & 0xFFFF; + *val = (be32_to_cpu(st->rx) >> 10) & 0xFFFF; error_ret: mutex_unlock(&st->buf_lock); @@ -137,26 +208,26 @@ error_ret: * adxrs450_spi_initial() - use for initializing procedure. * @st: device instance specific data * @val: somewhere to pass back the value read + * @chk: Whether to perform fault check **/ static int adxrs450_spi_initial(struct adxrs450_state *st, u32 *val, char chk) { struct spi_message msg; int ret; + u32 tx; struct spi_transfer xfers = { - .tx_buf = st->tx, - .rx_buf = st->rx, + .tx_buf = &st->tx, + .rx_buf = &st->rx, .bits_per_word = 8, - .len = 4, + .len = sizeof(st->tx), }; mutex_lock(&st->buf_lock); - st->tx[0] = ADXRS450_SENSOR_DATA; - st->tx[1] = 0; - st->tx[2] = 0; - st->tx[3] = 0; + tx = ADXRS450_SENSOR_DATA; if (chk) - st->tx[3] |= (ADXRS450_CHK | ADXRS450_P); + tx |= (ADXRS450_CHK | ADXRS450_P); + st->tx = cpu_to_be32(tx); spi_message_init(&msg); spi_message_add_tail(&xfers, &msg); ret = spi_sync(st->us, &msg); @@ -165,7 +236,7 @@ static int adxrs450_spi_initial(struct adxrs450_state *st, goto error_ret; } - *val = be32_to_cpu(*(u32 *)st->rx); + *val = be32_to_cpu(st->rx); error_ret: mutex_unlock(&st->buf_lock); @@ -185,8 +256,7 @@ static int adxrs450_initial_setup(struct iio_dev *indio_dev) if (ret) return ret; if (t != 0x01) - dev_warn(&st->us->dev, "The initial power on response " - "is not correct! Restart without reset?\n"); + dev_warn(&st->us->dev, "The initial power on response is not correct! Restart without reset?\n"); msleep(ADXRS450_STARTUP_DELAY); ret = adxrs450_spi_initial(st, &t, 0); @@ -217,20 +287,6 @@ static int adxrs450_initial_setup(struct iio_dev *indio_dev) dev_err(&st->us->dev, "The device is not in normal status!\n"); return -EINVAL; } - ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_PID1, &data); - if (ret) - return ret; - dev_info(&st->us->dev, "The Part ID is 0x%x\n", data); - - ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_SNL, &data); - if (ret) - return ret; - t = data; - ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_SNH, &data); - if (ret) - return ret; - t |= data << 16; - dev_info(&st->us->dev, "The Serial Number is 0x%x\n", t); return 0; } @@ -244,9 +300,10 @@ static int adxrs450_write_raw(struct iio_dev *indio_dev, int ret; switch (mask) { case IIO_CHAN_INFO_CALIBBIAS: + if (val < -0x400 || val >= 0x400) + return -EINVAL; ret = adxrs450_spi_write_reg_16(indio_dev, - ADXRS450_DNC1, - val & 0x3FF); + ADXRS450_DNC1, val); break; default: ret = -EINVAL; @@ -312,7 +369,7 @@ static int adxrs450_read_raw(struct iio_dev *indio_dev, ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_DNC1, &t); if (ret) break; - *val = t; + *val = sign_extend32(t, 9); ret = IIO_VAL_INT; break; default: diff --git a/drivers/iio/gyro/itg3200_buffer.c b/drivers/iio/gyro/itg3200_buffer.c new file mode 100644 index 00000000000..f667d2c8c00 --- /dev/null +++ b/drivers/iio/gyro/itg3200_buffer.c @@ -0,0 +1,156 @@ +/* + * itg3200_buffer.c -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/gyro/itg3200.h> + + +static int itg3200_read_all_channels(struct i2c_client *i2c, __be16 *buf) +{ + u8 tx = 0x80 | ITG3200_REG_TEMP_OUT_H; + struct i2c_msg msg[2] = { + { + .addr = i2c->addr, + .flags = i2c->flags, + .len = 1, + .buf = &tx, + }, + { + .addr = i2c->addr, + .flags = i2c->flags | I2C_M_RD, + .len = ITG3200_SCAN_ELEMENTS * sizeof(s16), + .buf = (char *)&buf, + }, + }; + + return i2c_transfer(i2c->adapter, msg, 2); +} + +static irqreturn_t itg3200_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct itg3200 *st = iio_priv(indio_dev); + __be16 buf[ITG3200_SCAN_ELEMENTS + sizeof(s64)/sizeof(u16)]; + + int ret = itg3200_read_all_channels(st->i2c, buf); + if (ret < 0) + goto error_ret; + + if (indio_dev->scan_timestamp) + memcpy(buf + indio_dev->scan_bytes - sizeof(s64), + &pf->timestamp, sizeof(pf->timestamp)); + + iio_push_to_buffers(indio_dev, (u8 *)buf); + iio_trigger_notify_done(indio_dev->trig); + +error_ret: + return IRQ_HANDLED; +} + +int itg3200_buffer_configure(struct iio_dev *indio_dev) +{ + return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + itg3200_trigger_handler, NULL); +} + +void itg3200_buffer_unconfigure(struct iio_dev *indio_dev) +{ + iio_triggered_buffer_cleanup(indio_dev); +} + + +static int itg3200_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = trig->private_data; + int ret; + u8 msc; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, &msc); + if (ret) + goto error_ret; + + if (state) + msc |= ITG3200_IRQ_DATA_RDY_ENABLE; + else + msc &= ~ITG3200_IRQ_DATA_RDY_ENABLE; + + ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, msc); + if (ret) + goto error_ret; + +error_ret: + return ret; + +} + +static const struct iio_trigger_ops itg3200_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &itg3200_data_rdy_trigger_set_state, +}; + +int itg3200_probe_trigger(struct iio_dev *indio_dev) +{ + int ret; + struct itg3200 *st = iio_priv(indio_dev); + + st->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, + indio_dev->id); + if (!st->trig) + return -ENOMEM; + + ret = request_irq(st->i2c->irq, + &iio_trigger_generic_data_rdy_poll, + IRQF_TRIGGER_RISING, + "itg3200_data_rdy", + st->trig); + if (ret) + goto error_free_trig; + + + st->trig->dev.parent = &st->i2c->dev; + st->trig->ops = &itg3200_trigger_ops; + st->trig->private_data = indio_dev; + ret = iio_trigger_register(st->trig); + if (ret) + goto error_free_irq; + + /* select default trigger */ + indio_dev->trig = st->trig; + + return 0; + +error_free_irq: + free_irq(st->i2c->irq, st->trig); +error_free_trig: + iio_trigger_free(st->trig); + return ret; +} + +void itg3200_remove_trigger(struct iio_dev *indio_dev) +{ + struct itg3200 *st = iio_priv(indio_dev); + + iio_trigger_unregister(st->trig); + free_irq(st->i2c->irq, st->trig); + iio_trigger_free(st->trig); +} diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c new file mode 100644 index 00000000000..df2e6aa5d73 --- /dev/null +++ b/drivers/iio/gyro/itg3200_core.c @@ -0,0 +1,401 @@ +/* + * itg3200_core.c -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: + * - Support digital low pass filter + * - Support power management + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/module.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> + +#include <linux/iio/gyro/itg3200.h> + + +int itg3200_write_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 val) +{ + struct itg3200 *st = iio_priv(indio_dev); + + return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val); +} + +int itg3200_read_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 *val) +{ + struct itg3200 *st = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(st->i2c, reg_address); + if (ret < 0) + return ret; + *val = ret; + return 0; +} + +static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address, + int *val) +{ + struct itg3200 *st = iio_priv(indio_dev); + struct i2c_client *client = st->i2c; + int ret; + s16 out; + + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = client->flags, + .len = 1, + .buf = (char *)&lower_reg_address, + }, + { + .addr = client->addr, + .flags = client->flags | I2C_M_RD, + .len = 2, + .buf = (char *)&out, + }, + }; + + lower_reg_address |= 0x80; + ret = i2c_transfer(client->adapter, msg, 2); + be16_to_cpus(&out); + *val = out; + + return (ret == 2) ? 0 : ret; +} + +static int itg3200_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long info) +{ + int ret = 0; + u8 reg; + + switch (info) { + case IIO_CHAN_INFO_RAW: + reg = (u8)chan->address; + ret = itg3200_read_reg_s16(indio_dev, reg, val); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + if (chan->type == IIO_TEMP) + *val2 = 1000000000/280; + else + *val2 = 1214142; /* (1 / 14,375) * (PI / 180) */ + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + /* Only the temperature channel has an offset */ + *val = 23000; + return IIO_VAL_INT; + default: + return -EINVAL; + } + + return ret; +} + +static ssize_t itg3200_read_frequency(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + int ret, sps; + u8 val; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val); + if (ret) + return ret; + + sps = (val & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, &val); + if (ret) + return ret; + + sps /= val + 1; + + return sprintf(buf, "%d\n", sps); +} + +static ssize_t itg3200_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + unsigned val; + int ret; + u8 t; + + ret = kstrtouint(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&indio_dev->mlock); + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t); + if (ret) + goto err_ret; + + if (val == 0) { + ret = -EINVAL; + goto err_ret; + } + t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1; + + ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, t); + +err_ret: + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +/* + * Reset device and internal registers to the power-up-default settings + * Use the gyro clock as reference, as suggested by the datasheet + */ +static int itg3200_reset(struct iio_dev *indio_dev) +{ + struct itg3200 *st = iio_priv(indio_dev); + int ret; + + dev_dbg(&st->i2c->dev, "reset device"); + + ret = itg3200_write_reg_8(indio_dev, + ITG3200_REG_POWER_MANAGEMENT, + ITG3200_RESET); + if (ret) { + dev_err(&st->i2c->dev, "error resetting device"); + goto error_ret; + } + + /* Wait for PLL (1ms according to datasheet) */ + udelay(1500); + + ret = itg3200_write_reg_8(indio_dev, + ITG3200_REG_IRQ_CONFIG, + ITG3200_IRQ_ACTIVE_HIGH | + ITG3200_IRQ_PUSH_PULL | + ITG3200_IRQ_LATCH_50US_PULSE | + ITG3200_IRQ_LATCH_CLEAR_ANY); + + if (ret) + dev_err(&st->i2c->dev, "error init device"); + +error_ret: + return ret; +} + +/* itg3200_enable_full_scale() - Disables the digital low pass filter */ +static int itg3200_enable_full_scale(struct iio_dev *indio_dev) +{ + u8 val; + int ret; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val); + if (ret) + goto err_ret; + + val |= ITG3200_DLPF_FS_SEL_2000; + return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val); + +err_ret: + return ret; +} + +static int itg3200_initial_setup(struct iio_dev *indio_dev) +{ + struct itg3200 *st = iio_priv(indio_dev); + int ret; + u8 val; + + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val); + if (ret) + goto err_ret; + + if (((val >> 1) & 0x3f) != 0x34) { + dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val); + ret = -ENXIO; + goto err_ret; + } + + ret = itg3200_reset(indio_dev); + if (ret) + goto err_ret; + + ret = itg3200_enable_full_scale(indio_dev); +err_ret: + return ret; +} + +#define ITG3200_TEMP_INFO_MASK (IIO_CHAN_INFO_OFFSET_SHARED_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_RAW_SEPARATE_BIT) +#define ITG3200_GYRO_INFO_MASK (IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_RAW_SEPARATE_BIT) + +#define ITG3200_ST \ + { .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE } + +#define ITG3200_GYRO_CHAN(_mod) { \ + .type = IIO_ANGL_VEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .info_mask = ITG3200_GYRO_INFO_MASK, \ + .address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \ + .scan_index = ITG3200_SCAN_GYRO_ ## _mod, \ + .scan_type = ITG3200_ST, \ +} + +static const struct iio_chan_spec itg3200_channels[] = { + { + .type = IIO_TEMP, + .channel2 = IIO_NO_MOD, + .info_mask = ITG3200_TEMP_INFO_MASK, + .address = ITG3200_REG_TEMP_OUT_H, + .scan_index = ITG3200_SCAN_TEMP, + .scan_type = ITG3200_ST, + }, + ITG3200_GYRO_CHAN(X), + ITG3200_GYRO_CHAN(Y), + ITG3200_GYRO_CHAN(Z), + IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS), +}; + +/* IIO device attributes */ +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, itg3200_read_frequency, + itg3200_write_frequency); + +static struct attribute *itg3200_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL +}; + +static const struct attribute_group itg3200_attribute_group = { + .attrs = itg3200_attributes, +}; + +static const struct iio_info itg3200_info = { + .attrs = &itg3200_attribute_group, + .read_raw = &itg3200_read_raw, + .driver_module = THIS_MODULE, +}; + +static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 }; + +static int itg3200_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct itg3200 *st; + struct iio_dev *indio_dev; + + dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq); + + indio_dev = iio_device_alloc(sizeof(*st)); + if (indio_dev == NULL) { + ret = -ENOMEM; + goto error_ret; + } + + st = iio_priv(indio_dev); + + i2c_set_clientdata(client, indio_dev); + st->i2c = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->name = client->dev.driver->name; + indio_dev->channels = itg3200_channels; + indio_dev->num_channels = ARRAY_SIZE(itg3200_channels); + indio_dev->available_scan_masks = itg3200_available_scan_masks; + indio_dev->info = &itg3200_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = itg3200_buffer_configure(indio_dev); + if (ret) + goto error_free_dev; + + if (client->irq) { + ret = itg3200_probe_trigger(indio_dev); + if (ret) + goto error_unconfigure_buffer; + } + + ret = itg3200_initial_setup(indio_dev); + if (ret) + goto error_remove_trigger; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_remove_trigger; + + return 0; + +error_remove_trigger: + if (client->irq) + itg3200_remove_trigger(indio_dev); +error_unconfigure_buffer: + itg3200_buffer_unconfigure(indio_dev); +error_free_dev: + iio_device_free(indio_dev); +error_ret: + return ret; +} + +static int itg3200_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + + if (client->irq) + itg3200_remove_trigger(indio_dev); + + itg3200_buffer_unconfigure(indio_dev); + + iio_device_free(indio_dev); + + return 0; +} + +static const struct i2c_device_id itg3200_id[] = { + { "itg3200", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, itg3200_id); + +static struct i2c_driver itg3200_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "itg3200", + }, + .id_table = itg3200_id, + .probe = itg3200_probe, + .remove = itg3200_remove, +}; + +module_i2c_driver(itg3200_driver); + +MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>"); +MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h new file mode 100644 index 00000000000..3ad9907bb15 --- /dev/null +++ b/drivers/iio/gyro/st_gyro.h @@ -0,0 +1,45 @@ +/* + * STMicroelectronics gyroscopes driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * v. 1.0.0 + * Licensed under the GPL-2. + */ + +#ifndef ST_GYRO_H +#define ST_GYRO_H + +#include <linux/types.h> +#include <linux/iio/common/st_sensors.h> + +#define L3G4200D_GYRO_DEV_NAME "l3g4200d" +#define LSM330D_GYRO_DEV_NAME "lsm330d_gyro" +#define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro" +#define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro" +#define L3GD20_GYRO_DEV_NAME "l3gd20" +#define L3GD20H_GYRO_DEV_NAME "l3gd20h" +#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui" +#define LSM330_GYRO_DEV_NAME "lsm330_gyro" + +int st_gyro_common_probe(struct iio_dev *indio_dev); +void st_gyro_common_remove(struct iio_dev *indio_dev); + +#ifdef CONFIG_IIO_BUFFER +int st_gyro_allocate_ring(struct iio_dev *indio_dev); +void st_gyro_deallocate_ring(struct iio_dev *indio_dev); +int st_gyro_trig_set_state(struct iio_trigger *trig, bool state); +#define ST_GYRO_TRIGGER_SET_STATE (&st_gyro_trig_set_state) +#else /* CONFIG_IIO_BUFFER */ +static inline int st_gyro_allocate_ring(struct iio_dev *indio_dev) +{ + return 0; +} +static inline void st_gyro_deallocate_ring(struct iio_dev *indio_dev) +{ +} +#define ST_GYRO_TRIGGER_SET_STATE NULL +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* ST_GYRO_H */ diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c new file mode 100644 index 00000000000..da4d122ec7d --- /dev/null +++ b/drivers/iio/gyro/st_gyro_buffer.c @@ -0,0 +1,114 @@ +/* + * STMicroelectronics gyroscopes driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_gyro.h" + +int st_gyro_trig_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = trig->private_data; + + return st_sensors_set_dataready_irq(indio_dev, state); +} + +static int st_gyro_buffer_preenable(struct iio_dev *indio_dev) +{ + int err; + + err = st_sensors_set_enable(indio_dev, true); + if (err < 0) + goto st_gyro_set_enable_error; + + err = iio_sw_buffer_preenable(indio_dev); + +st_gyro_set_enable_error: + return err; +} + +static int st_gyro_buffer_postenable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *gdata = iio_priv(indio_dev); + + gdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (gdata->buffer_data == NULL) { + err = -ENOMEM; + goto allocate_memory_error; + } + + err = st_sensors_set_axis_enable(indio_dev, + (u8)indio_dev->active_scan_mask[0]); + if (err < 0) + goto st_gyro_buffer_postenable_error; + + err = iio_triggered_buffer_postenable(indio_dev); + if (err < 0) + goto st_gyro_buffer_postenable_error; + + return err; + +st_gyro_buffer_postenable_error: + kfree(gdata->buffer_data); +allocate_memory_error: + return err; +} + +static int st_gyro_buffer_predisable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *gdata = iio_priv(indio_dev); + + err = iio_triggered_buffer_predisable(indio_dev); + if (err < 0) + goto st_gyro_buffer_predisable_error; + + err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS); + if (err < 0) + goto st_gyro_buffer_predisable_error; + + err = st_sensors_set_enable(indio_dev, false); + +st_gyro_buffer_predisable_error: + kfree(gdata->buffer_data); + return err; +} + +static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = { + .preenable = &st_gyro_buffer_preenable, + .postenable = &st_gyro_buffer_postenable, + .predisable = &st_gyro_buffer_predisable, +}; + +int st_gyro_allocate_ring(struct iio_dev *indio_dev) +{ + return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &st_sensors_trigger_handler, &st_gyro_buffer_setup_ops); +} + +void st_gyro_deallocate_ring(struct iio_dev *indio_dev) +{ + iio_triggered_buffer_cleanup(indio_dev); +} + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics gyroscopes buffer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c new file mode 100644 index 00000000000..0a09998276c --- /dev/null +++ b/drivers/iio/gyro/st_gyro_core.c @@ -0,0 +1,363 @@ +/* + * STMicroelectronics gyroscopes driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_gyro.h" + +/* DEFAULT VALUE FOR SENSORS */ +#define ST_GYRO_DEFAULT_OUT_X_L_ADDR 0x28 +#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR 0x2a +#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c + +/* FULLSCALE */ +#define ST_GYRO_FS_AVL_250DPS 250 +#define ST_GYRO_FS_AVL_500DPS 500 +#define ST_GYRO_FS_AVL_2000DPS 2000 + +/* CUSTOM VALUES FOR SENSOR 1 */ +#define ST_GYRO_1_WAI_EXP 0xd3 +#define ST_GYRO_1_ODR_ADDR 0x20 +#define ST_GYRO_1_ODR_MASK 0xc0 +#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00 +#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01 +#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02 +#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03 +#define ST_GYRO_1_PW_ADDR 0x20 +#define ST_GYRO_1_PW_MASK 0x08 +#define ST_GYRO_1_FS_ADDR 0x23 +#define ST_GYRO_1_FS_MASK 0x30 +#define ST_GYRO_1_FS_AVL_250_VAL 0x00 +#define ST_GYRO_1_FS_AVL_500_VAL 0x01 +#define ST_GYRO_1_FS_AVL_2000_VAL 0x02 +#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750) +#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500) +#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000) +#define ST_GYRO_1_BDU_ADDR 0x23 +#define ST_GYRO_1_BDU_MASK 0x80 +#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22 +#define ST_GYRO_1_DRDY_IRQ_MASK 0x08 +#define ST_GYRO_1_MULTIREAD_BIT true + +/* CUSTOM VALUES FOR SENSOR 2 */ +#define ST_GYRO_2_WAI_EXP 0xd4 +#define ST_GYRO_2_ODR_ADDR 0x20 +#define ST_GYRO_2_ODR_MASK 0xc0 +#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00 +#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01 +#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02 +#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03 +#define ST_GYRO_2_PW_ADDR 0x20 +#define ST_GYRO_2_PW_MASK 0x08 +#define ST_GYRO_2_FS_ADDR 0x23 +#define ST_GYRO_2_FS_MASK 0x30 +#define ST_GYRO_2_FS_AVL_250_VAL 0x00 +#define ST_GYRO_2_FS_AVL_500_VAL 0x01 +#define ST_GYRO_2_FS_AVL_2000_VAL 0x02 +#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750) +#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500) +#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000) +#define ST_GYRO_2_BDU_ADDR 0x23 +#define ST_GYRO_2_BDU_MASK 0x80 +#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22 +#define ST_GYRO_2_DRDY_IRQ_MASK 0x08 +#define ST_GYRO_2_MULTIREAD_BIT true + +static const struct iio_chan_spec st_gyro_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_X, + IIO_MOD_X, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS, + ST_GYRO_DEFAULT_OUT_X_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Y, + IIO_MOD_Y, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS, + ST_GYRO_DEFAULT_OUT_Y_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Z, + IIO_MOD_Z, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS, + ST_GYRO_DEFAULT_OUT_Z_L_ADDR), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct st_sensors st_gyro_sensors[] = { + { + .wai = ST_GYRO_1_WAI_EXP, + .sensors_supported = { + [0] = L3G4200D_GYRO_DEV_NAME, + [1] = LSM330DL_GYRO_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, + .odr = { + .addr = ST_GYRO_1_ODR_ADDR, + .mask = ST_GYRO_1_ODR_MASK, + .odr_avl = { + { 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, }, + { 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, }, + { 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, }, + { 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_GYRO_1_PW_ADDR, + .mask = ST_GYRO_1_PW_MASK, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = ST_GYRO_1_FS_ADDR, + .mask = ST_GYRO_1_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_GYRO_FS_AVL_250DPS, + .value = ST_GYRO_1_FS_AVL_250_VAL, + .gain = ST_GYRO_1_FS_AVL_250_GAIN, + }, + [1] = { + .num = ST_GYRO_FS_AVL_500DPS, + .value = ST_GYRO_1_FS_AVL_500_VAL, + .gain = ST_GYRO_1_FS_AVL_500_GAIN, + }, + [2] = { + .num = ST_GYRO_FS_AVL_2000DPS, + .value = ST_GYRO_1_FS_AVL_2000_VAL, + .gain = ST_GYRO_1_FS_AVL_2000_GAIN, + }, + }, + }, + .bdu = { + .addr = ST_GYRO_1_BDU_ADDR, + .mask = ST_GYRO_1_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_GYRO_1_DRDY_IRQ_ADDR, + .mask = ST_GYRO_1_DRDY_IRQ_MASK, + }, + .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, + .bootime = 2, + }, + { + .wai = ST_GYRO_2_WAI_EXP, + .sensors_supported = { + [0] = L3GD20_GYRO_DEV_NAME, + [1] = L3GD20H_GYRO_DEV_NAME, + [2] = LSM330D_GYRO_DEV_NAME, + [3] = LSM330DLC_GYRO_DEV_NAME, + [4] = L3G4IS_GYRO_DEV_NAME, + [5] = LSM330_GYRO_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, + .odr = { + .addr = ST_GYRO_2_ODR_ADDR, + .mask = ST_GYRO_2_ODR_MASK, + .odr_avl = { + { 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, }, + { 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, }, + { 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, }, + { 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_GYRO_2_PW_ADDR, + .mask = ST_GYRO_2_PW_MASK, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = ST_GYRO_2_FS_ADDR, + .mask = ST_GYRO_2_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_GYRO_FS_AVL_250DPS, + .value = ST_GYRO_2_FS_AVL_250_VAL, + .gain = ST_GYRO_2_FS_AVL_250_GAIN, + }, + [1] = { + .num = ST_GYRO_FS_AVL_500DPS, + .value = ST_GYRO_2_FS_AVL_500_VAL, + .gain = ST_GYRO_2_FS_AVL_500_GAIN, + }, + [2] = { + .num = ST_GYRO_FS_AVL_2000DPS, + .value = ST_GYRO_2_FS_AVL_2000_VAL, + .gain = ST_GYRO_2_FS_AVL_2000_GAIN, + }, + }, + }, + .bdu = { + .addr = ST_GYRO_2_BDU_ADDR, + .mask = ST_GYRO_2_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_GYRO_2_DRDY_IRQ_ADDR, + .mask = ST_GYRO_2_DRDY_IRQ_MASK, + }, + .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, + .bootime = 2, + }, +}; + +static int st_gyro_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + int err; + struct st_sensor_data *gdata = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = st_sensors_read_info_raw(indio_dev, ch, val); + if (err < 0) + goto read_error; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = gdata->current_fullscale->gain; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + +read_error: + return err; +} + +static int st_gyro_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + int err; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + err = st_sensors_set_fullscale_by_gain(indio_dev, val2); + break; + default: + err = -EINVAL; + } + + return err; +} + +static ST_SENSOR_DEV_ATTR_SAMP_FREQ(); +static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); +static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available); + +static struct attribute *st_gyro_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_gyro_attribute_group = { + .attrs = st_gyro_attributes, +}; + +static const struct iio_info gyro_info = { + .driver_module = THIS_MODULE, + .attrs = &st_gyro_attribute_group, + .read_raw = &st_gyro_read_raw, + .write_raw = &st_gyro_write_raw, +}; + +static const struct iio_trigger_ops st_gyro_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = ST_GYRO_TRIGGER_SET_STATE, +}; + +int st_gyro_common_probe(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *gdata = iio_priv(indio_dev); + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &gyro_info; + + err = st_sensors_check_device_support(indio_dev, + ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors); + if (err < 0) + goto st_gyro_common_probe_error; + + gdata->multiread_bit = gdata->sensor->multi_read_bit; + indio_dev->channels = gdata->sensor->ch; + indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; + + gdata->current_fullscale = (struct st_sensor_fullscale_avl *) + &gdata->sensor->fs.fs_avl[0]; + gdata->odr = gdata->sensor->odr.odr_avl[0].hz; + + err = st_sensors_init_sensor(indio_dev); + if (err < 0) + goto st_gyro_common_probe_error; + + if (gdata->get_irq_data_ready(indio_dev) > 0) { + err = st_gyro_allocate_ring(indio_dev); + if (err < 0) + goto st_gyro_common_probe_error; + + err = st_sensors_allocate_trigger(indio_dev, + &st_gyro_trigger_ops); + if (err < 0) + goto st_gyro_probe_trigger_error; + } + + err = iio_device_register(indio_dev); + if (err) + goto st_gyro_device_register_error; + + return err; + +st_gyro_device_register_error: + if (gdata->get_irq_data_ready(indio_dev) > 0) + st_sensors_deallocate_trigger(indio_dev); +st_gyro_probe_trigger_error: + if (gdata->get_irq_data_ready(indio_dev) > 0) + st_gyro_deallocate_ring(indio_dev); +st_gyro_common_probe_error: + return err; +} +EXPORT_SYMBOL(st_gyro_common_probe); + +void st_gyro_common_remove(struct iio_dev *indio_dev) +{ + struct st_sensor_data *gdata = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + if (gdata->get_irq_data_ready(indio_dev) > 0) { + st_sensors_deallocate_trigger(indio_dev); + st_gyro_deallocate_ring(indio_dev); + } + iio_device_free(indio_dev); +} +EXPORT_SYMBOL(st_gyro_common_remove); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c new file mode 100644 index 00000000000..a44b5b4a201 --- /dev/null +++ b/drivers/iio/gyro/st_gyro_i2c.c @@ -0,0 +1,85 @@ +/* + * STMicroelectronics gyroscopes driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_i2c.h> +#include "st_gyro.h" + +static int st_gyro_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *gdata; + int err; + + indio_dev = iio_device_alloc(sizeof(*gdata)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto iio_device_alloc_error; + } + + gdata = iio_priv(indio_dev); + gdata->dev = &client->dev; + + st_sensors_i2c_configure(indio_dev, client, gdata); + + err = st_gyro_common_probe(indio_dev); + if (err < 0) + goto st_gyro_common_probe_error; + + return 0; + +st_gyro_common_probe_error: + iio_device_free(indio_dev); +iio_device_alloc_error: + return err; +} + +static int st_gyro_i2c_remove(struct i2c_client *client) +{ + st_gyro_common_remove(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id st_gyro_id_table[] = { + { L3G4200D_GYRO_DEV_NAME }, + { LSM330D_GYRO_DEV_NAME }, + { LSM330DL_GYRO_DEV_NAME }, + { LSM330DLC_GYRO_DEV_NAME }, + { L3GD20_GYRO_DEV_NAME }, + { L3GD20H_GYRO_DEV_NAME }, + { L3G4IS_GYRO_DEV_NAME }, + { LSM330_GYRO_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_gyro_id_table); + +static struct i2c_driver st_gyro_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "st-gyro-i2c", + }, + .probe = st_gyro_i2c_probe, + .remove = st_gyro_i2c_remove, + .id_table = st_gyro_id_table, +}; +module_i2c_driver(st_gyro_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics gyroscopes i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c new file mode 100644 index 00000000000..8b4dcc5eab0 --- /dev/null +++ b/drivers/iio/gyro/st_gyro_spi.c @@ -0,0 +1,84 @@ +/* + * STMicroelectronics gyroscopes driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_spi.h> +#include "st_gyro.h" + +static int st_gyro_spi_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *gdata; + int err; + + indio_dev = iio_device_alloc(sizeof(*gdata)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto iio_device_alloc_error; + } + + gdata = iio_priv(indio_dev); + gdata->dev = &spi->dev; + + st_sensors_spi_configure(indio_dev, spi, gdata); + + err = st_gyro_common_probe(indio_dev); + if (err < 0) + goto st_gyro_common_probe_error; + + return 0; + +st_gyro_common_probe_error: + iio_device_free(indio_dev); +iio_device_alloc_error: + return err; +} + +static int st_gyro_spi_remove(struct spi_device *spi) +{ + st_gyro_common_remove(spi_get_drvdata(spi)); + + return 0; +} + +static const struct spi_device_id st_gyro_id_table[] = { + { L3G4200D_GYRO_DEV_NAME }, + { LSM330D_GYRO_DEV_NAME }, + { LSM330DL_GYRO_DEV_NAME }, + { LSM330DLC_GYRO_DEV_NAME }, + { L3GD20_GYRO_DEV_NAME }, + { L3GD20H_GYRO_DEV_NAME }, + { L3G4IS_GYRO_DEV_NAME }, + { LSM330_GYRO_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_gyro_id_table); + +static struct spi_driver st_gyro_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "st-gyro-spi", + }, + .probe = st_gyro_spi_probe, + .remove = st_gyro_spi_remove, + .id_table = st_gyro_id_table, +}; +module_spi_driver(st_gyro_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics gyroscopes spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index d55e98fb300..c42aba6817e 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -54,39 +54,25 @@ error_ret: EXPORT_SYMBOL_GPL(iio_map_array_register); -/* Assumes the exact same array (e.g. memory locations) - * used at unregistration as used at registration rather than - * more complex checking of contents. +/* + * Remove all map entries associated with the given iio device */ -int iio_map_array_unregister(struct iio_dev *indio_dev, - struct iio_map *maps) +int iio_map_array_unregister(struct iio_dev *indio_dev) { - int i = 0, ret = 0; - bool found_it; + int ret = -ENODEV; struct iio_map_internal *mapi; - - if (maps == NULL) - return 0; + struct list_head *pos, *tmp; mutex_lock(&iio_map_list_lock); - while (maps[i].consumer_dev_name != NULL) { - found_it = false; - list_for_each_entry(mapi, &iio_map_list, l) - if (&maps[i] == mapi->map) { - list_del(&mapi->l); - kfree(mapi); - found_it = true; - break; - } - if (!found_it) { - ret = -ENODEV; - goto error_ret; + list_for_each_safe(pos, tmp, &iio_map_list) { + mapi = list_entry(pos, struct iio_map_internal, l); + if (indio_dev == mapi->indio_dev) { + list_del(&mapi->l); + kfree(mapi); + ret = 0; } - i++; } -error_ret: mutex_unlock(&iio_map_list_lock); - return ret; } EXPORT_SYMBOL_GPL(iio_map_array_unregister); @@ -167,16 +153,18 @@ void iio_channel_release(struct iio_channel *channel) } EXPORT_SYMBOL_GPL(iio_channel_release); -struct iio_channel *iio_channel_get_all(const char *name) +struct iio_channel *iio_channel_get_all(struct device *dev) { + const char *name; struct iio_channel *chans; struct iio_map_internal *c = NULL; int nummaps = 0; int mapind = 0; int i, ret; - if (name == NULL) + if (dev == NULL) return ERR_PTR(-EINVAL); + name = dev_name(dev); mutex_lock(&iio_map_list_lock); /* first count the matching maps */ diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c index 5bc5c860e9c..a923c78d5cb 100644 --- a/drivers/iio/kfifo_buf.c +++ b/drivers/iio/kfifo_buf.c @@ -22,7 +22,6 @@ static inline int __iio_allocate_kfifo(struct iio_kfifo *buf, if ((length == 0) || (bytes_per_datum == 0)) return -EINVAL; - __iio_update_buffer(&buf->buffer, bytes_per_datum, length); return __kfifo_alloc((struct __kfifo *)&buf->kf, length, bytes_per_datum, GFP_KERNEL); } diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index ff11d68225c..cd29be54f64 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -14,4 +14,34 @@ config HID_SENSOR_MAGNETOMETER_3D Say yes here to build support for the HID SENSOR Magnetometer 3D. +config IIO_ST_MAGN_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_MAGN_I2C_3AXIS if (I2C) + select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + select IIO_ST_MAGN_BUFFER if (IIO_TRIGGERED_BUFFER) + help + Say yes here to build support for STMicroelectronics magnetometers: + LSM303DLHC, LSM303DLM, LIS3MDL. + + This driver can also be built as a module. If so, will be created + these modules: + - st_magn (core functions for the driver [it is mandatory]); + - st_magn_i2c (necessary for the I2C devices [optional*]); + - st_magn_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_MAGN_I2C_3AXIS + tristate + depends on IIO_ST_MAGN_3AXIS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_MAGN_SPI_3AXIS + tristate + depends on IIO_ST_MAGN_3AXIS + depends on IIO_ST_SENSORS_SPI + endmenu diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index 60dc4f2b196..e78672876dc 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -3,3 +3,10 @@ # obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o + +obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o +st_magn-y := st_magn_core.o +st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o + +obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o +obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h new file mode 100644 index 00000000000..7e81d00ef0c --- /dev/null +++ b/drivers/iio/magnetometer/st_magn.h @@ -0,0 +1,45 @@ +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * v. 1.0.0 + * Licensed under the GPL-2. + */ + +#ifndef ST_MAGN_H +#define ST_MAGN_H + +#include <linux/types.h> +#include <linux/iio/common/st_sensors.h> + +#define LSM303DLHC_MAGN_DEV_NAME "lsm303dlhc_magn" +#define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn" +#define LIS3MDL_MAGN_DEV_NAME "lis3mdl" + +int st_magn_common_probe(struct iio_dev *indio_dev); +void st_magn_common_remove(struct iio_dev *indio_dev); + +#ifdef CONFIG_IIO_BUFFER +int st_magn_allocate_ring(struct iio_dev *indio_dev); +void st_magn_deallocate_ring(struct iio_dev *indio_dev); +#else /* CONFIG_IIO_BUFFER */ +static inline int st_magn_probe_trigger(struct iio_dev *indio_dev, int irq) +{ + return 0; +} +static inline void st_magn_remove_trigger(struct iio_dev *indio_dev, int irq) +{ + return; +} +static inline int st_magn_allocate_ring(struct iio_dev *indio_dev) +{ + return 0; +} +static inline void st_magn_deallocate_ring(struct iio_dev *indio_dev) +{ +} +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* ST_MAGN_H */ diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c new file mode 100644 index 00000000000..708857bdb47 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_buffer.c @@ -0,0 +1,98 @@ +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_magn.h" + +static int st_magn_buffer_preenable(struct iio_dev *indio_dev) +{ + int err; + + err = st_sensors_set_enable(indio_dev, true); + if (err < 0) + goto st_magn_set_enable_error; + + err = iio_sw_buffer_preenable(indio_dev); + +st_magn_set_enable_error: + return err; +} + +static int st_magn_buffer_postenable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *mdata = iio_priv(indio_dev); + + mdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (mdata->buffer_data == NULL) { + err = -ENOMEM; + goto allocate_memory_error; + } + + err = iio_triggered_buffer_postenable(indio_dev); + if (err < 0) + goto st_magn_buffer_postenable_error; + + return err; + +st_magn_buffer_postenable_error: + kfree(mdata->buffer_data); +allocate_memory_error: + return err; +} + +static int st_magn_buffer_predisable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *mdata = iio_priv(indio_dev); + + err = iio_triggered_buffer_predisable(indio_dev); + if (err < 0) + goto st_magn_buffer_predisable_error; + + err = st_sensors_set_enable(indio_dev, false); + +st_magn_buffer_predisable_error: + kfree(mdata->buffer_data); + return err; +} + +static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = { + .preenable = &st_magn_buffer_preenable, + .postenable = &st_magn_buffer_postenable, + .predisable = &st_magn_buffer_predisable, +}; + +int st_magn_allocate_ring(struct iio_dev *indio_dev) +{ + return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &st_sensors_trigger_handler, &st_magn_buffer_setup_ops); +} + +void st_magn_deallocate_ring(struct iio_dev *indio_dev) +{ + iio_triggered_buffer_cleanup(indio_dev); +} + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers buffer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c new file mode 100644 index 00000000000..a69fbe19fc8 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -0,0 +1,401 @@ +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_magn.h" + +/* DEFAULT VALUE FOR SENSORS */ +#define ST_MAGN_DEFAULT_OUT_X_L_ADDR 0X04 +#define ST_MAGN_DEFAULT_OUT_Y_L_ADDR 0X08 +#define ST_MAGN_DEFAULT_OUT_Z_L_ADDR 0X06 + +/* FULLSCALE */ +#define ST_MAGN_FS_AVL_1300MG 1300 +#define ST_MAGN_FS_AVL_1900MG 1900 +#define ST_MAGN_FS_AVL_2500MG 2500 +#define ST_MAGN_FS_AVL_4000MG 4000 +#define ST_MAGN_FS_AVL_4700MG 4700 +#define ST_MAGN_FS_AVL_5600MG 5600 +#define ST_MAGN_FS_AVL_8000MG 8000 +#define ST_MAGN_FS_AVL_8100MG 8100 +#define ST_MAGN_FS_AVL_10000MG 10000 + +/* CUSTOM VALUES FOR SENSOR 1 */ +#define ST_MAGN_1_WAI_EXP 0x3c +#define ST_MAGN_1_ODR_ADDR 0x00 +#define ST_MAGN_1_ODR_MASK 0x1c +#define ST_MAGN_1_ODR_AVL_1HZ_VAL 0x00 +#define ST_MAGN_1_ODR_AVL_2HZ_VAL 0x01 +#define ST_MAGN_1_ODR_AVL_3HZ_VAL 0x02 +#define ST_MAGN_1_ODR_AVL_8HZ_VAL 0x03 +#define ST_MAGN_1_ODR_AVL_15HZ_VAL 0x04 +#define ST_MAGN_1_ODR_AVL_30HZ_VAL 0x05 +#define ST_MAGN_1_ODR_AVL_75HZ_VAL 0x06 +#define ST_MAGN_1_ODR_AVL_220HZ_VAL 0x07 +#define ST_MAGN_1_PW_ADDR 0x02 +#define ST_MAGN_1_PW_MASK 0x03 +#define ST_MAGN_1_PW_ON 0x00 +#define ST_MAGN_1_PW_OFF 0x03 +#define ST_MAGN_1_FS_ADDR 0x01 +#define ST_MAGN_1_FS_MASK 0xe0 +#define ST_MAGN_1_FS_AVL_1300_VAL 0x01 +#define ST_MAGN_1_FS_AVL_1900_VAL 0x02 +#define ST_MAGN_1_FS_AVL_2500_VAL 0x03 +#define ST_MAGN_1_FS_AVL_4000_VAL 0x04 +#define ST_MAGN_1_FS_AVL_4700_VAL 0x05 +#define ST_MAGN_1_FS_AVL_5600_VAL 0x06 +#define ST_MAGN_1_FS_AVL_8100_VAL 0x07 +#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 1100 +#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 855 +#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 670 +#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 450 +#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 400 +#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 330 +#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 230 +#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 980 +#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 760 +#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 600 +#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 400 +#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 355 +#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 295 +#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 205 +#define ST_MAGN_1_MULTIREAD_BIT false + +/* CUSTOM VALUES FOR SENSOR 2 */ +#define ST_MAGN_2_WAI_EXP 0x3d +#define ST_MAGN_2_ODR_ADDR 0x20 +#define ST_MAGN_2_ODR_MASK 0x1c +#define ST_MAGN_2_ODR_AVL_1HZ_VAL 0x00 +#define ST_MAGN_2_ODR_AVL_2HZ_VAL 0x01 +#define ST_MAGN_2_ODR_AVL_3HZ_VAL 0x02 +#define ST_MAGN_2_ODR_AVL_5HZ_VAL 0x03 +#define ST_MAGN_2_ODR_AVL_10HZ_VAL 0x04 +#define ST_MAGN_2_ODR_AVL_20HZ_VAL 0x05 +#define ST_MAGN_2_ODR_AVL_40HZ_VAL 0x06 +#define ST_MAGN_2_ODR_AVL_80HZ_VAL 0x07 +#define ST_MAGN_2_PW_ADDR 0x22 +#define ST_MAGN_2_PW_MASK 0x03 +#define ST_MAGN_2_PW_ON 0x00 +#define ST_MAGN_2_PW_OFF 0x03 +#define ST_MAGN_2_FS_ADDR 0x21 +#define ST_MAGN_2_FS_MASK 0x60 +#define ST_MAGN_2_FS_AVL_4000_VAL 0x00 +#define ST_MAGN_2_FS_AVL_8000_VAL 0x01 +#define ST_MAGN_2_FS_AVL_10000_VAL 0x02 +#define ST_MAGN_2_FS_AVL_4000_GAIN 430 +#define ST_MAGN_2_FS_AVL_8000_GAIN 230 +#define ST_MAGN_2_FS_AVL_10000_GAIN 230 +#define ST_MAGN_2_MULTIREAD_BIT false +#define ST_MAGN_2_OUT_X_L_ADDR 0x28 +#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a +#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c + +static const struct iio_chan_spec st_magn_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_X_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Y_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Z_L_ADDR), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct iio_chan_spec st_magn_2_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_X_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Y_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE, + ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Z_L_ADDR), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct st_sensors st_magn_sensors[] = { + { + .wai = ST_MAGN_1_WAI_EXP, + .sensors_supported = { + [0] = LSM303DLHC_MAGN_DEV_NAME, + [1] = LSM303DLM_MAGN_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_16bit_channels, + .odr = { + .addr = ST_MAGN_1_ODR_ADDR, + .mask = ST_MAGN_1_ODR_MASK, + .odr_avl = { + { 1, ST_MAGN_1_ODR_AVL_1HZ_VAL, }, + { 2, ST_MAGN_1_ODR_AVL_2HZ_VAL, }, + { 3, ST_MAGN_1_ODR_AVL_3HZ_VAL, }, + { 8, ST_MAGN_1_ODR_AVL_8HZ_VAL, }, + { 15, ST_MAGN_1_ODR_AVL_15HZ_VAL, }, + { 30, ST_MAGN_1_ODR_AVL_30HZ_VAL, }, + { 75, ST_MAGN_1_ODR_AVL_75HZ_VAL, }, + { 220, ST_MAGN_1_ODR_AVL_220HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_MAGN_1_PW_ADDR, + .mask = ST_MAGN_1_PW_MASK, + .value_on = ST_MAGN_1_PW_ON, + .value_off = ST_MAGN_1_PW_OFF, + }, + .fs = { + .addr = ST_MAGN_1_FS_ADDR, + .mask = ST_MAGN_1_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_1300MG, + .value = ST_MAGN_1_FS_AVL_1300_VAL, + .gain = ST_MAGN_1_FS_AVL_1300_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_1300_GAIN_Z, + }, + [1] = { + .num = ST_MAGN_FS_AVL_1900MG, + .value = ST_MAGN_1_FS_AVL_1900_VAL, + .gain = ST_MAGN_1_FS_AVL_1900_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_1900_GAIN_Z, + }, + [2] = { + .num = ST_MAGN_FS_AVL_2500MG, + .value = ST_MAGN_1_FS_AVL_2500_VAL, + .gain = ST_MAGN_1_FS_AVL_2500_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_2500_GAIN_Z, + }, + [3] = { + .num = ST_MAGN_FS_AVL_4000MG, + .value = ST_MAGN_1_FS_AVL_4000_VAL, + .gain = ST_MAGN_1_FS_AVL_4000_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_4000_GAIN_Z, + }, + [4] = { + .num = ST_MAGN_FS_AVL_4700MG, + .value = ST_MAGN_1_FS_AVL_4700_VAL, + .gain = ST_MAGN_1_FS_AVL_4700_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_4700_GAIN_Z, + }, + [5] = { + .num = ST_MAGN_FS_AVL_5600MG, + .value = ST_MAGN_1_FS_AVL_5600_VAL, + .gain = ST_MAGN_1_FS_AVL_5600_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_5600_GAIN_Z, + }, + [6] = { + .num = ST_MAGN_FS_AVL_8100MG, + .value = ST_MAGN_1_FS_AVL_8100_VAL, + .gain = ST_MAGN_1_FS_AVL_8100_GAIN_XY, + .gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z, + }, + }, + }, + .multi_read_bit = ST_MAGN_1_MULTIREAD_BIT, + .bootime = 2, + }, + { + .wai = ST_MAGN_2_WAI_EXP, + .sensors_supported = { + [0] = LIS3MDL_MAGN_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_2_16bit_channels, + .odr = { + .addr = ST_MAGN_2_ODR_ADDR, + .mask = ST_MAGN_2_ODR_MASK, + .odr_avl = { + { 1, ST_MAGN_2_ODR_AVL_1HZ_VAL, }, + { 2, ST_MAGN_2_ODR_AVL_2HZ_VAL, }, + { 3, ST_MAGN_2_ODR_AVL_3HZ_VAL, }, + { 5, ST_MAGN_2_ODR_AVL_5HZ_VAL, }, + { 10, ST_MAGN_2_ODR_AVL_10HZ_VAL, }, + { 20, ST_MAGN_2_ODR_AVL_20HZ_VAL, }, + { 40, ST_MAGN_2_ODR_AVL_40HZ_VAL, }, + { 80, ST_MAGN_2_ODR_AVL_80HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_MAGN_2_PW_ADDR, + .mask = ST_MAGN_2_PW_MASK, + .value_on = ST_MAGN_2_PW_ON, + .value_off = ST_MAGN_2_PW_OFF, + }, + .fs = { + .addr = ST_MAGN_2_FS_ADDR, + .mask = ST_MAGN_2_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_4000MG, + .value = ST_MAGN_2_FS_AVL_4000_VAL, + .gain = ST_MAGN_2_FS_AVL_4000_GAIN, + }, + [1] = { + .num = ST_MAGN_FS_AVL_8000MG, + .value = ST_MAGN_2_FS_AVL_8000_VAL, + .gain = ST_MAGN_2_FS_AVL_8000_GAIN, + }, + [2] = { + .num = ST_MAGN_FS_AVL_10000MG, + .value = ST_MAGN_2_FS_AVL_10000_VAL, + .gain = ST_MAGN_2_FS_AVL_10000_GAIN, + }, + }, + }, + .multi_read_bit = ST_MAGN_2_MULTIREAD_BIT, + .bootime = 2, + }, +}; + +static int st_magn_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + int err; + struct st_sensor_data *mdata = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = st_sensors_read_info_raw(indio_dev, ch, val); + if (err < 0) + goto read_error; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + if ((ch->scan_index == ST_SENSORS_SCAN_Z) && + (mdata->current_fullscale->gain2 != 0)) + *val2 = mdata->current_fullscale->gain2; + else + *val2 = mdata->current_fullscale->gain; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + +read_error: + return err; +} + +static int st_magn_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + int err; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + err = st_sensors_set_fullscale_by_gain(indio_dev, val2); + break; + default: + err = -EINVAL; + } + + return err; +} + +static ST_SENSOR_DEV_ATTR_SAMP_FREQ(); +static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); +static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available); + +static struct attribute *st_magn_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_magn_scale_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_magn_attribute_group = { + .attrs = st_magn_attributes, +}; + +static const struct iio_info magn_info = { + .driver_module = THIS_MODULE, + .attrs = &st_magn_attribute_group, + .read_raw = &st_magn_read_raw, + .write_raw = &st_magn_write_raw, +}; + +int st_magn_common_probe(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *mdata = iio_priv(indio_dev); + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &magn_info; + + err = st_sensors_check_device_support(indio_dev, + ARRAY_SIZE(st_magn_sensors), st_magn_sensors); + if (err < 0) + goto st_magn_common_probe_error; + + mdata->multiread_bit = mdata->sensor->multi_read_bit; + indio_dev->channels = mdata->sensor->ch; + indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; + + mdata->current_fullscale = (struct st_sensor_fullscale_avl *) + &mdata->sensor->fs.fs_avl[0]; + mdata->odr = mdata->sensor->odr.odr_avl[0].hz; + + err = st_sensors_init_sensor(indio_dev); + if (err < 0) + goto st_magn_common_probe_error; + + if (mdata->get_irq_data_ready(indio_dev) > 0) { + err = st_magn_allocate_ring(indio_dev); + if (err < 0) + goto st_magn_common_probe_error; + err = st_sensors_allocate_trigger(indio_dev, NULL); + if (err < 0) + goto st_magn_probe_trigger_error; + } + + err = iio_device_register(indio_dev); + if (err) + goto st_magn_device_register_error; + + return err; + +st_magn_device_register_error: + if (mdata->get_irq_data_ready(indio_dev) > 0) + st_sensors_deallocate_trigger(indio_dev); +st_magn_probe_trigger_error: + if (mdata->get_irq_data_ready(indio_dev) > 0) + st_magn_deallocate_ring(indio_dev); +st_magn_common_probe_error: + return err; +} +EXPORT_SYMBOL(st_magn_common_probe); + +void st_magn_common_remove(struct iio_dev *indio_dev) +{ + struct st_sensor_data *mdata = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + if (mdata->get_irq_data_ready(indio_dev) > 0) { + st_sensors_deallocate_trigger(indio_dev); + st_magn_deallocate_ring(indio_dev); + } + iio_device_free(indio_dev); +} +EXPORT_SYMBOL(st_magn_common_remove); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c new file mode 100644 index 00000000000..710b256a5a0 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_i2c.c @@ -0,0 +1,81 @@ +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_i2c.h> +#include "st_magn.h" + +static int st_magn_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *mdata; + int err; + + indio_dev = iio_device_alloc(sizeof(*mdata)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto iio_device_alloc_error; + } + + mdata = iio_priv(indio_dev); + mdata->dev = &client->dev; + + st_sensors_i2c_configure(indio_dev, client, mdata); + + err = st_magn_common_probe(indio_dev); + if (err < 0) + goto st_magn_common_probe_error; + + return 0; + +st_magn_common_probe_error: + iio_device_free(indio_dev); +iio_device_alloc_error: + return err; +} + +static int st_magn_i2c_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + st_magn_common_remove(indio_dev); + + return 0; +} + +static const struct i2c_device_id st_magn_id_table[] = { + { LSM303DLHC_MAGN_DEV_NAME }, + { LSM303DLM_MAGN_DEV_NAME }, + { LIS3MDL_MAGN_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_magn_id_table); + +static struct i2c_driver st_magn_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "st-magn-i2c", + }, + .probe = st_magn_i2c_probe, + .remove = st_magn_i2c_remove, + .id_table = st_magn_id_table, +}; +module_i2c_driver(st_magn_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c new file mode 100644 index 00000000000..94547e7d658 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_spi.c @@ -0,0 +1,80 @@ +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_spi.h> +#include "st_magn.h" + +static int st_magn_spi_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *mdata; + int err; + + indio_dev = iio_device_alloc(sizeof(*mdata)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto iio_device_alloc_error; + } + + mdata = iio_priv(indio_dev); + mdata->dev = &spi->dev; + + st_sensors_spi_configure(indio_dev, spi, mdata); + + err = st_magn_common_probe(indio_dev); + if (err < 0) + goto st_magn_common_probe_error; + + return 0; + +st_magn_common_probe_error: + iio_device_free(indio_dev); +iio_device_alloc_error: + return err; +} + +static int st_magn_spi_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + st_magn_common_remove(indio_dev); + + return 0; +} + +static const struct spi_device_id st_magn_id_table[] = { + { LSM303DLHC_MAGN_DEV_NAME }, + { LSM303DLM_MAGN_DEV_NAME }, + { LIS3MDL_MAGN_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_magn_id_table); + +static struct spi_driver st_magn_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "st-magn-spi", + }, + .probe = st_magn_spi_probe, + .remove = st_magn_spi_remove, + .id_table = st_magn_id_table, +}; +module_spi_driver(st_magn_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/gyro/Kconfig b/drivers/staging/iio/gyro/Kconfig index 658b3673d05..83606628719 100644 --- a/drivers/staging/iio/gyro/Kconfig +++ b/drivers/staging/iio/gyro/Kconfig @@ -29,14 +29,4 @@ config ADIS16260 This driver can also be built as a module. If so, the module will be called adis16260. -config ADXRS450 - tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver" - depends on SPI - help - Say yes here to build support for Analog Devices ADXRS450 and ADXRS453 - programmable digital output gyroscope. - - This driver can also be built as a module. If so, the module - will be called adxrs450. - endmenu diff --git a/drivers/staging/iio/gyro/Makefile b/drivers/staging/iio/gyro/Makefile index ef331617129..98e650061a3 100644 --- a/drivers/staging/iio/gyro/Makefile +++ b/drivers/staging/iio/gyro/Makefile @@ -10,6 +10,3 @@ obj-$(CONFIG_ADIS16130) += adis16130.o adis16260-y := adis16260_core.o obj-$(CONFIG_ADIS16260) += adis16260.o - -adxrs450-y := adxrs450_core.o -obj-$(CONFIG_ADXRS450) += adxrs450.o diff --git a/drivers/staging/iio/gyro/adxrs450.h b/drivers/staging/iio/gyro/adxrs450.h deleted file mode 100644 index f8cf21f0294..00000000000 --- a/drivers/staging/iio/gyro/adxrs450.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef SPI_ADXRS450_H_ -#define SPI_ADXRS450_H_ - -#define ADXRS450_STARTUP_DELAY 50 /* ms */ - -/* The MSB for the spi commands */ -#define ADXRS450_SENSOR_DATA 0x20 -#define ADXRS450_WRITE_DATA 0x40 -#define ADXRS450_READ_DATA 0x80 - -#define ADXRS450_RATE1 0x00 /* Rate Registers */ -#define ADXRS450_TEMP1 0x02 /* Temperature Registers */ -#define ADXRS450_LOCST1 0x04 /* Low CST Memory Registers */ -#define ADXRS450_HICST1 0x06 /* High CST Memory Registers */ -#define ADXRS450_QUAD1 0x08 /* Quad Memory Registers */ -#define ADXRS450_FAULT1 0x0A /* Fault Registers */ -#define ADXRS450_PID1 0x0C /* Part ID Register 1 */ -#define ADXRS450_SNH 0x0E /* Serial Number Registers, 4 bytes */ -#define ADXRS450_SNL 0x10 -#define ADXRS450_DNC1 0x12 /* Dynamic Null Correction Registers */ -/* Check bits */ -#define ADXRS450_P 0x01 -#define ADXRS450_CHK 0x02 -#define ADXRS450_CST 0x04 -#define ADXRS450_PWR 0x08 -#define ADXRS450_POR 0x10 -#define ADXRS450_NVM 0x20 -#define ADXRS450_Q 0x40 -#define ADXRS450_PLL 0x80 -#define ADXRS450_UV 0x100 -#define ADXRS450_OV 0x200 -#define ADXRS450_AMP 0x400 -#define ADXRS450_FAIL 0x800 - -#define ADXRS450_WRERR_MASK (0x7 << 29) - -#define ADXRS450_MAX_RX 4 -#define ADXRS450_MAX_TX 4 - -#define ADXRS450_GET_ST(a) ((a >> 26) & 0x3) - -enum { - ID_ADXRS450, - ID_ADXRS453, -}; - -/** - * struct adxrs450_state - device instance specific data - * @us: actual spi_device - * @buf_lock: mutex to protect tx and rx - * @tx: transmit buffer - * @rx: receive buffer - **/ -struct adxrs450_state { - struct spi_device *us; - struct mutex buf_lock; - u8 tx[ADXRS450_MAX_RX] ____cacheline_aligned; - u8 rx[ADXRS450_MAX_TX]; - -}; - -#endif /* SPI_ADXRS450_H_ */ diff --git a/drivers/staging/iio/iio_hwmon.c b/drivers/staging/iio/iio_hwmon.c index 97ad645bb15..93af756ba48 100644 --- a/drivers/staging/iio/iio_hwmon.c +++ b/drivers/staging/iio/iio_hwmon.c @@ -55,63 +55,58 @@ static ssize_t iio_hwmon_read_val(struct device *dev, return sprintf(buf, "%d\n", result); } -static void iio_hwmon_free_attrs(struct iio_hwmon_state *st) +static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) { - int i; - struct sensor_device_attribute *a; - for (i = 0; i < st->num_channels; i++) - if (st->attrs[i]) { - a = to_sensor_dev_attr( - container_of(st->attrs[i], - struct device_attribute, - attr)); - kfree(a); - } + return sprintf(buf, "iio_hwmon\n"); } +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + static int iio_hwmon_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct iio_hwmon_state *st; struct sensor_device_attribute *a; int ret, i; int in_i = 1, temp_i = 1, curr_i = 1; enum iio_chan_type type; + struct iio_channel *channels; - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (st == NULL) { - ret = -ENOMEM; - goto error_ret; - } + channels = iio_channel_get_all(dev); + if (IS_ERR(channels)) + return PTR_ERR(channels); - st->channels = iio_channel_get_all(dev_name(&pdev->dev)); - if (IS_ERR(st->channels)) { - ret = PTR_ERR(st->channels); - goto error_free_state; - } + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); + if (st == NULL) + return -ENOMEM; + + st->channels = channels; /* count how many attributes we have */ while (st->channels[st->num_channels].indio_dev) st->num_channels++; - st->attrs = kzalloc(sizeof(*st->attrs) * (st->num_channels + 1), - GFP_KERNEL); + st->attrs = devm_kzalloc(dev, + sizeof(*st->attrs) * (st->num_channels + 2), + GFP_KERNEL); if (st->attrs == NULL) { ret = -ENOMEM; goto error_release_channels; } + for (i = 0; i < st->num_channels; i++) { - a = kzalloc(sizeof(*a), GFP_KERNEL); + a = devm_kzalloc(dev, sizeof(*a), GFP_KERNEL); if (a == NULL) { ret = -ENOMEM; - goto error_free_attrs; + goto error_release_channels; } sysfs_attr_init(&a->dev_attr.attr); ret = iio_get_channel_type(&st->channels[i], &type); - if (ret < 0) { - kfree(a); - goto error_free_attrs; - } + if (ret < 0) + goto error_release_channels; + switch (type) { case IIO_VOLTAGE: a->dev_attr.attr.name = kasprintf(GFP_KERNEL, @@ -130,27 +125,25 @@ static int iio_hwmon_probe(struct platform_device *pdev) break; default: ret = -EINVAL; - kfree(a); - goto error_free_attrs; + goto error_release_channels; } if (a->dev_attr.attr.name == NULL) { - kfree(a); ret = -ENOMEM; - goto error_free_attrs; + goto error_release_channels; } a->dev_attr.show = iio_hwmon_read_val; a->dev_attr.attr.mode = S_IRUGO; a->index = i; st->attrs[i] = &a->dev_attr.attr; } - + st->attrs[st->num_channels] = &dev_attr_name.attr; st->attr_group.attrs = st->attrs; platform_set_drvdata(pdev, st); - ret = sysfs_create_group(&pdev->dev.kobj, &st->attr_group); + ret = sysfs_create_group(&dev->kobj, &st->attr_group); if (ret < 0) - goto error_free_attrs; + goto error_release_channels; - st->hwmon_dev = hwmon_device_register(&pdev->dev); + st->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(st->hwmon_dev)) { ret = PTR_ERR(st->hwmon_dev); goto error_remove_group; @@ -158,15 +151,9 @@ static int iio_hwmon_probe(struct platform_device *pdev) return 0; error_remove_group: - sysfs_remove_group(&pdev->dev.kobj, &st->attr_group); -error_free_attrs: - iio_hwmon_free_attrs(st); - kfree(st->attrs); + sysfs_remove_group(&dev->kobj, &st->attr_group); error_release_channels: iio_channel_release_all(st->channels); -error_free_state: - kfree(st); -error_ret: return ret; } @@ -176,17 +163,21 @@ static int iio_hwmon_remove(struct platform_device *pdev) hwmon_device_unregister(st->hwmon_dev); sysfs_remove_group(&pdev->dev.kobj, &st->attr_group); - iio_hwmon_free_attrs(st); - kfree(st->attrs); iio_channel_release_all(st->channels); return 0; } +static struct of_device_id iio_hwmon_of_match[] = { + { .compatible = "iio-hwmon", }, + { } +}; + static struct platform_driver __refdata iio_hwmon_driver = { .driver = { .name = "iio_hwmon", .owner = THIS_MODULE, + .of_match_table = iio_hwmon_of_match, }, .probe = iio_hwmon_probe, .remove = iio_hwmon_remove, diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index f3eea18fdf4..2bac0eb8948 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -103,19 +103,6 @@ int iio_update_buffers(struct iio_dev *indio_dev, **/ void iio_buffer_init(struct iio_buffer *buffer); -/** - * __iio_update_buffer() - update common elements of buffers - * @buffer: buffer that is the event source - * @bytes_per_datum: size of individual datum including timestamp - * @length: number of datums in buffer - **/ -static inline void __iio_update_buffer(struct iio_buffer *buffer, - int bytes_per_datum, int length) -{ - buffer->bytes_per_datum = bytes_per_datum; - buffer->length = length; -} - int iio_scan_mask_query(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h new file mode 100644 index 00000000000..c40fdf537f6 --- /dev/null +++ b/include/linux/iio/common/st_sensors.h @@ -0,0 +1,270 @@ +/* + * STMicroelectronics sensors library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_H +#define ST_SENSORS_H + +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/irqreturn.h> +#include <linux/iio/trigger.h> + +#define ST_SENSORS_TX_MAX_LENGTH 2 +#define ST_SENSORS_RX_MAX_LENGTH 6 + +#define ST_SENSORS_ODR_LIST_MAX 10 +#define ST_SENSORS_FULLSCALE_AVL_MAX 10 + +#define ST_SENSORS_NUMBER_ALL_CHANNELS 4 +#define ST_SENSORS_NUMBER_DATA_CHANNELS 3 +#define ST_SENSORS_ENABLE_ALL_AXIS 0x07 +#define ST_SENSORS_BYTE_FOR_CHANNEL 2 +#define ST_SENSORS_SCAN_X 0 +#define ST_SENSORS_SCAN_Y 1 +#define ST_SENSORS_SCAN_Z 2 +#define ST_SENSORS_DEFAULT_12_REALBITS 12 +#define ST_SENSORS_DEFAULT_16_REALBITS 16 +#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01 +#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00 +#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f +#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20 +#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07 +#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3 + +#define ST_SENSORS_MAX_NAME 17 +#define ST_SENSORS_MAX_4WAI 7 + +#define ST_SENSORS_LSM_CHANNELS(device_type, index, mod, endian, bits, addr) \ +{ \ + .type = device_type, \ + .modified = 1, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .scan_index = index, \ + .channel2 = mod, \ + .address = addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = bits, \ + .shift = 16 - bits, \ + .storagebits = 16, \ + .endianness = endian, \ + }, \ +} + +#define ST_SENSOR_DEV_ATTR_SAMP_FREQ() \ + IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, \ + st_sensors_sysfs_get_sampling_frequency, \ + st_sensors_sysfs_set_sampling_frequency) + +#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \ + IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \ + st_sensors_sysfs_sampling_frequency_avail) + +#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \ + IIO_DEVICE_ATTR(name, S_IRUGO, \ + st_sensors_sysfs_scale_avail, NULL , 0); + +struct st_sensor_odr_avl { + unsigned int hz; + u8 value; +}; + +struct st_sensor_odr { + u8 addr; + u8 mask; + struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX]; +}; + +struct st_sensor_power { + u8 addr; + u8 mask; + u8 value_off; + u8 value_on; +}; + +struct st_sensor_axis { + u8 addr; + u8 mask; +}; + +struct st_sensor_fullscale_avl { + unsigned int num; + u8 value; + unsigned int gain; + unsigned int gain2; +}; + +struct st_sensor_fullscale { + u8 addr; + u8 mask; + struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX]; +}; + +/** + * struct st_sensor_bdu - ST sensor device block data update + * @addr: address of the register. + * @mask: mask to write the block data update flag. + */ +struct st_sensor_bdu { + u8 addr; + u8 mask; +}; + +/** + * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt + * @addr: address of the register. + * @mask: mask to write the on/off value. + * struct ig1 - represents the Interrupt Generator 1 of sensors. + * @en_addr: address of the enable ig1 register. + * @en_mask: mask to write the on/off value for enable. + */ +struct st_sensor_data_ready_irq { + u8 addr; + u8 mask; + struct { + u8 en_addr; + u8 en_mask; + } ig1; +}; + +/** + * struct st_sensor_transfer_buffer - ST sensor device I/O buffer + * @buf_lock: Mutex to protect rx and tx buffers. + * @tx_buf: Buffer used by SPI transfer function to send data to the sensors. + * This buffer is used to avoid DMA not-aligned issue. + * @rx_buf: Buffer used by SPI transfer to receive data from sensors. + * This buffer is used to avoid DMA not-aligned issue. + */ +struct st_sensor_transfer_buffer { + struct mutex buf_lock; + u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH]; + u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned; +}; + +/** + * struct st_sensor_transfer_function - ST sensor device I/O function + * @read_byte: Function used to read one byte. + * @write_byte: Function used to write one byte. + * @read_multiple_byte: Function used to read multiple byte. + */ +struct st_sensor_transfer_function { + int (*read_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 *res_byte); + int (*write_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 data); + int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, int len, u8 *data, + bool multiread_bit); +}; + +/** + * struct st_sensors - ST sensors list + * @wai: Contents of WhoAmI register. + * @sensors_supported: List of supported sensors by struct itself. + * @ch: IIO channels for the sensor. + * @odr: Output data rate register and ODR list available. + * @pw: Power register of the sensor. + * @enable_axis: Enable one or more axis of the sensor. + * @fs: Full scale register and full scale list available. + * @bdu: Block data update register. + * @drdy_irq: Data ready register of the sensor. + * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read. + * @bootime: samples to discard when sensor passing from power-down to power-up. + */ +struct st_sensors { + u8 wai; + char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME]; + struct iio_chan_spec *ch; + struct st_sensor_odr odr; + struct st_sensor_power pw; + struct st_sensor_axis enable_axis; + struct st_sensor_fullscale fs; + struct st_sensor_bdu bdu; + struct st_sensor_data_ready_irq drdy_irq; + bool multi_read_bit; + unsigned int bootime; +}; + +/** + * struct st_sensor_data - ST sensor device status + * @dev: Pointer to instance of struct device (I2C or SPI). + * @trig: The trigger in use by the core driver. + * @sensor: Pointer to the current sensor struct in use. + * @current_fullscale: Maximum range of measure by the sensor. + * @enabled: Status of the sensor (false->off, true->on). + * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread. + * @buffer_data: Data used by buffer part. + * @odr: Output data rate of the sensor [Hz]. + * @get_irq_data_ready: Function to get the IRQ used for data ready signal. + * @tf: Transfer function structure used by I/O operations. + * @tb: Transfer buffers and mutex used by I/O operations. + */ +struct st_sensor_data { + struct device *dev; + struct iio_trigger *trig; + struct st_sensors *sensor; + struct st_sensor_fullscale_avl *current_fullscale; + + bool enabled; + bool multiread_bit; + + char *buffer_data; + + unsigned int odr; + + unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); + + const struct st_sensor_transfer_function *tf; + struct st_sensor_transfer_buffer tb; +}; + +#ifdef CONFIG_IIO_BUFFER +int st_sensors_allocate_trigger(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops); + +void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); + +irqreturn_t st_sensors_trigger_handler(int irq, void *p); + +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); +#endif + +int st_sensors_init_sensor(struct iio_dev *indio_dev); + +int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable); + +int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable); + +int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr); + +int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable); + +int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale); + +int st_sensors_read_info_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val); + +int st_sensors_check_device_support(struct iio_dev *indio_dev, + int num_sensors_list, const struct st_sensors *sensors); + +ssize_t st_sensors_sysfs_get_sampling_frequency(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t st_sensors_sysfs_set_sampling_frequency(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size); + +ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t st_sensors_sysfs_scale_avail(struct device *dev, + struct device_attribute *attr, char *buf); + +#endif /* ST_SENSORS_H */ diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h new file mode 100644 index 00000000000..67d845385ae --- /dev/null +++ b/include/linux/iio/common/st_sensors_i2c.h @@ -0,0 +1,20 @@ +/* + * STMicroelectronics sensors i2c library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_I2C_H +#define ST_SENSORS_I2C_H + +#include <linux/i2c.h> +#include <linux/iio/common/st_sensors.h> + +void st_sensors_i2c_configure(struct iio_dev *indio_dev, + struct i2c_client *client, struct st_sensor_data *sdata); + +#endif /* ST_SENSORS_I2C_H */ diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h new file mode 100644 index 00000000000..d964a3563dc --- /dev/null +++ b/include/linux/iio/common/st_sensors_spi.h @@ -0,0 +1,20 @@ +/* + * STMicroelectronics sensors spi library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_SPI_H +#define ST_SENSORS_SPI_H + +#include <linux/spi/spi.h> +#include <linux/iio/common/st_sensors.h> + +void st_sensors_spi_configure(struct iio_dev *indio_dev, + struct spi_device *spi, struct st_sensor_data *sdata); + +#endif /* ST_SENSORS_SPI_H */ diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 16c35ac045b..a85787ac66a 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -15,6 +15,7 @@ struct iio_dev; struct iio_chan_spec; +struct device; /** * struct iio_channel - everything needed for a consumer to use a channel @@ -48,14 +49,14 @@ void iio_channel_release(struct iio_channel *chan); /** * iio_channel_get_all() - get all channels associated with a client - * @name: name of consumer device. + * @dev: Pointer to consumer device. * * Returns an array of iio_channel structures terminated with one with * null iio_dev pointer. * This function is used by fairly generic consumers to get all the * channels registered as having this consumer. */ -struct iio_channel *iio_channel_get_all(const char *name); +struct iio_channel *iio_channel_get_all(struct device *dev); /** * iio_channel_release_all() - reverse iio_channel_get_all @@ -66,7 +67,7 @@ void iio_channel_release_all(struct iio_channel *chan); struct iio_cb_buffer; /** * iio_channel_get_all_cb() - register callback for triggered capture - * @name: Name of client device. + * @dev: Pointer to client device. * @cb: Callback function. * @private: Private data passed to callback. * @@ -74,7 +75,7 @@ struct iio_cb_buffer; * So if the channels requested come from different devices this will * fail. */ -struct iio_cb_buffer *iio_channel_get_all_cb(const char *name, +struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, int (*cb)(u8 *data, void *private), void *private); diff --git a/include/linux/iio/driver.h b/include/linux/iio/driver.h index a4f8b2e05af..7dfb10ee266 100644 --- a/include/linux/iio/driver.h +++ b/include/linux/iio/driver.h @@ -22,13 +22,10 @@ int iio_map_array_register(struct iio_dev *indio_dev, struct iio_map *map); /** - * iio_map_array_unregister() - tell the core to remove consumer mappings + * iio_map_array_unregister() - tell the core to remove consumer mappings for + * the given provider device * @indio_dev: provider device - * @map: array of mappings to remove. Note these must have same memory - * addresses as those originally added not just equal parameter - * values. */ -int iio_map_array_unregister(struct iio_dev *indio_dev, - struct iio_map *map); +int iio_map_array_unregister(struct iio_dev *indio_dev); #endif diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h new file mode 100644 index 00000000000..c53f16914b7 --- /dev/null +++ b/include/linux/iio/gyro/itg3200.h @@ -0,0 +1,154 @@ +/* + * itg3200.h -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef I2C_ITG3200_H_ +#define I2C_ITG3200_H_ + +#include <linux/iio/iio.h> + +/* Register with I2C address (34h) */ +#define ITG3200_REG_ADDRESS 0x00 + +/* Sample rate divider + * Range: 0 to 255 + * Default value: 0x00 */ +#define ITG3200_REG_SAMPLE_RATE_DIV 0x15 + +/* Digital low pass filter settings */ +#define ITG3200_REG_DLPF 0x16 +/* DLPF full scale range */ +#define ITG3200_DLPF_FS_SEL_2000 0x18 +/* Bandwidth (Hz) and internal sample rate + * (kHz) of DLPF */ +#define ITG3200_DLPF_256_8 0x00 +#define ITG3200_DLPF_188_1 0x01 +#define ITG3200_DLPF_98_1 0x02 +#define ITG3200_DLPF_42_1 0x03 +#define ITG3200_DLPF_20_1 0x04 +#define ITG3200_DLPF_10_1 0x05 +#define ITG3200_DLPF_5_1 0x06 + +#define ITG3200_DLPF_CFG_MASK 0x07 + +/* Configuration for interrupt operations */ +#define ITG3200_REG_IRQ_CONFIG 0x17 +/* Logic level */ +#define ITG3200_IRQ_ACTIVE_LOW 0x80 +#define ITG3200_IRQ_ACTIVE_HIGH 0x00 +/* Drive type */ +#define ITG3200_IRQ_OPEN_DRAIN 0x40 +#define ITG3200_IRQ_PUSH_PULL 0x00 +/* Latch mode */ +#define ITG3200_IRQ_LATCH_UNTIL_CLEARED 0x20 +#define ITG3200_IRQ_LATCH_50US_PULSE 0x00 +/* Latch clear method */ +#define ITG3200_IRQ_LATCH_CLEAR_ANY 0x10 +#define ITG3200_IRQ_LATCH_CLEAR_STATUS 0x00 +/* Enable interrupt when device is ready */ +#define ITG3200_IRQ_DEVICE_RDY_ENABLE 0x04 +/* Enable interrupt when data is available */ +#define ITG3200_IRQ_DATA_RDY_ENABLE 0x01 + +/* Determine the status of ITG-3200 interrupts */ +#define ITG3200_REG_IRQ_STATUS 0x1A +/* Status of 'device is ready'-interrupt */ +#define ITG3200_IRQ_DEVICE_RDY_STATUS 0x04 +/* Status of 'data is available'-interrupt */ +#define ITG3200_IRQ_DATA_RDY_STATUS 0x01 + +/* Sensor registers */ +#define ITG3200_REG_TEMP_OUT_H 0x1B +#define ITG3200_REG_TEMP_OUT_L 0x1C +#define ITG3200_REG_GYRO_XOUT_H 0x1D +#define ITG3200_REG_GYRO_XOUT_L 0x1E +#define ITG3200_REG_GYRO_YOUT_H 0x1F +#define ITG3200_REG_GYRO_YOUT_L 0x20 +#define ITG3200_REG_GYRO_ZOUT_H 0x21 +#define ITG3200_REG_GYRO_ZOUT_L 0x22 + +/* Power management */ +#define ITG3200_REG_POWER_MANAGEMENT 0x3E +/* Reset device and internal registers to the + * power-up-default settings */ +#define ITG3200_RESET 0x80 +/* Enable low power sleep mode */ +#define ITG3200_SLEEP 0x40 +/* Put according gyroscope in standby mode */ +#define ITG3200_STANDBY_GYRO_X 0x20 +#define ITG3200_STANDBY_GYRO_Y 0x10 +#define ITG3200_STANDBY_GYRO_Z 0x08 +/* Determine the device clock source */ +#define ITG3200_CLK_INTERNAL 0x00 +#define ITG3200_CLK_GYRO_X 0x01 +#define ITG3200_CLK_GYRO_Y 0x02 +#define ITG3200_CLK_GYRO_Z 0x03 +#define ITG3200_CLK_EXT_32K 0x04 +#define ITG3200_CLK_EXT_19M 0x05 + + +/** + * struct itg3200 - device instance specific data + * @i2c: actual i2c_client + * @trig: data ready trigger from itg3200 pin + **/ +struct itg3200 { + struct i2c_client *i2c; + struct iio_trigger *trig; +}; + +enum ITG3200_SCAN_INDEX { + ITG3200_SCAN_TEMP, + ITG3200_SCAN_GYRO_X, + ITG3200_SCAN_GYRO_Y, + ITG3200_SCAN_GYRO_Z, + ITG3200_SCAN_ELEMENTS, +}; + +int itg3200_write_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 val); + +int itg3200_read_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 *val); + + +#ifdef CONFIG_IIO_BUFFER + +void itg3200_remove_trigger(struct iio_dev *indio_dev); +int itg3200_probe_trigger(struct iio_dev *indio_dev); + +int itg3200_buffer_configure(struct iio_dev *indio_dev); +void itg3200_buffer_unconfigure(struct iio_dev *indio_dev); + +#else /* CONFIG_IIO_BUFFER */ + +static inline void itg3200_remove_trigger(struct iio_dev *indio_dev) +{ +} + +static inline int itg3200_probe_trigger(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline int itg3200_buffer_configure(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void itg3200_buffer_unconfigure(struct iio_dev *indio_dev) +{ +} + +#endif /* CONFIG_IIO_RING_BUFFER */ + +#endif /* ITG3200_H_ */ |