diff options
198 files changed, 3732 insertions, 3047 deletions
diff --git a/Documentation/mips/00-INDEX b/Documentation/mips/00-INDEX index 3f13bf8043d..8ae9cffc226 100644 --- a/Documentation/mips/00-INDEX +++ b/Documentation/mips/00-INDEX @@ -2,5 +2,3 @@ - this file. AU1xxx_IDE.README - README for MIPS AU1XXX IDE driver. -GT64120.README - - README for dir with info on MIPS boards using GT-64120 or GT-64120A. diff --git a/Documentation/mips/GT64120.README b/Documentation/mips/GT64120.README deleted file mode 100644 index 2d0eec91dc5..00000000000 --- a/Documentation/mips/GT64120.README +++ /dev/null @@ -1,65 +0,0 @@ -README for arch/mips/gt64120 directory and subdirectories - -Jun Sun, jsun@mvista.com or jsun@junsun.net -01/27, 2001 - -MOTIVATION ----------- - -Many MIPS boards share the same system controller (or CPU companian chip), -such as GT-64120. It is highly desirable to let these boards share -the same controller code instead of duplicating them. - -This directory is meant to hold all MIPS boards that use GT-64120 or GT-64120A. - - -HOW TO ADD A BOARD ------------------- - -. Create a subdirectory include/asm/gt64120/<board>. - -. Create a file called gt64120_dep.h under that directory. - -. Modify include/asm/gt64120/gt64120.h file to include the new gt64120_dep.h - based on config options. The board-dep section is at the end of - include/asm/gt64120/gt64120.h file. There you can find all required - definitions include/asm/gt64120/<board>/gt64120_dep.h file must supply. - -. Create a subdirectory arch/mips/gt64120/<board> directory to hold - board specific routines. - -. The GT-64120 common code is supplied under arch/mips/gt64120/common directory. - It includes: - 1) arch/mips/gt64120/pci.c - - common PCI routine, include the top-level pcibios_init() - 2) arch/mips/gt64120/irq.c - - common IRQ routine, include the top-level do_IRQ() - [This part really belongs to arch/mips/kernel. jsun] - 3) arch/mips/gt64120/gt_irq.c - - common IRQ routines for GT-64120 chip. Currently it only handles - the timer interrupt. - -. Board-specific routines are supplied under arch/mips/gt64120/<board> dir. - 1) arch/mips/gt64120/<board>/pci.c - it provides bus fixup routine - 2) arch/mips/gt64120/<board>/irq.c - it provides enable/disable irqs - and board irq setup routine (irq_setup) - 3) arch/mips/gt64120/<board>/int-handler.S - - The first-level interrupt dispatching routine. - 4) a bunch of other "normal" stuff (setup, prom, dbg_io, reset, etc) - -. Follow other "normal" procedure to modify configuration files, etc. - - -TO-DO LIST ----------- - -. Expand arch/mips/gt64120/gt_irq.c to handle all GT-64120 interrupts. - We probably need to introduce GT_IRQ_BASE in board-dep header file, - which is used the starting irq_nr for all GT irqs. - - A function, gt64120_handle_irq(), will be added so that the first-level - irq dispatcher will call this function if it detects an interrupt - from GT-64120. - -. More support for GT-64120 PCI features (2nd PCI bus, perhaps) - diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b22c043b6ef..6b0f85f02c7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -37,16 +37,6 @@ config BASLER_EXCITE The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG. -config BASLER_EXCITE_PROTOTYPE - bool "Support for pre-release units" - depends on BASLER_EXCITE - default n - help - Pre-series (prototype) units are different from later ones in - some ways. Select this option if you have one of these. Please - note that a kernel built with this option selected will not be - able to run on normal units. - config BCM47XX bool "BCM47XX based boards" select CEVT_R4K @@ -82,7 +72,7 @@ config MIPS_COBALT select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select GENERIC_HARDIRQS_NO__DO_IRQ @@ -91,6 +81,9 @@ config MACH_DECSTATION select BOOT_ELF32 select CEVT_R4K select CSRC_R4K + select CPU_DADDI_WORKAROUNDS if 64BIT + select CPU_R4000_WORKAROUNDS if 64BIT + select CPU_R4400_WORKAROUNDS if 64BIT select DMA_NONCOHERENT select NO_IOPORT select IRQ_CPU @@ -124,12 +117,12 @@ config MACH_JAZZ select ARCH_MAY_HAVE_PC_FDC select CEVT_R4K select CSRC_R4K + select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN select GENERIC_ISA_DMA select IRQ_CPU select I8253 select I8259 select ISA - select PCSPEAKER select SYS_HAS_CPU_R4X00 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL @@ -187,6 +180,7 @@ config LEMOTE_FULONG config MIPS_ATLAS bool "MIPS Atlas board" select BOOT_ELF32 + select BOOT_RAW select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT @@ -219,6 +213,7 @@ config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 + select BOOT_RAW select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT @@ -364,35 +359,6 @@ config PMC_YOSEMITE Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra. -config QEMU - bool "Qemu" - select CEVT_R4K - select CSRC_R4K - select DMA_COHERENT - select GENERIC_ISA_DMA - select HAVE_STD_PC_SERIAL_PORT - select I8253 - select I8259 - select IRQ_CPU - select ISA - select PCSPEAKER - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - select NR_CPUS_DEFAULT_1 - select SYS_SUPPORTS_SMP - help - Qemu is a software emulator which among other architectures also - can simulate a MIPS32 4Kc system. This patch adds support for the - system architecture that currently is being simulated by Qemu. It - will eventually be removed again when Qemu has the capability to - simulate actual MIPS hardware platforms. More information on Qemu - can be found at http://www.linux-mips.org/wiki/Qemu. - config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select ARC @@ -400,6 +366,7 @@ config SGI_IP22 select BOOT_ELF32 select CEVT_R4K select CSRC_R4K + select DEFAULT_SGI_PARTITION select DMA_NONCOHERENT select HW_HAS_EISA select I8253 @@ -407,6 +374,12 @@ config SGI_IP22 select IP22_CPU_SCACHE select IRQ_CPU select GENERIC_ISA_DMA_SUPPORT_BROKEN + select SGI_HAS_DS1286 + select SGI_HAS_I8042 + select SGI_HAS_INDYDOG + select SGI_HAS_SEEQ + select SGI_HAS_WD93 + select SGI_HAS_ZILOG select SWAP_IO_SPACE select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 @@ -424,6 +397,7 @@ config SGI_IP27 select ARC select ARC64 select BOOT_ELF64 + select DEFAULT_SGI_PARTITION select DMA_IP27 select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI @@ -440,6 +414,36 @@ config SGI_IP27 workstations. To compile a Linux kernel that runs on these, say Y here. +config SGI_IP28 + bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)" + depends on EXPERIMENTAL + select ARC + select ARC64 + select BOOT_ELF64 + select CEVT_R4K + select CSRC_R4K + select DEFAULT_SGI_PARTITION + select DMA_NONCOHERENT + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select IRQ_CPU + select HW_HAS_EISA + select I8253 + select I8259 + select SGI_HAS_DS1286 + select SGI_HAS_I8042 + select SGI_HAS_INDYDOG + select SGI_HAS_SEEQ + select SGI_HAS_WD93 + select SGI_HAS_ZILOG + select SWAP_IO_SPACE + select SYS_HAS_CPU_R10000 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + help + This is the SGI Indigo2 with R10000 processor. To compile a Linux + kernel that runs on these, say Y here. + config SGI_IP32 bool "SGI IP32 (O2)" select ARC @@ -545,19 +549,6 @@ config SIBYTE_SENTOSA select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN -config SIBYTE_PTSWARM - bool "Sibyte BCM91250PT-PTSWARM" - depends on EXPERIMENTAL - select BOOT_ELF32 - select DMA_COHERENT - select NR_CPUS_DEFAULT_2 - select SIBYTE_SB1250 - select SWAP_IO_SPACE - select SYS_HAS_CPU_SB1 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - config SIBYTE_BIGSUR bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 @@ -575,10 +566,12 @@ config SNI_RM bool "SNI RM200/300/400" select ARC if CPU_LITTLE_ENDIAN select ARC32 if CPU_LITTLE_ENDIAN + select SNIPROM if CPU_BIG_ENDIAN select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select CEVT_R4K select CSRC_R4K + select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN select DMA_NONCOHERENT select GENERIC_ISA_DMA select HW_HAS_EISA @@ -587,7 +580,6 @@ config SNI_RM select I8253 select I8259 select ISA - select PCSPEAKER select SWAP_IO_SPACE if CPU_BIG_ENDIAN select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 @@ -690,6 +682,7 @@ config WR_PPMC endchoice source "arch/mips/au1000/Kconfig" +source "arch/mips/basler/excite/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -797,10 +790,6 @@ config DMA_COHERENT config DMA_IP27 bool -config DMA_IP32 - bool - select DMA_NEED_PCI_MAP_STATE - config DMA_NONCOHERENT bool select DMA_NEED_PCI_MAP_STATE @@ -956,16 +945,40 @@ config EMMA2RH config SERIAL_RM9000 bool +config SGI_HAS_DS1286 + bool + +config SGI_HAS_INDYDOG + bool + +config SGI_HAS_SEEQ + bool + +config SGI_HAS_WD93 + bool + +config SGI_HAS_ZILOG + bool + +config SGI_HAS_I8042 + bool + +config DEFAULT_SGI_PARTITION + bool + config ARC32 bool +config SNIPROM + bool + config BOOT_ELF32 bool config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SNI_RM + default "7" if SGI_IP27 || SGI_IP28 || SNI_RM default "4" if PMC_MSP4200_EVAL default "5" @@ -974,7 +987,7 @@ config HAVE_STD_PC_SERIAL_PORT config ARC_CONSOLE bool "ARC console support" - depends on SGI_IP22 || (SNI_RM && CPU_LITTLE_ENDIAN) + depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) config ARC_MEMORY bool @@ -983,7 +996,7 @@ config ARC_MEMORY config ARC_PROMLIB bool - depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32 + depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 default y config ARC64 @@ -1443,7 +1456,9 @@ config MIPS_MT_SMP select MIPS_MT select NR_CPUS_DEFAULT_2 select SMP + select SYS_SUPPORTS_SCHED_SMT if SMP select SYS_SUPPORTS_SMP + select SMP_UP help This is a kernel model which is also known a VSMP or lately has been marketesed into SMVP. @@ -1460,6 +1475,7 @@ config MIPS_MT_SMTC select NR_CPUS_DEFAULT_8 select SMP select SYS_SUPPORTS_SMP + select SMP_UP help This is a kernel model which is known a SMTC or lately has been marketesed into SMVP. @@ -1469,6 +1485,19 @@ endchoice config MIPS_MT bool +config SCHED_SMT + bool "SMT (multithreading) scheduler support" + depends on SYS_SUPPORTS_SCHED_SMT + default n + help + SMT scheduler support improves the CPU scheduler's decision making + when dealing with MIPS MT enabled cores at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SYS_SUPPORTS_SCHED_SMT + bool + + config SYS_SUPPORTS_MULTITHREADING bool @@ -1589,15 +1618,6 @@ config CPU_HAS_SMARTMIPS config CPU_HAS_WB bool -config 64BIT_CONTEXT - bool "Save 64bit integer registers" - depends on 32BIT && CPU_LOONGSON2 - help - Loongson2 CPU is 64bit , when used in 32BIT mode, its integer - registers can still be accessed as 64bit, mainly for multimedia - instructions. We must have all 64bit save/restored to make sure - those instructions to get correct result. - # # Vectored interrupt mode is an R2 feature # @@ -1619,6 +1639,19 @@ config GENERIC_CLOCKEVENTS_BROADCAST bool # +# CPU non-features +# +config CPU_DADDI_WORKAROUNDS + bool + +config CPU_R4000_WORKAROUNDS + bool + select CPU_R4400_WORKAROUNDS + +config CPU_R4400_WORKAROUNDS + bool + +# # Use the generic interrupt handling code in kernel/irq/: # config GENERIC_HARDIRQS @@ -1721,6 +1754,9 @@ config SMP If you don't know what to do here, say N. +config SMP_UP + bool + config SYS_SUPPORTS_SMP bool @@ -1978,9 +2014,6 @@ config MMU config I8253 bool -config PCSPEAKER - bool - config ZONE_DMA32 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index a1f8d8b96b0..3fb7f3065c9 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -141,6 +141,10 @@ cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ -Wa,--trap +cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) +cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) +cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) + ifdef CONFIG_CPU_SB1 ifdef CONFIG_SB1_PASS_1_WORKAROUNDS MODFLAGS += -msb1-pass1-workarounds @@ -152,6 +156,8 @@ endif # libs-$(CONFIG_ARC) += arch/mips/fw/arc/ libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ +libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ +libs-y += arch/mips/fw/lib/ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ # @@ -308,7 +314,7 @@ core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/ cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000 -all-$(CONFIG_MIPS_ATLAS) := vmlinux.srec +all-$(CONFIG_MIPS_ATLAS) := vmlinux.bin # # MIPS Malta board @@ -316,7 +322,7 @@ all-$(CONFIG_MIPS_ATLAS) := vmlinux.srec core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/ cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 -all-$(CONFIG_MIPS_MALTA) := vmlinux.srec +all-$(CONFIG_MIPS_MALTA) := vmlinux.bin # # MIPS SEAD board @@ -349,14 +355,6 @@ cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 # -# Qemu simulating MIPS32 4Kc -# -core-$(CONFIG_QEMU) += arch/mips/qemu/ -cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu -load-$(CONFIG_QEMU) += 0xffffffff80010000 -all-$(CONFIG_QEMU) := vmlinux.bin - -# # Basler eXcite # core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ @@ -475,6 +473,20 @@ endif endif # +# SGI IP28 (Indigo2 R10k) +# +# Set the load address to >= 0xa800000020080000 if you want to leave space for +# symmon, 0xa800000020004000 for production kernels ? Note that the value must +# be 16kb aligned or the handling of the current variable will break. +# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys +# +#core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o +core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28 +#cflags-$(CONFIG_SGI_IP28) += -Iinclude/asm-mips/mach-ip28 +load-$(CONFIG_SGI_IP28) += 0xa800000020004000 + +# # SGI-IP32 (O2) # # Set the load address to >= 80069000 if you want to leave space for symmon, @@ -602,9 +614,11 @@ ifdef CONFIG_64BIT endif endif - ifeq ($(KBUILD_SYM32), y) - ifeq ($(call cc-option-yn,-msym32), y) - cflags-y += -msym32 -DKBUILD_64BIT_SYM32 + ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy) + cflags-y += -msym32 -DKBUILD_64BIT_SYM32 + else + ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y) + $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32) endif endif endif diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c index 98a4e34b024..37a10a01de9 100644 --- a/arch/mips/au1000/common/au1xxx_irqmap.c +++ b/arch/mips/au1000/common/au1xxx_irqmap.c @@ -25,27 +25,10 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/errno.h> #include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/delay.h> -#include <linux/bitops.h> +#include <linux/kernel.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/mach-au1x00/au1000.h> +#include <au1000.h> /* The IC0 interrupt table. This is processor, rather than * board dependent, so no reason to keep this info in the board diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index edf91f41a78..428ed275a0f 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -179,7 +179,7 @@ static dbdev_tab_t dbdev_tab[] = { { 0, 0, 0, 0, 0, 0, 0 }, }; -#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t)) +#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c index 43298fd9459..e822c123eab 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/au1000/db1x00/init.c @@ -57,17 +57,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - /* Set the platform # */ -#if defined(CONFIG_MIPS_DB1550) - mips_machtype = MACH_DB1550; -#elif defined(CONFIG_MIPS_DB1500) - mips_machtype = MACH_DB1500; -#elif defined(CONFIG_MIPS_DB1100) - mips_machtype = MACH_DB1100; -#else - mips_machtype = MACH_DB1000; -#endif - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c index cdeae3212a2..e700fd312a2 100644 --- a/arch/mips/au1000/mtx-1/init.c +++ b/arch/mips/au1000/mtx-1/init.c @@ -54,8 +54,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - mips_machtype = MACH_MTX1; /* set the platform # */ - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c index 49c0fb409fe..ce8637b3afa 100644 --- a/arch/mips/au1000/mtx-1/platform.c +++ b/arch/mips/au1000/mtx-1/platform.c @@ -22,9 +22,32 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <asm/gpio.h> +static struct gpio_keys_button mtx1_gpio_button[] = { + { + .gpio = 207, + .code = BTN_0, + .desc = "System button", + } +}; + +static struct gpio_keys_platform_data mtx1_buttons_data = { + .buttons = mtx1_gpio_button, + .nbuttons = ARRAY_SIZE(mtx1_gpio_button), +}; + +static struct platform_device mtx1_button = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mtx1_buttons_data, + } +}; + static struct resource mtx1_wdt_res[] = { [0] = { .start = 15, @@ -66,11 +89,13 @@ static struct platform_device mtx1_gpio_leds = { static struct __initdata platform_device * mtx1_devs[] = { &mtx1_gpio_leds, - &mtx1_wdt + &mtx1_wdt, + &mtx1_button }; static int __init mtx1_register_devices(void) { + gpio_direction_input(207); return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); } diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c index ddccaf6997d..2515b9fb24a 100644 --- a/arch/mips/au1000/pb1000/init.c +++ b/arch/mips/au1000/pb1000/init.c @@ -52,8 +52,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - mips_machtype = MACH_PB1000; - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); if (!memsize_str) { diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c index c93fd39b4ab..490c3801c27 100644 --- a/arch/mips/au1000/pb1100/init.c +++ b/arch/mips/au1000/pb1100/init.c @@ -53,8 +53,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg3; - mips_machtype = MACH_PB1100; - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c index c251570749e..069ed45f04f 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/au1000/pb1200/init.c @@ -53,8 +53,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - mips_machtype = MACH_PB1200; - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); if (!memsize_str) { diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c index 507d4b20416..db558c96704 100644 --- a/arch/mips/au1000/pb1500/init.c +++ b/arch/mips/au1000/pb1500/init.c @@ -53,8 +53,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - mips_machtype = MACH_PB1500; - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); if (!memsize_str) { diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c index b03eee601e3..b716363ea56 100644 --- a/arch/mips/au1000/pb1550/init.c +++ b/arch/mips/au1000/pb1550/init.c @@ -53,8 +53,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - mips_machtype = MACH_PB1550; - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); if (!memsize_str) { diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c index 6532939f377..7e6878c1b0a 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/au1000/xxs1500/init.c @@ -52,8 +52,6 @@ void __init prom_init(void) prom_argv = (char **) fw_arg1; prom_envp = (char **) fw_arg2; - mips_machtype = MACH_XXS1500; /* set the platform # */ - prom_init_cmdline(); memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig new file mode 100644 index 00000000000..ba506075608 --- /dev/null +++ b/arch/mips/basler/excite/Kconfig @@ -0,0 +1,9 @@ +config BASLER_EXCITE_PROTOTYPE + bool "Support for pre-release units" + depends on BASLER_EXCITE + default n + help + Pre-series (prototype) units are different from later ones in + some ways. Select this option if you have one of these. Please + note that a kernel built with this option selected will not be + able to run on normal units. diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c index 6af0b21ebc3..476d20e08d0 100644 --- a/arch/mips/basler/excite/excite_iodev.c +++ b/arch/mips/basler/excite/excite_iodev.c @@ -48,7 +48,7 @@ static DECLARE_WAIT_QUEUE_HEAD(wq); -static struct file_operations fops = +static const struct file_operations fops = { .owner = THIS_MODULE, .open = iodev_open, diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c index 2d752c2f6e5..68d8bc597e3 100644 --- a/arch/mips/basler/excite/excite_prom.c +++ b/arch/mips/basler/excite/excite_prom.c @@ -135,8 +135,6 @@ void __init prom_init(void) #ifdef CONFIG_64BIT # error 64 bit support not implemented #endif /* CONFIG_64BIT */ - - mips_machtype = MACH_TITAN_EXCITE; } /* This is called from free_initmem(), so we need to provide it */ diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 71eb4ccc4bc..516b4428df4 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -10,9 +10,10 @@ */ #include <linux/init.h> #include <linux/io.h> -#include <linux/jiffies.h> #include <linux/leds.h> +#include <asm/processor.h> + #include <cobalt.h> #define RESET_PORT ((void __iomem *)CKSEG1ADDR(0x1c000000)) @@ -29,28 +30,15 @@ device_initcall(ledtrig_power_off_init); void cobalt_machine_halt(void) { - int state, last, diff; - unsigned long mark; - /* * turn on power off LED on RaQ - * - * restart if ENTER and SELECT are pressed */ - - last = COBALT_KEY_PORT; - led_trigger_event(power_off_led_trigger, LED_FULL); - for (state = 0;;) { - diff = COBALT_KEY_PORT ^ last; - last ^= diff; - - if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT))) - writeb(RESET, RESET_PORT); - - for (mark = jiffies; jiffies - mark < HZ;) - ; + local_irq_disable(); + while (1) { + if (cpu_wait) + cpu_wait(); } } diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 62bcc887f2c..3443f6cd57b 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -37,7 +37,6 @@ CONFIG_MIPS_ATLAS=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_MIPS_ATLAS=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 3c70c9d16d0..abf70d74e9d 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_SIBYTE_BIGSUR=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 8ecbbb226c7..a94f14b5c8f 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 36c13039e23..b7295e98838 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -24,7 +24,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 5a8b7acb7dd..36578968d38 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index d4ed90bca26..5a90740c363 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index a055657e698..76f37a1159f 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 0ad08cf446e..508c91944f3 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 057c7d429c8..0c2c70d21db 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 2fb35043266..58c2cd68c3a 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -37,7 +37,6 @@ CONFIG_MACH_DECSTATION=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_MACH_DECSTATION=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index d0d07faeb84..90d81f5dceb 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index d73d965f761..f9a003c2b3a 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set CONFIG_MARKEINS=y # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_MARKEINS=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 17a866057fd..15efacc75d7 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -38,7 +38,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 4ef39a0527c..5887a1735fb 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -23,7 +23,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -33,7 +32,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 670039bb1a7..4f5e56c9335 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set CONFIG_SGI_IP22=y # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -36,7 +35,6 @@ CONFIG_SGI_IP22=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 892d4c38fd0..f40e437bd9e 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -24,7 +24,6 @@ CONFIG_MIPS=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set CONFIG_SGI_IP27=y # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_SGI_IP27=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 47f49b60c5d..2c5c624c5d4 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_SGI_IP32=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index fa655e247ec..56148745e8f 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -37,7 +37,6 @@ CONFIG_MACH_JAZZ=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_MACH_JAZZ=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index eb96791c33e..a7cd67753aa 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -24,7 +24,6 @@ CONFIG_MIPS=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MIPS=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set CONFIG_TOSHIBA_JMR3927=y @@ -464,7 +462,6 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_R3964 is not set @@ -482,6 +479,20 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # Multifunction device drivers diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 2c665fcef08..e6aef999854 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -25,7 +25,6 @@ CONFIG_LASAT=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -36,7 +35,6 @@ CONFIG_LASAT=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 4b7e43c9f69..3d0da952811 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -25,7 +25,6 @@ CONFIG_MIPS_MALTA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -36,7 +35,6 @@ CONFIG_MIPS_MALTA=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 61b72f5a953..6db0bdaefb2 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -26,7 +26,6 @@ CONFIG_MIPS_SIM=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -37,7 +36,6 @@ CONFIG_MIPS_SIM=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 8334350d722..27e23fc9363 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 69278999c9a..b12b73f6d74 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -38,7 +38,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_VR41XX is not set CONFIG_PMC_MSP=y # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_PMC_MSP=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index b536d7c6379..fa3aa391944 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set @@ -1617,6 +1615,7 @@ CONFIG_INPUT_EVBUG=m # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_LKKBD=m CONFIG_KEYBOARD_XTKBD=m diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 703d28db05b..1d0157d3a5b 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 82f0c5cee0d..d0491a05ee5 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 147a4fc7fdd..16d78d3cd2a 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -38,7 +38,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -48,7 +47,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index f6906b069e0..518a60892b7 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -37,7 +37,6 @@ CONFIG_PNX8550_JBS=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_PNX8550_JBS=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index b741f81696f..68351eb81bc 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y CONFIG_PNX8550_STB810=y # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_PNX8550_STB810=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index b3caf5125c1..72ca147f942 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -CONFIG_QEMU=y # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_QEMU=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 9383a598094..470f6f4d3ea 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -24,7 +24,6 @@ CONFIG_MIPS=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MIPS=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set @@ -431,7 +429,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_R3964 is not set @@ -449,6 +446,20 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # Multifunction device drivers diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index d1b56cc0fd7..5a39f56b175 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -24,7 +24,6 @@ CONFIG_MIPS=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MIPS=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set @@ -450,7 +448,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_R3964 is not set @@ -479,6 +476,20 @@ CONFIG_SPI_AT25=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # Multifunction device drivers diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index fc388118b11..56371b860eb 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_ZONE_DMA=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index c2798229cbf..117470b60e3 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_SIBYTE_SWARM=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 2b6282d132a..3ee75b15c0b 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -37,7 +37,6 @@ CONFIG_MIPS_SEAD=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_MIPS_SEAD=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 326aa7aa40e..af82e1a1823 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 9fd0faeacf5..a95385b2454 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 499b6bd7ee6..40d4a40a970 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index b52256ca0b5..edf90b321fe 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 7e410e10fed..2e3c683b205 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -37,7 +37,6 @@ CONFIG_WR_PPMC=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_WR_PPMC=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index acaf0e21bb0..b6178ffbc52 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set CONFIG_PMC_YOSEMITE=y -# CONFIG_QEMU is not set # CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -47,7 +46,6 @@ CONFIG_PMC_YOSEMITE=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 820e5331205..60349062595 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -161,7 +161,6 @@ static cycle_t dec_ioasic_hpt_read(void) void __init plat_time_init(void) { - mips_timer_state = dec_timer_state; mips_timer_ack = dec_timer_ack; if (!cpu_has_counter && IOASIC) diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 670039bb1a7..4f5e56c9335 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set CONFIG_SGI_IP22=y # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -36,7 +35,6 @@ CONFIG_SGI_IP22=y # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c index fd604ef2882..4ca4eef934a 100644 --- a/arch/mips/fw/arc/cmdline.c +++ b/arch/mips/fw/arc/cmdline.c @@ -52,7 +52,7 @@ static char * __init move_firmware_args(char* cp) strcat(cp, used_arc[i][1]); cp += strlen(used_arc[i][1]); /* ... and now the argument */ - s = strstr(prom_argv(actr), "="); + s = strchr(prom_argv(actr), '='); if (s) { s++; strcpy(cp, s); diff --git a/arch/mips/fw/arc/init.c b/arch/mips/fw/arc/init.c index e2f75b13312..3ad8788b6ea 100644 --- a/arch/mips/fw/arc/init.c +++ b/arch/mips/fw/arc/init.c @@ -12,6 +12,7 @@ #include <asm/bootinfo.h> #include <asm/sgialib.h> +#include <asm/smp-ops.h> #undef DEBUG_PROM_INIT @@ -48,4 +49,11 @@ void __init prom_init(void) ArcRead(0, &c, 1, &cnt); ArcEnterInteractiveMode(); #endif +#ifdef CONFIG_SGI_IP27 + { + extern struct plat_smp_ops ip27_smp_ops; + + register_smp_ops(&ip27_smp_ops); + } +#endif } diff --git a/arch/mips/fw/cfe/cfe_api.c b/arch/mips/fw/cfe/cfe_api.c index a9f69e4e40a..717db74f7c6 100644 --- a/arch/mips/fw/cfe/cfe_api.c +++ b/arch/mips/fw/cfe/cfe_api.c @@ -16,19 +16,16 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -/* ********************************************************************* - * - * Broadcom Common Firmware Environment (CFE) - * - * Device Function stubs File: cfe_api.c - * - * This module contains device function stubs (small routines to - * call the standard "iocb" interface entry point to CFE). - * There should be one routine here per iocb function call. - * - * Authors: Mitch Lichtenberg, Chris Demetriou - * - ********************************************************************* */ +/* + * + * Broadcom Common Firmware Environment (CFE) + * + * This module contains device function stubs (small routines to + * call the standard "iocb" interface entry point to CFE). + * There should be one routine here per iocb function call. + * + * Authors: Mitch Lichtenberg, Chris Demetriou + */ #include <asm/fw/cfe/cfe_api.h> #include "cfe_api_int.h" @@ -37,12 +34,8 @@ #define XPTR_FROM_NATIVE(n) ((cfe_xptr_t) (intptr_t) (n)) #define NATIVE_FROM_XPTR(x) ((void *) (intptr_t) (x)) -#ifdef CFE_API_IMPL_NAMESPACE -#define cfe_iocb_dispatch(a) __cfe_iocb_dispatch(a) -#endif -int cfe_iocb_dispatch(cfe_xiocb_t * xiocb); +int cfe_iocb_dispatch(struct cfe_xiocb *xiocb); -#if defined(CFE_API_common) || defined(CFE_API_ALL) /* * Declare the dispatch function with args of "intptr_t". * This makes sure whatever model we're compiling in @@ -53,27 +46,25 @@ int cfe_iocb_dispatch(cfe_xiocb_t * xiocb); */ static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb) = 0; -static cfe_xuint_t cfe_handle = 0; +static u64 cfe_handle = 0; -int cfe_init(cfe_xuint_t handle, cfe_xuint_t ept) +int cfe_init(u64 handle, u64 ept) { cfe_dispfunc = NATIVE_FROM_XPTR(ept); cfe_handle = handle; return 0; } -int cfe_iocb_dispatch(cfe_xiocb_t * xiocb) +int cfe_iocb_dispatch(struct cfe_xiocb * xiocb) { if (!cfe_dispfunc) return -1; return (*cfe_dispfunc) ((intptr_t) cfe_handle, (intptr_t) xiocb); } -#endif /* CFE_API_common || CFE_API_ALL */ -#if defined(CFE_API_close) || defined(CFE_API_ALL) int cfe_close(int handle) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_CLOSE; xiocb.xiocb_status = 0; @@ -86,18 +77,16 @@ int cfe_close(int handle) return xiocb.xiocb_status; } -#endif /* CFE_API_close || CFE_API_ALL */ -#if defined(CFE_API_cpu_start) || defined(CFE_API_ALL) int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_CPUCTL; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_cpuctl_t); + xiocb.xiocb_psize = sizeof(struct xiocb_cpuctl); xiocb.plist.xiocb_cpuctl.cpu_number = cpu; xiocb.plist.xiocb_cpuctl.cpu_command = CFE_CPU_CMD_START; xiocb.plist.xiocb_cpuctl.gp_val = gp; @@ -109,18 +98,16 @@ int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1) return xiocb.xiocb_status; } -#endif /* CFE_API_cpu_start || CFE_API_ALL */ -#if defined(CFE_API_cpu_stop) || defined(CFE_API_ALL) int cfe_cpu_stop(int cpu) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_CPUCTL; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_cpuctl_t); + xiocb.xiocb_psize = sizeof(struct xiocb_cpuctl); xiocb.plist.xiocb_cpuctl.cpu_number = cpu; xiocb.plist.xiocb_cpuctl.cpu_command = CFE_CPU_CMD_STOP; @@ -128,18 +115,16 @@ int cfe_cpu_stop(int cpu) return xiocb.xiocb_status; } -#endif /* CFE_API_cpu_stop || CFE_API_ALL */ -#if defined(CFE_API_enumenv) || defined(CFE_API_ALL) int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_ENV_SET; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_envbuf_t); + xiocb.xiocb_psize = sizeof(struct xiocb_envbuf); xiocb.plist.xiocb_envbuf.enum_idx = idx; xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name); xiocb.plist.xiocb_envbuf.name_length = namelen; @@ -150,20 +135,17 @@ int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen) return xiocb.xiocb_status; } -#endif /* CFE_API_enumenv || CFE_API_ALL */ -#if defined(CFE_API_enummem) || defined(CFE_API_ALL) int -cfe_enummem(int idx, int flags, cfe_xuint_t * start, cfe_xuint_t * length, - cfe_xuint_t * type) +cfe_enummem(int idx, int flags, u64 *start, u64 *length, u64 *type) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_MEMENUM; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = flags; - xiocb.xiocb_psize = sizeof(xiocb_meminfo_t); + xiocb.xiocb_psize = sizeof(struct xiocb_meminfo); xiocb.plist.xiocb_meminfo.mi_idx = idx; cfe_iocb_dispatch(&xiocb); @@ -177,30 +159,26 @@ cfe_enummem(int idx, int flags, cfe_xuint_t * start, cfe_xuint_t * length, return 0; } -#endif /* CFE_API_enummem || CFE_API_ALL */ -#if defined(CFE_API_exit) || defined(CFE_API_ALL) int cfe_exit(int warm, int status) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_RESTART; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = warm ? CFE_FLG_WARMSTART : 0; - xiocb.xiocb_psize = sizeof(xiocb_exitstat_t); + xiocb.xiocb_psize = sizeof(struct xiocb_exitstat); xiocb.plist.xiocb_exitstat.status = status; cfe_iocb_dispatch(&xiocb); return xiocb.xiocb_status; } -#endif /* CFE_API_exit || CFE_API_ALL */ -#if defined(CFE_API_flushcache) || defined(CFE_API_ALL) int cfe_flushcache(int flg) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_FLUSHCACHE; xiocb.xiocb_status = 0; @@ -212,34 +190,30 @@ int cfe_flushcache(int flg) return xiocb.xiocb_status; } -#endif /* CFE_API_flushcache || CFE_API_ALL */ -#if defined(CFE_API_getdevinfo) || defined(CFE_API_ALL) int cfe_getdevinfo(char *name) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_GETINFO; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_buffer_t); + xiocb.xiocb_psize = sizeof(struct xiocb_buffer); xiocb.plist.xiocb_buffer.buf_offset = 0; xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(name); - xiocb.plist.xiocb_buffer.buf_length = cfe_strlen(name); + xiocb.plist.xiocb_buffer.buf_length = strlen(name); cfe_iocb_dispatch(&xiocb); if (xiocb.xiocb_status < 0) return xiocb.xiocb_status; - return xiocb.plist.xiocb_buffer.buf_devflags; + return xiocb.plist.xiocb_buffer.buf_ioctlcmd; } -#endif /* CFE_API_getdevinfo || CFE_API_ALL */ -#if defined(CFE_API_getenv) || defined(CFE_API_ALL) int cfe_getenv(char *name, char *dest, int destlen) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; *dest = 0; @@ -247,10 +221,10 @@ int cfe_getenv(char *name, char *dest, int destlen) xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_envbuf_t); + xiocb.xiocb_psize = sizeof(struct xiocb_envbuf); xiocb.plist.xiocb_envbuf.enum_idx = 0; xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name); - xiocb.plist.xiocb_envbuf.name_length = cfe_strlen(name); + xiocb.plist.xiocb_envbuf.name_length = strlen(name); xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(dest); xiocb.plist.xiocb_envbuf.val_length = destlen; @@ -258,18 +232,16 @@ int cfe_getenv(char *name, char *dest, int destlen) return xiocb.xiocb_status; } -#endif /* CFE_API_getenv || CFE_API_ALL */ -#if defined(CFE_API_getfwinfo) || defined(CFE_API_ALL) int cfe_getfwinfo(cfe_fwinfo_t * info) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_GETINFO; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_fwinfo_t); + xiocb.xiocb_psize = sizeof(struct xiocb_fwinfo); cfe_iocb_dispatch(&xiocb); @@ -292,12 +264,10 @@ int cfe_getfwinfo(cfe_fwinfo_t * info) return 0; } -#endif /* CFE_API_getfwinfo || CFE_API_ALL */ -#if defined(CFE_API_getstdhandle) || defined(CFE_API_ALL) int cfe_getstdhandle(int flg) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_GETHANDLE; xiocb.xiocb_status = 0; @@ -311,23 +281,17 @@ int cfe_getstdhandle(int flg) return xiocb.xiocb_status; return xiocb.xiocb_handle; } -#endif /* CFE_API_getstdhandle || CFE_API_ALL */ -#if defined(CFE_API_getticks) || defined(CFE_API_ALL) int64_t -#ifdef CFE_API_IMPL_NAMESPACE -__cfe_getticks(void) -#else cfe_getticks(void) -#endif { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_FW_GETTIME; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_time_t); + xiocb.xiocb_psize = sizeof(struct xiocb_time); xiocb.plist.xiocb_time.ticks = 0; cfe_iocb_dispatch(&xiocb); @@ -335,18 +299,16 @@ cfe_getticks(void) return xiocb.plist.xiocb_time.ticks; } -#endif /* CFE_API_getticks || CFE_API_ALL */ -#if defined(CFE_API_inpstat) || defined(CFE_API_ALL) int cfe_inpstat(int handle) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_INPSTAT; xiocb.xiocb_status = 0; xiocb.xiocb_handle = handle; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_inpstat_t); + xiocb.xiocb_psize = sizeof(struct xiocb_inpstat); xiocb.plist.xiocb_inpstat.inp_status = 0; cfe_iocb_dispatch(&xiocb); @@ -355,20 +317,18 @@ int cfe_inpstat(int handle) return xiocb.xiocb_status; return xiocb.plist.xiocb_inpstat.inp_status; } -#endif /* CFE_API_inpstat || CFE_API_ALL */ -#if defined(CFE_API_ioctl) || defined(CFE_API_ALL) int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, - int length, int *retlen, cfe_xuint_t offset) + int length, int *retlen, u64 offset) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_IOCTL; xiocb.xiocb_status = 0; xiocb.xiocb_handle = handle; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_buffer_t); + xiocb.xiocb_psize = sizeof(struct xiocb_buffer); xiocb.plist.xiocb_buffer.buf_offset = offset; xiocb.plist.xiocb_buffer.buf_ioctlcmd = ioctlnum; xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer); @@ -380,21 +340,19 @@ cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, *retlen = xiocb.plist.xiocb_buffer.buf_retlen; return xiocb.xiocb_status; } -#endif /* CFE_API_ioctl || CFE_API_ALL */ -#if defined(CFE_API_open) || defined(CFE_API_ALL) int cfe_open(char *name) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_OPEN; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_buffer_t); + xiocb.xiocb_psize = sizeof(struct xiocb_buffer); xiocb.plist.xiocb_buffer.buf_offset = 0; xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(name); - xiocb.plist.xiocb_buffer.buf_length = cfe_strlen(name); + xiocb.plist.xiocb_buffer.buf_length = strlen(name); cfe_iocb_dispatch(&xiocb); @@ -402,27 +360,21 @@ int cfe_open(char *name) return xiocb.xiocb_status; return xiocb.xiocb_handle; } -#endif /* CFE_API_open || CFE_API_ALL */ -#if defined(CFE_API_read) || defined(CFE_API_ALL) int cfe_read(int handle, unsigned char *buffer, int length) { return cfe_readblk(handle, 0, buffer, length); } -#endif /* CFE_API_read || CFE_API_ALL */ -#if defined(CFE_API_readblk) || defined(CFE_API_ALL) -int -cfe_readblk(int handle, cfe_xint_t offset, unsigned char *buffer, - int length) +int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_READ; xiocb.xiocb_status = 0; xiocb.xiocb_handle = handle; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_buffer_t); + xiocb.xiocb_psize = sizeof(struct xiocb_buffer); xiocb.plist.xiocb_buffer.buf_offset = offset; xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer); xiocb.plist.xiocb_buffer.buf_length = length; @@ -433,62 +385,41 @@ cfe_readblk(int handle, cfe_xint_t offset, unsigned char *buffer, return xiocb.xiocb_status; return xiocb.plist.xiocb_buffer.buf_retlen; } -#endif /* CFE_API_readblk || CFE_API_ALL */ -#if defined(CFE_API_setenv) || defined(CFE_API_ALL) int cfe_setenv(char *name, char *val) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_ENV_SET; xiocb.xiocb_status = 0; xiocb.xiocb_handle = 0; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_envbuf_t); + xiocb.xiocb_psize = sizeof(struct xiocb_envbuf); xiocb.plist.xiocb_envbuf.enum_idx = 0; xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name); - xiocb.plist.xiocb_envbuf.name_length = cfe_strlen(name); + xiocb.plist.xiocb_envbuf.name_length = strlen(name); xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(val); - xiocb.plist.xiocb_envbuf.val_length = cfe_strlen(val); + xiocb.plist.xiocb_envbuf.val_length = strlen(val); cfe_iocb_dispatch(&xiocb); return xiocb.xiocb_status; } -#endif /* CFE_API_setenv || CFE_API_ALL */ - -#if (defined(CFE_API_strlen) || defined(CFE_API_ALL)) \ - && !defined(CFE_API_STRLEN_CUSTOM) -int cfe_strlen(char *name) -{ - int count = 0; - - while (*name++) - count++; - return count; -} -#endif /* CFE_API_strlen || CFE_API_ALL */ - -#if defined(CFE_API_write) || defined(CFE_API_ALL) int cfe_write(int handle, unsigned char *buffer, int length) { return cfe_writeblk(handle, 0, buffer, length); } -#endif /* CFE_API_write || CFE_API_ALL */ -#if defined(CFE_API_writeblk) || defined(CFE_API_ALL) -int -cfe_writeblk(int handle, cfe_xint_t offset, unsigned char *buffer, - int length) +int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length) { - cfe_xiocb_t xiocb; + struct cfe_xiocb xiocb; xiocb.xiocb_fcode = CFE_CMD_DEV_WRITE; xiocb.xiocb_status = 0; xiocb.xiocb_handle = handle; xiocb.xiocb_flags = 0; - xiocb.xiocb_psize = sizeof(xiocb_buffer_t); + xiocb.xiocb_psize = sizeof(struct xiocb_buffer); xiocb.plist.xiocb_buffer.buf_offset = offset; xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer); xiocb.plist.xiocb_buffer.buf_length = length; @@ -499,4 +430,3 @@ cfe_writeblk(int handle, cfe_xint_t offset, unsigned char *buffer, return xiocb.xiocb_status; return xiocb.plist.xiocb_buffer.buf_retlen; } -#endif /* CFE_API_writeblk || CFE_API_ALL */ diff --git a/arch/mips/fw/cfe/cfe_api_int.h b/arch/mips/fw/cfe/cfe_api_int.h index f7e5a64b55f..d9759e64695 100644 --- a/arch/mips/fw/cfe/cfe_api_int.h +++ b/arch/mips/fw/cfe/cfe_api_int.h @@ -15,28 +15,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -/* ********************************************************************* - * - * Broadcom Common Firmware Environment (CFE) - * - * Device function prototypes File: cfe_api_int.h - * - * This header defines all internal types and macros for the - * library. This is stuff that's not exported to an app - * using the library. - * - * Authors: Mitch Lichtenberg, Chris Demetriou - * - ********************************************************************* */ - #ifndef CFE_API_INT_H #define CFE_API_INT_H -/* ********************************************************************* - * Constants - ********************************************************************* */ - +/* + * Constants. + */ #define CFE_CMD_FW_GETINFO 0 #define CFE_CMD_FW_RESTART 1 #define CFE_CMD_FW_BOOT 2 @@ -64,89 +48,101 @@ #define CFE_CMD_VENDOR_USE 0x8000 /* codes above this are for customer use */ -/* ********************************************************************* - * Structures - ********************************************************************* */ +/* + * Structures. + */ -typedef uint64_t cfe_xuint_t; -typedef int64_t cfe_xint_t; -typedef int64_t cfe_xptr_t; +/* eeek, signed "pointers" */ +typedef s64 cfe_xptr_t; -typedef struct xiocb_buffer_s { - cfe_xuint_t buf_offset; /* offset on device (bytes) */ +struct xiocb_buffer { + u64 buf_offset; /* offset on device (bytes) */ cfe_xptr_t buf_ptr; /* pointer to a buffer */ - cfe_xuint_t buf_length; /* length of this buffer */ - cfe_xuint_t buf_retlen; /* returned length (for read ops) */ - cfe_xuint_t buf_ioctlcmd; /* IOCTL command (used only for IOCTLs) */ -} xiocb_buffer_t; - -#define buf_devflags buf_ioctlcmd /* returned device info flags */ + u64 buf_length; /* length of this buffer */ + u64 buf_retlen; /* returned length (for read ops) */ + u64 buf_ioctlcmd; /* IOCTL command (used only for IOCTLs) */ +}; -typedef struct xiocb_inpstat_s { - cfe_xuint_t inp_status; /* 1 means input available */ -} xiocb_inpstat_t; +struct xiocb_inpstat { + u64 inp_status; /* 1 means input available */ +}; -typedef struct xiocb_envbuf_s { - cfe_xint_t enum_idx; /* 0-based enumeration index */ +struct xiocb_envbuf { + s64 enum_idx; /* 0-based enumeration index */ cfe_xptr_t name_ptr; /* name string buffer */ - cfe_xint_t name_length; /* size of name buffer */ + s64 name_length; /* size of name buffer */ cfe_xptr_t val_ptr; /* value string buffer */ - cfe_xint_t val_length; /* size of value string buffer */ -} xiocb_envbuf_t; - -typedef struct xiocb_cpuctl_s { - cfe_xuint_t cpu_number; /* cpu number to control */ - cfe_xuint_t cpu_command; /* command to issue to CPU */ - cfe_xuint_t start_addr; /* CPU start address */ - cfe_xuint_t gp_val; /* starting GP value */ - cfe_xuint_t sp_val; /* starting SP value */ - cfe_xuint_t a1_val; /* starting A1 value */ -} xiocb_cpuctl_t; - -typedef struct xiocb_time_s { - cfe_xint_t ticks; /* current time in ticks */ -} xiocb_time_t; - -typedef struct xiocb_exitstat_s { - cfe_xint_t status; -} xiocb_exitstat_t; - -typedef struct xiocb_meminfo_s { - cfe_xint_t mi_idx; /* 0-based enumeration index */ - cfe_xint_t mi_type; /* type of memory block */ - cfe_xuint_t mi_addr; /* physical start address */ - cfe_xuint_t mi_size; /* block size */ -} xiocb_meminfo_t; - -typedef struct xiocb_fwinfo_s { - cfe_xint_t fwi_version; /* major, minor, eco version */ - cfe_xint_t fwi_totalmem; /* total installed mem */ - cfe_xint_t fwi_flags; /* various flags */ - cfe_xint_t fwi_boardid; /* board ID */ - cfe_xint_t fwi_bootarea_va; /* VA of boot area */ - cfe_xint_t fwi_bootarea_pa; /* PA of boot area */ - cfe_xint_t fwi_bootarea_size; /* size of boot area */ - cfe_xint_t fwi_reserved1; - cfe_xint_t fwi_reserved2; - cfe_xint_t fwi_reserved3; -} xiocb_fwinfo_t; - -typedef struct cfe_xiocb_s { - cfe_xuint_t xiocb_fcode; /* IOCB function code */ - cfe_xint_t xiocb_status; /* return status */ - cfe_xint_t xiocb_handle; /* file/device handle */ - cfe_xuint_t xiocb_flags; /* flags for this IOCB */ - cfe_xuint_t xiocb_psize; /* size of parameter list */ + s64 val_length; /* size of value string buffer */ +}; + +struct xiocb_cpuctl { + u64 cpu_number; /* cpu number to control */ + u64 cpu_command; /* command to issue to CPU */ + u64 start_addr; /* CPU start address */ + u64 gp_val; /* starting GP value */ + u64 sp_val; /* starting SP value */ + u64 a1_val; /* starting A1 value */ +}; + +struct xiocb_time { + s64 ticks; /* current time in ticks */ +}; + +struct xiocb_exitstat{ + s64 status; +}; + +struct xiocb_meminfo { + s64 mi_idx; /* 0-based enumeration index */ + s64 mi_type; /* type of memory block */ + u64 mi_addr; /* physical start address */ + u64 mi_size; /* block size */ +}; + +struct xiocb_fwinfo { + s64 fwi_version; /* major, minor, eco version */ + s64 fwi_totalmem; /* total installed mem */ + s64 fwi_flags; /* various flags */ + s64 fwi_boardid; /* board ID */ + s64 fwi_bootarea_va; /* VA of boot area */ + s64 fwi_bootarea_pa; /* PA of boot area */ + s64 fwi_bootarea_size; /* size of boot area */ + s64 fwi_reserved1; + s64 fwi_reserved2; + s64 fwi_reserved3; +}; + +struct cfe_xiocb { + u64 xiocb_fcode; /* IOCB function code */ + s64 xiocb_status; /* return status */ + s64 xiocb_handle; /* file/device handle */ + u64 xiocb_flags; /* flags for this IOCB */ + u64 xiocb_psize; /* size of parameter list */ union { - xiocb_buffer_t xiocb_buffer; /* buffer parameters */ - xiocb_inpstat_t xiocb_inpstat; /* input status parameters */ - xiocb_envbuf_t xiocb_envbuf; /* environment function parameters */ - xiocb_cpuctl_t xiocb_cpuctl; /* CPU control parameters */ - xiocb_time_t xiocb_time; /* timer parameters */ - xiocb_meminfo_t xiocb_meminfo; /* memory arena info parameters */ - xiocb_fwinfo_t xiocb_fwinfo; /* firmware information */ - xiocb_exitstat_t xiocb_exitstat; /* Exit Status */ + /* buffer parameters */ + struct xiocb_buffer xiocb_buffer; + + /* input status parameters */ + struct xiocb_inpstat xiocb_inpstat; + + /* environment function parameters */ + struct xiocb_envbuf xiocb_envbuf; + + /* CPU control parameters */ + struct xiocb_cpuctl xiocb_cpuctl; + + /* timer parameters */ + struct xiocb_time xiocb_time; + + /* memory arena info parameters */ + struct xiocb_meminfo xiocb_meminfo; + + /* firmware information */ + struct xiocb_fwinfo xiocb_fwinfo; + + /* Exit Status */ + struct xiocb_exitstat xiocb_exitstat; } plist; -} cfe_xiocb_t; +}; -#endif /* CFE_API_INT_H */ +#endif /* CFE_API_INT_H */ diff --git a/arch/mips/fw/lib/Makefile b/arch/mips/fw/lib/Makefile new file mode 100644 index 00000000000..84befc968fc --- /dev/null +++ b/arch/mips/fw/lib/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for generic prom monitor library routines under Linux. +# + +lib-$(CONFIG_64BIT) += call_o32.o diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S new file mode 100644 index 00000000000..bdf7d1d4081 --- /dev/null +++ b/arch/mips/fw/lib/call_o32.S @@ -0,0 +1,97 @@ +/* + * arch/mips/dec/prom/call_o32.S + * + * O32 interface for the 64 (or N32) ABI. + * + * Copyright (C) 2002 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> + +/* Maximum number of arguments supported. Must be even! */ +#define O32_ARGC 32 +/* Number of static registers we save. */ +#define O32_STATC 11 +/* Frame size for static register */ +#define O32_FRAMESZ (SZREG * O32_STATC) +/* Frame size on new stack */ +#define O32_FRAMESZ_NEW (SZREG + 4 * O32_ARGC) + + .text + +/* + * O32 function call dispatcher, for interfacing 32-bit ROM routines. + * + * The standard 64 (N32) calling sequence is supported, with a0 + * holding a function pointer, a1 a new stack pointer, a2-a7 -- its + * first six arguments and the stack -- remaining ones (up to O32_ARGC, + * including a2-a7). Static registers, gp and fp are preserved, v0 holds + * a result. This code relies on the called o32 function for sp and ra + * restoration and this dispatcher has to be placed in a KSEGx (or KUSEG) + * address space. Any pointers passed have to point to addresses within + * one of these spaces as well. + */ +NESTED(call_o32, O32_FRAMESZ, ra) + REG_SUBU sp,O32_FRAMESZ + + REG_S ra,O32_FRAMESZ-1*SZREG(sp) + REG_S fp,O32_FRAMESZ-2*SZREG(sp) + REG_S gp,O32_FRAMESZ-3*SZREG(sp) + REG_S s7,O32_FRAMESZ-4*SZREG(sp) + REG_S s6,O32_FRAMESZ-5*SZREG(sp) + REG_S s5,O32_FRAMESZ-6*SZREG(sp) + REG_S s4,O32_FRAMESZ-7*SZREG(sp) + REG_S s3,O32_FRAMESZ-8*SZREG(sp) + REG_S s2,O32_FRAMESZ-9*SZREG(sp) + REG_S s1,O32_FRAMESZ-10*SZREG(sp) + REG_S s0,O32_FRAMESZ-11*SZREG(sp) + + move jp,a0 + REG_SUBU s0,a1,O32_FRAMESZ_NEW + REG_S sp,O32_FRAMESZ_NEW-1*SZREG(s0) + + sll a0,a2,zero + sll a1,a3,zero + sll a2,a4,zero + sll a3,a5,zero + sw a6,0x10(s0) + sw a7,0x14(s0) + + PTR_LA t0,O32_FRAMESZ(sp) + PTR_LA t1,0x18(s0) + li t2,O32_ARGC-6 +1: + lw t3,(t0) + REG_ADDU t0,SZREG + sw t3,(t1) + REG_SUBU t2,1 + REG_ADDU t1,4 + bnez t2,1b + + move sp,s0 + + jalr jp + + REG_L sp,O32_FRAMESZ_NEW-1*SZREG(sp) + + REG_L s0,O32_FRAMESZ-11*SZREG(sp) + REG_L s1,O32_FRAMESZ-10*SZREG(sp) + REG_L s2,O32_FRAMESZ-9*SZREG(sp) + REG_L s3,O32_FRAMESZ-8*SZREG(sp) + REG_L s4,O32_FRAMESZ-7*SZREG(sp) + REG_L s5,O32_FRAMESZ-6*SZREG(sp) + REG_L s6,O32_FRAMESZ-5*SZREG(sp) + REG_L s7,O32_FRAMESZ-4*SZREG(sp) + REG_L gp,O32_FRAMESZ-3*SZREG(sp) + REG_L fp,O32_FRAMESZ-2*SZREG(sp) + REG_L ra,O32_FRAMESZ-1*SZREG(sp) + + REG_ADDU sp,O32_FRAMESZ + jr ra +END(call_o32) diff --git a/arch/mips/fw/sni/Makefile b/arch/mips/fw/sni/Makefile new file mode 100644 index 00000000000..d9740a3788e --- /dev/null +++ b/arch/mips/fw/sni/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the SNI prom monitor routines under Linux. +# + +lib-$(CONFIG_SNIPROM) += sniprom.o diff --git a/arch/mips/fw/sni/sniprom.c b/arch/mips/fw/sni/sniprom.c new file mode 100644 index 00000000000..96ba9920275 --- /dev/null +++ b/arch/mips/fw/sni/sniprom.c @@ -0,0 +1,151 @@ +/* + * Big Endian PROM code for SNI RM machines + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2006 Florian Lohoff (flo@rfc822.org) + * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/console.h> + +#include <asm/addrspace.h> +#include <asm/sni.h> +#include <asm/mipsprom.h> +#include <asm/mipsregs.h> +#include <asm/bootinfo.h> + +/* special SNI prom calls */ +/* + * This does not exist in all proms - SINIX compares + * the prom env variable "version" against "2.0008" + * or greater. If lesser it tries to probe interesting + * registers + */ +#define PROM_GET_MEMCONF 58 +#define PROM_GET_HWCONF 61 + +#define PROM_VEC (u64 *)CKSEG1ADDR(0x1fc00000) +#define PROM_ENTRY(x) (PROM_VEC + (x)) + +#define ___prom_putchar ((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR)) +#define ___prom_getenv ((char *(*)(char *))PROM_ENTRY(PROM_GETENV)) +#define ___prom_get_memconf ((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF)) +#define ___prom_get_hwconf ((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF)) + +#ifdef CONFIG_64BIT + +static u8 o32_stk[16384]; +#define O32_STK &o32_stk[sizeof(o32_stk)] + +#define __PROM_O32(fun, arg) fun arg __asm__(#fun); \ + __asm__(#fun " = call_o32") + +int __PROM_O32(__prom_putchar, (int *(*)(int), void *, int)); +char *__PROM_O32(__prom_getenv, (char *(*)(char *), void *, char *)); +void __PROM_O32(__prom_get_memconf, (void (*)(void *), void *, void *)); +u32 __PROM_O32(__prom_get_hwconf, (u32 (*)(void), void *)); + +#define _prom_putchar(x) __prom_putchar(___prom_putchar, O32_STK, x) +#define _prom_getenv(x) __prom_getenv(___prom_getenv, O32_STK, x) +#define _prom_get_memconf(x) __prom_get_memconf(___prom_get_memconf, O32_STK, x) +#define _prom_get_hwconf() __prom_get_hwconf(___prom_get_hwconf, O32_STK) + +#else +#define _prom_putchar(x) ___prom_putchar(x) +#define _prom_getenv(x) ___prom_getenv(x) +#define _prom_get_memconf(x) ___prom_get_memconf(x) +#define _prom_get_hwconf(x) ___prom_get_hwconf(x) +#endif + +void prom_putchar(char c) +{ + _prom_putchar(c); +} + + +char *prom_getenv(char *s) +{ + return _prom_getenv(s); +} + +void *prom_get_hwconf(void) +{ + u32 hwconf = _prom_get_hwconf(); + + if (hwconf == 0xffffffff) + return NULL; + + return (void *)CKSEG1ADDR(hwconf); +} + +void __init prom_free_prom_memory(void) +{ +} + +/* + * /proc/cpuinfo system type + * + */ +char *system_type = "Unknown"; +const char *get_system_type(void) +{ + return system_type; +} + +static void __init sni_mem_init(void) +{ + int i, memsize; + struct membank { + u32 size; + u32 base; + u32 size2; + u32 pad1; + u32 pad2; + } memconf[8]; + int brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE; + + + /* MemSIZE from prom in 16MByte chunks */ + memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16; + + pr_debug("IDProm memsize: %u MByte\n", memsize); + + /* get memory bank layout from prom */ + _prom_get_memconf(&memconf); + + pr_debug("prom_get_mem_conf memory configuration:\n"); + for (i = 0; i < 8 && memconf[i].size; i++) { + if (brd_type == SNI_BRD_PCI_TOWER || + brd_type == SNI_BRD_PCI_TOWER_CPLUS) { + if (memconf[i].base >= 0x20000000 && + memconf[i].base < 0x30000000) + memconf[i].base -= 0x20000000; + } + pr_debug("Bank%d: %08x @ %08x\n", i, + memconf[i].size, memconf[i].base); + add_memory_region(memconf[i].base, memconf[i].size, + BOOT_MEM_RAM); + } +} + +void __init prom_init(void) +{ + int argc = fw_arg0; + u32 *argv = (u32 *)CKSEG0ADDR(fw_arg1); + int i; + + sni_mem_init(); + + /* copy prom cmdline parameters to kernel cmdline */ + for (i = 1; i < argc; i++) { + strcat(arcs_cmdline, (char *)CKSEG0ADDR(argv[i])); + if (i < (argc - 1)) + strcat(arcs_cmdline, " "); + } +} diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c index 51f6b786246..728ef6a80ed 100644 --- a/arch/mips/gt64120/wrppmc/setup.c +++ b/arch/mips/gt64120/wrppmc/setup.c @@ -121,8 +121,6 @@ const char *get_system_type(void) */ void __init prom_init(void) { - mips_machtype = MACH_WRPPMC; - add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM); add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA); diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index a7857973ca0..a7947199c99 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -200,12 +200,19 @@ static struct platform_device jazz_cmos_pdev = { .resource = jazz_cmos_rsrc }; +static struct platform_device pcspeaker_pdev = { + .name = "pcspkr", + .id = -1, +}; + static int __init jazz_setup_devinit(void) { platform_device_register(&jazz_serial8250_device); platform_device_register(&jazz_esp_pdev); platform_device_register(&jazz_sonic_pdev); platform_device_register(&jazz_cmos_pdev); + platform_device_register(&pcspeaker_pdev); + return 0; } diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c index b643f75ec9a..700b9cf8eb9 100644 --- a/arch/mips/jmr3927/rbhma3100/init.c +++ b/arch/mips/jmr3927/rbhma3100/init.c @@ -52,10 +52,6 @@ void __init prom_init(void) puts("Warning: TX3927 TLB off\n"); #endif -#ifdef CONFIG_TOSHIBA_JMR3927 - mips_machtype = MACH_TOSHIBA_JMR3927; -#endif - prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); } diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 06e01c8f4e3..c886d804d30 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -29,21 +29,17 @@ #include <linux/init.h> #include <linux/kernel.h> -#include <linux/kdev_t.h> #include <linux/types.h> #include <linux/pci.h> -#include <linux/ide.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/clk.h> #ifdef CONFIG_SERIAL_TXX9 -#include <linux/tty.h> -#include <linux/serial.h> #include <linux/serial_core.h> #endif -#include <asm/addrspace.h> #include <asm/txx9tmr.h> #include <asm/reboot.h> #include <asm/jmr3927/jmr3927.h> @@ -238,6 +234,8 @@ static void __init tx3927_setup(void) tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; /* Disable PCI snoop */ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; #ifdef DO_WRITE_THROUGH /* Enable PCI SNOOP - with write through only */ @@ -388,3 +386,55 @@ static int __init jmr3927_rtc_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } device_initcall(jmr3927_rtc_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init jmr3927_wdt_init(void) +{ + return txx9_wdt_init(TX3927_TMR_REG(2)); +} +device_initcall(jmr3927_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "imbus_clk")) + return (struct clk *)JMR3927_IMCLK; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index af78456d413..417bb3e336a 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -18,6 +18,15 @@ #include <asm/mipsregs.h> #include <asm/system.h> +static char bug64hit[] __initdata = + "reliable operation impossible!\n%s"; +static char nowar[] __initdata = + "Please report to <linux-mips@linux-mips.org>."; +static char r4kwar[] __initdata = + "Enable CPU_R4000_WORKAROUNDS to rectify."; +static char daddiwar[] __initdata = + "Enable CPU_DADDI_WORKAROUNDS to rectify."; + static inline void align_mod(const int align, const int mod) { asm volatile( @@ -155,13 +164,7 @@ static inline void check_mult_sh(void) } printk("no.\n"); - panic("Reliable operation impossible!\n" -#ifndef CONFIG_CPU_R4000 - "Configure for R4000 to enable the workaround." -#else - "Please report to <linux-mips@linux-mips.org>." -#endif - ); + panic(bug64hit, !R4000_WAR ? r4kwar : nowar); } static volatile int daddi_ov __initdata = 0; @@ -233,15 +236,11 @@ static inline void check_daddi(void) } printk("no.\n"); - panic("Reliable operation impossible!\n" -#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400) - "Configure for R4000 or R4400 to enable the workaround." -#else - "Please report to <linux-mips@linux-mips.org>." -#endif - ); + panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); } +int daddiu_bug __initdata = -1; + static inline void check_daddiu(void) { long v, w, tmp; @@ -281,7 +280,9 @@ static inline void check_daddiu(void) : "=&r" (v), "=&r" (w), "=&r" (tmp) : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); - if (v == w) { + daddiu_bug = v != w; + + if (!daddiu_bug) { printk("no.\n"); return; } @@ -303,18 +304,16 @@ static inline void check_daddiu(void) } printk("no.\n"); - panic("Reliable operation impossible!\n" -#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400) - "Configure for R4000 or R4400 to enable the workaround." -#else - "Please report to <linux-mips@linux-mips.org>." -#endif - ); + panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); } -void __init check_bugs64(void) +void __init check_bugs64_early(void) { check_mult_sh(); - check_daddi(); check_daddiu(); } + +void __init check_bugs64(void) +{ + check_daddi(); +} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 5c2794391bf..5861a432a52 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -188,6 +188,8 @@ static inline void check_wait(void) case CPU_AU1500: case CPU_AU1550: case CPU_AU1200: + case CPU_AU1210: + case CPU_AU1250: if (allow_au1k_wait) cpu_wait = au1k_wait; break; @@ -733,6 +735,11 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) break; case 4: c->cputype = CPU_AU1200; + if (2 == (c->processor_id & 0xff)) + c->cputype = CPU_AU1250; + break; + case 5: + c->cputype = CPU_AU1210; break; default: panic("Unknown Au Core!"); @@ -858,6 +865,8 @@ static __init const char *cpu_to_name(struct cpuinfo_mips *c) case CPU_AU1100: name = "Au1100"; break; case CPU_AU1550: name = "Au1550"; break; case CPU_AU1200: name = "Au1200"; break; + case CPU_AU1210: name = "Au1210"; break; + case CPU_AU1250: name = "Au1250"; break; case CPU_4KEC: name = "MIPS 4KEc"; break; case CPU_4KSC: name = "MIPS 4KSc"; break; case CPU_VR41XX: name = "NEC Vr41xx"; break; diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index e76a76bf0b3..c6ada98ee04 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -6,7 +6,7 @@ * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 2001 MIPS Technologies, Inc. - * Copyright (C) 2002 Maciej W. Rozycki + * Copyright (C) 2002, 2007 Maciej W. Rozycki */ #include <linux/init.h> @@ -471,7 +471,13 @@ NESTED(nmi_handler, PT_SIZE, sp) jr k0 rfe #else +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS LONG_ADDIU k0, 4 /* stall on $k0 */ +#else + .set at=v1 + LONG_ADDIU k0, 4 + .set noat +#endif MTC0 k0, CP0_EPC /* I hope three instructions between MTC0 and ERET are enough... */ ori k1, _THREAD_MASK diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index d2c2e00e586..f6704ab1630 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -161,8 +161,7 @@ static unsigned int translate_open_flags(int flags) int i; unsigned int ret = 0; - for (i = 0; i < (sizeof(open_flags_table) / sizeof(struct apsp_table)); - i++) { + for (i = 0; i < ARRAY_SIZE(open_flags_table); i++) { if( (flags & open_flags_table[i].sp) ) { ret |= open_flags_table[i].ap; } diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 2b8ec1102e8..65af3cc90ab 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -174,36 +174,16 @@ struct rlimit32 { int rlim_max; }; -#ifdef __MIPSEB__ -asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy, - int length_hi, int length_lo) -#endif -#ifdef __MIPSEL__ -asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy, - int length_lo, int length_hi) -#endif +asmlinkage long sys32_truncate64(const char __user * path, + unsigned long __dummy, int a2, int a3) { - loff_t length; - - length = ((unsigned long) length_hi << 32) | (unsigned int) length_lo; - - return sys_truncate(path, length); + return sys_truncate(path, merge_64(a2, a3)); } -#ifdef __MIPSEB__ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy, - int length_hi, int length_lo) -#endif -#ifdef __MIPSEL__ -asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy, - int length_lo, int length_hi) -#endif + int a2, int a3) { - loff_t length; - - length = ((unsigned long) length_hi << 32) | (unsigned int) length_lo; - - return sys_ftruncate(fd, length); + return sys_ftruncate(fd, merge_64(a2, a3)); } static inline long diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index 3d6b1ec1f32..640fb0cc6e3 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -17,7 +17,6 @@ #include <asm/system.h> #include <asm/hardirq.h> #include <asm/mmu_context.h> -#include <asm/smp.h> #include <asm/mipsmtregs.h> #include <asm/r4kcache.h> #include <asm/cacheflush.h> diff --git a/arch/mips/kernel/pcspeaker.c b/arch/mips/kernel/pcspeaker.c deleted file mode 100644 index 475df690421..00000000000 --- a/arch/mips/kernel/pcspeaker.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2006 IBM Corporation - * - * Implements device information for i8253 timer chip - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation - */ - -#include <linux/platform_device.h> - -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 6e6e947cce1..36f06539824 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -62,6 +62,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) ); seq_printf(m, "shadow register sets\t: %d\n", cpu_data[n].srsets); + seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core); sprintf(fmt, "VCE%%c exceptions\t\t: %s\n", cpu_has_vce ? "%u" : "not available"); @@ -89,7 +90,7 @@ static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 1ba00c15505..0233798f715 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -40,7 +40,6 @@ #include <asm/atomic.h> #include <asm/cpu.h> #include <asm/processor.h> -#include <asm/mips_mt.h> #include <asm/system.h> #include <asm/vpe.h> #include <asm/rtlx.h> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index f8a535afce3..269c252d956 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -8,7 +8,7 @@ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 Ralf Baechle * Copyright (C) 1996 Stoned Elipot * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2000 2001, 2002 Maciej W. Rozycki + * Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki */ #include <linux/init.h> #include <linux/ioport.h> @@ -24,10 +24,12 @@ #include <asm/addrspace.h> #include <asm/bootinfo.h> +#include <asm/bugs.h> #include <asm/cache.h> #include <asm/cpu.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/smp-ops.h> #include <asm/system.h> struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly; @@ -561,6 +563,7 @@ void __init setup_arch(char **cmdline_p) } #endif cpu_report(); + check_bugs_early(); #if defined(CONFIG_VT) #if defined(CONFIG_VGA_CONSOLE) @@ -573,9 +576,7 @@ void __init setup_arch(char **cmdline_p) arch_mem_init(cmdline_p); resource_init(); -#ifdef CONFIG_SMP plat_smp_setup(); -#endif } static int __init fpu_disable(char *s) diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 94e210cc6cb..89e6f6aa516 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -22,6 +22,7 @@ #include <linux/cpumask.h> #include <linux/interrupt.h> #include <linux/compiler.h> +#include <linux/smp.h> #include <asm/atomic.h> #include <asm/cacheflush.h> @@ -30,7 +31,6 @@ #include <asm/system.h> #include <asm/hardirq.h> #include <asm/mmu_context.h> -#include <asm/smp.h> #include <asm/time.h> #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> @@ -215,68 +215,67 @@ static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0) write_tc_c0_tchalt(TCHALT_H); } -/* - * Common setup before any secondaries are started - * Make sure all CPU's are in a sensible state before we boot any of the - * secondarys - */ -void __init plat_smp_setup(void) +static void vsmp_send_ipi_single(int cpu, unsigned int action) { - unsigned int mvpconf0, ntc, tc, ncpu = 0; - -#ifdef CONFIG_MIPS_MT_FPAFF - /* If we have an FPU, enroll ourselves in the FPU-full mask */ - if (cpu_has_fpu) - cpu_set(0, mt_fpu_cpumask); -#endif /* CONFIG_MIPS_MT_FPAFF */ - if (!cpu_has_mipsmt) - return; - - /* disable MT so we can configure */ - dvpe(); - dmt(); + int i; + unsigned long flags; + int vpflags; - /* Put MVPE's into 'configuration state' */ - set_c0_mvpcontrol(MVPCONTROL_VPC); + local_irq_save(flags); - mvpconf0 = read_c0_mvpconf0(); - ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; + vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ - /* we'll always have more TC's than VPE's, so loop setting everything - to a sensible state */ - for (tc = 0; tc <= ntc; tc++) { - settc(tc); + switch (action) { + case SMP_CALL_FUNCTION: + i = C_SW1; + break; - smp_tc_init(tc, mvpconf0); - ncpu = smp_vpe_init(tc, mvpconf0, ncpu); + case SMP_RESCHEDULE_YOURSELF: + default: + i = C_SW0; + break; } - /* Release config state */ - clear_c0_mvpcontrol(MVPCONTROL_VPC); + /* 1:1 mapping of vpe and tc... */ + settc(cpu); + write_vpe_c0_cause(read_vpe_c0_cause() | i); + evpe(vpflags); - /* We'll wait until starting the secondaries before starting MVPE */ + local_irq_restore(flags); +} - printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); +static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + vsmp_send_ipi_single(i, action); } -void __init plat_prepare_cpus(unsigned int max_cpus) +static void __cpuinit vsmp_init_secondary(void) { - mips_mt_set_cpuoptions(); + /* Enable per-cpu interrupts */ - /* set up ipi interrupts */ - if (cpu_has_vint) { - set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - } + /* This is Malta specific: IPI,performance and timer inetrrupts */ + write_c0_status((read_c0_status() & ~ST0_IM ) | + (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7)); +} - cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; - cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; +static void __cpuinit vsmp_smp_finish(void) +{ + write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(smp_processor_id(), mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ - set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); - set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); + local_irq_enable(); +} + +static void vsmp_cpus_done(void) +{ } /* @@ -287,7 +286,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * (unsigned long)idle->thread_info the gp * assumes a 1:1 mapping of TC => VPE */ -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) +static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle) { struct thread_info *gp = task_thread_info(idle); dvpe(); @@ -321,57 +320,81 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) evpe(EVPE_ENABLE); } -void __cpuinit prom_init_secondary(void) -{ - /* Enable per-cpu interrupts */ - - /* This is Malta specific: IPI,performance and timer inetrrupts */ - write_c0_status((read_c0_status() & ~ST0_IM ) | - (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7)); -} - -void __cpuinit prom_smp_finish(void) +/* + * Common setup before any secondaries are started + * Make sure all CPU's are in a sensible state before we boot any of the + * secondarys + */ +static void __init vsmp_smp_setup(void) { - write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); + unsigned int mvpconf0, ntc, tc, ncpu = 0; + unsigned int nvpe; #ifdef CONFIG_MIPS_MT_FPAFF /* If we have an FPU, enroll ourselves in the FPU-full mask */ if (cpu_has_fpu) - cpu_set(smp_processor_id(), mt_fpu_cpumask); + cpu_set(0, mt_fpu_cpumask); #endif /* CONFIG_MIPS_MT_FPAFF */ + if (!cpu_has_mipsmt) + return; - local_irq_enable(); -} + /* disable MT so we can configure */ + dvpe(); + dmt(); -void prom_cpus_done(void) -{ -} + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); -void core_send_ipi(int cpu, unsigned int action) -{ - int i; - unsigned long flags; - int vpflags; + mvpconf0 = read_c0_mvpconf0(); + ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; - local_irq_save(flags); + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + smp_num_siblings = nvpe; - vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ + /* we'll always have more TC's than VPE's, so loop setting everything + to a sensible state */ + for (tc = 0; tc <= ntc; tc++) { + settc(tc); - switch (action) { - case SMP_CALL_FUNCTION: - i = C_SW1; - break; + smp_tc_init(tc, mvpconf0); + ncpu = smp_vpe_init(tc, mvpconf0, ncpu); + } - case SMP_RESCHEDULE_YOURSELF: - default: - i = C_SW0; - break; + /* Release config state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + /* We'll wait until starting the secondaries before starting MVPE */ + + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); +} + +static void __init vsmp_prepare_cpus(unsigned int max_cpus) +{ + mips_mt_set_cpuoptions(); + + /* set up ipi interrupts */ + if (cpu_has_vint) { + set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); } - /* 1:1 mapping of vpe and tc... */ - settc(cpu); - write_vpe_c0_cause(read_vpe_c0_cause() | i); - evpe(vpflags); + cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; - local_irq_restore(flags); + setup_irq(cpu_ipi_resched_irq, &irq_resched); + setup_irq(cpu_ipi_call_irq, &irq_call); + + set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); + set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); } + +struct plat_smp_ops vsmp_smp_ops = { + .send_ipi_single = vsmp_send_ipi_single, + .send_ipi_mask = vsmp_send_ipi_mask, + .init_secondary = vsmp_init_secondary, + .smp_finish = vsmp_smp_finish, + .cpus_done = vsmp_cpus_done, + .boot_secondary = vsmp_boot_secondary, + .smp_setup = vsmp_smp_setup, + .prepare_cpus = vsmp_prepare_cpus, +}; diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 63989e9df4f..1e5dfc28294 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -37,7 +37,6 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/mmu_context.h> -#include <asm/smp.h> #include <asm/time.h> #ifdef CONFIG_MIPS_MT_SMTC @@ -56,6 +55,44 @@ EXPORT_SYMBOL(cpu_online_map); extern void __init calibrate_delay(void); extern void cpu_idle(void); +/* Number of TCs (or siblings in Intel speak) per CPU core */ +int smp_num_siblings = 1; +EXPORT_SYMBOL(smp_num_siblings); + +/* representing the TCs (or siblings in Intel speak) of each logical CPU */ +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_sibling_map); + +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + +static inline void set_cpu_sibling_map(int cpu) +{ + int i; + + cpu_set(cpu, cpu_sibling_setup_map); + + if (smp_num_siblings > 1) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_data[cpu].core == cpu_data[i].core) { + cpu_set(i, cpu_sibling_map[cpu]); + cpu_set(cpu, cpu_sibling_map[i]); + } + } + } else + cpu_set(cpu, cpu_sibling_map[cpu]); +} + +struct plat_smp_ops *mp_ops; + +__cpuinit void register_smp_ops(struct plat_smp_ops *ops) +{ + if (ops) + printk(KERN_WARNING "Overriding previous set SMP ops\n"); + + mp_ops = ops; +} + /* * First C code run on the secondary CPUs after being started up by * the master. @@ -72,7 +109,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_report(); per_cpu_trap_init(); mips_clockevent_init(); - prom_init_secondary(); + mp_ops->init_secondary(); /* * XXX parity protection should be folded in here when it's converted @@ -84,7 +121,8 @@ asmlinkage __cpuinit void start_secondary(void) cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; - prom_smp_finish(); + mp_ops->smp_finish(); + set_cpu_sibling_map(cpu); cpu_set(cpu, cpu_callin_map); @@ -155,7 +193,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func) (void *info), smp_mb(); /* Send a message to all other CPUs and wait for them to respond */ - core_send_ipi_mask(mask, SMP_CALL_FUNCTION); + mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); /* Wait for response */ /* FIXME: lock-up detection, backtrace on lock-up */ @@ -249,7 +287,7 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { - prom_cpus_done(); + mp_ops->cpus_done(); } /* called from main before smp_init() */ @@ -257,7 +295,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { init_new_context(current, &init_mm); current_thread_info()->cpu = 0; - plat_prepare_cpus(max_cpus); + mp_ops->prepare_cpus(max_cpus); + set_cpu_sibling_map(0); #ifndef CONFIG_HOTPLUG_CPU cpu_present_map = cpu_possible_map; #endif @@ -295,7 +334,7 @@ int __cpuinit __cpu_up(unsigned int cpu) if (IS_ERR(idle)) panic(KERN_ERR "Fork failed for CPU %d", cpu); - prom_boot_secondary(cpu, idle); + mp_ops->boot_secondary(cpu, idle); /* * Trust is futile. We should really have timeouts ... diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c index 6f370999617..fe256559c99 100644 --- a/arch/mips/kernel/smtc-proc.c +++ b/arch/mips/kernel/smtc-proc.c @@ -14,7 +14,6 @@ #include <asm/system.h> #include <asm/hardirq.h> #include <asm/mmu_context.h> -#include <asm/smp.h> #include <asm/mipsregs.h> #include <asm/cacheflush.h> #include <linux/proc_fs.h> diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 9c92d42996c..85f700e5813 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -16,7 +16,6 @@ #include <asm/hazards.h> #include <asm/irq.h> #include <asm/mmu_context.h> -#include <asm/smp.h> #include <asm/mipsregs.h> #include <asm/cacheflush.h> #include <asm/time.h> diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 2995be1ab3c..9f85d4cecc5 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -50,8 +50,6 @@ int update_persistent_clock(struct timespec now) return rtc_mips_set_mmss(now.tv_sec); } -int (*mips_timer_state)(void); - int null_perf_irq(void) { return 0; diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index c06eb812a95..eed2dc4273e 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -53,7 +53,6 @@ #include <asm/system.h> #include <asm/vpe.h> #include <asm/kspd.h> -#include <asm/mips_mt.h> typedef void *vpe_handle; diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c index 6471d0663fd..d3d04c392e2 100644 --- a/arch/mips/lasat/picvue.c +++ b/arch/mips/lasat/picvue.c @@ -22,8 +22,6 @@ struct pvc_defs *picvue; -DECLARE_MUTEX(pvc_sem); - static void pvc_reg_write(u32 val) { *picvue->reg = val; diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h index 2a96bf97189..91df5537112 100644 --- a/arch/mips/lasat/picvue.h +++ b/arch/mips/lasat/picvue.h @@ -4,8 +4,6 @@ * Brian Murphy <brian.murphy@eicon.com> * */ -#include <asm/semaphore.h> - struct pvc_defs { volatile u32 *reg; u32 data_shift; @@ -45,4 +43,3 @@ void pvc_move(u8 cmd); void pvc_clear(void); void pvc_home(void); -extern struct semaphore pvc_sem; diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c index 9947c152582..0bb6037afba 100644 --- a/arch/mips/lasat/picvue_proc.c +++ b/arch/mips/lasat/picvue_proc.c @@ -13,9 +13,11 @@ #include <linux/interrupt.h> #include <linux/timer.h> +#include <linux/mutex.h> #include "picvue.h" +static DEFINE_MUTEX(pvc_mutex); static char pvc_lines[PVC_NLINES][PVC_LINELEN+1]; static int pvc_linedata[PVC_NLINES]; static struct proc_dir_entry *pvc_display_dir; @@ -48,9 +50,9 @@ static int pvc_proc_read_line(char *page, char **start, return 0; } - down(&pvc_sem); + mutex_lock(&pvc_mutex); page += sprintf(page, "%s\n", pvc_lines[lineno]); - up(&pvc_sem); + mutex_unlock(&pvc_mutex); return page - origpage; } @@ -73,10 +75,10 @@ static int pvc_proc_write_line(struct file *file, const char *buffer, if (buffer[count-1] == '\n') count--; - down(&pvc_sem); + mutex_lock(&pvc_mutex); strncpy(pvc_lines[lineno], buffer, count); pvc_lines[lineno][count] = '\0'; - up(&pvc_sem); + mutex_unlock(&pvc_mutex); tasklet_schedule(&pvc_display_tasklet); @@ -89,7 +91,7 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer, int origcount = count; int cmd = simple_strtol(buffer, NULL, 10); - down(&pvc_sem); + mutex_lock(&pvc_mutex); if (scroll_interval != 0) del_timer(&timer); @@ -106,7 +108,7 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer, } add_timer(&timer); } - up(&pvc_sem); + mutex_unlock(&pvc_mutex); return origcount; } @@ -117,9 +119,9 @@ static int pvc_proc_read_scroll(char *page, char **start, { char *origpage = page; - down(&pvc_sem); + mutex_lock(&pvc_mutex); page += sprintf(page, "%d\n", scroll_dir * scroll_interval); - up(&pvc_sem); + mutex_unlock(&pvc_mutex); return page - origpage; } diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c index 1ade1cef389..c1e41f15cc7 100644 --- a/arch/mips/lemote/lm2e/pci.c +++ b/arch/mips/lemote/lm2e/pci.c @@ -81,9 +81,6 @@ static void __init ict_pcimap(void) static int __init pcibios_init(void) { - extern int pci_probe_only; - pci_probe_only = 0; - ict_pcimap(); register_pci_controller(&loongson2e_pci_controller); diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c index 82433681219..7edc15dfed6 100644 --- a/arch/mips/lemote/lm2e/prom.c +++ b/arch/mips/lemote/lm2e/prom.c @@ -57,8 +57,6 @@ void __init prom_init(void) arg = (int *)fw_arg1; env = (int *)fw_arg2; - mips_machtype = MACH_LEMOTE_FULONG; - prom_init_cmdline(); if ((strstr(arcs_cmdline, "console=")) == NULL) diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index c0a77fe038b..8d7784122c1 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -7,6 +7,7 @@ * * Copyright (C) 1998, 1999 Ralf Baechle * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki */ #include <linux/errno.h> #include <asm/asm.h> @@ -52,9 +53,12 @@ #define UNIT(unit) ((unit)*NBYTES) #define ADDC(sum,reg) \ + .set push; \ + .set noat; \ ADD sum, reg; \ sltu v1, sum, reg; \ - ADD sum, v1 + ADD sum, v1; \ + .set pop #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ @@ -92,13 +96,13 @@ LEAF(csum_partial) move t7, zero sltiu t8, a1, 0x8 - bnez t8, small_csumcpy /* < 8 bytes to copy */ + bnez t8, .Lsmall_csumcpy /* < 8 bytes to copy */ move t2, a1 andi t7, src, 0x1 /* odd buffer? */ -hword_align: - beqz t7, word_align +.Lhword_align: + beqz t7, .Lword_align andi t8, src, 0x2 lbu t0, (src) @@ -110,8 +114,8 @@ hword_align: PTR_ADDU src, src, 0x1 andi t8, src, 0x2 -word_align: - beqz t8, dword_align +.Lword_align: + beqz t8, .Ldword_align sltiu t8, a1, 56 lhu t0, (src) @@ -120,12 +124,12 @@ word_align: sltiu t8, a1, 56 PTR_ADDU src, src, 0x2 -dword_align: - bnez t8, do_end_words +.Ldword_align: + bnez t8, .Ldo_end_words move t8, a1 andi t8, src, 0x4 - beqz t8, qword_align + beqz t8, .Lqword_align andi t8, src, 0x8 lw t0, 0x00(src) @@ -134,8 +138,8 @@ dword_align: PTR_ADDU src, src, 0x4 andi t8, src, 0x8 -qword_align: - beqz t8, oword_align +.Lqword_align: + beqz t8, .Loword_align andi t8, src, 0x10 #ifdef USE_DOUBLE @@ -152,8 +156,8 @@ qword_align: PTR_ADDU src, src, 0x8 andi t8, src, 0x10 -oword_align: - beqz t8, begin_movement +.Loword_align: + beqz t8, .Lbegin_movement LONG_SRL t8, a1, 0x7 #ifdef USE_DOUBLE @@ -168,51 +172,55 @@ oword_align: PTR_ADDU src, src, 0x10 LONG_SRL t8, a1, 0x7 -begin_movement: +.Lbegin_movement: beqz t8, 1f andi t2, a1, 0x40 -move_128bytes: +.Lmove_128bytes: CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4) CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4) CSUM_BIGCHUNK(src, 0x40, sum, t0, t1, t3, t4) CSUM_BIGCHUNK(src, 0x60, sum, t0, t1, t3, t4) LONG_SUBU t8, t8, 0x01 - bnez t8, move_128bytes - PTR_ADDU src, src, 0x80 + .set reorder /* DADDI_WAR */ + PTR_ADDU src, src, 0x80 + bnez t8, .Lmove_128bytes + .set noreorder 1: beqz t2, 1f andi t2, a1, 0x20 -move_64bytes: +.Lmove_64bytes: CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4) CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4) PTR_ADDU src, src, 0x40 1: - beqz t2, do_end_words + beqz t2, .Ldo_end_words andi t8, a1, 0x1c -move_32bytes: +.Lmove_32bytes: CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4) andi t8, a1, 0x1c PTR_ADDU src, src, 0x20 -do_end_words: - beqz t8, small_csumcpy +.Ldo_end_words: + beqz t8, .Lsmall_csumcpy andi t2, a1, 0x3 LONG_SRL t8, t8, 0x2 -end_words: +.Lend_words: lw t0, (src) LONG_SUBU t8, t8, 0x1 ADDC(sum, t0) - bnez t8, end_words - PTR_ADDU src, src, 0x4 + .set reorder /* DADDI_WAR */ + PTR_ADDU src, src, 0x4 + bnez t8, .Lend_words + .set noreorder /* unknown src alignment and < 8 bytes to go */ -small_csumcpy: +.Lsmall_csumcpy: move a1, t2 andi t0, a1, 4 @@ -246,6 +254,8 @@ small_csumcpy: 1: ADDC(sum, t1) /* fold checksum */ + .set push + .set noat #ifdef USE_DOUBLE dsll32 v1, sum, 0 daddu sum, v1 @@ -266,6 +276,7 @@ small_csumcpy: srl sum, sum, 8 or sum, v1 andi sum, 0xffff + .set pop 1: .set reorder /* Add the passed partial csum. */ @@ -373,7 +384,11 @@ small_csumcpy: #define ADDRMASK (NBYTES-1) +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS .set noat +#else + .set at=v1 +#endif LEAF(__csum_partial_copy_user) PTR_ADDU AT, src, len /* See (1) above. */ @@ -398,95 +413,101 @@ FEXPORT(csum_partial_copy_nocheck) */ sltu t2, len, NBYTES and t1, dst, ADDRMASK - bnez t2, copy_bytes_checklen + bnez t2, .Lcopy_bytes_checklen and t0, src, ADDRMASK andi odd, dst, 0x1 /* odd buffer? */ - bnez t1, dst_unaligned + bnez t1, .Ldst_unaligned nop - bnez t0, src_unaligned_dst_aligned + bnez t0, .Lsrc_unaligned_dst_aligned /* * use delay slot for fall-through * src and dst are aligned; need to compute rem */ -both_aligned: +.Lboth_aligned: SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter - beqz t0, cleanup_both_aligned # len < 8*NBYTES + beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES nop SUB len, 8*NBYTES # subtract here for bgez loop .align 4 1: -EXC( LOAD t0, UNIT(0)(src), l_exc) -EXC( LOAD t1, UNIT(1)(src), l_exc_copy) -EXC( LOAD t2, UNIT(2)(src), l_exc_copy) -EXC( LOAD t3, UNIT(3)(src), l_exc_copy) -EXC( LOAD t4, UNIT(4)(src), l_exc_copy) -EXC( LOAD t5, UNIT(5)(src), l_exc_copy) -EXC( LOAD t6, UNIT(6)(src), l_exc_copy) -EXC( LOAD t7, UNIT(7)(src), l_exc_copy) +EXC( LOAD t0, UNIT(0)(src), .Ll_exc) +EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) +EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) +EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) +EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy) +EXC( LOAD t5, UNIT(5)(src), .Ll_exc_copy) +EXC( LOAD t6, UNIT(6)(src), .Ll_exc_copy) +EXC( LOAD t7, UNIT(7)(src), .Ll_exc_copy) SUB len, len, 8*NBYTES ADD src, src, 8*NBYTES -EXC( STORE t0, UNIT(0)(dst), s_exc) +EXC( STORE t0, UNIT(0)(dst), .Ls_exc) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), s_exc) +EXC( STORE t1, UNIT(1)(dst), .Ls_exc) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), s_exc) +EXC( STORE t2, UNIT(2)(dst), .Ls_exc) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), s_exc) +EXC( STORE t3, UNIT(3)(dst), .Ls_exc) ADDC(sum, t3) -EXC( STORE t4, UNIT(4)(dst), s_exc) +EXC( STORE t4, UNIT(4)(dst), .Ls_exc) ADDC(sum, t4) -EXC( STORE t5, UNIT(5)(dst), s_exc) +EXC( STORE t5, UNIT(5)(dst), .Ls_exc) ADDC(sum, t5) -EXC( STORE t6, UNIT(6)(dst), s_exc) +EXC( STORE t6, UNIT(6)(dst), .Ls_exc) ADDC(sum, t6) -EXC( STORE t7, UNIT(7)(dst), s_exc) +EXC( STORE t7, UNIT(7)(dst), .Ls_exc) ADDC(sum, t7) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 8*NBYTES bgez len, 1b - ADD dst, dst, 8*NBYTES + .set noreorder ADD len, 8*NBYTES # revert len (see above) /* * len == the number of bytes left to copy < 8*NBYTES */ -cleanup_both_aligned: +.Lcleanup_both_aligned: #define rem t7 - beqz len, done + beqz len, .Ldone sltu t0, len, 4*NBYTES - bnez t0, less_than_4units + bnez t0, .Lless_than_4units and rem, len, (NBYTES-1) # rem = len % NBYTES /* * len >= 4*NBYTES */ -EXC( LOAD t0, UNIT(0)(src), l_exc) -EXC( LOAD t1, UNIT(1)(src), l_exc_copy) -EXC( LOAD t2, UNIT(2)(src), l_exc_copy) -EXC( LOAD t3, UNIT(3)(src), l_exc_copy) +EXC( LOAD t0, UNIT(0)(src), .Ll_exc) +EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) +EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) +EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES ADD src, src, 4*NBYTES -EXC( STORE t0, UNIT(0)(dst), s_exc) +EXC( STORE t0, UNIT(0)(dst), .Ls_exc) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), s_exc) +EXC( STORE t1, UNIT(1)(dst), .Ls_exc) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), s_exc) +EXC( STORE t2, UNIT(2)(dst), .Ls_exc) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), s_exc) +EXC( STORE t3, UNIT(3)(dst), .Ls_exc) ADDC(sum, t3) - beqz len, done - ADD dst, dst, 4*NBYTES -less_than_4units: + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES + beqz len, .Ldone + .set noreorder +.Lless_than_4units: /* * rem = len % NBYTES */ - beq rem, len, copy_bytes + beq rem, len, .Lcopy_bytes nop 1: -EXC( LOAD t0, 0(src), l_exc) +EXC( LOAD t0, 0(src), .Ll_exc) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), s_exc) +EXC( STORE t0, 0(dst), .Ls_exc) ADDC(sum, t0) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES bne rem, len, 1b - ADD dst, dst, NBYTES + .set noreorder /* * src and dst are aligned, need to copy rem bytes (rem < NBYTES) @@ -500,20 +521,20 @@ EXC( STORE t0, 0(dst), s_exc) * more instruction-level parallelism. */ #define bits t2 - beqz len, done + beqz len, .Ldone ADD t1, dst, len # t1 is just past last byte of dst li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep -EXC( LOAD t0, 0(src), l_exc) +EXC( LOAD t0, 0(src), .Ll_exc) SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits -EXC( STREST t0, -1(t1), s_exc) +EXC( STREST t0, -1(t1), .Ls_exc) SHIFT_DISCARD_REVERT t0, t0, bits .set reorder ADDC(sum, t0) - b done + b .Ldone .set noreorder -dst_unaligned: +.Ldst_unaligned: /* * dst is unaligned * t0 = src & ADDRMASK @@ -524,25 +545,25 @@ dst_unaligned: * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), l_exc) +EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) ADD t2, zero, NBYTES -EXC( LDREST t3, REST(0)(src), l_exc_copy) +EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) SUB t2, t2, t1 # t2 = number of bytes copied xor match, t0, t1 -EXC( STFIRST t3, FIRST(0)(dst), s_exc) +EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) SLL t4, t1, 3 # t4 = number of bits to discard SHIFT_DISCARD t3, t3, t4 /* no SHIFT_DISCARD_REVERT to handle odd buffer properly */ ADDC(sum, t3) - beq len, t2, done + beq len, t2, .Ldone SUB len, len, t2 ADD dst, dst, t2 - beqz match, both_aligned + beqz match, .Lboth_aligned ADD src, src, t2 -src_unaligned_dst_aligned: +.Lsrc_unaligned_dst_aligned: SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter - beqz t0, cleanup_src_unaligned + beqz t0, .Lcleanup_src_unaligned and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES 1: /* @@ -551,49 +572,53 @@ src_unaligned_dst_aligned: * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES -EXC( LDREST t0, REST(0)(src), l_exc_copy) -EXC( LDREST t1, REST(1)(src), l_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) -EXC( LDREST t2, REST(2)(src), l_exc_copy) -EXC( LDREST t3, REST(3)(src), l_exc_copy) +EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) +EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) +EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) +EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) ADD src, src, 4*NBYTES #ifdef CONFIG_CPU_SB1 nop # improves slotting #endif -EXC( STORE t0, UNIT(0)(dst), s_exc) +EXC( STORE t0, UNIT(0)(dst), .Ls_exc) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), s_exc) +EXC( STORE t1, UNIT(1)(dst), .Ls_exc) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), s_exc) +EXC( STORE t2, UNIT(2)(dst), .Ls_exc) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), s_exc) +EXC( STORE t3, UNIT(3)(dst), .Ls_exc) ADDC(sum, t3) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES bne len, rem, 1b - ADD dst, dst, 4*NBYTES + .set noreorder -cleanup_src_unaligned: - beqz len, done +.Lcleanup_src_unaligned: + beqz len, .Ldone and rem, len, NBYTES-1 # rem = len % NBYTES - beq rem, len, copy_bytes + beq rem, len, .Lcopy_bytes nop 1: -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDREST t0, REST(0)(src), l_exc_copy) +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), s_exc) +EXC( STORE t0, 0(dst), .Ls_exc) ADDC(sum, t0) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES bne len, rem, 1b - ADD dst, dst, NBYTES + .set noreorder -copy_bytes_checklen: - beqz len, done +.Lcopy_bytes_checklen: + beqz len, .Ldone nop -copy_bytes: +.Lcopy_bytes: /* 0 < len < NBYTES */ #ifdef CONFIG_CPU_LITTLE_ENDIAN #define SHIFT_START 0 @@ -604,14 +629,14 @@ copy_bytes: #endif move t2, zero # partial word li t3, SHIFT_START # shift -/* use l_exc_copy here to return correct sum on fault */ +/* use .Ll_exc_copy here to return correct sum on fault */ #define COPY_BYTE(N) \ -EXC( lbu t0, N(src), l_exc_copy); \ +EXC( lbu t0, N(src), .Ll_exc_copy); \ SUB len, len, 1; \ -EXC( sb t0, N(dst), s_exc); \ +EXC( sb t0, N(dst), .Ls_exc); \ SLLV t0, t0, t3; \ addu t3, SHIFT_INC; \ - beqz len, copy_bytes_done; \ + beqz len, .Lcopy_bytes_done; \ or t2, t0 COPY_BYTE(0) @@ -622,15 +647,17 @@ EXC( sb t0, N(dst), s_exc); \ COPY_BYTE(4) COPY_BYTE(5) #endif -EXC( lbu t0, NBYTES-2(src), l_exc_copy) +EXC( lbu t0, NBYTES-2(src), .Ll_exc_copy) SUB len, len, 1 -EXC( sb t0, NBYTES-2(dst), s_exc) +EXC( sb t0, NBYTES-2(dst), .Ls_exc) SLLV t0, t0, t3 or t2, t0 -copy_bytes_done: +.Lcopy_bytes_done: ADDC(sum, t2) -done: +.Ldone: /* fold checksum */ + .set push + .set noat #ifdef USE_DOUBLE dsll32 v1, sum, 0 daddu sum, v1 @@ -651,13 +678,14 @@ done: srl sum, sum, 8 or sum, v1 andi sum, 0xffff + .set pop 1: .set reorder ADDC(sum, psum) jr ra .set noreorder -l_exc_copy: +.Ll_exc_copy: /* * Copy bytes from src until faulting load address (or until a * lb faults) @@ -672,15 +700,17 @@ l_exc_copy: li t2, SHIFT_START LOAD t0, THREAD_BUADDR(t0) 1: -EXC( lbu t1, 0(src), l_exc) +EXC( lbu t1, 0(src), .Ll_exc) ADD src, src, 1 sb t1, 0(dst) # can't fault -- we're copy_from_user SLLV t1, t1, t2 addu t2, SHIFT_INC ADDC(sum, t1) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 1 bne src, t0, 1b - ADD dst, dst, 1 -l_exc: + .set noreorder +.Ll_exc: LOAD t0, TI_TASK($28) nop LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address @@ -697,19 +727,30 @@ l_exc: * Clear len bytes starting at dst. Can't call __bzero because it * might modify len. An inefficient loop for these rare times... */ - beqz len, done - SUB src, len, 1 + .set reorder /* DADDI_WAR */ + SUB src, len, 1 + beqz len, .Ldone + .set noreorder 1: sb zero, 0(dst) ADD dst, dst, 1 + .set push + .set noat +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS bnez src, 1b SUB src, src, 1 +#else + li v1, 1 + bnez src, 1b + SUB src, src, v1 +#endif li v1, -EFAULT - b done + b .Ldone sw v1, (errptr) -s_exc: +.Ls_exc: li v0, -1 /* invalid checksum */ li v1, -EFAULT jr ra sw v1, (errptr) + .set pop END(__csum_partial_copy_user) diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S index 3a534b2baa0..736d0fb56a9 100644 --- a/arch/mips/lib/memcpy-inatomic.S +++ b/arch/mips/lib/memcpy-inatomic.S @@ -9,6 +9,7 @@ * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc. * Copyright (C) 2002 Broadcom, Inc. * memcpy/copy_user author: Mark Vandevoorde + * Copyright (C) 2007 Maciej W. Rozycki * * Mnemonic names for arguments to memcpy/__copy_user */ @@ -175,7 +176,11 @@ .text .set noreorder +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS .set noat +#else + .set at=v1 +#endif /* * A combined memcpy/__copy_user @@ -204,36 +209,36 @@ LEAF(__copy_user_inatomic) and t1, dst, ADDRMASK PREF( 0, 1*32(src) ) PREF( 1, 1*32(dst) ) - bnez t2, copy_bytes_checklen + bnez t2, .Lcopy_bytes_checklen and t0, src, ADDRMASK PREF( 0, 2*32(src) ) PREF( 1, 2*32(dst) ) - bnez t1, dst_unaligned + bnez t1, .Ldst_unaligned nop - bnez t0, src_unaligned_dst_aligned + bnez t0, .Lsrc_unaligned_dst_aligned /* * use delay slot for fall-through * src and dst are aligned; need to compute rem */ -both_aligned: - SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter - beqz t0, cleanup_both_aligned # len < 8*NBYTES - and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) +.Lboth_aligned: + SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter + beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES + and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) PREF( 0, 3*32(src) ) PREF( 1, 3*32(dst) ) .align 4 1: -EXC( LOAD t0, UNIT(0)(src), l_exc) -EXC( LOAD t1, UNIT(1)(src), l_exc_copy) -EXC( LOAD t2, UNIT(2)(src), l_exc_copy) -EXC( LOAD t3, UNIT(3)(src), l_exc_copy) +EXC( LOAD t0, UNIT(0)(src), .Ll_exc) +EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) +EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) +EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) SUB len, len, 8*NBYTES -EXC( LOAD t4, UNIT(4)(src), l_exc_copy) -EXC( LOAD t7, UNIT(5)(src), l_exc_copy) +EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy) +EXC( LOAD t7, UNIT(5)(src), .Ll_exc_copy) STORE t0, UNIT(0)(dst) STORE t1, UNIT(1)(dst) -EXC( LOAD t0, UNIT(6)(src), l_exc_copy) -EXC( LOAD t1, UNIT(7)(src), l_exc_copy) +EXC( LOAD t0, UNIT(6)(src), .Ll_exc_copy) +EXC( LOAD t1, UNIT(7)(src), .Ll_exc_copy) ADD src, src, 8*NBYTES ADD dst, dst, 8*NBYTES STORE t2, UNIT(-6)(dst) @@ -250,39 +255,43 @@ EXC( LOAD t1, UNIT(7)(src), l_exc_copy) /* * len == rem == the number of bytes left to copy < 8*NBYTES */ -cleanup_both_aligned: - beqz len, done +.Lcleanup_both_aligned: + beqz len, .Ldone sltu t0, len, 4*NBYTES - bnez t0, less_than_4units + bnez t0, .Lless_than_4units and rem, len, (NBYTES-1) # rem = len % NBYTES /* * len >= 4*NBYTES */ -EXC( LOAD t0, UNIT(0)(src), l_exc) -EXC( LOAD t1, UNIT(1)(src), l_exc_copy) -EXC( LOAD t2, UNIT(2)(src), l_exc_copy) -EXC( LOAD t3, UNIT(3)(src), l_exc_copy) +EXC( LOAD t0, UNIT(0)(src), .Ll_exc) +EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) +EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) +EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES ADD src, src, 4*NBYTES STORE t0, UNIT(0)(dst) STORE t1, UNIT(1)(dst) STORE t2, UNIT(2)(dst) STORE t3, UNIT(3)(dst) - beqz len, done - ADD dst, dst, 4*NBYTES -less_than_4units: + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES + beqz len, .Ldone + .set noreorder +.Lless_than_4units: /* * rem = len % NBYTES */ - beq rem, len, copy_bytes + beq rem, len, .Lcopy_bytes nop 1: -EXC( LOAD t0, 0(src), l_exc) +EXC( LOAD t0, 0(src), .Ll_exc) ADD src, src, NBYTES SUB len, len, NBYTES STORE t0, 0(dst) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES bne rem, len, 1b - ADD dst, dst, NBYTES + .set noreorder /* * src and dst are aligned, need to copy rem bytes (rem < NBYTES) @@ -296,17 +305,17 @@ EXC( LOAD t0, 0(src), l_exc) * more instruction-level parallelism. */ #define bits t2 - beqz len, done + beqz len, .Ldone ADD t1, dst, len # t1 is just past last byte of dst li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep -EXC( LOAD t0, 0(src), l_exc) +EXC( LOAD t0, 0(src), .Ll_exc) SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits STREST t0, -1(t1) jr ra move len, zero -dst_unaligned: +.Ldst_unaligned: /* * dst is unaligned * t0 = src & ADDRMASK @@ -317,22 +326,22 @@ dst_unaligned: * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), l_exc) +EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) ADD t2, zero, NBYTES -EXC( LDREST t3, REST(0)(src), l_exc_copy) +EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) SUB t2, t2, t1 # t2 = number of bytes copied xor match, t0, t1 STFIRST t3, FIRST(0)(dst) - beq len, t2, done + beq len, t2, .Ldone SUB len, len, t2 ADD dst, dst, t2 - beqz match, both_aligned + beqz match, .Lboth_aligned ADD src, src, t2 -src_unaligned_dst_aligned: +.Lsrc_unaligned_dst_aligned: SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter PREF( 0, 3*32(src) ) - beqz t0, cleanup_src_unaligned + beqz t0, .Lcleanup_src_unaligned and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES PREF( 1, 3*32(dst) ) 1: @@ -342,15 +351,15 @@ src_unaligned_dst_aligned: * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES -EXC( LDREST t0, REST(0)(src), l_exc_copy) -EXC( LDREST t1, REST(1)(src), l_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) -EXC( LDREST t2, REST(2)(src), l_exc_copy) -EXC( LDREST t3, REST(3)(src), l_exc_copy) +EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) +EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) +EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) +EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) ADD src, src, 4*NBYTES #ifdef CONFIG_CPU_SB1 @@ -361,32 +370,36 @@ EXC( LDREST t3, REST(3)(src), l_exc_copy) STORE t2, UNIT(2)(dst) STORE t3, UNIT(3)(dst) PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES bne len, rem, 1b - ADD dst, dst, 4*NBYTES + .set noreorder -cleanup_src_unaligned: - beqz len, done +.Lcleanup_src_unaligned: + beqz len, .Ldone and rem, len, NBYTES-1 # rem = len % NBYTES - beq rem, len, copy_bytes + beq rem, len, .Lcopy_bytes nop 1: -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDREST t0, REST(0)(src), l_exc_copy) +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) ADD src, src, NBYTES SUB len, len, NBYTES STORE t0, 0(dst) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES bne len, rem, 1b - ADD dst, dst, NBYTES + .set noreorder -copy_bytes_checklen: - beqz len, done +.Lcopy_bytes_checklen: + beqz len, .Ldone nop -copy_bytes: +.Lcopy_bytes: /* 0 < len < NBYTES */ #define COPY_BYTE(N) \ -EXC( lb t0, N(src), l_exc); \ +EXC( lb t0, N(src), .Ll_exc); \ SUB len, len, 1; \ - beqz len, done; \ + beqz len, .Ldone; \ sb t0, N(dst) COPY_BYTE(0) @@ -397,16 +410,16 @@ EXC( lb t0, N(src), l_exc); \ COPY_BYTE(4) COPY_BYTE(5) #endif -EXC( lb t0, NBYTES-2(src), l_exc) +EXC( lb t0, NBYTES-2(src), .Ll_exc) SUB len, len, 1 jr ra sb t0, NBYTES-2(dst) -done: +.Ldone: jr ra nop END(__copy_user_inatomic) -l_exc_copy: +.Ll_exc_copy: /* * Copy bytes from src until faulting load address (or until a * lb faults) @@ -421,12 +434,14 @@ l_exc_copy: nop LOAD t0, THREAD_BUADDR(t0) 1: -EXC( lb t1, 0(src), l_exc) +EXC( lb t1, 0(src), .Ll_exc) ADD src, src, 1 sb t1, 0(dst) # can't fault -- we're copy_from_user + .set reorder /* DADDI_WAR */ + ADD dst, dst, 1 bne src, t0, 1b - ADD dst, dst, 1 -l_exc: + .set noreorder +.Ll_exc: LOAD t0, TI_TASK($28) nop LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index a526c62cb76..c06cccf60be 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -9,6 +9,7 @@ * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc. * Copyright (C) 2002 Broadcom, Inc. * memcpy/copy_user author: Mark Vandevoorde + * Copyright (C) 2007 Maciej W. Rozycki * * Mnemonic names for arguments to memcpy/__copy_user */ @@ -175,7 +176,11 @@ .text .set noreorder +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS .set noat +#else + .set at=v1 +#endif /* * A combined memcpy/__copy_user @@ -186,7 +191,7 @@ .align 5 LEAF(memcpy) /* a0=dst a1=src a2=len */ move v0, dst /* return value */ -__memcpy: +.L__memcpy: FEXPORT(__copy_user) /* * Note: dst & src may be unaligned, len may be 0 @@ -194,6 +199,7 @@ FEXPORT(__copy_user) */ #define rem t8 + R10KCBARRIER(0(ra)) /* * The "issue break"s below are very approximate. * Issue delays for dcache fills will perturb the schedule, as will @@ -207,44 +213,45 @@ FEXPORT(__copy_user) and t1, dst, ADDRMASK PREF( 0, 1*32(src) ) PREF( 1, 1*32(dst) ) - bnez t2, copy_bytes_checklen + bnez t2, .Lcopy_bytes_checklen and t0, src, ADDRMASK PREF( 0, 2*32(src) ) PREF( 1, 2*32(dst) ) - bnez t1, dst_unaligned + bnez t1, .Ldst_unaligned nop - bnez t0, src_unaligned_dst_aligned + bnez t0, .Lsrc_unaligned_dst_aligned /* * use delay slot for fall-through * src and dst are aligned; need to compute rem */ -both_aligned: +.Lboth_aligned: SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter - beqz t0, cleanup_both_aligned # len < 8*NBYTES + beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) PREF( 0, 3*32(src) ) PREF( 1, 3*32(dst) ) .align 4 1: -EXC( LOAD t0, UNIT(0)(src), l_exc) -EXC( LOAD t1, UNIT(1)(src), l_exc_copy) -EXC( LOAD t2, UNIT(2)(src), l_exc_copy) -EXC( LOAD t3, UNIT(3)(src), l_exc_copy) + R10KCBARRIER(0(ra)) +EXC( LOAD t0, UNIT(0)(src), .Ll_exc) +EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) +EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) +EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) SUB len, len, 8*NBYTES -EXC( LOAD t4, UNIT(4)(src), l_exc_copy) -EXC( LOAD t7, UNIT(5)(src), l_exc_copy) -EXC( STORE t0, UNIT(0)(dst), s_exc_p8u) -EXC( STORE t1, UNIT(1)(dst), s_exc_p7u) -EXC( LOAD t0, UNIT(6)(src), l_exc_copy) -EXC( LOAD t1, UNIT(7)(src), l_exc_copy) +EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy) +EXC( LOAD t7, UNIT(5)(src), .Ll_exc_copy) +EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p8u) +EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p7u) +EXC( LOAD t0, UNIT(6)(src), .Ll_exc_copy) +EXC( LOAD t1, UNIT(7)(src), .Ll_exc_copy) ADD src, src, 8*NBYTES ADD dst, dst, 8*NBYTES -EXC( STORE t2, UNIT(-6)(dst), s_exc_p6u) -EXC( STORE t3, UNIT(-5)(dst), s_exc_p5u) -EXC( STORE t4, UNIT(-4)(dst), s_exc_p4u) -EXC( STORE t7, UNIT(-3)(dst), s_exc_p3u) -EXC( STORE t0, UNIT(-2)(dst), s_exc_p2u) -EXC( STORE t1, UNIT(-1)(dst), s_exc_p1u) +EXC( STORE t2, UNIT(-6)(dst), .Ls_exc_p6u) +EXC( STORE t3, UNIT(-5)(dst), .Ls_exc_p5u) +EXC( STORE t4, UNIT(-4)(dst), .Ls_exc_p4u) +EXC( STORE t7, UNIT(-3)(dst), .Ls_exc_p3u) +EXC( STORE t0, UNIT(-2)(dst), .Ls_exc_p2u) +EXC( STORE t1, UNIT(-1)(dst), .Ls_exc_p1u) PREF( 0, 8*32(src) ) PREF( 1, 8*32(dst) ) bne len, rem, 1b @@ -253,39 +260,45 @@ EXC( STORE t1, UNIT(-1)(dst), s_exc_p1u) /* * len == rem == the number of bytes left to copy < 8*NBYTES */ -cleanup_both_aligned: - beqz len, done +.Lcleanup_both_aligned: + beqz len, .Ldone sltu t0, len, 4*NBYTES - bnez t0, less_than_4units + bnez t0, .Lless_than_4units and rem, len, (NBYTES-1) # rem = len % NBYTES /* * len >= 4*NBYTES */ -EXC( LOAD t0, UNIT(0)(src), l_exc) -EXC( LOAD t1, UNIT(1)(src), l_exc_copy) -EXC( LOAD t2, UNIT(2)(src), l_exc_copy) -EXC( LOAD t3, UNIT(3)(src), l_exc_copy) +EXC( LOAD t0, UNIT(0)(src), .Ll_exc) +EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) +EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) +EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES ADD src, src, 4*NBYTES -EXC( STORE t0, UNIT(0)(dst), s_exc_p4u) -EXC( STORE t1, UNIT(1)(dst), s_exc_p3u) -EXC( STORE t2, UNIT(2)(dst), s_exc_p2u) -EXC( STORE t3, UNIT(3)(dst), s_exc_p1u) - beqz len, done - ADD dst, dst, 4*NBYTES -less_than_4units: + R10KCBARRIER(0(ra)) +EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u) +EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u) +EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u) +EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES + beqz len, .Ldone + .set noreorder +.Lless_than_4units: /* * rem = len % NBYTES */ - beq rem, len, copy_bytes + beq rem, len, .Lcopy_bytes nop 1: -EXC( LOAD t0, 0(src), l_exc) + R10KCBARRIER(0(ra)) +EXC( LOAD t0, 0(src), .Ll_exc) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), s_exc_p1u) +EXC( STORE t0, 0(dst), .Ls_exc_p1u) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES bne rem, len, 1b - ADD dst, dst, NBYTES + .set noreorder /* * src and dst are aligned, need to copy rem bytes (rem < NBYTES) @@ -299,17 +312,17 @@ EXC( STORE t0, 0(dst), s_exc_p1u) * more instruction-level parallelism. */ #define bits t2 - beqz len, done + beqz len, .Ldone ADD t1, dst, len # t1 is just past last byte of dst li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep -EXC( LOAD t0, 0(src), l_exc) +EXC( LOAD t0, 0(src), .Ll_exc) SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits -EXC( STREST t0, -1(t1), s_exc) +EXC( STREST t0, -1(t1), .Ls_exc) jr ra move len, zero -dst_unaligned: +.Ldst_unaligned: /* * dst is unaligned * t0 = src & ADDRMASK @@ -320,22 +333,23 @@ dst_unaligned: * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), l_exc) +EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) ADD t2, zero, NBYTES -EXC( LDREST t3, REST(0)(src), l_exc_copy) +EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) SUB t2, t2, t1 # t2 = number of bytes copied xor match, t0, t1 -EXC( STFIRST t3, FIRST(0)(dst), s_exc) - beq len, t2, done + R10KCBARRIER(0(ra)) +EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) + beq len, t2, .Ldone SUB len, len, t2 ADD dst, dst, t2 - beqz match, both_aligned + beqz match, .Lboth_aligned ADD src, src, t2 -src_unaligned_dst_aligned: +.Lsrc_unaligned_dst_aligned: SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter PREF( 0, 3*32(src) ) - beqz t0, cleanup_src_unaligned + beqz t0, .Lcleanup_src_unaligned and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES PREF( 1, 3*32(dst) ) 1: @@ -345,52 +359,59 @@ src_unaligned_dst_aligned: * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) + R10KCBARRIER(0(ra)) +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES -EXC( LDREST t0, REST(0)(src), l_exc_copy) -EXC( LDREST t1, REST(1)(src), l_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) -EXC( LDREST t2, REST(2)(src), l_exc_copy) -EXC( LDREST t3, REST(3)(src), l_exc_copy) +EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) +EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) +EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) +EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) ADD src, src, 4*NBYTES #ifdef CONFIG_CPU_SB1 nop # improves slotting #endif -EXC( STORE t0, UNIT(0)(dst), s_exc_p4u) -EXC( STORE t1, UNIT(1)(dst), s_exc_p3u) -EXC( STORE t2, UNIT(2)(dst), s_exc_p2u) -EXC( STORE t3, UNIT(3)(dst), s_exc_p1u) +EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u) +EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u) +EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u) +EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u) PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES bne len, rem, 1b - ADD dst, dst, 4*NBYTES + .set noreorder -cleanup_src_unaligned: - beqz len, done +.Lcleanup_src_unaligned: + beqz len, .Ldone and rem, len, NBYTES-1 # rem = len % NBYTES - beq rem, len, copy_bytes + beq rem, len, .Lcopy_bytes nop 1: -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDREST t0, REST(0)(src), l_exc_copy) + R10KCBARRIER(0(ra)) +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), s_exc_p1u) +EXC( STORE t0, 0(dst), .Ls_exc_p1u) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES bne len, rem, 1b - ADD dst, dst, NBYTES + .set noreorder -copy_bytes_checklen: - beqz len, done +.Lcopy_bytes_checklen: + beqz len, .Ldone nop -copy_bytes: +.Lcopy_bytes: /* 0 < len < NBYTES */ + R10KCBARRIER(0(ra)) #define COPY_BYTE(N) \ -EXC( lb t0, N(src), l_exc); \ +EXC( lb t0, N(src), .Ll_exc); \ SUB len, len, 1; \ - beqz len, done; \ -EXC( sb t0, N(dst), s_exc_p1) + beqz len, .Ldone; \ +EXC( sb t0, N(dst), .Ls_exc_p1) COPY_BYTE(0) COPY_BYTE(1) @@ -400,16 +421,16 @@ EXC( sb t0, N(dst), s_exc_p1) COPY_BYTE(4) COPY_BYTE(5) #endif -EXC( lb t0, NBYTES-2(src), l_exc) +EXC( lb t0, NBYTES-2(src), .Ll_exc) SUB len, len, 1 jr ra -EXC( sb t0, NBYTES-2(dst), s_exc_p1) -done: +EXC( sb t0, NBYTES-2(dst), .Ls_exc_p1) +.Ldone: jr ra nop END(memcpy) -l_exc_copy: +.Ll_exc_copy: /* * Copy bytes from src until faulting load address (or until a * lb faults) @@ -424,12 +445,14 @@ l_exc_copy: nop LOAD t0, THREAD_BUADDR(t0) 1: -EXC( lb t1, 0(src), l_exc) +EXC( lb t1, 0(src), .Ll_exc) ADD src, src, 1 sb t1, 0(dst) # can't fault -- we're copy_from_user + .set reorder /* DADDI_WAR */ + ADD dst, dst, 1 bne src, t0, 1b - ADD dst, dst, 1 -l_exc: + .set noreorder +.Ll_exc: LOAD t0, TI_TASK($28) nop LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address @@ -446,20 +469,33 @@ l_exc: * Clear len bytes starting at dst. Can't call __bzero because it * might modify len. An inefficient loop for these rare times... */ - beqz len, done - SUB src, len, 1 + .set reorder /* DADDI_WAR */ + SUB src, len, 1 + beqz len, .Ldone + .set noreorder 1: sb zero, 0(dst) ADD dst, dst, 1 +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS bnez src, 1b SUB src, src, 1 +#else + .set push + .set noat + li v1, 1 + bnez src, 1b + SUB src, src, v1 + .set pop +#endif jr ra nop -#define SEXC(n) \ -s_exc_p ## n ## u: \ - jr ra; \ - ADD len, len, n*NBYTES +#define SEXC(n) \ + .set reorder; /* DADDI_WAR */ \ +.Ls_exc_p ## n ## u: \ + ADD len, len, n*NBYTES; \ + jr ra; \ + .set noreorder SEXC(8) SEXC(7) @@ -470,10 +506,12 @@ SEXC(3) SEXC(2) SEXC(1) -s_exc_p1: +.Ls_exc_p1: + .set reorder /* DADDI_WAR */ + ADD len, len, 1 jr ra - ADD len, len, 1 -s_exc: + .set noreorder +.Ls_exc: jr ra nop @@ -484,38 +522,44 @@ LEAF(memmove) sltu t0, a1, t0 # dst + len <= src -> memcpy sltu t1, a0, t1 # dst >= src + len -> memcpy and t0, t1 - beqz t0, __memcpy + beqz t0, .L__memcpy move v0, a0 /* return value */ - beqz a2, r_out + beqz a2, .Lr_out END(memmove) /* fall through to __rmemcpy */ LEAF(__rmemcpy) /* a0=dst a1=src a2=len */ sltu t0, a1, a0 - beqz t0, r_end_bytes_up # src >= dst + beqz t0, .Lr_end_bytes_up # src >= dst nop ADD a0, a2 # dst = dst + len ADD a1, a2 # src = src + len -r_end_bytes: +.Lr_end_bytes: + R10KCBARRIER(0(ra)) lb t0, -1(a1) SUB a2, a2, 0x1 sb t0, -1(a0) SUB a1, a1, 0x1 - bnez a2, r_end_bytes - SUB a0, a0, 0x1 + .set reorder /* DADDI_WAR */ + SUB a0, a0, 0x1 + bnez a2, .Lr_end_bytes + .set noreorder -r_out: +.Lr_out: jr ra move a2, zero -r_end_bytes_up: +.Lr_end_bytes_up: + R10KCBARRIER(0(ra)) lb t0, (a1) SUB a2, a2, 0x1 sb t0, (a0) ADD a1, a1, 0x1 - bnez a2, r_end_bytes_up - ADD a0, a0, 0x1 + .set reorder /* DADDI_WAR */ + ADD a0, a0, 0x1 + bnez a2, .Lr_end_bytes_up + .set noreorder jr ra move a2, zero diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 3f8b8b3d0b2..77dc3b20110 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -5,6 +5,7 @@ * * Copyright (C) 1998, 1999, 2000 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki */ #include <asm/asm.h> #include <asm/asm-offsets.h> @@ -71,34 +72,45 @@ LEAF(memset) FEXPORT(__bzero) sltiu t0, a2, LONGSIZE /* very small region? */ - bnez t0, small_memset + bnez t0, .Lsmall_memset andi t0, a0, LONGMASK /* aligned? */ +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS beqz t0, 1f PTR_SUBU t0, LONGSIZE /* alignment in bytes */ +#else + .set noat + li AT, LONGSIZE + beqz t0, 1f + PTR_SUBU t0, AT /* alignment in bytes */ + .set at +#endif + R10KCBARRIER(0(ra)) #ifdef __MIPSEB__ - EX(LONG_S_L, a1, (a0), first_fixup) /* make word/dword aligned */ + EX(LONG_S_L, a1, (a0), .Lfirst_fixup) /* make word/dword aligned */ #endif #ifdef __MIPSEL__ - EX(LONG_S_R, a1, (a0), first_fixup) /* make word/dword aligned */ + EX(LONG_S_R, a1, (a0), .Lfirst_fixup) /* make word/dword aligned */ #endif PTR_SUBU a0, t0 /* long align ptr */ PTR_ADDU a2, t0 /* correct size */ 1: ori t1, a2, 0x3f /* # of full blocks */ xori t1, 0x3f - beqz t1, memset_partial /* no block to fill */ + beqz t1, .Lmemset_partial /* no block to fill */ andi t0, a2, 0x40-LONGSIZE PTR_ADDU t1, a0 /* end address */ .set reorder 1: PTR_ADDIU a0, 64 - f_fill64 a0, -64, a1, fwd_fixup + R10KCBARRIER(0(ra)) + f_fill64 a0, -64, a1, .Lfwd_fixup bne t1, a0, 1b .set noreorder -memset_partial: +.Lmemset_partial: + R10KCBARRIER(0(ra)) PTR_LA t1, 2f /* where to start */ #if LONGSIZE == 4 PTR_SUBU t1, t0 @@ -106,7 +118,7 @@ memset_partial: .set noat LONG_SRL AT, t0, 1 PTR_SUBU t1, AT - .set noat + .set at #endif jr t1 PTR_ADDU a0, t0 /* dest ptr */ @@ -114,26 +126,28 @@ memset_partial: .set push .set noreorder .set nomacro - f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */ + f_fill64 a0, -64, a1, .Lpartial_fixup /* ... but first do longs ... */ 2: .set pop andi a2, LONGMASK /* At most one long to go */ beqz a2, 1f PTR_ADDU a0, a2 /* What's left */ + R10KCBARRIER(0(ra)) #ifdef __MIPSEB__ - EX(LONG_S_R, a1, -1(a0), last_fixup) + EX(LONG_S_R, a1, -1(a0), .Llast_fixup) #endif #ifdef __MIPSEL__ - EX(LONG_S_L, a1, -1(a0), last_fixup) + EX(LONG_S_L, a1, -1(a0), .Llast_fixup) #endif 1: jr ra move a2, zero -small_memset: +.Lsmall_memset: beqz a2, 2f PTR_ADDU t1, a0, a2 1: PTR_ADDIU a0, 1 /* fill bytewise */ + R10KCBARRIER(0(ra)) bne t1, a0, 1b sb a1, -1(a0) @@ -141,11 +155,11 @@ small_memset: move a2, zero END(memset) -first_fixup: +.Lfirst_fixup: jr ra nop -fwd_fixup: +.Lfwd_fixup: PTR_L t0, TI_TASK($28) LONG_L t0, THREAD_BUADDR(t0) andi a2, 0x3f @@ -153,7 +167,7 @@ fwd_fixup: jr ra LONG_SUBU a2, t0 -partial_fixup: +.Lpartial_fixup: PTR_L t0, TI_TASK($28) LONG_L t0, THREAD_BUADDR(t0) andi a2, LONGMASK @@ -161,6 +175,6 @@ partial_fixup: jr ra LONG_SUBU a2, t0 -last_fixup: +.Llast_fixup: jr ra andi v1, a2, LONGMASK diff --git a/arch/mips/lib/strlen_user.S b/arch/mips/lib/strlen_user.S index eca558d83a3..fdbb970f670 100644 --- a/arch/mips/lib/strlen_user.S +++ b/arch/mips/lib/strlen_user.S @@ -24,16 +24,16 @@ LEAF(__strlen_user_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? and v0, a0 - bnez v0, fault + bnez v0, .Lfault FEXPORT(__strlen_user_nocheck_asm) move v0, a0 -1: EX(lb, t0, (v0), fault) +1: EX(lb, t0, (v0), .Lfault) PTR_ADDIU v0, 1 bnez t0, 1b PTR_SUBU v0, a0 jr ra END(__strlen_user_asm) -fault: move v0, zero +.Lfault: move v0, zero jr ra diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S index d16c76fbfac..7201b2ff08c 100644 --- a/arch/mips/lib/strncpy_user.S +++ b/arch/mips/lib/strncpy_user.S @@ -30,29 +30,30 @@ LEAF(__strncpy_from_user_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? and v0, a1 - bnez v0, fault + bnez v0, .Lfault FEXPORT(__strncpy_from_user_nocheck_asm) move v0, zero move v1, a1 .set noreorder -1: EX(lbu, t0, (v1), fault) +1: EX(lbu, t0, (v1), .Lfault) PTR_ADDIU v1, 1 + R10KCBARRIER(0(ra)) beqz t0, 2f sb t0, (a0) PTR_ADDIU v0, 1 - bne v0, a2, 1b - PTR_ADDIU a0, 1 .set reorder + PTR_ADDIU a0, 1 + bne v0, a2, 1b 2: PTR_ADDU t0, a1, v0 xor t0, a1 - bltz t0, fault + bltz t0, .Lfault jr ra # return n END(__strncpy_from_user_asm) -fault: li v0, -EFAULT +.Lfault: li v0, -EFAULT jr ra .section __ex_table,"a" - PTR 1b, fault + PTR 1b, .Lfault .previous diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index c0ea15194a0..c768e300061 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -28,18 +28,19 @@ LEAF(__strnlen_user_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? and v0, a0 - bnez v0, fault + bnez v0, .Lfault FEXPORT(__strnlen_user_nocheck_asm) move v0, a0 PTR_ADDU a1, a0 # stop pointer 1: beq v0, a1, 1f # limit reached? - EX(lb, t0, (v0), fault) + EX(lb, t0, (v0), .Lfault) PTR_ADDU v0, 1 bnez t0, 1b 1: PTR_SUBU v0, a0 jr ra END(__strnlen_user_asm) -fault: move v0, zero +.Lfault: + move v0, zero jr ra diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c index 58d14f4d934..27b012d4341 100644 --- a/arch/mips/lib/uncached.c +++ b/arch/mips/lib/uncached.c @@ -46,9 +46,9 @@ unsigned long __init run_uncached(void *func) if (sp >= (long)CKSEG0 && sp < (long)CKSEG2) usp = CKSEG1ADDR(sp); #ifdef CONFIG_64BIT - else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) && - (long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0)) - usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED, + else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0, 0) && + (long long)sp < (long long)PHYS_TO_XKPHYS(8, 0)) + usp = PHYS_TO_XKPHYS(K_CALG_UNCACHED, XKPHYS_TO_PHYS((long long)sp)); #endif else { @@ -58,9 +58,9 @@ unsigned long __init run_uncached(void *func) if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2) ufunc = CKSEG1ADDR(lfunc); #ifdef CONFIG_64BIT - else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) && - (long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0)) - ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED, + else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0, 0) && + (long long)lfunc < (long long)PHYS_TO_XKPHYS(8, 0)) + ufunc = PHYS_TO_XKPHYS(K_CALG_UNCACHED, XKPHYS_TO_PHYS((long long)lfunc)); #endif else { diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index e405d112a06..5c500802271 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -34,12 +34,6 @@ #include <asm/time.h> #include <asm/traps.h> -extern void mips_reboot_setup(void); - -#ifdef CONFIG_KGDB -extern void kgdb_config(void); -#endif - static void __init serial_init(void); const char *get_system_type(void) diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 30f1f54cb68..1695dca5506 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -250,6 +250,8 @@ void __init mips_ejtag_setup(void) flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } +extern struct plat_smp_ops msmtc_smp_ops; + void __init prom_init(void) { prom_argc = fw_arg0; @@ -416,4 +418,10 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif +#ifdef CONFIG_MIPS_MT_SMP + register_smp_ops(&vsmp_smp_ops); +#endif +#ifdef CONFIG_MIPS_MT_SMTC + register_smp_ops(&msmtc_smp_ops); +#endif } diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index f010261b75d..dbe60eb55e2 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -26,13 +26,13 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/kernel_stat.h> #include <linux/kernel.h> #include <linux/random.h> #include <asm/i8259.h> #include <asm/irq_cpu.h> -#include <asm/io.h> #include <asm/irq_regs.h> #include <asm/mips-boards/malta.h> #include <asm/mips-boards/maltaint.h> @@ -47,7 +47,7 @@ static DEFINE_SPINLOCK(mips_irq_lock); static inline int mips_pcibios_iack(void) { int irq; - u32 dummy; + u32 dummy; /* * Determine highest priority pending interrupt by performing @@ -58,7 +58,7 @@ static inline int mips_pcibios_iack(void) case MIPS_REVISION_SCON_ROCIT: case MIPS_REVISION_SCON_SOCITSC: case MIPS_REVISION_SCON_SOCITSCP: - MSC_READ(MSC01_PCI_IACK, irq); + MSC_READ(MSC01_PCI_IACK, irq); irq &= 0xff; break; case MIPS_REVISION_SCON_GT64120: @@ -83,7 +83,7 @@ static inline int mips_pcibios_iack(void) BONITO_PCIMAP_CFG = 0; break; default: - printk("Unknown system controller.\n"); + printk(KERN_WARNING "Unknown system controller.\n"); return -1; } return irq; @@ -114,7 +114,8 @@ static void malta_hw0_irqdispatch(void) irq = get_int(); if (irq < 0) { - return; /* interrupt has already been cleared */ + /* interrupt has already been cleared */ + return; } do_IRQ(MALTA_INT_BASE + irq); @@ -123,15 +124,15 @@ static void malta_hw0_irqdispatch(void) static void corehi_irqdispatch(void) { unsigned int intedge, intsteer, pcicmd, pcibadaddr; - unsigned int pcimstat, intisr, inten, intpol; + unsigned int pcimstat, intisr, inten, intpol; unsigned int intrcause, datalo, datahi; struct pt_regs *regs = get_irq_regs(); - printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n"); - printk("epc : %08lx\nStatus: %08lx\n" - "Cause : %08lx\nbadVaddr : %08lx\n", - regs->cp0_epc, regs->cp0_status, - regs->cp0_cause, regs->cp0_badvaddr); + printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); + printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" + "Cause : %08lx\nbadVaddr : %08lx\n", + regs->cp0_epc, regs->cp0_status, + regs->cp0_cause, regs->cp0_badvaddr); /* Read all the registers and then print them as there is a problem with interspersed printk's upsetting the Bonito controller. @@ -139,41 +140,41 @@ static void corehi_irqdispatch(void) */ switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_SOCIT: case MIPS_REVISION_SCON_ROCIT: case MIPS_REVISION_SCON_SOCITSC: case MIPS_REVISION_SCON_SOCITSCP: - ll_msc_irq(); - break; - case MIPS_REVISION_SCON_GT64120: - intrcause = GT_READ(GT_INTRCAUSE_OFS); - datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); - datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); - printk("GT_INTRCAUSE = %08x\n", intrcause); - printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo); - break; - case MIPS_REVISION_SCON_BONITO: - pcibadaddr = BONITO_PCIBADADDR; - pcimstat = BONITO_PCIMSTAT; - intisr = BONITO_INTISR; - inten = BONITO_INTEN; - intpol = BONITO_INTPOL; - intedge = BONITO_INTEDGE; - intsteer = BONITO_INTSTEER; - pcicmd = BONITO_PCICMD; - printk("BONITO_INTISR = %08x\n", intisr); - printk("BONITO_INTEN = %08x\n", inten); - printk("BONITO_INTPOL = %08x\n", intpol); - printk("BONITO_INTEDGE = %08x\n", intedge); - printk("BONITO_INTSTEER = %08x\n", intsteer); - printk("BONITO_PCICMD = %08x\n", pcicmd); - printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr); - printk("BONITO_PCIMSTAT = %08x\n", pcimstat); - break; - } - - /* We die here*/ - die("CoreHi interrupt", regs); + ll_msc_irq(); + break; + case MIPS_REVISION_SCON_GT64120: + intrcause = GT_READ(GT_INTRCAUSE_OFS); + datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); + datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); + printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause); + printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n", + datahi, datalo); + break; + case MIPS_REVISION_SCON_BONITO: + pcibadaddr = BONITO_PCIBADADDR; + pcimstat = BONITO_PCIMSTAT; + intisr = BONITO_INTISR; + inten = BONITO_INTEN; + intpol = BONITO_INTPOL; + intedge = BONITO_INTEDGE; + intsteer = BONITO_INTSTEER; + pcicmd = BONITO_PCICMD; + printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr); + printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten); + printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol); + printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge); + printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer); + printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd); + printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr); + printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat); + break; + } + + die("CoreHi interrupt", regs); } static inline int clz(unsigned long x) @@ -214,9 +215,9 @@ static inline unsigned int irq_ffs(unsigned int pending) t0 = pending & 0x8000; t0 = t0 < 1; - //t0 = t0 << 2; + /* t0 = t0 << 2; */ a0 = a0 - t0; - //pending = pending << t0; + /* pending = pending << t0; */ return a0; #endif @@ -299,21 +300,29 @@ void __init arch_init_irq(void) if (!cpu_has_veic) mips_cpu_irq_init(); - switch(mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: if (cpu_has_veic) - init_msc_irqs(MIPS_MSC01_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); + init_msc_irqs(MIPS_MSC01_IC_REG_BASE, + MSC01E_INT_BASE, msc_eicirqmap, + msc_nr_eicirqs); else - init_msc_irqs(MIPS_MSC01_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); + init_msc_irqs(MIPS_MSC01_IC_REG_BASE, + MSC01C_INT_BASE, msc_irqmap, + msc_nr_irqs); break; - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: if (cpu_has_veic) - init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); + init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, + MSC01E_INT_BASE, msc_eicirqmap, + msc_nr_eicirqs); else - init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); + init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, + MSC01C_INT_BASE, msc_irqmap, + msc_nr_irqs); } if (cpu_has_veic) { @@ -321,8 +330,7 @@ void __init arch_init_irq(void) set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); - } - else if (cpu_has_vint) { + } else if (cpu_has_vint) { set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); #ifdef CONFIG_MIPS_MT_SMTC @@ -344,11 +352,12 @@ void __init arch_init_irq(void) } #else /* Not SMTC */ setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction); #endif /* CONFIG_MIPS_MT_SMTC */ - } - else { + } else { setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction); } } diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index bc43a5c2224..2cd8f5734b3 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -1,6 +1,7 @@ /* * Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) Dmitri Vorobiev * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -15,39 +16,57 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ +#include <linux/cpu.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/ioport.h> +#include <linux/irq.h> #include <linux/pci.h> #include <linux/screen_info.h> +#include <linux/time.h> -#include <asm/cpu.h> #include <asm/bootinfo.h> -#include <asm/irq.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> #include <asm/mips-boards/malta.h> #include <asm/mips-boards/maltaint.h> #include <asm/dma.h> -#include <asm/time.h> #include <asm/traps.h> #ifdef CONFIG_VT #include <linux/console.h> #endif -extern void mips_reboot_setup(void); -extern unsigned long mips_rtc_get_time(void); - -#ifdef CONFIG_KGDB -extern void kgdb_config(void); -#endif - struct resource standard_io_resources[] = { - { .name = "dma1", .start = 0x00, .end = 0x1f, .flags = IORESOURCE_BUSY }, - { .name = "timer", .start = 0x40, .end = 0x5f, .flags = IORESOURCE_BUSY }, - { .name = "keyboard", .start = 0x60, .end = 0x6f, .flags = IORESOURCE_BUSY }, - { .name = "dma page reg", .start = 0x80, .end = 0x8f, .flags = IORESOURCE_BUSY }, - { .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY }, + { + .name = "dma1", + .start = 0x00, + .end = 0x1f, + .flags = IORESOURCE_BUSY + }, + { + .name = "timer", + .start = 0x40, + .end = 0x5f, + .flags = IORESOURCE_BUSY + }, + { + .name = "keyboard", + .start = 0x60, + .end = 0x6f, + .flags = IORESOURCE_BUSY + }, + { + .name = "dma page reg", + .start = 0x80, + .end = 0x8f, + .flags = IORESOURCE_BUSY + }, + { + .name = "dma2", + .start = 0xc0, + .end = 0xdf, + .flags = IORESOURCE_BUSY + }, }; const char *get_system_type(void) @@ -62,7 +81,7 @@ const char display_string[] = " LINUX ON MALTA "; #endif /* CONFIG_MIPS_MT_SMTC */ #ifdef CONFIG_BLK_DEV_FD -void __init fd_activate(void) +static void __init fd_activate(void) { /* * Activate Floppy Controller in the SMSC FDC37M817 Super I/O @@ -83,6 +102,85 @@ void __init fd_activate(void) } #endif +#ifdef CONFIG_BLK_DEV_IDE +static void __init pci_clock_check(void) +{ + unsigned int __iomem *jmpr_p = + (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); + int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; + static const int pciclocks[] __initdata = { + 33, 20, 25, 30, 12, 16, 37, 10 + }; + int pciclock = pciclocks[jmpr]; + char *argptr = prom_getcmdline(); + + if (pciclock != 33 && !strstr(argptr, "idebus=")) { + printk(KERN_WARNING "WARNING: PCI clock is %dMHz, " + "setting idebus\n", pciclock); + argptr += strlen(argptr); + sprintf(argptr, " idebus=%d", pciclock); + if (pciclock < 20 || pciclock > 66) + printk(KERN_WARNING "WARNING: IDE timing " + "calculations will be incorrect\n"); + } +} +#endif + +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) +static void __init screen_info_setup(void) +{ + screen_info = (struct screen_info) { + .orig_x = 0, + .orig_y = 25, + .ext_mem_k = 0, + .orig_video_page = 0, + .orig_video_mode = 0, + .orig_video_cols = 80, + .unused2 = 0, + .orig_video_ega_bx = 0, + .unused3 = 0, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16 + }; +} +#endif + +static void __init bonito_quirks_setup(void) +{ + char *argptr; + + argptr = prom_getcmdline(); + if (strstr(argptr, "debug")) { + BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; + printk(KERN_INFO "Enabled Bonito debug mode\n"); + } else + BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; + +#ifdef CONFIG_DMA_COHERENT + if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { + BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; + printk(KERN_INFO "Enabled Bonito CPU coherency\n"); + + argptr = prom_getcmdline(); + if (strstr(argptr, "iobcuncached")) { + BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; + BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & + ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + printk(KERN_INFO "Disabled Bonito IOBC coherency\n"); + } else { + BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; + BONITO_PCIMEMBASECFG |= + (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + printk(KERN_INFO "Enabled Bonito IOBC coherency\n"); + } + } else + panic("Hardware DMA cache coherency not supported"); +#endif +} + void __init plat_mem_setup(void) { unsigned int i; @@ -102,86 +200,24 @@ void __init plat_mem_setup(void) kgdb_config(); #endif - if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) { - char *argptr; - - argptr = prom_getcmdline(); - if (strstr(argptr, "debug")) { - BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; - printk("Enabled Bonito debug mode\n"); - } - else - BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; - -#ifdef CONFIG_DMA_COHERENT - if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; - printk("Enabled Bonito CPU coherency\n"); - - argptr = prom_getcmdline(); - if (strstr(argptr, "iobcuncached")) { - BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk("Disabled Bonito IOBC coherency\n"); - } - else { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG |= - (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk("Enabled Bonito IOBC coherency\n"); - } - } - else - panic("Hardware DMA cache coherency not supported"); - -#endif - } #ifdef CONFIG_DMA_COHERENT - else { + if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) panic("Hardware DMA cache coherency not supported"); - } #endif + if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) + bonito_quirks_setup(); + #ifdef CONFIG_BLK_DEV_IDE - /* Check PCI clock */ - { - unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); - int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; - static const int pciclocks[] __initdata = { - 33, 20, 25, 30, 12, 16, 37, 10 - }; - int pciclock = pciclocks[jmpr]; - char *argptr = prom_getcmdline(); - - if (pciclock != 33 && !strstr (argptr, "idebus=")) { - printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock); - argptr += strlen(argptr); - sprintf(argptr, " idebus=%d", pciclock); - if (pciclock < 20 || pciclock > 66) - printk("WARNING: IDE timing calculations will be incorrect\n"); - } - } + pci_clock_check(); #endif + #ifdef CONFIG_BLK_DEV_FD fd_activate(); #endif -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - screen_info = (struct screen_info) { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - VIDEO_TYPE_VGAC, /* orig-video-isVGA */ - 16 /* orig-video-points */ - }; -#endif + +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) + screen_info_setup(); #endif mips_reboot_setup(); } diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mips-boards/malta/malta_smtc.c index 5c980f4a48f..5ea705e4945 100644 --- a/arch/mips/mips-boards/malta/malta_smtc.c +++ b/arch/mips/mips-boards/malta/malta_smtc.c @@ -15,28 +15,26 @@ * Cause the specified action to be performed on a targeted "CPU" */ -void core_send_ipi(int cpu, unsigned int action) +static void msmtc_send_ipi_single(int cpu, unsigned int action) { /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ smtc_send_ipi(cpu, LINUX_SMP_IPI, action); } -/* - * Platform "CPU" startup hook - */ - -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) +static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action) { - smtc_boot_secondary(cpu, idle); + unsigned int i; + + for_each_cpu_mask(i, mask) + msmtc_send_ipi_single(i, action); } /* * Post-config but pre-boot cleanup entry point */ - -void __cpuinit prom_init_secondary(void) +static void __cpuinit msmtc_init_secondary(void) { - void smtc_init_secondary(void); + void smtc_init_secondary(void); int myvpe; /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ @@ -50,45 +48,61 @@ void __cpuinit prom_init_secondary(void) set_c0_status(0x100 << cp0_perfcount_irq); } - smtc_init_secondary(); + smtc_init_secondary(); } /* - * Platform SMP pre-initialization - * - * As noted above, we can assume a single CPU for now - * but it may be multithreaded. + * Platform "CPU" startup hook */ - -void __cpuinit plat_smp_setup(void) +static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle) { - if (read_c0_config3() & (1<<2)) - mipsmt_build_cpu_map(0); + smtc_boot_secondary(cpu, idle); } -void __init plat_prepare_cpus(unsigned int max_cpus) +/* + * SMP initialization finalization entry point + */ +static void __cpuinit msmtc_smp_finish(void) { - if (read_c0_config3() & (1<<2)) - mipsmt_prepare_cpus(); + smtc_smp_finish(); } /* - * SMP initialization finalization entry point + * Hook for after all CPUs are online */ -void __cpuinit prom_smp_finish(void) +static void msmtc_cpus_done(void) { - smtc_smp_finish(); } /* - * Hook for after all CPUs are online + * Platform SMP pre-initialization + * + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. */ -void prom_cpus_done(void) +static void __init msmtc_smp_setup(void) { + mipsmt_build_cpu_map(0); } +static void __init msmtc_prepare_cpus(unsigned int max_cpus) +{ + mipsmt_prepare_cpus(); +} + +struct plat_smp_ops msmtc_smp_ops = { + .send_ipi_single = msmtc_send_ipi_single, + .send_ipi_mask = msmtc_send_ipi_mask, + .init_secondary = msmtc_init_secondary, + .smp_finish = msmtc_smp_finish, + .cpus_done = msmtc_cpus_done, + .boot_secondary = msmtc_boot_secondary, + .smp_setup = msmtc_smp_setup, + .prepare_cpus = msmtc_prepare_cpus, +}; + #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF /* * IRQ affinity hook diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index 1fb61b85230..8aa8e5b7b07 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -34,8 +34,6 @@ #include <asm/mips-boards/seadint.h> #include <asm/time.h> -extern void mips_reboot_setup(void); - static void __init serial_init(void); const char *get_system_type(void) diff --git a/arch/mips/mipssim/Makefile b/arch/mips/mipssim/Makefile index 75568b584df..57f43c1c788 100644 --- a/arch/mips/mipssim/Makefile +++ b/arch/mips/mipssim/Makefile @@ -21,6 +21,6 @@ obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \ sim_cmdline.o obj-$(CONFIG_EARLY_PRINTK) += sim_console.o -obj-$(CONFIG_SMP) += sim_smp.o +obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index 452c129d02c..d49fe73426b 100644 --- a/arch/mips/mipssim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -60,6 +60,8 @@ void __init plat_mem_setup(void) #endif } +extern struct plat_smp_ops ssmtc_smp_ops; + void __init prom_init(void) { set_io_port_base(0xbfd00000); @@ -67,8 +69,20 @@ void __init prom_init(void) pr_info("\nLINUX started...\n"); prom_init_cmdline(); prom_meminit(); -} +#ifdef CONFIG_MIPS_MT_SMP + if (cpu_has_mipsmt) + register_smp_ops(&vsmp_smp_ops); + else + register_smp_ops(&up_smp_ops); +#endif +#ifdef CONFIG_MIPS_MT_SMTC + if (cpu_has_mipsmt) + register_smp_ops(&ssmtc_smp_ops); + else + register_smp_ops(&up_smp_ops); +#endif +} static void __init serial_init(void) { diff --git a/arch/mips/mipssim/sim_smp.c b/arch/mips/mipssim/sim_smtc.c index ccbbccac23e..d6e4f656ad1 100644 --- a/arch/mips/mipssim/sim_smp.c +++ b/arch/mips/mipssim/sim_smtc.c @@ -16,7 +16,7 @@ * */ /* - * Simulator Platform-specific hooks for SMP operation + * Simulator Platform-specific hooks for SMTC operation */ #include <linux/kernel.h> #include <linux/sched.h> @@ -29,65 +29,72 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/mmu_context.h> -#ifdef CONFIG_MIPS_MT_SMTC #include <asm/smtc_ipi.h> -#endif /* CONFIG_MIPS_MT_SMTC */ /* VPE/SMP Prototype implements platform interfaces directly */ -#if !defined(CONFIG_MIPS_MT_SMP) /* * Cause the specified action to be performed on a targeted "CPU" */ -void core_send_ipi(int cpu, unsigned int action) +static void ssmtc_send_ipi_single(int cpu, unsigned int action) { -#ifdef CONFIG_MIPS_MT_SMTC smtc_send_ipi(cpu, LINUX_SMP_IPI, action); -#endif /* CONFIG_MIPS_MT_SMTC */ -/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ + /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ +} + +static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + for_each_cpu_mask(i, mask) + ssmtc_send_ipi_single(i, action); } /* - * Platform "CPU" startup hook + * Post-config but pre-boot cleanup entry point */ - -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) +static void __cpuinit ssmtc_init_secondary(void) { -#ifdef CONFIG_MIPS_MT_SMTC - smtc_boot_secondary(cpu, idle); -#endif /* CONFIG_MIPS_MT_SMTC */ + void smtc_init_secondary(void); + + smtc_init_secondary(); } /* - * Post-config but pre-boot cleanup entry point + * SMP initialization finalization entry point */ +static void __cpuinit ssmtc_smp_finish(void) +{ + smtc_smp_finish(); +} -void __cpuinit prom_init_secondary(void) +/* + * Hook for after all CPUs are online + */ +static void ssmtc_cpus_done(void) { -#ifdef CONFIG_MIPS_MT_SMTC - void smtc_init_secondary(void); +} - smtc_init_secondary(); -#endif /* CONFIG_MIPS_MT_SMTC */ +/* + * Platform "CPU" startup hook + */ +static void __cpuinit ssmtc_boot_secondary(int cpu, struct task_struct *idle) +{ + smtc_boot_secondary(cpu, idle); } -void plat_smp_setup(void) +static void __init ssmtc_smp_setup(void) { -#ifdef CONFIG_MIPS_MT_SMTC if (read_c0_config3() & (1 << 2)) mipsmt_build_cpu_map(0); -#endif /* CONFIG_MIPS_MT_SMTC */ } /* * Platform SMP pre-initialization */ - -void plat_prepare_cpus(unsigned int max_cpus) +static void ssmtc_prepare_cpus(unsigned int max_cpus) { -#ifdef CONFIG_MIPS_MT_SMTC /* * As noted above, we can assume a single CPU for now * but it may be multithreaded. @@ -96,28 +103,15 @@ void plat_prepare_cpus(unsigned int max_cpus) if (read_c0_config3() & (1 << 2)) { mipsmt_prepare_cpus(); } -#endif /* CONFIG_MIPS_MT_SMTC */ } -/* - * SMP initialization finalization entry point - */ - -void __cpuinit prom_smp_finish(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - smtc_smp_finish(); -#endif /* CONFIG_MIPS_MT_SMTC */ -} - -/* - * Hook for after all CPUs are online - */ - -void prom_cpus_done(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - -#endif /* CONFIG_MIPS_MT_SMTC */ -} -#endif /* CONFIG_MIPS32R2_MT_SMP */ +struct plat_smp_ops ssmtc_smp_ops = { + .send_ipi_single = ssmtc_send_ipi_single, + .send_ipi_mask = ssmtc_send_ipi_mask, + .init_secondary = ssmtc_init_secondary, + .smp_finish = ssmtc_smp_finish, + .cpus_done = ssmtc_cpus_done, + .boot_secondary = ssmtc_boot_secondary, + .smp_setup = ssmtc_smp_setup, + .prepare_cpus = ssmtc_prepare_cpus, +}; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 9355f1c9325..02bd180f0e0 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -449,7 +449,7 @@ static inline void local_r4k_flush_cache_page(void *args) * If the page isn't marked valid, the page cannot possibly be * in the cache. */ - if (!(pte_val(*ptep) & _PAGE_PRESENT)) + if (!(pte_present(*ptep))) return; if ((mm == current->active_mm) && (pte_val(*ptep) & _PAGE_VALID)) @@ -468,8 +468,6 @@ static inline void local_r4k_flush_cache_page(void *args) if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) { r4k_blast_dcache_page(addr); - if (exec && !cpu_icache_snoops_remote_store) - r4k_blast_scache_page(addr); } if (exec) { if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) { @@ -533,13 +531,6 @@ static inline void local_r4k_flush_icache_range(void *args) R4600_HIT_CACHEOP_WAR_IMPL; protected_blast_dcache_range(start, end); } - - if (!cpu_icache_snoops_remote_store && scache_size) { - if (end - start > scache_size) - r4k_blast_scache(); - else - protected_blast_scache_range(start, end); - } } if (end - start > icache_size) @@ -598,7 +589,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) if (size >= scache_size) r4k_blast_scache(); else - blast_scache_range(addr, addr + size); + blast_inv_scache_range(addr, addr + size); return; } @@ -606,7 +597,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) r4k_blast_dcache(); } else { R4600_HIT_CACHEOP_WAR_IMPL; - blast_dcache_range(addr, addr + size); + blast_inv_dcache_range(addr, addr + size); } bc_inv(addr, size); @@ -989,6 +980,8 @@ static void __init probe_pcache(void) case CPU_AU1100: case CPU_AU1550: case CPU_AU1200: + case CPU_AU1210: + case CPU_AU1250: c->icache.flags |= MIPS_CACHE_IC_F_DC; break; } diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 810535dd091..ae39dd88b9a 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -383,7 +383,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, BUG_ON(direction == DMA_NONE); if (!plat_device_is_coherent(dev)) - dma_cache_wback_inv((unsigned long)vaddr, size); + __dma_sync((unsigned long)vaddr, size, direction); } EXPORT_SYMBOL(dma_cache_sync); diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c index 4f770ac885c..9185fbf37c0 100644 --- a/arch/mips/mm/pg-r4k.c +++ b/arch/mips/mm/pg-r4k.c @@ -4,6 +4,7 @@ * for more details. * * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2007 Maciej W. Rozycki */ #include <linux/init.h> #include <linux/kernel.h> @@ -12,6 +13,7 @@ #include <linux/module.h> #include <linux/proc_fs.h> +#include <asm/bugs.h> #include <asm/cacheops.h> #include <asm/inst.h> #include <asm/io.h> @@ -255,64 +257,58 @@ static inline void build_store_reg(int reg) __build_store_reg(reg); } -static inline void build_addiu_a2_a0(unsigned long offset) +static inline void build_addiu_rt_rs(unsigned int rt, unsigned int rs, + unsigned long offset) { union mips_instruction mi; BUG_ON(offset > 0x7fff); - mi.i_format.opcode = cpu_has_64bit_gp_regs ? daddiu_op : addiu_op; - mi.i_format.rs = 4; /* $a0 */ - mi.i_format.rt = 6; /* $a2 */ - mi.i_format.simmediate = offset; + if (cpu_has_64bit_gp_regs && DADDI_WAR && r4k_daddiu_bug()) { + mi.i_format.opcode = addiu_op; + mi.i_format.rs = 0; /* $zero */ + mi.i_format.rt = 25; /* $t9 */ + mi.i_format.simmediate = offset; + emit_instruction(mi); + mi.r_format.opcode = spec_op; + mi.r_format.rs = rs; + mi.r_format.rt = 25; /* $t9 */ + mi.r_format.rd = rt; + mi.r_format.re = 0; + mi.r_format.func = daddu_op; + } else { + mi.i_format.opcode = cpu_has_64bit_gp_regs ? + daddiu_op : addiu_op; + mi.i_format.rs = rs; + mi.i_format.rt = rt; + mi.i_format.simmediate = offset; + } emit_instruction(mi); } -static inline void build_addiu_a2(unsigned long offset) +static inline void build_addiu_a2_a0(unsigned long offset) { - union mips_instruction mi; - - BUG_ON(offset > 0x7fff); - - mi.i_format.opcode = cpu_has_64bit_gp_regs ? daddiu_op : addiu_op; - mi.i_format.rs = 6; /* $a2 */ - mi.i_format.rt = 6; /* $a2 */ - mi.i_format.simmediate = offset; + build_addiu_rt_rs(6, 4, offset); /* $a2, $a0, offset */ +} - emit_instruction(mi); +static inline void build_addiu_a2(unsigned long offset) +{ + build_addiu_rt_rs(6, 6, offset); /* $a2, $a2, offset */ } static inline void build_addiu_a1(unsigned long offset) { - union mips_instruction mi; - - BUG_ON(offset > 0x7fff); - - mi.i_format.opcode = cpu_has_64bit_gp_regs ? daddiu_op : addiu_op; - mi.i_format.rs = 5; /* $a1 */ - mi.i_format.rt = 5; /* $a1 */ - mi.i_format.simmediate = offset; + build_addiu_rt_rs(5, 5, offset); /* $a1, $a1, offset */ load_offset -= offset; - - emit_instruction(mi); } static inline void build_addiu_a0(unsigned long offset) { - union mips_instruction mi; - - BUG_ON(offset > 0x7fff); - - mi.i_format.opcode = cpu_has_64bit_gp_regs ? daddiu_op : addiu_op; - mi.i_format.rs = 4; /* $a0 */ - mi.i_format.rt = 4; /* $a0 */ - mi.i_format.simmediate = offset; + build_addiu_rt_rs(4, 4, offset); /* $a0, $a0, offset */ store_offset -= offset; - - emit_instruction(mi); } static inline void build_bne(unsigned int *dest) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index a61246d3533..d026302e0ec 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -6,7 +6,7 @@ * Synthesize TLB refill handlers at runtime. * * Copyright (C) 2004,2005,2006 by Thiemo Seufer - * Copyright (C) 2005 Maciej W. Rozycki + * Copyright (C) 2005, 2007 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) * * ... and the days got worse and worse and now you see @@ -19,20 +19,15 @@ * (Condolences to Napoleon XIV) */ -#include <stdarg.h> - -#include <linux/mm.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/string.h> #include <linux/init.h> -#include <asm/pgtable.h> -#include <asm/cacheflush.h> +#include <asm/bugs.h> #include <asm/mmu_context.h> #include <asm/inst.h> #include <asm/elf.h> -#include <asm/smp.h> #include <asm/war.h> static inline int r45k_bvahwbug(void) @@ -66,7 +61,7 @@ static inline int __maybe_unused r10000_llsc_war(void) * why; it's not an issue caused by the core RTL. * */ -static __init int __attribute__((unused)) m4kc_tlbp_war(void) +static int __init m4kc_tlbp_war(void) { return (current_cpu_data.processor_id & 0xffff00) == (PRID_COMP_MIPS | PRID_IMP_4KC); @@ -140,7 +135,7 @@ struct insn { | (e) << RE_SH \ | (f) << FUNC_SH) -static __initdata struct insn insn_table[] = { +static struct insn insn_table[] __initdata = { { insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD }, { insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD }, @@ -193,7 +188,7 @@ static __initdata struct insn insn_table[] = { #undef M -static __init u32 build_rs(u32 arg) +static u32 __init build_rs(u32 arg) { if (arg & ~RS_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -201,7 +196,7 @@ static __init u32 build_rs(u32 arg) return (arg & RS_MASK) << RS_SH; } -static __init u32 build_rt(u32 arg) +static u32 __init build_rt(u32 arg) { if (arg & ~RT_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -209,7 +204,7 @@ static __init u32 build_rt(u32 arg) return (arg & RT_MASK) << RT_SH; } -static __init u32 build_rd(u32 arg) +static u32 __init build_rd(u32 arg) { if (arg & ~RD_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -217,7 +212,7 @@ static __init u32 build_rd(u32 arg) return (arg & RD_MASK) << RD_SH; } -static __init u32 build_re(u32 arg) +static u32 __init build_re(u32 arg) { if (arg & ~RE_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -225,7 +220,7 @@ static __init u32 build_re(u32 arg) return (arg & RE_MASK) << RE_SH; } -static __init u32 build_simm(s32 arg) +static u32 __init build_simm(s32 arg) { if (arg > 0x7fff || arg < -0x8000) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -233,7 +228,7 @@ static __init u32 build_simm(s32 arg) return arg & 0xffff; } -static __init u32 build_uimm(u32 arg) +static u32 __init build_uimm(u32 arg) { if (arg & ~IMM_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -241,7 +236,7 @@ static __init u32 build_uimm(u32 arg) return arg & IMM_MASK; } -static __init u32 build_bimm(s32 arg) +static u32 __init build_bimm(s32 arg) { if (arg > 0x1ffff || arg < -0x20000) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -252,7 +247,7 @@ static __init u32 build_bimm(s32 arg) return ((arg < 0) ? (1 << 15) : 0) | ((arg >> 2) & 0x7fff); } -static __init u32 build_jimm(u32 arg) +static u32 __init build_jimm(u32 arg) { if (arg & ~((JIMM_MASK) << 2)) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -260,7 +255,7 @@ static __init u32 build_jimm(u32 arg) return (arg >> 2) & JIMM_MASK; } -static __init u32 build_func(u32 arg) +static u32 __init build_func(u32 arg) { if (arg & ~FUNC_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -268,7 +263,7 @@ static __init u32 build_func(u32 arg) return arg & FUNC_MASK; } -static __init u32 build_set(u32 arg) +static u32 __init build_set(u32 arg) { if (arg & ~SET_MASK) printk(KERN_WARNING "TLB synthesizer field overflow\n"); @@ -293,7 +288,7 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...) break; } - if (!ip) + if (!ip || (opc == insn_daddiu && r4k_daddiu_bug())) panic("Unsupported TLB synthesizer instruction %d", opc); op = ip->match; @@ -315,69 +310,69 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...) } #define I_u1u2u3(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ unsigned int b, unsigned int c) \ { \ build_insn(buf, insn##op, a, b, c); \ } #define I_u2u1u3(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ unsigned int b, unsigned int c) \ { \ build_insn(buf, insn##op, b, a, c); \ } #define I_u3u1u2(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ unsigned int b, unsigned int c) \ { \ build_insn(buf, insn##op, b, c, a); \ } #define I_u1u2s3(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ unsigned int b, signed int c) \ { \ build_insn(buf, insn##op, a, b, c); \ } #define I_u2s3u1(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ signed int b, unsigned int c) \ { \ build_insn(buf, insn##op, c, a, b); \ } #define I_u2u1s3(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ unsigned int b, signed int c) \ { \ build_insn(buf, insn##op, b, a, c); \ } #define I_u1u2(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ unsigned int b) \ { \ build_insn(buf, insn##op, a, b); \ } #define I_u1s2(op) \ - static inline void __init i##op(u32 **buf, unsigned int a, \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \ signed int b) \ { \ build_insn(buf, insn##op, a, b); \ } #define I_u1(op) \ - static inline void __init i##op(u32 **buf, unsigned int a) \ + static void __init __maybe_unused i##op(u32 **buf, unsigned int a) \ { \ build_insn(buf, insn##op, a); \ } #define I_0(op) \ - static inline void __init i##op(u32 **buf) \ + static void __init __maybe_unused i##op(u32 **buf) \ { \ build_insn(buf, insn##op); \ } @@ -457,7 +452,7 @@ struct label { enum label_id lab; }; -static __init void build_label(struct label **lab, u32 *addr, +static void __init build_label(struct label **lab, u32 *addr, enum label_id l) { (*lab)->addr = addr; @@ -466,7 +461,7 @@ static __init void build_label(struct label **lab, u32 *addr, } #define L_LA(lb) \ - static inline void l##lb(struct label **lab, u32 *addr) \ + static inline void __init l##lb(struct label **lab, u32 *addr) \ { \ build_label(lab, addr, label##lb); \ } @@ -525,37 +520,46 @@ L_LA(_r3000_write_probe_fail) #define i_ssnop(buf) i_sll(buf, 0, 0, 1) #define i_ehb(buf) i_sll(buf, 0, 0, 3) -#ifdef CONFIG_64BIT -static __init int __maybe_unused in_compat_space_p(long addr) +static int __init __maybe_unused in_compat_space_p(long addr) { /* Is this address in 32bit compat space? */ +#ifdef CONFIG_64BIT return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L); +#else + return 1; +#endif } -static __init int __maybe_unused rel_highest(long val) +static int __init __maybe_unused rel_highest(long val) { +#ifdef CONFIG_64BIT return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000; +#else + return 0; +#endif } -static __init int __maybe_unused rel_higher(long val) +static int __init __maybe_unused rel_higher(long val) { +#ifdef CONFIG_64BIT return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000; -} +#else + return 0; #endif +} -static __init int rel_hi(long val) +static int __init rel_hi(long val) { return ((((val + 0x8000L) >> 16) & 0xffff) ^ 0x8000) - 0x8000; } -static __init int rel_lo(long val) +static int __init rel_lo(long val) { return ((val & 0xffff) ^ 0x8000) - 0x8000; } -static __init void i_LA_mostly(u32 **buf, unsigned int rs, long addr) +static void __init i_LA_mostly(u32 **buf, unsigned int rs, long addr) { -#ifdef CONFIG_64BIT if (!in_compat_space_p(addr)) { i_lui(buf, rs, rel_highest(addr)); if (rel_higher(addr)) @@ -567,16 +571,18 @@ static __init void i_LA_mostly(u32 **buf, unsigned int rs, long addr) } else i_dsll32(buf, rs, rs, 0); } else -#endif i_lui(buf, rs, rel_hi(addr)); } -static __init void __maybe_unused i_LA(u32 **buf, unsigned int rs, - long addr) +static void __init __maybe_unused i_LA(u32 **buf, unsigned int rs, long addr) { i_LA_mostly(buf, rs, addr); - if (rel_lo(addr)) - i_ADDIU(buf, rs, rs, rel_lo(addr)); + if (rel_lo(addr)) { + if (!in_compat_space_p(addr)) + i_daddiu(buf, rs, rs, rel_lo(addr)); + else + i_addiu(buf, rs, rs, rel_lo(addr)); + } } /* @@ -589,7 +595,7 @@ struct reloc { enum label_id lab; }; -static __init void r_mips_pc16(struct reloc **rel, u32 *addr, +static void __init r_mips_pc16(struct reloc **rel, u32 *addr, enum label_id l) { (*rel)->addr = addr; @@ -614,7 +620,7 @@ static inline void __resolve_relocs(struct reloc *rel, struct label *lab) } } -static __init void resolve_relocs(struct reloc *rel, struct label *lab) +static void __init resolve_relocs(struct reloc *rel, struct label *lab) { struct label *l; @@ -624,7 +630,7 @@ static __init void resolve_relocs(struct reloc *rel, struct label *lab) __resolve_relocs(rel, l); } -static __init void move_relocs(struct reloc *rel, u32 *first, u32 *end, +static void __init move_relocs(struct reloc *rel, u32 *first, u32 *end, long off) { for (; rel->lab != label_invalid; rel++) @@ -632,7 +638,7 @@ static __init void move_relocs(struct reloc *rel, u32 *first, u32 *end, rel->addr += off; } -static __init void move_labels(struct label *lab, u32 *first, u32 *end, +static void __init move_labels(struct label *lab, u32 *first, u32 *end, long off) { for (; lab->lab != label_invalid; lab++) @@ -640,7 +646,7 @@ static __init void move_labels(struct label *lab, u32 *first, u32 *end, lab->addr += off; } -static __init void copy_handler(struct reloc *rel, struct label *lab, +static void __init copy_handler(struct reloc *rel, struct label *lab, u32 *first, u32 *end, u32 *target) { long off = (long)(target - first); @@ -651,7 +657,7 @@ static __init void copy_handler(struct reloc *rel, struct label *lab, move_labels(lab, first, end, off); } -static __init int __maybe_unused insn_has_bdelay(struct reloc *rel, +static int __init __maybe_unused insn_has_bdelay(struct reloc *rel, u32 *addr) { for (; rel->lab != label_invalid; rel++) { @@ -714,6 +720,22 @@ il_bgez(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) i_bgez(p, reg, 0); } +/* + * For debug purposes. + */ +static inline void dump_handler(const u32 *handler, int count) +{ + int i; + + pr_debug("\t.set push\n"); + pr_debug("\t.set noreorder\n"); + + for (i = 0; i < count; i++) + pr_debug("\t%p\t.word 0x%08x\n", &handler[i], handler[i]); + + pr_debug("\t.set pop\n"); +} + /* The only general purpose registers allowed in TLB handlers. */ #define K0 26 #define K1 27 @@ -743,11 +765,11 @@ il_bgez(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) * We deliberately chose a buffer size of 128, so we won't scribble * over anything important on overflow before we panic. */ -static __initdata u32 tlb_handler[128]; +static u32 tlb_handler[128] __initdata; /* simply assume worst case size for labels and relocs */ -static __initdata struct label labels[128]; -static __initdata struct reloc relocs[128]; +static struct label labels[128] __initdata; +static struct reloc relocs[128] __initdata; /* * The R3000 TLB handler is simple. @@ -756,7 +778,6 @@ static void __init build_r3000_tlb_refill_handler(void) { long pgdc = (long)pgd_current; u32 *p; - int i; memset(tlb_handler, 0, sizeof(tlb_handler)); p = tlb_handler; @@ -785,13 +806,9 @@ static void __init build_r3000_tlb_refill_handler(void) pr_info("Synthesized TLB refill handler (%u instructions).\n", (unsigned int)(p - tlb_handler)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - tlb_handler); i++) - pr_debug("\t.word 0x%08x\n", tlb_handler[i]); - pr_debug("\t.set pop\n"); - memcpy((void *)ebase, tlb_handler, 0x80); + + dump_handler((u32 *)ebase, 32); } /* @@ -801,7 +818,7 @@ static void __init build_r3000_tlb_refill_handler(void) * other one.To keep things simple, we first assume linear space, * then we relocate it to the final handler layout as needed. */ -static __initdata u32 final_handler[64]; +static u32 final_handler[64] __initdata; /* * Hazards @@ -825,7 +842,7 @@ static __initdata u32 final_handler[64]; * * As if we MIPS hackers wouldn't know how to nop pipelines happy ... */ -static __init void __maybe_unused build_tlb_probe_entry(u32 **p) +static void __init __maybe_unused build_tlb_probe_entry(u32 **p) { switch (current_cpu_type()) { /* Found by experiment: R4600 v2.0 needs this, too. */ @@ -849,7 +866,7 @@ static __init void __maybe_unused build_tlb_probe_entry(u32 **p) */ enum tlb_write_entry { tlb_random, tlb_indexed }; -static __init void build_tlb_write_entry(u32 **p, struct label **l, +static void __init build_tlb_write_entry(u32 **p, struct label **l, struct reloc **r, enum tlb_write_entry wmode) { @@ -860,6 +877,12 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case tlb_indexed: tlbw = i_tlbwi; break; } + if (cpu_has_mips_r2) { + i_ehb(p); + tlbw(p); + return; + } + switch (current_cpu_type()) { case CPU_R4000PC: case CPU_R4000SC: @@ -894,6 +917,8 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_AU1500: case CPU_AU1550: case CPU_AU1200: + case CPU_AU1210: + case CPU_AU1250: case CPU_PR4450: i_nop(p); tlbw(p); @@ -935,14 +960,6 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, tlbw(p); break; - case CPU_4KEC: - case CPU_24K: - case CPU_34K: - case CPU_74K: - i_ehb(p); - tlbw(p); - break; - case CPU_RM9000: /* * When the JTLB is updated by tlbwi or tlbwr, a subsequent @@ -993,7 +1010,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, * TMP and PTR are scratch. * TMP will be clobbered, PTR will hold the pmd entry. */ -static __init void +static void __init build_get_pmde64(u32 **p, struct label **l, struct reloc **r, unsigned int tmp, unsigned int ptr) { @@ -1054,7 +1071,7 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, * BVADDR is the faulting address, PTR is scratch. * PTR will hold the pgd for vmalloc. */ -static __init void +static void __init build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r, unsigned int bvaddr, unsigned int ptr) { @@ -1087,7 +1104,10 @@ build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r, } else { i_LA_mostly(p, ptr, modd); il_b(p, r, label_vmalloc_done); - i_daddiu(p, ptr, ptr, rel_lo(modd)); + if (in_compat_space_p(modd)) + i_addiu(p, ptr, ptr, rel_lo(modd)); + else + i_daddiu(p, ptr, ptr, rel_lo(modd)); } l_vmalloc(l, *p); @@ -1108,7 +1128,10 @@ build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r, } else { i_LA_mostly(p, ptr, swpd); il_b(p, r, label_vmalloc_done); - i_daddiu(p, ptr, ptr, rel_lo(swpd)); + if (in_compat_space_p(swpd)) + i_addiu(p, ptr, ptr, rel_lo(swpd)); + else + i_daddiu(p, ptr, ptr, rel_lo(swpd)); } } @@ -1118,7 +1141,7 @@ build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r, * TMP and PTR are scratch. * TMP will be clobbered, PTR will hold the pgd entry. */ -static __init void __maybe_unused +static void __init __maybe_unused build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) { long pgdc = (long)pgd_current; @@ -1153,7 +1176,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) #endif /* !CONFIG_64BIT */ -static __init void build_adjust_context(u32 **p, unsigned int ctx) +static void __init build_adjust_context(u32 **p, unsigned int ctx) { unsigned int shift = 4 - (PTE_T_LOG2 + 1) + PAGE_SHIFT - 12; unsigned int mask = (PTRS_PER_PTE / 2 - 1) << (PTE_T_LOG2 + 1); @@ -1179,7 +1202,7 @@ static __init void build_adjust_context(u32 **p, unsigned int ctx) i_andi(p, ctx, ctx, mask); } -static __init void build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr) +static void __init build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr) { /* * Bug workaround for the Nevada. It seems as if under certain @@ -1204,7 +1227,7 @@ static __init void build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr) i_ADDU(p, ptr, ptr, tmp); /* add in offset */ } -static __init void build_update_entries(u32 **p, unsigned int tmp, +static void __init build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep) { /* @@ -1254,7 +1277,6 @@ static void __init build_r4000_tlb_refill_handler(void) struct reloc *r = relocs; u32 *f; unsigned int final_len; - int i; memset(tlb_handler, 0, sizeof(tlb_handler)); memset(labels, 0, sizeof(labels)); @@ -1356,20 +1378,9 @@ static void __init build_r4000_tlb_refill_handler(void) pr_info("Synthesized TLB refill handler (%u instructions).\n", final_len); - f = final_handler; -#if defined(CONFIG_64BIT) && !defined(CONFIG_CPU_LOONGSON2) - if (final_len > 32) - final_len = 64; - else - f = final_handler + 32; -#endif /* CONFIG_64BIT */ - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < final_len; i++) - pr_debug("\t.word 0x%08x\n", f[i]); - pr_debug("\t.set pop\n"); - memcpy((void *)ebase, final_handler, 0x100); + + dump_handler((u32 *)ebase, 64); } /* @@ -1381,18 +1392,15 @@ static void __init build_r4000_tlb_refill_handler(void) extern void tlb_do_page_fault_0(void); extern void tlb_do_page_fault_1(void); -#define __tlb_handler_align \ - __attribute__((__aligned__(1 << CONFIG_MIPS_L1_CACHE_SHIFT))) - /* * 128 instructions for the fastpath handler is generous and should * never be exceeded. */ #define FASTPATH_SIZE 128 -u32 __tlb_handler_align handle_tlbl[FASTPATH_SIZE]; -u32 __tlb_handler_align handle_tlbs[FASTPATH_SIZE]; -u32 __tlb_handler_align handle_tlbm[FASTPATH_SIZE]; +u32 handle_tlbl[FASTPATH_SIZE] __cacheline_aligned; +u32 handle_tlbs[FASTPATH_SIZE] __cacheline_aligned; +u32 handle_tlbm[FASTPATH_SIZE] __cacheline_aligned; static void __init iPTE_LW(u32 **p, struct label **l, unsigned int pte, unsigned int ptr) @@ -1600,7 +1608,6 @@ static void __init build_r3000_tlb_load_handler(void) u32 *p = handle_tlbl; struct label *l = labels; struct reloc *r = relocs; - int i; memset(handle_tlbl, 0, sizeof(handle_tlbl)); memset(labels, 0, sizeof(labels)); @@ -1623,11 +1630,7 @@ static void __init build_r3000_tlb_load_handler(void) pr_info("Synthesized TLB load handler fastpath (%u instructions).\n", (unsigned int)(p - handle_tlbl)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - handle_tlbl); i++) - pr_debug("\t.word 0x%08x\n", handle_tlbl[i]); - pr_debug("\t.set pop\n"); + dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl)); } static void __init build_r3000_tlb_store_handler(void) @@ -1635,7 +1638,6 @@ static void __init build_r3000_tlb_store_handler(void) u32 *p = handle_tlbs; struct label *l = labels; struct reloc *r = relocs; - int i; memset(handle_tlbs, 0, sizeof(handle_tlbs)); memset(labels, 0, sizeof(labels)); @@ -1658,11 +1660,7 @@ static void __init build_r3000_tlb_store_handler(void) pr_info("Synthesized TLB store handler fastpath (%u instructions).\n", (unsigned int)(p - handle_tlbs)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - handle_tlbs); i++) - pr_debug("\t.word 0x%08x\n", handle_tlbs[i]); - pr_debug("\t.set pop\n"); + dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs)); } static void __init build_r3000_tlb_modify_handler(void) @@ -1670,7 +1668,6 @@ static void __init build_r3000_tlb_modify_handler(void) u32 *p = handle_tlbm; struct label *l = labels; struct reloc *r = relocs; - int i; memset(handle_tlbm, 0, sizeof(handle_tlbm)); memset(labels, 0, sizeof(labels)); @@ -1693,11 +1690,7 @@ static void __init build_r3000_tlb_modify_handler(void) pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n", (unsigned int)(p - handle_tlbm)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - handle_tlbm); i++) - pr_debug("\t.word 0x%08x\n", handle_tlbm[i]); - pr_debug("\t.set pop\n"); + dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm)); } /* @@ -1750,7 +1743,6 @@ static void __init build_r4000_tlb_load_handler(void) u32 *p = handle_tlbl; struct label *l = labels; struct reloc *r = relocs; - int i; memset(handle_tlbl, 0, sizeof(handle_tlbl)); memset(labels, 0, sizeof(labels)); @@ -1783,11 +1775,7 @@ static void __init build_r4000_tlb_load_handler(void) pr_info("Synthesized TLB load handler fastpath (%u instructions).\n", (unsigned int)(p - handle_tlbl)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - handle_tlbl); i++) - pr_debug("\t.word 0x%08x\n", handle_tlbl[i]); - pr_debug("\t.set pop\n"); + dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl)); } static void __init build_r4000_tlb_store_handler(void) @@ -1795,7 +1783,6 @@ static void __init build_r4000_tlb_store_handler(void) u32 *p = handle_tlbs; struct label *l = labels; struct reloc *r = relocs; - int i; memset(handle_tlbs, 0, sizeof(handle_tlbs)); memset(labels, 0, sizeof(labels)); @@ -1819,11 +1806,7 @@ static void __init build_r4000_tlb_store_handler(void) pr_info("Synthesized TLB store handler fastpath (%u instructions).\n", (unsigned int)(p - handle_tlbs)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - handle_tlbs); i++) - pr_debug("\t.word 0x%08x\n", handle_tlbs[i]); - pr_debug("\t.set pop\n"); + dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs)); } static void __init build_r4000_tlb_modify_handler(void) @@ -1831,7 +1814,6 @@ static void __init build_r4000_tlb_modify_handler(void) u32 *p = handle_tlbm; struct label *l = labels; struct reloc *r = relocs; - int i; memset(handle_tlbm, 0, sizeof(handle_tlbm)); memset(labels, 0, sizeof(labels)); @@ -1856,11 +1838,7 @@ static void __init build_r4000_tlb_modify_handler(void) pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n", (unsigned int)(p - handle_tlbm)); - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); - for (i = 0; i < (p - handle_tlbm); i++) - pr_debug("\t.word 0x%08x\n", handle_tlbm[i]); - pr_debug("\t.set pop\n"); + dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm)); } void __init build_tlb_refill_handler(void) diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index bdfa07aecd9..ccbea229a0e 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -19,7 +19,7 @@ #define M_PERFCTL_SUPERVISOR (1UL << 2) #define M_PERFCTL_USER (1UL << 3) #define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4) -#define M_PERFCTL_EVENT(event) (((event) & 0x3f) << 5) +#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5) #define M_PERFCTL_VPEID(vpe) ((vpe) << 16) #define M_PERFCTL_MT_EN(filter) ((filter) << 20) #define M_TC_EN_ALL M_PERFCTL_MT_EN(0) diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 47f316c86ab..30ed36125bc 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -178,8 +178,8 @@ struct pci_ops bcm1480_pci_ops = { static struct resource bcm1480_mem_resource = { .name = "BCM1480 PCI MEM", - .start = 0x30000000UL, - .end = 0x3fffffffUL, + .start = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, + .end = A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES + 0xfffffffUL, .flags = IORESOURCE_MEM, }; diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index a63e3bd6b0a..005e7fecab0 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -173,8 +173,8 @@ struct pci_ops bcm1480ht_pci_ops = { static struct resource bcm1480ht_mem_resource = { .name = "BCM1480 HT MEM", - .start = 0x40000000UL, - .end = 0x5fffffffUL, + .start = A_BCM1480_PHYS_HT_MEM_MATCH_BYTES, + .end = A_BCM1480_PHYS_HT_MEM_MATCH_BYTES + 0x1fffffffUL, .flags = IORESOURCE_MEM, }; diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c index 2ce298f4d19..92d764c9770 100644 --- a/arch/mips/philips/pnx8550/common/setup.c +++ b/arch/mips/philips/pnx8550/common/setup.c @@ -74,7 +74,7 @@ struct resource standard_io_resources[] = { }, }; -#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource)) +#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) extern struct resource pci_io_resource; extern struct resource pci_mem_resource; diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c index 6d494e0de3d..62f495b57f9 100644 --- a/arch/mips/philips/pnx8550/common/time.c +++ b/arch/mips/philips/pnx8550/common/time.c @@ -47,11 +47,6 @@ static struct clocksource pnx_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void timer_ack(void) -{ - write_c0_compare(cpj); -} - static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *c = dev_id; @@ -94,30 +89,22 @@ static struct clock_event_device pnx8xxx_clockevent = { .set_next_event = pnx8xxx_set_next_event, }; -/* - * plat_time_init() - it does the following things: - * - * 1) plat_time_init() - - * a) (optional) set up RTC routines, - * b) (optional) calibrate and set the mips_hpt_frequency - * (only needed if you intended to use cpu counter as timer interrupt - * source) - */ +static inline void timer_ack(void) +{ + write_c0_compare(cpj); +} __init void plat_time_init(void) { - unsigned int configPR; - unsigned int n; - unsigned int m; - unsigned int p; - unsigned int pow2p; + unsigned int configPR; + unsigned int n; + unsigned int m; + unsigned int p; + unsigned int pow2p; clockevents_register_device(&pnx8xxx_clockevent); clocksource_register(&pnx_clocksource); - setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); - setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); - /* Timer 1 start */ configPR = read_c0_config7(); configPR &= ~0x00000008; @@ -158,6 +145,6 @@ __init void plat_time_init(void) write_c0_count2(0); write_c0_compare2(0xffffffff); + setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); + setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); } - - diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c index cfd90fa3d79..90b4d35f3ec 100644 --- a/arch/mips/philips/pnx8550/jbs/init.c +++ b/arch/mips/philips/pnx8550/jbs/init.c @@ -45,11 +45,8 @@ const char *get_system_type(void) void __init prom_init(void) { - unsigned long memsize; - mips_machtype = MACH_PHILIPS_JBS; - //memsize = 0x02800000; /* Trimedia uses memory above */ memsize = 0x08000000; /* Trimedia uses memory above */ add_memory_region(0, memsize, BOOT_MEM_RAM); diff --git a/arch/mips/philips/pnx8550/stb810/prom_init.c b/arch/mips/philips/pnx8550/stb810/prom_init.c index fdb33ed089b..832dd60b0a7 100644 --- a/arch/mips/philips/pnx8550/stb810/prom_init.c +++ b/arch/mips/philips/pnx8550/stb810/prom_init.c @@ -41,8 +41,6 @@ void __init prom_init(void) prom_init_cmdline(); - mips_machtype = MACH_PHILIPS_STB810; - memsize = 0x08000000; /* Trimedia uses memory above */ add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h deleted file mode 100644 index 31c5523276f..00000000000 --- a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/mips/pmc-sierra/yosemite/i2c-yosemite.h - * - * Copyright (C) 2003 PMC-Sierra Inc. - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __I2C_YOSEMITE_H -#define __I2C_YOSEMITE_H - -/* Read and Write operations to the chip */ - -#define TITAN_I2C_BASE 0xbb000000 /* XXX Needs to change */ - -#define TITAN_I2C_WRITE(offset, data) \ - *(volatile unsigned long *)(TITAN_I2C_BASE + offset) = data - -#define TITAN_I2C_READ(offset) *(volatile unsigned long *)(TITAN_I2C_BASE + offset) - - -/* Local constansts*/ -#define TITAN_I2C_MAX_FILTER 15 -#define TITAN_I2C_MAX_CLK 1023 -#define TITAN_I2C_MAX_ARBF 15 -#define TITAN_I2C_MAX_NAK 15 -#define TITAN_I2C_MAX_MASTERCODE 7 -#define TITAN_I2C_MAX_WORDS_PER_RW 4 -#define TITAN_I2C_MAX_POLL 100 - -/* Registers used for I2C work */ -#define TITAN_I2C_SCMB_CONTROL 0x0180 /* SCMB Control */ -#define TITAN_I2C_SCMB_CLOCK_A 0x0184 /* SCMB Clock A */ -#define TITAN_I2C_SCMB_CLOCK_B 0x0188 /* SCMB Clock B */ -#define TITAN_I2C_CONFIG 0x01A0 /* I2C Config */ -#define TITAN_I2C_COMMAND 0x01A4 /* I2C Command */ -#define TITAN_I2C_SLAVE_ADDRESS 0x01A8 /* I2C Slave Address */ -#define TITAN_I2C_DATA 0x01AC /* I2C Data [15:0] */ -#define TITAN_I2C_INTERRUPTS 0x01BC /* I2C Interrupts */ - -/* Error */ -#define TITAN_I2C_ERR_ARB_LOST (-9220) -#define TITAN_I2C_ERR_NO_RESP (-9221) -#define TITAN_I2C_ERR_DATA_COLLISION (-9222) -#define TITAN_I2C_ERR_TIMEOUT (-9223) -#define TITAN_I2C_ERR_OK 0 - -/* I2C Command Type */ -typedef enum { - TITAN_I2C_CMD_WRITE = 0, - TITAN_I2C_CMD_READ = 1, - TITAN_I2C_CMD_READ_WRITE = 2 -} titan_i2c_cmd_type; - -/* I2C structures */ -typedef struct { - int filtera; /* Register 0x0184, bits 15 - 12 */ - int clka; /* Register 0x0184, bits 9 - 0 */ - int filterb; /* Register 0x0188, bits 15 - 12 */ - int clkb; /* Register 0x0188, bits 9 - 0 */ -} titan_i2c_config; - -/* I2C command type */ -typedef struct { - titan_i2c_cmd_type type; /* Type of command */ - int num_arb; /* Register 0x01a0, bits 15 - 12 */ - int num_nak; /* Register 0x01a0, bits 11 - 8 */ - int addr_size; /* Register 0x01a0, bit 7 */ - int mst_code; /* Register 0x01a0, bits 6 - 4 */ - int arb_en; /* Register 0x01a0, bit 1 */ - int speed; /* Register 0x01a0, bit 0 */ - int slave_addr; /* Register 0x01a8 */ - int write_size; /* Register 0x01a4, bits 10 - 8 */ - unsigned int *data; /* Register 0x01ac */ -} titan_i2c_command; - -#endif /* __I2C_YOSEMITE_H */ diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c index 9b9936de658..35dc435846a 100644 --- a/arch/mips/pmc-sierra/yosemite/prom.c +++ b/arch/mips/pmc-sierra/yosemite/prom.c @@ -19,6 +19,7 @@ #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/reboot.h> +#include <asm/smp-ops.h> #include <asm/system.h> #include <asm/bootinfo.h> #include <asm/pmon.h> @@ -78,6 +79,8 @@ static void prom_halt(void) __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); } +extern struct plat_smp_ops yos_smp_ops; + /* * Init routine which accepts the variables from PMON */ @@ -126,9 +129,9 @@ void __init prom_init(void) env++; } - mips_machtype = MACH_TITAN_YOSEMITE; - prom_grab_secondary(); + + register_smp_ops(&yos_smp_ops); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index b0f12cd2968..653f3ec61ca 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -42,70 +42,6 @@ void __init prom_grab_secondary(void) launchstack + LAUNCHSTACK_SIZE, 0); } -/* - * Detect available CPUs, populate phys_cpu_present_map before smp_init - * - * We don't want to start the secondary CPU yet nor do we have a nice probing - * feature in PMON so we just assume presence of the secondary core. - */ -void __init plat_smp_setup(void) -{ - int i; - - cpus_clear(phys_cpu_present_map); - - for (i = 0; i < 2; i++) { - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = i; - __cpu_logical_map[i] = i; - } -} - -void __init plat_prepare_cpus(unsigned int max_cpus) -{ - /* - * Be paranoid. Enable the IPI only if we're really about to go SMP. - */ - if (cpus_weight(cpu_possible_map)) - set_c0_status(STATUSF_IP5); -} - -/* - * Firmware CPU startup hook - * Complicated by PMON's weird interface which tries to minimic the UNIX fork. - * It launches the next * available CPU and copies some information on the - * stack so the first thing we do is throw away that stuff and load useful - * values into the registers ... - */ -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) -{ - unsigned long gp = (unsigned long) task_thread_info(idle); - unsigned long sp = __KSTK_TOS(idle); - - secondary_sp = sp; - secondary_gp = gp; - - spin_unlock(&launch_lock); -} - -/* Hook for after all CPUs are online */ -void prom_cpus_done(void) -{ -} - -/* - * After we've done initial boot, this function is called to allow the - * board code to clean up state, if needed - */ -void __cpuinit prom_init_secondary(void) -{ - set_c0_status(ST0_CO | ST0_IE | ST0_IM); -} - -void __cpuinit prom_smp_finish(void) -{ -} - void titan_mailbox_irq(void) { int cpu = smp_processor_id(); @@ -133,7 +69,7 @@ void titan_mailbox_irq(void) /* * Send inter-processor interrupt */ -void core_send_ipi(int cpu, unsigned int action) +static void yos_send_ipi_single(int cpu, unsigned int action) { /* * Generate an INTMSG so that it can be sent over to the @@ -159,3 +95,86 @@ void core_send_ipi(int cpu, unsigned int action) break; } } + +static void yos_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + yos_send_ipi_single(i, action); +} + +/* + * After we've done initial boot, this function is called to allow the + * board code to clean up state, if needed + */ +static void __cpuinit yos_init_secondary(void) +{ + set_c0_status(ST0_CO | ST0_IE | ST0_IM); +} + +static void __cpuinit yos_smp_finish(void) +{ +} + +/* Hook for after all CPUs are online */ +static void yos_cpus_done(void) +{ +} + +/* + * Firmware CPU startup hook + * Complicated by PMON's weird interface which tries to minimic the UNIX fork. + * It launches the next * available CPU and copies some information on the + * stack so the first thing we do is throw away that stuff and load useful + * values into the registers ... + */ +static void __cpuinit yos_boot_secondary(int cpu, struct task_struct *idle) +{ + unsigned long gp = (unsigned long) task_thread_info(idle); + unsigned long sp = __KSTK_TOS(idle); + + secondary_sp = sp; + secondary_gp = gp; + + spin_unlock(&launch_lock); +} + +/* + * Detect available CPUs, populate phys_cpu_present_map before smp_init + * + * We don't want to start the secondary CPU yet nor do we have a nice probing + * feature in PMON so we just assume presence of the secondary core. + */ +static void __init yos_smp_setup(void) +{ + int i; + + cpus_clear(phys_cpu_present_map); + + for (i = 0; i < 2; i++) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = i; + __cpu_logical_map[i] = i; + } +} + +static void __init yos_prepare_cpus(unsigned int max_cpus) +{ + /* + * Be paranoid. Enable the IPI only if we're really about to go SMP. + */ + if (cpus_weight(cpu_possible_map)) + set_c0_status(STATUSF_IP5); +} + +struct plat_smp_ops yos_smp_ops = { + .send_ipi_single = yos_send_ipi_single, + .send_ipi_mask = yos_send_ipi_mask, + .init_secondary = yos_init_secondary, + .smp_finish = yos_smp_finish, + .cpus_done = yos_cpus_done, + .boot_secondary = yos_boot_secondary, + .smp_setup = yos_smp_setup, + .prepare_cpus = yos_prepare_cpus, +}; diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile deleted file mode 100644 index 2ba4ef34b4a..00000000000 --- a/arch/mips/qemu/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for Qemu specific kernel interface routines under Linux. -# - -obj-y = q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o - -obj-$(CONFIG_EARLY_PRINTK) += q-console.o -obj-$(CONFIG_SMP) += q-smp.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/qemu/q-console.c b/arch/mips/qemu/q-console.c deleted file mode 100644 index 81101ae5017..00000000000 --- a/arch/mips/qemu/q-console.c +++ /dev/null @@ -1,26 +0,0 @@ -#include <linux/console.h> -#include <linux/init.h> -#include <linux/serial_reg.h> -#include <asm/io.h> - -#define PORT(offset) (0x3f8 + (offset)) - -static inline unsigned int serial_in(int offset) -{ - return inb(PORT(offset)); -} - -static inline void serial_out(int offset, int value) -{ - outb(value, PORT(offset)); -} - -int prom_putchar(char c) -{ - while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(UART_TX, c); - - return 1; -} diff --git a/arch/mips/qemu/q-firmware.c b/arch/mips/qemu/q-firmware.c deleted file mode 100644 index 3ed43f416cd..00000000000 --- a/arch/mips/qemu/q-firmware.c +++ /dev/null @@ -1,24 +0,0 @@ -#include <linux/init.h> -#include <linux/string.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/io.h> - -#define QEMU_PORT_BASE 0xb4000000 - -void __init prom_init(void) -{ - int *cmdline; - - cmdline = (int *) (CKSEG0 + (0x10 << 20) - 260); - if (*cmdline == 0x12345678) { - if (*(char *)(cmdline + 1)) - strcpy(arcs_cmdline, (char *)(cmdline + 1)); - add_memory_region(0x0<<20, cmdline[-1], BOOT_MEM_RAM); - } else { - add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM); - } - - - set_io_port_base(QEMU_PORT_BASE); -} diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c deleted file mode 100644 index 7df36dbe65c..00000000000 --- a/arch/mips/qemu/q-irq.c +++ /dev/null @@ -1,37 +0,0 @@ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/linkage.h> - -#include <asm/i8259.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/qemu.h> -#include <asm/system.h> -#include <asm/time.h> - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & 0x8000) { - do_IRQ(Q_COUNT_COMPARE_IRQ); - return; - } - if (pending & 0x0400) { - int irq = i8259_irq(); - - if (likely(irq >= 0)) - do_IRQ(irq); - - return; - } -} - -void __init arch_init_irq(void) -{ - mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */ - - mips_cpu_irq_init(); - init_i8259_irqs(); - set_c0_status(0x400); -} diff --git a/arch/mips/qemu/q-mem.c b/arch/mips/qemu/q-mem.c deleted file mode 100644 index dae39b59de1..00000000000 --- a/arch/mips/qemu/q-mem.c +++ /dev/null @@ -1,5 +0,0 @@ -#include <linux/init.h> - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/qemu/q-reset.c b/arch/mips/qemu/q-reset.c deleted file mode 100644 index dbbe44ad7e8..00000000000 --- a/arch/mips/qemu/q-reset.c +++ /dev/null @@ -1,33 +0,0 @@ - -#include <asm/io.h> -#include <asm/reboot.h> -#include <asm/cacheflush.h> -#include <asm/qemu.h> - -static void qemu_machine_restart(char *command) -{ - volatile unsigned int *reg = (unsigned int *)QEMU_RESTART_REG; - - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - *reg = 42; - while (1) - cpu_wait(); -} - -static void qemu_machine_halt(void) -{ - volatile unsigned int *reg = (unsigned int *)QEMU_HALT_REG; - - *reg = 42; - while (1) - cpu_wait(); -} - -void qemu_reboot_setup(void) -{ - _machine_restart = qemu_machine_restart; - _machine_halt = qemu_machine_halt; -} diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c deleted file mode 100644 index 969cedc8d8b..00000000000 --- a/arch/mips/qemu/q-setup.c +++ /dev/null @@ -1,22 +0,0 @@ -#include <linux/init.h> - -#include <asm/i8253.h> -#include <asm/io.h> -#include <asm/time.h> - -extern void qemu_reboot_setup(void); - -const char *get_system_type(void) -{ - return "Qemu"; -} - -void __init plat_time_init(void) -{ - setup_pit_timer(); -} - -void __init plat_mem_setup(void) -{ - qemu_reboot_setup(); -} diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c deleted file mode 100644 index 4b0178d0df0..00000000000 --- a/arch/mips/qemu/q-smp.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org) - * - * Symmetric Uniprocessor (TM) Support - */ -#include <linux/kernel.h> -#include <linux/sched.h> - -/* - * Send inter-processor interrupt - */ -void core_send_ipi(int cpu, unsigned int action) -{ - panic(KERN_ERR "%s called", __FUNCTION__); -} - -/* - * After we've done initial boot, this function is called to allow the - * board code to clean up state, if needed - */ -void __cpuinit prom_init_secondary(void) -{ -} - -void __cpuinit prom_smp_finish(void) -{ -} - -/* Hook for after all CPUs are online */ -void prom_cpus_done(void) -{ -} - -void __init prom_prepare_cpus(unsigned int max_cpus) -{ - cpus_clear(phys_cpu_present_map); -} - -/* - * Firmware CPU startup hook - */ -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) -{ -} - -void __init plat_smp_setup(void) -{ -} -void __init plat_prepare_cpus(unsigned int max_cpus) -{ -} diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile index e3acb51b70b..ef1564e40c8 100644 --- a/arch/mips/sgi-ip22/Makefile +++ b/arch/mips/sgi-ip22/Makefile @@ -3,9 +3,11 @@ # under Linux. # -obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \ - ip22-time.o ip22-nvram.o ip22-platform.o ip22-reset.o ip22-setup.o +obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-time.o ip22-nvram.o \ + ip22-platform.o ip22-reset.o ip22-setup.o +obj-$(CONFIG_SGI_IP22) += ip22-berr.o +obj-$(CONFIG_SGI_IP28) += ip28-berr.o obj-$(CONFIG_EISA) += ip22-eisa.o -EXTRA_CFLAGS += -Werror +# EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index 01a805dcc67..3f35d6367be 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -4,6 +4,7 @@ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - Indigo2 changes * Copyright (C) 2003 Ladislav Michl (ladis@linux-mips.org) + * Copyright (C) 2004 Peter Fuerst (pf@net.alphadv.de) - IP28 */ #include <linux/init.h> @@ -137,9 +138,12 @@ void __init sgimc_init(void) /* Step 2: Enable all parity checking in cpu control register * zero. */ + /* don't touch parity settings for IP28 */ +#ifndef CONFIG_SGI_IP28 tmp = sgimc->cpuctrl0; tmp |= (SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM | SGIMC_CCTRL0_R4KNOCHKPARR); +#endif sgimc->cpuctrl0 = tmp; /* Step 3: Setup the MC write buffer depth, this is controlled diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c new file mode 100644 index 00000000000..30e12e2ec4b --- /dev/null +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -0,0 +1,502 @@ +/* + * ip28-berr.c: Bus error handling. + * + * Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org) + * Copyright (C) 2005 Peter Fuerst (pf@net.alphadv.de) - IP28 + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/seq_file.h> + +#include <asm/addrspace.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/branch.h> +#include <asm/irq_regs.h> +#include <asm/sgi/mc.h> +#include <asm/sgi/hpc3.h> +#include <asm/sgi/ioc.h> +#include <asm/sgi/ip22.h> +#include <asm/r4kcache.h> +#include <asm/uaccess.h> +#include <asm/bootinfo.h> + +static unsigned int count_be_is_fixup; +static unsigned int count_be_handler; +static unsigned int count_be_interrupt; +static int debug_be_interrupt; + +static unsigned int cpu_err_stat; /* Status reg for CPU */ +static unsigned int gio_err_stat; /* Status reg for GIO */ +static unsigned int cpu_err_addr; /* Error address reg for CPU */ +static unsigned int gio_err_addr; /* Error address reg for GIO */ +static unsigned int extio_stat; +static unsigned int hpc3_berr_stat; /* Bus error interrupt status */ + +struct hpc3_stat { + unsigned long addr; + unsigned int ctrl; + unsigned int cbp; + unsigned int ndptr; +}; + +static struct { + struct hpc3_stat pbdma[8]; + struct hpc3_stat scsi[2]; + struct hpc3_stat ethrx, ethtx; +} hpc3; + +static struct { + unsigned long err_addr; + struct { + u32 lo; + u32 hi; + } tags[1][2], tagd[4][2], tagi[4][2]; /* Way 0/1 */ +} cache_tags; + +static inline void save_cache_tags(unsigned busaddr) +{ + unsigned long addr = CAC_BASE | busaddr; + int i; + cache_tags.err_addr = addr; + + /* + * Starting with a bus-address, save secondary cache (indexed by + * PA[23..18:7..6]) tags first. + */ + addr &= ~1L; +#define tag cache_tags.tags[0] + cache_op(Index_Load_Tag_S, addr); + tag[0].lo = read_c0_taglo(); /* PA[35:18], VA[13:12] */ + tag[0].hi = read_c0_taghi(); /* PA[39:36] */ + cache_op(Index_Load_Tag_S, addr | 1L); + tag[1].lo = read_c0_taglo(); /* PA[35:18], VA[13:12] */ + tag[1].hi = read_c0_taghi(); /* PA[39:36] */ +#undef tag + + /* + * Save all primary data cache (indexed by VA[13:5]) tags which + * might fit to this bus-address, knowing that VA[11:0] == PA[11:0]. + * Saving all tags and evaluating them later is easier and safer + * than relying on VA[13:12] from the secondary cache tags to pick + * matching primary tags here already. + */ + addr &= (0xffL << 56) | ((1 << 12) - 1); +#define tag cache_tags.tagd[i] + for (i = 0; i < 4; ++i, addr += (1 << 12)) { + cache_op(Index_Load_Tag_D, addr); + tag[0].lo = read_c0_taglo(); /* PA[35:12] */ + tag[0].hi = read_c0_taghi(); /* PA[39:36] */ + cache_op(Index_Load_Tag_D, addr | 1L); + tag[1].lo = read_c0_taglo(); /* PA[35:12] */ + tag[1].hi = read_c0_taghi(); /* PA[39:36] */ + } +#undef tag + + /* + * Save primary instruction cache (indexed by VA[13:6]) tags + * the same way. + */ + addr &= (0xffL << 56) | ((1 << 12) - 1); +#define tag cache_tags.tagi[i] + for (i = 0; i < 4; ++i, addr += (1 << 12)) { + cache_op(Index_Load_Tag_I, addr); + tag[0].lo = read_c0_taglo(); /* PA[35:12] */ + tag[0].hi = read_c0_taghi(); /* PA[39:36] */ + cache_op(Index_Load_Tag_I, addr | 1L); + tag[1].lo = read_c0_taglo(); /* PA[35:12] */ + tag[1].hi = read_c0_taghi(); /* PA[39:36] */ + } +#undef tag +} + +#define GIO_ERRMASK 0xff00 +#define CPU_ERRMASK 0x3f00 + +static void save_and_clear_buserr(void) +{ + int i; + + /* save status registers */ + cpu_err_addr = sgimc->cerr; + cpu_err_stat = sgimc->cstat; + gio_err_addr = sgimc->gerr; + gio_err_stat = sgimc->gstat; + extio_stat = sgioc->extio; + hpc3_berr_stat = hpc3c0->bestat; + + hpc3.scsi[0].addr = (unsigned long)&hpc3c0->scsi_chan0; + hpc3.scsi[0].ctrl = hpc3c0->scsi_chan0.ctrl; /* HPC3_SCTRL_ACTIVE ? */ + hpc3.scsi[0].cbp = hpc3c0->scsi_chan0.cbptr; + hpc3.scsi[0].ndptr = hpc3c0->scsi_chan0.ndptr; + + hpc3.scsi[1].addr = (unsigned long)&hpc3c0->scsi_chan1; + hpc3.scsi[1].ctrl = hpc3c0->scsi_chan1.ctrl; /* HPC3_SCTRL_ACTIVE ? */ + hpc3.scsi[1].cbp = hpc3c0->scsi_chan1.cbptr; + hpc3.scsi[1].ndptr = hpc3c0->scsi_chan1.ndptr; + + hpc3.ethrx.addr = (unsigned long)&hpc3c0->ethregs.rx_cbptr; + hpc3.ethrx.ctrl = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */ + hpc3.ethrx.cbp = hpc3c0->ethregs.rx_cbptr; + hpc3.ethrx.ndptr = hpc3c0->ethregs.rx_ndptr; + + hpc3.ethtx.addr = (unsigned long)&hpc3c0->ethregs.tx_cbptr; + hpc3.ethtx.ctrl = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */ + hpc3.ethtx.cbp = hpc3c0->ethregs.tx_cbptr; + hpc3.ethtx.ndptr = hpc3c0->ethregs.tx_ndptr; + + for (i = 0; i < 8; ++i) { + /* HPC3_PDMACTRL_ISACT ? */ + hpc3.pbdma[i].addr = (unsigned long)&hpc3c0->pbdma[i]; + hpc3.pbdma[i].ctrl = hpc3c0->pbdma[i].pbdma_ctrl; + hpc3.pbdma[i].cbp = hpc3c0->pbdma[i].pbdma_bptr; + hpc3.pbdma[i].ndptr = hpc3c0->pbdma[i].pbdma_dptr; + } + i = 0; + if (gio_err_stat & CPU_ERRMASK) + i = gio_err_addr; + if (cpu_err_stat & CPU_ERRMASK) + i = cpu_err_addr; + save_cache_tags(i); + + sgimc->cstat = sgimc->gstat = 0; +} + +static void print_cache_tags(void) +{ + u32 scb, scw; + int i; + + printk(KERN_ERR "Cache tags @ %08x:\n", (unsigned)cache_tags.err_addr); + + /* PA[31:12] shifted to PTag0 (PA[35:12]) format */ + scw = (cache_tags.err_addr >> 4) & 0x0fffff00; + + scb = cache_tags.err_addr & ((1 << 12) - 1) & ~((1 << 5) - 1); + for (i = 0; i < 4; ++i) { /* for each possible VA[13:12] value */ + if ((cache_tags.tagd[i][0].lo & 0x0fffff00) != scw && + (cache_tags.tagd[i][1].lo & 0x0fffff00) != scw) + continue; + printk(KERN_ERR + "D: 0: %08x %08x, 1: %08x %08x (VA[13:5] %04x)\n", + cache_tags.tagd[i][0].hi, cache_tags.tagd[i][0].lo, + cache_tags.tagd[i][1].hi, cache_tags.tagd[i][1].lo, + scb | (1 << 12)*i); + } + scb = cache_tags.err_addr & ((1 << 12) - 1) & ~((1 << 6) - 1); + for (i = 0; i < 4; ++i) { /* for each possible VA[13:12] value */ + if ((cache_tags.tagi[i][0].lo & 0x0fffff00) != scw && + (cache_tags.tagi[i][1].lo & 0x0fffff00) != scw) + continue; + printk(KERN_ERR + "I: 0: %08x %08x, 1: %08x %08x (VA[13:6] %04x)\n", + cache_tags.tagi[i][0].hi, cache_tags.tagi[i][0].lo, + cache_tags.tagi[i][1].hi, cache_tags.tagi[i][1].lo, + scb | (1 << 12)*i); + } + i = read_c0_config(); + scb = i & (1 << 13) ? 7:6; /* scblksize = 2^[7..6] */ + scw = ((i >> 16) & 7) + 19 - 1; /* scwaysize = 2^[24..19] / 2 */ + + i = ((1 << scw) - 1) & ~((1 << scb) - 1); + printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n", + cache_tags.tags[0][0].hi, cache_tags.tags[0][0].lo, + cache_tags.tags[0][1].hi, cache_tags.tags[0][1].lo, + scw-1, scb, i & (unsigned)cache_tags.err_addr); +} + +static inline const char *cause_excode_text(int cause) +{ + static const char *txt[32] = + { "Interrupt", + "TLB modification", + "TLB (load or instruction fetch)", + "TLB (store)", + "Address error (load or instruction fetch)", + "Address error (store)", + "Bus error (instruction fetch)", + "Bus error (data: load or store)", + "Syscall", + "Breakpoint", + "Reserved instruction", + "Coprocessor unusable", + "Arithmetic Overflow", + "Trap", + "14", + "Floating-Point", + "16", "17", "18", "19", "20", "21", "22", + "Watch Hi/Lo", + "24", "25", "26", "27", "28", "29", "30", "31", + }; + return txt[(cause & 0x7c) >> 2]; +} + +static void print_buserr(const struct pt_regs *regs) +{ + const int field = 2 * sizeof(unsigned long); + int error = 0; + + if (extio_stat & EXTIO_MC_BUSERR) { + printk(KERN_ERR "MC Bus Error\n"); + error |= 1; + } + if (extio_stat & EXTIO_HPC3_BUSERR) { + printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n", + hpc3_berr_stat, + (hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >> + HPC3_BESTAT_PIDSHIFT, + (hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA", + hpc3_berr_stat & HPC3_BESTAT_BLMASK); + error |= 2; + } + if (extio_stat & EXTIO_EISA_BUSERR) { + printk(KERN_ERR "EISA Bus Error\n"); + error |= 4; + } + if (cpu_err_stat & CPU_ERRMASK) { + printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n", + cpu_err_stat, + cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "", + cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "", + cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "", + cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "", + cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "", + cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "", + cpu_err_addr); + error |= 8; + } + if (gio_err_stat & GIO_ERRMASK) { + printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n", + gio_err_stat, + gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "", + gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "", + gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "", + gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "", + gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "", + gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "", + gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "", + gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "", + gio_err_addr); + error |= 16; + } + if (!error) + printk(KERN_ERR "MC: Hmm, didn't find any error condition.\n"); + else { + printk(KERN_ERR "CP0: config %08x, " + "MC: cpuctrl0/1: %08x/%05x, giopar: %04x\n" + "MC: cpu/gio_memacc: %08x/%05x, memcfg0/1: %08x/%08x\n", + read_c0_config(), + sgimc->cpuctrl0, sgimc->cpuctrl0, sgimc->giopar, + sgimc->cmacc, sgimc->gmacc, + sgimc->mconfig0, sgimc->mconfig1); + print_cache_tags(); + } + printk(KERN_ALERT "%s, epc == %0*lx, ra == %0*lx\n", + cause_excode_text(regs->cp0_cause), + field, regs->cp0_epc, field, regs->regs[31]); +} + +/* + * Check, whether MC's (virtual) DMA address caused the bus error. + * See "Virtual DMA Specification", Draft 1.5, Feb 13 1992, SGI + */ + +static int addr_is_ram(unsigned long addr, unsigned sz) +{ + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long a = boot_mem_map.map[i].addr; + if (a <= addr && addr+sz <= a+boot_mem_map.map[i].size) + return 1; + } + return 0; +} + +static int check_microtlb(u32 hi, u32 lo, unsigned long vaddr) +{ + /* This is likely rather similar to correct code ;-) */ + + vaddr &= 0x7fffffff; /* Doc. states that top bit is ignored */ + + /* If tlb-entry is valid and VPN-high (bits [30:21] ?) matches... */ + if ((lo & 2) && (vaddr >> 21) == ((hi<<1) >> 22)) { + u32 ctl = sgimc->dma_ctrl; + if (ctl & 1) { + unsigned int pgsz = (ctl & 2) ? 14:12; /* 16k:4k */ + /* PTEIndex is VPN-low (bits [22:14]/[20:12] ?) */ + unsigned long pte = (lo >> 6) << 12; /* PTEBase */ + pte += 8*((vaddr >> pgsz) & 0x1ff); + if (addr_is_ram(pte, 8)) { + /* + * Note: Since DMA hardware does look up + * translation on its own, this PTE *must* + * match the TLB/EntryLo-register format ! + */ + unsigned long a = *(unsigned long *) + PHYS_TO_XKSEG_UNCACHED(pte); + a = (a & 0x3f) << 6; /* PFN */ + a += vaddr & ((1 << pgsz) - 1); + return (cpu_err_addr == a); + } + } + } + return 0; +} + +static int check_vdma_memaddr(void) +{ + if (cpu_err_stat & CPU_ERRMASK) { + u32 a = sgimc->maddronly; + + if (!(sgimc->dma_ctrl & 0x100)) /* Xlate-bit clear ? */ + return (cpu_err_addr == a); + + if (check_microtlb(sgimc->dtlb_hi0, sgimc->dtlb_lo0, a) || + check_microtlb(sgimc->dtlb_hi1, sgimc->dtlb_lo1, a) || + check_microtlb(sgimc->dtlb_hi2, sgimc->dtlb_lo2, a) || + check_microtlb(sgimc->dtlb_hi3, sgimc->dtlb_lo3, a)) + return 1; + } + return 0; +} + +static int check_vdma_gioaddr(void) +{ + if (gio_err_stat & GIO_ERRMASK) { + u32 a = sgimc->gio_dma_trans; + a = (sgimc->gmaddronly & ~a) | (sgimc->gio_dma_sbits & a); + return (gio_err_addr == a); + } + return 0; +} + +/* + * MC sends an interrupt whenever bus or parity errors occur. In addition, + * if the error happened during a CPU read, it also asserts the bus error + * pin on the R4K. Code in bus error handler save the MC bus error registers + * and then clear the interrupt when this happens. + */ + +static int ip28_be_interrupt(const struct pt_regs *regs) +{ + int i; + + save_and_clear_buserr(); + /* + * Try to find out, whether we got here by a mispredicted speculative + * load/store operation. If so, it's not fatal, we can go on. + */ + /* Any cause other than "Interrupt" (ExcCode 0) is fatal. */ + if (regs->cp0_cause & CAUSEF_EXCCODE) + goto mips_be_fatal; + + /* Any cause other than "Bus error interrupt" (IP6) is weird. */ + if ((regs->cp0_cause & CAUSEF_IP6) != CAUSEF_IP6) + goto mips_be_fatal; + + if (extio_stat & (EXTIO_HPC3_BUSERR | EXTIO_EISA_BUSERR)) + goto mips_be_fatal; + + /* Any state other than "Memory bus error" is fatal. */ + if (cpu_err_stat & CPU_ERRMASK & ~SGIMC_CSTAT_ADDR) + goto mips_be_fatal; + + /* GIO errors other than timeouts are fatal */ + if (gio_err_stat & GIO_ERRMASK & ~SGIMC_GSTAT_TIME) + goto mips_be_fatal; + + /* + * Now we have an asynchronous bus error, speculatively or DMA caused. + * Need to search all DMA descriptors for the error address. + */ + for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) { + struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i; + if ((cpu_err_stat & CPU_ERRMASK) && + (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp)) + break; + if ((gio_err_stat & GIO_ERRMASK) && + (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp)) + break; + } + if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) { + struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i; + printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:" + " ctl %08x, ndp %08x, cbp %08x\n", + CPHYSADDR(hp->addr), hp->ctrl, hp->ndptr, hp->cbp); + goto mips_be_fatal; + } + /* Check MC's virtual DMA stuff. */ + if (check_vdma_memaddr()) { + printk(KERN_ERR "at GIO DMA: mem address 0x%08x.\n", + sgimc->maddronly); + goto mips_be_fatal; + } + if (check_vdma_gioaddr()) { + printk(KERN_ERR "at GIO DMA: gio address 0x%08x.\n", + sgimc->gmaddronly); + goto mips_be_fatal; + } + /* A speculative bus error... */ + if (debug_be_interrupt) { + print_buserr(regs); + printk(KERN_ERR "discarded!\n"); + } + return MIPS_BE_DISCARD; + +mips_be_fatal: + print_buserr(regs); + return MIPS_BE_FATAL; +} + +void ip22_be_interrupt(int irq) +{ + const struct pt_regs *regs = get_irq_regs(); + + count_be_interrupt++; + + if (ip28_be_interrupt(regs) != MIPS_BE_DISCARD) { + /* Assume it would be too dangerous to continue ... */ + die_if_kernel("Oops", regs); + force_sig(SIGBUS, current); + } else if (debug_be_interrupt) + show_regs((struct pt_regs *)regs); +} + +static int ip28_be_handler(struct pt_regs *regs, int is_fixup) +{ + /* + * We arrive here only in the unusual case of do_be() invocation, + * i.e. by a bus error exception without a bus error interrupt. + */ + if (is_fixup) { + count_be_is_fixup++; + save_and_clear_buserr(); + return MIPS_BE_FIXUP; + } + count_be_handler++; + return ip28_be_interrupt(regs); +} + +void __init ip22_be_init(void) +{ + board_be_handler = ip28_be_handler; +} + +int ip28_show_be_info(struct seq_file *m) +{ + seq_printf(m, "IP28 be fixups\t\t: %u\n", count_be_is_fixup); + seq_printf(m, "IP28 be interrupts\t: %u\n", count_be_interrupt); + seq_printf(m, "IP28 be handler\t\t: %u\n", count_be_handler); + + return 0; +} + +static int __init debug_be_setup(char *str) +{ + debug_be_interrupt++; + return 1; +} +__setup("ip28_debug_be", debug_be_setup); diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 3305fa9ae66..a49e7c85f72 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -27,7 +27,6 @@ #include <asm/sn/hub.h> #include <asm/sn/intr.h> #include <asm/current.h> -#include <asm/smp.h> #include <asm/processor.h> #include <asm/mmu_context.h> #include <asm/thread_info.h> diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index f10d9839006..48932ce1d73 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -11,7 +11,6 @@ #include <asm/page.h> #include <asm/sections.h> -#include <asm/smp.h> #include <asm/sn/types.h> #include <asm/sn/arch.h> #include <asm/sn/gda.h> diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index a70656d4219..f15fc93d6b3 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -140,30 +140,51 @@ static __init void intr_clear_all(nasid_t nasid) REMOTE_HUB_CLR_INTR(nasid, i); } -void __init plat_smp_setup(void) +static void ip27_send_ipi_single(int destid, unsigned int action) { - cnodeid_t cnode; + int irq; - for_each_online_node(cnode) { - if (cnode == 0) - continue; - intr_clear_all(COMPACT_TO_NASID_NODEID(cnode)); + switch (action) { + case SMP_RESCHEDULE_YOURSELF: + irq = CPU_RESCHED_A_IRQ; + break; + case SMP_CALL_FUNCTION: + irq = CPU_CALL_A_IRQ; + break; + default: + panic("sendintr"); } - replicate_kernel_text(); + irq += cputoslice(destid); /* - * Assumption to be fixed: we're always booted on logical / physical - * processor 0. While we're always running on logical processor 0 - * this still means this is physical processor zero; it might for - * example be disabled in the firwware. + * Convert the compact hub number to the NASID to get the correct + * part of the address space. Then set the interrupt bit associated + * with the CPU we want to send the interrupt to. */ - alloc_cpupda(0, 0); + REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq); } -void __init plat_prepare_cpus(unsigned int max_cpus) +static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + ip27_send_ipi_single(i, action); +} + +static void __cpuinit ip27_init_secondary(void) +{ + per_cpu_init(); + local_irq_enable(); +} + +static void __cpuinit ip27_smp_finish(void) +{ +} + +static void __init ip27_cpus_done(void) { - /* We already did everything necessary earlier */ } /* @@ -171,7 +192,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * set sp to the kernel stack of the newly created idle process, gp to the proc * struct so that current_thread_info() will work. */ -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) +static void __cpuinit ip27_boot_secondary(int cpu, struct task_struct *idle) { unsigned long gp = (unsigned long)task_thread_info(idle); unsigned long sp = __KSTK_TOS(idle); @@ -181,41 +202,39 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) 0, (void *) sp, (void *) gp); } -void __cpuinit prom_init_secondary(void) +static void __init ip27_smp_setup(void) { - per_cpu_init(); - local_irq_enable(); -} - -void __init prom_cpus_done(void) -{ -} - -void __cpuinit prom_smp_finish(void) -{ -} - -void core_send_ipi(int destid, unsigned int action) -{ - int irq; + cnodeid_t cnode; - switch (action) { - case SMP_RESCHEDULE_YOURSELF: - irq = CPU_RESCHED_A_IRQ; - break; - case SMP_CALL_FUNCTION: - irq = CPU_CALL_A_IRQ; - break; - default: - panic("sendintr"); + for_each_online_node(cnode) { + if (cnode == 0) + continue; + intr_clear_all(COMPACT_TO_NASID_NODEID(cnode)); } - irq += cputoslice(destid); + replicate_kernel_text(); /* - * Convert the compact hub number to the NASID to get the correct - * part of the address space. Then set the interrupt bit associated - * with the CPU we want to send the interrupt to. + * Assumption to be fixed: we're always booted on logical / physical + * processor 0. While we're always running on logical processor 0 + * this still means this is physical processor zero; it might for + * example be disabled in the firwware. */ - REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq); + alloc_cpupda(0, 0); } + +static void __init ip27_prepare_cpus(unsigned int max_cpus) +{ + /* We already did everything necessary earlier */ +} + +struct plat_smp_ops ip27_smp_ops = { + .send_ipi_single = ip27_send_ipi_single, + .send_ipi_mask = ip27_send_ipi_mask, + .init_secondary = ip27_init_secondary, + .smp_finish = ip27_smp_finish, + .cpus_done = ip27_cpus_done, + .boot_secondary = ip27_boot_secondary, + .smp_setup = ip27_smp_setup, + .prepare_cpus = ip27_prepare_cpus, +}; diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c index 436ba78359a..183c460b9ca 100644 --- a/arch/mips/sibyte/bcm1480/smp.c +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -23,6 +23,7 @@ #include <asm/mmu_context.h> #include <asm/io.h> +#include <asm/fw/cfe/cfe_api.h> #include <asm/sibyte/sb1250.h> #include <asm/sibyte/bcm1480_regs.h> #include <asm/sibyte/bcm1480_int.h> @@ -67,28 +68,114 @@ void __cpuinit bcm1480_smp_init(void) change_c0_status(ST0_IM, imask); } -void __cpuinit bcm1480_smp_finish(void) +/* + * These are routines for dealing with the sb1250 smp capabilities + * independent of board/firmware + */ + +/* + * Simple enough; everything is set up, so just poke the appropriate mailbox + * register, and we should be set + */ +static void bcm1480_send_ipi_single(int cpu, unsigned int action) +{ + __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]); +} + +static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + bcm1480_send_ipi_single(i, action); +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void __cpuinit bcm1480_init_secondary(void) +{ + extern void bcm1480_smp_init(void); + + bcm1480_smp_init(); +} + +/* + * Do any tidying up before marking online and running the idle + * loop + */ +static void __cpuinit bcm1480_smp_finish(void) { extern void sb1480_clockevent_init(void); sb1480_clockevent_init(); local_irq_enable(); + bcm1480_smp_finish(); } /* - * These are routines for dealing with the sb1250 smp capabilities - * independent of board/firmware + * Final cleanup after all secondaries booted */ +static void bcm1480_cpus_done(void) +{ +} /* - * Simple enough; everything is set up, so just poke the appropriate mailbox - * register, and we should be set + * Setup the PC, SP, and GP of a secondary processor and start it + * running! */ -void core_send_ipi(int cpu, unsigned int action) +static void __cpuinit bcm1480_boot_secondary(int cpu, struct task_struct *idle) { - __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]); + int retval; + + retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, + __KSTK_TOS(idle), + (unsigned long)task_thread_info(idle), 0); + if (retval != 0) + printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); } +/* + * Use CFE to find out how many CPUs are available, setting up + * phys_cpu_present_map and the logical/physical mappings. + * XXXKW will the boot CPU ever not be physical 0? + * + * Common setup before any secondaries are started + */ +static void __init bcm1480_smp_setup(void) +{ + int i, num; + + cpus_clear(phys_cpu_present_map); + cpu_set(0, phys_cpu_present_map); + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + for (i = 1, num = 0; i < NR_CPUS; i++) { + if (cfe_cpu_stop(i) == 0) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + } + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +static void __init bcm1480_prepare_cpus(unsigned int max_cpus) +{ +} + +struct plat_smp_ops bcm1480_smp_ops = { + .send_ipi_single = bcm1480_send_ipi_single, + .send_ipi_mask = bcm1480_send_ipi_mask, + .init_secondary = bcm1480_init_secondary, + .smp_finish = bcm1480_smp_finish, + .cpus_done = bcm1480_cpus_done, + .boot_secondary = bcm1480_boot_secondary, + .smp_setup = bcm1480_smp_setup, + .prepare_cpus = bcm1480_prepare_cpus, +}; + void bcm1480_mailbox_interrupt(void) { int cpu = smp_processor_id(); diff --git a/arch/mips/sibyte/cfe/Makefile b/arch/mips/sibyte/cfe/Makefile index a1214937b70..02b32e142ad 100644 --- a/arch/mips/sibyte/cfe/Makefile +++ b/arch/mips/sibyte/cfe/Makefile @@ -1,3 +1,2 @@ lib-y = setup.o -lib-$(CONFIG_SMP) += smp.o lib-$(CONFIG_SIBYTE_CFE_CONSOLE) += console.o diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index dbd6e6fdd3f..33fce826f8b 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -28,6 +28,7 @@ #include <asm/bootinfo.h> #include <asm/reboot.h> #include <asm/sibyte/board.h> +#include <asm/smp-ops.h> #include <asm/fw/cfe/cfe_api.h> #include <asm/fw/cfe/cfe_error.h> @@ -232,6 +233,9 @@ static int __init initrd_setup(char *str) #endif +extern struct plat_smp_ops sb_smp_ops; +extern struct plat_smp_ops bcm1480_smp_ops; + /* * prom_init is called just after the cpu type is determined, from setup_arch() */ @@ -297,9 +301,6 @@ void __init prom_init(void) * command line */ strcpy(arcs_cmdline, "root=/dev/ram0 "); -#ifdef CONFIG_SIBYTE_PTSWARM - strcat(arcs_cmdline, "console=ttyS0,115200 "); -#endif } else { /* The loader should have set the command line */ /* too early for panic to do any good */ @@ -340,6 +341,13 @@ void __init prom_init(void) arcs_cmdline[CL_SIZE-1] = 0; prom_meminit(); + +#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) + register_smp_ops(&sb_smp_ops); +#endif +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + register_smp_ops(&bcm1480_smp_ops); +#endif } void __init prom_free_prom_memory(void) diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c deleted file mode 100644 index 534a62912f2..00000000000 --- a/arch/mips/sibyte/cfe/smp.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <asm/processor.h> - -#include <asm/fw/cfe/cfe_api.h> -#include <asm/fw/cfe/cfe_error.h> - -/* - * Use CFE to find out how many CPUs are available, setting up - * phys_cpu_present_map and the logical/physical mappings. - * XXXKW will the boot CPU ever not be physical 0? - * - * Common setup before any secondaries are started - */ -void __init plat_smp_setup(void) -{ - int i, num; - - cpus_clear(phys_cpu_present_map); - cpu_set(0, phys_cpu_present_map); - __cpu_number_map[0] = 0; - __cpu_logical_map[0] = 0; - - for (i = 1, num = 0; i < NR_CPUS; i++) { - if (cfe_cpu_stop(i) == 0) { - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; - } - } - printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); -} - -void __init plat_prepare_cpus(unsigned int max_cpus) -{ -} - -/* - * Setup the PC, SP, and GP of a secondary processor and start it - * running! - */ -void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) -{ - int retval; - - retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, - __KSTK_TOS(idle), - (unsigned long)task_thread_info(idle), 0); - if (retval != 0) - printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); -} - -/* - * Code to run on secondary just after probing the CPU - */ -void __cpuinit prom_init_secondary(void) -{ -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) - extern void bcm1480_smp_init(void); - bcm1480_smp_init(); -#elif defined(CONFIG_SIBYTE_SB1250) - extern void sb1250_smp_init(void); - sb1250_smp_init(); -#else -#error invalid SMP configuration -#endif -} - -/* - * Do any tidying up before marking online and running the idle - * loop - */ -void __cpuinit prom_smp_finish(void) -{ -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) - extern void bcm1480_smp_finish(void); - bcm1480_smp_finish(); -#elif defined(CONFIG_SIBYTE_SB1250) - extern void sb1250_smp_finish(void); - sb1250_smp_finish(); -#else -#error invalid SMP configuration -#endif -} - -/* - * Final cleanup after all secondaries booted - */ -void prom_cpus_done(void) -{ -} diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index 3f52c95a4eb..0734b933e96 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -24,6 +24,7 @@ #include <asm/mmu_context.h> #include <asm/io.h> +#include <asm/fw/cfe/cfe_api.h> #include <asm/sibyte/sb1250.h> #include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_int.h> @@ -55,7 +56,43 @@ void __cpuinit sb1250_smp_init(void) change_c0_status(ST0_IM, imask); } -void __cpuinit sb1250_smp_finish(void) +/* + * These are routines for dealing with the sb1250 smp capabilities + * independent of board/firmware + */ + +/* + * Simple enough; everything is set up, so just poke the appropriate mailbox + * register, and we should be set + */ +static void sb1250_send_ipi_single(int cpu, unsigned int action) +{ + __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); +} + +static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + sb1250_send_ipi_single(i, action); +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void __cpuinit sb1250_init_secondary(void) +{ + extern void sb1250_smp_init(void); + + sb1250_smp_init(); +} + +/* + * Do any tidying up before marking online and running the idle + * loop + */ +static void __cpuinit sb1250_smp_finish(void) { extern void sb1250_clockevent_init(void); @@ -64,19 +101,68 @@ void __cpuinit sb1250_smp_finish(void) } /* - * These are routines for dealing with the sb1250 smp capabilities - * independent of board/firmware + * Final cleanup after all secondaries booted */ +static void sb1250_cpus_done(void) +{ +} /* - * Simple enough; everything is set up, so just poke the appropriate mailbox - * register, and we should be set + * Setup the PC, SP, and GP of a secondary processor and start it + * running! */ -void core_send_ipi(int cpu, unsigned int action) +static void __cpuinit sb1250_boot_secondary(int cpu, struct task_struct *idle) { - __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); + int retval; + + retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, + __KSTK_TOS(idle), + (unsigned long)task_thread_info(idle), 0); + if (retval != 0) + printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); } +/* + * Use CFE to find out how many CPUs are available, setting up + * phys_cpu_present_map and the logical/physical mappings. + * XXXKW will the boot CPU ever not be physical 0? + * + * Common setup before any secondaries are started + */ +static void __init sb1250_smp_setup(void) +{ + int i, num; + + cpus_clear(phys_cpu_present_map); + cpu_set(0, phys_cpu_present_map); + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + for (i = 1, num = 0; i < NR_CPUS; i++) { + if (cfe_cpu_stop(i) == 0) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + } + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +static void __init sb1250_prepare_cpus(unsigned int max_cpus) +{ +} + +struct plat_smp_ops sb_smp_ops = { + .send_ipi_single = sb1250_send_ipi_single, + .send_ipi_mask = sb1250_send_ipi_mask, + .init_secondary = sb1250_init_secondary, + .smp_finish = sb1250_smp_finish, + .cpus_done = sb1250_cpus_done, + .boot_secondary = sb1250_boot_secondary, + .smp_setup = sb1250_smp_setup, + .prepare_cpus = sb1250_prepare_cpus, +}; + void sb1250_mailbox_interrupt(void) { int cpu = smp_processor_id(); diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index 3a99cd62c0b..a7dbeebe7fe 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile @@ -3,6 +3,6 @@ # obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o -obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o +obj-$(CONFIG_EISA) += eisa.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index b7460759997..3f8cf5eb2f0 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -117,10 +117,19 @@ static struct resource sc26xx_rsrc[] = { } }; +static unsigned int sc26xx_data[2] = { + /* DTR | RTS | DSR | CTS | DCD | RI */ + (8 << 0) | (4 << 4) | (6 << 8) | (0 << 12) | (6 << 16) | (0 << 20), + (3 << 0) | (2 << 4) | (1 << 8) | (2 << 12) | (3 << 16) | (4 << 20) +}; + static struct platform_device sc26xx_pdev = { .name = "SC26xx", .num_resources = ARRAY_SIZE(sc26xx_rsrc), - .resource = sc26xx_rsrc + .resource = sc26xx_rsrc, + .dev = { + .platform_data = sc26xx_data, + } }; static u32 a20r_ack_hwint(void) @@ -231,9 +240,9 @@ static int __init snirm_a20r_setup_devinit(void) platform_device_register(&sc26xx_pdev); platform_device_register(&a20r_serial8250_device); platform_device_register(&a20r_ds1216_device); + sni_eisa_root_init(); break; } - return 0; } diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c new file mode 100644 index 00000000000..7396cd71990 --- /dev/null +++ b/arch/mips/sni/eisa.c @@ -0,0 +1,50 @@ +/* + * Virtual EISA root driver. + * Acts as a placeholder if we don't have a proper EISA bridge. + * + * (C) 2003 Marc Zyngier <maz@wild-wind.fr.eu.org> + * modified for SNI usage by Thomas Bogendoerfer + * + * This code is released under the GPL version 2. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/eisa.h> +#include <linux/init.h> + +/* The default EISA device parent (virtual root device). + * Now use a platform device, since that's the obvious choice. */ + +static struct platform_device eisa_root_dev = { + .name = "eisa", + .id = 0, +}; + +static struct eisa_root_device eisa_bus_root = { + .dev = &eisa_root_dev.dev, + .bus_base_addr = 0, + .res = &ioport_resource, + .slots = EISA_MAX_SLOTS, + .dma_mask = 0xffffffff, + .force_probe = 1, +}; + +int __init sni_eisa_root_init(void) +{ + int r; + + r = platform_device_register(&eisa_root_dev); + if (!r) + return r; + + eisa_root_dev.dev.driver_data = &eisa_bus_root; + + if (eisa_root_register(&eisa_bus_root)) { + /* A real bridge may have been registered before + * us. So quietly unregister. */ + platform_device_unregister(&eisa_root_dev); + return -1; + } + return 0; +} diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 9ccffdfb828..e8e72bb3a9a 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -35,14 +35,14 @@ static irqreturn_t sni_isa_irq_handler(int dummy, void *p) if (unlikely(irq < 0)) return IRQ_NONE; - do_IRQ(irq); + generic_handle_irq(irq); return IRQ_HANDLED; } struct irqaction sni_isa_irq = { .handler = sni_isa_irq_handler, .name = "ISA", - .flags = IRQF_SHARED + .flags = IRQF_SHARED | IRQF_DISABLED }; /* diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index 416f397c768..e5f12cf96e8 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -76,6 +76,11 @@ static struct platform_device pcit_cmos_device = { .resource = pcit_cmos_rsrc }; +static struct platform_device pcit_pcspeaker_pdev = { + .name = "pcspkr", + .id = -1, +}; + static struct resource sni_io_resource = { .start = 0x00000000UL, .end = 0x03bfffffUL, @@ -277,11 +282,13 @@ static int __init snirm_pcit_setup_devinit(void) case SNI_BRD_PCI_TOWER: platform_device_register(&pcit_serial8250_device); platform_device_register(&pcit_cmos_device); + platform_device_register(&pcit_pcspeaker_pdev); break; case SNI_BRD_PCI_TOWER_CPLUS: platform_device_register(&pcit_cplus_serial8250_device); platform_device_register(&pcit_cmos_device); + platform_device_register(&pcit_pcspeaker_pdev); break; } return 0; diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 67b061eef6c..5310aa75afa 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -5,30 +5,36 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * i8259 parts ripped out of arch/mips/kernel/i8259.c */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/io.h> #include <asm/sni.h> #include <asm/time.h> #include <asm/irq_cpu.h> -#define PORT(_base,_irq) \ +#define RM200_I8259A_IRQ_BASE 32 + +#define MEMPORT(_base,_irq) \ { \ - .iobase = _base, \ + .mapbase = _base, \ .irq = _irq, \ .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP, \ } static struct plat_serial8250_port rm200_data[] = { - PORT(0x3f8, 4), - PORT(0x2f8, 3), + MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4), + MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3), { }, }; @@ -112,15 +118,311 @@ static int __init snirm_setup_devinit(void) platform_device_register(&rm200_ds1216_device); platform_device_register(&snirm_82596_rm200_pdev); platform_device_register(&snirm_53c710_rm200_pdev); + sni_eisa_root_init(); } return 0; } device_initcall(snirm_setup_devinit); +/* + * RM200 has an ISA and an EISA bus. The iSA bus is only used + * for onboard devices and also has twi i8259 PICs. Since these + * PICs are no accessible via inb/outb the following code uses + * readb/writeb to access them + */ + +DEFINE_SPINLOCK(sni_rm200_i8259A_lock); +#define PIC_CMD 0x00 +#define PIC_IMR 0x01 +#define PIC_ISR PIC_CMD +#define PIC_POLL PIC_ISR +#define PIC_OCW3 PIC_ISR + +/* i8259A PIC related value */ +#define PIC_CASCADE_IR 2 +#define MASTER_ICW4_DEFAULT 0x01 +#define SLAVE_ICW4_DEFAULT 0x01 + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +static unsigned int rm200_cached_irq_mask = 0xffff; +static __iomem u8 *rm200_pic_master; +static __iomem u8 *rm200_pic_slave; + +#define cached_master_mask (rm200_cached_irq_mask) +#define cached_slave_mask (rm200_cached_irq_mask >> 8) + +static void sni_rm200_disable_8259A_irq(unsigned int irq) +{ + unsigned int mask; + unsigned long flags; + + irq -= RM200_I8259A_IRQ_BASE; + mask = 1 << irq; + spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + rm200_cached_irq_mask |= mask; + if (irq & 8) + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + else + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); +} + +static void sni_rm200_enable_8259A_irq(unsigned int irq) +{ + unsigned int mask; + unsigned long flags; + + irq -= RM200_I8259A_IRQ_BASE; + mask = ~(1 << irq); + spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + rm200_cached_irq_mask &= mask; + if (irq & 8) + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + else + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); +} + +static inline int sni_rm200_i8259A_irq_real(unsigned int irq) +{ + int value; + int irqmask = 1 << irq; + + if (irq < 8) { + writeb(0x0B, rm200_pic_master + PIC_CMD); + value = readb(rm200_pic_master + PIC_CMD) & irqmask; + writeb(0x0A, rm200_pic_master + PIC_CMD); + return value; + } + writeb(0x0B, rm200_pic_slave + PIC_CMD); /* ISR register */ + value = readb(rm200_pic_slave + PIC_CMD) & (irqmask >> 8); + writeb(0x0A, rm200_pic_slave + PIC_CMD); + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +void sni_rm200_mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask; + unsigned long flags; + + irq -= RM200_I8259A_IRQ_BASE; + irqmask = 1 << irq; + spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (rm200_cached_irq_mask & irqmask) + goto spurious_8259A_irq; + rm200_cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + readb(rm200_pic_slave + PIC_IMR); + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + writeb(0x60+(irq & 7), rm200_pic_slave + PIC_CMD); + writeb(0x60+PIC_CASCADE_IR, rm200_pic_master + PIC_CMD); + } else { + readb(rm200_pic_master + PIC_IMR); + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + writeb(0x60+irq, rm200_pic_master + PIC_CMD); + } + spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (sni_rm200_i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { + printk(KERN_DEBUG + "spurious RM200 8259A interrupt: IRQ%d.\n", irq); + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static struct irq_chip sni_rm200_i8259A_chip = { + .name = "RM200-XT-PIC", + .mask = sni_rm200_disable_8259A_irq, + .unmask = sni_rm200_enable_8259A_irq, + .mask_ack = sni_rm200_mask_and_ack_8259A, +}; + +/* + * Do the traditional i8259 interrupt polling thing. This is for the few + * cases where no better interrupt acknowledge method is available and we + * absolutely must touch the i8259. + */ +static inline int sni_rm200_i8259_irq(void) +{ + int irq; + + spin_lock(&sni_rm200_i8259A_lock); + + /* Perform an interrupt acknowledge cycle on controller 1. */ + writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */ + irq = readb(rm200_pic_master + PIC_CMD) & 7; + if (irq == PIC_CASCADE_IR) { + /* + * Interrupt is cascaded so perform interrupt + * acknowledge on controller 2. + */ + writeb(0x0C, rm200_pic_slave + PIC_CMD); /* prepare for poll */ + irq = (readb(rm200_pic_slave + PIC_CMD) & 7) + 8; + } + + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + writeb(0x0B, rm200_pic_master + PIC_ISR); /* ISR register */ + if (~readb(rm200_pic_master + PIC_ISR) & 0x80) + irq = -1; + } + + spin_unlock(&sni_rm200_i8259A_lock); + + return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq; +} + +void sni_rm200_init_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + + writeb(0xff, rm200_pic_master + PIC_IMR); + writeb(0xff, rm200_pic_slave + PIC_IMR); + + writeb(0x11, rm200_pic_master + PIC_CMD); + writeb(0, rm200_pic_master + PIC_IMR); + writeb(1U << PIC_CASCADE_IR, rm200_pic_master + PIC_IMR); + writeb(MASTER_ICW4_DEFAULT, rm200_pic_master + PIC_IMR); + writeb(0x11, rm200_pic_slave + PIC_CMD); + writeb(8, rm200_pic_slave + PIC_IMR); + writeb(PIC_CASCADE_IR, rm200_pic_slave + PIC_IMR); + writeb(SLAVE_ICW4_DEFAULT, rm200_pic_slave + PIC_IMR); + udelay(100); /* wait for 8259A to initialize */ + + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + + spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); +} + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction sni_rm200_irq2 = { + no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL +}; + +static struct resource sni_rm200_pic1_resource = { + .name = "onboard ISA pic1", + .start = 0x16000020, + .end = 0x16000023, + .flags = IORESOURCE_BUSY +}; + +static struct resource sni_rm200_pic2_resource = { + .name = "onboard ISA pic2", + .start = 0x160000a0, + .end = 0x160000a3, + .flags = IORESOURCE_BUSY +}; + +/* ISA irq handler */ +static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p) +{ + int irq; + + irq = sni_rm200_i8259_irq(); + if (unlikely(irq < 0)) + return IRQ_NONE; + + do_IRQ(irq); + return IRQ_HANDLED; +} + +struct irqaction sni_rm200_i8259A_irq = { + .handler = sni_rm200_i8259A_irq_handler, + .name = "onboard ISA", + .flags = IRQF_SHARED +}; + +void __init sni_rm200_i8259_irqs(void) +{ + int i; + + rm200_pic_master = ioremap_nocache(0x16000020, 4); + if (!rm200_pic_master) + return; + rm200_pic_slave = ioremap_nocache(0x160000a0, 4); + if (!rm200_pic_master) { + iounmap(rm200_pic_master); + return; + } + + insert_resource(&iomem_resource, &sni_rm200_pic1_resource); + insert_resource(&iomem_resource, &sni_rm200_pic2_resource); + + sni_rm200_init_8259A(); + + for (i = RM200_I8259A_IRQ_BASE; i < RM200_I8259A_IRQ_BASE + 16; i++) + set_irq_chip_and_handler(i, &sni_rm200_i8259A_chip, + handle_level_irq); + + setup_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, &sni_rm200_irq2); +} + -#define SNI_RM200_INT_STAT_REG 0xbc000000 -#define SNI_RM200_INT_ENA_REG 0xbc080000 +#define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000) +#define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000) #define SNI_RM200_INT_START 24 #define SNI_RM200_INT_END 28 @@ -181,17 +483,17 @@ void __init sni_rm200_irq_init(void) * (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f; + sni_rm200_i8259_irqs(); mips_cpu_irq_init(); /* Actually we've got more interrupts to handle ... */ for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++) set_irq_chip(i, &rm200_irq_type); sni_hwint = sni_rm200_hwint; change_c0_status(ST0_IM, IE_IRQ0); - setup_irq(SNI_RM200_INT_START + 0, &sni_isa_irq); + setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq); + setup_irq(SNI_RM200_INT_START + 1, &sni_isa_irq); } void __init sni_rm200_init(void) { - set_io_port_base(SNI_PORT_BASE + 0x02000000); - ioport_resource.end += 0x02000000; } diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index e8b26bdee24..5484e1c6205 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -19,11 +19,17 @@ #include <asm/sgialib.h> #endif +#ifdef CONFIG_SNIPROM +#include <asm/mipsprom.h> +#endif + +#include <asm/bootinfo.h> #include <asm/io.h> #include <asm/reboot.h> #include <asm/sni.h> unsigned int sni_brd_type; +EXPORT_SYMBOL(sni_brd_type); extern void sni_machine_restart(char *command); extern void sni_machine_power_off(void); @@ -47,20 +53,152 @@ static void __init sni_display_setup(void) #endif } +static void __init sni_console_setup(void) +{ +#ifndef CONFIG_ARC + char *ctype; + char *cdev; + char *baud; + int port; + static char options[8]; + + cdev = prom_getenv("console_dev"); + if (strncmp(cdev, "tty", 3) == 0) { + ctype = prom_getenv("console"); + switch (*ctype) { + default: + case 'l': + port = 0; + baud = prom_getenv("lbaud"); + break; + case 'r': + port = 1; + baud = prom_getenv("rbaud"); + break; + } + if (baud) + strcpy(options, baud); + if (strncmp(cdev, "tty552", 6) == 0) + add_preferred_console("ttyS", port, + baud ? options : NULL); + else + add_preferred_console("ttySC", port, + baud ? options : NULL); + } +#endif +} + +#ifdef DEBUG +static void __init sni_idprom_dump(void) +{ + int i; + + pr_debug("SNI IDProm dump:\n"); + for (i = 0; i < 256; i++) { + if (i%16 == 0) + pr_debug("%04x ", i); + + printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i)); + + if (i % 16 == 15) + printk("\n"); + } +} +#endif void __init plat_mem_setup(void) { + int cputype; + set_io_port_base(SNI_PORT_BASE); // ioport_resource.end = sni_io_resource.end; /* * Setup (E)ISA I/O memory access stuff */ - isa_slot_offset = 0xb0000000; + isa_slot_offset = CKSEG1ADDR(0xb0000000); #ifdef CONFIG_EISA EISA_bus = 1; #endif + sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE; + cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE; + switch (sni_brd_type) { + case SNI_BRD_TOWER_OASIC: + switch (cputype) { + case SNI_CPU_M8030: + system_type = "RM400-330"; + break; + case SNI_CPU_M8031: + system_type = "RM400-430"; + break; + case SNI_CPU_M8037: + system_type = "RM400-530"; + break; + case SNI_CPU_M8034: + system_type = "RM400-730"; + break; + default: + system_type = "RM400-xxx"; + break; + } + break; + case SNI_BRD_MINITOWER: + switch (cputype) { + case SNI_CPU_M8021: + case SNI_CPU_M8043: + system_type = "RM400-120"; + break; + case SNI_CPU_M8040: + system_type = "RM400-220"; + break; + case SNI_CPU_M8053: + system_type = "RM400-225"; + break; + case SNI_CPU_M8050: + system_type = "RM400-420"; + break; + default: + system_type = "RM400-xxx"; + break; + } + break; + case SNI_BRD_PCI_TOWER: + system_type = "RM400-Cxx"; + break; + case SNI_BRD_RM200: + system_type = "RM200-xxx"; + break; + case SNI_BRD_PCI_MTOWER: + system_type = "RM300-Cxx"; + break; + case SNI_BRD_PCI_DESKTOP: + switch (read_c0_prid() & 0xff00) { + case PRID_IMP_R4600: + case PRID_IMP_R4700: + system_type = "RM200-C20"; + break; + case PRID_IMP_R5000: + system_type = "RM200-C40"; + break; + default: + system_type = "RM200-Cxx"; + break; + } + break; + case SNI_BRD_PCI_TOWER_CPLUS: + system_type = "RM400-Exx"; + break; + case SNI_BRD_PCI_MTOWER_CPLUS: + system_type = "RM300-Exx"; + break; + } + pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type, system_type); + +#ifdef DEBUG + sni_idprom_dump(); +#endif + switch (sni_brd_type) { case SNI_BRD_10: case SNI_BRD_10NEW: @@ -89,9 +227,10 @@ void __init plat_mem_setup(void) pm_power_off = sni_machine_power_off; sni_display_setup(); + sni_console_setup(); } -#if CONFIG_PCI +#ifdef CONFIG_PCI #include <linux/pci.h> #include <video/vga.h> diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c deleted file mode 100644 index eff4b89d7b7..00000000000 --- a/arch/mips/sni/sniprom.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * Big Endian PROM code for SNI RM machines - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2006 Florian Lohoff (flo@rfc822.org) - * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) - */ - -#define DEBUG - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/console.h> - -#include <asm/addrspace.h> -#include <asm/sni.h> -#include <asm/mipsprom.h> -#include <asm/mipsregs.h> -#include <asm/bootinfo.h> - -/* special SNI prom calls */ -/* - * This does not exist in all proms - SINIX compares - * the prom env variable "version" against "2.0008" - * or greater. If lesser it tries to probe interesting - * registers - */ -#define PROM_GET_MEMCONF 58 - -#define PROM_VEC (u64 *)CKSEG1ADDR(0x1fc00000) -#define PROM_ENTRY(x) (PROM_VEC + (x)) - - -static int *(*__prom_putchar)(int) = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR); - -void prom_putchar(char c) -{ - __prom_putchar(c); -} - -static char *(*__prom_getenv)(char *) = (char *(*)(char *))PROM_ENTRY(PROM_GETENV); -static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF); - -char *prom_getenv(char *s) -{ - return __prom_getenv(s); -} - -void __init prom_free_prom_memory(void) -{ -} - -/* - * /proc/cpuinfo system type - * - */ -static const char *systype = "Unknown"; -const char *get_system_type(void) -{ - return systype; -} - -#define SNI_IDPROM_BASE 0xbff00000 -#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE+0x28) /* Memsize in 16MB quantities */ -#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE+0x29) /* Board Type */ -#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE+0x30) /* CPU Type */ - -#define SNI_IDPROM_SIZE 0x1000 - -#ifdef DEBUG -static void __init sni_idprom_dump(void) -{ - int i; - - pr_debug("SNI IDProm dump:\n"); - for (i = 0; i < 256; i++) { - if (i%16 == 0) - pr_debug("%04x ", i); - - printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i)); - - if (i % 16 == 15) - printk("\n"); - } -} -#endif - -static void __init sni_mem_init(void ) -{ - int i, memsize; - struct membank { - u32 size; - u32 base; - u32 size2; - u32 pad1; - u32 pad2; - } memconf[8]; - - /* MemSIZE from prom in 16MByte chunks */ - memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16; - - pr_debug("IDProm memsize: %lu MByte\n", memsize); - - /* get memory bank layout from prom */ - __prom_get_memconf(&memconf); - - pr_debug("prom_get_mem_conf memory configuration:\n"); - for (i = 0;i < 8 && memconf[i].size; i++) { - if (sni_brd_type == SNI_BRD_PCI_TOWER || - sni_brd_type == SNI_BRD_PCI_TOWER_CPLUS) { - if (memconf[i].base >= 0x20000000 && - memconf[i].base < 0x30000000) { - memconf[i].base -= 0x20000000; - } - } - pr_debug("Bank%d: %08x @ %08x\n", i, - memconf[i].size, memconf[i].base); - add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM); - } -} - -static void __init sni_console_setup(void) -{ - char *ctype; - char *cdev; - char *baud; - int port; - static char options[8]; - - cdev = prom_getenv("console_dev"); - if (strncmp (cdev, "tty", 3) == 0) { - ctype = prom_getenv("console"); - switch (*ctype) { - default: - case 'l': - port = 0; - baud = prom_getenv("lbaud"); - break; - case 'r': - port = 1; - baud = prom_getenv("rbaud"); - break; - } - if (baud) - strcpy(options, baud); - if (strncmp (cdev, "tty552", 6) == 0) - add_preferred_console("ttyS", port, baud ? options : NULL); - else - add_preferred_console("ttySC", port, baud ? options : NULL); - } -} - -void __init prom_init(void) -{ - int argc = fw_arg0; - char **argv = (void *)fw_arg1; - int i; - int cputype; - - sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE; - cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE; - switch (sni_brd_type) { - case SNI_BRD_TOWER_OASIC: - switch (cputype) { - case SNI_CPU_M8030: - systype = "RM400-330"; - break; - case SNI_CPU_M8031: - systype = "RM400-430"; - break; - case SNI_CPU_M8037: - systype = "RM400-530"; - break; - case SNI_CPU_M8034: - systype = "RM400-730"; - break; - default: - systype = "RM400-xxx"; - break; - } - break; - case SNI_BRD_MINITOWER: - switch (cputype) { - case SNI_CPU_M8021: - case SNI_CPU_M8043: - systype = "RM400-120"; - break; - case SNI_CPU_M8040: - systype = "RM400-220"; - break; - case SNI_CPU_M8053: - systype = "RM400-225"; - break; - case SNI_CPU_M8050: - systype = "RM400-420"; - break; - default: - systype = "RM400-xxx"; - break; - } - break; - case SNI_BRD_PCI_TOWER: - systype = "RM400-Cxx"; - break; - case SNI_BRD_RM200: - systype = "RM200-xxx"; - break; - case SNI_BRD_PCI_MTOWER: - systype = "RM300-Cxx"; - break; - case SNI_BRD_PCI_DESKTOP: - switch (read_c0_prid() & 0xff00) { - case PRID_IMP_R4600: - case PRID_IMP_R4700: - systype = "RM200-C20"; - break; - case PRID_IMP_R5000: - systype = "RM200-C40"; - break; - default: - systype = "RM200-Cxx"; - break; - } - break; - case SNI_BRD_PCI_TOWER_CPLUS: - systype = "RM400-Exx"; - break; - case SNI_BRD_PCI_MTOWER_CPLUS: - systype = "RM300-Exx"; - break; - } - pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type, systype); - -#ifdef DEBUG - sni_idprom_dump(); -#endif - sni_mem_init(); - sni_console_setup(); - - /* copy prom cmdline parameters to kernel cmdline */ - for (i = 1; i < argc; i++) { - strcat(arcs_cmdline, argv[i]); - if (i < (argc - 1)) - strcat(arcs_cmdline, " "); - } -} - diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 6f339af08d2..796e3ce2872 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -178,6 +178,7 @@ void __init plat_time_init(void) sni_a20r_timer_setup(); break; } + setup_pit_timer(); } unsigned long read_persistent_clock(void) diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile index e8629617f25..a7fe76a6496 100644 --- a/arch/mips/tx4927/common/Makefile +++ b/arch/mips/tx4927/common/Makefile @@ -2,7 +2,7 @@ # Makefile for common code for Toshiba TX4927 based systems # -obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o +obj-y += tx4927_prom.o tx4927_irq.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_KGDB) += tx4927_dbgio.o diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c deleted file mode 100644 index 36c5f200eb3..00000000000 --- a/arch/mips/tx4927/common/tx4927_setup.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/irq.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/tx4927/tx4927.h> - - -#undef DEBUG - -void dump_cp0(char *key); - - -void __init plat_mem_setup(void) -{ -#ifdef CONFIG_TOSHIBA_RBTX4927 - { - extern void toshiba_rbtx4927_setup(void); - toshiba_rbtx4927_setup(); - } -#endif -} - -void __init plat_time_init(void) -{ -#ifdef CONFIG_TOSHIBA_RBTX4927 - { - extern void toshiba_rbtx4927_time_init(void); - toshiba_rbtx4927_time_init(); - } -#endif -} - -#ifdef DEBUG -void print_cp0(char *key, int num, char *name, u32 val) -{ - printk("%s cp0:%02d:%s=0x%08x\n", key, num, name, val); - return; -} - -void -dump_cp0(char *key) -{ - if (key == NULL) - key = ""; - - print_cp0(key, 0, "INDEX ", read_c0_index()); - print_cp0(key, 2, "ENTRYLO1", read_c0_entrylo0()); - print_cp0(key, 3, "ENTRYLO2", read_c0_entrylo1()); - print_cp0(key, 4, "CONTEXT ", read_c0_context()); - print_cp0(key, 5, "PAGEMASK", read_c0_pagemask()); - print_cp0(key, 6, "WIRED ", read_c0_wired()); - //print_cp0(key, 8, "BADVADDR", read_c0_badvaddr()); - print_cp0(key, 9, "COUNT ", read_c0_count()); - print_cp0(key, 10, "ENTRYHI ", read_c0_entryhi()); - print_cp0(key, 11, "COMPARE ", read_c0_compare()); - print_cp0(key, 12, "STATUS ", read_c0_status()); - print_cp0(key, 13, "CAUSE ", read_c0_cause() & 0xffff87ff); - print_cp0(key, 16, "CONFIG ", read_c0_config()); - return; -} - -void print_pic(char *key, unsigned long reg, char *name) -{ - printk(KERN_INFO "%s pic:0x%08lx:%s=0x%08x\n", key, reg, name, - __raw_readl((void __iomem *)reg)); - return; -} - - -void dump_pic(char *key) -{ - if (key == NULL) - key = ""; - - print_pic(key, 0xff1ff600, "IRDEN "); - print_pic(key, 0xff1ff604, "IRDM0 "); - print_pic(key, 0xff1ff608, "IRDM1 "); - - print_pic(key, 0xff1ff610, "IRLVL0 "); - print_pic(key, 0xff1ff614, "IRLVL1 "); - print_pic(key, 0xff1ff618, "IRLVL2 "); - print_pic(key, 0xff1ff61c, "IRLVL3 "); - print_pic(key, 0xff1ff620, "IRLVL4 "); - print_pic(key, 0xff1ff624, "IRLVL5 "); - print_pic(key, 0xff1ff628, "IRLVL6 "); - print_pic(key, 0xff1ff62c, "IRLVL7 "); - - print_pic(key, 0xff1ff640, "IRMSK "); - print_pic(key, 0xff1ff660, "IREDC "); - print_pic(key, 0xff1ff680, "IRPND "); - print_pic(key, 0xff1ff6a0, "IRCS "); - - print_pic(key, 0xff1ff514, "IRFLAG1 "); /* don't read IRLAG0 -- it hangs system */ - - print_pic(key, 0xff1ff518, "IRPOL "); - print_pic(key, 0xff1ff51c, "IRRCNT "); - print_pic(key, 0xff1ff520, "IRMASKINT"); - print_pic(key, 0xff1ff524, "IRMASKEXT"); - - return; -} - - -void print_addr(char *hdr, char *key, unsigned long addr) -{ - printk(KERN_INFO "%s %s:0x%08lx=0x%08x\n", hdr, key, addr, - __raw_readl((void __iomem *)addr)); - return; -} - - -void dump_180(char *key) -{ - u32 i; - - for (i = 0x80000180; i < 0x80000180 + 0x80; i += 4) { - print_addr("180", key, i); - } - return; -} - - -void dump_eh0(char *key) -{ - int i; - extern unsigned long exception_handlers[]; - - for (i = (int) exception_handlers; - i < (int) (exception_handlers + 20); i += 4) { - print_addr("eh0", key, i); - } - - return; -} - -void pk0(void) -{ - volatile u32 val; - - __asm__ __volatile__("ori %0, $26, 0":"=r"(val) - ); - printk("k0=[0x%08x]\n", val); -} -#endif diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 0299595ce1c..e466e5e711d 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -45,27 +45,19 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/types.h> -#include <linux/mm.h> -#include <linux/swap.h> #include <linux/ioport.h> -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/pci.h> -#include <linux/timex.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <asm/bootinfo.h> -#include <asm/page.h> #include <asm/io.h> -#include <asm/irq.h> -#include <asm/irq_regs.h> #include <asm/processor.h> #include <asm/reboot.h> #include <asm/time.h> #include <asm/txx9tmr.h> -#include <linux/bootmem.h> -#include <linux/blkdev.h> #ifdef CONFIG_TOSHIBA_FPCIB0 #include <asm/tx4927/smsc_fdc37m81x.h> #endif @@ -73,42 +65,26 @@ #ifdef CONFIG_PCI #include <asm/tx4927/tx4927_pci.h> #endif -#ifdef CONFIG_BLK_DEV_IDEPCI -#include <linux/hdreg.h> -#include <linux/ide.h> -#endif #ifdef CONFIG_SERIAL_TXX9 -#include <linux/tty.h> -#include <linux/serial.h> #include <linux/serial_core.h> #endif #undef TOSHIBA_RBTX4927_SETUP_DEBUG #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -#define TOSHIBA_RBTX4927_SETUP_NONE 0x00000000 - -#define TOSHIBA_RBTX4927_SETUP_INFO ( 1 << 0 ) -#define TOSHIBA_RBTX4927_SETUP_WARN ( 1 << 1 ) -#define TOSHIBA_RBTX4927_SETUP_EROR ( 1 << 2 ) - -#define TOSHIBA_RBTX4927_SETUP_EFWFU ( 1 << 3 ) #define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 ) #define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 ) #define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 ) #define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 ) -#define TOSHIBA_RBTX4927_SETUP_PCI66 ( 1 << 10 ) #define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff #endif #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG static const u32 toshiba_rbtx4927_setup_debug_flag = - (TOSHIBA_RBTX4927_SETUP_NONE | TOSHIBA_RBTX4927_SETUP_INFO | - TOSHIBA_RBTX4927_SETUP_WARN | TOSHIBA_RBTX4927_SETUP_EROR | - TOSHIBA_RBTX4927_SETUP_EFWFU | TOSHIBA_RBTX4927_SETUP_SETUP | + (TOSHIBA_RBTX4927_SETUP_SETUP | | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 | - TOSHIBA_RBTX4927_SETUP_PCI2 | TOSHIBA_RBTX4927_SETUP_PCI66); + TOSHIBA_RBTX4927_SETUP_PCI2); #endif #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG @@ -718,7 +694,7 @@ void toshiba_rbtx4927_power_off(void) /* no return */ } -void __init toshiba_rbtx4927_setup(void) +void __init plat_mem_setup(void) { int i; u32 cp0_config; @@ -741,13 +717,6 @@ void __init toshiba_rbtx4927_setup(void) cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); write_c0_config(cp0_config); -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - { - extern void dump_cp0(char *); - dump_cp0("toshiba_rbtx4927_early_fw_fixup"); - } -#endif - set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, ":mips_io_port_base=0x%08lx\n", @@ -835,6 +804,8 @@ void __init toshiba_rbtx4927_setup(void) } /* CCFG */ + /* do reset on watchdog */ + tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; /* enable Timeout BusError */ if (tx4927_ccfg_toeon) tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; @@ -936,8 +907,7 @@ void __init toshiba_rbtx4927_setup(void) "+\n"); } -void __init -toshiba_rbtx4927_time_init(void) +void __init plat_time_init(void) { mips_hpt_frequency = tx4927_cpu_clock / 2; if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) @@ -977,3 +947,55 @@ static int __init rbtx4927_ne_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } device_initcall(rbtx4927_ne_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init rbtx4927_wdt_init(void) +{ + return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); +} +device_initcall(rbtx4927_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "imbus_clk")) + return (struct clk *)50000000; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile index eff3d1d47f8..56aa1ed1ee0 100644 --- a/arch/mips/tx4938/common/Makefile +++ b/arch/mips/tx4938/common/Makefile @@ -2,7 +2,7 @@ # Makefile for common code for Toshiba TX4927 based systems # -obj-y += prom.o setup.o irq.o +obj-y += prom.o irq.o obj-$(CONFIG_KGDB) += dbgio.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c deleted file mode 100644 index 3ba4101d141..00000000000 --- a/arch/mips/tx4938/common/setup.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/setup.c - * - * common tx4938 setup routines - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/irq.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/tx4938/rbtx4938.h> - -extern void toshiba_rbtx4938_setup(void); - -void __init tx4938_setup(void); -void dump_cp0(char *key); - -void __init -plat_mem_setup(void) -{ - toshiba_rbtx4938_setup(); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c index 69f21c1b794..1644bffa501 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/prom.c @@ -47,7 +47,6 @@ void __init prom_init(void) #ifndef CONFIG_TX4938_NAND_BOOT prom_init_cmdline(); #endif - mips_machtype = MACH_TOSHIBA_RBTX4938; msize = tx4938_get_mem_size(); add_memory_region(0, msize << 20, BOOT_MEM_RAM); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index 632e5d20135..61249f049cd 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -24,16 +24,12 @@ #include <asm/wbflush.h> #include <asm/reboot.h> -#include <asm/irq.h> #include <asm/time.h> #include <asm/txx9tmr.h> -#include <asm/uaccess.h> #include <asm/io.h> #include <asm/bootinfo.h> #include <asm/tx4938/rbtx4938.h> #ifdef CONFIG_SERIAL_TXX9 -#include <linux/tty.h> -#include <linux/serial.h> #include <linux/serial_core.h> #endif #include <linux/spi/spi.h> @@ -728,6 +724,8 @@ void __init tx4938_board_setup(void) /* CCFG */ /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; + /* do reset on watchdog */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; /* clear PCIC1 reset */ if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; @@ -855,7 +853,7 @@ void __init plat_time_init(void) txx9_gbus_clock / 2); } -void __init toshiba_rbtx4938_setup(void) +void __init plat_mem_setup(void) { unsigned long long pcfg; char *argptr; @@ -1125,12 +1123,35 @@ static int __init rbtx4938_spi_init(void) } arch_initcall(rbtx4938_spi_init); +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + .parent = &tx4938_reg_resource, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init rbtx4938_wdt_init(void) +{ + return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); +} +device_initcall(rbtx4938_wdt_init); + /* Minimum CLK support */ struct clk *clk_get(struct device *dev, const char *id) { if (!strcmp(id, "spi-baseclk")) return (struct clk *)(txx9_gbus_clock / 2 / 4); + if (!strcmp(id, "imbus_clk")) + return (struct clk *)(txx9_gbus_clock / 2); return ERR_PTR(-ENOENT); } EXPORT_SYMBOL(clk_get); diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index 8d760df686c..76d4b5ed3fc 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -40,6 +40,8 @@ void __init plat_time_init(void) { unsigned long tclock; + vr41xx_calculate_clock_frequency(); + tclock = vr41xx_get_tclock_frequency(); if (current_cpu_data.processor_id == PRID_VR4131_REV2_0 || current_cpu_data.processor_id == PRID_VR4131_REV2_1) @@ -50,8 +52,6 @@ void __init plat_time_init(void) void __init plat_mem_setup(void) { - vr41xx_calculate_clock_frequency(); - iomem_resource_init(); } diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c index 58e47686b49..7723d2011b0 100644 --- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c +++ b/arch/mips/vr41xx/nec-cmbvr4133/setup.c @@ -50,7 +50,7 @@ static struct mtd_partition cmbvr4133_mtd_parts[] = { } }; -#define number_partitions (sizeof(cmbvr4133_mtd_parts)/sizeof(struct mtd_partition)) +#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts) #endif extern void i8259_init(void); @@ -64,8 +64,6 @@ static void __init nec_cmbvr4133_setup(void) #endif set_io_port_base(KSEG1ADDR(0x16000000)); - mips_machtype = MACH_NEC_CMBVR4133; - #ifdef CONFIG_PCI #ifdef CONFIG_ROCKHOPPER ali_m5229_preinit(); diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index 0bb7a93b7a5..569f80aacbd 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -127,7 +127,7 @@ #define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p)) #define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) #define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \ - ((cm)<<59) | (a)) + (_CONST64_(cm) << 59) | (a)) /* * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h index 12e17581b82..608cfcfbb3e 100644 --- a/include/asm-mips/asm.h +++ b/include/asm-mips/asm.h @@ -398,4 +398,12 @@ symbol = value #define SSNOP sll zero, zero, 1 +#ifdef CONFIG_SGI_IP28 +/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ +#include <asm/cacheops.h> +#define R10KCBARRIER(addr) cache Cache_Barrier, addr; +#else +#define R10KCBARRIER(addr) +#endif + #endif /* __ASM_ASM_H */ diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index b2dd9b33de8..e031bdff992 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -48,22 +48,11 @@ #define MACH_DS5900 10 /* DECsystem 5900 */ /* - * Valid machtype for group ARC - */ -#define MACH_DESKSTATION_RPC44 0 /* Deskstation rPC44 */ -#define MACH_DESKSTATION_TYNE 1 /* Deskstation Tyne */ - -/* * Valid machtype for group SNI_RM */ #define MACH_SNI_RM200_PCI 0 /* RM200/RM300/RM400 PCI series */ /* - * Valid machtype for group ACN - */ -#define MACH_ACN_MIPS_BOARD 0 /* ACN MIPS single board */ - -/* * Valid machtype for group SGI */ #define MACH_SGI_IP22 0 /* Indy, Indigo2, Challenge S */ @@ -73,44 +62,6 @@ #define MACH_SGI_IP30 4 /* Octane, Octane2 */ /* - * Valid machtype for group COBALT - */ -#define MACH_COBALT_27 0 /* Proto "27" hardware */ - -/* - * Valid machtype for group BAGET - */ -#define MACH_BAGET201 0 /* BT23-201 */ -#define MACH_BAGET202 1 /* BT23-202 */ - -/* - * Cosine boards. - */ -#define MACH_COSINE_ORION 0 - -/* - * Valid machtype for group MOMENCO - */ -#define MACH_MOMENCO_OCELOT 0 -#define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */ -#define MACH_MOMENCO_OCELOT_C 2 /* no more supported (jun 2007) */ -#define MACH_MOMENCO_JAGUAR_ATX 3 /* no more supported (may 2007) */ -#define MACH_MOMENCO_OCELOT_3 4 - -/* - * Valid machtype for group PHILIPS - */ -#define MACH_PHILIPS_NINO 0 /* Nino */ -#define MACH_PHILIPS_VELO 1 /* Velo */ -#define MACH_PHILIPS_JBS 2 /* JBS */ -#define MACH_PHILIPS_STB810 3 /* STB810 */ - -/* - * Valid machtype for group SIBYTE - */ -#define MACH_SWARM 0 - -/* * Valid machtypes for group Toshiba */ #define MACH_PALLAS 0 @@ -122,64 +73,17 @@ #define MACH_TOSHIBA_RBTX4938 6 /* - * Valid machtype for group Alchemy - */ -#define MACH_PB1000 0 /* Au1000-based eval board */ -#define MACH_PB1100 1 /* Au1100-based eval board */ -#define MACH_PB1500 2 /* Au1500-based eval board */ -#define MACH_DB1000 3 /* Au1000-based eval board */ -#define MACH_DB1100 4 /* Au1100-based eval board */ -#define MACH_DB1500 5 /* Au1500-based eval board */ -#define MACH_XXS1500 6 /* Au1500-based eval board */ -#define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */ -#define MACH_PB1550 8 /* Au1550-based eval board */ -#define MACH_DB1550 9 /* Au1550-based eval board */ -#define MACH_PB1200 10 /* Au1200-based eval board */ -#define MACH_DB1200 11 /* Au1200-based eval board */ - -/* - * Valid machtype for group NEC_VR41XX - * - * Various NEC-based devices. - * - * FIXME: MACH_GROUPs should be by _MANUFACTURER_ of * the device, not by - * technical properties, so no new additions to this group. - */ -#define MACH_NEC_OSPREY 0 /* Osprey eval board */ -#define MACH_NEC_EAGLE 1 /* NEC Eagle/Hawk board */ -#define MACH_ZAO_CAPCELLA 2 /* ZAO Networks Capcella */ -#define MACH_VICTOR_MPC30X 3 /* Victor MP-C303/304 */ -#define MACH_IBM_WORKPAD 4 /* IBM WorkPad z50 */ -#define MACH_CASIO_E55 5 /* CASIO CASSIOPEIA E-10/15/55/65 */ -#define MACH_TANBAC_TB0226 6 /* TANBAC TB0226 (Mbase) */ -#define MACH_TANBAC_TB0229 7 /* TANBAC TB0229 (VR4131DIMM) */ -#define MACH_NEC_CMBVR4133 8 /* CMB VR4133 Board */ - -#define MACH_HP_LASERJET 1 - -/* * Valid machtype for group LASAT */ #define MACH_LASAT_100 0 /* Masquerade II/SP100/SP50/SP25 */ #define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */ /* - * Valid machtype for group TITAN - */ -#define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ -#define MACH_TITAN_EXCITE 2 /* Basler eXcite */ - -/* * Valid machtype for group NEC EMMA2RH */ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ /* - * Valid machtype for group LEMOTE - */ -#define MACH_LEMOTE_FULONG 0 - -/* * Valid machtype for group PMC-MSP */ #define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ @@ -190,16 +94,9 @@ #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ -#define MACH_WRPPMC 1 - -/* - * Valid machtype for group Broadcom - */ -#define MACH_GROUP_BRCM 23 /* Broadcom */ -#define MACH_BCM47XX 1 /* Broadcom BCM47XX */ - #define CL_SIZE COMMAND_LINE_SIZE +extern char *system_type; const char *get_system_type(void); extern unsigned long mips_machtype; diff --git a/include/asm-mips/bugs.h b/include/asm-mips/bugs.h index 0d7f9c1f554..9dc10df3207 100644 --- a/include/asm-mips/bugs.h +++ b/include/asm-mips/bugs.h @@ -1,19 +1,34 @@ /* * This is included by init/main.c to check for architecture-dependent bugs. * + * Copyright (C) 2007 Maciej W. Rozycki + * * Needs: * void check_bugs(void); */ #ifndef _ASM_BUGS_H #define _ASM_BUGS_H +#include <linux/bug.h> #include <linux/delay.h> + #include <asm/cpu.h> #include <asm/cpu-info.h> +extern int daddiu_bug; + +extern void check_bugs64_early(void); + extern void check_bugs32(void); extern void check_bugs64(void); +static inline void check_bugs_early(void) +{ +#ifdef CONFIG_64BIT + check_bugs64_early(); +#endif +} + static inline void check_bugs(void) { unsigned int cpu = smp_processor_id(); @@ -25,4 +40,14 @@ static inline void check_bugs(void) #endif } +static inline int r4k_daddiu_bug(void) +{ +#ifdef CONFIG_64BIT + WARN_ON(daddiu_bug < 0); + return daddiu_bug != 0; +#else + return 0; +#endif +} + #endif /* _ASM_BUGS_H */ diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h index ed5c02c6afb..0c5a358863f 100644 --- a/include/asm-mips/cpu-info.h +++ b/include/asm-mips/cpu-info.h @@ -55,6 +55,7 @@ struct cpuinfo_mips { struct cache_desc scache; /* Secondary cache */ struct cache_desc tcache; /* Tertiary/split secondary cache */ int srsets; /* Shadow register sets */ + int core; /* physical core number */ #if defined(CONFIG_MIPS_MT_SMTC) /* * In the MIPS MT "SMTC" model, each TC is considered @@ -63,8 +64,10 @@ struct cpuinfo_mips { * to all TCs within the same VPE. */ int vpe_id; /* Virtual Processor number */ - int tc_id; /* Thread Context number */ #endif /* CONFIG_MIPS_MT */ +#ifdef CONFIG_MIPS_MT_SMTC + int tc_id; /* Thread Context number */ +#endif void *data; /* Additional data */ } __attribute__((aligned(SMP_CACHE_BYTES))); diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 54fc18a4e5a..bf5bbc78a9f 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -195,8 +195,8 @@ enum cpu_type_enum { * MIPS32 class processors */ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000, - CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450, - CPU_BCM3302, CPU_BCM4710, + CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, CPU_AU1550, + CPU_PR4450, CPU_BCM3302, CPU_BCM4710, /* * MIPS64 class processors diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h index fab32131e9b..b0bccd2c4ed 100644 --- a/include/asm-mips/delay.h +++ b/include/asm-mips/delay.h @@ -6,13 +6,16 @@ * Copyright (C) 1994 by Waldorf Electronics * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki */ #ifndef _ASM_DELAY_H #define _ASM_DELAY_H #include <linux/param.h> #include <linux/smp.h> + #include <asm/compiler.h> +#include <asm/war.h> static inline void __delay(unsigned long loops) { @@ -25,7 +28,7 @@ static inline void __delay(unsigned long loops) " .set reorder \n" : "=r" (loops) : "0" (loops)); - else if (sizeof(long) == 8) + else if (sizeof(long) == 8 && !DADDI_WAR) __asm__ __volatile__ ( " .set noreorder \n" " .align 3 \n" @@ -34,6 +37,15 @@ static inline void __delay(unsigned long loops) " .set reorder \n" : "=r" (loops) : "0" (loops)); + else if (sizeof(long) == 8 && DADDI_WAR) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " dsubu %0, %2 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops), "r" (1)); } @@ -50,7 +62,7 @@ static inline void __delay(unsigned long loops) static inline void __udelay(unsigned long usecs, unsigned long lpj) { - unsigned long lo; + unsigned long hi, lo; /* * The rates of 128 is rounded wrongly by the catchall case @@ -70,11 +82,16 @@ static inline void __udelay(unsigned long usecs, unsigned long lpj) : "=h" (usecs), "=l" (lo) : "r" (usecs), "r" (lpj) : GCC_REG_ACCUM); - else if (sizeof(long) == 8) + else if (sizeof(long) == 8 && !R4000_WAR) __asm__("dmultu\t%2, %3" : "=h" (usecs), "=l" (lo) : "r" (usecs), "r" (lpj) : GCC_REG_ACCUM); + else if (sizeof(long) == 8 && R4000_WAR) + __asm__("dmultu\t%3, %4\n\tmfhi\t%0" + : "=r" (usecs), "=h" (hi), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); __delay(usecs); } diff --git a/include/asm-mips/dma.h b/include/asm-mips/dma.h index d6a6c21f16d..1353c81065d 100644 --- a/include/asm-mips/dma.h +++ b/include/asm-mips/dma.h @@ -84,10 +84,9 @@ * Deskstations or Acer PICA but not the much more versatile DMA logic used * for the local devices on Acer PICA or Magnums. */ -#ifdef CONFIG_SGI_IP22 -/* Horrible hack to have a correct DMA window on IP22 */ -#include <asm/sgi/mc.h> -#define MAX_DMA_ADDRESS (PAGE_OFFSET + SGIMC_SEG0_BADDR + 0x01000000) +#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28) +/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */ +#define MAX_DMA_ADDRESS PAGE_OFFSET #else #define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000) #endif diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h index f27b96cfac2..9cc8522a394 100644 --- a/include/asm-mips/fixmap.h +++ b/include/asm-mips/fixmap.h @@ -60,16 +60,6 @@ enum fixed_addresses { __end_of_fixed_addresses }; -extern void __set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); - -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) /* * used by vmalloc.c. * diff --git a/include/asm-mips/fw/cfe/cfe_api.h b/include/asm-mips/fw/cfe/cfe_api.h index 1003e7156bf..0995575db32 100644 --- a/include/asm-mips/fw/cfe/cfe_api.h +++ b/include/asm-mips/fw/cfe/cfe_api.h @@ -15,49 +15,27 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -/* ********************************************************************* - * - * Broadcom Common Firmware Environment (CFE) - * - * Device function prototypes File: cfe_api.h - * - * This file contains declarations for doing callbacks to - * cfe from an application. It should be the only header - * needed by the application to use this library - * - * Authors: Mitch Lichtenberg, Chris Demetriou - * - ********************************************************************* */ - +/* + * Broadcom Common Firmware Environment (CFE) + * + * This file contains declarations for doing callbacks to + * cfe from an application. It should be the only header + * needed by the application to use this library + * + * Authors: Mitch Lichtenberg, Chris Demetriou + */ #ifndef CFE_API_H #define CFE_API_H -/* - * Apply customizations here for different OSes. These need to: - * * typedef uint64_t, int64_t, intptr_t, uintptr_t. - * * define cfe_strlen() if use of an existing function is desired. - * * define CFE_API_IMPL_NAMESPACE if API functions are to use - * names in the implementation namespace. - * Also, optionally, if the build environment does not do so automatically, - * CFE_API_* can be defined here as desired. - */ -/* Begin customization. */ #include <linux/types.h> #include <linux/string.h> typedef long intptr_t; -#define cfe_strlen strlen -#define CFE_API_ALL -#define CFE_API_STRLEN_CUSTOM -/* End customization. */ - - -/* ********************************************************************* - * Constants - ********************************************************************* */ +/* + * Constants + */ /* Seal indicating CFE's presence, passed to user program. */ #define CFE_EPTSEAL 0x43464531 @@ -109,54 +87,13 @@ typedef struct { /* - * cfe_strlen is handled specially: If already defined, it has been - * overridden in this environment with a standard strlen-like function. - */ -#ifdef cfe_strlen -# define CFE_API_STRLEN_CUSTOM -#else -# ifdef CFE_API_IMPL_NAMESPACE -# define cfe_strlen(a) __cfe_strlen(a) -# endif -int cfe_strlen(char *name); -#endif - -/* * Defines and prototypes for functions which take no arguments. */ -#ifdef CFE_API_IMPL_NAMESPACE -int64_t __cfe_getticks(void); -#define cfe_getticks() __cfe_getticks() -#else int64_t cfe_getticks(void); -#endif /* * Defines and prototypes for the rest of the functions. */ -#ifdef CFE_API_IMPL_NAMESPACE -#define cfe_close(a) __cfe_close(a) -#define cfe_cpu_start(a, b, c, d, e) __cfe_cpu_start(a, b, c, d, e) -#define cfe_cpu_stop(a) __cfe_cpu_stop(a) -#define cfe_enumenv(a, b, d, e, f) __cfe_enumenv(a, b, d, e, f) -#define cfe_enummem(a, b, c, d, e) __cfe_enummem(a, b, c, d, e) -#define cfe_exit(a, b) __cfe_exit(a, b) -#define cfe_flushcache(a) __cfe_cacheflush(a) -#define cfe_getdevinfo(a) __cfe_getdevinfo(a) -#define cfe_getenv(a, b, c) __cfe_getenv(a, b, c) -#define cfe_getfwinfo(a) __cfe_getfwinfo(a) -#define cfe_getstdhandle(a) __cfe_getstdhandle(a) -#define cfe_init(a, b) __cfe_init(a, b) -#define cfe_inpstat(a) __cfe_inpstat(a) -#define cfe_ioctl(a, b, c, d, e, f) __cfe_ioctl(a, b, c, d, e, f) -#define cfe_open(a) __cfe_open(a) -#define cfe_read(a, b, c) __cfe_read(a, b, c) -#define cfe_readblk(a, b, c, d) __cfe_readblk(a, b, c, d) -#define cfe_setenv(a, b) __cfe_setenv(a, b) -#define cfe_write(a, b, c) __cfe_write(a, b, c) -#define cfe_writeblk(a, b, c, d) __cfe_writeblk(a, b, c, d) -#endif /* CFE_API_IMPL_NAMESPACE */ - int cfe_close(int handle); int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1); int cfe_cpu_stop(int cpu); diff --git a/include/asm-mips/fw/cfe/cfe_error.h b/include/asm-mips/fw/cfe/cfe_error.h index 975f00002cb..b8037463627 100644 --- a/include/asm-mips/fw/cfe/cfe_error.h +++ b/include/asm-mips/fw/cfe/cfe_error.h @@ -16,18 +16,13 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -/* ********************************************************************* - * - * Broadcom Common Firmware Environment (CFE) - * - * Error codes File: cfe_error.h - * - * CFE's global error code list is here. - * - * Author: Mitch Lichtenberg - * - ********************************************************************* */ - +/* + * Broadcom Common Firmware Environment (CFE) + * + * CFE's global error code list is here. + * + * Author: Mitch Lichtenberg + */ #define CFE_OK 0 #define CFE_ERR -1 /* generic error */ diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h index a79e7caf3a8..5b9fce73f11 100644 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ b/include/asm-mips/mach-cobalt/cobalt.h @@ -1,5 +1,5 @@ /* - * Lowlevel hardware stuff for the MIPS based Cobalt microservers. + * The Cobalt board ID information. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,9 +12,6 @@ #ifndef __ASM_COBALT_H #define __ASM_COBALT_H -/* - * The Cobalt board ID information. - */ extern int cobalt_board_id; #define COBALT_BRD_ID_QUBE1 0x3 @@ -22,14 +19,4 @@ extern int cobalt_board_id; #define COBALT_BRD_ID_QUBE2 0x5 #define COBALT_BRD_ID_RAQ2 0x6 -#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK) -# define COBALT_KEY_CLEAR (1 << 1) -# define COBALT_KEY_LEFT (1 << 2) -# define COBALT_KEY_UP (1 << 3) -# define COBALT_KEY_DOWN (1 << 4) -# define COBALT_KEY_RIGHT (1 << 5) -# define COBALT_KEY_ENTER (1 << 6) -# define COBALT_KEY_SELECT (1 << 7) -# define COBALT_KEY_MASK 0xfe - #endif /* __ASM_COBALT_H */ diff --git a/include/asm-mips/mach-ip28/cpu-feature-overrides.h b/include/asm-mips/mach-ip28/cpu-feature-overrides.h new file mode 100644 index 00000000000..9a53b326f84 --- /dev/null +++ b/include/asm-mips/mach-ip28/cpu-feature-overrides.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + * 6/2004 pf + */ +#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H + +/* + * IP28 only comes with R10000 family processors all using the same config + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 /* see probe_pcache() */ +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 + +#define cpu_has_inclusive_pcaches 1 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 64 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-ip28/ds1286.h b/include/asm-mips/mach-ip28/ds1286.h new file mode 100644 index 00000000000..471bb9a33e0 --- /dev/null +++ b/include/asm-mips/mach-ip28/ds1286.h @@ -0,0 +1,4 @@ +#ifndef __ASM_MACH_IP28_DS1286_H +#define __ASM_MACH_IP28_DS1286_H +#include <asm/mach-ip22/ds1286.h> +#endif /* __ASM_MACH_IP28_DS1286_H */ diff --git a/include/asm-mips/mach-ip28/spaces.h b/include/asm-mips/mach-ip28/spaces.h new file mode 100644 index 00000000000..05aabb27e5e --- /dev/null +++ b/include/asm-mips/mach-ip28/spaces.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + * 2004 pf + */ +#ifndef _ASM_MACH_IP28_SPACES_H +#define _ASM_MACH_IP28_SPACES_H + +#define CAC_BASE 0xa800000000000000 + +#define HIGHMEM_START (~0UL) + +#define PHYS_OFFSET _AC(0x20000000, UL) + +#include <asm/mach-generic/spaces.h> + +#endif /* _ASM_MACH_IP28_SPACES_H */ diff --git a/include/asm-mips/mach-qemu/war.h b/include/asm-mips/mach-ip28/war.h index 0eaf0c548a4..a1baafab486 100644 --- a/include/asm-mips/mach-qemu/war.h +++ b/include/asm-mips/mach-ip28/war.h @@ -5,8 +5,8 @@ * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> */ -#ifndef __ASM_MIPS_MACH_QEMU_WAR_H -#define __ASM_MIPS_MACH_QEMU_WAR_H +#ifndef __ASM_MIPS_MACH_IP28_WAR_H +#define __ASM_MIPS_MACH_IP28_WAR_H #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 @@ -19,7 +19,7 @@ #define TX49XX_ICACHE_INDEX_INV_WAR 0 #define RM9000_CDEX_SMP_WAR 0 #define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 +#define R10000_LLSC_WAR 1 #define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_QEMU_WAR_H */ +#endif /* __ASM_MIPS_MACH_IP28_WAR_H */ diff --git a/include/asm-mips/mach-qemu/cpu-feature-overrides.h b/include/asm-mips/mach-qemu/cpu-feature-overrides.h deleted file mode 100644 index d2daaed235d..00000000000 --- a/include/asm-mips/mach-qemu/cpu-feature-overrides.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 07 Ralf Baechle - */ -#ifndef __ASM_MACH_QEMU_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_QEMU_CPU_FEATURE_OVERRIDES_H - -/* - * QEMU only comes with a hazard-free MIPS32 processor, so things are easy. - */ -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_prefetch 0 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 0 - -#endif /* __ASM_MACH_QEMU_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index d5897748353..1c39d339521 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -97,10 +97,16 @@ extern int mips_revision_corid; extern int mips_revision_sconid; +extern void mips_reboot_setup(void); + #ifdef CONFIG_PCI extern void mips_pcibios_init(void); #else #define mips_pcibios_init() do { } while (0) #endif +#ifdef CONFIG_KGDB +extern void kgdb_config(void); +#endif + #endif /* __ASM_MIPS_BOARDS_GENERIC_H */ diff --git a/include/asm-mips/mipsprom.h b/include/asm-mips/mipsprom.h index ce7cff7f1e8..146d41b67ad 100644 --- a/include/asm-mips/mipsprom.h +++ b/include/asm-mips/mipsprom.h @@ -71,4 +71,6 @@ #define PROM_NV_GET 53 /* XXX */ #define PROM_NV_SET 54 /* XXX */ +extern char *prom_getenv(char *); + #endif /* __ASM_MIPS_PROM_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h index 0b56f55206c..603eb737b4a 100644 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h @@ -585,11 +585,7 @@ * UART defines * *************************************************************************** */ -#ifndef CONFIG_MSP_FPGA #define MSP_BASE_BAUD 25000000 -#else -#define MSP_BASE_BAUD 6000000 -#endif #define MSP_UART_REG_LEN 0x20 /* diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h index 2b8466ffd3c..4c140db3678 100644 --- a/include/asm-mips/r4kcache.h +++ b/include/asm-mips/r4kcache.h @@ -403,6 +403,13 @@ __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) +__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) +__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) + /* build blast_xxx_range, protected_blast_xxx_range */ #define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h index f3e3dc9bb73..343ed15f8dc 100644 --- a/include/asm-mips/sgi/ioc.h +++ b/include/asm-mips/sgi/ioc.h @@ -138,8 +138,8 @@ struct sgioc_regs { u8 _sysid[3]; volatile u8 sysid; #define SGIOC_SYSID_FULLHOUSE 0x01 -#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5) -#define SGIOC_SYSID_CHIPREV(x) ((x & 0x1e) > 1) +#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) +#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) u32 _unused2; u8 _read[3]; volatile u8 read; diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h index da198a1c8c8..25372ae0e81 100644 --- a/include/asm-mips/sibyte/board.h +++ b/include/asm-mips/sibyte/board.h @@ -19,10 +19,8 @@ #ifndef _SIBYTE_BOARD_H #define _SIBYTE_BOARD_H -#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \ - defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \ - defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \ - defined(CONFIG_SIBYTE_LITTLESUR) +#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \ + defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR) #include <asm/sibyte/swarm.h> #endif diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h index 0dad844a3b5..80c1a052662 100644 --- a/include/asm-mips/sibyte/sb1250.h +++ b/include/asm-mips/sibyte/sb1250.h @@ -48,12 +48,10 @@ extern unsigned int zbbus_mhz; extern void sb1250_time_init(void); extern void sb1250_mask_irq(int cpu, int irq); extern void sb1250_unmask_irq(int cpu, int irq); -extern void sb1250_smp_finish(void); extern void bcm1480_time_init(void); extern void bcm1480_mask_irq(int cpu, int irq); extern void bcm1480_unmask_irq(int cpu, int irq); -extern void bcm1480_smp_finish(void); #define AT_spin \ __asm__ __volatile__ ( \ diff --git a/include/asm-mips/sibyte/swarm.h b/include/asm-mips/sibyte/swarm.h index 540865fa7ec..114d9d29ca9 100644 --- a/include/asm-mips/sibyte/swarm.h +++ b/include/asm-mips/sibyte/swarm.h @@ -26,24 +26,6 @@ #define SIBYTE_HAVE_PCMCIA 1 #define SIBYTE_HAVE_IDE 1 #endif -#ifdef CONFIG_SIBYTE_PTSWARM -#define SIBYTE_BOARD_NAME "PTSWARM" -#define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 -#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200" -#endif -#ifdef CONFIG_SIBYTE_PT1120 -#define SIBYTE_BOARD_NAME "PT1120" -#define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 -#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200" -#endif -#ifdef CONFIG_SIBYTE_PT1125 -#define SIBYTE_BOARD_NAME "PT1125" -#define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 -#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200" -#endif #ifdef CONFIG_SIBYTE_LITTLESUR #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)" #define SIBYTE_HAVE_PCMCIA 0 diff --git a/include/asm-mips/smp-ops.h b/include/asm-mips/smp-ops.h new file mode 100644 index 00000000000..b17fdfb5d81 --- /dev/null +++ b/include/asm-mips/smp-ops.h @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) + * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2002 Ralf Baechle + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#ifndef __ASM_SMP_OPS_H +#define __ASM_SMP_OPS_H + +#ifdef CONFIG_SMP + +#include <linux/cpumask.h> + +struct plat_smp_ops { + void (*send_ipi_single)(int cpu, unsigned int action); + void (*send_ipi_mask)(cpumask_t mask, unsigned int action); + void (*init_secondary)(void); + void (*smp_finish)(void); + void (*cpus_done)(void); + void (*boot_secondary)(int cpu, struct task_struct *idle); + void (*smp_setup)(void); + void (*prepare_cpus)(unsigned int max_cpus); +}; + +extern void register_smp_ops(struct plat_smp_ops *ops); + +static inline void plat_smp_setup(void) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->smp_setup(); +} + +#else /* !CONFIG_SMP */ + +struct plat_smp_ops; + +static inline void plat_smp_setup(void) +{ + /* UP, nothing to do ... */ +} + +static inline void register_smp_ops(struct plat_smp_ops *ops) +{ +} + +#endif /* !CONFIG_SMP */ + +extern struct plat_smp_ops up_smp_ops; +extern struct plat_smp_ops vsmp_smp_ops; + +#endif /* __ASM_SMP_OPS_H */ diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h index dc770025a9b..84fef1aeec0 100644 --- a/include/asm-mips/smp.h +++ b/include/asm-mips/smp.h @@ -11,14 +11,16 @@ #ifndef __ASM_SMP_H #define __ASM_SMP_H - -#ifdef CONFIG_SMP - #include <linux/bitops.h> #include <linux/linkage.h> #include <linux/threads.h> #include <linux/cpumask.h> + #include <asm/atomic.h> +#include <asm/smp-ops.h> + +extern int smp_num_siblings; +extern cpumask_t cpu_sibling_map[]; #define raw_smp_processor_id() (current_thread_info()->cpu) @@ -49,56 +51,6 @@ extern struct call_data_struct *call_data; extern cpumask_t phys_cpu_present_map; #define cpu_possible_map phys_cpu_present_map -/* - * These are defined by the board-specific code. - */ - -/* - * Cause the function described by call_data to be executed on the passed - * cpu. When the function has finished, increment the finished field of - * call_data. - */ -extern void core_send_ipi(int cpu, unsigned int action); - -static inline void core_send_ipi_mask(cpumask_t mask, unsigned int action) -{ - unsigned int i; - - for_each_cpu_mask(i, mask) - core_send_ipi(i, action); -} - - -/* - * Firmware CPU startup hook - */ -extern void prom_boot_secondary(int cpu, struct task_struct *idle); - -/* - * After we've done initial boot, this function is called to allow the - * board code to clean up state, if needed - */ -extern void prom_init_secondary(void); - -/* - * Populate cpu_possible_map before smp_init, called from setup_arch. - */ -extern void plat_smp_setup(void); - -/* - * Called in smp_prepare_cpus. - */ -extern void plat_prepare_cpus(unsigned int max_cpus); - -/* - * Last chance for the board code to finish SMP initialization before - * the CPU is "online". - */ -extern void prom_smp_finish(void); - -/* Hook for after all CPUs are online */ -extern void prom_cpus_done(void); - extern void asmlinkage smp_bootstrap(void); /* @@ -108,11 +60,11 @@ extern void asmlinkage smp_bootstrap(void); */ static inline void smp_send_reschedule(int cpu) { - core_send_ipi(cpu, SMP_RESCHEDULE_YOURSELF); + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF); } extern asmlinkage void smp_call_function_interrupt(void); -#endif /* CONFIG_SMP */ - #endif /* __ASM_SMP_H */ diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h index af081457f84..e716447e5e0 100644 --- a/include/asm-mips/sni.h +++ b/include/asm-mips/sni.h @@ -35,23 +35,23 @@ extern unsigned int sni_brd_type; #define SNI_CPU_M8050 0x0b #define SNI_CPU_M8053 0x0d -#define SNI_PORT_BASE 0xb4000000 +#define SNI_PORT_BASE CKSEG1ADDR(0xb4000000) #ifndef __MIPSEL__ /* * ASIC PCI registers for big endian configuration. */ -#define PCIMT_UCONF 0xbfff0004 -#define PCIMT_IOADTIMEOUT2 0xbfff000c -#define PCIMT_IOMEMCONF 0xbfff0014 -#define PCIMT_IOMMU 0xbfff001c -#define PCIMT_IOADTIMEOUT1 0xbfff0024 -#define PCIMT_DMAACCESS 0xbfff002c -#define PCIMT_DMAHIT 0xbfff0034 -#define PCIMT_ERRSTATUS 0xbfff003c -#define PCIMT_ERRADDR 0xbfff0044 -#define PCIMT_SYNDROME 0xbfff004c -#define PCIMT_ITPEND 0xbfff0054 +#define PCIMT_UCONF CKSEG1ADDR(0xbfff0004) +#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff000c) +#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0014) +#define PCIMT_IOMMU CKSEG1ADDR(0xbfff001c) +#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0024) +#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff002c) +#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0034) +#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff003c) +#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0044) +#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff004c) +#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0054) #define IT_INT2 0x01 #define IT_INTD 0x02 #define IT_INTC 0x04 @@ -60,32 +60,32 @@ extern unsigned int sni_brd_type; #define IT_EISA 0x20 #define IT_SCSI 0x40 #define IT_ETH 0x80 -#define PCIMT_IRQSEL 0xbfff005c -#define PCIMT_TESTMEM 0xbfff0064 -#define PCIMT_ECCREG 0xbfff006c -#define PCIMT_CONFIG_ADDRESS 0xbfff0074 -#define PCIMT_ASIC_ID 0xbfff007c /* read */ -#define PCIMT_SOFT_RESET 0xbfff007c /* write */ -#define PCIMT_PIA_OE 0xbfff0084 -#define PCIMT_PIA_DATAOUT 0xbfff008c -#define PCIMT_PIA_DATAIN 0xbfff0094 -#define PCIMT_CACHECONF 0xbfff009c -#define PCIMT_INVSPACE 0xbfff00a4 +#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff005c) +#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0064) +#define PCIMT_ECCREG CKSEG1ADDR(0xbfff006c) +#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0074) +#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff007c) /* read */ +#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff007c) /* write */ +#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0084) +#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff008c) +#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0094) +#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff009c) +#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a4) #else /* * ASIC PCI registers for little endian configuration. */ -#define PCIMT_UCONF 0xbfff0000 -#define PCIMT_IOADTIMEOUT2 0xbfff0008 -#define PCIMT_IOMEMCONF 0xbfff0010 -#define PCIMT_IOMMU 0xbfff0018 -#define PCIMT_IOADTIMEOUT1 0xbfff0020 -#define PCIMT_DMAACCESS 0xbfff0028 -#define PCIMT_DMAHIT 0xbfff0030 -#define PCIMT_ERRSTATUS 0xbfff0038 -#define PCIMT_ERRADDR 0xbfff0040 -#define PCIMT_SYNDROME 0xbfff0048 -#define PCIMT_ITPEND 0xbfff0050 +#define PCIMT_UCONF CKSEG1ADDR(0xbfff0000) +#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff0008) +#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0010) +#define PCIMT_IOMMU CKSEG1ADDR(0xbfff0018) +#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0020) +#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff0028) +#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0030) +#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff0038) +#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0040) +#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff0048) +#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0050) #define IT_INT2 0x01 #define IT_INTD 0x02 #define IT_INTC 0x04 @@ -94,20 +94,20 @@ extern unsigned int sni_brd_type; #define IT_EISA 0x20 #define IT_SCSI 0x40 #define IT_ETH 0x80 -#define PCIMT_IRQSEL 0xbfff0058 -#define PCIMT_TESTMEM 0xbfff0060 -#define PCIMT_ECCREG 0xbfff0068 -#define PCIMT_CONFIG_ADDRESS 0xbfff0070 -#define PCIMT_ASIC_ID 0xbfff0078 /* read */ -#define PCIMT_SOFT_RESET 0xbfff0078 /* write */ -#define PCIMT_PIA_OE 0xbfff0080 -#define PCIMT_PIA_DATAOUT 0xbfff0088 -#define PCIMT_PIA_DATAIN 0xbfff0090 -#define PCIMT_CACHECONF 0xbfff0098 -#define PCIMT_INVSPACE 0xbfff00a0 +#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff0058) +#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0060) +#define PCIMT_ECCREG CKSEG1ADDR(0xbfff0068) +#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0070) +#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff0078) /* read */ +#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff0078) /* write */ +#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0080) +#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff0088) +#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0090) +#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff0098) +#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a0) #endif -#define PCIMT_PCI_CONF 0xbfff0100 +#define PCIMT_PCI_CONF CKSEG1ADDR(0xbfff0100) /* * Data port for the PCI bus in IO space @@ -117,34 +117,34 @@ extern unsigned int sni_brd_type; /* * Board specific registers */ -#define PCIMT_CSMSR 0xbfd00000 -#define PCIMT_CSSWITCH 0xbfd10000 -#define PCIMT_CSITPEND 0xbfd20000 -#define PCIMT_AUTO_PO_EN 0xbfd30000 -#define PCIMT_CLR_TEMP 0xbfd40000 -#define PCIMT_AUTO_PO_DIS 0xbfd50000 -#define PCIMT_EXMSR 0xbfd60000 -#define PCIMT_UNUSED1 0xbfd70000 -#define PCIMT_CSWCSM 0xbfd80000 -#define PCIMT_UNUSED2 0xbfd90000 -#define PCIMT_CSLED 0xbfda0000 -#define PCIMT_CSMAPISA 0xbfdb0000 -#define PCIMT_CSRSTBP 0xbfdc0000 -#define PCIMT_CLRPOFF 0xbfdd0000 -#define PCIMT_CSTIMER 0xbfde0000 -#define PCIMT_PWDN 0xbfdf0000 +#define PCIMT_CSMSR CKSEG1ADDR(0xbfd00000) +#define PCIMT_CSSWITCH CKSEG1ADDR(0xbfd10000) +#define PCIMT_CSITPEND CKSEG1ADDR(0xbfd20000) +#define PCIMT_AUTO_PO_EN CKSEG1ADDR(0xbfd30000) +#define PCIMT_CLR_TEMP CKSEG1ADDR(0xbfd40000) +#define PCIMT_AUTO_PO_DIS CKSEG1ADDR(0xbfd50000) +#define PCIMT_EXMSR CKSEG1ADDR(0xbfd60000) +#define PCIMT_UNUSED1 CKSEG1ADDR(0xbfd70000) +#define PCIMT_CSWCSM CKSEG1ADDR(0xbfd80000) +#define PCIMT_UNUSED2 CKSEG1ADDR(0xbfd90000) +#define PCIMT_CSLED CKSEG1ADDR(0xbfda0000) +#define PCIMT_CSMAPISA CKSEG1ADDR(0xbfdb0000) +#define PCIMT_CSRSTBP CKSEG1ADDR(0xbfdc0000) +#define PCIMT_CLRPOFF CKSEG1ADDR(0xbfdd0000) +#define PCIMT_CSTIMER CKSEG1ADDR(0xbfde0000) +#define PCIMT_PWDN CKSEG1ADDR(0xbfdf0000) /* * A20R based boards */ -#define A20R_PT_CLOCK_BASE 0xbc040000 -#define A20R_PT_TIM0_ACK 0xbc050000 -#define A20R_PT_TIM1_ACK 0xbc060000 +#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000) +#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000) +#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000) #define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE #define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) -#define SNI_PCIT_INT_REG 0xbfff000c +#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c) #define SNI_PCIT_INT_START 24 #define SNI_PCIT_INT_END 30 @@ -186,10 +186,30 @@ extern unsigned int sni_brd_type; /* * Base address for the mapped 16mb EISA bus segment. */ -#define PCIMT_EISA_BASE 0xb0000000 +#define PCIMT_EISA_BASE CKSEG1ADDR(0xb0000000) /* PCI EISA Interrupt acknowledge */ -#define PCIMT_INT_ACKNOWLEDGE 0xba000000 +#define PCIMT_INT_ACKNOWLEDGE CKSEG1ADDR(0xba000000) + +/* + * SNI ID PROM + * + * SNI_IDPROM_MEMSIZE Memsize in 16MB quantities + * SNI_IDPROM_BRDTYPE Board Type + * SNI_IDPROM_CPUTYPE CPU Type on RM400 + */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define __SNI_END 0 +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define __SNI_END 3 +#endif +#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000) +#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE + (0x28 ^ __SNI_END)) +#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE + (0x29 ^ __SNI_END)) +#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE + (0x30 ^ __SNI_END)) + +#define SNI_IDPROM_SIZE 0x1000 /* board specific init functions */ extern void sni_a20r_init(void); @@ -207,6 +227,9 @@ extern void sni_pcimt_irq_init(void); /* timer inits */ extern void sni_cpu_time_init(void); +/* eisa init for RM200/400 */ +extern int sni_eisa_root_init(void); + /* common irq stuff */ extern void (*sni_hwint)(void); extern struct irqaction sni_isa_irq; diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index fb41a8d7639..051e1af0bb9 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -6,6 +6,7 @@ * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle * Copyright (C) 1994, 1995, 1996 Paul M. Antoine. * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki */ #ifndef _ASM_STACKFRAME_H #define _ASM_STACKFRAME_H @@ -145,8 +146,16 @@ .set reorder /* Called from user mode, new stack. */ get_saved_sp +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS 8: move k0, sp PTR_SUBU sp, k1, PT_SIZE +#else + .set at=k0 +8: PTR_SUBU k1, PT_SIZE + .set noat + move k0, sp + move sp, k1 +#endif LONG_S k0, PT_R29(sp) LONG_S $3, PT_R3(sp) /* diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h index 7717934f94c..a8fd16e1981 100644 --- a/include/asm-mips/time.h +++ b/include/asm-mips/time.h @@ -31,20 +31,13 @@ extern int rtc_mips_set_time(unsigned long); extern int rtc_mips_set_mmss(unsigned long); /* - * Timer interrupt functions. - * mips_timer_state is needed for high precision timer calibration. - */ -extern int (*mips_timer_state)(void); - -/* * board specific routines required by time_init(). */ extern void plat_time_init(void); /* * mips_hpt_frequency - must be set if you intend to use an R4k-compatible - * counter as a timer interrupt source; otherwise it can be set up - * automagically with an aid of mips_timer_state. + * counter as a timer interrupt source. */ extern unsigned int mips_hpt_frequency; diff --git a/include/asm-mips/topology.h b/include/asm-mips/topology.h index 0440fb9f218..259145e07e9 100644 --- a/include/asm-mips/topology.h +++ b/include/asm-mips/topology.h @@ -1 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_TOPOLOGY_H +#define __ASM_TOPOLOGY_H + #include <topology.h> + +#ifdef CONFIG_SMP +#define smt_capable() (smp_num_siblings > 1) +#endif + +#endif /* __ASM_TOPOLOGY_H */ diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h index 3f1e470192e..0be77df70f2 100644 --- a/include/asm-mips/tx4927/tx4927_pci.h +++ b/include/asm-mips/tx4927/tx4927_pci.h @@ -9,6 +9,7 @@ #define __ASM_TX4927_TX4927_PCI_H #define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_WR 0x00008000 #define TX4927_CCFG_TINTDIS 0x01000000 #define TX4927_PCIMEM 0x08000000 diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index c30c718994c..66523d61095 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -5,6 +5,7 @@ * * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki */ #ifndef _ASM_UACCESS_H #define _ASM_UACCESS_H @@ -387,6 +388,12 @@ extern void __put_user_unknown(void); "jal\t" #destination "\n\t" #endif +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS +#define DADDI_SCRATCH "$0" +#else +#define DADDI_SCRATCH "$3" +#endif + extern size_t __copy_user(void *__to, const void *__from, size_t __n); #define __invoke_copy_to_user(to, from, n) \ @@ -403,7 +410,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ : \ : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - "memory"); \ + DADDI_SCRATCH, "memory"); \ __cu_len_r; \ }) @@ -512,7 +519,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ : \ : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - "memory"); \ + DADDI_SCRATCH, "memory"); \ __cu_len_r; \ }) @@ -535,7 +542,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ : \ : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - "memory"); \ + DADDI_SCRATCH, "memory"); \ __cu_len_r; \ }) diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h index d2808edfd4e..22361d5e3bf 100644 --- a/include/asm-mips/war.h +++ b/include/asm-mips/war.h @@ -4,6 +4,7 @@ * for more details. * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + * Copyright (C) 2007 Maciej W. Rozycki */ #ifndef _ASM_WAR_H #define _ASM_WAR_H @@ -11,6 +12,67 @@ #include <war.h> /* + * Work around certain R4000 CPU errata (as implemented by GCC): + * + * - A double-word or a variable shift may give an incorrect result + * if executed immediately after starting an integer division: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #28 + * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum + * #19 + * + * - A double-word or a variable shift may give an incorrect result + * if executed while an integer multiplication is in progress: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * errata #16 & #28 + * + * - An integer division may give an incorrect result if started in + * a delay slot of a taken branch or a jump: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #52 + */ +#ifdef CONFIG_CPU_R4000_WORKAROUNDS +#define R4000_WAR 1 +#else +#define R4000_WAR 0 +#endif + +/* + * Work around certain R4400 CPU errata (as implemented by GCC): + * + * - A double-word or a variable shift may give an incorrect result + * if executed immediately after starting an integer division: + * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10 + * "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4 + */ +#ifdef CONFIG_CPU_R4400_WORKAROUNDS +#define R4400_WAR 1 +#else +#define R4400_WAR 0 +#endif + +/* + * Work around the "daddi" and "daddiu" CPU errata: + * + * - The `daddi' instruction fails to trap on overflow. + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #23 + * + * - The `daddiu' instruction can produce an incorrect result. + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #41 + * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum + * #15 + * "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7 + * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5 + */ +#ifdef CONFIG_CPU_DADDI_WORKAROUNDS +#define DADDI_WAR 1 +#else +#define DADDI_WAR 0 +#endif + +/* * Another R4600 erratum. Due to the lack of errata information the exact * technical details aren't known. I've experimentally found that disabling * interrupts during indexed I-cache flushes seems to be sufficient to deal |