aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/00-INDEX2
-rw-r--r--Documentation/DocBook/Makefile2
-rw-r--r--Documentation/DocBook/kernel-api.tmpl13
-rw-r--r--Documentation/DocBook/mcabook.tmpl107
-rw-r--r--Documentation/devices.txt8
-rw-r--r--Documentation/eisa.txt2
-rw-r--r--Documentation/kernel-parameters.txt1
-rw-r--r--Documentation/mca.txt313
-rw-r--r--MAINTAINERS13
-rw-r--r--arch/frv/include/asm/processor.h1
-rw-r--r--arch/x86/Kconfig10
-rw-r--r--arch/x86/include/asm/mca.h43
-rw-r--r--arch/x86/include/asm/mca_dma.h201
-rw-r--r--arch/x86/include/asm/mpspec.h2
-rw-r--r--arch/x86/include/asm/mpspec_def.h3
-rw-r--r--arch/x86/kernel/Makefile1
-rw-r--r--arch/x86/kernel/acpi/boot.c2
-rw-r--r--arch/x86/kernel/apic/io_apic.c17
-rw-r--r--arch/x86/kernel/mca_32.c476
-rw-r--r--arch/x86/kernel/mpparse.c11
-rw-r--r--arch/x86/kernel/nmi.c12
-rw-r--r--arch/x86/kernel/setup.c8
-rw-r--r--arch/x86/kernel/time.c6
-rw-r--r--arch/x86/kernel/traps.c4
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/mca/Kconfig14
-rw-r--r--drivers/mca/Makefile7
-rw-r--r--drivers/mca/mca-bus.c169
-rw-r--r--drivers/mca/mca-device.c218
-rw-r--r--drivers/mca/mca-driver.c63
-rw-r--r--drivers/mca/mca-legacy.c329
-rw-r--r--drivers/mca/mca-proc.c249
-rw-r--r--drivers/message/i2o/i2o_proc.c13
-rw-r--r--include/linux/i2o-dev.h2
-rw-r--r--include/linux/mca-legacy.h66
-rw-r--r--include/linux/mca.h148
-rw-r--r--scripts/kconfig/mconf.c2
-rw-r--r--scripts/kconfig/nconf.c2
38 files changed, 15 insertions, 2526 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 2214f123a97..49c051380da 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -218,8 +218,6 @@ m68k/
- directory with info about Linux on Motorola 68k architecture.
magic-number.txt
- list of magic numbers used to mark/protect kernel data structures.
-mca.txt
- - info on supporting Micro Channel Architecture (e.g. PS/2) systems.
md.txt
- info on boot arguments for the multiple devices driver.
memory-barriers.txt
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 66725a3d30d..bc3d9f8c0a9 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
-DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
+DOCBOOKS := z8530book.xml device-drivers.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 7160652a873..00687ee9d36 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -212,19 +212,6 @@ X!Edrivers/pci/hotplug.c
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c
</sect1>
- <sect1><title>MCA Architecture</title>
- <sect2><title>MCA Device Functions</title>
- <para>
- Refer to the file arch/x86/kernel/mca_32.c for more information.
- </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Earch/x86/kernel/mca_32.c
--->
- </sect2>
- <sect2><title>MCA Bus DMA</title>
-!Iarch/x86/include/asm/mca_dma.h
- </sect2>
- </sect1>
</chapter>
<chapter id="firmware">
diff --git a/Documentation/DocBook/mcabook.tmpl b/Documentation/DocBook/mcabook.tmpl
deleted file mode 100644
index 467ccac6ec5..00000000000
--- a/Documentation/DocBook/mcabook.tmpl
+++ /dev/null
@@ -1,107 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="MCAGuide">
- <bookinfo>
- <title>MCA Driver Programming Interface</title>
-
- <authorgroup>
- <author>
- <firstname>Alan</firstname>
- <surname>Cox</surname>
- <affiliation>
- <address>
- <email>alan@lxorguk.ukuu.org.uk</email>
- </address>
- </affiliation>
- </author>
- <author>
- <firstname>David</firstname>
- <surname>Weinehall</surname>
- </author>
- <author>
- <firstname>Chris</firstname>
- <surname>Beauregard</surname>
- </author>
- </authorgroup>
-
- <copyright>
- <year>2000</year>
- <holder>Alan Cox</holder>
- <holder>David Weinehall</holder>
- <holder>Chris Beauregard</holder>
- </copyright>
-
- <legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
- <chapter id="intro">
- <title>Introduction</title>
- <para>
- The MCA bus functions provide a generalised interface to find MCA
- bus cards, to claim them for a driver, and to read and manipulate POS
- registers without being aware of the motherboard internals or
- certain deep magic specific to onboard devices.
- </para>
- <para>
- The basic interface to the MCA bus devices is the slot. Each slot
- is numbered and virtual slot numbers are assigned to the internal
- devices. Using a pci_dev as other busses do does not really make
- sense in the MCA context as the MCA bus resources require card
- specific interpretation.
- </para>
- <para>
- Finally the MCA bus functions provide a parallel set of DMA
- functions mimicing the ISA bus DMA functions as closely as possible,
- although also supporting the additional DMA functionality on the
- MCA bus controllers.
- </para>
- </chapter>
- <chapter id="bugs">
- <title>Known Bugs And Assumptions</title>
- <para>
- None.
- </para>
- </chapter>
-
- <chapter id="pubfunctions">
- <title>Public Functions Provided</title>
-!Edrivers/mca/mca-legacy.c
- </chapter>
-
- <chapter id="dmafunctions">
- <title>DMA Functions Provided</title>
-!Iarch/x86/include/asm/mca_dma.h
- </chapter>
-
-</book>
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 00383186d8f..c162be1c323 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -846,13 +846,7 @@ Your cooperation is appreciated.
...
31 = /dev/tap15 16th Ethertap device
- 36 block MCA ESDI hard disk
- 0 = /dev/eda First ESDI disk whole disk
- 64 = /dev/edb Second ESDI disk whole disk
- ...
-
- Partitions are handled in the same way as IDE disks
- (see major number 3).
+ 36 block OBSOLETE (was MCA ESDI hard disk)
37 char IDE tape
0 = /dev/ht0 First IDE tape
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 38cf0c7b559..a55e4910924 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -179,7 +179,7 @@ CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
Converting an EISA driver to the new API mostly involves *deleting*
code (since probing is now in the core EISA code). Unfortunately, most
-drivers share their probing routine between ISA, MCA and EISA. Special
+drivers share their probing routine between ISA, and EISA. Special
care must be taken when ripping out the EISA code, so other busses
won't suffer from these surgical strikes...
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1601e5a8b7..38cad53620c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -70,7 +70,6 @@ parameter is applicable:
M68k M68k architecture is enabled.
These options have more detailed description inside of
Documentation/m68k/kernel-options.txt.
- MCA MCA bus support is enabled.
MDA MDA console support is enabled.
MIPS MIPS architecture is enabled.
MOUSE Appropriate mouse support is enabled.
diff --git a/Documentation/mca.txt b/Documentation/mca.txt
deleted file mode 100644
index dfd130c2207..00000000000
--- a/Documentation/mca.txt
+++ /dev/null
@@ -1,313 +0,0 @@
-i386 Micro Channel Architecture Support
-=======================================
-
-MCA support is enabled using the CONFIG_MCA define. A machine with a MCA
-bus will have the kernel variable MCA_bus set, assuming the BIOS feature
-bits are set properly (see arch/i386/boot/setup.S for information on
-how this detection is done).
-
-Adapter Detection
-=================
-
-The ideal MCA adapter detection is done through the use of the
-Programmable Option Select registers. Generic functions for doing
-this have been added in include/linux/mca.h and arch/x86/kernel/mca_32.c.
-Everything needed to detect adapters and read (and write) configuration
-information is there. A number of MCA-specific drivers already use
-this. The typical probe code looks like the following:
-
- #include <linux/mca.h>
-
- unsigned char pos2, pos3, pos4, pos5;
- struct net_device* dev;
- int slot;
-
- if( MCA_bus ) {
- slot = mca_find_adapter( ADAPTER_ID, 0 );
- if( slot == MCA_NOTFOUND ) {
- return -ENODEV;
- }
- /* optional - see below */
- mca_set_adapter_name( slot, "adapter name & description" );
- mca_set_adapter_procfn( slot, dev_getinfo, dev );
-
- /* read the POS registers. Most devices only use 2 and 3 */
- pos2 = mca_read_stored_pos( slot, 2 );
- pos3 = mca_read_stored_pos( slot, 3 );
- pos4 = mca_read_stored_pos( slot, 4 );
- pos5 = mca_read_stored_pos( slot, 5 );
- } else {
- return -ENODEV;
- }
-
- /* extract configuration from pos[2345] and set everything up */
-
-Loadable modules should modify this to test that the specified IRQ and
-IO ports (plus whatever other stuff) match. See 3c523.c for example
-code (actually, smc-mca.c has a slightly more complex example that can
-handle a list of adapter ids).
-
-Keep in mind that devices should never directly access the POS registers
-(via inb(), outb(), etc). While it's generally safe, there is a small
-potential for blowing up hardware when it's done at the wrong time.
-Furthermore, accessing a POS register disables a device temporarily.
-This is usually okay during startup, but do _you_ want to rely on it?
-During initial configuration, mca_init() reads all the POS registers
-into memory. mca_read_stored_pos() accesses that data. mca_read_pos()
-and mca_write_pos() are also available for (safer) direct POS access,
-but their use is _highly_ discouraged. mca_write_pos() is particularly
-dangerous, as it is possible for adapters to be put in inconsistent
-states (i.e. sharing IO address, etc) and may result in crashes, toasted
-hardware, and blindness.
-
-User level drivers (such as the AGX X server) can use /proc/mca/pos to
-find adapters (see below).
-
-Some MCA adapters can also be detected via the usual ISA-style device
-probing (many SCSI adapters, for example). This sort of thing is highly
-discouraged. Perfectly good information is available telling you what's
-there, so there's no excuse for messing with random IO ports. However,
-we MCA people still appreciate any ISA-style driver that will work with
-our hardware. You take what you can get...
-
-Level-Triggered Interrupts
-==========================
-
-Because MCA uses level-triggered interrupts, a few problems arise with
-what might best be described as the ISA mindset and its effects on
-drivers. These sorts of problems are expected to become less common as
-more people use shared IRQs on PCI machines.
-
-In general, an interrupt must be acknowledged not only at the ICU (which
-is done automagically by the kernel), but at the device level. In
-particular, IRQ 0 must be reset after a timer interrupt (now done in
-arch/x86/kernel/time.c) or the first timer interrupt hangs the system.
-There were also problems with the 1.3.x floppy drivers, but that seems
-to have been fixed.
-
-IRQs are also shareable, and most MCA-specific devices should be coded
-with shared IRQs in mind.
-
-/proc/mca
-=========
-
-/proc/mca is a directory containing various files for adapters and
-other stuff.
-
- /proc/mca/pos Straight listing of POS registers
- /proc/mca/slot[1-8] Information on adapter in specific slot
- /proc/mca/video Same for integrated video
- /proc/mca/scsi Same for integrated SCSI
- /proc/mca/machine Machine information
-
-See Appendix A for a sample.
-
-Device drivers can easily add their own information function for
-specific slots (including integrated ones) via the
-mca_set_adapter_procfn() call. Drivers that support this are ESDI, IBM
-SCSI, and 3c523. If a device is also a module, make sure that the proc
-function is removed in the module cleanup. This will require storing
-the slot information in a private structure somewhere. See the 3c523
-driver for details.
-
-Your typical proc function will look something like this:
-
- static int
- dev_getinfo( char* buf, int slot, void* d ) {
- struct net_device* dev = (struct net_device*) d;
- int len = 0;
-
- len += sprintf( buf+len, "Device: %s\n", dev->name );
- len += sprintf( buf+len, "IRQ: %d\n", dev->irq );
- len += sprintf( buf+len, "IO Port: %#lx-%#lx\n", ... );
- ...
-
- return len;
- }
-
-Some of the standard MCA information will already be printed, so don't
-bother repeating it. Don't try putting in more than 3K of information.
-
-Enable this function with:
- mca_set_adapter_procfn( slot, dev_getinfo, dev );
-
-Disable it with:
- mca_set_adapter_procfn( slot, NULL, NULL );
-
-It is also recommended that, even if you don't write a proc function, to
-set the name of the adapter (i.e. "PS/2 ESDI Controller") via
-mca_set_adapter_name( int slot, char* name ).
-
-MCA Device Drivers
-==================
-
-Currently, there are a number of MCA-specific device drivers.
-
-1) PS/2 SCSI
- drivers/scsi/ibmmca.c
- drivers/scsi/ibmmca.h
- The driver for the IBM SCSI subsystem. Includes both integrated
- controllers and adapter cards. May require command-line arg
- "ibmmcascsi=io_port" to force detection of an adapter. If you have a
- machine with a front-panel display (i.e. model 95), you can use
- "ibmmcascsi=display" to enable a drive activity indicator.
-
-2) 3c523
- drivers/net/3c523.c
- drivers/net/3c523.h
- 3Com 3c523 Etherlink/MC ethernet driver.
-
-3) SMC Ultra/MCA and IBM Adapter/A
- drivers/net/smc-mca.c
- drivers/net/smc-mca.h
- Driver for the MCA version of the SMC Ultra and various other
- OEM'ed and work-alike cards (Elite, Adapter/A, etc).
-
-4) NE/2
- driver/net/ne2.c
- driver/net/ne2.h
- The NE/2 is the MCA version of the NE2000. This may not work
- with clones that have a different adapter id than the original
- NE/2.
-
-5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
- Reply Sound Blaster/SCSI (SCSI part)
- Better support for these cards than the driver for ISA.
- Supports multiple cards with IRQ sharing.
-
-Also added boot time option of scsi-probe, which can do reordering of
-SCSI host adapters. This will direct the kernel on the order which
-SCSI adapter should be detected. Example:
- scsi-probe=ibmmca,fd_mcs,adaptec1542,buslogic
-
-The serial drivers were modified to support the extended IO port range
-of the typical MCA system (also #ifdef CONFIG_MCA).
-
-The following devices work with existing drivers:
-1) Token-ring
-2) Future Domain SCSI (MCS-600, MCS-700, not MCS-350, OEM'ed IBM SCSI)
-3) Adaptec 1640 SCSI (using the aha1542 driver)
-4) Bustek/Buslogic SCSI (various)
-5) Probably all Arcnet cards.
-6) Some, possibly all, MCA IDE controllers.
-7) 3Com 3c529 (MCA version of 3c509) (patched)
-
-8) Intel EtherExpressMC (patched version)
- You need to have CONFIG_MCA defined to have EtherExpressMC support.
-9) Reply Sound Blaster/SCSI (SB part) (patched version)
-
-Bugs & Other Weirdness
-======================
-
-NMIs tend to occur with MCA machines because of various hardware
-weirdness, bus timeouts, and many other non-critical things. Some basic
-code to handle them (inspired by the NetBSD MCA code) has been added to
-detect the guilty device, but it's pretty incomplete. If NMIs are a
-persistent problem (on some model 70 or 80s, they occur every couple
-shell commands), the CONFIG_IGNORE_NMI flag will take care of that.
-
-Various Pentium machines have had serious problems with the FPU test in
-bugs.h. Basically, the machine hangs after the HLT test. This occurs,
-as far as we know, on the Pentium-equipped 85s, 95s, and some PC Servers.
-The PCI/MCA PC 750s are fine as far as I can tell. The ``mca-pentium''
-boot-prompt flag will disable the FPU bug check if this is a problem
-with your machine.
-
-The model 80 has a raft of problems that are just too weird and unique
-to get into here. Some people have no trouble while others have nothing
-but problems. I'd suspect some problems are related to the age of the
-average 80 and accompanying hardware deterioration, although others
-are definitely design problems with the hardware. Among the problems
-include SCSI controller problems, ESDI controller problems, and serious
-screw-ups in the floppy controller. Oh, and the parallel port is also
-pretty flaky. There were about 5 or 6 different model 80 motherboards
-produced to fix various obscure problems. As far as I know, it's pretty
-much impossible to tell which bugs a particular model 80 has (other than
-triggering them, that is).
-
-Drivers are required for some MCA memory adapters. If you're suddenly
-short a few megs of RAM, this might be the reason. The (I think) Enhanced
-Memory Adapter commonly found on the model 70 is one. There's a very
-alpha driver floating around, but it's pretty ugly (disassembled from
-the DOS driver, actually). See the MCA Linux web page (URL below)
-for more current memory info.
-
-The Thinkpad 700 and 720 will work, but various components are either
-non-functional, flaky, or we don't know anything about them. The
-graphics controller is supposed to be some WD, but we can't get things
-working properly. The PCMCIA slots don't seem to work. Ditto for APM.
-The serial ports work, but detection seems to be flaky.
-
-Credits
-=======
-A whole pile of people have contributed to the MCA code. I'd include
-their names here, but I don't have a list handy. Check the MCA Linux
-home page (URL below) for a perpetually out-of-date list.
-
-=====================================================================
-MCA Linux Home Page: http://www.dgmicro.com/mca/
-
-Christophe Beauregard
-chrisb@truespectra.com
-cpbeaure@calum.csclub.uwaterloo.ca
-
-=====================================================================
-Appendix A: Sample /proc/mca
-
-This is from my model 8595. Slot 1 contains the standard IBM SCSI
-adapter, slot 3 is an Adaptec AHA-1640, slot 5 is a XGA-1 video adapter,
-and slot 7 is the 3c523 Etherlink/MC.
-
-/proc/mca/machine:
-Model Id: 0xf8
-Submodel Id: 0x14
-BIOS Revision: 0x5
-
-/proc/mca/pos:
-Slot 1: ff 8e f1 fc a0 ff ff ff IBM SCSI Adapter w/Cache
-Slot 2: ff ff ff ff ff ff ff ff
-Slot 3: 1f 0f 81 3b bf b6 ff ff
-Slot 4: ff ff ff ff ff ff ff ff
-Slot 5: db 8f 1d 5e fd c0 00 00
-Slot 6: ff ff ff ff ff ff ff ff
-Slot 7: 42 60 ff 08 ff ff ff ff 3Com 3c523 Etherlink/MC
-Slot 8: ff ff ff ff ff ff ff ff
-Video : ff ff ff ff ff ff ff ff
-SCSI : ff ff ff ff ff ff ff ff
-
-/proc/mca/slot1:
-Slot: 1
-Adapter Name: IBM SCSI Adapter w/Cache
-Id: 8eff
-Enabled: Yes
-POS: ff 8e f1 fc a0 ff ff ff
-Subsystem PUN: 7
-Detected at boot: Yes
-
-/proc/mca/slot3:
-Slot: 3
-Adapter Name: Unknown
-Id: 0f1f
-Enabled: Yes
-POS: 1f 0f 81 3b bf b6 ff ff
-
-/proc/mca/slot5:
-Slot: 5
-Adapter Name: Unknown
-Id: 8fdb
-Enabled: Yes
-POS: db 8f 1d 5e fd c0 00 00
-
-/proc/mca/slot7:
-Slot: 7
-Adapter Name: 3Com 3c523 Etherlink/MC
-Id: 6042
-Enabled: Yes
-POS: 42 60 ff 08 ff ff ff ff
-Revision: 0xe
-IRQ: 9
-IO Address: 0x3300-0x3308
-Memory: 0xd8000-0xdbfff
-Transceiver: External
-Device: eth0
-Hardware Address: 02 60 8c 45 c4 2a
diff --git a/MAINTAINERS b/MAINTAINERS
index 490dd6e640a..9fa728b53d4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3316,12 +3316,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
S: Maintained
F: arch/ia64/
-IBM MCA SCSI SUBSYSTEM DRIVER
-M: Michael Lang <langa2@kph.uni-mainz.de>
-W: http://www.uni-mainz.de/~langm000/linux.html
-S: Maintained
-F: drivers/scsi/ibmmca.c
-
IBM Power Linux RAID adapter
M: Brian King <brking@us.ibm.com>
S: Supported
@@ -4418,13 +4412,6 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
F: arch/microblaze/
-MICROCHANNEL ARCHITECTURE (MCA)
-M: James Bottomley <James.Bottomley@HansenPartnership.com>
-S: Maintained
-F: Documentation/mca.txt
-F: drivers/mca/
-F: include/linux/mca*
-
MICROTEK X6 SCANNER
M: Oliver Neukum <oliver@neukum.name>
S: Maintained
diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h
index 81c2e271d62..4a53811cd4c 100644
--- a/arch/frv/include/asm/processor.h
+++ b/arch/frv/include/asm/processor.h
@@ -54,7 +54,6 @@ extern struct cpuinfo_frv __nongprelbss boot_cpu_data;
* Bus types
*/
#define EISA_bus 0
-#define MCA_bus 0
struct thread_struct {
struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c9866b0b77d..9137057152c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2023,16 +2023,6 @@ config EISA
source "drivers/eisa/Kconfig"
-config MCA
- bool "MCA support"
- ---help---
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-source "drivers/mca/Kconfig"
-
config SCx200
tristate "NatSemi SCx200 support"
---help---
diff --git a/arch/x86/include/asm/mca.h b/arch/x86/include/asm/mca.h
deleted file mode 100644
index eedbb6cc1ef..00000000000
--- a/arch/x86/include/asm/mca.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Platform specific MCA defines */
-#ifndef _ASM_X86_MCA_H
-#define _ASM_X86_MCA_H
-
-/* Maximal number of MCA slots - actually, some machines have less, but
- * they all have sufficient number of POS registers to cover 8.
- */
-#define MCA_MAX_SLOT_NR 8
-
-/* Most machines have only one MCA bus. The only multiple bus machines
- * I know have at most two */
-#define MAX_MCA_BUSSES 2
-
-#define MCA_PRIMARY_BUS 0
-#define MCA_SECONDARY_BUS 1
-
-/* Dummy slot numbers on primary MCA for integrated functions */
-#define MCA_INTEGSCSI (MCA_MAX_SLOT_NR)
-#define MCA_INTEGVIDEO (MCA_MAX_SLOT_NR+1)
-#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
-
-/* Dummy POS values for integrated functions */
-#define MCA_DUMMY_POS_START 0x10000
-#define MCA_INTEGSCSI_POS (MCA_DUMMY_POS_START+1)
-#define MCA_INTEGVIDEO_POS (MCA_DUMMY_POS_START+2)
-#define MCA_MOTHERBOARD_POS (MCA_DUMMY_POS_START+3)
-
-/* MCA registers */
-
-#define MCA_MOTHERBOARD_SETUP_REG 0x94
-#define MCA_ADAPTER_SETUP_REG 0x96
-#define MCA_POS_REG(n) (0x100+(n))
-
-#define MCA_ENABLED 0x01 /* POS 2, set if adapter enabled */
-
-/* Max number of adapters, including both slots and various integrated
- * things.
- */
-#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
-
-#endif /* _ASM_X86_MCA_H */
diff --git a/arch/x86/include/asm/mca_dma.h b/arch/x86/include/asm/mca_dma.h
deleted file mode 100644
index 45271aef82d..00000000000
--- a/arch/x86/include/asm/mca_dma.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef _ASM_X86_MCA_DMA_H
-#define _ASM_X86_MCA_DMA_H
-
-#include <asm/io.h>
-#include <linux/ioport.h>
-
-/*
- * Microchannel specific DMA stuff. DMA on an MCA machine is fairly similar to
- * standard PC dma, but it certainly has its quirks. DMA register addresses
- * are in a different place and there are some added functions. Most of this
- * should be pretty obvious on inspection. Note that the user must divide
- * count by 2 when using 16-bit dma; that is not handled by these functions.
- *
- * Ramen Noodles are yummy.
- *
- * 1998 Tymm Twillman <tymm@computer.org>
- */
-
-/*
- * Registers that are used by the DMA controller; FN is the function register
- * (tell the controller what to do) and EXE is the execution register (how
- * to do it)
- */
-
-#define MCA_DMA_REG_FN 0x18
-#define MCA_DMA_REG_EXE 0x1A
-
-/*
- * Functions that the DMA controller can do
- */
-
-#define MCA_DMA_FN_SET_IO 0x00
-#define MCA_DMA_FN_SET_ADDR 0x20
-#define MCA_DMA_FN_GET_ADDR 0x30
-#define MCA_DMA_FN_SET_COUNT 0x40
-#define MCA_DMA_FN_GET_COUNT 0x50
-#define MCA_DMA_FN_GET_STATUS 0x60
-#define MCA_DMA_FN_SET_MODE 0x70
-#define MCA_DMA_FN_SET_ARBUS 0x80
-#define MCA_DMA_FN_MASK 0x90
-#define MCA_DMA_FN_RESET_MASK 0xA0
-#define MCA_DMA_FN_MASTER_CLEAR 0xD0
-
-/*
- * Modes (used by setting MCA_DMA_FN_MODE in the function register)
- *
- * Note that the MODE_READ is read from memory (write to device), and
- * MODE_WRITE is vice-versa.
- */
-
-#define MCA_DMA_MODE_XFER 0x04 /* read by default */
-#define MCA_DMA_MODE_READ 0x04 /* same as XFER */
-#define MCA_DMA_MODE_WRITE 0x08 /* OR with MODE_XFER to use */
-#define MCA_DMA_MODE_IO 0x01 /* DMA from IO register */
-#define MCA_DMA_MODE_16 0x40 /* 16 bit xfers */
-
-
-/**
- * mca_enable_dma - channel to enable DMA on
- * @dmanr: DMA channel
- *
- * Enable the MCA bus DMA on a channel. This can be called from
- * IRQ context.
- */
-
-static inline void mca_enable_dma(unsigned int dmanr)
-{
- outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- * mca_disble_dma - channel to disable DMA on
- * @dmanr: DMA channel
- *
- * Enable the MCA bus DMA on a channel. This can be called from
- * IRQ context.
- */
-
-static inline void mca_disable_dma(unsigned int dmanr)
-{
- outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- * mca_set_dma_addr - load a 24bit DMA address
- * @dmanr: DMA channel
- * @a: 24bit bus address
- *
- * Load the address register in the DMA controller. This has a 24bit
- * limitation (16Mb).
- */
-
-static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
- outb(a & 0xff, MCA_DMA_REG_EXE);
- outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
- outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- * mca_get_dma_addr - load a 24bit DMA address
- * @dmanr: DMA channel
- *
- * Read the address register in the DMA controller. This has a 24bit
- * limitation (16Mb). The return is a bus address.
- */
-
-static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
-{
- unsigned int addr;
-
- outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
- addr = inb(MCA_DMA_REG_EXE);
- addr |= inb(MCA_DMA_REG_EXE) << 8;
- addr |= inb(MCA_DMA_REG_EXE) << 16;
-
- return addr;
-}
-
-/**
- * mca_set_dma_count - load a 16bit transfer count
- * @dmanr: DMA channel
- * @count: count
- *
- * Set the DMA count for this channel. This can be up to 64Kbytes.
- * Setting a count of zero will not do what you expect.
- */
-
-static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--; /* transfers one more than count -- correct for this */
-
- outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
- outb(count & 0xff, MCA_DMA_REG_EXE);
- outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- * mca_get_dma_residue - get the remaining bytes to transfer
- * @dmanr: DMA channel
- *
- * This function returns the number of bytes left to transfer
- * on this DMA channel.
- */
-
-static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
-{
- unsigned short count;
-
- outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
- count = 1 + inb(MCA_DMA_REG_EXE);
- count += inb(MCA_DMA_REG_EXE) << 8;
-
- return count;
-}
-
-/**
- * mca_set_dma_io - set the port for an I/O transfer
- * @dmanr: DMA channel
- * @io_addr: an I/O port number
- *
- * Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
- * with an I/O port target.
- */
-
-static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
-{
- /*
- * DMA from a port address -- set the io address
- */
-
- outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
- outb(io_addr & 0xff, MCA_DMA_REG_EXE);
- outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- * mca_set_dma_mode - set the DMA mode
- * @dmanr: DMA channel
- * @mode: mode to set
- *
- * The DMA controller supports several modes. The mode values you can
- * set are-
- *
- * %MCA_DMA_MODE_READ when reading from the DMA device.
- *
- * %MCA_DMA_MODE_WRITE to writing to the DMA device.
- *
- * %MCA_DMA_MODE_IO to do DMA to or from an I/O port.
- *
- * %MCA_DMA_MODE_16 to do 16bit transfers.
- */
-
-static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
- outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
- outb(mode, MCA_DMA_REG_EXE);
-}
-
-#endif /* _ASM_X86_MCA_DMA_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 9c7d95f6174..3e2f42a4b87 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -40,7 +40,7 @@ extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
#endif /* CONFIG_X86_64 */
-#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
+#ifdef CONFIG_EISA
extern int mp_bus_id_to_type[MAX_MP_BUSSES];
#endif
diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
index c0a955a9a08..b31f8c09827 100644
--- a/arch/x86/include/asm/mpspec_def.h
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -84,7 +84,7 @@ struct mpc_bus {
#define BUSTYPE_EISA "EISA"
#define BUSTYPE_ISA "ISA"
#define BUSTYPE_INTERN "INTERN" /* Internal BUS */
-#define BUSTYPE_MCA "MCA"
+#define BUSTYPE_MCA "MCA" /* Obsolete */
#define BUSTYPE_VL "VL" /* Local bus */
#define BUSTYPE_PCI "PCI"
#define BUSTYPE_PCMCIA "PCMCIA"
@@ -169,6 +169,5 @@ enum mp_bustype {
MP_BUS_ISA = 1,
MP_BUS_EISA,
MP_BUS_PCI,
- MP_BUS_MCA,
};
#endif /* _ASM_X86_MPSPEC_DEF_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 532d2e090e6..7d156994720 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -49,7 +49,6 @@ obj-y += cpu/
obj-y += acpi/
obj-y += reboot.o
obj-$(CONFIG_X86_32) += reboot_32.o
-obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_PCI) += early-quirks.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index a415b1f4436..f564b189de1 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -990,7 +990,7 @@ void __init mp_config_acpi_legacy_irqs(void)
int i;
struct mpc_intsrc mp_irq;
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
/*
* Fabricate the legacy ISA bus (bus #31).
*/
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e88300d8e80..675e9045a3c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -142,7 +142,7 @@ int mp_irq_entries;
/* GSI interrupts */
static int nr_irqs_gsi = NR_IRQS_LEGACY;
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
int mp_bus_id_to_type[MAX_MP_BUSSES];
#endif
@@ -875,7 +875,7 @@ static int __init find_isa_irq_apic(int irq, int type)
return -1;
}
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
/*
* EISA Edge/Level control register, ELCR
*/
@@ -912,12 +912,6 @@ static int EISA_ELCR(unsigned int irq)
#define default_PCI_trigger(idx) (1)
#define default_PCI_polarity(idx) (1)
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx) (1)
-#define default_MCA_polarity(idx) default_ISA_polarity(idx)
-
static int irq_polarity(int idx)
{
int bus = mp_irqs[idx].srcbus;
@@ -975,7 +969,7 @@ static int irq_trigger(int idx)
trigger = default_ISA_trigger(idx);
else
trigger = default_PCI_trigger(idx);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
switch (mp_bus_id_to_type[bus]) {
case MP_BUS_ISA: /* ISA pin */
{
@@ -992,11 +986,6 @@ static int irq_trigger(int idx)
/* set before the switch */
break;
}
- case MP_BUS_MCA: /* MCA pin */
- {
- trigger = default_MCA_trigger(idx);
- break;
- }
default:
{
printk(KERN_WARNING "broken BIOS!!\n");
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
deleted file mode 100644
index 7eb1e2b9782..00000000000
--- a/arch/x86/kernel/mca_32.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * Written by Martin Kolinek, February 1996
- *
- * Changes:
- *
- * Chris Beauregard July 28th, 1996
- * - Fixed up integrated SCSI detection
- *
- * Chris Beauregard August 3rd, 1996
- * - Made mca_info local
- * - Made integrated registers accessible through standard function calls
- * - Added name field
- * - More sanity checking
- *
- * Chris Beauregard August 9th, 1996
- * - Rewrote /proc/mca
- *
- * Chris Beauregard January 7th, 1997
- * - Added basic NMI-processing
- * - Added more information to mca_info structure
- *
- * David Weinehall October 12th, 1998
- * - Made a lot of cleaning up in the source
- * - Added use of save_flags / restore_flags
- * - Added the 'driver_loaded' flag in MCA_adapter
- * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter
- *
- * David Weinehall March 24th, 1999
- * - Fixed the output of 'Driver Installed' in /proc/mca/pos
- * - Made the Integrated Video & SCSI show up even if they have id 0000
- *
- * Alexander Viro November 9th, 1999
- * - Switched to regular procfs methods
- *
- * Alfred Arnold & David Weinehall August 23rd, 2000
- * - Added support for Planar POS-registers
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/mca.h>
-#include <linux/kprobes.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/proc_fs.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-
-static unsigned char which_scsi;
-
-int MCA_bus;
-EXPORT_SYMBOL(MCA_bus);
-
-/*
- * Motherboard register spinlock. Untested on SMP at the moment, but
- * are there any MCA SMP boxes?
- *
- * Yes - Alan
- */
-static DEFINE_SPINLOCK(mca_lock);
-
-/* Build the status info for the adapter */
-
-static void mca_configure_adapter_status(struct mca_device *mca_dev)
-{
- mca_dev->status = MCA_ADAPTER_NONE;
-
- mca_dev->pos_id = mca_dev->pos[0]
- + (mca_dev->pos[1] << 8);
-
- if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
-
- /*
- * id = 0x0000 usually indicates hardware failure,
- * however, ZP Gu (zpg@castle.net> reports that his 9556
- * has 0x0000 as id and everything still works. There
- * also seem to be an adapter with id = 0x0000; the
- * NCR Parallel Bus Memory Card. Until this is confirmed,
- * however, this code will stay.
- */
-
- mca_dev->status = MCA_ADAPTER_ERROR;
-
- return;
- } else if (mca_dev->pos_id != 0xffff) {
-
- /*
- * 0xffff usually indicates that there's no adapter,
- * however, some integrated adapters may have 0xffff as
- * their id and still be valid. Examples are on-board
- * VGA of the 55sx, the integrated SCSI of the 56 & 57,
- * and possibly also the 95 ULTIMEDIA.
- */
-
- mca_dev->status = MCA_ADAPTER_NORMAL;
- }
-
- if ((mca_dev->pos_id == 0xffff ||
- mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
- int j;
-
- for (j = 2; j < 8; j++) {
- if (mca_dev->pos[j] != 0xff) {
- mca_dev->status = MCA_ADAPTER_NORMAL;
- break;
- }
- }
- }
-
- if (!(mca_dev->pos[2] & MCA_ENABLED)) {
-
- /* enabled bit is in POS 2 */
-
- mca_dev->status = MCA_ADAPTER_DISABLED;
- }
-} /* mca_configure_adapter_status */
-
-/*--------------------------------------------------------------------*/
-
-static struct resource mca_standard_resources[] = {
- { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" },
- { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" },
- { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" },
- { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" },
- { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" },
- { .start = 0x96, .end = 0x97, .name = "POS (MCA)" },
- { .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
-};
-
-#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources)
-
-/*
- * mca_read_and_store_pos - read the POS registers into a memory buffer
- * @pos: a char pointer to 8 bytes, contains the POS register value on
- * successful return
- *
- * Returns 1 if a card actually exists (i.e. the pos isn't
- * all 0xff) or 0 otherwise
- */
-static int mca_read_and_store_pos(unsigned char *pos)
-{
- int j;
- int found = 0;
-
- for (j = 0; j < 8; j++) {
- pos[j] = inb_p(MCA_POS_REG(j));
- if (pos[j] != 0xff) {
- /* 0xff all across means no device. 0x00 means
- * something's broken, but a device is
- * probably there. However, if you get 0x00
- * from a motherboard register it won't matter
- * what we find. For the record, on the
- * 57SLC, the integrated SCSI adapter has
- * 0xffff for the adapter ID, but nonzero for
- * other registers. */
-
- found = 1;
- }
- }
- return found;
-}
-
-static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
-{
- unsigned char byte;
- unsigned long flags;
-
- if (reg < 0 || reg >= 8)
- return 0;
-
- spin_lock_irqsave(&mca_lock, flags);
- if (mca_dev->pos_register) {
- /* Disable adapter setup, enable motherboard setup */
-
- outb_p(0, MCA_ADAPTER_SETUP_REG);
- outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-
- byte = inb_p(MCA_POS_REG(reg));
- outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
- } else {
-
- /* Make sure motherboard setup is off */
-
- outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
- /* Read the appropriate register */
-
- outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
- byte = inb_p(MCA_POS_REG(reg));
- outb_p(0, MCA_ADAPTER_SETUP_REG);
- }
- spin_unlock_irqrestore(&mca_lock, flags);
-
- mca_dev->pos[reg] = byte;
-
- return byte;
-}
-
-static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
- unsigned char byte)
-{
- unsigned long flags;
-
- if (reg < 0 || reg >= 8)
- return;
-
- spin_lock_irqsave(&mca_lock, flags);
-
- /* Make sure motherboard setup is off */
-
- outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
- /* Read in the appropriate register */
-
- outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
- outb_p(byte, MCA_POS_REG(reg));
- outb_p(0, MCA_ADAPTER_SETUP_REG);
-
- spin_unlock_irqrestore(&mca_lock, flags);
-
- /* Update the global register list, while we have the byte */
-
- mca_dev->pos[reg] = byte;
-
-}
-
-/* for the primary MCA bus, we have identity transforms */
-static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq)
-{
- return irq;
-}
-
-static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port)
-{
- return port;
-}
-
-static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem)
-{
- return mem;
-}
-
-
-static int __init mca_init(void)
-{
- unsigned int i, j;
- struct mca_device *mca_dev;
- unsigned char pos[8];
- short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
- struct mca_bus *bus;
-
- /*
- * WARNING: Be careful when making changes here. Putting an adapter
- * and the motherboard simultaneously into setup mode may result in
- * damage to chips (according to The Indispensable PC Hardware Book
- * by Hans-Peter Messmer). Also, we disable system interrupts (so
- * that we are not disturbed in the middle of this).
- */
-
- /* Make sure the MCA bus is present */
-
- if (mca_system_init()) {
- printk(KERN_ERR "MCA bus system initialisation failed\n");
- return -ENODEV;
- }
-
- if (!MCA_bus)
- return -ENODEV;
-
- printk(KERN_INFO "Micro Channel bus detected.\n");
-
- /* All MCA systems have at least a primary bus */
- bus = mca_attach_bus(MCA_PRIMARY_BUS);
- if (!bus)
- goto out_nomem;
- bus->default_dma_mask = 0xffffffffLL;
- bus->f.mca_write_pos = mca_pc_write_pos;
- bus->f.mca_read_pos = mca_pc_read_pos;
- bus->f.mca_transform_irq = mca_dummy_transform_irq;
- bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
- bus->f.mca_transform_memory = mca_dummy_transform_memory;
-
- /* get the motherboard device */
- mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
- if (unlikely(!mca_dev))
- goto out_nomem;
-
- /*
- * We do not expect many MCA interrupts during initialization,
- * but let us be safe:
- */
- spin_lock_irq(&mca_lock);
-
- /* Make sure adapter setup is off */
-
- outb_p(0, MCA_ADAPTER_SETUP_REG);
-
- /* Read motherboard POS registers */
-
- mca_dev->pos_register = 0x7f;
- outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
- mca_dev->name[0] = 0;
- mca_read_and_store_pos(mca_dev->pos);
- mca_configure_adapter_status(mca_dev);
- /* fake POS and slot for a motherboard */
- mca_dev->pos_id = MCA_MOTHERBOARD_POS;
- mca_dev->slot = MCA_MOTHERBOARD;
- mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-
- mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if (unlikely(!mca_dev))
- goto out_unlock_nomem;
-
- /* Put motherboard into video setup mode, read integrated video
- * POS registers, and turn motherboard setup off.
- */
-
- mca_dev->pos_register = 0xdf;
- outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
- mca_dev->name[0] = 0;
- mca_read_and_store_pos(mca_dev->pos);
- mca_configure_adapter_status(mca_dev);
- /* fake POS and slot for the integrated video */
- mca_dev->pos_id = MCA_INTEGVIDEO_POS;
- mca_dev->slot = MCA_INTEGVIDEO;
- mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-
- /*
- * Put motherboard into scsi setup mode, read integrated scsi
- * POS registers, and turn motherboard setup off.
- *
- * It seems there are two possible SCSI registers. Martin says that
- * for the 56,57, 0xf7 is the one, but fails on the 76.
- * Alfredo (apena@vnet.ibm.com) says
- * 0xfd works on his machine. We'll try both of them. I figure it's
- * a good bet that only one could be valid at a time. This could
- * screw up though if one is used for something else on the other
- * machine.
- */
-
- for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
- outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
- if (mca_read_and_store_pos(pos))
- break;
- }
- if (which_scsi) {
- /* found a scsi card */
- mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if (unlikely(!mca_dev))
- goto out_unlock_nomem;
-
- for (j = 0; j < 8; j++)
- mca_dev->pos[j] = pos[j];
-
- mca_configure_adapter_status(mca_dev);
- /* fake POS and slot for integrated SCSI controller */
- mca_dev->pos_id = MCA_INTEGSCSI_POS;
- mca_dev->slot = MCA_INTEGSCSI;
- mca_dev->pos_register = which_scsi;
- mca_register_device(MCA_PRIMARY_BUS, mca_dev);
- }
-
- /* Turn off motherboard setup */
-
- outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
- /*
- * Now loop over MCA slots: put each adapter into setup mode, and
- * read its POS registers. Then put adapter setup off.
- */
-
- for (i = 0; i < MCA_MAX_SLOT_NR; i++) {
- outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
- if (!mca_read_and_store_pos(pos))
- continue;
-
- mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if (unlikely(!mca_dev))
- goto out_unlock_nomem;
-
- for (j = 0; j < 8; j++)
- mca_dev->pos[j] = pos[j];
-
- mca_dev->driver_loaded = 0;
- mca_dev->slot = i;
- mca_dev->pos_register = 0;
- mca_configure_adapter_status(mca_dev);
- mca_register_device(MCA_PRIMARY_BUS, mca_dev);
- }
- outb_p(0, MCA_ADAPTER_SETUP_REG);
-
- /* Enable interrupts and return memory start */
- spin_unlock_irq(&mca_lock);
-
- for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
- request_resource(&ioport_resource, mca_standard_resources + i);
-
- mca_do_proc_init();
-
- return 0;
-
- out_unlock_nomem:
- spin_unlock_irq(&mca_lock);
- out_nomem:
- printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
- return -ENOMEM;
-}
-
-subsys_initcall(mca_init);
-
-/*--------------------------------------------------------------------*/
-
-static __kprobes void
-mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
-{
- int slot = mca_dev->slot;
-
- if (slot == MCA_INTEGSCSI) {
- printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
- mca_dev->name);
- } else if (slot == MCA_INTEGVIDEO) {
- printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
- mca_dev->name);
- } else if (slot == MCA_MOTHERBOARD) {
- printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
- mca_dev->name);
- }
-
- /* More info available in POS 6 and 7? */
-
- if (check_flag) {
- unsigned char pos6, pos7;
-
- pos6 = mca_device_read_pos(mca_dev, 6);
- pos7 = mca_device_read_pos(mca_dev, 7);
-
- printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7);
- }
-
-} /* mca_handle_nmi_slot */
-
-/*--------------------------------------------------------------------*/
-
-static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
-{
- struct mca_device *mca_dev = to_mca_device(dev);
- unsigned char pos5;
-
- pos5 = mca_device_read_pos(mca_dev, 5);
-
- if (!(pos5 & 0x80)) {
- /*
- * Bit 7 of POS 5 is reset when this adapter has a hardware
- * error. Bit 7 it reset if there's error information
- * available in POS 6 and 7.
- */
- mca_handle_nmi_device(mca_dev, !(pos5 & 0x40));
- return 1;
- }
- return 0;
-}
-
-void __kprobes mca_handle_nmi(void)
-{
- /*
- * First try - scan the various adapters and see if a specific
- * adapter was responsible for the error.
- */
- bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
-}
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index ca470e4c92d..b02d4dd6b8a 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -97,7 +97,7 @@ static void __init MP_bus_info(struct mpc_bus *m)
set_bit(m->busid, mp_bus_not_pci);
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
#endif
} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
@@ -105,12 +105,10 @@ static void __init MP_bus_info(struct mpc_bus *m)
x86_init.mpparse.mpc_oem_pci_bus(m);
clear_bit(m->busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
- } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
- mp_bus_id_to_type[m->busid] = MP_BUS_MCA;
#endif
} else
printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
@@ -368,9 +366,6 @@ static void __init construct_ioapic_table(int mpc_default_type)
case 3:
memcpy(bus.bustype, "EISA ", 6);
break;
- case 4:
- case 7:
- memcpy(bus.bustype, "MCA ", 6);
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
@@ -623,7 +618,7 @@ void __init default_find_smp_config(void)
return;
/*
* If it is an SMP machine we should know now, unless the
- * configuration is in an EISA/MCA bus machine with an
+ * configuration is in an EISA bus machine with an
* extended bios data area.
*
* there is a real-mode segmented pointer pointing to the
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 47acaf31916..7b3fdfdabf9 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -19,8 +19,6 @@
#include <linux/slab.h>
#include <linux/export.h>
-#include <linux/mca.h>
-
#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#endif
@@ -282,16 +280,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
__this_cpu_add(nmi_stats.unknown, 1);
-#ifdef CONFIG_MCA
- /*
- * Might actually be able to figure out what the guilty party
- * is:
- */
- if (MCA_bus) {
- mca_handle_nmi();
- return;
- }
-#endif
pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
reason, smp_processor_id());
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 1a290156205..879166402bf 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -34,7 +34,6 @@
#include <linux/memblock.h>
#include <linux/seq_file.h>
#include <linux/console.h>
-#include <linux/mca.h>
#include <linux/root_dev.h>
#include <linux/highmem.h>
#include <linux/module.h>
@@ -179,12 +178,6 @@ struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
/* common cpu data for all cpus */
struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
EXPORT_SYMBOL(boot_cpu_data);
-static void set_mca_bus(int x)
-{
-#ifdef CONFIG_MCA
- MCA_bus = x;
-#endif
-}
unsigned int def_to_bigsmp;
@@ -717,7 +710,6 @@ void __init setup_arch(char **cmdline_p)
apm_info.bios = boot_params.apm_bios_info;
ist_info = boot_params.ist_info;
if (boot_params.sys_desc_table.length != 0) {
- set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
machine_id = boot_params.sys_desc_table.table[0];
machine_submodel_id = boot_params.sys_desc_table.table[1];
BIOS_revision = boot_params.sys_desc_table.table[2];
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index c6eba2b4267..24d3c91e981 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -14,7 +14,6 @@
#include <linux/i8253.h>
#include <linux/time.h>
#include <linux/export.h>
-#include <linux/mca.h>
#include <asm/vsyscall.h>
#include <asm/x86_init.h>
@@ -58,11 +57,6 @@ EXPORT_SYMBOL(profile_pc);
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
global_clock_event->event_handler(global_clock_event);
-
- /* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
- if (MCA_bus)
- outb_p(inb_p(0x61)| 0x80, 0x61);
-
return IRQ_HANDLED;
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index ff9281f1602..4754f510b36 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -37,10 +37,6 @@
#include <linux/eisa.h>
#endif
-#ifdef CONFIG_MCA
-#include <linux/mca.h>
-#endif
-
#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#endif
diff --git a/drivers/Makefile b/drivers/Makefile
index 95952c82bf1..f9b82f2c7c4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -92,7 +92,6 @@ obj-$(CONFIG_BT) += bluetooth/
obj-$(CONFIG_ACCESSIBILITY) += accessibility/
obj-$(CONFIG_ISDN) += isdn/
obj-$(CONFIG_EDAC) += edac/
-obj-$(CONFIG_MCA) += mca/
obj-$(CONFIG_EISA) += eisa/
obj-y += lguest/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
diff --git a/drivers/mca/Kconfig b/drivers/mca/Kconfig
deleted file mode 100644
index a7a0220ab4b..00000000000
--- a/drivers/mca/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-config MCA_LEGACY
- bool "Legacy MCA API Support"
- depends on MCA
- help
- This compiles in support for the old slot based MCA API. If you
- have an unconverted MCA driver, you will need to say Y here. It
- is safe to say Y anyway.
-
-config MCA_PROC_FS
- bool "Support for the mca entry in /proc"
- depends on MCA_LEGACY && PROC_FS
- help
- If you want the old style /proc/mca directory in addition to the
- new style sysfs say Y here.
diff --git a/drivers/mca/Makefile b/drivers/mca/Makefile
deleted file mode 100644
index 0794b122520..00000000000
--- a/drivers/mca/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# Makefile for the Linux MCA bus support
-
-obj-y := mca-bus.o mca-device.o mca-driver.o
-
-obj-$(CONFIG_MCA_PROC_FS) += mca-proc.o
-obj-$(CONFIG_MCA_LEGACY) += mca-legacy.o
-
diff --git a/drivers/mca/mca-bus.c b/drivers/mca/mca-bus.c
deleted file mode 100644
index ada5ebbaa25..00000000000
--- a/drivers/mca/mca-bus.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/*
- * MCA bus support functions for sysfs.
- *
- * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
- *
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/mca.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-/* Very few machines have more than one MCA bus. However, there are
- * those that do (Voyager 35xx/5xxx), so we do it this way for future
- * expansion. None that I know have more than 2 */
-static struct mca_bus *mca_root_busses[MAX_MCA_BUSSES];
-
-#define MCA_DEVINFO(i,s) { .pos = i, .name = s }
-
-struct mca_device_info {
- short pos_id; /* the 2 byte pos id for this card */
- char name[50];
-};
-
-static int mca_bus_match (struct device *dev, struct device_driver *drv)
-{
- struct mca_device *mca_dev = to_mca_device (dev);
- struct mca_driver *mca_drv = to_mca_driver (drv);
- const unsigned short *mca_ids = mca_drv->id_table;
- int i = 0;
-
- if (mca_ids) {
- for(i = 0; mca_ids[i]; i++) {
- if (mca_ids[i] == mca_dev->pos_id) {
- mca_dev->index = i;
- return 1;
- }
- }
- }
- /* If the integrated id is present, treat it as though it were an
- * additional id in the id_table (it can't be because by definition,
- * integrated id's overflow a short */
- if (mca_drv->integrated_id && mca_dev->pos_id ==
- mca_drv->integrated_id) {
- mca_dev->index = i;
- return 1;
- }
- return 0;
-}
-
-struct bus_type mca_bus_type = {
- .name = "MCA",
- .match = mca_bus_match,
-};
-EXPORT_SYMBOL (mca_bus_type);
-
-static ssize_t mca_show_pos_id(struct device *dev, struct device_attribute *attr, char *buf)
-{
- /* four digits, \n and trailing \0 */
- struct mca_device *mca_dev = to_mca_device(dev);
- int len;
-
- if(mca_dev->pos_id < MCA_DUMMY_POS_START)
- len = sprintf(buf, "%04x\n", mca_dev->pos_id);
- else
- len = sprintf(buf, "none\n");
- return len;
-}
-static ssize_t mca_show_pos(struct device *dev, struct device_attribute *attr, char *buf)
-{
- /* enough for 8 two byte hex chars plus space and new line */
- int j, len=0;
- struct mca_device *mca_dev = to_mca_device(dev);
-
- for(j=0; j<8; j++)
- len += sprintf(buf+len, "%02x ", mca_dev->pos[j]);
- /* change last trailing space to new line */
- buf[len-1] = '\n';
- return len;
-}
-
-static DEVICE_ATTR(id, S_IRUGO, mca_show_pos_id, NULL);
-static DEVICE_ATTR(pos, S_IRUGO, mca_show_pos, NULL);
-
-int __init mca_register_device(int bus, struct mca_device *mca_dev)
-{
- struct mca_bus *mca_bus = mca_root_busses[bus];
- int rc;
-
- mca_dev->dev.parent = &mca_bus->dev;
- mca_dev->dev.bus = &mca_bus_type;
- dev_set_name(&mca_dev->dev, "%02d:%02X", bus, mca_dev->slot);
- mca_dev->dma_mask = mca_bus->default_dma_mask;
- mca_dev->dev.dma_mask = &mca_dev->dma_mask;
- mca_dev->dev.coherent_dma_mask = mca_dev->dma_mask;
-
- rc = device_register(&mca_dev->dev);
- if (rc)
- goto err_out;
-
- rc = device_create_file(&mca_dev->dev, &dev_attr_id);
- if (rc) goto err_out_devreg;
- rc = device_create_file(&mca_dev->dev, &dev_attr_pos);
- if (rc) goto err_out_id;
-
- return 1;
-
-err_out_id:
- device_remove_file(&mca_dev->dev, &dev_attr_id);
-err_out_devreg:
- device_unregister(&mca_dev->dev);
-err_out:
- return 0;
-}
-
-/* */
-struct mca_bus * __devinit mca_attach_bus(int bus)
-{
- struct mca_bus *mca_bus;
-
- if (unlikely(mca_root_busses[bus] != NULL)) {
- /* This should never happen, but just in case */
- printk(KERN_EMERG "MCA tried to add already existing bus %d\n",
- bus);
- dump_stack();
- return NULL;
- }
-
- mca_bus = kzalloc(sizeof(struct mca_bus), GFP_KERNEL);
- if (!mca_bus)
- return NULL;
-
- dev_set_name(&mca_bus->dev, "mca%d", bus);
- sprintf(mca_bus->name,"Host %s MCA Bridge", bus ? "Secondary" : "Primary");
- if (device_register(&mca_bus->dev)) {
- kfree(mca_bus);
- return NULL;
- }
-
- mca_root_busses[bus] = mca_bus;
-
- return mca_bus;
-}
-
-int __init mca_system_init (void)
-{
- return bus_register(&mca_bus_type);
-}
diff --git a/drivers/mca/mca-device.c b/drivers/mca/mca-device.c
deleted file mode 100644
index e7adf89fae4..00000000000
--- a/drivers/mca/mca-device.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/*
- * MCA device support functions
- *
- * These functions support the ongoing device access API.
- *
- * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
- *
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mca.h>
-#include <linux/string.h>
-
-/**
- * mca_device_read_stored_pos - read POS register from stored data
- * @mca_dev: device to read from
- * @reg: register to read from
- *
- * Fetch a POS value that was stored at boot time by the kernel
- * when it scanned the MCA space. The register value is returned.
- * Missing or invalid registers report 0.
- */
-unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev, int reg)
-{
- if(reg < 0 || reg >= 8)
- return 0;
-
- return mca_dev->pos[reg];
-}
-EXPORT_SYMBOL(mca_device_read_stored_pos);
-
-/**
- * mca_device_read_pos - read POS register from card
- * @mca_dev: device to read from
- * @reg: register to read from
- *
- * Fetch a POS value directly from the hardware to obtain the
- * current value. This is much slower than
- * mca_device_read_stored_pos and may not be invoked from
- * interrupt context. It handles the deep magic required for
- * onboard devices transparently.
- */
-unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg)
-{
- struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
-
- return mca_bus->f.mca_read_pos(mca_dev, reg);
-
- return mca_dev->pos[reg];
-}
-EXPORT_SYMBOL(mca_device_read_pos);
-
-
-/**
- * mca_device_write_pos - read POS register from card
- * @mca_dev: device to write pos register to
- * @reg: register to write to
- * @byte: byte to write to the POS registers
- *
- * Store a POS value directly to the hardware. You should not
- * normally need to use this function and should have a very good
- * knowledge of MCA bus before you do so. Doing this wrongly can
- * damage the hardware.
- *
- * This function may not be used from interrupt context.
- *
- */
-void mca_device_write_pos(struct mca_device *mca_dev, int reg,
- unsigned char byte)
-{
- struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
-
- mca_bus->f.mca_write_pos(mca_dev, reg, byte);
-}
-EXPORT_SYMBOL(mca_device_write_pos);
-
-/**
- * mca_device_transform_irq - transform the ADF obtained IRQ
- * @mca_device: device whose irq needs transforming
- * @irq: input irq from ADF
- *
- * MCA Adapter Definition Files (ADF) contain irq, ioport, memory
- * etc. definitions. In systems with more than one bus, these need
- * to be transformed through bus mapping functions to get the real
- * system global quantities.
- *
- * This function transforms the interrupt number and returns the
- * transformed system global interrupt
- */
-int mca_device_transform_irq(struct mca_device *mca_dev, int irq)
-{
- struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
-
- return mca_bus->f.mca_transform_irq(mca_dev, irq);
-}
-EXPORT_SYMBOL(mca_device_transform_irq);
-
-/**
- * mca_device_transform_ioport - transform the ADF obtained I/O port
- * @mca_device: device whose port needs transforming
- * @ioport: input I/O port from ADF
- *
- * MCA Adapter Definition Files (ADF) contain irq, ioport, memory
- * etc. definitions. In systems with more than one bus, these need
- * to be transformed through bus mapping functions to get the real
- * system global quantities.
- *
- * This function transforms the I/O port number and returns the
- * transformed system global port number.
- *
- * This transformation can be assumed to be linear for port ranges.
- */
-int mca_device_transform_ioport(struct mca_device *mca_dev, int port)
-{
- struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
-
- return mca_bus->f.mca_transform_ioport(mca_dev, port);
-}
-EXPORT_SYMBOL(mca_device_transform_ioport);
-
-/**
- * mca_device_transform_memory - transform the ADF obtained memory
- * @mca_device: device whose memory region needs transforming
- * @mem: memory region start from ADF
- *
- * MCA Adapter Definition Files (ADF) contain irq, ioport, memory
- * etc. definitions. In systems with more than one bus, these need
- * to be transformed through bus mapping functions to get the real
- * system global quantities.
- *
- * This function transforms the memory region start and returns the
- * transformed system global memory region (physical).
- *
- * This transformation can be assumed to be linear for region ranges.
- */
-void *mca_device_transform_memory(struct mca_device *mca_dev, void *mem)
-{
- struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
-
- return mca_bus->f.mca_transform_memory(mca_dev, mem);
-}
-EXPORT_SYMBOL(mca_device_transform_memory);
-
-
-/**
- * mca_device_claimed - check if claimed by driver
- * @mca_dev: device to check
- *
- * Returns 1 if the slot has been claimed by a driver
- */
-
-int mca_device_claimed(struct mca_device *mca_dev)
-{
- return mca_dev->driver_loaded;
-}
-EXPORT_SYMBOL(mca_device_claimed);
-
-/**
- * mca_device_set_claim - set the claim value of the driver
- * @mca_dev: device to set value for
- * @val: claim value to set (1 claimed, 0 unclaimed)
- */
-void mca_device_set_claim(struct mca_device *mca_dev, int val)
-{
- mca_dev->driver_loaded = val;
-}
-EXPORT_SYMBOL(mca_device_set_claim);
-
-/**
- * mca_device_status - get the status of the device
- * @mca_device: device to get
- *
- * returns an enumeration of the device status:
- *
- * MCA_ADAPTER_NORMAL adapter is OK.
- * MCA_ADAPTER_NONE no adapter at device (should never happen).
- * MCA_ADAPTER_DISABLED adapter is disabled.
- * MCA_ADAPTER_ERROR adapter cannot be initialised.
- */
-enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev)
-{
- return mca_dev->status;
-}
-EXPORT_SYMBOL(mca_device_status);
-
-/**
- * mca_device_set_name - set the name of the device
- * @mca_device: device to set the name of
- * @name: name to set
- */
-void mca_device_set_name(struct mca_device *mca_dev, const char *name)
-{
- if(!mca_dev)
- return;
-
- strlcpy(mca_dev->name, name, sizeof(mca_dev->name));
-}
-EXPORT_SYMBOL(mca_device_set_name);
diff --git a/drivers/mca/mca-driver.c b/drivers/mca/mca-driver.c
deleted file mode 100644
index 32cd39bcc71..00000000000
--- a/drivers/mca/mca-driver.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/*
- * MCA driver support functions for sysfs.
- *
- * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
- *
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
- */
-
-#include <linux/device.h>
-#include <linux/mca.h>
-#include <linux/module.h>
-
-int mca_register_driver(struct mca_driver *mca_drv)
-{
- int r;
-
- if (MCA_bus) {
- mca_drv->driver.bus = &mca_bus_type;
- if ((r = driver_register(&mca_drv->driver)) < 0)
- return r;
- mca_drv->integrated_id = 0;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(mca_register_driver);
-
-int mca_register_driver_integrated(struct mca_driver *mca_driver,
- int integrated_id)
-{
- int r = mca_register_driver(mca_driver);
-
- if (!r)
- mca_driver->integrated_id = integrated_id;
-
- return r;
-}
-EXPORT_SYMBOL(mca_register_driver_integrated);
-
-void mca_unregister_driver(struct mca_driver *mca_drv)
-{
- if (MCA_bus)
- driver_unregister(&mca_drv->driver);
-}
-EXPORT_SYMBOL(mca_unregister_driver);
diff --git a/drivers/mca/mca-legacy.c b/drivers/mca/mca-legacy.c
deleted file mode 100644
index 494f0c2001f..00000000000
--- a/drivers/mca/mca-legacy.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/*
- * MCA bus support functions for legacy (2.4) API.
- *
- * Legacy API means the API that operates in terms of MCA slot number
- *
- * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
- *
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mca-legacy.h>
-#include <asm/io.h>
-
-/* NOTE: This structure is stack allocated */
-struct mca_find_adapter_info {
- int id;
- int slot;
- struct mca_device *mca_dev;
-};
-
-/* The purpose of this iterator is to loop over all the devices and
- * find the one with the smallest slot number that's just greater than
- * or equal to the required slot with a matching id */
-static int mca_find_adapter_callback(struct device *dev, void *data)
-{
- struct mca_find_adapter_info *info = data;
- struct mca_device *mca_dev = to_mca_device(dev);
-
- if(mca_dev->pos_id != info->id)
- return 0;
-
- if(mca_dev->slot < info->slot)
- return 0;
-
- if(!info->mca_dev || info->mca_dev->slot >= mca_dev->slot)
- info->mca_dev = mca_dev;
-
- return 0;
-}
-
-/**
- * mca_find_adapter - scan for adapters
- * @id: MCA identification to search for
- * @start: starting slot
- *
- * Search the MCA configuration for adapters matching the 16bit
- * ID given. The first time it should be called with start as zero
- * and then further calls made passing the return value of the
- * previous call until %MCA_NOTFOUND is returned.
- *
- * Disabled adapters are not reported.
- */
-
-int mca_find_adapter(int id, int start)
-{
- struct mca_find_adapter_info info;
-
- if(id == 0xffff)
- return MCA_NOTFOUND;
-
- info.slot = start;
- info.id = id;
- info.mca_dev = NULL;
-
- for(;;) {
- bus_for_each_dev(&mca_bus_type, NULL, &info, mca_find_adapter_callback);
-
- if(info.mca_dev == NULL)
- return MCA_NOTFOUND;
-
- if(info.mca_dev->status != MCA_ADAPTER_DISABLED)
- break;
-
- /* OK, found adapter but it was disabled. Go around
- * again, excluding the slot we just found */
-
- info.slot = info.mca_dev->slot + 1;
- info.mca_dev = NULL;
- }
-
- return info.mca_dev->slot;
-}
-EXPORT_SYMBOL(mca_find_adapter);
-
-/*--------------------------------------------------------------------*/
-
-/**
- * mca_find_unused_adapter - scan for unused adapters
- * @id: MCA identification to search for
- * @start: starting slot
- *
- * Search the MCA configuration for adapters matching the 16bit
- * ID given. The first time it should be called with start as zero
- * and then further calls made passing the return value of the
- * previous call until %MCA_NOTFOUND is returned.
- *
- * Adapters that have been claimed by drivers and those that
- * are disabled are not reported. This function thus allows a driver
- * to scan for further cards when some may already be driven.
- */
-
-int mca_find_unused_adapter(int id, int start)
-{
- struct mca_find_adapter_info info = { 0 };
-
- if (!MCA_bus || id == 0xffff)
- return MCA_NOTFOUND;
-
- info.slot = start;
- info.id = id;
- info.mca_dev = NULL;
-
- for(;;) {
- bus_for_each_dev(&mca_bus_type, NULL, &info, mca_find_adapter_callback);
-
- if(info.mca_dev == NULL)
- return MCA_NOTFOUND;
-
- if(info.mca_dev->status != MCA_ADAPTER_DISABLED
- && !info.mca_dev->driver_loaded)
- break;
-
- /* OK, found adapter but it was disabled or already in
- * use. Go around again, excluding the slot we just
- * found */
-
- info.slot = info.mca_dev->slot + 1;
- info.mca_dev = NULL;
- }
-
- return info.mca_dev->slot;
-}
-EXPORT_SYMBOL(mca_find_unused_adapter);
-
-/* NOTE: stack allocated structure */
-struct mca_find_device_by_slot_info {
- int slot;
- struct mca_device *mca_dev;
-};
-
-static int mca_find_device_by_slot_callback(struct device *dev, void *data)
-{
- struct mca_find_device_by_slot_info *info = data;
- struct mca_device *mca_dev = to_mca_device(dev);
-
- if(mca_dev->slot == info->slot)
- info->mca_dev = mca_dev;
-
- return 0;
-}
-
-struct mca_device *mca_find_device_by_slot(int slot)
-{
- struct mca_find_device_by_slot_info info;
-
- info.slot = slot;
- info.mca_dev = NULL;
-
- bus_for_each_dev(&mca_bus_type, NULL, &info, mca_find_device_by_slot_callback);
-
- return info.mca_dev;
-}
-
-/**
- * mca_read_stored_pos - read POS register from boot data
- * @slot: slot number to read from
- * @reg: register to read from
- *
- * Fetch a POS value that was stored at boot time by the kernel
- * when it scanned the MCA space. The register value is returned.
- * Missing or invalid registers report 0.
- */
-unsigned char mca_read_stored_pos(int slot, int reg)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- return 0;
-
- return mca_device_read_stored_pos(mca_dev, reg);
-}
-EXPORT_SYMBOL(mca_read_stored_pos);
-
-
-/**
- * mca_read_pos - read POS register from card
- * @slot: slot number to read from
- * @reg: register to read from
- *
- * Fetch a POS value directly from the hardware to obtain the
- * current value. This is much slower than mca_read_stored_pos and
- * may not be invoked from interrupt context. It handles the
- * deep magic required for onboard devices transparently.
- */
-
-unsigned char mca_read_pos(int slot, int reg)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- return 0;
-
- return mca_device_read_pos(mca_dev, reg);
-}
-EXPORT_SYMBOL(mca_read_pos);
-
-
-/**
- * mca_write_pos - read POS register from card
- * @slot: slot number to read from
- * @reg: register to read from
- * @byte: byte to write to the POS registers
- *
- * Store a POS value directly from the hardware. You should not
- * normally need to use this function and should have a very good
- * knowledge of MCA bus before you do so. Doing this wrongly can
- * damage the hardware.
- *
- * This function may not be used from interrupt context.
- *
- * Note that this a technically a Bad Thing, as IBM tech stuff says
- * you should only set POS values through their utilities.
- * However, some devices such as the 3c523 recommend that you write
- * back some data to make sure the configuration is consistent.
- * I'd say that IBM is right, but I like my drivers to work.
- *
- * This function can't do checks to see if multiple devices end up
- * with the same resources, so you might see magic smoke if someone
- * screws up.
- */
-
-void mca_write_pos(int slot, int reg, unsigned char byte)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- return;
-
- mca_device_write_pos(mca_dev, reg, byte);
-}
-EXPORT_SYMBOL(mca_write_pos);
-
-/**
- * mca_set_adapter_name - Set the description of the card
- * @slot: slot to name
- * @name: text string for the namen
- *
- * This function sets the name reported via /proc for this
- * adapter slot. This is for user information only. Setting a
- * name deletes any previous name.
- */
-
-void mca_set_adapter_name(int slot, char* name)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- return;
-
- mca_device_set_name(mca_dev, name);
-}
-EXPORT_SYMBOL(mca_set_adapter_name);
-
-/**
- * mca_mark_as_used - claim an MCA device
- * @slot: slot to claim
- * FIXME: should we make this threadsafe
- *
- * Claim an MCA slot for a device driver. If the
- * slot is already taken the function returns 1,
- * if it is not taken it is claimed and 0 is
- * returned.
- */
-
-int mca_mark_as_used(int slot)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- /* FIXME: this is actually a severe error */
- return 1;
-
- if(mca_device_claimed(mca_dev))
- return 1;
-
- mca_device_set_claim(mca_dev, 1);
-
- return 0;
-}
-EXPORT_SYMBOL(mca_mark_as_used);
-
-/**
- * mca_mark_as_unused - release an MCA device
- * @slot: slot to claim
- *
- * Release the slot for other drives to use.
- */
-
-void mca_mark_as_unused(int slot)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- return;
-
- mca_device_set_claim(mca_dev, 0);
-}
-EXPORT_SYMBOL(mca_mark_as_unused);
-
diff --git a/drivers/mca/mca-proc.c b/drivers/mca/mca-proc.c
deleted file mode 100644
index 81ea0d377bf..00000000000
--- a/drivers/mca/mca-proc.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/*
- * MCA bus support functions for the proc fs.
- *
- * NOTE: this code *requires* the legacy MCA api.
- *
- * Legacy API means the API that operates in terms of MCA slot number
- *
- * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
- *
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/mca.h>
-
-static int get_mca_info_helper(struct mca_device *mca_dev, char *page, int len)
-{
- int j;
-
- for(j=0; j<8; j++)
- len += sprintf(page+len, "%02x ",
- mca_dev ? mca_dev->pos[j] : 0xff);
- len += sprintf(page+len, " %s\n", mca_dev ? mca_dev->name : "");
- return len;
-}
-
-static int get_mca_info(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int i, len = 0;
-
- if(MCA_bus) {
- struct mca_device *mca_dev;
- /* Format POS registers of eight MCA slots */
-
- for(i=0; i<MCA_MAX_SLOT_NR; i++) {
- mca_dev = mca_find_device_by_slot(i);
-
- len += sprintf(page+len, "Slot %d: ", i+1);
- len = get_mca_info_helper(mca_dev, page, len);
- }
-
- /* Format POS registers of integrated video subsystem */
-
- mca_dev = mca_find_device_by_slot(MCA_INTEGVIDEO);
- len += sprintf(page+len, "Video : ");
- len = get_mca_info_helper(mca_dev, page, len);
-
- /* Format POS registers of integrated SCSI subsystem */
-
- mca_dev = mca_find_device_by_slot(MCA_INTEGSCSI);
- len += sprintf(page+len, "SCSI : ");
- len = get_mca_info_helper(mca_dev, page, len);
-
- /* Format POS registers of motherboard */
-
- mca_dev = mca_find_device_by_slot(MCA_MOTHERBOARD);
- len += sprintf(page+len, "Planar: ");
- len = get_mca_info_helper(mca_dev, page, len);
- } else {
- /* Leave it empty if MCA not detected - this should *never*
- * happen!
- */
- }
-
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-}
-
-/*--------------------------------------------------------------------*/
-
-static int mca_default_procfn(char* buf, struct mca_device *mca_dev)
-{
- int len = 0, i;
- int slot = mca_dev->slot;
-
- /* Print out the basic information */
-
- if(slot < MCA_MAX_SLOT_NR) {
- len += sprintf(buf+len, "Slot: %d\n", slot+1);
- } else if(slot == MCA_INTEGSCSI) {
- len += sprintf(buf+len, "Integrated SCSI Adapter\n");
- } else if(slot == MCA_INTEGVIDEO) {
- len += sprintf(buf+len, "Integrated Video Adapter\n");
- } else if(slot == MCA_MOTHERBOARD) {
- len += sprintf(buf+len, "Motherboard\n");
- }
- if (mca_dev->name[0]) {
-
- /* Drivers might register a name without /proc handler... */
-
- len += sprintf(buf+len, "Adapter Name: %s\n",
- mca_dev->name);
- } else {
- len += sprintf(buf+len, "Adapter Name: Unknown\n");
- }
- len += sprintf(buf+len, "Id: %02x%02x\n",
- mca_dev->pos[1], mca_dev->pos[0]);
- len += sprintf(buf+len, "Enabled: %s\nPOS: ",
- mca_device_status(mca_dev) == MCA_ADAPTER_NORMAL ?
- "Yes" : "No");
- for(i=0; i<8; i++) {
- len += sprintf(buf+len, "%02x ", mca_dev->pos[i]);
- }
- len += sprintf(buf+len, "\nDriver Installed: %s",
- mca_device_claimed(mca_dev) ? "Yes" : "No");
- buf[len++] = '\n';
- buf[len] = 0;
-
- return len;
-} /* mca_default_procfn() */
-
-static int get_mca_machine_info(char* page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(page+len, "Model Id: 0x%x\n", machine_id);
- len += sprintf(page+len, "Submodel Id: 0x%x\n", machine_submodel_id);
- len += sprintf(page+len, "BIOS Revision: 0x%x\n", BIOS_revision);
-
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-}
-
-static int mca_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- struct mca_device *mca_dev = (struct mca_device *)data;
- int len = 0;
-
- /* Get the standard info */
-
- len = mca_default_procfn(page, mca_dev);
-
- /* Do any device-specific processing, if there is any */
-
- if(mca_dev->procfn) {
- len += mca_dev->procfn(page+len, mca_dev->slot,
- mca_dev->proc_dev);
- }
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-} /* mca_read_proc() */
-
-/*--------------------------------------------------------------------*/
-
-void __init mca_do_proc_init(void)
-{
- int i;
- struct proc_dir_entry *proc_mca;
- struct proc_dir_entry* node = NULL;
- struct mca_device *mca_dev;
-
- proc_mca = proc_mkdir("mca", NULL);
- create_proc_read_entry("pos",0,proc_mca,get_mca_info,NULL);
- create_proc_read_entry("machine",0,proc_mca,get_mca_machine_info,NULL);
-
- /* Initialize /proc/mca entries for existing adapters */
-
- for(i = 0; i < MCA_NUMADAPTERS; i++) {
- enum MCA_AdapterStatus status;
- mca_dev = mca_find_device_by_slot(i);
- if(!mca_dev)
- continue;
-
- mca_dev->procfn = NULL;
-
- if(i < MCA_MAX_SLOT_NR) sprintf(mca_dev->procname,"slot%d", i+1);
- else if(i == MCA_INTEGVIDEO) sprintf(mca_dev->procname,"video");
- else if(i == MCA_INTEGSCSI) sprintf(mca_dev->procname,"scsi");
- else if(i == MCA_MOTHERBOARD) sprintf(mca_dev->procname,"planar");
-
- status = mca_device_status(mca_dev);
- if (status != MCA_ADAPTER_NORMAL &&
- status != MCA_ADAPTER_DISABLED)
- continue;
-
- node = create_proc_read_entry(mca_dev->procname, 0, proc_mca,
- mca_read_proc, (void *)mca_dev);
-
- if(node == NULL) {
- printk("Failed to allocate memory for MCA proc-entries!");
- return;
- }
- }
-
-} /* mca_do_proc_init() */
-
-/**
- * mca_set_adapter_procfn - Set the /proc callback
- * @slot: slot to configure
- * @procfn: callback function to call for /proc
- * @dev: device information passed to the callback
- *
- * This sets up an information callback for /proc/mca/slot?. The
- * function is called with the buffer, slot, and device pointer (or
- * some equally informative context information, or nothing, if you
- * prefer), and is expected to put useful information into the
- * buffer. The adapter name, ID, and POS registers get printed
- * before this is called though, so don't do it again.
- *
- * This should be called with a %NULL @procfn when a module
- * unregisters, thus preventing kernel crashes and other such
- * nastiness.
- */
-
-void mca_set_adapter_procfn(int slot, MCA_ProcFn procfn, void* proc_dev)
-{
- struct mca_device *mca_dev = mca_find_device_by_slot(slot);
-
- if(!mca_dev)
- return;
-
- mca_dev->procfn = procfn;
- mca_dev->proc_dev = proc_dev;
-}
-EXPORT_SYMBOL(mca_set_adapter_procfn);
diff --git a/drivers/message/i2o/i2o_proc.c b/drivers/message/i2o/i2o_proc.c
index 6d115c7208a..506c36f6e1d 100644
--- a/drivers/message/i2o/i2o_proc.c
+++ b/drivers/message/i2o/i2o_proc.c
@@ -283,7 +283,6 @@ static char *bus_strings[] = {
"Local Bus",
"ISA",
"EISA",
- "MCA",
"PCI",
"PCMCIA",
"NUBUS",
@@ -351,18 +350,6 @@ static int i2o_seq_show_hrt(struct seq_file *seq, void *v)
EisaSlotNumber);
break;
- case I2O_BUS_MCA:
- seq_printf(seq, " IOBase: %0#6x,",
- hrt->hrt_entry[i].bus.mca_bus.
- McaBaseIOPort);
- seq_printf(seq, " MemoryBase: %0#10x,",
- hrt->hrt_entry[i].bus.mca_bus.
- McaBaseMemoryAddress);
- seq_printf(seq, " Slot: %0#4x,",
- hrt->hrt_entry[i].bus.mca_bus.
- McaSlotNumber);
- break;
-
case I2O_BUS_PCI:
seq_printf(seq, " Bus: %0#4x",
hrt->hrt_entry[i].bus.pci_bus.
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
index a0b23dd4523..a8093bfec3a 100644
--- a/include/linux/i2o-dev.h
+++ b/include/linux/i2o-dev.h
@@ -124,7 +124,7 @@ typedef struct i2o_sg_io_hdr {
#define I2O_BUS_LOCAL 0
#define I2O_BUS_ISA 1
#define I2O_BUS_EISA 2
-#define I2O_BUS_MCA 3
+/* was I2O_BUS_MCA 3 */
#define I2O_BUS_PCI 4
#define I2O_BUS_PCMCIA 5
#define I2O_BUS_NUBUS 6
diff --git a/include/linux/mca-legacy.h b/include/linux/mca-legacy.h
deleted file mode 100644
index 7a3aea84590..00000000000
--- a/include/linux/mca-legacy.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* This is the function prototypes for the old legacy MCA interface
- *
- * Please move your driver to the new sysfs based one instead */
-
-#ifndef _LINUX_MCA_LEGACY_H
-#define _LINUX_MCA_LEGACY_H
-
-#include <linux/mca.h>
-
-#warning "MCA legacy - please move your driver to the new sysfs api"
-
-/* MCA_NOTFOUND is an error condition. The other two indicate
- * motherboard POS registers contain the adapter. They might be
- * returned by the mca_find_adapter() function, and can be used as
- * arguments to mca_read_stored_pos(). I'm not going to allow direct
- * access to the motherboard registers until we run across an adapter
- * that requires it. We don't know enough about them to know if it's
- * safe.
- *
- * See Documentation/mca.txt or one of the existing drivers for
- * more information.
- */
-#define MCA_NOTFOUND (-1)
-
-
-
-/* Returns the slot of the first enabled adapter matching id. User can
- * specify a starting slot beyond zero, to deal with detecting multiple
- * devices. Returns MCA_NOTFOUND if id not found. Also checks the
- * integrated adapters.
- */
-extern int mca_find_adapter(int id, int start);
-extern int mca_find_unused_adapter(int id, int start);
-
-extern int mca_mark_as_used(int slot);
-extern void mca_mark_as_unused(int slot);
-
-/* gets a byte out of POS register (stored in memory) */
-extern unsigned char mca_read_stored_pos(int slot, int reg);
-
-/* This can be expanded later. Right now, it gives us a way of
- * getting meaningful information into the MCA_info structure,
- * so we can have a more interesting /proc/mca.
- */
-extern void mca_set_adapter_name(int slot, char* name);
-
-/* These routines actually mess with the hardware POS registers. They
- * temporarily disable the device (and interrupts), so make sure you know
- * what you're doing if you use them. Furthermore, writing to a POS may
- * result in two devices trying to share a resource, which in turn can
- * result in multiple devices sharing memory spaces, IRQs, or even trashing
- * hardware. YOU HAVE BEEN WARNED.
- *
- * You can only access slots with this. Motherboard registers are off
- * limits.
- */
-
-/* read a byte from the specified POS register. */
-extern unsigned char mca_read_pos(int slot, int reg);
-
-/* write a byte to the specified POS register. */
-extern void mca_write_pos(int slot, int reg, unsigned char byte);
-
-#endif
diff --git a/include/linux/mca.h b/include/linux/mca.h
deleted file mode 100644
index 37972704617..00000000000
--- a/include/linux/mca.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Header for Microchannel Architecture Bus
- * Written by Martin Kolinek, February 1996
- */
-
-#ifndef _LINUX_MCA_H
-#define _LINUX_MCA_H
-
-#include <linux/device.h>
-
-#ifdef CONFIG_MCA
-#include <asm/mca.h>
-
-extern int MCA_bus;
-#else
-#define MCA_bus 0
-#endif
-
-/* This sets up an information callback for /proc/mca/slot?. The
- * function is called with the buffer, slot, and device pointer (or
- * some equally informative context information, or nothing, if you
- * prefer), and is expected to put useful information into the
- * buffer. The adapter name, id, and POS registers get printed
- * before this is called though, so don't do it again.
- *
- * This should be called with a NULL procfn when a module
- * unregisters, thus preventing kernel crashes and other such
- * nastiness.
- */
-typedef int (*MCA_ProcFn)(char* buf, int slot, void* dev);
-
-/* Should only be called by the NMI interrupt handler, this will do some
- * fancy stuff to figure out what might have generated a NMI.
- */
-extern void mca_handle_nmi(void);
-
-enum MCA_AdapterStatus {
- MCA_ADAPTER_NORMAL = 0,
- MCA_ADAPTER_NONE = 1,
- MCA_ADAPTER_DISABLED = 2,
- MCA_ADAPTER_ERROR = 3
-};
-
-struct mca_device {
- u64 dma_mask;
- int pos_id;
- int slot;
-
- /* index into id_table, set by the bus match routine */
- int index;
-
- /* is there a driver installed? 0 - No, 1 - Yes */
- int driver_loaded;
- /* POS registers */
- unsigned char pos[8];
- /* if a pseudo adapter of the motherboard, this is the motherboard
- * register value to use for setup cycles */
- short pos_register;
-
- enum MCA_AdapterStatus status;
-#ifdef CONFIG_MCA_PROC_FS
- /* name of the proc/mca file */
- char procname[8];
- /* /proc info callback */
- MCA_ProcFn procfn;
- /* device/context info for proc callback */
- void *proc_dev;
-#endif
- struct device dev;
- char name[32];
-};
-#define to_mca_device(mdev) container_of(mdev, struct mca_device, dev)
-
-struct mca_bus_accessor_functions {
- unsigned char (*mca_read_pos)(struct mca_device *, int reg);
- void (*mca_write_pos)(struct mca_device *, int reg,
- unsigned char byte);
- int (*mca_transform_irq)(struct mca_device *, int irq);
- int (*mca_transform_ioport)(struct mca_device *,
- int region);
- void * (*mca_transform_memory)(struct mca_device *,
- void *memory);
-};
-
-struct mca_bus {
- u64 default_dma_mask;
- int number;
- struct mca_bus_accessor_functions f;
- struct device dev;
- char name[32];
-};
-#define to_mca_bus(mdev) container_of(mdev, struct mca_bus, dev)
-
-struct mca_driver {
- const short *id_table;
- void *driver_data;
- int integrated_id;
- struct device_driver driver;
-};
-#define to_mca_driver(mdriver) container_of(mdriver, struct mca_driver, driver)
-
-/* Ongoing supported API functions */
-extern struct mca_device *mca_find_device_by_slot(int slot);
-extern int mca_system_init(void);
-extern struct mca_bus *mca_attach_bus(int);
-
-extern unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev,
- int reg);
-extern unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg);
-extern void mca_device_write_pos(struct mca_device *mca_dev, int reg,
- unsigned char byte);
-extern int mca_device_transform_irq(struct mca_device *mca_dev, int irq);
-extern int mca_device_transform_ioport(struct mca_device *mca_dev, int port);
-extern void *mca_device_transform_memory(struct mca_device *mca_dev,
- void *mem);
-extern int mca_device_claimed(struct mca_device *mca_dev);
-extern void mca_device_set_claim(struct mca_device *mca_dev, int val);
-extern void mca_device_set_name(struct mca_device *mca_dev, const char *name);
-static inline char *mca_device_get_name(struct mca_device *mca_dev)
-{
- return mca_dev ? mca_dev->name : NULL;
-}
-
-extern enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev);
-
-extern struct bus_type mca_bus_type;
-
-extern int mca_register_driver(struct mca_driver *drv);
-extern int mca_register_driver_integrated(struct mca_driver *, int);
-extern void mca_unregister_driver(struct mca_driver *drv);
-
-/* WARNING: only called by the boot time device setup */
-extern int mca_register_device(int bus, struct mca_device *mca_dev);
-
-#ifdef CONFIG_MCA_PROC_FS
-extern void mca_do_proc_init(void);
-extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
-#else
-static inline void mca_do_proc_init(void)
-{
-}
-
-static inline void mca_set_adapter_procfn(int slot, MCA_ProcFn fn, void* dev)
-{
-}
-#endif
-
-#endif /* _LINUX_MCA_H */
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 2c6286c0bc1..f606738d421 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -240,7 +240,7 @@ search_help[] = N_(
"Defined at drivers/pci/Kconfig:47\n"
"Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
"Location:\n"
- " -> Bus options (PCI, PCMCIA, EISA, MCA, ISA)\n"
+ " -> Bus options (PCI, PCMCIA, EISA, ISA)\n"
" -> PCI support (PCI [=y])\n"
" -> PCI access mode (<choice> [=y])\n"
"Selects: LIBCRC32\n"
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index 73070cb0b6d..8c0eb65978c 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -223,7 +223,7 @@ search_help[] = N_(
"Defined at drivers/pci/Kconfig:47\n"
"Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
"Location:\n"
-" -> Bus options (PCI, PCMCIA, EISA, MCA, ISA)\n"
+" -> Bus options (PCI, PCMCIA, EISA, ISA)\n"
" -> PCI support (PCI [ = y])\n"
" -> PCI access mode (<choice> [ = y])\n"
"Selects: LIBCRC32\n"