diff options
79 files changed, 777 insertions, 1041 deletions
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt index 64fc82bc892..0df6acacfae 100644 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ b/Documentation/devicetree/bindings/arm/primecell.txt @@ -16,14 +16,31 @@ Optional properties: - clocks : From common clock binding. First clock is phandle to clock for apb pclk. Additional clocks are optional and specific to those peripherals. - clock-names : From common clock binding. Shall be "apb_pclk" for first clock. +- dmas : From common DMA binding. If present, refers to one or more dma channels. +- dma-names : From common DMA binding, needs to match the 'dmas' property. + Devices with exactly one receive and transmit channel shall name + these "rx" and "tx", respectively. +- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt +- pinctrl-names : Names corresponding to the numbered pinctrl states +- interrupts : one or more interrupt specifiers +- interrupt-names : names corresponding to the interrupts properties Example: serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; arm,primecell-periphid = <0x00341011>; + clocks = <&pclk>; clock-names = "apb_pclk"; - + + dmas = <&dma-controller 4>, <&dma-controller 5>; + dma-names = "rx", "tx"; + + pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; + pinctrl-names = "default","sleep"; + + interrupts = <0 11 0x4>; }; diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt index 95ec7f825ed..2aff154be84 100644 --- a/Documentation/devicetree/bindings/ata/pata-arasan.txt +++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt @@ -6,6 +6,26 @@ Required properties: - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - interrupt: Should contain the CF interrupt number +- clock-frequency: Interface clock rate, in Hz, one of + 25000000 + 33000000 + 40000000 + 50000000 + 66000000 + 75000000 + 100000000 + 125000000 + 150000000 + 166000000 + 200000000 + +Optional properties: +- arasan,broken-udma: if present, UDMA mode is unusable +- arasan,broken-mwdma: if present, MWDMA mode is unusable +- arasan,broken-pio: if present, PIO mode is unusable +- dmas: one DMA channel, as described in bindings/dma/dma.txt + required unless both UDMA and MWDMA mode are broken +- dma-names: the corresponding channel name, must be "data" Example: @@ -14,4 +34,6 @@ Example: reg = <0xfc000000 0x1000>; interrupt-parent = <&vic1>; interrupts = <12>; + dmas = <&dma-controller 23>; + dma-names = "data"; }; diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt new file mode 100644 index 00000000000..5d2e840ae65 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/pl011.txt @@ -0,0 +1,17 @@ +* ARM AMBA Primecell PL011 serial UART + +Required properties: +- compatible: must be "arm,primecell", "arm,pl011" +- reg: exactly one register range with length 0x1000 +- interrupts: exactly one interrupt specifier + +Optional properties: +- pinctrl: When present, must have one state named "sleep" + and one state named "default" +- clocks: When present, must refer to exactly one clock named + "apb_pclk" +- dmas: When present, may have one or two dma channels. + The first one must be named "rx", the second one + must be named "tx". + +See also bindings/arm/primecell.txt diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt index f158fd31cfd..22ed6797216 100644 --- a/Documentation/devicetree/bindings/spi/spi_pl022.txt +++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt @@ -16,6 +16,11 @@ Optional properties: device will be suspended immediately - pl022,rt : indicates the controller should run the message pump with realtime priority to minimise the transfer latency on the bus (boolean) +- dmas : Two or more DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt +- dma-names: Names for the dma channels, if present. There must be at + least one channel named "tx" for transmit and named "rx" for + receive. SPI slave nodes must be children of the SPI master node and can @@ -32,3 +37,34 @@ contain the following properties. - pl022,wait-state : Microwire interface: Wait state - pl022,duplex : Microwire interface: Full/Half duplex + +Example: + + spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 31 0x4>; + dmas = <&dma-controller 23 1>, + <&dma-controller 24 0>; + dma-names = "rx", "tx"; + + m25p80@1 { + compatible = "st,m25p80"; + reg = <1>; + spi-max-frequency = <12000000>; + spi-cpol; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + }; + diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt new file mode 100644 index 00000000000..5cd8eee74af --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,sp804.txt @@ -0,0 +1,29 @@ +ARM sp804 Dual Timers +--------------------------------------- + +Required properties: +- compatible: Should be "arm,sp804" & "arm,primecell" +- interrupts: Should contain the list of Dual Timer interrupts. This is the + interrupt for timer 1 and timer 2. In the case of a single entry, it is + the combined interrupt or if "arm,sp804-has-irq" is present that + specifies which timer interrupt is connected. +- reg: Should contain location and length for dual timer register. +- clocks: clocks driving the dual timer hardware. This list should be 1 or 3 + clocks. With 3 clocks, the order is timer0 clock, timer1 clock, + apb_pclk. A single clock can also be specified if the same clock is + used for all clock inputs. + +Optional properties: +- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this + specifies if the irq connection is for timer 1 or timer 2. A value of 1 + or 2 should be used. + +Example: + + timer0: timer@fc800000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfc800000 0x1000>; + interrupts = <0 0 4>, <0 1 4>; + clocks = <&timclk1 &timclk2 &pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 18bef301d6e..34ef016626f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1059,6 +1059,7 @@ config PLAT_VERSATILE config ARM_TIMER_SP804 bool select CLKSRC_MMIO + select CLKSRC_OF if OF source arch/arm/mm/Kconfig diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e6611eaa288..5f1f4dfd706 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -194,6 +194,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra114-pluto.dtb +dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ + versatile-pb.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index f8f7370e866..bf18a735c37 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,6 +108,7 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21 4 0>; + #dma-cells = <2>; }; pinctrl@fffff200 { @@ -533,6 +534,8 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 4 0>; + dmas = <&dma 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -542,6 +545,8 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 4 0>; + dmas = <&dma 1 13>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index b2961f1ea51..3de8e6dfbcb 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -89,6 +89,8 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 4 0>; + dmas = <&dma 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -110,6 +112,7 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <20 4 0>; + #dma-cells = <2>; }; pinctrl@fffff400 { @@ -378,6 +381,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 4 6>; + dmas = <&dma 1 13>, + <&dma 1 14>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -387,6 +393,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 4 6>; + dmas = <&dma 1 15>, + <&dma 1 16>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 640b3bbbb70..1145ac330fb 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -104,12 +104,14 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <20 4 0>; + #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; interrupts = <21 4 0>; + #dma-cells = <2>; }; pinctrl@fffff400 { @@ -465,6 +467,8 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 4 0>; + dmas = <&dma0 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,6 +478,8 @@ compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; interrupts = <26 4 0>; + dmas = <&dma1 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -535,6 +541,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 4 6>; + dmas = <&dma0 1 7>, + <&dma0 1 8>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -546,6 +555,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 4 6>; + dmas = <&dma1 1 5>, + <&dma1 1 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -557,6 +569,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; interrupts = <11 4 6>; + dmas = <&dma0 1 9>, + <&dma0 1 10>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 8b119399025..ff1aea0ee04 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -24,15 +24,15 @@ }; timer0: timer@13000000 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; timer1: timer@13000100 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; timer2: timer@13000200 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; pic: pic@14000000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 39b0458d365..2e643ea51cc 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -60,6 +60,8 @@ compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; interrupts = <21 4 0>; + dmas = <&dma0 2 0>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; status = "disabled"; @@ -111,6 +113,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; interrupts = <18 4 6>; + dmas = <&dma0 2 7>, + <&dma0 2 8>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; @@ -122,6 +127,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; interrupts = <19 4 6>; + dmas = <&dma0 2 9>, + <&dma0 2 10>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; @@ -167,6 +175,8 @@ compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; interrupts = <22 4 0>; + dmas = <&dma1 2 0>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; status = "disabled"; @@ -178,6 +188,8 @@ compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; interrupts = <23 4 0>; + dmas = <&dma1 2 1>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; status = "disabled"; @@ -294,6 +306,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; interrupts = <20 4 6>; + dmas = <&dma1 2 11>, + <&dma1 2 12>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -348,14 +363,14 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; interrupts = <30 4 0>; - #dma-cells = <1>; + #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; interrupts = <31 4 0>; - #dma-cells = <1>; + #dma-cells = <2>; }; ramc0: ramc@ffffea00 { diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index d2739f8d7ae..6bebfcdcb1d 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -12,7 +12,7 @@ / { model = "Atmel SAMA5D34-EK"; - compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index c511c4772ef..54d128d3568 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -113,6 +113,9 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; + dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */ + <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */ + dma-names = "tx", "rx"; }; thermal@e07008c4 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index b4ca60f4eb4..45597fd9105 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -98,13 +98,24 @@ reg = <0xb2800000 0x1000>; interrupts = <0 29 0x4>; status = "disabled"; + dmas = <&dwdma0 0 0 0 0>; + dma-names = "data"; }; - dma@ea800000 { + dwdma0: dma@ea800000 { compatible = "snps,dma-spear1340"; reg = <0xea800000 0x1000>; interrupts = <0 19 0x4>; status = "disabled"; + + dma-channels = <8>; + #dma-cells = <3>; + dma-requests = <32>; + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + dma-masters = <2>; + data_width = <3 3 0 0>; }; dma@eb000000 { @@ -112,6 +123,15 @@ reg = <0xeb000000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; + + dma-requests = <32>; + dma-channels = <8>; + dma-masters = <2>; + #dma-cells = <3>; + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + data_width = <3 3 0 0>; }; fsmc: flash@b0000000 { @@ -261,6 +281,9 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; + dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */ + <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */ + dma-names = "tx", "rx"; }; rtc@e0580000 { diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e2fe3195c0d..dde75ae8b4b 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -121,6 +121,18 @@ interrupts = <0>; }; + timer@101e2000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x101e2000 0x1000>; + interrupts = <4>; + }; + + timer@101e3000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x101e3000 0x1000>; + interrupts = <5>; + }; + gpio0: gpio@101e4000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x101e4000 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 1420bb14d95..62d9b225dcc 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -98,6 +98,7 @@ <0 49 4>; clocks = <&oscclk2>, <&oscclk2>; clock-names = "timclk", "apb_pclk"; + status = "disabled"; }; watchdog@100e5000 { diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 9d2d3ba339f..ddc74076960 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -25,33 +25,29 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/sched_clock.h> #include <asm/hardware/arm_timer.h> +#include <asm/hardware/timer-sp.h> -static long __init sp804_get_clock_rate(const char *name) +static long __init sp804_get_clock_rate(struct clk *clk) { - struct clk *clk; long rate; int err; - clk = clk_get_sys("sp804", name); - if (IS_ERR(clk)) { - pr_err("sp804: %s clock not found: %d\n", name, - (int)PTR_ERR(clk)); - return PTR_ERR(clk); - } - err = clk_prepare(clk); if (err) { - pr_err("sp804: %s clock failed to prepare: %d\n", name, err); + pr_err("sp804: clock failed to prepare: %d\n", err); clk_put(clk); return err; } err = clk_enable(clk); if (err) { - pr_err("sp804: %s clock failed to enable: %d\n", name, err); + pr_err("sp804: clock failed to enable: %d\n", err); clk_unprepare(clk); clk_put(clk); return err; @@ -59,7 +55,7 @@ static long __init sp804_get_clock_rate(const char *name) rate = clk_get_rate(clk); if (rate < 0) { - pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate); + pr_err("sp804: clock failed to get rate: %ld\n", rate); clk_disable(clk); clk_unprepare(clk); clk_put(clk); @@ -77,9 +73,21 @@ static u32 sp804_read(void) void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name, + struct clk *clk, int use_sched_clock) { - long rate = sp804_get_clock_rate(name); + long rate; + + if (!clk) { + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: clock not found: %d\n", + (int)PTR_ERR(clk)); + return; + } + } + + rate = sp804_get_clock_rate(clk); if (rate < 0) return; @@ -171,12 +179,20 @@ static struct irqaction sp804_timer_irq = { .dev_id = &sp804_clockevent, }; -void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, - const char *name) +void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name) { struct clock_event_device *evt = &sp804_clockevent; - long rate = sp804_get_clock_rate(name); + long rate; + if (!clk) + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: %s clock not found: %d\n", name, + (int)PTR_ERR(clk)); + return; + } + + rate = sp804_get_clock_rate(clk); if (rate < 0) return; @@ -186,6 +202,98 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, evt->irq = irq; evt->cpumask = cpu_possible_mask; + writel(0, base + TIMER_CTRL); + setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); } + +static void __init sp804_of_init(struct device_node *np) +{ + static bool initialized = false; + void __iomem *base; + int irq; + u32 irq_num = 0; + struct clk *clk1, *clk2; + const char *name = of_get_property(np, "compatible", NULL); + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Ensure timers are disabled */ + writel(0, base + TIMER_CTRL); + writel(0, base + TIMER_2_BASE + TIMER_CTRL); + + if (initialized || !of_device_is_available(np)) + goto err; + + clk1 = of_clk_get(np, 0); + if (IS_ERR(clk1)) + clk1 = NULL; + + /* Get the 2nd clock if the timer has 2 timer clocks */ + if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { + clk2 = of_clk_get(np, 1); + if (IS_ERR(clk2)) { + pr_err("sp804: %s clock not found: %d\n", np->name, + (int)PTR_ERR(clk2)); + goto err; + } + } else + clk2 = clk1; + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + goto err; + + of_property_read_u32(np, "arm,sp804-has-irq", &irq_num); + if (irq_num == 2) { + __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name); + __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1); + } else { + __sp804_clockevents_init(base, irq, clk1 , name); + __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE, + name, clk2, 1); + } + initialized = true; + + return; +err: + iounmap(base); +} +CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init); + +static void __init integrator_cp_of_init(struct device_node *np) +{ + static int init_count = 0; + void __iomem *base; + int irq; + const char *name = of_get_property(np, "compatible", NULL); + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Ensure timer is disabled */ + writel(0, base + TIMER_CTRL); + + if (init_count == 2 || !of_device_is_available(np)) + goto err; + + if (!init_count) + sp804_clocksource_init(base, name); + else { + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + goto err; + + sp804_clockevents_init(base, irq, name); + } + + init_count++; + return; +err: + iounmap(base); +} +CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init); diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 7ade91d8cc6..7c1bfc0aea0 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -10,8 +10,7 @@ #include <clocksource/arm_arch_timer.h> #ifdef CONFIG_ARM_ARCH_TIMER -int arch_timer_of_register(void); -int arch_timer_sched_clock_init(void); +int arch_timer_arch_init(void); /* * These register accessors are marked inline so the compiler can @@ -110,16 +109,6 @@ static inline void __cpuinit arch_counter_set_user_access(void) asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); } -#else -static inline int arch_timer_of_register(void) -{ - return -ENXIO; -} - -static inline int arch_timer_sched_clock_init(void) -{ - return -ENXIO; -} #endif #endif diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h index 2dd9d3f83f2..bb28af7c32d 100644 --- a/arch/arm/include/asm/hardware/timer-sp.h +++ b/arch/arm/include/asm/hardware/timer-sp.h @@ -1,15 +1,23 @@ +struct clk; + void __sp804_clocksource_and_sched_clock_init(void __iomem *, - const char *, int); + const char *, struct clk *, int); +void __sp804_clockevents_init(void __iomem *, unsigned int, + struct clk *, const char *); static inline void sp804_clocksource_init(void __iomem *base, const char *name) { - __sp804_clocksource_and_sched_clock_init(base, name, 0); + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0); } static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name) { - __sp804_clocksource_and_sched_clock_init(base, name, 1); + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1); } -void sp804_clockevents_init(void __iomem *, unsigned int, const char *); +static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name) +{ + __sp804_clockevents_init(base, irq, NULL, name); + +} diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f75726343..3d520ddca61 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -11,4 +11,6 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern unsigned long long (*sched_clock_func)(void); + #endif diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index d957a51435d..59dcdced6e3 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -22,9 +22,11 @@ static unsigned long arch_timer_read_counter_long(void) return arch_timer_read_counter(); } -static u32 arch_timer_read_counter_u32(void) +static u32 sched_clock_mult __read_mostly; + +static unsigned long long notrace arch_timer_sched_clock(void) { - return arch_timer_read_counter(); + return arch_timer_read_counter() * sched_clock_mult; } static struct delay_timer arch_delay_timer; @@ -37,25 +39,20 @@ static void __init arch_timer_delay_timer_register(void) register_current_timer_delay(&arch_delay_timer); } -int __init arch_timer_of_register(void) +int __init arch_timer_arch_init(void) { - int ret; + u32 arch_timer_rate = arch_timer_get_rate(); - ret = arch_timer_init(); - if (ret) - return ret; + if (arch_timer_rate == 0) + return -ENXIO; arch_timer_delay_timer_register(); - return 0; -} - -int __init arch_timer_sched_clock_init(void) -{ - if (arch_timer_get_rate() == 0) - return -ENXIO; + /* Cache the sched_clock multiplier to save a divide in the hot path. */ + sched_clock_mult = NSEC_PER_SEC / arch_timer_rate; + sched_clock_func = arch_timer_sched_clock; + pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n", + arch_timer_rate / 1000, sched_clock_mult); - setup_sched_clock(arch_timer_read_counter_u32, - 32, arch_timer_get_rate()); return 0; } diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 59d2adb764a..e8edcaa0e43 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -20,6 +20,7 @@ struct clock_data { u64 epoch_ns; u32 epoch_cyc; u32 epoch_cyc_copy; + unsigned long rate; u32 mult; u32 shift; bool suspended; @@ -113,11 +114,14 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) u64 res, wrap; char r_unit; + if (cd.rate > rate) + return; + BUG_ON(bits > 32); WARN_ON(!irqs_disabled()); - WARN_ON(read_sched_clock != jiffy_sched_clock_read); read_sched_clock = read; sched_clock_mask = (1 << bits) - 1; + cd.rate = rate; /* calculate the mult/shift to convert counter ticks to ns. */ clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0); @@ -161,12 +165,19 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) pr_debug("Registered %pF as sched_clock source\n", read); } -unsigned long long notrace sched_clock(void) +static unsigned long long notrace sched_clock_32(void) { u32 cyc = read_sched_clock(); return cyc_to_sched_clock(cyc, sched_clock_mask); } +unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32; + +unsigned long long notrace sched_clock(void) +{ + return sched_clock_func(); +} + void __init sched_clock_postinit(void) { /* diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 955d92d265e..abff4e9aaee 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -22,6 +22,7 @@ #include <linux/errno.h> #include <linux/profile.h> #include <linux/timer.h> +#include <linux/clocksource.h> #include <linux/irq.h> #include <asm/thread_info.h> @@ -115,6 +116,10 @@ int __init register_persistent_clock(clock_access_fn read_boot, void __init time_init(void) { - machine_desc->init_time(); + if (machine_desc->init_time) + machine_desc->init_time(); + else + clocksource_of_init(); + sched_clock_postinit(); } diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 48f1228c611..69f9e3bbf4e 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -36,6 +36,8 @@ static int at91_enter_idle(struct cpuidle_device *dev, at91rm9200_standby(); else if (cpu_is_at91sam9g45()) at91sam9g45_standby(); + else if (cpu_is_at91sam9263()) + at91sam9263_standby(); else at91sam9_standby(); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0f3379fe645..d3d7b993846 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -86,7 +86,7 @@ enum at91_soc_type { AT91_SOC_SAMA5D3, /* Unknown type */ - AT91_SOC_NONE + AT91_SOC_UNKNOWN, }; enum at91_soc_subtype { @@ -107,8 +107,11 @@ enum at91_soc_subtype { AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, AT91_SOC_SAMA5D35, + /* No subtype for this SoC */ + AT91_SOC_SUBTYPE_NONE, + /* Unknown subtype */ - AT91_SOC_SUBTYPE_NONE + AT91_SOC_SUBTYPE_UNKNOWN, }; struct at91_socinfo { @@ -122,7 +125,7 @@ const char *at91_get_soc_subtype(struct at91_socinfo *c); static inline int at91_soc_is_detected(void) { - return at91_soc_initdata.type != AT91_SOC_NONE; + return at91_soc_initdata.type != AT91_SOC_UNKNOWN; } #ifdef CONFIG_SOC_AT91RM9200 diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 73f1f250403..530db304ec5 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -270,6 +270,8 @@ static int at91_pm_enter(suspend_state_t state) at91rm9200_standby(); else if (cpu_is_at91sam9g45()) at91sam9g45_standby(); + else if (cpu_is_at91sam9263()) + at91sam9263_standby(); else at91sam9_standby(); break; diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 38f467c6b71..2f5908f0b8c 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -70,13 +70,31 @@ static inline void at91sam9g45_standby(void) at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#ifdef CONFIG_SOC_AT91SAM9263 -/* - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; - * handle those cases both here and in the Suspend-To-RAM support. +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. */ -#warning Assuming EB1 SDRAM controller is *NOT* used -#endif +static inline void at91sam9263_standby(void) +{ + u32 lpr0, lpr1; + u32 saved_lpr0, saved_lpr1; + + saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); + lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; + lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); + lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; + lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); + at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); + at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); +} static inline void at91sam9_standby(void) { diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e8491e77b1f..e2f4bdd146d 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,28 +105,32 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; case ARCH_ID_AT91SAM9260: at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9260_soc; break; case ARCH_ID_AT91SAM9261: at91_soc_initdata.type = AT91_SOC_SAM9261; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9261_soc; break; case ARCH_ID_AT91SAM9263: at91_soc_initdata.type = AT91_SOC_SAM9263; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9263_soc; break; case ARCH_ID_AT91SAM9G20: at91_soc_initdata.type = AT91_SOC_SAM9G20; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9260_soc; break; @@ -139,6 +143,7 @@ static void __init soc_detect(u32 dbgu_base) case ARCH_ID_AT91SAM9RL64: at91_soc_initdata.type = AT91_SOC_SAM9RL; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9rl_soc; break; @@ -161,6 +166,7 @@ static void __init soc_detect(u32 dbgu_base) /* at91sam9g10 */ if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9261_soc; } /* at91sam9xe */ @@ -242,7 +248,7 @@ static const char *soc_name[] = { [AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9N12] = "at91sam9n12", [AT91_SOC_SAMA5D3] = "sama5d3", - [AT91_SOC_NONE] = "Unknown" + [AT91_SOC_UNKNOWN] = "Unknown", }; const char *at91_get_soc_type(struct at91_socinfo *c) @@ -268,7 +274,8 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAMA5D33] = "sama5d33", [AT91_SOC_SAMA5D34] = "sama5d34", [AT91_SOC_SAMA5D35] = "sama5d35", - [AT91_SOC_SUBTYPE_NONE] = "Unknown" + [AT91_SOC_SUBTYPE_NONE] = "None", + [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", }; const char *at91_get_soc_subtype(struct at91_socinfo *c) @@ -282,8 +289,8 @@ void __init at91_map_io(void) /* Map peripherals */ iotable_init(&at91_io_desc, 1); - at91_soc_initdata.type = AT91_SOC_NONE; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; + at91_soc_initdata.type = AT91_SOC_UNKNOWN; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; soc_detect(AT91_BASE_DBGU0); if (!at91_soc_is_detected()) @@ -294,8 +301,9 @@ void __init at91_map_io(void) pr_info("AT91: Detected soc type: %s\n", at91_get_soc_type(&at91_soc_initdata)); - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); + if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); if (!at91_soc_is_enabled()) panic("AT91: Soc not enabled"); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 76c1170b352..e7df2dd43a4 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -15,6 +15,7 @@ */ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/irq.h> @@ -28,12 +29,9 @@ #include <linux/amba/bus.h> #include <linux/clk-provider.h> -#include <asm/arch_timer.h> #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/smp_plat.h> -#include <asm/hardware/arm_timer.h> -#include <asm/hardware/timer-sp.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -90,36 +88,16 @@ static void __init highbank_init_irq(void) #endif } -static struct clk_lookup lookup = { - .dev_id = "sp804", - .con_id = NULL, -}; - static void __init highbank_timer_init(void) { - int irq; struct device_node *np; - void __iomem *timer_base; /* Map system registers */ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); sregs_base = of_iomap(np, 0); WARN_ON(!sregs_base); - np = of_find_compatible_node(NULL, NULL, "arm,sp804"); - timer_base = of_iomap(np, 0); - WARN_ON(!timer_base); - irq = irq_of_parse_and_map(np, 0); - of_clk_init(NULL); - lookup.clk = of_clk_get(np, 0); - clkdev_add(&lookup); - - sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); - sp804_clockevents_init(timer_base, irq, "timer0"); - - arch_timer_of_register(); - arch_timer_sched_clock_init(); clocksource_of_init(); } diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index da1091be088..8c60fcb08a9 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -250,39 +250,6 @@ static void __init intcp_init_early(void) } #ifdef CONFIG_OF - -static void __init cp_of_timer_init(void) -{ - struct device_node *node; - const char *path; - void __iomem *base; - int err; - int irq; - - err = of_property_read_string(of_aliases, - "arm,timer-primary", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - base = of_iomap(node, 0); - if (WARN_ON(!base)) - return; - writel(0, base + TIMER_CTRL); - sp804_clocksource_init(base, node->name); - - err = of_property_read_string(of_aliases, - "arm,timer-secondary", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - base = of_iomap(node, 0); - if (WARN_ON(!base)) - return; - irq = irq_of_parse_and_map(node, 0); - writel(0, base + TIMER_CTRL); - sp804_clockevents_init(base, irq, node->name); -} - static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -383,7 +350,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, - .init_time = cp_of_timer_init, .init_machine = intcp_init_of, .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index ba769e082ad..2d04f0e2187 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -5,6 +5,6 @@ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o +obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 12d3655830d..42a4cb3087e 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -20,6 +20,8 @@ #include <linux/clk/mvebu.h> #include <linux/dma-mapping.h> #include <linux/mbus.h> +#include <linux/irqchip.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -72,6 +74,10 @@ void __init armada_370_xp_init_early(void) ARMADA_370_XP_MBUS_WINS_SIZE, ARMADA_370_XP_SDRAM_WINS_BASE, ARMADA_370_XP_SDRAM_WINS_SIZE); + +#ifdef CONFIG_CACHE_L2X0 + l2x0_of_init(0, ~0UL); +#endif } static void __init armada_370_xp_dt_init(void) @@ -90,8 +96,7 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .init_machine = armada_370_xp_dt_init, .map_io = armada_370_xp_map_io, .init_early = armada_370_xp_init_early, - .init_irq = armada_370_xp_init_irq, - .handle_irq = armada_370_xp_handle_irq, + .init_irq = irqchip_init, .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 5b86423c89f..244d8a5aa54 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -108,24 +108,13 @@ static struct platform_device *sdp2430_devices[] __initdata = { #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 -static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1); - - return 0; -} - -static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0); -} - static struct panel_generic_dpi_data sdp2430_panel_data = { .name = "nec_nl2432dr22-11b", - .platform_enable = sdp2430_panel_enable_lcd, - .platform_disable = sdp2430_panel_disable_lcd, + .num_gpios = 2, + .gpios = { + SDP2430_LCD_PANEL_ENABLE_GPIO, + SDP2430_LCD_PANEL_BACKLIGHT_GPIO, + }, }; static struct omap_dss_device sdp2430_lcd_device = { @@ -146,26 +135,6 @@ static struct omap_dss_board_info sdp2430_dss_data = { .default_device = &sdp2430_lcd_device, }; -static void __init sdp2430_display_init(void) -{ - int r; - - static struct gpio gpios[] __initdata = { - { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, - "LCD reset" }, - { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, - "LCD Backlight" }, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } - - omap_display_init(&sdp2430_dss_data); -} - #if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { @@ -273,7 +242,7 @@ static void __init omap_2430sdp_init(void) gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, "Secondary LCD backlight"); - sdp2430_display_init(); + omap_display_init(&sdp2430_dss_data); } MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a4d4664894e..23b004afa3f 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -108,53 +108,38 @@ static struct twl4030_keypad_data sdp3430_kp_data = { #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static struct gpio sdp3430_dss_gpios[] __initdata = { - {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, - {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, -}; - static void __init sdp3430_display_init(void) { int r; - r = gpio_request_array(sdp3430_dss_gpios, - ARRAY_SIZE(sdp3430_dss_gpios)); + /* + * the backlight GPIO doesn't directly go to the panel, it enables + * an internal circuit on 3430sdp to create the signal V_BKL_28V, + * this is connected to LED+ pin of the sharp panel. This GPIO + * is left enabled in the board file, and not passed to the panel + * as platform_data. + */ + r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, + GPIOF_OUT_INIT_HIGH, "LCD Backlight"); if (r) - printk(KERN_ERR "failed to get LCD control GPIOs\n"); - -} + pr_err("failed to get LCD Backlight GPIO\n"); -static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); - - return 0; -} - -static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); -} - -static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) -{ } +static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = { + .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, + .ini_gpio = -1, + .mo_gpio = -1, + .lr_gpio = -1, + .ud_gpio = -1, +}; static struct omap_dss_device sdp3430_lcd_device = { .name = "lcd", .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 16, - .platform_enable = sdp3430_panel_enable_lcd, - .platform_disable = sdp3430_panel_disable_lcd, + .data = &sdp3430_lcd_data, }; static struct tfp410_platform_data dvi_panel = { @@ -175,8 +160,6 @@ static struct omap_dss_device sdp3430_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = sdp3430_panel_enable_tv, - .platform_disable = sdp3430_panel_disable_tv, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 00d72902ef4..56a9a4f855c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void) omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto"); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index c29d2e74368..d63f14b534b 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -120,63 +120,14 @@ static int __init am3517_evm_i2c_init(void) return 0; } -static int lcd_enabled; -static int dvi_enabled; - -#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ - defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) -static struct gpio am3517_evm_dss_gpios[] __initdata = { - /* GPIO 182 = LCD Backlight Power */ - { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, - /* GPIO 181 = LCD Panel PWM */ - { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, - /* GPIO 176 = LCD Panel Power enable pin */ - { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, -}; - -static void __init am3517_evm_display_init(void) -{ - int r; - - omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - - r = gpio_request_array(am3517_evm_dss_gpios, - ARRAY_SIZE(am3517_evm_dss_gpios)); - if (r) { - printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); - return; - } - - printk(KERN_INFO "Display initialized successfully\n"); -} -#else -static void __init am3517_evm_display_init(void) {} -#endif - -static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(LCD_PANEL_PWR, 1); - lcd_enabled = 1; - - return 0; -} - -static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(LCD_PANEL_PWR, 0); - lcd_enabled = 0; -} - static struct panel_generic_dpi_data lcd_panel = { .name = "sharp_lq", - .platform_enable = am3517_evm_panel_enable_lcd, - .platform_disable = am3517_evm_panel_disable_lcd, + .num_gpios = 3, + .gpios = { + LCD_PANEL_PWR, + LCD_PANEL_BKLIGHT_PWR, + LCD_PANEL_PWM, + }, }; static struct omap_dss_device am3517_evm_lcd_device = { @@ -187,22 +138,11 @@ static struct omap_dss_device am3517_evm_lcd_device = { .phy.dpi.data_lines = 16, }; -static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device am3517_evm_tv_device = { .type = OMAP_DISPLAY_TYPE_VENC, .name = "tv", .driver_name = "venc", .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = am3517_evm_panel_enable_tv, - .platform_disable = am3517_evm_panel_disable_tv, }; static struct tfp410_platform_data dvi_panel = { @@ -365,8 +305,6 @@ static void __init am3517_evm_init(void) usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); - /* DSS */ - am3517_evm_display_init(); /* RTC - S35390A */ am3517_evm_rtc_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e0ed8c07fc5..ee6218c7480 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -190,45 +190,12 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_enabled; -static int dvi_enabled; - -static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_LCD_EN_GPIO, 1); - gpio_set_value(CM_T35_LCD_BL_GPIO, 1); - - lcd_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - lcd_enabled = 0; - - gpio_set_value(CM_T35_LCD_BL_GPIO, 0); - gpio_set_value(CM_T35_LCD_EN_GPIO, 0); -} - -static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct panel_generic_dpi_data lcd_panel = { .name = "toppoly_tdo35s", - .platform_enable = cm_t35_panel_enable_lcd, - .platform_disable = cm_t35_panel_disable_lcd, + .num_gpios = 1, + .gpios = { + CM_T35_LCD_BL_GPIO, + }, }; static struct omap_dss_device cm_t35_lcd_device = { @@ -257,8 +224,6 @@ static struct omap_dss_device cm_t35_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = cm_t35_panel_enable_tv, - .platform_disable = cm_t35_panel_disable_tv, }; static struct omap_dss_device *cm_t35_dss_devices[] = { @@ -292,11 +257,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; -static struct gpio cm_t35_dss_gpios[] __initdata = { - { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, - { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, -}; - static void __init cm_t35_init_display(void) { int err; @@ -304,23 +264,21 @@ static void __init cm_t35_init_display(void) spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request_array(cm_t35_dss_gpios, - ARRAY_SIZE(cm_t35_dss_gpios)); + + err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, + "lcd bl enable"); if (err) { - pr_err("CM-T35: failed to request DSS control GPIOs\n"); + pr_err("CM-T35: failed to request LCD EN GPIO\n"); return; } - gpio_export(CM_T35_LCD_EN_GPIO, 0); - gpio_export(CM_T35_LCD_BL_GPIO, 0); - msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); + gpio_free(CM_T35_LCD_EN_GPIO); } } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e44b804f75a..57642054417 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -103,19 +103,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -127,8 +114,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { static struct panel_generic_dpi_data lcd_panel = { .name = "innolux_at070tn83", - .platform_enable = devkit8000_panel_enable_lcd, - .platform_disable = devkit8000_panel_disable_lcd, + /* gpios filled in code */ }; static struct omap_dss_device devkit8000_lcd_device = { @@ -210,8 +196,6 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); @@ -220,13 +204,8 @@ static int devkit8000_twl_gpio_setup(struct device *dev, gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; - ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "LCD_PWREN"); - if (ret < 0) { - devkit8000_lcd_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); - } + lcd_panel.num_gpios = 1; + lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ dvi_panel.power_down_gpio = gpio + 7; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 8a8e505a0e9..d0d17bc58d9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -181,34 +181,13 @@ static inline void __init ldp_init_smsc911x(void) /* LCD */ -static int ldp_backlight_gpio; -static int ldp_lcd_enable_gpio; - #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 -static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 1); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 1); - - return 0; -} - -static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 0); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 0); -} - static struct panel_generic_dpi_data ldp_panel_data = { .name = "nec_nl2432dr22-11b", - .platform_enable = ldp_panel_enable_lcd, - .platform_disable = ldp_panel_disable_lcd, + .num_gpios = 4, + /* gpios filled in code */ }; static struct omap_dss_device ldp_lcd_device = { @@ -231,41 +210,19 @@ static struct omap_dss_board_info ldp_dss_data = { static void __init ldp_display_init(void) { - int r; - - static struct gpio gpios[] __initdata = { - {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, - {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } + ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO; + ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO; omap_display_init(&ldp_dss_data); } static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; - - struct gpio gpios[] = { - {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"}, - {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - ldp_backlight_gpio = -EINVAL; - ldp_lcd_enable_gpio = -EINVAL; - return r; - } - - ldp_backlight_gpio = gpio + 15; - ldp_lcd_enable_gpio = gpio + 7; + ldp_panel_data.gpios[0] = gpio + 7; + ldp_panel_data.gpio_invert[0] = true; + + ldp_panel_data.gpios[1] = gpio + 15; + ldp_panel_data.gpio_invert[1] = true; return 0; } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4f1bbc3cc29..f76d0de7b40 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -155,61 +155,43 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_LR 2 #define OMAP3EVM_LCD_PANEL_UD 3 #define OMAP3EVM_LCD_PANEL_INI 152 -#define OMAP3EVM_LCD_PANEL_ENVDD 153 #define OMAP3EVM_LCD_PANEL_QVGA 154 #define OMAP3EVM_LCD_PANEL_RESB 155 + +#define OMAP3EVM_LCD_PANEL_ENVDD 153 #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 + +/* + * OMAP3EVM DVI control signals + */ #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 -static struct gpio omap3_evm_dss_gpios[] __initdata = { - { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, - { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, - { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, - { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, - { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, - { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = { + .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, + .ini_gpio = OMAP3EVM_LCD_PANEL_INI, + .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, + .lr_gpio = OMAP3EVM_LCD_PANEL_LR, + .ud_gpio = OMAP3EVM_LCD_PANEL_UD, }; -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_evm_display_init(void) { int r; - r = gpio_request_array(omap3_evm_dss_gpios, - ARRAY_SIZE(omap3_evm_dss_gpios)); + r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, + "lcd_panel_envdd"); if (r) - printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); -} + pr_err("failed to get lcd_panel_envdd GPIO\n"); -static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0); + r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, + GPIOF_OUT_INIT_LOW, "lcd_panel_bklight"); + if (r) + pr_err("failed to get lcd_panel_bklight GPIO\n"); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); else gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); - - lcd_enabled = 1; - return 0; -} - -static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1); - - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); - else - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); - - lcd_enabled = 0; } static struct omap_dss_device omap3_evm_lcd_device = { @@ -217,26 +199,14 @@ static struct omap_dss_device omap3_evm_lcd_device = { .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 18, - .platform_enable = omap3_evm_enable_lcd, - .platform_disable = omap3_evm_disable_lcd, + .data = &omap3_evm_lcd_data, }; -static int omap3_evm_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_evm_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device omap3_evm_tv_device = { .name = "tv", .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = omap3_evm_enable_tv, - .platform_disable = omap3_evm_disable_tv, }; static struct tfp410_platform_data dvi_panel = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1004d2aaa68..28133d5b4fe 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -44,6 +44,7 @@ #include "common.h" #include <video/omapdss.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "mux.h" @@ -230,12 +231,16 @@ static struct twl4030_keypad_data pandora_kp_data = { .rep = 1, }; +static struct panel_tpo_td043_data lcd_data = { + .nreset_gpio = 157, +}; + static struct omap_dss_device pandora_lcd_device = { .name = "lcd", .driver_name = "tpo_td043mtea1_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, - .reset_gpio = 157, + .data = &lcd_data, }; static struct omap_dss_device pandora_tv_device = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 8afbba0923d..d37e6b187ae 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -94,15 +94,6 @@ static void __init omap3_stalker_display_init(void) return; } -static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device omap3_stalker_tv_device = { .name = "tv", .driver_name = "venc", @@ -112,8 +103,6 @@ static struct omap_dss_device omap3_stalker_tv_device = { #elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, #endif - .platform_enable = omap3_stalker_enable_tv, - .platform_disable = omap3_stalker_disable_tv, }; static struct tfp410_platform_data dvi_panel = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index a71ad345f20..1e2c75eee91 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -435,7 +435,7 @@ static void __init omap4_panda_init(void) omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto"); usb_musb_init(&musb_board_data); omap4_panda_display_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f9101407cd5..4ca6b680aa7 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -145,28 +145,9 @@ static inline void __init overo_init_smsc911x(void) { return; } #endif /* DSS */ -static int lcd_enabled; -static int dvi_enabled; - #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 -static struct gpio overo_dss_gpios[] __initdata = { - { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, - { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, -}; - -static void __init overo_display_init(void) -{ - if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { - printk(KERN_ERR "could not obtain DSS control GPIOs\n"); - return; - } - - gpio_export(OVERO_GPIO_LCD_EN, 0); - gpio_export(OVERO_GPIO_LCD_BL, 0); -} - static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, .power_down_gpio = -1, @@ -187,30 +168,13 @@ static struct omap_dss_device overo_tv_device = { .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, }; -static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - - gpio_set_value(OVERO_GPIO_LCD_EN, 1); - gpio_set_value(OVERO_GPIO_LCD_BL, 1); - lcd_enabled = 1; - return 0; -} - -static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(OVERO_GPIO_LCD_EN, 0); - gpio_set_value(OVERO_GPIO_LCD_BL, 0); - lcd_enabled = 0; -} - static struct panel_generic_dpi_data lcd43_panel = { .name = "samsung_lte430wq_f0c", - .platform_enable = overo_panel_enable_lcd, - .platform_disable = overo_panel_disable_lcd, + .num_gpios = 2, + .gpios = { + OVERO_GPIO_LCD_EN, + OVERO_GPIO_LCD_BL + }, }; static struct omap_dss_device overo_lcd43_device = { @@ -223,13 +187,20 @@ static struct omap_dss_device overo_lcd43_device = { #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct panel_generic_dpi_data lcd35_panel = { + .num_gpios = 2, + .gpios = { + OVERO_GPIO_LCD_EN, + OVERO_GPIO_LCD_BL + }, +}; + static struct omap_dss_device overo_lcd35_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "lcd35", .driver_name = "lgphilips_lb035q02_panel", .phy.dpi.data_lines = 24, - .platform_enable = overo_panel_enable_lcd, - .platform_disable = overo_panel_disable_lcd, + .data = &lcd35_panel, }; #endif @@ -508,7 +479,6 @@ static void __init overo_init(void) usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); - overo_display_init(); overo_init_led(); overo_init_keys(); omap_twl4030_audio_init("overo", NULL); diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index eb667261df0..bd74f9f6063 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -16,6 +16,8 @@ #include <linux/mm.h> #include <asm/mach-types.h> #include <video/omapdss.h> +#include <video/omap-panel-data.h> + #include <linux/platform_data/spi-omap2-mcspi.h> #include "soc.h" @@ -27,25 +29,16 @@ #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) -static int rx51_lcd_enable(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 1); - return 0; -} - -static void rx51_lcd_disable(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 0); -} +static struct panel_acx565akm_data lcd_data = { + .reset_gpio = RX51_LCD_RESET_GPIO, +}; static struct omap_dss_device rx51_lcd_device = { .name = "lcd", .driver_name = "panel-acx565akm", .type = OMAP_DISPLAY_TYPE_SDI, .phy.sdi.datapairs = 2, - .reset_gpio = RX51_LCD_RESET_GPIO, - .platform_enable = rx51_lcd_enable, - .platform_disable = rx51_lcd_disable, + .data = &lcd_data, }; static struct omap_dss_device rx51_tv_device = { @@ -76,13 +69,8 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "LCD ACX565AKM reset")) { - pr_err("%s failed to get LCD Reset GPIO\n", __func__); - return 0; - } - omap_display_init(&rx51_dss_board_info); + return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 9a7174faac5..c2a079cb76f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -15,8 +15,9 @@ #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include "board-zoom.h" +#include <video/omap-panel-data.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" @@ -24,37 +25,17 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 -static struct gpio zoom_lcd_gpios[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, - { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +static struct panel_nec_nl8048_data zoom_lcd_data = { + /* res_gpio filled in code */ + .qvga_gpio = LCD_PANEL_QVGA_GPIO, }; -static void __init zoom_lcd_panel_init(void) -{ - zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? - LCD_PANEL_RESET_GPIO_PROD : - LCD_PANEL_RESET_GPIO_PILOT; - - if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) - pr_err("%s: Failed to get LCD GPIOs.\n", __func__); -} - -static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device zoom_lcd_device = { .name = "lcd", .driver_name = "NEC_8048_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, - .platform_enable = zoom_panel_enable_lcd, - .platform_disable = zoom_panel_disable_lcd, + .data = &zoom_lcd_data, }; static struct omap_dss_device *zoom_dss_devices[] = { @@ -67,6 +48,13 @@ static struct omap_dss_board_info zoom_dss_data = { .default_device = &zoom_lcd_device, }; +static void __init zoom_lcd_panel_init(void) +{ + zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + LCD_PANEL_RESET_GPIO_PROD : + LCD_PANEL_RESET_GPIO_PILOT; +} + static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, }; diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 9c49bbe825f..393aeefaebb 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -52,7 +52,6 @@ static struct omap_dss_device omap4_panda_dvi_device = { .driver_name = "tfp410", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, .channel = OMAP_DSS_CHANNEL_LCD2, }; @@ -177,45 +176,12 @@ static struct picodlp_panel_data sdp4430_picodlp_pdata = { .pwrgood_gpio = 45, }; -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - static struct omap_dss_device sdp4430_picodlp_device = { .name = "picodlp", .driver_name = "picodlp_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, .data = &sdp4430_picodlp_pdata, }; @@ -232,17 +198,26 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; +/* + * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO. + * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails + * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is + * selected by default + */ void __init omap_4430sdp_display_init(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); /* * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and @@ -262,12 +237,15 @@ void __init omap_4430sdp_display_init_of(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 02e1d56a3fe..05481490a50 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -46,7 +46,6 @@ #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include <asm/arch_timer.h> #include "omap_hwmod.h" #include "omap_device.h" #include <plat/counter-32k.h> @@ -627,14 +626,10 @@ void __init omap4_local_timer_init(void) #ifdef CONFIG_SOC_OMAP5 void __init omap5_realtime_timer_init(void) { - int err; - omap4_sync32k_timer_init(); realtime_counter_init(); - err = arch_timer_of_register(); - if (err) - pr_err("%s: arch_timer_register failed %d\n", __func__, err); + clocksource_of_init(); } #endif /* CONFIG_SOC_OMAP5 */ diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index c254782aa72..c016ccd9243 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -90,6 +90,5 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, - .init_time = shmobile_timer_init, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index e4545c15272..899a86c31ec 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -456,7 +456,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, .init_machine = emev2_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 228d7aba4a7..326a4ab0bd5 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -1030,7 +1030,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .init_early = r8a7740_add_early_devices_dt, .init_irq = r8a7740_init_irq, .init_machine = r8a7740_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 59c7146bf66..5502d624aca 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1175,7 +1175,6 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)") .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = sh7372_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = sh7372_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index e8cd93a5c55..fdf3894b1cc 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -1037,7 +1037,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 3d16d4dff01..f321dbeb237 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -19,10 +19,8 @@ * */ #include <linux/platform_device.h> +#include <linux/clocksource.h> #include <linux/delay.h> -#include <asm/arch_timer.h> -#include <asm/mach/time.h> -#include <asm/smp_twd.h> void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div) @@ -63,6 +61,5 @@ void __init shmobile_earlytimer_init(void) void __init shmobile_timer_init(void) { - arch_timer_of_register(); - arch_timer_sched_clock_init(); + clocksource_of_init(); } diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile index af9bffb94f1..a946c19ab31 100644 --- a/arch/arm/mach-spear/Makefile +++ b/arch/arm/mach-spear/Makefile @@ -7,10 +7,10 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include # Common support obj-y := restart.o time.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +smp-$(CONFIG_SMP) += headsmp.o platsmp.o +smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o +obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o $(smp-y) obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index 8ba7e75b648..a9fd45362fe 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -22,11 +22,6 @@ extern void spear13xx_timer_init(void); extern void spear3xx_timer_init(void); extern struct pl022_ssp_controller pl022_plat_data; extern struct pl08x_platform_data pl080_plat_data; -extern struct dw_dma_platform_data dmac_plat_data; -extern struct dw_dma_slave cf_dma_priv; -extern struct dw_dma_slave nand_read_dma_priv; -extern struct dw_dma_slave nand_write_dma_priv; -bool dw_dma_filter(struct dma_chan *chan, void *slave); void __init spear_setup_of_timer(void); void __init spear3xx_clk_init(void __iomem *misc_base, diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h index 374ddc393df..cf3a5369eec 100644 --- a/arch/arm/mach-spear/include/mach/spear.h +++ b/arch/arm/mach-spear/include/mach/spear.h @@ -82,8 +82,6 @@ #define VA_L2CC_BASE IOMEM(UL(0xFB000000)) /* others */ -#define DMAC0_BASE UL(0xEA800000) -#define DMAC1_BASE UL(0xEB000000) #define MCIF_CF_BASE UL(0xB2800000) /* Debug uart for linux, will be used for debug and uncompress messages */ diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index ed3b5c287a7..9eaac2c881e 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -23,40 +23,12 @@ #include <mach/spear.h> /* Base addresses */ -#define SPEAR1310_SSP1_BASE UL(0x5D400000) -#define SPEAR1310_SATA0_BASE UL(0xB1000000) -#define SPEAR1310_SATA1_BASE UL(0xB1800000) -#define SPEAR1310_SATA2_BASE UL(0xB4000000) - #define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) #define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000) -static struct arasan_cf_pdata cf_pdata = { - .cf_if_clk = CF_IF_CLK_166M, - .quirk = CF_BROKEN_UDMA, - .dma_priv = &cf_dma_priv, -}; - -/* ssp device registration */ -static struct pl022_ssp_controller ssp1_plat_data = { - .enable_dma = 0, -}; - -/* Add SPEAr1310 auxdata to pass platform data */ -static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), - - OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data), - {} -}; - static void __init spear1310_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - spear1310_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const spear1310_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 75e38644bbf..a04a7fe76f7 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -16,18 +16,16 @@ #include <linux/ahci_platform.h> #include <linux/amba/serial.h> #include <linux/delay.h> -#include <linux/dw_dmac.h> #include <linux/of_platform.h> #include <linux/irqchip.h> #include <asm/mach/arch.h> #include "generic.h" #include <mach/spear.h> -#include "spear13xx-dma.h" +/* FIXME: Move SATA PHY code into a standalone driver */ /* Base addresses */ #define SPEAR1340_SATA_BASE UL(0xB1000000) -#define SPEAR1340_UART1_BASE UL(0xB4100000) /* Power Management Registers */ #define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100) @@ -79,28 +77,6 @@ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) -static struct dw_dma_slave uart1_dma_param[] = { - { - /* Tx */ - .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX), - .cfg_lo = 0, - .src_master = DMA_MASTER_MEMORY, - .dst_master = SPEAR1340_DMA_MASTER_UART1, - }, { - /* Rx */ - .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX), - .cfg_lo = 0, - .src_master = SPEAR1340_DMA_MASTER_UART1, - .dst_master = DMA_MASTER_MEMORY, - } -}; - -static struct amba_pl011_data uart1_data = { - .dma_filter = dw_dma_filter, - .dma_tx_param = &uart1_dma_param[0], - .dma_rx_param = &uart1_dma_param[1], -}; - /* SATA device registration */ static int sata_miphy_init(struct device *dev, void __iomem *addr) { @@ -159,14 +135,8 @@ static struct ahci_platform_data sata_pdata = { /* Add SPEAr1340 auxdata to pass platform data */ static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL, &sata_pdata), - OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data), {} }; diff --git a/arch/arm/mach-spear/spear13xx-dma.h b/arch/arm/mach-spear/spear13xx-dma.h deleted file mode 100644 index d50bdb60592..00000000000 --- a/arch/arm/mach-spear/spear13xx-dma.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/dma.h - * - * DMA information for SPEAr13xx machine family - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* request id of all the peripherals */ -enum dma_master_info { - /* Accessible from only one master */ - DMA_MASTER_MCIF = 0, - DMA_MASTER_FSMC = 1, - /* Accessible from both 0 & 1 */ - DMA_MASTER_MEMORY = 0, - DMA_MASTER_ADC = 0, - DMA_MASTER_UART0 = 0, - DMA_MASTER_SSP0 = 0, - DMA_MASTER_I2C0 = 0, - -#ifdef CONFIG_MACH_SPEAR1310 - /* Accessible from only one master */ - SPEAR1310_DMA_MASTER_JPEG = 1, - - /* Accessible from both 0 & 1 */ - SPEAR1310_DMA_MASTER_I2S = 0, - SPEAR1310_DMA_MASTER_UART1 = 0, - SPEAR1310_DMA_MASTER_UART2 = 0, - SPEAR1310_DMA_MASTER_UART3 = 0, - SPEAR1310_DMA_MASTER_UART4 = 0, - SPEAR1310_DMA_MASTER_UART5 = 0, - SPEAR1310_DMA_MASTER_I2C1 = 0, - SPEAR1310_DMA_MASTER_I2C2 = 0, - SPEAR1310_DMA_MASTER_I2C3 = 0, - SPEAR1310_DMA_MASTER_I2C4 = 0, - SPEAR1310_DMA_MASTER_I2C5 = 0, - SPEAR1310_DMA_MASTER_I2C6 = 0, - SPEAR1310_DMA_MASTER_I2C7 = 0, - SPEAR1310_DMA_MASTER_SSP1 = 0, -#endif - -#ifdef CONFIG_MACH_SPEAR1340 - /* Accessible from only one master */ - SPEAR1340_DMA_MASTER_I2S_PLAY = 1, - SPEAR1340_DMA_MASTER_I2S_REC = 1, - SPEAR1340_DMA_MASTER_I2C1 = 1, - SPEAR1340_DMA_MASTER_UART1 = 1, - - /* following are accessible from both master 0 & 1 */ - SPEAR1340_DMA_MASTER_SPDIF = 0, - SPEAR1340_DMA_MASTER_CAM = 1, - SPEAR1340_DMA_MASTER_VIDEO_IN = 0, - SPEAR1340_DMA_MASTER_MALI = 0, -#endif -}; - -enum request_id { - DMA_REQ_ADC = 0, - DMA_REQ_SSP0_TX = 4, - DMA_REQ_SSP0_RX = 5, - DMA_REQ_UART0_TX = 6, - DMA_REQ_UART0_RX = 7, - DMA_REQ_I2C0_TX = 8, - DMA_REQ_I2C0_RX = 9, - -#ifdef CONFIG_MACH_SPEAR1310 - SPEAR1310_DMA_REQ_FROM_JPEG = 2, - SPEAR1310_DMA_REQ_TO_JPEG = 3, - SPEAR1310_DMA_REQ_I2S_TX = 10, - SPEAR1310_DMA_REQ_I2S_RX = 11, - - SPEAR1310_DMA_REQ_I2C1_RX = 0, - SPEAR1310_DMA_REQ_I2C1_TX = 1, - SPEAR1310_DMA_REQ_I2C2_RX = 2, - SPEAR1310_DMA_REQ_I2C2_TX = 3, - SPEAR1310_DMA_REQ_I2C3_RX = 4, - SPEAR1310_DMA_REQ_I2C3_TX = 5, - SPEAR1310_DMA_REQ_I2C4_RX = 6, - SPEAR1310_DMA_REQ_I2C4_TX = 7, - SPEAR1310_DMA_REQ_I2C5_RX = 8, - SPEAR1310_DMA_REQ_I2C5_TX = 9, - SPEAR1310_DMA_REQ_I2C6_RX = 10, - SPEAR1310_DMA_REQ_I2C6_TX = 11, - SPEAR1310_DMA_REQ_UART1_RX = 12, - SPEAR1310_DMA_REQ_UART1_TX = 13, - SPEAR1310_DMA_REQ_UART2_RX = 14, - SPEAR1310_DMA_REQ_UART2_TX = 15, - SPEAR1310_DMA_REQ_UART5_RX = 16, - SPEAR1310_DMA_REQ_UART5_TX = 17, - SPEAR1310_DMA_REQ_SSP1_RX = 18, - SPEAR1310_DMA_REQ_SSP1_TX = 19, - SPEAR1310_DMA_REQ_I2C7_RX = 20, - SPEAR1310_DMA_REQ_I2C7_TX = 21, - SPEAR1310_DMA_REQ_UART3_RX = 28, - SPEAR1310_DMA_REQ_UART3_TX = 29, - SPEAR1310_DMA_REQ_UART4_RX = 30, - SPEAR1310_DMA_REQ_UART4_TX = 31, -#endif - -#ifdef CONFIG_MACH_SPEAR1340 - SPEAR1340_DMA_REQ_SPDIF_TX = 2, - SPEAR1340_DMA_REQ_SPDIF_RX = 3, - SPEAR1340_DMA_REQ_I2S_TX = 10, - SPEAR1340_DMA_REQ_I2S_RX = 11, - SPEAR1340_DMA_REQ_UART1_TX = 12, - SPEAR1340_DMA_REQ_UART1_RX = 13, - SPEAR1340_DMA_REQ_I2C1_TX = 14, - SPEAR1340_DMA_REQ_I2C1_RX = 15, - SPEAR1340_DMA_REQ_CAM0_EVEN = 0, - SPEAR1340_DMA_REQ_CAM0_ODD = 1, - SPEAR1340_DMA_REQ_CAM1_EVEN = 2, - SPEAR1340_DMA_REQ_CAM1_ODD = 3, - SPEAR1340_DMA_REQ_CAM2_EVEN = 4, - SPEAR1340_DMA_REQ_CAM2_ODD = 5, - SPEAR1340_DMA_REQ_CAM3_EVEN = 6, - SPEAR1340_DMA_REQ_CAM3_ODD = 7, -#endif -}; - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 6dd20899717..3621599c38a 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -16,70 +16,12 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> #include <linux/clocksource.h> -#include <linux/dw_dmac.h> #include <linux/err.h> #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include "generic.h" #include <mach/spear.h> - -#include "spear13xx-dma.h" - -/* common dw_dma filter routine to be used by peripherals */ -bool dw_dma_filter(struct dma_chan *chan, void *slave) -{ - struct dw_dma_slave *dws = (struct dw_dma_slave *)slave; - - if (chan->device->dev == dws->dma_dev) { - chan->private = slave; - return true; - } else { - return false; - } -} - -/* ssp device registration */ -static struct dw_dma_slave ssp_dma_param[] = { - { - /* Tx */ - .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX), - .cfg_lo = 0, - .src_master = DMA_MASTER_MEMORY, - .dst_master = DMA_MASTER_SSP0, - }, { - /* Rx */ - .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX), - .cfg_lo = 0, - .src_master = DMA_MASTER_SSP0, - .dst_master = DMA_MASTER_MEMORY, - } -}; - -struct pl022_ssp_controller pl022_plat_data = { - .enable_dma = 1, - .dma_filter = dw_dma_filter, - .dma_rx_param = &ssp_dma_param[1], - .dma_tx_param = &ssp_dma_param[0], -}; - -/* CF device registration */ -struct dw_dma_slave cf_dma_priv = { - .cfg_hi = 0, - .cfg_lo = 0, - .src_master = 0, - .dst_master = 0, -}; - -/* dmac device registeration */ -struct dw_dma_platform_data dmac_plat_data = { - .nr_channels = 8, - .chan_allocation_order = CHAN_ALLOCATION_DESCENDING, - .chan_priority = CHAN_PRIORITY_DESCENDING, - .block_size = 4095U, - .nr_masters = 2, - .data_width = { 3, 3, 0, 0 }, -}; +#include "generic.h" void __init spear13xx_l2x0_init(void) { diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 25160aeaa3b..54bb80b012a 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -749,12 +749,25 @@ void versatile_restart(char mode, const char *cmd) /* Early initializations */ void __init versatile_init_early(void) { + u32 val; void __iomem *sys = __io_address(VERSATILE_SYS_BASE); osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000); + + /* + * set clock frequency: + * VERSATILE_REFCLK is 32KHz + * VERSATILE_TIMCLK is 1MHz + */ + val = readl(__io_address(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + __io_address(VERSATILE_SCTL_BASE)); } void __init versatile_init(void) @@ -785,19 +798,6 @@ void __init versatile_init(void) */ void __init versatile_timer_init(void) { - u32 val; - - /* - * set clock frequency: - * VERSATILE_REFCLK is 32KHz - * VERSATILE_TIMCLK is 1MHz - */ - val = readl(__io_address(VERSATILE_SCTL_BASE)); - writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, - __io_address(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 2558f2e957c..3621b000a0f 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -45,7 +45,6 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, - .init_time = versatile_timer_init, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, .restart = versatile_restart, diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9366f37902d..b6083bb1eb8 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -1,6 +1,7 @@ /* * Versatile Express V2M Motherboard Support */ +#include <linux/clocksource.h> #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/mmci.h> @@ -25,7 +26,6 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> -#include <asm/arch_timer.h> #include <asm/mach-types.h> #include <asm/sizes.h> #include <asm/mach/arch.h> @@ -63,9 +63,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) if (WARN_ON(!base || irq == NO_IRQ)) return; - writel(0, base + TIMER_1_BASE + TIMER_CTRL); - writel(0, base + TIMER_2_BASE + TIMER_CTRL); - sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1"); sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0"); } @@ -430,29 +427,11 @@ void __init v2m_dt_init_early(void) static void __init v2m_dt_timer_init(void) { - struct device_node *node = NULL; - of_clk_init(NULL); clocksource_of_init(); - do { - node = of_find_compatible_node(node, NULL, "arm,sp804"); - } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); - if (node) { - pr_info("Using SP804 '%s' as a clock & events source\n", - node->full_name); - WARN_ON(clk_register_clkdev(of_clk_get_by_name(node, - "timclken1"), "v2m-timer0", "sp804")); - WARN_ON(clk_register_clkdev(of_clk_get_by_name(node, - "timclken2"), "v2m-timer1", "sp804")); - v2m_sp804_init(of_iomap(node, 0), - irq_of_parse_and_map(node, 0)); - } - - arch_timer_of_register(); - if (arch_timer_sched_clock_init() != 0) - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c index 31666f6b437..adc0945255a 100644 --- a/arch/arm/mach-virt/virt.c +++ b/arch/arm/mach-virt/virt.c @@ -23,21 +23,13 @@ #include <linux/of_platform.h> #include <linux/smp.h> -#include <asm/arch_timer.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> static void __init virt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init virt_timer_init(void) -{ - WARN_ON(arch_timer_of_register() != 0); - WARN_ON(arch_timer_sched_clock_init() != 0); -} - static const char *virt_dt_match[] = { "linux,dummy-virt", NULL @@ -47,7 +39,6 @@ extern struct smp_operations virt_smp_ops; DT_MACHINE_START(VIRT, "Dummy Virtual Machine") .init_irq = irqchip_init, - .init_time = virt_timer_init, .init_machine = virt_init, .smp = smp_ops(virt_smp_ops), .dt_compat = virt_dt_match, diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h index 91e2a6a6fcd..bf6ab242f04 100644 --- a/arch/arm64/include/asm/arch_timer.h +++ b/arch/arm64/include/asm/arch_timer.h @@ -130,4 +130,9 @@ static inline u64 arch_counter_get_cntvct(void) return cval; } +static inline int arch_timer_arch_init(void) +{ + return 0; +} + #endif diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index b0ef18d14c3..a551f88ae2c 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -32,6 +32,7 @@ #include <linux/timer.h> #include <linux/irq.h> #include <linux/delay.h> +#include <linux/clocksource.h> #include <clocksource/arm_arch_timer.h> @@ -77,10 +78,11 @@ void __init time_init(void) { u32 arch_timer_rate; - if (arch_timer_init()) - panic("Unable to initialise architected timer.\n"); + clocksource_of_init(); arch_timer_rate = arch_timer_get_rate(); + if (!arch_timer_rate) + panic("Unable to initialise architected timer.\n"); /* Cache the sched_clock multiplier to save a divide in the hot path. */ sched_clock_mult = NSEC_PER_SEC / arch_timer_rate; diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 405022d302c..7638121cb5d 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -209,8 +209,6 @@ struct arasan_cf_dev { struct dma_chan *dma_chan; /* Mask for DMA transfers */ dma_cap_mask_t mask; - /* dma channel private data */ - void *dma_priv; /* DMA transfer work */ struct work_struct work; /* DMA delayed finish work */ @@ -308,6 +306,7 @@ static void cf_card_detect(struct arasan_cf_dev *acdev, bool hotplugged) static int cf_init(struct arasan_cf_dev *acdev) { struct arasan_cf_pdata *pdata = dev_get_platdata(acdev->host->dev); + unsigned int if_clk; unsigned long flags; int ret = 0; @@ -325,8 +324,12 @@ static int cf_init(struct arasan_cf_dev *acdev) spin_lock_irqsave(&acdev->host->lock, flags); /* configure CF interface clock */ - writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk : - CF_IF_CLK_166M, acdev->vbase + CLK_CFG); + /* TODO: read from device tree */ + if_clk = CF_IF_CLK_166M; + if (pdata && pdata->cf_if_clk <= CF_IF_CLK_200M) + if_clk = pdata->cf_if_clk; + + writel(if_clk, acdev->vbase + CLK_CFG); writel(TRUE_IDE_MODE | CFHOST_ENB, acdev->vbase + OP_MODE); cf_interrupt_enable(acdev, CARD_DETECT_IRQ, 1); @@ -357,12 +360,6 @@ static void dma_callback(void *dev) complete(&acdev->dma_completion); } -static bool filter(struct dma_chan *chan, void *slave) -{ - chan->private = slave; - return true; -} - static inline void dma_complete(struct arasan_cf_dev *acdev) { struct ata_queued_cmd *qc = acdev->qc; @@ -530,8 +527,7 @@ static void data_xfer(struct work_struct *work) /* request dma channels */ /* dma_request_channel may sleep, so calling from process context */ - acdev->dma_chan = dma_request_channel(acdev->mask, filter, - acdev->dma_priv); + acdev->dma_chan = dma_request_slave_channel(acdev->host->dev, "data"); if (!acdev->dma_chan) { dev_err(acdev->host->dev, "Unable to get dma_chan\n"); goto chan_request_fail; @@ -798,6 +794,7 @@ static int arasan_cf_probe(struct platform_device *pdev) struct ata_host *host; struct ata_port *ap; struct resource *res; + u32 quirk; irq_handler_t irq_handler = NULL; int ret = 0; @@ -817,12 +814,17 @@ static int arasan_cf_probe(struct platform_device *pdev) return -ENOMEM; } + if (pdata) + quirk = pdata->quirk; + else + quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */ + /* if irq is 0, support only PIO */ acdev->irq = platform_get_irq(pdev, 0); if (acdev->irq) irq_handler = arasan_cf_interrupt; else - pdata->quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA; + quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA; acdev->pbase = res->start; acdev->vbase = devm_ioremap_nocache(&pdev->dev, res->start, @@ -859,17 +861,16 @@ static int arasan_cf_probe(struct platform_device *pdev) INIT_WORK(&acdev->work, data_xfer); INIT_DELAYED_WORK(&acdev->dwork, delayed_finish); dma_cap_set(DMA_MEMCPY, acdev->mask); - acdev->dma_priv = pdata->dma_priv; /* Handle platform specific quirks */ - if (pdata->quirk) { - if (pdata->quirk & CF_BROKEN_PIO) { + if (quirk) { + if (quirk & CF_BROKEN_PIO) { ap->ops->set_piomode = NULL; ap->pio_mask = 0; } - if (pdata->quirk & CF_BROKEN_MWDMA) + if (quirk & CF_BROKEN_MWDMA) ap->mwdma_mask = 0; - if (pdata->quirk & CF_BROKEN_UDMA) + if (quirk & CF_BROKEN_UDMA) ap->udma_mask = 0; } ap->flags |= ATA_FLAG_PIO_POLLING | ATA_FLAG_NO_ATAPI; diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 7bc6e51757e..c20de4a85cb 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -65,6 +65,7 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK config ARM_ARCH_TIMER bool + select CLKSRC_OF if OF config CLKSRC_METAG_GENERIC def_bool y if METAG diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index d7ad425ab9b..a2b25418978 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -248,14 +248,16 @@ static void __cpuinit arch_timer_stop(struct clock_event_device *clk) static int __cpuinit arch_timer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { - struct clock_event_device *evt = this_cpu_ptr(arch_timer_evt); - + /* + * Grab cpu pointer in each case to avoid spurious + * preemptible warnings + */ switch (action & ~CPU_TASKS_FROZEN) { case CPU_STARTING: - arch_timer_setup(evt); + arch_timer_setup(this_cpu_ptr(arch_timer_evt)); break; case CPU_DYING: - arch_timer_stop(evt); + arch_timer_stop(this_cpu_ptr(arch_timer_evt)); break; } @@ -337,22 +339,14 @@ out: return err; } -static const struct of_device_id arch_timer_of_match[] __initconst = { - { .compatible = "arm,armv7-timer", }, - { .compatible = "arm,armv8-timer", }, - {}, -}; - -int __init arch_timer_init(void) +static void __init arch_timer_init(struct device_node *np) { - struct device_node *np; u32 freq; int i; - np = of_find_matching_node(NULL, arch_timer_of_match); - if (!np) { - pr_err("arch_timer: can't find DT node\n"); - return -ENODEV; + if (arch_timer_get_rate()) { + pr_warn("arch_timer: multiple nodes in dt, skipping\n"); + return; } /* Try to determine the frequency from the device tree or CNTFRQ */ @@ -378,7 +372,7 @@ int __init arch_timer_init(void) if (!arch_timer_ppi[PHYS_SECURE_PPI] || !arch_timer_ppi[PHYS_NONSECURE_PPI]) { pr_warn("arch_timer: No interrupt available, giving up\n"); - return -EINVAL; + return; } } @@ -387,5 +381,8 @@ int __init arch_timer_init(void) else arch_timer_read_counter = arch_counter_get_cntpct; - return arch_timer_register(); + arch_timer_register(); + arch_timer_arch_init(); } +CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init); +CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init); diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 661026834b2..13a9e4923a0 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -24,7 +24,6 @@ #include <linux/of_address.h> #include <linux/clocksource.h> -#include <asm/arch_timer.h> #include <asm/localtimer.h> #include <plat/cpu.h> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index c28fcccf4a0..cda4cb5f732 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_MVEBU) += irq-armada-370-xp.o obj-$(CONFIG_ARCH_MXS) += irq-mxs.o obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_METAG) += irq-metag-ext.o diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 830139a3e2b..bb328a36612 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -25,7 +25,9 @@ #include <asm/mach/arch.h> #include <asm/exception.h> #include <asm/smp_plat.h> -#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/irq.h> + +#include "irqchip.h" /* Interrupt Controller Registers Map */ #define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48) @@ -46,7 +48,9 @@ #define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5) -#define ACTIVE_DOORBELLS (8) +#define IPI_DOORBELL_START (0) +#define IPI_DOORBELL_END (8) +#define IPI_DOORBELL_MASK 0xFF static DEFINE_RAW_SPINLOCK(irq_controller_lock); @@ -184,7 +188,7 @@ void armada_xp_mpic_smp_cpu_init(void) writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); /* Enable first 8 IPIs */ - writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base + + writel(IPI_DOORBELL_MASK, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS); /* Unmask IPI interrupt */ @@ -197,46 +201,8 @@ static struct irq_domain_ops armada_370_xp_mpic_irq_ops = { .xlate = irq_domain_xlate_onecell, }; -static int __init armada_370_xp_mpic_of_init(struct device_node *node, - struct device_node *parent) -{ - u32 control; - - main_int_base = of_iomap(node, 0); - per_cpu_int_base = of_iomap(node, 1); - - BUG_ON(!main_int_base); - BUG_ON(!per_cpu_int_base); - - control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); - - armada_370_xp_mpic_domain = - irq_domain_add_linear(node, (control >> 2) & 0x3ff, - &armada_370_xp_mpic_irq_ops, NULL); - - if (!armada_370_xp_mpic_domain) - panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); - - irq_set_default_host(armada_370_xp_mpic_domain); - -#ifdef CONFIG_SMP - armada_xp_mpic_smp_cpu_init(); - - /* - * Set the default affinity from all CPUs to the boot cpu. - * This is required since the MPIC doesn't limit several CPUs - * from acknowledging the same interrupt. - */ - cpumask_clear(irq_default_affinity); - cpumask_set_cpu(smp_processor_id(), irq_default_affinity); - -#endif - - return 0; -} - -asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs - *regs) +static asmlinkage void __exception_irq_entry +armada_370_xp_handle_irq(struct pt_regs *regs) { u32 irqstat, irqnr; @@ -261,13 +227,14 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs ipimask = readl_relaxed(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) - & 0xFF; + & IPI_DOORBELL_MASK; - writel(0x0, per_cpu_int_base + + writel(~IPI_DOORBELL_MASK, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); /* Handle all pending doorbells */ - for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) { + for (ipinr = IPI_DOORBELL_START; + ipinr < IPI_DOORBELL_END; ipinr++) { if (ipimask & (0x1 << ipinr)) handle_IPI(ipinr, regs); } @@ -278,15 +245,44 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs } while (1); } -static const struct of_device_id mpic_of_match[] __initconst = { - {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init}, - {}, -}; - -void __init armada_370_xp_init_irq(void) +static int __init armada_370_xp_mpic_of_init(struct device_node *node, + struct device_node *parent) { - of_irq_init(mpic_of_match); -#ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); + u32 control; + + main_int_base = of_iomap(node, 0); + per_cpu_int_base = of_iomap(node, 1); + + BUG_ON(!main_int_base); + BUG_ON(!per_cpu_int_base); + + control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); + + armada_370_xp_mpic_domain = + irq_domain_add_linear(node, (control >> 2) & 0x3ff, + &armada_370_xp_mpic_irq_ops, NULL); + + if (!armada_370_xp_mpic_domain) + panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); + + irq_set_default_host(armada_370_xp_mpic_domain); + +#ifdef CONFIG_SMP + armada_xp_mpic_smp_cpu_init(); + + /* + * Set the default affinity from all CPUs to the boot cpu. + * This is required since the MPIC doesn't limit several CPUs + * from acknowledging the same interrupt. + */ + cpumask_clear(irq_default_affinity); + cpumask_set_cpu(smp_processor_id(), irq_default_affinity); + #endif + + set_handle_irq(armada_370_xp_handle_irq); + + return 0; } + +IRQCHIP_DECLARE(armada_370_xp_mpic, "marvell,mpic", armada_370_xp_mpic_of_init); diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index b0fe393c882..371cc66f1a0 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1139,6 +1139,35 @@ err_no_rxchan: return -ENODEV; } +static int pl022_dma_autoprobe(struct pl022 *pl022) +{ + struct device *dev = &pl022->adev->dev; + + /* automatically configure DMA channels from platform, normally using DT */ + pl022->dma_rx_channel = dma_request_slave_channel(dev, "rx"); + if (!pl022->dma_rx_channel) + goto err_no_rxchan; + + pl022->dma_tx_channel = dma_request_slave_channel(dev, "tx"); + if (!pl022->dma_tx_channel) + goto err_no_txchan; + + pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!pl022->dummypage) + goto err_no_dummypage; + + return 0; + +err_no_dummypage: + dma_release_channel(pl022->dma_tx_channel); + pl022->dma_tx_channel = NULL; +err_no_txchan: + dma_release_channel(pl022->dma_rx_channel); + pl022->dma_rx_channel = NULL; +err_no_rxchan: + return -ENODEV; +} + static void terminate_dma(struct pl022 *pl022) { struct dma_chan *rxchan = pl022->dma_rx_channel; @@ -1167,6 +1196,11 @@ static inline int configure_dma(struct pl022 *pl022) return -ENODEV; } +static inline int pl022_dma_autoprobe(struct pl022 *pl022) +{ + return 0; +} + static inline int pl022_dma_probe(struct pl022 *pl022) { return 0; @@ -2226,8 +2260,13 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) goto err_no_irq; } - /* Get DMA channels */ - if (platform_info->enable_dma) { + /* Get DMA channels, try autoconfiguration first */ + status = pl022_dma_autoprobe(pl022); + + /* If that failed, use channels from platform_info */ + if (status == 0) + platform_info->enable_dma = 1; + else if (platform_info->enable_dma) { status = pl022_dma_probe(pl022); if (status != 0) platform_info->enable_dma = 0; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index b2e9e177a35..8ab70a62091 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -267,7 +267,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, } } -static void pl011_dma_probe_initcall(struct uart_amba_port *uap) +static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap) { /* DMA is the sole user of the platform data right now */ struct amba_pl011_data *plat = uap->port.dev->platform_data; @@ -281,20 +281,25 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_chan *chan; dma_cap_mask_t mask; - /* We need platform data */ - if (!plat || !plat->dma_filter) { - dev_info(uap->port.dev, "no DMA platform data\n"); - return; - } + chan = dma_request_slave_channel(dev, "tx"); - /* Try to acquire a generic DMA engine slave TX channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); if (!chan) { - dev_err(uap->port.dev, "no TX DMA channel!\n"); - return; + /* We need platform data */ + if (!plat || !plat->dma_filter) { + dev_info(uap->port.dev, "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave TX channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_channel(mask, plat->dma_filter, + plat->dma_tx_param); + if (!chan) { + dev_err(uap->port.dev, "no TX DMA channel!\n"); + return; + } } dmaengine_slave_config(chan, &tx_conf); @@ -304,7 +309,18 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) dma_chan_name(uap->dmatx.chan)); /* Optionally make use of an RX channel as well */ - if (plat->dma_rx_param) { + chan = dma_request_slave_channel(dev, "rx"); + + if (!chan && plat->dma_rx_param) { + chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); + + if (!chan) { + dev_err(uap->port.dev, "no RX DMA channel!\n"); + return; + } + } + + if (chan) { struct dma_slave_config rx_conf = { .src_addr = uap->port.mapbase + UART01x_DR, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, @@ -313,12 +329,6 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) .device_fc = false, }; - chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); - if (!chan) { - dev_err(uap->port.dev, "no RX DMA channel!\n"); - return; - } - dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; @@ -360,6 +370,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_uap { struct list_head node; struct uart_amba_port *uap; + struct device *dev; }; static LIST_HEAD(pl011_dma_uarts); @@ -370,7 +381,7 @@ static int __init pl011_dma_initcall(void) list_for_each_safe(node, tmp, &pl011_dma_uarts) { struct dma_uap *dmau = list_entry(node, struct dma_uap, node); - pl011_dma_probe_initcall(dmau->uap); + pl011_dma_probe_initcall(dmau->dev, dmau->uap); list_del(node); kfree(dmau); } @@ -379,18 +390,19 @@ static int __init pl011_dma_initcall(void) device_initcall(pl011_dma_initcall); -static void pl011_dma_probe(struct uart_amba_port *uap) +static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap) { struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL); if (dmau) { dmau->uap = uap; + dmau->dev = dev; list_add_tail(&dmau->node, &pl011_dma_uarts); } } #else -static void pl011_dma_probe(struct uart_amba_port *uap) +static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap) { - pl011_dma_probe_initcall(uap); + pl011_dma_probe_initcall(dev, uap); } #endif @@ -1096,7 +1108,7 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) #else /* Blank functions if the DMA engine is not available */ -static inline void pl011_dma_probe(struct uart_amba_port *uap) +static inline void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap) { } @@ -2155,7 +2167,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.ops = &amba_pl011_pops; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = i; - pl011_dma_probe(uap); + pl011_dma_probe(&dev->dev, uap); /* Ensure interrupts from this UART are masked and cleared */ writew(0, uap->port.membase + UART011_IMSC); diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index 2603267b1a2..e6c9c4cc9b2 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -31,18 +31,12 @@ #ifdef CONFIG_ARM_ARCH_TIMER -extern int arch_timer_init(void); extern u32 arch_timer_get_rate(void); extern u64 (*arch_timer_read_counter)(void); extern struct timecounter *arch_timer_get_timecounter(void); #else -static inline int arch_timer_init(void) -{ - return -ENXIO; -} - static inline u32 arch_timer_get_rate(void) { return 0; diff --git a/include/linux/of.h b/include/linux/of.h index 1b671c3809b..1fd08ca2310 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -387,6 +387,11 @@ static inline int of_device_is_compatible(const struct device_node *device, return 0; } +static inline int of_device_is_available(const struct device_node *device) +{ + return 0; +} + static inline struct property *of_find_property(const struct device_node *np, const char *name, int *lenp) diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h index a7b4fc386e6..3cc21c9cc1e 100644 --- a/include/linux/pata_arasan_cf_data.h +++ b/include/linux/pata_arasan_cf_data.h @@ -37,8 +37,6 @@ struct arasan_cf_pdata { #define CF_BROKEN_PIO (1) #define CF_BROKEN_MWDMA (1 << 1) #define CF_BROKEN_UDMA (1 << 2) - /* This is platform specific data for the DMA controller */ - void *dma_priv; }; static inline void |