Merge tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup

From Shawn Guo <shawn.guo@linaro.org>:

The mxs cleanup for 3.10:

* Clean up timer code and move it into drivers/clocksource
* Clean up icoll code and move it into drivers/irqchip
* Clean up clock code to not include <mach/*> headers
* Clean up rtc-stmp3xxx, mxs-lradc and mxs-saif to not include <mach/*>
  headers
* Clean up mach-mxs code to get it prepared for multiplatform support

* tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (26 commits)
  clocksource: mxs_timer: Add semicolon at end of line
  ARM: mxs: remove unused headers
  ARM: mxs: merge imx23 and imx28 into one machine_desc
  ARM: mxs: remove common.h
  ARM: mxs: move mxs_get_ocotp() into mach-mxs.c
  ARM: mxs: remove mm.c
  ARM: mxs: use debug_ll_io_init for low-level debug
  ARM: mxs: get ocotp base address from device tree
  ARM: mxs: remove system.c
  ARM: mxs: get reset address from device tree
  ARM: mxs: remove empty hardware.h
  ASoC: mxs-saif: remove mach header inclusion
  iio: mxs-lradc: remove unneeded mach header inclusion
  rtc: stmp3xxx: use stmp_reset_block() instead
  clk: mxs: remove the use of mach level IO accessor
  clk: mxs: get base address from device tree
  ARM: mxs: remove unneeded mach-types.h inclusion
  ARM: mxs: move icoll driver into drivers/irqchip
  ARM: mxs: call stmp_reset_block() in icoll
  ARM: mxs: get icoll base address from device tree
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 475 insertions, 45 deletions

diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index b5c06f9766f..f6a74872f14 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -15,12 +15,15 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx23.h>
+#include <linux/of_address.h>
 #include "clk.h"
 
-#define DIGCTRL			MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-#define CLKCTRL			MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+static void __iomem *digctrl;
+
+#define CLKCTRL clkctrl
+#define DIGCTRL digctrl
+
 #define PLLCTRL0		(CLKCTRL + 0x0000)
 #define CPU			(CLKCTRL + 0x0020)
 #define HBUS			(CLKCTRL + 0x0030)
@@ -48,10 +51,10 @@ static void __init clk_misc_init(void)
 	u32 val;
 
 	/* Gate off cpu clock in WFI for power saving */
-	__mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+	writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
 
 	/* Clear BYPASS for SAIF */
-	__mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ);
+	writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR);
 
 	/* SAIF has to use frac div for functional operation */
 	val = readl_relaxed(SAIF);
@@ -62,14 +65,14 @@ static void __init clk_misc_init(void)
 	 * Source ssp clock from ref_io than ref_xtal,
 	 * as ref_xtal only provides 24 MHz as maximum.
 	 */
-	__mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ);
+	writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR);
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
 	 * so set frac to get a 288 MHz ref_io.
 	 */
-	__mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC);
-	__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
+	writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR);
+	writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET);
 }
 
 static const char *sel_pll[]  __initconst = { "pll", "ref_xtal", };
@@ -101,6 +104,14 @@ int __init mx23_clocks_init(void)
 	struct device_node *np;
 	u32 i;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+	digctrl = of_iomap(np, 0);
+	WARN_ON(!digctrl);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+	clkctrl = of_iomap(np, 0);
+	WARN_ON(!clkctrl);
+
 	clk_misc_init();
 
 	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
@@ -153,19 +164,12 @@ int __init mx23_clocks_init(void)
 			return PTR_ERR(clks[i]);
 		}
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
-	if (np) {
-		clk_data.clks = clks;
-		clk_data.clk_num = ARRAY_SIZE(clks);
-		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-	}
-
-	clk_register_clkdev(clks[clk32k], NULL, "timrot");
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	mxs_timer_init();
-
 	return 0;
 }
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 76ce6c6d111..d0e5eed146d 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -15,11 +15,12 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx28.h>
+#include <linux/of_address.h>
 #include "clk.h"
 
-#define CLKCTRL			MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+#define CLKCTRL clkctrl
+
 #define PLL0CTRL0		(CLKCTRL + 0x0000)
 #define PLL1CTRL0		(CLKCTRL + 0x0020)
 #define PLL2CTRL0		(CLKCTRL + 0x0040)
@@ -53,7 +54,8 @@
 #define BP_FRAC0_IO1FRAC	16
 #define BP_FRAC0_IO0FRAC	24
 
-#define DIGCTRL			MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+static void __iomem *digctrl;
+#define DIGCTRL digctrl
 #define BP_SAIF_CLKMUX		10
 
 /*
@@ -72,8 +74,8 @@ int mxs_saif_clkmux_select(unsigned int clkmux)
 	if (clkmux > 0x3)
 		return -EINVAL;
 
-	__mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
-	__mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+	writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR);
+	writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET);
 
 	return 0;
 }
@@ -83,13 +85,13 @@ static void __init clk_misc_init(void)
 	u32 val;
 
 	/* Gate off cpu clock in WFI for power saving */
-	__mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+	writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
 
 	/* 0 is a bad default value for a divider */
-	__mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+	writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET);
 
 	/* Clear BYPASS for SAIF */
-	__mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+	writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR);
 
 	/* SAIF has to use frac div for functional operation */
 	val = readl_relaxed(SAIF0);
@@ -109,7 +111,7 @@ static void __init clk_misc_init(void)
 	 * Source ssp clock from ref_io than ref_xtal,
 	 * as ref_xtal only provides 24 MHz as maximum.
 	 */
-	__mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+	writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR);
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
@@ -156,6 +158,14 @@ int __init mx28_clocks_init(void)
 	struct device_node *np;
 	u32 i;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+	digctrl = of_iomap(np, 0);
+	WARN_ON(!digctrl);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+	clkctrl = of_iomap(np, 0);
+	WARN_ON(!clkctrl);
+
 	clk_misc_init();
 
 	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
@@ -231,20 +241,14 @@ int __init mx28_clocks_init(void)
 			return PTR_ERR(clks[i]);
 		}
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
-	if (np) {
-		clk_data.clks = clks;
-		clk_data.clk_num = ARRAY_SIZE(clks);
-		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-	}
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	clk_register_clkdev(clks[xbus], NULL, "timrot");
 	clk_register_clkdev(clks[enet_out], NULL, "enet_out");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	mxs_timer_init();
-
 	return 0;
 }
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4d8283aec5b..89c5adc498b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
+obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
new file mode 100644
index 00000000000..02af4204af8
--- /dev/null
+++ b/drivers/clocksource/mxs_timer.c
@@ -0,0 +1,304 @@
+/*
+ *  Copyright (C) 2000-2001 Deep Blue Solutions
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *  Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+/*
+ * There are 2 versions of the timrot on Freescale MXS-based SoCs.
+ * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
+ * extends the counter to 32 bits.
+ *
+ * The implementation uses two timers, one for clock_event and
+ * another for clocksource. MX28 uses timrot 0 and 1, while MX23
+ * uses 0 and 2.
+ */
+
+#define MX23_TIMROT_VERSION_OFFSET	0x0a0
+#define MX28_TIMROT_VERSION_OFFSET	0x120
+#define BP_TIMROT_MAJOR_VERSION		24
+#define BV_TIMROT_VERSION_1		0x01
+#define BV_TIMROT_VERSION_2		0x02
+#define timrot_is_v1()	(timrot_major_version == BV_TIMROT_VERSION_1)
+
+/*
+ * There are 4 registers for each timrotv2 instance, and 2 registers
+ * for each timrotv1. So address step 0x40 in macros below strides
+ * one instance of timrotv2 while two instances of timrotv1.
+ *
+ * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
+ * on MX28 while timrot2 on MX23.
+ */
+/* common between v1 and v2 */
+#define HW_TIMROT_ROTCTRL		0x00
+#define HW_TIMROT_TIMCTRLn(n)		(0x20 + (n) * 0x40)
+/* v1 only */
+#define HW_TIMROT_TIMCOUNTn(n)		(0x30 + (n) * 0x40)
+/* v2 only */
+#define HW_TIMROT_RUNNING_COUNTn(n)	(0x30 + (n) * 0x40)
+#define HW_TIMROT_FIXED_COUNTn(n)	(0x40 + (n) * 0x40)
+
+#define BM_TIMROT_TIMCTRLn_RELOAD	(1 << 6)
+#define BM_TIMROT_TIMCTRLn_UPDATE	(1 << 7)
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	(1 << 14)
+#define BM_TIMROT_TIMCTRLn_IRQ		(1 << 15)
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL		0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL		0xb
+#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS	0xf
+
+static struct clock_event_device mxs_clockevent_device;
+static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *mxs_timrot_base;
+static u32 timrot_major_version;
+
+static inline void timrot_irq_disable(void)
+{
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static inline void timrot_irq_enable(void)
+{
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
+}
+
+static void timrot_irq_acknowledge(void)
+{
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static cycle_t timrotv1_get_cycles(struct clocksource *cs)
+{
+	return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
+			& 0xffff0000) >> 16);
+}
+
+static int timrotv1_set_next_event(unsigned long evt,
+					struct clock_event_device *dev)
+{
+	/* timrot decrements the count */
+	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
+
+	return 0;
+}
+
+static int timrotv2_set_next_event(unsigned long evt,
+					struct clock_event_device *dev)
+{
+	/* timrot decrements the count */
+	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
+
+	return 0;
+}
+
+static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	timrot_irq_acknowledge();
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mxs_timer_irq = {
+	.name		= "MXS Timer Tick",
+	.dev_id		= &mxs_clockevent_device,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= mxs_timer_interrupt,
+};
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] const = {
+	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
+	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxs_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	/* Disable interrupt in timer module */
+	timrot_irq_disable();
+
+	if (mode != mxs_clockevent_mode) {
+		/* Set event time into the furthest future */
+		if (timrot_is_v1())
+			__raw_writel(0xffff,
+				mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+		else
+			__raw_writel(0xffffffff,
+				mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+		/* Clear pending interrupt */
+		timrot_irq_acknowledge();
+	}
+
+#ifdef DEBUG
+	pr_info("%s: changing mode from %s to %s\n", __func__,
+		clock_event_mode_label[mxs_clockevent_mode],
+		clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+	/* Remember timer mode */
+	mxs_clockevent_mode = mode;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pr_err("%s: Periodic mode is not implemented\n", __func__);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		timrot_irq_enable();
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
+}
+
+static struct clock_event_device mxs_clockevent_device = {
+	.name		= "mxs_timrot",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= mxs_set_mode,
+	.set_next_event	= timrotv2_set_next_event,
+	.rating		= 200,
+};
+
+static int __init mxs_clockevent_init(struct clk *timer_clk)
+{
+	if (timrot_is_v1())
+		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
+	mxs_clockevent_device.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&mxs_clockevent_device,
+					clk_get_rate(timer_clk),
+					timrot_is_v1() ? 0xf : 0x2,
+					timrot_is_v1() ? 0xfffe : 0xfffffffe);
+
+	return 0;
+}
+
+static struct clocksource clocksource_mxs = {
+	.name		= "mxs_timer",
+	.rating		= 200,
+	.read		= timrotv1_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u32 notrace mxs_read_sched_clock_v2(void)
+{
+	return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
+static int __init mxs_clocksource_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	if (timrot_is_v1())
+		clocksource_register_hz(&clocksource_mxs, c);
+	else {
+		clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
+			"mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
+		setup_sched_clock(mxs_read_sched_clock_v2, 32, c);
+	}
+
+	return 0;
+}
+
+static void __init mxs_timer_init(struct device_node *np)
+{
+	struct clk *timer_clk;
+	int irq;
+
+	mxs_timrot_base = of_iomap(np, 0);
+	WARN_ON(!mxs_timrot_base);
+
+	timer_clk = of_clk_get(np, 0);
+	if (IS_ERR(timer_clk)) {
+		pr_err("%s: failed to get clk\n", __func__);
+		return;
+	}
+
+	clk_prepare_enable(timer_clk);
+
+	/*
+	 * Initialize timers to a known state
+	 */
+	stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+
+	/* get timrot version */
+	timrot_major_version = __raw_readl(mxs_timrot_base +
+			(of_device_is_compatible(np, "fsl,imx23-timrot") ?
+						MX23_TIMROT_VERSION_OFFSET :
+						MX28_TIMROT_VERSION_OFFSET));
+	timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
+
+	/* one for clock_event */
+	__raw_writel((timrot_is_v1() ?
+			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+			BM_TIMROT_TIMCTRLn_UPDATE |
+			BM_TIMROT_TIMCTRLn_IRQ_EN,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+
+	/* another for clocksource */
+	__raw_writel((timrot_is_v1() ?
+			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+			BM_TIMROT_TIMCTRLn_RELOAD,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
+
+	/* set clocksource timer fixed count to the maximum */
+	if (timrot_is_v1())
+		__raw_writel(0xffff,
+			mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+	else
+		__raw_writel(0xffffffff,
+			mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+	/* init and register the timer to the framework */
+	mxs_clocksource_init(timer_clk);
+	mxs_clockevent_init(timer_clk);
+
+	/* Make irqs happen */
+	irq = irq_of_parse_and_map(np, 0);
+	setup_irq(irq, &mxs_timer_irq);
+}
+CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 98e3b87bdf1..9d8f4f1c6e3 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
 
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
+obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
 obj-$(CONFIG_METAG)			+= irq-metag-ext.o
 obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)	+= irq-metag.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi.o
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
new file mode 100644
index 00000000000..29889bbdcc6
--- /dev/null
+++ b/drivers/irqchip/irq-mxs.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define HW_ICOLL_VECTOR				0x0000
+#define HW_ICOLL_LEVELACK			0x0010
+#define HW_ICOLL_CTRL				0x0020
+#define HW_ICOLL_STAT_OFFSET			0x0070
+#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
+#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
+#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
+
+#define ICOLL_NUM_IRQS		128
+
+static void __iomem *icoll_base;
+static struct irq_domain *icoll_domain;
+
+static void icoll_ack_irq(struct irq_data *d)
+{
+	/*
+	 * The Interrupt Collector is able to prioritize irqs.
+	 * Currently only level 0 is used. So acking can use
+	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
+	 */
+	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+			icoll_base + HW_ICOLL_LEVELACK);
+}
+
+static void icoll_mask_irq(struct irq_data *d)
+{
+	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+}
+
+static void icoll_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+}
+
+static struct irq_chip mxs_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = icoll_mask_irq,
+	.irq_unmask = icoll_unmask_irq,
+};
+
+asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
+{
+	u32 irqnr;
+
+	do {
+		irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
+		if (irqnr != 0x7f) {
+			__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+			irqnr = irq_find_mapping(icoll_domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		break;
+	} while (1);
+}
+
+static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops icoll_irq_domain_ops = {
+	.map = icoll_irq_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	icoll_base = of_iomap(np, 0);
+	WARN_ON(!icoll_base);
+
+	/*
+	 * Interrupt Collector reset, which initializes the priority
+	 * for each irq to level 0.
+	 */
+	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+
+	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
+					     &icoll_irq_domain_ops, NULL);
+	WARN_ON(!icoll_domain);
+}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 98f0d3c3073..67d26128bc8 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -30,8 +30,6 @@
 #include <linux/stmp_device.h>
 #include <linux/stmp3xxx_rtc_wdt.h>
 
-#include <mach/common.h>
-
 #define STMP3XXX_RTC_CTRL			0x0
 #define STMP3XXX_RTC_CTRL_SET			0x4
 #define STMP3XXX_RTC_CTRL_CLR			0x8
@@ -271,7 +269,7 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rtc_data);
 
-	mxs_reset_block(rtc_data->io);
+	stmp_reset_block(rtc_data->io);
 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
@@ -319,7 +317,7 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
 {
 	struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(dev);
 
-	mxs_reset_block(rtc_data->io);
+	stmp_reset_block(rtc_data->io);
 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index 55a459b6190..0eb5b4d759e 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -36,9 +36,6 @@
 #include <linux/delay.h>
 #include <linux/input.h>
 
-#include <mach/mxs.h>
-#include <mach/common.h>
-
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/trigger.h>