Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-androidlsk-android-14.01

10 files changed, 45 insertions, 18 deletions

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 16e674af4d5..7ce38344e48 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1193,12 +1193,18 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
 	enum pipe pipe;
 	struct intel_crtc *intel_crtc;
 
+	dev_priv->ddi_plls.spll_refcount = 0;
+	dev_priv->ddi_plls.wrpll1_refcount = 0;
+	dev_priv->ddi_plls.wrpll2_refcount = 0;
+
 	for_each_pipe(pipe) {
 		intel_crtc =
 			to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
 
-		if (!intel_crtc->active)
+		if (!intel_crtc->active) {
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
 			continue;
+		}
 
 		intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
 								 pipe);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 15358add4f7..54ae96f7bec 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9456,9 +9456,9 @@ void intel_modeset_gem_init(struct drm_device *dev)
 
 	intel_setup_overlay(dev);
 
-	drm_modeset_lock_all(dev);
+	mutex_lock(&dev->mode_config.mutex);
 	intel_modeset_setup_hw_state(dev, false);
-	drm_modeset_unlock_all(dev);
+	mutex_unlock(&dev->mode_config.mutex);
 }
 
 void intel_modeset_cleanup(struct drm_device *dev)
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 658ce3a8717..0cf25101b3c 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
 
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
 #define NUM_REAL_CORES		32	/* Number of Real cores per cpu */
-#define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
+#define CORETEMP_NAME_LENGTH	19	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
 #define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)
 #define MAX_CORE_DATA		(NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 2290b95009d..a2dda416c9c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1118,6 +1118,7 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
 	rdev->raid_disk = -1;
 	clear_bit(Faulty, &rdev->flags);
 	clear_bit(In_sync, &rdev->flags);
+	clear_bit(Bitmap_sync, &rdev->flags);
 	clear_bit(WriteMostly, &rdev->flags);
 
 	if (mddev->raid_disks == 0) {
@@ -1196,6 +1197,8 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
 		 */
 		if (ev1 < mddev->bitmap->events_cleared)
 			return 0;
+		if (ev1 < mddev->events)
+			set_bit(Bitmap_sync, &rdev->flags);
 	} else {
 		if (ev1 < mddev->events)
 			/* just a hot-add of a new device, leave raid_disk at -1 */
@@ -1604,6 +1607,7 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 	rdev->raid_disk = -1;
 	clear_bit(Faulty, &rdev->flags);
 	clear_bit(In_sync, &rdev->flags);
+	clear_bit(Bitmap_sync, &rdev->flags);
 	clear_bit(WriteMostly, &rdev->flags);
 
 	if (mddev->raid_disks == 0) {
@@ -1686,6 +1690,8 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 		 */
 		if (ev1 < mddev->bitmap->events_cleared)
 			return 0;
+		if (ev1 < mddev->events)
+			set_bit(Bitmap_sync, &rdev->flags);
 	} else {
 		if (ev1 < mddev->events)
 			/* just a hot-add of a new device, leave raid_disk at -1 */
@@ -2829,6 +2835,7 @@ slot_store(struct md_rdev *rdev, const char *buf, size_t len)
 		else
 			rdev->saved_raid_disk = -1;
 		clear_bit(In_sync, &rdev->flags);
+		clear_bit(Bitmap_sync, &rdev->flags);
 		err = rdev->mddev->pers->
 			hot_add_disk(rdev->mddev, rdev);
 		if (err) {
@@ -5761,6 +5768,7 @@ static int add_new_disk(struct mddev * mddev, mdu_disk_info_t *info)
 			    info->raid_disk < mddev->raid_disks) {
 				rdev->raid_disk = info->raid_disk;
 				set_bit(In_sync, &rdev->flags);
+				clear_bit(Bitmap_sync, &rdev->flags);
 			} else
 				rdev->raid_disk = -1;
 		} else
@@ -7694,7 +7702,8 @@ static int remove_and_add_spares(struct mddev *mddev,
 		if (test_bit(Faulty, &rdev->flags))
 			continue;
 		if (mddev->ro &&
-		    rdev->saved_raid_disk < 0)
+		    ! (rdev->saved_raid_disk >= 0 &&
+		       !test_bit(Bitmap_sync, &rdev->flags)))
 			continue;
 
 		rdev->recovery_offset = 0;
@@ -7775,9 +7784,12 @@ void md_check_recovery(struct mddev *mddev)
 			 * As we only add devices that are already in-sync,
 			 * we can activate the spares immediately.
 			 */
-			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			remove_and_add_spares(mddev, NULL);
-			mddev->pers->spare_active(mddev);
+			/* There is no thread, but we need to call
+			 * ->spare_active and clear saved_raid_disk
+			 */
+			md_reap_sync_thread(mddev);
+			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			goto unlock;
 		}
 
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 653f992b687..ebe748e5741 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -129,6 +129,9 @@ struct md_rdev {
 enum flag_bits {
 	Faulty,			/* device is known to have a fault */
 	In_sync,		/* device is in_sync with rest of array */
+	Bitmap_sync,		/* ..actually, not quite In_sync.  Need a
+				 * bitmap-based recovery to get fully in sync
+				 */
 	Unmerged,		/* device is being added to array and should
 				 * be considerred for bvec_merge_fn but not
 				 * yet for actual IO
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 0add8682175..d2f8cd332b4 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1321,7 +1321,7 @@ read_again:
 			/* Could not read all from this device, so we will
 			 * need another r10_bio.
 			 */
-			sectors_handled = (r10_bio->sectors + max_sectors
+			sectors_handled = (r10_bio->sector + max_sectors
 					   - bio->bi_sector);
 			r10_bio->sectors = max_sectors;
 			spin_lock_irq(&conf->device_lock);
@@ -1329,7 +1329,7 @@ read_again:
 				bio->bi_phys_segments = 2;
 			else
 				bio->bi_phys_segments++;
-			spin_unlock(&conf->device_lock);
+			spin_unlock_irq(&conf->device_lock);
 			/* Cannot call generic_make_request directly
 			 * as that will be queued in __generic_make_request
 			 * and subsequent mempool_alloc might block
@@ -3198,10 +3198,6 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
 			if (j == conf->copies) {
 				/* Cannot recover, so abort the recovery or
 				 * record a bad block */
-				put_buf(r10_bio);
-				if (rb2)
-					atomic_dec(&rb2->remaining);
-				r10_bio = rb2;
 				if (any_working) {
 					/* problem is that there are bad blocks
 					 * on other device(s)
@@ -3233,6 +3229,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
 					mirror->recovery_disabled
 						= mddev->recovery_disabled;
 				}
+				put_buf(r10_bio);
+				if (rb2)
+					atomic_dec(&rb2->remaining);
+				r10_bio = rb2;
 				break;
 			}
 		}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 4bed5454b8d..51422999fd0 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3391,7 +3391,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			 */
 			set_bit(R5_Insync, &dev->flags);
 
-		if (rdev && test_bit(R5_WriteError, &dev->flags)) {
+		if (test_bit(R5_WriteError, &dev->flags)) {
 			/* This flag does not apply to '.replacement'
 			 * only to .rdev, so make sure to check that*/
 			struct md_rdev *rdev2 = rcu_dereference(
@@ -3404,7 +3404,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			} else
 				clear_bit(R5_WriteError, &dev->flags);
 		}
-		if (rdev && test_bit(R5_MadeGood, &dev->flags)) {
+		if (test_bit(R5_MadeGood, &dev->flags)) {
 			/* This flag does not apply to '.replacement'
 			 * only to .rdev, so make sure to check that*/
 			struct md_rdev *rdev2 = rcu_dereference(
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 3d4878facc2..d919a9863e0 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -332,8 +332,8 @@ static int apci1032_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[1];
 	if (dev->irq) {
 		dev->read_subdev = s;
-		s->type		= COMEDI_SUBD_DI | SDF_CMD_READ;
-		s->subdev_flags	= SDF_READABLE;
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE | SDF_CMD_READ;
 		s->n_chan	= 1;
 		s->maxdata	= 1;
 		s->range_table	= &range_digital;
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 6247fdcedcb..71043a1c850 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -873,7 +873,7 @@ static int pci9111_auto_attach(struct comedi_device *dev,
 	pci9111_reset(dev);
 
 	if (pcidev->irq > 0) {
-		ret = request_irq(dev->irq, pci9111_interrupt,
+		ret = request_irq(pcidev->irq, pci9111_interrupt,
 				  IRQF_SHARED, dev->board_name, dev);
 		if (ret)
 			return ret;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e2774f9ecd5..7a55fe70434 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1543,6 +1543,8 @@ static int pl011_startup(struct uart_port *port)
 	/*
 	 * Provoke TX FIFO interrupt into asserting.
 	 */
+	spin_lock_irq(&uap->port.lock);
+
 	cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
 	writew(cr, uap->port.membase + UART011_CR);
 	writew(0, uap->port.membase + UART011_FBRD);
@@ -1567,6 +1569,8 @@ static int pl011_startup(struct uart_port *port)
 	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
+	spin_unlock_irq(&uap->port.lock);
+
 	/*
 	 * initialise the old status of the modem signals
 	 */
@@ -1636,11 +1640,13 @@ static void pl011_shutdown(struct uart_port *port)
 	 * it during startup().
 	 */
 	uap->autorts = false;
+	spin_lock_irq(&uap->port.lock);
 	cr = readw(uap->port.membase + UART011_CR);
 	uap->old_cr = cr;
 	cr &= UART011_CR_RTS | UART011_CR_DTR;
 	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
+	spin_unlock_irq(&uap->port.lock);
 
 	/*
 	 * disable break condition and fifos