viafb: make single framebuffer multiple adapter mode work

This patch implementes this mode (viafb_SAMM_ON set and
viafb_dual_fb not set) in a useful way for CRT and DVI devices.
The same content is shown on both devices in different video modes.
The first (primary) resolution must not be bigger than the secondary
one and determines the visible region. The same content is shown
centered on the secondary output.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

1 files changed, 23 insertions, 18 deletions

diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 399d50754c4..e8725c5235c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1467,28 +1467,31 @@ void viafb_set_vclock(u32 clk, int set_iga)
 	via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
 }
 
-static struct display_timing var_to_timing(const struct fb_var_screeninfo *var)
+static struct display_timing var_to_timing(const struct fb_var_screeninfo *var, u16 cxres, u16 cyres)
 {
 	struct display_timing timing;
+	u16 dx = (var->xres - cxres) / 2, dy = (var->yres - cyres) / 2;
 
-	timing.hor_addr = var->xres;
-	timing.hor_sync_start = timing.hor_addr + var->right_margin;
+	timing.hor_addr = cxres;
+	timing.hor_sync_start = timing.hor_addr + var->right_margin + dx;
 	timing.hor_sync_end = timing.hor_sync_start + var->hsync_len;
-	timing.hor_total = timing.hor_sync_end + var->left_margin;
-	timing.hor_blank_start = timing.hor_addr;
-	timing.hor_blank_end = timing.hor_total;
-	timing.ver_addr = var->yres;
-	timing.ver_sync_start = timing.ver_addr + var->lower_margin;
+	timing.hor_total = timing.hor_sync_end + var->left_margin + dx;
+	timing.hor_blank_start = timing.hor_addr + dx;
+	timing.hor_blank_end = timing.hor_total - dy;
+	timing.ver_addr = cyres;
+	timing.ver_sync_start = timing.ver_addr + var->lower_margin + dy;
 	timing.ver_sync_end = timing.ver_sync_start + var->vsync_len;
-	timing.ver_total = timing.ver_sync_end + var->upper_margin;
-	timing.ver_blank_start = timing.ver_addr;
-	timing.ver_blank_end = timing.ver_total;
+	timing.ver_total = timing.ver_sync_end + var->upper_margin + dy;
+	timing.ver_blank_start = timing.ver_addr + dy;
+	timing.ver_blank_end = timing.ver_total - dy;
 	return timing;
 }
 
-void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var, int iga)
+void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres, int iga)
 {
-	struct display_timing crt_reg = var_to_timing(var);
+	struct display_timing crt_reg = var_to_timing(var,
+		cxres ? cxres : var->xres, cyres ? cyres : var->yres);
 
 	if (iga == IGA1)
 		via_set_primary_timing(&crt_reg);
@@ -1842,7 +1845,7 @@ static void hw_init(void)
 
 int viafb_setmode(int video_bpp, int video_bpp1)
 {
-	int j;
+	int j, cxres = 0, cyres = 0;
 	int port;
 	u32 devices = viaparinfo->shared->iga1_devices
 		| viaparinfo->shared->iga2_devices;
@@ -1891,6 +1894,8 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	} else if (viafb_SAMM_ON) {
 		viafb_fill_var_timing_info(&var2, viafb_get_best_mode(
 			viafb_second_xres, viafb_second_yres, viafb_refresh1));
+		cxres = viafbinfo->var.xres;
+		cyres = viafbinfo->var.yres;
 		var2.bits_per_pixel = viafbinfo->var.bits_per_pixel;
 	}
 
@@ -1898,9 +1903,9 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (viafb_CRT_ON) {
 		if (viaparinfo->shared->iga2_devices & VIA_CRT
 			&& viafb_SAMM_ON)
-			viafb_fill_crtc_timing(&var2, IGA2);
+			viafb_fill_crtc_timing(&var2, cxres, cyres, IGA2);
 		else
-			viafb_fill_crtc_timing(&viafbinfo->var,
+			viafb_fill_crtc_timing(&viafbinfo->var, 0, 0,
 				(viaparinfo->shared->iga1_devices & VIA_CRT)
 				? IGA1 : IGA2);
 
@@ -1918,9 +1923,9 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (viafb_DVI_ON) {
 		if (viaparinfo->shared->tmds_setting_info.iga_path == IGA2
 			&& viafb_SAMM_ON)
-			viafb_dvi_set_mode(&var2, IGA2);
+			viafb_dvi_set_mode(&var2, cxres, cyres, IGA2);
 		else
-			viafb_dvi_set_mode(&viafbinfo->var,
+			viafb_dvi_set_mode(&viafbinfo->var, 0, 0,
 				viaparinfo->tmds_setting_info->iga_path);
 	}