mwifiex: add 802.11AC support

For STA mode, collect VHT realated IEs from the Beacons or Probe
Responses and append similar VHT related IEs to association
requests.

For AP mode, get VHT related capability information and share it
with cfg80211 at the time of wiphy register. This information is
further used by cfg80211 and hostapd to start an AP with 802.11AC
support.

Currently only 8897 supports 802.11AC.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 153 insertions, 24 deletions

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 81c84a29308..9667425362e 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -834,6 +834,66 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 	return ret;
 }
 
+static void
+mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo,
+		     struct rate_info *rate)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+
+	if (adapter->is_hw_11ac_capable) {
+		/* bit[1-0]: 00=LG 01=HT 10=VHT */
+		if (tx_htinfo & BIT(0)) {
+			/* HT */
+			rate->mcs = priv->tx_rate;
+			rate->flags |= RATE_INFO_FLAGS_MCS;
+		}
+		if (tx_htinfo & BIT(1)) {
+			/* VHT */
+			rate->mcs = priv->tx_rate & 0x0F;
+			rate->flags |= RATE_INFO_FLAGS_VHT_MCS;
+		}
+
+		if (tx_htinfo & (BIT(1) | BIT(0))) {
+			/* HT or VHT */
+			switch (tx_htinfo & (BIT(3) | BIT(2))) {
+			case 0:
+				/* This will be 20MHz */
+				break;
+			case (BIT(2)):
+				rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+				break;
+			case (BIT(3)):
+				rate->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
+				break;
+			case (BIT(3) | BIT(2)):
+				rate->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
+				break;
+			}
+
+			if (tx_htinfo & BIT(4))
+				rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+			if ((priv->tx_rate >> 4) == 1)
+				rate->nss = 2;
+			else
+				rate->nss = 1;
+		}
+	} else {
+		/*
+		 * Bit 0 in tx_htinfo indicates that current Tx rate
+		 * is 11n rate. Valid MCS index values for us are 0 to 15.
+		 */
+		if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) {
+			rate->mcs = priv->tx_rate;
+			rate->flags |= RATE_INFO_FLAGS_MCS;
+			if (tx_htinfo & BIT(1))
+				rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+			if (tx_htinfo & BIT(2))
+				rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
+		}
+	}
+}
+
 /*
  * This function dumps the station information on a buffer.
  *
@@ -873,20 +933,7 @@ mwifiex_dump_station_info(struct mwifiex_private *priv,
 			      HostCmd_ACT_GEN_GET, DTIM_PERIOD_I,
 			      &priv->dtim_period);
 
-	/*
-	 * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid
-	 * MCS index values for us are 0 to 15.
-	 */
-	if ((priv->tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) {
-		sinfo->txrate.mcs = priv->tx_rate;
-		sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
-		/* 40MHz rate */
-		if (priv->tx_htinfo & BIT(1))
-			sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
-		/* SGI enabled */
-		if (priv->tx_htinfo & BIT(2))
-			sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
-	}
+	mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate);
 
 	sinfo->signal_avg = priv->bcn_rssi_avg;
 	sinfo->rx_bytes = priv->stats.rx_bytes;
@@ -1295,20 +1342,22 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 	/* Set appropriate bands */
 	if (params->chandef.chan->band == IEEE80211_BAND_2GHZ) {
 		bss_cfg->band_cfg = BAND_CONFIG_BG;
+		config_bands = BAND_B | BAND_G;
 
-		if (cfg80211_get_chandef_type(&params->chandef) ==
-						NL80211_CHAN_NO_HT)
-			config_bands = BAND_B | BAND_G;
-		else
-			config_bands = BAND_B | BAND_G | BAND_GN;
+		if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
+			config_bands |= BAND_GN;
+
+		if (params->chandef.width > NL80211_CHAN_WIDTH_40)
+			config_bands |= BAND_GAC;
 	} else {
 		bss_cfg->band_cfg = BAND_CONFIG_A;
+		config_bands = BAND_A;
 
-		if (cfg80211_get_chandef_type(&params->chandef) ==
-						NL80211_CHAN_NO_HT)
-			config_bands = BAND_A;
-		else
-			config_bands = BAND_AN | BAND_A;
+		if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
+			config_bands |= BAND_AN;
+
+		if (params->chandef.width > NL80211_CHAN_WIDTH_40)
+			config_bands |= BAND_AAC;
 	}
 
 	if (!((config_bands | priv->adapter->fw_bands) &
@@ -1881,6 +1930,79 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 	return 0;
 }
 
+static void mwifiex_setup_vht_caps(struct ieee80211_sta_vht_cap *vht_info,
+				   struct mwifiex_private *priv)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u32 vht_cap = 0, cap = adapter->hw_dot_11ac_dev_cap;
+
+	vht_info->vht_supported = true;
+
+	switch (GET_VHTCAP_MAXMPDULEN(cap)) {
+	case 0x00:
+		vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895;
+		break;
+	case 0x01:
+		vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991;
+		break;
+	case 0x10:
+		vht_cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454;
+	    break;
+	default:
+	    dev_err(adapter->dev, "unsupported MAX MPDU len\n");
+	    break;
+	}
+
+	if (ISSUPP_11ACVHTHTCVHT(cap))
+		vht_cap |= IEEE80211_VHT_CAP_HTC_VHT;
+
+	if (ISSUPP_11ACVHTTXOPPS(cap))
+		vht_cap |= IEEE80211_VHT_CAP_VHT_TXOP_PS;
+
+	if (ISSUPP_11ACMURXBEAMFORMEE(cap))
+		vht_cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE;
+
+	if (ISSUPP_11ACMUTXBEAMFORMEE(cap))
+		vht_cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
+
+	if (ISSUPP_11ACSUBEAMFORMER(cap))
+		vht_cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
+
+	if (ISSUPP_11ACSUBEAMFORMEE(cap))
+		vht_cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
+
+	if (ISSUPP_11ACRXSTBC(cap))
+		vht_cap |= IEEE80211_VHT_CAP_RXSTBC_1;
+
+	if (ISSUPP_11ACTXSTBC(cap))
+		vht_cap |= IEEE80211_VHT_CAP_TXSTBC;
+
+	if (ISSUPP_11ACSGI160(cap))
+		vht_cap |= IEEE80211_VHT_CAP_SHORT_GI_160;
+
+	if (ISSUPP_11ACSGI80(cap))
+		vht_cap |= IEEE80211_VHT_CAP_SHORT_GI_80;
+
+	if (ISSUPP_11ACLDPC(cap))
+		vht_cap |= IEEE80211_VHT_CAP_RXLDPC;
+
+	if (ISSUPP_11ACBW8080(cap))
+		vht_cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ;
+
+	if (ISSUPP_11ACBW160(cap))
+		vht_cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+
+	vht_info->cap = vht_cap;
+
+	/* Update MCS support for VHT */
+	vht_info->vht_mcs.rx_mcs_map = cpu_to_le16(
+				adapter->hw_dot_11ac_mcs_support & 0xFFFF);
+	vht_info->vht_mcs.rx_highest = 0;
+	vht_info->vht_mcs.tx_mcs_map = cpu_to_le16(
+				adapter->hw_dot_11ac_mcs_support >> 16);
+	vht_info->vht_mcs.tx_highest = 0;
+}
+
 /*
  * This function sets up the CFG802.11 specific HT capability fields
  * with default values.
@@ -2094,11 +2216,18 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	priv->netdev = dev;
 
 	mwifiex_setup_ht_caps(&wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap, priv);
+	if (adapter->is_hw_11ac_capable)
+		mwifiex_setup_vht_caps(
+			&wiphy->bands[IEEE80211_BAND_2GHZ]->vht_cap, priv);
 
 	if (adapter->config_bands & BAND_A)
 		mwifiex_setup_ht_caps(
 			&wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap, priv);
 
+	if ((adapter->config_bands & BAND_A) && adapter->is_hw_11ac_capable)
+		mwifiex_setup_vht_caps(
+			&wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap, priv);
+
 	dev_net_set(dev, wiphy_net(wiphy));
 	dev->ieee80211_ptr = priv->wdev;
 	dev->ieee80211_ptr->iftype = priv->bss_mode;