edac: move nr_pages to dimm struct

The number of pages is a dimm property. Move it to the dimm struct.

After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.

A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 6 insertions, 16 deletions

diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index d4153d6cfe3..d6f3a2d0f70 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -617,9 +617,7 @@ static void i7300_enable_error_reporting(struct mem_ctl_info *mci)
 static int decode_mtr(struct i7300_pvt *pvt,
 		      int slot, int ch, int branch,
 		      struct i7300_dimm_info *dinfo,
-		      struct csrow_info *p_csrow,
-		      struct dimm_info *dimm,
-		      u32 *nr_pages)
+		      struct dimm_info *dimm)
 {
 	int mtr, ans, addrBits, channel;
 
@@ -651,7 +649,6 @@ static int decode_mtr(struct i7300_pvt *pvt,
 	addrBits -= 3;	/* 8 bits per bytes */
 
 	dinfo->megabytes = 1 << addrBits;
-	*nr_pages = dinfo->megabytes << 8;
 
 	debugf2("\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
 
@@ -664,8 +661,6 @@ static int decode_mtr(struct i7300_pvt *pvt,
 	debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]);
 	debugf2("\t\tSIZE: %d MB\n", dinfo->megabytes);
 
-	p_csrow->csrow_idx = slot;
-
 	/*
 	 * The type of error detection actually depends of the
 	 * mode of operation. When it is just one single memory chip, at
@@ -675,6 +670,7 @@ static int decode_mtr(struct i7300_pvt *pvt,
 	 * See datasheet Sections 7.3.6 to 7.3.8
 	 */
 
+	dimm->nr_pages = MiB_TO_PAGES(dinfo->megabytes);
 	dimm->grain = 8;
 	dimm->mtype = MEM_FB_DDR2;
 	if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
@@ -774,11 +770,9 @@ static int i7300_init_csrows(struct mem_ctl_info *mci)
 {
 	struct i7300_pvt *pvt;
 	struct i7300_dimm_info *dinfo;
-	struct csrow_info *p_csrow;
 	int rc = -ENODEV;
 	int mtr;
 	int ch, branch, slot, channel;
-	u32 nr_pages;
 	struct dimm_info *dimm;
 
 	pvt = mci->pvt_info;
@@ -804,7 +798,6 @@ static int i7300_init_csrows(struct mem_ctl_info *mci)
 	}
 
 	/* Get the set of MTR[0-7] regs by each branch */
-	nr_pages = 0;
 	for (slot = 0; slot < MAX_SLOTS; slot++) {
 		int where = mtr_regs[slot];
 		for (branch = 0; branch < MAX_BRANCHES; branch++) {
@@ -815,21 +808,18 @@ static int i7300_init_csrows(struct mem_ctl_info *mci)
 				int channel = to_channel(ch, branch);
 
 				dinfo = &pvt->dimm_info[slot][channel];
-				p_csrow = &mci->csrows[slot];
 
-				dimm = p_csrow->channels[branch * MAX_CH_PER_BRANCH + ch].dimm;
+				dimm = mci->csrows[slot].channels[branch * MAX_CH_PER_BRANCH + ch].dimm;
 
 				mtr = decode_mtr(pvt, slot, ch, branch,
-						 dinfo, p_csrow, dimm,
-						 &nr_pages);
+						 dinfo, dimm);
+
 				/* if no DIMMS on this row, continue */
 				if (!MTR_DIMMS_PRESENT(mtr))
 					continue;
 
-				/* Update per_csrow memory count */
-				p_csrow->nr_pages += nr_pages;
-
 				rc = 0;
+
 			}
 		}
 	}