Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

24 files changed, 1527 insertions, 253 deletions

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index c26200b40a4..72ee8c1fba4 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -58,7 +58,7 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 libfdtheader := fdt.h libfdt.h libfdt_internal.h
 
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
 	$(addprefix $(obj)/,$(libfdtheader))
 
 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
@@ -171,6 +171,7 @@ quiet_cmd_wrap	= WRAP    $@
 		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
+image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.maple
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 27bd267d631..a7511f2d844 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -23,19 +23,26 @@
 
 	soc5200@f0000000 {
 		timer@600 {	// General Purpose Timer
+			#gpio-cells = <2>;
 			fsl,has-wdt;
+			gpio-controller;
 		};
 
-		rtc@800 {
-			status = "disabled";
+		timer@610 {
+			#gpio-cells = <2>;
+			gpio-controller;
 		};
 
-		can@900 {
+		rtc@800 {
 			status = "disabled";
 		};
 
-		can@980 {
-			status = "disabled";
+		spi@f00 {
+			msp430@0 {
+				compatible = "spidev";
+				spi-max-frequency = <32000>;
+				reg = <0>;
+			};
 		};
 
 		psc@2000 {		// PSC1
@@ -73,11 +80,16 @@
 		};
 
 		i2c@3d00 {
-			rtc@50 {
+			eeprom@50 {
 				compatible = "at,24c08";
 				reg = <0x50>;
 			};
 
+			rtc@56 {
+				compatible = "mc,rv3029c2";
+				reg = <0x56>;
+			};
+
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
@@ -90,11 +102,22 @@
 	};
 
 	pci@f0000d00 {
-		status = "disabled";
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {
-		ranges = <0 0 0xff000000 0x1000000>;
+		ranges = <0 0 0xff000000 0x1000000
+			  4 0 0x60000000 0x0001000>;
 
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
@@ -122,5 +145,25 @@
 				reg = <0x00f00000 0x100000>;
 			};
 		};
+
+		can@4,0 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x000 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>; // Level-low
+		};
+
+		can@4,100 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x100 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>;  // Level-low
+		};
+
+		serial@4,200 {
+			compatible = "nxp,sc28l92";
+			reg = <4 0x200 0x10>;
+			interrupts = <1 3 3>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 83f4b79dff8..2266bbb303d 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -269,14 +269,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -290,25 +292,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index fc3a331dd39..429e87d9ace 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -267,14 +267,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -288,25 +290,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index c0671cc9812..d81201ac2ca 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -267,14 +267,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -288,25 +290,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
deleted file mode 100644
index 7988598da4c..00000000000
--- a/arch/powerpc/boot/dts/hcu4.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2.  This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	model = "netstal,hcu4";
-	compatible = "netstal,hcu4";
-	dcr-parent = <0x1>;
-
-	aliases {
-		ethernet0 = "/plb/opb/ethernet@ef600800";
-		serial0 = "/plb/opb/serial@ef600300";
-	};
-
-	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405GPr";
-			reg = <0x0>;
-			clock-frequency = <0>;		/* Filled in by U-Boot */
-			timebase-frequency = <0x0>;	/* Filled in by U-Boot */
-			i-cache-line-size = <0x20>;
-			d-cache-line-size = <0x20>;
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-			dcr-controller;
-			dcr-access-method = "native";
-			linux,phandle = <0x1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	/* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0x0>;
-		dcr-reg = <0xc0 0x9>;
-		#address-cells = <0x0>;
-		#size-cells = <0x0>;
-		#interrupt-cells = <0x2>;
-		linux,phandle = <0x2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-		clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405gp";
-			dcr-reg = <0x10 0x2>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x62>;
-			num-tx-chans = <0x1>;
-			num-rx-chans = <0x1>;
-			interrupt-parent = <0x2>;
-			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
-			linux,phandle = <0x3>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405gp", "ibm,opb";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges = <0xef600000 0xef600000 0xa00000>;
-			dcr-reg = <0xa0 0x5>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x8>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0x0>;/* Filled in by U-Boot */
-				current-speed = <0>;	/* Filled in by U-Boot */
-				interrupt-parent = <0x2>;
-				interrupts = <0x0 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <0xef600500 0x11>;
-				interrupt-parent = <0x2>;
-				interrupts = <0x2 0x4>;
-			};
-
-			GPIO: gpio@ef600700 {
-				compatible = "ibm,gpio-405gp";
-				reg = <0xef600700 0x20>;
-			};
-
-			EMAC: ethernet@ef600800 {
-				device_type = "network";
-				compatible = "ibm,emac-405gp", "ibm,emac";
-				interrupt-parent = <0x2>;
-				interrupts = <0xf 0x4 0x9 0x4>;
-				local-mac-address = [00 00 00 00 00 00];
-				reg = <0xef600800 0x70>;
-				mal-device = <0x3>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0x0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "rmii";
-				phy-map = <0x1>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <0x12 0x2>;
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			sram@0,0 {
-				reg = <0x0 0x0 0x80000>;
-			};
-
-			flash@0,80000 {
-				compatible = "jedec-flash";
-				bank-width = <0x1>;
-				reg = <0x0 0x80000 0x80000>;
-				#address-cells = <0x1>;
-				#size-cells = <0x1>;
-
-				partition@0 {
-					label = "OpenBIOS";
-					reg = <0x0 0x80000>;
-					read-only;
-				};
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index bdb7fc0fa33..296c572ea60 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -306,7 +306,7 @@
 	localbus@fdf05000 {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		compatible = "fsl,mpc8560-localbus";
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
 		reg = <0xfdf05000 0x68>;
 
 		ranges = <0x0 0x0 0xe0000000 0x00800000
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 1360d2f6902..ededaf5ac01 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -213,6 +213,15 @@
 				linux,network-index = <2>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				mode = "peripheral";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				usb-clock = <5>;
+			};
 		};
 
 		cpm2_pio_c: gpio-controller@10d40 {
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index bc27548e895..7ab286ab530 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -147,6 +147,8 @@
 		};
 
 		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <0xf00 0x20>;
 			interrupts = <2 13 0 2 14 0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index b53d1df11e2..505dc842d80 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -390,7 +390,8 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349e-localbus",
-			     "fsl,pq2pro-localbus";
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
 		reg = <0xe0005000 0xd8>;
 		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
 			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 1be9743ab5e..b9b8719a620 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -150,7 +150,7 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p1022ds-pixis";
+			compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x30>;
 			interrupt-parent = <&mpic>;
 			/*
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index dae403100f2..66f03d6477b 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -118,6 +118,11 @@
 			};
 		};
 
+		board-control@3,0 {
+			compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <0x3 0x0 0x30>;
+		};
+
 		nand@4,0 {
 			compatible = "fsl,elbc-fcm-nand";
 			reg = <0x4 0x0 0x40000>;
diff --git a/arch/powerpc/boot/dts/p2040rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 7d84e391c63..79b6895027c 100644
--- a/arch/powerpc/boot/dts/p2040rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -1,5 +1,5 @@
 /*
- * P2040RDB Device Tree Source
+ * P2041RDB Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,11 +32,11 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p2040si.dtsi"
+/include/ "p2041si.dtsi"
 
 / {
-	model = "fsl,P2040RDB";
-	compatible = "fsl,P2040RDB";
+	model = "fsl,P2041RDB";
+	compatible = "fsl,P2041RDB";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -97,13 +101,8 @@
 			};
 		};
 
-		usb0: usb@210000 {
-			phy_type = "utmi";
-		};
-
 		usb1: usb@211000 {
 			dr_mode = "host";
-			phy_type = "utmi";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p2040si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
index 5fdbb24c076..f7492edd0df 100644
--- a/arch/powerpc/boot/dts/p2040si.dtsi
+++ b/arch/powerpc/boot/dts/p2041si.dtsi
@@ -1,5 +1,5 @@
 /*
- * P2040 Silicon Device Tree Source
+ * P2041 Silicon Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,13 +35,14 @@
 /dts-v1/;
 
 / {
-	compatible = "fsl,P2040";
+	compatible = "fsl,P2041";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -109,6 +110,74 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -128,14 +197,14 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
 		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+			compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
 			reg = <0x10000 0x1000>;
 			interrupts = <16 2 1 27>;
 		};
@@ -226,7 +295,7 @@
 		};
 
 		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
+			compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
 			reg = <0xe1000 0x1000>;
 			clock-frequency = <0>;
 		};
@@ -238,45 +307,45 @@
 		};
 
 		sfp: sfp@e8000 {
-			compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
+			compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
 			reg	   = <0xe8000 0x1000>;
 		};
 
 		serdes: serdes@ea000 {
-			compatible = "fsl,p2040-serdes";
+			compatible = "fsl,p2041-serdes";
 			reg	   = <0xea000 0x1000>;
 		};
 
 		dma0: dma@100300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x100300 0x4>;
 			ranges = <0x0 0x100100 0x200>;
 			cell-index = <0>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <28 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <29 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <30 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -287,33 +356,33 @@
 		dma1: dma@101300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x101300 0x4>;
 			ranges = <0x0 0x101100 0x200>;
 			cell-index = <1>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <32 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <33 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <34 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -324,22 +393,20 @@
 		spi@110000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
+			compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
 			reg = <0x110000 0x1000>;
 			interrupts = <53 0x2 0 0>;
 			fsl,espi-num-chipselects = <4>;
-
 		};
 
 		sdhc: sdhc@114000 {
-			compatible = "fsl,p2040-esdhc", "fsl,esdhc";
+			compatible = "fsl,p2041-esdhc", "fsl,esdhc";
 			reg = <0x114000 0x1000>;
 			interrupts = <48 2 0 0>;
 			sdhci,auto-cmd12;
 			clock-frequency = <0>;
 		};
 
-
 		i2c@118000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -417,7 +484,7 @@
 		};
 
 		gpio0: gpio@130000 {
-			compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
+			compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
 			reg = <0x130000 0x1000>;
 			interrupts = <55 2 0 0>;
 			#gpio-cells = <2>;
@@ -425,32 +492,34 @@
 		};
 
 		usb0: usb@210000 {
-			compatible = "fsl,p2040-usb2-mph",
+			compatible = "fsl,p2041-usb2-mph",
 					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			reg = <0x210000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <44 0x2 0 0>;
+			phy_type = "utmi";
 			port0;
 		};
 
 		usb1: usb@211000 {
-			compatible = "fsl,p2040-usb2-dr",
+			compatible = "fsl,p2041-usb2-dr",
 					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			reg = <0x211000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <45 0x2 0 0>;
+			phy_type = "utmi";
 		};
 
 		sata@220000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x220000 0x1000>;
 			interrupts = <68 0x2 0 0>;
 		};
 
 		sata@221000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x221000 0x1000>;
 			interrupts = <69 0x2 0 0>;
 		};
@@ -534,19 +603,19 @@
 	};
 
 	localbus@ffe124000 {
-		compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
+		compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
 		interrupts = <25 2 0 0>;
 		#address-cells = <2>;
 		#size-cells = <1>;
 	};
 
 	pci0: pcie@ffe200000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi0>;
 		interrupts = <16 2 1 15>;
 		pcie@0 {
@@ -568,12 +637,12 @@
 	};
 
 	pci1: pcie@ffe201000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi1>;
 		interrupts = <16 2 1 14>;
 		pcie@0 {
@@ -595,12 +664,12 @@
 	};
 
 	pci2: pcie@ffe202000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi2>;
 		interrupts = <16 2 1 13>;
 		pcie@0 {
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index 69cae674f39..bbd113b49a8 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -147,8 +151,8 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p3041ds-pixis";
-			reg = <3 0 0x20>;
+			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
index 8b695801f50..87130b732bc 100644
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ b/arch/powerpc/boot/dts/p3041si.dtsi
@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -114,6 +115,74 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +202,7 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
new file mode 100644
index 00000000000..08b9193213e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -0,0 +1,238 @@
+/*
+ * P3060QDS Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p3060si.dtsi"
+
+/ {
+	model = "fsl,P3060QDS";
+	compatible = "fsl,P3060QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,en25q32b";
+				reg = <1>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi1 {
+					label = "spi1";
+					reg = <0x00000000 0x00400000>;
+				};
+			};
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at45db081d";
+				reg = <2>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi1 {
+					label = "spi2";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+			flash@3 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,sst25wf040";
+				reg = <3>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi3 {
+					label = "spi3";
+					reg = <0x00000000 0x00080000>;
+				};
+			};
+		};
+
+		i2c@118000 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@53 {
+				compatible = "at24,24c256";
+				reg = <0x53>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		usb0: usb@210000 {
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x100>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
new file mode 100644
index 00000000000..68947e157bb
--- /dev/null
+++ b/arch/powerpc/boot/dts/p3060si.dtsi
@@ -0,0 +1,719 @@
+/*
+ * P3060 Silicon Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,P3060";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu4: PowerPC,e500mc@4 {
+			device_type = "cpu";
+			reg = <4>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu5: PowerPC,e500mc@5 {
+			device_type = "cpu";
+			reg = <5>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@44000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu4>;
+			reg = <0x44000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@45000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu5>;
+			reg = <0x45000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@46000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu6>;
+			reg = <0x46000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@47000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu7>;
+			reg = <0x47000 0x1000>;
+		};
+	};
+
+	soc: soc@ffe000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		soc-sram-error {
+			compatible = "fsl,soc-sram-error";
+			interrupts = <16 2 1 29>;
+		};
+
+		corenet-law@0 {
+			compatible = "fsl,corenet-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <32>;
+		};
+
+		ddr: memory-controller@8000 {
+			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+			reg = <0x8000 0x1000>;
+			interrupts = <16 2 1 23>;
+		};
+
+		cpc: l3-cache-controller@10000 {
+			compatible = "fsl,p3060-l3-cache-controller", "cache";
+			reg = <0x10000 0x1000
+			       0x11000 0x1000>;
+			interrupts = <16 2 1 27>;
+		};
+
+		corenet-cf@18000 {
+			compatible = "fsl,corenet-cf";
+			reg = <0x18000 0x1000>;
+			interrupts = <16 2 1 31>;
+			fsl,ccf-num-csdids = <32>;
+			fsl,ccf-num-snoopids = <32>;
+		};
+
+		iommu@20000 {
+			compatible = "fsl,pamu-v1.0", "fsl,pamu";
+			reg = <0x20000 0x5000>;
+			interrupts = <
+				24 2 0 0
+				16 2 1 30>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			reg = <0x40000 0x40000>;
+			compatible = "fsl,mpic", "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi0: msi@41600 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41600 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
+		};
+
+		msi1: msi@41800 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41800 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe8 0 0 0
+				0xe9 0 0 0
+				0xea 0 0 0
+				0xeb 0 0 0
+				0xec 0 0 0
+				0xed 0 0 0
+				0xee 0 0 0
+				0xef 0 0 0>;
+		};
+
+		msi2: msi@41a00 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41a00 0x200>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xf0 0 0 0
+				0xf1 0 0 0
+				0xf2 0 0 0
+				0xf3 0 0 0
+				0xf4 0 0 0
+				0xf5 0 0 0
+				0xf6 0 0 0
+				0xf7 0 0 0>;
+		};
+
+		rmu: rmu@d3000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,srio-rmu";
+			reg = <0xd3000 0x500>;
+			ranges = <0x0 0xd3000 0x500>;
+
+			message-unit@0 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x0 0x100>;
+				interrupts = <
+					60 2 0 0  /* msg1_tx_irq */
+					61 2 0 0>;/* msg1_rx_irq */
+			};
+			message-unit@100 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x100 0x100>;
+				interrupts = <
+					62 2 0 0  /* msg2_tx_irq */
+					63 2 0 0>;/* msg2_rx_irq */
+			};
+			doorbell-unit@400 {
+				compatible = "fsl,srio-dbell-unit";
+				reg = <0x400 0x80>;
+				interrupts = <
+					56 2 0 0  /* bell_outb_irq */
+					57 2 0 0>;/* bell_inb_irq */
+			};
+			port-write-unit@4e0 {
+				compatible = "fsl,srio-port-write-unit";
+				reg = <0x4e0 0x20>;
+				interrupts = <16 2 1 11>;
+			};
+		};
+
+		guts: global-utilities@e0000 {
+			compatible = "fsl,qoriq-device-config-1.0";
+			reg = <0xe0000 0xe00>;
+			fsl,has-rstcr;
+			#sleep-cells = <1>;
+			fsl,liodn-bits = <12>;
+		};
+
+		pins: global-utilities@e0e00 {
+			compatible = "fsl,qoriq-pin-control-1.0";
+			reg = <0xe0e00 0x200>;
+			#sleep-cells = <2>;
+		};
+
+		clockgen: global-utilities@e1000 {
+			compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+			reg = <0xe1000 0x1000>;
+			clock-frequency = <0>;
+		};
+
+		rcpm: global-utilities@e2000 {
+			compatible = "fsl,qoriq-rcpm-1.0";
+			reg = <0xe2000 0x1000>;
+			#sleep-cells = <1>;
+		};
+
+		sfp: sfp@e8000 {
+			compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+			reg	   = <0xe8000 0x1000>;
+		};
+
+		serdes: serdes@ea000 {
+			compatible = "fsl,p3060-serdes";
+			reg	   = <0xea000 0x1000>;
+		};
+
+		dma0: dma@100300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+			reg = <0x100300 0x4>;
+			ranges = <0x0 0x100100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <28 2 0 0>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <29 2 0 0>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <30 2 0 0>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <31 2 0 0>;
+			};
+		};
+
+		dma1: dma@101300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+			reg = <0x101300 0x4>;
+			ranges = <0x0 0x101100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <32 2 0 0>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <33 2 0 0>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <34 2 0 0>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p3060-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <35 2 0 0>;
+			};
+		};
+
+		spi@110000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
+			reg = <0x110000 0x1000>;
+			interrupts = <53 0x2 0 0>;
+			fsl,espi-num-chipselects = <4>;
+		};
+
+		i2c@118000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x118000 0x100>;
+			interrupts = <38 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@118100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x118100 0x100>;
+			interrupts = <38 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@119000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <2>;
+			compatible = "fsl-i2c";
+			reg = <0x119000 0x100>;
+			interrupts = <39 2 0 0>;
+			dfsrr;
+		};
+
+		i2c@119100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <3>;
+			compatible = "fsl-i2c";
+			reg = <0x119100 0x100>;
+			interrupts = <39 2 0 0>;
+			dfsrr;
+		};
+
+		serial0: serial@11c500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2 0 0>;
+		};
+
+		serial1: serial@11c600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2 0 0>;
+		};
+
+		serial2: serial@11d500 {
+			cell-index = <2>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2 0 0>;
+		};
+
+		serial3: serial@11d600 {
+			cell-index = <3>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2 0 0>;
+		};
+
+		gpio0: gpio@130000 {
+			compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
+			reg = <0x130000 0x1000>;
+			interrupts = <55 2 0 0>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		usb0: usb@210000 {
+			compatible = "fsl,p3060-usb2-mph",
+					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			reg = <0x210000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x2 0 0>;
+		};
+
+		usb1: usb@211000 {
+			compatible = "fsl,p3060-usb2-dr",
+					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			reg = <0x211000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <45 0x2 0 0>;
+		};
+
+		crypto: crypto@300000 {
+			compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x300000 0x10000>;
+			ranges = <0 0x300000 0x10000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <92 2 0 0>;
+
+			sec_jr0: jr@1000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x1000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <88 2 0 0>;
+			};
+
+			sec_jr1: jr@2000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x2000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <89 2 0 0>;
+			};
+
+			sec_jr2: jr@3000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x3000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <90 2 0 0>;
+			};
+
+			sec_jr3: jr@4000 {
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&mpic>;
+				interrupts = <91 2 0 0>;
+			};
+
+			rtic@6000 {
+				compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x6000 0x100>;
+				ranges = <0x0 0x6100 0xe00>;
+
+				rtic_a: rtic-a@0 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x00 0x20 0x100 0x80>;
+				};
+
+				rtic_b: rtic-b@20 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x20 0x20 0x200 0x80>;
+				};
+
+				rtic_c: rtic-c@40 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x40 0x20 0x300 0x80>;
+				};
+
+				rtic_d: rtic-d@60 {
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+					reg = <0x60 0x20 0x500 0x80>;
+				};
+			};
+		};
+
+		sec_mon: sec_mon@314000 {
+			compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+			reg = <0x314000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <93 2 0 0>;
+		};
+	};
+
+	rapidio@ffe0c0000 {
+		compatible = "fsl,srio";
+		interrupts = <16 2 1 11>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <1>;
+		};
+
+		port2 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <2>;
+		};
+	};
+
+	localbus@ffe124000 {
+		compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+		interrupts = <25 2 0 0>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+	};
+
+	pci0: pcie@ffe200000 {
+		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0x0 0xff>;
+		clock-frequency = <33333333>;
+		fsl,msi = <&msi0>;
+		interrupts = <16 2 1 15>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 15>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 40 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		bus-range = <0 0xff>;
+		clock-frequency = <33333333>;
+		fsl,msi = <&msi1>;
+		interrupts = <16 2 1 14>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			interrupts = <16 2 1 14>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 41 1 0 0
+				0000 0 0 2 &mpic 5 1 0 0
+				0000 0 0 3 &mpic 6 1 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index eb11098bb68..c7916dc2801 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -108,7 +112,8 @@
 
 	localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  3 0 0xf 0xffdf0000 0x00008000>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -116,6 +121,11 @@
 			bank-width = <2>;
 			device-width = <2>;
 		};
+
+		board-control@3,0 {
+			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+		};
 	};
 
 	pci0: pcie@ffe200000 {
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
index b71051f506c..f20c01ab247 100644
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ b/arch/powerpc/boot/dts/p4080si.dtsi
@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -77,7 +78,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: PowerPC,4080@0 {
+		cpu0: PowerPC,e500mc@0 {
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2_0>;
@@ -85,7 +86,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu1: PowerPC,4080@1 {
+		cpu1: PowerPC,e500mc@1 {
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2_1>;
@@ -93,7 +94,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu2: PowerPC,4080@2 {
+		cpu2: PowerPC,e500mc@2 {
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2_2>;
@@ -101,7 +102,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu3: PowerPC,4080@3 {
+		cpu3: PowerPC,e500mc@3 {
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2_3>;
@@ -109,7 +110,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu4: PowerPC,4080@4 {
+		cpu4: PowerPC,e500mc@4 {
 			device_type = "cpu";
 			reg = <4>;
 			next-level-cache = <&L2_4>;
@@ -117,7 +118,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu5: PowerPC,4080@5 {
+		cpu5: PowerPC,e500mc@5 {
 			device_type = "cpu";
 			reg = <5>;
 			next-level-cache = <&L2_5>;
@@ -125,7 +126,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu6: PowerPC,4080@6 {
+		cpu6: PowerPC,e500mc@6 {
 			device_type = "cpu";
 			reg = <6>;
 			next-level-cache = <&L2_6>;
@@ -133,7 +134,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu7: PowerPC,4080@7 {
+		cpu7: PowerPC,e500mc@7 {
 			device_type = "cpu";
 			reg = <7>;
 			next-level-cache = <&L2_7>;
@@ -143,6 +144,99 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-ddr@13000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr2>;
+			reg = <0x13000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@44000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu4>;
+			reg = <0x44000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@45000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu5>;
+			reg = <0x45000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@46000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu6>;
+			reg = <0x46000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@47000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu7>;
+			reg = <0x47000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -162,13 +256,13 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr1: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
-		memory-controller@9000 {
+		ddr2: memory-controller@9000 {
 			compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
 			reg = <0x9000 0x1000>;
 			interrupts = <16 2 1 22>;
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index 8366e2fd2fb..e6d40999ccd 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -147,8 +151,8 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p5020ds-pixis";
-			reg = <3 0 0x20>;
+			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
index 5e6048ec55b..e7948ad71fa 100644
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ b/arch/powerpc/boot/dts/p5020si.dtsi
@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -98,6 +99,69 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-ddr@13000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr2>;
+			reg = <0x13000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -117,13 +181,13 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr1: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
-		memory-controller@9000 {
+		ddr2: memory-controller@9000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x9000 0x1000>;
 			interrupts = <16 2 1 22>;
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 9e13ed8a119..72078eb1561 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -331,7 +331,7 @@
 	};
 
 	localbus@ff705000 {
-		compatible = "fsl,mpc8560-localbus";
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0xff705000 0x100>;	// BRx, ORx, etc.
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 64923245f0e..30bb4753577 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -138,6 +138,42 @@
 				clock-frequency = <0>; /* Filled in by zImage */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02540000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x03f40000 0x00040000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <0x03f80000 0x00080000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {