Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

1 files changed, 29 insertions, 4 deletions

diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 83f4b79dff8..2266bbb303d 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -269,14 +269,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -290,25 +292,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {