MIPS: Netlogic: Use PIC timer as a clocksource

The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC
frequencey. One of these can be used as a clocksource to provide
timestamps that is common across cores. This can be used in place
of the count/compare clocksource which is per-CPU.

On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits
of the PIC counter. On XLP, the whole 64-bit can be used.

Provide common macros and functions for PIC timer registers on XLR/XLS
and XLP, and use them to register a PIC clocksource.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4786/
Signed-off-by: John Crispin <blogic@openwrt.org>

4 files changed, 55 insertions, 3 deletions

diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index d42cd1a2a12..642f1e4c271 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -217,7 +217,7 @@ static void nlm_init_node_irqs(int node)
 		nlm_setup_pic_irq(node, i, i, irt);
 		/* set interrupts to first cpu in node */
 		nlm_pic_init_irt(nodep->picbase, irt, i,
-					node * NLM_CPUS_PER_NODE);
+					node * NLM_CPUS_PER_NODE, 0);
 		irqmask |= (1ull << i);
 	}
 	nodep->irqmask = irqmask;
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
index bd3e498157f..20f89bc0507 100644
--- a/arch/mips/netlogic/common/time.c
+++ b/arch/mips/netlogic/common/time.c
@@ -35,16 +35,68 @@
 #include <linux/init.h>
 
 #include <asm/time.h>
+#include <asm/cpu-features.h>
+
 #include <asm/netlogic/interrupt.h>
 #include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#if defined(CONFIG_CPU_XLP)
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#elif defined(CONFIG_CPU_XLR)
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+#else
+#error "Unknown CPU"
+#endif
 
 unsigned int __cpuinit get_c0_compare_int(void)
 {
 	return IRQ_TIMER;
 }
 
+static cycle_t nlm_get_pic_timer(struct clocksource *cs)
+{
+	uint64_t picbase = nlm_get_node(0)->picbase;
+
+	return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER);
+}
+
+static cycle_t nlm_get_pic_timer32(struct clocksource *cs)
+{
+	uint64_t picbase = nlm_get_node(0)->picbase;
+
+	return ~nlm_pic_read_timer32(picbase, PIC_CLOCK_TIMER);
+}
+
+static struct clocksource csrc_pic = {
+	.name		= "PIC",
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void nlm_init_pic_timer(void)
+{
+	uint64_t picbase = nlm_get_node(0)->picbase;
+
+	nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0);
+	if (current_cpu_data.cputype == CPU_XLR) {
+		csrc_pic.mask	= CLOCKSOURCE_MASK(32);
+		csrc_pic.read	= nlm_get_pic_timer32;
+	} else {
+		csrc_pic.mask	= CLOCKSOURCE_MASK(64);
+		csrc_pic.read	= nlm_get_pic_timer;
+	}
+	csrc_pic.rating = 1000;
+	clocksource_register_hz(&csrc_pic, PIC_CLK_HZ);
+}
+
 void __init plat_time_init(void)
 {
+	nlm_init_pic_timer();
 	mips_hpt_frequency = nlm_get_cpu_frequency();
 	pr_info("MIPS counter frequency [%ld]\n",
 			(unsigned long)mips_hpt_frequency);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 507230eeb76..ce838f95135 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -64,7 +64,7 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
 		.iotype		= UPIO_MEM32,		\
 		.flags		= (UPF_SKIP_TEST |	\
 			 UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
-		.uartclk	= PIC_CLKS_PER_SEC,	\
+		.uartclk	= PIC_CLK_HZ,		\
 		.type		= PORT_16550A,		\
 		.serial_in	= nlm_xlr_uart_in,	\
 		.serial_out	= nlm_xlr_uart_out,	\
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index c5ce6992ac4..54b301c809e 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -70,7 +70,7 @@ static void __init nlm_early_serial_setup(void)
 	s.iotype	= UPIO_MEM32;
 	s.regshift	= 2;
 	s.irq		= PIC_UART_0_IRQ;
-	s.uartclk	= PIC_CLKS_PER_SEC;
+	s.uartclk	= PIC_CLK_HZ;
 	s.serial_in	= nlm_xlr_uart_in;
 	s.serial_out	= nlm_xlr_uart_out;
 	s.mapbase	= uart_base;