diff options
author | Naga Radhesh <naga.radheshy@stericsson.com> | 2011-10-31 18:30:38 +0530 |
---|---|---|
committer | Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> | 2011-11-03 14:46:12 +0100 |
commit | 3e71fc9ee3d72c695cfb26143962eacb8906db20 (patch) | |
tree | aed7b2ba2cc43bce3da597d272c04d1f52c0865f | |
parent | 86903ef07425d65590d14abca59079a58af71ca3 (diff) |
hwmon:(lsm303dlh)enable X, Y and Z axis by defaultu8500-android-2.3_v4.30
Enable x,y and z axis bits of accelerometer,
to read data from x,y and z axis.
ST-Ericsson ID: 369951
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id:Ie8cdf30c210cd90520914b051c342050a80bf350
Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35929
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
-rw-r--r-- | drivers/hwmon/lsm303dlh_a.c | 7 | ||||
-rw-r--r-- | drivers/hwmon/lsm303dlhc_a.c | 7 |
2 files changed, 13 insertions, 1 deletions
diff --git a/drivers/hwmon/lsm303dlh_a.c b/drivers/hwmon/lsm303dlh_a.c index 4f58e2a75aa..d14468618ee 100644 --- a/drivers/hwmon/lsm303dlh_a.c +++ b/drivers/hwmon/lsm303dlh_a.c @@ -837,10 +837,15 @@ static ssize_t lsm303dlh_a_store_mode(struct device *dev, data = lsm303dlh_a_read(ddata, CTRL_REG1, "CTRL_REG1"); + /* + * If chip doesn't get reset during suspend/resume, + * x,y and z axis bits are getting cleared,so set + * these bits to get x,y,z axis data. + */ + data |= LSM303DLH_A_CR1_AXIS_ENABLE; data &= ~LSM303DLH_A_CR1_PM_MASK; ddata->mode = val; - data |= ((val << LSM303DLH_A_CR1_PM_BIT) & LSM303DLH_A_CR1_PM_MASK); error = lsm303dlh_a_write(ddata, CTRL_REG1, data, "CTRL_REG1"); diff --git a/drivers/hwmon/lsm303dlhc_a.c b/drivers/hwmon/lsm303dlhc_a.c index 1c6d25f9b87..a8b1cd95fa9 100644 --- a/drivers/hwmon/lsm303dlhc_a.c +++ b/drivers/hwmon/lsm303dlhc_a.c @@ -400,6 +400,13 @@ static ssize_t lsm303dlhc_a_store_mode(struct device *dev, data = lsm303dlhc_a_read(ddata, CTRL_REG1, "CTRL_REG1"); + /* + * If chip doesn't get reset during suspend/resume, + * x,y and z axis bits are getting cleared,so set + * these bits to get x,y,z data. + */ + data |= LSM303DLHC_A_CR1_AXIS_ENABLE; + data &= ~LSM303DLHC_A_CR1_MODE_MASK; ddata->mode = val; |