if ARCH_U8500

config UX500_SOC_COMMON
	bool
	default y
	select ARM_GIC
	select NOMADIK_GPIO
	select ARM_ERRATA_753970
	select SYS_SOC

config UX500_SOC_DBX500
	depends on UX500_SOC_DB5500 || UX500_SOC_DB8500
	bool

menu "Ux500 SoC"

config UX500_SOC_DB5500
	bool "DB5500"
	select UX500_SOC_DBX500

config UX500_SOC_DB8500
	bool "DB8500"
	select UX500_SOC_DBX500

endmenu

menu "Ux500 target platform (boards)"

config MACH_U8500
	bool "U8500 Development platform"
	depends on UX500_SOC_DB8500
	select TPS6105X
	help
	  Include support for the mop500 development platform.

config MACH_HREFV60
	bool "U85000 Development platform, HREFv60 version"
	depends on UX500_SOC_DB8500
	select MACH_U8500
	help
	  Include support for the HREFv60 new development platform.

config MACH_SNOWBALL
	bool "U8500 Snowball platform"
	depends on UX500_SOC_DB8500
	select MACH_U8500
	help
	  Include support for the snowball development platform.

config MACH_U5500
	bool "U5500 Development platform"
	depends on UX500_SOC_DB5500
	help
	  Include support for the U5500 development platform.
endmenu

choice
	prompt "Ux500 UIB Keylayout"
	default KEYLAYOUT_LAYOUT1

config KEYLAYOUT_LAYOUT1
	bool "UIB Keylayout 1; for generic users"
	help
	  Supported keylayout for some numerics, power/call buttons,
	  volume control etc

config KEYLAYOUT_LAYOUT2
	bool "UIB Keylayout 2; for connectivity users"
	help
	  Supports keylayout numerics 0-9, left/right/up/down/back/
	  enter keys and special character "."(dot)

endchoice

choice
	prompt "Ux500 sched_clock timer"
	default UX500_MTU_TIMER

config UX500_PRCMU_TIMER
	bool "PRCMU Timer sched_clock"
	depends on !HAS_MTU
	help
	  Add support for an always on sched_clock, required for
	  proper cpuidle and suspend.

config UX500_MTU_TIMER
	bool "Multi Timer Unit sched_clock"
	help
	  Add sched_clock support for the Multi Timer Unit.
	  Since mtu isn't always on cpuidle will not
	  work with this clock.

endchoice

config UX500_PRCMU_QOS_POWER
	bool "UX500 PRCMU power QoS support"
	default y
	help
	  Add support for PRCMU power Quality of Service

config UX500_PRCMU_DEBUG
	bool "PRCMU debug"
	depends on DEBUG_FS
	help
	  Add support for PRCMU debug

config UX500_DEBUG_UART
	int "Ux500 UART to use for low-level debug"
	default 2
	help
	  Choose the UART on which kernel low-level debug messages should be
	  output.

config U8500_REGULATOR_DEBUG
	bool "Regulator debug support"
	depends on REGULATOR_VIRTUAL_CONSUMER
	help
	  Add support for U8500 regulator debug

config U5500_MODEM_IRQ
	bool "Modem IRQ support"
	depends on UX500_SOC_DB5500
	default y
	help
	  Add support for handling IRQ:s from modem side

config TEE_UX500
	bool "Trusted Execution Environment (TEE) ux500 hardware support"
	depends on (TEE_SUPPORT && MACH_U8500)
	default y
	help
	  Adds TEE hardware support for ux500 platforms.

config TEE_SVP
	bool "Trusted Execution Environment (TEE) ux500 SVP support"
	depends on (TEE_SUPPORT && (MACH_U8500_SIMULATOR || MACH_U5500_SIMULATOR))
	default y
	help
	  Adds TEE support for SVP in ux500 platforms.

config DB8500_MLOADER
	bool "Modem firmware upload/download support"
	depends on UX500_SOC_DB8500
	select DBX500_MLOADER
	help
	  Adds Modem firmware upload/download support to DB8500.

config U5500_MLOADER
	bool "mLoader, mem config from kernel boot args exported to sysfs"
	depends on UX500_SOC_DB5500
	help
	  Link between boot args and user space program that loads the modem ELF.
	  This is used to expose the modem parameters using sysfs interface.

config UX500_DEBUG_HWREG
	bool "Debug hardware registers from userspace"
	depends on (DEBUG_FS && UX500_SOC_DB8500)
	help
	  Adds various debug files to access registers.
	  This should never ever be used for anything else than debugging.

config UX500_DEBUG_NO_LAUTERBACH
       bool "Disable clocks needed for Lauterbach debugging"
       help
	  Disable clocks needed for Lauterbach debugging at boot.
	  If yes, you will reduce the power consumption.

config UX500_L2X0_PREFETCH_CTRL
	bool "PL310 prefetch control"
	depends on (UX500_SOC_DB8500 || UX500_SOC_DB5500) && \
			(TEE_UX500 && CACHE_L2X0)
	default y
	help
	  Adds interface to control instruction and data prefetch.
	  Communication with Trustzone is done through TEE driver.

source "arch/arm/mach-ux500/Kconfig-arch"
source "arch/arm/mach-ux500/pm/Kconfig"
endif