aboutsummaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2011-05-21ASoC: UDA134x: Remove POWER_OFF_ON_STANDBY define.Marek Belisko
commit bf707de21fec7bb203dace2d0a2bbd124d1b36ca upstream. Define POWER_OFF_ON_STANDBY cause trobles when trying to get some sound from codec because code for bias setup was not compiled (define wasn't defined). This define was removed in commit: cc3202f5 but again introduced by commit: f0fba2ad1 which then completely break codec functionality so remove it again. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02ASoC: codecs: JZ4740: Fix OOPSLars-Peter Clausen
commit 1fdf9b49e9e7788d09bad4b08a6a821ac39798f3 upstream. Commit ce6120cc(ASoC: Decouple DAPM from CODECs) changed the signature of snd_soc_dapm_widgets_new to take an pointer to a snd_soc_dapm_context instead of a snd_soc_codec. The call to snd_soc_dapm_widgets_new in jz4740_codec_dev_probe was not updated to reflect this change, which results in a compiletime warning and a runtime OOPS. Since the core code calls snd_soc_dapm_widgets_new after the codec has been registered it can be dropped here. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02ASoC: Fix output PGA enabling in wm_hubs CODECsMark Brown
commit 39cca168bdfaef9d0c496ec27f292445d6184946 upstream. The output PGA was not being powered up in headphone and speaker paths, removing the ability to offer volume control and mute with the output PGA. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14ASoC: Fix CODEC device name for CorgiMark Brown
commit 326b9bdc2a0e4d556a0f444085dca103bcd505de upstream. Got typoed in the multi-component changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14ASoC: imx: fix burstsize for DMAWolfram Sang
commit e1bb31b444668bc957c337d33803db7cb3330745 upstream. SSI counts in words, the DMA engine in bytes. (Wrong) factor got removed in bf974a0 (ASoC i.MX: switch to new DMA api). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14ASoC: imx: set watermarks for mx2-dmaWolfram Sang
commit 2c4cf17a52f04fbe929977252d5b8ab81d2c6e9b upstream. They got accidently removed by f0fba2a (ASoC: multi-component - ASoC Multi-Component Support). Reintroduce them and get rid of the superfluous defines because the fiq-driver has its own hardcoded values. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-27ASoC: mini2440: Fix uda134x codec problem.Marek Belisko
commit a110f4ef810ee29d810876df725f41d66629733e upstream. ASoC audio for mini2440 platform in current kenrel doesn't work. First problem is samsung_asoc_dma device is missing in initialization. Next problem is with codec. Codec is initialized but never probed because no platform_device exist for codec driver. It leads to errors during codec binding to asoc dai. Next problem was platform data which was passed from board to asoc main driver but not passed to codec when called codec_soc_probe(). Following patch should fix issues. But not sure if in correct way. Please review. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23ASoC: PXA: Z2: Fix codec pin nameVasily Khoruzhick
commit 64c25a92e865f06ad8782fbdaa1e2a97d50acf73 upstream. MONO was renamed to MONO1. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-10Merge branch 'for-2.6.38' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-03-09ASoC: Ensure WM8958 gets all WM8994 late revision widgetsMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-09ASoC: Fix typo in late revision WM8994 DAC2R nameMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-09ASoC: Use the correct DAPM context when cleaning up final widget setMark Brown
Now we've got multi-component we need to make sure that the DAPM context (and hence register I/O context) we use to apply the pending updates at the end of a DAPM sequence is the one we were processing rather than the one that was used to initate the state change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-09ASoC: Fix broken bitfield definitions in WM8978Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-03-09ASoC: AM3517: Update codec name after multi-component updateAbhilash K V
The i2c client device name (".2-001a" in this case, including the separator period) for the AIC23 codec on the TI AM3517-EVM was appended to the codec_name member of am3517evm_dai to resolve the names mismatch happening in soc_bind_dai_link(), due to which the card was not getting registered. Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-01ASoC: WM8994: Ensure late enable events are processed for the ADCsDimitris Papastamos
Ensure that the ADCs are provided with a clock as the previous patch "ASoC: WM8994: Improve playback robustness" did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-01ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionalyDimitris Papastamos
Since we began using the late clock disable functionality, ensure that we don't disable the clock if any of the ADC or DAC paths are still enabled. This happens when we have simultaneous playback and recording. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-01ASoC: Fix WM9081 platform data initialisationMark Brown
It went AWOL in the multi-component conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-25eukrea-tlv320: fix platform_nameEric Bénard
commit f0fba2ad1b6b53d5360125c41953b7afcd6deff0 included a mistake on the name of the platform in the snd_soc_dai_link structure. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-25ASoC: correct pxa AC97 DAI namesDmitry Eremin-Solenikov
Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-22ASoC: Hook wm_hubs micbiases up to CLK_SYSMark Brown
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Correct definition of WM8903_VMID_RES_5KMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Fix WM8958 default microphone detection argument orderingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13ASoC: Ensure supplies are maintained for force enabled widgetsMark Brown
If a widget has been force enabled then not only do we need to keep the widget itself enabled, we also need to keep any supplies the widget requires enabled. The user could force all the individual widgets on but this requires too much knowledge of device internals. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-13ASoC: WM8994: Improve playback robustnessDimitris Papastamos
On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8994: Improve robustness in some use casesDimitris Papastamos
Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-13ASoC: WM8903: Fix mic detection enable logicStephen Warren
The mic detection HW should be enabled when either mic or short detection is required, not when only both are required. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-11ASoC: CX20442: fix wrong reg_cache_default contentJanusz Krzysztofik
Content of the CX20442's snd_soc_codec_driver.reg_cache_default pointed area, introduced with my recent NULL pointer dereferece fix (commit f019ee5feb344ff0b22b58df4568676295aae14f), occured wrong after further testing, more thorough than just booting successfully. There are two problems with it: 1) It should read (1 << CX20442_TELOUT) | (1 << CX20442_MIC), not CX20442_TELOUT | CX20442_MIC. 2) While correctly matching actual codec hardware state on boot when fixed per 1), a few more code modifications would still be required to reflect that state not only into register cache, but also force them into DAPM pins state, otherwise an inconsitency occures which may prevent further codec state changes from being applied correctly. As a result, the phone stops ringing after reboot, until someone picks up the handset for the first time. Revert that reg_cache_default content to a working, previous de facto default value of 0, in hope this change can still be accepted as an rc cycle fix. Created and tested against linux-2.6.38-rc4 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Sync initial widget state with hardwareMark Brown
ASoC generally uses the register defaults for everything, but in some cases the hardware will default to enabling some of the DAPM widgets (clocks for example). Ensure that DAPM knows about the actual widget state at initialisation by reading the enable bits after instantiating the widgets so they don't get left enabled needlessly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-03ASoC: Improve WM8994 digital power sequencingMark Brown
On WM8994 revision D and earlier ensure optimal sequencing with simultaneous usage of AIF1 and AIF2 by tying the signals together so if paths through both are connected the streams are started simultaneously. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03ASoC: Create an AIF1ADCDAT signal widget to match AIF2Mark Brown
Due to the different routing for AIF1 and AIF2 we weren't using a single widget to represent the ADCDAT signal. For consistency add one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-02-03asoc: davinci: da830/omap-l137: correct cpu_dai_nameVaibhav Bedia
McASP1 is used on the DA830/OMAP-L137 platform for the codec. This is different from the DA850/OMAP-L138 platform which uses McASP0. This is fixed by adding a new snd_soc_dai_link struct. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-02ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()Janusz Krzysztofik
The .card member of the snd_soc_pcm_runtime structure pointed to by the snd_soc_dai_link.init() argument used to be initialized before the function being called. This has changed, probably unintentionally, after recent refactorings. Since the function implementations are free to make use of this pointer, move its assignment back before the function is called to avoid NULL pointer dereferences. Created and tested on Amstrad Delta againts linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01ASoC: CX20442: fix NULL pointer dereferenceJanusz Krzysztofik
The CX20442 codec driver never provided the snd_soc_codec_driver's .reg_cache_default member. With the latest ASoC framework changes, it seems to be referred unconditionally, resulting in a NULL pointer dereference if missing. Provide it. Created and tested on Amstrad Delta against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01ASoC: Amstrad Delta: fix const related build errorJanusz Krzysztofik
The Amstrad Delta ASoC driver used to override the digital_mute() callback, expected to be not provided by the on-board CX20442 CODEC driver, with its own implementation. While this is still posssible when substituting the whole empty snd_soc_dai_driver.ops member (the CX20442 case), replacing snd_soc_dai_ops.digital_mute only is no longer correct after the snd_soc_dai_driver.ops member has been constified, and results in build error. Drop this actually not used code path in hope the CX20442 driver never provides its own snd_soc_dai_ops structure. Created and tested against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-28ASoC: Fix mask/val_mask confusion snd_soc_dapm_put_volsw()Stephen Warren
snd_soc_dapm_put_volsw() has variables for both the unshifted and shifted mask for updates commit 97404f (ASoC: Do DAPM control updates in the middle of DAPM sequences) got confused between the two of these. Since there's no need to keep a copy of the unshifted mask fix this and simplify the code by using only one mask variable. [Completely rewrote the changelog to describe the issue -- broonie.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-28ASoC: DaVinci: fix kernel panic due to uninitialized platform_dataManjunathappa, Prakash
This patch fixes the Kernel panic issue on accessing davinci_vc in cq93vc_probe function. struct davinci_vc is part of platform device's private driver data(codec->dev->p->driver_data) and this is populated by DaVinci Voice Codec MFD driver. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: Fix module refcount for auxiliary devicesJarkko Nikula
Commit f6c2ed5 "ASoC: Fix the device references to codec and platform drivers" moved codec driver refcount increments from soc_bind_dai_link into soc_probe_codec. However, the commit didn't remove try_module_get from soc_probe_aux_dev so the auxiliary device reference counts are incremented twice as the soc_probe_codec is called from soc_probe_aux_dev too. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-25ASoC: correct link specifications for corgi, poodle and spitzDmitry Eremin-Solenikov
ASoC DAI link descriptions for Corgi, Poodle and Spitz platforms contained incorrect names for cpu_dai and codec, which effectievly disabled sound on theese platforms. Fix that errors. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-25ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2sLars-Peter Clausen
During the multi-component patch the s3c24xx i2s driver was renamed from "s3c24xx-i2s" to "s3c24xx-iis", while the sound board drivers were not updated to reflect this change as well. As a result there is no match between the dai_link and the i2s driver and no sound card is instantiated. This patch fixes the problem by updating the sound board drivers to use "s3c24xx-iis" for the cpu_dai_name. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-25ASoC: Fix codec device id format used by some dai_linksLars-Peter Clausen
The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-21ASoC: Handle low measured DC offsets for wm_hubs devicesMark Brown
The DC servo codes are actually signed numbers so need to be treated as such. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-01-21ASoC: da8xx/omap-l1xx: match codec_name with i2c idsRajashekhara, Sudhakar
The codec_name entry for da8xx evm in sound/soc/davinci/davinci-evm.c is not matching with the i2c ids in the board file. Without this fix the soundcard does not get detected on da850/omap-l138/am18x evm. Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Tested-by: Dan Sharon <dansharon@nanometrics.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org (for 2.6.37)
2011-01-19ASoC: WM8994: fix wrong value in tristate functionQiao Zhou
fix wrong value in wm8994_set_tristate func. when updating reg bits, it should use "value", not "reg". Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-19ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()Dimitris Papastamos
In the wm8995_set_tristate() function when updating the register bits use the value and not the register index as the value argument. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-19Merge branch 'for-2.6.38' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.38
2011-01-18ASoC: PXA: Fix codec address on Zipit Z2Vasily Khoruzhick
WM8750 address is 0x1b, not 0x1a. Without this fix ALSA detects no sound cards on Zipit Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: PXA: Fix jack detection on Zipit Z2Vasily Khoruzhick
Fix jack detection on Zipit Z2, otherwise it disables headphones output when jack is connected Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: Blackfin: fix DAI/SPORT config dependency issuesBarry Song
While I2S/TDM/AC97 DAI is built-in, others are compiled as modules, SND_BF5XX_SOC_SPORT will be module, then DAI can't get some symbols. Except that, SND_BF5XX_AC97 depends on SND_BF5XX_SOC_AC97 too. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: Blackfin TDM: use external frame syncsBarry Song
We don't want to use internal frame syncs otherwise we sometimes get out of sync, so don't enable them when setting up the SPORT. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: Blackfin AC97: fix build error after multi-component updateMike Frysinger
We need to tweak how we query the active capture/playback state after the recent overhauls of common code. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-08 13:10:42 +0000