aboutsummaryrefslogtreecommitdiff
path: root/kernel/irq
AgeCommit message (Collapse)Author
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-09-11Merge branch 'irq-threaded-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Do not mask oneshot edge type interrupts genirq: Support nested threaded irq handling genirq: Add buslock support genirq: Add oneshot support
2009-08-29irq: Make sure irq_desc for legacy irq get correct node settingYinghai Lu
when there is no ram on node 0. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <4A95C32D.5040605@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-27genirq: Do not mask oneshot edge type interruptsThomas Gleixner
Masking oneshot edge type interrupts is wrong as we might lose an interrupt which is issued when the threaded handler is handling the device. We can keep the irq unmasked safely as with edge type interrupts there is no danger of interrupt floods. If the threaded handler has not yet finished then IRQTF_RUNTHREAD is set which will keep the handler thread active. Debugged and verified in preempt-rt. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-25Merge commit 'v2.6.31-rc7' into irq/coreIngo Molnar
Merge reason: move from an -rc2 base to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18genirq: Wake up irq thread after action has been installedThomas Gleixner
The wake_up_process() of the new irq thread in __setup_irq() is too early as the irqaction is not yet fully initialized especially action->irq is not yet set. The interrupt thread might dereference the wrong irq descriptor. Move the wakeup after the action is installed and action->irq has been set. Reported-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Buesch <mb@bu3sch.de>
2009-08-17genirq: Support nested threaded irq handlingThomas Gleixner
Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-17genirq: Add buslock supportThomas Gleixner
Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-17genirq: Add oneshot supportThomas Gleixner
For threaded interrupt handlers we expect the hard interrupt handler part to mask the interrupt on the originating device. The interrupt line itself is reenabled after the hard interrupt handler has executed. This requires access to the originating device from hard interrupt context which is not always possible. There are devices which can only be accessed via a bus (i2c, spi, ...). The bus access requires thread context. For such devices we need to keep the interrupt line masked until the threaded handler has executed. Add a new flag IRQF_ONESHOT which allows drivers to request that the interrupt is not unmasked after the hard interrupt context handler has been executed and the thread has been woken. The interrupt line is unmasked after the thread handler function has been executed. Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms. For oneshot interrupts the primary handler simply returns IRQ_WAKE_THREAD and does nothing else. A generic implementation irq_default_primary_handler() is provided to avoid useless copies all over the place. It is automatically installed when request_threaded_irq() is called with handler=NULL and thread_fn!=NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13genirq: prevent wakeup of freed irq threadLinus Torvalds
free_irq() can remove an irqaction while the corresponding interrupt is in progress, but free_irq() sets action->thread to NULL unconditionally, which might lead to a NULL pointer dereference in handle_IRQ_event() when the hard interrupt context tries to wake up the handler thread. Prevent this by moving the thread stop after synchronize_irq(). No need to set action->thread to NULL either as action is going to be freed anyway. This fixes a boot crash reported against preempt-rt which uses the mainline irq threads code to implement full irq threading. [ tglx: removed local irqthread variable ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-09irq: Remove superfluous NULL pointer check in check_irq_resend()Bartlomiej Zolnierkiewicz
This takes care of the following entry from Dan's list: kernel/irq/resend.c +73 check_irq_resend(17) warning: variable derefenced before check 'desc->chip' Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eugene Teo <eteo@redhat.com> Cc: Julia Lawall <julia@diku.dk> LKML-Reference: <200908062146.03638.bzolnier@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-08x86/irq: Fix move_irq_desc() for nodes without ramYinghai Lu
Don't move it if target node is -1. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4A785B5D.4070702@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04irq: Clean up by removing irqfixup MODULE_PARM_DESC()Jiri Slaby
It's wrong (the parm takes no arguments) and compile-time wiped away anyway (due to !MODULE). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> LKML-Reference: <1248991326-26267-1-git-send-email-jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22genirq: Fix UP compile failure caused by irq_thread_check_affinityBruno Premont
Since genirq: Delegate irq affinity setting to the irq thread (591d2fb02ea80472d846c0b8507007806bdd69cc) compilation with CONFIG_SMP=n fails with following error: /usr/src/linux-2.6/kernel/irq/manage.c: In function 'irq_thread_check_affinity': /usr/src/linux-2.6/kernel/irq/manage.c:475: error: 'struct irq_desc' has no member named 'affinity' make[4]: *** [kernel/irq/manage.o] Error 1 That commit adds a new function irq_thread_check_affinity() which uses struct irq_desc.affinity which is only available for CONFIG_SMP=y. Move that function under #ifdef CONFIG_SMP. [ tglx@brownpaperbag: compile and boot tested on UP and SMP ] Signed-off-by: Bruno Premont <bonbons@linux-vserver.org> LKML-Reference: <20090722222232.2eb3e1c4@neptune.home> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-21genirq: Delegate irq affinity setting to the irq threadThomas Gleixner
irq_set_thread_affinity() calls set_cpus_allowed_ptr() which might sleep, but irq_set_thread_affinity() is called with desc->lock held and can be called from hard interrupt context as well. The code has another bug as it does not hold a ref on the task struct as required by set_cpus_allowed_ptr(). Just set the IRQTF_AFFINITY bit in action->thread_flags. The next time the thread runs it migrates itself. Solves all of the above problems nicely. Add kerneldoc to irq_set_thread_affinity() while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission>
2009-07-05genirq: Fix comment describing suspend_device_irqs()Rafael J. Wysocki
The kerneldoc comment describing suspend_device_irqs() is currently misleading, because generally the function doesn't really disable interrupt lines at the chip level. Replace it with a more accurate one. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <200907050022.35117.rjw@sisk.pl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-06-20Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq, irq.h: Fix kernel-doc warnings genirq: fix comment to say IRQ_WAKE_THREAD
2009-06-12irq: slab alloc for default irq_affinityYinghai Lu
Ingo had [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x2b/0x71() [ 0.000000] Hardware name: System Product Name [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 2.6.30-tip-03087-g0bb2618-dirty #52506 [ 0.000000] Call Trace: [ 0.000000] [<81032588>] warn_slowpath_common+0x60/0x90 [ 0.000000] [<810325c5>] warn_slowpath_null+0xd/0x10 [ 0.000000] [<819d1bc0>] alloc_arch_preferred_bootmem+0x2b/0x71 [ 0.000000] [<819d1c31>] ___alloc_bootmem_nopanic+0x2b/0x9a [ 0.000000] [<81050a0a>] ? lock_release+0xac/0xb2 [ 0.000000] [<819d1d4c>] ___alloc_bootmem+0xe/0x2d [ 0.000000] [<819d1e9f>] __alloc_bootmem+0xa/0xc [ 0.000000] [<819d7c63>] alloc_bootmem_cpumask_var+0x21/0x26 [ 0.000000] [<819d0cc8>] early_irq_init+0x15/0x10d [ 0.000000] [<819bb75a>] start_kernel+0x167/0x326 [ 0.000000] [<819bb06b>] __init_begin+0x6b/0x70 [ 0.000000] ---[ end trace 4eaa2a86a8e2da23 ]--- [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] CPU 0 irqstacks, hard=821e6000 soft=821e7000 we need to update init_irq_default_affinity Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11irq: use kcalloc() instead of the bootmem allocatorPekka Enberg
Fixes the following problem: [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e() [ 0.000000] Hardware name: To Be Filled By O.E.M. [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e [ 0.000000] [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb [ 0.000000] [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d [ 0.000000] [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e [ 0.000000] [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec [ 0.000000] [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61 [ 0.000000] [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34 [ 0.000000] [<ffffffff823f757c>] early_irq_init+0x6d/0x118 [ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71 [ 0.000000] [<ffffffff823e0cf7>] start_kernel+0x192/0x394 [ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71 [ 0.000000] [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf [ 0.000000] [<ffffffff823e0000>] ? __init_begin+0x0/0x140 [ 0.000000] [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2002.510 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11irq/cpumask: make memoryless node zero happyYinghai Lu
Don't hardcode to node zero for early boot IRQ setup memory allocations. [ penberg@cs.helsinki.fi: minor cleanups ] Cc: Ingo Molnar <mingo@elte.hu> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-10Merge branch 'tracing-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits) Revert "x86, bts: reenable ptrace branch trace support" tracing: do not translate event helper macros in print format ftrace/documentation: fix typo in function grapher name tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK tracing: add protection around module events unload tracing: add trace_seq_vprint interface tracing: fix the block trace points print size tracing/events: convert block trace points to TRACE_EVENT() ring-buffer: fix ret in rb_add_time_stamp ring-buffer: pass in lockdep class key for reader_lock tracing: add annotation to what type of stack trace is recorded tracing: fix multiple use of __print_flags and __print_symbolic tracing/events: fix output format of user stack tracing/events: fix output format of kernel stack tracing/trace_stack: fix the number of entries in the header ring-buffer: discard timestamps that are at the start of the buffer ring-buffer: try to discard unneeded timestamps ring-buffer: fix bug in ring_buffer_discard_commit ftrace: do not profile functions when disabled tracing: make trace pipe recognize latency format flag ...
2009-05-23sparseirq: Allow early irq_desc allocationPaul Mundt
Presently non-legacy IRQs have their irq_desc allocated with kzalloc_node(). This assumes that all callers of irq_to_desc_node_alloc() will be sufficiently late in the boot process that kmalloc is available. While porting sparseirq support to sh this blew up immediately, as at the time that we register the CPU's interrupt vector map only bootmem is available. Check slab_is_available() to work out which path to use. [ Impact: fix SH early boot crash with sparseirq enabled ] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> LKML-Reference: <20090522014008.GA2806@linux-sh.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12genirq: fix comment to say IRQ_WAKE_THREADSteven Rostedt
Trying to implement a driver to use threaded irqs, I was confused when the return value to use that was described in the comment above request_threaded_irq was not defined. Turns out that the enum is IRQ_WAKE_THREAD where as the comment said IRQ_THREAD_WAKE. [Impact: do not confuse developers with wrong comments ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <alpine.DEB.2.00.0905121431020.13338@gandalf.stny.rr.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-12Merge branch 'x86/apic' into irq/numaIngo Molnar
Merge reason: both topics modify the APIC code but were able to do it in parallel so far. An upcoming patch generates a conflict so merge them to avoid the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07Merge branch 'linus' into tracing/coreIngo Molnar
Merge reason: tracing/core was on a .30-rc1 base and was missing out on on a handful of tracing fixes present in .30-rc5-almost. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01x86/irq: use move_irq_desc() in create_irq_nr()Yinghai Lu
move_irq_desc() will try to move irq_desc to the home node if the allocated one is not correct, in create_irq_nr(). ( This can happen on devices that are on different nodes that are using MSI, when drivers are loaded and unloaded randomly. ) v2: fix non-smp build v3: add NUMA_IRQ_DESC to eliminate #ifdefs [ Impact: improve irq descriptor locality on NUMA systems ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F95EAE.2050903@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01Revert "genirq: assert that irq handlers are indeed running in hardirq context"Thomas Gleixner
This reverts commit 044d408409cc4e1bc75c886e27ca85c270db104c. The commit added a warning when handle_IRQ_event() is called outside of hard interrupt context. This breaks the generic tasklet based interrupt resend mechanism which is used when the hardware has no way to retrigger the interrupt. So we get a warning for a use case which is correct and worked for years. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-29tracing: fix build failure on s390Heiko Carstens
"tracing: create automated trace defines" causes this compile error on s390, as reported by Sachin Sant against linux-next: kernel/built-in.o: In function `__do_softirq': (.text+0x1c680): undefined reference to `__tracepoint_softirq_entry' This happens because the definitions of the softirq tracepoints were moved from kernel/softirq.c to kernel/irq/handle.c. Since s390 doesn't support generic hardirqs handle.c doesn't get compiled and the definitions are missing. So move the tracepoints to softirq.c again. [ Impact: fix build failure on s390 ] Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com LKML-Reference: <20090429135139.5fac79b8@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28x86/irq: change irq_desc_alloc() to take node instead of cpuYinghai Lu
This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28irq: only update affinity if ->set_affinity() is sucessfullYinghai Lu
irq_set_affinity() and move_masked_irq() try to assign affinity before calling chip set_affinity(). Some archs are assigning it in ->set_affinity() again. We do something like: cpumask_cpy(desc->affinity, mask); desc->chip->set_affinity(mask); But in the failure path, affinity should not be touched - otherwise we'll end up with a different affinity mask despite the failure to migrate the IRQ. So try to update the afffinity only if set_affinity returns with 0. Also call irq_set_thread_affinity accordingly. v2: update after "irq, x86: Remove IRQ_DISABLED check in process context IRQ move" v3: according to Ingo, change set_affinity() in irq_chip should return int. v4: update comments by removing moving irq_desc code. [ Impact: fix /proc/irq/*/smp_affinity setting corner case bug ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F65509.60307@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESCYinghai Lu
The original feature of migrating irq_desc dynamic was too fragile and was causing problems: it caused crashes on systems with lots of cards with MSI-X when user-space irq-balancer was enabled. We now have new patches that create irq_desc according to device numa node. This patch removes the leftover bits of the dynamic balancer. [ Impact: remove dead code ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F654AF.8000808@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28irq, cpumask: correct CPUMASKS_OFFSTACK typo and fix falloutYinghai Lu
CPUMASKS_OFFSTACK is not defined anywhere (it is CPUMASK_OFFSTACK). It is a typo and init_allocate_desc_masks() is called before it set affinity to all cpus... Split init_alloc_desc_masks() into all_desc_masks() and init_desc_masks(). Also use CPUMASK_OFFSTACK in alloc_desc_masks(). [ Impact: fix smp_affinity copying/setup when moving irq_desc between CPUs ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <49F6546E.3040406@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-14tracing/events: move trace point headers into include/trace/eventsSteven Rostedt
Impact: clean up Create a sub directory in include/trace called events to keep the trace point headers in their own separate directory. Only headers that declare trace points should be defined in this directory. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14tracing: create automated trace definesSteven Rostedt
This patch lowers the number of places a developer must modify to add new tracepoints. The current method to add a new tracepoint into an existing system is to write the trace point macro in the trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or DECLARE_TRACE, then they must add the same named item into the C file with the macro DEFINE_TRACE(name) and then add the trace point. This change cuts out the needing to add the DEFINE_TRACE(name). Every file that uses the tracepoint must still include the trace/<type>.h file, but the one C file must also add a define before the including of that file. #define CREATE_TRACE_POINTS #include <trace/mytrace.h> This will cause the trace/mytrace.h file to also produce the C code necessary to implement the trace point. Note, if more than one trace/<type>.h is used to create the C code it is best to list them all together. #define CREATE_TRACE_POINTS #include <trace/foo.h> #include <trace/bar.h> #include <trace/fido.h> Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with the cleaner solution of the define above the includes over my first design to have the C code include a "special" header. This patch converts sched, irq and lockdep and skb to use this new method. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14x86, irq: Remove IRQ_DISABLED check in process context IRQ movePallipadi, Venkatesh
As discussed in the thread here: http://marc.info/?l=linux-kernel&m=123964468521142&w=2 Eric W. Biederman observed: > It looks like some additional bugs have slipped in since last I looked. > > set_irq_affinity does this: > ifdef CONFIG_GENERIC_PENDING_IRQ > if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { > cpumask_copy(desc->affinity, cpumask); > desc->chip->set_affinity(irq, cpumask); > } else { > desc->status |= IRQ_MOVE_PENDING; > cpumask_copy(desc->pending_mask, cpumask); > } > #else > > That IRQ_DISABLED case is a software state and as such it has nothing to > do with how safe it is to move an irq in process context. [...] > > The only reason we migrate MSIs in interrupt context today is that there > wasn't infrastructure for support migration both in interrupt context > and outside of it. Yes. The idea here was to force the MSI migration to happen in process context. One of the patches in the series did disable_irq(dev->irq); irq_set_affinity(dev->irq, cpumask_of(dev->cpu)); enable_irq(dev->irq); with the above patch adding irq/manage code check for interrupt disabled and moving the interrupt in process context. IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there when we eventually submitted the patch upstream. But, looks like I did a blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code. Below patch fixes this. i.e., revert commit 932775a4ab622e3c99bd59f14cc and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity in generic code as set_affinity routines are doing it internally. Reported-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Li Shaohua" <shaohua.li@intel.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: "lcm@us.ibm.com" <lcm@us.ibm.com> Cc: suresh.b.siddha@intel.com LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and ↵Linus Torvalds
'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: fix wrong format string iter for printk futex: comment requeue key reference semantics * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: fix cpumask memory leak on offstack cpumask kernels * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF) posix-timers: fix RLIMIT_CPU && fork() timers: add missing kernel-doc
2009-04-06Merge branch 'linus' into irq/threadedIngo Molnar
Conflicts: include/linux/irq.h kernel/irq/handle.c
2009-04-03irq: fix cpumask memory leak on offstack cpumask kernelsYinghai Lu
Need to free the old cpumask for affinity and pending_mask. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49D18FF0.50707@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar
Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
2009-03-30PM: Introduce functions for suspending and resuming device interruptsRafael J. Wysocki
Introduce helper functions allowing us to prevent device drivers from getting any interrupts (without disabling interrupts on the CPU) during suspend (or hibernation) and to make them start to receive interrupts again during the subsequent resume. These functions make it possible to keep timer interrupts enabled while the "late" suspend and "early" resume callbacks provided by device drivers are being executed. In turn, this allows device drivers' "late" suspend and "early" resume callbacks to sleep, execute ACPI callbacks etc. The functions introduced here will be used to rework the handling of interrupts during suspend (hibernation) and resume. Namely, interrupts will only be disabled on the CPU right before suspending sysdevs, while device drivers will be prevented from receiving interrupts, with the help of the new helper function, before their "late" suspend callbacks run (and analogously during resume). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24genirq: threaded irq handlers review fixupsThomas Gleixner
Delta patch to address the review comments. - Implement warning when IRQ_WAKE_THREAD is requested and no thread handler installed - coding style fixes Pointed-out-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24genirq: add support for threaded interrupts to devresArjan van de Ven
Some devices use devres_request_irq() for to install their interrupt handler. Add support for threaded interrupts to devres as well. [tglx - simplified and adapted to latest threadirq version] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24genirq: add threaded interrupt handler supportThomas Gleixner
Add support for threaded interrupt handlers: A device driver can request that its main interrupt handler runs in a thread. To achive this the device driver requests the interrupt with request_threaded_irq() and provides additionally to the handler a thread function. The handler function is called in hard interrupt context and needs to check whether the interrupt originated from the device. If the interrupt originated from the device then the handler can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is returned when no further action is required. IRQ_WAKE_THREAD causes the genirq code to invoke the threaded (main) handler. When IRQ_WAKE_THREAD is returned handler must have disabled the interrupt on the device level. This is mandatory for shared interrupt handlers, but we need to do it as well for obscure x86 hardware where disabling an interrupt on the IO_APIC level redirects the interrupt to the legacy PIC interrupt lines. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2009-03-23Merge branch 'cpus4096' into irq/threadedThomas Gleixner
Conflicts: arch/parisc/kernel/irq.c kernel/irq/handle.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-16Merge branches 'irq/genirq' and 'linus' into irq/coreIngo Molnar
2009-03-13genirq: deprecate __do_IRQThomas Gleixner
Two years migration time is enough. Remove the compability cruft. Add the deprecated warning in kernel/irq/handle.c because marking __do_IRQ itself is way too noisy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-13genirq: use kzalloc instead of explicit zero initializationThomas Gleixner
Impact: simplification Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2009-03-13genirq: remove redundant if conditionThomas Gleixner
Impact: cleanup The code is only compiled if CONFIG_GENERIC_HARDIRQS=y so another check for this define in the code is redundant. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-12irq: export remove_irq() and setup_irq() symbolsMagnus Damm
Export the setup_irq() and remove_irq() symbols. I'd like to export these functions since I have timer code that needs to use setup_irq() early on (too early for request_irq()), and the same code can also be compiled as a module. Signed-off-by: Magnus Damm <damm@igel.co.jp> LKML-Reference: <20090312120559.2926.82371.sendpatchset@rx1.opensource.se> [ changed to _GPL as these are special APIs deep inside the irq layer. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>