aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2011-03-04ARM: mach-shmobile: mackerel: modify LCDC clock divider valueKuninori Morimoto
mackerel WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04ARM: mach-shmobile: ap4evb: modify LCDC clock divider valueKuninori Morimoto
ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15ARM: mach-shmobile: mackerel: fixup memory initialize for zbootKuninori Morimoto
Current makerel had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15ARM: mach-shmobile: ap4evb: fixup memory initialize for zbootKuninori Morimoto
Current ap4evb had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-01ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocksMagnus Damm
Update the sh73a0 CPGA to support clocks for CEU and MIPI-CSI. This includes MSTP bits for CSI and CEU and div6 clkdev bindings for VCK1-3. Fix the order of the MSTP32 entries in the clkdev table while at it. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-01ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fixMagnus Damm
Add a 100 ms delay after the MIPI-DSI panel reset to fix issue related to the LCD panel not starting properly at boot up time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform dataMagnus Damm
Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bitMagnus Damm
PLL1 and PLL2 in the sh73a0 CPGA has a CFG bit that must be taken into account to correctly calculate the frequency. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-19ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settingsSimon Horman
* Pins 2 and 4 of switch 33 are documented as don't care on the PCB, my testing seems to confirm this. * I have been unable to do anything sensible with S1 set to on. Am I missing something with regards to MMC1? * Clarify which driver is needed for each switch setting. * Should the AP4 board code be updated to allow the SHDI driver to access SHDI1 as the mackerel code does? Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTPMagnus Damm
Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3Magnus Damm
Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: remove sh7367 on-chip set_irq_type()Magnus Damm
set_irq_type() should only be used for external IRQ pins, so update the G3EVM board code to remove low level request. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt updateMagnus Damm
Enable the MFIS2 interrupt source in the INTCS interrupt controller included in the sh7372 processor. The priority field is constantly enabled to let the interrupt through to both the ARM side and the SH side. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: ag5evm: Add IrDA supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rateKuninori Morimoto
This patch fixup 421b446abeec55bed1251fab80cb5c12be58b773 - Care clk->rate - Don't over write PLLC2 enable bit Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-14ARM: mach-shmobile: ag5evm requires GPIOLIBYoshii Takashi
Because ag5evm board setup code uses gpio functions, ARCH_REQUIRE_GPIOLIB should be set in Kconfig. Otherwise, the first build with defconfig fails. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-14ARM: mach-shmobile: fix cpu_base of gic_init() on sh73a0Yoshii Takashi
The latest rmobile-latest doesn't run on ag5evm because of a small mistake on initialization. Though, I don't have any idea to write them smart. anyway, On sh73a0, GIC cpu_base is 0xf0000100 but 0xf0001000. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'rmobile-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: Kill off unused !gpio_is_valid() case ARM: mach-shmobile: sh7372 Enable SDIO IRQs for Mackerel ARM: mach-shmobile: sh7377 Enable SDIO IRQs ARM: mach-shmobile: sh7367 Enable SDIO IRQs ARM: mach-shmobile: sh7372 Enable SDIO IRQs ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support ARM: mach-shmobile: ap4eb: SCIF port for earlyprintk when using zboot ARM: mach-shmobile: mackerel: SCIF port for earlyprintk when using zboot ARM: mach-shmobile: mackerel: Add support get_cd in CN23
2011-01-13Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (31 commits) sh: Add support for AP-SH4AD-0A board. sh: Add support for AP-SH4A-3A board. sh: Add a new mach type for alpha project boards. serial: sh-sci: build fixes. sh: sh7372 SH4AL-DSP probe support sh: sh7366 Enable SDIO IRQs sh: sh7343 Enable SDIO IRQs sh: mach-ecovec24: enable runtime PM for SDHI sh: sh7723 / ap325rxa enable SDIO IRQs sh: sh7722 Enable SDIO IRQs sh: sh7724 Enable SDIO IRQs sh: Fix up legacy PTEA space attribute mapping. sh: Stub out legacy PCC pgprot encoding for X2 TLBs. sh: constify prefetch pointers. sh: Add a machvec callback for early memblock reservations. sh: update sh7757lcr_defconfig sh: add PVR probing for SH7757 3rd cut sh: Use device_initcall() instead of __initcall() sh: intc - convert board specific landisk code sh: Move init_landisk_IRQ to header file ...
2011-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits) ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO ALSA: oxygen: fix Xonar DG input ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low ALSA: hda - Fix missing EAPD for Acer 4930G ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs. ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser ALSA: hda - Don't refer ELD when unplugged ASoC: tpa6130a2: Fix compiler warning ASoC: tlv320dac33: Add DAPM selection for LOM invert ASoC: DMIC codec: Adding a generic DMIC codec ALSA: snd-usb-us122l: Fix missing NULL checks ALSA: snd-usb-us122l: Fix MIDI output ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync() ASoC: Fix section mismatch in wm8995.c ALSA: oxygen: add S/PDIF source selection for Claro cards ALSA: oxygen: fix CD/MIDI for X-Meridian (2G) ASoC: fix migor audio build ALSA: include delay.h for msleep in Xonar DG support ...
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-01-13ARM: mach-shmobile: Kill off unused !gpio_is_valid() caseMagnus Damm
The Card Detect GPIOs used on AP4EVB and Mackerel are alwayws valid, so kill off the unused !gpio_is_valid() case. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework Conflicts: arch/sh/kernel/cpu/sh2/setup-sh7619.c arch/sh/kernel/cpu/sh2a/setup-mxg.c arch/sh/kernel/cpu/sh2a/setup-sh7201.c arch/sh/kernel/cpu/sh2a/setup-sh7203.c arch/sh/kernel/cpu/sh2a/setup-sh7206.c arch/sh/kernel/cpu/sh3/setup-sh7705.c arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh4-202.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4/setup-sh7760.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7780.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c arch/sh/kernel/cpu/sh4a/setup-shx3.c arch/sh/kernel/cpu/sh5/setup-sh5.c drivers/serial/sh-sci.c drivers/serial/sh-sci.h include/linux/serial_sci.h
2011-01-12Merge branch 'rmobile/sdio' into rmobile-latestPaul Mundt
2011-01-12ARM: mach-shmobile: sh7372 Enable SDIO IRQs for MackerelMagnus Damm
Enable SDIO IRQ support for the Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7377 Enable SDIO IRQsMagnus Damm
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7377 aka G4 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. The G4EVM specific SDHI platform data is also updated to flag SDIO capabilities. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7367 Enable SDIO IRQsMagnus Damm
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7367 aka G3 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-12ARM: mach-shmobile: sh7372 Enable SDIO IRQsArnd Hannemann
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure interrupts are handled announce the MMC_CAP_SDIO_IRQ capability on AP4EVB. Tested with a b43-based SDIO wireless card. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: Add touchscreen ST1232 supportTony SIM
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: ap4eb: SCIF port for earlyprintk when using zbootSimon Horman
Initialise the SCIF serial port to allow earlyprintk output when using zboot. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: SCIF port for earlyprintk when using zbootSimon Horman
Initialise the SCIF serial port to allow earlyprintk output when using zboot. It is based on a very similar patched for AP4EB. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11ARM: mach-shmobile: mackerel: Add support get_cd in CN23Yusuke Goda
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: update for SMP changes.Paul Mundt
There have likewise been some API updates, so we refactor to use the consolidated smp_prepare_cpus(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: update for GIC changes.Paul Mundt
This fixes up the SMP support to use the refactored GIC APIs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Fix up clkdev fallout for SH73A0.Paul Mundt
Use the new linux/clkdev.h to get it building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07Merge branch 'rmobile/smp' into rmobile-latestPaul Mundt
Conflicts: arch/arm/Kconfig arch/arm/mach-shmobile/include/mach/entry-macro-intc.S Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Rely on run-time IRQ handlersMagnus Damm
Remove now unused IRQ demux code. All R-Mobile and SH-Mobile processors should register IRQ demux handlers during run-time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Run-time IRQ handler for GICMagnus Damm
Break-out GIC specific IRQ demux code from the file entry-macro-intc.S and register during run-time. Covers sh73a0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Run-time IRQ handler for INTCAMagnus Damm
Break-out INTC specific IRQ demux code from the file entry-macro-intc.S and register during run-time. Covers sh7367, sh7377 and sh7372. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Use shared GIC entry macrosMagnus Damm
Use the GIC demux code in asm/hardware/entry-macro-gic.S on the R-Mobile / SH-Mobile processors. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: mackerel: Add zboot supportSimon Horman
When CONFIG_ZBOOT_ROM is selected, the resulting zImage file will be small boot loader and may be burned to rom or flash. Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2011-01-06Merge branch 'misc' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2011-01-06Merge branch 'smp' into miscRussell King
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/mm/ioremap.c
2011-01-06ARM: mach-shmobile: mackerel: Add HDMI sound supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06ARM: mach-shmobile: mackerel: add HDMI video supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06ARM: mach-shmobile: ap4evb: fixup clk_put timing of fsib_clkKuninori Morimoto
fsib_clk will be used when fdiv_clk failed on fsi_hdmi_set_rate. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and ↵Russell King
'versatile' into devel
2011-01-05Merge branch 'common/fbdev-mipi' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-18 04:14:40 +0000