aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100
AgeCommit message (Collapse)Author
2011-03-16Merge branch 'p2v' into develRussell King
Conflicts: arch/arm/kernel/module.c arch/arm/mach-s5pv210/sleep.S
2011-03-16Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', ↵Russell King
'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel
2011-02-22ARM: pm: convert sa11x0 to generic suspend/resume supportRussell King
Convert sa11x0 to use the generic CPU suspend/resume support, rather than implementing its own version. Tested on Assabet. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6658/1: collie: do actually pass locomo_info to locomo driverDmitry Eremin-Solenikov
locomo_info isn't actually used as a platform_data on collie platform: arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-15Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-15Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: fix missing branch in __error_a ARM: fix /proc/$PID/stack on SMP ARM: Fix build regression on SA11x0, PXA, and H720x targets ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources ARM: fix wrongly patched constants ARM: 6624/1: fix dependency for CONFIG_SMP_ON_UP ARM: 6623/1: Thumb-2: Fix out-of-range offset for Thumb-2 in proc-v7.S ARM: 6622/1: fix dma_unmap_sg() documentation ARM: 6621/1: bitops: remove condition code clobber for CLZ ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMU ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zero ARM: sched_clock: allow init_sched_clock() to be called early ARM: integrator: fix compile warning in cpu.c ARM: 6616/1: Fix ep93xx-fb init/exit annotations ARM: twd: fix display of twd frequency ARM: udelay: prevent math rounding resulting in short udelays
2011-01-15ARM: Fix build regression on SA11x0, PXA, and H720x targetsRussell King
Build errors similar this appeared in todays kautobuild for the above targets: In file included from arch/arm/include/asm/pgtable.h:461, from arch/arm/mach-pxa/generic.c:26: include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young': include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type None of the .c files including asm/pgtable.h with this error is using this header, so simply remove the include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13ARM: sa1100: irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-05Merge branch 'clksrc' into develRussell King
Conflicts: arch/arm/mach-vexpress/v2m.c arch/arm/plat-omap/counter_32k.c arch/arm/plat-versatile/Makefile
2011-01-03ARM: 6607/1: sa1100: Update platform device registrationJochen Friedrich
Replace some magic numbers with constants and add interrupt definitions. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-03ARM: 6606/1: sa1100: Fix platform device registrationJochen Friedrich
Since commit 7a5b4e16c880f8350d255dc188f81622905618c1, simpad devices don't boot anymore, since platform devices are registered too early. Fix by moving the registration from map_io to arch_initcall as done on other sa1100 boards. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: sa1100: convert sched_clock() to use new infrastructureRussell King
Convert sa1100 to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: ensure all sched_clock() implementations are notrace markedRussell King
ftrace requires sched_clock() to be notrace. Ensure that all implementations are so marked. Also make sure that they include linux/sched.h Also ensure OMAP clocksource read functions are marked notrace as they're used for sched_clock() too. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: SA11x0: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-21ARM: 6459/2: sa1100: Add nanoEngine PCI support.Marcelo Roberto Jimenez
This patch adds nanoEngine's PCI support. Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-21ARM: 6458/1: pcmcia: Adds nanoEngine PCMCIA support.Marcelo Roberto Jimenez
This patch adds nanoEngine PCMCIA support, with support for two sockets. In order to have a fully functional pcmcia subsystem in a BSE nanoEngine board you should carefully read this: http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/ Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-21ARM: 6451/1: sa1100: Fix checkpatch.pl issues in ↵Marcelo Roberto Jimenez
arch/arm/mach-sa1100/cpu-sa1110.c. This patch fixes checkpatch.pl issues in arch/arm/mach-sa1100/cpu-sa1110.c. Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-21ARM: 6447/3: sa1100: Put nanoEngine support back in the kernelMarcelo Roberto Jimenez
Adds Bright Star Engineering's nanoEngine board support to the kernel. Also: - Adds the nanoEngine memory chip to arch/arm/mach-sa1100/cpu-sa1110.c (Micron MT48LC8M16A2TG-75). - Increase in the sdram_params->name[] field length to accomodate the name of the memory chip. - Clean up of header content and order of arch/arm/mach-sa1100/cpu-sa1110.c Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-16suspend: constify platform_suspend_opsLionel Debroux
While at it, fix two checkpatch errors. Several non-const struct instances constified by this patch were added after the introduction of platform_suspend_ops in checkpatch.pl's list of "should be const" structs (79404849e90a41ea2109bd0e2f7c7164b0c4ce73). Patch against mainline. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-10ARM: 6450/1: Fix checkpatch.pl issues in arch/arm/mach-sa1100/cpu-sa1100.c.Marcelo Roberto Jimenez
This patch fixes checkpatch.pl issues in arch/arm/mach-sa1100/cpu-sa1100.c. Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27ARM: 6449/1: Fix for compiler warning of uninitialized variable.Marcelo Roberto Jimenez
ARM: mach-sa1100: Fix for compiler warning of uninitialized variable. This is a fix for the compiler warning: 'new_ppcr' may be used uninitialized in this function. Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20arm: return both physical and virtual addresses from addruartJeremy Kerr
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-18Update broken web addresses in arch directory.Justin P. Mattock
The patch below updates broken web addresses in the arch directory. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-06Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/palmt5.c arch/arm/mach-pxa/palmtreo.c
2010-08-05[ARM] pxa: replacing dead SHARPSL_LOCOMO with SHARP_LOCOMOChristoph Egger
SHARP_LOCOMO doesn't exist in Kconfig, therefore replacing all references for it with SHARP_LOCOMO in the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-07-19update email addressPavel Machek
pavel@suse.cz no longer works, replace it with working address. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-16ARM: Remove 'node' argument form arch_adjust_zones()Russell King
Since we no longer support discontigmem, node is always zero, so remove this argument. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16ARM: Remove DISCONTIGMEM supportRussell King
Everything should now be using sparsemem rather than discontigmem, so remove the code supporting discontigmem from ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-24ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanupAndrea Gelmini
arch/arm/mach-sa1100/leds.c:21: ERROR: code indent should use tabs where possible arch/arm/mach-sa1100/leds.c:21: WARNING: please, no space before tabs arch/arm/mach-sa1100/leds.c:22: ERROR: code indent should use tabs where possible arch/arm/mach-sa1100/leds.c:22: WARNING: please, no space before tabs arch/arm/mach-sa1100/leds.c:24: ERROR: code indent should use tabs where possible arch/arm/mach-sa1100/leds.c:24: WARNING: please, no space before tabs Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6076/1: SA1100: add processor check to sa1110-cpufreq driverDmitry Artamonow
Just to make sure that this driver won't run on StrongArm SA1100 when both SA1100 and SA1110 cpufreq drivers are built in (usually in multimachine config). SA1100 driver already has similar check. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6075/1: SA1100: fix wrong CPU type for h3100 and h3600Dmitry Artamonow
They have StrongARM SA1110, not SA1100. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-07platform-drivers: move probe to .devinit.text in arch/armUwe Kleine-König
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.miao@marvell.com> Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02[ARM] sa1111: allow cascaded IRQs to be used by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: allow cascaded IRQ base to be specified by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: remove unused IRQs and avoid unnecessary cascadeEric Miao
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*. IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as IRQ_LOCOMO_KEY. IRQ_LOCOMO_GPIO and the demultiplex handler should really be living somewhere else. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: avoid unnecessary cascaded keyboard IRQEric Miao
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced locomokbd_{open,close} for masking/unmasking of the keyboard IRQ. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] sa1100: remove unreferenced IRQ definitionsEric Miao
These IRQ definitions related to LOCOMO are never referenced anywhere, thus could be safely removed. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-15ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan
Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-22arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_modeUwe Kleine-König
These functions are called with irqs already off. This commit removes the calls to raw_local_irq_save and raw_local_irq_restore on platforms that don't have to use a shared interrupt for their timekeeping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-12-13ARM: fix sa1100 buildRussell King
Fix: arch/arm/mach-sa1100/generic.c:117: error: redefinition of 'cpufreq_get' include/linux/cpufreq.h:299: error: previous definition of 'cpufreq_get' was here cpufreq_get() is used on these platforms to tell drivers what the CPU frequency is, and therefore the bus frequency - which is critical for setting the PCMCIA and LCD timings. Adding ifdefs to these drivers to select cpufreq_get() or some other interface adds confusion. Making these drivers use some other interface for the normal paths and cpufreq stuff for the cpufreq notifier is insane as well. (Why x86 can't provide a version of cpufreq_get() which returns the CPU frequency when CPUFREQ is disabled is beyond me, rather than requiring a dummy zero-returning cpufreq_get(). Especially as they do: unsigned long khz = cpufreq_get(cpu); if (!khz) khz = tsc_khz; In other words, if CPUFREQ is disabled, get it from tsc_khz - why not provide a dummy cpufreq_get() which returns tsc_khz?) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 00:05:41 +0000