diff options
Diffstat (limited to 'drivers/target/target_core_pr.c')
| -rw-r--r-- | drivers/target/target_core_pr.c | 4252 |
1 files changed, 4252 insertions, 0 deletions
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c new file mode 100644 index 00000000000..2521f75362c --- /dev/null +++ b/drivers/target/target_core_pr.c @@ -0,0 +1,4252 @@ +/******************************************************************************* + * Filename: target_core_pr.c + * + * This file contains SPC-3 compliant persistent reservations and + * legacy SPC-2 reservations with compatible reservation handling (CRH=1) + * + * Copyright (c) 2009, 2010 Rising Tide Systems + * Copyright (c) 2009, 2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger <nab@kernel.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include <linux/version.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <asm/unaligned.h> + +#include <target/target_core_base.h> +#include <target/target_core_device.h> +#include <target/target_core_tmr.h> +#include <target/target_core_tpg.h> +#include <target/target_core_transport.h> +#include <target/target_core_fabric_ops.h> +#include <target/target_core_configfs.h> + +#include "target_core_hba.h" +#include "target_core_pr.h" +#include "target_core_ua.h" + +/* + * Used for Specify Initiator Ports Capable Bit (SPEC_I_PT) + */ +struct pr_transport_id_holder { + int dest_local_nexus; + struct t10_pr_registration *dest_pr_reg; + struct se_portal_group *dest_tpg; + struct se_node_acl *dest_node_acl; + struct se_dev_entry *dest_se_deve; + struct list_head dest_list; +}; + +int core_pr_dump_initiator_port( + struct t10_pr_registration *pr_reg, + char *buf, + u32 size) +{ + if (!(pr_reg->isid_present_at_reg)) + return 0; + + snprintf(buf, size, ",i,0x%s", &pr_reg->pr_reg_isid[0]); + return 1; +} + +static void __core_scsi3_complete_pro_release(struct se_device *, struct se_node_acl *, + struct t10_pr_registration *, int); + +static int core_scsi2_reservation_seq_non_holder( + struct se_cmd *cmd, + unsigned char *cdb, + u32 pr_reg_type) +{ + switch (cdb[0]) { + case INQUIRY: + case RELEASE: + case RELEASE_10: + return 0; + default: + return 1; + } + + return 1; +} + +static int core_scsi2_reservation_check(struct se_cmd *cmd, u32 *pr_reg_type) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + int ret; + + if (!(sess)) + return 0; + + spin_lock(&dev->dev_reservation_lock); + if (!dev->dev_reserved_node_acl || !sess) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + if (dev->dev_reserved_node_acl != sess->se_node_acl) { + spin_unlock(&dev->dev_reservation_lock); + return -1; + } + if (!(dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID)) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + ret = (dev->dev_res_bin_isid == sess->sess_bin_isid) ? 0 : -1; + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +static int core_scsi2_reservation_release(struct se_cmd *cmd) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + struct se_portal_group *tpg = sess->se_tpg; + + if (!(sess) || !(tpg)) + return 0; + + spin_lock(&dev->dev_reservation_lock); + if (!dev->dev_reserved_node_acl || !sess) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + + if (dev->dev_reserved_node_acl != sess->se_node_acl) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + dev->dev_reserved_node_acl = NULL; + dev->dev_flags &= ~DF_SPC2_RESERVATIONS; + if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) { + dev->dev_res_bin_isid = 0; + dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID; + } + printk(KERN_INFO "SCSI-2 Released reservation for %s LUN: %u ->" + " MAPPED LUN: %u for %s\n", TPG_TFO(tpg)->get_fabric_name(), + SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, + sess->se_node_acl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + + return 0; +} + +static int core_scsi2_reservation_reserve(struct se_cmd *cmd) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + struct se_portal_group *tpg = sess->se_tpg; + + if ((T_TASK(cmd)->t_task_cdb[1] & 0x01) && + (T_TASK(cmd)->t_task_cdb[1] & 0x02)) { + printk(KERN_ERR "LongIO and Obselete Bits set, returning" + " ILLEGAL_REQUEST\n"); + return PYX_TRANSPORT_ILLEGAL_REQUEST; + } + /* + * This is currently the case for target_core_mod passthrough struct se_cmd + * ops + */ + if (!(sess) || !(tpg)) + return 0; + + spin_lock(&dev->dev_reservation_lock); + if (dev->dev_reserved_node_acl && + (dev->dev_reserved_node_acl != sess->se_node_acl)) { + printk(KERN_ERR "SCSI-2 RESERVATION CONFLIFT for %s fabric\n", + TPG_TFO(tpg)->get_fabric_name()); + printk(KERN_ERR "Original reserver LUN: %u %s\n", + SE_LUN(cmd)->unpacked_lun, + dev->dev_reserved_node_acl->initiatorname); + printk(KERN_ERR "Current attempt - LUN: %u -> MAPPED LUN: %u" + " from %s \n", SE_LUN(cmd)->unpacked_lun, + cmd->se_deve->mapped_lun, + sess->se_node_acl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + + dev->dev_reserved_node_acl = sess->se_node_acl; + dev->dev_flags |= DF_SPC2_RESERVATIONS; + if (sess->sess_bin_isid != 0) { + dev->dev_res_bin_isid = sess->sess_bin_isid; + dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID; + } + printk(KERN_INFO "SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u" + " for %s\n", TPG_TFO(tpg)->get_fabric_name(), + SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, + sess->se_node_acl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + + return 0; +} + +static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *, + struct se_node_acl *, struct se_session *); +static void core_scsi3_put_pr_reg(struct t10_pr_registration *); + +/* + * Setup in target_core_transport.c:transport_generic_cmd_sequencer() + * and called via struct se_cmd->transport_emulate_cdb() in TCM processing + * thread context. + */ +int core_scsi2_emulate_crh(struct se_cmd *cmd) +{ + struct se_session *se_sess = cmd->se_sess; + struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev; + struct t10_pr_registration *pr_reg; + struct t10_reservation_template *pr_tmpl = &su_dev->t10_reservation; + unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0]; + int crh = (T10_RES(su_dev)->res_type == SPC3_PERSISTENT_RESERVATIONS); + int conflict = 0; + + if (!(se_sess)) + return 0; + + if (!(crh)) + goto after_crh; + + pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl, + se_sess); + if (pr_reg) { + /* + * From spc4r17 5.7.3 Exceptions to SPC-2 RESERVE and RELEASE + * behavior + * + * A RESERVE(6) or RESERVE(10) command shall complete with GOOD + * status, but no reservation shall be established and the + * persistent reservation shall not be changed, if the command + * is received from a) and b) below. + * + * A RELEASE(6) or RELEASE(10) command shall complete with GOOD + * status, but the persistent reservation shall not be released, + * if the command is received from a) and b) + * + * a) An I_T nexus that is a persistent reservation holder; or + * b) An I_T nexus that is registered if a registrants only or + * all registrants type persistent reservation is present. + * + * In all other cases, a RESERVE(6) command, RESERVE(10) command, + * RELEASE(6) command, or RELEASE(10) command shall be processed + * as defined in SPC-2. + */ + if (pr_reg->pr_res_holder) { + core_scsi3_put_pr_reg(pr_reg); + return 0; + } + if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) || + (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) || + (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { + core_scsi3_put_pr_reg(pr_reg); + return 0; + } + core_scsi3_put_pr_reg(pr_reg); + conflict = 1; + } else { + /* + * Following spc2r20 5.5.1 Reservations overview: + * + * If a logical unit has executed a PERSISTENT RESERVE OUT + * command with the REGISTER or the REGISTER AND IGNORE + * EXISTING KEY service action and is still registered by any + * initiator, all RESERVE commands and all RELEASE commands + * regardless of initiator shall conflict and shall terminate + * with a RESERVATION CONFLICT status. + */ + spin_lock(&pr_tmpl->registration_lock); + conflict = (list_empty(&pr_tmpl->registration_list)) ? 0 : 1; + spin_unlock(&pr_tmpl->registration_lock); + } + + if (conflict) { + printk(KERN_ERR "Received legacy SPC-2 RESERVE/RELEASE" + " while active SPC-3 registrations exist," + " returning RESERVATION_CONFLICT\n"); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + +after_crh: + if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10)) + return core_scsi2_reservation_reserve(cmd); + else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10)) + return core_scsi2_reservation_release(cmd); + else + return PYX_TRANSPORT_INVALID_CDB_FIELD; +} + +/* + * Begin SPC-3/SPC-4 Persistent Reservations emulation support + * + * This function is called by those initiator ports who are *NOT* + * the active PR reservation holder when a reservation is present. + */ +static int core_scsi3_pr_seq_non_holder( + struct se_cmd *cmd, + unsigned char *cdb, + u32 pr_reg_type) +{ + struct se_dev_entry *se_deve; + struct se_session *se_sess = SE_SESS(cmd); + int other_cdb = 0, ignore_reg; + int registered_nexus = 0, ret = 1; /* Conflict by default */ + int all_reg = 0, reg_only = 0; /* ALL_REG, REG_ONLY */ + int we = 0; /* Write Exclusive */ + int legacy = 0; /* Act like a legacy device and return + * RESERVATION CONFLICT on some CDBs */ + /* + * A legacy SPC-2 reservation is being held. + */ + if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) + return core_scsi2_reservation_seq_non_holder(cmd, + cdb, pr_reg_type); + + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Determine if the registration should be ignored due to + * non-matching ISIDs in core_scsi3_pr_reservation_check(). + */ + ignore_reg = (pr_reg_type & 0x80000000); + if (ignore_reg) + pr_reg_type &= ~0x80000000; + + switch (pr_reg_type) { + case PR_TYPE_WRITE_EXCLUSIVE: + we = 1; + case PR_TYPE_EXCLUSIVE_ACCESS: + /* + * Some commands are only allowed for the persistent reservation + * holder. + */ + if ((se_deve->def_pr_registered) && !(ignore_reg)) + registered_nexus = 1; + break; + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + we = 1; + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + /* + * Some commands are only allowed for registered I_T Nexuses. + */ + reg_only = 1; + if ((se_deve->def_pr_registered) && !(ignore_reg)) + registered_nexus = 1; + break; + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + we = 1; + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + /* + * Each registered I_T Nexus is a reservation holder. + */ + all_reg = 1; + if ((se_deve->def_pr_registered) && !(ignore_reg)) + registered_nexus = 1; + break; + default: + return -1; + } + /* + * Referenced from spc4r17 table 45 for *NON* PR holder access + */ + switch (cdb[0]) { + case SECURITY_PROTOCOL_IN: + if (registered_nexus) + return 0; + ret = (we) ? 0 : 1; + break; + case MODE_SENSE: + case MODE_SENSE_10: + case READ_ATTRIBUTE: + case READ_BUFFER: + case RECEIVE_DIAGNOSTIC: + if (legacy) { + ret = 1; + break; + } + if (registered_nexus) { + ret = 0; + break; + } + ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ + break; + case PERSISTENT_RESERVE_OUT: + /* + * This follows PERSISTENT_RESERVE_OUT service actions that + * are allowed in the presence of various reservations. + * See spc4r17, table 46 + */ + switch (cdb[1] & 0x1f) { + case PRO_CLEAR: + case PRO_PREEMPT: + case PRO_PREEMPT_AND_ABORT: + ret = (registered_nexus) ? 0 : 1; + break; + case PRO_REGISTER: + case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: + ret = 0; + break; + case PRO_REGISTER_AND_MOVE: + case PRO_RESERVE: + ret = 1; + break; + case PRO_RELEASE: + ret = (registered_nexus) ? 0 : 1; + break; + default: + printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service" + " action: 0x%02x\n", cdb[1] & 0x1f); + return -1; + } + break; + case RELEASE: + case RELEASE_10: + /* Handled by CRH=1 in core_scsi2_emulate_crh() */ + ret = 0; + break; + case RESERVE: + case RESERVE_10: + /* Handled by CRH=1 in core_scsi2_emulate_crh() */ + ret = 0; + break; + case TEST_UNIT_READY: + ret = (legacy) ? 1 : 0; /* Conflict for legacy */ + break; + case MAINTENANCE_IN: + switch (cdb[1] & 0x1f) { + case MI_MANAGEMENT_PROTOCOL_IN: + if (registered_nexus) { + ret = 0; + break; + } + ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ + break; + case MI_REPORT_SUPPORTED_OPERATION_CODES: + case MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS: + if (legacy) { + ret = 1; + break; + } + if (registered_nexus) { + ret = 0; + break; + } + ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ + break; + case MI_REPORT_ALIASES: + case MI_REPORT_IDENTIFYING_INFORMATION: + case MI_REPORT_PRIORITY: + case MI_REPORT_TARGET_PGS: + case MI_REPORT_TIMESTAMP: + ret = 0; /* Allowed */ + break; + default: + printk(KERN_ERR "Unknown MI Service Action: 0x%02x\n", + (cdb[1] & 0x1f)); + return -1; + } + break; + case ACCESS_CONTROL_IN: + case ACCESS_CONTROL_OUT: + case INQUIRY: + case LOG_SENSE: + case READ_MEDIA_SERIAL_NUMBER: + case REPORT_LUNS: + case REQUEST_SENSE: + ret = 0; /*/ Allowed CDBs */ + break; + default: + other_cdb = 1; + break; + } + /* + * Case where the CDB is explictly allowed in the above switch + * statement. + */ + if (!(ret) && !(other_cdb)) { +#if 0 + printk(KERN_INFO "Allowing explict CDB: 0x%02x for %s" + " reservation holder\n", cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); +#endif + return ret; + } + /* + * Check if write exclusive initiator ports *NOT* holding the + * WRITE_EXCLUSIVE_* reservation. + */ + if ((we) && !(registered_nexus)) { + if (cmd->data_direction == DMA_TO_DEVICE) { + /* + * Conflict for write exclusive + */ + printk(KERN_INFO "%s Conflict for unregistered nexus" + " %s CDB: 0x%02x to %s reservation\n", + transport_dump_cmd_direction(cmd), + se_sess->se_node_acl->initiatorname, cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); + return 1; + } else { + /* + * Allow non WRITE CDBs for all Write Exclusive + * PR TYPEs to pass for registered and + * non-registered_nexuxes NOT holding the reservation. + * + * We only make noise for the unregisterd nexuses, + * as we expect registered non-reservation holding + * nexuses to issue CDBs. + */ +#if 0 + if (!(registered_nexus)) { + printk(KERN_INFO "Allowing implict CDB: 0x%02x" + " for %s reservation on unregistered" + " nexus\n", cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); + } +#endif + return 0; + } + } else if ((reg_only) || (all_reg)) { + if (registered_nexus) { + /* + * For PR_*_REG_ONLY and PR_*_ALL_REG reservations, + * allow commands from registered nexuses. + */ +#if 0 + printk(KERN_INFO "Allowing implict CDB: 0x%02x for %s" + " reservation\n", cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); +#endif + return 0; + } + } + printk(KERN_INFO "%s Conflict for %sregistered nexus %s CDB: 0x%2x" + " for %s reservation\n", transport_dump_cmd_direction(cmd), + (registered_nexus) ? "" : "un", + se_sess->se_node_acl->initiatorname, cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); + + return 1; /* Conflict by default */ +} + +static u32 core_scsi3_pr_generation(struct se_device *dev) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + u32 prg; + /* + * PRGeneration field shall contain the value of a 32-bit wrapping + * counter mainted by the device server. + * + * Note that this is done regardless of Active Persist across + * Target PowerLoss (APTPL) + * + * See spc4r17 section 6.3.12 READ_KEYS service action + */ + spin_lock(&dev->dev_reservation_lock); + prg = T10_RES(su_dev)->pr_generation++; + spin_unlock(&dev->dev_reservation_lock); + + return prg; +} + +static int core_scsi3_pr_reservation_check( + struct se_cmd *cmd, + u32 *pr_reg_type) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + int ret; + + if (!(sess)) + return 0; + /* + * A legacy SPC-2 reservation is being held. + */ + if (dev->dev_flags & DF_SPC2_RESERVATIONS) + return core_scsi2_reservation_check(cmd, pr_reg_type); + + spin_lock(&dev->dev_reservation_lock); + if (!(dev->dev_pr_res_holder)) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + *pr_reg_type = dev->dev_pr_res_holder->pr_res_type; + cmd->pr_res_key = dev->dev_pr_res_holder->pr_res_key; + if (dev->dev_pr_res_holder->pr_reg_nacl != sess->se_node_acl) { + spin_unlock(&dev->dev_reservation_lock); + return -1; + } + if (!(dev->dev_pr_res_holder->isid_present_at_reg)) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + ret = (dev->dev_pr_res_holder->pr_reg_bin_isid == + sess->sess_bin_isid) ? 0 : -1; + /* + * Use bit in *pr_reg_type to notify ISID mismatch in + * core_scsi3_pr_seq_non_holder(). + */ + if (ret != 0) + *pr_reg_type |= 0x80000000; + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +static struct t10_pr_registration *__core_scsi3_do_alloc_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_dev_entry *deve, + unsigned char *isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct t10_pr_registration *pr_reg; + + pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_ATOMIC); + if (!(pr_reg)) { + printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n"); + return NULL; + } + + pr_reg->pr_aptpl_buf = kzalloc(T10_RES(su_dev)->pr_aptpl_buf_len, + GFP_ATOMIC); + if (!(pr_reg->pr_aptpl_buf)) { + printk(KERN_ERR "Unable to allocate pr_reg->pr_aptpl_buf\n"); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + return NULL; + } + + INIT_LIST_HEAD(&pr_reg->pr_reg_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list); + atomic_set(&pr_reg->pr_res_holders, 0); + pr_reg->pr_reg_nacl = nacl; + pr_reg->pr_reg_deve = deve; + pr_reg->pr_res_mapped_lun = deve->mapped_lun; + pr_reg->pr_aptpl_target_lun = deve->se_lun->unpacked_lun; + pr_reg->pr_res_key = sa_res_key; + pr_reg->pr_reg_all_tg_pt = all_tg_pt; + pr_reg->pr_reg_aptpl = aptpl; + pr_reg->pr_reg_tg_pt_lun = deve->se_lun; + /* + * If an ISID value for this SCSI Initiator Port exists, + * save it to the registration now. + */ + if (isid != NULL) { + pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid); + snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid); + pr_reg->isid_present_at_reg = 1; + } + + return pr_reg; +} + +static int core_scsi3_lunacl_depend_item(struct se_dev_entry *); +static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *); + +/* + * Function used for handling PR registrations for ALL_TG_PT=1 and ALL_TG_PT=0 + * modes. + */ +static struct t10_pr_registration *__core_scsi3_alloc_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_dev_entry *deve, + unsigned char *isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl) +{ + struct se_dev_entry *deve_tmp; + struct se_node_acl *nacl_tmp; + struct se_port *port, *port_tmp; + struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; + struct t10_pr_registration *pr_reg, *pr_reg_atp, *pr_reg_tmp, *pr_reg_tmp_safe; + int ret; + /* + * Create a registration for the I_T Nexus upon which the + * PROUT REGISTER was received. + */ + pr_reg = __core_scsi3_do_alloc_registration(dev, nacl, deve, isid, + sa_res_key, all_tg_pt, aptpl); + if (!(pr_reg)) + return NULL; + /* + * Return pointer to pr_reg for ALL_TG_PT=0 + */ + if (!(all_tg_pt)) + return pr_reg; + /* + * Create list of matching SCSI Initiator Port registrations + * for ALL_TG_PT=1 + */ + spin_lock(&dev->se_port_lock); + list_for_each_entry_safe(port, port_tmp, &dev->dev_sep_list, sep_list) { + atomic_inc(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&dev->se_port_lock); + + spin_lock_bh(&port->sep_alua_lock); + list_for_each_entry(deve_tmp, &port->sep_alua_list, + alua_port_list) { + /* + * This pointer will be NULL for demo mode MappedLUNs + * that have not been make explict via a ConfigFS + * MappedLUN group for the SCSI Initiator Node ACL. + */ + if (!(deve_tmp->se_lun_acl)) + continue; + + nacl_tmp = deve_tmp->se_lun_acl->se_lun_nacl; + /* + * Skip the matching struct se_node_acl that is allocated + * above.. + */ + if (nacl == nacl_tmp) + continue; + /* + * Only perform PR registrations for target ports on + * the same fabric module as the REGISTER w/ ALL_TG_PT=1 + * arrived. + */ + if (tfo != nacl_tmp->se_tpg->se_tpg_tfo) + continue; + /* + * Look for a matching Initiator Node ACL in ASCII format + */ + if (strcmp(nacl->initiatorname, nacl_tmp->initiatorname)) + continue; + + atomic_inc(&deve_tmp->pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock_bh(&port->sep_alua_lock); + /* + * Grab a configfs group dependency that is released + * for the exception path at label out: below, or upon + * completion of adding ALL_TG_PT=1 registrations in + * __core_scsi3_add_registration() + */ + ret = core_scsi3_lunacl_depend_item(deve_tmp); + if (ret < 0) { + printk(KERN_ERR "core_scsi3_lunacl_depend" + "_item() failed\n"); + atomic_dec(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_dec(); + atomic_dec(&deve_tmp->pr_ref_count); + smp_mb__after_atomic_dec(); + goto out; + } + /* + * Located a matching SCSI Initiator Port on a different + * port, allocate the pr_reg_atp and attach it to the + * pr_reg->pr_reg_atp_list that will be processed once + * the original *pr_reg is processed in + * __core_scsi3_add_registration() + */ + pr_reg_atp = __core_scsi3_do_alloc_registration(dev, + nacl_tmp, deve_tmp, NULL, + sa_res_key, all_tg_pt, aptpl); + if (!(pr_reg_atp)) { + atomic_dec(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_dec(); + atomic_dec(&deve_tmp->pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_lunacl_undepend_item(deve_tmp); + goto out; + } + + list_add_tail(&pr_reg_atp->pr_reg_atp_mem_list, + &pr_reg->pr_reg_atp_list); + spin_lock_bh(&port->sep_alua_lock); + } + spin_unlock_bh(&port->sep_alua_lock); + + spin_lock(&dev->se_port_lock); + atomic_dec(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_dec(); + } + spin_unlock(&dev->se_port_lock); + + return pr_reg; +out: + list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, + &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { + list_del(&pr_reg_tmp->pr_reg_atp_mem_list); + core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); + kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp); + } + kmem_cache_free(t10_pr_reg_cache, pr_reg); + return NULL; +} + +int core_scsi3_alloc_aptpl_registration( + struct t10_reservation_template *pr_tmpl, + u64 sa_res_key, + unsigned char *i_port, + unsigned char *isid, + u32 mapped_lun, + unsigned char *t_port, + u16 tpgt, + u32 target_lun, + int res_holder, + int all_tg_pt, + u8 type) +{ + struct t10_pr_registration *pr_reg; + + if (!(i_port) || !(t_port) || !(sa_res_key)) { + printk(KERN_ERR "Illegal parameters for APTPL registration\n"); + return -1; + } + + pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_KERNEL); + if (!(pr_reg)) { + printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n"); + return -1; + } + pr_reg->pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, GFP_KERNEL); + + INIT_LIST_HEAD(&pr_reg->pr_reg_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list); + atomic_set(&pr_reg->pr_res_holders, 0); + pr_reg->pr_reg_nacl = NULL; + pr_reg->pr_reg_deve = NULL; + pr_reg->pr_res_mapped_lun = mapped_lun; + pr_reg->pr_aptpl_target_lun = target_lun; + pr_reg->pr_res_key = sa_res_key; + pr_reg->pr_reg_all_tg_pt = all_tg_pt; + pr_reg->pr_reg_aptpl = 1; + pr_reg->pr_reg_tg_pt_lun = NULL; + pr_reg->pr_res_scope = 0; /* Always LUN_SCOPE */ + pr_reg->pr_res_type = type; + /* + * If an ISID value had been saved in APTPL metadata for this + * SCSI Initiator Port, restore it now. + */ + if (isid != NULL) { + pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid); + snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid); + pr_reg->isid_present_at_reg = 1; + } + /* + * Copy the i_port and t_port information from caller. + */ + snprintf(pr_reg->pr_iport, PR_APTPL_MAX_IPORT_LEN, "%s", i_port); + snprintf(pr_reg->pr_tport, PR_APTPL_MAX_TPORT_LEN, "%s", t_port); + pr_reg->pr_reg_tpgt = tpgt; + /* + * Set pr_res_holder from caller, the pr_reg who is the reservation + * holder will get it's pointer set in core_scsi3_aptpl_reserve() once + * the Initiator Node LUN ACL from the fabric module is created for + * this registration. + */ + pr_reg->pr_res_holder = res_holder; + + list_add_tail(&pr_reg->pr_reg_aptpl_list, &pr_tmpl->aptpl_reg_list); + printk(KERN_INFO "SPC-3 PR APTPL Successfully added registration%s from" + " metadata\n", (res_holder) ? "+reservation" : ""); + return 0; +} + +static void core_scsi3_aptpl_reserve( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_node_acl *node_acl, + struct t10_pr_registration *pr_reg) +{ + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + spin_lock(&dev->dev_reservation_lock); + dev->dev_pr_res_holder = pr_reg; + spin_unlock(&dev->dev_reservation_lock); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: APTPL RESERVE created" + " new reservation holder TYPE: %s ALL_TG_PT: %d\n", + TPG_TFO(tpg)->get_fabric_name(), + core_scsi3_pr_dump_type(pr_reg->pr_res_type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n", + TPG_TFO(tpg)->get_fabric_name(), node_acl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); +} + +static void __core_scsi3_add_registration(struct se_device *, struct se_node_acl *, + struct t10_pr_registration *, int, int); + +static int __core_scsi3_check_aptpl_registration( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_lun *lun, + u32 target_lun, + struct se_node_acl *nacl, + struct se_dev_entry *deve) +{ + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + unsigned char i_port[PR_APTPL_MAX_IPORT_LEN]; + unsigned char t_port[PR_APTPL_MAX_TPORT_LEN]; + u16 tpgt; + + memset(i_port, 0, PR_APTPL_MAX_IPORT_LEN); + memset(t_port, 0, PR_APTPL_MAX_TPORT_LEN); + /* + * Copy Initiator Port information from struct se_node_acl + */ + snprintf(i_port, PR_APTPL_MAX_IPORT_LEN, "%s", nacl->initiatorname); + snprintf(t_port, PR_APTPL_MAX_TPORT_LEN, "%s", + TPG_TFO(tpg)->tpg_get_wwn(tpg)); + tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg); + /* + * Look for the matching registrations+reservation from those + * created from APTPL metadata. Note that multiple registrations + * may exist for fabrics that use ISIDs in their SCSI Initiator Port + * TransportIDs. + */ + spin_lock(&pr_tmpl->aptpl_reg_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list, + pr_reg_aptpl_list) { + if (!(strcmp(pr_reg->pr_iport, i_port)) && + (pr_reg->pr_res_mapped_lun == deve->mapped_lun) && + !(strcmp(pr_reg->pr_tport, t_port)) && + (pr_reg->pr_reg_tpgt == tpgt) && + (pr_reg->pr_aptpl_target_lun == target_lun)) { + + pr_reg->pr_reg_nacl = nacl; + pr_reg->pr_reg_deve = deve; + pr_reg->pr_reg_tg_pt_lun = lun; + + list_del(&pr_reg->pr_reg_aptpl_list); + spin_unlock(&pr_tmpl->aptpl_reg_lock); + /* + * At this point all of the pointers in *pr_reg will + * be setup, so go ahead and add the registration. + */ + + __core_scsi3_add_registration(dev, nacl, pr_reg, 0, 0); + /* + * If this registration is the reservation holder, + * make that happen now.. + */ + if (pr_reg->pr_res_holder) + core_scsi3_aptpl_reserve(dev, tpg, + nacl, pr_reg); + /* + * Reenable pr_aptpl_active to accept new metadata + * updates once the SCSI device is active again.. + */ + spin_lock(&pr_tmpl->aptpl_reg_lock); + pr_tmpl->pr_aptpl_active = 1; + } + } + spin_unlock(&pr_tmpl->aptpl_reg_lock); + + return 0; +} + +int core_scsi3_check_aptpl_registration( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_lun *lun, + struct se_lun_acl *lun_acl) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct se_node_acl *nacl = lun_acl->se_lun_nacl; + struct se_dev_entry *deve = &nacl->device_list[lun_acl->mapped_lun]; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return 0; + + return __core_scsi3_check_aptpl_registration(dev, tpg, lun, + lun->unpacked_lun, nacl, deve); +} + +static void __core_scsi3_dump_registration( + struct target_core_fabric_ops *tfo, + struct se_device *dev, + struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, + int register_type) +{ + struct se_portal_group *se_tpg = nacl->se_tpg; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(&i_buf[0], 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER%s Initiator" + " Node: %s%s\n", tfo->get_fabric_name(), (register_type == 2) ? + "_AND_MOVE" : (register_type == 1) ? + "_AND_IGNORE_EXISTING_KEY" : "", nacl->initiatorname, + (prf_isid) ? i_buf : ""); + printk(KERN_INFO "SPC-3 PR [%s] registration on Target Port: %s,0x%04x\n", + tfo->get_fabric_name(), tfo->tpg_get_wwn(se_tpg), + tfo->tpg_get_tag(se_tpg)); + printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target" + " Port(s)\n", tfo->get_fabric_name(), + (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE", + TRANSPORT(dev)->name); + printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:" + " 0x%08x APTPL: %d\n", tfo->get_fabric_name(), + pr_reg->pr_res_key, pr_reg->pr_res_generation, + pr_reg->pr_reg_aptpl); +} + +/* + * this function can be called with struct se_device->dev_reservation_lock + * when register_move = 1 + */ +static void __core_scsi3_add_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, + int register_type, + int register_move) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; + struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + + /* + * Increment PRgeneration counter for struct se_device upon a successful + * REGISTER, see spc4r17 section 6.3.2 READ_KEYS service action + * + * Also, when register_move = 1 for PROUT REGISTER_AND_MOVE service + * action, the struct se_device->dev_reservation_lock will already be held, + * so we do not call core_scsi3_pr_generation() which grabs the lock + * for the REGISTER. + */ + pr_reg->pr_res_generation = (register_move) ? + T10_RES(su_dev)->pr_generation++ : + core_scsi3_pr_generation(dev); + + spin_lock(&pr_tmpl->registration_lock); + list_add_tail(&pr_reg->pr_reg_list, &pr_tmpl->registration_list); + pr_reg->pr_reg_deve->def_pr_registered = 1; + + __core_scsi3_dump_registration(tfo, dev, nacl, pr_reg, register_type); + spin_unlock(&pr_tmpl->registration_lock); + /* + * Skip extra processing for ALL_TG_PT=0 or REGISTER_AND_MOVE. + */ + if (!(pr_reg->pr_reg_all_tg_pt) || (register_move)) + return; + /* + * Walk pr_reg->pr_reg_atp_list and add registrations for ALL_TG_PT=1 + * allocated in __core_scsi3_alloc_registration() + */ + list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, + &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { + list_del(&pr_reg_tmp->pr_reg_atp_mem_list); + + pr_reg_tmp->pr_res_generation = core_scsi3_pr_generation(dev); + + spin_lock(&pr_tmpl->registration_lock); + list_add_tail(&pr_reg_tmp->pr_reg_list, + &pr_tmpl->registration_list); + pr_reg_tmp->pr_reg_deve->def_pr_registered = 1; + + __core_scsi3_dump_registration(tfo, dev, + pr_reg_tmp->pr_reg_nacl, pr_reg_tmp, + register_type); + spin_unlock(&pr_tmpl->registration_lock); + /* + * Drop configfs group dependency reference from + * __core_scsi3_alloc_registration() + */ + core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); + } +} + +static int core_scsi3_alloc_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_dev_entry *deve, + unsigned char *isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl, + int register_type, + int register_move) +{ + struct t10_pr_registration *pr_reg; + + pr_reg = __core_scsi3_alloc_registration(dev, nacl, deve, isid, + sa_res_key, all_tg_pt, aptpl); + if (!(pr_reg)) + return -1; + + __core_scsi3_add_registration(dev, nacl, pr_reg, + register_type, register_move); + return 0; +} + +static struct t10_pr_registration *__core_scsi3_locate_pr_reg( + struct se_device *dev, + struct se_node_acl *nacl, + unsigned char *isid) +{ + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + struct se_portal_group *tpg; + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + /* + * First look for a matching struct se_node_acl + */ + if (pr_reg->pr_reg_nacl != nacl) + continue; + + tpg = pr_reg->pr_reg_nacl->se_tpg; + /* + * If this registration does NOT contain a fabric provided + * ISID, then we have found a match. + */ + if (!(pr_reg->isid_present_at_reg)) { + /* + * Determine if this SCSI device server requires that + * SCSI Intiatior TransportID w/ ISIDs is enforced + * for fabric modules (iSCSI) requiring them. + */ + if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) { + if (DEV_ATTRIB(dev)->enforce_pr_isids) + continue; + } + atomic_inc(&pr_reg->pr_res_holders); + smp_mb__after_atomic_inc(); + spin_unlock(&pr_tmpl->registration_lock); + return pr_reg; + } + /* + * If the *pr_reg contains a fabric defined ISID for multi-value + * SCSI Initiator Port TransportIDs, then we expect a valid + * matching ISID to be provided by the local SCSI Initiator Port. + */ + if (!(isid)) + continue; + if (strcmp(isid, pr_reg->pr_reg_isid)) + continue; + + atomic_inc(&pr_reg->pr_res_holders); + smp_mb__after_atomic_inc(); + spin_unlock(&pr_tmpl->registration_lock); + return pr_reg; + } + spin_unlock(&pr_tmpl->registration_lock); + + return NULL; +} + +static struct t10_pr_registration *core_scsi3_locate_pr_reg( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_session *sess) +{ + struct se_portal_group *tpg = nacl->se_tpg; + unsigned char buf[PR_REG_ISID_LEN], *isid_ptr = NULL; + + if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) { + memset(&buf[0], 0, PR_REG_ISID_LEN); + TPG_TFO(tpg)->sess_get_initiator_sid(sess, &buf[0], + PR_REG_ISID_LEN); + isid_ptr = &buf[0]; + } + + return __core_scsi3_locate_pr_reg(dev, nacl, isid_ptr); +} + +static void core_scsi3_put_pr_reg(struct t10_pr_registration *pr_reg) +{ + atomic_dec(&pr_reg->pr_res_holders); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_check_implict_release( + struct se_device *dev, + struct t10_pr_registration *pr_reg) +{ + struct se_node_acl *nacl = pr_reg->pr_reg_nacl; + struct t10_pr_registration *pr_res_holder; + int ret = 0; + + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (!(pr_res_holder)) { + spin_unlock(&dev->dev_reservation_lock); + return ret; + } + if (pr_res_holder == pr_reg) { + /* + * Perform an implict RELEASE if the registration that + * is being released is holding the reservation. + * + * From spc4r17, section 5.7.11.1: + * + * e) If the I_T nexus is the persistent reservation holder + * and the persistent reservation is not an all registrants + * type, then a PERSISTENT RESERVE OUT command with REGISTER + * service action or REGISTER AND IGNORE EXISTING KEY + * service action with the SERVICE ACTION RESERVATION KEY + * field set to zero (see 5.7.11.3). + */ + __core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0); + ret = 1; + /* + * For 'All Registrants' reservation types, all existing + * registrations are still processed as reservation holders + * in core_scsi3_pr_seq_non_holder() after the initial + * reservation holder is implictly released here. + */ + } else if (pr_reg->pr_reg_all_tg_pt && + (!strcmp(pr_res_holder->pr_reg_nacl->initiatorname, + pr_reg->pr_reg_nacl->initiatorname)) && + (pr_res_holder->pr_res_key == pr_reg->pr_res_key)) { + printk(KERN_ERR "SPC-3 PR: Unable to perform ALL_TG_PT=1" + " UNREGISTER while existing reservation with matching" + " key 0x%016Lx is present from another SCSI Initiator" + " Port\n", pr_reg->pr_res_key); + ret = -1; + } + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +/* + * Called with struct t10_reservation_template->registration_lock held. + */ +static void __core_scsi3_free_registration( + struct se_device *dev, + struct t10_pr_registration *pr_reg, + struct list_head *preempt_and_abort_list, + int dec_holders) +{ + struct target_core_fabric_ops *tfo = + pr_reg->pr_reg_nacl->se_tpg->se_tpg_tfo; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + pr_reg->pr_reg_deve->def_pr_registered = 0; + pr_reg->pr_reg_deve->pr_res_key = 0; + list_del(&pr_reg->pr_reg_list); + /* + * Caller accessing *pr_reg using core_scsi3_locate_pr_reg(), + * so call core_scsi3_put_pr_reg() to decrement our reference. + */ + if (dec_holders) + core_scsi3_put_pr_reg(pr_reg); + /* + * Wait until all reference from any other I_T nexuses for this + * *pr_reg have been released. Because list_del() is called above, + * the last core_scsi3_put_pr_reg(pr_reg) will release this reference + * count back to zero, and we release *pr_reg. + */ + while (atomic_read(&pr_reg->pr_res_holders) != 0) { + spin_unlock(&pr_tmpl->registration_lock); + printk("SPC-3 PR [%s] waiting for pr_res_holders\n", + tfo->get_fabric_name()); + cpu_relax(); + spin_lock(&pr_tmpl->registration_lock); + } + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: UNREGISTER Initiator" + " Node: %s%s\n", tfo->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); + printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target" + " Port(s)\n", tfo->get_fabric_name(), + (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE", + TRANSPORT(dev)->name); + printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:" + " 0x%08x\n", tfo->get_fabric_name(), pr_reg->pr_res_key, + pr_reg->pr_res_generation); + + if (!(preempt_and_abort_list)) { + pr_reg->pr_reg_deve = NULL; + pr_reg->pr_reg_nacl = NULL; + kfree(pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + return; + } + /* + * For PREEMPT_AND_ABORT, the list of *pr_reg in preempt_and_abort_list + * are released once the ABORT_TASK_SET has completed.. + */ + list_add_tail(&pr_reg->pr_reg_abort_list, preempt_and_abort_list); +} + +void core_scsi3_free_pr_reg_from_nacl( + struct se_device *dev, + struct se_node_acl *nacl) +{ + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder; + /* + * If the passed se_node_acl matches the reservation holder, + * release the reservation. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if ((pr_res_holder != NULL) && + (pr_res_holder->pr_reg_nacl == nacl)) + __core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0); + spin_unlock(&dev->dev_reservation_lock); + /* + * Release any registration associated with the struct se_node_acl. + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + if (pr_reg->pr_reg_nacl != nacl) + continue; + + __core_scsi3_free_registration(dev, pr_reg, NULL, 0); + } + spin_unlock(&pr_tmpl->registration_lock); +} + +void core_scsi3_free_all_registrations( + struct se_device *dev) +{ + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder; + + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (pr_res_holder != NULL) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + __core_scsi3_complete_pro_release(dev, pr_res_nacl, + pr_res_holder, 0); + } + spin_unlock(&dev->dev_reservation_lock); + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + __core_scsi3_free_registration(dev, pr_reg, NULL, 0); + } + spin_unlock(&pr_tmpl->registration_lock); + + spin_lock(&pr_tmpl->aptpl_reg_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list, + pr_reg_aptpl_list) { + list_del(&pr_reg->pr_reg_aptpl_list); + kfree(pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + } + spin_unlock(&pr_tmpl->aptpl_reg_lock); +} + +static int core_scsi3_tpg_depend_item(struct se_portal_group *tpg) +{ + return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, + &tpg->tpg_group.cg_item); +} + +static void core_scsi3_tpg_undepend_item(struct se_portal_group *tpg) +{ + configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, + &tpg->tpg_group.cg_item); + + atomic_dec(&tpg->tpg_pr_ref_count); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl) +{ + struct se_portal_group *tpg = nacl->se_tpg; + + if (nacl->dynamic_node_acl) + return 0; + + return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, + &nacl->acl_group.cg_item); +} + +static void core_scsi3_nodeacl_undepend_item(struct se_node_acl *nacl) +{ + struct se_portal_group *tpg = nacl->se_tpg; + + if (nacl->dynamic_node_acl) { + atomic_dec(&nacl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); + return; + } + + configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, + &nacl->acl_group.cg_item); + + atomic_dec(&nacl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve) +{ + struct se_lun_acl *lun_acl = se_deve->se_lun_acl; + struct se_node_acl *nacl; + struct se_portal_group *tpg; + /* + * For nacl->dynamic_node_acl=1 + */ + if (!(lun_acl)) + return 0; + + nacl = lun_acl->se_lun_nacl; + tpg = nacl->se_tpg; + + return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, + &lun_acl->se_lun_group.cg_item); +} + +static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve) +{ + struct se_lun_acl *lun_acl = se_deve->se_lun_acl; + struct se_node_acl *nacl; + struct se_portal_group *tpg; + /* + * For nacl->dynamic_node_acl=1 + */ + if (!(lun_acl)) { + atomic_dec(&se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); + return; + } + nacl = lun_acl->se_lun_nacl; + tpg = nacl->se_tpg; + + configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, + &lun_acl->se_lun_group.cg_item); + + atomic_dec(&se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_decode_spec_i_port( + struct se_cmd *cmd, + struct se_portal_group *tpg, + unsigned char *l_isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_port *tmp_port; + struct se_portal_group *dest_tpg = NULL, *tmp_tpg; + struct se_session *se_sess = SE_SESS(cmd); + struct se_node_acl *dest_node_acl = NULL; + struct se_dev_entry *dest_se_deve = NULL, *local_se_deve; + struct t10_pr_registration *dest_pr_reg, *local_pr_reg, *pr_reg_e; + struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe; + struct list_head tid_dest_list; + struct pr_transport_id_holder *tidh_new, *tidh, *tidh_tmp; + struct target_core_fabric_ops *tmp_tf_ops; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + unsigned char *ptr, *i_str = NULL, proto_ident, tmp_proto_ident; + char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN]; + u32 tpdl, tid_len = 0; + int ret, dest_local_nexus, prf_isid; + u32 dest_rtpi = 0; + + memset(dest_iport, 0, 64); + INIT_LIST_HEAD(&tid_dest_list); + + local_se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Allocate a struct pr_transport_id_holder and setup the + * local_node_acl and local_se_deve pointers and add to + * struct list_head tid_dest_list for add registration + * processing in the loop of tid_dest_list below. + */ + tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); + if (!(tidh_new)) { + printk(KERN_ERR "Unable to allocate tidh_new\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + INIT_LIST_HEAD(&tidh_new->dest_list); + tidh_new->dest_tpg = tpg; + tidh_new->dest_node_acl = se_sess->se_node_acl; + tidh_new->dest_se_deve = local_se_deve; + + local_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd), + se_sess->se_node_acl, local_se_deve, l_isid, + sa_res_key, all_tg_pt, aptpl); + if (!(local_pr_reg)) { + kfree(tidh_new); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + tidh_new->dest_pr_reg = local_pr_reg; + /* + * The local I_T nexus does not hold any configfs dependances, + * so we set tid_h->dest_local_nexus=1 to prevent the + * configfs_undepend_item() calls in the tid_dest_list loops below. + */ + tidh_new->dest_local_nexus = 1; + list_add_tail(&tidh_new->dest_list, &tid_dest_list); + /* + * For a PERSISTENT RESERVE OUT specify initiator ports payload, + * first extract TransportID Parameter Data Length, and make sure + * the value matches up to the SCSI expected data transfer length. + */ + tpdl = (buf[24] & 0xff) << 24; + tpdl |= (buf[25] & 0xff) << 16; + tpdl |= (buf[26] & 0xff) << 8; + tpdl |= buf[27] & 0xff; + + if ((tpdl + 28) != cmd->data_length) { + printk(KERN_ERR "SPC-3 PR: Illegal tpdl: %u + 28 byte header" + " does not equal CDB data_length: %u\n", tpdl, + cmd->data_length); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + /* + * Start processing the received transport IDs using the + * receiving I_T Nexus portal's fabric dependent methods to + * obtain the SCSI Initiator Port/Device Identifiers. + */ + ptr = &buf[28]; + + while (tpdl > 0) { + proto_ident = (ptr[0] & 0x0f); + dest_tpg = NULL; + + spin_lock(&dev->se_port_lock); + list_for_each_entry(tmp_port, &dev->dev_sep_list, sep_list) { + tmp_tpg = tmp_port->sep_tpg; + if (!(tmp_tpg)) + continue; + tmp_tf_ops = TPG_TFO(tmp_tpg); + if (!(tmp_tf_ops)) + continue; + if (!(tmp_tf_ops->get_fabric_proto_ident) || + !(tmp_tf_ops->tpg_parse_pr_out_transport_id)) + continue; + /* + * Look for the matching proto_ident provided by + * the received TransportID + */ + tmp_proto_ident = tmp_tf_ops->get_fabric_proto_ident(tmp_tpg); + if (tmp_proto_ident != proto_ident) + continue; + dest_rtpi = tmp_port->sep_rtpi; + + i_str = tmp_tf_ops->tpg_parse_pr_out_transport_id( + tmp_tpg, (const char *)ptr, &tid_len, + &iport_ptr); + if (!(i_str)) + continue; + + atomic_inc(&tmp_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock(&dev->se_port_lock); + + ret = core_scsi3_tpg_depend_item(tmp_tpg); + if (ret != 0) { + printk(KERN_ERR " core_scsi3_tpg_depend_item()" + " for tmp_tpg\n"); + atomic_dec(&tmp_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_dec(); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + /* + * Locate the desination initiator ACL to be registered + * from the decoded fabric module specific TransportID + * at *i_str. + */ + spin_lock_bh(&tmp_tpg->acl_node_lock); + dest_node_acl = __core_tpg_get_initiator_node_acl( + tmp_tpg, i_str); + if (dest_node_acl) { + atomic_inc(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_inc(); + } + spin_unlock_bh(&tmp_tpg->acl_node_lock); + + if (!(dest_node_acl)) { + core_scsi3_tpg_undepend_item(tmp_tpg); + spin_lock(&dev->se_port_lock); + continue; + } + + ret = core_scsi3_nodeacl_depend_item(dest_node_acl); + if (ret != 0) { + printk(KERN_ERR "configfs_depend_item() failed" + " for dest_node_acl->acl_group\n"); + atomic_dec(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_tpg_undepend_item(tmp_tpg); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + + dest_tpg = tmp_tpg; + printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node:" + " %s Port RTPI: %hu\n", + TPG_TFO(dest_tpg)->get_fabric_name(), + dest_node_acl->initiatorname, dest_rtpi); + + spin_lock(&dev->se_port_lock); + break; + } + spin_unlock(&dev->se_port_lock); + + if (!(dest_tpg)) { + printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Unable to locate" + " dest_tpg\n"); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } +#if 0 + printk("SPC-3 PR SPEC_I_PT: Got %s data_length: %u tpdl: %u" + " tid_len: %d for %s + %s\n", + TPG_TFO(dest_tpg)->get_fabric_name(), cmd->data_length, + tpdl, tid_len, i_str, iport_ptr); +#endif + if (tid_len > tpdl) { + printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Illegal tid_len:" + " %u for Transport ID: %s\n", tid_len, ptr); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + /* + * Locate the desintation struct se_dev_entry pointer for matching + * RELATIVE TARGET PORT IDENTIFIER on the receiving I_T Nexus + * Target Port. + */ + dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, + dest_rtpi); + if (!(dest_se_deve)) { + printk(KERN_ERR "Unable to locate %s dest_se_deve" + " from destination RTPI: %hu\n", + TPG_TFO(dest_tpg)->get_fabric_name(), + dest_rtpi); + + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + + ret = core_scsi3_lunacl_depend_item(dest_se_deve); + if (ret < 0) { + printk(KERN_ERR "core_scsi3_lunacl_depend_item()" + " failed\n"); + atomic_dec(&dest_se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } +#if 0 + printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node: %s" + " dest_se_deve mapped_lun: %u\n", + TPG_TFO(dest_tpg)->get_fabric_name(), + dest_node_acl->initiatorname, dest_se_deve->mapped_lun); +#endif + /* + * Skip any TransportIDs that already have a registration for + * this target port. + */ + pr_reg_e = __core_scsi3_locate_pr_reg(dev, dest_node_acl, + iport_ptr); + if (pr_reg_e) { + core_scsi3_put_pr_reg(pr_reg_e); + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ptr += tid_len; + tpdl -= tid_len; + tid_len = 0; + continue; + } + /* + * Allocate a struct pr_transport_id_holder and setup + * the dest_node_acl and dest_se_deve pointers for the + * loop below. + */ + tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), + GFP_KERNEL); + if (!(tidh_new)) { + printk(KERN_ERR "Unable to allocate tidh_new\n"); + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + INIT_LIST_HEAD(&tidh_new->dest_list); + tidh_new->dest_tpg = dest_tpg; + tidh_new->dest_node_acl = dest_node_acl; + tidh_new->dest_se_deve = dest_se_deve; + + /* + * Allocate, but do NOT add the registration for the + * TransportID referenced SCSI Initiator port. This + * done because of the following from spc4r17 in section + * 6.14.3 wrt SPEC_I_PT: + * + * "If a registration fails for any initiator port (e.g., if th + * logical unit does not have enough resources available to + * hold the registration information), no registrations shall be + * made, and the command shall be terminated with + * CHECK CONDITION status." + * + * That means we call __core_scsi3_alloc_registration() here, + * and then call __core_scsi3_add_registration() in the + * 2nd loop which will never fail. + */ + dest_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd), + dest_node_acl, dest_se_deve, iport_ptr, + sa_res_key, all_tg_pt, aptpl); + if (!(dest_pr_reg)) { + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + kfree(tidh_new); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + tidh_new->dest_pr_reg = dest_pr_reg; + list_add_tail(&tidh_new->dest_list, &tid_dest_list); + + ptr += tid_len; + tpdl -= tid_len; + tid_len = 0; + + } + /* + * Go ahead and create a registrations from tid_dest_list for the + * SPEC_I_PT provided TransportID for the *tidh referenced dest_node_acl + * and dest_se_deve. + * + * The SA Reservation Key from the PROUT is set for the + * registration, and ALL_TG_PT is also passed. ALL_TG_PT=1 + * means that the TransportID Initiator port will be + * registered on all of the target ports in the SCSI target device + * ALL_TG_PT=0 means the registration will only be for the + * SCSI target port the PROUT REGISTER with SPEC_I_PT=1 + * was received. + */ + list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) { + dest_tpg = tidh->dest_tpg; + dest_node_acl = tidh->dest_node_acl; + dest_se_deve = tidh->dest_se_deve; + dest_pr_reg = tidh->dest_pr_reg; + dest_local_nexus = tidh->dest_local_nexus; + + list_del(&tidh->dest_list); + kfree(tidh); + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(dest_pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + __core_scsi3_add_registration(SE_DEV(cmd), dest_node_acl, + dest_pr_reg, 0, 0); + + printk(KERN_INFO "SPC-3 PR [%s] SPEC_I_PT: Successfully" + " registered Transport ID for Node: %s%s Mapped LUN:" + " %u\n", TPG_TFO(dest_tpg)->get_fabric_name(), + dest_node_acl->initiatorname, (prf_isid) ? + &i_buf[0] : "", dest_se_deve->mapped_lun); + + if (dest_local_nexus) + continue; + + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + } + + return 0; +out: + /* + * For the failure case, release everything from tid_dest_list + * including *dest_pr_reg and the configfs dependances.. + */ + list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) { + dest_tpg = tidh->dest_tpg; + dest_node_acl = tidh->dest_node_acl; + dest_se_deve = tidh->dest_se_deve; + dest_pr_reg = tidh->dest_pr_reg; + dest_local_nexus = tidh->dest_local_nexus; + + list_del(&tidh->dest_list); + kfree(tidh); + /* + * Release any extra ALL_TG_PT=1 registrations for + * the SPEC_I_PT=1 case. + */ + list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, + &dest_pr_reg->pr_reg_atp_list, + pr_reg_atp_mem_list) { + list_del(&pr_reg_tmp->pr_reg_atp_mem_list); + core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); + kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp); + } + + kfree(dest_pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, dest_pr_reg); + + if (dest_local_nexus) + continue; + + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + } + return ret; +} + +/* + * Called with struct se_device->dev_reservation_lock held + */ +static int __core_scsi3_update_aptpl_buf( + struct se_device *dev, + unsigned char *buf, + u32 pr_aptpl_buf_len, + int clear_aptpl_metadata) +{ + struct se_lun *lun; + struct se_portal_group *tpg; + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct t10_pr_registration *pr_reg; + unsigned char tmp[512], isid_buf[32]; + ssize_t len = 0; + int reg_count = 0; + + memset(buf, 0, pr_aptpl_buf_len); + /* + * Called to clear metadata once APTPL has been deactivated. + */ + if (clear_aptpl_metadata) { + snprintf(buf, pr_aptpl_buf_len, + "No Registrations or Reservations\n"); + return 0; + } + /* + * Walk the registration list.. + */ + spin_lock(&T10_RES(su_dev)->registration_lock); + list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, + pr_reg_list) { + + tmp[0] = '\0'; + isid_buf[0] = '\0'; + tpg = pr_reg->pr_reg_nacl->se_tpg; + lun = pr_reg->pr_reg_tg_pt_lun; + /* + * Write out any ISID value to APTPL metadata that was included + * in the original registration. + */ + if (pr_reg->isid_present_at_reg) + snprintf(isid_buf, 32, "initiator_sid=%s\n", + pr_reg->pr_reg_isid); + /* + * Include special metadata if the pr_reg matches the + * reservation holder. + */ + if (dev->dev_pr_res_holder == pr_reg) { + snprintf(tmp, 512, "PR_REG_START: %d" + "\ninitiator_fabric=%s\n" + "initiator_node=%s\n%s" + "sa_res_key=%llu\n" + "res_holder=1\nres_type=%02x\n" + "res_scope=%02x\nres_all_tg_pt=%d\n" + "mapped_lun=%u\n", reg_count, + TPG_TFO(tpg)->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, isid_buf, + pr_reg->pr_res_key, pr_reg->pr_res_type, + pr_reg->pr_res_scope, pr_reg->pr_reg_all_tg_pt, + pr_reg->pr_res_mapped_lun); + } else { + snprintf(tmp, 512, "PR_REG_START: %d\n" + "initiator_fabric=%s\ninitiator_node=%s\n%s" + "sa_res_key=%llu\nres_holder=0\n" + "res_all_tg_pt=%d\nmapped_lun=%u\n", + reg_count, TPG_TFO(tpg)->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, isid_buf, + pr_reg->pr_res_key, pr_reg->pr_reg_all_tg_pt, + pr_reg->pr_res_mapped_lun); + } + + if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + printk(KERN_ERR "Unable to update renaming" + " APTPL metadata\n"); + spin_unlock(&T10_RES(su_dev)->registration_lock); + return -1; + } + len += sprintf(buf+len, "%s", tmp); + + /* + * Include information about the associated SCSI target port. + */ + snprintf(tmp, 512, "target_fabric=%s\ntarget_node=%s\n" + "tpgt=%hu\nport_rtpi=%hu\ntarget_lun=%u\nPR_REG_END:" + " %d\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_wwn(tpg), + TPG_TFO(tpg)->tpg_get_tag(tpg), + lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count); + + if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + printk(KERN_ERR "Unable to update renaming" + " APTPL metadata\n"); + spin_unlock(&T10_RES(su_dev)->registration_lock); + return -1; + } + len += sprintf(buf+len, "%s", tmp); + reg_count++; + } + spin_unlock(&T10_RES(su_dev)->registration_lock); + + if (!(reg_count)) + len += sprintf(buf+len, "No Registrations or Reservations"); + + return 0; +} + +static int core_scsi3_update_aptpl_buf( + struct se_device *dev, + unsigned char *buf, + u32 pr_aptpl_buf_len, + int clear_aptpl_metadata) +{ + int ret; + + spin_lock(&dev->dev_reservation_lock); + ret = __core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len, + clear_aptpl_metadata); + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +/* + * Called with struct se_device->aptpl_file_mutex held + */ +static int __core_scsi3_write_aptpl_to_file( + struct se_device *dev, + unsigned char *buf, + u32 pr_aptpl_buf_len) +{ + struct t10_wwn *wwn = &SU_DEV(dev)->t10_wwn; + struct file *file; + struct iovec iov[1]; + mm_segment_t old_fs; + int flags = O_RDWR | O_CREAT | O_TRUNC; + char path[512]; + int ret; + + memset(iov, 0, sizeof(struct iovec)); + memset(path, 0, 512); + + if (strlen(&wwn->unit_serial[0]) > 512) { + printk(KERN_ERR "WWN value for struct se_device does not fit" + " into path buffer\n"); + return -1; + } + + snprintf(path, 512, "/var/target/pr/aptpl_%s", &wwn->unit_serial[0]); + file = filp_open(path, flags, 0600); + if (IS_ERR(file) || !file || !file->f_dentry) { + printk(KERN_ERR "filp_open(%s) for APTPL metadata" + " failed\n", path); + return -1; + } + + iov[0].iov_base = &buf[0]; + if (!(pr_aptpl_buf_len)) + iov[0].iov_len = (strlen(&buf[0]) + 1); /* Add extra for NULL */ + else + iov[0].iov_len = pr_aptpl_buf_len; + + old_fs = get_fs(); + set_fs(get_ds()); + ret = vfs_writev(file, &iov[0], 1, &file->f_pos); + set_fs(old_fs); + + if (ret < 0) { + printk("Error writing APTPL metadata file: %s\n", path); + filp_close(file, NULL); + return -1; + } + filp_close(file, NULL); + + return 0; +} + +static int core_scsi3_update_and_write_aptpl( + struct se_device *dev, + unsigned char *in_buf, + u32 in_pr_aptpl_buf_len) +{ + unsigned char null_buf[64], *buf; + u32 pr_aptpl_buf_len; + int ret, clear_aptpl_metadata = 0; + /* + * Can be called with a NULL pointer from PROUT service action CLEAR + */ + if (!(in_buf)) { + memset(null_buf, 0, 64); + buf = &null_buf[0]; + /* + * This will clear the APTPL metadata to: + * "No Registrations or Reservations" status + */ + pr_aptpl_buf_len = 64; + clear_aptpl_metadata = 1; + } else { + buf = in_buf; + pr_aptpl_buf_len = in_pr_aptpl_buf_len; + } + + ret = core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len, + clear_aptpl_metadata); + if (ret != 0) + return -1; + /* + * __core_scsi3_write_aptpl_to_file() will call strlen() + * on the passed buf to determine pr_aptpl_buf_len. + */ + ret = __core_scsi3_write_aptpl_to_file(dev, buf, 0); + if (ret != 0) + return -1; + + return ret; +} + +static int core_scsi3_emulate_pro_register( + struct se_cmd *cmd, + u64 res_key, + u64 sa_res_key, + int aptpl, + int all_tg_pt, + int spec_i_pt, + int ignore_key) +{ + struct se_session *se_sess = SE_SESS(cmd); + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *se_deve; + struct se_lun *se_lun = SE_LUN(cmd); + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp, *pr_reg_e; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + /* Used for APTPL metadata w/ UNREGISTER */ + unsigned char *pr_aptpl_buf = NULL; + unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL; + int pr_holder = 0, ret = 0, type; + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + se_tpg = se_sess->se_tpg; + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + + if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) { + memset(&isid_buf[0], 0, PR_REG_ISID_LEN); + TPG_TFO(se_tpg)->sess_get_initiator_sid(se_sess, &isid_buf[0], + PR_REG_ISID_LEN); + isid_ptr = &isid_buf[0]; + } + /* + * Follow logic from spc4r17 Section 5.7.7, Register Behaviors Table 47 + */ + pr_reg_e = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess); + if (!(pr_reg_e)) { + if (res_key) { + printk(KERN_WARNING "SPC-3 PR: Reservation Key non-zero" + " for SA REGISTER, returning CONFLICT\n"); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * Do nothing but return GOOD status. + */ + if (!(sa_res_key)) + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + + if (!(spec_i_pt)) { + /* + * Perform the Service Action REGISTER on the Initiator + * Port Endpoint that the PRO was received from on the + * Logical Unit of the SCSI device server. + */ + ret = core_scsi3_alloc_registration(SE_DEV(cmd), + se_sess->se_node_acl, se_deve, isid_ptr, + sa_res_key, all_tg_pt, aptpl, + ignore_key, 0); + if (ret != 0) { + printk(KERN_ERR "Unable to allocate" + " struct t10_pr_registration\n"); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + } else { + /* + * Register both the Initiator port that received + * PROUT SA REGISTER + SPEC_I_PT=1 and extract SCSI + * TransportID from Parameter list and loop through + * fabric dependent parameter list while calling + * logic from of core_scsi3_alloc_registration() for + * each TransportID provided SCSI Initiator Port/Device + */ + ret = core_scsi3_decode_spec_i_port(cmd, se_tpg, + isid_ptr, sa_res_key, all_tg_pt, aptpl); + if (ret != 0) + return ret; + } + /* + * Nothing left to do for the APTPL=0 case. + */ + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); + printk("SPC-3 PR: Set APTPL Bit Deactivated for" + " REGISTER\n"); + return 0; + } + /* + * Locate the newly allocated local I_T Nexus *pr_reg, and + * update the APTPL metadata information using its + * preallocated *pr_reg->pr_aptpl_buf. + */ + pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), + se_sess->se_node_acl, se_sess); + + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) { + pr_tmpl->pr_aptpl_active = 1; + printk("SPC-3 PR: Set APTPL Bit Activated for REGISTER\n"); + } + + core_scsi3_put_pr_reg(pr_reg); + return ret; + } else { + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = pr_reg_e; + type = pr_reg->pr_res_type; + + if (!(ignore_key)) { + if (res_key != pr_reg->pr_res_key) { + printk(KERN_ERR "SPC-3 PR REGISTER: Received" + " res_key: 0x%016Lx does not match" + " existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, + pr_reg->pr_res_key); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + } + if (spec_i_pt) { + printk(KERN_ERR "SPC-3 PR UNREGISTER: SPEC_I_PT" + " set while sa_res_key=0\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * An existing ALL_TG_PT=1 registration being released + * must also set ALL_TG_PT=1 in the incoming PROUT. + */ + if (pr_reg->pr_reg_all_tg_pt && !(all_tg_pt)) { + printk(KERN_ERR "SPC-3 PR UNREGISTER: ALL_TG_PT=1" + " registration exists, but ALL_TG_PT=1 bit not" + " present in received PROUT\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + /* + * Allocate APTPL metadata buffer used for UNREGISTER ops + */ + if (aptpl) { + pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, + GFP_KERNEL); + if (!(pr_aptpl_buf)) { + printk(KERN_ERR "Unable to allocate" + " pr_aptpl_buf\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + } + /* + * sa_res_key=0 Unregister Reservation Key for registered I_T + * Nexus sa_res_key=1 Change Reservation Key for registered I_T + * Nexus. + */ + if (!(sa_res_key)) { + pr_holder = core_scsi3_check_implict_release( + SE_DEV(cmd), pr_reg); + if (pr_holder < 0) { + kfree(pr_aptpl_buf); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + + spin_lock(&pr_tmpl->registration_lock); + /* + * Release all ALL_TG_PT=1 for the matching SCSI Initiator Port + * and matching pr_res_key. + */ + if (pr_reg->pr_reg_all_tg_pt) { + list_for_each_entry_safe(pr_reg_p, pr_reg_tmp, + &pr_tmpl->registration_list, + pr_reg_list) { + + if (!(pr_reg_p->pr_reg_all_tg_pt)) + continue; + + if (pr_reg_p->pr_res_key != res_key) + continue; + + if (pr_reg == pr_reg_p) + continue; + + if (strcmp(pr_reg->pr_reg_nacl->initiatorname, + pr_reg_p->pr_reg_nacl->initiatorname)) + continue; + + __core_scsi3_free_registration(dev, + pr_reg_p, NULL, 0); + } + } + /* + * Release the calling I_T Nexus registration now.. + */ + __core_scsi3_free_registration(SE_DEV(cmd), pr_reg, + NULL, 1); + /* + * From spc4r17, section 5.7.11.3 Unregistering + * + * If the persistent reservation is a registrants only + * type, the device server shall establish a unit + * attention condition for the initiator port associated + * with every registered I_T nexus except for the I_T + * nexus on which the PERSISTENT RESERVE OUT command was + * received, with the additional sense code set to + * RESERVATIONS RELEASED. + */ + if (pr_holder && + ((type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) || + (type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY))) { + list_for_each_entry(pr_reg_p, + &pr_tmpl->registration_list, + pr_reg_list) { + + core_scsi3_ua_allocate( + pr_reg_p->pr_reg_nacl, + pr_reg_p->pr_res_mapped_lun, + 0x2A, + ASCQ_2AH_RESERVATIONS_RELEASED); + } + } + spin_unlock(&pr_tmpl->registration_lock); + + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(dev, NULL, 0); + printk("SPC-3 PR: Set APTPL Bit Deactivated" + " for UNREGISTER\n"); + return 0; + } + + ret = core_scsi3_update_and_write_aptpl(dev, + &pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) { + pr_tmpl->pr_aptpl_active = 1; + printk("SPC-3 PR: Set APTPL Bit Activated" + " for UNREGISTER\n"); + } + + kfree(pr_aptpl_buf); + return ret; + } else { + /* + * Increment PRgeneration counter for struct se_device" + * upon a successful REGISTER, see spc4r17 section 6.3.2 + * READ_KEYS service action. + */ + pr_reg->pr_res_generation = core_scsi3_pr_generation( + SE_DEV(cmd)); + pr_reg->pr_res_key = sa_res_key; + printk("SPC-3 PR [%s] REGISTER%s: Changed Reservation" + " Key for %s to: 0x%016Lx PRgeneration:" + " 0x%08x\n", CMD_TFO(cmd)->get_fabric_name(), + (ignore_key) ? "_AND_IGNORE_EXISTING_KEY" : "", + pr_reg->pr_reg_nacl->initiatorname, + pr_reg->pr_res_key, pr_reg->pr_res_generation); + + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(dev, NULL, 0); + core_scsi3_put_pr_reg(pr_reg); + printk("SPC-3 PR: Set APTPL Bit Deactivated" + " for REGISTER\n"); + return 0; + } + + ret = core_scsi3_update_and_write_aptpl(dev, + &pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) { + pr_tmpl->pr_aptpl_active = 1; + printk("SPC-3 PR: Set APTPL Bit Activated" + " for REGISTER\n"); + } + + kfree(pr_aptpl_buf); + core_scsi3_put_pr_reg(pr_reg); + } + } + return 0; +} + +unsigned char *core_scsi3_pr_dump_type(int type) +{ + switch (type) { + case PR_TYPE_WRITE_EXCLUSIVE: + return "Write Exclusive Access"; + case PR_TYPE_EXCLUSIVE_ACCESS: + return "Exclusive Access"; + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + return "Write Exclusive Access, Registrants Only"; + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + return "Exclusive Access, Registrants Only"; + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + return "Write Exclusive Access, All Registrants"; + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + return "Exclusive Access, All Registrants"; + default: + break; + } + + return "Unknown SPC-3 PR Type"; +} + +static int core_scsi3_pro_reserve( + struct se_cmd *cmd, + struct se_device *dev, + int type, + int scope, + u64 res_key) +{ + struct se_session *se_sess = SE_SESS(cmd); + struct se_dev_entry *se_deve; + struct se_lun *se_lun = SE_LUN(cmd); + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg, *pr_res_holder; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + char i_buf[PR_REG_ISID_ID_LEN]; + int ret, prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + se_tpg = se_sess->se_tpg; + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, + se_sess); + if (!(pr_reg)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for RESERVE\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * An application client creates a persistent reservation by issuing + * a PERSISTENT RESERVE OUT command with RESERVE service action through + * a registered I_T nexus with the following parameters: + * a) RESERVATION KEY set to the value of the reservation key that is + * registered with the logical unit for the I_T nexus; and + */ + if (res_key != pr_reg->pr_res_key) { + printk(KERN_ERR "SPC-3 PR RESERVE: Received res_key: 0x%016Lx" + " does not match existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, pr_reg->pr_res_key); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * From above: + * b) TYPE field and SCOPE field set to the persistent reservation + * being created. + * + * Only one persistent reservation is allowed at a time per logical unit + * and that persistent reservation has a scope of LU_SCOPE. + */ + if (scope != PR_SCOPE_LU_SCOPE) { + printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * See if we have an existing PR reservation holder pointer at + * struct se_device->dev_pr_res_holder in the form struct t10_pr_registration + * *pr_res_holder. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if ((pr_res_holder)) { + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * If the device server receives a PERSISTENT RESERVE OUT + * command from an I_T nexus other than a persistent reservation + * holder (see 5.7.10) that attempts to create a persistent + * reservation when a persistent reservation already exists for + * the logical unit, then the command shall be completed with + * RESERVATION CONFLICT status. + */ + if (pr_res_holder != pr_reg) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from" + " [%s]: %s while reservation already held by" + " [%s]: %s, returning RESERVATION_CONFLICT\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), + pr_res_holder->pr_reg_nacl->initiatorname); + + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * If a persistent reservation holder attempts to modify the + * type or scope of an existing persistent reservation, the + * command shall be completed with RESERVATION CONFLICT status. + */ + if ((pr_res_holder->pr_res_type != type) || + (pr_res_holder->pr_res_scope != scope)) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from" + " [%s]: %s trying to change TYPE and/or SCOPE," + " while reservation already held by [%s]: %s," + " returning RESERVATION_CONFLICT\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), + pr_res_holder->pr_reg_nacl->initiatorname); + + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * If the device server receives a PERSISTENT RESERVE OUT + * command with RESERVE service action where the TYPE field and + * the SCOPE field contain the same values as the existing type + * and scope from a persistent reservation holder, it shall not + * make any change to the existing persistent reservation and + * shall completethe command with GOOD status. + */ + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + } + /* + * Otherwise, our *pr_reg becomes the PR reservation holder for said + * TYPE/SCOPE. Also set the received scope and type in *pr_reg. + */ + pr_reg->pr_res_scope = scope; + pr_reg->pr_res_type = type; + pr_reg->pr_res_holder = 1; + dev->dev_pr_res_holder = pr_reg; + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: RESERVE created new" + " reservation holder TYPE: %s ALL_TG_PT: %d\n", + CMD_TFO(cmd)->get_fabric_name(), core_scsi3_pr_dump_type(type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); + spin_unlock(&dev->dev_reservation_lock); + + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata" + " for RESERVE\n"); + } + + core_scsi3_put_pr_reg(pr_reg); + return 0; +} + +static int core_scsi3_emulate_pro_reserve( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key) +{ + struct se_device *dev = cmd->se_dev; + int ret = 0; + + switch (type) { + case PR_TYPE_WRITE_EXCLUSIVE: + case PR_TYPE_EXCLUSIVE_ACCESS: + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + ret = core_scsi3_pro_reserve(cmd, dev, type, scope, res_key); + break; + default: + printk(KERN_ERR "SPC-3 PR: Unknown Service Action RESERVE Type:" + " 0x%02x\n", type); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + return ret; +} + +/* + * Called with struct se_device->dev_reservation_lock held. + */ +static void __core_scsi3_complete_pro_release( + struct se_device *dev, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int explict) +{ + struct target_core_fabric_ops *tfo = se_nacl->se_tpg->se_tpg_tfo; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + /* + * Go ahead and release the current PR reservation holder. + */ + dev->dev_pr_res_holder = NULL; + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: %s RELEASE cleared" + " reservation holder TYPE: %s ALL_TG_PT: %d\n", + tfo->get_fabric_name(), (explict) ? "explict" : "implict", + core_scsi3_pr_dump_type(pr_reg->pr_res_type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] RELEASE Node: %s%s\n", + tfo->get_fabric_name(), se_nacl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); + /* + * Clear TYPE and SCOPE for the next PROUT Service Action: RESERVE + */ + pr_reg->pr_res_holder = pr_reg->pr_res_type = pr_reg->pr_res_scope = 0; +} + +static int core_scsi3_emulate_pro_release( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *se_sess = SE_SESS(cmd); + struct se_lun *se_lun = SE_LUN(cmd); + struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_res_holder; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + int ret, all_reg = 0; + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess); + if (!(pr_reg)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for RELEASE\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * From spc4r17 Section 5.7.11.2 Releasing: + * + * If there is no persistent reservation or in response to a persistent + * reservation release request from a registered I_T nexus that is not a + * persistent reservation holder (see 5.7.10), the device server shall + * do the following: + * + * a) Not release the persistent reservation, if any; + * b) Not remove any registrations; and + * c) Complete the command with GOOD status. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (!(pr_res_holder)) { + /* + * No persistent reservation, return GOOD status. + */ + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + } + if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) + all_reg = 1; + + if ((all_reg == 0) && (pr_res_holder != pr_reg)) { + /* + * Non 'All Registrants' PR Type cases.. + * Release request from a registered I_T nexus that is not a + * persistent reservation holder. return GOOD status. + */ + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + } + /* + * From spc4r17 Section 5.7.11.2 Releasing: + * + * Only the persistent reservation holder (see 5.7.10) is allowed to + * release a persistent reservation. + * + * An application client releases the persistent reservation by issuing + * a PERSISTENT RESERVE OUT command with RELEASE service action through + * an I_T nexus that is a persistent reservation holder with the + * following parameters: + * + * a) RESERVATION KEY field set to the value of the reservation key + * that is registered with the logical unit for the I_T nexus; + */ + if (res_key != pr_reg->pr_res_key) { + printk(KERN_ERR "SPC-3 PR RELEASE: Received res_key: 0x%016Lx" + " does not match existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, pr_reg->pr_res_key); + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.11.2 Releasing and above: + * + * b) TYPE field and SCOPE field set to match the persistent + * reservation being released. + */ + if ((pr_res_holder->pr_res_type != type) || + (pr_res_holder->pr_res_scope != scope)) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + printk(KERN_ERR "SPC-3 PR RELEASE: Attempted to release" + " reservation from [%s]: %s with different TYPE " + "and/or SCOPE while reservation already held by" + " [%s]: %s, returning RESERVATION_CONFLICT\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), + pr_res_holder->pr_reg_nacl->initiatorname); + + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * In response to a persistent reservation release request from the + * persistent reservation holder the device server shall perform a + * release by doing the following as an uninterrupted series of actions: + * a) Release the persistent reservation; + * b) Not remove any registration(s); + * c) If the released persistent reservation is a registrants only type + * or all registrants type persistent reservation, + * the device server shall establish a unit attention condition for + * the initiator port associated with every regis- + * tered I_T nexus other than I_T nexus on which the PERSISTENT + * RESERVE OUT command with RELEASE service action was received, + * with the additional sense code set to RESERVATIONS RELEASED; and + * d) If the persistent reservation is of any other type, the device + * server shall not establish a unit attention condition. + */ + __core_scsi3_complete_pro_release(dev, se_sess->se_node_acl, + pr_reg, 1); + + spin_unlock(&dev->dev_reservation_lock); + + if ((type != PR_TYPE_WRITE_EXCLUSIVE_REGONLY) && + (type != PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) && + (type != PR_TYPE_WRITE_EXCLUSIVE_ALLREG) && + (type != PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { + /* + * If no UNIT ATTENTION conditions will be established for + * PR_TYPE_WRITE_EXCLUSIVE or PR_TYPE_EXCLUSIVE_ACCESS + * go ahead and check for APTPL=1 update+write below + */ + goto write_aptpl; + } + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry(pr_reg_p, &pr_tmpl->registration_list, + pr_reg_list) { + /* + * Do not establish a UNIT ATTENTION condition + * for the calling I_T Nexus + */ + if (pr_reg_p == pr_reg) + continue; + + core_scsi3_ua_allocate(pr_reg_p->pr_reg_nacl, + pr_reg_p->pr_res_mapped_lun, + 0x2A, ASCQ_2AH_RESERVATIONS_RELEASED); + } + spin_unlock(&pr_tmpl->registration_lock); + +write_aptpl: + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk("SPC-3 PR: Updated APTPL metadata for RELEASE\n"); + } + + core_scsi3_put_pr_reg(pr_reg); + return 0; +} + +static int core_scsi3_emulate_pro_clear( + struct se_cmd *cmd, + u64 res_key) +{ + struct se_device *dev = cmd->se_dev; + struct se_node_acl *pr_reg_nacl; + struct se_session *se_sess = SE_SESS(cmd); + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; + u32 pr_res_mapped_lun = 0; + int calling_it_nexus = 0; + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), + se_sess->se_node_acl, se_sess); + if (!(pr_reg_n)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for CLEAR\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * From spc4r17 section 5.7.11.6, Clearing: + * + * Any application client may release the persistent reservation and + * remove all registrations from a device server by issuing a + * PERSISTENT RESERVE OUT command with CLEAR service action through a + * registered I_T nexus with the following parameter: + * + * a) RESERVATION KEY field set to the value of the reservation key + * that is registered with the logical unit for the I_T nexus. + */ + if (res_key != pr_reg_n->pr_res_key) { + printk(KERN_ERR "SPC-3 PR REGISTER: Received" + " res_key: 0x%016Lx does not match" + " existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * a) Release the persistent reservation, if any; + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (pr_res_holder) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + __core_scsi3_complete_pro_release(dev, pr_res_nacl, + pr_res_holder, 0); + } + spin_unlock(&dev->dev_reservation_lock); + /* + * b) Remove all registration(s) (see spc4r17 5.7.7); + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, NULL, + calling_it_nexus); + /* + * e) Establish a unit attention condition for the initiator + * port associated with every registered I_T nexus other + * than the I_T nexus on which the PERSISTENT RESERVE OUT + * command with CLEAR service action was received, with the + * additional sense code set to RESERVATIONS PREEMPTED. + */ + if (!(calling_it_nexus)) + core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, + 0x2A, ASCQ_2AH_RESERVATIONS_PREEMPTED); + } + spin_unlock(&pr_tmpl->registration_lock); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: CLEAR complete\n", + CMD_TFO(cmd)->get_fabric_name()); + + if (pr_tmpl->pr_aptpl_active) { + core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); + printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata" + " for CLEAR\n"); + } + + core_scsi3_pr_generation(dev); + return 0; +} + +/* + * Called with struct se_device->dev_reservation_lock held. + */ +static void __core_scsi3_complete_pro_preempt( + struct se_device *dev, + struct t10_pr_registration *pr_reg, + struct list_head *preempt_and_abort_list, + int type, + int scope, + int abort) +{ + struct se_node_acl *nacl = pr_reg->pr_reg_nacl; + struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + /* + * Do an implict RELEASE of the existing reservation. + */ + if (dev->dev_pr_res_holder) + __core_scsi3_complete_pro_release(dev, nacl, + dev->dev_pr_res_holder, 0); + + dev->dev_pr_res_holder = pr_reg; + pr_reg->pr_res_holder = 1; + pr_reg->pr_res_type = type; + pr_reg->pr_res_scope = scope; + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: PREEMPT%s created new" + " reservation holder TYPE: %s ALL_TG_PT: %d\n", + tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "", + core_scsi3_pr_dump_type(type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] PREEMPT%s from Node: %s%s\n", + tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "", + nacl->initiatorname, (prf_isid) ? &i_buf[0] : ""); + /* + * For PREEMPT_AND_ABORT, add the preempting reservation's + * struct t10_pr_registration to the list that will be compared + * against received CDBs.. + */ + if (preempt_and_abort_list) + list_add_tail(&pr_reg->pr_reg_abort_list, + preempt_and_abort_list); +} + +static void core_scsi3_release_preempt_and_abort( + struct list_head *preempt_and_abort_list, + struct t10_pr_registration *pr_reg_holder) +{ + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + + list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list, + pr_reg_abort_list) { + + list_del(&pr_reg->pr_reg_abort_list); + if (pr_reg_holder == pr_reg) + continue; + if (pr_reg->pr_res_holder) { + printk(KERN_WARNING "pr_reg->pr_res_holder still set\n"); + continue; + } + + pr_reg->pr_reg_deve = NULL; + pr_reg->pr_reg_nacl = NULL; + kfree(pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + } +} + +int core_scsi3_check_cdb_abort_and_preempt( + struct list_head *preempt_and_abort_list, + struct se_cmd *cmd) +{ + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + + list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list, + pr_reg_abort_list) { + if (pr_reg->pr_res_key == cmd->pr_res_key) + return 0; + } + + return 1; +} + +static int core_scsi3_pro_preempt( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key, + u64 sa_res_key, + int abort) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *se_deve; + struct se_node_acl *pr_reg_nacl; + struct se_session *se_sess = SE_SESS(cmd); + struct list_head preempt_and_abort_list; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + u32 pr_res_mapped_lun = 0; + int all_reg = 0, calling_it_nexus = 0, released_regs = 0; + int prh_type = 0, prh_scope = 0, ret; + + if (!(se_sess)) + return PYX_TRANSPORT_LU_COMM_FAILURE; + + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, + se_sess); + if (!(pr_reg_n)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for PREEMPT%s\n", + (abort) ? "_AND_ABORT" : ""); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + if (pr_reg_n->pr_res_key != res_key) { + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + if (scope != PR_SCOPE_LU_SCOPE) { + printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + INIT_LIST_HEAD(&preempt_and_abort_list); + + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (pr_res_holder && + ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))) + all_reg = 1; + + if (!(all_reg) && !(sa_res_key)) { + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * From spc4r17, section 5.7.11.4.4 Removing Registrations: + * + * If the SERVICE ACTION RESERVATION KEY field does not identify a + * persistent reservation holder or there is no persistent reservation + * holder (i.e., there is no persistent reservation), then the device + * server shall perform a preempt by doing the following in an + * uninterrupted series of actions. (See below..) + */ + if (!(pr_res_holder) || (pr_res_holder->pr_res_key != sa_res_key)) { + /* + * No existing or SA Reservation Key matching reservations.. + * + * PROUT SA PREEMPT with All Registrant type reservations are + * allowed to be processed without a matching SA Reservation Key + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + /* + * Removing of registrations in non all registrants + * type reservations without a matching SA reservation + * key. + * + * a) Remove the registrations for all I_T nexuses + * specified by the SERVICE ACTION RESERVATION KEY + * field; + * b) Ignore the contents of the SCOPE and TYPE fields; + * c) Process tasks as defined in 5.7.1; and + * d) Establish a unit attention condition for the + * initiator port associated with every I_T nexus + * that lost its registration other than the I_T + * nexus on which the PERSISTENT RESERVE OUT command + * was received, with the additional sense code set + * to REGISTRATIONS PREEMPTED. + */ + if (!(all_reg)) { + if (pr_reg->pr_res_key != sa_res_key) + continue; + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, + (abort) ? &preempt_and_abort_list : + NULL, calling_it_nexus); + released_regs++; + } else { + /* + * Case for any existing all registrants type + * reservation, follow logic in spc4r17 section + * 5.7.11.4 Preempting, Table 52 and Figure 7. + * + * For a ZERO SA Reservation key, release + * all other registrations and do an implict + * release of active persistent reservation. + * + * For a non-ZERO SA Reservation key, only + * release the matching reservation key from + * registrations. + */ + if ((sa_res_key) && + (pr_reg->pr_res_key != sa_res_key)) + continue; + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + if (calling_it_nexus) + continue; + + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, + (abort) ? &preempt_and_abort_list : + NULL, 0); + released_regs++; + } + if (!(calling_it_nexus)) + core_scsi3_ua_allocate(pr_reg_nacl, + pr_res_mapped_lun, 0x2A, + ASCQ_2AH_RESERVATIONS_PREEMPTED); + } + spin_unlock(&pr_tmpl->registration_lock); + /* + * If a PERSISTENT RESERVE OUT with a PREEMPT service action or + * a PREEMPT AND ABORT service action sets the SERVICE ACTION + * RESERVATION KEY field to a value that does not match any + * registered reservation key, then the device server shall + * complete the command with RESERVATION CONFLICT status. + */ + if (!(released_regs)) { + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * For an existing all registrants type reservation + * with a zero SA rservation key, preempt the existing + * reservation with the new PR type and scope. + */ + if (pr_res_holder && all_reg && !(sa_res_key)) { + __core_scsi3_complete_pro_preempt(dev, pr_reg_n, + (abort) ? &preempt_and_abort_list : NULL, + type, scope, abort); + + if (abort) + core_scsi3_release_preempt_and_abort( + &preempt_and_abort_list, pr_reg_n); + } + spin_unlock(&dev->dev_reservation_lock); + + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg_n->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk(KERN_INFO "SPC-3 PR: Updated APTPL" + " metadata for PREEMPT%s\n", (abort) ? + "_AND_ABORT" : ""); + } + + core_scsi3_put_pr_reg(pr_reg_n); + core_scsi3_pr_generation(SE_DEV(cmd)); + return 0; + } + /* + * The PREEMPTing SA reservation key matches that of the + * existing persistent reservation, first, we check if + * we are preempting our own reservation. + * From spc4r17, section 5.7.11.4.3 Preempting + * persistent reservations and registration handling + * + * If an all registrants persistent reservation is not + * present, it is not an error for the persistent + * reservation holder to preempt itself (i.e., a + * PERSISTENT RESERVE OUT with a PREEMPT service action + * or a PREEMPT AND ABORT service action with the + * SERVICE ACTION RESERVATION KEY value equal to the + * persistent reservation holder's reservation key that + * is received from the persistent reservation holder). + * In that case, the device server shall establish the + * new persistent reservation and maintain the + * registration. + */ + prh_type = pr_res_holder->pr_res_type; + prh_scope = pr_res_holder->pr_res_scope; + /* + * If the SERVICE ACTION RESERVATION KEY field identifies a + * persistent reservation holder (see 5.7.10), the device + * server shall perform a preempt by doing the following as + * an uninterrupted series of actions: + * + * a) Release the persistent reservation for the holder + * identified by the SERVICE ACTION RESERVATION KEY field; + */ + if (pr_reg_n != pr_res_holder) + __core_scsi3_complete_pro_release(dev, + pr_res_holder->pr_reg_nacl, + dev->dev_pr_res_holder, 0); + /* + * b) Remove the registrations for all I_T nexuses identified + * by the SERVICE ACTION RESERVATION KEY field, except the + * I_T nexus that is being used for the PERSISTENT RESERVE + * OUT command. If an all registrants persistent reservation + * is present and the SERVICE ACTION RESERVATION KEY field + * is set to zero, then all registrations shall be removed + * except for that of the I_T nexus that is being used for + * the PERSISTENT RESERVE OUT command; + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + if (calling_it_nexus) + continue; + + if (pr_reg->pr_res_key != sa_res_key) + continue; + + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, + (abort) ? &preempt_and_abort_list : NULL, + calling_it_nexus); + /* + * e) Establish a unit attention condition for the initiator + * port associated with every I_T nexus that lost its + * persistent reservation and/or registration, with the + * additional sense code set to REGISTRATIONS PREEMPTED; + */ + core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, + ASCQ_2AH_RESERVATIONS_PREEMPTED); + } + spin_unlock(&pr_tmpl->registration_lock); + /* + * c) Establish a persistent reservation for the preempting + * I_T nexus using the contents of the SCOPE and TYPE fields; + */ + __core_scsi3_complete_pro_preempt(dev, pr_reg_n, + (abort) ? &preempt_and_abort_list : NULL, + type, scope, abort); + /* + * d) Process tasks as defined in 5.7.1; + * e) See above.. + * f) If the type or scope has changed, then for every I_T nexus + * whose reservation key was not removed, except for the I_T + * nexus on which the PERSISTENT RESERVE OUT command was + * received, the device server shall establish a unit + * attention condition for the initiator port associated with + * that I_T nexus, with the additional sense code set to + * RESERVATIONS RELEASED. If the type or scope have not + * changed, then no unit attention condition(s) shall be + * established for this reason. + */ + if ((prh_type != type) || (prh_scope != scope)) { + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + if (calling_it_nexus) + continue; + + core_scsi3_ua_allocate(pr_reg->pr_reg_nacl, + pr_reg->pr_res_mapped_lun, 0x2A, + ASCQ_2AH_RESERVATIONS_RELEASED); + } + spin_unlock(&pr_tmpl->registration_lock); + } + spin_unlock(&dev->dev_reservation_lock); + /* + * Call LUN_RESET logic upon list of struct t10_pr_registration, + * All received CDBs for the matching existing reservation and + * registrations undergo ABORT_TASK logic. + * + * From there, core_scsi3_release_preempt_and_abort() will + * release every registration in the list (which have already + * been removed from the primary pr_reg list), except the + * new persistent reservation holder, the calling Initiator Port. + */ + if (abort) { + core_tmr_lun_reset(dev, NULL, &preempt_and_abort_list, cmd); + core_scsi3_release_preempt_and_abort(&preempt_and_abort_list, + pr_reg_n); + } + + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg_n->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk("SPC-3 PR: Updated APTPL metadata for PREEMPT" + "%s\n", (abort) ? "_AND_ABORT" : ""); + } + + core_scsi3_put_pr_reg(pr_reg_n); + core_scsi3_pr_generation(SE_DEV(cmd)); + return 0; +} + +static int core_scsi3_emulate_pro_preempt( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key, + u64 sa_res_key, + int abort) +{ + int ret = 0; + + switch (type) { + case PR_TYPE_WRITE_EXCLUSIVE: + case PR_TYPE_EXCLUSIVE_ACCESS: + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + ret = core_scsi3_pro_preempt(cmd, type, scope, + res_key, sa_res_key, abort); + break; + default: + printk(KERN_ERR "SPC-3 PR: Unknown Service Action PREEMPT%s" + " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + return ret; +} + + +static int core_scsi3_emulate_pro_register_and_move( + struct se_cmd *cmd, + u64 res_key, + u64 sa_res_key, + int aptpl, + int unreg) +{ + struct se_session *se_sess = SE_SESS(cmd); + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *se_deve, *dest_se_deve = NULL; + struct se_lun *se_lun = SE_LUN(cmd); + struct se_node_acl *pr_res_nacl, *pr_reg_nacl, *dest_node_acl = NULL; + struct se_port *se_port; + struct se_portal_group *se_tpg, *dest_se_tpg = NULL; + struct target_core_fabric_ops *dest_tf_ops = NULL, *tf_ops; + struct t10_pr_registration *pr_reg, *pr_res_holder, *dest_pr_reg; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + unsigned char *initiator_str; + char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN]; + u32 tid_len, tmp_tid_len; + int new_reg = 0, type, scope, ret, matching_iname, prf_isid; + unsigned short rtpi; + unsigned char proto_ident; + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + memset(dest_iport, 0, 64); + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + se_tpg = se_sess->se_tpg; + tf_ops = TPG_TFO(se_tpg); + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Follow logic from spc4r17 Section 5.7.8, Table 50 -- + * Register behaviors for a REGISTER AND MOVE service action + * + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, + se_sess); + if (!(pr_reg)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate PR_REGISTERED" + " *pr_reg for REGISTER_AND_MOVE\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * The provided reservation key much match the existing reservation key + * provided during this initiator's I_T nexus registration. + */ + if (res_key != pr_reg->pr_res_key) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received" + " res_key: 0x%016Lx does not match existing SA REGISTER" + " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * The service active reservation key needs to be non zero + */ + if (!(sa_res_key)) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received zero" + " sa_res_key\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * Determine the Relative Target Port Identifier where the reservation + * will be moved to for the TransportID containing SCSI initiator WWN + * information. + */ + rtpi = (buf[18] & 0xff) << 8; + rtpi |= buf[19] & 0xff; + tid_len = (buf[20] & 0xff) << 24; + tid_len |= (buf[21] & 0xff) << 16; + tid_len |= (buf[22] & 0xff) << 8; + tid_len |= buf[23] & 0xff; + + if ((tid_len + 24) != cmd->data_length) { + printk(KERN_ERR "SPC-3 PR: Illegal tid_len: %u + 24 byte header" + " does not equal CDB data_length: %u\n", tid_len, + cmd->data_length); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + + spin_lock(&dev->se_port_lock); + list_for_each_entry(se_port, &dev->dev_sep_list, sep_list) { + if (se_port->sep_rtpi != rtpi) + continue; + dest_se_tpg = se_port->sep_tpg; + if (!(dest_se_tpg)) + continue; + dest_tf_ops = TPG_TFO(dest_se_tpg); + if (!(dest_tf_ops)) + continue; + + atomic_inc(&dest_se_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock(&dev->se_port_lock); + + ret = core_scsi3_tpg_depend_item(dest_se_tpg); + if (ret != 0) { + printk(KERN_ERR "core_scsi3_tpg_depend_item() failed" + " for dest_se_tpg\n"); + atomic_dec(&dest_se_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + + spin_lock(&dev->se_port_lock); + break; + } + spin_unlock(&dev->se_port_lock); + + if (!(dest_se_tpg) || (!dest_tf_ops)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate" + " fabric ops from Relative Target Port Identifier:" + " %hu\n", rtpi); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + proto_ident = (buf[24] & 0x0f); +#if 0 + printk("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:" + " 0x%02x\n", proto_ident); +#endif + if (proto_ident != dest_tf_ops->get_fabric_proto_ident(dest_se_tpg)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Received" + " proto_ident: 0x%02x does not match ident: 0x%02x" + " from fabric: %s\n", proto_ident, + dest_tf_ops->get_fabric_proto_ident(dest_se_tpg), + dest_tf_ops->get_fabric_name()); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Fabric does not" + " containg a valid tpg_parse_pr_out_transport_id" + " function pointer\n"); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg, + (const char *)&buf[24], &tmp_tid_len, &iport_ptr); + if (!(initiator_str)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate" + " initiator_str from Transport ID\n"); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + + printk(KERN_INFO "SPC-3 PR [%s] Extracted initiator %s identifier: %s" + " %s\n", dest_tf_ops->get_fabric_name(), (iport_ptr != NULL) ? + "port" : "device", initiator_str, (iport_ptr != NULL) ? + iport_ptr : ""); + /* + * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service + * action specifies a TransportID that is the same as the initiator port + * of the I_T nexus for the command received, then the command shall + * be terminated with CHECK CONDITION status, with the sense key set to + * ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD + * IN PARAMETER LIST. + */ + pr_reg_nacl = pr_reg->pr_reg_nacl; + matching_iname = (!strcmp(initiator_str, + pr_reg_nacl->initiatorname)) ? 1 : 0; + if (!(matching_iname)) + goto after_iport_check; + + if (!(iport_ptr) || !(pr_reg->isid_present_at_reg)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" + " matches: %s on received I_T Nexus\n", initiator_str, + pr_reg_nacl->initiatorname); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + if (!(strcmp(iport_ptr, pr_reg->pr_reg_isid))) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s" + " matches: %s %s on received I_T Nexus\n", + initiator_str, iport_ptr, pr_reg_nacl->initiatorname, + pr_reg->pr_reg_isid); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } +after_iport_check: + /* + * Locate the destination struct se_node_acl from the received Transport ID + */ + spin_lock_bh(&dest_se_tpg->acl_node_lock); + dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg, + initiator_str); + if (dest_node_acl) { + atomic_inc(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_inc(); + } + spin_unlock_bh(&dest_se_tpg->acl_node_lock); + + if (!(dest_node_acl)) { + printk(KERN_ERR "Unable to locate %s dest_node_acl for" + " TransportID%s\n", dest_tf_ops->get_fabric_name(), + initiator_str); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + ret = core_scsi3_nodeacl_depend_item(dest_node_acl); + if (ret != 0) { + printk(KERN_ERR "core_scsi3_nodeacl_depend_item() for" + " dest_node_acl\n"); + atomic_dec(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); + dest_node_acl = NULL; + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } +#if 0 + printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Found %s dest_node_acl:" + " %s from TransportID\n", dest_tf_ops->get_fabric_name(), + dest_node_acl->initiatorname); +#endif + /* + * Locate the struct se_dev_entry pointer for the matching RELATIVE TARGET + * PORT IDENTIFIER. + */ + dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, rtpi); + if (!(dest_se_deve)) { + printk(KERN_ERR "Unable to locate %s dest_se_deve from RTPI:" + " %hu\n", dest_tf_ops->get_fabric_name(), rtpi); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + + ret = core_scsi3_lunacl_depend_item(dest_se_deve); + if (ret < 0) { + printk(KERN_ERR "core_scsi3_lunacl_depend_item() failed\n"); + atomic_dec(&dest_se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); + dest_se_deve = NULL; + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } +#if 0 + printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Located %s node %s LUN" + " ACL for dest_se_deve->mapped_lun: %u\n", + dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname, + dest_se_deve->mapped_lun); +#endif + /* + * A persistent reservation needs to already existing in order to + * successfully complete the REGISTER_AND_MOVE service action.. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (!(pr_res_holder)) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: No reservation" + " currently held\n"); + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + goto out; + } + /* + * The received on I_T Nexus must be the reservation holder. + * + * From spc4r17 section 5.7.8 Table 50 -- + * Register behaviors for a REGISTER AND MOVE service action + */ + if (pr_res_holder != pr_reg) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Calling I_T" + " Nexus is not reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + goto out; + } + /* + * From spc4r17 section 5.7.8: registering and moving reservation + * + * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service + * action is received and the established persistent reservation is a + * Write Exclusive - All Registrants type or Exclusive Access - + * All Registrants type reservation, then the command shall be completed + * with RESERVATION CONFLICT status. + */ + if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Unable to move" + " reservation for type: %s\n", + core_scsi3_pr_dump_type(pr_res_holder->pr_res_type)); + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + goto out; + } + pr_res_nacl = pr_res_holder->pr_reg_nacl; + /* + * b) Ignore the contents of the (received) SCOPE and TYPE fields; + */ + type = pr_res_holder->pr_res_type; + scope = pr_res_holder->pr_res_type; + /* + * c) Associate the reservation key specified in the SERVICE ACTION + * RESERVATION KEY field with the I_T nexus specified as the + * destination of the register and move, where: + * A) The I_T nexus is specified by the TransportID and the + * RELATIVE TARGET PORT IDENTIFIER field (see 6.14.4); and + * B) Regardless of the TransportID format used, the association for + * the initiator port is based on either the initiator port name + * (see 3.1.71) on SCSI transport protocols where port names are + * required or the initiator port identifier (see 3.1.70) on SCSI + * transport protocols where port names are not required; + * d) Register the reservation key specified in the SERVICE ACTION + * RESERVATION KEY field; + * e) Retain the reservation key specified in the SERVICE ACTION + * RESERVATION KEY field and associated information; + * + * Also, It is not an error for a REGISTER AND MOVE service action to + * register an I_T nexus that is already registered with the same + * reservation key or a different reservation key. + */ + dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, + iport_ptr); + if (!(dest_pr_reg)) { + ret = core_scsi3_alloc_registration(SE_DEV(cmd), + dest_node_acl, dest_se_deve, iport_ptr, + sa_res_key, 0, aptpl, 2, 1); + if (ret != 0) { + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, + iport_ptr); + new_reg = 1; + } + /* + * f) Release the persistent reservation for the persistent reservation + * holder (i.e., the I_T nexus on which the + */ + __core_scsi3_complete_pro_release(dev, pr_res_nacl, + dev->dev_pr_res_holder, 0); + /* + * g) Move the persistent reservation to the specified I_T nexus using + * the same scope and type as the persistent reservation released in + * item f); and + */ + dev->dev_pr_res_holder = dest_pr_reg; + dest_pr_reg->pr_res_holder = 1; + dest_pr_reg->pr_res_type = type; + pr_reg->pr_res_scope = scope; + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + /* + * Increment PRGeneration for existing registrations.. + */ + if (!(new_reg)) + dest_pr_reg->pr_res_generation = pr_tmpl->pr_generation++; + spin_unlock(&dev->dev_reservation_lock); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER_AND_MOVE" + " created new reservation holder TYPE: %s on object RTPI:" + " %hu PRGeneration: 0x%08x\n", dest_tf_ops->get_fabric_name(), + core_scsi3_pr_dump_type(type), rtpi, + dest_pr_reg->pr_res_generation); + printk(KERN_INFO "SPC-3 PR Successfully moved reservation from" + " %s Fabric Node: %s%s -> %s Fabric Node: %s %s\n", + tf_ops->get_fabric_name(), pr_reg_nacl->initiatorname, + (prf_isid) ? &i_buf[0] : "", dest_tf_ops->get_fabric_name(), + dest_node_acl->initiatorname, (iport_ptr != NULL) ? + iport_ptr : ""); + /* + * It is now safe to release configfs group dependencies for destination + * of Transport ID Initiator Device/Port Identifier + */ + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_se_tpg); + /* + * h) If the UNREG bit is set to one, unregister (see 5.7.11.3) the I_T + * nexus on which PERSISTENT RESERVE OUT command was received. + */ + if (unreg) { + spin_lock(&pr_tmpl->registration_lock); + __core_scsi3_free_registration(dev, pr_reg, NULL, 1); + spin_unlock(&pr_tmpl->registration_lock); + } else + core_scsi3_put_pr_reg(pr_reg); + + /* + * Clear the APTPL metadata if APTPL has been disabled, otherwise + * write out the updated metadata to struct file for this SCSI device. + */ + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); + printk("SPC-3 PR: Set APTPL Bit Deactivated for" + " REGISTER_AND_MOVE\n"); + } else { + pr_tmpl->pr_aptpl_active = 1; + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &dest_pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk("SPC-3 PR: Set APTPL Bit Activated for" + " REGISTER_AND_MOVE\n"); + } + + core_scsi3_put_pr_reg(dest_pr_reg); + return 0; +out: + if (dest_se_deve) + core_scsi3_lunacl_undepend_item(dest_se_deve); + if (dest_node_acl) + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_se_tpg); + core_scsi3_put_pr_reg(pr_reg); + return ret; +} + +static unsigned long long core_scsi3_extract_reservation_key(unsigned char *cdb) +{ + unsigned int __v1, __v2; + + __v1 = (cdb[0] << 24) | (cdb[1] << 16) | (cdb[2] << 8) | cdb[3]; + __v2 = (cdb[4] << 24) | (cdb[5] << 16) | (cdb[6] << 8) | cdb[7]; + + return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; +} + +/* + * See spc4r17 section 6.14 Table 170 + */ +static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb) +{ + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u64 res_key, sa_res_key; + int sa, scope, type, aptpl; + int spec_i_pt = 0, all_tg_pt = 0, unreg = 0; + /* + * FIXME: A NULL struct se_session pointer means an this is not coming from + * a $FABRIC_MOD's nexus, but from internal passthrough ops. + */ + if (!(SE_SESS(cmd))) + return PYX_TRANSPORT_LU_COMM_FAILURE; + + if (cmd->data_length < 24) { + printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list" + " length too small: %u\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * From the PERSISTENT_RESERVE_OUT command descriptor block (CDB) + */ + sa = (cdb[1] & 0x1f); + scope = (cdb[2] & 0xf0); + type = (cdb[2] & 0x0f); + /* + * From PERSISTENT_RESERVE_OUT parameter list (payload) + */ + res_key = core_scsi3_extract_reservation_key(&buf[0]); + sa_res_key = core_scsi3_extract_reservation_key(&buf[8]); + /* + * REGISTER_AND_MOVE uses a different SA parameter list containing + * SCSI TransportIDs. + */ + if (sa != PRO_REGISTER_AND_MOVE) { + spec_i_pt = (buf[20] & 0x08); + all_tg_pt = (buf[20] & 0x04); + aptpl = (buf[20] & 0x01); + } else { + aptpl = (buf[17] & 0x01); + unreg = (buf[17] & 0x02); + } + /* + * SPEC_I_PT=1 is only valid for Service action: REGISTER + */ + if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + /* + * From spc4r17 section 6.14: + * + * If the SPEC_I_PT bit is set to zero, the service action is not + * REGISTER AND MOVE, and the parameter list length is not 24, then + * the command shall be terminated with CHECK CONDITION status, with + * the sense key set to ILLEGAL REQUEST, and the additional sense + * code set to PARAMETER LIST LENGTH ERROR. + */ + if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) && + (cmd->data_length != 24)) { + printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter" + " list length: %u\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * (core_scsi3_emulate_pro_* function parameters + * are defined by spc4r17 Table 174: + * PERSISTENT_RESERVE_OUT service actions and valid parameters. + */ + switch (sa) { + case PRO_REGISTER: + return core_scsi3_emulate_pro_register(cmd, + res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0); + case PRO_RESERVE: + return core_scsi3_emulate_pro_reserve(cmd, + type, scope, res_key); + case PRO_RELEASE: + return core_scsi3_emulate_pro_release(cmd, + type, scope, res_key); + case PRO_CLEAR: + return core_scsi3_emulate_pro_clear(cmd, res_key); + case PRO_PREEMPT: + return core_scsi3_emulate_pro_preempt(cmd, type, scope, + res_key, sa_res_key, 0); + case PRO_PREEMPT_AND_ABORT: + return core_scsi3_emulate_pro_preempt(cmd, type, scope, + res_key, sa_res_key, 1); + case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: + return core_scsi3_emulate_pro_register(cmd, + 0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1); + case PRO_REGISTER_AND_MOVE: + return core_scsi3_emulate_pro_register_and_move(cmd, res_key, + sa_res_key, aptpl, unreg); + default: + printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service" + " action: 0x%02x\n", cdb[1] & 0x1f); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + return PYX_TRANSPORT_INVALID_CDB_FIELD; +} + +/* + * PERSISTENT_RESERVE_IN Service Action READ_KEYS + * + * See spc4r17 section 5.7.6.2 and section 6.13.2, Table 160 + */ +static int core_scsi3_pri_read_keys(struct se_cmd *cmd) +{ + struct se_device *se_dev = SE_DEV(cmd); + struct se_subsystem_dev *su_dev = SU_DEV(se_dev); + struct t10_pr_registration *pr_reg; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u32 add_len = 0, off = 8; + + if (cmd->data_length < 8) { + printk(KERN_ERR "PRIN SA READ_KEYS SCSI Data Length: %u" + " too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); + buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); + buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); + buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); + + spin_lock(&T10_RES(su_dev)->registration_lock); + list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, + pr_reg_list) { + /* + * Check for overflow of 8byte PRI READ_KEYS payload and + * next reservation key list descriptor. + */ + if ((add_len + 8) > (cmd->data_length - 8)) + break; + + buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff); + buf[off++] = (pr_reg->pr_res_key & 0xff); + + add_len += 8; + } + spin_unlock(&T10_RES(su_dev)->registration_lock); + + buf[4] = ((add_len >> 24) & 0xff); + buf[5] = ((add_len >> 16) & 0xff); + buf[6] = ((add_len >> 8) & 0xff); + buf[7] = (add_len & 0xff); + + return 0; +} + +/* + * PERSISTENT_RESERVE_IN Service Action READ_RESERVATION + * + * See spc4r17 section 5.7.6.3 and section 6.13.3.2 Table 161 and 162 + */ +static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) +{ + struct se_device *se_dev = SE_DEV(cmd); + struct se_subsystem_dev *su_dev = SU_DEV(se_dev); + struct t10_pr_registration *pr_reg; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u64 pr_res_key; + u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */ + + if (cmd->data_length < 8) { + printk(KERN_ERR "PRIN SA READ_RESERVATIONS SCSI Data Length: %u" + " too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); + buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); + buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); + buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); + + spin_lock(&se_dev->dev_reservation_lock); + pr_reg = se_dev->dev_pr_res_holder; + if ((pr_reg)) { + /* + * Set the hardcoded Additional Length + */ + buf[4] = ((add_len >> 24) & 0xff); + buf[5] = ((add_len >> 16) & 0xff); + buf[6] = ((add_len >> 8) & 0xff); + buf[7] = (add_len & 0xff); + + if (cmd->data_length < 22) { + spin_unlock(&se_dev->dev_reservation_lock); + return 0; + } + /* + * Set the Reservation key. + * + * From spc4r17, section 5.7.10: + * A persistent reservation holder has its reservation key + * returned in the parameter data from a PERSISTENT + * RESERVE IN command with READ RESERVATION service action as + * follows: + * a) For a persistent reservation of the type Write Exclusive + * - All Registrants or Exclusive Access All Regitrants, + * the reservation key shall be set to zero; or + * b) For all other persistent reservation types, the + * reservation key shall be set to the registered + * reservation key for the I_T nexus that holds the + * persistent reservation. + */ + if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) + pr_res_key = 0; + else + pr_res_key = pr_reg->pr_res_key; + + buf[8] = ((pr_res_key >> 56) & 0xff); + buf[9] = ((pr_res_key >> 48) & 0xff); + buf[10] = ((pr_res_key >> 40) & 0xff); + buf[11] = ((pr_res_key >> 32) & 0xff); + buf[12] = ((pr_res_key >> 24) & 0xff); + buf[13] = ((pr_res_key >> 16) & 0xff); + buf[14] = ((pr_res_key >> 8) & 0xff); + buf[15] = (pr_res_key & 0xff); + /* + * Set the SCOPE and TYPE + */ + buf[21] = (pr_reg->pr_res_scope & 0xf0) | + (pr_reg->pr_res_type & 0x0f); + } + spin_unlock(&se_dev->dev_reservation_lock); + + return 0; +} + +/* + * PERSISTENT_RESERVE_IN Service Action REPORT_CAPABILITIES + * + * See spc4r17 section 6.13.4 Table 165 + */ +static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u16 add_len = 8; /* Hardcoded to 8. */ + + if (cmd->data_length < 6) { + printk(KERN_ERR "PRIN SA REPORT_CAPABILITIES SCSI Data Length:" + " %u too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((add_len << 8) & 0xff); + buf[1] = (add_len & 0xff); + buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */ + buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */ + buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */ + buf[2] |= 0x01; /* PTPL_C: Persistence across Target Power Loss bit */ + /* + * We are filling in the PERSISTENT RESERVATION TYPE MASK below, so + * set the TMV: Task Mask Valid bit. + */ + buf[3] |= 0x80; + /* + * Change ALLOW COMMANDs to 0x20 or 0x40 later from Table 166 + */ + buf[3] |= 0x10; /* ALLOW COMMANDs field 001b */ + /* + * PTPL_A: Persistence across Target Power Loss Active bit + */ + if (pr_tmpl->pr_aptpl_active) + buf[3] |= 0x01; + /* + * Setup the PERSISTENT RESERVATION TYPE MASK from Table 167 + */ + buf[4] |= 0x80; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ + buf[4] |= 0x40; /* PR_TYPE_EXCLUSIVE_ACCESS_REGONLY */ + buf[4] |= 0x20; /* PR_TYPE_WRITE_EXCLUSIVE_REGONLY */ + buf[4] |= 0x08; /* PR_TYPE_EXCLUSIVE_ACCESS */ + buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ + buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ + + return 0; +} + +/* + * PERSISTENT_RESERVE_IN Service Action READ_FULL_STATUS + * + * See spc4r17 section 6.13.5 Table 168 and 169 + */ +static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) +{ + struct se_device *se_dev = SE_DEV(cmd); + struct se_node_acl *se_nacl; + struct se_subsystem_dev *su_dev = SU_DEV(se_dev); + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + struct t10_reservation_template *pr_tmpl = &SU_DEV(se_dev)->t10_reservation; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u32 add_desc_len = 0, add_len = 0, desc_len, exp_desc_len; + u32 off = 8; /* off into first Full Status descriptor */ + int format_code = 0; + + if (cmd->data_length < 8) { + printk(KERN_ERR "PRIN SA READ_FULL_STATUS SCSI Data Length: %u" + " too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); + buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); + buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); + buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + se_nacl = pr_reg->pr_reg_nacl; + se_tpg = pr_reg->pr_reg_nacl->se_tpg; + add_desc_len = 0; + + atomic_inc(&pr_reg->pr_res_holders); + smp_mb__after_atomic_inc(); + spin_unlock(&pr_tmpl->registration_lock); + /* + * Determine expected length of $FABRIC_MOD specific + * TransportID full status descriptor.. + */ + exp_desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id_len( + se_tpg, se_nacl, pr_reg, &format_code); + + if ((exp_desc_len + add_len) > cmd->data_length) { + printk(KERN_WARNING "SPC-3 PRIN READ_FULL_STATUS ran" + " out of buffer: %d\n", cmd->data_length); + spin_lock(&pr_tmpl->registration_lock); + atomic_dec(&pr_reg->pr_res_holders); + smp_mb__after_atomic_dec(); + break; + } + /* + * Set RESERVATION KEY + */ + buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff); + buf[off++] = (pr_reg->pr_res_key & 0xff); + off += 4; /* Skip Over Reserved area */ + + /* + * Set ALL_TG_PT bit if PROUT SA REGISTER had this set. + */ + if (pr_reg->pr_reg_all_tg_pt) + buf[off] = 0x02; + /* + * The struct se_lun pointer will be present for the + * reservation holder for PR_HOLDER bit. + * + * Also, if this registration is the reservation + * holder, fill in SCOPE and TYPE in the next byte. + */ + if (pr_reg->pr_res_holder) { + buf[off++] |= 0x01; + buf[off++] = (pr_reg->pr_res_scope & 0xf0) | + (pr_reg->pr_res_type & 0x0f); + } else + off += 2; + + off += 4; /* Skip over reserved area */ + /* + * From spc4r17 6.3.15: + * + * If the ALL_TG_PT bit set to zero, the RELATIVE TARGET PORT + * IDENTIFIER field contains the relative port identifier (see + * 3.1.120) of the target port that is part of the I_T nexus + * described by this full status descriptor. If the ALL_TG_PT + * bit is set to one, the contents of the RELATIVE TARGET PORT + * IDENTIFIER field are not defined by this standard. + */ + if (!(pr_reg->pr_reg_all_tg_pt)) { + struct se_port *port = pr_reg->pr_reg_tg_pt_lun->lun_sep; + + buf[off++] = ((port->sep_rtpi >> 8) & 0xff); + buf[off++] = (port->sep_rtpi & 0xff); + } else + off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */ + + /* + * Now, have the $FABRIC_MOD fill in the protocol identifier + */ + desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id(se_tpg, + se_nacl, pr_reg, &format_code, &buf[off+4]); + + spin_lock(&pr_tmpl->registration_lock); + atomic_dec(&pr_reg->pr_res_holders); + smp_mb__after_atomic_dec(); + /* + * Set the ADDITIONAL DESCRIPTOR LENGTH + */ + buf[off++] = ((desc_len >> 24) & 0xff); + buf[off++] = ((desc_len >> 16) & 0xff); + buf[off++] = ((desc_len >> 8) & 0xff); + buf[off++] = (desc_len & 0xff); + /* + * Size of full desctipor header minus TransportID + * containing $FABRIC_MOD specific) initiator device/port + * WWN information. + * + * See spc4r17 Section 6.13.5 Table 169 + */ + add_desc_len = (24 + desc_len); + + off += desc_len; + add_len += add_desc_len; + } + spin_unlock(&pr_tmpl->registration_lock); + /* + * Set ADDITIONAL_LENGTH + */ + buf[4] = ((add_len >> 24) & 0xff); + buf[5] = ((add_len >> 16) & 0xff); + buf[6] = ((add_len >> 8) & 0xff); + buf[7] = (add_len & 0xff); + + return 0; +} + +static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb) +{ + switch (cdb[1] & 0x1f) { + case PRI_READ_KEYS: + return core_scsi3_pri_read_keys(cmd); + case PRI_READ_RESERVATION: + return core_scsi3_pri_read_reservation(cmd); + case PRI_REPORT_CAPABILITIES: + return core_scsi3_pri_report_capabilities(cmd); + case PRI_READ_FULL_STATUS: + return core_scsi3_pri_read_full_status(cmd); + default: + printk(KERN_ERR "Unknown PERSISTENT_RESERVE_IN service" + " action: 0x%02x\n", cdb[1] & 0x1f); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + +} + +int core_scsi3_emulate_pr(struct se_cmd *cmd) +{ + unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0]; + struct se_device *dev = cmd->se_dev; + /* + * Following spc2r20 5.5.1 Reservations overview: + * + * If a logical unit has been reserved by any RESERVE command and is + * still reserved by any initiator, all PERSISTENT RESERVE IN and all + * PERSISTENT RESERVE OUT commands shall conflict regardless of + * initiator or service action and shall terminate with a RESERVATION + * CONFLICT status. + */ + if (dev->dev_flags & DF_SPC2_RESERVATIONS) { + printk(KERN_ERR "Received PERSISTENT_RESERVE CDB while legacy" + " SPC-2 reservation is held, returning" + " RESERVATION_CONFLICT\n"); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + + return (cdb[0] == PERSISTENT_RESERVE_OUT) ? + core_scsi3_emulate_pr_out(cmd, cdb) : + core_scsi3_emulate_pr_in(cmd, cdb); +} + +static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type) +{ + return 0; +} + +static int core_pt_seq_non_holder( + struct se_cmd *cmd, + unsigned char *cdb, + u32 pr_reg_type) +{ + return 0; +} + +int core_setup_reservations(struct se_device *dev, int force_pt) +{ + struct se_subsystem_dev *su_dev = dev->se_sub_dev; + struct t10_reservation_template *rest = &su_dev->t10_reservation; + /* + * If this device is from Target_Core_Mod/pSCSI, use the reservations + * of the Underlying SCSI hardware. In Linux/SCSI terms, this can + * cause a problem because libata and some SATA RAID HBAs appear + * under Linux/SCSI, but to emulate reservations themselves. + */ + if (((TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) && + !(DEV_ATTRIB(dev)->emulate_reservations)) || force_pt) { + rest->res_type = SPC_PASSTHROUGH; + rest->pr_ops.t10_reservation_check = &core_pt_reservation_check; + rest->pr_ops.t10_seq_non_holder = &core_pt_seq_non_holder; + printk(KERN_INFO "%s: Using SPC_PASSTHROUGH, no reservation" + " emulation\n", TRANSPORT(dev)->name); + return 0; + } + /* + * If SPC-3 or above is reported by real or emulated struct se_device, + * use emulated Persistent Reservations. + */ + if (TRANSPORT(dev)->get_device_rev(dev) >= SCSI_3) { + rest->res_type = SPC3_PERSISTENT_RESERVATIONS; + rest->pr_ops.t10_reservation_check = &core_scsi3_pr_reservation_check; + rest->pr_ops.t10_seq_non_holder = &core_scsi3_pr_seq_non_holder; + printk(KERN_INFO "%s: Using SPC3_PERSISTENT_RESERVATIONS" + " emulation\n", TRANSPORT(dev)->name); + } else { + rest->res_type = SPC2_RESERVATIONS; + rest->pr_ops.t10_reservation_check = &core_scsi2_reservation_check; + rest->pr_ops.t10_seq_non_holder = + &core_scsi2_reservation_seq_non_holder; + printk(KERN_INFO "%s: Using SPC2_RESERVATIONS emulation\n", + TRANSPORT(dev)->name); + } + + return 0; +} |