diff options
Diffstat (limited to 'drivers/staging/rt2860/common/cmm_info.c')
| -rw-r--r-- | drivers/staging/rt2860/common/cmm_info.c | 273 |
1 files changed, 65 insertions, 208 deletions
diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index c3e13195e12..306c3a21f90 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -63,7 +63,6 @@ INT Show_FragThreshold_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#ifdef DOT11_N_SUPPORT INT Show_HtBw_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); @@ -103,7 +102,6 @@ INT Show_HtAmsdu_Proc( INT Show_HtAutoBa_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#endif // DOT11_N_SUPPORT // INT Show_CountryRegion_Proc( IN PRTMP_ADAPTER pAd, @@ -133,11 +131,9 @@ INT Show_IEEE80211H_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#ifdef CONFIG_STA_SUPPORT INT Show_NetworkType_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#endif // CONFIG_STA_SUPPORT // INT Show_AuthMode_Proc( IN PRTMP_ADAPTER pAd, @@ -184,7 +180,6 @@ static struct { {"BGProtection", Show_BGProtection_Proc}, {"RTSThreshold", Show_RTSThreshold_Proc}, {"FragThreshold", Show_FragThreshold_Proc}, -#ifdef DOT11_N_SUPPORT {"HtBw", Show_HtBw_Proc}, {"HtMcs", Show_HtMcs_Proc}, {"HtGi", Show_HtGi_Proc}, @@ -195,7 +190,6 @@ static struct { {"HtRdg", Show_HtRdg_Proc}, {"HtAmsdu", Show_HtAmsdu_Proc}, {"HtAutoBa", Show_HtAutoBa_Proc}, -#endif // DOT11_N_SUPPORT // {"CountryRegion", Show_CountryRegion_Proc}, {"CountryRegionABand", Show_CountryRegionABand_Proc}, {"CountryCode", Show_CountryCode_Proc}, @@ -207,9 +201,7 @@ static struct { {"WmmCapable", Show_WmmCapable_Proc}, #endif {"IEEE80211H", Show_IEEE80211H_Proc}, -#ifdef CONFIG_STA_SUPPORT {"NetworkType", Show_NetworkType_Proc}, -#endif // CONFIG_STA_SUPPORT // {"AuthMode", Show_AuthMode_Proc}, {"EncrypType", Show_EncrypType_Proc}, {"DefaultKeyID", Show_DefaultKeyID_Proc}, @@ -233,11 +225,7 @@ INT Set_DriverVersion_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); -#endif // CONFIG_STA_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); return TRUE; } @@ -259,10 +247,6 @@ INT Set_CountryRegion_Proc( region = simple_strtol(arg, 0, 10); -#ifdef EXT_BUILD_CHANNEL_LIST - return -EOPNOTSUPP; -#endif // EXT_BUILD_CHANNEL_LIST // - // Country can be set only when EEPROM not programmed if (pAd->CommonCfg.CountryRegion & 0x80) { @@ -309,10 +293,6 @@ INT Set_CountryRegionABand_Proc( region = simple_strtol(arg, 0, 10); -#ifdef EXT_BUILD_CHANNEL_LIST - return -EOPNOTSUPP; -#endif // EXT_BUILD_CHANNEL_LIST // - // Country can be set only when EEPROM not programmed if (pAd->CommonCfg.CountryRegionForABand & 0x80) { @@ -355,20 +335,15 @@ INT Set_WirelessMode_Proc( WirelessMode = simple_strtol(arg, 0, 10); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { INT MaxPhyMode = PHY_11G; -#ifdef DOT11_N_SUPPORT MaxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // if (WirelessMode <= MaxPhyMode) { RTMPSetPhyMode(pAd, WirelessMode); -#ifdef DOT11_N_SUPPORT + if (WirelessMode >= PHY_11ABGN_MIXED) { pAd->CommonCfg.BACapability.field.AutoBA = TRUE; @@ -379,7 +354,7 @@ INT Set_WirelessMode_Proc( pAd->CommonCfg.BACapability.field.AutoBA = FALSE; pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE; } -#endif // DOT11_N_SUPPORT // + // Set AdhocMode rates if (pAd->StaCfg.BssType == BSS_ADHOC) { @@ -393,14 +368,11 @@ INT Set_WirelessMode_Proc( success = FALSE; } } -#endif // CONFIG_STA_SUPPORT // // it is needed to set SSID to take effect if (success == TRUE) { -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode)); } else @@ -431,14 +403,11 @@ INT Set_Channel_Proc( // check if this channel is valid if (ChannelSanity(pAd, Channel) == TRUE) { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->CommonCfg.Channel = Channel; if (MONITOR_ON(pAd)) { -#ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) @@ -450,7 +419,6 @@ INT Set_Channel_Proc( pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); } else -#endif // DOT11_N_SUPPORT // { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); @@ -458,16 +426,11 @@ INT Set_Channel_Proc( } } } -#endif // CONFIG_STA_SUPPORT // success = TRUE; } else { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - success = FALSE; -#endif // CONFIG_STA_SUPPORT // + success = FALSE; } @@ -523,14 +486,10 @@ INT Set_TxPower_Proc( TxPower = (ULONG) simple_strtol(arg, 0, 10); if (TxPower <= 100) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->CommonCfg.TxPowerDefault = TxPower; pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault; } -#endif // CONFIG_STA_SUPPORT // success = TRUE; } else @@ -595,22 +554,16 @@ INT Set_TxPreamble_Proc( { case Rt802_11PreambleShort: pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); -#endif // CONFIG_STA_SUPPORT // + + MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); break; case Rt802_11PreambleLong: -#ifdef CONFIG_STA_SUPPORT case Rt802_11PreambleAuto: // if user wants AUTO, initialize to LONG here, then change according to AP's // capability upon association. -#endif // CONFIG_STA_SUPPORT // pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); -#endif // CONFIG_STA_SUPPORT // + + MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); break; default: //Invalid argument return FALSE; @@ -639,10 +592,8 @@ INT Set_RTSThreshold_Proc( if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD)) pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh; -#ifdef CONFIG_STA_SUPPORT else if (RtsThresh == 0) pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD; -#endif // CONFIG_STA_SUPPORT // else return FALSE; //Invalid argument @@ -683,15 +634,12 @@ INT Set_FragThreshold_Proc( pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD) pAd->CommonCfg.bUseZeroToDisableFragment = TRUE; else pAd->CommonCfg.bUseZeroToDisableFragment = FALSE; } -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold)); @@ -814,6 +762,7 @@ INT Show_DescInfo_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { +#ifdef RT2860 INT i, QueIdx=0; PRT28XX_RXD_STRUC pRxD; PTXD_STRUC pTxD; @@ -844,7 +793,7 @@ INT Show_DescInfo_Proc( hex_dump("Rx Descriptor", (char *)pRxD, 16); printk("pRxD->DDONE = %x\n", pRxD->DDONE); } - +#endif /* RT2860 */ return TRUE; } @@ -912,7 +861,6 @@ BOOLEAN RTMPCheckStrPrintAble( ======================================================================== */ -#ifdef CONFIG_STA_SUPPORT VOID RTMPSetDesiredRates( IN PRTMP_ADAPTER pAdapter, IN LONG Rates) @@ -1125,10 +1073,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc( return (Status); } -#endif // CONFIG_STA_SUPPORT // - -#ifdef CONFIG_STA_SUPPORT /* ======================================================================== @@ -1178,7 +1123,6 @@ VOID RTMPWPARemoveAllKeys( } } -#endif // CONFIG_STA_SUPPORT // /* ======================================================================== @@ -1202,19 +1146,11 @@ VOID RTMPSetPhyMode( INT i; // the selected phymode must be supported by the RF IC encoded in E2PROM - // if no change, do nothing - /* bug fix - if (pAd->CommonCfg.PhyMode == phymode) - return; - */ pAd->CommonCfg.PhyMode = (UCHAR)phymode; DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel)); -#ifdef EXT_BUILD_CHANNEL_LIST - BuildChannelListEx(pAd); -#else + BuildChannelList(pAd); -#endif // EXT_BUILD_CHANNEL_LIST // // sanity check user setting for (i = 0; i < pAd->ChannelListNum; i++) @@ -1225,10 +1161,7 @@ VOID RTMPSetPhyMode( if (i == pAd->ChannelListNum) { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->CommonCfg.Channel = FirstChannel(pAd); -#endif // CONFIG_STA_SUPPORT // + pAd->CommonCfg.Channel = FirstChannel(pAd); DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel)); } @@ -1253,12 +1186,10 @@ VOID RTMPSetPhyMode( case PHY_11G: case PHY_11BG_MIXED: case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11N_2_4G: case PHY_11ABGN_MIXED: case PHY_11BGN_MIXED: case PHY_11GN_MIXED: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate @@ -1288,11 +1219,9 @@ VOID RTMPSetPhyMode( break; case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11AN_MIXED: case PHY_11AGN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate @@ -1322,8 +1251,6 @@ VOID RTMPSetPhyMode( pAd->CommonCfg.BandState = UNKNOWN_BAND; } - -#ifdef DOT11_N_SUPPORT /* ======================================================================== Routine Description: @@ -1492,6 +1419,16 @@ VOID RTMPSetHT( pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0; } +#ifndef RT30xx +#ifdef RT2870 + /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/ + if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) + { + pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0; + pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; + } +#endif // RT2870 // +#endif if(pHTPhyMode->SHORTGI == GI_400) { @@ -1539,14 +1476,7 @@ VOID RTMPSetHT( } AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - RTMPSetIndividualHT(pAd, 0); - } -#endif // CONFIG_STA_SUPPORT // - + RTMPSetIndividualHT(pAd, 0); } /* @@ -1571,16 +1501,12 @@ VOID RTMPSetIndividualHT( do { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo; DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS; //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; break; } -#endif // CONFIG_STA_SUPPORT // } while (FALSE); if (pDesired_ht_phy == NULL) @@ -1710,7 +1636,6 @@ VOID RTMPUpdateHTIE( DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n")); } -#endif // DOT11_N_SUPPORT // /* ======================================================================== @@ -1732,8 +1657,6 @@ VOID RTMPAddWcidAttributeEntry( USHORT Wcid = 0; { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (BssIdx > BSS0) { @@ -1748,39 +1671,22 @@ VOID RTMPAddWcidAttributeEntry( Wcid = pEntry->Aid; else if (pEntry && INFRA_ON(pAd)) { -#ifdef QOS_DLS_SUPPORT - if (pEntry->ValidAsDls == TRUE) - Wcid = pEntry->Aid; - else -#endif // QOS_DLS_SUPPORT // Wcid = BSSID_WCID; } else Wcid = MCAST_WCID; } -#endif // CONFIG_STA_SUPPORT // } // Update WCID attribute table offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pEntry && pEntry->ValidAsMesh) WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; -#ifdef QOS_DLS_SUPPORT - else if ((pEntry) && (pEntry->ValidAsDls) && - ((CipherAlg == CIPHER_TKIP) || - (CipherAlg == CIPHER_TKIP_NO_MIC) || - (CipherAlg == CIPHER_AES) || - (CipherAlg == CIPHER_NONE))) - WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; -#endif // QOS_DLS_SUPPORT // else WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE; } -#endif // CONFIG_STA_SUPPORT // RTMP_IO_WRITE32(pAd, offset, WCIDAttri); @@ -1801,7 +1707,12 @@ VOID RTMPAddWcidAttributeEntry( } // For key index and ext IV bit, so only need to update the position(offset+3). +#ifdef RT2860 RTMP_IO_WRITE8(pAd, offset+3, IVEIV); +#endif +#ifdef RT2870 + RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV); +#endif // RT2870 // DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg])); DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri)); @@ -1864,7 +1775,6 @@ CHAR *GetAuthMode(CHAR auth) return "UNKNOW"; } -#if 1 //#ifndef UCOS /* ========================================================================== Description: @@ -1912,11 +1822,10 @@ VOID RTMPIoctlGetSiteSurvey( "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT"); WaitCnt = 0; -#ifdef CONFIG_STA_SUPPORT pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; + while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200)) OS_WAIT(500); -#endif // CONFIG_STA_SUPPORT // for(i=0; i<pAdapter->ScanTab.BssNr ;i++) { @@ -1982,9 +1891,7 @@ VOID RTMPIoctlGetSiteSurvey( sprintf(msg+strlen(msg),"\n"); } -#ifdef CONFIG_STA_SUPPORT pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE; -#endif // CONFIG_STA_SUPPORT // wrq->u.data.length = strlen(msg); Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); @@ -2010,9 +1917,7 @@ VOID RTMPIoctlGetMacTable( COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr); MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid; MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode; -#ifdef DOT11_N_SUPPORT MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode; -#endif // DOT11_N_SUPPORT // // Fill in RSSI per entry MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0; @@ -2072,9 +1977,7 @@ VOID RTMPIoctlGetMacTable( kfree(msg); } -#endif // UCOS // -#ifdef DOT11_N_SUPPORT INT Set_BASetup_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) @@ -2089,7 +1992,6 @@ INT Set_BASetup_Proc( =>The six 2 digit hex-decimal number previous are the Mac address, =>The seventh decimal number is the tid value. */ - //printk("\n%s\n", arg); if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. return FALSE; @@ -2283,9 +2185,7 @@ INT Set_HtMcs_Proc( IN PUCHAR arg) { ULONG HtMcs, Mcs_tmp; -#ifdef CONFIG_STA_SUPPORT BOOLEAN bAutoRate = FALSE; -#endif // CONFIG_STA_SUPPORT // Mcs_tmp = simple_strtol(arg, 0, 10); @@ -2294,8 +2194,6 @@ INT Set_HtMcs_Proc( else HtMcs = MCS_AUTO; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs; pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE; @@ -2330,7 +2228,6 @@ INT Set_HtMcs_Proc( if (ADHOC_ON(pAd)) return TRUE; } -#endif // CONFIG_STA_SUPPORT // SetCommonHT(pAd); @@ -2592,13 +2489,26 @@ INT Set_HtAutoBa_Proc( Value = simple_strtol(arg, 0, 10); if (Value == 0) + { pAd->CommonCfg.BACapability.field.AutoBA = FALSE; +#ifdef RT30xx + pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE; +#endif + } else if (Value == 1) + { pAd->CommonCfg.BACapability.field.AutoBA = TRUE; +#ifdef RT30xx + pAd->CommonCfg.BACapability.field.Policy = IMMED_BA; +#endif + } else return FALSE; //Invalid argument pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA; +#ifdef RT30xx + pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy; +#endif SetCommonHT(pAd); DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA)); @@ -2762,10 +2672,7 @@ INT Set_HtMimoPs_Proc( return TRUE; } -#endif // DOT11_N_SUPPORT // - -#ifdef DOT11_N_SUPPORT INT SetCommonHT( IN PRTMP_ADAPTER pAd) { @@ -2787,7 +2694,6 @@ INT SetCommonHT( return TRUE; } -#endif // DOT11_N_SUPPORT // INT Set_FixedTxMode_Proc( IN PRTMP_ADAPTER pAd, @@ -2804,45 +2710,13 @@ INT Set_FixedTxMode_Proc( fix_tx_mode = FIXED_TXMODE_CCK; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; -#endif // CONFIG_STA_SUPPORT // + pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode)); return TRUE; } -#ifdef CONFIG_APSTA_MIXED_SUPPORT -INT Set_OpMode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) - { - DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n")); - return FALSE; - } - - if (Value == 0) - pAd->OpMode = OPMODE_STA; - else if (Value == 1) - pAd->OpMode = OPMODE_AP; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode")); - - return TRUE; -} -#endif // CONFIG_APSTA_MIXED_SUPPORT // - - ///////////////////////////////////////////////////////////////////////// PCHAR RTMPGetRalinkAuthModeStr( IN NDIS_802_11_AUTHENTICATION_MODE authMode) @@ -2851,7 +2725,9 @@ PCHAR RTMPGetRalinkAuthModeStr( { case Ndis802_11AuthModeOpen: return "OPEN"; +#if defined(RT2860) || defined(RT30xx) default: +#endif case Ndis802_11AuthModeWPAPSK: return "WPAPSK"; case Ndis802_11AuthModeShared: @@ -2866,8 +2742,14 @@ PCHAR RTMPGetRalinkAuthModeStr( return "WPAPSKWPA2PSK"; case Ndis802_11AuthModeWPA1WPA2: return "WPA1WPA2"; +#ifndef RT30xx case Ndis802_11AuthModeWPANone: return "WPANONE"; +#ifdef RT2870 + default: + return "UNKNOW"; +#endif +#endif } } @@ -2876,7 +2758,9 @@ PCHAR RTMPGetRalinkEncryModeStr( { switch(encryMode) { +#if defined(RT2860) || defined(RT30xx) default: +#endif case Ndis802_11WEPDisabled: return "NONE"; case Ndis802_11WEPEnabled: @@ -2887,6 +2771,10 @@ PCHAR RTMPGetRalinkEncryModeStr( return "AES"; case Ndis802_11Encryption4Enabled: return "TKIPAES"; +#if !defined(RT2860) && !defined(RT30xx) + default: + return "UNKNOW"; +#endif } } @@ -2911,7 +2799,7 @@ INT RTMPShowCfgValue( { sprintf(pBuf, "\n"); for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++) - sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name); + sprintf(pBuf + strlen(pBuf), "%s\n", PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name); } return Status; @@ -2921,11 +2809,7 @@ INT Show_SSID_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); -#endif // CONFIG_STA_SUPPORT // + sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); return 0; } @@ -2950,7 +2834,6 @@ INT Show_WirelessMode_Proc( case PHY_11G: sprintf(pBuf, "\t11G"); break; -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: sprintf(pBuf, "\t11A/B/G/N"); break; @@ -2972,7 +2855,6 @@ INT Show_WirelessMode_Proc( case PHY_11N_5G: sprintf(pBuf, "\t11N only with 5G"); break; -#endif // DOT11_N_SUPPORT // default: sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode); break; @@ -3066,7 +2948,6 @@ INT Show_FragThreshold_Proc( return 0; } -#ifdef DOT11_N_SUPPORT INT Show_HtBw_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) @@ -3086,11 +2967,7 @@ INT Show_HtMcs_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); -#endif // CONFIG_STA_SUPPORT // + sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); return 0; } @@ -3191,7 +3068,6 @@ INT Show_HtAutoBa_Proc( sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE"); return 0; } -#endif // DOT11_N_SUPPORT // INT Show_CountryRegion_Proc( IN PRTMP_ADAPTER pAd, @@ -3232,11 +3108,7 @@ INT Show_WmmCapable_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); -#endif // CONFIG_STA_SUPPORT // + sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); return 0; } @@ -3250,7 +3122,6 @@ INT Show_IEEE80211H_Proc( return 0; } -#ifdef CONFIG_STA_SUPPORT INT Show_NetworkType_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) @@ -3275,7 +3146,6 @@ INT Show_NetworkType_Proc( } return 0; } -#endif // CONFIG_STA_SUPPORT // INT Show_AuthMode_Proc( IN PRTMP_ADAPTER pAd, @@ -3283,10 +3153,7 @@ INT Show_AuthMode_Proc( { NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - AuthMode = pAd->StaCfg.AuthMode; -#endif // CONFIG_STA_SUPPORT // + AuthMode = pAd->StaCfg.AuthMode; if ((AuthMode >= Ndis802_11AuthModeOpen) && (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK)) @@ -3303,10 +3170,7 @@ INT Show_EncrypType_Proc( { NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - WepStatus = pAd->StaCfg.WepStatus; -#endif // CONFIG_STA_SUPPORT // + WepStatus = pAd->StaCfg.WepStatus; if ((WepStatus >= Ndis802_11WEPEnabled) && (WepStatus <= Ndis802_11Encryption4KeyAbsent)) @@ -3323,10 +3187,7 @@ INT Show_DefaultKeyID_Proc( { UCHAR DefaultKeyId = 0; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - DefaultKeyId = pAd->StaCfg.DefaultKeyId; -#endif // CONFIG_STA_SUPPORT // + DefaultKeyId = pAd->StaCfg.DefaultKeyId; sprintf(pBuf, "\t%d", DefaultKeyId); @@ -3396,11 +3257,7 @@ INT Show_WPAPSK_Proc( INT idx; UCHAR PMK[32] = {0}; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); -#endif // CONFIG_STA_SUPPORT // + NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); sprintf(pBuf, "\tPMK = "); for (idx = 0; idx < 32; idx++) |