diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/skel.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/skel.c | 90 |
1 files changed, 45 insertions, 45 deletions
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c index c7700d134cc..07f580a4820 100644 --- a/drivers/staging/comedi/drivers/skel.c +++ b/drivers/staging/comedi/drivers/skel.c @@ -97,16 +97,16 @@ struct skel_board { static const struct skel_board skel_boards[] = { { - name: "skel-100", - ai_chans:16, - ai_bits: 12, - have_dio:1, + .name = "skel-100", + .ai_chans = 16, + .ai_bits = 12, + .have_dio = 1, }, { - name: "skel-200", - ai_chans:8, - ai_bits: 16, - have_dio:0, + .name = "skel-200", + .ai_chans = 8, + .ai_bits = 16, + .have_dio = 0, }, }; @@ -154,13 +154,13 @@ struct skel_private { * the board, and also about the kernel module that contains * the device code. */ -static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it); -static int skel_detach(struct comedi_device * dev); +static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it); +static int skel_detach(struct comedi_device *dev); static struct comedi_driver driver_skel = { - driver_name:"dummy", - module:THIS_MODULE, - attach:skel_attach, - detach:skel_detach, + .driver_name = "dummy", + .module = THIS_MODULE, + .attach = skel_attach, + .detach = skel_detach, /* It is not necessary to implement the following members if you are * writing a driver for a ISA PnP or PCI card */ /* Most drivers will support multiple types of boards by @@ -179,23 +179,23 @@ static struct comedi_driver driver_skel = { * the type of board in software. ISA PnP, PCI, and PCMCIA * devices are such boards. */ - board_name:&skel_boards[0].name, - offset:sizeof(struct skel_board), - num_names:sizeof(skel_boards) / sizeof(struct skel_board), + .board_name = &skel_boards[0].name, + .offset = sizeof(struct skel_board), + .num_names = ARRAY_SIZE(skel_boards), }; -static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data); -static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data); -static int skel_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data); -static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data); -static int skel_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data); -static int skel_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_cmd * cmd); +static int skel_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data); +static int skel_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data); +static int skel_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data); +static int skel_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data); +static int skel_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data); +static int skel_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_cmd *cmd); static int skel_ns_to_timer(unsigned int *ns, int round); /* @@ -204,7 +204,7 @@ static int skel_ns_to_timer(unsigned int *ns, int round); * in the driver structure, dev->board_ptr contains that * address. */ -static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it) +static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_subdevice *s; @@ -292,7 +292,7 @@ static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it) * allocated by _attach(). dev->private and dev->subdevices are * deallocated automatically by the core. */ -static int skel_detach(struct comedi_device * dev) +static int skel_detach(struct comedi_device *dev) { printk("comedi%d: skel: remove\n", dev->minor); @@ -303,8 +303,8 @@ static int skel_detach(struct comedi_device * dev) * "instructions" read/write data in "one-shot" or "software-triggered" * mode. */ -static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +static int skel_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { int n, i; unsigned int d; @@ -331,9 +331,9 @@ static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s break; } if (i == TIMEOUT) { - /* rt_printk() should be used instead of printk() + /* printk() should be used instead of printk() * whenever the code can be called from real-time. */ - rt_printk("timeout\n"); + printk("timeout\n"); return -ETIMEDOUT; } @@ -351,8 +351,8 @@ static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s return n; } -static int skel_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_cmd * cmd) +static int skel_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_cmd *cmd) { int err = 0; int tmp; @@ -520,8 +520,8 @@ static int skel_ns_to_timer(unsigned int *ns, int round) return *ns; } -static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +static int skel_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { int i; int chan = CR_CHAN(insn->chanspec); @@ -541,8 +541,8 @@ static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s /* AO subdevices should have a read insn as well as a write insn. * Usually this means copying a value stored in devpriv. */ -static int skel_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +static int skel_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { int i; int chan = CR_CHAN(insn->chanspec); @@ -558,8 +558,8 @@ static int skel_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s * useful to applications if you implement the insn_bits interface. * This allows packed reading/writing of the DIO channels. The * comedi core can convert between insn_bits and insn_read/write */ -static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +static int skel_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { if (insn->n != 2) return -EINVAL; @@ -583,8 +583,8 @@ static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic return 2; } -static int skel_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +static int skel_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { int chan = CR_CHAN(insn->chanspec); |