diff options
Diffstat (limited to 'drivers/media/video/v4l2-common.c')
| -rw-r--r-- | drivers/media/video/v4l2-common.c | 181 |
1 files changed, 180 insertions, 1 deletions
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index f96475626da..b91d66a767d 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -802,6 +802,17 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: /* If we have a client but no subdev, then something went wrong and we must unregister the client. */ @@ -852,6 +863,17 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: /* If we have a client but no subdev, then something went wrong and we must unregister the client. */ @@ -872,6 +894,89 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev } EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr); +/* Load an i2c sub-device. */ +struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, + struct i2c_board_info *info, const unsigned short *probe_addrs) +{ + struct v4l2_subdev *sd = NULL; + struct i2c_client *client; + + BUG_ON(!v4l2_dev); + + if (module_name) + request_module(module_name); + + /* Create the i2c client */ + if (info->addr == 0 && probe_addrs) + client = i2c_new_probed_device(adapter, info, probe_addrs); + else + client = i2c_new_device(adapter, info); + + /* Note: by loading the module first we are certain that c->driver + will be set if the driver was found. If the module was not loaded + first, then the i2c core tries to delay-load the module for us, + and then c->driver is still NULL until the module is finally + loaded. This delay-load mechanism doesn't work if other drivers + want to use the i2c device, so explicitly loading the module + is the best alternative. */ + if (client == NULL || client->driver == NULL) + goto error; + + /* Lock the module so we can safely get the v4l2_subdev pointer */ + if (!try_module_get(client->driver->driver.owner)) + goto error; + sd = i2c_get_clientdata(client); + + /* Register with the v4l2_device which increases the module's + use count as well. */ + if (v4l2_device_register_subdev(v4l2_dev, sd)) + sd = NULL; + /* Decrease the module use count to match the first try_module_get. */ + module_put(client->driver->driver.owner); + + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, + info->irq, info->platform_data); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + +error: + /* If we have a client but no subdev, then something went wrong and + we must unregister the client. */ + if (client && sd == NULL) + i2c_unregister_device(client); + return sd; +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); + +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs) +{ + struct i2c_board_info info; + + /* Setup the i2c board info with the device type and + the device address. */ + memset(&info, 0, sizeof(info)); + strlcpy(info.type, client_type, sizeof(info.type)); + info.addr = addr; + info.irq = irq; + info.platform_data = platform_data; + + return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name, + &info, probe_addrs); +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); + /* Return i2c client address of v4l2_subdev. */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) { @@ -916,4 +1021,78 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type) } EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs); -#endif +#endif /* defined(CONFIG_I2C) */ + +/* Clamp x to be between min and max, aligned to a multiple of 2^align. min + * and max don't have to be aligned, but there must be at least one valid + * value. E.g., min=17,max=31,align=4 is not allowed as there are no multiples + * of 16 between 17 and 31. */ +static unsigned int clamp_align(unsigned int x, unsigned int min, + unsigned int max, unsigned int align) +{ + /* Bits that must be zero to be aligned */ + unsigned int mask = ~((1 << align) - 1); + + /* Round to nearest aligned value */ + if (align) + x = (x + (1 << (align - 1))) & mask; + + /* Clamp to aligned value of min and max */ + if (x < min) + x = (min + ~mask) & mask; + else if (x > max) + x = max & mask; + + return x; +} + +/* Bound an image to have a width between wmin and wmax, and height between + * hmin and hmax, inclusive. Additionally, the width will be a multiple of + * 2^walign, the height will be a multiple of 2^halign, and the overall size + * (width*height) will be a multiple of 2^salign. The image may be shrunk + * or enlarged to fit the alignment constraints. + * + * The width or height maximum must not be smaller than the corresponding + * minimum. The alignments must not be so high there are no possible image + * sizes within the allowed bounds. wmin and hmin must be at least 1 + * (don't use 0). If you don't care about a certain alignment, specify 0, + * as 2^0 is 1 and one byte alignment is equivalent to no alignment. If + * you only want to adjust downward, specify a maximum that's the same as + * the initial value. + */ +void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax, + unsigned int walign, + u32 *h, unsigned int hmin, unsigned int hmax, + unsigned int halign, unsigned int salign) +{ + *w = clamp_align(*w, wmin, wmax, walign); + *h = clamp_align(*h, hmin, hmax, halign); + + /* Usually we don't need to align the size and are done now. */ + if (!salign) + return; + + /* How much alignment do we have? */ + walign = __ffs(*w); + halign = __ffs(*h); + /* Enough to satisfy the image alignment? */ + if (walign + halign < salign) { + /* Max walign where there is still a valid width */ + unsigned int wmaxa = __fls(wmax ^ (wmin - 1)); + /* Max halign where there is still a valid height */ + unsigned int hmaxa = __fls(hmax ^ (hmin - 1)); + + /* up the smaller alignment until we have enough */ + do { + if (halign >= hmaxa || + (walign <= halign && walign < wmaxa)) { + *w = clamp_align(*w, wmin, wmax, walign + 1); + walign = __ffs(*w); + } else { + *h = clamp_align(*h, hmin, hmax, halign + 1); + halign = __ffs(*h); + } + } while (halign + walign < salign); + } +} +EXPORT_SYMBOL_GPL(v4l_bound_align_image); |