diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx/vulcan-setup.c')
| -rw-r--r-- | arch/arm/mach-ixp4xx/vulcan-setup.c | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c new file mode 100644 index 00000000000..4e72cfdd3c4 --- /dev/null +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -0,0 +1,244 @@ +/* + * arch/arm/mach-ixp4xx/vulcan-setup.c + * + * Arcom/Eurotech Vulcan board-setup + * + * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org> + * + * based on fsg-setup.c: + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + */ + +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/io.h> +#include <linux/w1-gpio.h> +#include <linux/mtd/plat-ram.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data vulcan_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource vulcan_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &vulcan_flash_data, + }, + .resource = &vulcan_flash_resource, + .num_resources = 1, +}; + +static struct platdata_mtd_ram vulcan_sram_data = { + .mapname = "Vulcan SRAM", + .bankwidth = 1, +}; + +static struct resource vulcan_sram_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_sram = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &vulcan_sram_data, + }, + .resource = &vulcan_sram_resource, + .num_resources = 1, +}; + +static struct resource vulcan_uart_resources[] = { + [0] = { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [2] = { + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port vulcan_uart_data[] = { + [0] = { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [1] = { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [2] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + [3] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + { } +}; + +static struct platform_device vulcan_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = vulcan_uart_data, + }, + .resource = vulcan_uart_resources, + .num_resources = ARRAY_SIZE(vulcan_uart_resources), +}; + +static struct eth_plat_info vulcan_plat_eth[] = { + [0] = { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, + [1] = { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device vulcan_eth[] = { + [0] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = &vulcan_plat_eth[0], + }, + }, + [1] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = &vulcan_plat_eth[1], + }, + }, +}; + +static struct resource vulcan_max6369_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_max6369 = { + .name = "max6369_wdt", + .id = -1, + .resource = &vulcan_max6369_resource, + .num_resources = 1, +}; + +static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { + .pin = 14, +}; + +static struct platform_device vulcan_w1_gpio = { + .name = "w1-gpio", + .id = 0, + .dev = { + .platform_data = &vulcan_w1_gpio_pdata, + }, +}; + +static struct platform_device *vulcan_devices[] __initdata = { + &vulcan_uart, + &vulcan_flash, + &vulcan_sram, + &vulcan_max6369, + &vulcan_eth[0], + &vulcan_eth[1], + &vulcan_w1_gpio, +}; + +static void __init vulcan_init(void) +{ + ixp4xx_sys_init(); + + /* Flash is spread over both CS0 and CS1 */ + vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + *IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_SIZE(0xF) | + IXP4XX_EXP_BUS_BYTE_RD16 | + IXP4XX_EXP_BUS_WR_EN; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* SRAM on CS2, (256kB, 8bit, writable) */ + vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2); + vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1; + *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(1) | + IXP4XX_EXP_BUS_HOLD_T(2) | + IXP4XX_EXP_BUS_SIZE(9) | + IXP4XX_EXP_BUS_SPLT_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */ + vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3); + vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1; + vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start; + vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8; + *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)| + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* GPIOS on CS4 (512 bytes, 8bits, writable) */ + *IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* max6369 on CS5 (512 bytes, 8bits, writable) */ + vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5); + vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5); + *IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); +} + +MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") + /* Maintainer: Marc Zyngier <maz@misterjones.org> */ + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = vulcan_init, +MACHINE_END |