diff options
Diffstat (limited to 'arch/arm/mach-davinci')
45 files changed, 3249 insertions, 335 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 0316e201ada..b77b860b36d 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -20,23 +20,23 @@ config ARCH_DAVINCI_DM644x select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM355 - bool "DaVinci 355 based system" + bool "DaVinci 355 based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM646x - bool "DaVinci 646x based system" + bool "DaVinci 646x based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DA830 - bool "DA830/OMAP-L137 based system" + bool "DA830/OMAP-L137/AM17x based system" select CP_INTC select ARCH_DAVINCI_DA8XX select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 config ARCH_DAVINCI_DA850 - bool "DA850/OMAP-L138 based system" + bool "DA850/OMAP-L138/AM18x based system" select CP_INTC select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ @@ -50,6 +50,11 @@ config ARCH_DAVINCI_DM365 select AINTC select ARCH_DAVINCI_DMx +config ARCH_DAVINCI_TNETV107X + select CPU_V6 + select CP_INTC + bool "TNETV107X based system" + comment "DaVinci Board Type" config MACH_DAVINCI_EVM @@ -110,21 +115,21 @@ config MACH_DAVINCI_DM365_EVM for development is a DM365 EVM config MACH_DAVINCI_DA830_EVM - bool "TI DA830/OMAP-L137 Reference Platform" + bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X help - Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. + Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. choice - prompt "Select DA830/OMAP-L137 UI board peripheral" + prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" depends on MACH_DAVINCI_DA830_EVM help - The presence of UI card on the DA830/OMAP-L137 EVM is detected - automatically based on successful probe of the I2C based GPIO - expander on that board. This option selected in this menu has - an effect only in case of a successful UI card detection. + The presence of UI card on the DA830/OMAP-L137/AM17x EVM is + detected automatically based on successful probe of the I2C + based GPIO expander on that board. This option selected in this + menu has an effect only in case of a successful UI card detection. config DA830_UI_LCD bool "LCD" @@ -135,23 +140,23 @@ config DA830_UI_LCD config DA830_UI_NAND bool "NAND flash" help - Say Y here to use the NAND flash. Do not forget to setup + Say Y here to use the NAND flash. Do not forget to setup the switch correctly. endchoice config MACH_DAVINCI_DA850_EVM - bool "TI DA850/OMAP-L138 Reference Platform" + bool "TI DA850/OMAP-L138/AM18x Reference Platform" default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 select GPIO_PCA953X help - Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. + Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. choice prompt "Select peripherals connected to expander on UI board" depends on MACH_DAVINCI_DA850_EVM help - The presence of User Interface (UI) card on the DA850/OMAP-L138 + The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x EVM is detected automatically based on successful probe of the I2C based GPIO expander on that card. This option selected in this menu has an effect only in case of a successful UI card detection. @@ -160,19 +165,42 @@ config DA850_UI_NONE bool "No peripheral is enabled" help Say Y if you do not want to enable any of the peripherals connected - to TCA6416 expander on DA850/OMAP-L138 EVM UI card + to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card config DA850_UI_RMII bool "RMII Ethernet PHY" help - Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. - This PHY is found on the UI daughter card that is supplied with + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x + EVM. This PHY is found on the UI daughter card that is supplied with the EVM. NOTE: Please take care while choosing this option, MII PHY will not be functional if RMII mode is selected. endchoice +config MACH_TNETV107X + bool "TI TNETV107X Reference Platform" + default ARCH_DAVINCI_TNETV107X + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here to select the TI TNETV107X Evaluation Module. + +config MACH_MITYOMAPL138 + bool "Critical Link MityDSP-L138/MityARM-1808 SoM" + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 + System on Module. Information on this SoM may be found at + http://www.mitydsp.com + +config MACH_OMAPL138_HAWKBOARD + bool "TI AM1808 / OMAPL-138 Hawkboard platform" + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . + Information of this board may be found at + http://www.hawkboard.org/ + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI @@ -183,20 +211,20 @@ config DAVINCI_MUX say Y. config DAVINCI_MUX_DEBUG - bool "Multiplexing debug output" - depends on DAVINCI_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. config DAVINCI_MUX_WARNINGS - bool "Warn about pins the bootloader didn't set up" - depends on DAVINCI_MUX - help - Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings - printed, it's safe to deselect DAVINCI_MUX for your product. + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. config DAVINCI_RESET_CLOCKS bool "Reset unused clocks during boot" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 6aac880eb79..0b87a1ca2bb 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o dma.o usb.o common.o sram.o + gpio.o dma.o usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o @@ -16,6 +16,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o +obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o +obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o @@ -30,6 +32,9 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o +obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o +obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o +obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c new file mode 100644 index 00000000000..9c3f500fc12 --- /dev/null +++ b/arch/arm/mach-davinci/aemif.c @@ -0,0 +1,133 @@ +/* + * AEMIF support for DaVinci SoCs + * + * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/time.h> + +#include <mach/aemif.h> + +/* Timing value configuration */ + +#define TA(x) ((x) << 2) +#define RHOLD(x) ((x) << 4) +#define RSTROBE(x) ((x) << 7) +#define RSETUP(x) ((x) << 13) +#define WHOLD(x) ((x) << 17) +#define WSTROBE(x) ((x) << 20) +#define WSETUP(x) ((x) << 26) + +#define TA_MAX 0x3 +#define RHOLD_MAX 0x7 +#define RSTROBE_MAX 0x3f +#define RSETUP_MAX 0xf +#define WHOLD_MAX 0x7 +#define WSTROBE_MAX 0x3f +#define WSETUP_MAX 0xf + +#define TIMING_MASK (TA(TA_MAX) | \ + RHOLD(RHOLD_MAX) | \ + RSTROBE(RSTROBE_MAX) | \ + RSETUP(RSETUP_MAX) | \ + WHOLD(WHOLD_MAX) | \ + WSTROBE(WSTROBE_MAX) | \ + WSETUP(WSETUP_MAX)) + +/* + * aemif_calc_rate - calculate timing data. + * @wanted: The cycle time needed in nanoseconds. + * @clk: The input clock rate in kHz. + * @max: The maximum divider value that can be programmed. + * + * On success, returns the calculated timing value minus 1 for easy + * programming into AEMIF timing registers, else negative errno. + */ +static int aemif_calc_rate(int wanted, unsigned long clk, int max) +{ + int result; + + result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1; + + pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted); + + /* It is generally OK to have a more relaxed timing than requested... */ + if (result < 0) + result = 0; + + /* ... But configuring tighter timings is not an option. */ + else if (result > max) + result = -EINVAL; + + return result; +} + +/** + * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface + * @t: timing values to be progammed + * @base: The virtual base address of the AEMIF interface + * @cs: chip-select to program the timing values for + * + * This function programs the given timing values (in real clock) into the + * AEMIF registers taking the AEMIF clock into account. + * + * This function does not use any locking while programming the AEMIF + * because it is expected that there is only one user of a given + * chip-select. + * + * Returns 0 on success, else negative errno. + */ +int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs) +{ + unsigned set, val; + unsigned ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup; + unsigned offset = A1CR_OFFSET + cs * 4; + struct clk *aemif_clk; + unsigned long clkrate; + + if (!t) + return 0; /* Nothing to do */ + + aemif_clk = clk_get(NULL, "aemif"); + if (IS_ERR(aemif_clk)) + return PTR_ERR(aemif_clk); + + clkrate = clk_get_rate(aemif_clk); + + clkrate /= 1000; /* turn clock into kHz for ease of use */ + + ta = aemif_calc_rate(t->ta, clkrate, TA_MAX); + rhold = aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX); + rstrobe = aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX); + rsetup = aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX); + whold = aemif_calc_rate(t->whold, clkrate, WHOLD_MAX); + wstrobe = aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX); + wsetup = aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX); + + if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 || + whold < 0 || wstrobe < 0 || wsetup < 0) { + pr_err("%s: cannot get suitable timings\n", __func__); + return -EINVAL; + } + + set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) | + WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup); + + val = __raw_readl(base + offset); + val &= ~TIMING_MASK; + val |= set; + __raw_writel(val, base + offset); + + return 0; +} +EXPORT_SYMBOL(davinci_aemif_setup_timing); diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 212d97084bd..b52a3a1abd9 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -29,10 +29,9 @@ #include <mach/nand.h> #include <mach/da8xx.h> #include <mach/usb.h> +#include <mach/aemif.h> -#define DA830_EVM_PHY_MASK 0x0 -#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define DA830_EVM_PHY_ID "" /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. */ @@ -208,7 +207,7 @@ static struct snd_platform_data da830_evm_snd_data = { .num_serializer = ARRAY_SIZE(da830_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da830_iis_serializer_direction, - .eventq_no = EVENTQ_0, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, @@ -360,6 +359,16 @@ static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { .pattern = da830_evm_nand_mirror_pattern }; +static struct davinci_aemif_timing da830_evm_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + static struct davinci_nand_pdata da830_evm_nand_pdata = { .parts = da830_evm_nand_partitions, .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), @@ -368,6 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { .options = NAND_USE_FLASH_BBT, .bbt_td = &da830_evm_nand_bbt_main_descr, .bbt_md = &da830_evm_nand_bbt_mirror_descr, + .timing = &da830_evm_nandflash_timing, }; static struct resource da830_evm_nand_resources[] = { @@ -494,12 +504,42 @@ static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { .bus_delay = 0, /* usec */ }; +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence + * they are being reserved for codecs on the DSP side. + */ +static const s16 da830_dma_rsv_chans[][2] = { + /* (offset, number) */ + { 8, 2}, + {12, 2}, + {24, 4}, + {30, 2}, + {-1, -1} +}; + +static const s16 da830_dma_rsv_slots[][2] = { + /* (offset, number) */ + { 8, 2}, + {12, 2}, + {24, 4}, + {30, 26}, + {-1, -1} +}; + +static struct edma_rsv_info da830_edma_rsv[] = { + { + .rsv_chans = da830_dma_rsv_chans, + .rsv_slots = da830_dma_rsv_slots, + }, +}; + static __init void da830_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; - ret = da8xx_register_edma(); + ret = da830_register_edma(da830_edma_rsv); if (ret) pr_warning("da830_evm_init: edma registration failed: %d\n", ret); @@ -516,9 +556,8 @@ static __init void da830_evm_init(void) da830_evm_usb_init(); - soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; + soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID; ret = davinci_cfg_reg_list(da830_cpgmac_pins); if (ret) @@ -556,6 +595,9 @@ static __init void da830_evm_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE static int __init da830_evm_console_init(void) { + if (!machine_is_davinci_da830_evm()) + return 0; + return add_preferred_console("ttyS", 2, "115200"); } console_initcall(da830_evm_console_init); @@ -566,9 +608,7 @@ static void __init da830_evm_map_io(void) da830_init(); } -MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, +MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da830_evm_map_io, .init_irq = cp_intc_init, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b280efb1fa1..c6e11c682e4 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -26,7 +26,6 @@ #include <linux/mtd/physmap.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> -#include <linux/mfd/tps6507x.h> #include <linux/input/tps6507x-ts.h> #include <asm/mach-types.h> @@ -36,10 +35,9 @@ #include <mach/da8xx.h> #include <mach/nand.h> #include <mach/mux.h> +#include <mach/aemif.h> -#define DA850_EVM_PHY_MASK 0x1 -#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define DA850_EVM_PHY_ID "0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) @@ -110,7 +108,7 @@ static struct platform_device da850_pm_device = { * to boot, using TI's tools to install the secondary boot loader * (UBL) and U-Boot. */ -struct mtd_partition da850_evm_nandflash_partition[] = { +static struct mtd_partition da850_evm_nandflash_partition[] = { { .name = "u-boot env", .offset = 0, @@ -143,12 +141,23 @@ struct mtd_partition da850_evm_nandflash_partition[] = { }, }; +static struct davinci_aemif_timing da850_evm_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + static struct davinci_nand_pdata da850_evm_nandflash_data = { .parts = da850_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, .options = NAND_USE_FLASH_BBT, + .timing = &da850_evm_nandflash_timing, }; static struct resource da850_evm_nandflash_resource[] = { @@ -196,6 +205,30 @@ static void __init da850_evm_init_nor(void) iounmap(aemif_addr); } +static const short da850_evm_nand_pins[] = { + DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, + DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, + DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4, + DA850_NEMA_WE, DA850_NEMA_OE, + -1 +}; + +static const short da850_evm_nor_pins[] = { + DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, + DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1, + DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5, + DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9, + DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13, + DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1, + DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5, + DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9, + DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13, + DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17, + DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21, + DA850_EMA_A_22, DA850_EMA_A_23, + -1 +}; + static u32 ui_card_detected; #if defined(CONFIG_MMC_DAVINCI) || \ @@ -205,17 +238,17 @@ static u32 ui_card_detected; #define HAS_MMC 0 #endif -static __init void da850_evm_setup_nor_nand(void) +static inline void da850_evm_setup_nor_nand(void) { int ret = 0; if (ui_card_detected & !HAS_MMC) { - ret = davinci_cfg_reg_list(da850_nand_pins); + ret = davinci_cfg_reg_list(da850_evm_nand_pins); if (ret) pr_warning("da850_evm_init: nand mux setup failed: " "%d\n", ret); - ret = davinci_cfg_reg_list(da850_nor_pins); + ret = davinci_cfg_reg_list(da850_evm_nor_pins); if (ret) pr_warning("da850_evm_init: nor mux setup failed: %d\n", ret); @@ -343,7 +376,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .eventq_no = EVENTQ_1, + .asp_chan_q = EVENTQ_1, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, @@ -406,7 +439,7 @@ static int da850_lcd_hw_init(void) /* TPS65070 voltage regulator support */ /* 3.3V */ -struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { +static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { { .supply = "usb0_vdda33", }, @@ -416,7 +449,7 @@ struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { }; /* 3.3V or 1.8V */ -struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { +static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { { .supply = "dvdd3318_a", }, @@ -429,14 +462,14 @@ struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { }; /* 1.2V */ -struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { +static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { { .supply = "cvdd", }, }; /* 1.8V LDO */ -struct regulator_consumer_supply tps65070_ldo1_consumers[] = { +static struct regulator_consumer_supply tps65070_ldo1_consumers[] = { { .supply = "sata_vddr", }, @@ -452,7 +485,7 @@ struct regulator_consumer_supply tps65070_ldo1_consumers[] = { }; /* 1.2V LDO */ -struct regulator_consumer_supply tps65070_ldo2_consumers[] = { +static struct regulator_consumer_supply tps65070_ldo2_consumers[] = { { .supply = "sata_vdd", }, @@ -475,7 +508,7 @@ static struct tps6507x_reg_platform_data tps6507x_platform_data = { .defdcdc_default = true, }; -struct regulator_init_data tps65070_regulator_data[] = { +static struct regulator_init_data tps65070_regulator_data[] = { /* dcdc1 */ { .constraints = { @@ -576,6 +609,23 @@ static const short da850_evm_lcdc_pins[] = { -1 }; +static const short da850_evm_mii_pins[] = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static const short da850_evm_rmii_pins[] = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + static int __init da850_evm_config_emac(void) { void __iomem *cfg_chip3_base; @@ -593,12 +643,12 @@ static int __init da850_evm_config_emac(void) if (rmii_en) { val |= BIT(8); - ret = davinci_cfg_reg_list(da850_rmii_pins); + ret = davinci_cfg_reg_list(da850_evm_rmii_pins); pr_info("EMAC: RMII PHY configured, MII PHY will not be" " functional\n"); } else { val &= ~BIT(8); - ret = davinci_cfg_reg_list(da850_cpgmac_pins); + ret = davinci_cfg_reg_list(da850_evm_mii_pins); pr_info("EMAC: MII PHY configured, RMII PHY will not be" " functional\n"); } @@ -625,8 +675,7 @@ static int __init da850_evm_config_emac(void) /* Enable/Disable MII MDIO clock */ gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); - soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; ret = da8xx_register_emac(); if (ret) @@ -637,6 +686,56 @@ static int __init da850_evm_config_emac(void) } device_initcall(da850_evm_config_emac); +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence + * they are being reserved for codecs on the DSP side. + */ +static const s16 da850_dma0_rsv_chans[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma0_rsv_slots[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 50}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_chans[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_slots[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 90}, + {-1, -1} +}; + +static struct edma_rsv_info da850_edma_cc0_rsv = { + .rsv_chans = da850_dma0_rsv_chans, + .rsv_slots = da850_dma0_rsv_slots, +}; + +static struct edma_rsv_info da850_edma_cc1_rsv = { + .rsv_chans = da850_dma1_rsv_chans, + .rsv_slots = da850_dma1_rsv_slots, +}; + +static struct edma_rsv_info *da850_edma_rsv[2] = { + &da850_edma_cc0_rsv, + &da850_edma_cc1_rsv, +}; + static __init void da850_evm_init(void) { int ret; @@ -646,7 +745,7 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", ret); - ret = da8xx_register_edma(); + ret = da850_register_edma(da850_edma_rsv); if (ret) pr_warning("da850_evm_init: edma registration failed: %d\n", ret); @@ -737,7 +836,7 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); - ret = da850_register_cpufreq(); + ret = da850_register_cpufreq("pll0_sysclk3"); if (ret) pr_warning("da850_evm_init: cpufreq registration failed: %d\n", ret); @@ -756,6 +855,9 @@ static __init void da850_evm_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE static int __init da850_evm_console_init(void) { + if (!machine_is_davinci_da850_evm()) + return 0; + return add_preferred_console("ttyS", 2, "115200"); } console_initcall(da850_evm_console_init); @@ -766,9 +868,7 @@ static void __init da850_evm_map_io(void) da850_init(); } -MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, +MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da850_evm_map_io, .init_irq = cp_intc_init, diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a3191015efe..6e7cad13352 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -351,8 +351,6 @@ static __init void dm355_evm_init(void) } MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm355_evm_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index f1d8132cf0c..543f9911b28 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -270,8 +270,6 @@ static __init void dm355_leopard_init(void) } MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm355_leopard_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 84acef1d0b3..c67f684ee3e 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,9 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_MASK (0x2) -#define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM365_EVM_PHY_ID "0:01" /* * A MAX-II CPLD is used for various board control functions. */ @@ -175,7 +173,9 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data; +static struct snd_platform_data dm365_evm_snd_data = { + .asp_chan_q = EVENTQ_3, +}; static struct i2c_board_info i2c_info[] = { { @@ -533,8 +533,7 @@ fail: /* ... and ENET ... */ dm365evm_emac_configure(); - soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID; resets &= ~BIT(3); /* ... and AIC33 */ @@ -613,8 +612,6 @@ static __init void dm365_evm_init(void) } MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm365_evm_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 34c8b418cd7..0ca90b83458 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -37,10 +37,9 @@ #include <mach/nand.h> #include <mach/mmc.h> #include <mach/usb.h> +#include <mach/aemif.h> -#define DM644X_EVM_PHY_MASK (0x2) -#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM644X_EVM_PHY_ID "0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) @@ -137,11 +136,22 @@ static struct mtd_partition davinci_evm_nandflash_partition[] = { */ }; +static struct davinci_aemif_timing davinci_evm_nandflash_timing = { + .wsetup = 20, + .wstrobe = 40, + .whold = 20, + .rsetup = 10, + .rstrobe = 40, + .rhold = 10, + .ta = 40, +}; + static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .options = NAND_USE_FLASH_BBT, + .timing = &davinci_evm_nandflash_timing, }; static struct resource davinci_evm_nandflash_resource[] = { @@ -695,9 +705,7 @@ static __init void davinci_evm_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); - soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; - + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, davinci_phy_fixup); @@ -706,8 +714,6 @@ static __init void davinci_evm_init(void) MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_evm_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 6d8889342c9..f6ac9ba7487 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -42,6 +42,7 @@ #include <mach/nand.h> #include <mach/clock.h> #include <mach/cdce949.h> +#include <mach/aemif.h> #include "clock.h" @@ -71,6 +72,16 @@ static struct mtd_partition davinci_nand_partitions[] = { } }; +static struct davinci_aemif_timing dm6467tevm_nandflash_timing = { + .wsetup = 29, + .wstrobe = 24, + .whold = 14, + .rsetup = 19, + .rstrobe = 33, + .rhold = 0, + .ta = 29, +}; + static struct davinci_nand_pdata davinci_nand_data = { .mask_cle = 0x80000, .mask_ale = 0x40000, @@ -323,7 +334,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction), .tdm_slots = 2, .serial_dir = dm646x_iis_serializer_direction, - .eventq_no = EVENTQ_0, + .asp_chan_q = EVENTQ_0, }, { .tx_dma_offset = 0x400, @@ -332,7 +343,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction), .tdm_slots = 32, .serial_dir = dm646x_dit_serializer_direction, - .eventq_no = EVENTQ_0, + .asp_chan_q = EVENTQ_0, }, }; @@ -718,8 +729,39 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_MASK (0x2) -#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ +#define DM646X_EVM_PHY_ID "0:01" +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on dm646x, hence they are being + * reserved for codecs on the DSP side. + */ +static const s16 dm646x_dma_rsv_chans[][2] = { + /* (offset, number) */ + { 0, 4}, + {13, 3}, + {24, 4}, + {30, 2}, + {54, 3}, + {-1, -1} +}; + +static const s16 dm646x_dma_rsv_slots[][2] = { + /* (offset, number) */ + { 0, 4}, + {13, 3}, + {24, 4}, + {30, 2}, + {54, 3}, + {128, 384}, + {-1, -1} +}; + +static struct edma_rsv_info dm646x_edma_rsv[] = { + { + .rsv_chans = dm646x_dma_rsv_chans, + .rsv_slots = dm646x_dma_rsv_slots, + }, +}; static __init void evm_init(void) { @@ -730,13 +772,17 @@ static __init void evm_init(void) dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); + if (machine_is_davinci_dm6467tevm()) + davinci_nand_data.timing = &dm6467tevm_nandflash_timing; + platform_device_register(&davinci_nand_device); + dm646x_init_edma(dm646x_edma_rsv); + if (HAS_ATA) davinci_init_ide(); - soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID; } #define DM646X_EVM_REF_FREQ 27000000 @@ -751,8 +797,6 @@ void __init dm646x_board_setup_refclk(struct clk *clk) } MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = davinci_map_io, .init_irq = davinci_irq_init, @@ -761,8 +805,6 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = davinci_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c new file mode 100644 index 00000000000..0bb5f0ce4fd --- /dev/null +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -0,0 +1,422 @@ +/* + * Critical Link MityOMAP-L138 SoM + * + * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/regulator/machine.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/etherdevice.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> +#include <mach/nand.h> +#include <mach/mux.h> + +#define MITYOMAPL138_PHY_ID "0:03" + +#define FACTORY_CONFIG_MAGIC 0x012C0138 +#define FACTORY_CONFIG_VERSION 0x00010001 + +/* Data Held in On-Board I2C device */ +struct factory_config { + u32 magic; + u32 version; + u8 mac[6]; + u32 fpga_type; + u32 spare; + u32 serialnumber; + char partnum[32]; +}; + +static struct factory_config factory_config; + +static void read_factory_config(struct memory_accessor *a, void *context) +{ + int ret; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + if (ret != sizeof(struct factory_config)) { + pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n", + ret); + return; + } + + if (factory_config.magic != FACTORY_CONFIG_MAGIC) { + pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n", + factory_config.magic); + return; + } + + if (factory_config.version != FACTORY_CONFIG_VERSION) { + pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n", + factory_config.version); + return; + } + + pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac); + pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum); + if (is_valid_ether_addr(factory_config.mac)) + memcpy(soc_info->emac_pdata->mac_addr, + factory_config.mac, ETH_ALEN); + else + pr_warning("MityOMAPL138: Invalid MAC found " + "in factory config block\n"); +} + +static struct at24_platform_data mityomapl138_fd_chip = { + .byte_len = 256, + .page_size = 8, + .flags = AT24_FLAG_READONLY | AT24_FLAG_IRUGO, + .setup = read_factory_config, + .context = NULL, +}; + +static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { + .bus_freq = 100, /* kHz */ + .bus_delay = 0, /* usec */ +}; + +/* TPS65023 voltage regulator support */ +/* 1.2V Core */ +static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = { + { + .supply = "cvdd", + }, +}; + +/* 1.8V */ +static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = { + { + .supply = "usb0_vdda18", + }, + { + .supply = "usb1_vdda18", + }, + { + .supply = "ddr_dvdd18", + }, + { + .supply = "sata_vddr", + }, +}; + +/* 1.2V */ +static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = { + { + .supply = "sata_vdd", + }, + { + .supply = "usb_cvdd", + }, + { + .supply = "pll0_vdda", + }, + { + .supply = "pll1_vdda", + }, +}; + +/* 1.8V Aux LDO, not used */ +static struct regulator_consumer_supply tps65023_ldo1_consumers[] = { + { + .supply = "1.8v_aux", + }, +}; + +/* FPGA VCC Aux (2.5 or 3.3) LDO */ +static struct regulator_consumer_supply tps65023_ldo2_consumers[] = { + { + .supply = "vccaux", + }, +}; + +static struct regulator_init_data tps65023_regulator_data[] = { + /* dcdc1 */ + { + .constraints = { + .min_uV = 1150000, + .max_uV = 1350000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers), + .consumer_supplies = tps65023_dcdc1_consumers, + }, + /* dcdc2 */ + { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers), + .consumer_supplies = tps65023_dcdc2_consumers, + }, + /* dcdc3 */ + { + .constraints = { + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers), + .consumer_supplies = tps65023_dcdc3_consumers, + }, + /* ldo1 */ + { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers), + .consumer_supplies = tps65023_ldo1_consumers, + }, + /* ldo2 */ + { + .constraints = { + .min_uV = 2500000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers), + .consumer_supplies = tps65023_ldo2_consumers, + }, +}; + +static struct i2c_board_info __initdata mityomap_tps65023_info[] = { + { + I2C_BOARD_INFO("tps65023", 0x48), + .platform_data = &tps65023_regulator_data[0], + }, + { + I2C_BOARD_INFO("24c02", 0x50), + .platform_data = &mityomapl138_fd_chip, + }, +}; + +static int __init pmic_tps65023_init(void) +{ + return i2c_register_board_info(1, mityomap_tps65023_info, + ARRAY_SIZE(mityomap_tps65023_info)); +} + +/* + * MityDSP-L138 includes a 256 MByte large-page NAND flash + * (128K blocks). + */ +static struct mtd_partition mityomapl138_nandflash_partition[] = { + { + .name = "rootfs", + .offset = 0, + .size = SZ_128M, + .mask_flags = 0, /* MTD_WRITEABLE, */ + }, + { + .name = "homefs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct davinci_nand_pdata mityomapl138_nandflash_data = { + .parts = mityomapl138_nandflash_partition, + .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16, + .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */ +}; + +static struct resource mityomapl138_nandflash_resource[] = { + { + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mityomapl138_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &mityomapl138_nandflash_data, + }, + .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), + .resource = mityomapl138_nandflash_resource, +}; + +static struct platform_device *mityomapl138_devices[] __initdata = { + &mityomapl138_nandflash_device, +}; + +static void __init mityomapl138_setup_nand(void) +{ + platform_add_devices(mityomapl138_devices, + ARRAY_SIZE(mityomapl138_devices)); +} + +static struct davinci_uart_config mityomapl138_uart_config __initdata = { + .enabled_uarts = 0x7, +}; + +static const short mityomap_mii_pins[] = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static const short mityomap_rmii_pins[] = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static void __init mityomapl138_config_emac(void) +{ + void __iomem *cfg_chip3_base; + int ret; + u32 val; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */ + + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); + val = __raw_readl(cfg_chip3_base); + + if (soc_info->emac_pdata->rmii_en) { + val |= BIT(8); + ret = davinci_cfg_reg_list(mityomap_rmii_pins); + pr_info("RMII PHY configured\n"); + } else { + val &= ~BIT(8); + ret = davinci_cfg_reg_list(mityomap_mii_pins); + pr_info("MII PHY configured\n"); + } + + if (ret) { + pr_warning("mii/rmii mux setup failed: %d\n", ret); + return; + } + + /* configure the CFGCHIP3 register for RMII or MII */ + __raw_writel(val, cfg_chip3_base); + + soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID; + + ret = da8xx_register_emac(); + if (ret) + pr_warning("emac registration failed: %d\n", ret); +} + +static struct davinci_pm_config da850_pm_pdata = { + .sleepcount = 128, +}; + +static struct platform_device da850_pm_device = { + .name = "pm-davinci", + .dev = { + .platform_data = &da850_pm_pdata, + }, + .id = -1, +}; + +static void __init mityomapl138_init(void) +{ + int ret; + + /* for now, no special EDMA channels are reserved */ + ret = da850_register_edma(NULL); + if (ret) + pr_warning("edma registration failed: %d\n", ret); + + ret = da8xx_register_watchdog(); + if (ret) + pr_warning("watchdog registration failed: %d\n", ret); + + davinci_serial_init(&mityomapl138_uart_config); + + ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata); + if (ret) + pr_warning("i2c0 registration failed: %d\n", ret); + + ret = pmic_tps65023_init(); + if (ret) + pr_warning("TPS65023 PMIC init failed: %d\n", ret); + + mityomapl138_setup_nand(); + + mityomapl138_config_emac(); + + ret = da8xx_register_rtc(); + if (ret) + pr_warning("rtc setup failed: %d\n", ret); + + ret = da850_register_cpufreq("pll0_sysclk3"); + if (ret) + pr_warning("cpufreq registration failed: %d\n", ret); + + ret = da8xx_register_cpuidle(); + if (ret) + pr_warning("cpuidle registration failed: %d\n", ret); + + ret = da850_register_pm(&da850_pm_device); + if (ret) + pr_warning("da850_evm_init: suspend registration failed: %d\n", + ret); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init mityomapl138_console_init(void) +{ + if (!machine_is_mityomapl138()) + return 0; + + return add_preferred_console("ttyS", 1, "115200"); +} +console_initcall(mityomapl138_console_init); +#endif + +static void __init mityomapl138_map_io(void) +{ + da850_init(); +} + +MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") + .boot_params = (DA8XX_DDR_BASE + 0x100), + .map_io = mityomapl138_map_io, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = mityomapl138_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 4c30e929bbf..6c389ff1020 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,9 +39,7 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define NEUROS_OSD2_PHY_MASK 0x2 -#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define NEUROS_OSD2_PHY_ID "0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 @@ -252,8 +250,7 @@ static __init void davinci_ntosd2_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); - soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; davinci_setup_usb(1000, 8); /* @@ -275,8 +272,6 @@ static __init void davinci_ntosd2_init(void) MACHINE_START(NEUROS_OSD2, "Neuros OSD2") /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_ntosd2_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c new file mode 100644 index 00000000000..0b8dbdb79fe --- /dev/null +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -0,0 +1,62 @@ +/* + * Hawkboard.org based on TI's OMAP-L138 Platform + * + * Initial code: Syed Mohammed Khasim + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/cp_intc.h> +#include <mach/da8xx.h> + +static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { + .enabled_uarts = 0x7, +}; + +static __init void omapl138_hawk_init(void) +{ + int ret; + + davinci_serial_init(&omapl138_hawk_uart_config); + + ret = da8xx_register_watchdog(); + if (ret) + pr_warning("omapl138_hawk_init: " + "watchdog registration failed: %d\n", + ret); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init omapl138_hawk_console_init(void) +{ + if (!machine_is_omapl138_hawkboard()) + return 0; + + return add_preferred_console("ttyS", 2, "115200"); +} +console_initcall(omapl138_hawk_console_init); +#endif + +static void __init omapl138_hawk_map_io(void) +{ + da850_init(); +} + +MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") + .boot_params = (DA8XX_DDR_BASE + 0x100), + .map_io = omapl138_hawk_map_io, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = omapl138_hawk_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 23e664a1a80..61ac96d8f00 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -42,9 +42,7 @@ #include <mach/mux.h> #include <mach/usb.h> -#define SFFSDR_PHY_MASK (0x2) -#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define SFFSDR_PHY_ID "0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 @@ -143,8 +141,7 @@ static __init void davinci_sffsdr_init(void) ARRAY_SIZE(davinci_sffsdr_devices)); sffsdr_init_i2c(); davinci_serial_init(&uart_config); - soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID; davinci_setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ @@ -154,8 +151,6 @@ static __init void davinci_sffsdr_init(void) MACHINE_START(SFFSDR, "Lyrtech SFFSDR") /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c new file mode 100644 index 00000000000..a6db8546022 --- /dev/null +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -0,0 +1,228 @@ +/* + * Texas Instruments TNETV107X EVM Board Support + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/ratelimit.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/mux.h> +#include <mach/cp_intc.h> +#include <mach/tnetv107x.h> + +#define EVM_MMC_WP_GPIO 21 +#define EVM_MMC_CD_GPIO 24 + +static int initialize_gpio(int gpio, char *desc) +{ + int ret; + + ret = gpio_request(gpio, desc); + if (ret < 0) { + pr_err_ratelimited("cannot open %s gpio\n", desc); + return -ENOSYS; + } + gpio_direction_input(gpio); + return gpio; +} + +static int mmc_get_cd(int index) +{ + static int gpio; + + if (!gpio) + gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect"); + + if (gpio < 0) + return gpio; + + return gpio_get_value(gpio) ? 0 : 1; +} + +static int mmc_get_ro(int index) +{ + static int gpio; + + if (!gpio) + gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect"); + + if (gpio < 0) + return gpio; + + return gpio_get_value(gpio) ? 1 : 0; +} + +static struct davinci_mmc_config mmc_config = { + .get_cd = mmc_get_cd, + .get_ro = mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + +static const short sdio1_pins[] __initdata = { + TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, + TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, + TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, + TNETV107X_GPIO21, TNETV107X_GPIO24, + -1 +}; + +static const short uart1_pins[] __initdata = { + TNETV107X_UART1_RD, TNETV107X_UART1_TD, + -1 +}; + +static struct mtd_partition nand_partitions[] = { + /* bootloader (U-Boot, etc) in first 12 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = (12*SZ_128K), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M, + .mask_flags = 0, + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +static struct davinci_nand_pdata nand_config = { + .mask_cle = 0x4000, + .mask_ale = 0x2000, + .parts = nand_partitions, + .nr_parts = ARRAY_SIZE(nand_partitions), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, + .ecc_bits = 1, +}; + +static struct davinci_uart_config serial_config __initconst = { + .enabled_uarts = BIT(1), +}; + +static const uint32_t keymap[] = { + KEY(0, 0, KEY_NUMERIC_1), + KEY(0, 1, KEY_NUMERIC_2), + KEY(0, 2, KEY_NUMERIC_3), + KEY(0, 3, KEY_FN_F1), + KEY(0, 4, KEY_MENU), + + KEY(1, 0, KEY_NUMERIC_4), + KEY(1, 1, KEY_NUMERIC_5), + KEY(1, 2, KEY_NUMERIC_6), + KEY(1, 3, KEY_UP), + KEY(1, 4, KEY_FN_F2), + + KEY(2, 0, KEY_NUMERIC_7), + KEY(2, 1, KEY_NUMERIC_8), + KEY(2, 2, KEY_NUMERIC_9), + KEY(2, 3, KEY_LEFT), + KEY(2, 4, KEY_ENTER), + + KEY(3, 0, KEY_NUMERIC_STAR), + KEY(3, 1, KEY_NUMERIC_0), + KEY(3, 2, KEY_NUMERIC_POUND), + KEY(3, 3, KEY_DOWN), + KEY(3, 4, KEY_RIGHT), + + KEY(4, 0, KEY_FN_F3), + KEY(4, 1, KEY_FN_F4), + KEY(4, 2, KEY_MUTE), + KEY(4, 3, KEY_HOME), + KEY(4, 4, KEY_BACK), + + KEY(5, 0, KEY_VOLUMEDOWN), + KEY(5, 1, KEY_VOLUMEUP), + KEY(5, 2, KEY_F1), + KEY(5, 3, KEY_F2), + KEY(5, 4, KEY_F3), +}; + +static const struct matrix_keymap_data keymap_data = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct matrix_keypad_platform_data keypad_config = { + .keymap_data = &keymap_data, + .num_row_gpios = 6, + .num_col_gpios = 5, + .debounce_ms = 0, /* minimum */ + .active_low = 0, /* pull up realization */ + .no_autorepeat = 0, +}; + +static struct tnetv107x_device_info evm_device_info __initconst = { + .serial_config = &serial_config, + .mmc_config[1] = &mmc_config, /* controller 1 */ + .nand_config[0] = &nand_config, /* chip select 0 */ + .keypad_config = &keypad_config, +}; + +static __init void tnetv107x_evm_board_init(void) +{ + davinci_cfg_reg_list(sdio1_pins); + davinci_cfg_reg_list(uart1_pins); + + tnetv107x_devices_init(&evm_device_info); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init tnetv107x_evm_console_init(void) +{ + return add_preferred_console("ttyS", 0, "115200"); +} +console_initcall(tnetv107x_evm_console_init); +#endif + +MACHINE_START(TNETV107X, "TNETV107X EVM") + .boot_params = (TNETV107X_DDR_BASE + 0x100), + .map_io = tnetv107x_init, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = tnetv107x_evm_board_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 054c303caea..01ba080433d 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -236,7 +236,7 @@ static int __init clk_disable_unused(void) if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) continue; - pr_info("Clocks: disable unused %s\n", ck->name); + pr_debug("Clocks: disable unused %s\n", ck->name); davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, (ck->flags & PSC_SWRSTDISABLE) ? @@ -287,6 +287,79 @@ static unsigned long clk_sysclk_recalc(struct clk *clk) return rate; } +int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned v; + struct pll_data *pll; + unsigned long input; + unsigned ratio = 0; + + /* If this is the PLL base clock, wrong function to call */ + if (clk->pll_data) + return -EINVAL; + + /* There must be a parent... */ + if (WARN_ON(!clk->parent)) + return -EINVAL; + + /* ... the parent must be a PLL... */ + if (WARN_ON(!clk->parent->pll_data)) + return -EINVAL; + + /* ... and this clock must have a divider. */ + if (WARN_ON(!clk->div_reg)) + return -EINVAL; + + pll = clk->parent->pll_data; + + input = clk->parent->rate; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + input = pll->input_rate; + + if (input > rate) { + /* + * Can afford to provide an output little higher than requested + * only if maximum rate supported by hardware on this sysclk + * is known. + */ + if (clk->maxrate) { + ratio = DIV_ROUND_CLOSEST(input, rate); + if (input / ratio > clk->maxrate) + ratio = 0; + } + + if (ratio == 0) + ratio = DIV_ROUND_UP(input, rate); + + ratio--; + } + + if (ratio > PLLDIV_RATIO_MASK) + return -EINVAL; + + do { + v = __raw_readl(pll->base + PLLSTAT); + } while (v & PLLSTAT_GOSTAT); + + v = __raw_readl(pll->base + clk->div_reg); + v &= ~PLLDIV_RATIO_MASK; + v |= ratio | PLLDIV_EN; + __raw_writel(v, pll->base + clk->div_reg); + + v = __raw_readl(pll->base + PLLCMD); + v |= PLLCMD_GOSET; + __raw_writel(v, pll->base + PLLCMD); + + do { + v = __raw_readl(pll->base + PLLSTAT); + } while (v & PLLSTAT_GOSTAT); + + return 0; +} +EXPORT_SYMBOL(davinci_set_sysclk_rate); + static unsigned long clk_leafclk_recalc(struct clk *clk) { if (WARN_ON(!clk->parent)) diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 01e36483ac3..11099980b58 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -70,6 +70,9 @@ #include <linux/list.h> #include <asm/clkdev.h> +#define PLLSTAT_GOSTAT BIT(0) +#define PLLCMD_GOSET BIT(0) + struct pll_data { u32 phys_base; void __iomem *base; @@ -86,6 +89,7 @@ struct clk { struct module *owner; const char *name; unsigned long rate; + unsigned long maxrate; /* H/W supported max rate */ u8 usecount; u8 lpsc; u8 gpsc; @@ -118,6 +122,7 @@ struct clk { int davinci_clk_init(struct clk_lookup *clocks); int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, unsigned int mult, unsigned int postdiv); +int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index d3fa6de1e20..343de73161f 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -34,6 +34,8 @@ struct davinci_cpufreq { struct device *dev; struct clk *armclk; + struct clk *asyncclk; + unsigned long asyncrate; }; static struct davinci_cpufreq cpufreq; @@ -104,15 +106,27 @@ static int davinci_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* if moving to higher frequency, up the voltage beforehand */ - if (pdata->set_voltage && freqs.new > freqs.old) - pdata->set_voltage(idx); + if (pdata->set_voltage && freqs.new > freqs.old) { + ret = pdata->set_voltage(idx); + if (ret) + goto out; + } ret = clk_set_rate(armclk, idx); + if (ret) + goto out; + + if (cpufreq.asyncclk) { + ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); + if (ret) + goto out; + } /* if moving to lower freq, lower the voltage after lowering freq */ if (pdata->set_voltage && freqs.new < freqs.old) pdata->set_voltage(idx); +out: cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); return ret; @@ -185,6 +199,7 @@ static struct cpufreq_driver davinci_driver = { static int __init davinci_cpufreq_probe(struct platform_device *pdev) { struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; + struct clk *asyncclk; if (!pdata) return -EINVAL; @@ -199,6 +214,12 @@ static int __init davinci_cpufreq_probe(struct platform_device *pdev) return PTR_ERR(cpufreq.armclk); } + asyncclk = clk_get(cpufreq.dev, "async"); + if (!IS_ERR(asyncclk)) { + cpufreq.asyncclk = asyncclk; + cpufreq.asyncrate = clk_get_rate(asyncclk); + } + return cpufreq_register_driver(&davinci_driver); } @@ -206,6 +227,9 @@ static int __exit davinci_cpufreq_remove(struct platform_device *pdev) { clk_put(cpufreq.armclk); + if (cpufreq.asyncclk) + clk_put(cpufreq.asyncclk); + return cpufreq_unregister_driver(&davinci_driver); } diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 23e9eda5a37..ec23ab47362 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -1024,7 +1024,6 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { [IRQ_DA8XX_EVTOUT4] = 7, [IRQ_DA8XX_EVTOUT5] = 7, [IRQ_DA8XX_EVTOUT6] = 7, - [IRQ_DA8XX_EVTOUT6] = 7, [IRQ_DA8XX_EVTOUT7] = 7, [IRQ_DA8XX_CCINT0] = 7, [IRQ_DA8XX_CCERRINT] = 7, @@ -1042,11 +1041,7 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { [IRQ_DA8XX_TINT34_1] = 7, [IRQ_DA8XX_UARTINT0] = 7, [IRQ_DA8XX_KEYMGRINT] = 7, - [IRQ_DA8XX_SECINT] = 7, - [IRQ_DA8XX_SECKEYERR] = 7, [IRQ_DA830_MPUERR] = 7, - [IRQ_DA830_IOPUERR] = 7, - [IRQ_DA830_BOOTCFGERR] = 7, [IRQ_DA8XX_CHIPINT0] = 7, [IRQ_DA8XX_CHIPINT1] = 7, [IRQ_DA8XX_CHIPINT2] = 7, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 6b8331bf8cf..63916b90276 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -86,6 +86,8 @@ static struct clk pll0_sysclk3 = { .parent = &pll0_clk, .flags = CLK_PLL, .div_reg = PLLDIV3, + .set_rate = davinci_set_sysclk_rate, + .maxrate = 100000000, }; static struct clk pll0_sysclk4 = { @@ -323,12 +325,19 @@ static struct clk lcdc_clk = { .gpsc = 1, }; -static struct clk mmcsd_clk = { - .name = "mmcsd", +static struct clk mmcsd0_clk = { + .name = "mmcsd0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC0_MMC_SD, }; +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_MMC_SD1, + .gpsc = 1, +}; + static struct clk aemif_clk = { .name = "aemif", .parent = &pll0_sysclk3, @@ -375,7 +384,8 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("da8xx_lcdc.0", NULL, &lcdc_clk), - CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, NULL, NULL), }; @@ -572,15 +582,9 @@ const short da850_cpgmac_pins[] __initdata = { DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -const short da850_rmii_pins[] __initdata = { - DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, - DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, - DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, - DA850_MDIO_D, + DA850_MDIO_D, DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, DA850_RMII_RXER, + DA850_RMII_MHZ_50_CLK, -1 }; @@ -607,27 +611,19 @@ const short da850_mmcsd0_pins[] __initdata = { -1 }; -const short da850_nand_pins[] __initdata = { - DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4, - DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0, - DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4, - DA850_NEMA_WE, DA850_NEMA_OE, - -1 -}; - -const short da850_nor_pins[] __initdata = { +const short da850_emif25_pins[] __initdata = { DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, - DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1, - DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5, - DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9, - DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13, - DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1, - DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5, - DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9, - DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13, - DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17, - DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21, - DA850_EMA_A_22, DA850_EMA_A_23, + DA850_NEMA_CS_3, DA850_NEMA_CS_4, DA850_NEMA_WE, DA850_NEMA_OE, + DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, + DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, + DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, + DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, + DA850_EMA_A_0, DA850_EMA_A_1, DA850_EMA_A_2, DA850_EMA_A_3, + DA850_EMA_A_4, DA850_EMA_A_5, DA850_EMA_A_6, DA850_EMA_A_7, + DA850_EMA_A_8, DA850_EMA_A_9, DA850_EMA_A_10, DA850_EMA_A_11, + DA850_EMA_A_12, DA850_EMA_A_13, DA850_EMA_A_14, DA850_EMA_A_15, + DA850_EMA_A_16, DA850_EMA_A_17, DA850_EMA_A_18, DA850_EMA_A_19, + DA850_EMA_A_20, DA850_EMA_A_21, DA850_EMA_A_22, DA850_EMA_A_23, -1 }; @@ -643,7 +639,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_EVTOUT4] = 7, [IRQ_DA8XX_EVTOUT5] = 7, [IRQ_DA8XX_EVTOUT6] = 7, - [IRQ_DA8XX_EVTOUT6] = 7, [IRQ_DA8XX_EVTOUT7] = 7, [IRQ_DA8XX_CCINT0] = 7, [IRQ_DA8XX_CCERRINT] = 7, @@ -661,27 +656,7 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_TINT34_1] = 7, [IRQ_DA8XX_UARTINT0] = 7, [IRQ_DA8XX_KEYMGRINT] = 7, - [IRQ_DA8XX_SECINT] = 7, - [IRQ_DA8XX_SECKEYERR] = 7, [IRQ_DA850_MPUADDRERR0] = 7, - [IRQ_DA850_MPUPROTERR0] = 7, - [IRQ_DA850_IOPUADDRERR0] = 7, - [IRQ_DA850_IOPUPROTERR0] = 7, - [IRQ_DA850_IOPUADDRERR1] = 7, - [IRQ_DA850_IOPUPROTERR1] = 7, - [IRQ_DA850_IOPUADDRERR2] = 7, - [IRQ_DA850_IOPUPROTERR2] = 7, - [IRQ_DA850_BOOTCFG_ADDR_ERR] = 7, - [IRQ_DA850_BOOTCFG_PROT_ERR] = 7, - [IRQ_DA850_MPUADDRERR1] = 7, - [IRQ_DA850_MPUPROTERR1] = 7, - [IRQ_DA850_IOPUADDRERR3] = 7, - [IRQ_DA850_IOPUPROTERR3] = 7, - [IRQ_DA850_IOPUADDRERR4] = 7, - [IRQ_DA850_IOPUPROTERR4] = 7, - [IRQ_DA850_IOPUADDRERR5] = 7, - [IRQ_DA850_IOPUPROTERR5] = 7, - [IRQ_DA850_MIOPU_BOOTCFG_ERR] = 7, [IRQ_DA8XX_CHIPINT0] = 7, [IRQ_DA8XX_CHIPINT1] = 7, [IRQ_DA8XX_CHIPINT2] = 7, @@ -722,8 +697,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_EHRPWM1] = 7, [IRQ_DA8XX_EHRPWM1TZ] = 7, [IRQ_DA850_SATAINT] = 7, - [IRQ_DA850_TINT12_2] = 7, - [IRQ_DA850_TINT34_2] = 7, [IRQ_DA850_TINTALL_2] = 7, [IRQ_DA8XX_ECAP0] = 7, [IRQ_DA8XX_ECAP1] = 7, @@ -751,8 +724,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA850_CCINT1] = 7, [IRQ_DA850_CCERRINT1] = 7, [IRQ_DA850_TCERRINT2] = 7, - [IRQ_DA850_TINT12_3] = 7, - [IRQ_DA850_TINT34_3] = 7, [IRQ_DA850_TINTALL_3] = 7, [IRQ_DA850_MCBSP0RINT] = 7, [IRQ_DA850_MCBSP0XINT] = 7, @@ -876,7 +847,7 @@ static const struct da850_opp da850_opp_300 = { .prediv = 1, .mult = 25, .postdiv = 2, - .cvdd_min = 1140000, + .cvdd_min = 1200000, .cvdd_max = 1320000, }; @@ -885,7 +856,7 @@ static const struct da850_opp da850_opp_200 = { .prediv = 1, .mult = 25, .postdiv = 3, - .cvdd_min = 1050000, + .cvdd_min = 1100000, .cvdd_max = 1160000, }; @@ -894,7 +865,7 @@ static const struct da850_opp da850_opp_96 = { .prediv = 1, .mult = 20, .postdiv = 5, - .cvdd_min = 950000, + .cvdd_min = 1000000, .cvdd_max = 1050000, }; @@ -954,10 +925,16 @@ static struct platform_device da850_cpufreq_device = { .dev = { .platform_data = &cpufreq_info, }, + .id = -1, }; -int __init da850_register_cpufreq(void) +int __init da850_register_cpufreq(char *async_clk) { + /* cpufreq driver can help keep an "async" clock constant */ + if (async_clk) + clk_add_alias("async", da850_cpufreq_device.name, + async_clk, NULL); + return platform_device_register(&da850_cpufreq_device); } @@ -1008,7 +985,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index) return 0; } #else -int __init da850_register_cpufreq(void) +int __init da850_register_cpufreq(char *async_clk) { return 0; } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 8cda729be27..9eec63070e0 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 @@ -41,7 +42,6 @@ #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 #define DA8XX_EMAC_RAM_OFFSET 0x0000 -#define DA8XX_MDIO_REG_OFFSET 0x4000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K void __iomem *da8xx_syscfg0_base; @@ -111,19 +111,21 @@ static const s8 da850_queue_priority_mapping[][2] = { {-1, -1} }; -static struct edma_soc_info da830_edma_info[] = { - { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, - .queue_priority_mapping = da8xx_queue_priority_mapping, - }, +static struct edma_soc_info da830_edma_cc0_info = { + .n_channel = 32, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = da8xx_queue_tc_mapping, + .queue_priority_mapping = da8xx_queue_priority_mapping, +}; + +static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { + &da830_edma_cc0_info, }; -static struct edma_soc_info da850_edma_info[] = { +static struct edma_soc_info da850_edma_cc_info[] = { { .n_channel = 32, .n_region = 4, @@ -144,6 +146,11 @@ static struct edma_soc_info da850_edma_info[] = { }, }; +static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = { + &da850_edma_cc_info[0], + &da850_edma_cc_info[1], +}; + static struct resource da830_edma_resources[] = { { .name = "edma_cc0", @@ -248,18 +255,21 @@ static struct platform_device da850_edma_device = { .resource = da850_edma_resources, }; -int __init da8xx_register_edma(void) +int __init da830_register_edma(struct edma_rsv_info *rsv) { - struct platform_device *pdev; + da830_edma_cc0_info.rsv = rsv; - if (cpu_is_davinci_da830()) - pdev = &da830_edma_device; - else if (cpu_is_davinci_da850()) - pdev = &da850_edma_device; - else - return -ENODEV; + return platform_device_register(&da830_edma_device); +} - return platform_device_register(pdev); +int __init da850_register_edma(struct edma_rsv_info *rsv[2]) +{ + if (rsv) { + da850_edma_cc_info[0].rsv = rsv[0]; + da850_edma_cc_info[1].rsv = rsv[1]; + } + + return platform_device_register(&da850_edma_device); } static struct resource da8xx_i2c_resources0[] = { @@ -341,7 +351,7 @@ int __init da8xx_register_watchdog(void) static struct resource da8xx_emac_resources[] = { { .start = DA8XX_EMAC_CPPI_PORT_BASE, - .end = DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1, + .end = DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -370,7 +380,6 @@ struct emac_platform_data da8xx_emac_pdata = { .ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET, .ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET, .ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET, - .mdio_reg_offset = DA8XX_MDIO_REG_OFFSET, .ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; @@ -385,9 +394,34 @@ static struct platform_device da8xx_emac_device = { .resource = da8xx_emac_resources, }; +static struct resource da8xx_mdio_resources[] = { + { + .start = DA8XX_EMAC_MDIO_BASE, + .end = DA8XX_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da8xx_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(da8xx_mdio_resources), + .resource = da8xx_mdio_resources, +}; + int __init da8xx_register_emac(void) { - return platform_device_register(&da8xx_emac_device); + int ret; + + ret = platform_device_register(&da8xx_mdio_device); + if (ret < 0) + return ret; + ret = platform_device_register(&da8xx_emac_device); + if (ret < 0) + return ret; + ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev), + NULL, &da8xx_emac_device.dev); + return ret; } static struct resource da830_mcasp1_resources[] = { @@ -556,6 +590,44 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config) return platform_device_register(&da8xx_mmcsd0_device); } +#ifdef CONFIG_ARCH_DAVINCI_DA850 +static struct resource da850_mmcsd1_resources[] = { + { /* registers */ + .start = DA850_MMCSD1_BASE, + .end = DA850_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DA850_MMCSDINT0_1, + .end = IRQ_DA850_MMCSDINT0_1, + .flags = IORESOURCE_IRQ, + }, + { /* DMA RX */ + .start = EDMA_CTLR_CHAN(1, 28), + .end = EDMA_CTLR_CHAN(1, 28), + .flags = IORESOURCE_DMA, + }, + { /* DMA TX */ + .start = EDMA_CTLR_CHAN(1, 29), + .end = EDMA_CTLR_CHAN(1, 29), + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device da850_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .num_resources = ARRAY_SIZE(da850_mmcsd1_resources), + .resource = da850_mmcsd1_resources, +}; + +int __init da850_register_mmcsd1(struct davinci_mmc_config *config) +{ + da850_mmcsd1_device.dev.platform_data = config; + return platform_device_register(&da850_mmcsd1_device); +} +#endif + static struct resource da8xx_rtc_resources[] = { { .start = DA8XX_RTC_BASE, diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c new file mode 100644 index 00000000000..c9a86d8130d --- /dev/null +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -0,0 +1,370 @@ +/* + * Texas Instruments TNETV107X SoC devices + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/slab.h> + +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/tnetv107x.h> + +#include "clock.h" + +/* Base addresses for on-chip devices */ +#define TNETV107X_TPCC_BASE 0x01c00000 +#define TNETV107X_TPTC0_BASE 0x01c10000 +#define TNETV107X_TPTC1_BASE 0x01c10400 +#define TNETV107X_WDOG_BASE 0x08086700 +#define TNETV107X_TSC_BASE 0x08088500 +#define TNETV107X_SDIO0_BASE 0x08088700 +#define TNETV107X_SDIO1_BASE 0x08088800 +#define TNETV107X_KEYPAD_BASE 0x08088a00 +#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 +#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000 + +/* TNETV107X specific EDMA3 information */ +#define EDMA_TNETV107X_NUM_DMACH 64 +#define EDMA_TNETV107X_NUM_TCC 64 +#define EDMA_TNETV107X_NUM_PARAMENTRY 128 +#define EDMA_TNETV107X_NUM_EVQUE 2 +#define EDMA_TNETV107X_NUM_TC 2 +#define EDMA_TNETV107X_CHMAP_EXIST 0 +#define EDMA_TNETV107X_NUM_REGIONS 4 +#define TNETV107X_DMACH2EVENT_MAP0 0x3C0CE000u +#define TNETV107X_DMACH2EVENT_MAP1 0x000FFFFFu + +#define TNETV107X_DMACH_SDIO0_RX 26 +#define TNETV107X_DMACH_SDIO0_TX 27 +#define TNETV107X_DMACH_SDIO1_RX 28 +#define TNETV107X_DMACH_SDIO1_TX 29 + +static const s8 edma_tc_mapping[][2] = { + /* event queue no TC no */ + { 0, 0 }, + { 1, 1 }, + { -1, -1 } +}; + +static const s8 edma_priority_mapping[][2] = { + /* event queue no Prio */ + { 0, 3 }, + { 1, 7 }, + { -1, -1 } +}; + +static struct edma_soc_info edma_cc0_info = { + .n_channel = EDMA_TNETV107X_NUM_DMACH, + .n_region = EDMA_TNETV107X_NUM_REGIONS, + .n_slot = EDMA_TNETV107X_NUM_PARAMENTRY, + .n_tc = EDMA_TNETV107X_NUM_TC, + .n_cc = 1, + .queue_tc_mapping = edma_tc_mapping, + .queue_priority_mapping = edma_priority_mapping, +}; + +static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc0", + .start = TNETV107X_TPCC_BASE, + .end = TNETV107X_TPCC_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = TNETV107X_TPTC0_BASE, + .end = TNETV107X_TPTC0_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = TNETV107X_TPTC1_BASE, + .end = TNETV107X_TPTC1_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma0", + .start = IRQ_TNETV107X_TPCC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma0_err", + .start = IRQ_TNETV107X_TPCC_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device edma_device = { + .name = "edma", + .id = -1, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, + .dev.platform_data = tnetv107x_edma_info, +}; + +static struct plat_serial8250_port serial_data[] = { + { + .mapbase = TNETV107X_UART0_BASE, + .irq = IRQ_TNETV107X_UART0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_FIXED_TYPE | UPF_IOREMAP, + .type = PORT_AR7, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = TNETV107X_UART1_BASE, + .irq = IRQ_TNETV107X_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_FIXED_TYPE | UPF_IOREMAP, + .type = PORT_AR7, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = TNETV107X_UART2_BASE, + .irq = IRQ_TNETV107X_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_FIXED_TYPE | UPF_IOREMAP, + .type = PORT_AR7, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .flags = 0, + }, +}; + +struct platform_device tnetv107x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = serial_data, +}; + +static struct resource mmc0_resources[] = { + { /* Memory mapped registers */ + .start = TNETV107X_SDIO0_BASE, + .end = TNETV107X_SDIO0_BASE + 0x0ff, + .flags = IORESOURCE_MEM + }, + { /* MMC interrupt */ + .start = IRQ_TNETV107X_MMC0, + .flags = IORESOURCE_IRQ + }, + { /* SDIO interrupt */ + .start = IRQ_TNETV107X_SDIO0, + .flags = IORESOURCE_IRQ + }, + { /* DMA RX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX), + .flags = IORESOURCE_DMA + }, + { /* DMA TX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX), + .flags = IORESOURCE_DMA + }, +}; + +static struct resource mmc1_resources[] = { + { /* Memory mapped registers */ + .start = TNETV107X_SDIO1_BASE, + .end = TNETV107X_SDIO1_BASE + 0x0ff, + .flags = IORESOURCE_MEM + }, + { /* MMC interrupt */ + .start = IRQ_TNETV107X_MMC1, + .flags = IORESOURCE_IRQ + }, + { /* SDIO interrupt */ + .start = IRQ_TNETV107X_SDIO1, + .flags = IORESOURCE_IRQ + }, + { /* DMA RX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX), + .flags = IORESOURCE_DMA + }, + { /* DMA TX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX), + .flags = IORESOURCE_DMA + }, +}; + +static u64 mmc0_dma_mask = DMA_BIT_MASK(32); +static u64 mmc1_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device mmc_devices[2] = { + { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmc0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmc0_resources), + .resource = mmc0_resources + }, + { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmc1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources + }, +}; + +static const u32 emif_windows[] = { + TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE, + TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE, +}; + +static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M }; + +static struct resource wdt_resources[] = { + { + .start = TNETV107X_WDOG_BASE, + .end = TNETV107X_WDOG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device tnetv107x_wdt_device = { + .name = "tnetv107x_wdt", + .id = 0, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static int __init nand_init(int chipsel, struct davinci_nand_pdata *data) +{ + struct resource res[2]; + struct platform_device *pdev; + u32 range; + int ret; + + /* Figure out the resource range from the ale/cle masks */ + range = max(data->mask_cle, data->mask_ale); + range = PAGE_ALIGN(range + 4) - 1; + + if (range >= emif_window_sizes[chipsel]) + return -EINVAL; + + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->name = "davinci_nand"; + pdev->id = chipsel; + pdev->dev.platform_data = data; + + memset(res, 0, sizeof(res)); + + res[0].start = emif_windows[chipsel]; + res[0].end = res[0].start + range; + res[0].flags = IORESOURCE_MEM; + + res[1].start = TNETV107X_ASYNC_EMIF_CNTRL_BASE; + res[1].end = res[1].start + SZ_4K - 1; + res[1].flags = IORESOURCE_MEM; + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret < 0) { + kfree(pdev); + return ret; + } + + return platform_device_register(pdev); +} + +static struct resource keypad_resources[] = { + { + .start = TNETV107X_KEYPAD_BASE, + .end = TNETV107X_KEYPAD_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TNETV107X_KEYPAD, + .flags = IORESOURCE_IRQ, + .name = "press", + }, + { + .start = IRQ_TNETV107X_KEYPAD_FREE, + .flags = IORESOURCE_IRQ, + .name = "release", + }, +}; + +static struct platform_device keypad_device = { + .name = "tnetv107x-keypad", + .num_resources = ARRAY_SIZE(keypad_resources), + .resource = keypad_resources, +}; + +static struct resource tsc_resources[] = { + { + .start = TNETV107X_TSC_BASE, + .end = TNETV107X_TSC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TNETV107X_TSC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tsc_device = { + .name = "tnetv107x-ts", + .num_resources = ARRAY_SIZE(tsc_resources), + .resource = tsc_resources, +}; + +void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) +{ + int i; + + platform_device_register(&edma_device); + platform_device_register(&tnetv107x_wdt_device); + platform_device_register(&tsc_device); + + if (info->serial_config) + davinci_serial_init(info->serial_config); + + for (i = 0; i < 2; i++) + if (info->mmc_config[i]) { + mmc_devices[i].dev.platform_data = info->mmc_config[i]; + platform_device_register(&mmc_devices[i]); + } + + for (i = 0; i < 4; i++) + if (info->nand_config[i]) + nand_init(i, info->nand_config[i]); + + if (info->keypad_config) { + keypad_device.dev.platform_data = info->keypad_config; + platform_device_register(&keypad_device); + } +} diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 8b7201e4c79..22ebc64bc9d 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -213,7 +213,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c); /* Configure pull down control */ - __raw_writel((__raw_readl(pupdctl1) & ~0x400), + __raw_writel((__raw_readl(pupdctl1) & ~0xfc0), pupdctl1); mmcsd1_resources[0].start = DM365_MMCSD1_BASE; @@ -295,6 +295,18 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ +struct platform_device davinci_pcm_device = { + .name = "davinci-pcm-audio", + .id = -1, +}; + +static void davinci_init_pcm(void) +{ + platform_device_register(&davinci_pcm_device); +} + +/*-------------------------------------------------------------------------*/ + struct davinci_timer_instance davinci_timer_instance[2] = { { .base = DAVINCI_TIMER0_BASE, @@ -315,6 +327,7 @@ static int __init davinci_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ + davinci_init_pcm(); davinci_init_wdt(); return 0; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 383478116ef..9be261beae7 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -591,16 +591,18 @@ queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm355_edma_info[] = { - { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, - .queue_priority_mapping = queue_priority_mapping, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = queue_tc_mapping, + .queue_priority_mapping = queue_priority_mapping, +}; + +static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { @@ -767,8 +769,7 @@ static struct map_desc dm355_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a146849d78f..a12065e8726 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -691,7 +691,6 @@ static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM365_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; @@ -699,7 +698,7 @@ static struct emac_platform_data dm365_emac_pdata = { static struct resource dm365_emac_resources[] = { { .start = DM365_EMAC_BASE, - .end = DM365_EMAC_BASE + 0x47ff, + .end = DM365_EMAC_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -734,6 +733,21 @@ static struct platform_device dm365_emac_device = { .resource = dm365_emac_resources, }; +static struct resource dm365_mdio_resources[] = { + { + .start = DM365_EMAC_MDIO_BASE, + .end = DM365_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm365_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_mdio_resources), + .resource = dm365_mdio_resources, +}; + static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, @@ -822,17 +836,19 @@ dm365_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm365_edma_info[] = { - { - .n_channel = 64, - .n_region = 4, - .n_slot = 256, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm365_queue_tc_mapping, - .queue_priority_mapping = dm365_queue_priority_mapping, - .default_queue = EVENTQ_3, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 256, + .n_tc = 4, + .n_cc = 1, + .queue_tc_mapping = dm365_queue_tc_mapping, + .queue_priority_mapping = dm365_queue_priority_mapping, + .default_queue = EVENTQ_3, +}; + +static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { @@ -967,8 +983,7 @@ static struct map_desc dm365_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; @@ -1020,6 +1035,8 @@ static struct davinci_timer_info dm365_timer_info = { .clocksource_id = T0_TOP, }; +#define DM365_UART1_BASE (IO_PHYS + 0x106000) + static struct plat_serial8250_port dm365_serial_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, @@ -1030,7 +1047,7 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = { .regshift = 2, }, { - .mapbase = DAVINCI_UART1_BASE, + .mapbase = DM365_UART1_BASE, .irq = IRQ_UARTINT1, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, @@ -1216,7 +1233,12 @@ static int __init dm365_init_devices(void) davinci_cfg_reg(DM365_INT_EDMA_CC); platform_device_register(&dm365_edma_device); + + platform_device_register(&dm365_mdio_device); platform_device_register(&dm365_emac_device); + clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev), + NULL, &dm365_emac_device.dev); + /* Add isif clock alias */ clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL); platform_device_register(&dm365_vpss_device); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 7ad15208b84..0608dd776a1 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -322,7 +322,6 @@ static struct emac_platform_data dm644x_emac_pdata = { .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_1, }; @@ -330,7 +329,7 @@ static struct emac_platform_data dm644x_emac_pdata = { static struct resource dm644x_emac_resources[] = { { .start = DM644X_EMAC_BASE, - .end = DM644X_EMAC_BASE + 0x47ff, + .end = DM644X_EMAC_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -350,6 +349,21 @@ static struct platform_device dm644x_emac_device = { .resource = dm644x_emac_resources, }; +static struct resource dm644x_mdio_resources[] = { + { + .start = DM644X_EMAC_MDIO_BASE, + .end = DM644X_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm644x_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(dm644x_mdio_resources), + .resource = dm644x_mdio_resources, +}; + /* * Device specific mux setup * @@ -492,16 +506,18 @@ queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm644x_edma_info[] = { - { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, - .queue_priority_mapping = queue_priority_mapping, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = queue_tc_mapping, + .queue_priority_mapping = queue_priority_mapping, +}; + +static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { @@ -651,8 +667,7 @@ static struct map_desc dm644x_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00008000), .length = SZ_16K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; @@ -775,7 +790,12 @@ static int __init dm644x_init_devices(void) clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL); clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL); platform_device_register(&dm644x_edma_device); + + platform_device_register(&dm644x_mdio_device); platform_device_register(&dm644x_emac_device); + clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev), + NULL, &dm644x_emac_device.dev); + platform_device_register(&dm644x_vpss_device); platform_device_register(&dm644x_ccdc_dev); platform_device_register(&vpfe_capture_dev); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 94045656cff..1e0f809644b 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -358,7 +358,6 @@ static struct emac_platform_data dm646x_emac_pdata = { .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; @@ -366,7 +365,7 @@ static struct emac_platform_data dm646x_emac_pdata = { static struct resource dm646x_emac_resources[] = { { .start = DM646X_EMAC_BASE, - .end = DM646X_EMAC_BASE + 0x47ff, + .end = DM646X_EMAC_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -401,6 +400,21 @@ static struct platform_device dm646x_emac_device = { .resource = dm646x_emac_resources, }; +static struct resource dm646x_mdio_resources[] = { + { + .start = DM646X_EMAC_MDIO_BASE, + .end = DM646X_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm646x_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(dm646x_mdio_resources), + .resource = dm646x_mdio_resources, +}; + /* * Device specific mux setup * @@ -529,16 +543,18 @@ dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm646x_edma_info[] = { - { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm646x_queue_tc_mapping, - .queue_priority_mapping = dm646x_queue_priority_mapping, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .n_cc = 1, + .queue_tc_mapping = dm646x_queue_tc_mapping, + .queue_priority_mapping = dm646x_queue_priority_mapping, +}; + +static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { @@ -735,8 +751,7 @@ static struct map_desc dm646x_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; @@ -877,6 +892,13 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, platform_device_register(&vpif_capture_dev); } +int __init dm646x_init_edma(struct edma_rsv_info *rsv) +{ + edma_cc0_info.rsv = rsv; + + return platform_device_register(&dm646x_edma_device); +} + void __init dm646x_init(void) { dm646x_board_setup_refclk(&ref_clk); @@ -888,8 +910,11 @@ static int __init dm646x_init_devices(void) if (!cpu_is_davinci_dm646x()) return 0; - platform_device_register(&dm646x_edma_device); + platform_device_register(&dm646x_mdio_device); platform_device_register(&dm646x_emac_device); + clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev), + NULL, &dm646x_emac_device.dev); + return 0; } postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index d33827aadda..6b9669869c4 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -99,8 +99,6 @@ #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 -#define EDMA_MAX_CC 2 - /*****************************************************************************/ @@ -207,6 +205,18 @@ static inline void edma_parm_or(unsigned ctlr, int offset, int param_no, edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or); } +static inline void set_bits(int offset, int len, unsigned long *p) +{ + for (; len > 0; len--) + set_bit(offset + (len - 1), p); +} + +static inline void clear_bits(int offset, int len, unsigned long *p) +{ + for (; len > 0; len--) + clear_bit(offset + (len - 1), p); +} + /*****************************************************************************/ /* actual number of DMA channels and slots on this silicon */ @@ -344,10 +354,12 @@ static int irq2ctlr(int irq) static irqreturn_t dma_irq_handler(int irq, void *data) { int i; - unsigned ctlr; + int ctlr; unsigned int cnt = 0; ctlr = irq2ctlr(irq); + if (ctlr < 0) + return IRQ_NONE; dev_dbg(data, "dma_irq_handler\n"); @@ -398,10 +410,12 @@ static irqreturn_t dma_irq_handler(int irq, void *data) static irqreturn_t dma_ccerr_handler(int irq, void *data) { int i; - unsigned ctlr; + int ctlr; unsigned int cnt = 0; ctlr = irq2ctlr(irq); + if (ctlr < 0) + return IRQ_NONE; dev_dbg(data, "dma_ccerr_handler\n"); @@ -1376,11 +1390,13 @@ EXPORT_SYMBOL(edma_clear_event); static int __init edma_probe(struct platform_device *pdev) { - struct edma_soc_info *info = pdev->dev.platform_data; + struct edma_soc_info **info = pdev->dev.platform_data; const s8 (*queue_priority_mapping)[2]; const s8 (*queue_tc_mapping)[2]; - int i, j, found = 0; + int i, j, off, ln, found = 0; int status = -1; + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; int irq[EDMA_MAX_CC] = {0, 0}; int err_irq[EDMA_MAX_CC] = {0, 0}; struct resource *r[EDMA_MAX_CC] = {NULL}; @@ -1395,7 +1411,7 @@ static int __init edma_probe(struct platform_device *pdev) sprintf(res_name, "edma_cc%d", j); r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); - if (!r[j]) { + if (!r[j] || !info[j]) { if (found) break; else @@ -1426,13 +1442,14 @@ static int __init edma_probe(struct platform_device *pdev) } memset(edma_cc[j], 0, sizeof(struct edma)); - edma_cc[j]->num_channels = min_t(unsigned, info[j].n_channel, + edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, EDMA_MAX_DMACH); - edma_cc[j]->num_slots = min_t(unsigned, info[j].n_slot, + edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot, EDMA_MAX_PARAMENTRY); - edma_cc[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC); + edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc, + EDMA_MAX_CC); - edma_cc[j]->default_queue = info[j].default_queue; + edma_cc[j]->default_queue = info[j]->default_queue; if (!edma_cc[j]->default_queue) edma_cc[j]->default_queue = EVENTQ_1; @@ -1447,6 +1464,31 @@ static int __init edma_probe(struct platform_device *pdev) memset(edma_cc[j]->edma_unused, 0xff, sizeof(edma_cc[j]->edma_unused)); + if (info[j]->rsv) { + + /* Clear the reserved channels in unused list */ + rsv_chans = info[j]->rsv->rsv_chans; + if (rsv_chans) { + for (i = 0; rsv_chans[i][0] != -1; i++) { + off = rsv_chans[i][0]; + ln = rsv_chans[i][1]; + clear_bits(off, ln, + edma_cc[j]->edma_unused); + } + } + + /* Set the reserved slots in inuse list */ + rsv_slots = info[j]->rsv->rsv_slots; + if (rsv_slots) { + for (i = 0; rsv_slots[i][0] != -1; i++) { + off = rsv_slots[i][0]; + ln = rsv_slots[i][1]; + set_bits(off, ln, + edma_cc[j]->edma_inuse); + } + } + } + sprintf(irq_name, "edma%d", j); irq[j] = platform_get_irq_byname(pdev, irq_name); edma_cc[j]->irq_res_start = irq[j]; @@ -1476,8 +1518,8 @@ static int __init edma_probe(struct platform_device *pdev) for (i = 0; i < edma_cc[j]->num_channels; i++) map_dmach_queue(j, i, EVENTQ_1); - queue_tc_mapping = info[j].queue_tc_mapping; - queue_priority_mapping = info[j].queue_priority_mapping; + queue_tc_mapping = info[j]->queue_tc_mapping; + queue_priority_mapping = info[j]->queue_priority_mapping; /* Event queue to TC mapping */ for (i = 0; queue_tc_mapping[i][0] != -1; i++) @@ -1496,7 +1538,7 @@ static int __init edma_probe(struct platform_device *pdev) if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) map_dmach_param(j); - for (i = 0; i < info[j].n_region; i++) { + for (i = 0; i < info[j]->n_region; i++) { edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); edma_write_array(j, EDMA_QRAE, i, 0x0); diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c new file mode 100644 index 00000000000..d10298620e2 --- /dev/null +++ b/arch/arm/mach-davinci/gpio-tnetv107x.c @@ -0,0 +1,205 @@ +/* + * Texas Instruments TNETV107X GPIO Controller + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <mach/common.h> +#include <mach/tnetv107x.h> + +struct tnetv107x_gpio_regs { + u32 idver; + u32 data_in[3]; + u32 data_out[3]; + u32 direction[3]; + u32 enable[3]; +}; + +#define gpio_reg_index(gpio) ((gpio) >> 5) +#define gpio_reg_bit(gpio) BIT((gpio) & 0x1f) + +#define gpio_reg_rmw(reg, mask, val) \ + __raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg)) + +#define gpio_reg_set_bit(reg, gpio) \ + gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio)) + +#define gpio_reg_clear_bit(reg, gpio) \ + gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0) + +#define gpio_reg_get_bit(reg, gpio) \ + (__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio)) + +#define chip2controller(chip) \ + container_of(chip, struct davinci_gpio_controller, chip) + +#define TNETV107X_GPIO_CTLRS DIV_ROUND_UP(TNETV107X_N_GPIO, 32) + +static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS]; + +static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + gpio_reg_set_bit(®s->enable, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); + + return 0; +} + +static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + gpio_reg_clear_bit(®s->enable, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); +} + +static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + gpio_reg_set_bit(®s->direction, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); + + return 0; +} + +static int tnetv107x_gpio_dir_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + if (value) + gpio_reg_set_bit(®s->data_out, gpio); + else + gpio_reg_clear_bit(®s->data_out, gpio); + + gpio_reg_clear_bit(®s->direction, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); + + return 0; +} + +static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + int ret; + + ret = gpio_reg_get_bit(®s->data_in, gpio); + + return ret ? 1 : 0; +} + +static void tnetv107x_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + if (value) + gpio_reg_set_bit(®s->data_out, gpio); + else + gpio_reg_clear_bit(®s->data_out, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); +} + +static int __init tnetv107x_gpio_setup(void) +{ + int i, base; + unsigned ngpio; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct tnetv107x_gpio_regs *regs; + struct davinci_gpio_controller *ctlr; + + if (soc_info->gpio_type != GPIO_TYPE_TNETV107X) + return 0; + + ngpio = soc_info->gpio_num; + if (ngpio == 0) { + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(TNETV107X_N_GPIO < ngpio)) + ngpio = TNETV107X_N_GPIO; + + regs = ioremap(soc_info->gpio_base, SZ_4K); + if (WARN_ON(!regs)) + return -EINVAL; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { + ctlr = &chips[i]; + + ctlr->chip.label = "tnetv107x"; + ctlr->chip.can_sleep = 0; + ctlr->chip.base = base; + ctlr->chip.ngpio = ngpio - base; + if (ctlr->chip.ngpio > 32) + ctlr->chip.ngpio = 32; + + ctlr->chip.request = tnetv107x_gpio_request; + ctlr->chip.free = tnetv107x_gpio_free; + ctlr->chip.direction_input = tnetv107x_gpio_dir_in; + ctlr->chip.get = tnetv107x_gpio_get; + ctlr->chip.direction_output = tnetv107x_gpio_dir_out; + ctlr->chip.set = tnetv107x_gpio_set; + + spin_lock_init(&ctlr->lock); + + ctlr->regs = regs; + ctlr->set_data = ®s->data_out[i]; + ctlr->clr_data = ®s->data_out[i]; + ctlr->in_data = ®s->data_in[i]; + + gpiochip_add(&ctlr->chip); + } + + soc_info->gpio_ctlrs = chips; + soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); + return 0; +} +pure_initcall(tnetv107x_gpio_setup); diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h new file mode 100644 index 00000000000..05b29344309 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/aemif.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci AEMIF support + * + * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_AEMIF_H +#define _MACH_DAVINCI_AEMIF_H + +#define NRCSR_OFFSET 0x00 +#define AWCCR_OFFSET 0x04 +#define A1CR_OFFSET 0x10 + +#define ACR_ASIZE_MASK 0x3 +#define ACR_EW_MASK BIT(30) +#define ACR_SS_MASK BIT(31) + +/* All timings in nanoseconds */ +struct davinci_aemif_timing { + u8 wsetup; + u8 wstrobe; + u8 whold; + + u8 rsetup; + u8 rstrobe; + u8 rhold; + + u8 ta; +}; + +int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs); +#endif diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index 834725f1e81..9aa240909a2 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -52,7 +52,8 @@ struct snd_platform_data { u32 tx_dma_offset; u32 rx_dma_offset; - enum dma_event_q eventq_no; /* event queue number */ + enum dma_event_q asp_chan_q; /* event queue number for ASP channel */ + enum dma_event_q ram_chan_q; /* event queue number for RAM channel */ unsigned int codec_fmt; /* * Allowing this is more efficient and eliminates left and right swaps @@ -63,6 +64,49 @@ struct snd_platform_data { unsigned sram_size_playback; unsigned sram_size_capture; + /* + * If McBSP peripheral gets the clock from an external pin, + * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR + * and MCBSP_CLKS. + * Depending on different hardware connections it is possible + * to use this setting to change the behaviour of McBSP + * driver. The dm365_clk_input_pin enum is available for dm365 + */ + int clk_input_pin; + + /* + * This flag works when both clock and FS are outputs for the cpu + * and makes clock more accurate (FS is not symmetrical and the + * clock is very fast. + * The clock becoming faster is named + * i2s continuous serial clock (I2S_SCK) and it is an externally + * visible bit clock. + * + * first line : WordSelect + * second line : ContinuousSerialClock + * third line: SerialData + * + * SYMMETRICAL APPROACH: + * _______________________ LEFT + * _| RIGHT |______________________| + * _ _ _ _ _ _ _ _ + * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ + * _ _ _ _ _ _ _ _ + * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ + * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ + * + * ACCURATE CLOCK APPROACH: + * ______________ LEFT + * _| RIGHT |_______________________________| + * _ _ _ _ _ _ _ _ _ + * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | + * _ _ _ _ dummy cycles + * _/ \_ ... _/ \_/ \_ ... _/ \__________________ + * \_/ \_/ \_/ \_/ + * + */ + bool i2s_accurate_sck; + /* McASP specific fields */ int tdm_slots; u8 op_mode; @@ -78,6 +122,11 @@ enum { MCASP_VERSION_2, /* DA8xx/OMAPL1x */ }; +enum dm365_clk_input_pin { + MCBSP_CLKR = 0, /* DM365 */ + MCBSP_CLKS, +}; + #define INACTIVE_MODE 0 #define TX_MODE 1 #define RX_MODE 2 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 1b31a9aa8fb..4247b3f53b3 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -67,7 +67,8 @@ extern void __iomem *da8xx_syscfg1_base; void __init da830_init(void); void __init da850_init(void); -int da8xx_register_edma(void); +int da830_register_edma(struct edma_rsv_info *rsv); +int da850_register_edma(struct edma_rsv_info *rsv[2]); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); @@ -75,9 +76,10 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); +int da850_register_mmcsd1(struct davinci_mmc_config *config); void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); -int da850_register_cpufreq(void); +int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); @@ -120,11 +122,9 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_cpgmac_pins[]; -extern const short da850_rmii_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; -extern const short da850_nand_pins[]; -extern const short da850_nor_pins[]; +extern const short da850_emif25_pins[]; #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 3cd93a801d9..9f1befc5ac3 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -17,22 +17,54 @@ */ #include <linux/serial_reg.h> + +#include <asm/memory.h> + +#include <mach/serial.h> + #define UART_SHIFT 2 - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x01000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base -#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) -#error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \ - defined(CONFIG_MACH_DAVINCI_DA850_EVM) - orr \rx, \rx, #0x00d00000 @ physical base address - orr \rx, \rx, #0x0000d000 @ of UART 2 -#else - orr \rx, \rx, #0x00c20000 @ UART 0 -#endif + .pushsection .data +davinci_uart_phys: .word 0 +davinci_uart_virt: .word 0 + .popsection + + .macro addruart, rp, rv + + /* Use davinci_uart_phys/virt if already configured */ +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldrne \rp, =davinci_uart_phys + add \rv, \rp, #4 @ davinci_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 + bne 99f @ already configured + + /* Check the debug UART address set in uncompress.h */ + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + + /* Copy uart phys address from decompressor uart info */ + ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldrne \rv, =davinci_uart_phys + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #0] + str \rp, [\rv] + + /* Copy uart virt address from decompressor uart info */ + ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldrne \rv, =davinci_uart_virt + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #4] + str \rp, [\rv] + + b 10b +99: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index ea5df3b49ec..2563bf4e93a 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -21,10 +21,10 @@ #include <media/davinci/vpfe_capture.h> #define DM365_EMAC_BASE (0x01D07000) +#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) #define DM365_EMAC_CNTRL_OFFSET (0x0000) #define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) #define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) -#define DM365_EMAC_MDIO_OFFSET (0x4000) #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) /* Base of key scan register bank */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 6fca568a0fd..5a1b26d4e68 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -28,10 +28,10 @@ #include <media/davinci/vpfe_capture.h> #define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) #define DM644X_EMAC_CNTRL_OFFSET (0x0000) #define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) #define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM644X_EMAC_MDIO_OFFSET (0x4000) #define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) #define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000 diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index add6f794a36..7a27f3f1391 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -19,10 +19,10 @@ #include <linux/davinci_emac.h> #define DM646X_EMAC_BASE (0x01C80000) +#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) #define DM646X_EMAC_CNTRL_OFFSET (0x0000) #define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) #define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM646X_EMAC_MDIO_OFFSET (0x4000) #define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) #define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 @@ -32,6 +32,7 @@ void __init dm646x_init(void); void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); void __init dm646x_board_setup_refclk(struct clk *clk); +int __init dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index ced3092af5b..dc10ef6cf57 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -230,6 +230,8 @@ enum sync_dimension { #define EDMA_CONT_PARAMS_FIXED_EXACT 1002 #define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 +#define EDMA_MAX_CC 2 + /* alloc/free DMA channels and their dedicated parameter RAM slots */ int edma_alloc_channel(int channel, void (*callback)(unsigned channel, u16 ch_status, void *data), @@ -269,6 +271,12 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); +struct edma_rsv_info { + + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; +}; + /* platform_data for EDMA driver */ struct edma_soc_info { @@ -280,6 +288,9 @@ struct edma_soc_info { unsigned n_cc; enum dma_event_q default_queue; + /* Resource reservation for other cores */ + struct edma_rsv_info *rsv; + const s8 (*queue_tc_mapping)[2]; const s8 (*queue_priority_mapping)[2]; }; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index 504cc180a60..fbece126c2b 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -25,6 +25,7 @@ enum davinci_gpio_type { GPIO_TYPE_DAVINCI = 0, + GPIO_TYPE_TNETV107X, }; /* @@ -87,9 +88,13 @@ static inline u32 __gpio_mask(unsigned gpio) return 1 << (gpio % 32); } -/* The get/set/clear functions will inline when called with constant +/* + * The get/set/clear functions will inline when called with constant * parameters referencing built-in GPIOs, for low-overhead bitbanging. * + * gpio_set_value() will inline only on traditional Davinci style controllers + * with distinct set/clear registers. + * * Otherwise, calls with variable parameters or referencing external * GPIOs (e.g. on GPIO expander chips) use outlined functions. */ @@ -100,12 +105,15 @@ static inline void gpio_set_value(unsigned gpio, int value) u32 mask; ctlr = __gpio_to_controller(gpio); - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; + + if (ctlr->set_data != ctlr->clr_data) { + mask = __gpio_mask(gpio); + if (value) + __raw_writel(mask, ctlr->set_data); + else + __raw_writel(mask, ctlr->clr_data); + return; + } } __gpio_set_value(gpio, value); diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index a91edfb8bee..22eb97c1c30 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -48,19 +48,16 @@ * below 128M */ static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) +__arch_adjust_zones(unsigned long *size, unsigned long *holes) { unsigned int sz = (128<<20) >> PAGE_SHIFT; - if (node != 0) - sz = 0; - size[1] = size[0] - sz; size[0] = sz; } -#define arch_adjust_zones(node, zone_size, holes) \ - if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes) +#define arch_adjust_zones(zone_size, holes) \ + if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20)) diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index b2ad8090bd1..025151049f0 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -30,9 +30,6 @@ #include <linux/mtd/nand.h> -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 #define NANDFCR_OFFSET 0x60 #define NANDFSR_OFFSET 0x64 #define NANDF1ECC_OFFSET 0x70 @@ -83,6 +80,9 @@ struct davinci_nand_pdata { /* platform_data */ /* Main and mirror bbt descriptor overrides */ struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; + + /* Access timings */ + struct davinci_aemif_timing *timing; }; #endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 983da6e4554..62b0858f68c 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -172,6 +172,7 @@ #define DA8XX_LPSC1_UART2 13 #define DA8XX_LPSC1_LCDC 16 #define DA8XX_LPSC1_PWM 17 +#define DA850_LPSC1_MMC_SD1 18 #define DA8XX_LPSC1_ECAP 20 #define DA830_LPSC1_EQEP 21 #define DA850_LPSC1_TPTC2 21 diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index f6c4f34909a..8051110b8ac 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -11,8 +11,19 @@ #ifndef __ASM_ARCH_SERIAL_H #define __ASM_ARCH_SERIAL_H +#include <asm/memory.h> + #include <mach/hardware.h> +/* + * Stolen area that contains debug uart physical and virtual addresses. These + * addresses are filled in by the uncompress.h code, and are used by the debug + * macros in debug-macro.S. + * + * This area sits just below the page tables (see arch/arm/kernel/head.S). + */ +#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) + #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -21,16 +32,26 @@ #define DA8XX_UART1_BASE (IO_PHYS + 0x10c000) #define DA8XX_UART2_BASE (IO_PHYS + 0x10d000) +#define TNETV107X_UART0_BASE 0x08108100 +#define TNETV107X_UART1_BASE 0x08088400 +#define TNETV107X_UART2_BASE 0x08108300 + +#define TNETV107X_UART0_VIRT IOMEM(0xfee08100) +#define TNETV107X_UART1_VIRT IOMEM(0xfed88400) +#define TNETV107X_UART2_VIRT IOMEM(0xfee08300) + /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 #define UART_DM646X_SCR_TX_WATERMARK 0x08 +#ifndef __ASSEMBLY__ struct davinci_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; }; extern int davinci_serial_init(struct davinci_uart_config *); +#endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h new file mode 100644 index 00000000000..5a681d880dc --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -0,0 +1,58 @@ +/* + * Texas Instruments TNETV107X SoC Specific Defines + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H +#define __ASM_ARCH_DAVINCI_TNETV107X_H + +#include <asm/sizes.h> + +#define TNETV107X_DDR_BASE 0x80000000 + +/* + * Fixed mapping for early init starts here. If low-level debug is enabled, + * this area also gets mapped via io_pg_offset and io_phys by the boot code. + * To fit in with the io_pg_offset calculation, the io base address selected + * here _must_ be a multiple of 2^20. + */ +#define TNETV107X_IO_BASE 0x08000000 +#define TNETV107X_IO_VIRT (IO_VIRT + SZ_1M) + +#define TNETV107X_N_GPIO 65 + +#ifndef __ASSEMBLY__ + +#include <linux/serial_8250.h> +#include <linux/input/matrix_keypad.h> + +#include <mach/mmc.h> +#include <mach/nand.h> +#include <mach/serial.h> + +struct tnetv107x_device_info { + struct davinci_uart_config *serial_config; + struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ + struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ + struct matrix_keypad_platform_data *keypad_config; +}; + +extern struct platform_device tnetv107x_wdt_device; +extern struct platform_device tnetv107x_serial_device; + +extern void __init tnetv107x_init(void); +extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *); +extern void __init tnetv107x_irq_init(void); + +#endif + +#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 33796b4db17..47723e8d75a 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -1,8 +1,17 @@ /* * Serial port stubs for kernel decompress status messages * - * Author: Anant Gole - * (C) Copyright (C) 2006, Texas Instruments, Inc + * Initially based on: + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Original copyrights follow. + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -11,30 +20,17 @@ #include <linux/types.h> #include <linux/serial_reg.h> -#include <mach/serial.h> #include <asm/mach-types.h> -extern unsigned int __machine_arch_type; +#include <mach/serial.h> static u32 *uart; - -static u32 *get_uart_base(void) -{ - if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM || - __machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM) - return (u32 *)DA8XX_UART2_BASE; - else - return (u32 *)DAVINCI_UART0_BASE; -} +static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); /* PORT_16C550A, in polled non-fifo mode */ - static void putc(char c) { - if (!uart) - uart = get_uart_base(); - while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -42,12 +38,63 @@ static void putc(char c) static inline void flush(void) { - if (!uart) - uart = get_uart_base(); - while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } -#define arch_decomp_setup() +static inline void set_uart_info(u32 phys, void * __iomem virt) +{ + uart = (u32 *)phys; + uart_info[0] = phys; + uart_info[1] = (u32)virt; +} + +#define _DEBUG_LL_ENTRY(machine, phys, virt) \ + if (machine_is_##machine()) { \ + set_uart_info(phys, virt); \ + break; \ + } + +#define DEBUG_LL_DAVINCI(machine, port) \ + _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \ + IO_ADDRESS(DAVINCI_UART##port##_BASE)) + +#define DEBUG_LL_DA8XX(machine, port) \ + _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \ + IO_ADDRESS(DA8XX_UART##port##_BASE)) + +#define DEBUG_LL_TNETV107X(machine, port) \ + _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \ + TNETV107X_UART##port##_VIRT) + +static inline void __arch_decomp_setup(unsigned long arch_id) +{ + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* Davinci boards */ + DEBUG_LL_DAVINCI(davinci_evm, 0); + DEBUG_LL_DAVINCI(sffsdr, 0); + DEBUG_LL_DAVINCI(neuros_osd2, 0); + DEBUG_LL_DAVINCI(davinci_dm355_evm, 0); + DEBUG_LL_DAVINCI(dm355_leopard, 0); + DEBUG_LL_DAVINCI(davinci_dm6467_evm, 0); + DEBUG_LL_DAVINCI(davinci_dm365_evm, 0); + + /* DA8xx boards */ + DEBUG_LL_DA8XX(davinci_da830_evm, 2); + DEBUG_LL_DA8XX(davinci_da850_evm, 2); + DEBUG_LL_DA8XX(mityomapl138, 1); + DEBUG_LL_DA8XX(omapl138_hawkboard, 2); + + /* TNETV107x boards */ + DEBUG_LL_TNETV107X(tnetv107x, 1); + } while (0); +} + +#define arch_decomp_setup() __arch_decomp_setup(arch_id) #define arch_decomp_wdog() diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c new file mode 100644 index 00000000000..daeae06430b --- /dev/null +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -0,0 +1,760 @@ +/* + * Texas Instruments TNETV107X SoC Support + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/platform_device.h> + +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/time.h> +#include <mach/cputype.h> +#include <mach/psc.h> +#include <mach/cp_intc.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/hardware.h> +#include <mach/tnetv107x.h> + +#include "clock.h" +#include "mux.h" + +/* Base addresses for on-chip devices */ +#define TNETV107X_INTC_BASE 0x03000000 +#define TNETV107X_TIMER0_BASE 0x08086500 +#define TNETV107X_TIMER1_BASE 0x08086600 +#define TNETV107X_CHIP_CFG_BASE 0x08087000 +#define TNETV107X_GPIO_BASE 0x08088000 +#define TNETV107X_CLOCK_CONTROL_BASE 0x0808a000 +#define TNETV107X_PSC_BASE 0x0808b000 + +/* Reference clock frequencies */ +#define OSC_FREQ_ONCHIP (24000 * 1000) +#define OSC_FREQ_OFFCHIP_SYS (25000 * 1000) +#define OSC_FREQ_OFFCHIP_ETH (25000 * 1000) +#define OSC_FREQ_OFFCHIP_TDM (19200 * 1000) + +#define N_PLLS 3 + +/* Clock Control Registers */ +struct clk_ctrl_regs { + u32 pll_bypass; + u32 _reserved0; + u32 gem_lrst; + u32 _reserved1; + u32 pll_unlock_stat; + u32 sys_unlock; + u32 eth_unlock; + u32 tdm_unlock; +}; + +/* SSPLL Registers */ +struct sspll_regs { + u32 modes; + u32 post_div; + u32 pre_div; + u32 mult_factor; + u32 divider_range; + u32 bw_divider; + u32 spr_amount; + u32 spr_rate_div; + u32 diag; +}; + +/* Watchdog Timer Registers */ +struct wdt_regs { + u32 kick_lock; + u32 kick; + u32 change_lock; + u32 change ; + u32 disable_lock; + u32 disable; + u32 prescale_lock; + u32 prescale; +}; + +static struct clk_ctrl_regs __iomem *clk_ctrl_regs; + +static struct sspll_regs __iomem *sspll_regs[N_PLLS]; +static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 }; + +/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */ +static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) }; + +/* offchip (external) reference clock frequencies */ +static u32 pll_ext_freq[] = { + OSC_FREQ_OFFCHIP_SYS, + OSC_FREQ_OFFCHIP_TDM, + OSC_FREQ_OFFCHIP_ETH +}; + +/* PSC control registers */ +static u32 psc_regs[] = { TNETV107X_PSC_BASE }; + +/* Host map for interrupt controller */ +static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 }; + +static unsigned long clk_sspll_recalc(struct clk *clk); + +/* Level 1 - the PLLs */ +#define define_pll_clk(cname, pll, divmask, base) \ + static struct pll_data pll_##cname##_data = { \ + .num = pll, \ + .div_ratio_mask = divmask, \ + .phys_base = base + \ + TNETV107X_CLOCK_CONTROL_BASE, \ + }; \ + static struct clk pll_##cname##_clk = { \ + .name = "pll_" #cname "_clk", \ + .pll_data = &pll_##cname##_data, \ + .flags = CLK_PLL, \ + .recalc = clk_sspll_recalc, \ + } + +define_pll_clk(sys, 0, 0x1ff, 0x600); +define_pll_clk(tdm, 1, 0x0ff, 0x200); +define_pll_clk(eth, 2, 0x0ff, 0x400); + +/* Level 2 - divided outputs from the PLLs */ +#define define_pll_div_clk(pll, cname, div) \ + static struct clk pll##_##cname##_clk = { \ + .name = #pll "_" #cname "_clk",\ + .parent = &pll_##pll##_clk, \ + .flags = CLK_PLL, \ + .div_reg = PLLDIV##div, \ + } + +define_pll_div_clk(sys, arm1176, 1); +define_pll_div_clk(sys, dsp, 2); +define_pll_div_clk(sys, ddr, 3); +define_pll_div_clk(sys, full, 4); +define_pll_div_clk(sys, lcd, 5); +define_pll_div_clk(sys, vlynq_ref, 6); +define_pll_div_clk(sys, tsc, 7); +define_pll_div_clk(sys, half, 8); + +define_pll_div_clk(eth, 5mhz, 1); +define_pll_div_clk(eth, 50mhz, 2); +define_pll_div_clk(eth, 125mhz, 3); +define_pll_div_clk(eth, 250mhz, 4); +define_pll_div_clk(eth, 25mhz, 5); + +define_pll_div_clk(tdm, 0, 1); +define_pll_div_clk(tdm, extra, 2); +define_pll_div_clk(tdm, 1, 3); + + +/* Level 3 - LPSC gated clocks */ +#define __lpsc_clk(cname, _parent, mod, flg) \ + static struct clk clk_##cname = { \ + .name = #cname, \ + .parent = &_parent, \ + .lpsc = TNETV107X_LPSC_##mod,\ + .flags = flg, \ + } + +#define lpsc_clk_enabled(cname, parent, mod) \ + __lpsc_clk(cname, parent, mod, ALWAYS_ENABLED) + +#define lpsc_clk(cname, parent, mod) \ + __lpsc_clk(cname, parent, mod, 0) + +lpsc_clk_enabled(arm, sys_arm1176_clk, ARM); +lpsc_clk_enabled(gem, sys_dsp_clk, GEM); +lpsc_clk_enabled(ddr2_phy, sys_ddr_clk, DDR2_PHY); +lpsc_clk_enabled(tpcc, sys_full_clk, TPCC); +lpsc_clk_enabled(tptc0, sys_full_clk, TPTC0); +lpsc_clk_enabled(tptc1, sys_full_clk, TPTC1); +lpsc_clk_enabled(ram, sys_full_clk, RAM); +lpsc_clk_enabled(aemif, sys_full_clk, AEMIF); +lpsc_clk_enabled(chipcfg, sys_half_clk, CHIP_CFG); +lpsc_clk_enabled(rom, sys_half_clk, ROM); +lpsc_clk_enabled(secctl, sys_half_clk, SECCTL); +lpsc_clk_enabled(keymgr, sys_half_clk, KEYMGR); +lpsc_clk_enabled(gpio, sys_half_clk, GPIO); +lpsc_clk_enabled(debugss, sys_half_clk, DEBUGSS); +lpsc_clk_enabled(system, sys_half_clk, SYSTEM); +lpsc_clk_enabled(ddr2_vrst, sys_ddr_clk, DDR2_EMIF1_VRST); +lpsc_clk_enabled(ddr2_vctl_rst, sys_ddr_clk, DDR2_EMIF2_VCTL_RST); +lpsc_clk_enabled(wdt_arm, sys_half_clk, WDT_ARM); + +lpsc_clk(mbx_lite, sys_arm1176_clk, MBX_LITE); +lpsc_clk(ethss, eth_125mhz_clk, ETHSS); +lpsc_clk(tsc, sys_tsc_clk, TSC); +lpsc_clk(uart0, sys_half_clk, UART0); +lpsc_clk(uart1, sys_half_clk, UART1); +lpsc_clk(uart2, sys_half_clk, UART2); +lpsc_clk(pktsec, sys_half_clk, PKTSEC); +lpsc_clk(keypad, sys_half_clk, KEYPAD); +lpsc_clk(mdio, sys_half_clk, MDIO); +lpsc_clk(sdio0, sys_half_clk, SDIO0); +lpsc_clk(sdio1, sys_half_clk, SDIO1); +lpsc_clk(timer0, sys_half_clk, TIMER0); +lpsc_clk(timer1, sys_half_clk, TIMER1); +lpsc_clk(wdt_dsp, sys_half_clk, WDT_DSP); +lpsc_clk(ssp, sys_half_clk, SSP); +lpsc_clk(tdm0, tdm_0_clk, TDM0); +lpsc_clk(tdm1, tdm_1_clk, TDM1); +lpsc_clk(vlynq, sys_vlynq_ref_clk, VLYNQ); +lpsc_clk(mcdma, sys_half_clk, MCDMA); +lpsc_clk(usb0, sys_half_clk, USB0); +lpsc_clk(usb1, sys_half_clk, USB1); +lpsc_clk(usbss, sys_half_clk, USBSS); +lpsc_clk(ethss_rgmii, eth_250mhz_clk, ETHSS_RGMII); +lpsc_clk(imcop, sys_dsp_clk, IMCOP); +lpsc_clk(spare, sys_half_clk, SPARE); + +/* LCD needs a full power down to clear controller state */ +__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE); + + +/* Level 4 - leaf clocks for LPSC modules shared across drivers */ +static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec }; +static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec }; + +static struct clk_lookup clks[] = { + CLK(NULL, "pll_sys_clk", &pll_sys_clk), + CLK(NULL, "pll_eth_clk", &pll_eth_clk), + CLK(NULL, "pll_tdm_clk", &pll_tdm_clk), + CLK(NULL, "sys_arm1176_clk", &sys_arm1176_clk), + CLK(NULL, "sys_dsp_clk", &sys_dsp_clk), + CLK(NULL, "sys_ddr_clk", &sys_ddr_clk), + CLK(NULL, "sys_full_clk", &sys_full_clk), + CLK(NULL, "sys_lcd_clk", &sys_lcd_clk), + CLK(NULL, "sys_vlynq_ref_clk", &sys_vlynq_ref_clk), + CLK(NULL, "sys_tsc_clk", &sys_tsc_clk), + CLK(NULL, "sys_half_clk", &sys_half_clk), + CLK(NULL, "eth_5mhz_clk", ð_5mhz_clk), + CLK(NULL, "eth_50mhz_clk", ð_50mhz_clk), + CLK(NULL, "eth_125mhz_clk", ð_125mhz_clk), + CLK(NULL, "eth_250mhz_clk", ð_250mhz_clk), + CLK(NULL, "eth_25mhz_clk", ð_25mhz_clk), + CLK(NULL, "tdm_0_clk", &tdm_0_clk), + CLK(NULL, "tdm_extra_clk", &tdm_extra_clk), + CLK(NULL, "tdm_1_clk", &tdm_1_clk), + CLK(NULL, "clk_arm", &clk_arm), + CLK(NULL, "clk_gem", &clk_gem), + CLK(NULL, "clk_ddr2_phy", &clk_ddr2_phy), + CLK(NULL, "clk_tpcc", &clk_tpcc), + CLK(NULL, "clk_tptc0", &clk_tptc0), + CLK(NULL, "clk_tptc1", &clk_tptc1), + CLK(NULL, "clk_ram", &clk_ram), + CLK(NULL, "clk_mbx_lite", &clk_mbx_lite), + CLK("tnetv107x-fb.0", NULL, &clk_lcd), + CLK(NULL, "clk_ethss", &clk_ethss), + CLK(NULL, "aemif", &clk_aemif), + CLK(NULL, "clk_chipcfg", &clk_chipcfg), + CLK("tnetv107x-ts.0", NULL, &clk_tsc), + CLK(NULL, "clk_rom", &clk_rom), + CLK(NULL, "uart2", &clk_uart2), + CLK(NULL, "clk_pktsec", &clk_pktsec), + CLK("tnetv107x-rng.0", NULL, &clk_rng), + CLK("tnetv107x-pka.0", NULL, &clk_pka), + CLK(NULL, "clk_secctl", &clk_secctl), + CLK(NULL, "clk_keymgr", &clk_keymgr), + CLK("tnetv107x-keypad.0", NULL, &clk_keypad), + CLK(NULL, "clk_gpio", &clk_gpio), + CLK(NULL, "clk_mdio", &clk_mdio), + CLK("davinci_mmc.0", NULL, &clk_sdio0), + CLK(NULL, "uart0", &clk_uart0), + CLK(NULL, "uart1", &clk_uart1), + CLK(NULL, "timer0", &clk_timer0), + CLK(NULL, "timer1", &clk_timer1), + CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm), + CLK(NULL, "clk_wdt_dsp", &clk_wdt_dsp), + CLK("ti-ssp.0", NULL, &clk_ssp), + CLK(NULL, "clk_tdm0", &clk_tdm0), + CLK(NULL, "clk_vlynq", &clk_vlynq), + CLK(NULL, "clk_mcdma", &clk_mcdma), + CLK(NULL, "clk_usb0", &clk_usb0), + CLK(NULL, "clk_tdm1", &clk_tdm1), + CLK(NULL, "clk_debugss", &clk_debugss), + CLK(NULL, "clk_ethss_rgmii", &clk_ethss_rgmii), + CLK(NULL, "clk_system", &clk_system), + CLK(NULL, "clk_imcop", &clk_imcop), + CLK(NULL, "clk_spare", &clk_spare), + CLK("davinci_mmc.1", NULL, &clk_sdio1), + CLK(NULL, "clk_usb1", &clk_usb1), + CLK(NULL, "clk_usbss", &clk_usbss), + CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst), + CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst), + CLK(NULL, NULL, NULL), +}; + +static const struct mux_config pins[] = { +#ifdef CONFIG_DAVINCI_MUX + MUX_CFG(TNETV107X, ASR_A00, 0, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO32, 0, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A01, 0, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO33, 0, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A02, 0, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO34, 0, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A03, 0, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO35, 0, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A04, 0, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO36, 0, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A05, 0, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO37, 0, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A06, 1, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO38, 1, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A07, 1, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO39, 1, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A08, 1, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO40, 1, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A09, 1, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO41, 1, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A10, 1, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO42, 1, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A11, 1, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_0, 1, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A12, 2, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_1, 2, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A13, 2, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO43, 2, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A14, 2, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO44, 2, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A15, 2, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO45, 2, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A16, 2, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO46, 2, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A17, 2, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO47, 2, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A18, 3, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO48, 3, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA3_0, 3, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A19, 3, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO49, 3, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA2_0, 3, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A20, 3, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO50, 3, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA1_0, 3, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A21, 3, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO51, 3, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA0_0, 3, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A22, 3, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO52, 3, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_CMD_0, 3, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A23, 3, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO53, 3, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_CLK_0, 3, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_BA_1, 4, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO54, 4, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SYS_PLL_CLK, 4, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_CS0, 4, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_CS1, 4, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_CS2, 4, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM_PLL_CLK, 4, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_CS3, 4, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ETH_PHY_CLK, 4, 20, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, ASR_D00, 4, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO55, 4, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D01, 5, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO56, 5, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D02, 5, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO57, 5, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D03, 5, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO58, 5, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D04, 5, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO59_0, 5, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D05, 5, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO60_0, 5, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D06, 5, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO61_0, 5, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D07, 6, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO62_0, 6, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D08, 6, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO63_0, 6, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D09, 6, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO64_0, 6, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D10, 6, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA3_1, 6, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D11, 6, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA2_1, 6, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D12, 6, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA1_1, 6, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D13, 7, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA0_1, 7, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D14, 7, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_CMD_1, 7, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D15, 7, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_CLK_1, 7, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_OE, 7, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_2, 7, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_RNW, 7, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO29_0, 7, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_WAIT, 7, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO30_0, 7, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_WE, 8, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_3, 8, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_WE_DQM0, 8, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO31, 8, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD17_0, 8, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_WE_DQM1, 8, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_BA0_0, 8, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, VLYNQ_CLK, 9, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO14, 9, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD19_0, 9, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_RXD0, 9, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO15, 9, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD20_0, 9, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_RXD1, 9, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO16, 9, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD21_0, 9, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_TXD0, 9, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO17, 9, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD22_0, 9, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_TXD1, 9, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO18, 9, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD23_0, 9, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, SDIO0_CLK, 10, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO19, 10, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_CMD, 10, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO20, 10, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA0, 10, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO21, 10, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA1, 10, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO22, 10, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA2, 10, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO23, 10, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA3, 10, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO24, 10, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, EMU0, 11, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, EMU1, 11, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, RTCK, 12, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TRST_N, 12, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TCK, 12, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDI, 12, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDO, 12, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TMS, 12, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_CLK, 13, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_RX, 13, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_TX, 13, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_FS, 13, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R0, 14, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R1, 14, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R2, 14, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R3, 14, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R4, 14, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R5, 14, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R6, 15, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO12, 15, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, KEYPAD_R7, 15, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO10, 15, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, KEYPAD_C0, 15, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C1, 15, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C2, 15, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C3, 15, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C4, 16, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C5, 16, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C6, 16, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO13, 16, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, TEST_CLK_IN, 16, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, KEYPAD_C7, 16, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO11, 16, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SSP0_0, 17, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_DCLK, 17, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD20_1, 17, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP0_1, 17, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_CS_N, 17, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD21_1, 17, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP0_2, 17, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_D, 17, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD22_1, 17, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP0_3, 17, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_RESETN, 17, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD23_1, 17, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_0, 18, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO25, 18, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_CTS, 18, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_1, 18, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO26, 18, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_RD, 18, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_2, 18, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO27, 18, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_RTS, 18, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_3, 18, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO28, 18, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_TD, 18, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, UART0_CTS, 19, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART0_RD, 19, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART0_RTS, 19, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART0_TD, 19, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART1_RD, 19, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART1_TD, 19, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_AC_NCS, 20, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_HSYNC_RNW, 20, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_VSYNC_A0, 20, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_MCLK, 20, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD16_0, 20, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PCLK_E, 20, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD00, 20, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD01, 21, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD02, 21, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD03, 21, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD04, 21, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD05, 21, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD06, 21, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD07, 22, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD08, 22, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO59_1, 22, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD09, 22, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO60_1, 22, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD10, 22, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_BA0_1, 22, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO61_1, 22, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD11, 22, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO62_1, 22, 20, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD12, 22, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO63_1, 22, 25, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD13, 23, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO64_1, 23, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD14, 23, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO29_1, 23, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD15, 23, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO30_1, 23, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, EINT0, 24, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO08, 24, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, EINT1, 24, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO09, 24, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO00, 24, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD20_2, 24, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, TDM_CLK_IN_2, 24, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO01, 24, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD21_2, 24, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, 24M_CLK_OUT_1, 24, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO02, 24, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD22_2, 24, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO03, 24, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD23_2, 24, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO04, 25, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD16_1, 25, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, USB0_RXERR, 25, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO05, 25, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD17_1, 25, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, TDM_CLK_IN_1, 25, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO06, 25, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD18, 25, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, 24M_CLK_OUT_2, 25, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO07, 25, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD19_1, 25, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, USB1_RXERR, 25, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, ETH_PLL_CLK, 25, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, MDIO, 26, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, MDC, 26, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, AIC_MUTE_STAT_N, 26, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_CLK, 26, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, AIC_HNS_EN_N, 26, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_FS, 26, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N, 26, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_TX, 26, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N, 26, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_RX, 26, 25, 0x1f, 0x04, false) +#endif +}; + +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = { + /* fill in default priority 7 */ + [0 ... (TNETV107X_N_CP_INTC_IRQ - 1)] = 7, + /* now override as needed, e.g. [xxx] = 5 */ +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id ids[] = { + { + .variant = 0x0, + .part_no = 0xb8a1, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_TNETV107X, + .name = "tnetv107x rev 1.0", + }, + { + .variant = 0x1, + .part_no = 0xb8a1, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_TNETV107X, + .name = "tnetv107x rev 1.1/1.2", + }, +}; + +static struct davinci_timer_instance timer_instance[2] = { + { + .base = TNETV107X_TIMER0_BASE, + .bottom_irq = IRQ_TNETV107X_TIMER_0_TINT12, + .top_irq = IRQ_TNETV107X_TIMER_0_TINT34, + }, + { + .base = TNETV107X_TIMER1_BASE, + .bottom_irq = IRQ_TNETV107X_TIMER_1_TINT12, + .top_irq = IRQ_TNETV107X_TIMER_1_TINT34, + }, +}; + +static struct davinci_timer_info timer_info = { + .timers = timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +/* + * TNETV107X platforms do not use the static mappings from Davinci + * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses, + * and changing IO_PHYS would break away from existing Davinci SOCs. + * + * The primary impact of the current model is that IO_ADDRESS() is not to be + * used to map registers on TNETV107X. + * + * 1. The first chunk is for INTC: This needs to be mapped in via iotable + * because ioremap() does not seem to be operational at the time when + * irqs are initialized. Without this, consistent dma init bombs. + * + * 2. The second chunk maps in register areas that need to be populated into + * davinci_soc_info. Note that alignment restrictions come into play if + * low-level debug is enabled (see note in <mach/tnetv107x.h>). + */ +static struct map_desc io_desc[] = { + { /* INTC */ + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(TNETV107X_INTC_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, + { /* Most of the rest */ + .virtual = TNETV107X_IO_VIRT, + .pfn = __phys_to_pfn(TNETV107X_IO_BASE), + .length = IO_SIZE - SZ_1M, + .type = MT_DEVICE + }, +}; + +static unsigned long clk_sspll_recalc(struct clk *clk) +{ + int pll; + unsigned long mult = 0, prediv = 1, postdiv = 1; + unsigned long ref = OSC_FREQ_ONCHIP, ret; + u32 tmp; + + if (WARN_ON(!clk->pll_data)) + return clk->rate; + + if (!clk_ctrl_regs) { + void __iomem *tmp; + + tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K); + + if (WARN(!tmp, "failed ioremap for clock control regs\n")) + return clk->parent ? clk->parent->rate : 0; + + for (pll = 0; pll < N_PLLS; pll++) + sspll_regs[pll] = tmp + sspll_regs_base[pll]; + + clk_ctrl_regs = tmp; + } + + pll = clk->pll_data->num; + + tmp = __raw_readl(&clk_ctrl_regs->pll_bypass); + if (!(tmp & bypass_mask[pll])) { + mult = __raw_readl(&sspll_regs[pll]->mult_factor); + prediv = __raw_readl(&sspll_regs[pll]->pre_div) + 1; + postdiv = __raw_readl(&sspll_regs[pll]->post_div) + 1; + } + + tmp = __raw_readl(clk->pll_data->base + PLLCTL); + if (tmp & PLLCTL_CLKMODE) + ref = pll_ext_freq[pll]; + + clk->pll_data->input_rate = ref; + + tmp = __raw_readl(clk->pll_data->base + PLLCTL); + if (!(tmp & PLLCTL_PLLEN)) + return ref; + + ret = ref; + if (mult) + ret += ((unsigned long long)ref * mult) / 256; + + ret /= (prediv * postdiv); + + return ret; +} + +static void tnetv107x_watchdog_reset(struct platform_device *pdev) +{ + struct wdt_regs __iomem *regs; + + regs = ioremap(pdev->resource[0].start, SZ_4K); + + /* disable watchdog */ + __raw_writel(0x7777, ®s->disable_lock); + __raw_writel(0xcccc, ®s->disable_lock); + __raw_writel(0xdddd, ®s->disable_lock); + __raw_writel(0, ®s->disable); + + /* program prescale */ + __raw_writel(0x5a5a, ®s->prescale_lock); + __raw_writel(0xa5a5, ®s->prescale_lock); + __raw_writel(0, ®s->prescale); + + /* program countdown */ + __raw_writel(0x6666, ®s->change_lock); + __raw_writel(0xbbbb, ®s->change_lock); + __raw_writel(1, ®s->change); + + /* enable watchdog */ + __raw_writel(0x7777, ®s->disable_lock); + __raw_writel(0xcccc, ®s->disable_lock); + __raw_writel(0xdddd, ®s->disable_lock); + __raw_writel(1, ®s->disable); + + /* kick */ + __raw_writel(0x5555, ®s->kick_lock); + __raw_writel(0xaaaa, ®s->kick_lock); + __raw_writel(1, ®s->kick); +} + +static struct davinci_soc_info tnetv107x_soc_info = { + .io_desc = io_desc, + .io_desc_num = ARRAY_SIZE(io_desc), + .ids = ids, + .ids_num = ARRAY_SIZE(ids), + .jtag_id_reg = TNETV107X_CHIP_CFG_BASE + 0x018, + .cpu_clks = clks, + .psc_bases = psc_regs, + .psc_bases_num = ARRAY_SIZE(psc_regs), + .pinmux_base = TNETV107X_CHIP_CFG_BASE + 0x150, + .pinmux_pins = pins, + .pinmux_pins_num = ARRAY_SIZE(pins), + .intc_type = DAVINCI_INTC_TYPE_CP_INTC, + .intc_base = TNETV107X_INTC_BASE, + .intc_irq_prios = irq_prios, + .intc_irq_num = TNETV107X_N_CP_INTC_IRQ, + .intc_host_map = intc_host_map, + .gpio_base = TNETV107X_GPIO_BASE, + .gpio_type = GPIO_TYPE_TNETV107X, + .gpio_num = TNETV107X_N_GPIO, + .timer_info = &timer_info, + .serial_dev = &tnetv107x_serial_device, + .reset = tnetv107x_watchdog_reset, + .reset_device = &tnetv107x_wdt_device, +}; + +void __init tnetv107x_init(void) +{ + davinci_common_init(&tnetv107x_soc_info); +} |