diff options
Diffstat (limited to 'arch/arm/mach-cns3xxx')
| -rw-r--r-- | arch/arm/mach-cns3xxx/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/cns3420vb.c | 54 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/core.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/core.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/devices.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/entry-macro.S | 66 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/include/mach/pm.h | 23 | ||||
| -rw-r--r-- | arch/arm/mach-cns3xxx/pm.c | 23 |
9 files changed, 105 insertions, 75 deletions
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 9ebfcc46feb..29b13f249aa 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -3,6 +3,7 @@ menu "CNS3XXX platform type" config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" + select MIGHT_HAVE_PCI help Include support for the Cavium Networks CNS3420 MPCore Platform Baseboard. diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 90fe9ab8591..08e5c875950 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/compiler.h> #include <linux/io.h> +#include <linux/dma-mapping.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> @@ -108,10 +109,63 @@ static void __init cns3420_early_serial_setup(void) } /* + * USB + */ +static struct resource cns3xxx_usb_ehci_resources[] = { + [0] = { + .start = CNS3XXX_USB_BASE, + .end = CNS3XXX_USB_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CNS3XXX_USB_EHCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device cns3xxx_usb_ehci_device = { + .name = "cns3xxx-ehci", + .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources), + .resource = cns3xxx_usb_ehci_resources, + .dev = { + .dma_mask = &cns3xxx_usb_ehci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource cns3xxx_usb_ohci_resources[] = { + [0] = { + .start = CNS3XXX_USB_OHCI_BASE, + .end = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CNS3XXX_USB_OHCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device cns3xxx_usb_ohci_device = { + .name = "cns3xxx-ohci", + .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources), + .resource = cns3xxx_usb_ohci_resources, + .dev = { + .dma_mask = &cns3xxx_usb_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* * Initialization */ static struct platform_device *cns3420_pdevs[] __initdata = { &cns3420_nor_pdev, + &cns3xxx_usb_ehci_device, + &cns3xxx_usb_ohci_device, }; static void __init cns3420_init(void) diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 9ca4d581016..da30078a80c 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -69,13 +69,10 @@ void __init cns3xxx_map_io(void) } /* used by entry-macro.S */ -void __iomem *gic_cpu_base_addr; - void __init cns3xxx_init_irq(void) { - gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT); - gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), + __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT)); } void cns3xxx_power_off(void) diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index 6b33ec11346..ffeb3a8b73b 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -11,13 +11,10 @@ #ifndef __CNS3XXX_CORE_H #define __CNS3XXX_CORE_H -extern void __iomem *gic_cpu_base_addr; extern struct sys_timer cns3xxx_timer; void __init cns3xxx_map_io(void); void __init cns3xxx_init_irq(void); void cns3xxx_power_off(void); -void cns3xxx_pwr_power_up(unsigned int block); -void cns3xxx_pwr_power_down(unsigned int block); #endif /* __CNS3XXX_CORE_H */ diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c index 50b4d31c27c..79d1fb02c23 100644 --- a/arch/arm/mach-cns3xxx/devices.c +++ b/arch/arm/mach-cns3xxx/devices.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <mach/cns3xxx.h> #include <mach/irqs.h> +#include <mach/pm.h> #include "core.h" #include "devices.h" diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h index 6dbce13771c..191c8e57f28 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -165,7 +165,6 @@ #define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 #define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ -#define CNS3XXX_USB_BASE_VIRT 0xFFF16000 #define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ #define CNS3XXX_SATA2_SIZE SZ_16M @@ -184,7 +183,6 @@ #define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 #define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ -#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000 #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ #define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 5e1c5545680..6bd83ed90af 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -9,74 +9,10 @@ */ #include <mach/hardware.h> -#include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h new file mode 100644 index 00000000000..6eae7f764d1 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/pm.h @@ -0,0 +1,23 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2004 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __CNS3XXX_PM_H +#define __CNS3XXX_PM_H + +#include <asm/atomic.h> + +void cns3xxx_pwr_clk_en(unsigned int block); +void cns3xxx_pwr_clk_dis(unsigned int block); +void cns3xxx_pwr_power_up(unsigned int block); +void cns3xxx_pwr_power_down(unsigned int block); + +extern atomic_t usb_pwr_ref; + +#endif /* __CNS3XXX_PM_H */ diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index 38e44706fea..5e579552aa5 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -6,10 +6,14 @@ * published by the Free Software Foundation. */ +#include <linux/init.h> +#include <linux/module.h> #include <linux/io.h> #include <linux/delay.h> +#include <asm/atomic.h> #include <mach/system.h> #include <mach/cns3xxx.h> +#include <mach/pm.h> void cns3xxx_pwr_clk_en(unsigned int block) { @@ -18,6 +22,16 @@ void cns3xxx_pwr_clk_en(unsigned int block) reg |= (block & PM_CLK_GATE_REG_MASK); __raw_writel(reg, PM_CLK_GATE_REG); } +EXPORT_SYMBOL(cns3xxx_pwr_clk_en); + +void cns3xxx_pwr_clk_dis(unsigned int block) +{ + u32 reg = __raw_readl(PM_CLK_GATE_REG); + + reg &= ~(block & PM_CLK_GATE_REG_MASK); + __raw_writel(reg, PM_CLK_GATE_REG); +} +EXPORT_SYMBOL(cns3xxx_pwr_clk_dis); void cns3xxx_pwr_power_up(unsigned int block) { @@ -29,6 +43,7 @@ void cns3xxx_pwr_power_up(unsigned int block) /* Wait for 300us for the PLL output clock locked. */ udelay(300); }; +EXPORT_SYMBOL(cns3xxx_pwr_power_up); void cns3xxx_pwr_power_down(unsigned int block) { @@ -38,6 +53,7 @@ void cns3xxx_pwr_power_down(unsigned int block) reg |= (block & CNS3XXX_PWR_PLL_ALL); __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG); }; +EXPORT_SYMBOL(cns3xxx_pwr_power_down); static void cns3xxx_pwr_soft_rst_force(unsigned int block) { @@ -51,11 +67,13 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block) reg &= ~(block & PM_SOFT_RST_REG_MASK); } else { reg &= ~(block & PM_SOFT_RST_REG_MASK); + __raw_writel(reg, PM_SOFT_RST_REG); reg |= (block & PM_SOFT_RST_REG_MASK); } __raw_writel(reg, PM_SOFT_RST_REG); } +EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force); void cns3xxx_pwr_soft_rst(unsigned int block) { @@ -69,6 +87,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block) } cns3xxx_pwr_soft_rst_force(block); } +EXPORT_SYMBOL(cns3xxx_pwr_soft_rst); void arch_reset(char mode, const char *cmd) { @@ -99,3 +118,7 @@ int cns3xxx_cpu_clock(void) return cpu; } +EXPORT_SYMBOL(cns3xxx_cpu_clock); + +atomic_t usb_pwr_ref = ATOMIC_INIT(0); +EXPORT_SYMBOL(usb_pwr_ref); |