aboutsummaryrefslogtreecommitdiff
path: root/sound/oss/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/oss/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'sound/oss/Kconfig')
-rw-r--r--sound/oss/Kconfig1120
1 files changed, 1120 insertions, 0 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
new file mode 100644
index 00000000000..d303c2ed6e5
--- /dev/null
+++ b/sound/oss/Kconfig
@@ -0,0 +1,1120 @@
+# drivers/sound/Config.in
+#
+# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
+# More hacking for modularisation.
+#
+# Prompt user for primary drivers.
+config SOUND_BT878
+ tristate "BT878 audio dma"
+ depends on SOUND_PRIME!=n && SOUND
+ ---help---
+ Audio DMA support for bt878 based grabber boards. As you might have
+ already noticed, bt878 is listed with two functions in /proc/pci.
+ Function 0 does the video stuff (bt848 compatible), function 1 does
+ the same for audio data. This is a driver for the audio part of
+ the chip. If you say 'Y' here you get a oss-compatible dsp device
+ where you can record from. If you want just watch TV you probably
+ don't need this driver as most TV cards handle sound with a short
+ cable from the TV card to your sound card's line-in.
+
+ To compile this driver as a module, choose M here: the module will
+ be called btaudio.
+
+config SOUND_CMPCI
+ tristate "C-Media PCI (CMI8338/8738)"
+ depends on SOUND_PRIME!=n && SOUND && PCI
+ help
+ Say Y or M if you have a PCI sound card using the CMI8338
+ or the CMI8738 chipset. Data on these chips are available at
+ <http://www.cmedia.com.tw/>.
+
+ A userspace utility to control some internal registers of these
+ chips is available at
+ <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+config SOUND_CMPCI_FM
+ bool "Enable legacy FM"
+ depends on SOUND_CMPCI && X86
+ help
+ Say Y here to enable the legacy FM (frequency-modulation) synthesizer
+ support on a card using the CMI8338 or CMI8378 chipset. Even it is
+ enabled, you need to set fmio as proper value to enable it.
+ Say N here if you don't need this.
+
+config SOUND_CMPCI_MIDI
+ bool "Enable legacy MPU-401"
+ depends on SOUND_CMPCI && X86
+ help
+ Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
+ card using the CMI8338 or CMI8378 chipset. Even it is enabled,
+ you need to set mpuio as proper value to enable it.
+ Say N here if you don't need this.
+
+config SOUND_CMPCI_JOYSTICK
+ bool "Enable joystick"
+ depends on SOUND_CMPCI && X86
+ help
+ Say Y here in order to enable the joystick port on a sound card using
+ the CMI8338 or the CMI8738 chipset. You need to config the
+ gameport support and set joystick parameter as 1 to use it.
+ Say N here if you don't need this.
+
+config SOUND_EMU10K1
+ tristate "Creative SBLive! (EMU10K1)"
+ depends on SOUND_PRIME!=n && SOUND && PCI
+ ---help---
+ Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
+ such as the Creative SBLive!, SB PCI512 or Emu-APS.
+
+ For more information on this driver and the degree of support for
+ the different card models please check:
+
+ <http://sourceforge.net/projects/emu10k1/>
+
+ It is now possible to load dsp microcode patches into the EMU10K1
+ chip. These patches are used to implement real time sound
+ processing effects which include for example: signal routing,
+ bass/treble control, AC3 passthrough, ...
+ Userspace tools to create new patches and load/unload them can be
+ found in the emu-tools package at the above URL.
+
+config MIDI_EMU10K1
+ bool "Creative SBLive! MIDI (EXPERIMENTAL)"
+ depends on SOUND_EMU10K1 && EXPERIMENTAL
+ help
+ Say Y if you want to be able to use the OSS /dev/sequencer
+ interface. This code is still experimental.
+
+config SOUND_FUSION
+ tristate "Crystal SoundFusion (CS4280/461x)"
+ depends on SOUND_PRIME!=n && SOUND
+ help
+ This module drives the Crystal SoundFusion devices (CS4280/46xx
+ series) when wired as native sound drivers with AC97 codecs. If
+ this driver does not work try the CS4232 driver.
+
+config SOUND_CS4281
+ tristate "Crystal Sound CS4281"
+ depends on SOUND_PRIME!=n && SOUND
+ help
+ Picture and feature list at
+ <http://www.pcbroker.com/crystal4281.html>.
+
+config SOUND_BCM_CS4297A
+ tristate "Crystal Sound CS4297a (for Swarm)"
+ depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND
+ help
+ The BCM91250A has a Crystal CS4297a on synchronous serial
+ port B (in addition to the DB-9 serial port). Say Y or M
+ here to enable the sound chip instead of the UART. Also
+ note that CONFIG_KGDB should not be enabled at the same
+ time, since it also attempts to use this UART port.
+
+config SOUND_ES1370
+ tristate "Ensoniq AudioPCI (ES1370)"
+ depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ help
+ Say Y or M if you have a PCI sound card utilizing the Ensoniq
+ ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
+ out if your sound card uses an ES1370 without removing your
+ computer's cover, use lspci -n and look for the PCI ID
+ 1274:5000. Since Ensoniq was bought by Creative Labs,
+ Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
+ This driver differs slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/es1370>.
+
+config SOUND_ES1371
+ tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
+ depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ help
+ Say Y or M if you have a PCI sound card utilizing the Ensoniq
+ ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
+ your sound card uses an ES1371 without removing your computer's
+ cover, use lspci -n and look for the PCI ID 1274:1371. Since
+ Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
+ models are either ES1370 or ES1371 based. This driver differs
+ slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/es1371>.
+
+config SOUND_ESSSOLO1
+ tristate "ESS Technology Solo1"
+ depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI
+ help
+ Say Y or M if you have a PCI sound card utilizing the ESS Technology
+ Solo1 chip. To find out if your sound card uses a
+ Solo1 chip without removing your computer's cover, use
+ lspci -n and look for the PCI ID 125D:1969. This driver
+ differs slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/solo1>.
+
+config SOUND_MAESTRO
+ tristate "ESS Maestro, Maestro2, Maestro2E driver"
+ depends on SOUND_PRIME!=n && SOUND && PCI
+ help
+ Say Y or M if you have a sound system driven by ESS's Maestro line
+ of PCI sound chips. These include the Maestro 1, Maestro 2, and
+ Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
+ details.
+
+config SOUND_MAESTRO3
+ tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
+ depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
+ help
+ Say Y or M if you have a sound system driven by ESS's Maestro 3
+ PCI sound chip.
+
+config SOUND_ICH
+ tristate "Intel ICH (i8xx) audio support"
+ depends on SOUND_PRIME!=n && PCI
+ help
+ Support for integral audio in Intel's I/O Controller Hub (ICH)
+ chipset, as used on the 810/820/840 motherboards.
+
+config SOUND_HARMONY
+ tristate "PA Harmony audio driver"
+ depends on GSC_LASI && SOUND_PRIME!=n
+ help
+ Say 'Y' or 'M' to include support for Harmony soundchip
+ on HP 712, 715/new and many other GSC based machines.
+
+config SOUND_SONICVIBES
+ tristate "S3 SonicVibes"
+ depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ help
+ Say Y or M if you have a PCI sound card utilizing the S3
+ SonicVibes chipset. To find out if your sound card uses a
+ SonicVibes chip without removing your computer's cover, use
+ lspci -n and look for the PCI ID 5333:CA00. This driver
+ differs slightly from OSS/Free, so PLEASE READ
+ <file:Documentation/sound/oss/sonicvibes>.
+
+config SOUND_VWSND
+ tristate "SGI Visual Workstation Sound"
+ depends on SOUND_PRIME!=n && X86_VISWS && SOUND
+ help
+ Say Y or M if you have an SGI Visual Workstation and you want to be
+ able to use its on-board audio. Read
+ <file:Documentation/sound/oss/vwsnd> for more info on this driver's
+ capabilities.
+
+config SOUND_HAL2
+ tristate "SGI HAL2 sound (EXPERIMENTAL)"
+ depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
+ help
+ Say Y or M if you have an SGI Indy system and want to be able to
+ use it's on-board A2 audio system.
+
+config SOUND_IT8172
+ tristate "IT8172G Sound"
+ depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND
+
+config SOUND_VRC5477
+ tristate "NEC Vrc5477 AC97 sound"
+ depends on SOUND_PRIME!=n && DDB5477 && SOUND
+ help
+ Say Y here to enable sound support for the NEC Vrc5477 chip, an
+ integrated, multi-function controller chip for MIPS CPUs. Works
+ with the AC97 codec.
+
+config SOUND_AU1000
+ tristate "Au1000 Sound"
+ depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
+
+config SOUND_AU1550_AC97
+ tristate "Au1550 AC97 Sound"
+ depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND
+
+config SOUND_TRIDENT
+ tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
+ depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ ---help---
+ Say Y or M if you have a PCI sound card utilizing the Trident
+ 4DWave-DX/NX chipset or your mother board chipset has SiS 7018
+ or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
+ in SiS960 Super South Bridge and SiS540/630 Single Chipset.
+ The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
+ M1535+ or M1535D+ South Bridge.
+
+ Use lspci -n to find out if your sound card or chipset uses
+ Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
+ for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
+ 10B9:5451 stands for ALi5451.
+
+ This driver supports S/PDIF in/out (record/playback) for ALi 5451
+ embedded in ALi M1535+ and M1535D+. Note that they aren't all
+ enabled by default; you can enable them by saying Y to "/proc file
+ system support" and "Sysctl support", and after the /proc file
+ system has been mounted, executing the command
+
+ command what is enabled
+
+ echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
+
+ echo 1>/proc/ALi5451 use S/PDIF out to output pcm data.
+
+ echo 2>/proc/ALi5451 use S/PDIF out to output non-pcm data.
+ (AC3...).
+
+ echo 3>/proc/ALi5451 record from Ac97 in(MIC, Line in...).
+ (Default).
+
+ echo 4>/proc/ALi5451 no matter Ac97 settings, record from S/PDIF
+ in.
+
+
+ This driver differs slightly from OSS/Free, so PLEASE READ the
+ comments at the top of <file:drivers/sound/trident.c>.
+
+config SOUND_MSNDCLAS
+ tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
+ depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ help
+ Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
+ Monterey (not for the Pinnacle or Fiji).
+
+ See <file:Documentation/sound/oss/MultiSound> for important information
+ about this driver. Note that it has been discontinued, but the
+ Voyetra Turtle Beach knowledge base entry for it is still available
+ at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
+
+comment "Compiled-in MSND Classic support requires firmware during compilation."
+ depends on SOUND_PRIME && SOUND_MSNDCLAS=y
+
+config MSNDCLAS_HAVE_BOOT
+ bool
+ depends on SOUND_MSNDCLAS=y && !STANDALONE
+ default y
+
+config MSNDCLAS_INIT_FILE
+ string "Full pathname of MSNDINIT.BIN firmware file"
+ depends on SOUND_MSNDCLAS
+ default "/etc/sound/msndinit.bin"
+ help
+ The MultiSound cards have two firmware files which are required for
+ operation, and are not currently included. These files can be
+ obtained from Turtle Beach. See
+ <file:Documentation/sound/oss/MultiSound> for information on how to
+ obtain this.
+
+config MSNDCLAS_PERM_FILE
+ string "Full pathname of MSNDPERM.BIN firmware file"
+ depends on SOUND_MSNDCLAS
+ default "/etc/sound/msndperm.bin"
+ help
+ The MultiSound cards have two firmware files which are required for
+ operation, and are not currently included. These files can be
+ obtained from Turtle Beach. See
+ <file:Documentation/sound/oss/MultiSound> for information on how to
+ obtain this.
+
+config MSNDCLAS_IRQ
+ int "MSND Classic IRQ 5, 7, 9, 10, 11, 12"
+ depends on SOUND_MSNDCLAS=y
+ default "5"
+ help
+ Interrupt Request line for the MultiSound Classic and related cards.
+
+config MSNDCLAS_MEM
+ hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000"
+ depends on SOUND_MSNDCLAS=y
+ default "D0000"
+ help
+ Memory-mapped I/O base address for the MultiSound Classic and
+ related cards.
+
+config MSNDCLAS_IO
+ hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
+ depends on SOUND_MSNDCLAS=y
+ default "290"
+ help
+ I/O port address for the MultiSound Classic and related cards.
+
+config SOUND_MSNDPIN
+ tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
+ depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ help
+ Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
+ See <file:Documentation/sound/oss/MultiSound> for important information
+ about this driver. Note that it has been discontinued, but the
+ Voyetra Turtle Beach knowledge base entry for it is still available
+ at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
+
+comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
+ depends on SOUND_PRIME && SOUND_MSNDPIN=y
+
+config MSNDPIN_HAVE_BOOT
+ bool
+ depends on SOUND_MSNDPIN=y
+ default y
+
+config MSNDPIN_INIT_FILE
+ string "Full pathname of PNDSPINI.BIN firmware file"
+ depends on SOUND_MSNDPIN
+ default "/etc/sound/pndspini.bin"
+ help
+ The MultiSound cards have two firmware files which are required
+ for operation, and are not currently included. These files can be
+ obtained from Turtle Beach. See
+ <file:Documentation/sound/oss/MultiSound> for information on how to
+ obtain this.
+
+config MSNDPIN_PERM_FILE
+ string "Full pathname of PNDSPERM.BIN firmware file"
+ depends on SOUND_MSNDPIN
+ default "/etc/sound/pndsperm.bin"
+ help
+ The MultiSound cards have two firmware files which are required for
+ operation, and are not currently included. These files can be
+ obtained from Turtle Beach. See
+ <file:Documentation/sound/oss/MultiSound> for information on how to
+ obtain this.
+
+config MSNDPIN_IRQ
+ int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12"
+ depends on SOUND_MSNDPIN=y
+ default "5"
+ help
+ Interrupt request line for the primary synthesizer on MultiSound
+ Pinnacle and Fiji sound cards.
+
+config MSNDPIN_MEM
+ hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000"
+ depends on SOUND_MSNDPIN=y
+ default "D0000"
+ help
+ Memory-mapped I/O base address for the primary synthesizer on
+ MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IO
+ hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
+ depends on SOUND_MSNDPIN=y
+ default "290"
+ help
+ Memory-mapped I/O base address for the primary synthesizer on
+ MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_DIGITAL
+ bool "MSND Pinnacle has S/PDIF I/O"
+ depends on SOUND_MSNDPIN=y
+ help
+ If you have the S/PDIF daughter board for the Pinnacle or Fiji,
+ answer Y here; otherwise, say N. If you have this, you will be able
+ to play and record from the S/PDIF port (digital signal). See
+ <file:Documentation/sound/oss/MultiSound> for information on how to make
+ use of this capability.
+
+config MSNDPIN_NONPNP
+ bool "MSND Pinnacle non-PnP Mode"
+ depends on SOUND_MSNDPIN=y
+ help
+ The Pinnacle and Fiji card resources can be configured either with
+ PnP, or through a configuration port. Say Y here if your card is NOT
+ in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
+ use of the IDE and joystick peripherals on the card as well; these
+ do not show up when the card is in PnP mode. Specifying zero for any
+ resource of a device will disable the device. If you are running the
+ card in PnP mode, you must say N here and use isapnptools to
+ configure the card's resources.
+
+comment "MSND Pinnacle DSP section will be configured to above parameters."
+ depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
+
+config MSNDPIN_CFG
+ hex "MSND Pinnacle config port 250,260,270"
+ depends on MSNDPIN_NONPNP
+ default "250"
+ help
+ This is the port which the Pinnacle and Fiji uses to configure the
+ card's resources when not in PnP mode. If your card is in PnP mode,
+ then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
+ Mode".
+
+comment "Pinnacle-specific Device Configuration (0 disables)"
+ depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
+
+config MSNDPIN_MPU_IO
+ hex "MSND Pinnacle MPU I/O (e.g. 330)"
+ depends on MSNDPIN_NONPNP
+ default "0"
+ help
+ Memory-mapped I/O base address for the Kurzweil daughterboard
+ synthesizer on MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_MPU_IRQ
+ int "MSND Pinnacle MPU IRQ (e.g. 9)"
+ depends on MSNDPIN_NONPNP
+ default "0"
+ help
+ Interrupt request number for the Kurzweil daughterboard
+ synthesizer on MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IDE_IO0
+ hex "MSND Pinnacle IDE I/O 0 (e.g. 170)"
+ depends on MSNDPIN_NONPNP
+ default "0"
+ help
+ CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
+ Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IDE_IO1
+ hex "MSND Pinnacle IDE I/O 1 (e.g. 376)"
+ depends on MSNDPIN_NONPNP
+ default "0"
+ help
+ CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
+ Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IDE_IRQ
+ int "MSND Pinnacle IDE IRQ (e.g. 15)"
+ depends on MSNDPIN_NONPNP
+ default "0"
+ help
+ Interrupt request number for the IDE CD-ROM interface on the
+ MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_JOYSTICK_IO
+ hex "MSND Pinnacle joystick I/O (e.g. 200)"
+ depends on MSNDPIN_NONPNP
+ default "0"
+ help
+ Memory-mapped I/O base address for the joystick port on MultiSound
+ Pinnacle and Fiji sound cards.
+
+config MSND_FIFOSIZE
+ int "MSND buffer size (kB)"
+ depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y)
+ default "128"
+ help
+ Configures the size of each audio buffer, in kilobytes, for
+ recording and playing in the MultiSound drivers (both the Classic
+ and Pinnacle). Larger values reduce the chance of data overruns at
+ the expense of overall latency. If unsure, use the default.
+
+config SOUND_VIA82CXXX
+ tristate "VIA 82C686 Audio Codec"
+ depends on SOUND_PRIME!=n && PCI
+ help
+ Say Y here to include support for the audio codec found on VIA
+ 82Cxxx-based chips. Typically these are built into a motherboard.
+
+ DO NOT select Sound Blaster or Adlib with this driver, unless
+ you have a Sound Blaster or Adlib card in addition to your VIA
+ audio chip.
+
+config MIDI_VIA82CXXX
+ bool "VIA 82C686 MIDI"
+ depends on SOUND_VIA82CXXX
+ help
+ Answer Y to use the MIDI interface of the Via686. You may need to
+ enable this in the BIOS before it will work. This is for connection
+ to external MIDI hardware, and is not required for software playback
+ of MIDI files.
+
+config SOUND_OSS
+ tristate "OSS sound modules"
+ depends on SOUND_PRIME!=n && SOUND
+ help
+ OSS is the Open Sound System suite of sound card drivers. They make
+ sound programming easier since they provide a common API. Say Y or
+ M here (the module will be called sound) if you haven't found a
+ driver for your sound card above, then pick your driver from the
+ list below.
+
+config SOUND_TRACEINIT
+ bool "Verbose initialisation"
+ depends on SOUND_OSS
+ help
+ Verbose soundcard initialization -- affects the format of autoprobe
+ and initialization messages at boot time.
+
+config SOUND_DMAP
+ bool "Persistent DMA buffers"
+ depends on SOUND_OSS
+ ---help---
+ Linux can often have problems allocating DMA buffers for ISA sound
+ cards on machines with more than 16MB of RAM. This is because ISA
+ DMA buffers must exist below the 16MB boundary and it is quite
+ possible that a large enough free block in this region cannot be
+ found after the machine has been running for a while. If you say Y
+ here the DMA buffers (64Kb) will be allocated at boot time and kept
+ until the shutdown. This option is only useful if you said Y to
+ "OSS sound modules", above. If you said M to "OSS sound modules"
+ then you can get the persistent DMA buffer functionality by passing
+ the command-line argument "dmabuf=1" to the sound module.
+
+ Say Y unless you have 16MB or more RAM or a PCI sound card.
+
+config SOUND_AD1816
+ tristate "AD1816(A) based cards (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && SOUND_OSS
+ help
+ Say M here if you have a sound card based on the Analog Devices
+ AD1816(A) chip.
+
+ If you compile the driver into the kernel, you have to add
+ "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+config SOUND_AD1889
+ tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && SOUND_OSS
+ help
+ Say M here if you have a sound card based on the Analog Devices
+ AD1889 chip.
+
+config SOUND_SGALAXY
+ tristate "Aztech Sound Galaxy (non-PnP) cards"
+ depends on SOUND_OSS
+ help
+ This module initializes the older non Plug and Play sound galaxy
+ cards from Aztech. It supports the Waverider Pro 32 - 3D and the
+ Galaxy Washington 16.
+
+ If you compile the driver into the kernel, you have to add
+ "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
+ line.
+
+config SOUND_ADLIB
+ tristate "Adlib Cards"
+ depends on SOUND_OSS
+ help
+ Includes ASB 64 4D. Information on programming AdLib cards is
+ available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
+
+config SOUND_ACI_MIXER
+ tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
+ depends on SOUND_OSS
+ ---help---
+ ACI (Audio Command Interface) is a protocol used to communicate with
+ the microcontroller on some sound cards produced by miro and
+ Cardinal Technologies. The main function of the ACI is to control
+ the mixer and to get a product identification.
+
+ This VoxWare ACI driver currently supports the ACI functions on the
+ miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
+ also controls the radio tuner. This is supported in the video4linux
+ miropcm20 driver (say M or Y here and go back to "Multimedia
+ devices" -> "Radio Adapters").
+
+ This driver is also available as a module and will be called aci.
+
+config SOUND_CS4232
+ tristate "Crystal CS4232 based (PnP) cards"
+ depends on SOUND_OSS
+ help
+ Say Y here if you have a card based on the Crystal CS4232 chip set,
+ which uses its own Plug and Play protocol.
+
+ If you compile the driver into the kernel, you have to add
+ "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+ command line.
+
+ See <file:Documentation/sound/oss/CS4232> for more information on
+ configuring this card.
+
+config SOUND_SSCAPE
+ tristate "Ensoniq SoundScape support"
+ depends on SOUND_OSS
+ help
+ Answer Y if you have a sound card based on the Ensoniq SoundScape
+ chipset. Such cards are being manufactured at least by Ensoniq, Spea
+ and Reveal (Reveal makes also other cards).
+
+ If you compile the driver into the kernel, you have to add
+ "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
+ line.
+
+config SOUND_GUS
+ tristate "Gravis Ultrasound support"
+ depends on SOUND_OSS
+ help
+ Say Y here for any type of Gravis Ultrasound card, including the GUS
+ or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
+ information on configuring this card with modules.
+
+ If you compile the driver into the kernel, you have to add
+ "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+config SOUND_GUS16
+ bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
+ depends on SOUND_GUS
+ help
+ Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
+ sampling at 16-bit width.
+
+config SOUND_GUSMAX
+ bool "GUS MAX support"
+ depends on SOUND_GUS
+ help
+ Support for Gravis Ulstrasound MAX.
+
+config SOUND_VMIDI
+ tristate "Loopback MIDI device support"
+ depends on SOUND_OSS
+ help
+ Support for MIDI loopback on port 1 or 2.
+
+config SOUND_TRIX
+ tristate "MediaTrix AudioTrix Pro support"
+ depends on SOUND_OSS
+ help
+ Answer Y if you have the AudioTriX Pro sound card manufactured
+ by MediaTrix.
+
+config TRIX_HAVE_BOOT
+ bool "Have TRXPRO.HEX firmware file"
+ depends on SOUND_TRIX=y && !STANDALONE
+ help
+ The MediaTrix AudioTrix Pro has an on-board microcontroller which
+ needs to be initialized by downloading the code from the file
+ TRXPRO.HEX in the DOS driver directory. If you don't have the
+ TRXPRO.HEX file handy you may skip this step. However, the SB and
+ MPU-401 modes of AudioTrix Pro will not work without this file!
+
+config TRIX_BOOT_FILE
+ string "Full pathname of TRXPRO.HEX firmware file"
+ depends on TRIX_HAVE_BOOT
+ default "/etc/sound/trxpro.hex"
+ help
+ Enter the full pathname of your TRXPRO.HEX file, starting from /.
+
+config SOUND_MSS
+ tristate "Microsoft Sound System support"
+ depends on SOUND_OSS
+ ---help---
+ Again think carefully before answering Y to this question. It's
+ safe to answer Y if you have the original Windows Sound System card
+ made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may
+ say Y in case your card is NOT among these:
+
+ ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
+ Ensoniq SoundScape (and compatibles made by Reveal and Spea),
+ Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
+ Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
+ Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
+ 82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
+ Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
+ SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
+ Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
+ Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
+ Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
+ notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
+ synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
+
+ For cards having native support in VoxWare, consult the card
+ specific instructions in <file:Documentation/sound/oss/README.OSS>.
+ Some drivers have their own MSS support and saying Y to this option
+ will cause a conflict.
+
+ If you compile the driver into the kernel, you have to add
+ "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
+ line.
+
+config SOUND_MPU401
+ tristate "MPU-401 support (NOT for SB16)"
+ depends on SOUND_OSS
+ ---help---
+ Be careful with this question. The MPU401 interface is supported by
+ all sound cards. However, some natively supported cards have their
+ own driver for MPU401. Enabling this MPU401 option with these cards
+ will cause a conflict. Also, enabling MPU401 on a system that
+ doesn't really have a MPU401 could cause some trouble. If your card
+ was in the list of supported cards, look at the card specific
+ instructions in the <file:Documentation/sound/oss/README.OSS> file. It
+ is safe to answer Y if you have a true MPU401 MIDI interface card.
+
+ If you compile the driver into the kernel, you have to add
+ "mpu401=<io>,<irq>" to the kernel command line.
+
+config SOUND_NM256
+ tristate "NM256AV/NM256ZX audio support"
+ depends on SOUND_OSS
+ help
+ Say M here to include audio support for the NeoMagic 256AV/256ZX
+ chipsets. These are the audio chipsets found in the Sony
+ Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
+ laptops. It includes support for an AC97-compatible mixer and an
+ apparently proprietary sound engine.
+
+ See <file:Documentation/sound/oss/NM256> for further information.
+
+config SOUND_MAD16
+ tristate "OPTi MAD16 and/or Mozart based cards"
+ depends on SOUND_OSS && SOUND_GAMEPORT
+ ---help---
+ Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
+ 82C928 or 82C929 or 82C931) audio interface chip. These chips are
+ quite common so it's possible that many no-name cards have one of
+ them. In addition the MAD16 chip is used in some cards made by known
+ manufacturers such as Turtle Beach (Tropez), Reveal (some models)
+ and Diamond (latest ones). Note however that the Tropez sound cards
+ have their own driver; if you have one of those, say N here and Y or
+ M to "Full support for Turtle Beach WaveFront", below.
+
+ If you compile the driver into the kernel, you have to add
+ "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
+ kernel command line.
+
+ See also <file:Documentation/sound/oss/Opti> and
+ <file:Documentation/sound/oss/MAD16> for more information on setting
+ these cards up as modules.
+
+config MAD16_OLDCARD
+ bool "Support MIDI in older MAD16 based cards (requires SB)"
+ depends on SOUND_MAD16
+ help
+ Answer Y (or M) if you have an older card based on the C928 or
+ Mozart chipset and you want to have MIDI support. If you enable this
+ option you also need to enable support for Sound Blaster.
+
+config SOUND_PAS
+ tristate "ProAudioSpectrum 16 support"
+ depends on SOUND_OSS
+ ---help---
+ Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
+ 16 or Logitech SoundMan 16 sound card. Answer N if you have some
+ other card made by Media Vision or Logitech since those are not
+ PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>.
+ It is not necessary to add Sound Blaster support separately; it
+ is included in PAS support.
+
+ If you compile the driver into the kernel, you have to add
+ "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
+ to the kernel command line.
+
+config PAS_JOYSTICK
+ bool "Enable PAS16 joystick port"
+ depends on SOUND_PAS=y
+ help
+ Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
+ port.
+
+config SOUND_PSS
+ tristate "PSS (AD1848, ADSP-2115, ESC614) support"
+ depends on SOUND_OSS
+ help
+ Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
+ ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
+ ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
+ how to compile it into the kernel or as a module see the file
+ <file:Documentation/sound/oss/PSS>.
+
+ If you compile the driver into the kernel, you have to add
+ "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
+ command line.
+
+config PSS_MIXER
+ bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
+ depends on SOUND_PSS
+ help
+ Answer Y for Beethoven ADSP-16. You may try to say Y also for other
+ cards if they have master volume, bass, treble, and you can't
+ control it under Linux. If you answer N for Beethoven ADSP-16, you
+ can't control master volume, bass, treble and synth volume.
+
+ If you said M to "PSS support" above, you may enable or disable this
+ PSS mixer with the module parameter pss_mixer. For more information
+ see the file <file:Documentation/sound/oss/PSS>.
+
+config PSS_HAVE_BOOT
+ bool "Have DSPxxx.LD firmware file"
+ depends on SOUND_PSS && !STANDALONE
+ help
+ If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
+ to include this file. Without this file the synth device (OPL) may
+ not work.
+
+config PSS_BOOT_FILE
+ string "Full pathname of DSPxxx.LD firmware file"
+ depends on PSS_HAVE_BOOT
+ default "/etc/sound/dsp001.ld"
+ help
+ Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
+ starting from /.
+
+config SOUND_SB
+ tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
+ depends on SOUND_OSS
+ ---help---
+ Answer Y if you have an original Sound Blaster card made by Creative
+ Labs or a 100% hardware compatible clone (like the Thunderboard or
+ SM Games). For an unknown card you may answer Y if the card claims
+ to be Sound Blaster-compatible.
+
+ Please read the file <file:Documentation/sound/oss/Soundblaster>.
+
+ You should also say Y here for cards based on the Avance Logic
+ ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
+ for cards based on ESS chips (read
+ <file:Documentation/sound/oss/ESS1868> and
+ <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
+ 64, say Y here and also to "AWE32 synth" below and read
+ <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
+ card, say Y here and read <file:Documentation/sound/oss/mwave>.
+
+ If you compile the driver into the kernel and don't want to use
+ isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
+ command line.
+
+ You can say M here to compile this driver as a module; the module is
+ called sb.
+
+config SOUND_AWE32_SYNTH
+ tristate "AWE32 synth"
+ depends on SOUND_OSS
+ help
+ Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
+ similar sound card. See <file:Documentation/sound/oss/README.awe>,
+ <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+ for more info.
+
+config SOUND_WAVEFRONT
+ tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
+ depends on SOUND_OSS && m
+ help
+ Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
+ and read the files <file:Documentation/sound/oss/Wavefront> and
+ <file:Documentation/sound/oss/Tropez+>.
+
+config SOUND_MAUI
+ tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
+ depends on SOUND_OSS
+ help
+ Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
+ sound card.
+
+ If you compile the driver into the kernel, you have to add
+ "maui=<io>,<irq>" to the kernel command line.
+
+config MAUI_HAVE_BOOT
+ bool "Have OSWF.MOT firmware file"
+ depends on SOUND_MAUI=y && !STANDALONE
+ help
+ Turtle Beach Maui and Tropez sound cards have a microcontroller
+ which needs to be initialized prior to use. OSWF.MOT is a file
+ distributed with the card's DOS/Windows drivers. Answer Y if you
+ have this file.
+
+config MAUI_BOOT_FILE
+ string "Full pathname of OSWF.MOT firmware file"
+ depends on MAUI_HAVE_BOOT
+ default "/etc/sound/oswf.mot"
+ help
+ Enter the full pathname of your OSWF.MOT file, starting from /.
+
+config SOUND_YM3812
+ tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
+ depends on SOUND_OSS
+ ---help---
+ Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
+ Answering Y is usually a safe and recommended choice, however some
+ cards may have software (TSR) FM emulation. Enabling FM support with
+ these cards may cause trouble (I don't currently know of any such
+ cards, however). Please read the file
+ <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip.
+
+ If you compile the driver into the kernel, you have to add
+ "opl3=<io>" to the kernel command line.
+
+ If unsure, say Y.
+
+config SOUND_OPL3SA1
+ tristate "Yamaha OPL3-SA1 audio controller"
+ depends on SOUND_OSS
+ help
+ Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
+ usually built into motherboards. Read
+ <file:Documentation/sound/oss/OPL3-SA> for details.
+
+ If you compile the driver into the kernel, you have to add
+ "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+ command line.
+
+config SOUND_OPL3SA2
+ tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
+ depends on SOUND_OSS
+ help
+ Say Y or M if you have a card based on one of these Yamaha sound
+ chipsets or the "SAx", which is actually a SA3. Read
+ <file:Documentation/sound/oss/OPL3-SA2> for more information on
+ configuring these cards.
+
+ If you compile the driver into the kernel and do not also
+ configure in the optional ISA PnP support, you will have to add
+ "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
+ command line.
+
+config SOUND_YMFPCI
+ tristate "Yamaha YMF7xx PCI audio (native mode)"
+ depends on SOUND_OSS && PCI
+ help
+ Support for Yamaha cards including the YMF711, YMF715, YMF718,
+ YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
+
+config SOUND_YMFPCI_LEGACY
+ bool "Yamaha PCI legacy ports support"
+ depends on SOUND_YMFPCI
+ help
+ Support for YMF7xx PCI cards emulating an MP401.
+
+config SOUND_UART6850
+ tristate "6850 UART support"
+ depends on SOUND_OSS
+ help
+ This option enables support for MIDI interfaces based on the 6850
+ UART chip. This interface is rarely found on sound cards. It's safe
+ to answer N to this question.
+
+ If you compile the driver into the kernel, you have to add
+ "uart6850=<io>,<irq>" to the kernel command line.
+
+config SOUND_AEDSP16
+ tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
+ depends on SOUND_OSS
+ ---help---
+ Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
+ driver supports Audio Excel DSP 16 but not the III nor PnP versions
+ of this card.
+
+ The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
+ a Microsoft Sound System card, so you should have said Y to either
+ "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
+ or "Microsoft Sound System support", above, and you need to answer
+ the "MSS emulation" and "SBPro emulation" questions below
+ accordingly. You should say Y to one and only one of these two
+ questions.
+
+ Read the <file:Documentation/sound/oss/README.OSS> file and the head of
+ <file:drivers/sound/aedsp16.c> as well as
+ <file:Documentation/sound/oss/AudioExcelDSP16> to get more information
+ about this driver and its configuration.
+
+config SC6600
+ bool "SC-6600 based audio cards (new Audio Excel DSP 16)"
+ depends on SOUND_AEDSP16
+ help
+ The SC6600 is the new version of DSP mounted on the Audio Excel DSP
+ 16 cards. Find in the manual the FCC ID of your audio card and
+ answer Y if you have an SC6600 DSP.
+
+config SC6600_JOY
+ bool "Activate SC-6600 Joystick Interface"
+ depends on SC6600
+ help
+ Say Y here in order to use the joystick interface of the Audio Excel
+ DSP 16 card.
+
+config SC6600_CDROM
+ int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
+ depends on SC6600
+ default "4"
+ help
+ This is used to activate the CD-ROM interface of the Audio Excel
+ DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
+ CD-ROM present.
+
+config SC6600_CDROMBASE
+ hex "SC-6600 CDROM Interface I/O Address"
+ depends on SC6600
+ default "0"
+ help
+ Base I/O port address for the CD-ROM interface of the Audio Excel
+ DSP 16 card.
+
+choice
+ prompt "Audio Excel DSP 16"
+ optional
+ depends on SOUND_AEDSP16
+
+config AEDSP16_MSS
+ bool "MSS emulation"
+ depends on SOUND_MSS
+ help
+ Answer Y if you want your audio card to emulate Microsoft Sound
+ System. You should then say Y to "Microsoft Sound System support"
+ and say N to "Audio Excel DSP 16 (SBPro emulation)".
+
+config AEDSP16_SBPRO
+ bool "SBPro emulation"
+ depends on SOUND_SB
+ help
+ Answer Y if you want your audio card to emulate Sound Blaster Pro.
+ You should then say Y to "100% Sound Blaster compatibles
+ (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
+ emulation)".
+
+ If you compile the driver into the kernel, you have to add
+ "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
+ command line.
+
+endchoice
+
+config AEDSP16_MPU401
+ bool "Audio Excel DSP 16 (MPU401 emulation)"
+ depends on SOUND_AEDSP16 && SOUND_MPU401
+ help
+ Answer Y if you want your audio card to emulate the MPU-401 midi
+ interface. You should then also say Y to "MPU-401 support".
+
+ Note that the I/O base for MPU-401 support of aedsp16 is the same
+ you have selected for "MPU-401 support". If you are using this
+ driver as a module you have to specify the MPU I/O base address with
+ the parameter 'mpu_base=0xNNN'.
+
+config SOUND_VIDC
+ tristate "VIDC 16-bit sound"
+ depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
+ help
+ 16-bit support for the VIDC onboard sound hardware found on Acorn
+ machines.
+
+config SOUND_WAVEARTIST
+ tristate "Netwinder WaveArtist"
+ depends on ARM && SOUND_OSS && ARCH_NETWINDER
+ help
+ Say Y here to include support for the Rockwell WaveArtist sound
+ system. This driver is mainly for the NetWinder.
+
+config SOUND_TVMIXER
+ tristate "TV card (bt848) mixer support"
+ depends on SOUND_PRIME!=n && SOUND && I2C
+ help
+ Support for audio mixer facilities on the BT848 TV frame-grabber
+ card.
+
+config SOUND_KAHLUA
+ tristate "XpressAudio Sound Blaster emulation"
+ depends on SOUND_SB
+
+config SOUND_ALI5455
+ tristate "ALi5455 audio support"
+ depends on SOUND_PRIME!=n && PCI
+
+config SOUND_FORTE
+ tristate "ForteMedia FM801 driver"
+ depends on SOUND_PRIME!=n && PCI
+ help
+ Say Y or M if you want driver support for the ForteMedia FM801 PCI
+ audio controller (Abit AU10, Genius Sound Maker, HP Workstation
+ zx2000, and others).
+
+config SOUND_RME96XX
+ tristate "RME Hammerfall (RME96XX) support"
+ depends on SOUND_PRIME!=n && PCI
+ help
+ Say Y or M if you have a Hammerfall or Hammerfall light
+ multichannel card from RME. If you want to access advanced
+ features of the card, read <file:Documentation/sound/oss/rme96xx>.
+
+config SOUND_AD1980
+ tristate "AD1980 front/back switch plugin"
+ depends on SOUND_PRIME!=n
+
+config SOUND_SH_DAC_AUDIO
+ tristate "SuperH DAC audio support"
+ depends on SOUND_PRIME!=n && SOUND && CPU_SH3
+
+config SOUND_SH_DAC_AUDIO_CHANNEL
+ int " DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO