aboutsummaryrefslogtreecommitdiff
path: root/drivers/atm
diff options
context:
space:
mode:
authorDavid Woodhouse <David.Woodhouse@intel.com>2009-01-27 14:16:12 +1100
committerDavid Woodhouse <David.Woodhouse@intel.com>2009-01-27 14:19:26 +1100
commitfa755b9f2b03df1e0fa6d01b8949bbc778705973 (patch)
tree703a48b707c2f4350e624bac0891e128da9c7f77 /drivers/atm
parent7c4015bdffed7c961b6df46c6326cc65962e6594 (diff)
solos: Clean up firmware loading code
We no longer try to load firmware while the ATM is up and running. However, this means that we _do_ make init_module() wait for it, and it takes a long time for now (since we're using ultra-conservative code in the FPGA for that too). The inner loop which uses swahb32p() was by Simon Farnsworth. Simon has patches which migrate us to request_firmware_nowait(), for which we'll actually need to take down the ATM devices, do the upgrade, then reregister them. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/atm')
-rw-r--r--drivers/atm/solos-pci.c209
1 files changed, 73 insertions, 136 deletions
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 2b472c898c8..89bdf733af9 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -93,7 +93,7 @@ struct solos_card {
spinlock_t cli_queue_lock;
struct sk_buff_head tx_queue[4];
struct sk_buff_head cli_queue[4];
- int flash_chip;
+ wait_queue_head_t fw_wq;
};
#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
@@ -112,11 +112,7 @@ module_param(firmware_upgrade, int, 0444);
module_param(fpga_upgrade, int, 0444);
static int opens;
-static struct firmware *fw;
-static int flash_offset;
-void flash_upgrade(struct solos_card *);
-void flash_write(struct solos_card *);
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
struct atm_vcc *vcc);
static int fpga_tx(struct solos_card *);
@@ -202,129 +198,73 @@ static ssize_t console_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(console, 0644, console_show, console_store);
-void flash_upgrade(struct solos_card *card){
+static int flash_upgrade(struct solos_card *card, int chip)
+{
+ const struct firmware *fw;
+ const char *fw_name;
uint32_t data32 = 0;
int blocksize = 0;
int numblocks = 0;
- dev_info(&card->dev->dev, "Flash upgrade started\n");
- if (card->flash_chip == 0) {
- if (request_firmware((const struct firmware **)&fw,
- "solos-FPGA.bin",&card->dev->dev))
- {
- dev_info(&card->dev->dev,
- "Failed to find firmware\n");
- return;
- }
+ int offset;
+
+ if (chip == 0) {
+ fw_name = "solos-FPGA.bin";
blocksize = FPGA_BLOCK;
} else {
- if (request_firmware((const struct firmware **)&fw,
- "solos-Firmware.bin",&card->dev->dev))
- {
- dev_info(&card->dev->dev,
- "Failed to find firmware\n");
- return;
- }
+ fw_name = "solos-Firmware.bin";
blocksize = SOLOS_BLOCK;
}
- numblocks = fw->size/blocksize;
- dev_info(&card->dev->dev, "Firmware size: %d\n", fw->size);
+
+ if (request_firmware(&fw, fw_name, &card->dev->dev))
+ return -ENOENT;
+
+ dev_info(&card->dev->dev, "Flash upgrade starting\n");
+
+ numblocks = fw->size / blocksize;
+ dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
-
dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
iowrite32(1, card->config_regs + FPGA_MODE);
data32 = ioread32(card->config_regs + FPGA_MODE);
- /*Set mode to Chip Erase*/
- if (card->flash_chip == 0) {
- dev_info(&card->dev->dev,
- "Set FPGA Flash mode to FPGA Chip Erase\n");
- } else {
- dev_info(&card->dev->dev,
- "Set FPGA Flash mode to Solos Chip Erase\n");
- }
- iowrite32((card->flash_chip * 2), card->config_regs + FLASH_MODE);
- flash_offset = 0;
- iowrite32(1, card->config_regs + WRITE_FLASH);
- return;
-}
-void flash_write(struct solos_card *card){
- int block;
- int block_num;
- int blocksize;
- int i;
- uint32_t data32 = 0;
+ /* Set mode to Chip Erase */
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to %s Chip Erase\n",
+ chip?"Solos":"FPGA");
+ iowrite32((chip * 2), card->config_regs + FLASH_MODE);
- /*Clear write flag*/
- iowrite32(0, card->config_regs + WRITE_FLASH);
- /*Set mode to Block Write*/
- /*dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n");*/
- iowrite32(((card->flash_chip * 2) + 1), card->config_regs + FLASH_MODE);
- /*When finished programming flash, release firmware and exit*/
- if (fw->size - flash_offset == 0) {
- //release_firmware(fw); /* This crashes for some reason */
+ iowrite32(1, card->config_regs + WRITE_FLASH);
+ wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
+
+ for (offset = 0; offset < fw->size; offset += blocksize) {
+ int i;
+
+ /* Clear write flag */
iowrite32(0, card->config_regs + WRITE_FLASH);
- iowrite32(0, card->config_regs + FPGA_MODE);
- iowrite32(0, card->config_regs + FLASH_MODE);
- dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
- return;
- }
- if (card->flash_chip == 0) {
- blocksize = FPGA_BLOCK;
- } else {
- blocksize = SOLOS_BLOCK;
- }
-
- /*Calculate block size*/
- if ((fw->size - flash_offset) > blocksize) {
- block = blocksize;
- } else {
- block = fw->size - flash_offset;
- }
- block_num = flash_offset / blocksize;
- //dev_info(&card->dev->dev, "block %d/%d\n",block_num + 1,(fw->size/512/8));
-
- /*Copy block into RAM*/
- for(i=0;i<block;i++){
- if(i%4 == 0){
- //dev_info(&card->dev->dev, "i: %d\n", i);
- data32=0x00000000;
- }
-
- switch(i%4){
- case 0:
- data32 |= 0x0000FF00 &
- (*(fw->data + i + flash_offset) << 8);
- break;
- case 1:
- data32 |= 0x000000FF & *(fw->data + i + flash_offset);
- break;
- case 2:
- data32 |= 0xFF000000 &
- (*(fw->data + i + flash_offset) << 24);
- break;
- case 3:
- data32 |= 0x00FF0000 &
- (*(fw->data + i + flash_offset) << 16);
- break;
- }
- if (i%4 == 3) {
- iowrite32(data32, RX_BUF(card, 3) + i - 3);
+ /* Set mode to Block Write */
+ /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
+ iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
+
+ /* Copy block to buffer, swapping each 16 bits */
+ for(i = 0; i < blocksize; i += 4) {
+ uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+ iowrite32(word, RX_BUF(card, 3) + i);
}
- }
- i--;
- if (i%4 != 3) {
- iowrite32(data32, RX_BUF(card, 3) + i - (i%4));
+
+ /* Specify block number and then trigger flash write */
+ iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
+ iowrite32(1, card->config_regs + WRITE_FLASH);
+ wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
}
- /*Specify block number and then trigger flash write*/
- iowrite32(block_num, card->config_regs + FLASH_BLOCK);
- iowrite32(1, card->config_regs + WRITE_FLASH);
-// iowrite32(0, card->config_regs + WRITE_FLASH);
- flash_offset += block;
- return;
+ release_firmware(fw);
+ iowrite32(0, card->config_regs + WRITE_FLASH);
+ iowrite32(0, card->config_regs + FPGA_MODE);
+ iowrite32(0, card->config_regs + FLASH_MODE);
+ dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
+ return 0;
}
static irqreturn_t solos_irq(int irq, void *dev_id)
@@ -337,10 +277,10 @@ static irqreturn_t solos_irq(int irq, void *dev_id)
//Disable IRQs from FPGA
iowrite32(0, card->config_regs + IRQ_EN_ADDR);
- /* If we only do it when the device is open, we lose console
- messages */
- if (1 || opens)
+ if (card->atmdev[0])
tasklet_schedule(&card->tlet);
+ else
+ wake_up(&card->fw_wq);
//Enable IRQs from FPGA
iowrite32(1, card->config_regs + IRQ_EN_ADDR);
@@ -354,17 +294,6 @@ void solos_bh(unsigned long card_arg)
uint32_t card_flags;
uint32_t tx_mask;
uint32_t rx_done = 0;
- uint32_t data32;
-
- data32 = ioread32(card->config_regs + FPGA_MODE);
- if (data32 != 0) {
- data32 = ioread32(card->config_regs + FLASH_BUSY);
- if (data32 == 0) {
- flash_write(card);
- }
- return;
- }
-
card_flags = ioread32(card->config_regs + FLAGS_ADDR);
@@ -749,6 +678,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENOMEM;
card->dev = dev;
+ init_waitqueue_head(&card->fw_wq);
err = pci_enable_device(dev);
if (err) {
@@ -794,15 +724,13 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
card->nr_ports = 2; /* FIXME: Detect daughterboard */
- err = atm_init(card);
- if (err)
- goto out_unmap_both;
-
pci_set_drvdata(dev, card);
+
tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
spin_lock_init(&card->tx_lock);
spin_lock_init(&card->tx_queue_lock);
spin_lock_init(&card->cli_queue_lock);
+
/*
// Set Loopback mode
data32 = 0x00010000;
@@ -832,24 +760,33 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
//dev_dbg(&card->dev->dev, "Requesting IRQ: %d\n",dev->irq);
err = request_irq(dev->irq, solos_irq, IRQF_DISABLED|IRQF_SHARED,
"solos-pci", card);
- if (err)
+ if (err) {
dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
+ goto out_unmap_both;
+ }
// Enable IRQs
iowrite32(1, card->config_regs + IRQ_EN_ADDR);
- if(firmware_upgrade != 0){
- card->flash_chip = 1;
- flash_upgrade(card);
- } else {
- if(fpga_upgrade != 0){
- card->flash_chip = 0;
- flash_upgrade(card);
- }
- }
+ if (fpga_upgrade)
+ flash_upgrade(card, 0);
+
+ if (firmware_upgrade)
+ flash_upgrade(card, 1);
+
+ err = atm_init(card);
+ if (err)
+ goto out_free_irq;
+
return 0;
+ out_free_irq:
+ iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+ free_irq(dev->irq, card);
+ tasklet_kill(&card->tlet);
+
out_unmap_both:
+ pci_set_drvdata(dev, NULL);
pci_iounmap(dev, card->config_regs);
out_unmap_config:
pci_iounmap(dev, card->buffers);