aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-08-08 10:08:26 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-08-08 10:08:26 -0700
commit53bcef60633086ad73683d01a4ef9ca678484d2d (patch)
tree8b14cc031124d0aa0da6cd3b60115bc7eaa80061 /arch
parent4fd6c6bf83cb16321e9902b00e2af79054f4e0d6 (diff)
parent85d9865721c62a551547984e6cc8bd3ba732e294 (diff)
Merge branch 'for-linus' of git://www.jni.nu/cris
* 'for-linus' of git://www.jni.nu/cris: (51 commits) CRIS: Fix alignment problem for older ld CRIS: Always dump registers for segfaulting process. CRIS: Add config for pausing a seg-faulting process CRIS: Don't take faults while in_atomic CRIS: Fixup lookup for delay slot faults CRIS: Discard exit.text and .data at runtime CRIS: Add cache aligned and read mostly data sections CRIS: Return something from profile write CRIS: Add ARTPEC-3 and timestamps for sync-serial CRIS: Better ARTPEC-3 support for gpio CRIS: Add include guard CRIS: Better handling of pinmux settings CRIS: New DMA defines for ARTPEC-3 CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil CRIS: Pagetable for ARTPEC-3 CRIS: Machine dependent memmap.h CRIS: Check if pointer is set before using it CRIS: Machine dependent dma.h CRIS: Define __read_mostly for CRISv32 CRIS: Discard .note.gnu.build-id section ...
Diffstat (limited to 'arch')
-rw-r--r--arch/cris/Kconfig5
-rw-r--r--arch/cris/Kconfig.debug6
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig2
-rw-r--r--arch/cris/arch-v10/drivers/eeprom.c2
-rw-r--r--arch/cris/arch-v10/drivers/gpio.c82
-rw-r--r--arch/cris/arch-v10/drivers/i2c.c39
-rw-r--r--arch/cris/arch-v10/drivers/i2c.h3
-rw-r--r--arch/cris/arch-v10/drivers/sync_serial.c30
-rw-r--r--arch/cris/arch-v10/kernel/fasttimer.c6
-rw-r--r--arch/cris/arch-v10/kernel/head.S2
-rw-r--r--arch/cris/arch-v10/kernel/time.c54
-rw-r--r--arch/cris/arch-v32/drivers/cryptocop.c28
-rw-r--r--arch/cris/arch-v32/drivers/i2c.c12
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/gpio.c28
-rw-r--r--arch/cris/arch-v32/drivers/mach-fs/gpio.c42
-rw-r--r--arch/cris/arch-v32/drivers/sync_serial.c30
-rw-r--r--arch/cris/arch-v32/kernel/cacheflush.S5
-rw-r--r--arch/cris/arch-v32/kernel/entry.S80
-rw-r--r--arch/cris/arch-v32/kernel/head.S44
-rw-r--r--arch/cris/arch-v32/kernel/irq.c47
-rw-r--r--arch/cris/arch-v32/kernel/kgdb.c16
-rw-r--r--arch/cris/arch-v32/kernel/kgdb_asm.S2
-rw-r--r--arch/cris/arch-v32/kernel/pinmux.c229
-rw-r--r--arch/cris/arch-v32/kernel/setup.c74
-rw-r--r--arch/cris/arch-v32/kernel/signal.c2
-rw-r--r--arch/cris/arch-v32/kernel/time.c85
-rw-r--r--arch/cris/arch-v32/kernel/traps.c6
-rw-r--r--arch/cris/arch-v32/lib/checksum.S3
-rw-r--r--arch/cris/arch-v32/lib/checksumcopy.S3
-rw-r--r--arch/cris/arch-v32/lib/spinlock.S7
-rw-r--r--arch/cris/arch-v32/mach-a3/Kconfig4
-rw-r--r--arch/cris/arch-v32/mach-a3/dram_init.S16
-rw-r--r--arch/cris/arch-v32/mach-a3/hw_settings.S2
-rw-r--r--arch/cris/arch-v32/mm/init.c23
-rw-r--r--arch/cris/arch-v32/mm/mmu.S4
-rw-r--r--arch/cris/boot/Makefile2
-rw-r--r--arch/cris/boot/compressed/misc.c65
-rw-r--r--arch/cris/include/arch-v32/arch/cache.h2
-rw-r--r--arch/cris/include/arch-v32/arch/dma.h80
-rw-r--r--arch/cris/include/arch-v32/arch/io.h20
-rw-r--r--arch/cris/include/arch-v32/arch/memmap.h25
-rw-r--r--arch/cris/include/arch-v32/arch/pgtable.h8
-rw-r--r--arch/cris/include/arch-v32/arch/uaccess.h7
-rw-r--r--arch/cris/include/arch-v32/mach-a3/mach/dma.h27
-rw-r--r--arch/cris/include/arch-v32/mach-a3/mach/startup.inc28
-rw-r--r--arch/cris/include/arch-v32/mach-fs/mach/dma.h79
-rw-r--r--arch/cris/include/arch-v32/mach-fs/mach/memmap.h24
-rw-r--r--arch/cris/include/arch-v32/mach-fs/mach/startup.inc5
-rw-r--r--arch/cris/include/asm/etraxgpio.h96
-rw-r--r--arch/cris/include/asm/sync_serial.h27
-rw-r--r--arch/cris/kernel/profile.c15
-rw-r--r--arch/cris/kernel/time.c7
-rw-r--r--arch/cris/kernel/vmlinux.lds.S14
-rw-r--r--arch/cris/mm/fault.c45
54 files changed, 857 insertions, 742 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 887ef855be2..aefe3b18a07 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -24,7 +24,7 @@ config GENERIC_CMOS_UPDATE
def_bool y
config ARCH_USES_GETTIMEOFFSET
- def_bool y
+ def_bool n
config GENERIC_IOMAP
bool
@@ -128,16 +128,19 @@ choice
config ETRAX100LX
bool "ETRAX-100LX-v1"
+ select ARCH_USES_GETTIMEOFFSET
help
Support version 1 of the ETRAX 100LX.
config ETRAX100LX_V2
bool "ETRAX-100LX-v2"
+ select ARCH_USES_GETTIMEOFFSET
help
Support version 2 of the ETRAX 100LX.
config SVINTO_SIM
bool "ETRAX-100LX-for-xsim-simulator"
+ select ARCH_USES_GETTIMEOFFSET
help
Support the xsim ETRAX Simulator.
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
index 0a1d62a2361..0b9a630dc81 100644
--- a/arch/cris/Kconfig.debug
+++ b/arch/cris/Kconfig.debug
@@ -32,4 +32,10 @@ config DEBUG_NMI_OOPS
If the system locks up without any debug information you can say Y
here to make it possible to dump an OOPS with an external NMI.
+config NO_SEGFAULT_TERMINATION
+ bool "Keep segfaulting processes"
+ help
+ Place segfaulting user mode processes on a wait queue instead of
+ delivering a terminating SIGSEGV to allow debugging with gdb.
+
endmenu
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 58f5864a668..0d722177992 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -383,7 +383,7 @@ config ETRAX_RS485
depends on ETRAX_SERIAL
help
Enables support for RS-485 serial communication. For a primer on
- RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+ RS-485, see <http://en.wikipedia.org/wiki/Rs485>
config ETRAX_RS485_ON_PA
bool "RS-485 mode on PA"
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index c3405507a3d..5047a33043b 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <asm/uaccess.h>
#include "i2c.h"
@@ -376,7 +375,6 @@ int __init eeprom_init(void)
/* Opens the device. */
static int eeprom_open(struct inode * inode, struct file * file)
{
- cycle_kernel_lock();
if(iminor(inode) != EEPROM_MINOR_NR)
return -ENXIO;
if(imajor(inode) != EEPROM_MAJOR_NR)
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index 4b0f65fac8e..a07b6d25b0c 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/poll.h>
#include <linux/init.h>
@@ -46,8 +45,7 @@ static char gpio_name[] = "etrax gpio";
static wait_queue_head_t *gpio_wq;
#endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char __user *buf,
size_t count, loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp);
@@ -324,7 +322,6 @@ gpio_open(struct inode *inode, struct file *filp)
if (!priv)
return -ENOMEM;
- lock_kernel();
priv->minor = p;
/* initialize the io/alarm struct */
@@ -359,7 +356,6 @@ gpio_open(struct inode *inode, struct file *filp)
alarmlist = priv;
spin_unlock_irqrestore(&gpio_lock, flags);
- unlock_kernel();
return 0;
}
@@ -504,9 +500,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
static int
gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
-static int
-gpio_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
unsigned long val;
@@ -516,54 +510,65 @@ gpio_ioctl(struct inode *inode, struct file *file,
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
return -EINVAL;
- spin_lock_irqsave(&gpio_lock, flags);
-
switch (_IOC_NR(cmd)) {
case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
// read the port
+ spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) {
ret = *priv->port;
} else if (priv->minor == GPIO_MINOR_G) {
ret = (*R_PORT_G_DATA) & 0x7FFFFFFF;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
break;
case IO_SETBITS:
// set changeable bits with a 1 in arg
+ spin_lock_irqsave(&gpio_lock, flags);
+
if (USE_PORTS(priv)) {
- *priv->port = *priv->shadow |=
+ *priv->port = *priv->shadow |=
((unsigned char)arg & priv->changeable_bits);
} else if (priv->minor == GPIO_MINOR_G) {
*R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
break;
case IO_CLRBITS:
// clear changeable bits with a 1 in arg
+ spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) {
- *priv->port = *priv->shadow &=
+ *priv->port = *priv->shadow &=
~((unsigned char)arg & priv->changeable_bits);
} else if (priv->minor == GPIO_MINOR_G) {
*R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
// set alarm when bits with 1 in arg go high
+ spin_lock_irqsave(&gpio_lock, flags);
priv->highalarm |= arg;
gpio_some_alarms = 1;
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_LOWALARM:
// set alarm when bits with 1 in arg go low
+ spin_lock_irqsave(&gpio_lock, flags);
priv->lowalarm |= arg;
gpio_some_alarms = 1;
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRALARM:
- // clear alarm for bits with 1 in arg
+ /* clear alarm for bits with 1 in arg */
+ spin_lock_irqsave(&gpio_lock, flags);
priv->highalarm &= ~arg;
priv->lowalarm &= ~arg;
{
/* Must update gpio_some_alarms */
struct gpio_private *p = alarmlist;
int some_alarms;
- spin_lock_irq(&gpio_lock);
p = alarmlist;
some_alarms = 0;
while (p) {
@@ -574,11 +579,12 @@ gpio_ioctl(struct inode *inode, struct file *file,
p = p->next;
}
gpio_some_alarms = some_alarms;
- spin_unlock_irq(&gpio_lock);
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
/* Read direction 0=input 1=output */
+ spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) {
ret = *priv->dir_shadow;
} else if (priv->minor == GPIO_MINOR_G) {
@@ -587,30 +593,40 @@ gpio_ioctl(struct inode *inode, struct file *file,
*/
ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
*/
+ spin_lock_irqsave(&gpio_lock, flags);
ret = setget_input(priv, arg) & 0x7FFFFFFF;
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
- /* Set direction 0=unchanged 1=output,
- * return mask with 1=output
+ /* Set direction 0=unchanged 1=output,
+ * return mask with 1=output
*/
+ spin_lock_irqsave(&gpio_lock, flags);
ret = setget_output(priv, arg) & 0x7FFFFFFF;
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_SHUTDOWN:
+ spin_lock_irqsave(&gpio_lock, flags);
SOFT_SHUTDOWN();
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_GET_PWR_BT:
+ spin_lock_irqsave(&gpio_lock, flags);
#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
#else
ret = 0;
#endif
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CFG_WRITE_MODE:
+ spin_lock_irqsave(&gpio_lock, flags);
priv->clk_mask = arg & 0xFF;
priv->data_mask = (arg >> 8) & 0xFF;
priv->write_msb = (arg >> 16) & 0x01;
@@ -626,28 +642,33 @@ gpio_ioctl(struct inode *inode, struct file *file,
priv->data_mask = 0;
ret = -EPERM;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
- case IO_READ_INBITS:
+ case IO_READ_INBITS:
/* *arg is result of reading the input pins */
+ spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) {
val = *priv->port;
} else if (priv->minor == GPIO_MINOR_G) {
val = *R_PORT_G_DATA;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT;
break;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
+ spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) {
val = *priv->shadow;
} else if (priv->minor == GPIO_MINOR_G) {
val = port_g_data_shadow;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT;
break;
- case IO_SETGET_INPUT:
+ case IO_SETGET_INPUT:
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
@@ -656,7 +677,9 @@ gpio_ioctl(struct inode *inode, struct file *file,
ret = -EFAULT;
break;
}
+ spin_lock_irqsave(&gpio_lock, flags);
val = setget_input(priv, val);
+ spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT;
break;
@@ -668,18 +691,21 @@ gpio_ioctl(struct inode *inode, struct file *file,
ret = -EFAULT;
break;
}
+ spin_lock_irqsave(&gpio_lock, flags);
val = setget_output(priv, val);
+ spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT;
break;
default:
+ spin_lock_irqsave(&gpio_lock, flags);
if (priv->minor == GPIO_MINOR_LEDS)
ret = gpio_leds_ioctl(cmd, arg);
else
ret = -EINVAL;
+ spin_unlock_irqrestore(&gpio_lock, flags);
} /* switch */
- spin_unlock_irqrestore(&gpio_lock, flags);
return ret;
}
@@ -713,12 +739,12 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
}
static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .unlocked_ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
};
static void ioif_watcher(const unsigned int gpio_in_available,
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index a8737a8eb22..77a94181381 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
@@ -60,8 +59,8 @@ static const char i2c_name[] = "i2c";
#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
-#define i2c_enable()
-#define i2c_disable()
+#define i2c_enable()
+#define i2c_disable()
/* enable or disable output-enable, to select output or input on the i2c bus */
@@ -91,7 +90,7 @@ static const char i2c_name[] = "i2c";
#define i2c_dir_out() \
*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
- REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
+ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
#define i2c_dir_in() \
*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
@@ -189,7 +188,7 @@ i2c_outbyte(unsigned char x)
} else {
i2c_data(I2C_DATA_LOW);
}
-
+
i2c_delay(CLOCK_LOW_TIME/2);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
@@ -416,7 +415,7 @@ i2c_sendnack(void)
*#
*#--------------------------------------------------------------------------*/
int
-i2c_writereg(unsigned char theSlave, unsigned char theReg,
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
unsigned char theValue)
{
int error, cntr = 3;
@@ -468,7 +467,7 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
* enable interrupt again
*/
local_irq_restore(flags);
-
+
} while(error && cntr--);
i2c_delay(CLOCK_LOW_TIME);
@@ -504,7 +503,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
* generate start condition
*/
i2c_start();
-
+
/*
* send slave address
*/
@@ -555,7 +554,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
* enable interrupt again
*/
local_irq_restore(flags);
-
+
} while(error && cntr--);
spin_unlock(&i2c_lock);
@@ -566,7 +565,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
static int
i2c_open(struct inode *inode, struct file *filp)
{
- cycle_kernel_lock();
return 0;
}
@@ -579,9 +577,7 @@ i2c_release(struct inode *inode, struct file *filp)
/* Main device API. ioctl's to write or read to/from i2c registers.
*/
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -EINVAL;
@@ -590,7 +586,7 @@ i2c_ioctl(struct inode *inode, struct file *file,
switch (_IOC_NR(cmd)) {
case I2C_WRITEREG:
/* write to an i2c slave */
- D(printk("i2cw %d %d %d\n",
+ D(printk(KERN_DEBUG "i2cw %d %d %d\n",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
@@ -602,26 +598,25 @@ i2c_ioctl(struct inode *inode, struct file *file,
{
unsigned char val;
/* read from an i2c slave */
- D(printk("i2cr %d %d ",
+ D(printk(KERN_DEBUG "i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
- D(printk("= %d\n", val));
+ D(printk(KERN_DEBUG "= %d\n", val));
return val;
- }
+ }
default:
return -EINVAL;
}
-
return 0;
}
static const struct file_operations i2c_fops = {
- .owner = THIS_MODULE,
- .ioctl = i2c_ioctl,
- .open = i2c_open,
- .release = i2c_release,
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = i2c_ioctl,
+ .open = i2c_open,
+ .release = i2c_release,
};
int __init
diff --git a/arch/cris/arch-v10/drivers/i2c.h b/arch/cris/arch-v10/drivers/i2c.h
index 4ee91426bd4..e36c9627647 100644
--- a/arch/cris/arch-v10/drivers/i2c.h
+++ b/arch/cris/arch-v10/drivers/i2c.h
@@ -1,5 +1,4 @@
-/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */
-
+/* i2c.h */
int i2c_init(void);
/* High level I2C actions */
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 109dcd826d1..ee2dd4323da 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -157,7 +157,7 @@ static int sync_serial_open(struct inode *inode, struct file *file);
static int sync_serial_release(struct inode *inode, struct file *file);
static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl(struct file *file,
unsigned int cmd, unsigned long arg);
static ssize_t sync_serial_write(struct file *file, const char *buf,
size_t count, loff_t *ppos);
@@ -244,13 +244,13 @@ static unsigned sync_serial_prescale_shadow;
#define NUMBER_OF_PORTS 2
static const struct file_operations sync_serial_fops = {
- .owner = THIS_MODULE,
- .write = sync_serial_write,
- .read = sync_serial_read,
- .poll = sync_serial_poll,
- .ioctl = sync_serial_ioctl,
- .open = sync_serial_open,
- .release = sync_serial_release
+ .owner = THIS_MODULE,
+ .write = sync_serial_write,
+ .read = sync_serial_read,
+ .poll = sync_serial_poll,
+ .unlocked_ioctl = sync_serial_ioctl,
+ .open = sync_serial_open,
+ .release = sync_serial_release
};
static int __init etrax_sync_serial_init(void)
@@ -678,7 +678,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
return mask;
}
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl_unlocked(struct file *file,
unsigned int cmd, unsigned long arg)
{
int return_val = 0;
@@ -956,6 +956,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
return return_val;
}
+static long sync_serial_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ long ret;
+
+ lock_kernel();
+ ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
static ssize_t sync_serial_write(struct file *file, const char *buf,
size_t count, loff_t *ppos)
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 5ff08a8695e..8a8196ee8ce 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -467,11 +467,7 @@ timer1_handler(int irq, void *dev_id)
static void wake_up_func(unsigned long data)
{
-#ifdef DECLARE_WAITQUEUE
- wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data;
-#else
- struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
-#endif
+ wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data;
wake_up(sleep_wait_p);
}
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
index fc457710293..a1f2014b4e3 100644
--- a/arch/cris/arch-v10/kernel/head.S
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -280,7 +280,7 @@ _no_romfs_in_flash:
;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does
;; not need this mechanism anyway)
- move.d __vmlinux_end, $r0; the image will be after the vmlinux end address
+ move.d __init_end, $r0; the image will be after the end of init
move.d [$r0], $r1 ; cramfs assumes same endian on host/target
cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock
bne 2f
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 30adae594ae..00eb36f8deb 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -61,66 +61,16 @@ unsigned long get_ns_in_jiffie(void)
unsigned long do_slow_gettimeoffset(void)
{
- unsigned long count, t1;
- unsigned long usec_count = 0;
- unsigned short presc_count;
-
- static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
- static unsigned long jiffies_p = 0;
-
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
+ unsigned long count;
/* The timer interrupt comes from Etrax timer 0. In order to get
* better precision, we check the current value. It might have
* underflowed already though.
*/
-
-#ifndef CONFIG_SVINTO_SIM
- /* Not available in the xsim simulator. */
count = *R_TIMER0_DATA;
- presc_count = *R_TIM_PRESC_STATUS;
- /* presc_count might be wrapped */
- t1 = *R_TIMER0_DATA;
- if (count != t1){
- /* it wrapped, read prescaler again... */
- presc_count = *R_TIM_PRESC_STATUS;
- count = t1;
- }
-#else
- count = 0;
- presc_count = 0;
-#endif
-
- jiffies_t = jiffies;
- /*
- * avoiding timer inconsistencies (they are rare, but they happen)...
- * there are one problem that must be avoided here:
- * 1. the timer counter underflows
- */
- if( jiffies_t == jiffies_p ) {
- if( count > count_p ) {
- /* Timer wrapped, use new count and prescale
- * increase the time corresponding to one jiffie
- */
- usec_count = 1000000/HZ;
- }
- } else
- jiffies_p = jiffies_t;
- count_p = count;
- if (presc_count >= PRESCALE_VALUE/2 ){
- presc_count = PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
- } else {
- presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
- }
/* Convert timer value to usec */
- usec_count += ( (TIMER0_DIV - count) * (1000000/HZ)/TIMER0_DIV ) +
- (( (presc_count) * (1000000000/PRESCALE_FREQ))/1000);
-
- return usec_count;
+ return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
}
/* Excerpt from the Etrax100 HSDD about the built-in watchdog:
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index b70fb34939d..b07646a3050 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -11,7 +11,6 @@
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
@@ -217,7 +216,7 @@ static int cryptocop_open(struct inode *, struct file *);
static int cryptocop_release(struct inode *, struct file *);
-static int cryptocop_ioctl(struct inode *inode, struct file *file,
+static long cryptocop_ioctl(struct file *file,
unsigned int cmd, unsigned long arg);
static void cryptocop_start_job(void);
@@ -279,10 +278,10 @@ static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op);
const struct file_operations cryptocop_fops = {
- .owner = THIS_MODULE,
- .open = cryptocop_open,
- .release = cryptocop_release,
- .ioctl = cryptocop_ioctl
+ .owner = THIS_MODULE,
+ .open = cryptocop_open,
+ .release = cryptocop_release,
+ .unlocked_ioctl = cryptocop_ioctl
};
@@ -2307,7 +2306,6 @@ static int cryptocop_open(struct inode *inode, struct file *filp)
{
int p = iminor(inode);
- cycle_kernel_lock();
if (p != CRYPTOCOP_MINOR) return -EINVAL;
filp->private_data = NULL;
@@ -3102,7 +3100,8 @@ static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp
return 0;
}
-static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+static long cryptocop_ioctl_unlocked(struct inode *inode,
+ struct file *filp, unsigned int cmd, unsigned long arg)
{
int err = 0;
if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) {
@@ -3134,6 +3133,19 @@ static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int
return 0;
}
+static long
+cryptocop_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ long ret;
+
+ lock_kernel();
+ ret = cryptocop_ioctl_unlocked(inode, filp, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
#ifdef LDEBUG
static void print_dma_descriptors(struct cryptocop_int_operation *iop)
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 2fd6a740d89..5a3e900c9a7 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -32,7 +32,7 @@
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <asm/etraxi2c.h>
@@ -47,6 +47,7 @@
#define D(x)
#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
+static DEFINE_MUTEX(i2c_mutex);
static const char i2c_name[] = "i2c";
#define CLOCK_LOW_TIME 8
@@ -636,7 +637,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
static int
i2c_open(struct inode *inode, struct file *filp)
{
- cycle_kernel_lock();
return 0;
}
@@ -665,11 +665,11 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
- lock_kernel();
+ mutex_lock(&i2c_mutex);
ret = i2c_writereg(I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg));
- unlock_kernel();
+ mutex_unlock(&i2c_mutex);
return ret;
case I2C_READREG:
@@ -679,9 +679,9 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
D(printk("i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
- lock_kernel();
+ mutex_lock(&i2c_mutex);
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
- unlock_kernel();
+ mutex_unlock(&i2c_mutex);
D(printk("= %d\n", val));
return val;
}
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 97357cfd17b..2dcd27adbad 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -72,8 +72,7 @@ static char gpio_name[] = "etrax gpio";
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
#endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char __user *buf,
size_t count, loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp);
@@ -521,7 +520,7 @@ static inline unsigned long setget_output(struct gpio_private *priv,
return dir_shadow;
} /* setget_output */
-static int gpio_ioctl(struct inode *inode, struct file *file,
+static long gpio_ioctl_unlocked(struct file *file,
unsigned int cmd, unsigned long arg)
{
unsigned long flags;
@@ -664,6 +663,17 @@ static int gpio_ioctl(struct inode *inode, struct file *file,
return 0;
}
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ long ret;
+
+ lock_kernel();
+ ret = gpio_ioctl_unlocked(file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
@@ -877,12 +887,12 @@ static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
}
static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .unlocked_ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
};
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index d89ab80498e..5ec8a7d4e7d 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -74,8 +74,7 @@ static wait_queue_head_t *gpio_wq;
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
#endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp);
@@ -185,7 +184,7 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = {
static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
{
unsigned int mask = 0;
- struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ struct gpio_private *priv = file->private_data;
unsigned long data;
poll_wait(file, &priv->alarm_wq, wait);
if (priv->minor == GPIO_MINOR_A) {
@@ -353,7 +352,7 @@ gpio_pa_interrupt(int irq, void *dev_id)
static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
loff_t *off)
{
- struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ struct gpio_private *priv = file->private_data;
unsigned char data, clk_mask, data_mask, write_msb;
unsigned long flags;
unsigned long shadow;
@@ -468,7 +467,7 @@ gpio_release(struct inode *inode, struct file *filp)
spin_lock_irq(&alarm_lock);
p = alarmlist;
- todel = (struct gpio_private *)filp->private_data;
+ todel = filp->private_data;
if (p == todel) {
alarmlist = todel->next;
@@ -557,17 +556,15 @@ inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
return dir_shadow;
} /* setget_output */
-static int
-gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
static int
-gpio_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
unsigned long val;
unsigned long shadow;
- struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ struct gpio_private *priv = file->private_data;
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
return -EINVAL;
@@ -707,6 +704,17 @@ gpio_ioctl(struct inode *inode, struct file *file,
return 0;
}
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ long ret;
+
+ lock_kernel();
+ ret = gpio_ioctl_unlocked(file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int
virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -714,7 +722,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
unsigned long flags;
unsigned short val;
unsigned short shadow;
- struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ struct gpio_private *priv = file->private_data;
switch (_IOC_NR(cmd)) {
case IO_SETBITS:
@@ -856,12 +864,12 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
}
static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .unlocked_ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
};
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index 4889f196ecd..ca248f3adb8 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -153,7 +153,7 @@ static int sync_serial_open(struct inode *, struct file*);
static int sync_serial_release(struct inode*, struct file*);
static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
-static int sync_serial_ioctl(struct inode*, struct file*,
+static int sync_serial_ioctl(struct file *,
unsigned int cmd, unsigned long arg);
static ssize_t sync_serial_write(struct file * file, const char * buf,
size_t count, loff_t *ppos);
@@ -241,13 +241,13 @@ static struct sync_port ports[]=
#define NBR_PORTS ARRAY_SIZE(ports)
static const struct file_operations sync_serial_fops = {
- .owner = THIS_MODULE,
- .write = sync_serial_write,
- .read = sync_serial_read,
- .poll = sync_serial_poll,
- .ioctl = sync_serial_ioctl,
- .open = sync_serial_open,
- .release = sync_serial_release
+ .owner = THIS_MODULE,
+ .write = sync_serial_write,
+ .read = sync_serial_read,
+ .poll = sync_serial_poll,
+ .unlocked_ioctl = sync_serial_ioctl,
+ .open = sync_serial_open,
+ .release = sync_serial_release
};
static int __init etrax_sync_serial_init(void)
@@ -650,7 +650,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
return mask;
}
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
int return_val = 0;
@@ -961,6 +961,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
return return_val;
}
+static long sync_serial_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ long ret;
+
+ lock_kernel();
+ ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
/* NOTE: sync_serial_write does not support concurrency */
static ssize_t sync_serial_write(struct file *file, const char *buf,
size_t count, loff_t *ppos)
diff --git a/arch/cris/arch-v32/kernel/cacheflush.S b/arch/cris/arch-v32/kernel/cacheflush.S
index 956e8fb82f0..6fc3d95d702 100644
--- a/arch/cris/arch-v32/kernel/cacheflush.S
+++ b/arch/cris/arch-v32/kernel/cacheflush.S
@@ -1,4 +1,5 @@
.global cris_flush_cache_range
+ .type cris_flush_cache_range, @function
cris_flush_cache_range:
move.d 1024, $r12
cmp.d $r11, $r12
@@ -80,8 +81,10 @@ cris_flush_1KB:
addq 32, $r10
ba cris_flush_cache_range
sub.d $r12, $r11
+ .size cris_flush_cache_range, . - cris_flush_cache_range
.global cris_flush_cache
+ .type cris_flush_cache, @function
cris_flush_cache:
moveq 0, $r10
cris_flush_line:
@@ -92,3 +95,5 @@ cris_flush_line:
fidxd [$r10]
ret
nop
+ .size cris_flush_cache, . - cris_flush_cache
+
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 1f39861eac8..0ecb50b8f0d 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -76,12 +76,15 @@ _need_resched:
; Called at exit from fork. schedule_tail must be called to drop
; spinlock if CONFIG_PREEMPT.
+ .type ret_from_fork,@function
ret_from_fork:
jsr schedule_tail
nop
ba ret_from_sys_call
nop
+ .size ret_from_fork, . - ret_from_fork
+ .type ret_from_intr,@function
ret_from_intr:
;; Check for resched if preemptive kernel, or if we're going back to
;; user-mode. This test matches the user_regs(regs) macro. Don't simply
@@ -91,9 +94,10 @@ ret_from_intr:
move.d [$acr], $r0
btstq 16, $r0 ; User-mode flag.
bpl _resume_kernel
+ .size ret_from_intr, . - ret_from_intr + 2 ; +2 includes the dslot.
; Note that di below is in delay slot.
-
+ .type _resume_userspace,@function
_resume_userspace:
di ; So need_resched and sigpending don't change.
@@ -107,6 +111,7 @@ _resume_userspace:
nop
ba _Rexit
nop
+ .size _resume_userspace, . - _resume_userspace
;; The system_call is called by a BREAK instruction, which looks pretty
;; much like any other exception.
@@ -122,30 +127,28 @@ _resume_userspace:
;; non-used instructions. Only the non-common cases cause the outlined code
;; to run..
+ .type system_call,@function
system_call:
;; Stack-frame similar to the irq heads, which is reversed in
;; ret_from_sys_call.
- subq 12, $sp ; Skip EXS, EDA.
- move $erp, [$sp]
- subq 4, $sp
- move $srp, [$sp]
- subq 4, $sp
- move $ccs, [$sp]
- subq 4, $sp
- ei ; Allow IRQs while handling system call
- move $spc, [$sp]
- subq 4, $sp
- move $mof, [$sp]
- subq 4, $sp
- move $srs, [$sp]
- subq 4, $sp
- move.d $acr, [$sp]
- subq 14*4, $sp ; Make room for R0-R13.
- movem $r13, [$sp] ; Push R0-R13
- subq 4, $sp
- move.d $r10, [$sp] ; Push orig_r10.
-; Set S-bit when kernel debugging to keep hardware breakpoints active.
+ sub.d 92, $sp ; Skip EXS and EDA.
+ movem $r13, [$sp]
+ move.d $sp, $r8
+ addq 14*4, $r8
+ move.d $acr, $r0
+ move $srs, $r1
+ move $mof, $r2
+ move $spc, $r3
+ move $ccs, $r4
+ move $srp, $r5
+ move $erp, $r6
+ subq 4, $sp
+ movem $r6, [$r8]
+ ei ; Enable interrupts while processing syscalls.
+ move.d $r10, [$sp]
+
+ ; Set S-bit when kernel debugging to keep hardware breakpoints active.
#ifdef CONFIG_ETRAX_KGDB
move $ccs, $r0
or.d (1<<9), $r0
@@ -217,7 +220,9 @@ ret_from_sys_call:
and.d _TIF_ALLWORK_MASK, $r1
bne _syscall_exit_work
nop
+ .size system_call, . - system_call
+ .type _Rexit,@function
_Rexit:
;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
;; and ptregs.h.
@@ -234,10 +239,12 @@ _Rexit:
addq 8, $sp ; Skip EXS, EDA.
jump $erp
rfe ; Restore condition code stack in delay-slot.
+ .size _Rexit, . - _Rexit
;; We get here after doing a syscall if extra work might need to be done
;; perform syscall exit tracing if needed.
+ .type _syscall_exit_work,@function
_syscall_exit_work:
;; R0 contains current at this point and irq's are disabled.
@@ -253,14 +260,18 @@ _syscall_exit_work:
move.d $r1, $r9
ba _resume_userspace
nop
+ .size _syscall_exit_work, . - _syscall_exit_work
+ .type _work_pending,@function
_work_pending:
addoq +TI_flags, $r0, $acr
move.d [$acr], $r10
btstq TIF_NEED_RESCHED, $r10 ; Need resched?
bpl _work_notifysig ; No, must be signal/notify.
nop
+ .size _work_pending, . - _work_pending
+ .type _work_resched,@function
_work_resched:
move.d $r9, $r1 ; Preserve R9.
jsr schedule
@@ -276,7 +287,9 @@ _work_resched:
btstq TIF_NEED_RESCHED, $r1
bmi _work_resched ; current->work.need_resched.
nop
+ .size _work_resched, . - _work_resched
+ .type _work_notifysig,@function
_work_notifysig:
;; Deal with pending signals and notify-resume requests.
@@ -288,6 +301,7 @@ _work_notifysig:
ba _Rexit
nop
+ .size _work_notifysig, . - _work_notifysig
;; We get here as a sidetrack when we've entered a syscall with the
;; trace-bit set. We need to call do_syscall_trace and then continue
@@ -329,41 +343,43 @@ _syscall_trace_entry:
;;
;; Returns old current in R10.
+ .type resume,@function
resume:
- subq 4, $sp
- move $srp, [$sp] ; Keep old/new PC on the stack.
+ subq 4, $sp ; Make space for srp.
+
add.d $r12, $r10 ; R10 = current tasks tss.
addoq +THREAD_ccs, $r10, $acr
+ move $srp, [$sp] ; Keep old/new PC on the stack.
move $ccs, [$acr] ; Save IRQ enable state.
di
addoq +THREAD_usp, $r10, $acr
+ subq 10*4, $sp ; Make room for R9.
move $usp, [$acr] ; Save user-mode stackpointer.
;; See copy_thread for the reason why register R9 is saved.
- subq 10*4, $sp
movem $r9, [$sp] ; Save non-scratch registers and R9.
addoq +THREAD_ksp, $r10, $acr
+ move.d $sp, $r10 ; Return last running task in R10.
move.d $sp, [$acr] ; Save kernel SP for old task.
- move.d $sp, $r10 ; Return last running task in R10.
and.d -8192, $r10 ; Get thread_info from stackpointer.
addoq +TI_task, $r10, $acr
- move.d [$acr], $r10 ; Get task.
add.d $r12, $r11 ; Find the new tasks tss.
+ move.d [$acr], $r10 ; Get task.
addoq +THREAD_ksp, $r11, $acr
move.d [$acr], $sp ; Switch to new stackframe.
+ addoq +THREAD_usp, $r11, $acr
movem [$sp+], $r9 ; Restore non-scratch registers and R9.
- addoq +THREAD_usp, $r11, $acr
move [$acr], $usp ; Restore user-mode stackpointer.
addoq +THREAD_ccs, $r11, $acr
+ move.d [$sp+], $r11
+ jump $r11 ; Restore PC.
move [$acr], $ccs ; Restore IRQ enable status.
- move.d [$sp+], $acr
- jump $acr ; Restore PC.
- nop
+ .size resume, . - resume
nmi_interrupt:
@@ -426,6 +442,7 @@ spurious_interrupt:
;; time. Jump to the first set interrupt bit in a priotiry fashion. The
;; hardware will call the unserved interrupts after the handler
;; finishes.
+ .type multiple_interrupt, @function
multiple_interrupt:
;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
subq 12, $sp ; Skip EXS, EDA.
@@ -458,6 +475,7 @@ multiple_interrupt:
move.d $sp, $r10
jump ret_from_intr
nop
+ .size multiple_interrupt, . - multiple_interrupt
do_sigtrap:
;; Sigtraps the process that executed the BREAK instruction. Creates a
@@ -514,11 +532,13 @@ _ugdb_handle_exception:
move.d [$sp+], $r0 ; Restore R0 in delay slot.
.global kernel_execve
+ .type kernel_execve,@function
kernel_execve:
move.d __NR_execve, $r9
break 13
ret
nop
+ .size kernel_execve, . - kernel_execve
.data
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index 76266f80a5f..5d502b9ab56 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -69,7 +69,13 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
;;
;; Note; 3 cycles is needed for a bank-select to take effect. Further;
;; bank 1 is the instruction MMU, bank 2 is the data MMU.
-#ifndef CONFIG_ETRAX_VCS_SIM
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
+#elif !defined(CONFIG_ETRAX_VCS_SIM)
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
@@ -88,7 +94,39 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
;; Enable certain page protections and setup linear mapping
;; for f,e,c,b,4,0.
-#ifndef CONFIG_ETRAX_VCS_SIM
+
+ ;; ARTPEC-3:
+ ;; c,d used for linear kernel mapping, up to 512 MB
+ ;; e used for vmalloc
+ ;; f unused, but page mapped to get page faults
+
+ ;; ETRAX FS:
+ ;; c used for linear kernel mapping, up to 256 MB
+ ;; d used for vmalloc
+ ;; e,f used for memory-mapped NOR flash
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
+ | REG_STATE(mmu, rw_mm_cfg, acc, on) \
+ | REG_STATE(mmu, rw_mm_cfg, ex, on) \
+ | REG_STATE(mmu, rw_mm_cfg, inv, on) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_f, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_e, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_d, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_a, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_9, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_8, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_7, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_6, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_5, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_4, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_3, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#elif !defined(CONFIG_ETRAX_VCS_SIM)
move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
| REG_STATE(mmu, rw_mm_cfg, acc, on) \
| REG_STATE(mmu, rw_mm_cfg, ex, on) \
@@ -329,7 +367,7 @@ _no_romfs_in_flash:
;; For jffs2, a jhead is prepended which contains with magic and length.
;; The jhead is not part of the jffs2 partition however.
#ifndef CONFIG_ETRAXFS_SIM
- move.d __vmlinux_end, $r0
+ move.d __bss_start, $r0
#else
move.d __end, $r0
#endif
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 0b1febe44aa..2ed48ae3d31 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -97,7 +97,11 @@ extern void breakh_BUG(void);
/*
* Build the IRQ handler stubs using macros from irq.h.
*/
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+BUILD_TIMER_IRQ(0x31, 0)
+#else
BUILD_IRQ(0x31)
+#endif
BUILD_IRQ(0x32)
BUILD_IRQ(0x33)
BUILD_IRQ(0x34)
@@ -123,7 +127,11 @@ BUILD_IRQ(0x47)
BUILD_IRQ(0x48)
BUILD_IRQ(0x49)
BUILD_IRQ(0x4a)
+#ifdef CONFIG_ETRAXFS
+BUILD_TIMER_IRQ(0x4b, 0)
+#else
BUILD_IRQ(0x4b)
+#endif
BUILD_IRQ(0x4c)
BUILD_IRQ(0x4d)
BUILD_IRQ(0x4e)
@@ -199,25 +207,20 @@ block_irq(int irq, int cpu)
unsigned long flags;
spin_lock_irqsave(&irq_lock, flags);
- if (irq - FIRST_IRQ < 32)
+ /* Remember, 1 let thru, 0 block. */
+ if (irq - FIRST_IRQ < 32) {
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 0);
- else
- intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
- rw_mask, 1);
-
- /* Remember; 1 let thru, 0 block. */
- if (irq - FIRST_IRQ < 32)
intr_mask &= ~(1 << (irq - FIRST_IRQ));
- else
- intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
-
- if (irq - FIRST_IRQ < 32)
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
0, intr_mask);
- else
+ } else {
+ intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
+ rw_mask, 1);
+ intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
1, intr_mask);
+ }
spin_unlock_irqrestore(&irq_lock, flags);
}
@@ -228,26 +231,20 @@ unblock_irq(int irq, int cpu)
unsigned long flags;
spin_lock_irqsave(&irq_lock, flags);
- if (irq - FIRST_IRQ < 32)
+ /* Remember, 1 let thru, 0 block. */
+ if (irq - FIRST_IRQ < 32) {
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 0);
- else
- intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
- rw_mask, 1);
-
- /* Remember; 1 let thru, 0 block. */
- if (irq - FIRST_IRQ < 32)
intr_mask |= (1 << (irq - FIRST_IRQ));
- else
- intr_mask |= (1 << (irq - FIRST_IRQ - 32));
-
- if (irq - FIRST_IRQ < 32)
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
0, intr_mask);
- else
+ } else {
+ intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
+ rw_mask, 1);
+ intr_mask |= (1 << (irq - FIRST_IRQ - 32));
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
1, intr_mask);
-
+ }
spin_unlock_irqrestore(&irq_lock, flags);
}
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index c981fd66332..6b653323d79 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -174,10 +174,10 @@
#include <asm/ptrace.h>
#include <asm/irq.h>
-#include <arch/hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/hwregs/intr_vect_defs.h>
-#include <arch/hwregs/ser_defs.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/intr_vect_defs.h>
+#include <hwregs/ser_defs.h>
/* From entry.S. */
extern void gdb_handle_exception(void);
@@ -988,26 +988,26 @@ stub_is_stopped(int sigval)
}
/* Only send PC, frame and stack pointer. */
read_register(PC, &reg_cont);
- ptr = pack_hex_byte(PC);
+ ptr = pack_hex_byte(ptr, PC);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
*ptr++ = ';';
read_register(R8, &reg_cont);
- ptr = pack_hex_byte(R8);
+ ptr = pack_hex_byte(ptr, R8);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
*ptr++ = ';';
read_register(SP, &reg_cont);
- ptr = pack_hex_byte(SP);
+ ptr = pack_hex_byte(ptr, SP);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
*ptr++ = ';';
/* Send ERP as well; this will save us an entire register fetch in some cases. */
read_register(ERP, &reg_cont);
- ptr = pack_hex_byte(ERP);
+ ptr = pack_hex_byte(ptr, ERP);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
*ptr++ = ';';
diff --git a/arch/cris/arch-v32/kernel/kgdb_asm.S b/arch/cris/arch-v32/kernel/kgdb_asm.S
index eba93e7e4aa..f3a47605902 100644
--- a/arch/cris/arch-v32/kernel/kgdb_asm.S
+++ b/arch/cris/arch-v32/kernel/kgdb_asm.S
@@ -5,7 +5,7 @@
* port exceptions for kernel debugging purposes.
*/
-#include <arch/hwregs/intr_vect.h>
+#include <hwregs/intr_vect.h>
;; Exported functions.
.globl kgdb_handle_exception
diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c
deleted file mode 100644
index f6f3637a419..00000000000
--- a/arch/cris/arch-v32/kernel/pinmux.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Allocator for I/O pins. All pins are allocated to GPIO at bootup.
- * Unassigned pins and GPIO pins can be allocated to a fixed interface
- * or the I/O processor instead.
- *
- * Copyright (c) 2004 Axis Communications AB.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <arch/hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/pinmux.h>
-#include <arch/hwregs/pinmux_defs.h>
-
-#undef DEBUG
-
-#define PORT_PINS 18
-#define PORTS 4
-
-static char pins[PORTS][PORT_PINS];
-static DEFINE_SPINLOCK(pinmux_lock);
-
-static void crisv32_pinmux_set(int port);
-
-int
-crisv32_pinmux_init(void)
-{
- static int initialized = 0;
-
- if (!initialized) {
- reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
- initialized = 1;
- pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
- pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
- REG_WR(pinmux, regi_pinmux, rw_pa, pa);
- crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
- crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
- crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio);
- crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio);
- }
-
- return 0;
-}
-
-int
-crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
-{
- int i;
- unsigned long flags;
-
- crisv32_pinmux_init();
-
- if (port > PORTS || port < 0)
- return -EINVAL;
-
- spin_lock_irqsave(&pinmux_lock, flags);
-
- for (i = first_pin; i <= last_pin; i++)
- {
- if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
- (pins[port][i] != mode))
- {
- spin_unlock_irqrestore(&pinmux_lock, flags);
-#ifdef DEBUG
- panic("Pinmux alloc failed!\n");
-#endif
- return -EPERM;
- }
- }
-
- for (i = first_pin; i <= last_pin; i++)
- pins[port][i] = mode;
-
- crisv32_pinmux_set(port);
-
- spin_unlock_irqrestore(&pinmux_lock, flags);
-
- return 0;
-}
-
-int
-crisv32_pinmux_alloc_fixed(enum fixed_function function)
-{
- int ret = -EINVAL;
- char saved[sizeof pins];
- unsigned long flags;
-
- spin_lock_irqsave(&pinmux_lock, flags);
-
- /* Save internal data for recovery */
- memcpy(saved, pins, sizeof pins);
-
- reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-
- switch(function)
- {
- case pinmux_ser1:
- ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
- hwprot.ser1 = regk_pinmux_yes;
- break;
- case pinmux_ser2:
- ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
- hwprot.ser2 = regk_pinmux_yes;
- break;
- case pinmux_ser3:
- ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
- hwprot.ser3 = regk_pinmux_yes;
- break;
- case pinmux_sser0:
- ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
- ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
- hwprot.sser0 = regk_pinmux_yes;
- break;
- case pinmux_sser1:
- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
- hwprot.sser1 = regk_pinmux_yes;
- break;
- case pinmux_ata0:
- ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
- ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
- hwprot.ata0 = regk_pinmux_yes;
- break;
- case pinmux_ata1:
- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
- ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
- hwprot.ata1 = regk_pinmux_yes;
- break;
- case pinmux_ata2:
- ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
- ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
- hwprot.ata2 = regk_pinmux_yes;
- break;
- case pinmux_ata3:
- ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
- ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
- hwprot.ata2 = regk_pinmux_yes;
- break;
- case pinmux_ata:
- ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
- ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
- hwprot.ata = regk_pinmux_yes;
- break;
- case pinmux_eth1:
- ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
- hwprot.eth1 = regk_pinmux_yes;
- hwprot.eth1_mgm = regk_pinmux_yes;
- break;
- case pinmux_timer:
- ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
- hwprot.timer = regk_pinmux_yes;
- spin_unlock_irqrestore(&pinmux_lock, flags);
- return ret;
- }
-
- if (!ret)
- REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
- else
- memcpy(pins, saved, sizeof pins);
-
- spin_unlock_irqrestore(&pinmux_lock, flags);
-
- return ret;
-}
-
-void
-crisv32_pinmux_set(int port)
-{
- int i;
- int gpio_val = 0;
- int iop_val = 0;
-
- for (i = 0; i < PORT_PINS; i++)
- {
- if (pins[port][i] == pinmux_gpio)
- gpio_val |= (1 << i);
- else if (pins[port][i] == pinmux_iop)
- iop_val |= (1 << i);
- }
-
- REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val);
- REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val);
-
-#ifdef DEBUG
- crisv32_pinmux_dump();
-#endif
-}
-
-int
-crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
-{
- int i;
- unsigned long flags;
-
- crisv32_pinmux_init();
-
- if (port > PORTS || port < 0)
- return -EINVAL;
-
- spin_lock_irqsave(&pinmux_lock, flags);
-
- for (i = first_pin; i <= last_pin; i++)
- pins[port][i] = pinmux_none;
-
- crisv32_pinmux_set(port);
- spin_unlock_irqrestore(&pinmux_lock, flags);
-
- return 0;
-}
-
-void
-crisv32_pinmux_dump(void)
-{
- int i, j;
-
- crisv32_pinmux_init();
-
- for (i = 0; i < PORTS; i++)
- {
- printk("Port %c\n", 'B'+i);
- for (j = 0; j < PORT_PINS; j++)
- printk(" Pin %d = %d\n", j, pins[i][j]);
- }
-}
-
-__initcall(crisv32_pinmux_init);
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c
index 72e9e8331f6..61e10ae6529 100644
--- a/arch/cris/arch-v32/kernel/setup.c
+++ b/arch/cris/arch-v32/kernel/setup.c
@@ -9,6 +9,9 @@
#include <linux/delay.h>
#include <linux/param.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+
#ifdef CONFIG_PROC_FS
#define HAS_FPU 0x0001
@@ -43,14 +46,15 @@ static struct cpu_info cpinfo[] = {
{"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
| HAS_MMU},
-
+#ifdef CONFIG_ETRAXFS
{"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
-
+#else
+ {"ARTPEC-3", 32, 32, HAS_ETHERNET100 | HAS_MMU},
+#endif
{"Unknown", 0, 0, 0}
};
-int
-show_cpuinfo(struct seq_file *m, void *v)
+int show_cpuinfo(struct seq_file *m, void *v)
{
int i;
int cpu = (int)v - 1;
@@ -107,9 +111,63 @@ show_cpuinfo(struct seq_file *m, void *v)
#endif /* CONFIG_PROC_FS */
-void
-show_etrax_copyright(void)
+void show_etrax_copyright(void)
+{
+#ifdef CONFIG_ETRAXFS
+ printk(KERN_INFO "Linux/CRISv32 port on ETRAX FS "
+ "(C) 2003, 2004 Axis Communications AB\n");
+#else
+ printk(KERN_INFO "Linux/CRISv32 port on ARTPEC-3 "
+ "(C) 2003-2009 Axis Communications AB\n");
+#endif
+}
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {I2C_BOARD_INFO("camblock", 0x43)},
+ {I2C_BOARD_INFO("tmp100", 0x48)},
+ {I2C_BOARD_INFO("tmp100", 0x4A)},
+ {I2C_BOARD_INFO("tmp100", 0x4C)},
+ {I2C_BOARD_INFO("tmp100", 0x4D)},
+ {I2C_BOARD_INFO("tmp100", 0x4E)},
+#ifdef CONFIG_RTC_DRV_PCF8563
+ {I2C_BOARD_INFO("pcf8563", 0x51)},
+#endif
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ {I2C_BOARD_INFO("vgpio", 0x20)},
+ {I2C_BOARD_INFO("vgpio", 0x21)},
+#endif
+ {I2C_BOARD_INFO("pca9536", 0x41)},
+ {I2C_BOARD_INFO("fnp300", 0x40)},
+ {I2C_BOARD_INFO("fnp300", 0x42)},
+ {I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static struct i2c_board_info __initdata i2c_info2[] = {
+ {I2C_BOARD_INFO("camblock", 0x43)},
+ {I2C_BOARD_INFO("tmp100", 0x48)},
+ {I2C_BOARD_INFO("tmp100", 0x4A)},
+ {I2C_BOARD_INFO("tmp100", 0x4C)},
+ {I2C_BOARD_INFO("tmp100", 0x4D)},
+ {I2C_BOARD_INFO("tmp100", 0x4E)},
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ {I2C_BOARD_INFO("vgpio", 0x20)},
+ {I2C_BOARD_INFO("vgpio", 0x21)},
+#endif
+ {I2C_BOARD_INFO("pca9536", 0x41)},
+ {I2C_BOARD_INFO("fnp300", 0x40)},
+ {I2C_BOARD_INFO("fnp300", 0x42)},
+ {I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static struct i2c_board_info __initdata i2c_info3[] = {
+ {I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static int __init etrax_init(void)
{
- printk(KERN_INFO
- "Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n");
+ i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+ i2c_register_board_info(1, i2c_info2, ARRAY_SIZE(i2c_info2));
+ i2c_register_board_info(2, i2c_info3, ARRAY_SIZE(i2c_info3));
+ return 0;
}
+arch_initcall(etrax_init);
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 0b7e3f14328..b3a05ae5621 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -587,7 +587,7 @@ do_signal(int canrestart, struct pt_regs *regs)
}
if (regs->r10 == -ERESTART_RESTARTBLOCK){
- regs->r10 = __NR_restart_syscall;
+ regs->r9 = __NR_restart_syscall;
regs->erp -= 2;
}
}
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 1ee0e101022..a545211e999 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -1,13 +1,13 @@
/*
* linux/arch/cris/arch-v32/kernel/time.c
*
- * Copyright (C) 2003-2007 Axis Communications AB
+ * Copyright (C) 2003-2010 Axis Communications AB
*
*/
#include <linux/timex.h>
#include <linux/time.h>
-#include <linux/jiffies.h>
+#include <linux/clocksource.h>
#include <linux/interrupt.h>
#include <linux/swap.h>
#include <linux/sched.h>
@@ -36,6 +36,30 @@
/* Number of 763 counts before watchdog bites */
#define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1)
+/* Register the continuos readonly timer available in FS and ARTPEC-3. */
+static cycle_t read_cont_rotime(struct clocksource *cs)
+{
+ return (u32)REG_RD(timer, regi_timer0, r_time);
+}
+
+static struct clocksource cont_rotime = {
+ .name = "crisv32_rotime",
+ .rating = 300,
+ .read = read_cont_rotime,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 10,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init etrax_init_cont_rotime(void)
+{
+ cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
+ clocksource_register(&cont_rotime);
+ return 0;
+}
+arch_initcall(etrax_init_cont_rotime);
+
+
unsigned long timer_regs[NR_CPUS] =
{
regi_timer0,
@@ -67,43 +91,6 @@ unsigned long get_ns_in_jiffie(void)
return ns;
}
-unsigned long do_slow_gettimeoffset(void)
-{
- unsigned long count;
- unsigned long usec_count = 0;
-
- /* For the first call after boot */
- static unsigned long count_p = TIMER0_DIV;
- static unsigned long jiffies_p = 0;
-
- /* Cache volatile jiffies temporarily; we have IRQs turned off. */
- unsigned long jiffies_t;
-
- /* The timer interrupt comes from Etrax timer 0. In order to get
- * better precision, we check the current value. It might have
- * underflowed already though. */
- count = REG_RD(timer, regi_timer0, r_tmr0_data);
- jiffies_t = jiffies;
-
- /* Avoiding timer inconsistencies (they are rare, but they happen)
- * There is one problem that must be avoided here:
- * 1. the timer counter underflows
- */
- if( jiffies_t == jiffies_p ) {
- if( count > count_p ) {
- /* Timer wrapped, use new count and prescale.
- * Increase the time corresponding to one jiffy.
- */
- usec_count = 1000000/HZ;
- }
- } else
- jiffies_p = jiffies_t;
- count_p = count;
- /* Convert timer value to usec */
- /* 100 MHz timer, divide by 100 to get usec */
- usec_count += (TIMER0_DIV - count) / 100;
- return usec_count;
-}
/* From timer MDS describing the hardware watchdog:
* 4.3.1 Watchdog Operation
@@ -126,8 +113,7 @@ static short int watchdog_key = 42; /* arbitrary 7 bit number */
* is used though, so set this really low. */
#define WATCHDOG_MIN_FREE_PAGES 8
-void
-reset_watchdog(void)
+void reset_watchdog(void)
{
#if defined(CONFIG_ETRAX_WATCHDOG)
reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
@@ -147,8 +133,7 @@ reset_watchdog(void)
/* stop the watchdog - we still need the correct key */
-void
-stop_watchdog(void)
+void stop_watchdog(void)
{
#if defined(CONFIG_ETRAX_WATCHDOG)
reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
@@ -162,8 +147,7 @@ stop_watchdog(void)
extern void show_registers(struct pt_regs *regs);
-void
-handle_watchdog_bite(struct pt_regs* regs)
+void handle_watchdog_bite(struct pt_regs *regs)
{
#if defined(CONFIG_ETRAX_WATCHDOG)
extern int cause_of_death;
@@ -203,8 +187,7 @@ handle_watchdog_bite(struct pt_regs* regs)
*/
extern void cris_do_profile(struct pt_regs *regs);
-static inline irqreturn_t
-timer_interrupt(int irq, void *dev_id)
+static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct pt_regs *regs = get_irq_regs();
int cpu = smp_processor_id();
@@ -233,7 +216,9 @@ timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
/* Call the real timer interrupt handler */
+ write_seqlock(&xtime_lock);
do_timer(1);
+ write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
@@ -246,8 +231,7 @@ static struct irqaction irq_timer = {
.name = "timer"
};
-void __init
-cris_timer_init(void)
+void __init cris_timer_init(void)
{
int cpu = smp_processor_id();
reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
@@ -273,8 +257,7 @@ cris_timer_init(void)
REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
}
-void __init
-time_init(void)
+void __init time_init(void)
{
reg_intr_vect_rw_mask intr_mask;
diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
index 9003e382cad..8bbe09c9313 100644
--- a/arch/cris/arch-v32/kernel/traps.c
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -9,8 +9,7 @@
#include <hwregs/intr_vect_defs.h>
#include <asm/irq.h>
-void
-show_registers(struct pt_regs *regs)
+void show_registers(struct pt_regs *regs)
{
/*
* It's possible to use either the USP register or current->thread.usp.
@@ -101,8 +100,7 @@ bad_value:
}
}
-void
-arch_enable_nmi(void)
+void arch_enable_nmi(void)
{
unsigned long flags;
diff --git a/arch/cris/arch-v32/lib/checksum.S b/arch/cris/arch-v32/lib/checksum.S
index 87f3fd71ab1..4a72a94a49a 100644
--- a/arch/cris/arch-v32/lib/checksum.S
+++ b/arch/cris/arch-v32/lib/checksum.S
@@ -6,6 +6,7 @@
*/
.globl csum_partial
+ .type csum_partial,@function
csum_partial:
;; r10 - src
@@ -83,3 +84,5 @@ _do_byte:
addu.b [$r10],$r12
ret
move.d $r12,$r10
+
+ .size csum_partial, .-csum_partial
diff --git a/arch/cris/arch-v32/lib/checksumcopy.S b/arch/cris/arch-v32/lib/checksumcopy.S
index 21aabe91489..54e209f18b0 100644
--- a/arch/cris/arch-v32/lib/checksumcopy.S
+++ b/arch/cris/arch-v32/lib/checksumcopy.S
@@ -9,6 +9,7 @@
*/
.globl csum_partial_copy_nocheck
+ .type csum_partial_copy_nocheck,@function
csum_partial_copy_nocheck:
;; r10 - src
@@ -89,3 +90,5 @@ _do_byte:
move.b $r9,[$r11]
ret
move.d $r13,$r10
+
+ .size csum_partial_copy_nocheck, . - csum_partial_copy_nocheck
diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S
index 79087ef59a1..fe610b9d775 100644
--- a/arch/cris/arch-v32/lib/spinlock.S
+++ b/arch/cris/arch-v32/lib/spinlock.S
@@ -6,7 +6,9 @@
.global cris_spin_lock
+ .type cris_spin_lock,@function
.global cris_spin_trylock
+ .type cris_spin_trylock,@function
.text
@@ -22,6 +24,8 @@ cris_spin_lock:
ret
nop
+ .size cris_spin_lock, . - cris_spin_lock
+
cris_spin_trylock:
clearf p
1: move.b [$r10], $r11
@@ -31,3 +35,6 @@ cris_spin_trylock:
clearf p
ret
movu.b $r11,$r10
+
+ .size cris_spin_trylock, . - cris_spin_trylock
+
diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig
index a4df06d5997..7796aafc711 100644
--- a/arch/cris/arch-v32/mach-a3/Kconfig
+++ b/arch/cris/arch-v32/mach-a3/Kconfig
@@ -33,6 +33,10 @@ config ETRAX_DDR2_CONFIG
hex "DDR2 config"
default "0"
+config ETRAX_DDR2_LATENCY
+ hex "DDR2 latency"
+ default "0"
+
config ETRAX_PIO_CE0_CFG
hex "PIO CE0 configuration"
default "0"
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S
index 94d6b41cb29..ec8648be32d 100644
--- a/arch/cris/arch-v32/mach-a3/dram_init.S
+++ b/arch/cris/arch-v32/mach-a3/dram_init.S
@@ -24,11 +24,21 @@
;; Refer to ddr2 MDS for initialization sequence
+ ; 2. Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
; Start clock
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0
move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1
move.d $r1, [$r0]
+ ; 2. Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
; Reset phy and start calibration
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0
move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \
@@ -52,6 +62,10 @@ do_cmd:
lslq 16, $r1
or.d $r3, $r1
move.d $r1, [$r0]
+ ; 2. Wait 200us
+ move.d 10000, $r4
+1: bne 1b
+ subq 1, $r4
cmp.d sdram_commands_end, $r2
blo command_loop
nop
@@ -63,7 +77,7 @@ do_cmd:
; Set latency
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0
- move.d 0x13, $r1
+ move.d CONFIG_ETRAX_DDR2_LATENCY, $r1
move.d $r1, [$r0]
; Set configuration
diff --git a/arch/cris/arch-v32/mach-a3/hw_settings.S b/arch/cris/arch-v32/mach-a3/hw_settings.S
index 258a6329cd4..0145725a1ce 100644
--- a/arch/cris/arch-v32/mach-a3/hw_settings.S
+++ b/arch/cris/arch-v32/mach-a3/hw_settings.S
@@ -31,6 +31,8 @@
; Register values
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg)
.dword CONFIG_ETRAX_DDR2_CONFIG
+ .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency)
+ .dword CONFIG_ETRAX_DDR2_LATENCY
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing)
.dword CONFIG_ETRAX_DDR2_TIMING
.dword CONFIG_ETRAX_DDR2_MRS
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index caeb921a92e..0768bc409ca 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -27,8 +27,7 @@ extern void tlb_init(void);
* at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various
* other paging stuff.
*/
-void __init
-cris_mmu_init(void)
+void __init cris_mmu_init(void)
{
unsigned long mmu_config;
unsigned long mmu_kbase_hi;
@@ -55,14 +54,23 @@ cris_mmu_init(void)
/* Initialise the TLB. Function found in tlb.c. */
tlb_init();
- /* Enable exceptions and initialize the kernel segments. */
+ /*
+ * Enable exceptions and initialize the kernel segments.
+ * See head.S for differences between ARTPEC-3 and ETRAX FS.
+ */
mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on) |
REG_STATE(mmu, rw_mm_cfg, acc, on) |
REG_STATE(mmu, rw_mm_cfg, ex, on) |
REG_STATE(mmu, rw_mm_cfg, inv, on) |
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ REG_STATE(mmu, rw_mm_cfg, seg_f, page) |
+ REG_STATE(mmu, rw_mm_cfg, seg_e, page) |
+ REG_STATE(mmu, rw_mm_cfg, seg_d, linear) |
+#else
REG_STATE(mmu, rw_mm_cfg, seg_f, linear) |
REG_STATE(mmu, rw_mm_cfg, seg_e, linear) |
REG_STATE(mmu, rw_mm_cfg, seg_d, page) |
+#endif
REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
#ifndef CONFIG_ETRAX_VCS_SIM
@@ -81,9 +89,15 @@ cris_mmu_init(void)
REG_STATE(mmu, rw_mm_cfg, seg_1, page) |
REG_STATE(mmu, rw_mm_cfg, seg_0, page));
+ /* See head.S for differences between ARTPEC-3 and ETRAX FS. */
mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) |
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x0) |
+ REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x5) |
+#else
REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) |
REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) |
+#endif
REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
#ifndef CONFIG_ETRAX_VCS_SIM
@@ -129,8 +143,7 @@ cris_mmu_init(void)
SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */
}
-void __init
-paging_init(void)
+void __init paging_init(void)
{
int i;
unsigned long zones_size[MAX_NR_ZONES];
diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S
index f125d912e14..72727c1d8e6 100644
--- a/arch/cris/arch-v32/mm/mmu.S
+++ b/arch/cris/arch-v32/mm/mmu.S
@@ -38,6 +38,7 @@
; to handle the fault.
.macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex
.globl \handler
+ .type \handler,"function"
\handler:
SAVE_ALL
move \mmu, $srs ; Select MMU support register bank
@@ -52,6 +53,7 @@
nop
ba ret_from_intr
nop
+ .size \handler, . - \handler
.endm
; Refill handler. Three cases may occur:
@@ -84,6 +86,7 @@
2: .dword 0 ; last_refill_cause
.text
.globl \handler
+ .type \handler, "function"
\handler:
subq 4, $sp
; (The pipeline stalls for one cycle; $sp used as address in the next cycle.)
@@ -196,6 +199,7 @@
; Return
ba ret_from_intr
nop
+ .size \handler, . - \handler
.endm
; This is the MMU bus fault handlers.
diff --git a/arch/cris/boot/Makefile b/arch/cris/boot/Makefile
index 144f3afa011..6e3b509fd7f 100644
--- a/arch/cris/boot/Makefile
+++ b/arch/cris/boot/Makefile
@@ -3,7 +3,7 @@
#
objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
-objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss --remove-section=.note.gnu.build-id
OBJCOPYFLAGS = -O binary $(objcopyflags-y)
diff --git a/arch/cris/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
index 47bc190ba6d..548d886b03d 100644
--- a/arch/cris/boot/compressed/misc.c
+++ b/arch/cris/boot/compressed/misc.c
@@ -106,7 +106,7 @@ static unsigned outcnt = 0; /* bytes in output buffer */
static void flush_window(void);
static void error(char *m);
-static void puts(const char *);
+static void aputs(const char *s);
extern char *input_data; /* lives in head.S */
@@ -137,52 +137,37 @@ static inline void serout(const char *s, reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_dout, dout);
}
+#define SEROUT(S, N) \
+ do { \
+ serout(S, regi_ser ## N); \
+ s++; \
+ } while (0)
+#else
+#define SEROUT(S, N) do { \
+ while (!(*R_SERIAL ## N ## _STATUS & (1 << 5))) \
+ ; \
+ *R_SERIAL ## N ## _TR_DATA = *s++; \
+ } while (0)
#endif
-static void puts(const char *s)
+static void aputs(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
-#ifdef CONFIG_ETRAX_ARCH_V32
- serout(s, regi_ser0);
-#else
- while (!(*R_SERIAL0_STATUS & (1 << 5)))
- ;
- *R_SERIAL0_TR_DATA = *s++;
-#endif
+ SEROUT(s, 0);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
-#ifdef CONFIG_ETRAX_ARCH_V32
- serout(s, regi_ser1);
-#else
- while (!(*R_SERIAL1_STATUS & (1 << 5)))
- ;
- *R_SERIAL1_TR_DATA = *s++;
-#endif
+ SEROUT(s, 1);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
-#ifdef CONFIG_ETRAX_ARCH_V32
- serout(s, regi_ser2);
-#else
- while (!(*R_SERIAL2_STATUS & (1 << 5)))
- ;
- *R_SERIAL2_TR_DATA = *s++;
-#endif
+ SEROUT(s, 2);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
-#ifdef CONFIG_ETRAX_ARCH_V32
- serout(s, regi_ser3);
-#else
- while (!(*R_SERIAL3_STATUS & (1 << 5)))
- ;
- *R_SERIAL3_TR_DATA = *s++;
+ SEROUT(s, 3);
#endif
-#endif
- *s++;
}
-/* CONFIG_ETRAX_DEBUG_PORT_NULL */
-#endif
+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
}
void *memset(void *s, int c, size_t n)
@@ -233,9 +218,9 @@ static void flush_window(void)
static void error(char *x)
{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted\n");
+ aputs("\n\n");
+ aputs(x);
+ aputs("\n\n -- System halted\n");
while(1); /* Halt */
}
@@ -378,14 +363,14 @@ void decompress_kernel(void)
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < compile_rev) {
#ifdef CONFIG_ETRAX_ARCH_V32
- puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+ aputs("You need at least ETRAX FS to run Linux 2.6/crisv32\n");
#else
- puts("You need an ETRAX 100LX to run linux 2.6\n");
+ aputs("You need an ETRAX 100LX to run linux 2.6/crisv10\n");
#endif
while(1);
}
- puts("Uncompressing Linux...\n");
+ aputs("Uncompressing Linux...\n");
gunzip();
- puts("Done. Now booting the kernel\n");
+ aputs("Done. Now booting the kernel\n");
}
diff --git a/arch/cris/include/arch-v32/arch/cache.h b/arch/cris/include/arch-v32/arch/cache.h
index dfc73050e6b..1de779f4f24 100644
--- a/arch/cris/include/arch-v32/arch/cache.h
+++ b/arch/cris/include/arch-v32/arch/cache.h
@@ -7,6 +7,8 @@
#define L1_CACHE_BYTES 32
#define L1_CACHE_SHIFT 5
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
void flush_dma_list(dma_descr_data *descr);
void flush_dma_descr(dma_descr_data *descr, int flush_buf);
diff --git a/arch/cris/include/arch-v32/arch/dma.h b/arch/cris/include/arch-v32/arch/dma.h
index 3674081389f..61906153a9a 100644
--- a/arch/cris/include/arch-v32/arch/dma.h
+++ b/arch/cris/include/arch-v32/arch/dma.h
@@ -1,79 +1 @@
-#ifndef _ASM_ARCH_CRIS_DMA_H
-#define _ASM_ARCH_CRIS_DMA_H
-
-/* Defines for using and allocating dma channels. */
-
-#define MAX_DMA_CHANNELS 10
-
-#define NETWORK_ETH0_TX_DMA_NBR 0 /* Ethernet 0 out. */
-#define NETWORK_ETH0 RX_DMA_NBR 1 /* Ethernet 0 in. */
-
-#define IO_PROC_DMA0_TX_DMA_NBR 2 /* IO processor DMA0 out. */
-#define IO_PROC_DMA0_RX_DMA_NBR 3 /* IO processor DMA0 in. */
-
-#define ATA_TX_DMA_NBR 2 /* ATA interface out. */
-#define ATA_RX_DMA_NBR 3 /* ATA interface in. */
-
-#define ASYNC_SER2_TX_DMA_NBR 2 /* Asynchronous serial port 2 out. */
-#define ASYNC_SER2_RX_DMA_NBR 3 /* Asynchronous serial port 2 in. */
-
-#define IO_PROC_DMA1_TX_DMA_NBR 4 /* IO processor DMA1 out. */
-#define IO_PROC_DMA1_RX_DMA_NBR 5 /* IO processor DMA1 in. */
-
-#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */
-#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */
-
-#define SYNC_SER0_TX_DMA_NBR 4 /* Synchronous serial port 0 out. */
-#define SYNC_SER0_RX_DMA_NBR 5 /* Synchronous serial port 0 in. */
-
-#define EXTDMA0_TX_DMA_NBR 6 /* External DMA 0 out. */
-#define EXTDMA1_RX_DMA_NBR 7 /* External DMA 1 in. */
-
-#define ASYNC_SER0_TX_DMA_NBR 6 /* Asynchronous serial port 0 out. */
-#define ASYNC_SER0_RX_DMA_NBR 7 /* Asynchronous serial port 0 in. */
-
-#define SYNC_SER1_TX_DMA_NBR 6 /* Synchronous serial port 1 out. */
-#define SYNC_SER1_RX_DMA_NBR 7 /* Synchronous serial port 1 in. */
-
-#define NETWORK_ETH1_TX_DMA_NBR 6 /* Ethernet 1 out. */
-#define NETWORK_ETH1_RX_DMA_NBR 7 /* Ethernet 1 in. */
-
-#define EXTDMA2_TX_DMA_NBR 8 /* External DMA 2 out. */
-#define EXTDMA3_RX_DMA_NBR 9 /* External DMA 3 in. */
-
-#define STRCOP_TX_DMA_NBR 8 /* Stream co-processor out. */
-#define STRCOP_RX_DMA_NBR 9 /* Stream co-processor in. */
-
-#define ASYNC_SER3_TX_DMA_NBR 8 /* Asynchronous serial port 3 out. */
-#define ASYNC_SER3_RX_DMA_NBR 9 /* Asynchronous serial port 3 in. */
-
-enum dma_owner
-{
- dma_eth0,
- dma_eth1,
- dma_iop0,
- dma_iop1,
- dma_ser0,
- dma_ser1,
- dma_ser2,
- dma_ser3,
- dma_sser0,
- dma_sser1,
- dma_ata,
- dma_strp,
- dma_ext0,
- dma_ext1,
- dma_ext2,
- dma_ext3
-};
-
-int crisv32_request_dma(unsigned int dmanr, const char * device_id,
- unsigned options, unsigned bandwidth, enum dma_owner owner);
-void crisv32_free_dma(unsigned int dmanr);
-
-/* Masks used by crisv32_request_dma options: */
-#define DMA_VERBOSE_ON_ERROR 1
-#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
-#define DMA_INT_MEM 4
-
-#endif /* _ASM_ARCH_CRIS_DMA_H */
+#include "mach/dma.h"
diff --git a/arch/cris/include/arch-v32/arch/io.h b/arch/cris/include/arch-v32/arch/io.h
index 72024452cea..adc5484351b 100644
--- a/arch/cris/include/arch-v32/arch/io.h
+++ b/arch/cris/include/arch-v32/arch/io.h
@@ -46,10 +46,12 @@ static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags);
- if (val)
- *iopin->port->data |= iopin->bit;
- else
- *iopin->port->data &= ~iopin->bit;
+ if (iopin->port->data) {
+ if (val)
+ *iopin->port->data |= iopin->bit;
+ else
+ *iopin->port->data &= ~iopin->bit;
+ }
spin_unlock_irqrestore(&iopin->port->lock, flags);
}
@@ -60,10 +62,12 @@ static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags);
- if (dir == crisv32_io_dir_in)
- *iopin->port->oe &= ~iopin->bit;
- else
- *iopin->port->oe |= iopin->bit;
+ if (iopin->port->oe) {
+ if (dir == crisv32_io_dir_in)
+ *iopin->port->oe &= ~iopin->bit;
+ else
+ *iopin->port->oe |= iopin->bit;
+ }
spin_unlock_irqrestore(&iopin->port->lock, flags);
}
diff --git a/arch/cris/include/arch-v32/arch/memmap.h b/arch/cris/include/arch-v32/arch/memmap.h
index d29df5644d3..81985c0a678 100644
--- a/arch/cris/include/arch-v32/arch/memmap.h
+++ b/arch/cris/include/arch-v32/arch/memmap.h
@@ -1,24 +1 @@
-#ifndef _ASM_ARCH_MEMMAP_H
-#define _ASM_ARCH_MEMMAP_H
-
-#define MEM_CSE0_START (0x00000000)
-#define MEM_CSE0_SIZE (0x04000000)
-#define MEM_CSE1_START (0x04000000)
-#define MEM_CSE1_SIZE (0x04000000)
-#define MEM_CSR0_START (0x08000000)
-#define MEM_CSR1_START (0x0c000000)
-#define MEM_CSP0_START (0x10000000)
-#define MEM_CSP1_START (0x14000000)
-#define MEM_CSP2_START (0x18000000)
-#define MEM_CSP3_START (0x1c000000)
-#define MEM_CSP4_START (0x20000000)
-#define MEM_CSP5_START (0x24000000)
-#define MEM_CSP6_START (0x28000000)
-#define MEM_CSP7_START (0x2c000000)
-#define MEM_INTMEM_START (0x38000000)
-#define MEM_INTMEM_SIZE (0x00020000)
-#define MEM_DRAM_START (0x40000000)
-
-#define MEM_NON_CACHEABLE (0x80000000)
-
-#endif
+#include <mach/memmap.h>
diff --git a/arch/cris/include/arch-v32/arch/pgtable.h b/arch/cris/include/arch-v32/arch/pgtable.h
index 08cb7ff7e4e..c1051a8da33 100644
--- a/arch/cris/include/arch-v32/arch/pgtable.h
+++ b/arch/cris/include/arch-v32/arch/pgtable.h
@@ -2,8 +2,16 @@
#define _ASM_CRIS_ARCH_PGTABLE_H
/* Define the kernels virtual memory area. */
+
+/* See head.S for differences between ARTPEC-3 and ETRAX FS. */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#define VMALLOC_START KSEG_E
+#define VMALLOC_END KSEG_F
+#else
#define VMALLOC_START KSEG_D
#define VMALLOC_END KSEG_E
+#endif
+
#define VMALLOC_VMADDR(x) ((unsigned long)(x))
#endif /* _ASM_CRIS_ARCH_PGTABLE_H */
diff --git a/arch/cris/include/arch-v32/arch/uaccess.h b/arch/cris/include/arch-v32/arch/uaccess.h
index 6b207f1b662..3196019706c 100644
--- a/arch/cris/include/arch-v32/arch/uaccess.h
+++ b/arch/cris/include/arch-v32/arch/uaccess.h
@@ -122,14 +122,14 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm__ __volatile__ (
" move.d %3,%0\n"
"5: move.b [%2+],$acr\n"
- "1: beq 2f\n"
+ "1: beq 6f\n"
" move.b $acr,[%1+]\n"
" subq 1,%0\n"
"2: bne 1b\n"
" move.b [%2+],$acr\n"
- " sub.d %3,%0\n"
+ "6: sub.d %3,%0\n"
" neg.d %0,%0\n"
"3:\n"
" .section .fixup,\"ax\"\n"
@@ -140,8 +140,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
/* The address for a fault at the first move is trivial.
The address for a fault at the second move is that of
the preceding branch insn, since the move insn is in
- its delay-slot. That address is also a branch
- target. Just so you don't get confused... */
+ its delay-slot. Just so you don't get confused... */
" .previous\n"
" .section __ex_table,\"a\"\n"
" .dword 5b,4b\n"
diff --git a/arch/cris/include/arch-v32/mach-a3/mach/dma.h b/arch/cris/include/arch-v32/mach-a3/mach/dma.h
index 9e8eb13b601..f01dca1ad10 100644
--- a/arch/cris/include/arch-v32/mach-a3/mach/dma.h
+++ b/arch/cris/include/arch-v32/mach-a3/mach/dma.h
@@ -5,6 +5,33 @@
#define MAX_DMA_CHANNELS 12 /* 8 and 10 not used. */
+#define NETWORK_ETH_TX_DMA_NBR 0 /* Ethernet 0 out. */
+#define NETWORK_ETH_RX_DMA_NBR 1 /* Ethernet 0 in. */
+
+#define IO_PROC_DMA_TX_DMA_NBR 4 /* IO processor DMA0 out. */
+#define IO_PROC_DMA_RX_DMA_NBR 5 /* IO processor DMA0 in. */
+
+#define ASYNC_SER3_TX_DMA_NBR 2 /* Asynchronous serial port 3 out. */
+#define ASYNC_SER3_RX_DMA_NBR 3 /* Asynchronous serial port 3 in. */
+
+#define ASYNC_SER2_TX_DMA_NBR 6 /* Asynchronous serial port 2 out. */
+#define ASYNC_SER2_RX_DMA_NBR 7 /* Asynchronous serial port 2 in. */
+
+#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */
+#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */
+
+#define SYNC_SER_TX_DMA_NBR 6 /* Synchronous serial port 0 out. */
+#define SYNC_SER_RX_DMA_NBR 7 /* Synchronous serial port 0 in. */
+
+#define ASYNC_SER0_TX_DMA_NBR 0 /* Asynchronous serial port 0 out. */
+#define ASYNC_SER0_RX_DMA_NBR 1 /* Asynchronous serial port 0 in. */
+
+#define STRCOP_TX_DMA_NBR 2 /* Stream co-processor out. */
+#define STRCOP_RX_DMA_NBR 3 /* Stream co-processor in. */
+
+#define dma_eth0 dma_eth
+#define dma_eth1 dma_eth
+
enum dma_owner {
dma_eth,
dma_ser0,
diff --git a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
index 2f23e5e16f4..2d52bcc96ed 100644
--- a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
+++ b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
@@ -1,9 +1,19 @@
+#ifndef STARTUP_INC_INCLUDED
+#define STARTUP_INC_INCLUDED
+
#include <hwregs/asm/reg_map_asm.h>
#include <hwregs/asm/gio_defs_asm.h>
#include <hwregs/asm/pio_defs_asm.h>
#include <hwregs/asm/clkgen_defs_asm.h>
#include <hwregs/asm/pinmux_defs_asm.h>
+ .macro GIO_SET_P BITS, OUTREG
+ bmi 1f ; btstq: bit -> N flag
+ nop
+ or.d \BITS, \OUTREG
+1:
+ .endm
+
.macro GIO_INIT
move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
@@ -32,10 +42,23 @@
move.d 0xFFFFFFFF, $r0
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1
move.d $r0, [$r1]
- move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
- move.d $r0, [$r1]
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1
move.d $r0, [$r1]
+
+ ;; If eth_mdio, eth, geth bits are set in hwprot, don't
+ ;; set them to gpio, as this means they have been configured
+ ;; earlier and shouldn't be changed.
+ move.d 0xFC000000, $r2 ; pins 25..0 are eth_mdio, eth, geth
+ move.d REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1
+ move.d [$r1], $r0
+ btstq REG_BIT(pinmux, rw_hwprot, eth), $r0
+ GIO_SET_P 0x00FFFF00, $r2 ;; pins 8..23 are eth
+ btstq REG_BIT(pinmux, rw_hwprot, eth_mdio), $r0
+ GIO_SET_P 0x03000000, $r2 ;; pins 24..25 are eth_mdio
+ btstq REG_BIT(pinmux, rw_hwprot, geth), $r0
+ GIO_SET_P 0x000000FF, $r2 ;; pins 0..7 are geth
+ move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
+ move.d $r2, [$r1]
.endm
.macro START_CLOCKS
@@ -58,3 +81,4 @@
move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1
move.d $r1, [$r0]
.endm
+#endif
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/dma.h b/arch/cris/include/arch-v32/mach-fs/mach/dma.h
new file mode 100644
index 00000000000..a8c59292586
--- /dev/null
+++ b/arch/cris/include/arch-v32/mach-fs/mach/dma.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_ARCH_CRIS_DMA_H
+#define _ASM_ARCH_CRIS_DMA_H
+
+/* Defines for using and allocating dma channels. */
+
+#define MAX_DMA_CHANNELS 10
+
+#define NETWORK_ETH0_TX_DMA_NBR 0 /* Ethernet 0 out. */
+#define NETWORK_ETH0 RX_DMA_NBR 1 /* Ethernet 0 in. */
+
+#define IO_PROC_DMA0_TX_DMA_NBR 2 /* IO processor DMA0 out. */
+#define IO_PROC_DMA0_RX_DMA_NBR 3 /* IO processor DMA0 in. */
+
+#define ATA_TX_DMA_NBR 2 /* ATA interface out. */
+#define ATA_RX_DMA_NBR 3 /* ATA interface in. */
+
+#define ASYNC_SER2_TX_DMA_NBR 2 /* Asynchronous serial port 2 out. */
+#define ASYNC_SER2_RX_DMA_NBR 3 /* Asynchronous serial port 2 in. */
+
+#define IO_PROC_DMA1_TX_DMA_NBR 4 /* IO processor DMA1 out. */
+#define IO_PROC_DMA1_RX_DMA_NBR 5 /* IO processor DMA1 in. */
+
+#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */
+#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */
+
+#define SYNC_SER0_TX_DMA_NBR 4 /* Synchronous serial port 0 out. */
+#define SYNC_SER0_RX_DMA_NBR 5 /* Synchronous serial port 0 in. */
+
+#define EXTDMA0_TX_DMA_NBR 6 /* External DMA 0 out. */
+#define EXTDMA1_RX_DMA_NBR 7 /* External DMA 1 in. */
+
+#define ASYNC_SER0_TX_DMA_NBR 6 /* Asynchronous serial port 0 out. */
+#define ASYNC_SER0_RX_DMA_NBR 7 /* Asynchronous serial port 0 in. */
+
+#define SYNC_SER1_TX_DMA_NBR 6 /* Synchronous serial port 1 out. */
+#define SYNC_SER1_RX_DMA_NBR 7 /* Synchronous serial port 1 in. */
+
+#define NETWORK_ETH1_TX_DMA_NBR 6 /* Ethernet 1 out. */
+#define NETWORK_ETH1_RX_DMA_NBR 7 /* Ethernet 1 in. */
+
+#define EXTDMA2_TX_DMA_NBR 8 /* External DMA 2 out. */
+#define EXTDMA3_RX_DMA_NBR 9 /* External DMA 3 in. */
+
+#define STRCOP_TX_DMA_NBR 8 /* Stream co-processor out. */
+#define STRCOP_RX_DMA_NBR 9 /* Stream co-processor in. */
+
+#define ASYNC_SER3_TX_DMA_NBR 8 /* Asynchronous serial port 3 out. */
+#define ASYNC_SER3_RX_DMA_NBR 9 /* Asynchronous serial port 3 in. */
+
+enum dma_owner {
+ dma_eth0,
+ dma_eth1,
+ dma_iop0,
+ dma_iop1,
+ dma_ser0,
+ dma_ser1,
+ dma_ser2,
+ dma_ser3,
+ dma_sser0,
+ dma_sser1,
+ dma_ata,
+ dma_strp,
+ dma_ext0,
+ dma_ext1,
+ dma_ext2,
+ dma_ext3
+};
+
+int crisv32_request_dma(unsigned int dmanr, const char *device_id,
+ unsigned options, unsigned bandwidth,
+ enum dma_owner owner);
+void crisv32_free_dma(unsigned int dmanr);
+
+/* Masks used by crisv32_request_dma options: */
+#define DMA_VERBOSE_ON_ERROR 1
+#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
+#define DMA_INT_MEM 4
+
+#endif /* _ASM_ARCH_CRIS_DMA_H */
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/memmap.h b/arch/cris/include/arch-v32/mach-fs/mach/memmap.h
new file mode 100644
index 00000000000..d29df5644d3
--- /dev/null
+++ b/arch/cris/include/arch-v32/mach-fs/mach/memmap.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_ARCH_MEMMAP_H
+#define _ASM_ARCH_MEMMAP_H
+
+#define MEM_CSE0_START (0x00000000)
+#define MEM_CSE0_SIZE (0x04000000)
+#define MEM_CSE1_START (0x04000000)
+#define MEM_CSE1_SIZE (0x04000000)
+#define MEM_CSR0_START (0x08000000)
+#define MEM_CSR1_START (0x0c000000)
+#define MEM_CSP0_START (0x10000000)
+#define MEM_CSP1_START (0x14000000)
+#define MEM_CSP2_START (0x18000000)
+#define MEM_CSP3_START (0x1c000000)
+#define MEM_CSP4_START (0x20000000)
+#define MEM_CSP5_START (0x24000000)
+#define MEM_CSP6_START (0x28000000)
+#define MEM_CSP7_START (0x2c000000)
+#define MEM_INTMEM_START (0x38000000)
+#define MEM_INTMEM_SIZE (0x00020000)
+#define MEM_DRAM_START (0x40000000)
+
+#define MEM_NON_CACHEABLE (0x80000000)
+
+#endif
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
index 4a10ccbd6cc..dd1abbdcbc7 100644
--- a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
+++ b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
@@ -1,3 +1,6 @@
+#ifndef STARTUP_INC_INCLUDED
+#define STARTUP_INC_INCLUDED
+
#include <hwregs/asm/reg_map_asm.h>
#include <hwregs/asm/bif_core_defs_asm.h>
#include <hwregs/asm/gio_defs_asm.h>
@@ -75,3 +78,5 @@
move.d $r10, [$r11]
#endif
.endm
+
+#endif
diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h
index 38f1c8e1770..d474818a537 100644
--- a/arch/cris/include/asm/etraxgpio.h
+++ b/arch/cris/include/asm/etraxgpio.h
@@ -21,31 +21,35 @@
* /dev/leds minor 2, Access to leds depending on kernelconfig
*
* For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
- * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction
- * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction
- * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction
- * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction
+ * /dev/gpioa minor 0, 32 bit GPIO, each bit can change direction
+ * /dev/gpiob minor 1, 32 bit GPIO, each bit can change direction
+ * /dev/gpioc minor 3, 16 bit GPIO, each bit can change direction
+ * /dev/gpiod minor 4, 32 bit GPIO, input only
* /dev/leds minor 2, Access to leds depending on kernelconfig
* /dev/pwm0 minor 16, PWM channel 0 on PA30
* /dev/pwm1 minor 17, PWM channel 1 on PA31
* /dev/pwm2 minor 18, PWM channel 2 on PB26
+ * /dev/ppwm minor 19, PPWM channel
*
*/
#ifndef _ASM_ETRAXGPIO_H
#define _ASM_ETRAXGPIO_H
+#define GPIO_MINOR_FIRST 0
+
+#define ETRAXGPIO_IOCTYPE 43
+
/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
#ifdef CONFIG_ETRAX_ARCH_V10
-#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_G 3
#define GPIO_MINOR_LAST 3
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif
#ifdef CONFIG_ETRAXFS
-#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
@@ -58,10 +62,10 @@
#else
#define GPIO_MINOR_LAST 5
#endif
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif
#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2
@@ -73,12 +77,17 @@
#else
#define GPIO_MINOR_LAST 4
#endif
-#define GPIO_MINOR_PWM0 16
-#define GPIO_MINOR_PWM1 17
-#define GPIO_MINOR_PWM2 18
-#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2
+#define GPIO_MINOR_FIRST_PWM 16
+#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
+#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
+#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
+#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
+#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
#endif
+
+
/* supported ioctl _IOC_NR's */
#define IO_READBITS 0x1 /* read and return current port bits (obsolete) */
@@ -125,12 +134,10 @@
*/
#define IO_READ_INBITS 0x10 /* *arg is result of reading the input pins */
#define IO_READ_OUTBITS 0x11 /* *arg is result of reading the output shadow */
-#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
-#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
+#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input, */
+ /* *arg updated with current input pins. */
+#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
+ /* *arg updated with current output pins. */
/* The following ioctl's are applicable to the PWM channels only */
@@ -140,7 +147,8 @@ enum io_pwm_mode {
PWM_OFF = 0, /* disabled, deallocated */
PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */
PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */
- PWM_VARFREQ = 3 /* individually configurable high/low periods */
+ PWM_VARFREQ = 3, /* individually configurable high/low periods */
+ PWM_SOFT = 4 /* software generated */
};
struct io_pwm_set_mode {
@@ -176,4 +184,56 @@ struct io_pwm_set_duty {
int duty; /* 0..255 */
};
+/* Returns information about the latest PWM pulse.
+ * lo: Length of the latest low period, in units of 10ns.
+ * hi: Length of the latest high period, in units of 10ns.
+ * cnt: Time since last detected edge, in units of 10ns.
+ *
+ * The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
+ *
+ * NOTE: All PWM devices is connected to the same input source.
+ */
+#define IO_PWM_GET_PERIOD 0x23
+
+struct io_pwm_get_period {
+ unsigned int lo;
+ unsigned int hi;
+ unsigned int cnt;
+};
+
+/* Sets the input source for the PWM input. For the src value see the
+ * register description for gio:rw_pwm_in_cfg.
+ *
+ * NOTE: All PWM devices is connected to the same input source.
+ */
+#define IO_PWM_SET_INPUT_SRC 0x24
+struct io_pwm_set_input_src {
+ unsigned int src; /* 0..7 */
+};
+
+/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
+#define IO_PPWM_SET_DUTY 0x25
+
+struct io_ppwm_set_duty {
+ int duty; /* 0..255 */
+};
+
+/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
+ * PWM capable gpio pins:
+ */
+#define IO_PWMCLK_SETGET_CONFIG 0x26
+struct gpio_pwmclk_conf {
+ unsigned int gpiopin; /* The pin number based on the opened device */
+ unsigned int baseclk; /* The base clock to use, or sw will select one close*/
+ unsigned int low; /* The number of low periods of the baseclk */
+ unsigned int high; /* The number of high periods of the baseclk */
+};
+
+/* Examples:
+ * To get a symmetric 12 MHz clock without knowing anything about the hardware:
+ * baseclk = 12000000, low = 0, high = 0
+ * To just get info of current setting:
+ * baseclk = 0, low = 0, high = 0, the values will be updated by driver.
+ */
+
#endif
diff --git a/arch/cris/include/asm/sync_serial.h b/arch/cris/include/asm/sync_serial.h
index d87c24df2b3..7f827fea30e 100644
--- a/arch/cris/include/asm/sync_serial.h
+++ b/arch/cris/include/asm/sync_serial.h
@@ -19,6 +19,7 @@
#define SSP_OPOLARITY _IOR('S', 4, unsigned int)
#define SSP_SPI _IOR('S', 5, unsigned int)
#define SSP_INBUFCHUNK _IOR('S', 6, unsigned int)
+#define SSP_INPUT _IOR('S', 7, unsigned int)
/* Values for SSP_SPEED */
#define SSP150 0
@@ -37,6 +38,7 @@
#define SSP921600 13
#define SSP3125000 14
#define CODEC 15
+#define CODEC_f32768 16
#define FREQ_4MHz 0
#define FREQ_2MHz 1
@@ -46,9 +48,14 @@
#define FREQ_128kHz 5
#define FREQ_64kHz 6
#define FREQ_32kHz 7
+/* FREQ_* with values where bit (value & 0x10) is set are */
+/* used for CODEC_f32768 */
+#define FREQ_4096kHz 16 /* CODEC_f32768 */
/* Used by application to set CODEC divider, word rate and frame rate */
-#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) (CODEC | (freq << 8) | (clk_per_sync << 16) | (sync_per_frame << 28))
+#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) \
+ ((CODEC + ((freq & 0x10) >> 4)) | (freq << 8) | \
+ (clk_per_sync << 16) | (sync_per_frame << 28))
/* Used by driver to extract speed */
#define GET_SPEED(x) (x & 0xff)
@@ -68,6 +75,7 @@
#define NORMAL_SYNC 1
#define EARLY_SYNC 2
#define SECOND_WORD_SYNC 0x40000
+#define LATE_SYNC 0x80000
#define BIT_SYNC 4
#define WORD_SYNC 8
@@ -104,4 +112,21 @@
/* Values for SSP_INBUFCHUNK */
/* plain integer with the size of DMA chunks */
+/* To ensure that the timestamps are aligned with the data being read
+ * the read length MUST be a multiple of the length of the DMA buffers.
+ *
+ * Use a multiple of SSP_INPUT_CHUNK_SIZE defined below.
+ */
+#define SSP_INPUT_CHUNK_SIZE 256
+
+/* Request struct to pass through the ioctl interface to read
+ * data with timestamps.
+ */
+struct ssp_request {
+ char __user *buf; /* Where to put the data. */
+ size_t len; /* Size of buf. MUST be a multiple of */
+ /* SSP_INPUT_CHUNK_SIZE! */
+ struct timespec ts; /* The time the data was sampled. */
+};
+
#endif
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index b917549a7d9..195ec5fa0dd 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -9,12 +9,11 @@
#define SAMPLE_BUFFER_SIZE 8192
-static char* sample_buffer;
-static char* sample_buffer_pos;
+static char *sample_buffer;
+static char *sample_buffer_pos;
static int prof_running = 0;
-void
-cris_profile_sample(struct pt_regs* regs)
+void cris_profile_sample(struct pt_regs *regs)
{
if (!prof_running)
return;
@@ -24,7 +23,7 @@ cris_profile_sample(struct pt_regs* regs)
else
*(unsigned int*)sample_buffer_pos = 0;
- *(unsigned int*)(sample_buffer_pos + 4) = instruction_pointer(regs);
+ *(unsigned int *)(sample_buffer_pos + 4) = instruction_pointer(regs);
sample_buffer_pos += 8;
if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE)
@@ -54,6 +53,7 @@ write_cris_profile(struct file *file, const char __user *buf,
{
sample_buffer_pos = sample_buffer;
memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE);
+ return count < SAMPLE_BUFFER_SIZE ? count : SAMPLE_BUFFER_SIZE;
}
static const struct file_operations cris_proc_profile_operations = {
@@ -61,8 +61,7 @@ static const struct file_operations cris_proc_profile_operations = {
.write = write_cris_profile,
};
-static int
-__init init_cris_profile(void)
+static int __init init_cris_profile(void)
{
struct proc_dir_entry *entry;
@@ -82,5 +81,5 @@ __init init_cris_profile(void)
return 0;
}
-
__initcall(init_cris_profile);
+
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index c72730d20ef..b5096430ce1 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -39,13 +39,16 @@ int have_rtc; /* used to remember if we have an RTC or not */;
extern unsigned long loops_per_jiffy; /* init/main.c */
unsigned long loops_per_usec;
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
extern unsigned long do_slow_gettimeoffset(void);
static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
u32 arch_gettimeoffset(void)
{
- return do_gettimeoffset() * 1000;
+ return do_gettimeoffset() * 1000;
}
+#endif
/*
* BUG: This routine does not handle hour overflow properly; it just
@@ -151,7 +154,7 @@ cris_do_profile(struct pt_regs* regs)
unsigned long long sched_clock(void)
{
- return (unsigned long long)jiffies * (1000000000 / HZ) +
+ return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ) +
get_ns_in_jiffie();
}
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index d49d17d2a14..442218980db 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -58,6 +58,8 @@ SECTIONS
___data_start = . ;
__Sdata = . ;
.data : { /* Data */
+ CACHELINE_ALIGNED_DATA(32)
+ READ_MOSTLY_DATA(32)
DATA_DATA
}
__edata = . ; /* End of data section. */
@@ -84,6 +86,16 @@ SECTIONS
}
SECURITY_INIT
+ /* .exit.text is discarded at runtime, not link time,
+ * to deal with references from __bug_table
+ */
+ .exit.text : {
+ EXIT_TEXT
+ }
+ .exit.data : {
+ EXIT_DATA
+ }
+
#ifdef CONFIG_ETRAX_ARCH_V10
#ifdef CONFIG_BLK_DEV_INITRD
.init.ramfs : {
@@ -112,7 +124,7 @@ SECTIONS
__init_end = .;
__data_end = . ; /* Move to _edata ? */
- BSS_SECTION(0, 0, 0)
+ BSS_SECTION(1, 1, 1)
. = ALIGN (0x20);
_end = .;
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 380df1a73a6..9dcac8ec8fa 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -1,19 +1,18 @@
/*
- * linux/arch/cris/mm/fault.c
- *
- * Copyright (C) 2000-2006 Axis Communications AB
- *
- * Authors: Bjorn Wesen
+ * arch/cris/mm/fault.c
*
+ * Copyright (C) 2000-2010 Axis Communications AB
*/
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/wait.h>
#include <asm/uaccess.h>
extern int find_fixup_code(struct pt_regs *);
extern void die_if_kernel(const char *, struct pt_regs *, long);
+extern void show_registers(struct pt_regs *regs);
/* debug of low-level TLB reload */
#undef DEBUG
@@ -108,11 +107,11 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
info.si_code = SEGV_MAPERR;
/*
- * If we're in an interrupt or have no user
- * context, we must not take the fault..
+ * If we're in an interrupt or "atomic" operation or have no
+ * user context, we must not take the fault.
*/
- if (in_interrupt() || !mm)
+ if (in_atomic() || !mm)
goto no_context;
down_read(&mm->mmap_sem);
@@ -193,14 +192,25 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
+ printk(KERN_NOTICE "%s (pid %d) segfaults for page "
+ "address %08lx at pc %08lx\n",
+ tsk->comm, tsk->pid,
+ address, instruction_pointer(regs));
+
+ /* With DPG on, we've already dumped registers above. */
+ DPG(if (0))
+ show_registers(regs);
+
+#ifdef CONFIG_NO_SEGFAULT_TERMINATION
+ DECLARE_WAIT_QUEUE_HEAD(wq);
+ wait_event_interruptible(wq, 0 == 1);
+#else
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
info.si_addr = (void *)address;
force_sig_info(SIGSEGV, &info, tsk);
- printk(KERN_NOTICE "%s (pid %d) segfaults for page "
- "address %08lx at pc %08lx\n",
- tsk->comm, tsk->pid, address, instruction_pointer(regs));
+#endif
return;
}
@@ -245,10 +255,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
out_of_memory:
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", tsk->comm);
- if (user_mode(regs))
- do_exit(SIGKILL);
- goto no_context;
+ if (!user_mode(regs))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
@@ -334,8 +344,11 @@ int
find_fixup_code(struct pt_regs *regs)
{
const struct exception_table_entry *fixup;
+ /* in case of delay slot fault (v32) */
+ unsigned long ip = (instruction_pointer(regs) & ~0x1);
- if ((fixup = search_exception_tables(instruction_pointer(regs))) != 0) {
+ fixup = search_exception_tables(ip);
+ if (fixup != 0) {
/* Adjust the instruction pointer in the stackframe. */
instruction_pointer(regs) = fixup->fixup;
arch_fixup(regs);