aboutsummaryrefslogtreecommitdiff
path: root/arch/cris/arch-v10
diff options
context:
space:
mode:
authorJesper Nilsson <jesper.nilsson@axis.com>2010-08-02 13:46:12 +0200
committerJesper Nilsson <jesper.nilsson@axis.com>2010-08-04 12:59:28 +0200
commit0e0aff21261aba52ee37b59fcf48202230fc7377 (patch)
treee607886797a051337309a221e6ab92d52b1eb5c1 /arch/cris/arch-v10
parent60362158e2419b20cc04d43a6ffa60c1845775dc (diff)
CRIS: v10: remove all BKL usage
We don't need to take the BKL here. Also fixes compile error after last commit (smp_lock.h was not included) Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Diffstat (limited to 'arch/cris/arch-v10')
-rw-r--r--arch/cris/arch-v10/drivers/i2c.c39
1 files changed, 13 insertions, 26 deletions
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index 54e2e1adf08..77a94181381 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -59,8 +59,8 @@ static const char i2c_name[] = "i2c";
#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
-#define i2c_enable()
-#define i2c_disable()
+#define i2c_enable()
+#define i2c_disable()
/* enable or disable output-enable, to select output or input on the i2c bus */
@@ -90,7 +90,7 @@ static const char i2c_name[] = "i2c";
#define i2c_dir_out() \
*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
- REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
+ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
#define i2c_dir_in() \
*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
@@ -188,7 +188,7 @@ i2c_outbyte(unsigned char x)
} else {
i2c_data(I2C_DATA_LOW);
}
-
+
i2c_delay(CLOCK_LOW_TIME/2);
i2c_clk(I2C_CLOCK_HIGH);
i2c_delay(CLOCK_HIGH_TIME);
@@ -415,7 +415,7 @@ i2c_sendnack(void)
*#
*#--------------------------------------------------------------------------*/
int
-i2c_writereg(unsigned char theSlave, unsigned char theReg,
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
unsigned char theValue)
{
int error, cntr = 3;
@@ -467,7 +467,7 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
* enable interrupt again
*/
local_irq_restore(flags);
-
+
} while(error && cntr--);
i2c_delay(CLOCK_LOW_TIME);
@@ -503,7 +503,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
* generate start condition
*/
i2c_start();
-
+
/*
* send slave address
*/
@@ -554,7 +554,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
* enable interrupt again
*/
local_irq_restore(flags);
-
+
} while(error && cntr--);
spin_unlock(&i2c_lock);
@@ -577,8 +577,7 @@ i2c_release(struct inode *inode, struct file *filp)
/* Main device API. ioctl's to write or read to/from i2c registers.
*/
-static int
-i2c_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -EINVAL;
@@ -587,7 +586,7 @@ i2c_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
switch (_IOC_NR(cmd)) {
case I2C_WRITEREG:
/* write to an i2c slave */
- D(printk("i2cw %d %d %d\n",
+ D(printk(KERN_DEBUG "i2cw %d %d %d\n",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
@@ -599,32 +598,20 @@ i2c_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned char val;
/* read from an i2c slave */
- D(printk("i2cr %d %d ",
+ D(printk(KERN_DEBUG "i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
- D(printk("= %d\n", val));
+ D(printk(KERN_DEBUG "= %d\n", val));
return val;
- }
+ }
default:
return -EINVAL;
}
-
return 0;
}
-static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- lock_kernel();
- ret = i2c_ioctl_unlocked(file, cmd, arg);
- unlock_kernel();
-
- return ret;
-}
-
static const struct file_operations i2c_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = i2c_ioctl,