USB:Enable GPIO configuration at connectlinaro-11.07-2.6.38

GPIO alternate configuration is set when the USB is
connected and reset at USB disconnect.

Change-Id: I07d9c2ed5028879ecff309aa9e4ac25deac148f5
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27203
Reviewed-by: QATOOLS
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>

4 files changed, 58 insertions, 0 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-usb.h b/arch/arm/mach-ux500/board-mop500-usb.h
new file mode 100644
index 00000000000..85288463a73
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-usb.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Saketh Ram Bommisetti <sakethram.bommisetti@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __BOARD_MOP500_USB_H
+#define __BOARD_MOP500_USB_H
+
+extern struct ab8500_usbgpio_platform_data ab8500_usbgpio_plat_data;
+
+#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index be1730bd765..62418a4c444 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -60,6 +60,7 @@
 #include "board-mop500-regulators.h"
 #include "board-mop500-bm.h"
 #include "board-mop500-wlan.h"
+#include "board-mop500-usb.h"
 #include "pins.h"
 
 #ifdef CONFIG_AB8500_DENC
@@ -258,6 +259,7 @@ static struct ab8500_platform_data ab8500_platdata = {
 	.fg		= &ab8500_fg_plat_data,
 	.chargalg	= &ab8500_chargalg_plat_data,
 	.gpio		= &ab8500_gpio_pdata,
+	.usb		= &ab8500_usbgpio_plat_data,
 #ifdef CONFIG_INPUT_AB8500_ACCDET
 	.accdet = &ab8500_accdet_pdata,
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d41881..5c27a72c10d 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -22,4 +22,12 @@ struct ux500_musb_board_data {
 
 void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
 	int *dma_tx_cfg);
+
+struct ab8500_usbgpio_platform_data {
+	int (*get)(struct device *device);
+	void (*enable)(void);
+	void (*disable)(void);
+	void (*put)(void);
+};
+
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 82e535953fd..dc6a6970c35 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -9,6 +9,9 @@
 #include <plat/ste_dma40.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
+#include <plat/pincfg.h>
+#include "pins.h"
+#include "board-mop500-usb.h"
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
@@ -85,6 +88,7 @@ static struct ux500_musb_board_data musb_board_data = {
 };
 
 static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
+static struct ux500_pins *usb_gpio_pins;
 
 static struct musb_hdrc_config musb_hdrc_config = {
 	.multipoint	= true,
@@ -129,6 +133,37 @@ struct platform_device ux500_musb_device = {
 	.resource = usb_resources,
 };
 
+static void enable_gpio(void)
+{
+	ux500_pins_enable(usb_gpio_pins);
+}
+static void disable_gpio(void)
+{
+	ux500_pins_disable(usb_gpio_pins);
+}
+static int get_gpio(struct device *device)
+{
+	usb_gpio_pins = ux500_pins_get(dev_name(device));
+
+	if (usb_gpio_pins == NULL) {
+		dev_err(device, "Could not get %s:usb_gpio_pins structure\n",
+				dev_name(device));
+
+		return PTR_ERR(usb_gpio_pins);
+	}
+	return 0;
+}
+static void put_gpio(void)
+{
+	ux500_pins_put(usb_gpio_pins);
+}
+struct ab8500_usbgpio_platform_data ab8500_usbgpio_plat_data = {
+	.get		= &get_gpio,
+	.enable		= &enable_gpio,
+	.disable	= &disable_gpio,
+	.put		= &put_gpio,
+};
+
 static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
 {
 	u32 idx;