aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/pxa3xx.c
diff options
context:
space:
mode:
authoreric miao <eric.miao@marvell.com>2008-01-28 23:00:02 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-02-04 13:17:33 +0000
commitc4d1fb627ff307256d792280efcb09e1235affea (patch)
tree260ed71dd94883353de1e9256d3d7337d0a7b81a /arch/arm/mach-pxa/pxa3xx.c
parent16dfdbf038706c12c56f327d14c6b901edc376a3 (diff)
[ARM] pxa: add preliminary suspend/resume code for pxa3xx
1. clear RDH bit after resuming back from D3, otherwise, the multi function pins will retain the low power state 2. save/restore essential system registers Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-pxa/pxa3xx.c')
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c73
1 files changed, 59 insertions, 14 deletions
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index d0b2afd4368..e47e67c11af 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -40,6 +40,7 @@
#define RO_CLK 60000000
#define ACCR_D0CS (1 << 26)
+#define ACCR_PCCE (1 << 11)
/* crystal frequency to static memory controller multiplier (SMCFS) */
static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
@@ -204,7 +205,6 @@ static struct clk pxa3xx_clks[] = {
};
#ifdef CONFIG_PM
-#define SLEEP_SAVE_SIZE 4
#define ISRAM_START 0x5c000000
#define ISRAM_SIZE SZ_256K
@@ -212,25 +212,29 @@ static struct clk pxa3xx_clks[] = {
static void __iomem *sram;
static unsigned long wakeup_src;
-static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
-{
- pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB);
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
- if (CKENA & (1 << CKEN_USBH)) {
- printk(KERN_ERR "PM: USB host clock not stopped?\n");
- CKENA &= ~(1 << CKEN_USBH);
- }
-// CKENA |= 1 << (CKEN_ISC & 31);
+enum { SLEEP_SAVE_START = 0,
+ SLEEP_SAVE_CKENA,
+ SLEEP_SAVE_CKENB,
+ SLEEP_SAVE_ACCR,
- /*
- * Low power modes require the HSIO2 clock to be enabled.
- */
- CKENB |= 1 << (CKEN_HSIO2 & 31);
+ SLEEP_SAVE_SIZE,
+};
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+ SAVE(CKENA);
+ SAVE(CKENB);
+ SAVE(ACCR);
}
static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
{
- CKENB &= ~(1 << (CKEN_HSIO2 & 31));
+ RESTORE(ACCR);
+ RESTORE(CKENA);
+ RESTORE(CKENB);
}
/*
@@ -266,6 +270,46 @@ static void pxa3xx_cpu_standby(unsigned int pwrmode)
printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
}
+/*
+ * NOTE: currently, the OBM (OEM Boot Module) binary comes along with
+ * PXA3xx development kits assumes that the resuming process continues
+ * with the address stored within the first 4 bytes of SDRAM. The PSPR
+ * register is used privately by BootROM and OBM, and _must_ be set to
+ * 0x5c014000 for the moment.
+ */
+static void pxa3xx_cpu_pm_suspend(void)
+{
+ volatile unsigned long *p = (volatile void *)0xc0000000;
+ unsigned long saved_data = *p;
+
+ extern void pxa3xx_cpu_suspend(void);
+ extern void pxa3xx_cpu_resume(void);
+
+ /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
+ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
+ CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
+
+ /* clear and setup wakeup source */
+ AD3SR = ~0;
+ AD3ER = wakeup_src;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ PCFR |= (1u << 13); /* L1_DIS */
+ PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */
+
+ PSPR = 0x5c014000;
+
+ /* overwrite with the resume address */
+ *p = virt_to_phys(pxa3xx_cpu_resume);
+
+ pxa3xx_cpu_suspend();
+
+ *p = saved_data;
+
+ AD3ER = 0;
+}
+
static void pxa3xx_cpu_pm_enter(suspend_state_t state)
{
/*
@@ -280,6 +324,7 @@ static void pxa3xx_cpu_pm_enter(suspend_state_t state)
break;
case PM_SUSPEND_MEM:
+ pxa3xx_cpu_pm_suspend();
break;
}
}