Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...

1 files changed, 197 insertions, 21 deletions

diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 427b7b8b123..324009edbd5 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -12,36 +12,217 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
-static void __init omap_zoom2_init_irq(void)
+/* Zoom2 has Qwerty keyboard*/
+static int zoom2_twl4030_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(1, 0, KEY_R),
+	KEY(2, 0, KEY_T),
+	KEY(3, 0, KEY_HOME),
+	KEY(6, 0, KEY_I),
+	KEY(7, 0, KEY_LEFTSHIFT),
+	KEY(0, 1, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(2, 1, KEY_G),
+	KEY(3, 1, KEY_SEND),
+	KEY(6, 1, KEY_K),
+	KEY(7, 1, KEY_ENTER),
+	KEY(0, 2, KEY_X),
+	KEY(1, 2, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(3, 2, KEY_END),
+	KEY(6, 2, KEY_DOT),
+	KEY(7, 2, KEY_CAPSLOCK),
+	KEY(0, 3, KEY_Z),
+	KEY(1, 3, KEY_KPPLUS),
+	KEY(2, 3, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(6, 3, KEY_O),
+	KEY(7, 3, KEY_SPACE),
+	KEY(0, 4, KEY_W),
+	KEY(1, 4, KEY_Y),
+	KEY(2, 4, KEY_U),
+	KEY(3, 4, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(6, 4, KEY_L),
+	KEY(7, 4, KEY_LEFT),
+	KEY(0, 5, KEY_S),
+	KEY(1, 5, KEY_H),
+	KEY(2, 5, KEY_J),
+	KEY(3, 5, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(6, 5, KEY_M),
+	KEY(4, 5, KEY_ENTER),
+	KEY(7, 5, KEY_RIGHT),
+	KEY(0, 6, KEY_Q),
+	KEY(1, 6, KEY_A),
+	KEY(2, 6, KEY_N),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(7, 6, KEY_UP),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 7, KEY_DOWN),
+	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
+	0
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= zoom2_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
 {
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom2_vmmc1_supply.dev = mmc[0].dev;
+	zoom2_vsim_supply.dev = mmc[0].dev;
+	zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
 }
 
-static struct omap_uart_config zoom2_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
 };
 
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&zoom2_uart_config },
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+	.battery_tmp_tbl	= zoom2_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
 };
 
+static struct twl4030_usb_data zoom2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+	.irq_line	= 1,
 };
 
 static struct twl4030_platform_data zoom2_twldata = {
@@ -49,7 +230,15 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.bci		= &zoom2_bci_data,
+	.madc		= &zoom2_madc_data,
+	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
+	.keypad		= &zoom2_kp_twl4030_data,
+	.vmmc1          = &zoom2_vmmc1,
+	.vmmc2          = &zoom2_vmmc2,
+	.vsim           = &zoom2_vsim,
+
 };
 
 static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@@ -70,26 +259,13 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
 extern int __init omap_zoom2_debugboard_init(void);
 
 static void __init omap_zoom2_init(void)
 {
 	omap_i2c_init();
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
 }