aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-14 13:46:57 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-14 13:46:57 -0700
commit2625b10d8c37656cf410a464ed95942b3abbd1f6 (patch)
treef02fc44aaed07dceed2566b3fdf4dc64b786cb89
parent489f7ab6c18cdd64a2d444e056d60a0e722f4ad7 (diff)
parent7f72134c32eb64c77d1fb35123ba8bf815bf797c (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits) atmel-mci: add MCI2 register definitions atmel-mci: Integrate AT91 specific definition in header file tmio_mmc: allow compilation for ASIC3 mmc_block: do not DMA to stack sdhci: Print ADMA status and pointer on debug tmio_mmc: fix clock setup tmio_mmc: map SD control registers after enabling the MFD cell tmio_mmc: correct probe return value for num_resources != 3 tmio_mmc: don't use set_irq_type tmio_mmc: add bus_shift support MFD,mmc: tmio_mmc: make HCLK configurable mmc_spi: don't use EINVAL for possible transmission errors cb710: more cleanup for the DEBUG case. sdhci: platform driver for SDHCI mxcmmc: remove frequency workaround cb710: handle DEBUG define in Makefile cb710: add missing parenthesis cb710: fix printk format string mmc: Driver for CB710/720 memory card reader (MMC part) pxamci: add regulator support. ...
-rw-r--r--MAINTAINERS9
-rw-r--r--drivers/mfd/t7l66xb.c5
-rw-r--r--drivers/mfd/tc6387xb.c5
-rw-r--r--drivers/mfd/tc6393xb.c5
-rw-r--r--drivers/misc/Kconfig1
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/cb710/Kconfig25
-rw-r--r--drivers/misc/cb710/Makefile8
-rw-r--r--drivers/misc/cb710/core.c357
-rw-r--r--drivers/misc/cb710/debug.c119
-rw-r--r--drivers/misc/cb710/sgbuf2.c150
-rw-r--r--drivers/mmc/card/block.c16
-rw-r--r--drivers/mmc/core/core.c107
-rw-r--r--drivers/mmc/host/Kconfig28
-rw-r--r--drivers/mmc/host/Makefile5
-rw-r--r--drivers/mmc/host/atmel-mci-regs.h33
-rw-r--r--drivers/mmc/host/cb710-mmc.c804
-rw-r--r--drivers/mmc/host/cb710-mmc.h104
-rw-r--r--drivers/mmc/host/mmc_spi.c23
-rw-r--r--drivers/mmc/host/mxcmmc.c2
-rw-r--r--drivers/mmc/host/omap.c3
-rw-r--r--drivers/mmc/host/pxamci.c46
-rw-r--r--drivers/mmc/host/sdhci-pltfm.c168
-rw-r--r--drivers/mmc/host/sdhci.c58
-rw-r--r--drivers/mmc/host/sdhci.h2
-rw-r--r--drivers/mmc/host/tmio_mmc.c180
-rw-r--r--drivers/mmc/host/tmio_mmc.h77
-rw-r--r--include/linux/cb710.h231
-rw-r--r--include/linux/mfd/tmio.h7
-rw-r--r--include/linux/pci_ids.h1
30 files changed, 2377 insertions, 203 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e28c5c1660..a1fe87ad483 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2112,6 +2112,15 @@ W: http://sourceforge.net/projects/lpfcxxxx
S: Supported
F: drivers/scsi/lpfc/
+ENE CB710 FLASH CARD READER DRIVER
+P: Michał Mirosław
+M: mirq-linux@rere.qmqm.pl
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/misc/cb710/
+F: drivers/mmc/host/cb710-mmc.*
+F: include/linux/cb710.h
+
EPSON 1355 FRAMEBUFFER DRIVER
P: Christopher Hoover
M: ch@murgatroid.com
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index e9f4323dd2c..875f7a87573 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
/*--------------------------------------------------------------------------*/
+static const struct tmio_mmc_data t7166xb_mmc_data = {
+ .hclk = 24000000,
+};
+
static const struct resource t7l66xb_mmc_resources[] = {
{
.start = 0x800,
@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = {
.name = "tmio-mmc",
.enable = t7l66xb_mmc_enable,
.disable = t7l66xb_mmc_disable,
+ .driver_data = &t7166xb_mmc_data,
.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
.resources = t7l66xb_mmc_resources,
},
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 43222c12fec..c3993ac2054 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
/*--------------------------------------------------------------------------*/
+const static struct tmio_mmc_data tc6387xb_mmc_data = {
+ .hclk = 24000000,
+};
+
static struct resource tc6387xb_mmc_resources[] = {
{
.start = 0x800,
@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = {
.name = "tmio-mmc",
.enable = tc6387xb_mmc_enable,
.disable = tc6387xb_mmc_disable,
+ .driver_data = &tc6387xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
.resources = tc6387xb_mmc_resources,
},
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 77a12fc8045..9d2abb5d6e2 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
return 0;
}
+const static struct tmio_mmc_data tc6393xb_mmc_data = {
+ .hclk = 24000000,
+};
+
static struct resource __devinitdata tc6393xb_nand_resources[] = {
{
.start = 0x1000,
@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
},
[TC6393XB_CELL_MMC] = {
.name = "tmio-mmc",
+ .driver_data = &tc6393xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
.resources = tc6393xb_mmc_resources,
},
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6d1ac180f6e..68ab39d7cb3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -235,5 +235,6 @@ config ISL29003
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7871f05dcb9..36f733cd60e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/
+obj-y += cb710/
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
new file mode 100644
index 00000000000..22429b8b106
--- /dev/null
+++ b/drivers/misc/cb710/Kconfig
@@ -0,0 +1,25 @@
+config CB710_CORE
+ tristate "ENE CB710/720 Flash memory card reader support"
+ depends on PCI
+ help
+ This option enables support for PCI ENE CB710/720 Flash memory card
+ reader found in some laptops (ie. some versions of HP Compaq nx9500).
+
+ You will also have to select some flash card format drivers (MMC/SD,
+ MemoryStick).
+
+ This driver can also be built as a module. If so, the module
+ will be called cb710.
+
+config CB710_DEBUG
+ bool "Enable driver debugging"
+ depends on CB710_CORE != n
+ default n
+ help
+ This is an option for use by developers; most people should
+ say N here. This adds a lot of debugging output to dmesg.
+
+config CB710_DEBUG_ASSUMPTIONS
+ bool
+ depends on CB710_CORE != n
+ default y
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
new file mode 100644
index 00000000000..7b80cbf1a60
--- /dev/null
+++ b/drivers/misc/cb710/Makefile
@@ -0,0 +1,8 @@
+ifeq ($(CONFIG_CB710_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
+endif
+
+obj-$(CONFIG_CB710_CORE) += cb710.o
+
+cb710-y := core.o sgbuf2.o
+cb710-$(CONFIG_CB710_DEBUG) += debug.o
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
new file mode 100644
index 00000000000..b14eab0f2ba
--- /dev/null
+++ b/drivers/misc/cb710/core.c
@@ -0,0 +1,357 @@
+/*
+ * cb710/core.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/cb710.h>
+
+static DEFINE_IDA(cb710_ida);
+static DEFINE_SPINLOCK(cb710_ida_lock);
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+ int reg, uint32_t mask, uint32_t xor)
+{
+ u32 rval;
+
+ pci_read_config_dword(pdev, reg, &rval);
+ rval = (rval & mask) ^ xor;
+ pci_write_config_dword(pdev, reg, rval);
+}
+EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
+
+/* Some magic writes based on Windows driver init code */
+static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+{
+ unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+ u32 val;
+
+ cb710_pci_update_config_reg(pdev, 0x48,
+ ~0x000000FF, 0x0000003F);
+
+ pci_read_config_dword(pdev, 0x48, &val);
+ if (val & 0x80000000)
+ return 0;
+
+ if (!pdev0)
+ return -ENODEV;
+
+ if (pdev0->vendor == PCI_VENDOR_ID_ENE
+ && pdev0->device == PCI_DEVICE_ID_ENE_720) {
+ cb710_pci_update_config_reg(pdev0, 0x8C,
+ ~0x00F00000, 0x00100000);
+ cb710_pci_update_config_reg(pdev0, 0xB0,
+ ~0x08000000, 0x08000000);
+ }
+
+ cb710_pci_update_config_reg(pdev0, 0x8C,
+ ~0x00000F00, 0x00000200);
+ cb710_pci_update_config_reg(pdev0, 0x90,
+ ~0x00060000, 0x00040000);
+
+ pci_dev_put(pdev0);
+
+ return 0;
+}
+
+static irqreturn_t cb710_irq_handler(int irq, void *data)
+{
+ struct cb710_chip *chip = data;
+ struct cb710_slot *slot = &chip->slot[0];
+ irqreturn_t handled = IRQ_NONE;
+ unsigned nr;
+
+ spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
+
+ for (nr = chip->slots; nr; ++slot, --nr) {
+ cb710_irq_handler_t handler_func = slot->irq_handler;
+ if (handler_func && handler_func(slot))
+ handled = IRQ_HANDLED;
+ }
+
+ spin_unlock(&chip->irq_lock);
+
+ return handled;
+}
+
+static void cb710_release_slot(struct device *dev)
+{
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+
+ /* slot struct can be freed now */
+ atomic_dec(&chip->slot_refs_count);
+#endif
+}
+
+static int __devinit cb710_register_slot(struct cb710_chip *chip,
+ unsigned slot_mask, unsigned io_offset, const char *name)
+{
+ int nr = chip->slots;
+ struct cb710_slot *slot = &chip->slot[nr];
+ int err;
+
+ dev_dbg(cb710_chip_dev(chip),
+ "register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
+ name, chip->platform_id, nr, slot_mask, io_offset);
+
+ /* slot->irq_handler == NULL here; this needs to be
+ * seen before platform_device_register() */
+ ++chip->slots;
+ smp_wmb();
+
+ slot->iobase = chip->iobase + io_offset;
+ slot->pdev.name = name;
+ slot->pdev.id = chip->platform_id;
+ slot->pdev.dev.parent = &chip->pdev->dev;
+ slot->pdev.dev.release = cb710_release_slot;
+
+ err = platform_device_register(&slot->pdev);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ atomic_inc(&chip->slot_refs_count);
+#endif
+
+ if (err) {
+ /* device_initialize() called from platform_device_register()
+ * wants this on error path */
+ platform_device_put(&slot->pdev);
+
+ /* slot->irq_handler == NULL here anyway, so no lock needed */
+ --chip->slots;
+ return err;
+ }
+
+ chip->slot_mask |= slot_mask;
+
+ return 0;
+}
+
+static void cb710_unregister_slot(struct cb710_chip *chip,
+ unsigned slot_mask)
+{
+ int nr = chip->slots - 1;
+
+ if (!(chip->slot_mask & slot_mask))
+ return;
+
+ platform_device_unregister(&chip->slot[nr].pdev);
+
+ /* complementary to spin_unlock() in cb710_set_irq_handler() */
+ smp_rmb();
+ BUG_ON(chip->slot[nr].irq_handler != NULL);
+
+ /* slot->irq_handler == NULL here, so no lock needed */
+ --chip->slots;
+ chip->slot_mask &= ~slot_mask;
+}
+
+void cb710_set_irq_handler(struct cb710_slot *slot,
+ cb710_irq_handler_t handler)
+{
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->irq_lock, flags);
+ slot->irq_handler = handler;
+ spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
+
+#ifdef CONFIG_PM
+
+static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct cb710_chip *chip = pci_get_drvdata(pdev);
+
+ free_irq(pdev->irq, chip);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ if (state.event & PM_EVENT_SLEEP)
+ pci_set_power_state(pdev, PCI_D3cold);
+ return 0;
+}
+
+static int cb710_resume(struct pci_dev *pdev)
+{
+ struct cb710_chip *chip = pci_get_drvdata(pdev);
+ int err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ return devm_request_irq(&pdev->dev, pdev->irq,
+ cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct cb710_chip *chip;
+ unsigned long flags;
+ u32 val;
+ int err;
+ int n = 0;
+
+ err = cb710_pci_configure(pdev);
+ if (err)
+ return err;
+
+ /* this is actually magic... */
+ pci_read_config_dword(pdev, 0x48, &val);
+ if (!(val & 0x80000000)) {
+ pci_write_config_dword(pdev, 0x48, val|0x71000000);
+ pci_read_config_dword(pdev, 0x48, &val);
+ }
+
+ dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
+ if (!(val & 0x70000000))
+ return -ENODEV;
+ val = (val >> 28) & 7;
+ if (val & CB710_SLOT_MMC)
+ ++n;
+ if (val & CB710_SLOT_MS)
+ ++n;
+ if (val & CB710_SLOT_SM)
+ ++n;
+
+ chip = devm_kzalloc(&pdev->dev,
+ sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
+ if (err)
+ return err;
+
+ chip->pdev = pdev;
+ chip->iobase = pcim_iomap_table(pdev)[0];
+
+ pci_set_drvdata(pdev, chip);
+
+ err = devm_request_irq(&pdev->dev, pdev->irq,
+ cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+ if (err)
+ return err;
+
+ do {
+ if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock_irqsave(&cb710_ida_lock, flags);
+ err = ida_get_new(&cb710_ida, &chip->platform_id);
+ spin_unlock_irqrestore(&cb710_ida_lock, flags);
+
+ if (err && err != -EAGAIN)
+ return err;
+ } while (err);
+
+
+ dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
+ chip->platform_id, chip->iobase, pdev->irq);
+
+ if (val & CB710_SLOT_MMC) { /* MMC/SD slot */
+ err = cb710_register_slot(chip,
+ CB710_SLOT_MMC, 0x00, "cb710-mmc");
+ if (err)
+ return err;
+ }
+
+ if (val & CB710_SLOT_MS) { /* MemoryStick slot */
+ err = cb710_register_slot(chip,
+ CB710_SLOT_MS, 0x40, "cb710-ms");
+ if (err)
+ goto unreg_mmc;
+ }
+
+ if (val & CB710_SLOT_SM) { /* SmartMedia slot */
+ err = cb710_register_slot(chip,
+ CB710_SLOT_SM, 0x60, "cb710-sm");
+ if (err)
+ goto unreg_ms;
+ }
+
+ return 0;
+unreg_ms:
+ cb710_unregister_slot(chip, CB710_SLOT_MS);
+unreg_mmc:
+ cb710_unregister_slot(chip, CB710_SLOT_MMC);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+ return err;
+}
+
+static void __devexit cb710_remove_one(struct pci_dev *pdev)
+{
+ struct cb710_chip *chip = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ cb710_unregister_slot(chip, CB710_SLOT_SM);
+ cb710_unregister_slot(chip, CB710_SLOT_MS);
+ cb710_unregister_slot(chip, CB710_SLOT_MMC);
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+
+ spin_lock_irqsave(&cb710_ida_lock, flags);
+ ida_remove(&cb710_ida, chip->platform_id);
+ spin_unlock_irqrestore(&cb710_ida_lock, flags);
+}
+
+static const struct pci_device_id cb710_pci_tbl[] = {
+ { PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, }
+};
+
+static struct pci_driver cb710_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = cb710_pci_tbl,
+ .probe = cb710_probe,
+ .remove = __devexit_p(cb710_remove_one),
+#ifdef CONFIG_PM
+ .suspend = cb710_suspend,
+ .resume = cb710_resume,
+#endif
+};
+
+static int __init cb710_init_module(void)
+{
+ return pci_register_driver(&cb710_driver);
+}
+
+static void __exit cb710_cleanup_module(void)
+{
+ pci_unregister_driver(&cb710_driver);
+ ida_destroy(&cb710_ida);
+}
+
+module_init(cb710_init_module);
+module_exit(cb710_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c
new file mode 100644
index 00000000000..02358d086e0
--- /dev/null
+++ b/drivers/misc/cb710/debug.c
@@ -0,0 +1,119 @@
+/*
+ * cb710/debug.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cb710.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CB710_REG_COUNT 0x80
+
+static const u16 allow[CB710_REG_COUNT/16] = {
+ 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+ 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+};
+static const char *const prefix[ARRAY_SIZE(allow)] = {
+ "MMC", "MMC", "MMC", "MMC",
+ "MS?", "MS?", "SM?", "SM?"
+};
+
+static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
+{
+ unsigned mask = (1 << bits/8) - 1;
+ offset *= bits/8;
+ return ((allow[block] >> offset) & mask) == mask;
+}
+
+#define CB710_READ_REGS_TEMPLATE(t) \
+static void cb710_read_regs_##t(void __iomem *iobase, \
+ u##t *reg, unsigned select) \
+{ \
+ unsigned i, j; \
+ \
+ for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
+ if (!(select & (1 << i))) \
+ continue; \
+ \
+ for (j = 0; j < 0x10/(t/8); ++j) { \
+ if (!allow_reg_read(i, j, t)) \
+ continue; \
+ reg[j] = ioread##t(iobase \
+ + (i << 4) + (j * (t/8))); \
+ } \
+ } \
+}
+
+static const char cb710_regf_8[] = "%02X";
+static const char cb710_regf_16[] = "%04X";
+static const char cb710_regf_32[] = "%08X";
+static const char cb710_xes[] = "xxxxxxxx";
+
+#define CB710_DUMP_REGS_TEMPLATE(t) \
+static void cb710_dump_regs_##t(struct device *dev, \
+ const u##t *reg, unsigned select) \
+{ \
+ const char *const xp = &cb710_xes[8 - t/4]; \
+ const char *const format = cb710_regf_##t; \
+ \
+ char msg[100], *p; \
+ unsigned i, j; \
+ \
+ for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
+ if (!(select & (1 << i))) \
+ continue; \
+ p = msg; \
+ for (j = 0; j < 0x10/(t/8); ++j) { \
+ *p++ = ' '; \
+ if (j == 8/(t/8)) \
+ *p++ = ' '; \
+ if (allow_reg_read(i, j, t)) \
+ p += sprintf(p, format, reg[j]); \
+ else \
+ p += sprintf(p, "%s", xp); \
+ } \
+ dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \
+ } \
+}
+
+#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \
+static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \
+ unsigned select) \
+{ \
+ u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \
+ \
+ memset(&regs, 0, sizeof(regs)); \
+ cb710_read_regs_##t(chip->iobase, regs, select); \
+ cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \
+}
+
+#define CB710_REG_ACCESS_TEMPLATES(t) \
+ CB710_READ_REGS_TEMPLATE(t) \
+ CB710_DUMP_REGS_TEMPLATE(t) \
+ CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
+
+CB710_REG_ACCESS_TEMPLATES(8)
+CB710_REG_ACCESS_TEMPLATES(16)
+CB710_REG_ACCESS_TEMPLATES(32)
+
+void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
+{
+ if (!(select & CB710_DUMP_REGS_MASK))
+ select = CB710_DUMP_REGS_ALL;
+ if (!(select & CB710_DUMP_ACCESS_MASK))
+ select |= CB710_DUMP_ACCESS_8;
+
+ if (select & CB710_DUMP_ACCESS_32)
+ cb710_read_and_dump_regs_32(chip, select);
+ if (select & CB710_DUMP_ACCESS_16)
+ cb710_read_and_dump_regs_16(chip, select);
+ if (select & CB710_DUMP_ACCESS_8)
+ cb710_read_and_dump_regs_8(chip, select);
+}
+EXPORT_SYMBOL_GPL(cb710_dump_regs);
+
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
new file mode 100644
index 00000000000..d38a7acdb6e
--- /dev/null
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -0,0 +1,150 @@
+/*
+ * cb710/sgbuf2.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cb710.h>
+
+static bool sg_dwiter_next(struct sg_mapping_iter *miter)
+{
+ if (sg_miter_next(miter)) {
+ miter->consumed = 0;
+ return true;
+ } else
+ return false;
+}
+
+static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
+{
+ return miter->length == miter->consumed && !sg_dwiter_next(miter);
+}
+
+static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
+{
+ size_t len, left = 4;
+ uint32_t data;
+ void *addr = &data;
+
+ do {
+ len = min(miter->length - miter->consumed, left);
+ memcpy(addr, miter->addr + miter->consumed, len);
+ miter->consumed += len;
+ left -= len;
+ if (!left)
+ return data;
+ addr += len;
+ } while (sg_dwiter_next(miter));
+
+ memset(addr, 0, left);
+ return data;
+}
+
+static inline bool needs_unaligned_copy(const void *ptr)
+{
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ return false;
+#else
+ return ((ptr - NULL) & 3) != 0;
+#endif
+}
+
+static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
+{
+ size_t len;
+
+ if (sg_dwiter_is_at_end(miter))
+ return true;
+
+ len = miter->length - miter->consumed;
+
+ if (likely(len >= 4 && !needs_unaligned_copy(
+ miter->addr + miter->consumed))) {
+ *ptr = miter->addr + miter->consumed;
+ miter->consumed += 4;
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
+ * @miter: sg mapping iterator used for reading
+ *
+ * Description:
+ * Returns 32-bit word starting at byte pointed to by @miter@
+ * handling any alignment issues. Bytes past the buffer's end
+ * are not accessed (read) but are returned as zeroes. @miter@
+ * is advanced by 4 bytes or to the end of buffer whichever is
+ * closer.
+ *
+ * Context:
+ * Same requirements as in sg_miter_next().
+ *
+ * Returns:
+ * 32-bit word just read.
+ */
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
+{
+ uint32_t *ptr = NULL;
+
+ if (likely(sg_dwiter_get_next_block(miter, &ptr)))
+ return ptr ? *ptr : 0;
+
+ return sg_dwiter_read_buffer(miter);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
+
+static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
+{
+ size_t len, left = 4;
+ void *addr = &data;
+
+ do {
+ len = min(miter->length - miter->consumed, left);
+ memcpy(miter->addr, addr, len);
+ miter->consumed += len;
+ left -= len;
+ if (!left)
+ return;
+ addr += len;
+ flush_kernel_dcache_page(miter->page);
+ } while (sg_dwiter_next(miter));
+}
+
+/**
+ * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
+ * @miter: sg mapping iterator used for writing
+ *
+ * Description:
+ * Writes 32-bit word starting at byte pointed to by @miter@
+ * handling any alignment issues. Bytes which would be written
+ * past the buffer's end are silently discarded. @miter@ is
+ * advanced by 4 bytes or to the end of buffer whichever is closer.
+ *
+ * Context:
+ * Same requirements as in sg_miter_next().
+ */
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
+{
+ uint32_t *ptr = NULL;
+
+ if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
+ if (ptr)
+ *ptr = data;
+ else
+ return;
+ } else
+ sg_dwiter_write_slow(miter, data);
+
+ if (miter->length == miter->consumed)
+ flush_kernel_dcache_page(miter->page);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
+
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 98ffc41eaf2..adc205c49fb 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -147,7 +147,8 @@ struct mmc_blk_request {
static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
{
int err;
- __be32 blocks;
+ u32 result;
+ __be32 *blocks;
struct mmc_request mrq;
struct mmc_command cmd;
@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
mrq.cmd = &cmd;
mrq.data = &data;
- sg_init_one(&sg, &blocks, 4);
+ blocks = kmalloc(4, GFP_KERNEL);
+ if (!blocks)
+ return (u32)-1;
+
+ sg_init_one(&sg, blocks, 4);
mmc_wait_for_req(card->host, &mrq);
+ result = ntohl(*blocks);
+ kfree(blocks);
+
if (cmd.error || data.error)
- return (u32)-1;
+ result = (u32)-1;
- return ntohl(blocks);
+ return result;
}
static u32 get_card_status(struct mmc_card *card, struct request *req)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 26491173275..d84c880fac8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host)
*/
mmc_delay(10);
- host->ios.clock = host->f_min;
+ if (host->f_min > 400000) {
+ pr_warning("%s: Minimum clock frequency too high for "
+ "identification mode\n", mmc_hostname(host));
+ host->ios.clock = host->f_min;
+ } else
+ host->ios.clock = 400000;
+
host->ios.power_mode = MMC_POWER_ON;
mmc_set_ios(host);
@@ -855,61 +861,72 @@ void mmc_rescan(struct work_struct *work)
mmc_bus_get(host);
- if (host->bus_ops == NULL) {
- /*
- * Only we can add a new handler, so it's safe to
- * release the lock here.
- */
+ /* if there is a card registered, check whether it is still present */
+ if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+ host->bus_ops->detect(host);
+
+ mmc_bus_put(host);
+
+
+ mmc_bus_get(host);
+
+ /* if there still is a card present, stop here */
+ if (host->bus_ops != NULL) {
mmc_bus_put(host);
+ goto out;
+ }
- if (host->ops->get_cd && host->ops->get_cd(host) == 0)
- goto out;
+ /* detect a newly inserted card */
- mmc_claim_host(host);
+ /*
+ * Only we can add a new handler, so it's safe to
+ * release the lock here.
+ */
+ mmc_bus_put(host);
- mmc_power_up(host);
- mmc_go_idle(host);
+ if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+ goto out;
- mmc_send_if_cond(host, host->ocr_avail);
+ mmc_claim_host(host);
- /*
- * First we search for SDIO...
- */
- err = mmc_send_io_op_cond(host, 0, &ocr);
- if (!err) {
- if (mmc_attach_sdio(host, ocr))
- mmc_power_off(host);
- goto out;
- }
+ mmc_power_up(host);
+ mmc_go_idle(host);
- /*
- * ...then normal SD...
- */
- err = mmc_send_app_op_cond(host, 0, &ocr);
- if (!err) {
- if (mmc_attach_sd(host, ocr))
- mmc_power_off(host);
- goto out;
- }
+ mmc_send_if_cond(host, host->ocr_avail);
- /*
- * ...and finally MMC.
- */
- err = mmc_send_op_cond(host, 0, &ocr);
- if (!err) {
- if (mmc_attach_mmc(host, ocr))
- mmc_power_off(host);
- goto out;
- }
+ /*
+ * First we search for SDIO...
+ */
+ err = mmc_send_io_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_sdio(host, ocr))
+ mmc_power_off(host);
+ goto out;
+ }
- mmc_release_host(host);
- mmc_power_off(host);
- } else {
- if (host->bus_ops->detect && !host->bus_dead)
- host->bus_ops->detect(host);
+ /*
+ * ...then normal SD...
+ */
+ err = mmc_send_app_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_sd(host, ocr))
+ mmc_power_off(host);
+ goto out;
+ }
- mmc_bus_put(host);
+ /*
+ * ...and finally MMC.
+ */
+ err = mmc_send_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_mmc(host, ocr))
+ mmc_power_off(host);
+ goto out;
}
+
+ mmc_release_host(host);
+ mmc_power_off(host);
+
out:
if (host->caps & MMC_CAP_NEEDS_POLL)
mmc_schedule_delayed_work(&host->detect, HZ);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3eb87bda14f..40111a6d8d5 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -83,6 +83,17 @@ config MMC_SDHCI_OF
If unsure, say N.
+config MMC_SDHCI_PLTFM
+ tristate "SDHCI support on the platform specific bus"
+ depends on MMC_SDHCI
+ help
+ This selects the platform specific bus support for Secure Digital Host
+ Controller Interface.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
- depends on MFD_TMIO
+ depends on MFD_TMIO || MFD_ASIC3
help
This provides support for the SD/MMC cell found in TC6393XB,
- T7L66XB and also ipaq ASIC3
+ T7L66XB and also HTC ASIC3
+
+config MMC_CB710
+ tristate "ENE CB710 MMC/SD Interface support"
+ depends on PCI
+ select CB710_CORE
+ help
+ This option enables support for MMC/SD part of ENE CB710/720 Flash
+ memory card reader found in some laptops (ie. some versions of
+ HP Compaq nx9500).
+
+ This driver can also be built as a module. If so, the module
+ will be called cb710-mmc.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 970a997620e..79da397c5fe 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
+obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
@@ -29,4 +30,8 @@ endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
+ifeq ($(CONFIG_CB710_DEBUG),y)
+ CFLAGS-cb710-mmc += -DDEBUG
+endif
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index b58364ed6bb..fc8a0fe7c5c 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -7,6 +7,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
#define __DRIVERS_MMC_ATMEL_MCI_H__
@@ -14,11 +20,17 @@
#define MCI_CR 0x0000 /* Control */
# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
+# define MCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */
+# define MCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */
# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
#define MCI_MR 0x0004 /* Mode */
# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
+# define MCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
+# define MCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */
+# define MCI_MR_PDCPADV ( 1 << 14) /* Padding Value */
+# define MCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */
#define MCI_DTOR 0x0008 /* Data Timeout */
# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
@@ -28,6 +40,7 @@
# define MCI_SDCSEL_MASK ( 3 << 0)
# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
+# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
# define MCI_SDCBUS_MASK ( 3 << 6)
#define MCI_ARGR 0x0010 /* Command Argument */
#define MCI_CMDR 0x0014 /* Command */
@@ -56,6 +69,9 @@
#define MCI_BLKR 0x0018 /* Block */
# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
+#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
+# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
+# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
#define MCI_RSPR 0x0020 /* Response 0 */
#define MCI_RSPR1 0x0024 /* Response 1 */
#define MCI_RSPR2 0x0028 /* Response 2 */
@@ -83,7 +99,24 @@
# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
+#define MCI_DMA 0x0050 /* DMA Configuration[2] */
+# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
+# define MCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
+# define MCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */
+#define MCI_CFG 0x0054 /* Configuration[2] */
+# define MCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */
+# define MCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */
+# define MCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */
+# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */
+#define MCI_WPMR 0x00e4 /* Write Protection Mode[2] */
+# define MCI_WP_EN ( 1 << 0) /* WP Enable */
+# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */
+#define MCI_WPSR 0x00e8 /* Write Protection Status[2] */
+# define MCI_GET_WP_VS(x) ((x) & 0x0f)
+# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
+#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
+/* This is not including the FIFO Aperture on MCI2 */
#define MCI_REGS_SIZE 0x100
/* Register access macros */
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
new file mode 100644
index 00000000000..11efefb1af5
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -0,0 +1,804 @@
+/*
+ * cb710/mmc.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/* 1, 2, 4, 8, 16, 32, 128, 512 */
+ 0, 1, 2, 3, 4, 5, 7, 9
+};
+#define CB710_MAX_DIVIDER_IDX \
+ (ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+ 33, 10, 20, 25, 30, 35, 40, 45,
+ 50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+ u32 src_freq_idx;
+ u32 divider_idx;
+ int src_hz;
+
+ /* this is magic, unverifiable for me, unless I get
+ * MMC card with cables connected to bus signals */
+ pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+ src_freq_idx = (src_freq_idx >> 16) & 0xF;
+ src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+ for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+ if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+ break;
+ }
+
+ if (src_freq_idx)
+ divider_idx |= 0x8;
+
+ cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+ dev_dbg(cb710_slot_dev(slot),
+ "clock set to %d Hz, wanted %d Hz; flag = %d\n",
+ src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+ hz, (divider_idx & 8) != 0);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+ unsigned short enable, unsigned short mask)
+{
+ /* clear global IE
+ * - it gets set later if any interrupt sources are enabled */
+ mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+ /* look like interrupt is fired whenever
+ * WORD[0x0C] & WORD[0x10] != 0;
+ * -> bit 15 port 0x0C seems to be global interrupt enable
+ */
+
+ enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+ & ~mask) | enable;
+
+ if (enable)
+ enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+ cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+ unsigned short enable, unsigned short mask)
+{
+ struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+ unsigned long flags;
+
+ spin_lock_irqsave(&reader->irq_lock, flags);
+ /* this is the only thing irq_lock protects */
+ __cb710_mmc_enable_irq(slot, enable, mask);
+ spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+ cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
+{
+ return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+ & CB710_MMC_S3_CARD_DETECTED;
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+ dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
+ enable ? 4 : 1, enable ? "s" : "");
+ if (enable)
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+ CB710_MMC_C1_4BIT_DATA_BUS, 0);
+ else
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+ 0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+ u16 status;
+
+ status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+ if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+ /* it is just a guess, so log it */
+ dev_dbg(cb710_slot_dev(slot),
+ "CHECK : ignoring bit 6 in status %04X\n", status);
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+ CB710_MMC_S0_FIFO_UNDERFLOW);
+ status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+ }
+
+ if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+ dev_dbg(cb710_slot_dev(slot),
+ "CHECK : returning EIO on status %04X\n", status);
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+ CB710_MMC_S1_RESET);
+ return -EIO;
+ }
+
+ /* 'what' is a bit in MMC_STATUS1 */
+ if ((status >> 8) & what) {
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+ int err = 0;
+ unsigned limit = 2000000; /* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+ u32 e, x;
+ e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+ while (!(err = cb710_check_event(slot, what))) {
+ if (!--limit) {
+ cb710_dump_regs(cb710_slot_to_chip(slot),
+ CB710_DUMP_REGS_MMC);
+ err = -ETIMEDOUT;
+ break;
+ }
+ udelay(1);
+ }
+
+#ifdef CONFIG_CB710_DEBUG
+ x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+ limit = 2000000 - limit;
+ if (limit > 100)
+ dev_dbg(cb710_slot_dev(slot),
+ "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+ limit, what, e, x);
+#endif
+ return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+ unsigned limit = 500000; /* FIXME: real timeout */
+ int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+ u32 e, x;
+ e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+ while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+ if (!--limit) {
+ cb710_dump_regs(cb710_slot_to_chip(slot),
+ CB710_DUMP_REGS_MMC);
+ err = -ETIMEDOUT;
+ break;
+ }
+ udelay(1);
+ }
+
+#ifdef CONFIG_CB710_DEBUG
+ x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+ limit = 500000 - limit;
+ if (limit > 100)
+ dev_dbg(cb710_slot_dev(slot),
+ "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+ limit, mask, e, x);
+#endif
+ return 0;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+ size_t count, size_t blocksize)
+{
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+ ((count - 1) << 16)|(blocksize - 1));
+
+ dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
+ count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+ /* without this, received data is prepended with 8-bytes of zeroes */
+ u32 r1, r2;
+ int ok = 0;
+
+ r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+ r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+ if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+ & CB710_MMC_S0_FIFO_UNDERFLOW) {
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+ CB710_MMC_S0_FIFO_UNDERFLOW);
+ ok = 1;
+ }
+
+ dev_dbg(cb710_slot_dev(slot),
+ "FIFO-read-hack: expected STATUS0 bit was %s\n",
+ ok ? "set." : "NOT SET!");
+ dev_dbg(cb710_slot_dev(slot),
+ "FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+ r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+ struct sg_mapping_iter *miter, size_t dw_count)
+{
+ if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+ int err = cb710_wait_for_event(slot,
+ CB710_MMC_S1_PIO_TRANSFER_DONE);
+ if (err)
+ return err;
+ }
+
+ cb710_sg_dwiter_write_from_io(miter,
+ slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+ return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+ return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+ struct sg_mapping_iter miter;
+ size_t len, blocks = data->blocks;
+ int err = 0;
+
+ /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+ * except single 8B block */
+ if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+ return -EINVAL;
+
+ sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+ 15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+ cb710_mmc_fifo_hack(slot);
+
+ while (blocks-- > 0) {
+ len = data->blksz;
+
+ while (len >= 16) {
+ err = cb710_mmc_receive_pio(slot, &miter, 4);
+ if (err)
+ goto out;
+ len -= 16;
+ }
+
+ if (!len)
+ continue;
+
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+ len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+ len = (len >= 8) ? 4 : 2;
+ err = cb710_mmc_receive_pio(slot, &miter, len);
+ if (err)
+ goto out;
+ }
+out:
+ cb710_sg_miter_stop_writing(&miter);
+ return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+ struct sg_mapping_iter miter;
+ size_t len, blocks = data->blocks;
+ int err = 0;
+
+ /* TODO: I don't know how/if the hardware handles multiple
+ * non-16B-boundary blocks */
+ if (unlikely(data->blocks > 1 && data->blksz & 15))
+ return -EINVAL;
+
+ sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+ 0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+ while (blocks-- > 0) {
+ len = (data->blksz + 15) >> 4;
+ do {
+ if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+ & CB710_MMC_S2_FIFO_EMPTY)) {
+ err = cb710_wait_for_event(slot,
+ CB710_MMC_S1_PIO_TRANSFER_DONE);
+ if (err)
+ goto out;
+ }
+ cb710_sg_dwiter_read_to_io(&miter,
+ slot->iobase + CB710_MMC_DATA_PORT, 4);
+ } while (--len);
+ }
+out:
+ sg_miter_stop(&miter);
+ return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+ struct mmc_command *cmd)
+{
+ unsigned int flags = cmd->flags;
+ u16 cb_flags = 0;
+
+ /* Windows driver returned 0 for commands for which no response
+ * is expected. It happened that there were only two such commands
+ * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+ * as well be a bug in that driver.
+ *
+ * Original driver set bit 14 for MMC/SD application
+ * commands. There's no difference 'on the wire' and
+ * it apparently works without it anyway.
+ */
+
+ switch (flags & MMC_CMD_MASK) {
+ case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break;
+ case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break;
+ case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break;
+ case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break;
+ }
+
+ if (flags & MMC_RSP_BUSY)
+ cb_flags |= CB710_MMC_RSP_BUSY;
+
+ cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+ if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+ cb_flags |= CB710_MMC_DATA_READ;
+
+ if (flags & MMC_RSP_PRESENT) {
+ /* Windows driver set 01 at bits 4,3 except for
+ * MMC_SET_BLOCKLEN where it set 10. Maybe the
+ * hardware can do something special about this
+ * command? The original driver looks buggy/incomplete
+ * anyway so we ignore this for now.
+ *
+ * I assume that 00 here means no response is expected.
+ */
+ cb_flags |= CB710_MMC_RSP_PRESENT;
+
+ if (flags & MMC_RSP_136)
+ cb_flags |= CB710_MMC_RSP_136;
+ if (!(flags & MMC_RSP_CRC))
+ cb_flags |= CB710_MMC_RSP_NO_CRC;
+ }
+
+ return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+ struct mmc_command *cmd)
+{
+ unsigned rsp_opcode, wanted_opcode;
+
+ /* Looks like final byte with CRC is always stripped (same as SDHCI) */
+ if (cmd->flags & MMC_RSP_136) {
+ u32 resp[4];
+
+ resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+ resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+ resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+ resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+ rsp_opcode = resp[0] >> 24;
+
+ cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+ cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+ cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+ cmd->resp[3] = (resp[3] << 8);
+ } else {
+ rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+ cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+ }
+
+ wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+ if (rsp_opcode != wanted_opcode)
+ cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+ struct mmc_data *data)
+{
+ int error, to;
+
+ if (data->flags & MMC_DATA_READ)
+ error = cb710_mmc_receive(slot, data);
+ else
+ error = cb710_mmc_send(slot, data);
+
+ to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+ if (!error)
+ error = to;
+
+ if (!error)
+ data->bytes_xfered = data->blksz * data->blocks;
+ return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ struct mmc_data *data = cmd->data;
+
+ u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+ dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+ if (data) {
+ if (!cb710_is_transfer_size_supported(data)) {
+ data->error = -EINVAL;
+ return -1;
+ }
+ cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+ }
+
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+ cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+ cb710_mmc_reset_events(slot);
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+ cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+ if (cmd->error)
+ return -1;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ cb710_receive_response(slot, cmd);
+ if (cmd->error)
+ return -1;
+ }
+
+ if (data)
+ data->error = cb710_mmc_transfer_data(slot, data);
+ return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+ WARN_ON(reader->mrq != NULL);
+
+ reader->mrq = mrq;
+ cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+ if (cb710_mmc_is_card_inserted(slot)) {
+ if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+ cb710_mmc_command(mmc, mrq->stop);
+ mdelay(1);
+ } else {
+ mrq->cmd->error = -ENOMEDIUM;
+ }
+
+ tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+ int err;
+
+ /* a lot of magic; see comment in cb710_mmc_set_clock() */
+ dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ mdelay(1);
+ dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ mdelay(1);
+ dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ mdelay(2);
+ dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ /* This port behaves weird: quick byte reads of 0x08,0x09 return
+ * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+ * read/written from userspace... What am I missing here?
+ * (it doesn't depend on write-to-read delay) */
+ cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+ return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ int err;
+
+ cb710_mmc_set_clock(mmc, ios->clock);
+
+ if (!cb710_mmc_is_card_inserted(slot)) {
+ dev_dbg(cb710_slot_dev(slot),
+ "no card inserted - ignoring bus powerup request\n");
+ ios->power_mode = MMC_POWER_OFF;
+ }
+
+ if (ios->power_mode != reader->last_power_mode)
+ switch (ios->power_mode) {
+ case MMC_POWER_ON:
+ err = cb710_mmc_powerup(slot);
+ if (err) {
+ dev_warn(cb710_slot_dev(slot),
+ "powerup failed (%d)- retrying\n", err);
+ cb710_mmc_powerdown(slot);
+ udelay(1);
+ err = cb710_mmc_powerup(slot);
+ if (err)
+ dev_warn(cb710_slot_dev(slot),
+ "powerup retry failed (%d) - expect errors\n",
+ err);
+ }
+ reader->last_power_mode = MMC_POWER_ON;
+ break;
+ case MMC_POWER_OFF:
+ cb710_mmc_powerdown(slot);
+ reader->last_power_mode = MMC_POWER_OFF;
+ break;
+ case MMC_POWER_UP:
+ default:
+ /* ignore */;
+ }
+
+ cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+ cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+ return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+ & CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ u32 status, config1, config2, irqen;
+
+ status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+ irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+ config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+ config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+ dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+ "ie: %08X, c2: %08X, c1: %08X\n",
+ status, irqen, config2, config1);
+
+ if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+ /* ack the event */
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+ CB710_MMC_S1_CARD_CHANGED);
+ if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+ == CB710_MMC_IE_CISTATUS_MASK)
+ mmc_detect_change(mmc, HZ/5);
+ } else {
+ dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+ spin_lock(&reader->irq_lock);
+ __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+ spin_unlock(&reader->irq_lock);
+ }
+
+ return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+ struct mmc_host *mmc = (void *)data;
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ struct mmc_request *mrq = reader->mrq;
+
+ reader->mrq = NULL;
+ mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+ .request = cb710_mmc_request,
+ .set_ios = cb710_mmc_set_ios,
+ .get_ro = cb710_mmc_get_ro
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+ int err;
+
+ err = mmc_suspend_host(mmc, state);
+ if (err)
+ return err;
+
+ cb710_mmc_enable_irq(slot, 0, ~0);
+ return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+
+ cb710_mmc_enable_irq(slot, 0, ~0);
+
+ return mmc_resume_host(mmc);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_mmc_init(struct platform_device *pdev)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+ struct mmc_host *mmc;
+ struct cb710_mmc_reader *reader;
+ int err;
+ u32 val;
+
+ mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+ if (!mmc)
+ return -ENOMEM;
+
+ dev_set_drvdata(&pdev->dev, mmc);
+
+ /* harmless (maybe) magic */
+ pci_read_config_dword(chip->pdev, 0x48, &val);
+ val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+ dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+ val *= 1000000;
+
+ mmc->ops = &cb710_mmc_host;
+ mmc->f_max = val;
+ mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+
+ reader = mmc_priv(mmc);
+
+ tasklet_init(&reader->finish_req_tasklet,
+ cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+ spin_lock_init(&reader->irq_lock);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+ cb710_mmc_enable_irq(slot, 0, ~0);
+ cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+ err = mmc_add_host(mmc);
+ if (unlikely(err))
+ goto err_free_mmc;
+
+ dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+ mmc_hostname(mmc));
+
+ cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+ return 0;
+
+err_free_mmc:
+ dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+ mmc_free_host(mmc);
+ return err;
+}
+
+static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+ cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+ mmc_remove_host(mmc);
+
+ /* IRQs should be disabled now, but let's stay on the safe side */
+ cb710_mmc_enable_irq(slot, 0, ~0);
+ cb710_set_irq_handler(slot, NULL);
+
+ /* clear config ports - just in case */
+ cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+ cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+ tasklet_kill(&reader->finish_req_tasklet);
+
+ mmc_free_host(mmc);
+ return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+ .driver.name = "cb710-mmc",
+ .probe = cb710_mmc_init,
+ .remove = __devexit_p(cb710_mmc_exit),
+#ifdef CONFIG_PM
+ .suspend = cb710_mmc_suspend,
+ .resume = cb710_mmc_resume,
+#endif
+};
+
+static int __init cb710_mmc_init_module(void)
+{
+ return platform_driver_register(&cb710_mmc_driver);
+}
+
+static void __exit cb710_mmc_cleanup_module(void)
+{
+ platform_driver_unregister(&cb710_mmc_driver);
+}
+
+module_init(cb710_mmc_init_module);
+module_exit(cb710_mmc_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");
diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h
new file mode 100644
index 00000000000..e845c776bdd
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.h
@@ -0,0 +1,104 @@
+/*
+ * cb710/cb710-mmc.h
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+ struct tasklet_struct finish_req_tasklet;
+ struct mmc_request *mrq;
+ spinlock_t irq_lock;
+ unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+ return dev_get_drvdata(&slot->pdev.dev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+ struct platform_device *pdev = container_of(mmc_dev(mmc),
+ struct platform_device, dev);
+ return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT 0x00
+
+#define CB710_MMC_CONFIG_PORT 0x04
+#define CB710_MMC_CONFIG0_PORT 0x04
+#define CB710_MMC_CONFIG1_PORT 0x05
+#define CB710_MMC_C1_4BIT_DATA_BUS 0x40
+#define CB710_MMC_CONFIG2_PORT 0x06
+#define CB710_MMC_C2_READ_PIO_SIZE_MASK 0x0F /* N-1 */
+#define CB710_MMC_CONFIG3_PORT 0x07
+
+#define CB710_MMC_CONFIGB_PORT 0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT 0x0C
+#define CB710_MMC_IE_TEST_MASK 0x00BF
+#define CB710_MMC_IE_CARD_INSERTION_STATUS 0x1000
+#define CB710_MMC_IE_IRQ_ENABLE 0x8000
+#define CB710_MMC_IE_CISTATUS_MASK \
+ (CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT 0x10
+#define CB710_MMC_STATUS_ERROR_EVENTS 0x60FF
+#define CB710_MMC_STATUS0_PORT 0x10
+#define CB710_MMC_S0_FIFO_UNDERFLOW 0x40
+#define CB710_MMC_STATUS1_PORT 0x11
+#define CB710_MMC_S1_COMMAND_SENT 0x01
+#define CB710_MMC_S1_DATA_TRANSFER_DONE 0x02
+#define CB710_MMC_S1_PIO_TRANSFER_DONE 0x04
+#define CB710_MMC_S1_CARD_CHANGED 0x10
+#define CB710_MMC_S1_RESET 0x20
+#define CB710_MMC_STATUS2_PORT 0x12
+#define CB710_MMC_S2_FIFO_READY 0x01
+#define CB710_MMC_S2_FIFO_EMPTY 0x02
+#define CB710_MMC_S2_BUSY_10 0x10
+#define CB710_MMC_S2_BUSY_20 0x20
+#define CB710_MMC_STATUS3_PORT 0x13
+#define CB710_MMC_S3_CARD_DETECTED 0x02
+#define CB710_MMC_S3_WRITE_PROTECTED 0x04
+
+#define CB710_MMC_CMD_TYPE_PORT 0x14
+#define CB710_MMC_RSP_TYPE_MASK 0x0007
+#define CB710_MMC_RSP_R1 (0)
+#define CB710_MMC_RSP_136 (5)
+#define CB710_MMC_RSP_NO_CRC (2)
+#define CB710_MMC_RSP_PRESENT_MASK 0x0018
+#define CB710_MMC_RSP_NONE (0 << 3)
+#define CB710_MMC_RSP_PRESENT (1 << 3)
+#define CB710_MMC_RSP_PRESENT_X (2 << 3)
+#define CB710_MMC_CMD_TYPE_MASK 0x0060
+#define CB710_MMC_CMD_BC (0 << 5)
+#define CB710_MMC_CMD_BCR (1 << 5)
+#define CB710_MMC_CMD_AC (2 << 5)
+#define CB710_MMC_CMD_ADTC (3 << 5)
+#define CB710_MMC_DATA_READ 0x0080
+#define CB710_MMC_CMD_CODE_MASK 0x3F00
+#define CB710_MMC_CMD_CODE_SHIFT 8
+#define CB710_MMC_IS_APP_CMD 0x4000
+#define CB710_MMC_RSP_BUSY 0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT 0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT 0x1C
+#define CB710_MMC_RESPONSE0_PORT 0x20
+#define CB710_MMC_RESPONSE1_PORT 0x24
+#define CB710_MMC_RESPONSE2_PORT 0x28
+#define CB710_MMC_RESPONSE3_PORT 0x2C
+
+#endif /* LINUX_CB710_MMC_H */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index f48349d18c9..240608cc7ae 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -97,6 +97,14 @@
*/
#define r1b_timeout (HZ * 3)
+/* One of the critical speed parameters is the amount of data which may
+ * be transfered in one command. If this value is too low, the SD card
+ * controller has to do multiple partial block writes (argggh!). With
+ * today (2008) SD cards there is little speed gain if we transfer more
+ * than 64 KBytes at a time. So use this value until there is any indication
+ * that we should do more here.
+ */
+#define MMC_SPI_BLOCKSATONCE 128
/****************************************************************************/
@@ -327,15 +335,16 @@ checkstatus:
/* Status byte: the entire seven-bit R1 response. */
if (cmd->resp[0] != 0) {
- if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
- | R1_SPI_ILLEGAL_COMMAND)
+ if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS)
& cmd->resp[0])
- value = -EINVAL;
+ value = -EFAULT; /* Bad address */
+ else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0])
+ value = -ENOSYS; /* Function not implemented */
else if (R1_SPI_COM_CRC & cmd->resp[0])
- value = -EILSEQ;
+ value = -EILSEQ; /* Illegal byte sequence */
else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
& cmd->resp[0])
- value = -EIO;
+ value = -EIO; /* I/O error */
/* else R1_SPI_IDLE, "it's resetting" */
}
@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc->ops = &mmc_spi_ops;
mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
+ mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE;
+ mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE;
+ mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
+ mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
mmc->caps = MMC_CAP_SPI;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f4cbe473670..bc14bb1b057 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev)
}
mmc->f_min = clk_get_rate(host->clk) >> 16;
- if (mmc->f_min < 400000)
- mmc->f_min = 400000;
mmc->f_max = clk_get_rate(host->clk) >> 1;
/* recommended in data sheet */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index dceb5ee3bda..e7a331de573 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev)
#endif
static struct platform_driver mmc_omap_driver = {
- .probe = mmc_omap_probe,
.remove = mmc_omap_remove,
.suspend = mmc_omap_suspend,
.resume = mmc_omap_resume,
@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = {
static int __init mmc_omap_init(void)
{
- return platform_driver_register(&mmc_omap_driver);
+ return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
}
static void __exit mmc_omap_exit(void)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 430095725f9..d7d7109ef47 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -27,6 +27,7 @@
#include <linux/err.h>
#include <linux/mmc/host.h>
#include <linux/io.h>
+#include <linux/regulator/consumer.h>
#include <asm/sizes.h>
@@ -67,8 +68,42 @@ struct pxamci_host {
unsigned int dma_dir;
unsigned int dma_drcmrrx;
unsigned int dma_drcmrtx;
+
+ struct regulator *vcc;
};
+static inline void pxamci_init_ocr(struct pxamci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+ host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+ if (IS_ERR(host->vcc))
+ host->vcc = NULL;
+ else {
+ host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+ if (host->pdata && host->pdata->ocr_mask)
+ dev_warn(mmc_dev(host->mmc),
+ "ocr_mask/setpower will not be used\n");
+ }
+#endif
+ if (host->vcc == NULL) {
+ /* fall-back to platform data */
+ host->mmc->ocr_avail = host->pdata ?
+ host->pdata->ocr_mask :
+ MMC_VDD_32_33 | MMC_VDD_33_34;
+ }
+}
+
+static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
+{
+#ifdef CONFIG_REGULATOR
+ if (host->vcc)
+ mmc_regulator_set_ocr(host->vcc, vdd);
+#endif
+ if (!host->vcc && host->pdata && host->pdata->setpower)
+ host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
static void pxamci_stop_clock(struct pxamci_host *host)
{
if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->power_mode != ios->power_mode) {
host->power_mode = ios->power_mode;
- if (host->pdata && host->pdata->setpower)
- host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+ pxamci_set_power(host, ios->vdd);
if (ios->power_mode == MMC_POWER_ON)
host->cmdat |= CMDAT_INIT;
@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev)
mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
: host->clkrate;
- mmc->ocr_avail = host->pdata ?
- host->pdata->ocr_mask :
- MMC_VDD_32_33|MMC_VDD_33_34;
+ pxamci_init_ocr(host);
+
mmc->caps = 0;
host->cmdat = 0;
if (!cpu_is_pxa25x()) {
@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev)
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
+ if (host->vcc)
+ regulator_put(host->vcc);
+
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
new file mode 100644
index 00000000000..297f40ae6ad
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -0,0 +1,168 @@
+/*
+ * sdhci-pltfm.c Support for SDHCI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform devices
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/io.h>
+
+#include "sdhci.h"
+
+/*****************************************************************************\
+ * *
+ * SDHCI core callbacks *
+ * *
+\*****************************************************************************/
+
+static struct sdhci_ops sdhci_pltfm_ops = {
+};
+
+/*****************************************************************************\
+ * *
+ * Device probing/removal *
+ * *
+\*****************************************************************************/
+
+static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct resource *iomem;
+ int ret;
+
+ BUG_ON(pdev == NULL);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (resource_size(iomem) != 0x100)
+ dev_err(&pdev->dev, "Invalid iomem size. You may "
+ "experience problems.\n");
+
+ if (pdev->dev.parent)
+ host = sdhci_alloc_host(pdev->dev.parent, 0);
+ else
+ host = sdhci_alloc_host(&pdev->dev, 0);
+
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ goto err;
+ }
+
+ host->hw_name = "platform";
+ host->ops = &sdhci_pltfm_ops;
+ host->irq = platform_get_irq(pdev, 0);
+
+ if (!request_mem_region(iomem->start, resource_size(iomem),
+ mmc_hostname(host->mmc))) {
+ dev_err(&pdev->dev, "cannot request region\n");
+ ret = -EBUSY;
+ goto err_request;
+ }
+
+ host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+ if (!host->ioaddr) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ ret = -ENOMEM;
+ goto err_remap;
+ }
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_add_host;
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+
+err_add_host:
+ iounmap(host->ioaddr);
+err_remap:
+ release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+ sdhci_free_host(host);
+err:
+ printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret);
+ return ret;
+}
+
+static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int dead;
+ u32 scratch;
+
+ dead = 0;
+ scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+ sdhci_remove_host(host, dead);
+ iounmap(host->ioaddr);
+ release_mem_region(iomem->start, resource_size(iomem));
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_pltfm_driver = {
+ .driver = {
+ .name = "sdhci",
+ .owner = THIS_MODULE,
+ },
+ .probe = sdhci_pltfm_probe,
+ .remove = __devexit_p(sdhci_pltfm_remove),
+};
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+ return platform_driver_register(&sdhci_pltfm_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+ platform_driver_unregister(&sdhci_pltfm_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci");
+
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2226e..35789c6edc1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
sdhci_readl(host, SDHCI_CAPABILITIES),
sdhci_readl(host, SDHCI_MAX_CURRENT));
+ if (host->flags & SDHCI_USE_ADMA)
+ printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
}
@@ -1005,12 +1010,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
{
u8 pwr;
- if (host->power == power)
+ if (power == (unsigned short)-1)
+ pwr = 0;
+ else {
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ if (host->pwr == pwr)
return;
- if (power == (unsigned short)-1) {
+ host->pwr = pwr;
+
+ if (pwr == 0) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
- goto out;
+ return;
}
/*
@@ -1020,35 +1047,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
- pwr = SDHCI_POWER_ON;
-
- switch (1 << power) {
- case MMC_VDD_165_195:
- pwr |= SDHCI_POWER_180;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- pwr |= SDHCI_POWER_300;
- break;
- case MMC_VDD_32_33:
- case MMC_VDD_33_34:
- pwr |= SDHCI_POWER_330;
- break;
- default:
- BUG();
- }
-
/*
* At least the Marvell CaFe chip gets confused if we set the voltage
* and set turn on power at the same time, so set the voltage first.
*/
if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
- sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ pwr |= SDHCI_POWER_ON;
-out:
- host->power = power;
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
}
/*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 65c6f996bbd..2de08349c3c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -255,7 +255,7 @@ struct sdhci_host {
unsigned int timeout_clk; /* Timeout freq (KHz) */
unsigned int clock; /* Current clock (MHz) */
- unsigned short power; /* Current voltage */
+ u8 pwr; /* Current voltage */
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 63fbd5b7d31..91991b460c4 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -10,7 +10,7 @@
*
* Driver for the MMC / SD / SDIO cell found in:
*
- * TC6393XB TC6391XB TC6387XB T7L66XB
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
*
* This driver draws mainly on scattered spec sheets, Reverse engineering
* of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit
@@ -35,69 +35,47 @@
#include "tmio_mmc.h"
-/*
- * Fixme - documentation conflicts on what the clock values are for the
- * various dividers.
- * One document I have says that its a divisor of a 24MHz clock, another 33.
- * This probably depends on HCLK for a given platform, so we may need to
- * require HCLK be passed to us from the MFD core.
- *
- */
-
static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
{
- void __iomem *cnf = host->cnf;
- void __iomem *ctl = host->ctl;
u32 clk = 0, clock;
if (new_clock) {
- for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+ for (clock = host->mmc->f_min, clk = 0x80000080;
+ new_clock >= (clock<<1); clk >>= 1)
clock <<= 1;
- clk >>= 1;
- }
- if (clk & 0x1)
- clk = 0x20000;
-
- clk >>= 2;
- tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
clk |= 0x100;
}
- tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+ sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}
static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
{
- void __iomem *ctl = host->ctl;
-
- tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+ sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
msleep(10);
- tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
- ctl + CTL_SD_CARD_CLK_CTL);
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
msleep(10);
}
static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
{
- void __iomem *ctl = host->ctl;
-
- tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
- ctl + CTL_SD_CARD_CLK_CTL);
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
msleep(10);
- tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+ sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
msleep(10);
}
static void reset(struct tmio_mmc_host *host)
{
- void __iomem *ctl = host->ctl;
-
/* FIXME - should we set stop clock reg here */
- tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
- tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+ sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
msleep(10);
- tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
- tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+ sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
msleep(10);
}
@@ -129,13 +107,12 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host)
static int
tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
{
- void __iomem *ctl = host->ctl;
struct mmc_data *data = host->data;
int c = cmd->opcode;
/* Command 12 is handled by hardware */
if (cmd->opcode == 12 && !cmd->arg) {
- tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+ sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
return 0;
}
@@ -160,18 +137,18 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
if (data) {
c |= DATA_PRESENT;
if (data->blocks > 1) {
- tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+ sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
c |= TRANSFER_MULTI;
}
if (data->flags & MMC_DATA_READ)
c |= TRANSFER_READ;
}
- enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+ enable_mmc_irqs(host, TMIO_MASK_CMD);
/* Fire off the command */
- tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
- tmio_iowrite16(c, ctl + CTL_SD_CMD);
+ sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
+ sd_ctrl_write16(host, CTL_SD_CMD, c);
return 0;
}
@@ -183,7 +160,6 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
*/
static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
{
- void __iomem *ctl = host->ctl;
struct mmc_data *data = host->data;
unsigned short *buf;
unsigned int count;
@@ -206,9 +182,9 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
/* Transfer the data */
if (data->flags & MMC_DATA_READ)
- tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+ sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
else
- tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+ sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
host->sg_off += count;
@@ -222,7 +198,6 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
{
- void __iomem *ctl = host->ctl;
struct mmc_data *data = host->data;
struct mmc_command *stop;
@@ -251,13 +226,13 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
*/
if (data->flags & MMC_DATA_READ)
- disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+ disable_mmc_irqs(host, TMIO_MASK_READOP);
else
- disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+ disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
if (stop) {
if (stop->opcode == 12 && !stop->arg)
- tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+ sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
else
BUG();
}
@@ -268,9 +243,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
unsigned int stat)
{
- void __iomem *ctl = host->ctl, *addr;
struct mmc_command *cmd = host->cmd;
- int i;
+ int i, addr;
if (!host->cmd) {
pr_debug("Spurious CMD irq\n");
@@ -284,8 +258,8 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
* modify the order of the response for short response command types.
*/
- for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
- cmd->resp[i] = tmio_ioread32(addr);
+ for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+ cmd->resp[i] = sd_ctrl_read32(host, addr);
if (cmd->flags & MMC_RSP_136) {
cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
@@ -307,9 +281,9 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
*/
if (host->data && !cmd->error) {
if (host->data->flags & MMC_DATA_READ)
- enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+ enable_mmc_irqs(host, TMIO_MASK_READOP);
else
- enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+ enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
} else {
tmio_mmc_finish_request(host);
}
@@ -321,20 +295,19 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
static irqreturn_t tmio_mmc_irq(int irq, void *devid)
{
struct tmio_mmc_host *host = devid;
- void __iomem *ctl = host->ctl;
unsigned int ireg, irq_mask, status;
pr_debug("MMC IRQ begin\n");
- status = tmio_ioread32(ctl + CTL_STATUS);
- irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+ status = sd_ctrl_read32(host, CTL_STATUS);
+ irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
ireg = status & TMIO_MASK_IRQ & ~irq_mask;
pr_debug_status(status);
pr_debug_status(ireg);
if (!ireg) {
- disable_mmc_irqs(ctl, status & ~irq_mask);
+ disable_mmc_irqs(host, status & ~irq_mask);
pr_debug("tmio_mmc: Spurious irq, disabling! "
"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
@@ -346,7 +319,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
while (ireg) {
/* Card insert / remove attempts */
if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
- ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+ ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
TMIO_STAT_CARD_REMOVE);
mmc_detect_change(host->mmc, 0);
}
@@ -358,25 +331,25 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
/* Command completion */
if (ireg & TMIO_MASK_CMD) {
- ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+ ack_mmc_irqs(host, TMIO_MASK_CMD);
tmio_mmc_cmd_irq(host, status);
}
/* Data transfer */
if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
- ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+ ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
tmio_mmc_pio_irq(host);
}
/* Data transfer completion */
if (ireg & TMIO_STAT_DATAEND) {
- ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+ ack_mmc_irqs(host, TMIO_STAT_DATAEND);
tmio_mmc_data_irq(host);
}
/* Check status - keep going until we've handled it all */
- status = tmio_ioread32(ctl + CTL_STATUS);
- irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+ status = sd_ctrl_read32(host, CTL_STATUS);
+ irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
ireg = status & TMIO_MASK_IRQ & ~irq_mask;
pr_debug("Status at end of loop: %08x\n", status);
@@ -391,8 +364,6 @@ out:
static int tmio_mmc_start_data(struct tmio_mmc_host *host,
struct mmc_data *data)
{
- void __iomem *ctl = host->ctl;
-
pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
data->blksz, data->blocks);
@@ -407,8 +378,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
host->data = data;
/* Set transfer length / blocksize */
- tmio_iowrite16(data->blksz, ctl + CTL_SD_XFER_LEN);
- tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+ sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+ sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
return 0;
}
@@ -449,8 +420,6 @@ fail:
static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
- void __iomem *cnf = host->cnf;
- void __iomem *ctl = host->ctl;
if (ios->clock)
tmio_mmc_set_clock(host, ios->clock);
@@ -458,12 +427,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* Power sequence - OFF -> ON -> UP */
switch (ios->power_mode) {
case MMC_POWER_OFF: /* power down SD bus */
- tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+ sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
tmio_mmc_clk_stop(host);
break;
case MMC_POWER_ON: /* power up SD bus */
- tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+ sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
break;
case MMC_POWER_UP: /* start bus clock */
tmio_mmc_clk_start(host);
@@ -472,10 +441,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->bus_width) {
case MMC_BUS_WIDTH_1:
- tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
break;
case MMC_BUS_WIDTH_4:
- tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
break;
}
@@ -486,9 +455,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
static int tmio_mmc_get_ro(struct mmc_host *mmc)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
- void __iomem *ctl = host->ctl;
- return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+ return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
}
static struct mmc_host_ops tmio_mmc_ops = {
@@ -518,13 +486,8 @@ static int tmio_mmc_resume(struct platform_device *dev)
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct mmc_host *mmc = platform_get_drvdata(dev);
struct tmio_mmc_host *host = mmc_priv(mmc);
- void __iomem *cnf = host->cnf;
int ret = 0;
- /* Enable the MMC/SD Control registers */
- tmio_iowrite16(SDCREN, cnf + CNF_CMD);
- tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
-
/* Tell the MFD core we are ready to be enabled */
if (cell->enable) {
ret = cell->enable(dev);
@@ -532,6 +495,11 @@ static int tmio_mmc_resume(struct platform_device *dev)
goto out;
}
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(host, CNF_CMD, SDCREN);
+ sd_config_write32(host, CNF_CTL_BASE,
+ (dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
mmc_resume_host(mmc);
out:
@@ -545,20 +513,25 @@ out:
static int __devinit tmio_mmc_probe(struct platform_device *dev)
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct tmio_mmc_data *pdata;
struct resource *res_ctl, *res_cnf;
struct tmio_mmc_host *host;
struct mmc_host *mmc;
- int ret = -ENOMEM;
+ int ret = -EINVAL;
if (dev->num_resources != 3)
goto out;
res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
- if (!res_ctl || !res_cnf) {
- ret = -EINVAL;
+ if (!res_ctl || !res_cnf)
goto out;
- }
+
+ pdata = cell->driver_data;
+ if (!pdata || !pdata->hclk)
+ goto out;
+
+ ret = -ENOMEM;
mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
if (!mmc)
@@ -568,6 +541,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
host->mmc = mmc;
platform_set_drvdata(dev, mmc);
+ /* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+ host->bus_shift = resource_size(res_ctl) >> 10;
+
host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
if (!host->ctl)
goto host_free;
@@ -578,15 +554,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA;
- mmc->f_min = 46875; /* 24000000 / 512 */
- mmc->f_max = 24000000;
+ mmc->f_max = pdata->hclk;
+ mmc->f_min = mmc->f_max / 512;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- /* Enable the MMC/SD Control registers */
- tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
- tmio_iowrite32(dev->resource[0].start & 0xfffe,
- host->cnf + CNF_CTL_BASE);
-
/* Tell the MFD core we are ready to be enabled */
if (cell->enable) {
ret = cell->enable(dev);
@@ -594,14 +565,19 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
goto unmap_cnf;
}
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(host, CNF_CMD, SDCREN);
+ sd_config_write32(host, CNF_CTL_BASE,
+ (dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
/* Disable SD power during suspend */
- tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+ sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
/* The below is required but why? FIXME */
- tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+ sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
/* Power down SD bus*/
- tmio_iowrite8(0x0, host->cnf + CNF_PWR_CTL_2);
+ sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
tmio_mmc_clk_stop(host);
reset(host);
@@ -612,22 +588,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
else
goto unmap_cnf;
- disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+ disable_mmc_irqs(host, TMIO_MASK_ALL);
- ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
- host);
+ ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
+ IRQF_TRIGGER_FALLING, "tmio-mmc", host);
if (ret)
goto unmap_cnf;
- set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
-
mmc_add_host(mmc);
printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
(unsigned long)host->ctl, host->irq);
/* Unmask the IRQs we want to know about */
- enable_mmc_irqs(host->ctl, TMIO_MASK_IRQ);
+ enable_mmc_irqs(host, TMIO_MASK_IRQ);
return 0;
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9c831ab2ece..9fa99859497 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -83,34 +83,36 @@
TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
-#define enable_mmc_irqs(ctl, i) \
+
+#define enable_mmc_irqs(host, i) \
do { \
u32 mask;\
- mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+ mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \
mask &= ~((i) & TMIO_MASK_IRQ); \
- tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+ sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
} while (0)
-#define disable_mmc_irqs(ctl, i) \
+#define disable_mmc_irqs(host, i) \
do { \
u32 mask;\
- mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+ mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \
mask |= ((i) & TMIO_MASK_IRQ); \
- tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+ sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
} while (0)
-#define ack_mmc_irqs(ctl, i) \
+#define ack_mmc_irqs(host, i) \
do { \
u32 mask;\
- mask = tmio_ioread32((ctl) + CTL_STATUS); \
+ mask = sd_ctrl_read32((host), CTL_STATUS); \
mask &= ~((i) & TMIO_MASK_IRQ); \
- tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+ sd_ctrl_write32((host), CTL_STATUS, mask); \
} while (0)
struct tmio_mmc_host {
void __iomem *cnf;
void __iomem *ctl;
+ unsigned long bus_shift;
struct mmc_command *cmd;
struct mmc_request *mrq;
struct mmc_data *data;
@@ -123,6 +125,63 @@ struct tmio_mmc_host {
unsigned int sg_off;
};
+#include <linux/io.h>
+
+static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+ return readw(host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+ u16 *buf, int count)
+{
+ readsw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
+{
+ return readw(host->ctl + (addr << host->bus_shift)) |
+ readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
+ u16 val)
+{
+ writew(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+ u16 *buf, int count)
+{
+ writesw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
+ u32 val)
+{
+ writew(val, host->ctl + (addr << host->bus_shift));
+ writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
+ u8 val)
+{
+ writeb(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
+ u16 val)
+{
+ writew(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
+ u32 val)
+{
+ writew(val, host->cnf + (addr << host->bus_shift));
+ writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
+}
+
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
new file mode 100644
index 00000000000..63bc9a4d292
--- /dev/null
+++ b/include/linux/cb710.h
@@ -0,0 +1,231 @@
+/*
+ * cb710/cb710.h
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+ struct platform_device pdev;
+ void __iomem *iobase;
+ cb710_irq_handler_t irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+ struct pci_dev *pdev;
+ void __iomem *iobase;
+ unsigned platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ atomic_t slot_refs_count;
+#endif
+ unsigned slot_mask;
+ unsigned slots;
+ spinlock_t irq_lock;
+ struct cb710_slot slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC 1
+#define CB710_SLOT_MS 2
+#define CB710_SLOT_SM 4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot, \
+ unsigned port, u##t value) \
+{ \
+ iowrite##t(value, slot->iobase + port); \
+} \
+ \
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \
+ unsigned port) \
+{ \
+ return ioread##t(slot->iobase + port); \
+} \
+ \
+static inline void cb710_modify_port_##t(struct cb710_slot *slot, \
+ unsigned port, u##t set, u##t clear) \
+{ \
+ iowrite##t( \
+ (ioread##t(slot->iobase + port) & ~clear)|set, \
+ slot->iobase + port); \
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+ int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+ cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+ struct platform_device *pdev)
+{
+ return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+ return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+ return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+ return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC 0x0F
+#define CB710_DUMP_REGS_MS 0x30
+#define CB710_DUMP_REGS_SM 0xC0
+#define CB710_DUMP_REGS_ALL 0xFF
+#define CB710_DUMP_REGS_MASK 0xFF
+
+#define CB710_DUMP_ACCESS_8 0x100
+#define CB710_DUMP_ACCESS_16 0x200
+#define CB710_DUMP_ACCESS_32 0x400
+#define CB710_DUMP_ACCESS_ALL 0x700
+#define CB710_DUMP_ACCESS_MASK 0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ * cb710/sgbuf2.h
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/**
+ * cb710_sg_miter_stop_writing - stop mapping iteration after writing
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ * Stops mapping iterator @miter. @miter should have been started
+ * started using sg_miter_start(). A stopped iteration can be
+ * resumed by calling sg_miter_next() on it. This is useful when
+ * resources (kmap) need to be released during iteration.
+ *
+ * This is a convenience wrapper that will be optimized out for arches
+ * that don't need flush_kernel_dcache_page().
+ *
+ * Context:
+ * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
+ */
+static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
+{
+ if (miter->page)
+ flush_kernel_dcache_page(miter->page);
+ sg_miter_stop(miter);
+}
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ * sg_miter_start();
+ * cb710_sg_dwiter_write_from_io();
+ * cb710_sg_miter_stop_writing();
+ *
+ * Best-case writing (transfer to device):
+ * sg_miter_start();
+ * cb710_sg_dwiter_read_to_io();
+ * sg_miter_stop();
+ */
+
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ * Reads @count 32-bit words from register @port and stores it in
+ * buffer iterated by @miter. Data that would overflow the buffer
+ * is silently ignored. Iterator is advanced by 4*@count bytes
+ * or to the buffer's end whichever is closer.
+ *
+ * Context:
+ * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+ void __iomem *port, size_t count)
+{
+ while (count-- > 0)
+ cb710_sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ * Writes @count 32-bit words to register @port from buffer iterated
+ * through @miter. If buffer ends before @count words are written
+ * missing data is replaced by zeroes. @miter is advanced by 4*@count
+ * bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+ void __iomem *port, size_t count)
+{
+ while (count-- > 0)
+ iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 516d955ab8a..c377118884e 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -19,6 +19,13 @@
} while (0)
/*
+ * data for the MMC controller
+ */
+struct tmio_mmc_data {
+ unsigned int hclk;
+};
+
+/*
* data for the NAND controller
*/
struct tmio_nand_data {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 19f8e6d1a4d..9f36e1cdbf0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2127,6 +2127,7 @@
#define PCI_VENDOR_ID_MAINPINE 0x1522
#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100
#define PCI_VENDOR_ID_ENE 0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510
#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550
#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551
#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750