aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Milburn <dmilburn@redhat.com>2010-11-12 15:38:21 -0600
committerJeff Garzik <jgarzik@redhat.com>2011-01-05 19:43:22 -0500
commit02cdfcf043c5c6ebcbbaba1c35130b5fbcb10867 (patch)
tree1430ddb5236adbcc1fbfaa67b225efd0dbe3e80c
parent3c0eee3fe6a3a1c745379547c7e7c904aa64f6d5 (diff)
[libata] new driver acard_ahci, for ATP8620 host controller
Add support for Acard ATP8620 host controller. Based upon initial version by Jeff Garzik. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r--drivers/ata/Kconfig8
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/acard-ahci.c528
-rw-r--r--drivers/ata/ahci.h3
-rw-r--r--drivers/ata/libahci.c11
5 files changed, 545 insertions, 6 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 36e2319264b..e3e0e95c7aa 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -90,6 +90,14 @@ config SATA_INIC162X
help
This option enables support for Initio 162x Serial ATA.
+config SATA_ACARD_AHCI
+ tristate "ACard AHCI variant (ATP 8620)"
+ depends on PCI
+ help
+ This option enables support for Acard.
+
+ If unsure, say N.
+
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 2b67c900a45..27291aad6ca 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ATA) += libata.o
# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
+obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
new file mode 100644
index 00000000000..339c210f03a
--- /dev/null
+++ b/drivers/ata/acard-ahci.c
@@ -0,0 +1,528 @@
+
+/*
+ * acard-ahci.c - ACard AHCI SATA support
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2010 Red Hat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/gfp.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include "ahci.h"
+
+#define DRV_NAME "acard-ahci"
+#define DRV_VERSION "1.0"
+
+/*
+ Received FIS structure limited to 80h.
+*/
+
+#define ACARD_AHCI_RX_FIS_SZ 128
+
+enum {
+ AHCI_PCI_BAR = 5,
+};
+
+enum board_ids {
+ board_acard_ahci,
+};
+
+struct acard_sg {
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 reserved;
+ __le32 size; /* bit 31 (EOT) max==0x10000 (64k) */
+};
+
+static void acard_ahci_qc_prep(struct ata_queued_cmd *qc);
+static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
+static int acard_ahci_port_start(struct ata_port *ap);
+static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+
+#ifdef CONFIG_PM
+static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int acard_ahci_pci_device_resume(struct pci_dev *pdev);
+#endif
+
+static struct scsi_host_template acard_ahci_sht = {
+ AHCI_SHT("acard-ahci"),
+};
+
+static struct ata_port_operations acard_ops = {
+ .inherits = &ahci_ops,
+ .qc_prep = acard_ahci_qc_prep,
+ .qc_fill_rtf = acard_ahci_qc_fill_rtf,
+ .port_start = acard_ahci_port_start,
+};
+
+#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
+
+static const struct ata_port_info acard_ahci_port_info[] = {
+ [board_acard_ahci] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &acard_ops,
+ },
+};
+
+static const struct pci_device_id acard_ahci_pci_tbl[] = {
+ /* ACard */
+ { PCI_VDEVICE(ARTOP, 0x000d), board_acard_ahci }, /* ATP8620 */
+
+ { } /* terminate list */
+};
+
+static struct pci_driver acard_ahci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = acard_ahci_pci_tbl,
+ .probe = acard_ahci_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = acard_ahci_pci_device_suspend,
+ .resume = acard_ahci_pci_device_resume,
+#endif
+};
+
+#ifdef CONFIG_PM
+static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (mesg.event & PM_EVENT_SUSPEND &&
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ if (mesg.event & PM_EVENT_SLEEP) {
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ return ata_pci_device_suspend(pdev, mesg);
+}
+
+static int acard_ahci_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
+static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
+{
+ int rc;
+
+ if (using_dac &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+ return 0;
+}
+
+static void acard_ahci_pci_print_info(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ u16 cc;
+ const char *scc_s;
+
+ pci_read_config_word(pdev, 0x0a, &cc);
+ if (cc == PCI_CLASS_STORAGE_IDE)
+ scc_s = "IDE";
+ else if (cc == PCI_CLASS_STORAGE_SATA)
+ scc_s = "SATA";
+ else if (cc == PCI_CLASS_STORAGE_RAID)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
+ ahci_print_info(host, scc_s);
+}
+
+static unsigned int acard_ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
+{
+ struct scatterlist *sg;
+ struct acard_sg *acard_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
+ unsigned int si, last_si = 0;
+
+ VPRINTK("ENTER\n");
+
+ /*
+ * Next, the S/G list.
+ */
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ dma_addr_t addr = sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ /*
+ * ACard note:
+ * We must set an end-of-table (EOT) bit,
+ * and the segment cannot exceed 64k (0x10000)
+ */
+ acard_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
+ acard_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ acard_sg[si].size = cpu_to_le32(sg_len);
+ last_si = si;
+ }
+
+ acard_sg[last_si].size |= cpu_to_le32(1 << 31); /* set EOT */
+
+ return si;
+}
+
+static void acard_ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
+ void *cmd_tbl;
+ u32 opts;
+ const u32 cmd_fis_len = 5; /* five dwords */
+ unsigned int n_elem;
+
+ /*
+ * Fill in command table information. First, the header,
+ * a SATA Register - Host to Device command FIS.
+ */
+ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
+
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
+ if (is_atapi) {
+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
+ }
+
+ n_elem = 0;
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ n_elem = acard_ahci_fill_sg(qc, cmd_tbl);
+
+ /*
+ * Fill in command slot information.
+ *
+ * ACard note: prd table length not filled in
+ */
+ opts = cmd_fis_len | (qc->dev->link->pmp << 12);
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+ if (is_atapi)
+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
+
+ ahci_fill_cmd_slot(pp, qc->tag, opts);
+}
+
+static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u8 *rx_fis = pp->rx_fis;
+
+ if (pp->fbs_enabled)
+ rx_fis += qc->dev->link->pmp * ACARD_AHCI_RX_FIS_SZ;
+
+ /*
+ * After a successful execution of an ATA PIO data-in command,
+ * the device doesn't send D2H Reg FIS to update the TF and
+ * the host should take TF and E_Status from the preceding PIO
+ * Setup FIS.
+ */
+ if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
+ !(qc->flags & ATA_QCFLAG_FAILED)) {
+ ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
+ qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
+ } else
+ ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
+
+ return true;
+}
+
+static int acard_ahci_port_start(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct device *dev = ap->host->dev;
+ struct ahci_port_priv *pp;
+ void *mem;
+ dma_addr_t mem_dma;
+ size_t dma_sz, rx_fis_sz;
+
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ /* check FBS capability */
+ if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd = readl(port_mmio + PORT_CMD);
+ if (cmd & PORT_CMD_FBSCP)
+ pp->fbs_supported = true;
+ else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
+ dev_printk(KERN_INFO, dev,
+ "port %d can do FBS, forcing FBSCP\n",
+ ap->port_no);
+ pp->fbs_supported = true;
+ } else
+ dev_printk(KERN_WARNING, dev,
+ "port %d is not capable of FBS\n",
+ ap->port_no);
+ }
+
+ if (pp->fbs_supported) {
+ dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
+ rx_fis_sz = ACARD_AHCI_RX_FIS_SZ * 16;
+ } else {
+ dma_sz = AHCI_PORT_PRIV_DMA_SZ;
+ rx_fis_sz = ACARD_AHCI_RX_FIS_SZ;
+ }
+
+ mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
+ if (!mem)
+ return -ENOMEM;
+ memset(mem, 0, dma_sz);
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot = mem;
+ pp->cmd_slot_dma = mem_dma;
+
+ mem += AHCI_CMD_SLOT_SZ;
+ mem_dma += AHCI_CMD_SLOT_SZ;
+
+ /*
+ * Second item: Received-FIS area
+ */
+ pp->rx_fis = mem;
+ pp->rx_fis_dma = mem_dma;
+
+ mem += rx_fis_sz;
+ mem_dma += rx_fis_sz;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = mem;
+ pp->cmd_tbl_dma = mem_dma;
+
+ /*
+ * Save off initial list of interrupts to be enabled.
+ * This could be changed later
+ */
+ pp->intr_mask = DEF_PORT_IRQ;
+
+ ap->private_data = pp;
+
+ /* engage engines, captain */
+ return ahci_port_resume(ap);
+}
+
+static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = acard_ahci_port_info[board_id];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ata_host *host;
+ int n_ports, i, rc;
+
+ VPRINTK("ENTER\n");
+
+ WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ /* acquire resources */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
+ pci_enable_msi(pdev);
+
+ hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+
+ /* save initial config */
+ ahci_save_initial_config(&pdev->dev, hpriv, 0, 0);
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR,
+ 0x100 + ap->port_no * 0x80, "port");
+
+ /* set initial link pm policy */
+ /*
+ ap->pm_policy = NOT_AVAILABLE;
+ */
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ /* initialize adapter */
+ rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
+ if (rc)
+ return rc;
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ acard_ahci_pci_print_info(host);
+
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+ &acard_ahci_sht);
+}
+
+static int __init acard_ahci_init(void)
+{
+ return pci_register_driver(&acard_ahci_pci_driver);
+}
+
+static void __exit acard_ahci_exit(void)
+{
+ pci_unregister_driver(&acard_ahci_pci_driver);
+}
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("ACard AHCI SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(acard_ahci_init);
+module_exit(acard_ahci_exit);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 329cbbb9128..3e606c34f57 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -311,6 +311,8 @@ extern struct device_attribute *ahci_sdev_attrs[];
extern struct ata_port_operations ahci_ops;
+void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts);
void ahci_save_initial_config(struct device *dev,
struct ahci_host_priv *hpriv,
unsigned int force_port_map,
@@ -326,6 +328,7 @@ int ahci_stop_engine(struct ata_port *ap);
void ahci_start_engine(struct ata_port *ap);
int ahci_check_ready(struct ata_link *link);
int ahci_kick_engine(struct ata_port *ap);
+int ahci_port_resume(struct ata_port *ap);
void ahci_set_em_messages(struct ahci_host_priv *hpriv,
struct ata_port_info *pi);
int ahci_reset_em(struct ata_host *host);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ebc08d65b3d..26d452339e9 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -87,10 +87,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
static void ahci_postreset(struct ata_link *link, unsigned int *class);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
-static int ahci_port_resume(struct ata_port *ap);
static void ahci_dev_config(struct ata_device *dev);
-static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
- u32 opts);
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
#endif
@@ -1133,8 +1130,8 @@ static unsigned int ahci_dev_classify(struct ata_port *ap)
return ata_dev_classify(&tf);
}
-static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
- u32 opts)
+void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts)
{
dma_addr_t cmd_tbl_dma;
@@ -1145,6 +1142,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
}
+EXPORT_SYMBOL_GPL(ahci_fill_cmd_slot);
int ahci_kick_engine(struct ata_port *ap)
{
@@ -1918,7 +1916,7 @@ static void ahci_pmp_detach(struct ata_port *ap)
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
}
-static int ahci_port_resume(struct ata_port *ap)
+int ahci_port_resume(struct ata_port *ap)
{
ahci_power_up(ap);
ahci_start_port(ap);
@@ -1930,6 +1928,7 @@ static int ahci_port_resume(struct ata_port *ap)
return 0;
}
+EXPORT_SYMBOL_GPL(ahci_port_resume);
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)