/* * SA-1101.h * * Copyright (c) Peter Danielsson 1999 * * Definition of constants related to the sa1101 * support chip for the sa1100 * */ /* Be sure that virtual mapping is defined right */ #ifndef __ASM_ARCH_HARDWARE_H #error You must include hardware.h not SA-1101.h #endif #ifndef SA1101_BASE #error You must define SA-1101 physical base address #endif #ifndef LANGUAGE # ifdef __ASSEMBLY__ # define LANGUAGE Assembly # else # define LANGUAGE C # endif #endif /* * We have mapped the sa1101 depending on the value of SA1101_BASE. * It then appears from 0xf4000000. */ #define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000) #define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE) #ifndef SA1101_p2v #define SA1101_p2v(PhAdd) (PhAdd) #endif #include #define C 0 #define Assembly 1 /* * Memory map */ #define __SHMEM_CONTROL0 0x00000000 #define __SYSTEM_CONTROL1 0x00000400 #define __ARBITER 0x00020000 #define __SYSTEM_CONTROL2 0x00040000 #define __SYSTEM_CONTROL3 0x00060000 #define __PARALLEL_PORT 0x00080000 #define __VIDMEM_CONTROL 0x00100000 #define __UPDATE_FIFO 0x00120000 #define __SHMEM_CONTROL1 0x00140000 #define __INTERRUPT_CONTROL 0x00160000 #define __USB_CONTROL 0x00180000 #define __TRACK_INTERFACE 0x001a0000 #define __MOUSE_INTERFACE 0x001b0000 #define __KEYPAD_INTERFACE 0x001c0000 #define __PCMCIA_INTERFACE 0x001e0000 #define __VGA_CONTROL 0x00200000 #define __GPIO_INTERFACE 0x00300000 /* * Macro that calculates real address for registers in the SA-1101 */ #define _SA1101( x ) ((x) + SA1101_BASE) /* * Interface and shared memory controller registers * * Registers * SKCR SA-1101 control register (read/write) * SMCR Shared Memory Controller Register * SNPR Snoop Register */ #define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */ #define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */ #define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */ #if LANGUAGE == C #define SKCR (*((volatile Word *) SA1101_p2v (_SKCR))) #define SMCR (*((volatile Word *) SA1101_p2v (_SMCR))) #define SNPR (*((volatile Word *) SA1101_p2v (_SNPR))) #define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */ #define SKCR_BCLKEn 0x0002 /* Enables BCLK */ #define SKCR_Sleep 0x0004 /* Sleep Mode */ #define SKCR_IRefEn 0x0008 /* DAC Iref input enable */ #define SKCR_VCOON 0x0010 /* VCO bias */ #define SKCR_ScanTestEn 0x0020 /* Enables scan test */ #define SKCR_ClockTestEn 0x0040 /* Enables clock test */ #define SMCR_DCAC Fld(2,0) /* Number of column address bits */ #define SMCR_DRAC Fld(2,2) /* Number of row address bits */ #define SMCR_ArbiterBias 0x0008 /* favor video or USB */ #define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */ #define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \ (( (x) - 8 ) << FShft (SMCR_DCAC)) #define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\ (( (x) - 9 ) << FShft (SMCR_DRAC)) #define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */ #define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */ #define SNPR_WholeBank (1 << 23) /* Whole bank bit */ #define SNPR_BankSelect Fld(2,27) /* Bank select */ #define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */ #define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \ ( (x) << FShft (SNPR_VFBsize)) #define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \ (( (x) + 1 ) << FShft (SNPR_BankSelect )) #endif /* LANGUAGE == C */ /* * Video Memory Controller * * Registers * VMCCR Configuration register * VMCAR VMC address register * VMCDR VMC data register * */ #define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */ #define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */ #define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */ #if LANGUAGE == C #define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR))) #define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR))) #define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR))) #define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */ #define VMCCR_Config 0x0001 /* DRAM size */ #define VMCCR_RefPeriod Fld(2,3) /* Refresh period */ #define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */ #define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/ #define VMCCR_RefTest (1<<10) /* refresh test */ #define VMCCR_RefLow Fld(6,11) /* refresh low counter */ #define VMCCR_RefHigh Fld(7,17) /* refresh high counter */ #define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */ #define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */ #endif LANGUAGE == C /* Update FIFO * * Registers * UFCR Update FIFO Control Register * UFSR Update FIFO Status Register * UFLVLR update FIFO level register * UFDR update FIFO data register */ #define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */ #define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */ #define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */ #define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */ #if LANGUAGE == C #define UFCR (*((volatile Word *) SA1101_p2v (_UFCR))) #define UFSR (*((volatile Word *) SA1101_p2v (_UFSR))) #define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR))) #define UFDR (*((volatile Word *) SA1101_p2v (_UFDR))) #define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */ #define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */ #endif /* LANGUAGE == C */ /* System Controller * * Registers * SKPCR Power Control Register * SKCDR Clock Divider Register * DACDR1 DAC1 Data register * DACDR2 DAC2 Data register */ #define _SKPCR _SA1101(0x00000400) #define _SKCDR _SA1101(0x00040000) #define _DACDR1 _SA1101(0x00060000) #define _DACDR2 _SA1101(0x00060400) #if LANGUAGE == C #define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR))) #define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR))) #define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1))) #define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2))) #define SKPCR_UCLKEn 0x01 /* USB Enable */ #define SKPCR_PCLKEn 0x02 /* PS/2 Enable */ #define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */ #define SKPCR_VCLKEn 0x08 /* Video Controller Enable */ #define SKPCR_PICLKEn 0x10 /* parallel port Enable */ #define SKPCR_DCLKEn 0x20 /* DACs Enable */ #define SKPCR_nKPADEn 0x40 /* Multiplexer */ #define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */ #define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */ #define SKDCR_BCLKEn (1<<9) /* BCLK Divider */ #define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */ #define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */ #define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */ #define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */ #define SKDCR_ChargePump (1<<25) /* Charge pump control */ #define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */ #define SKDCR_ClkTestEn (1<<27) /* Test clock generator */ #define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */ #define DACDR_DACCount Fld(8,0) /* Count value */ #define DACDR1_DACCount DACDR_DACCount #define DACDR2_DACCount DACDR_DACCount #endif /* LANGUAGE == C */ /* * Parallel Port Interface * * Registers * IEEE_Config IEEE mode selection and programmable attributes * IEEE_Control Controls the states of IEEE port control outputs * IEEE_Data Forward transfer data register * IEEE_Addr Forward transfer address register * IEEE_Status Port IO signal status register * IEEE_IntStatus Port interrupts status register * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels * IEEE_InitTime Forward timeout counter initial value * IEEE_TimerStatus Forward timeout counter current value * IEEE_FifoReset Reset forward transfer FIFO * IEEE_ReloadValue Counter reload value * IEEE_TestControl Control testmode * IEEE_TestDataIn Test data register * IEEE_TestDataInEn Enable test data * IEEE_TestCtrlIn Test control signals * IEEE_TestCtrlInEn Enable test control signals * IEEE_TestDataStat Current data bus value * */ /* * The control registers are defined as offsets from a base address */ #define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT ) #define _IEEE_Config _IEEE( 0x0000 ) #define _IEEE_Control _IEEE( 0x0400 ) #define _IEEE_Data _IEEE( 0x4000 ) #define _IEEE_Addr _IEEE( 0x0800 ) #define _IEEE_Status _IEEE( 0x0c00 ) #define _IEEE_IntStatus _IEEE( 0x1000 ) #define _IEEE_FifoLevels _IEEE( 0x1400 ) #define _IEEE_InitTime _IEEE( 0x1800 ) #define _IEEE_TimerStatus _IEEE( 0x1c00 ) #define _IEEE_FifoReset _IEEE( 0x2000 ) #define _IEEE_ReloadValue _IEEE( 0x3c00 ) #define _IEEE_TestControl _IEEE( 0x2400 ) #define _IEEE_TestDataIn _IEEE( 0x2800 ) #define _IEEE_TestDataInEn _IEEE( 0x2c00 ) #define _IEEE_TestCtrlIn _IEEE( 0x3000 ) #define _IEEE_TestCtrlInEn _IEEE( 0x3400 ) #define _IEEE_TestDataStat _IEEE( 0x3800 ) #if LANGUAGE == C #define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config))) #define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control))) #define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data))) #define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr))) #define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status))) #define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus))) #define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels))) #define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime))) #define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus))) #define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset))) #define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue))) #define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl))) #define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn))) #define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn))) #define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn))) #define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn))) #define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat))) #define IEEE_Config_M Fld(3,0) /* Mode select */ #define IEEE_Config_D 0x04 /* FIFO access enable */ #define IEEE_Config_B 0x08 /* 9-bit word enable */ #define IEEE_Config_T 0x10 /* Data transfer enable */ #define IEEE_Config_A 0x20 /* Data transfer direction */ #define IEEE_Config_E 0x40 /* Timer enable */ #define IEEE_Control_A 0x08 /* AutoFd output */ #define IEEE_Control_E 0x04 /* Selectin output */ #define IEEE_Control_T 0x02 /* Strobe output */ #define IEEE_Control_I 0x01 /* Port init output */ #define IEEE_Data_C (1<<31) /* Byte count */ #define IEEE_Data_Db Fld(9,16) /* Data byte 2 */ #define IEEE_Data_Da Fld(9,0) /* Data byte 1 */ #define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */ #define IEEE_Status_A 0x0100 /* nAutoFd port output status */ #define IEEE_Status_E 0x0080 /* nSelectIn port output status */ #define IEEE_Status_T 0x0040 /* nStrobe port output status */ #define IEEE_Status_I 0x0020 /* nInit port output status */ #define IEEE_Status_B 0x0010 /* Busy port inout status */ #define IEEE_Status_S 0x0008 /* Select port input status */ #define IEEE_Status_K 0x0004 /* nAck port input status */ #define IEEE_Status_F 0x0002 /* nFault port input status */ #define IEEE_Status_R 0x0001 /* pError port input status */ #define IEEE_IntStatus_IntReqDat 0x0100 #define IEEE_IntStatus_IntReqEmp 0x0080 #define IEEE_IntStatus_IntReqInt 0x0040 #define IEEE_IntStatus_IntReqRav 0x0020 #define IEEE_IntStatus_IntReqTim 0x0010 #define IEEE_IntStatus_RevAddrComp 0x0008 #define IEEE_IntStatus_RevDataComp 0x0004 #define IEEE_IntStatus_FwdAddrComp 0x0002 #define IEEE_IntStatus_FwdDataComp 0x0001 #define IEEE_FifoLevels_RevFifoLevel 2 #define IEEE_FifoLevels_FwdFifoLevel 1 #define IEEE_InitTime_TimValInit Fld(22,0) #define IEEE_TimerStatus_TimValStat Fld(22,0) #define IEEE_ReloadValue_Reload Fld(4,0) #define IEEE_TestControl_RegClk 0x04 #define IEEE_TestControl_ClockSelect Fld(2,1) #define IEEE_TestControl_TimerTestModeEn 0x01 #define IEEE_TestCtrlIn_PError 0x10 #define IEEE_TestCtrlIn_nFault 0x08 #define IEEE_TestCtrlIn_nAck 0x04 #define IEEE_TestCtrlIn_PSel 0x02 #define IEEE_TestCtrlIn_Busy 0x01 #endif /* LANGUAGE == C */ /* * VGA Controller * * Registers * VideoControl Video Control Register * VgaTiming0 VGA Timing Register 0 * VgaTiming1 VGA Timing Register 1 * VgaTiming2 VGA Timing Register 2 * VgaTiming3 VGA Timing Register 3 * VgaBorder VGA Border Color Register * VgaDBAR VGADMA Base Address Register * VgaDCAR VGADMA Channel Current Address Register * VgaStatus VGA Status Register * VgaInterruptMask VGA Interrupt Mask Register * VgaPalette VGA Palette Registers * DacControl DAC Control Register * VgaTest VGA Controller Test Register */ #define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL ) #define _VideoControl _VGA( 0x0000 ) #define _VgaTiming0 _VGA( 0x0400 ) #define _VgaTiming1 _VGA( 0x0800 ) #define _VgaTiming2 _VGA( 0x0c00 ) #define _VgaTiming3 _VGA( 0x1000 ) #define _VgaBorder _VGA( 0x1400 ) #define _VgaDBAR _VGA( 0x1800 ) #define _VgaDCAR _VGA( 0x1c00 ) #define _VgaStatus _VGA( 0x2000 ) #define _VgaInterruptMask _VGA( 0x2400 ) #define _VgaPalette _VGA( 0x40000 ) #define _DacControl _VGA( 0x3000 ) #define _VgaTest _VGA( 0x2c00 ) #if (LANGUAGE == C) #define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl))) #define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0))) #define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1))) #define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2))) #define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3))) #define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder))) #define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR))) #define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR))) #define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus))) #define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask))) #define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette))) #define DacControl (*((volatile Word *) SA1101_p2v (_DacControl))) #define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest))) #define VideoControl_VgaEn 0x00000000 #define VideoControl_BGR 0x00000001 #define VideoControl_VCompVal Fld(2,2) #define VideoControl_VgaReq Fld(4,4) #define VideoControl_VBurstL Fld(4,8) #define VideoControl_VMode (1<<12) #define VideoControl_PalRead (1<<13) #define VgaTiming0_PPL Fld(6,2) #define VgaTiming0_HSW Fld(8,8) #define VgaTiming0_HFP Fld(8,16) #define VgaTiming0_HBP Fld(8,24) #define VgaTiming1_LPS Fld(10,0) #define VgaTiming1_VSW Fld(6,10) #define VgaTiming1_VFP Fld(8,16) #define VgaTiming1_VBP Fld(8,24) #define VgaTiming2_IVS 0x01 #define VgaTiming2_IHS 0x02 #define VgaTiming2_CVS 0x04 #define VgaTiming2_CHS 0x08 #define VgaTiming3_HBS Fld(8,0) #define VgaTiming3_HBE Fld(8,8) #define VgaTiming3_VBS Fld(8,16) #define VgaTiming3_VBE Fld(8,24) #define VgaBorder_BCOL Fld(24,0) #define VgaStatus_VFUF 0x01 #define VgaStatus_VNext 0x02 #define VgaStatus_VComp 0x04 #define VgaInterruptMask_VFUFMask 0x00 #define VgaInterruptMask_VNextMask 0x01 #define VgaInterruptMask_VCompMask 0x02 #define VgaPalette_R Fld(8,0) #define VgaPalette_G Fld(8,8) #define VgaPalette_B Fld(8,16) #define DacControl_DACON 0x0001 #define DacControl_COMPON 0x0002 #define DacControl_PEDON 0x0004 #define DacControl_RTrim Fld(5,4) #define DacControl_GTrim Fld(5,9) #define DacControl_BTrim Fld(5,14) #define VgaTest_TDAC 0x00 #define VgaTest_Datatest Fld(4,1) #define VgaTest_DACTESTDAC 0x10 #define VgaTest_DACTESTOUT Fld(3,5) #endif /* LANGUAGE == C */ /* * USB Host Interface Controller * * Registers * Revision * Control * CommandStatus * InterruptStatus * InterruptEnable * HCCA * PeriodCurrentED * ControlHeadED * BulkHeadED * BulkCurrentED * DoneHead * FmInterval * FmRemaining * FmNumber * PeriodicStart * LSThreshold * RhDescriptorA * RhDescriptorB * RhStatus * RhPortStatus * USBStatus * USBReset * USTAR * USWER * USRFR * USNFR * USTCSR * USSR * */ #define _USB( x ) _SA1101( ( x ) + __USB_CONTROL ) #define _Revision _USB( 0x0000 ) #define _Control _USB( 0x0888 ) #define _CommandStatus _USB( 0x0c00 ) #define _InterruptStatus _USB( 0x1000 ) #define _InterruptEnable _USB( 0x1400 ) #define _HCCA _USB( 0x1800 ) #define _PeriodCurrentED _USB( 0x1c00 ) #define _ControlHeadED _USB( 0x2000 ) #define _BulkHeadED _USB( 0x2800 ) #define _BulkCurrentED _USB( 0x2c00 ) #define _DoneHead _USB( 0x3000 ) #define _FmInterval _USB( 0x3400 ) #define _FmRemaining _USB( 0x3800 ) #define _FmNumber _USB( 0x3c00 ) #define _PeriodicStart _USB( 0x4000 ) #define _LSThreshold _USB( 0x4400 ) #define _RhDescriptorA _USB( 0x4800 ) #define _RhDescriptorB _USB( 0x4c00 ) #define _RhStatus _USB( 0x5000 ) #define _RhPortStatus _USB( 0x5400 ) #define _USBStatus _USB( 0x11800 ) #define _USBReset _USB( 0x11c00 ) #define _USTAR _USB( 0x10400 ) #define _USWER _USB( 0x10800 ) #define _USRFR _USB( 0x10c00 ) #define _USNFR _USB( 0x11000 ) #define _USTCSR _USB( 0x11400 ) #define _USSR _USB( 0x11800 ) #if (LANGUAGE == C) #define Revision (*((volatile Word *) SA1101_p2v (_Revision))) #define Control (*((volatile Word *) SA1101_p2v (_Control))) #define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus))) #define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus))) #define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable))) #define HCCA (*((volatile Word *) SA1101_p2v (_HCCA))) #define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED))) #define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED))) #define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED))) #define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED))) #define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead))) #define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval))) #define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining))) #define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber))) #define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart))) #define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold))) #define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA))) #define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB))) #define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus))) #define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus))) #define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus))) #define USBReset (*((volatile Word *) SA1101_p2v (_USBReset))) #define USTAR (*((volatile Word *) SA1101_p2v (_USTAR))) #define USWER (*((volatile Word *) SA1101_p2v (_USWER))) #define USRFR (*((volatile Word *) SA1101_p2v (_USRFR))) #define USNFR (*((volatile Word *) SA1101_p2v (_USNFR))) #define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR))) #define USSR (*((volatile Word *) SA1101_p2v (_USSR))) #define USBStatus_IrqHciRmtWkp (1<<7) #define USBStatus_IrqHciBuffAcc (1<<8) #define USBStatus_nIrqHciM (1<<9) #define USBStatus_nHciMFClr (1<<10) #define USBReset_ForceIfReset 0x01 #define USBReset_ForceHcReset 0x02 #define USBReset_ClkGenReset 0x04 #define USTCR_RdBstCntrl Fld(3,0) #define USTCR_ByteEnable Fld(4,3) #define USTCR_WriteEn (1<<7) #define USTCR_FifoCir (1<<8) #define USTCR_TestXferSel (1<<9) #define USTCR_FifoCirAtEnd (1<<10) #define USTCR_nSimScaleDownClk (1<<11) #define USSR_nAppMDEmpty 0x01 #define USSR_nAppMDFirst 0x02 #define USSR_nAppMDLast 0x04 #define USSR_nAppMDFull 0x08 #define USSR_nAppMAFull 0x10 #define USSR_XferReq 0x20 #define USSR_XferEnd 0x40 #endif /* LANGUAGE == C */ /* * Interrupt Controller * * Registers * INTTEST0 Test register 0 * INTTEST1 Test register 1 * INTENABLE0 Interrupt Enable register 0 * INTENABLE1 Interrupt Enable register 1 * INTPOL0 Interrupt Polarity selection 0 * INTPOL1 Interrupt Polarity selection 1 * INTTSTSEL Interrupt source selection * INTSTATCLR0 Interrupt Status 0 * INTSTATCLR1 Interrupt Status 1 * INTSET0 Interrupt Set 0 * INTSET1 Interrupt Set 1 */ #define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL) #define _INTTEST0 _INT( 0x1000 ) #define _INTTEST1 _INT( 0x1400 ) #define _INTENABLE0 _INT( 0x2000 ) #define _INTENABLE1 _INT( 0x2400 ) #define _INTPOL0 _INT( 0x3000 ) #define _INTPOL1 _INT( 0x3400 ) #define _INTTSTSEL _INT( 0x5000 ) #define _INTSTATCLR0 _INT( 0x6000 ) #define _INTSTATCLR1 _INT( 0x6400 ) #define _INTSET0 _INT( 0x7000 ) #define _INTSET1 _INT( 0x7400 ) #if ( LANGUAGE == C ) #define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0))) #define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1))) #define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0))) #define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1))) #define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0))) #define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1))) #define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL))) #define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0))) #define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1))) #define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0))) #define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1))) #endif /* LANGUAGE == C */ /* * PS/2 Trackpad and Mouse Interfaces * * Registers (prefix kbd applies to trackpad interface, mse to mouse) * KBDCR Control Register * KBDSTAT Status Register * KBDDATA Transmit/Receive Data register * KBDCLKDIV Clock Division Register * KBDPRECNT Clock Precount Register * KBDTEST1 Test register 1 * KBDTEST2 Test register 2 * KBDTEST3 Test register 3 * KBDTEST4 Test register 4 * MSECR * MSESTAT * MSEDATA * MSECLKDIV * MSEPRECNT * MSETEST1 * MSETEST2 * MSETEST3 * MSETEST4 * */ #define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE ) #define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE ) #define _KBDCR _KBD( 0x0000 ) #define _KBDSTAT _KBD( 0x0400 ) #define _KBDDATA _KBD( 0x0800 ) #define _KBDCLKDIV _KBD( 0x0c00 ) #define _KBDPRECNT _KBD( 0x1000 ) #define _KBDTEST1 _KBD( 0x2000 ) #define _KBDTEST2 _KBD( 0x2400 ) #define _KBDTEST3 _KBD( 0x2800 ) #define _KBDTEST4 _KBD( 0x2c00 ) #define _MSECR _MSE( 0x0000 ) #define _MSESTAT _MSE( 0x0400 ) #define _MSEDATA _MSE( 0x0800 ) #define _MSECLKDIV _MSE( 0x0c00 ) #define _MSEPRECNT _MSE( 0x1000 ) #define _MSETEST1 _MSE( 0x2000 ) #define _MSETEST2 _MSE( 0x2400 ) #define _MSETEST3 _MSE( 0x2800 ) #define _MSETEST4 _MSE( 0x2c00 ) #if ( LANGUAGE == C ) #define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR))) #define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT))) #define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA))) #define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV))) #define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT))) #define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1))) #define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2))) #define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3))) #define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4))) #define MSECR (*((volatile Word *) SA1101_p2v (_MSECR))) #define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT))) #define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA))) #define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV))) #define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT))) #define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1))) #define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2))) #define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3))) #define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4))) #define KBDCR_ENA 0x08 #define KBDCR_FKD 0x02 #define KBDCR_FKC 0x01 #define KBDSTAT_TXE 0x80 #define KBDSTAT_TXB 0x40 #define KBDSTAT_RXF 0x20 #define KBDSTAT_RXB 0x10 #define KBDSTAT_ENA 0x08 #define KBDSTAT_RXP 0x04 #define KBDSTAT_KBD 0x02 #define KBDSTAT_KBC 0x01 #define KBDCLKDIV_DivVal Fld(4,0) #define MSECR_ENA 0x08 #define MSECR_FKD 0x02 #define MSECR_FKC 0x01 #define MSESTAT_TXE 0x80 #define MSESTAT_TXB 0x40 #define MSESTAT_RXF 0x20 #define MSESTAT_RXB 0x10 #define MSESTAT_ENA 0x08 #define MSESTAT_RXP 0x04 #define MSESTAT_MSD 0x02 #define MSESTAT_MSC 0x01 #define MSECLKDIV_DivVal Fld(4,0) #define KBDTEST1_CD 0x80 #define KBDTEST1_RC1 0x40 #define KBDTEST1_MC 0x20 #define KBDTEST1_C Fld(2,3) #define KBDTEST1_T2 0x40 #define KBDTEST1_T1 0x20 #define KBDTEST1_T0 0x10 #define KBDTEST2_TICBnRES 0x08 #define KBDTEST2_RKC 0x04 #define KBDTEST2_RKD 0x02 #define KBDTEST2_SEL 0x01 #define KBDTEST3_ms_16 0x80 #define KBDTEST3_us_64 0x40 #define KBDTEST3_us_16 0x20 #define KBDTEST3_DIV8 0x10 #define KBDTEST3_DIn 0x08 #define KBDTEST3_CIn 0x04 #define KBDTEST3_KD 0x02 #define KBDTEST3_KC 0x01 #define KBDTEST4_BC12 0x80 #define KBDTEST4_BC11 0x40 #define KBDTEST4_TRES 0x20 #define KBDTEST4_CLKOE 0x10 #define KBDTEST4_CRES 0x08 #define KBDTEST4_RXB 0x04 #define KBDTEST4_TXB 0x02 #define KBDTEST4_SRX 0x01 #define MSETEST1_CD 0x80 #define MSETEST1_RC1 0x40 #define MSETEST1_MC 0x20 #define MSETEST1_C Fld(2,3) #define MSETEST1_T2 0x40 #define MSETEST1_T1 0x20 #define MSETEST1_T0 0x10 #define MSETEST2_TICBnRES 0x08 #define MSETEST2_RKC 0x04 #define MSETEST2_RKD 0x02 #define MSETEST2_SEL 0x01 #define MSETEST3_ms_16 0x80 #define MSETEST3_us_64 0x40 #define MSETEST3_us_16 0x20 #define MSETEST3_DIV8 0x10 #define MSETEST3_DIn 0x08 #define MSETEST3_CIn 0x04 #define MSETEST3_KD 0x02 #define MSETEST3_KC 0x01 #define MSETEST4_BC12 0x80 #define MSETEST4_BC11 0x40 #define MSETEST4_TRES 0x20 #define MSETEST4_CLKOE 0x10 #define MSETEST4_CRES 0x08 #define MSETEST4_RXB 0x04 #define MSETEST4_TXB 0x02 #define MSETEST4_SRX 0x01 #endif /* LANGUAGE == C */ /* * General-Purpose I/O Interface * * Registers * PADWR Port A Data Write Register * PBDWR Port B Data Write Register * PADRR Port A Data Read Register * PBDRR Port B Data Read Register * PADDR Port A Data Direction Register * PBDDR Port B Data Direction Register * PASSR Port A Sleep State Register * PBSSR Port B Sleep State Register * */ #define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE ) #define _PADWR _PIO( 0x0000 ) #define _PBDWR _PIO( 0x0400 ) #define _PADRR _PIO( 0x0000 ) #define _PBDRR _PIO( 0x0400 ) #define _PADDR _PIO( 0x0800 ) #define _PBDDR _PIO( 0x0c00 ) #define _PASSR _PIO( 0x1000 ) #define _PBSSR _PIO( 0x1400 ) #if ( LANGUAGE == C ) #define PADWR (*((volatile Word *) SA1101_p2v (_PADWR))) #define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR))) #define PADRR (*((volatile Word *) SA1101_p2v (_PADRR))) #define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR))) #define PADDR (*((volatile Word *) SA1101_p2v (_PADDR))) #define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR))) #define PASSR (*((volatile Word *) SA1101_p2v (_PASSR))) #define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR))) #endif /* * Keypad Interface * * Registers * PXDWR * PXDRR * PYDWR * PYDRR * */ #define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE ) #define _PXDWR _KEYPAD( 0x0000 ) #define _PXDRR _KEYPAD( 0x0000 ) #define _PYDWR _KEYPAD( 0x0400 ) #define _PYDRR _KEYPAD( 0x0400 ) #if ( LANGUAGE == C ) #define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR))) #define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR))) #define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR))) #define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR))) #endif /* * PCMCIA Interface * * Registers * PCSR Status Register * PCCR Control Register * PCSSR Sleep State Register * */ #define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE ) #define _PCSR _CARD( 0x0000 ) #define _PCCR _CARD( 0x0400 ) #define _PCSSR _CARD( 0x0800 ) #if ( LANGUAGE == C ) #define PCSR (*((volatile Word *) SA1101_p2v (_PCSR))) #define PCCR (*((volatile Word *) SA1101_p2v (_PCCR))) #define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR))) #define PCSR_S0_ready 0x0001 #define PCSR_S1_ready 0x0002 #define PCSR_S0_detected 0x0004 #define PCSR_S1_detected 0x0008 #define PCSR_S0_VS1 0x0010 #define PCSR_S0_VS2 0x0020 #define PCSR_S1_VS1 0x0040 #define PCSR_S1_VS2 0x0080 #define PCSR_S0_WP 0x0100 #define PCSR_S1_WP 0x0200 #define PCSR_S0_BVD1_nSTSCHG 0x0400 #define PCSR_S0_BVD2_nSPKR 0x0800 #define PCSR_S1_BVD1_nSTSCHG 0x1000 #define PCSR_S1_BVD2_nSPKR 0x2000 #define PCCR_S0_VPP0 0x0001 #define PCCR_S0_VPP1 0x0002 #define PCCR_S0_VCC0 0x0004 #define PCCR_S0_VCC1 0x0008 #define PCCR_S1_VPP0 0x0010 #define PCCR_S1_VPP1 0x0020 #define PCCR_S1_VCC0 0x0040 #define PCCR_S1_VCC1 0x0080 #define PCCR_S0_reset 0x0100 #define PCCR_S1_reset 0x0200 #define PCCR_S0_float 0x0400 #define PCCR_S1_float 0x0800 #define PCSSR_S0_VCC0 0x0001 #define PCSSR_S0_VCC1 0x0002 #define PCSSR_S0_VPP0 0x0004 #define PCSSR_S0_VPP1 0x0008 #define PCSSR_S0_control 0x0010 #define PCSSR_S1_VCC0 0x0020 #define PCSSR_S1_VCC1 0x0040 #define PCSSR_S1_VPP0 0x0080 #define PCSSR_S1_VPP1 0x0100 #define PCSSR_S1_control 0x0200 #endif #undef C #undef Assembly