/* * fs/fs-writeback.c * * Copyright (C) 2002, Linus Torvalds. * * Contains all the functions related to writing back and waiting * upon dirty inodes against superblocks, and writing back dirty * pages against inodes. ie: data writeback. Writeout of the * inode itself is not handled here. * * 10Apr2002 akpm@zip.com.au * Split out of fs/inode.c * Additions for address_space-based writeback */ #include #include #include #include #include #include #include #include #include #include #include "internal.h" /** * writeback_acquire - attempt to get exclusive writeback access to a device * @bdi: the device's backing_dev_info structure * * It is a waste of resources to have more than one pdflush thread blocked on * a single request queue. Exclusion at the request_queue level is obtained * via a flag in the request_queue's backing_dev_info.state. * * Non-request_queue-backed address_spaces will share default_backing_dev_info, * unless they implement their own. Which is somewhat inefficient, as this * may prevent concurrent writeback against multiple devices. */ static int writeback_acquire(struct backing_dev_info *bdi) { return !test_and_set_bit(BDI_pdflush, &bdi->state); } /** * writeback_in_progress - determine whether there is writeback in progress * @bdi: the device's backing_dev_info structure. * * Determine whether there is writeback in progress against a backing device. */ int writeback_in_progress(struct backing_dev_info *bdi) { return test_bit(BDI_pdflush, &bdi->state); } /** * writeback_release - relinquish exclusive writeback access against a device. * @bdi: the device's backing_dev_info structure */ static void writeback_release(struct backing_dev_info *bdi) { BUG_ON(!writeback_in_progress(bdi)); clear_bit(BDI_pdflush, &bdi->state); } /** * __mark_inode_dirty - internal function * @inode: inode to mark * @flags: what kind of dirty (i.e. I_DIRTY_SYNC) * Mark an inode as dirty. Callers should use mark_inode_dirty or * mark_inode_dirty_sync. * * Put the inode on the super block's dirty list. * * CAREFUL! We mark it dirty unconditionally, but move it onto the * dirty list only if it is hashed or if it refers to a blockdev. * If it was not hashed, it will never be added to the dirty list * even if it is later hashed, as it will have been marked dirty already. * * In short, make sure you hash any inodes _before_ you start marking * them dirty. * * This function *must* be atomic for the I_DIRTY_PAGES case - * set_page_dirty() is called under spinlock in several places. * * Note that for blockdevs, inode->dirtied_when represents the dirtying time of * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of * the kernel-internal blockdev inode represents the dirtying time of the * blockdev's pages. This is why for I_DIRTY_PAGES we always use * page->mapping->host, so the page-dirtying time is recorded in the internal * blockdev inode. */ void __mark_inode_dirty(struct inode *inode, int flags) { struct super_block *sb = inode->i_sb; /* * Don't do this for I_DIRTY_PAGES - that doesn't actually * dirty the inode itself */ if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) { if (sb->s_op->dirty_inode) sb->s_op->dirty_inode(inode); } /* * make sure that changes are seen by all cpus before we test i_state * -- mikulas */ smp_mb(); /* avoid the locking if we can */ if ((inode->i_state & flags) == flags) return; if (unlikely(block_dump)) { struct dentry *dentry = NULL; const char *name = "?"; if (!list_empty(&inode->i_dentry)) { dentry = list_entry(inode->i_dentry.next, struct dentry, d_alias); if (dentry && dentry->d_name.name) name = (const char *) dentry->d_name.name; } if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) printk(KERN_DEBUG "%s(%d): dirtied inode %lu (%s) on %s\n", current->comm, task_pid_nr(current), inode->i_ino, name, inode->i_sb->s_id); } spin_lock(&inode_lock); if ((inode->i_state & flags) != flags) { const int was_dirty = inode->i_state & I_DIRTY; inode->i_state |= flags; /* * If the inode is being synced, just update its dirty state. * The unlocker will place the inode on the appropriate * superblock list, based upon its state. */ if (inode->i_state & I_SYNC) goto out; /* * Only add valid (hashed) inodes to the superblock's * dirty list. Add blockdev inodes as well. */ if (!S_ISBLK(inode->i_mode)) { if (hlist_unhashed(&inode->i_hash)) goto out; } if (inode->i_state & (I_FREEING|I_CLEAR)) goto out; /* * If the inode was already on s_dirty/s_io/s_more_io, don't * reposition it (that would break s_dirty time-ordering). */ if (!was_dirty) { inode->dirtied_when = jiffies; list_move(&inode->i_list, &sb->s_dirty); } } out: spin_unlock(&inode_lock); } EXPORT_SYMBOL(__mark_inode_dirty); static int write_inode(struct inode *inode, int sync) { if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode)) return inode->i_sb->s_op->write_inode(inode, sync); return 0; } /* * Redirty an inode: set its when-it-was dirtied timestamp and move it to the * furthest end of its superblock's dirty-inode list. * * Before stamping the inode's ->dirtied_when, we check to see whether it is * already the most-recently-dirtied inode on the s_dirty list. If that is * the case then the inode must have been redirtied while it was being written * out and we don't reset its dirtied_when. */ static void redirty_tail(struct inode *inode) { struct super_block *sb = inode->i_sb; if (!list_empty(&sb->s_dirty)) { struct inode *tail_inode; tail_inode = list_entry(sb->s_dirty.next, struct inode, i_list); if (!time_after_eq(inode->dirtied_when, tail_inode->dirtied_when)) inode->dirtied_when = jiffies; } list_move(&inode->i_list, &sb->s_dirty); } /* * requeue inode for re-scanning after sb->s_io list is exhausted. */ static void requeue_io(struct inode *inode) { list_move(&inode->i_list, &inode->i_sb->s_more_io); } static void inode_sync_complete(struct inode *inode) { /* * Prevent speculative execution through spin_unlock(&inode_lock); */ smp_mb(); wake_up_bit(&inode->i_state, __I_SYNC); } /* * Move expired dirty inodes from @delaying_queue to @dispatch_queue. */ static void move_expired_inodes(struct list_head *delaying_queue, struct list_head *dispatch_queue, unsigned long *older_than_this) { while (!list_empty(delaying_queue)) { struct inode *inode = list_entry(delaying_queue->prev, struct inode, i_list); if (older_than_this && time_after(inode->dirtied_when, *older_than_this)) break; list_move(&inode->i_list, dispatch_queue); } } /* * Queue all expired dirty inodes for io, eldest first. */ static void queue_io(struct super_block *sb, unsigned long *older_than_this) { list_splice_init(&sb->s_more_io, sb->s_io.prev); move_expired_inodes(&sb->s_dirty, &sb->s_io, older_than_this); } int sb_has_dirty_inodes(struct super_block *sb) { return !list_empty(&sb->s_dirty) || !list_empty(&sb->s_io) || !list_empty(&sb->s_more_io); } EXPORT_SYMBOL(sb_has_dirty_inodes); /* * Write a single inode's dirty pages and inode data out to disk. * If `wait' is set, wait on the writeout. * * The whole writeout design is quite complex and fragile. We want to avoid * starvation of particular inodes when others are being redirtied, prevent * livelocks, etc. * * Called under inode_lock. */ static int __sync_single_inode(struct inode *inode, struct writeback_control *wbc) { unsigned dirty; struct address_space *mapping = inode->i_mapping; int wait = wbc->sync_mode == WB_SYNC_ALL; int ret; BUG_ON(inode->i_state & I_SYNC); /* Set I_SYNC, reset I_DIRTY */ dirty = inode->i_state & I_DIRTY; inode->i_state |= I_SYNC; inode->i_state &= ~I_DIRTY; spin_unlock(&inode_lock); ret = do_writepages(mapping, wbc); /* Don't write the inode if only I_DIRTY_PAGES was set */ if (dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) { int err = write_inode(inode, wait); if (ret == 0) ret = err; } if (wait) { int err = filemap_fdatawait(mapping); if (ret == 0) ret = err; } spin_lock(&inode_lock); inode->i_state &= ~I_SYNC; if (!(inode->i_state & I_FREEING)) { if (!(inode->i_state & I_DIRTY) && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) { /* * We didn't write back all the pages. nfs_writepages() * sometimes bales out without doing anything. Redirty * the inode; Move it from s_io onto s_more_io/s_dirty. */ /* * akpm: if the caller was the kupdate function we put * this inode at the head of s_dirty so it gets first * consideration. Otherwise, move it to the tail, for * the reasons described there. I'm not really sure * how much sense this makes. Presumably I had a good * reasons for doing it this way, and I'd rather not * muck with it at present. */ if (wbc->for_kupdate) { /* * For the kupdate function we move the inode * to s_more_io so it will get more writeout as * soon as the queue becomes uncongested. */ inode->i_state |= I_DIRTY_PAGES; if (wbc->nr_to_write <= 0) { /* * slice used up: queue for next turn */ requeue_io(inode); } else { /* * somehow blocked: retry later */ redirty_tail(inode); } } else { /* * Otherwise fully redirty the inode so that * other inodes on this superblock will get some * writeout. Otherwise heavy writing to one * file would indefinitely suspend writeout of * all the other files. */ inode->i_state |= I_DIRTY_PAGES; redirty_tail(inode); } } else if (inode->i_state & I_DIRTY) { /* * Someone redirtied the inode while were writing back * the pages. */ redirty_tail(inode); } else if (atomic_read(&inode->i_count)) { /* * The inode is clean, inuse */ list_move(&inode->i_list, &inode_in_use); } else { /* * The inode is clean, unused */ list_move(&inode->i_list, &inode_unused); } } inode_sync_complete(inode); return ret; } /* * Write out an inode's dirty pages. Called under inode_lock. Either the * caller has ref on the inode (either via __iget or via syscall against an fd) * or the inode has I_WILL_FREE set (via generic_forget_inode) */ static int __writeback_single_inode(struct inode *inode, struct writeback_control *wbc) { wait_queue_head_t *wqh; if (!atomic_read(&inode->i_count)) WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING))); else WARN_ON(inode->i_state & I_WILL_FREE); if ((wbc->sync_mode != WB_SYNC_ALL) && (inode->i_state & I_SYNC)) { /* * We're skipping this inode because it's locked, and we're not * doing writeback-for-data-integrity. Move it to s_more_io so * that writeback can proceed with the other inodes on s_io. * We'll have another go at writing back this inode when we * completed a full scan of s_io. */ requeue_io(inode); return 0; } /* * It's a data-integrity sync. We must wait. */ if (inode->i_state & I_SYNC) { DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC); wqh = bit_waitqueue(&inode->i_state, __I_SYNC); do { spin_unlock(&inode_lock); __wait_on_bit(wqh, &wq, inode_wait, TASK_UNINTERRUPTIBLE); spin_lock(&inode_lock); } while (inode->i_state & I_SYNC); } return __sync_single_inode(inode, wbc); } /* * Write out a superblock's list of dirty inodes. A wait will be performed * upon no inodes, all inodes or the final one, depending upon sync_mode. * * If older_than_this is non-NULL, then only write out inodes which * had their first dirtying at a time earlier than *older_than_this. * * If we're a pdlfush thread, then implement pdflush collision avoidance * against the entire list. * * WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so * that it can be located for waiting on in __writeback_single_inode(). * * If `bdi' is non-zero then we're being asked to writeback a specific queue. * This function assumes that the blockdev superblock's inodes are backed by * a variety of queues, so all inodes are searched. For other superblocks, * assume that all inodes are backed by the same queue. * * FIXME: this linear search could get expensive with many fileystems. But * how to fix? We need to go from an address_space to all inodes which share * a queue with that address_space. (Easy: have a global "dirty superblocks" * list). * * The inodes to be written are parked on sb->s_io. They are moved back onto * sb->s_dirty as they are selected for writing. This way, none can be missed * on the writer throttling path, and we get decent balancing between many * throttled threads: we don't want them all piling up on inode_sync_wait. */ void generic_sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc) { const unsigned long start = jiffies; /* livelock avoidance */ spin_lock(&inode_lock); if (!wbc->for_kupdate || list_empty(&sb->s_io)) queue_io(sb, wbc->older_than_this); while (!list_empty(&sb->s_io)) { struct inode *inode = list_entry(sb->s_io.prev, struct inode, i_list); struct address_space *mapping = inode->i_mapping; struct backing_dev_info *bdi = mapping->backing_dev_info; long pages_skipped; if (!bdi_cap_writeback_dirty(bdi)) { redirty_tail(inode); if (sb_is_blkdev_sb(sb)) { /* * Dirty memory-backed blockdev: the ramdisk * driver does this. Skip just this inode */ continue; } /* * Dirty memory-backed inode against a filesystem other * than the kernel-internal bdev filesystem. Skip the * entire superblock. */ break; } if (wbc->nonblocking && bdi_write_congested(bdi)) { wbc->encountered_congestion = 1; if (!sb_is_blkdev_sb(sb)) break; /* Skip a congested fs */ requeue_io(inode); continue; /* Skip a congested blockdev */ } if (wbc->bdi && bdi != wbc->bdi) { if (!sb_is_blkdev_sb(sb)) break; /* fs has the wrong queue */ requeue_io(inode); continue; /* blockdev has wrong queue */ } /* Was this inode dirtied after sync_sb_inodes was called? */ if (time_after(inode->dirtied_when, start)) break; /* Is another pdflush already flushing this queue? */ if (current_is_pdflush() && !writeback_acquire(bdi)) break; BUG_ON(inode->i_state & I_FREEING); __iget(inode); pages_skipped = wbc->pages_skipped; __writeback_single_inode(inode, wbc); if (wbc->sync_mode == WB_SYNC_HOLD) { inode->dirtied_when = jiffies; list_move(&inode->i_list, &sb->s_dirty); } if (current_is_pdflush()) writeback_release(bdi); if (wbc->pages_skipped != pages_skipped) { /* * writeback is not making progress due to locked * buffers. Skip this inode for now. */ redirty_tail(inode); } spin_unlock(&inode_lock); iput(inode); cond_resched(); spin_lock(&inode_lock); if (wbc->nr_to_write <= 0) { wbc->more_io = 1; break; } if (!list_empty(&sb->s_more_io)) wbc->more_io = 1; } spin_unlock(&inode_lock); return; /* Leave any unwritten inodes on s_io */ } EXPORT_SYMBOL_GPL(generic_sync_sb_inodes); static void sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc) { generic_sync_sb_inodes(sb, wbc); } /* * Start writeback of dirty pagecache data against all unlocked inodes. * * Note: * We don't need to grab a reference to superblock here. If it has non-empty * ->s_dirty it's hadn't been killed yet and kill_super() won't proceed * past sync_inodes_sb() until the ->s_dirty/s_io/s_more_io lists are all * empty. Since __sync_single_inode() regains inode_lock before it finally moves * inode from superblock lists we are OK. * * If `older_than_this' is non-zero then only flush inodes which have a * flushtime older than *older_than_this. * * If `bdi' is non-zero then we will scan the first inode against each * superblock until we find the matching ones. One group will be the dirty * inodes against a filesystem. Then when we hit the dummy blockdev superblock, * sync_sb_inodes will seekout the blockdev which matches `bdi'. Maybe not * super-efficient but we're about to do a ton of I/O... */ void writeback_inodes(struct writeback_control *wbc) { struct super_block *sb; might_sleep(); spin_lock(&sb_lock); restart: list_for_each_entry_reverse(sb, &super_blocks, s_list) { if (sb_has_dirty_inodes(sb)) { /* we're making our own get_super here */ sb->s_count++; spin_unlock(&sb_lock); /* * If we can't get the readlock, there's no sense in * waiting around, most of the time the FS is going to * be unmounted by the time it is released. */ if (down_read_trylock(&sb->s_umount)) { if (sb->s_root) sync_sb_inodes(sb, wbc); up_read(&sb->s_umount); } spin_lock(&sb_lock); if (__put_super_and_need_restart(sb)) goto restart; } if (wbc->nr_to_write <= 0) break; } spin_unlock(&sb_lock); } /* * writeback and wait upon the filesystem's dirty inodes. The caller will * do this in two passes - one to write, and one to wait. WB_SYNC_HOLD is * used to park the written inodes on sb->s_dirty for the wait pass. * * A finite limit is set on the number of pages which will be written. * To prevent infinite livelock of sys_sync(). * * We add in the number of potentially dirty inodes, because each inode write * can dirty pagecache in the underlying blockdev. */ void sync_inodes_sb(struct super_block *sb, int wait) { struct writeback_control wbc = { .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_HOLD, .range_start = 0, .range_end = LLONG_MAX, }; unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY); unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS); wbc.nr_to_write = nr_dirty + nr_unstable + (inodes_stat.nr_inodes - inodes_stat.nr_unused) + nr_dirty + nr_unstable; wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */ sync_sb_inodes(sb, &wbc); } /* * Rather lame livelock avoidance. */ static void set_sb_syncing(int val) { struct super_block *sb; spin_lock(&sb_lock); list_for_each_entry_reverse(sb, &super_blocks, s_list) sb->s_syncing = val; spin_unlock(&sb_lock); } /** * sync_inodes - writes all inodes to disk * @wait: wait for completion * * sync_inodes() goes through each super block's dirty inode list, writes the * inodes out, waits on the writeout and puts the inodes back on the normal * list. * * This is for sys_sync(). fsync_dev() uses the same algorithm. The subtle * part of the sync functions is that the blockdev "superblock" is processed * last. This is because the write_inode() function of a typical fs will * perform no I/O, but will mark buffers in the blockdev mapping as dirty. * What we want to do is to perform all that dirtying first, and then write * back all those inode blocks via the blockdev mapping in one sweep. So the * additional (somewhat redundant) sync_blockdev() calls here are to make * sure that really happens. Because if we call sync_inodes_sb(wait=1) with * outstanding dirty inodes, the writeback goes block-at-a-time within the * filesystem's write_inode(). This is extremely slow. */ static void __sync_inodes(int wait) { struct super_block *sb; spin_lock(&sb_lock); restart: list_for_each_entry(sb, &super_blocks, s_list) { if (sb->s_syncing) continue; sb->s_syncing = 1; sb->s_count++; spin_unlock(&sb_lock); down_read(&sb->s_umount); if (sb->s_root) { sync_inodes_sb(sb, wait); sync_blockdev(sb->s_bdev); } up_read(&sb->s_umount); spin_lock(&sb_lock); if (__put_super_and_need_restart(sb)) goto restart; } spin_unlock(&sb_lock); } void sync_inodes(int wait) { set_sb_syncing(0); __sync_inodes(0); if (wait) { set_sb_syncing(0); __sync_inodes(1); } } /** * write_inode_now - write an inode to disk * @inode: inode to write to disk * @sync: whether the write should be synchronous or not * * This function commits an inode to disk immediately if it is dirty. This is * primarily needed by knfsd. * * The caller must either have a ref on the inode or must have set I_WILL_FREE. */ int write_inode_now(struct inode *inode, int sync) { int ret; struct writeback_control wbc = { .nr_to_write = LONG_MAX, .sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE, .range_start = 0, .range_end = LLONG_MAX, }; if (!mapping_cap_writeback_dirty(inode->i_mapping)) wbc.nr_to_write = 0; might_sleep(); spin_lock(&inode_lock); ret = __writeback_single_inode(inode, &wbc); spin_unlock(&inode_lock); if (sync) inode_sync_wait(inode); return ret; } EXPORT_SYMBOL(write_inode_now); /** * sync_inode - write an inode and its pages to disk. * @inode: the inode to sync * @wbc: controls the writeback mode * * sync_inode() will write an inode and its pages to disk. It will also * correctly update the inode on its superblock's dirty inode lists and will * update inode->i_state. * * The caller must have a ref on the inode. */ int sync_inode(struct inode *inode, struct writeback_control *wbc) { int ret; spin_lock(&inode_lock); ret = __writeback_single_inode(inode, wbc); spin_unlock(&inode_lock); return ret; } EXPORT_SYMBOL(sync_inode); /** * generic_osync_inode - flush all dirty data for a given inode to disk * @inode: inode to write * @mapping: the address_space that should be flushed * @what: what to write and wait upon * * This can be called by file_write functions for files which have the * O_SYNC flag set, to flush dirty writes to disk. * * @what is a bitmask, specifying which part of the inode's data should be * written and waited upon. * * OSYNC_DATA: i_mapping's dirty data * OSYNC_METADATA: the buffers at i_mapping->private_list * OSYNC_INODE: the inode itself */ int generic_osync_inode(struct inode *inode, struct address_space *mapping, int what) { int err = 0; int need_write_inode_now = 0; int err2; if (what & OSYNC_DATA) err = filemap_fdatawrite(mapping); if (what & (OSYNC_METADATA|OSYNC_DATA)) { err2 = sync_mapping_buffers(mapping); if (!err) err = err2; } if (what & OSYNC_DATA) { err2 = filemap_fdatawait(mapping); if (!err) err = err2; } spin_lock(&inode_lock); if ((inode->i_state & I_DIRTY) && ((what & OSYNC_INODE) || (inode->i_state & I_DIRTY_DATASYNC))) need_write_inode_now = 1; spin_unlock(&inode_lock); if (need_write_inode_now) { err2 = write_inode_now(inode, 1); if (!err) err = err2; } else inode_sync_wait(inode); return err; } EXPORT_SYMBOL(generic_osync_inode);