/* * linux/arch/arm/mach-mmp/aspenite.c * * Support for the Marvell PXA168-based Aspenite and Zylonite2 * Development Platform. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include "common.h" static unsigned long common_pin_config[] __initdata = { /* Data Flash Interface */ GPIO0_DFI_D15, GPIO1_DFI_D14, GPIO2_DFI_D13, GPIO3_DFI_D12, GPIO4_DFI_D11, GPIO5_DFI_D10, GPIO6_DFI_D9, GPIO7_DFI_D8, GPIO8_DFI_D7, GPIO9_DFI_D6, GPIO10_DFI_D5, GPIO11_DFI_D4, GPIO12_DFI_D3, GPIO13_DFI_D2, GPIO14_DFI_D1, GPIO15_DFI_D0, /* Static Memory Controller */ GPIO18_SMC_nCS0, GPIO34_SMC_nCS1, GPIO23_SMC_nLUA, GPIO25_SMC_nLLA, GPIO28_SMC_RDY, GPIO29_SMC_SCLK, GPIO35_SMC_BE1, GPIO36_SMC_BE2, GPIO27_GPIO, /* Ethernet IRQ */ /* UART1 */ GPIO107_UART1_RXD, GPIO108_UART1_TXD, }; static struct smc91x_platdata smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; static struct resource smc91x_resources[] = { [0] = { .start = SMC_CS1_PHYS_BASE + 0x300, .end = SMC_CS1_PHYS_BASE + 0xfffff, .flags = IORESOURCE_MEM, }, [1] = { .start = gpio_to_irq(27), .end = gpio_to_irq(27), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .dev = { .platform_data = &smc91x_info, }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); /* on-chip devices */ pxa168_add_uart(1); /* off-chip devices */ platform_device_register(&smc91x_device); } MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .phys_io = APB_PHYS_BASE, .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, MACHINE_END MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .phys_io = APB_PHYS_BASE, .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, MACHINE_END