aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-17[PATCH] USB: pl2303: adds new IDs.Luiz Fernando Capitulino
This patch adds two new Siemens mobiles IDs for the pl2303 driver. Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: onetouch doesn't suspend yetDavid Brownell
The onetouch support doesn't suspend correctly (leaves an interrupt URB posted, instead of unlinking it) so for now just disable it when PM is in the air. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: cp2101.c: Jablotron usb serial interface identificationJosef Balatka
Jablotron usb serial interface identification Signed-off-by: Josef Balatka <balatka@email.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: kill unneccessary usb-storage blacklist entriesPavel Machek
I actually have this device, and kernel reports blacklist entry is no longer neccessary. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: usbdevfs_ioctl 32bit fixAndrew Morton
drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast NFI if this is correct... Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] usbfs: usbfs_dir_inode_operations cleanupOGAWA Hirofumi
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: fix 'unused variable' warningDmitry Torokhov
USB: fix 'unused variable' warning Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: wacom tablet driver updatePing Cheng
This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. and report Device IDs. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: add new wacom devices to usb hid-core listPing Cheng
This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB Serial: rename ChangeLog.oldGreg Kroah-Hartman
People are complaining about a .old file in the tree. So rename drivers/usb/serial/ChangeLog.old to ChangeLog.history. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] USB: fix build breakage in dummy_hcd.cGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[PATCH] Fix IXP4xx I2C driver build breakageDeepak Saxena
Platform device conversion missed a couple of spots. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
2005-11-17Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-11-17[PATCH] ipw2200: fix error log offset calculationZhu Yi
This fixes a slab corruption issue in the ipw2200 driver: it essentially multiplied the error log number _twice_ by the size of the error element entry (once explicitly in the code, and once implicitly as part of the regular pointer arithmetic). Cc: Henrik Brix Andersen <brix@gentoo.org> Cc: Bernard Blackham <bernard@blackham.com.au> Cc: Zilvinas Valinskas <zilvinas@gemtek.lt> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> --
2005-11-17[PATCH] ipw2200: disallow direct scanning when device is downPekka Enberg
The function ipw_request_direct_scan() should bail out when the device is down. This fixes a lockup caused by wpa_supplicant triggering ipw_request_direct_scan() while the driver was in a middle of a reset due to firmware errors. Thanks to Zilvinas Valinskas for reporting the bug and helping me debug it. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17[IDE] Add driver for Sibyte Swarm evaluation boardRalf Baechle
This driver supports the IDE port on the Sibyte Swarm evaluation boards and it's relatives for the BCM1250 family of systems on a chip. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-17[MIPS] zs.c: Resurrect the deceased zs.c for now.Maciej W. Rozycki
Not that it's meant to be sustained for long, but from time to time it's useful to have some console... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-17[libata sata_mv] handle lack of hardware nIEN supportJeff Garzik
Handle errata (it was unintentional on this h/w, whereas its intentional on others) whereby the nIEN bit in Device Control is ignored, leading to a situation where a hardware interrupt completes the qc before the polling code has a chance to. This will get fixed The Right Way(tm) once Albert Lee's irq-pio branch is merged, as the more natural PIO method on this hardware is interrupt-driven.
2005-11-17[libata sata_mv] SATA probe, DMA boundary fixesJeff Garzik
- DMA boundary was being handled incorrectly. Copied the code from ata_fill_sg(), since Marvell has the same DMA boundary needs. (we can't use ata_fill_sg directly since we have different hardware descriptors) - cleaned up the SATA phy reset code, to deal with various errata
2005-11-17[libata] add timeout to commands for which we call wait_completion()Jeff Garzik
2005-11-17[PATCH] powerpc: Workaround for offb on 64 bits platformsBenjamin Herrenschmidt
This fixes a problem with offb not parsing addresses properly on 64 bits machines, and thus crashing at boot. The problem is worked around by locating the matching PCI device and using the properly relocated PCI base addresses instead of misparsing the Open Firmware properties. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16Merge branch 'upstream-fixes'Jeff Garzik
2005-11-16Merge branch 'master'Jeff Garzik
2005-11-16r8169: do not abort when the power management capabilities are disabledFrancois Romieu
The capabilities of the 8169 can be disabled but it is hardly a reason to prevent the use the device. The (so far) unusual behavior has been reported on a MIPS platform by Yoichi Yuasa. Spotted-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-16r8169: fix printk_ratelimit in the interrupt handlerFrancois Romieu
I keep on getting "printk: N messages suppressed" messages. We need to test netif_msg_intr() _before_ running printk_ratelimit(), because the latter updates state. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-16Merge branch 'upstream-fixes'Jeff Garzik
2005-11-16[PATCH] Generic HDLC WAN drivers - disable netif_carrier_off()Krzysztof Halasa
As we are currently unable to fix the problem with carrier and protocol state signaling in net core I've to disable netif_carrier_off() calls used by WAN protocol drivers. The attached patch should make them working again. The remaining netif_carrier_*() calls in hdlc_fr.c are fine as they don't touch the physical device. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-16[libata] bump versionsJeff Garzik
2005-11-16[libata ahci] tone down ATAPI errorsJeff Garzik
ATA devices don't generate many errors, so the preferred method is to printk() when they occur. ATAPI devices generate tons of exceptions during the normal course of operation, so this change skips logging the most common class of errors.
2005-11-16[PATCH] libata: honor the transfer cycle time speficied by the EIDE deviceAlbert Lee
The following code segment is not functional because the transfer cycle time speficied by the EIDE device is later overwritten by ata_timing_quantize(): /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. */ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); (snip) ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); <== uninitialized "t" is used here } /* * Convert the timing to bus clock counts. */ ata_timing_quantize(s, t, T, UT); <== t is overwritten by quantized s The patch has been submitted for ide-timing.h before: http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2 Resubmitted for libata. Changes: - Minor fix to honor the following transfer cycle time speficied by the device - id[65]: Minimum Multiword DMA transfer cycle time per word - id[67]: Minimum PIO transfer cycle time without flow control - id[68]: Minimum PIO transfer cycle time with IORDY Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ======= Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16[PATCH] sil24: add constantsTejun Heo
Adds constants for ATAPI support to sata_sil24. This patch is originally from Jeff Garzik <jgarzik@pobox.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16[DVB] cinergyT2: cinergyt2_register_rc() should return 0 on successDavid S. Miller
Currently, the version when ENABLE_RC is defined, falls through to the end of the function without returning anything. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-16[SPARC64]: Oops in pci_alloc_consistent with cingergyT2Guido Guenther
From: Guido Guenther <agx@sigxcpu.org> - Use correct API for allocating and freeing DMA buffers. Acked-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-15Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-11-15[libata ahci] command completion fixes, improved debug msgsJeff Garzik
- Fix a regression in command completion, which prevented the restart of the DMA engine after the device throws an error. - Pack more hardware info into the port-reset error message. - Promote "welcome to our timeout" message from debug msg to normal printk.
2005-11-15[PATCH] cciss_scsi warning fixGrant Coady
drivers/block/cciss_scsi.c:264: warning: `print_bytes' defined but not used drivers/block/cciss_scsi.c:298: warning: `print_cmd' defined but not used Signed-off-by: Grant Coady <gcoady@gmail.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-15[PATCH] sdladrv.c build fixToni Mueller
gcc4 doesn't allow typecasted lvals. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-15[PATCH] hfc_usb: fix usb device tableAndrew Morton
We need to use the USB_DEVICE macro here, else the modinfo aliases go all wrong. Also, correctly terminate the table, as noted by Dave Jones <davej@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-15[PATCH] md: make md threads interruptible againNeilBrown
Despite the fact that md threads don't need to be signalled, and won't respond to signals anyway, we need to have an 'interruptible' wait, else they stay in 'D' state and add to the load average. (akpm: the signal_pending() test is unneeded - we'll fix that up in the next round. For now, leave it there because that's how the code used to be). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-15[PATCH] md: mark START_ARRAY deprecated with a dateNeilBrown
This was marked deprecated "after 2.6" back in the 2.5 days. But now it seems there isn't going to be any "after 2.6", and we deprecate by date now. So set a date. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-15[PATCH] ipmi: bump-driver-versionCorey Minyard
Lots of good changes to the driver lately that userspace will care about the version of the driver. Bump the version from 36.0 to 38.0 to be higher than 37 that the 2.4 driver came out with a few weeks ago which doesn't have all the same changes. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14Merge x86-64 update from AndiLinus Torvalds
2005-11-14[PATCH] AGP: Make gart iterator in K8 AGP driver SMP safeAndi Kleen
Ugh! Cc: davej@redhat.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] AGP: Try unsupported AGP chipsets on x86-64 by defaultAndi Kleen
So far all new ones have worked and there isn't much variation because the CPU does all the interesting bits. So enable try unsupported by default. Can be still disabled with try_unsupported=0 (module) or amd64.try_unsupported=0 (boot option) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] AGP: Support ULI/ALI 1689 bridge on AMD64Andi Kleen
(no name because I'm not sure of the correct name) Cc: davej@redhat.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[libata] REQUEST SENSE handling fixesJeff Garzik
- Move ATAPI check-condition handling out of the timeout handler - Use multi-qc-issue feature to issue REQUEST SENSE ATAPI PACKET command upon receiving an ATAPI check-condition. This cleans things up a lot, and eliminates a nasty recursion bug.
2005-11-14[libata] minor fixes, new helpersJeff Garzik
- in ata_dev_identify(), don't assume that all devices are either ATA or ATAPI. In the future, this code will see port multipliers and other devices. - make a debugging printk less verbose - add new helper ata_qc_reinit() - add new helper BPRINTK() and port flag ATA_FLAG_DEBUGMSG, for fine-grained debugging use.
2005-11-14[libata] fix bugs in ATAPI padding DMA mapping codeJeff Garzik
The ATAPI pad-to-next-32bit-boundary code modifies the scatterlist's length variable, sometimes to zero. x86-64 platform would oops if a zero-length scatterlist entry was asked to be mapped. Work around this by ensuring that we never DMA-map a zero length buffer or SG entry.
2005-11-14[libata ahci] error handling fixesJeff Garzik
Needed to get ATAPI working. - dump hardware error bits, if hardware signals an error - only reset hardware during timeout if a command was active - call ata_qc_complete() with a fine-grained error mask. Needed so that atapi_qc_complete() can distinguish between device errors and other errors.
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-27 04:58:09 +0000