aboutsummaryrefslogtreecommitdiff
path: root/drivers/sh
AgeCommit message (Collapse)Author
2009-08-31sh: Fix up simplified multi-evt handling under sparseirq.Paul Mundt
This fixes up the simplified multi-evt handling when sparseirq support is enabled. While vectors are redirected through the single unique masking source, each one of the redirected vectors still requires its own backing irq_desc, which needs to be manually allocated in the sparseirq case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Simplify "multi-evt" interrupt handling.Pawel Moll
This patch changes the way in which "multi-evt" interrups are handled. The intc_evt2irq_table and related intc_evt2irq() have been removed and the "redirecting" handler is installed for the coupled interrupts. Thanks to that the do_IRQ() function don't have to use another level of indirection for all the interrupts... Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Fixes some write posting issues in the interrupt handling for SHStuart Menefy
It is possible for the CPU to re-enable it's interrupt block bit before the write to the interrupt controller has actually masked out the external interupt at the controller. We get around this by reading back from the interrupt controller which will ensure the write has happened. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-12sh: intc: alloc_bootmem() -> kzalloc() conversion.Paul Mundt
Now that the slab allocators are available much earlier, this triggers a the slab_is_available() warning when registering the interrupt controller. Convert to kzalloc() with GFP_NOWAIT, as per the generic changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: Tie sparseirq in to Kconfig.Paul Mundt
Now that the dependent patches are merged, we are ready to enable sparseirq support. This simply adds the Kconfig option, and then converts from the _cpu to the _node allocation routines to follow the upstream sparseirq API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: Wrap irq_to_desc_alloc_cpu() around CONFIG_SPARSE_IRQ temporarily.Paul Mundt
irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in -next, but as we can not presently enable SPARSE_IRQ without the early irq_desc alloc patch, protect it with an ifdef until the interface has settled and we are ready to enable it system-wide. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Teach ipr and intc about dynamically allocating irq_descs.Paul Mundt
This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the intc and ipr controller registration paths. As these are the primary call paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready. There is the added benefit now that each CPU contains specific IPR and INTC tables, so only the vectors with interrupt sources backing them will ever see an irq_desc instantiation. This effectively packs irq_desc down to match the CPU, rather than padding NR_IRQS out to cover the valid vector range. Boards with extra sources will still have to fiddle with the nr_irqs setting, but they can continue doing so through the machvec as before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-06sh: intc: Added resume from hibernation support to the intcFrancesco VIRLINZI
It's required for all modules loaded in the previous runtime session because not initilized duing the kernel start-up. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: intc: set_irq_wake() supportMagnus Damm
Add set_irq_wake() support to intc using sysdev and suspend. The intc controllers are put on a list at registration time and registered as sysdev devices later on during the boot. The sysdev class suspend callback is used to find irqs with wakeup enabled belonging to our intc controller. Such irqs are simply enabled so wakeup interrupts may reach the cpu. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: intc: install enable, disable and shutdown callbacksMagnus Damm
Modify the intc code to install a disable callback. The current solution without a disable callback results in use of the generic default_disable() function. This function is a no-op so suspend_device_irqs() will not disable any intc interrupts at suspend time without this patch. Also, install enable and shutdown callbacks while at it. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-29maple: fix Error in kernel-doc notationRandy Dunlap
Fix kernel-doc error in maple (it's not kernel-doc): Error(drivers/sh/maple/maple.c:782): cannot understand prototype: 'struct bus_type maple_bus_type = ' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-24sh: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-06sh: intc: Make missing unique IRQ mask warning more verbose.Paul Mundt
This includes the IRQ number in addition to the vector, as not all platforms wrap in with INTC_VECT(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - baseMagnus Damm
Instead of keeping the single vector -> single linux irq mapping we extend the intc code to support merging of vectors to a single linux irq. This helps processors such as sh7750, sh7780 and sh7785 which have more vectors than masking ability. With this patch in place we can modify the intc tables to use one irq per maskable irq source. Please note the following: - If multiple vectors share the same enum then only the first vector will be available as a linux irq. - Drivers may need to be rewritten to get pending irq source from the hardware block instead of irq number. This patch together with the sh7785 specific intc tables solves DMA controller irq issues related to buggy interrupt masking. Reported-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: maple: Support block reads and writes.Adrian McMenamin
This patch updates the maple bus to support asynchronous block reads and writes as well as generally improving the quality of the code and supporting concurrency (all needed to support the Dreamcast visual memory unit - a driver will also be posted for that). Changes in the bus driver necessitate some changes in the two maple bus input drivers that are currently in mainline. As well as supporting block reads and writes this code clean up removes some poor handling of locks, uses an atomic status variable to serialise access to devices and more robusly handles the general performance problems of the bus. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-16sh: maple: Do not pass SLAB_POISON to kmem_cache_create()Matt Fleming
SLAB_POISON is not a valid flag for kmem_create_cache() unless CONFIG_DEBUG_SLAB is set, so remove it from the flags argument. Acked-by: Adrian McMenamin <adrian@newgolddream.dyndns.info> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01sh: Move the shared INTC code out to drivers/sh/Paul Mundt
The INTC code will be re-used across different architectures, so move this out to drivers/sh/ and include/linux/sh_intc.h respectively. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Fix up broken kerneldoc comments.Paul Mundt
These were completely unparseable, so fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04maple: Kill useless private_data pointer.Paul Mundt
We can simply wrap in to the dev_set/get_drvdata(), there's no reason to track an extra level of private data on top of the struct device. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04maple: Clean up maple_driver_register/unregister routines.Paul Mundt
These were completely inconsistent. Clean these up to take a maple_driver pointer directly for consistency. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh/maple: clean maple bus codeAdrian McMenamin
This patch cleans up the handling of the maple bus queue to remove the risk of races when adding packets. It also removes references to the redundant connect and disconnect functions. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26maple: fix device detectionAdrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again. (A previous attempt to fix this by delaying initialisation only partially fixed this - as became apparent when the bus was fully loaded) Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14maple: improve detection of attached peripheralsAdrian McMenamin
Improve device detection for maple through longer delay Experience suggests that a much longer delay in setting up the Maple bus on the Dreamcast leads to better hardware detection. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14maple: more robust device detection.Adrian McMenamin
Replacement second-in-series patch: This patch fixes up memory leaks and, by delaying initialisation, makes device detection more robust. It also makes clearer the difference between struct maple_device and struct device, as well as cleaning up the interrupt request code (without changing its function in any way). Also now removes redundant registration checking. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14maple: fix up whitespace damage.Adrian McMenamin
This patch is fundamentally about fixing up the whitespace problems introduced by my previous patch (that brought the code into mainline). A second patch will follow that will fix memory leaks. The two need to be applied sequentially. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07superhyway: Handle device_register() retval properly.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30maple: Fix maple bus compiler warningAdrian McMenamin
The uevent API has changed from 2.6.22 and this patch eliminates annoying compiler errors Signed off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add maple bus support for the SEGA Dreamcast.Adrian McMenamin
The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-01-13[PATCH] Add superhyway_bus_type probe and remove methodsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-07[PATCH] superhyway: multiple block support and VCR reworkPaul Mundt
This extends the API somewhat to allow for platform-specific VCR reading and writing. Some platforms (like SH4-202) implement the VCR in a split VCRL and VCRH, but end up being in reverse order or have other quirks that need to be dealt with, so we add a set of superhyway_ops per-bus to accomodate this. We also have to extend the per-device resources somewhat, as some devices now conveniently split control and data blocks. So we allow a platform to register its set of SuperHyway devices via superhyway_add_devices() with the control block always ordered as the first resource (as this is the one that userspace cares about). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-20[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - ↵Yani Ioannou
drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!