aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-11Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
2010-07-10i2c/mips: Fix error return codes from Sibyte i2c bus driverGuenter Roeck
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-10i2c: Fix probability checkJean Delvare
The new unified probing function differs from the original code, and the preliminary test whether probing is possible must be updated accordingly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-08IB/qib: Use request_firmware() to load SD7220 firmwareBen Hutchings
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix world-writable child interface control sysfs attributes IB/qib: Clean up properly if qib_init() fails IB/qib: Completion queue callback needs to be single threaded IB/qib: Update 7322 serdes tables IB/qib: Clear 6120 hardware error register IB/qib: Clear eager buffer memory for each new process IB/qib: Mask hardware error during link reset IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problem RDMA/cxgb4: Derive smac_idx from port viid RDMA/cxgb4: Avoid false GTS CIDX_INC overflows RDMA/cxgb4: Don't call abort_connection() for active connect failures RDMA/cxgb4: Use the DMA state API instead of the pci equivalents
2010-07-08Merge branches 'cxgb4', 'ipoib' and 'qib' into for-nextRoland Dreier
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Enable beep on Realtek codecs with PCI SSID override ALSA: usb-audio - Add volume resolution quirk for some Logitech webcams ALSA: hda - Add Macbook 5,2 quirk ALSA: hda - Fix uninitialized variable
2010-07-08Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: writeback: simplify the write back thread queue writeback: split writeback_inodes_wb writeback: remove writeback_inodes_wbc fs-writeback: fix kernel-doc warnings splice: check f_mode for seekable file splice: direct_splice_actor() should not use pos in sd
2010-07-08Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix userspace build of ptrace.h powerpc: Fix default_machine_crash_shutdown #ifdef botch powerpc: Fix logic error in fixup_irqs powerpc/iseries: Fix possible null pointer dereference in iSeries_pcibios_fixup_resources powerpc: Linux cannot run with 0 cores powerpc: Fix feature-fixup tests for gcc 4.5 powerpc: Disable SPARSE_IRQ by default powerpc: Fix compile errors in prom_init_check for gcc 4.5 powerpc: Fix module building for gcc 4.5 and 64 bit powerpc/perf_event: Fix for power_pmu_disable()
2010-07-08Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix on wrong function name for S5PV210 sdhci0 ARM: S5P6442: Fix PLL setting announce message. ARM: SAMSUNG: Fix build without SDHCI controllers for S3C64XX ARM: S5PV210: Correct clock register properties ARM: S5P: Bug fix on external interrupt for S5P SoCs
2010-07-08Merge branch 'fix/misc' into for-linusTakashi Iwai
2010-07-08Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-07-08powerpc: Fix userspace build of ptrace.hSam Ravnborg
Build of ptrace.h failed for assembly because it pulls in stdint.h. Use exportable types (__u32, __u64) to avoid the dependency on stdint.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Andrey Volkov <avolkov@varma-el.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix default_machine_crash_shutdown #ifdef botchPaul E. McKenney
crash_kexec_wait_realmode() is defined only if CONFIG_PPC_STD_MMU_64 and CONFIG_SMP, but is called if CONFIG_PPC_STD_MMU_64 even if !CONFIG_SMP. Fix the conditional compilation around the invocation. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix logic error in fixup_irqsJohannes Berg
When SPARSE_IRQ is set, irq_to_desc() can return NULL. While the code here has a check for NULL, it's not really correct. Fix it by separating the check for it. This fixes CPU hot unplug for me. Reported-by: Alastair Bridgewater <alastair.bridgewater@gmail.com> Cc: stable@kernel.org [2.6.32+] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc/iseries: Fix possible null pointer dereference in ↵Denis Kirjanov
iSeries_pcibios_fixup_resources I don't know if this is a right fix for the problem since of_get_property can return NULL. Since iseries_device_information is used only for informational purpose, we can skip this function without valid HvSubBusNumber number. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Linux cannot run with 0 coresAnton Blanchard
If we configure with CONFIG_SMP=n or set NR_CPUS less than the number of SMT threads we will set the max cores property to 0 in the ibm,client-architecture-support structure. On new versions of firmware that understand this property it obliges and terminates our partition. Use DIV_ROUND_UP so we handle not only the CONFIG_SMP=n case but also the case where NR_CPUS isn't a multiple of the number of SMT threads. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix feature-fixup tests for gcc 4.5Stephen Rothwell
The feature-fixup test declare some extern void variables and then take their addresses. Fix this by declaring them as extern u8 instead. Fixes these warnings (treated as errors): CC arch/powerpc/lib/feature-fixups.o cc1: warnings being treated as errors arch/powerpc/lib/feature-fixups.c: In function 'test_cpu_macros': arch/powerpc/lib/feature-fixups.c:293:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:294:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:297:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:297:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c: In function 'test_fw_macros': arch/powerpc/lib/feature-fixups.c:306:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:307:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:310:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:310:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c: In function 'test_lwsync_macros': arch/powerpc/lib/feature-fixups.c:321:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:322:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:326:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:326:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:329:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:329:3: error: taking address of expression of type 'void' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Disable SPARSE_IRQ by defaultYang Li
The SPARSE_IRQ considerably adds overhead to critical path of IRQ handling. However it doesn't benefit much in space for most systems with limited IRQ_NR. Should be disabled unless really necessary. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix compile errors in prom_init_check for gcc 4.5Stephen Rothwell
Just whitelist these extra compiler generated symbols. Fixes these errors: Error: External symbol '_restgpr0_14' referenced from prom_init.c Error: External symbol '_restgpr0_20' referenced from prom_init.c Error: External symbol '_restgpr0_22' referenced from prom_init.c Error: External symbol '_restgpr0_24' referenced from prom_init.c Error: External symbol '_restgpr0_25' referenced from prom_init.c Error: External symbol '_restgpr0_26' referenced from prom_init.c Error: External symbol '_restgpr0_27' referenced from prom_init.c Error: External symbol '_restgpr0_28' referenced from prom_init.c Error: External symbol '_restgpr0_29' referenced from prom_init.c Error: External symbol '_restgpr0_31' referenced from prom_init.c Error: External symbol '_savegpr0_14' referenced from prom_init.c Error: External symbol '_savegpr0_20' referenced from prom_init.c Error: External symbol '_savegpr0_22' referenced from prom_init.c Error: External symbol '_savegpr0_24' referenced from prom_init.c Error: External symbol '_savegpr0_25' referenced from prom_init.c Error: External symbol '_savegpr0_26' referenced from prom_init.c Error: External symbol '_savegpr0_27' referenced from prom_init.c Error: External symbol '_savegpr0_28' referenced from prom_init.c Error: External symbol '_savegpr0_29' referenced from prom_init.c Error: External symbol '_savegpr0_31' referenced from prom_init.c Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix module building for gcc 4.5 and 64 bitStephen Rothwell
Gcc 4.5 is now generating out of line register save and restore in the function prefix and postfix when we use -Os. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc/perf_event: Fix for power_pmu_disable()Matt Evans
When power_pmu_disable() removes the given event from a particular index into cpuhw->event[], it shuffles down higher event[] entries. But, this array is paired with cpuhw->events[] and cpuhw->flags[] so should shuffle them similarly. If these arrays get out of sync, code such as power_check_constraints() will fail. This caused a bug where events were temporarily disabled and then failed to be re-enabled; subsequent code tried to write_pmc() with its (disabled) idx of 0, causing a message "oops trying to write PMC0". This triggers this bug on POWER7, running a miss-heavy test: perf record -e L1-dcache-load-misses -e L1-dcache-store-misses ./misstest Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (35 commits) NET: SB1250: Initialize .owner vxge: show startup message with KERN_INFO ll_temac: Fix missing iounmaps bridge: Clear IPCB before possible entry into IP stack bridge br_multicast: BUG: unable to handle kernel NULL pointer dereference net: Fix definition of netif_vdbg() when VERBOSE_DEBUG is defined net/ne: fix memory leak in ne_drv_probe() xfrm: fix xfrm by MARK logic virtio_net: fix oom handling on tx virtio_net: do not reschedule rx refill forever s2io: resolve statistics issues linux/net.h: fix kernel-doc warnings net: decreasing real_num_tx_queues needs to flush qdisc sched: qdisc_reset_all_tx is calling qdisc_reset without qdisc_lock qlge: fix a eeh handler to not add a pending timer qlge: Replacing add_timer() to mod_timer() usbnet: Set parent device early for netdev_printk() net: Revert "rndis_host: Poll status channel before control channel" netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT drivers: bluetooth: bluecard_cs.c: Fixed include error, changed to linux/io.h ...
2010-07-07NET: SB1250: Initialize .ownerRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/sb1250-mac.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07vxge: show startup message with KERN_INFOWu Fengguang
The original KERN_CRIT will mess up terminals. CC: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07ll_temac: Fix missing iounmapsDenis Kirjanov
Fix missing iounmaps. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07bridge: Clear IPCB before possible entry into IP stackHerbert Xu
The bridge protocol lives dangerously by having incestuous relations with the IP stack. In this instance an abomination has been created where a bogus IPCB area from a bridged packet leads to a crash in the IP stack because it's interpreted as IP options. This patch papers over the problem by clearing the IPCB area in that particular spot. To fix this properly we'd also need to parse any IP options if present but I'm way too lazy for that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: correctly update connector DPMS status in drm_fb_helper drm/radeon/kms: fix shared ddc handling drm/ttm: Allocate the page pool manager in the heap.
2010-07-07drm: correctly update connector DPMS status in drm_fb_helperJesse Barnes
We don't currently update the DPMS status of the connector (both in the connector itself and the connector's DPMS property) in the fb helper code. This means that if the kernel FB core has blanked the screen, sysfs will still show a DPMS status of "on". It also means that when X starts, it will try to light up the connectors, but the drm_crtc_helper code will ignore the DPMS change since according to the connector, the DPMS status is already on. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28436 (the annoying "my screen was blanked when I started X and now it won't light up" bug). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07drm/radeon/kms: fix shared ddc handlingAlex Deucher
Connectors with a shared ddc line can be connected to different encoders. Reported by Pasi Kärkkäinen <pasik@iki.fi> on dri-devel Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07drm/ttm: Allocate the page pool manager in the heap.Francisco Jerez
Repeated ttm_page_alloc_init/fini fails noisily because the pool manager kobj isn't zeroed out between uses (we could do just that but statically allocated kobjects are generally considered a bad thing). Move it to kzalloc'ed memory. Note that this patch drops the refcounting behavior of the pool allocator init/fini functions: it would have led to a race condition in its current form, and anyway it was never exploited. This fixes a regression with reloading kms modules at runtime, since page allocator was introduced. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-06VFS: introduce s_dirty accessorsArtem Bityutskiy
This patch introduces 3 VFS accessors: 'sb_mark_dirty()', 'sb_mark_clean()', and 'sb_is_dirty()'. They simply set 'sb->s_dirt' or test 'sb->s_dirt'. The plan is to make every FS use these accessors later instead of manipulating the 'sb->s_dirt' flag directly. Ultimately, this change is a preparation for the periodic superblock synchronization optimization which is about preventing the "sync_supers" kernel thread from waking up even if there is nothing to synchronize. This patch does not do any functional change, just adds accessor functions. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-06Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rbtree: Undo augmented trees performance damage and regression x86, Calgary: Limit the max PHB number to 256
2010-07-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix crush device 'out' threshold to 1.0, not 0.1 ceph: fix caps usage accounting for import (non-reserved) case ceph: only release clean, unused caps with mds requests ceph: fix crush CHOOSE_LEAF when type is already a leaf ceph: fix crush recursion ceph: fix caps debugfs entry ceph: delay umount until all mds requests drop inode+dentry refs ceph: handle splice_dentry/d_materialize_unique error in readdir_prepopulate ceph: fix crush map update decoding ceph: fix message memory leak, uninitialized variable ceph: fix map handler error path ceph: some endianity fixes
2010-07-06Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: do not initialize the present flag too late.
2010-07-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits) MIPS: Return after handling coprocessor 2 exception MIPS: BCM47xx: Add NVRAM support devices MIPS: Loongson: Define rtc device on MC146818-equipped systems MIPS: MT: Fix FPU affinity. MIPS: Oprofile: Fixup of loongson2_exit() MIPS: Alchemy: sleepcode without compile-time cputype dependencies MIPS: Tracing: Cleanup of address space checking MIPS: Tracing: Cleanup of function graph tracer MIPS: Tracing: Reduce the overhead of dynamic Function Tracer MIPS: Tracing: Cleanup of instructions used MIPS: Tracing: Fix 32-bit support with -mmcount-ra-address MIPS: Tracing: Fix argument passing of the 32bit support with gcc 4.5 MIPS: Tracing: Cleanup comments MIPS: Tracing: Cleanup the arguments passing of prepare_ftrace_return MIPS: Tracing: Merge adjacent #ifdefs with same condition. MIPS: AR7, BCM63xx: fix gpio_to_irq() return value MIPS: Restore signalling NaN behaviour for abs.[sd] MIPS: Loongson: CS5536: Fix ISA support MIPS: Loongson: Add a missing break statement in CS5536 IDE code MIPS: Loongson: CS5536: Add missing RDMSRs for IDE and USB ...
2010-07-06kbuild: Fix path to scripts/setlocalversionMichal Marek
Commit 0a564b2 broke LOCALVERSION for O=... builds. Ouch. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-06IPoIB: Fix world-writable child interface control sysfs attributesOr Gerlitz
Sumeet Lahorani <sumeet.lahorani@oracle.com> reported that the IPoIB child entries are world-writable; however we don't want ordinary users to be able to create and destroy child interfaces, so fix them to be writable only by root. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clean up properly if qib_init() failsRalph Campbell
If qib_init() fails, the driver fails to free memory, unregister device files, and unregister with the PCIe framework. The driver will unload without error but a subsequent driver load will cause the system to panic. This was found by changing the 7220 code to load the serdes microcode separately and not installing the microcode file. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Completion queue callback needs to be single threadedRalph Campbell
Workqueues aren't exactly equivalent to tasklets since the callback function may be called from multiple CPUs before the callback returns. This causes completion notification callbacks to have MT bugs since they weren't expecting this behavior. The fix is to use a single threaded work queue. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Update 7322 serdes tablesRalph Campbell
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clear 6120 hardware error registerRalph Campbell
The hardware error register needs to be cleared or another interrupt will be generated, thus causing an infinite loop. This is a regression introduced when removing debug output. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clear eager buffer memory for each new processRalph Campbell
The eager buffers are not being cleared before being mmapped into a new user address space. This is a potential security risk and should be fixed. Note that the eager header queue is already being cleared. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Mask hardware error during link resetRalph Campbell
The HCA checks for certain hardware errors which can be falsely triggered when the IB link is reset. The fix is to mask them rather than report them. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problemDave Olson
Don't set write combining via PAT on the VL15 buffers to avoid a rare problem with unaligned writes from interrupt-flushed store buffers. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Derive smac_idx from port viidSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Avoid false GTS CIDX_INC overflowsSteve Wise
The T4 IQ hw design assumes CIDX_INC credits will be returned on a regular basis and always before the CIDX counter crosses over the PIDX counter. For RDMA CQs, however, returning CIDX_INC credits is only needed and desired when and if the CQ is armed for notification. This can lead to a GTS write returning credits that causes the HW to reject the credit update because it causes CIDX to pass PIDX. Once this happens, the CIDX/PIDX counters get out of whack and an application can miss a notification and get stuck blocked awaiting a notification. To avoid this, we allocate the HW IQ 2x times the requested size. This seems to avoid the false overflow failures. If we see more issues with this, then we'll have to add code in the poll path to return credits periodically like when the amount reaches 1/2 the queue depth). I would like to avoid this as it adds a PCI write transaction for applications that never arm the CQ (like most MPIs). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Don't call abort_connection() for active connect failuresSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06writeback: simplify the write back thread queueChristoph Hellwig
First remove items from work_list as soon as we start working on them. This means we don't have to track any pending or visited state and can get rid of all the RCU magic freeing the work items - we can simply free them once the operation has finished. Second use a real completion for tracking synchronous requests - if the caller sets the completion pointer we complete it, otherwise use it as a boolean indicator that we can free the work item directly. Third unify struct wb_writeback_args and struct bdi_work into a single data structure, wb_writeback_work. Previous we set all parameters into a struct wb_writeback_args, copied it into struct bdi_work, copied it again on the stack to use it there. Instead of just allocate one structure dynamically or on the stack and use it all the way through the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-13 07:11:47 +0000