diff options
Diffstat (limited to 'include/asm-arm/arch-clps711x')
| -rw-r--r-- | include/asm-arm/arch-clps711x/hardware.h | 117 | ||||
| -rw-r--r-- | include/asm-arm/arch-clps711x/mp1000-seprom.h | 77 |
2 files changed, 194 insertions, 0 deletions
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index 1386871e1a5..f864c367c93 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,4 +235,121 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) +#if defined (CONFIG_MACH_MP1000) +/* NOR FLASH */ +#define MP1000_NIO_BASE 0xf9000000 /* virtual */ +#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ +#define MP1000_NIO_SIZE 0x00400000 + +/* DSP Interface */ +#define MP1000_DSP_BASE 0xfa000000 /* virtual */ +#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ +#define MP1000_DSP_SIZE 0x00100000 + +/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ +#define MP1000_LIO_BASE 0xfb000000 /* virtual */ +#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ +#define MP1000_LIO_SIZE 0x00100000 + +/* NAND FLASH */ +#define MP1000_FIO_BASE 0xfc000000 /* virtual */ +#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ +#define MP1000_FIO_SIZE 0x00800000 + +/* Ethernet */ +#define MP1000_EIO_BASE 0xfd000000 /* virtual */ +#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ +#define MP1000_EIO_SIZE 0x00100000 + +#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ +#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ +#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ +#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ + +/* IDE */ +#define MP1000_IDE_BASE 0xfe000000 /* virtual */ +#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ +#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ + +#define IRQ_HARDDISK IRQ_EINT2 + +/* + * IDE registers definition + */ + +#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) +#define IDE_BASE_OFF (MP1000_IDE_BASE) + +#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) +#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) +#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) +#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) +#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) +#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) +#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) +#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) +#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) + +#define IDE_IRQ IRQ_EINT2 + + +#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) +#define RTC_ALWAYS_BCD 0 + +/* +// Definitions of the bit fields in the HwPortA register for the +// MP1000 board. +*/ +#define HwPortAKeyboardRow1 0x00000001 +#define HwPortAKeyboardRow2 0x00000002 +#define HwPortAKeyboardRow3 0x00000004 +#define HwPortAKeyboardRow4 0x00000008 +#define HwPortAKeyboardRow5 0x00000010 +#define HwPortAKeyboardRow6 0x00000020 +#define HwPortALCDEnable 0x00000040 +#define HwPortAOffhook 0x00000080 + +/* +// Definitions of the bit fields in the HwPortB register for the +// MP1000 board. +*/ +#define HwPortBL3Mode 0x00000001 +#define HwPortBL3Clk 0x00000002 +#define HwPortBSClk 0x00000001 +#define HwPortBSData 0x00000002 +#define HwPortBL3Data 0x00000004 +#define HwPortBMute 0x00000008 +#define HwPortBQD0 0x00000010 +#define HwPortBQD1 0x00000020 +#define HwPortBQD2 0x00000040 +#define HwPortBQD3 0x00000080 + +/* +// Definitions of the bit fields in the HwPortD register for the +// MP1000 board. +*/ +#define HwPortDLED1 0x00000001 +#define HwPortDLED2 0x00000002 +#define HwPortDLED3 0x00000004 +#define HwPortDLED4 0x00000008 +#define HwPortDLED5 0x00000010 +#define HwPortDEECS 0x00000020 +#define HwPortBRTS 0x00000040 +#define HwPortBRI 0x00000080 + + +/* +// Definitions of the bit fields in the HwPortE register for the +// MP1000 board. +*/ + +#define HwPortECLE 0x00000001 +#define HwPortESepromDOut 0x00000001 +#define HwPortEALE 0x00000002 +#define HwPortESepromDIn 0x00000002 +#define HwPortENANDCS 0x00000004 +#define HwPortESepromCLK 0x00000004 + +#endif // #if defined (CONFIG_MACH_MP1000) + #endif diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h new file mode 100644 index 00000000000..3e5566cf966 --- /dev/null +++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h @@ -0,0 +1,77 @@ +#ifndef MP1000_SEPROM_H +#define MP1000_SEPROM_H + +/* + * mp1000-seprom.h + * + * + * This file contains the Serial EEPROM definitions for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define COMMAND_ERASE (0x1C0) +#define COMMAND_ERASE_ALL (0x120) +#define COMMAND_WRITE_DISABLE (0x100) +#define COMMAND_WRITE_ENABLE (0x130) +#define COMMAND_READ (0x180) +#define COMMAND_WRITE (0x140) +#define COMMAND_WRITE_ALL (0x110) + +// +// Serial EEPROM data format +// + +#define PACKED __attribute__ ((packed)) + +typedef struct _EEPROM { + union { + unsigned char eprom_byte_data[128]; + unsigned short eprom_short_data[64]; + struct { + unsigned char version PACKED; // EEPROM Version "1" for now + unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc) + unsigned char major_hw_version PACKED; // Major Hardware version (Hex) + unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex) + unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic) + unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number + unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD) + unsigned char country PACKED; // Country of deployment + unsigned char mac_Address[6] PACKED; // MAC Address + unsigned char oem_string[20] PACKED; // OEM ID string + unsigned short feature_bits1 PACKED; // Feature Bits 1 + unsigned short feature_bits2 PACKED; // Feature Bits 2 + unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized + unsigned short checksum PACKED; // byte accumulated short checksum + } eprom_struct; + } variant; +} eeprom_struct; + +/* These settings must be mutually exclusive */ +#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */ +#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */ +#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */ + +#define FEATURE_BITS1_CPUIS90MEG 0x0010 + +extern void seprom_init(void); +extern eeprom_struct* get_seprom_ptr(void); +extern unsigned char* get_eeprom_mac_address(void); + +#endif /* MP1000_SEPROM_H */ + |