diff options
Diffstat (limited to 'include/asm-arm/arch-clps711x/hardware.h')
| -rw-r--r-- | include/asm-arm/arch-clps711x/hardware.h | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index f864c367c93..1386871e1a5 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,121 +235,4 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) -#if defined (CONFIG_MACH_MP1000) -/* NOR FLASH */ -#define MP1000_NIO_BASE 0xf9000000 /* virtual */ -#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ -#define MP1000_NIO_SIZE 0x00400000 - -/* DSP Interface */ -#define MP1000_DSP_BASE 0xfa000000 /* virtual */ -#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ -#define MP1000_DSP_SIZE 0x00100000 - -/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ -#define MP1000_LIO_BASE 0xfb000000 /* virtual */ -#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ -#define MP1000_LIO_SIZE 0x00100000 - -/* NAND FLASH */ -#define MP1000_FIO_BASE 0xfc000000 /* virtual */ -#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ -#define MP1000_FIO_SIZE 0x00800000 - -/* Ethernet */ -#define MP1000_EIO_BASE 0xfd000000 /* virtual */ -#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ -#define MP1000_EIO_SIZE 0x00100000 - -#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ -#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ -#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ -#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ - -/* IDE */ -#define MP1000_IDE_BASE 0xfe000000 /* virtual */ -#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ -#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ - -#define IRQ_HARDDISK IRQ_EINT2 - -/* - * IDE registers definition - */ - -#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) -#define IDE_BASE_OFF (MP1000_IDE_BASE) - -#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) -#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) -#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) -#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) -#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) -#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) -#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) -#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) -#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) - -#define IDE_IRQ IRQ_EINT2 - - -#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) -#define RTC_ALWAYS_BCD 0 - -/* -// Definitions of the bit fields in the HwPortA register for the -// MP1000 board. -*/ -#define HwPortAKeyboardRow1 0x00000001 -#define HwPortAKeyboardRow2 0x00000002 -#define HwPortAKeyboardRow3 0x00000004 -#define HwPortAKeyboardRow4 0x00000008 -#define HwPortAKeyboardRow5 0x00000010 -#define HwPortAKeyboardRow6 0x00000020 -#define HwPortALCDEnable 0x00000040 -#define HwPortAOffhook 0x00000080 - -/* -// Definitions of the bit fields in the HwPortB register for the -// MP1000 board. -*/ -#define HwPortBL3Mode 0x00000001 -#define HwPortBL3Clk 0x00000002 -#define HwPortBSClk 0x00000001 -#define HwPortBSData 0x00000002 -#define HwPortBL3Data 0x00000004 -#define HwPortBMute 0x00000008 -#define HwPortBQD0 0x00000010 -#define HwPortBQD1 0x00000020 -#define HwPortBQD2 0x00000040 -#define HwPortBQD3 0x00000080 - -/* -// Definitions of the bit fields in the HwPortD register for the -// MP1000 board. -*/ -#define HwPortDLED1 0x00000001 -#define HwPortDLED2 0x00000002 -#define HwPortDLED3 0x00000004 -#define HwPortDLED4 0x00000008 -#define HwPortDLED5 0x00000010 -#define HwPortDEECS 0x00000020 -#define HwPortBRTS 0x00000040 -#define HwPortBRI 0x00000080 - - -/* -// Definitions of the bit fields in the HwPortE register for the -// MP1000 board. -*/ - -#define HwPortECLE 0x00000001 -#define HwPortESepromDOut 0x00000001 -#define HwPortEALE 0x00000002 -#define HwPortESepromDIn 0x00000002 -#define HwPortENANDCS 0x00000004 -#define HwPortESepromCLK 0x00000004 - -#endif // #if defined (CONFIG_MACH_MP1000) - #endif |