diff options
62 files changed, 720 insertions, 519 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b56ea860da2..a5c05506676 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1252,6 +1252,8 @@ and is between 256 and 4096 characters. It is defined in the file * nohrst, nosrst, norst: suppress hard, soft and both resets. + * dump_id: dump IDENTIFY data. + If there are multiple matching configurations changing the same attribute, the last one is used. diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e68541f662b..73f883333a0 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -57,6 +57,8 @@ config SATA_PMP This option adds support for SATA Port Multipliers (the SATA version of an ethernet hub, or SAS expander). +comment "Controllers with non-SFF native interface" + config SATA_AHCI tristate "AHCI SATA support" depends on PCI @@ -73,11 +75,12 @@ config SATA_AHCI_PLATFORM If unsure, say N. -config SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on PCI +config SATA_FSL + tristate "Freescale 3.0Gbps SATA support" + depends on FSL_SOC help - This option enables support for Silicon Image 3124/3132 Serial ATA. + This option enables support for Freescale 3.0Gbps SATA controller. + It can be found on MPC837x and MPC8315. If unsure, say N. @@ -87,12 +90,11 @@ config SATA_INIC162X help This option enables support for Initio 162x Serial ATA. -config SATA_FSL - tristate "Freescale 3.0Gbps SATA support" - depends on FSL_SOC +config SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on PCI help - This option enables support for Freescale 3.0Gbps SATA controller. - It can be found on MPC837x and MPC8315. + This option enables support for Silicon Image 3124/3132 Serial ATA. If unsure, say N. @@ -116,15 +118,65 @@ config ATA_SFF if ATA_SFF -config SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" +comment "SFF controllers with custom DMA interface" + +config PDC_ADMA + tristate "Pacific Digital ADMA support" depends on PCI help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config PATA_MPC52xx + tristate "Freescale MPC52xx SoC internal IDE" + depends on PPC_MPC52xx && PPC_BESTCOMM + select PPC_BESTCOMM_ATA + help + This option enables support for integrated IDE controller + of the Freescale MPC52xx SoC. + + If unsure, say N. + +config PATA_OCTEON_CF + tristate "OCTEON Boot Bus Compact Flash support" + depends on CPU_CAVIUM_OCTEON + help + This option enables a polled compact flash driver for use with + compact flash cards attached to the OCTEON boot bus. + + If unsure, say N. + +config SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SATA_SX4 + tristate "Promise SATA SX4 support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for Promise Serial ATA SX4. If unsure, say N. +config ATA_BMDMA + bool "ATA BMDMA support" + default y + help + This option adds support for SFF ATA controllers with BMDMA + capability. BMDMA stands for bus-master DMA and the + de-facto DMA interface for SFF controllers. + + If unuser, say Y. + +if ATA_BMDMA + +comment "SATA SFF controllers with BMDMA" + config ATA_PIIX tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" depends on PCI @@ -152,22 +204,6 @@ config SATA_NV If unsure, say N. -config PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on PCI - help - This option enables support for Pacific Digital ADMA controllers - - If unsure, say N. - -config SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - config SATA_PROMISE tristate "Promise SATA TX2/TX4 support" depends on PCI @@ -176,14 +212,6 @@ config SATA_PROMISE If unsure, say N. -config SATA_SX4 - tristate "Promise SATA SX4 support (Experimental)" - depends on PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - config SATA_SIL tristate "Silicon Image SATA support" depends on PCI @@ -203,6 +231,15 @@ config SATA_SIS enable the PATA_SIS driver in the config. If unsure, say N. +config SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + config SATA_ULI tristate "ULi Electronics SATA support" depends on PCI @@ -227,14 +264,7 @@ config SATA_VITESSE If unsure, say N. -config PATA_ACPI - tristate "ACPI firmware driver for PATA" - depends on ATA_ACPI - help - This option enables an ACPI method driver which drives - motherboard PATA controller interfaces through the ACPI - firmware in the BIOS. This driver can sometimes handle - otherwise unsupported hardware. +comment "PATA SFF controllers with BMDMA" config PATA_ALI tristate "ALi PATA support" @@ -262,40 +292,30 @@ config PATA_ARTOP If unsure, say N. -config PATA_ATP867X - tristate "ARTOP/Acard ATP867X PATA support" +config PATA_ATIIXP + tristate "ATI PATA support" depends on PCI help - This option enables support for ARTOP/Acard ATP867X PATA - controllers. - - If unsure, say N. - -config PATA_AT32 - tristate "Atmel AVR32 PATA support (Experimental)" - depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL - help - This option enables support for the IDE devices on the - Atmel AT32AP platform. + This option enables support for the ATI ATA interfaces + found on the many ATI chipsets. If unsure, say N. -config PATA_ATIIXP - tristate "ATI PATA support" +config PATA_ATP867X + tristate "ARTOP/Acard ATP867X PATA support" depends on PCI help - This option enables support for the ATI ATA interfaces - found on the many ATI chipsets. + This option enables support for ARTOP/Acard ATP867X PATA + controllers. If unsure, say N. -config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Experimental)" - depends on PCI && EXPERIMENTAL +config PATA_BF54X + tristate "Blackfin 54x ATAPI support" + depends on BF542 || BF548 || BF549 help - This option enables support for the CMD640 PCI IDE - interface chip. Only the primary channel is currently - supported. + This option enables support for the built-in ATAPI controller on + Blackfin 54x family chips. If unsure, say N. @@ -362,15 +382,6 @@ config PATA_EFAR If unsure, say N. -config ATA_GENERIC - tristate "Generic ATA support" - depends on PCI - help - This option enables support for generic BIOS configured - ATA controllers via the new ATA layer - - If unsure, say N. - config PATA_HPT366 tristate "HPT 366/368 PATA support" depends on PCI @@ -415,12 +426,20 @@ config PATA_HPT3X3_DMA controllers. Enable with care as there are still some problems with DMA on this chipset. -config PATA_ISAPNP - tristate "ISA Plug and Play PATA support" - depends on ISAPNP +config PATA_ICSIDE + tristate "Acorn ICS PATA support" + depends on ARM && ARCH_ACORN help - This option enables support for ISA plug & play ATA - controllers such as those found on old soundcards. + On Acorn systems, say Y here if you wish to use the ICS PATA + interface card. This is not required for ICS partition support. + If you are unsure, say N to this. + +config PATA_IT8213 + tristate "IT8213 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ITE 821 PATA + controllers via the new ATA layer. If unsure, say N. @@ -434,15 +453,6 @@ config PATA_IT821X If unsure, say N. -config PATA_IT8213 - tristate "IT8213 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL - help - This option enables support for the ITE 821 PATA - controllers via the new ATA layer. - - If unsure, say N. - config PATA_JMICRON tristate "JMicron PATA support" depends on PCI @@ -452,23 +462,14 @@ config PATA_JMICRON If unsure, say N. -config PATA_LEGACY - tristate "Legacy ISA PATA support (Experimental)" - depends on (ISA || PCI) && EXPERIMENTAL - help - This option enables support for ISA/VLB/PCI bus legacy PATA - ports and allows them to be accessed via the new ATA layer. - - If unsure, say N. - -config PATA_TRIFLEX - tristate "Compaq Triflex PATA support" - depends on PCI +config PATA_MACIO + tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" + depends on PPC_PMAC help - Enable support for the Compaq 'Triflex' IDE controller as found - on many Compaq Pentium-Pro systems, via the new ATA layer. - - If unsure, say N. + Most IDE capable PowerMacs have IDE busses driven by a variant + of this controller which is part of the Apple chipset used on + most PowerMac models. Some models have multiple busses using + different chipsets, though generally, MacIO is one of them. config PATA_MARVELL tristate "Marvell PATA support via legacy mode" @@ -481,32 +482,6 @@ config PATA_MARVELL If unsure, say N. -config PATA_MPC52xx - tristate "Freescale MPC52xx SoC internal IDE" - depends on PPC_MPC52xx && PPC_BESTCOMM - select PPC_BESTCOMM_ATA - help - This option enables support for integrated IDE controller - of the Freescale MPC52xx SoC. - - If unsure, say N. - -config PATA_MPIIX - tristate "Intel PATA MPIIX support" - depends on PCI - help - This option enables support for MPIIX PATA support. - - If unsure, say N. - -config PATA_OLDPIIX - tristate "Intel PATA old PIIX support" - depends on PCI - help - This option enables support for early PIIX PATA support. - - If unsure, say N. - config PATA_NETCELL tristate "NETCELL Revolution RAID support" depends on PCI @@ -525,15 +500,6 @@ config PATA_NINJA32 If unsure, say N. -config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support" - depends on PCI - help - This option enables support for the National Semiconductor - NS87410 PCI-IDE controller. - - If unsure, say N. - config PATA_NS87415 tristate "Nat Semi NS87415 PATA support" depends on PCI @@ -543,12 +509,11 @@ config PATA_NS87415 If unsure, say N. -config PATA_OPTI - tristate "OPTI621/6215 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support" + depends on PCI help - This option enables full PIO support for the early Opti ATA - controllers found on some old motherboards. + This option enables support for early PIIX PATA support. If unsure, say N. @@ -562,24 +527,6 @@ config PATA_OPTIDMA If unsure, say N. -config PATA_PALMLD - tristate "Palm LifeDrive PATA support" - depends on MACH_PALMLD - help - This option enables support for Palm LifeDrive's internal ATA - port via the new ATA layer. - - If unsure, say N. - -config PATA_PCMCIA - tristate "PCMCIA PATA support" - depends on PCMCIA - help - This option enables support for PCMCIA ATA interfaces, including - compact flash card adapters via the new ATA layer. - - If unsure, say N. - config PATA_PDC2027X tristate "Promise PATA 2027x support" depends on PCI @@ -597,12 +544,6 @@ config PATA_PDC_OLD If unsure, say N. -config PATA_QDI - tristate "QDI VLB PATA support" - depends on ISA - help - Support for QDI 6500 and 6580 PATA controllers on VESA local bus. - config PATA_RADISYS tristate "RADISYS 82600 PATA support (Experimental)" depends on PCI && EXPERIMENTAL @@ -612,15 +553,6 @@ config PATA_RADISYS If unsure, say N. -config PATA_RB532 - tristate "RouterBoard 532 PATA CompactFlash support" - depends on MIKROTIK_RB532 - help - This option enables support for the RouterBoard 532 - PATA CompactFlash controller. - - If unsure, say N. - config PATA_RDC tristate "RDC PATA support" depends on PCI @@ -631,21 +563,30 @@ config PATA_RDC If unsure, say N. -config PATA_RZ1000 - tristate "PC Tech RZ1000 PATA support" +config PATA_SC1200 + tristate "SC1200 PATA support" depends on PCI help - This option enables basic support for the PC Tech RZ1000/1 - PATA controllers via the new ATA layer + This option enables support for the NatSemi/AMD SC1200 SoC + companion chip used with the Geode processor family. If unsure, say N. -config PATA_SC1200 - tristate "SC1200 PATA support" +config PATA_SCC + tristate "Toshiba's Cell Reference Set IDE support" + depends on PCI && PPC_CELLEB + help + This option enables support for the built-in IDE controller on + Toshiba Cell Reference Board. + + If unsure, say N. + +config PATA_SCH + tristate "Intel SCH PATA support" depends on PCI help - This option enables support for the NatSemi/AMD SC1200 SoC - companion chip used with the Geode processor family. + This option enables support for Intel SCH PATA on the Intel + SCH (US15W, US15L, UL11L) series host controllers. If unsure, say N. @@ -683,6 +624,15 @@ config PATA_TOSHIBA If unsure, say N. +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + config PATA_VIA tristate "VIA PATA support" depends on PCI @@ -701,12 +651,99 @@ config PATA_WINBOND If unsure, say N. -config PATA_WINBOND_VLB - tristate "Winbond W83759A VLB PATA support (Experimental)" - depends on ISA && EXPERIMENTAL +endif # ATA_BMDMA + +comment "PIO-only SFF controllers" + +config PATA_AT32 + tristate "Atmel AVR32 PATA support (Experimental)" + depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL help - Support for the Winbond W83759A controller on Vesa Local Bus - systems. + This option enables support for the IDE devices on the + Atmel AT32AP platform. + + If unsure, say N. + +config PATA_AT91 + tristate "PATA support for AT91SAM9260" + depends on ARM && ARCH_AT91 + help + This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. + + If unsure, say N. + +config PATA_CMD640_PCI + tristate "CMD640 PCI PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the CMD640 PCI IDE + interface chip. Only the primary channel is currently + supported. + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IXP4XX_CF + tristate "IXP4XX Compact Flash support" + depends on ARCH_IXP4XX + help + This option enables support for a Compact Flash connected on + the ixp4xx expansion bus. This driver had been written for + Loft/Avila boards in mind but can work with others. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support" + depends on PCI + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. config HAVE_PATA_PLATFORM bool @@ -725,14 +762,6 @@ config PATA_PLATFORM If unsure, say N. -config PATA_AT91 - tristate "PATA support for AT91SAM9260" - depends on ARM && ARCH_AT91 - help - This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. - - If unsure, say N. - config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" depends on PATA_PLATFORM && PPC_OF @@ -743,69 +772,65 @@ config PATA_OF_PLATFORM If unsure, say N. -config PATA_ICSIDE - tristate "Acorn ICS PATA support" - depends on ARM && ARCH_ACORN +config PATA_QDI + tristate "QDI VLB PATA support" + depends on ISA help - On Acorn systems, say Y here if you wish to use the ICS PATA - interface card. This is not required for ICS partition support. - If you are unsure, say N to this. + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. -config PATA_IXP4XX_CF - tristate "IXP4XX Compact Flash support" - depends on ARCH_IXP4XX +config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 help - This option enables support for a Compact Flash connected on - the ixp4xx expansion bus. This driver had been written for - Loft/Avila boards in mind but can work with others. + This option enables support for the RouterBoard 532 + PATA CompactFlash controller. If unsure, say N. -config PATA_OCTEON_CF - tristate "OCTEON Boot Bus Compact Flash support" - depends on CPU_CAVIUM_OCTEON +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI help - This option enables a polled compact flash driver for use with - compact flash cards attached to the OCTEON boot bus. + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer If unsure, say N. -config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB +config PATA_WINBOND_VLB + tristate "Winbond W83759A VLB PATA support (Experimental)" + depends on ISA && EXPERIMENTAL help - This option enables support for the built-in IDE controller on - Toshiba Cell Reference Board. + Support for the Winbond W83759A controller on Vesa Local Bus + systems. - If unsure, say N. +comment "Generic fallback / legacy drivers" -config PATA_SCH - tristate "Intel SCH PATA support" - depends on PCI +config PATA_ACPI + tristate "ACPI firmware driver for PATA" + depends on ATA_ACPI && ATA_BMDMA help - This option enables support for Intel SCH PATA on the Intel - SCH (US15W, US15L, UL11L) series host controllers. - - If unsure, say N. + This option enables an ACPI method driver which drives + motherboard PATA controller interfaces through the ACPI + firmware in the BIOS. This driver can sometimes handle + otherwise unsupported hardware. -config PATA_BF54X - tristate "Blackfin 54x ATAPI support" - depends on BF542 || BF548 || BF549 +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI && ATA_BMDMA help - This option enables support for the built-in ATAPI controller on - Blackfin 54x family chips. + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer If unsure, say N. -config PATA_MACIO - tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" - depends on PPC_PMAC +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on (ISA || PCI) && EXPERIMENTAL help - Most IDE capable PowerMacs have IDE busses driven by a variant - of this controller which is part of the Apple chipset used on - most PowerMac models. Some models have multiple busses using - different chipsets, though generally, MacIO is one of them. + This option enables support for ISA/VLB/PCI bus legacy PATA + ports and allows them to be accessed via the new ATA layer. + If unsure, say N. endif # ATA_SFF endif # ATA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d0a93c4ad3e..7ef89d73df6 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -1,33 +1,39 @@ obj-$(CONFIG_ATA) += libata.o +# non-SFF interface obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o -obj-$(CONFIG_SATA_SVW) += sata_svw.o +obj-$(CONFIG_SATA_FSL) += sata_fsl.o +obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o +obj-$(CONFIG_SATA_SIL24) += sata_sil24.o + +# SFF w/ custom DMA +obj-$(CONFIG_PDC_ADMA) += pdc_adma.o +obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o +obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o +obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o +obj-$(CONFIG_SATA_SX4) += sata_sx4.o + +# SFF SATA w/ BMDMA obj-$(CONFIG_ATA_PIIX) += ata_piix.o +obj-$(CONFIG_SATA_MV) += sata_mv.o +obj-$(CONFIG_SATA_NV) += sata_nv.o obj-$(CONFIG_SATA_PROMISE) += sata_promise.o -obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o obj-$(CONFIG_SATA_SIL) += sata_sil.o -obj-$(CONFIG_SATA_SIL24) += sata_sil24.o -obj-$(CONFIG_SATA_VIA) += sata_via.o -obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o obj-$(CONFIG_SATA_SIS) += sata_sis.o -obj-$(CONFIG_SATA_SX4) += sata_sx4.o -obj-$(CONFIG_SATA_NV) += sata_nv.o +obj-$(CONFIG_SATA_SVW) += sata_svw.o obj-$(CONFIG_SATA_ULI) += sata_uli.o -obj-$(CONFIG_SATA_MV) += sata_mv.o -obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o -obj-$(CONFIG_PDC_ADMA) += pdc_adma.o -obj-$(CONFIG_SATA_FSL) += sata_fsl.o -obj-$(CONFIG_PATA_MACIO) += pata_macio.o +obj-$(CONFIG_SATA_VIA) += sata_via.o +obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o +# SFF PATA w/ BMDMA obj-$(CONFIG_PATA_ALI) += pata_ali.o obj-$(CONFIG_PATA_AMD) += pata_amd.o obj-$(CONFIG_PATA_ARTOP) += pata_artop.o -obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o -obj-$(CONFIG_PATA_AT32) += pata_at32.o obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o -obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o +obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o +obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o @@ -39,47 +45,50 @@ obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o -obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o -obj-$(CONFIG_PATA_IT821X) += pata_it821x.o +obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o obj-$(CONFIG_PATA_IT8213) += pata_it8213.o +obj-$(CONFIG_PATA_IT821X) += pata_it821x.o obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o +obj-$(CONFIG_PATA_MACIO) += pata_macio.o +obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o -obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o -obj-$(CONFIG_PATA_OPTI) += pata_opti.o -obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o -obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o -obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o -obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o -obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o -obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o +obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o -obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o -obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RDC) += pata_rdc.o -obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o +obj-$(CONFIG_PATA_SCC) += pata_scc.o +obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o obj-$(CONFIG_PATA_SIL680) += pata_sil680.o +obj-$(CONFIG_PATA_SIS) += pata_sis.o obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o +obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o obj-$(CONFIG_PATA_VIA) += pata_via.o obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o -obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o -obj-$(CONFIG_PATA_SIS) += pata_sis.o -obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o + +# SFF PIO only +obj-$(CONFIG_PATA_AT32) += pata_at32.o +obj-$(CONFIG_PATA_AT91) += pata_at91.o +obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o +obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o -obj-$(CONFIG_PATA_SCC) += pata_scc.o -obj-$(CONFIG_PATA_SCH) += pata_sch.o -obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o -obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o +obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o +obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o +obj-$(CONFIG_PATA_OPTI) += pata_opti.o +obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o +obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o -obj-$(CONFIG_PATA_AT91) += pata_at91.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o -obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o +obj-$(CONFIG_PATA_QDI) += pata_qdi.o +obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o +obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o +obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o + # Should be last but two libata driver obj-$(CONFIG_PATA_ACPI) += pata_acpi.o # Should be last but one libata driver diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 33fb614f978..573158a9668 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -155,7 +155,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id return rc; pcim_pin_device(dev); } - return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0); } static struct pci_device_id ata_generic[] = { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index ec52fc61876..7409f98d2ae 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1589,7 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, hpriv->map = piix_init_sata_map(pdev, port_info, piix_map_db_table[ent->driver_data]); - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; host->private_data = hpriv; @@ -1626,7 +1626,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); - return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht); + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht); } static void piix_remove_one(struct pci_dev *pdev) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c47373f01f8..06b7e49e039 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -160,6 +160,10 @@ int libata_allow_tpm = 0; module_param_named(allow_tpm, libata_allow_tpm, int, 0444); MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)"); +static int atapi_an; +module_param(atapi_an, int, 0444); +MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -2122,6 +2126,14 @@ retry: goto err_out; } + if (dev->horkage & ATA_HORKAGE_DUMP_ID) { + ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, " + "class=%d may_fallback=%d tried_spinup=%d\n", + class, may_fallback, tried_spinup); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, + 16, 2, id, ATA_ID_WORDS * sizeof(*id), true); + } + /* Falling back doesn't make sense if ID data was read * successfully at least once. */ @@ -2510,7 +2522,8 @@ int ata_dev_configure(struct ata_device *dev) * to enable ATAPI AN to discern between PHY status * changed notifications and ATAPI ANs. */ - if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && + if (atapi_an && + (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && (!sata_pmp_attached(ap) || sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { unsigned int err_mask; @@ -6372,6 +6385,7 @@ static int __init ata_parse_force_one(char **cur, { "3.0Gbps", .spd_limit = 2 }, { "noncq", .horkage_on = ATA_HORKAGE_NONCQ }, { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, + { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID }, { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) }, diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 19ddf924944..efa4a18cfb9 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -63,7 +63,6 @@ const struct ata_port_operations ata_sff_port_ops = { .sff_tf_read = ata_sff_tf_read, .sff_exec_command = ata_sff_exec_command, .sff_data_xfer = ata_sff_data_xfer, - .sff_irq_clear = ata_sff_irq_clear, .sff_drain_fifo = ata_sff_drain_fifo, .lost_interrupt = ata_sff_lost_interrupt, @@ -395,33 +394,12 @@ void ata_sff_irq_on(struct ata_port *ap) ata_sff_set_devctl(ap, ap->ctl); ata_wait_idle(ap); - ap->ops->sff_irq_clear(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); } EXPORT_SYMBOL_GPL(ata_sff_irq_on); /** - * ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Clear interrupt and error flags in DMA status register. - * - * May be used as the irq_clear() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_sff_irq_clear(struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - if (!mmio) - return; - - iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS); -} -EXPORT_SYMBOL_GPL(ata_sff_irq_clear); - -/** * ata_sff_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent * @tf: ATA taskfile register set @@ -820,11 +798,15 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) case ATAPI_PROT_NODATA: ap->hsm_task_state = HSM_ST_LAST; break; +#ifdef CONFIG_ATA_BMDMA case ATAPI_PROT_DMA: ap->hsm_task_state = HSM_ST_LAST; /* initiate bmdma */ ap->ops->bmdma_start(qc); break; +#endif /* CONFIG_ATA_BMDMA */ + default: + BUG(); } } @@ -1491,27 +1473,27 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc) } EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf); -/** - * ata_sff_host_intr - Handle host interrupt for given (port, task) - * @ap: Port on which interrupt arrived (possibly...) - * @qc: Taskfile currently active in engine - * - * Handle host interrupt for given queued command. Currently, - * only DMA interrupts are handled. All other commands are - * handled via polling with interrupts disabled (nIEN bit). - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * One if interrupt was handled, zero if not (shared irq). - */ -unsigned int ata_sff_host_intr(struct ata_port *ap, - struct ata_queued_cmd *qc) +static unsigned int ata_sff_idle_irq(struct ata_port *ap) { - struct ata_eh_info *ehi = &ap->link.eh_info; - u8 status, host_stat = 0; - bool bmdma_stopped = false; + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ap->ops->sff_check_status(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +static unsigned int __ata_sff_port_intr(struct ata_port *ap, + struct ata_queued_cmd *qc, + bool hsmv_on_idle) +{ + u8 status; VPRINTK("ata%u: protocol %d task_state %d\n", ap->print_id, qc->tf.protocol, ap->hsm_task_state); @@ -1528,90 +1510,56 @@ unsigned int ata_sff_host_intr(struct ata_port *ap, * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", - ap->print_id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - bmdma_stopped = true; - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } + return ata_sff_idle_irq(ap); break; case HSM_ST: + case HSM_ST_LAST: break; default: - goto idle_irq; + return ata_sff_idle_irq(ap); } - /* check main status, clearing INTRQ if needed */ status = ata_sff_irq_status(ap); if (status & ATA_BUSY) { - if (bmdma_stopped) { + if (hsmv_on_idle) { /* BMDMA engine is already stopped, we're screwed */ qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } else - goto idle_irq; + return ata_sff_idle_irq(ap); } /* clear irq events */ - ap->ops->sff_irq_clear(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); ata_sff_hsm_move(ap, qc, status, 0); - if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA)) - ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); - ata_port_printk(ap, KERN_WARNING, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ } -EXPORT_SYMBOL_GPL(ata_sff_host_intr); /** - * ata_sff_interrupt - Default ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host information structure + * ata_sff_port_intr - Handle SFF port interrupt + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine * - * Default interrupt handler for PCI IDE devices. Calls - * ata_sff_host_intr() for each port that is not disabled. + * Handle port interrupt for given queued command. * * LOCKING: - * Obtains host lock during operation. + * spin_lock_irqsave(host lock) * * RETURNS: - * IRQ_NONE or IRQ_HANDLED. + * One if interrupt was handled, zero if not (shared irq). */ -irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) +unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + return __ata_sff_port_intr(ap, qc, false); +} +EXPORT_SYMBOL_GPL(ata_sff_port_intr); + +static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance, + unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *)) { struct ata_host *host = dev_instance; bool retried = false; @@ -1631,7 +1579,7 @@ retry: qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc) { if (!(qc->tf.flags & ATA_TFLAG_POLLING)) - handled |= ata_sff_host_intr(ap, qc); + handled |= port_intr(ap, qc); else polling |= 1 << i; } else @@ -1658,7 +1606,8 @@ retry: if (idle & (1 << i)) { ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); } else { /* clear INTRQ and check if BUSY cleared */ if (!(ap->ops->sff_check_status(ap) & ATA_BUSY)) @@ -1680,6 +1629,25 @@ retry: return IRQ_RETVAL(handled); } + +/** + * ata_sff_interrupt - Default SFF ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host information structure + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_sff_port_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ +irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) +{ + return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr); +} EXPORT_SYMBOL_GPL(ata_sff_interrupt); /** @@ -1717,7 +1685,7 @@ void ata_sff_lost_interrupt(struct ata_port *ap) status); /* Run the host interrupt logic as if the interrupt had not been lost */ - ata_sff_host_intr(ap, qc); + ata_sff_port_intr(ap, qc); } EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); @@ -1744,7 +1712,8 @@ void ata_sff_freeze(struct ata_port *ap) */ ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); } EXPORT_SYMBOL_GPL(ata_sff_freeze); @@ -1761,7 +1730,8 @@ void ata_sff_thaw(struct ata_port *ap) { /* clear & re-enable interrupts */ ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); ata_sff_irq_on(ap); } EXPORT_SYMBOL_GPL(ata_sff_thaw); @@ -2349,13 +2319,13 @@ int ata_pci_sff_init_host(struct ata_host *host) EXPORT_SYMBOL_GPL(ata_pci_sff_init_host); /** - * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host + * ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host * @pdev: target PCI device * @ppi: array of port_info, must be enough for two ports * @r_host: out argument for the initialized ATA host * - * Helper to allocate ATA host for @pdev, acquire all native PCI - * resources and initialize it accordingly in one go. + * Helper to allocate PIO-only SFF ATA host for @pdev, acquire + * all PCI resources and initialize it accordingly in one go. * * LOCKING: * Inherited from calling layer (may sleep). @@ -2385,9 +2355,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev, if (rc) goto err_out; - /* init DMA related stuff */ - ata_pci_bmdma_init(host); - devres_remove_group(&pdev->dev, NULL); *r_host = host; return 0; @@ -2492,8 +2459,21 @@ out: } EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); +static const struct ata_port_info *ata_sff_find_valid_pi( + const struct ata_port_info * const *ppi) +{ + int i; + + /* look up the first valid port_info */ + for (i = 0; i < 2 && ppi[i]; i++) + if (ppi[i]->port_ops != &ata_dummy_port_ops) + return ppi[i]; + + return NULL; +} + /** - * ata_pci_sff_init_one - Initialize/register PCI IDE host controller + * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller * @pdev: Controller to be initialized * @ppi: array of port_info, must be enough for two ports * @sht: scsi_host_template to use when registering the host @@ -2502,11 +2482,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); * * This is a helper function which can be called from a driver's * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() + * IDE taskfile registers and is PIO only. * * ASSUMPTION: * Nobody makes a single channel controller that appears solely as @@ -2523,20 +2499,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv, int hflag) { struct device *dev = &pdev->dev; - const struct ata_port_info *pi = NULL; + const struct ata_port_info *pi; struct ata_host *host = NULL; - int i, rc; + int rc; DPRINTK("ENTER\n"); - /* look up the first valid port_info */ - for (i = 0; i < 2 && ppi[i]; i++) { - if (ppi[i]->port_ops != &ata_dummy_port_ops) { - pi = ppi[i]; - break; - } - } - + pi = ata_sff_find_valid_pi(ppi); if (!pi) { dev_printk(KERN_ERR, &pdev->dev, "no valid port_info specified\n"); @@ -2557,7 +2526,6 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, host->private_data = host_priv; host->flags |= hflag; - pci_set_master(pdev); rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); out: if (rc == 0) @@ -2571,6 +2539,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ +/* + * BMDMA support + */ + +#ifdef CONFIG_ATA_BMDMA + const struct ata_port_operations ata_bmdma_port_ops = { .inherits = &ata_sff_port_ops, @@ -2580,6 +2554,7 @@ const struct ata_port_operations ata_bmdma_port_ops = { .qc_prep = ata_bmdma_qc_prep, .qc_issue = ata_bmdma_qc_issue, + .sff_irq_clear = ata_bmdma_irq_clear, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -2804,6 +2779,75 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc) EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue); /** + * ata_bmdma_port_intr - Handle BMDMA port interrupt + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine + * + * Handle port interrupt for given queued command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * One if interrupt was handled, zero if not (shared irq). + */ +unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + u8 host_stat = 0; + bool bmdma_stopped = false; + unsigned int handled; + + if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + return ata_sff_idle_irq(ap); + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + bmdma_stopped = true; + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + + handled = __ata_sff_port_intr(ap, qc, bmdma_stopped); + + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + + return handled; +} +EXPORT_SYMBOL_GPL(ata_bmdma_port_intr); + +/** + * ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host information structure + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_bmdma_port_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ +irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance) +{ + return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr); +} +EXPORT_SYMBOL_GPL(ata_bmdma_interrupt); + +/** * ata_bmdma_error_handler - Stock error handler for BMDMA controller * @ap: port to handle error for * @@ -2848,7 +2892,8 @@ void ata_bmdma_error_handler(struct ata_port *ap) /* if we're gonna thaw, make sure IRQ is clear */ if (thaw) { ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); + if (ap->ops->sff_irq_clear) + ap->ops->sff_irq_clear(ap); } } @@ -2882,6 +2927,28 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); /** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_irq_clear(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + if (!mmio) + return; + + iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS); +} +EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); + +/** * ata_bmdma_setup - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * @@ -3137,7 +3204,100 @@ void ata_pci_bmdma_init(struct ata_host *host) } EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); +/** + * ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host + * @pdev: target PCI device + * @ppi: array of port_info, must be enough for two ports + * @r_host: out argument for the initialized ATA host + * + * Helper to allocate BMDMA ATA host for @pdev, acquire all PCI + * resources and initialize it accordingly in one go. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_bmdma_prepare_host(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct ata_host **r_host) +{ + int rc; + + rc = ata_pci_sff_prepare_host(pdev, ppi, r_host); + if (rc) + return rc; + + ata_pci_bmdma_init(*r_host); + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host); + +/** + * ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller + * @pdev: Controller to be initialized + * @ppi: array of port_info, must be enough for two ports + * @sht: scsi_host_template to use when registering the host + * @host_priv: host private_data + * @hflags: host flags + * + * This function is similar to ata_pci_sff_init_one() but also + * takes care of BMDMA initialization. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ +int ata_pci_bmdma_init_one(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct scsi_host_template *sht, void *host_priv, + int hflags) +{ + struct device *dev = &pdev->dev; + const struct ata_port_info *pi; + struct ata_host *host = NULL; + int rc; + + DPRINTK("ENTER\n"); + + pi = ata_sff_find_valid_pi(ppi); + if (!pi) { + dev_printk(KERN_ERR, &pdev->dev, + "no valid port_info specified\n"); + return -EINVAL; + } + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + rc = pcim_enable_device(pdev); + if (rc) + goto out; + + /* prepare and activate BMDMA host */ + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + goto out; + host->private_data = host_priv; + host->flags |= hflags; + + pci_set_master(pdev); + rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); + out: + if (rc == 0) + devres_remove_group(&pdev->dev, NULL); + else + devres_release_group(&pdev->dev, NULL); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one); + #endif /* CONFIG_PCI */ +#endif /* CONFIG_ATA_BMDMA */ /** * ata_sff_port_init - Initialize SFF/BMDMA ATA port diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index 066b9f301ed..c8d47034d5e 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -260,7 +260,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) return rc; pcim_pin_device(pdev); } - return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0); } static const struct pci_device_id pacpi_pci_tbl[] = { diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index f306e10c748..794ec6e3275 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -583,7 +583,10 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[0] = &info_20_udma; } - return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0); + if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask) + return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0); + else + return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index d95eca9c547..620a07cabe3 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -574,7 +574,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } /* And fire it up */ - return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &amd_sht, hpriv, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 4d066d6c30f..ba43f0f8c88 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -421,7 +421,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) BUG_ON(ppi[0] == NULL); - return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0); } static const struct pci_device_id artop_pci_tbl[] = { diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 44d88b380dd..43755616dc5 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -246,8 +246,8 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) ppi[i] = &ata_dummy_port_info; - return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL, - ATA_HOST_PARALLEL_SCAN); + return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, + ATA_HOST_PARALLEL_SCAN); } static const struct pci_device_id atiixp[] = { diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c index bb6e0746e07..95295935dd9 100644 --- a/drivers/ata/pata_atp867x.c +++ b/drivers/ata/pata_atp867x.c @@ -525,7 +525,7 @@ static int atp867x_init_one(struct pci_dev *pdev, pci_set_master(pdev); - rc = ata_host_activate(host, pdev->irq, ata_sff_interrupt, + rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &atp867x_sht); if (rc) dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n"); diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 6422cfd13d0..9cae65de750 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1214,7 +1214,7 @@ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf, * bfin_irq_clear - Clear ATAPI interrupt. * @ap: Port associated with this ATA transaction. * - * Note: Original code is ata_sff_irq_clear(). + * Note: Original code is ata_bmdma_irq_clear(). */ static void bfin_irq_clear(struct ata_port *ap) diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 4c81a71b887..9f5da1c7454 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -367,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 17c5f346ff0..030952f1f97 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -221,7 +221,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi continue; rc = devm_request_irq(&pdev->dev, irq[ap->port_no], - ata_sff_interrupt, 0, DRV_NAME, host); + ata_bmdma_interrupt, 0, DRV_NAME, host); if (rc) return rc; diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index e809a4233a8..f792330f0d8 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -324,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[1] = &info_palmax_secondary; /* Now kick off ATA set up */ - return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index a02e6459fdc..03a93186aa1 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -198,7 +198,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) rdmsr(ATAC_CH0D1_PIO, timings, dummy); if (CS5535_BAD_PIO(timings)) wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); - return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0); } static const struct pci_device_id cs5535[] = { diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index 914ae3506ff..21ee23f89e8 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -260,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } - return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0); } static const struct pci_device_id cs5536[] = { diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 0fcc096b8da..6d915b063d9 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -138,7 +138,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i if (PCI_FUNC(pdev->devfn) != 1) return -ENODEV; - return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0); } static const struct pci_device_id cy82c693[] = { diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 3bac0e07969..a08834758ea 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -277,8 +277,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL, - ATA_HOST_PARALLEL_SCAN); + return ata_pci_bmdma_init_one(pdev, ppi, &efar_sht, NULL, + ATA_HOST_PARALLEL_SCAN); } static const struct pci_device_id efar_pci_tbl[] = { diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 8580eb3cd54..7688868557b 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -361,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) break; } /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); + return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 98b498b6907..9ae4c083057 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -987,7 +987,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0); + return ata_pci_bmdma_init_one(dev, ppi, &hpt37x_sht, private_data, 0); } static const struct pci_device_id hpt37x[] = { diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 8b95aeba0e7..32f3463216b 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -548,7 +548,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0); + return ata_pci_bmdma_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0); } static const struct pci_device_id hpt3x2n[] = { diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index 727a81ce4c9..b63d5e2d462 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -248,7 +248,7 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd"); } pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &hpt3x3_sht); } diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index b56e8f722d2..9f2889fe43b 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -470,7 +470,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info) pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]); } - return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0, + return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0, &pata_icside_sht); } diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index f971f0de88e..4d142a2ab8f 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -273,7 +273,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0); } static const struct pci_device_id it8213_pci_tbl[] = { diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 2bd2b002d14..bf88f71a21f 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -933,7 +933,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) else ppi[0] = &info_smart; } - return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &it821x_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 565e01e6ac7..cb3babbb703 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i }; const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0); } static const struct pci_device_id jmicron_pci_tbl[] = { diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c index b5b48e703cb..76640ac7688 100644 --- a/drivers/ata/pata_macio.c +++ b/drivers/ata/pata_macio.c @@ -1110,7 +1110,7 @@ static int __devinit pata_macio_common_init(struct pata_macio_priv *priv, /* Start it up */ priv->irq = irq; - return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0, + return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0, &pata_macio_sht); } diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index e8ca02e5a71..dd38083dcbe 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -153,7 +153,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i return -ENODEV; } #endif - return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &marvell_sht, NULL, 0); } static const struct pci_device_id marvell_pci_tbl[] = { diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 36afe2c1c74..f087ab55b1d 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -659,7 +659,7 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv, ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs); /* activate host */ - return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0, + return ata_host_activate(host, priv->ata_irq, ata_bmdma_interrupt, 0, &mpc52xx_ata_sht); } diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 94f979a7f4f..3eb921c746a 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -82,7 +82,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e ata_pci_bmdma_clear_simplex(pdev); /* And let the library code do the work */ - return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0); } static const struct pci_device_id netcell_pci_tbl[] = { diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index dd53a66b19e..cc50bd09aa2 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -149,7 +149,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ninja32_program(base); /* FIXME: Should we disable them at remove ? */ - return ata_host_activate(host, dev->irq, ata_sff_interrupt, + return ata_host_activate(host, dev->irq, ata_bmdma_interrupt, IRQF_SHARED, &ninja32_sht); } diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index fdbba2d76d3..605f198f958 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -380,7 +380,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e ns87415_fixup(pdev); - return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0); } static const struct pci_device_id ns87415_pci_tbl[] = { diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 3001109352e..06ddd91ffed 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -750,20 +750,6 @@ static void octeon_cf_dev_config(struct ata_device *dev) } /* - * Trap if driver tries to do standard bmdma commands. They are not - * supported. - */ -static void unreachable_qc(struct ata_queued_cmd *qc) -{ - BUG(); -} - -static u8 unreachable_port(struct ata_port *ap) -{ - BUG(); -} - -/* * We don't do ATAPI DMA so return 0. */ static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc) @@ -804,10 +790,6 @@ static struct ata_port_operations octeon_cf_ops = { .sff_dev_select = octeon_cf_dev_select, .sff_irq_on = octeon_cf_irq_on, .sff_irq_clear = octeon_cf_irq_clear, - .bmdma_setup = unreachable_qc, - .bmdma_start = unreachable_qc, - .bmdma_stop = unreachable_qc, - .bmdma_status = unreachable_port, .cable_detect = ata_cable_40wire, .set_piomode = octeon_cf_set_piomode, .set_dmamode = octeon_cf_set_dmamode, diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 988ef2627be..b811c163620 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -248,7 +248,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &oldpiix_sht, NULL, 0); } static const struct pci_device_id oldpiix_pci_tbl[] = { diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 76b7d12b1e8..0852cd07de0 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -429,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (optiplus_with_udma(dev)) ppi[0] = &info_82c700_udma; - return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &optidma_sht, NULL, 0); } static const struct pci_device_id optidma[] = { diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 09f1f22c030..b1835112252 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -754,7 +754,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de return -EIO; pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &pdc2027x_sht); } diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index fa1e2f3bc0f..c39f213e1bb 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -337,7 +337,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id return -ENODEV; } } - return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0); } static const struct pci_device_id pdc202xx[] = { diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c index 98161541484..cb01bf9496f 100644 --- a/drivers/ata/pata_piccolo.c +++ b/drivers/ata/pata_piccolo.c @@ -95,7 +95,7 @@ static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id }; const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; /* Just one port for the moment */ - return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &tosh_sht, NULL, 0); } static struct pci_device_id ata_tosh[] = { diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index a5fa388e539..8574b31f177 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -227,7 +227,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &radisys_sht, NULL, 0); } static const struct pci_device_id radisys_pci_tbl[] = { diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c index 37092cfd7bc..5fbe9b166c6 100644 --- a/drivers/ata/pata_rdc.c +++ b/drivers/ata/pata_rdc.c @@ -344,7 +344,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev, */ pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg); - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; host->private_data = hpriv; @@ -354,7 +354,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev, host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); - return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht); + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht); } static void rdc_remove_one(struct pci_dev *pdev) diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 6b5b63a2fd8..e2c18257adf 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -237,7 +237,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0); } static const struct pci_device_id sc1200[] = { diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 6f6193b707c..d9db3f8d60e 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -875,7 +875,7 @@ static void scc_postreset(struct ata_link *link, unsigned int *classes) * scc_irq_clear - Clear PCI IDE BMDMA interrupt. * @ap: Port associated with this ATA transaction. * - * Note: Original code is ata_sff_irq_clear(). + * Note: Original code is ata_bmdma_irq_clear(). */ static void scc_irq_clear (struct ata_port *ap) @@ -1105,7 +1105,7 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &scc_sht); } diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index 86b3d0133c7..e97b32f03a6 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -179,7 +179,7 @@ static int __devinit sch_init_one(struct pci_dev *pdev, dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(pdev, ppi, &sch_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0); } static int __init sch_init(void) diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 43ea389df2b..86dd714e3e1 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -460,7 +460,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ata_pci_bmdma_clear_simplex(pdev); - return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 43faf106f64..d3190d7ec30 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -374,11 +374,11 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, ata_sff_std_ports(&host->ports[1]->ioaddr); /* Register & activate */ - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &sil680_sht); use_ioports: - return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index b6708032f32..60cea13cccc 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -826,7 +826,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) sis_fixup(pdev, chipset); - return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 733b042a746..98548f640c8 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -316,7 +316,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0); } static const struct pci_device_id sl82c105[] = { diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index 48f50600ed2..0d1f89e571d 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0); + return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0); } static const struct pci_device_id triflex[] = { diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 7e3e0a5598b..5e659885de1 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -627,7 +627,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } /* We have established the device type, now fire it up */ - return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0); + return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0); } #ifdef CONFIG_PM diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index f3471bc949d..a476cd99b95 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -675,8 +675,6 @@ static struct ata_port_operations mv5_ops = { .freeze = mv_eh_freeze, .thaw = mv_eh_thaw, .hardreset = mv_hardreset, - .error_handler = ata_std_error_handler, /* avoid SFF EH */ - .post_internal_cmd = ATA_OP_NULL, .scr_read = mv5_scr_read, .scr_write = mv5_scr_write, @@ -2813,7 +2811,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause) } else if (!edma_was_enabled) { struct ata_queued_cmd *qc = mv_get_active_qc(ap); if (qc) - ata_sff_host_intr(ap, qc); + ata_bmdma_port_intr(ap, qc); else mv_unexpected_intr(ap, edma_was_enabled); } diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index baa8f0d2c86..6fd11478411 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -920,7 +920,7 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat) } /* handle interrupt */ - return ata_sff_host_intr(ap, qc); + return ata_bmdma_port_intr(ap, qc); } static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) @@ -1100,7 +1100,7 @@ static void nv_adma_irq_clear(struct ata_port *ap) u32 notifier_clears[2]; if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) { - ata_sff_irq_clear(ap); + ata_bmdma_irq_clear(ap); return; } @@ -1505,7 +1505,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance) qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - handled += ata_sff_host_intr(ap, qc); + handled += ata_bmdma_port_intr(ap, qc); } else { /* * No request pending? Clear interrupt status @@ -2430,7 +2430,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ppi[0] = &nv_port_info[type]; ipriv = ppi[0]->private_data; - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index d533b3d20ca..daeebf19a6a 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -120,8 +120,6 @@ static void qs_host_stop(struct ata_host *host); static void qs_qc_prep(struct ata_queued_cmd *qc); static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); static int qs_check_atapi_dma(struct ata_queued_cmd *qc); -static void qs_bmdma_stop(struct ata_queued_cmd *qc); -static u8 qs_bmdma_status(struct ata_port *ap); static void qs_freeze(struct ata_port *ap); static void qs_thaw(struct ata_port *ap); static int qs_prereset(struct ata_link *link, unsigned long deadline); @@ -137,8 +135,6 @@ static struct ata_port_operations qs_ata_ops = { .inherits = &ata_sff_port_ops, .check_atapi_dma = qs_check_atapi_dma, - .bmdma_stop = qs_bmdma_stop, - .bmdma_status = qs_bmdma_status, .qc_prep = qs_qc_prep, .qc_issue = qs_qc_issue, @@ -190,16 +186,6 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc) return 1; /* ATAPI DMA not supported */ } -static void qs_bmdma_stop(struct ata_queued_cmd *qc) -{ - /* nothing */ -} - -static u8 qs_bmdma_status(struct ata_port *ap) -{ - return 0; -} - static inline void qs_enter_reg_mode(struct ata_port *ap) { u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000); @@ -454,7 +440,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host) if (!pp || pp->state != qs_state_mmio) continue; if (!(qc->tf.flags & ATA_TFLAG_POLLING)) - handled |= ata_sff_host_intr(ap, qc); + handled |= ata_sff_port_intr(ap, qc); } return handled; } diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 2dda312b6b9..3a4f8421971 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -503,7 +503,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) goto err_hsm; /* ack bmdma irq events */ - ata_sff_irq_clear(ap); + ata_bmdma_irq_clear(ap); /* kick HSM in the ass */ ata_sff_hsm_move(ap, qc, status, 0); @@ -584,7 +584,7 @@ static void sil_thaw(struct ata_port *ap) /* clear IRQ */ ap->ops->sff_check_status(ap); - ata_sff_irq_clear(ap); + ata_bmdma_irq_clear(ap); /* turn on SATA IRQ if supported */ if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index f8a91bfd66a..2bfe3ae0397 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -279,7 +279,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) break; } - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; @@ -308,7 +308,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); pci_intx(pdev, 1); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &sis_sht); } diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 101fd6a1982..7d9db4aaf07 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -502,7 +502,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &k2_sata_sht); } diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index d8dac17dc2c..b8578c32d34 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -242,7 +242,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); pci_intx(pdev, 1); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &uli_sht); } diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 08f65492cc8..101d8c219ca 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -308,7 +308,7 @@ static void svia_noop_freeze(struct ata_port *ap) * certain way. Leave it alone and just clear pending IRQ. */ ap->ops->sff_check_status(ap); - ata_sff_irq_clear(ap); + ata_bmdma_irq_clear(ap); } /** @@ -463,7 +463,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int rc; - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; @@ -520,7 +520,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int i, rc; - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; @@ -628,7 +628,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) svia_configure(pdev); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &svia_sht); } diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 2107952ebff..b777176ff49 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -245,7 +245,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap) qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled = ata_sff_host_intr(ap, qc); + handled = ata_bmdma_port_intr(ap, qc); /* We received an interrupt during a polled command, * or some other spurious condition. Interrupt reporting diff --git a/include/linux/libata.h b/include/linux/libata.h index ee84e7e1203..3bad2701bfa 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -386,6 +386,7 @@ enum { ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */ ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */ ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */ + ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ @@ -513,7 +514,9 @@ struct ata_ioports { void __iomem *command_addr; void __iomem *altstatus_addr; void __iomem *ctl_addr; +#ifdef CONFIG_ATA_BMDMA void __iomem *bmdma_addr; +#endif /* CONFIG_ATA_BMDMA */ void __iomem *scr_addr; }; #endif /* CONFIG_ATA_SFF */ @@ -721,8 +724,10 @@ struct ata_port { u8 ctl; /* cache of ATA control register */ u8 last_ctl; /* Cache last written value */ struct delayed_work sff_pio_task; +#ifdef CONFIG_ATA_BMDMA struct ata_bmdma_prd *bmdma_prd; /* BMDMA SG list */ dma_addr_t bmdma_prd_dma; /* and its DMA mapping */ +#endif /* CONFIG_ATA_BMDMA */ #endif /* CONFIG_ATA_SFF */ unsigned int pio_mask; @@ -856,10 +861,12 @@ struct ata_port_operations { void (*sff_irq_clear)(struct ata_port *); void (*sff_drain_fifo)(struct ata_queued_cmd *qc); +#ifdef CONFIG_ATA_BMDMA void (*bmdma_setup)(struct ata_queued_cmd *qc); void (*bmdma_start)(struct ata_queued_cmd *qc); void (*bmdma_stop)(struct ata_queued_cmd *qc); u8 (*bmdma_status)(struct ata_port *ap); +#endif /* CONFIG_ATA_BMDMA */ #endif /* CONFIG_ATA_SFF */ ssize_t (*em_show)(struct ata_port *ap, char *buf); @@ -1555,7 +1562,6 @@ extern void sata_pmp_error_handler(struct ata_port *ap); #ifdef CONFIG_ATA_SFF extern const struct ata_port_operations ata_sff_port_ops; -extern const struct ata_port_operations ata_bmdma_port_ops; extern const struct ata_port_operations ata_bmdma32_port_ops; /* PIO only, sg_tablesize and dma_boundary limits can be removed */ @@ -1564,11 +1570,6 @@ extern const struct ata_port_operations ata_bmdma32_port_ops; .sg_tablesize = LIBATA_MAX_PRD, \ .dma_boundary = ATA_DMA_BOUNDARY -#define ATA_BMDMA_SHT(drv_name) \ - ATA_BASE_SHT(drv_name), \ - .sg_tablesize = LIBATA_MAX_PRD, \ - .dma_boundary = ATA_DMA_BOUNDARY - extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_sff_check_status(struct ata_port *ap); extern void ata_sff_pause(struct ata_port *ap); @@ -1593,7 +1594,7 @@ extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay); extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc); extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc); -extern unsigned int ata_sff_host_intr(struct ata_port *ap, +extern unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance); extern void ata_sff_lost_interrupt(struct ata_port *ap); @@ -1625,11 +1626,24 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv, int hflags); #endif /* CONFIG_PCI */ +#ifdef CONFIG_ATA_BMDMA + +extern const struct ata_port_operations ata_bmdma_port_ops; + +#define ATA_BMDMA_SHT(drv_name) \ + ATA_BASE_SHT(drv_name), \ + .sg_tablesize = LIBATA_MAX_PRD, \ + .dma_boundary = ATA_DMA_BOUNDARY + extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc); extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc); +extern unsigned int ata_bmdma_port_intr(struct ata_port *ap, + struct ata_queued_cmd *qc); +extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance); extern void ata_bmdma_error_handler(struct ata_port *ap); extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc); +extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void ata_bmdma_setup(struct ata_queued_cmd *qc); extern void ata_bmdma_start(struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); @@ -1640,7 +1654,15 @@ extern int ata_bmdma_port_start32(struct ata_port *ap); #ifdef CONFIG_PCI extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev); extern void ata_pci_bmdma_init(struct ata_host *host); +extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct ata_host **r_host); +extern int ata_pci_bmdma_init_one(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct scsi_host_template *sht, + void *host_priv, int hflags); #endif /* CONFIG_PCI */ +#endif /* CONFIG_ATA_BMDMA */ /** * ata_sff_busy_wait - Wait for a port status register |