diff options
Diffstat (limited to 'drivers/pci/pci_ixp.c')
| -rw-r--r-- | drivers/pci/pci_ixp.c | 612 |
1 files changed, 204 insertions, 408 deletions
diff --git a/drivers/pci/pci_ixp.c b/drivers/pci/pci_ixp.c index 3b303b452..5b5c91548 100644 --- a/drivers/pci/pci_ixp.c +++ b/drivers/pci/pci_ixp.c @@ -1,5 +1,8 @@ /* * IXP PCI Init + * + * (C) Copyright 2011 + * Michael Schwingen, michael@schwingen.org * (C) Copyright 2004 eslab.whut.edu.cn * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com) * @@ -22,7 +25,6 @@ * MA 02111-1307 USA */ - #include <common.h> #include <asm/processor.h> #include <asm/io.h> @@ -30,542 +32,336 @@ #include <asm/arch/ixp425.h> #include <asm/arch/ixp425pci.h> -static void non_prefetch_read (unsigned int addr, unsigned int cmd, - unsigned int *data); -static void non_prefetch_write (unsigned int addr, unsigned int cmd, - unsigned int data); -static void configure_pins (void); -static void sys_pci_gpio_clock_config (void); -static void pci_bus_scan (void); -static int pci_device_exists (unsigned int deviceNo); -static void sys_pci_bar_info_get (unsigned int devnum, unsigned int bus, - unsigned int dev, unsigned int func); -static void sys_pci_device_bars_write (void); -static void calc_bars (PciBar * Bars[], unsigned int nBars, - unsigned int startAddr); +DECLARE_GLOBAL_DATA_PTR; + +static void non_prefetch_read(unsigned int addr, unsigned int cmd, + unsigned int *data); +static void non_prefetch_write(unsigned int addr, unsigned int cmd, + unsigned int data); + +/*define the sub vendor and subsystem to be used */ +#define IXP425_PCI_SUB_VENDOR_SYSTEM 0x00000000 #define PCI_MEMORY_BUS 0x00000000 -#define PCI_MEMORY_PHY 0x48000000 +#define PCI_MEMORY_PHY 0x00000000 #define PCI_MEMORY_SIZE 0x04000000 -#define PCI_MEM_BUS 0x40000000 +#define PCI_MEM_BUS 0x48000000 #define PCI_MEM_PHY 0x00000000 #define PCI_MEM_SIZE 0x04000000 -#define PCI_IO_BUS 0x40000000 -#define PCI_IO_PHY 0x50000000 -#define PCI_IO_SIZE 0x10000000 +#define PCI_IO_BUS 0x00000000 +#define PCI_IO_PHY 0x00000000 +#define PCI_IO_SIZE 0x00010000 + +/* build address value for config sycle */ +static unsigned int pci_config_addr(pci_dev_t bdf, unsigned int reg) +{ + unsigned int bus = PCI_BUS(bdf); + unsigned int dev = PCI_DEV(bdf); + unsigned int func = PCI_FUNC(bdf); + unsigned int addr; + + if (bus) { /* secondary bus, use type 1 config cycle */ + addr = bdf | (reg & ~3) | 1; + } else { + /* + primary bus, type 0 config cycle. address bits 31:28 + specify the device 10:8 specify the function + */ + addr = BIT((31 - dev)) | (func << 8) | (reg & ~3); + } + + return addr; +} + +static int pci_config_status(void) +{ + unsigned int regval; -struct pci_controller hose; + regval = readl(PCI_CSR_BASE + PCI_ISR_OFFSET); + if ((regval & PCI_ISR_PFE) == 0) + return OK; -unsigned int nDevices; -unsigned int nMBars; -unsigned int nIOBars; -PciBar *memBars[IXP425_PCI_MAX_BAR]; -PciBar *ioBars[IXP425_PCI_MAX_BAR]; -PciDevice devices[IXP425_PCI_MAX_FUNC_ON_BUS]; + /* no device present, make sure that the master abort bit is reset */ + writel(PCI_ISR_PFE, PCI_CSR_BASE + PCI_ISR_OFFSET); + return ERROR; +} -int pci_read_config_dword (pci_dev_t dev, int where, unsigned int *val) +static int pci_ixp_hose_read_config_dword(struct pci_controller *hose, + pci_dev_t bdf, int where, unsigned int *val) { unsigned int retval; unsigned int addr; + int stat; - /*address bits 31:28 specify the device 10:8 specify the function */ + debug("pci_ixp_hose_read_config_dword: bdf %x, reg %x", bdf, where); /*Set the address to be read */ - addr = BIT ((31 - dev)) | (where & ~3); - non_prefetch_read (addr, NP_CMD_CONFIGREAD, &retval); - + addr = pci_config_addr(bdf, where); + non_prefetch_read(addr, NP_CMD_CONFIGREAD, &retval); *val = retval; - return (OK); + stat = pci_config_status(); + if (stat < 0) + *val = -1; + debug("-> val %x, status %x\n", *val, stat); + return stat; } -int pci_read_config_word (pci_dev_t dev, int where, unsigned short *val) +static int pci_ixp_hose_read_config_word(struct pci_controller *hose, + pci_dev_t bdf, int where, unsigned short *val) { unsigned int n; unsigned int retval; unsigned int addr; unsigned int byteEnables; + int stat; + debug("pci_ixp_hose_read_config_word: bdf %x, reg %x", bdf, where); n = where % 4; /*byte enables are 4 bits active low, the position of each bit maps to the byte that it enables */ byteEnables = - (~(BIT (n) | BIT ((n + 1)))) & + (~(BIT(n) | BIT((n + 1)))) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; byteEnables = byteEnables << PCI_NP_CBE_BESL; - /*address bits 31:28 specify the device 10:8 specify the function */ /*Set the address to be read */ - addr = BIT ((31 - dev)) | (where & ~3); - non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval); + addr = pci_config_addr(bdf, where); + non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD, &retval); /*Pick out the word we are interested in */ - *val = (retval >> (8 * n)); + *val = retval >> (8 * n); - return (OK); + stat = pci_config_status(); + if (stat < 0) + *val = -1; + debug("-> val %x, status %x\n", *val, stat); + return stat; } -int pci_read_config_byte (pci_dev_t dev, int where, unsigned char *val) +static int pci_ixp_hose_read_config_byte(struct pci_controller *hose, + pci_dev_t bdf, int where, unsigned char *val) { unsigned int retval; unsigned int n; unsigned int byteEnables; unsigned int addr; + int stat; + debug("pci_ixp_hose_read_config_byte: bdf %x, reg %x", bdf, where); n = where % 4; /*byte enables are 4 bits, active low, the position of each bit maps to the byte that it enables */ - byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; + byteEnables = (~BIT(n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; byteEnables = byteEnables << PCI_NP_CBE_BESL; - /*address bits 31:28 specify the device, 10:8 specify the function */ /*Set the address to be read */ - addr = BIT ((31 - dev)) | (where & ~3); - non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval); + addr = pci_config_addr(bdf, where); + non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD, &retval); /*Pick out the byte we are interested in */ - *val = (retval >> (8 * n)); + *val = retval >> (8 * n); - return (OK); + stat = pci_config_status(); + if (stat < 0) + *val = -1; + debug("-> val %x, status %x\n", *val, stat); + return stat; } -int pci_write_config_byte (pci_dev_t dev, int where, unsigned char val) +static int pci_ixp_hose_write_config_byte(struct pci_controller *hose, + pci_dev_t bdf, int where, unsigned char val) { unsigned int addr; unsigned int byteEnables; unsigned int n; unsigned int ldata; + int stat; + debug("pci_ixp_hose_write_config_byte: bdf %x, reg %x, val %x", + bdf, where, val); n = where % 4; /*byte enables are 4 bits active low, the position of each bit maps to the byte that it enables */ - byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; + byteEnables = (~BIT(n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; byteEnables = byteEnables << PCI_NP_CBE_BESL; ldata = val << (8 * n); - /*address bits 31:28 specify the device 10:8 specify the function */ /*Set the address to be written */ - addr = BIT ((31 - dev)) | (where & ~3); - non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata); + addr = pci_config_addr(bdf, where); + non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE, ldata); - return (OK); + stat = pci_config_status(); + debug("-> status %x\n", stat); + return stat; } -int pci_write_config_word (pci_dev_t dev, int where, unsigned short val) +static int pci_ixp_hose_write_config_word(struct pci_controller *hose, + pci_dev_t bdf, int where, unsigned short val) { unsigned int addr; unsigned int byteEnables; unsigned int n; unsigned int ldata; + int stat; + debug("pci_ixp_hose_write_config_word: bdf %x, reg %x, val %x", + bdf, where, val); n = where % 4; /*byte enables are 4 bits active low, the position of each bit maps to the byte that it enables */ byteEnables = - (~(BIT (n) | BIT ((n + 1)))) & + (~(BIT(n) | BIT((n + 1)))) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; byteEnables = byteEnables << PCI_NP_CBE_BESL; ldata = val << (8 * n); - /*address bits 31:28 specify the device 10:8 specify the function */ /*Set the address to be written */ - addr = BIT (31 - dev) | (where & ~3); - non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata); + addr = pci_config_addr(bdf, where); + non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE, ldata); - return (OK); + stat = pci_config_status(); + debug("-> status %x\n", stat); + return stat; } -int pci_write_config_dword (pci_dev_t dev, int where, unsigned int val) +static int pci_ixp_hose_write_config_dword(struct pci_controller *hose, + pci_dev_t bdf, int where, unsigned int val) { unsigned int addr; + int stat; - /*address bits 31:28 specify the device 10:8 specify the function */ + debug("pci_ixp_hose_write_config_dword: bdf %x, reg %x, val %x", + bdf, where, val); /*Set the address to be written */ - addr = BIT (31 - dev) | (where & ~3); - non_prefetch_write (addr, NP_CMD_CONFIGWRITE, val); + addr = pci_config_addr(bdf, where); + non_prefetch_write(addr, NP_CMD_CONFIGWRITE, val); - return (OK); + stat = pci_config_status(); + debug("-> status %x\n", stat); + return stat; } -void non_prefetch_read (unsigned int addr, - unsigned int cmd, unsigned int *data) +static void non_prefetch_read(unsigned int addr, + unsigned int cmd, unsigned int *data) { - REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr); + writel(addr, PCI_CSR_BASE + PCI_NP_AD_OFFSET); /*set up and execute the read */ - REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd); + writel(cmd, PCI_CSR_BASE + PCI_NP_CBE_OFFSET); /*The result of the read is now in np_rdata */ - REG_READ (PCI_CSR_BASE, PCI_NP_RDATA_OFFSET, *data); + *data = readl(PCI_CSR_BASE + PCI_NP_RDATA_OFFSET); return; } -void non_prefetch_write (unsigned int addr, - unsigned int cmd, unsigned int data) +static void non_prefetch_write(unsigned int addr, + unsigned int cmd, unsigned int data) { - REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr); + writel(addr, PCI_CSR_BASE + PCI_NP_AD_OFFSET); /*set up the write */ - REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd); + writel(cmd, PCI_CSR_BASE + PCI_NP_CBE_OFFSET); /*Execute the write by writing to NP_WDATA */ - REG_WRITE (PCI_CSR_BASE, PCI_NP_WDATA_OFFSET, data); + writel(data, PCI_CSR_BASE + PCI_NP_WDATA_OFFSET); return; } -/* - * PCI controller config registers are accessed through these functions - * i.e. these allow us to set up our own BARs etc. - */ -void crp_read (unsigned int offset, unsigned int *data) +static void crp_write(unsigned int offset, unsigned int data) { - REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET, offset); - REG_READ (PCI_CSR_BASE, PCI_CRP_RDATA_OFFSET, *data); -} - -void crp_write (unsigned int offset, unsigned int data) -{ - /*The CRP address register bit 16 indicates that we want to do a write */ - REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET, - PCI_CRP_WRITE | offset); - REG_WRITE (PCI_CSR_BASE, PCI_CRP_WDATA_OFFSET, data); -} - -/*struct pci_controller *hose*/ -void pci_ixp_init (struct pci_controller *hose) -{ - unsigned int regval; - - hose->first_busno = 0; - hose->last_busno = 0x00; - - /* System memory space */ - pci_set_region (hose->regions + 0, - PCI_MEMORY_BUS, - PCI_MEMORY_PHY, PCI_MEMORY_SIZE, PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region (hose->regions + 1, - PCI_MEM_BUS, - PCI_MEM_PHY, PCI_MEM_SIZE, PCI_REGION_MEM); - /* PCI I/O space */ - pci_set_region (hose->regions + 2, - PCI_IO_BUS, PCI_IO_PHY, PCI_IO_SIZE, PCI_REGION_IO); - - hose->region_count = 3; - - pci_register_hose (hose); - -/* - ========================================================== - Init IXP PCI - ========================================================== -*/ - REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval); - regval |= 1 << 2; - REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval); - - configure_pins (); - - READ_GPIO_REG (IXP425_GPIO_GPOUTR, regval); - WRITE_GPIO_REG (IXP425_GPIO_GPOUTR, regval & (~(1 << 13))); - udelay (533); - sys_pci_gpio_clock_config (); - REG_WRITE (PCI_CSR_BASE, PCI_INTEN_OFFSET, 0); - udelay (100); - READ_GPIO_REG (IXP425_GPIO_GPOUTR, regval); - WRITE_GPIO_REG (IXP425_GPIO_GPOUTR, regval | (1 << 13)); - udelay (533); - crp_write (PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_0_DEFAULT); - crp_write (PCI_CFG_BASE_ADDRESS_1, IXP425_PCI_BAR_1_DEFAULT); - crp_write (PCI_CFG_BASE_ADDRESS_2, IXP425_PCI_BAR_2_DEFAULT); - crp_write (PCI_CFG_BASE_ADDRESS_3, IXP425_PCI_BAR_3_DEFAULT); - crp_write (PCI_CFG_BASE_ADDRESS_4, IXP425_PCI_BAR_4_DEFAULT); - crp_write (PCI_CFG_BASE_ADDRESS_5, IXP425_PCI_BAR_5_DEFAULT); - /*Setup PCI-AHB and AHB-PCI address mappings */ - REG_WRITE (PCI_CSR_BASE, PCI_AHBMEMBASE_OFFSET, - IXP425_PCI_AHBMEMBASE_DEFAULT); - - REG_WRITE (PCI_CSR_BASE, PCI_AHBIOBASE_OFFSET, - IXP425_PCI_AHBIOBASE_DEFAULT); - - REG_WRITE (PCI_CSR_BASE, PCI_PCIMEMBASE_OFFSET, - IXP425_PCI_PCIMEMBASE_DEFAULT); - - crp_write (PCI_CFG_SUB_VENDOR_ID, IXP425_PCI_SUB_VENDOR_SYSTEM); - - REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval); - regval |= PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS; - REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval); - crp_write (PCI_CFG_COMMAND, PCI_CFG_CMD_MAE | PCI_CFG_CMD_BME); - udelay (1000); - - pci_write_config_word (0, PCI_CFG_COMMAND, INITIAL_PCI_CMD); - REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE - | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE); -#ifdef CONFIG_PCI_SCAN_SHOW - printf ("Device bus dev func deviceID vendorID \n"); -#endif - pci_bus_scan (); -} - -void configure_pins (void) -{ - unsigned int regval; - - /* Disable clock on GPIO PIN 14 */ - READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval); - WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval & (~(1 << 8))); - READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval); - - READ_GPIO_REG (IXP425_GPIO_GPOER, regval); - WRITE_GPIO_REG (IXP425_GPIO_GPOER, - (((~(3 << 13)) & regval) | (0xf << 8))); - READ_GPIO_REG (IXP425_GPIO_GPOER, regval); - - READ_GPIO_REG (IXP425_GPIO_GPIT2R, regval); - WRITE_GPIO_REG (IXP425_GPIO_GPIT2R, - (regval & - ((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1))); - READ_GPIO_REG (IXP425_GPIO_GPIT2R, regval); - - READ_GPIO_REG (IXP425_GPIO_GPISR, regval); - WRITE_GPIO_REG (IXP425_GPIO_GPISR, (regval | (0xf << 8))); - READ_GPIO_REG (IXP425_GPIO_GPISR, regval); + /* + * The CRP address register bit 16 indicates that we want to do a + * write + */ + writel(PCI_CRP_WRITE | offset, PCI_CSR_BASE + PCI_CRP_AD_CBE_OFFSET); + writel(data, PCI_CSR_BASE + PCI_CRP_WDATA_OFFSET); } -void sys_pci_gpio_clock_config (void) +void pci_ixp_init(struct pci_controller *hose) { - unsigned int regval; - - READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval); - regval |= 0x1 << 4; - WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval); - READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval); - regval |= 0x1 << 8; - WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval); -} + unsigned int csr; -void pci_bus_scan (void) -{ - unsigned int bus = 0, dev, func = 0; - unsigned short data16; - unsigned int data32; - unsigned char intPin; - - /* Assign first device to ourselves */ - devices[0].bus = 0; - devices[0].device = 0; - devices[0].func = 0; - - crp_read (PCI_CFG_VENDOR_ID, &data32); - - devices[0].vendor_id = data32 & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK; - devices[0].device_id = data32 >> 16; - devices[0].error = FALSE; - devices[0].bar[NO_BAR].size = 0; /*dummy - required */ - - nDevices = 1; - - nMBars = 0; - nIOBars = 0; - - for (dev = 0; dev < IXP425_PCI_MAX_DEV; dev++) { - - /*Check whether a device is present */ - if (pci_device_exists (dev) != TRUE) { - - /*Clear error bits in ISR, write 1 to clear */ - REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE - | PCI_ISR_PFE | PCI_ISR_PPE | - PCI_ISR_AHBE); - continue; - } - - /*A device is present, add an entry to the array */ - devices[nDevices].bus = bus; - devices[nDevices].device = dev; - devices[nDevices].func = func; - - pci_read_config_word (dev, PCI_CFG_VENDOR_ID, &data16); - - devices[nDevices].vendor_id = data16; - - pci_read_config_word (dev, PCI_CFG_DEVICE_ID, &data16); - devices[nDevices].device_id = data16; - - /*The device is functioning correctly, set error to FALSE */ - devices[nDevices].error = FALSE; - - /*Figure out what BARs are on this device */ - sys_pci_bar_info_get (nDevices, bus, dev, func); - /*Figure out what INTX# line the card uses */ - pci_read_config_byte (dev, PCI_CFG_DEV_INT_PIN, &intPin); - - /*assign the appropriate irq line */ - if (intPin > PCI_IRQ_LINES) { - devices[nDevices].error = TRUE; - } else if (intPin != 0) { - /*This device uses an interrupt line */ - /*devices[nDevices].irq = ixp425PciIntTranslate[dev][intPin-1]; */ - devices[nDevices].irq = intPin; - } -#ifdef CONFIG_PCI_SCAN_SHOW - printf ("%06d %03d %03d %04d %08d %08x\n", nDevices, - devices[nDevices].vendor_id); + /* + * Specify that the AHB bus is operating in big endian mode. Set up + * byte lane swapping between little-endian PCI and the big-endian + * AHB bus + */ +#ifdef __ARMEB__ + csr = PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; +#else + csr = PCI_CSR_ABE; #endif - nDevices++; - - } - - calc_bars (memBars, nMBars, IXP425_PCI_BAR_MEM_BASE); - sys_pci_device_bars_write (); - - REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE - | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE); -} - -void sys_pci_bar_info_get (unsigned int devnum, - unsigned int bus, - unsigned int dev, unsigned int func) -{ - unsigned int data32; - unsigned int tmp; - unsigned int size; - - pci_write_config_dword (devnum, - PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_QUERY); - pci_read_config_dword (devnum, PCI_CFG_BASE_ADDRESS_0, &data32); + writel(csr, PCI_CSR_BASE + PCI_CSR_OFFSET); - devices[devnum].bar[0].address = (data32 & 1); + writel(0, PCI_CSR_BASE + PCI_INTEN_OFFSET); - if (data32 & 1) { - /* IO space */ - tmp = data32 & ~0x3; - size = ~(tmp - 1); - devices[devnum].bar[0].size = size; - - if (nIOBars < IXP425_PCI_MAX_BAR) { - ioBars[nIOBars++] = &devices[devnum].bar[0]; - } - } else { - /* Mem space */ - tmp = data32 & ~IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK; - size = ~(tmp - 1); - devices[devnum].bar[0].size = size; - - if (nMBars < IXP425_PCI_MAX_BAR) { - memBars[nMBars++] = &devices[devnum].bar[0]; - } else { - devices[devnum].error = TRUE; - } - - } - - devices[devnum].bar[1].size = 0; -} - -void sortBars (PciBar * Bars[], unsigned int nBars) -{ - unsigned int i, j; - PciBar *tmp; - - if (nBars == 0) { - return; - } - - /* Sort biggest to smallest */ - for (i = 0; i < nBars - 1; i++) { - for (j = i + 1; j < nBars; j++) { - if (Bars[j]->size > Bars[i]->size) { - /* swap them */ - tmp = Bars[i]; - Bars[i] = Bars[j]; - Bars[j] = tmp; - } - } - } -} + /* + * We configure the PCI inbound memory windows to be + * 1:1 mapped to SDRAM + */ + crp_write(PCI_CFG_BASE_ADDRESS_0, 0x00000000); + crp_write(PCI_CFG_BASE_ADDRESS_1, 0x01000000); + crp_write(PCI_CFG_BASE_ADDRESS_2, 0x02000000); + crp_write(PCI_CFG_BASE_ADDRESS_3, 0x03000000); + + /* + * Enable CSR window at 64 MiB to allow PCI masters + * to continue prefetching past 64 MiB boundary. + */ + crp_write(PCI_CFG_BASE_ADDRESS_4, 0x04000000); + /* + * Enable the IO window to be way up high, at 0xfffffc00 + */ + crp_write(PCI_CFG_BASE_ADDRESS_5, 0xfffffc01); -void calc_bars (PciBar * Bars[], unsigned int nBars, unsigned int startAddr) -{ - unsigned int i; + /*Setup PCI-AHB and AHB-PCI address mappings */ + writel(0x00010203, PCI_CSR_BASE + PCI_AHBMEMBASE_OFFSET); - if (nBars == 0) { - return; - } + writel(0x00000000, PCI_CSR_BASE + PCI_AHBIOBASE_OFFSET); - for (i = 0; i < nBars; i++) { - Bars[i]->address |= startAddr; - startAddr += Bars[i]->size; - } -} + writel(0x48494a4b, PCI_CSR_BASE + PCI_PCIMEMBASE_OFFSET); -void sys_pci_device_bars_write (void) -{ - unsigned int i; - int addr; - - for (i = 1; i < nDevices; i++) { - if (devices[i].error) { - continue; - } - - pci_write_config_dword (devices[i].device, - PCI_CFG_BASE_ADDRESS_0, - devices[i].bar[0].address); - addr = BIT (31 - devices[i].device) | - (0 << PCI_NP_AD_FUNCSL) | - (PCI_CFG_BASE_ADDRESS_0 & ~3); - pci_write_config_dword (devices[i].device, - PCI_CFG_DEV_INT_LINE, devices[i].irq); - - pci_write_config_word (devices[i].device, - PCI_CFG_COMMAND, INITIAL_PCI_CMD); + crp_write(PCI_CFG_SUB_VENDOR_ID, IXP425_PCI_SUB_VENDOR_SYSTEM); - } -} + crp_write(PCI_CFG_COMMAND, PCI_CFG_CMD_MAE | PCI_CFG_CMD_BME); + udelay(1000); + /* clear error bits in status register */ + writel(PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE, + PCI_CSR_BASE + PCI_ISR_OFFSET); -int pci_device_exists (unsigned int deviceNo) -{ - unsigned int vendorId; - unsigned int regval; - - pci_read_config_dword (deviceNo, PCI_CFG_VENDOR_ID, &vendorId); - - /* There are two ways to find out an empty device. - * 1. check Master Abort bit after the access. - * 2. check whether the vendor id read back is 0x0. + /* + * Set Initialize Complete in PCI Control Register: allow IXP4XX to + * respond to PCI configuration cycles. */ - REG_READ (PCI_CSR_BASE, PCI_ISR_OFFSET, regval); - if ((vendorId != 0x0) && ((regval & PCI_ISR_PFE) == 0)) { - return TRUE; - } - /*no device present, make sure that the master abort bit is reset */ + csr |= PCI_CSR_IC; + writel(csr, PCI_CSR_BASE + PCI_CSR_OFFSET); - REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PFE); - return FALSE; -} + hose->first_busno = 0; + hose->last_busno = 0; -pci_dev_t pci_find_devices (struct pci_device_id * ids, int devNo) -{ - unsigned int i; - unsigned int devdidvid; - unsigned int didvid; - unsigned int vendorId, deviceId; + /* System memory space */ + pci_set_region(hose->regions + 0, + PCI_MEMORY_BUS, + PCI_MEMORY_PHY, PCI_MEMORY_SIZE, PCI_REGION_SYS_MEMORY); - vendorId = ids->vendor; - deviceId = ids->device; - didvid = ((deviceId << 16) & IXP425_PCI_TOP_WORD_OF_LONG_MASK) | - (vendorId & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK); + /* PCI memory space */ + pci_set_region(hose->regions + 1, + PCI_MEM_BUS, + PCI_MEM_PHY, PCI_MEM_SIZE, PCI_REGION_MEM); + /* PCI I/O space */ + pci_set_region(hose->regions + 2, + PCI_IO_BUS, PCI_IO_PHY, PCI_IO_SIZE, PCI_REGION_IO); - for (i = devNo + 1; i < nDevices; i++) { + hose->region_count = 3; - pci_read_config_dword (devices[i].device, PCI_CFG_VENDOR_ID, - &devdidvid); + pci_set_ops(hose, + pci_ixp_hose_read_config_byte, + pci_ixp_hose_read_config_word, + pci_ixp_hose_read_config_dword, + pci_ixp_hose_write_config_byte, + pci_ixp_hose_write_config_word, + pci_ixp_hose_write_config_dword); - if (devdidvid == didvid) { - return devices[i].device; - } - } - return -1; + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); } |